]> git.ipfire.org Git - thirdparty/u-boot.git/shortlog
thirdparty/u-boot.git
2018-02-23  Siva Durga... pytest: qspi: Fix issues with qspi_write_twice
2018-02-23  Siva Durga... zynqmp: Change kernel and fdt offsets in default enviro...
2018-02-22  Michal Simekclk: zynqmp: Add new compatible string for clock driver
2018-02-21  Michal Simekclk: zynq: Show watchdog clock rate properly
2018-02-21  Rajan Vajasoc: zynqmp: Update required API version to 1.0
2018-02-21  Nitin Jainfpga: zynqmp: Add support to get the PCAP status for...
2018-02-21  Siva Durga... arm64: zynqmp: Split emmc configuration into emmc0...
2018-02-21  Siva Durga... net: zynq_gem: Dont run any phy detection logic for...
2018-02-21  Nitin Jainarm64: zynqmp: Add support to load an app at EL1
2018-02-21  Michal SimekRevert "pytest: Mark memtest_ddr as xfail"
2018-02-21  Vipul Kumararm64: zynqmp: Changed scratch address used by the...
2018-02-14  Siva Durga... env: Relocate env drivers if manual reloc is required
2018-02-14  Michal Simekarm64: zynqmp: Move bootargs setting to Kconfig
2018-02-12  Michal Simekarm64: zynqmp: Enable newer pmufw versions
2018-02-09  Michal Simekarm64: zynqmp: Cleanup zc12XX defconfigs
2018-02-09  Michal SimekKconfig: Select networking commands only when NET is...
2018-02-09  Michal SimekKconfig: net: phylib: Phylib should depends on NET
2018-02-09  Michal Simekomap4: sdp4430: Enable CONFIG_NET for this platform
2018-02-08  Vipul Kumarsandbox: Fixed spi-flash sandbox compilation warnings
2018-02-08  Vipul Kumararm: cse-nand: Added pre-relocation property in cse...
2018-02-07  Siva Durga... zynqmp: aes: Print error code incase of decryption...
2018-02-07  Philipp Tomsichspl: fit: move fdt_record_loadable out of ARCH_FIXUP_FD...
2018-02-07  Michal SimekRevert "asm-generic: atomic: Remove unused functions"
2018-02-07  Michal Simekarm64: zynqmp: Disable ethernet commands for zc12xx...
2018-01-31  Michal Simekpytest: Mark memtest_ddr as xfail
2018-01-31  Siva Durga... arm: zynq: Enable debug uart on Zedboard
2018-01-31  Ulf Magnussonarm64: zynqmp: Fix misspelled choice default
2018-01-31  Siva Durga... configs: zynqmp: Enable Fixed link support
2018-01-31  Michal Simektest: py: Move ram base address detection out of loop
2018-01-31  Michal Simektest: py: Create qspi write continue test
2018-01-31  Michal Simektest: py: Erase qspi before writing data
2018-01-31  Vipul Kumarmicroblaze: Moved ethernet PHY configs of Microblaze...
2018-01-31  Vipul Kumararm64: zynqmp: Moved ethernet PHY configs of ZynqMP...
2018-01-31  Vipul Kumararm: zynq: Moved ethernet PHY configs of Zynq boards...
2018-01-31  Vipul Kumaraxi: ethernet: Added support for 64 bit addressing...
2018-01-31  Siva Durga... spi: zynq_qspi: Typecast rxbuf properly
2018-01-31  Siva Durga... spi: Add support for spi part sst26wf016b
2018-01-31  Michal Simektest: py: DDR address for writing data back is also...
2018-01-31  Michal Simekpy: test: Fix qspi crc handling
2018-01-31  Siva Durga... spi: zynq_qspi: Read only one byte at a time from txbuf
2018-01-31  Siva Durga... net: zynq_gem: Use max-speed property from dt
2018-01-31  Vipul Kumarmtd: spi-nor: Added support to check addressing mode...
2018-01-31  Michal Simektest: py: Add generic sata test
2018-01-31  Michal Simektest: py: Use proper boardspec for zcu102 i2c device...
2018-01-31  Michal Simekarm64: zynqmp: Enable gem on zc1751-dc5
2018-01-31  Michal Simekarm: zynq: Enable mtest command at least on one platform
2018-01-31  Michal Simekpy: test: Add simple sata test for zcu102
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zcu100-revC
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zcu106-revA
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zcu104-revA
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1254-revA
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1232-revA
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1751-dc1
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1751-dc2
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1751-dc3
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1751-dc4
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zc1751-dc5
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for ep108
2018-01-31  Michal Simekarm64: zynqmp: Clean psu_init* files for zcu102-revA
2018-01-31  Michal Simek arm64: zynqmp: Clean psu_init* files for zcu102-rev1.0
2018-01-31  Michal Simekarm64: zynqmp: Prepare psu_init rework
2018-01-31  Michal Simekarm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INI...
2018-01-31  Michal Simekarm64: zynqmp: Remove zcu100-revA/revB board
2018-01-31  Michal Simekarm: zynq: Enable distro defaults setting
2018-01-31  Michal Simekdoc: zynq: Describe status of zc770-xm011
2018-01-31  Ezequiel Garciadoc: Update the zynq u-boot status
2018-01-31  Ezequiel Garciaarm: zynq: Enable SPL_CLK only if SPL is enabled
2018-01-31  Siva Durga... arm64: zynqmp: mini_qspi: Enable config option to remov...
2018-01-31  Siva Durga... arm64: zynqmp: Provide a config to not map DDR region...
2018-01-31  Michal Simekarm: zynq: Fix zc770-xm013 spl configuration
2018-01-31  Michal Simekarm: zynq: Fix zc770-xm012 spl configuration
2018-01-31  Michal Simekarm: zynq: Fix zc770-xm010 spl configuration
2018-01-31  Michal Simekarm: zynq: Fix zc770-xm011 spl configuration
2018-01-31  Michal Simekarm: zynq: Fix zc770-xm011-x16 spl configuration
2018-01-31  Michal Simekarm: zynq: Add support for zc770-xm011-x16 configuration
2018-01-31  Michal Simekarm: zynq: Fix types in ps7_spl_init
2018-01-31  Siva Durga... net: phy: xilinx_phy: Read phytype using property xlnx...
2018-01-31  Michal Simekarm64: zynqmp: Enable i2c via Kconfig
2018-01-31  Vipul Kumarmtd: spi-nor: Added support for MACRONIX 1Gb 1.8v flash...
2018-01-31  Michal Simekarm64: zynqmp: Propagate error value from psu_init()
2018-01-31  Michal Simekarm: zynq: Fix pmu register description coding style
2018-01-31  Michal Simekarm: zynq: Enable eth and mmc if subsystem is enabled
2018-01-31  Michal Simekarm64: zynqmp: Remove whitespaces in psu_init() comment
2018-01-31  Michal Simekarm64: zynqmp: Remove unused empty functions
2018-01-31  Siva Durga... xilinx: zynqmp: Use strlen only if env_get doesn't...
2018-01-31  Michal Simekarm: zynq: Remove ZC770_ config option
2018-01-31  Michal Simektest: mmc: Do not run mmc/sd test if sd/mmc is not...
2018-01-31  Michal Simekarm: zynq: Disable networking for zc770 xm011
2018-01-31  Vipul Kumarmtd: spi-nor: Added support for SPANSION 1Gb 1.8v flash...
2018-01-31  Vipul Kumarmtd: spi-nor: Added flags for ISSI 256Mb 1.8v and 3...
2018-01-31  Michal SimekRevert "spl: spl_spi: Fix warnings"
2018-01-31  Michal Simekarm64: zynqmp: Add support for zcu111 revA
2018-01-31  Michal Simekarm64: zynqmp: Add support for zcu104 revC
2018-01-31  Michal Simekarm64: zynqmp: Remove zynq_slcr_gem_clk_setup()
2018-01-31  Michal Simekarm64: zynqmp: Setup bootcommand via defconfig
2018-01-31  Michal Simekarm64: zynqmp: Enable SPL spi support for zcu102 revB...
2018-01-31  Siva Durga... microblaze: Dont enable UBI support by default for...
2018-01-31  Siva Durga... spi: zynq_qspi: Correct baud rate divisor calculation
2018-01-31  Michal SimekMerge tag 'v2018.01' into master
2018-01-09  Tom RiniPrepare v2018.01 v2018.01
next