From e12953d3b126dbff40a8531b99c377d653f0e27d Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 30 Jul 2024 20:24:43 -0700 Subject: [PATCH] arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports The SC8180X Primus comes with an AUX card with two USB ports, fed by the two multiport ports. Enable the involved nodes and define two always-on regulators to enable VBUS for these ports. Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-6-a7dc4265b553@quicinc.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 60 +++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index 65d923497a057..9447c1e4577b0 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -223,6 +223,32 @@ vin-supply = <&vph_pwr>; }; + vreg_usb2_host_en: regulator-usb2-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb2_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + + vreg_usb3_host_en: regulator-usb3-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb3_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + usbprim-sbu-mux { compatible = "pericom,pi3usb102", "gpio-sbu-mux"; @@ -623,6 +649,40 @@ status = "okay"; }; +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + &usb_prim_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; -- 2.47.2