]> git.ipfire.org Git - thirdparty/u-boot.git/shortlog
thirdparty/u-boot.git
2015-03-13  Fabio Estevamwarp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
2015-03-13  Fabio Estevammx6_common: Do not select esdhc DDR mode for all boards
2015-03-13  Fabio Estevammx53ard: Use the standard U-boot prompt
2015-03-13  Stefan Roesecommon/board_f.c: Enable IMX watchdog in init_func_watc...
2015-03-13  Dirk Behmemx6: soc: Switch to cold reset
2015-03-13  Peng Fanimx:mx6 remove duplicated includes
2015-03-13  maxin.john... mx6sabre_common.h: remove deprecated mmc open/close
2015-03-13  Fabio Estevamwarp: Add a README file
2015-03-13  Fabio Estevamwarp: Add Device Firmware Upgrade support
2015-03-13  Fabio Estevamnovena: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevamwarp: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevamnitrogen6x: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevamhummingboard: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevamwandboard: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammxs: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx25pdk: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx31pdk: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx35pdk: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx51evk: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx53loco: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx6qarm2: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx6slevk: Use the default CONFIG_SYS_PBSIZE
2015-03-13  Fabio Estevammx6sxsabresd: Use the default CONFIG_SYS_PBSIZE
2015-03-05  Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot
2015-03-05  Stefano Babicmx5: fix get_reset_cause
2015-03-04  Simon Glassti: armv7: Move SPL SDRAM init to the right place,...
2015-03-04  Simon GlassMake export interface support CONFIG_SYS_MALLOC_SIMPLE
2015-03-04  Simon Glassarm: spl: Allow board_init_r() to run with a larger...
2015-03-04  Simon Glassdm: tegra: Enable driver model in SPL and adjust the...
2015-03-04  Simon Glassarm: spl: Avoid setting up a duplicate global data...
2015-03-04  Simon Glassarm: Reduce the scope of lowlevel_init()
2015-03-04  Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-samsung
2015-03-04  Przemyslaw... Odroid U3: use common code for dram reservation
2015-03-04  Przemyslaw... Odroid-XU3: enable the last dram bank and reserve 22MiB
2015-03-04  Przemyslaw... board: samsung: reserve memory for the secure firmware
2015-03-04  Łukasz Majewskisamsung: board: fix: Define loop iterator as an unsigne...
2015-03-03  Tom RiniPrepare v2015.04-rc3 v2015.04-rc3
2015-03-02  Sinan Akmanmpc837xerdb: "fix Calling __hwconfig without a buffer...
2015-03-02  Tom RiniMerge branch 'xnext/zynqmp' of git://www.denx.de/git...
2015-03-02  Michal Simekarm64: Add Xilinx ZynqMP support
2015-03-02  Andreas Bießmannatngwmkii: convert to generic board
2015-03-02  Masahiro Yamadakconfig: remove unneeded U-Boot extension code
2015-03-02  Axel Linserial: ns16550: Fix build error due to a typo
2015-03-02  Tom RiniMAINTAINERS, git-mailrc: Update my email address
2015-03-02  Tom Riniarmv7.h: Add <asm/io.h>
2015-03-02  Tom RiniMerge git://git.denx.de/u-boot-usb
2015-03-02  Tom RiniMerge git://git.denx.de/u-boot-pxa
2015-03-02  Fabio Estevamwarp: Select BOUNCE_BUFFER and CMD_EXT options
2015-03-02  Fabio Estevamwarp: Add USB Mass Storage support
2015-03-02  Fabio Estevammx6slevk: Provide a proper pad configuration for OTG1_I...
2015-03-02  Lukasz MajewskiMAINTAINERS: Add F: drivers/usb/gadget to DFU custodian...
2015-03-02  Marcel Ziswilerpxa: colibri_pxa270: integrate latest validated registe...
2015-03-02  Marcel Ziswilerpxa: colibri_pxa270: remove CONFIG_ENV_ADDR_REDUND
2015-03-02  Marcel Ziswilerpxa: colibri_pxa270: fix wrong comment about voipac...
2015-03-02  Marcel Ziswilerpxa: colibri_pax270: fix CONFIG_BOOTCOMMAND
2015-03-02  Marcel Ziswilerpxa: colibri_pxa270: avoid overwriting factory configur...
2015-03-02  Marcel Ziswilerpxa: colibri_pxa270: disable loadb/s commands and long...
2015-03-02  Marcel Ziswilerpxa: colibri_pxa270: migrate to generic board
2015-03-02  Marcel Ziswilerpxa: balloon3/colibri_pxa270: fix environment optionall...
2015-03-02  Marcel Ziswilerpxa: balloon3: fix comment about sdram banks
2015-03-02  Marcel Ziswilerpxa: balloon3: remove nowhere used symbol CONFIG_SYS_ME...
2015-03-02  Marcel Ziswilerremove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02  Marcel Ziswilerpxa: fix wrong comment about vpac270 being the arch...
2015-03-02  Raul Cardenasimx6: Added DEK blob generator command
2015-03-02  Fabio Estevammx6sabre: Select CMD_EXT4 options
2015-03-02  Fabio Estevammx6sabre: Enable User Mass Storage
2015-03-02  Soeren Mochboard: tbs2910: Enable USB Mass Storage support
2015-03-02  Fabio Estevammx35: Fix boot hang by avoiding vector relocation
2015-03-02  Fabio Estevammx31: Fix boot hang by avoiding vector relocation
2015-03-02  Fabio Estevammx25pdk: Turn on the LCD supply
2015-03-02  Fabio Estevammc34704: Add the definition of ONOFFA bit
2015-03-02  Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot
2015-03-02  Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-samsung
2015-03-02  Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-uniphier
2015-03-02  Tom RiniMerge branch 'rmobile' of git://git.denx.de/u-boot-sh
2015-03-02  Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2015-02-28  Masahiro YamadaARM: UniPhier: remove SSC_WAY_SIZE and SSC_NUM_ENTRIES...
2015-02-28  Masahiro YamadaARM: UniPhier: remove stop_mpll() from PH1-Pro4 PLL...
2015-02-28  Masahiro YamadaARM: UniPhier: consolidate MEMCONF setting code
2015-02-28  Masahiro YamadaARM: UniPhier: switch to 1CS support card
2015-02-28  Masahiro YamadaARM: UniPhier: support 1CS support card for all the...
2015-02-28  Masahiro YamadaARM: UniPhier: switch to xHCI for PH1-Pro4
2015-02-28  Masahiro Yamadausb: UniPhier: add UniPhier on-chip xHCI host driver...
2015-02-28  Masahiro YamadaARM: UniPhier: add xHCI device nodes to PH1-Pro4 device...
2015-02-28  Masahiro YamadaARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4
2015-02-28  Masahiro YamadaARM: UniPhier: add I/O pin settings for xHCI on PH1...
2015-02-28  Masahiro YamadaARM: UniPhier: replace "usb-ehci" with "generic-ehci"
2015-02-28  Masahiro YamadaARM: UniPhier: move uniphier_ehci_reset() function
2015-02-28  Masahiro YamadaARM: UniPhier: remove EHCI platform devices
2015-02-28  Masahiro YamadaARM: UniPhier: enable STDMAC for EHCI
2015-02-28  Masahiro YamadaARM: UniPhier: reset NAND core in SPL for non-NAND...
2015-02-28  Masahiro YamadaARM: UniPhier: split clkrst_init() into two functions
2015-02-28  Masahiro YamadaARM: UniPhier: rename SC_CLKCTRL_CLK_* to SC_SCLKCTRL_CEN_*
2015-02-28  Masahiro YamadaARM: UniPhier: fix SBC init code
2015-02-28  Masahiro YamadaARM: UniPhier: fix comments in PH1-Pro4 SBC code
2015-02-28  Masahiro Yamadaserial: UniPhier: move LCR register setting to probe...
2015-02-28  Masahiro Yamadaserial: UniPhier: use 32 bit register access
2015-02-28  Masahiro YamadaARM: UniPhier: update defconfigs using savedefconfig
2015-02-28  Masahiro YamadaARM: UniPhier: include <mach/*.h> instead of <asm/arch...
2015-02-28  Masahiro YamadaARM: UniPhier: move SoC headers to mach-uniphier/includ...
next