From cc3cfef3e3d942f73fe8adc26105bccdb296ec52 Mon Sep 17 00:00:00 2001 From: Isaev Ruslan Date: Wed, 15 Nov 2023 18:38:53 +0300 Subject: [PATCH] arm64: dts: qcom: ipq6018: add QUP5 I2C node Add node to support this bus inside of IPQ6018. For example, this bus is used to work with the voltage regulator (mp5496) on the Yuncore AX840 wireless AP. Signed-off-by: Isaev Ruslan Link: https://lore.kernel.org/r/CACDmYyfOe-jcgj4BAD8=pr08sHpOF=+FRcwrouuLAVsa4+zwtw@mail.gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index e84adf14be24d..48ec0bef54016 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -584,6 +584,21 @@ status = "disabled"; }; + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078ba000 0x0 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>; -- 2.39.5