[ipfire-2.x.git] / lfs / flash-images

###############################################################################
#                                                                             #
# IPFire.org - A linux based firewall                                         #
# Copyright (C) 2007-2017  IPFire Team  <info@ipfire.org>                     #
#                                                                             #
# This program is free software: you can redistribute it and/or modify        #
# it under the terms of the GNU General Public License as published by        #
# the Free Software Foundation, either version 3 of the License, or           #
# (at your option) any later version.                                         #
#                                                                             #
# This program is distributed in the hope that it will be useful,             #
# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
# GNU General Public License for more details.                                #
#                                                                             #
# You should have received a copy of the GNU General Public License           #
# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
#                                                                             #
###############################################################################

###############################################################################
# Definitions
###############################################################################

include Config

VER = ipfire

THISAPP    = flash-image
TARGET     = $(DIR_INFO)/$(THISAPP)

DEVICE     = $(shell losetup -f)
PART_BOOT  = /dev/mapper/$(patsubst /dev/%,%,$(DEVICE))p1
PART_ROOT  = /dev/mapper/$(patsubst /dev/%,%,$(DEVICE))p3

ifeq "$(SCON)" "1"
	IMAGE_FILE = /install/images/$(SNAME)-$(VERSION).1gb-ext4-scon.$(BUILD_ARCH)-full-core$(CORE).img.gz
else
	IMAGE_FILE = /install/images/$(SNAME)-$(VERSION).1gb-ext4.$(BUILD_ARCH)-full-core$(CORE).img.gz
endif

FSTAB_FMT = UUID=%s %-8s %-4s %-10s %d %d\n

###############################################################################
# Top-level Rules
###############################################################################

install : $(TARGET)

check :

download :

md5 :

###############################################################################
# Installation Details
###############################################################################
MNThdd   := /install/harddisk
IMG      := /install/images/image.img

# All sizes in blocks
ifeq "$(BUILD_PLATFORM)" "arm"
 BOOTLOADER =
 S_OFFSET = 8192

 # FAT32
 PART_TYPE = c
else
 BOOTLOADER = grub
 S_OFFSET = 8192

 # Logical
 PART_TYPE = L
endif

# /boot:  64MB - OFFSET
# /    : 850MB
S_BOOT := $(shell echo $$(( 131072 - $(S_OFFSET) )))
S_ROOT := 1740800

PADDING = 100 # MB

$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
	# Stop if $(MNThdd) is still mounted
	mountpoint $(MNThdd) && exit 1 || exit 0

	rm -rf $(IMG) $(MNThdd) && mkdir -p $(MNThdd)

	# Allocate image on disk
	dd if=/dev/zero of=$(IMG) bs=512 count=$$(( $(S_OFFSET) + $(S_BOOT) + $(S_ROOT) ))
	losetup $(DEVICE) $(IMG)

	# Write Partition table
	echo -e "$(S_OFFSET),$(S_BOOT),$(PART_TYPE),*\n,0,0\n$$(( $(S_BOOT) + $(S_OFFSET) )),$(S_ROOT),L\n" \
		| sfdisk -uS $(DEVICE)
	-echo -e "d\n2\nw\n\q\n" | fdisk $(DEVICE)

	kpartx -v -a $(DEVICE)

	# Format them
ifeq "$(PART_TYPE)" "c"
	mkfs.vfat $(PART_BOOT)
else
	mkfs.ext2 -F $(PART_BOOT)
endif
	mkfs.ext4 -O ^has_journal,extent -F $(PART_ROOT)

	# Most systems that use Flashimages has no RTC at boot
	# so the interval check should disables
	tune2fs -i0 $(PART_ROOT)

	# Mount root partition
	mount $(PART_ROOT) $(MNThdd)

	# Mount boot partition
	mkdir -pv $(MNThdd)/boot
	mount $(PART_BOOT) $(MNThdd)/boot

	# Install Pandaboard MLO and uboot first
ifeq "$(BUILD_PLATFORM)" "arm"
	cp -v /boot/MLO $(MNThdd)/boot/
	cp -v /boot/u-boot.img $(MNThdd)/boot/
	cp -v /boot/zImage-ipfire-multi $(MNThdd)/boot/
	cp -v /boot/uInit-ipfire-multi $(MNThdd)/boot/
	cp -v /boot/uImage-ipfire-kirkwood $(MNThdd)/boot/
	cp -v /boot/uInit-ipfire-kirkwood $(MNThdd)/boot/
	cp -v /boot/uEnv.txt $(MNThdd)/boot/
	# work around a u-boot bug not find the folders sometimes
	mkdir -pv $(MNThdd)/boot/dtb-$(KVER)-ipfire-multi
	mkdir -pv $(MNThdd)/boot/dtb-$(KVER)-ipfire-kirkwood
	
	sync
	umount $(MNThdd)/boot
	mount $(PART_BOOT) $(MNThdd)/boot
endif

	# Install IPFire
ifneq "$(BUILD_PLATFORM)" "arm"
	tar -x --xz -C $(MNThdd)/ -f /install/cdrom/distro.img
else
	tar -x -C $(MNThdd)/ -f /install/cdrom/distro.img
endif
	echo "LANGUAGE=en" >> $(MNThdd)/var/ipfire/main/settings
	echo "HOSTNAME=$(SNAME)" >> $(MNThdd)/var/ipfire/main/settings
	echo "THEME=ipfire" >> $(MNThdd)/var/ipfire/main/settings

ifeq "$(SCON)" "1"
	# Enable serial console
	sed -i -e "s|1:2345:respawn:|#1:2345:respawn:|g" $(MNThdd)/etc/inittab
	sed -i -e "s|2:2345:respawn:|#2:2345:respawn:|g" $(MNThdd)/etc/inittab
	sed -i -e "s|3:2345:respawn:|#3:2345:respawn:|g" $(MNThdd)/etc/inittab
	sed -i -e "s|4:2345:respawn:|#4:2345:respawn:|g" $(MNThdd)/etc/inittab
	sed -i -e "s|5:2345:respawn:|#5:2345:respawn:|g" $(MNThdd)/etc/inittab
	sed -i -e "s|6:2345:respawn:|#6:2345:respawn:|g" $(MNThdd)/etc/inittab
	sed -i -e "s|#7:2345:respawn:|7:2345:respawn:|g" $(MNThdd)/etc/inittab

ifeq "$(BUILD_PLATFORM)" "arm"
	sed -i -e "s| console=tty1 | console=ttyAMA0,115200n8 |g" $(MNThdd)/boot/cmdline.txt
	sed -i -e "s| console=tty1 | console=ttyO2,115200n8 |g" $(MNThdd)/boot/uEnv.txt
endif
endif

	-touch $(MNThdd)/lib/modules/$(KVER)-ipfire/modules.dep
	mkdir $(MNThdd)/proc
	mount --bind /proc $(MNThdd)/proc
	mount --bind /dev  $(MNThdd)/dev
	mount --bind /sys  $(MNThdd)/sys

	chroot $(MNThdd) /usr/bin/perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"

	# Create /etc/fstab
	printf "$(FSTAB_FMT)" "$$(blkid -o value -s UUID $(PART_BOOT))" "/boot" \
		"auto" "defaults" 1 2 >  $(MNThdd)/etc/fstab
	printf "$(FSTAB_FMT)" "$$(blkid -o value -s UUID $(PART_ROOT))" "/" \
		"auto" "defaults" 1 1 >> $(MNThdd)/etc/fstab

ifeq "$(BOOTLOADER)" "grub"
ifeq "$(SCON)" "1"
	# Enable serial console on GRUB
	echo "GRUB_TERMINAL=\"serial\"" >> $(MNThdd)/etc/default/grub
	echo "GRUB_SERIAL_COMMAND=\"serial --unit=0 --speed=115200\"" >> $(MNThdd)/etc/default/grub

	sed -i -e "s|panic=10|& console=ttyS0,115200n8|g" $(MNThdd)/etc/default/grub
endif

	# Create configuration
	mkdir -pv $(MNThdd)/boot/grub
	chroot $(MNThdd) grub-mkconfig -o /boot/grub/grub.cfg

	# Insert the UUID because grub-mkconfig often fails to
	# detect that correctly
	sed -i $(MNThdd)/boot/grub/grub.cfg \
		-e "s/root=[A-Za-z0-9\/=-]*/root=UUID=$$(blkid -o value -s UUID $(PART_ROOT))/g"

	# Install GRUB
	grub-install --force --recheck --no-floppy --target=i386-pc \
		--root-directory=$(MNThdd) $(DEVICE)
endif

	# Set ramdisk mode to automatic
	echo RAMDISK_MODE=2 > $(MNThdd)/etc/sysconfig/ramdisk

	# Automatically resize the root partition to its maximum size at first boot
	touch $(MNThdd)/.partresize

	# Unmount
	umount $(MNThdd)/proc
	umount $(MNThdd)/sys
	umount $(MNThdd)/dev
	umount $(MNThdd)/boot
	umount $(MNThdd)

	# zerofree the ext2 images to get better compression
ifneq "$(PART_TYPE)" "c"
	zerofree $(PART_BOOT)
	-fsck.ext2 -f -y $(PART_BOOT)
	fsck.ext2 -f -y $(PART_BOOT)
endif
	zerofree $(PART_ROOT)
	-fsck.ext4 -f -y $(PART_ROOT)
	fsck.ext4 -f -y $(PART_ROOT)

	sleep 10     #Ubuntu compiling: allow time to automount/dismount
	kpartx -d -v $(DEVICE)
	losetup -d $(DEVICE)

	# Add padding at the end of the image (to fix alignment issues if the image is
	# not copied to a block device)
	dd if=/dev/zero bs=1M count=$(PADDING) >> $(IMG)

ifeq "$(BUILD_PLATFORM)" "arm"
	# Install u-boot for LeMaker Banana Pi into image 8KB
	dd if=/usr/share/u-boot/banana_pi/u-boot-sunxi-with-spl.bin of=$(IMG) bs=1K seek=8 conv=notrunc
endif

	# Compress Image
	pigz -f9 < $(IMG) > $(IMAGE_FILE)
	rm -rf $(IMG) $(MNThdd)
Commit	Line	Data
52ca8220 AF	1	###############################################################################
	2	# #
	3	# IPFire.org - A linux based firewall #
f3e86ec5	4	# Copyright (C) 2007-2017 IPFire Team <info@ipfire.org> #
52ca8220 AF	5	# #
	6	# This program is free software: you can redistribute it and/or modify #
	7	# it under the terms of the GNU General Public License as published by #
	8	# the Free Software Foundation, either version 3 of the License, or #
	9	# (at your option) any later version. #
	10	# #
	11	# This program is distributed in the hope that it will be useful, #
	12	# but WITHOUT ANY WARRANTY; without even the implied warranty of #
	13	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
	14	# GNU General Public License for more details. #
	15	# #
	16	# You should have received a copy of the GNU General Public License #
	17	# along with this program. If not, see <http://www.gnu.org/licenses/>. #
	18	# #
	19	###############################################################################
	20
	21	###############################################################################
	22	# Definitions
	23	###############################################################################
	24
	25	include Config
	26
	27	VER = ipfire
	28
	29	THISAPP = flash-image
	30	TARGET = $(DIR_INFO)/$(THISAPP)
	31
c42cbc86 MT	32	DEVICE = $(shell losetup -f)
c42cbc86 MT	33	PART_BOOT = /dev/mapper/$(patsubst /dev/%,%,$(DEVICE))p1
05656571	34	PART_ROOT = /dev/mapper/$(patsubst /dev/%,%,$(DEVICE))p3
c42cbc86 MT	35
c42cbc86 MT	36	ifeq "$(SCON)" "1"
dc7d6b20	37	IMAGE_FILE = /install/images/$(SNAME)-$(VERSION).1gb-ext4-scon.$(BUILD_ARCH)-full-core$(CORE).img.gz
c42cbc86	38	else
dc7d6b20	39	IMAGE_FILE = /install/images/$(SNAME)-$(VERSION).1gb-ext4.$(BUILD_ARCH)-full-core$(CORE).img.gz
c42cbc86 MT	40	endif
	41
	42	FSTAB_FMT = UUID=%s %-8s %-4s %-10s %d %d\n
	43
52ca8220 AF	44	###############################################################################
	45	# Top-level Rules
	46	###############################################################################
	47
	48	install : $(TARGET)
	49
	50	check :
	51
	52	download :
	53
	54	md5 :
	55
	56	###############################################################################
	57	# Installation Details
	58	###############################################################################
52ca8220	59	MNThdd := /install/harddisk
c42cbc86	60	IMG := /install/images/image.img
8a5ef45f SS	61
8a5ef45f SS	62	# All sizes in blocks
dc7d6b20	63	ifeq "$(BUILD_PLATFORM)" "arm"
c42cbc86	64	BOOTLOADER =
8a5ef45f SS	65	S_OFFSET = 8192
	66
	67	# FAT32
	68	PART_TYPE = c
	69	else
c42cbc86 MT	70	BOOTLOADER = grub
c42cbc86 MT	71	S_OFFSET = 8192
8a5ef45f SS	72
	73	# Logical
	74	PART_TYPE = L
	75	endif
	76
	77	# /boot: 64MB - OFFSET
d5f3cc7f	78	# / : 850MB
8a5ef45f	79	S_BOOT := $(shell echo $$(( 131072 - $(S_OFFSET) )))
d5f3cc7f	80	S_ROOT := 1740800
52ca8220	81
7051d2af MT	82	PADDING = 100 # MB
7051d2af MT	83
52ca8220	84	$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
c42cbc86 MT	85	# Stop if $(MNThdd) is still mounted
	86	mountpoint $(MNThdd) && exit 1 \|\| exit 0
	87
	88	rm -rf $(IMG) $(MNThdd) && mkdir -p $(MNThdd)
	89
	90	# Allocate image on disk
	91	dd if=/dev/zero of=$(IMG) bs=512 count=$$(( $(S_OFFSET) + $(S_BOOT) + $(S_ROOT) ))
	92	losetup $(DEVICE) $(IMG)
52ca8220	93
c42cbc86	94	# Write Partition table
05656571	95	echo -e "$(S_OFFSET),$(S_BOOT),$(PART_TYPE),*\n,0,0\n$$(( $(S_BOOT) + $(S_OFFSET) )),$(S_ROOT),L\n" \
f3e86ec5	96	\| sfdisk -uS $(DEVICE)
025e1fe1	97	-echo -e "d\n2\nw\n\q\n" \| fdisk $(DEVICE)
52ca8220	98
c42cbc86	99	kpartx -v -a $(DEVICE)
52ca8220 AF	100
52ca8220 AF	101	# Format them
8a5ef45f	102	ifeq "$(PART_TYPE)" "c"
c42cbc86	103	mkfs.vfat $(PART_BOOT)
185f92e1	104	else
c42cbc86	105	mkfs.ext2 -F $(PART_BOOT)
185f92e1	106	endif
c42cbc86	107	mkfs.ext4 -O ^has_journal,extent -F $(PART_ROOT)
52ca8220	108
e9b5c815 AF	109	# Most systems that use Flashimages has no RTC at boot
e9b5c815 AF	110	# so the interval check should disables
c42cbc86 MT	111	tune2fs -i0 $(PART_ROOT)
	112
	113	# Mount root partition
	114	mount $(PART_ROOT) $(MNThdd)
e9b5c815	115
c42cbc86 MT	116	# Mount boot partition
	117	mkdir -pv $(MNThdd)/boot
	118	mount $(PART_BOOT) $(MNThdd)/boot
52ca8220	119
56e211f6	120	# Install Pandaboard MLO and uboot first
dc7d6b20	121	ifeq "$(BUILD_PLATFORM)" "arm"
9831c245	122	cp -v /boot/MLO $(MNThdd)/boot/
7284262a	123	cp -v /boot/u-boot.img $(MNThdd)/boot/
906d293b	124	cp -v /boot/zImage-ipfire-multi $(MNThdd)/boot/
4f472f86 AF	125	cp -v /boot/uInit-ipfire-multi $(MNThdd)/boot/
	126	cp -v /boot/uImage-ipfire-kirkwood $(MNThdd)/boot/
	127	cp -v /boot/uInit-ipfire-kirkwood $(MNThdd)/boot/
	128	cp -v /boot/uEnv.txt $(MNThdd)/boot/
15094e71 AF	129	# work around a u-boot bug not find the folders sometimes
	130	mkdir -pv $(MNThdd)/boot/dtb-$(KVER)-ipfire-multi
	131	mkdir -pv $(MNThdd)/boot/dtb-$(KVER)-ipfire-kirkwood
4f472f86	132
9831c245 AF	133	sync
9831c245 AF	134	umount $(MNThdd)/boot
c42cbc86	135	mount $(PART_BOOT) $(MNThdd)/boot
9831c245 AF	136	endif
9831c245 AF	137
52ca8220	138	# Install IPFire
dc7d6b20	139	ifneq "$(BUILD_PLATFORM)" "arm"
c061d66f	140	tar -x --xz -C $(MNThdd)/ -f /install/cdrom/distro.img
9b35b114 AF	141	else
	142	tar -x -C $(MNThdd)/ -f /install/cdrom/distro.img
	143	endif
6fafd272 AF	144	echo "LANGUAGE=en" >> $(MNThdd)/var/ipfire/main/settings
	145	echo "HOSTNAME=$(SNAME)" >> $(MNThdd)/var/ipfire/main/settings
	146	echo "THEME=ipfire" >> $(MNThdd)/var/ipfire/main/settings
c42cbc86 MT	147
	148	ifeq "$(SCON)" "1"
	149	# Enable serial console
	150	sed -i -e "s\|1:2345:respawn:\|#1:2345:respawn:\|g" $(MNThdd)/etc/inittab
	151	sed -i -e "s\|2:2345:respawn:\|#2:2345:respawn:\|g" $(MNThdd)/etc/inittab
	152	sed -i -e "s\|3:2345:respawn:\|#3:2345:respawn:\|g" $(MNThdd)/etc/inittab
	153	sed -i -e "s\|4:2345:respawn:\|#4:2345:respawn:\|g" $(MNThdd)/etc/inittab
	154	sed -i -e "s\|5:2345:respawn:\|#5:2345:respawn:\|g" $(MNThdd)/etc/inittab
	155	sed -i -e "s\|6:2345:respawn:\|#6:2345:respawn:\|g" $(MNThdd)/etc/inittab
	156	sed -i -e "s\|#7:2345:respawn:\|7:2345:respawn:\|g" $(MNThdd)/etc/inittab
	157
dc7d6b20	158	ifeq "$(BUILD_PLATFORM)" "arm"
c42cbc86	159	sed -i -e "s\| console=tty1 \| console=ttyAMA0,115200n8 \|g" $(MNThdd)/boot/cmdline.txt
56e211f6	160	sed -i -e "s\| console=tty1 \| console=ttyO2,115200n8 \|g" $(MNThdd)/boot/uEnv.txt
c42cbc86 MT	161	endif
	162	endif
	163
185f92e1	164	-touch $(MNThdd)/lib/modules/$(KVER)-ipfire/modules.dep
52ca8220 AF	165	mkdir $(MNThdd)/proc
	166	mount --bind /proc $(MNThdd)/proc
	167	mount --bind /dev $(MNThdd)/dev
	168	mount --bind /sys $(MNThdd)/sys
c42cbc86	169
52ca8220	170	chroot $(MNThdd) /usr/bin/perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
c42cbc86 MT	171
	172	# Create /etc/fstab
	173	printf "$(FSTAB_FMT)" "$$(blkid -o value -s UUID $(PART_BOOT))" "/boot" \
	174	"auto" "defaults" 1 2 > $(MNThdd)/etc/fstab
	175	printf "$(FSTAB_FMT)" "$$(blkid -o value -s UUID $(PART_ROOT))" "/" \
	176	"auto" "defaults" 1 1 >> $(MNThdd)/etc/fstab
edc2be70	177
c42cbc86 MT	178	ifeq "$(BOOTLOADER)" "grub"
	179	ifeq "$(SCON)" "1"
	180	# Enable serial console on GRUB
7f6e0425	181	echo "GRUB_TERMINAL=\"serial\"" >> $(MNThdd)/etc/default/grub
c42cbc86	182	echo "GRUB_SERIAL_COMMAND=\"serial --unit=0 --speed=115200\"" >> $(MNThdd)/etc/default/grub
52ca8220	183
c42cbc86	184	sed -i -e "s\|panic=10\|& console=ttyS0,115200n8\|g" $(MNThdd)/etc/default/grub
185f92e1	185	endif
dfc4bc56	186
c42cbc86 MT	187	# Create configuration
	188	mkdir -pv $(MNThdd)/boot/grub
	189	chroot $(MNThdd) grub-mkconfig -o /boot/grub/grub.cfg
9831c245	190
38956241 AF	191	# Insert the UUID because grub-mkconfig often fails to
38956241 AF	192	# detect that correctly
c42cbc86	193	sed -i $(MNThdd)/boot/grub/grub.cfg \
efd02229	194	-e "s/root=[A-Za-z0-9\/=-]*/root=UUID=$$(blkid -o value -s UUID $(PART_ROOT))/g"
52ca8220	195
c42cbc86	196	# Install GRUB
5021ee33	197	grub-install --force --recheck --no-floppy --target=i386-pc \
c42cbc86	198	--root-directory=$(MNThdd) $(DEVICE)
185f92e1	199	endif
52ca8220	200
920f1950 AF	201	# Set ramdisk mode to automatic
	202	echo RAMDISK_MODE=2 > $(MNThdd)/etc/sysconfig/ramdisk
	203
a2454679 MT	204	# Automatically resize the root partition to its maximum size at first boot
	205	touch $(MNThdd)/.partresize
	206
c42cbc86 MT	207	# Unmount
	208	umount $(MNThdd)/proc
	209	umount $(MNThdd)/sys
	210	umount $(MNThdd)/dev
52ca8220 AF	211	umount $(MNThdd)/boot
	212	umount $(MNThdd)
	213
c42cbc86	214	# zerofree the ext2 images to get better compression
8a5ef45f	215	ifneq "$(PART_TYPE)" "c"
c42cbc86 MT	216	zerofree $(PART_BOOT)
	217	-fsck.ext2 -f -y $(PART_BOOT)
	218	fsck.ext2 -f -y $(PART_BOOT)
185f92e1	219	endif
c42cbc86 MT	220	zerofree $(PART_ROOT)
	221	-fsck.ext4 -f -y $(PART_ROOT)
	222	fsck.ext4 -f -y $(PART_ROOT)
dfc4bc56	223
e0b9a600	224	sleep 10 #Ubuntu compiling: allow time to automount/dismount
c42cbc86 MT	225	kpartx -d -v $(DEVICE)
c42cbc86 MT	226	losetup -d $(DEVICE)
52ca8220	227
7051d2af MT	228	# Add padding at the end of the image (to fix alignment issues if the image is
	229	# not copied to a block device)
	230	dd if=/dev/zero bs=1M count=$(PADDING) >> $(IMG)
	231
dc7d6b20	232	ifeq "$(BUILD_PLATFORM)" "arm"
56e211f6 AF	233	# Install u-boot for LeMaker Banana Pi into image 8KB
	234	dd if=/usr/share/u-boot/banana_pi/u-boot-sunxi-with-spl.bin of=$(IMG) bs=1K seek=8 conv=notrunc
	235	endif
	236
52ca8220	237	# Compress Image
c42cbc86 MT	238	pigz -f9 < $(IMG) > $(IMAGE_FILE)
c42cbc86 MT	239	rm -rf $(IMG) $(MNThdd)