From c03fb49f5ba1828ae3f99c3f817255fabc9ba823 Mon Sep 17 00:00:00 2001 From: Michael Tremer Date: Thu, 3 Jul 2025 15:02:14 +0000 Subject: [PATCH] langs: Sort Chinese translations alphabetically Signed-off-by: Michael Tremer --- langs/tw/cgi-bin/tw.pl | 20 ++++++-------------- langs/zh/cgi-bin/zh.pl | 20 ++++++-------------- 2 files changed, 12 insertions(+), 28 deletions(-) diff --git a/langs/tw/cgi-bin/tw.pl b/langs/tw/cgi-bin/tw.pl index a18bf8440..90fa81af0 100644 --- a/langs/tw/cgi-bin/tw.pl +++ b/langs/tw/cgi-bin/tw.pl @@ -1,4 +1,4 @@ -%tr = ( +%tr = ( %tr, '24 hours' => '24小時', @@ -424,7 +424,6 @@ 'alcatelusb help' => '要使用Speedtouch 330或Speedtouch USB數據機，必須將固件上傳到IPFire中。 請從speedtouch.com下載SpeedTouch 330的嵌入式固件程序包，解壓縮，然後使用以下格式上傳適用於您數據機的文件: 使用以下形式，當Rev<4時為KQD6_3.xxx，Rev=4則為ZZZL_3.xxx。', 'alcatelusb upload' => '上傳Speedtouch USB固件', 'alias ip' => '別名IP', -'aliases' => '別名', 'aliases' => '別名管理', 'aliases not active' => '除非您的紅色接口為靜態，否則別名將不起作用', 'all' => '全部', @@ -1079,7 +1078,7 @@ 'external access rule changed' => '外部訪問規則已更改； 重新啟動訪問控制器', 'external access rule removed' => ' 外部訪問規則已刪除； 重新啟動訪問控制器', 'external aliases configuration' => '外部別名配置', -'extrahd' => '掛載磁碟', +'extrahd' => '外部磁碟', 'extrahd because it it outside the allowed mount path' => ', 因為它位於允許的掛載路徑之外', 'extrahd because there is already a device mounted' => ', 因為已經有一個設備掛載', 'extrahd cant umount' => '無法卸載', @@ -1148,7 +1147,7 @@ 'force enable' => '強制', 'force update' => '強制更新', 'force user' => '強制所所有新文件發送給用戶', -'foreshadow' => 'Foreshadow',, +'foreshadow' => 'Foreshadow', 'forward firewall' => '防火牆', 'forwarding rule added' => '添加轉發規則； 重新啟動轉發器', 'forwarding rule removed' => '轉發規則已刪除； 重新啟動轉發器', @@ -1642,7 +1641,7 @@ 'ips throughput' => '吞吐量', 'ipsec' => 'IPsec', 'ipsec connection' => 'IPsec連接', -'ipsec dns server address is invalid' =>' DNS伺服器地址無效', +'ipsec dns server address is invalid' => ' DNS伺服器地址無效', 'ipsec interface mode gre' => 'GRE', 'ipsec interface mode none' => '- 無（默認） -', 'ipsec interface mode vti' => 'VTI', @@ -1807,6 +1806,7 @@ 'mbmon temp in' => 'Temperature in', 'mbmon value' => '值', 'mbmon volt' => 'Voltage', +'mdstat' => '磁碟陣列', 'meaning' => 'meaning', 'media' => '硬碟狀態', 'media information' => '硬碟信息', @@ -2094,10 +2094,8 @@ 'pakfire available addons' => '可用插件:', 'pakfire check deps' => '正在檢查依賴項...', 'pakfire configuration' => 'Pakfire配置', -'pakfire core update auto' => '自動安裝核心和插件更新：', 'pakfire core update auto' => '自動安裝核心和附加更新：', 'pakfire core update level' => '核心更新版本', -'pakfire finished' => 'Pakfire完成！ 返回...', 'pakfire finished' => 'Pakfire 已完結！正在返回……', 'pakfire finished error' => 'Pakfire完成！ 但發生錯誤，請在繼續之前檢查日誌。', 'pakfire health check' => '檢查鏡像是否可達(ping):', @@ -2110,7 +2108,6 @@ 'pakfire last package update' => '上一次插件列表更新是在', 'pakfire last serverlist update' => '上一次伺服器列表更新是在', 'pakfire last update' => '上一次更新是在', -'pakfire possible dependency' => '可能會有一些依賴的軟體包，這是需要安裝的軟體包的列表。', 'pakfire possible dependency' => '這是需要安裝的包的列表。', 'pakfire refresh list' => '刷新列表', 'pakfire register' => '在pakfire伺服器上註冊:', @@ -2126,8 +2123,6 @@ 'pakfire uninstall package' => '您要卸載以下插件: ', 'pakfire update daily' => '每天搜索更新:', 'pakfire upgrade' => '更新', -'pakfire upgrade' => '更新', -'pakfire upgrades' => '可用更新：', 'pakfire upgrades' => '可用更新:', 'pakfire working' => 'Pakfire正在運行...請等待所有操作成功完成。', 'pap or chap' => 'PAP或CHAP', @@ -2137,7 +2132,6 @@ 'password contains illegal characters' => '密碼包含非法字符。', 'password crypting key' => '密碼加密密鑰', 'password not set' => '密碼沒設置', -'password too short' => '密碼太短。', 'password too short' => '密碼太短了', 'passwords do not match' => '密碼不匹配。', 'passwords must be at least 6 characters in length' => '密碼長度至少為6個字符', @@ -2222,6 +2216,7 @@ 'qos graphs' => 'Qos圖表', 'qos warning' => '規則必須保存，否則將被丟棄!', 'qr code' => '二維碼', +'quality of service' => '服務質量', 'quick control' => '快速控制', 'quick playlist' => '快速播放列表', 'ram' => 'RAM', @@ -3221,9 +3216,6 @@ 'zoneconf val vlan tag assignment error' => '每個NIC不能多次使用同一個VLAN標識。', 'zoneconf val vlan tag range error' => 'VLAN標識必須在1-4094之間。', 'zoneconf val zoneslave amount error' => '未處於橋接模式的區域不能分配多個NIC', -'quality of service' => '服務質量', -'extrahd' => '外部磁碟', -'mdstat' => '磁碟陣列', ); #EOF diff --git a/langs/zh/cgi-bin/zh.pl b/langs/zh/cgi-bin/zh.pl index 691dfa318..9ba8a2cab 100644 --- a/langs/zh/cgi-bin/zh.pl +++ b/langs/zh/cgi-bin/zh.pl @@ -1,4 +1,4 @@ -%tr = ( +%tr = ( %tr, '24 hours' => '24小时', @@ -424,7 +424,6 @@ 'alcatelusb help' => '要使用Speedtouch 330或Speedtouch USB调制解调器，必须将固件上传到IPFire中。 请从speedtouch.com下载SpeedTouch 330的嵌入式固件程序包，解压缩，然后使用以下格式上传适用于您调制解调器的文件: 使用以下形式，当Rev<4时为KQD6_3.xxx，Rev=4则为ZZZL_3.xxx。', 'alcatelusb upload' => '上传Speedtouch USB固件', 'alias ip' => '别名IP', -'aliases' => '别名', 'aliases' => '别名管理', 'aliases not active' => '除非您的红色接口为静态，否则别名将不起作用', 'all' => '全部', @@ -1079,7 +1078,7 @@ 'external access rule changed' => '外部访问规则已更改； 重新启动访问控制器', 'external access rule removed' => ' 外部访问规则已删除； 重新启动访问控制器', 'external aliases configuration' => '外部别名配置', -'extrahd' => '挂载磁盘', +'extrahd' => '外部磁盘', 'extrahd because it it outside the allowed mount path' => ', 因为它位于允许的挂载路径之外', 'extrahd because there is already a device mounted' => ', 因为已经有一个设备挂载', 'extrahd cant umount' => '无法卸载', @@ -1148,7 +1147,7 @@ 'force enable' => '强制', 'force update' => '强制更新', 'force user' => '强制所所有新文件发送给用户', -'foreshadow' => 'Foreshadow',, +'foreshadow' => 'Foreshadow', 'forward firewall' => '防火墙', 'forwarding rule added' => '添加转发规则； 重新启动转发器', 'forwarding rule removed' => '转发规则已删除； 重新启动转发器', @@ -1642,7 +1641,7 @@ 'ips throughput' => '吞吐量', 'ipsec' => 'IPsec', 'ipsec connection' => 'IPsec连接', -'ipsec dns server address is invalid' =>' DNS服务器地址无效', +'ipsec dns server address is invalid' => ' DNS服务器地址无效', 'ipsec interface mode gre' => 'GRE', 'ipsec interface mode none' => '- 无（默认） -', 'ipsec interface mode vti' => 'VTI', @@ -1807,6 +1806,7 @@ 'mbmon temp in' => 'Temperature in', 'mbmon value' => '值', 'mbmon volt' => 'Voltage', +'mdstat' => '磁盘阵列', 'meaning' => 'meaning', 'media' => '硬盘状态', 'media information' => '硬盘信息', @@ -2094,10 +2094,8 @@ 'pakfire available addons' => '可用插件:', 'pakfire check deps' => '正在检查依赖项...', 'pakfire configuration' => 'Pakfire配置', -'pakfire core update auto' => '自动安装核心和插件更新：', 'pakfire core update auto' => '自动安装核心和附加更新：', 'pakfire core update level' => '核心更新版本', -'pakfire finished' => 'Pakfire完成！ 返回...', 'pakfire finished' => 'Pakfire 已完结！正在返回……', 'pakfire finished error' => 'Pakfire完成！ 但发生错误，请在继续之前检查日志。', 'pakfire health check' => '检查镜像是否可达(ping):', @@ -2110,7 +2108,6 @@ 'pakfire last package update' => '上一次插件列表更新是在', 'pakfire last serverlist update' => '上一次服务器列表更新是在', 'pakfire last update' => '上一次更新是在', -'pakfire possible dependency' => '可能会有一些依赖的软件包，这是需要安装的软件包的列表。', 'pakfire possible dependency' => '这是需要安装的包的列表。', 'pakfire refresh list' => '刷新列表', 'pakfire register' => '在pakfire服务器上注册:', @@ -2126,8 +2123,6 @@ 'pakfire uninstall package' => '您要卸载以下插件: ', 'pakfire update daily' => '每天搜索更新:', 'pakfire upgrade' => '更新', -'pakfire upgrade' => '更新', -'pakfire upgrades' => '可用更新：', 'pakfire upgrades' => '可用更新:', 'pakfire working' => 'Pakfire正在运行...请等待所有操作成功完成。', 'pap or chap' => 'PAP或CHAP', @@ -2137,7 +2132,6 @@ 'password contains illegal characters' => '密码包含非法字符。', 'password crypting key' => '密码加密密钥', 'password not set' => '密码没设置', -'password too short' => '密码太短。', 'password too short' => '密码太短了', 'passwords do not match' => '密码不匹配。', 'passwords must be at least 6 characters in length' => '密码长度至少为6个字符', @@ -2222,6 +2216,7 @@ 'qos graphs' => 'Qos图表', 'qos warning' => '规则必须保存，否则将被丢弃!', 'qr code' => '二维码', +'quality of service' => '服务质量', 'quick control' => '快速控制', 'quick playlist' => '快速播放列表', 'ram' => 'RAM', @@ -3221,9 +3216,6 @@ 'zoneconf val vlan tag assignment error' => '每个NIC不能多次使用同一个VLAN标识。', 'zoneconf val vlan tag range error' => 'VLAN标识必须在1-4094之间。', 'zoneconf val zoneslave amount error' => '未处于桥接模式的区域不能分配多个NIC', -'quality of service' => '服务质量', -'extrahd' => '外部磁盘', -'mdstat' => '磁盘阵列', ); #EOF -- 2.47.3