correct wrong headline at hardwaregraphs.cgi

[ipfire-2.x.git] / src / patches / backports-4.2.6-1-add_usbnet_modules.patch

diff -Naur backports-4.2.6-1.org/drivers/net/usb/asix_common.c backports-4.2.6-1/drivers/net/usb/asix_common.c
--- backports-4.2.6-1.org/drivers/net/usb/asix_common.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/asix_common.c	2016-06-28 14:35:17.965307221 +0200
@@ -0,0 +1,584 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "asix.h"
+
+int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		  u16 size, void *data)
+{
+	int ret;
+	ret = usbnet_read_cmd(dev, cmd,
+			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       value, index, data, size);
+
+	if (ret != size && ret >= 0)
+		return -EINVAL;
+	return ret;
+}
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data)
+{
+	return usbnet_write_cmd(dev, cmd,
+				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				value, index, data, size);
+}
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			  u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, cmd,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       value, index, data, size);
+}
+
+int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
+			   struct asix_rx_fixup_info *rx)
+{
+	int offset = 0;
+
+	while (offset + sizeof(u16) <= skb->len) {
+		u16 remaining = 0;
+		unsigned char *data;
+
+		if (!rx->size) {
+			if ((skb->len - offset == sizeof(u16)) ||
+			    rx->split_head) {
+				if(!rx->split_head) {
+					rx->header = get_unaligned_le16(
+							skb->data + offset);
+					rx->split_head = true;
+					offset += sizeof(u16);
+					break;
+				} else {
+					rx->header |= (get_unaligned_le16(
+							skb->data + offset)
+							<< 16);
+					rx->split_head = false;
+					offset += sizeof(u16);
+				}
+			} else {
+				rx->header = get_unaligned_le32(skb->data +
+								offset);
+				offset += sizeof(u32);
+			}
+
+			/* get the packet length */
+			rx->size = (u16) (rx->header & 0x7ff);
+			if (rx->size != ((~rx->header >> 16) & 0x7ff)) {
+				netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
+					   rx->header, offset);
+				rx->size = 0;
+				return 0;
+			}
+			rx->ax_skb = netdev_alloc_skb_ip_align(dev->net,
+							       rx->size);
+			if (!rx->ax_skb)
+				return 0;
+		}
+
+		if (rx->size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
+			netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+				   rx->size);
+			kfree_skb(rx->ax_skb);
+			rx->ax_skb = NULL;
+			rx->size = 0U;
+
+			return 0;
+		}
+
+		if (rx->size > skb->len - offset) {
+			remaining = rx->size - (skb->len - offset);
+			rx->size = skb->len - offset;
+		}
+
+		data = skb_put(rx->ax_skb, rx->size);
+		memcpy(data, skb->data + offset, rx->size);
+		if (!remaining)
+			usbnet_skb_return(dev, rx->ax_skb);
+
+		offset += (rx->size + 1) & 0xfffe;
+		rx->size = remaining;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
+			   skb->len, offset);
+		return 0;
+	}
+
+	return 1;
+}
+
+int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct asix_common_private *dp = dev->driver_priv;
+	struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
+
+	return asix_rx_fixup_internal(dev, skb, rx);
+}
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags)
+{
+	int padlen;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 packet_len;
+	u32 padbytes = 0xffff0000;
+
+	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
+
+	/* We need to push 4 bytes in front of frame (packet_len)
+	 * and maybe add 4 bytes after the end (if padlen is 4)
+	 *
+	 * Avoid skb_copy_expand() expensive call, using following rules :
+	 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
+	 *   is false (and if we have 4 bytes of headroom)
+	 * - We are allowed to put 4 bytes at tail if skb_cloned()
+	 *   is false (and if we have 4 bytes of tailroom)
+	 *
+	 * TCP packets for example are cloned, but skb_header_release()
+	 * was called in tcp stack, allowing us to use headroom for our needs.
+	 */
+	if (!skb_header_cloned(skb) &&
+	    !(padlen && skb_cloned(skb)) &&
+	    headroom + tailroom >= 4 + padlen) {
+		/* following should not happen, but better be safe */
+		if (headroom < 4 ||
+		    tailroom < padlen) {
+			skb->data = memmove(skb->head + 4, skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
+	skb_push(skb, 4);
+	cpu_to_le32s(&packet_len);
+	skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+	if (padlen) {
+		cpu_to_le32s(&padbytes);
+		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+		skb_put(skb, sizeof(padbytes));
+	}
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
+	return skb;
+}
+
+int asix_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+int asix_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+int asix_read_phy_addr(struct usbnet *dev, int internal)
+{
+	int offset = (internal ? 1 : 0);
+	u8 buf[2];
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+
+	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
+		goto out;
+	}
+	netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
+		   *((__le16 *)buf));
+	ret = buf[offset];
+
+out:
+	return ret;
+}
+
+int asix_get_phy_addr(struct usbnet *dev)
+{
+	/* return the address of the internal phy */
+	return asix_read_phy_addr(dev, 1);
+}
+
+
+int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
+
+	return ret;
+}
+
+u16 asix_read_rx_ctl(struct usbnet *dev)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
+		goto out;
+	}
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+u16 asix_read_medium_status(struct usbnet *dev)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+			   ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+
+}
+
+int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+			   value, ret);
+
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
+void asix_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 rx_ctl = AX_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= AX_RX_CTL_AM;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+
+	mutex_lock(&dev->phy_mutex);
+	asix_set_sw_mii(dev);
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+				(__u16)loc, 2, &res);
+	asix_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+	mutex_lock(&dev->phy_mutex);
+	asix_set_sw_mii(dev);
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+	asix_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & AX_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & AX_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= AX_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= AX_MONITOR_MAGIC;
+
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+			      opt, 0, 0, NULL) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+int asix_get_eeprom_len(struct net_device *net)
+{
+	return AX_EEPROM_LEN;
+}
+
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = AX_EEPROM_MAGIC;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+			      GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* ax8817x returns 2 bytes from eeprom on read */
+	for (i = first_word; i <= last_word; i++) {
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
+				  &(eeprom_buff[i - first_word])) < 0) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+	return 0;
+}
+
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+	int ret;
+
+	netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
+		   eeprom->len, eeprom->offset, eeprom->magic);
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != AX_EEPROM_MAGIC)
+		return -EINVAL;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+			      GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* align data to 16 bit boundaries, read the missing data from
+	   the EEPROM */
+	if (eeprom->offset & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
+				    &(eeprom_buff[0]));
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
+			goto free;
+		}
+	}
+
+	if ((eeprom->offset + eeprom->len) & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
+				    &(eeprom_buff[last_word - first_word]));
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
+			goto free;
+		}
+	}
+
+	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
+
+	/* write data to EEPROM */
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_err(net, "Failed to enable EEPROM write\n");
+		goto free;
+	}
+	msleep(20);
+
+	for (i = first_word; i <= last_word; i++) {
+		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
+			   i, eeprom_buff[i - first_word]);
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
+				     eeprom_buff[i - first_word], 0, NULL);
+		if (ret < 0) {
+			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
+				   i);
+			goto free;
+		}
+		msleep(20);
+	}
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_err(net, "Failed to disable EEPROM write\n");
+		goto free;
+	}
+
+	ret = 0;
+free:
+	kfree(eeprom_buff);
+	return ret;
+}
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	info->eedump_len = AX_EEPROM_LEN;
+}
+
+int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
diff -Naur backports-4.2.6-1.org/drivers/net/usb/asix_devices.c backports-4.2.6-1/drivers/net/usb/asix_devices.c
--- backports-4.2.6-1.org/drivers/net/usb/asix_devices.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/asix_devices.c	2016-06-28 14:35:17.965307221 +0200
@@ -0,0 +1,1107 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "asix.h"
+
+#define PHY_MODE_MARVELL	0x0000
+#define MII_MARVELL_LED_CTRL	0x0018
+#define MII_MARVELL_STATUS	0x001b
+#define MII_MARVELL_CTRL	0x0014
+
+#define MARVELL_LED_MANUAL	0x0019
+
+#define MARVELL_STATUS_HWCFG	0x0004
+
+#define MARVELL_CTRL_TXDELAY	0x0002
+#define MARVELL_CTRL_RXDELAY	0x0080
+
+#define	PHY_MODE_RTL8211CL	0x000C
+
+struct ax88172_int_data {
+	__le16 res1;
+	u8 link;
+	__le16 res2;
+	u8 status;
+	__le16 res3;
+} __packed;
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
+{
+	struct ax88172_int_data *event;
+	int link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	link = event->link & 0x01;
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
+{
+	if (is_valid_ether_addr(addr)) {
+		memcpy(dev->net->dev_addr, addr, ETH_ALEN);
+	} else {
+		netdev_info(dev->net, "invalid hw address, using random\n");
+		eth_hw_addr_random(dev->net);
+	}
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 asix_get_phyid(struct usbnet *dev)
+{
+	int phy_reg;
+	u32 phy_id;
+	int i;
+
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
+		return 0;
+
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+	if (phy_reg < 0)
+		return 0;
+
+	phy_id |= (phy_reg & 0xffff);
+
+	return phy_id;
+}
+
+static u32 asix_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+/* We need to override some ethtool_ops so we require our
+   own structure so we don't interfere with other usbnet
+   devices that may be connected at the same time. */
+static const struct ethtool_ops ax88172_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static void ax88172_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u8 rx_ctl = 0x8c;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= 0x01;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= 0x02;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= 0x10;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+	u8 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88172_MEDIUM_DEFAULT;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode |= ~AX88172_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode);
+
+	return 0;
+}
+
+static const struct net_device_ops ax88172_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= asix_ioctl,
+	.ndo_set_rx_mode	= ax88172_set_multicast,
+};
+
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret = 0;
+	u8 buf[ETH_ALEN];
+	int i;
+	unsigned long gpio_bits = dev->driver_info->data;
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Toggle the GPIOs in a manufacturer/model specific way */
+	for (i = 2; i >= 0; i--) {
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+		if (ret < 0)
+			goto out;
+		msleep(5);
+	}
+
+	ret = asix_write_rx_ctl(dev, 0x80);
+	if (ret < 0)
+		goto out;
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
+			   ret);
+		goto out;
+	}
+
+	asix_set_netdev_dev_addr(dev, buf);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x3f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = asix_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &ax88172_netdev_ops;
+	dev->net->ethtool_ops = &ax88172_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(&dev->mii);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct ethtool_ops ax88772_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static int ax88772_link_reset(struct usbnet *dev)
+{
+	u16 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88772_MEDIUM_DEFAULT;
+
+	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
+		mode &= ~AX_MEDIUM_PS;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode &= ~AX_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode);
+
+	return 0;
+}
+
+static int ax88772_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+
+	ret = asix_write_gpio(dev,
+			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	if (ret < 0)
+		goto out;
+
+	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		if (ret < 0)
+			goto out;
+	}
+
+	msleep(150);
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = asix_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			ADVERTISE_ALL | ADVERTISE_CSMA);
+	mii_nway_restart(&dev->mii);
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+				AX88772_IPG2_DEFAULT, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+
+}
+
+static const struct net_device_ops ax88772_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address 	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= asix_ioctl,
+	.ndo_set_rx_mode        = asix_set_multicast,
+};
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret, embd_phy, i;
+	u8 buf[ETH_ALEN];
+	u32 phyid;
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Get the MAC address */
+	if (dev->driver_info->data & FLAG_EEPROM_MAC) {
+		for (i = 0; i < (ETH_ALEN >> 1); i++) {
+			ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
+					0, 2, buf + i * 2);
+			if (ret < 0)
+				break;
+		}
+	} else {
+		ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
+				0, 0, ETH_ALEN, buf);
+	}
+
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+		return ret;
+	}
+
+	asix_set_netdev_dev_addr(dev, buf);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = asix_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &ax88772_netdev_ops;
+	dev->net->ethtool_ops = &ax88772_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
+
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+	/* Reset the PHY to normal operation mode */
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		return ret;
+	}
+
+	ax88772_reset(dev);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = asix_get_phyid(dev);
+	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
+	if (!dev->driver_priv)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	kfree(dev->driver_priv);
+}
+
+static const struct ethtool_ops ax88178_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static int marvell_phy_init(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 reg;
+
+	netdev_dbg(dev->net, "marvell_phy_init()\n");
+
+	reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
+	netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
+			MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
+
+	if (data->ledmode) {
+		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
+
+		reg &= 0xf8ff;
+		reg |= (1 + 0x0100);
+		asix_mdio_write(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL, reg);
+
+		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
+		reg &= 0xfc0f;
+	}
+
+	return 0;
+}
+
+static int rtl8211cl_phy_init(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
+
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
+		asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
+
+	if (data->ledmode == 12) {
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
+	}
+
+	return 0;
+}
+
+static int marvell_led_status(struct usbnet *dev, u16 speed)
+{
+	u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
+
+	netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
+
+	/* Clear out the center LED bits - 0x03F0 */
+	reg &= 0xfc0f;
+
+	switch (speed) {
+		case SPEED_1000:
+			reg |= 0x03e0;
+			break;
+		case SPEED_100:
+			reg |= 0x03b0;
+			break;
+		default:
+			reg |= 0x02f0;
+	}
+
+	netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
+
+	return 0;
+}
+
+static int ax88178_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+	__le16 eeprom;
+	u8 status;
+	int gpio0 = 0;
+	u32 phyid;
+
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
+
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+
+	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
+
+	if (eeprom == cpu_to_le16(0xffff)) {
+		data->phymode = PHY_MODE_MARVELL;
+		data->ledmode = 0;
+		gpio0 = 1;
+	} else {
+		data->phymode = le16_to_cpu(eeprom) & 0x7F;
+		data->ledmode = le16_to_cpu(eeprom) >> 8;
+		gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
+	}
+	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
+
+	/* Power up external GigaPHY through AX88178 GPIO pin */
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	if ((le16_to_cpu(eeprom) >> 8) != 1) {
+		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x001c, 300);
+		asix_write_gpio(dev, 0x003c, 30);
+	} else {
+		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+	}
+
+	/* Read PHYID register *AFTER* powering up PHY */
+	phyid = asix_get_phyid(dev);
+	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
+	asix_sw_reset(dev, 0);
+	msleep(150);
+
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
+
+	asix_write_rx_ctl(dev, 0);
+
+	if (data->phymode == PHY_MODE_MARVELL) {
+		marvell_phy_init(dev);
+		msleep(60);
+	} else if (data->phymode == PHY_MODE_RTL8211CL)
+		rtl8211cl_phy_init(dev);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
+			BMCR_RESET | BMCR_ANENABLE);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+			ADVERTISE_1000FULL);
+
+	mii_nway_restart(&dev->mii);
+
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	if (ret < 0)
+		return ret;
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+	if (ret < 0)
+		return ret;
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ax88178_link_reset(struct usbnet *dev)
+{
+	u16 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u32 speed;
+
+	netdev_dbg(dev->net, "ax88178_link_reset()\n");
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88178_MEDIUM_DEFAULT;
+	speed = ethtool_cmd_speed(&ecmd);
+
+	if (speed == SPEED_1000)
+		mode |= AX_MEDIUM_GM;
+	else if (speed == SPEED_100)
+		mode |= AX_MEDIUM_PS;
+	else
+		mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
+	mode |= AX_MEDIUM_ENCK;
+
+	if (ecmd.duplex == DUPLEX_FULL)
+		mode |= AX_MEDIUM_FD;
+	else
+		mode &= ~AX_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   speed, ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode);
+
+	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
+		marvell_led_status(dev, speed);
+
+	return 0;
+}
+
+static void ax88178_set_mfb(struct usbnet *dev)
+{
+	u16 mfb = AX_RX_CTL_MFB_16384;
+	u16 rxctl;
+	u16 medium;
+	int old_rx_urb_size = dev->rx_urb_size;
+
+	if (dev->hard_mtu < 2048) {
+		dev->rx_urb_size = 2048;
+		mfb = AX_RX_CTL_MFB_2048;
+	} else if (dev->hard_mtu < 4096) {
+		dev->rx_urb_size = 4096;
+		mfb = AX_RX_CTL_MFB_4096;
+	} else if (dev->hard_mtu < 8192) {
+		dev->rx_urb_size = 8192;
+		mfb = AX_RX_CTL_MFB_8192;
+	} else if (dev->hard_mtu < 16384) {
+		dev->rx_urb_size = 16384;
+		mfb = AX_RX_CTL_MFB_16384;
+	}
+
+	rxctl = asix_read_rx_ctl(dev);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+
+	medium = asix_read_medium_status(dev);
+	if (dev->net->mtu > 1500)
+		medium |= AX_MEDIUM_JFE;
+	else
+		medium &= ~AX_MEDIUM_JFE;
+	asix_write_medium_mode(dev, medium);
+
+	if (dev->rx_urb_size > old_rx_urb_size)
+		usbnet_unlink_rx_urbs(dev);
+}
+
+static int ax88178_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	int ll_mtu = new_mtu + net->hard_header_len + 4;
+
+	netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
+
+	if (new_mtu <= 0 || ll_mtu > 16384)
+		return -EINVAL;
+
+	if ((ll_mtu % dev->maxpacket) == 0)
+		return -EDOM;
+
+	net->mtu = new_mtu;
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+	ax88178_set_mfb(dev);
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
+	return 0;
+}
+
+static const struct net_device_ops ax88178_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_set_mac_address 	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_rx_mode	= asix_set_multicast,
+	.ndo_do_ioctl 		= asix_ioctl,
+	.ndo_change_mtu 	= ax88178_change_mtu,
+};
+
+static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 buf[ETH_ALEN];
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+		return ret;
+	}
+
+	asix_set_netdev_dev_addr(dev, buf);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0xff;
+	dev->mii.supports_gmii = 1;
+	dev->mii.phy_id = asix_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &ax88178_netdev_ops;
+	dev->net->ethtool_ops = &ax88178_ethtool_ops;
+
+	/* Blink LEDS so users know driver saw dongle */
+	asix_sw_reset(dev, 0);
+	msleep(150);
+
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
+	if (!dev->driver_priv)
+			return -ENOMEM;
+
+	return 0;
+}
+
+static const struct driver_info ax8817x_info = {
+	.description = "ASIX AX8817x USB 2.0 Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+	.description = "DLink DUB-E100 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+	.description = "Netgear FA-120 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+	.description = "Hawking UF200 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+	.description = "ASIX AX88772 USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.link_reset = ax88772_link_reset,
+	.reset = ax88772_link_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+};
+
+static const struct driver_info ax88772b_info = {
+	.description = "ASIX AX88772B USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.link_reset = ax88772_link_reset,
+	.reset = ax88772_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+	         FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+	.data = FLAG_EEPROM_MAC,
+};
+
+static const struct driver_info ax88178_info = {
+	.description = "ASIX AX88178 USB 2.0 Ethernet",
+	.bind = ax88178_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.link_reset = ax88178_link_reset,
+	.reset = ax88178_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+		 FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+};
+
+/*
+ * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
+ * no-name packaging.
+ * USB device strings are:
+ *   1: Manufacturer: USBLINK
+ *   2: Product: HG20F9 USB2.0
+ *   3: Serial: 000003
+ * Appears to be compatible with Asix 88772B.
+ */
+static const struct driver_info hg20f9_info = {
+	.description = "HG20F9 USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.link_reset = ax88772_link_reset,
+	.reset = ax88772_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+	         FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+	.data = FLAG_EEPROM_MAC,
+};
+
+static const struct usb_device_id	products [] = {
+{
+	// Linksys USB200M
+	USB_DEVICE (0x077b, 0x2226),
+	.driver_info =	(unsigned long) &ax8817x_info,
+}, {
+	// Netgear FA120
+	USB_DEVICE (0x0846, 0x1040),
+	.driver_info =  (unsigned long) &netgear_fa120_info,
+}, {
+	// DLink DUB-E100
+	USB_DEVICE (0x2001, 0x1a00),
+	.driver_info =  (unsigned long) &dlink_dub_e100_info,
+}, {
+	// Intellinet, ST Lab USB Ethernet
+	USB_DEVICE (0x0b95, 0x1720),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Hawking UF200, TrendNet TU2-ET100
+	USB_DEVICE (0x07b8, 0x420a),
+	.driver_info =  (unsigned long) &hawking_uf200_info,
+}, {
+	// Billionton Systems, USB2AR
+	USB_DEVICE (0x08dd, 0x90ff),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// ATEN UC210T
+	USB_DEVICE (0x0557, 0x2009),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Buffalo LUA-U2-KTX
+	USB_DEVICE (0x0411, 0x003d),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Buffalo LUA-U2-GT 10/100/1000
+	USB_DEVICE (0x0411, 0x006e),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+	USB_DEVICE (0x6189, 0x182d),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x0056),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x061c),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// corega FEther USB2-TX
+	USB_DEVICE (0x07aa, 0x0017),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Surecom EP-1427X-2
+	USB_DEVICE (0x1189, 0x0893),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// goodway corp usb gwusb2e
+	USB_DEVICE (0x1631, 0x6200),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// JVC MP-PRX1 Port Replicator
+	USB_DEVICE (0x04f1, 0x3008),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// Lenovo U2L100P 10/100
+	USB_DEVICE (0x17ef, 0x7203),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ASIX AX88772B 10/100
+	USB_DEVICE (0x0b95, 0x772b),
+	.driver_info = (unsigned long) &ax88772b_info,
+}, {
+	// ASIX AX88772 10/100
+	USB_DEVICE (0x0b95, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ASIX AX88178 10/100/1000
+	USB_DEVICE (0x0b95, 0x1780),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Logitec LAN-GTJ/U2A
+	USB_DEVICE (0x0789, 0x0160),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Linksys USB200M Rev 2
+	USB_DEVICE (0x13b1, 0x0018),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// 0Q0 cable ethernet
+	USB_DEVICE (0x1557, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// DLink DUB-E100 H/W Ver B1
+	USB_DEVICE (0x07d1, 0x3c05),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// DLink DUB-E100 H/W Ver B1 Alternate
+	USB_DEVICE (0x2001, 0x3c05),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+       // DLink DUB-E100 H/W Ver C1
+       USB_DEVICE (0x2001, 0x1a02),
+       .driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Linksys USB1000
+	USB_DEVICE (0x1737, 0x0039),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// IO-DATA ETG-US2
+	USB_DEVICE (0x04bb, 0x0930),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Belkin F5D5055
+	USB_DEVICE(0x050d, 0x5055),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Apple USB Ethernet Adapter
+	USB_DEVICE(0x05ac, 0x1402),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Cables-to-Go USB Ethernet Adapter
+	USB_DEVICE(0x0b95, 0x772a),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ABOCOM for pci
+	USB_DEVICE(0x14ea, 0xab11),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// ASIX 88772a
+	USB_DEVICE(0x0db0, 0xa877),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Asus USB Ethernet Adapter
+	USB_DEVICE (0x0b95, 0x7e2b),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	/* ASIX 88172a demo board */
+	USB_DEVICE(0x0b95, 0x172a),
+	.driver_info = (unsigned long) &ax88172a_info,
+}, {
+	/*
+	 * USBLINK HG20F9 "USB 2.0 LAN"
+	 * Appears to have gazumped Linksys's manufacturer ID but
+	 * doesn't (yet) conflict with any known Linksys product.
+	 */
+	USB_DEVICE(0x066b, 0x20f9),
+	.driver_info = (unsigned long) &hg20f9_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+	.name =		DRIVER_NAME,
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disconnect =	usbnet_disconnect,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(asix_driver);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+
diff -Naur backports-4.2.6-1.org/drivers/net/usb/asix.h backports-4.2.6-1/drivers/net/usb/asix.h
--- backports-4.2.6-1.org/drivers/net/usb/asix.h	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/asix.h	2016-06-28 14:35:17.965307221 +0200
@@ -0,0 +1,234 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASIX_H
+#define _ASIX_H
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#define DRIVER_VERSION "22-Dec-2011"
+#define DRIVER_NAME "asix"
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII		0x06
+#define AX_CMD_READ_MII_REG		0x07
+#define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_SET_HW_MII		0x0a
+#define AX_CMD_READ_EEPROM		0x0b
+#define AX_CMD_WRITE_EEPROM		0x0c
+#define AX_CMD_WRITE_ENABLE		0x0d
+#define AX_CMD_WRITE_DISABLE		0x0e
+#define AX_CMD_READ_RX_CTL		0x0f
+#define AX_CMD_WRITE_RX_CTL		0x10
+#define AX_CMD_READ_IPG012		0x11
+#define AX_CMD_WRITE_IPG0		0x12
+#define AX_CMD_WRITE_IPG1		0x13
+#define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
+#define AX_CMD_WRITE_IPG2		0x14
+#define AX_CMD_WRITE_MULTI_FILTER	0x16
+#define AX88172_CMD_READ_NODE_ID	0x17
+#define AX_CMD_READ_PHY_ID		0x19
+#define AX_CMD_READ_MEDIUM_STATUS	0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
+#define AX_CMD_READ_MONITOR_MODE	0x1c
+#define AX_CMD_WRITE_MONITOR_MODE	0x1d
+#define AX_CMD_READ_GPIOS		0x1e
+#define AX_CMD_WRITE_GPIOS		0x1f
+#define AX_CMD_SW_RESET			0x20
+#define AX_CMD_SW_PHY_STATUS		0x21
+#define AX_CMD_SW_PHY_SELECT		0x22
+
+#define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
+#define AX_PHY_SELECT_INTERNAL		0
+#define AX_PHY_SELECT_EXTERNAL		BIT(2)
+
+#define AX_MONITOR_MODE			0x01
+#define AX_MONITOR_LINK			0x02
+#define AX_MONITOR_MAGIC		0x04
+#define AX_MONITOR_HSFS			0x10
+
+/* AX88172 Medium Status Register values */
+#define AX88172_MEDIUM_FD		0x02
+#define AX88172_MEDIUM_TX		0x04
+#define AX88172_MEDIUM_FC		0x10
+#define AX88172_MEDIUM_DEFAULT \
+		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
+
+#define AX_MCAST_FILTER_SIZE		8
+#define AX_MAX_MCAST			64
+
+#define AX_SWRESET_CLEAR		0x00
+#define AX_SWRESET_RR			0x01
+#define AX_SWRESET_RT			0x02
+#define AX_SWRESET_PRTE			0x04
+#define AX_SWRESET_PRL			0x08
+#define AX_SWRESET_BZ			0x10
+#define AX_SWRESET_IPRL			0x20
+#define AX_SWRESET_IPPD			0x40
+
+#define AX88772_IPG0_DEFAULT		0x15
+#define AX88772_IPG1_DEFAULT		0x0c
+#define AX88772_IPG2_DEFAULT		0x12
+
+/* AX88772 & AX88178 Medium Mode Register */
+#define AX_MEDIUM_PF		0x0080
+#define AX_MEDIUM_JFE		0x0040
+#define AX_MEDIUM_TFC		0x0020
+#define AX_MEDIUM_RFC		0x0010
+#define AX_MEDIUM_ENCK		0x0008
+#define AX_MEDIUM_AC		0x0004
+#define AX_MEDIUM_FD		0x0002
+#define AX_MEDIUM_GM		0x0001
+#define AX_MEDIUM_SM		0x1000
+#define AX_MEDIUM_SBP		0x0800
+#define AX_MEDIUM_PS		0x0200
+#define AX_MEDIUM_RE		0x0100
+
+#define AX88178_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
+	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
+	 AX_MEDIUM_RE)
+
+#define AX88772_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
+	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
+	 AX_MEDIUM_AC | AX_MEDIUM_RE)
+
+/* AX88772 & AX88178 RX_CTL values */
+#define AX_RX_CTL_SO		0x0080
+#define AX_RX_CTL_AP		0x0020
+#define AX_RX_CTL_AM		0x0010
+#define AX_RX_CTL_AB		0x0008
+#define AX_RX_CTL_SEP		0x0004
+#define AX_RX_CTL_AMALL		0x0002
+#define AX_RX_CTL_PRO		0x0001
+#define AX_RX_CTL_MFB_2048	0x0000
+#define AX_RX_CTL_MFB_4096	0x0100
+#define AX_RX_CTL_MFB_8192	0x0200
+#define AX_RX_CTL_MFB_16384	0x0300
+
+#define AX_DEFAULT_RX_CTL	(AX_RX_CTL_SO | AX_RX_CTL_AB)
+
+/* GPIO 0 .. 2 toggles */
+#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
+#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
+#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
+#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
+#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
+#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
+#define AX_GPIO_RESERVED	0x40	/* Reserved */
+#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
+
+#define AX_EEPROM_MAGIC		0xdeadbeef
+#define AX_EEPROM_LEN		0x200
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct asix_data {
+	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
+	u8 phymode;
+	u8 ledmode;
+	u8 res;
+};
+
+struct asix_rx_fixup_info {
+	struct sk_buff *ax_skb;
+	u32 header;
+	u16 size;
+	bool split_head;
+};
+
+struct asix_common_private {
+	struct asix_rx_fixup_info rx_fixup_info;
+};
+
+extern const struct driver_info ax88172a_info;
+
+/* ASIX specific flags */
+#define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
+
+int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		  u16 size, void *data);
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data);
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+			  u16 index, u16 size, void *data);
+
+int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
+			   struct asix_rx_fixup_info *rx);
+int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags);
+
+int asix_set_sw_mii(struct usbnet *dev);
+int asix_set_hw_mii(struct usbnet *dev);
+
+int asix_read_phy_addr(struct usbnet *dev, int internal);
+int asix_get_phy_addr(struct usbnet *dev);
+
+int asix_sw_reset(struct usbnet *dev, u8 flags);
+
+u16 asix_read_rx_ctl(struct usbnet *dev);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+
+u16 asix_read_medium_status(struct usbnet *dev);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+
+void asix_set_multicast(struct net_device *net);
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
+
+int asix_get_eeprom_len(struct net_device *net);
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data);
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data);
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info);
+
+int asix_set_mac_address(struct net_device *net, void *p);
+
+#endif /* _ASIX_H */
diff -Naur backports-4.2.6-1.org/drivers/net/usb/ax88172a.c backports-4.2.6-1/drivers/net/usb/ax88172a.c
--- backports-4.2.6-1.org/drivers/net/usb/ax88172a.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/ax88172a.c	2016-06-28 14:35:17.965307221 +0200
@@ -0,0 +1,422 @@
+/*
+ * ASIX AX88172A based USB 2.0 Ethernet Devices
+ * Copyright (C) 2012 OMICRON electronics GmbH
+ *
+ * Supports external PHYs via phylib. Based on the driver for the
+ * AX88772. Original copyrights follow:
+ *
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "asix.h"
+#include <linux/phy.h>
+
+struct ax88172a_private {
+	struct mii_bus *mdio;
+	struct phy_device *phydev;
+	char phy_name[20];
+	u16 phy_addr;
+	u16 oldmode;
+	int use_embdphy;
+	struct asix_rx_fixup_info rx_fixup_info;
+};
+
+/* MDIO read and write wrappers for phylib */
+static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
+			      regnum);
+}
+
+static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
+			       u16 val)
+{
+	asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
+	return 0;
+}
+
+static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	if (!netif_running(net))
+		return -EINVAL;
+
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(net->phydev, rq, cmd);
+}
+
+/* set MAC link settings according to information from phylib */
+static void ax88172a_adjust_link(struct net_device *netdev)
+{
+	struct phy_device *phydev = netdev->phydev;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct ax88172a_private *priv = dev->driver_priv;
+	u16 mode = 0;
+
+	if (phydev->link) {
+		mode = AX88772_MEDIUM_DEFAULT;
+
+		if (phydev->duplex == DUPLEX_HALF)
+			mode &= ~AX_MEDIUM_FD;
+
+		if (phydev->speed != SPEED_100)
+			mode &= ~AX_MEDIUM_PS;
+	}
+
+	if (mode != priv->oldmode) {
+		asix_write_medium_mode(dev, mode);
+		priv->oldmode = mode;
+		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
+			   phydev->speed, phydev->duplex, mode);
+		phy_print_status(phydev);
+	}
+}
+
+static void ax88172a_status(struct usbnet *dev, struct urb *urb)
+{
+	/* link changes are detected by polling the phy */
+}
+
+/* use phylib infrastructure */
+static int ax88172a_init_mdio(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+	int ret, i;
+
+	priv->mdio = mdiobus_alloc();
+	if (!priv->mdio) {
+		netdev_err(dev->net, "Could not allocate MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	priv->mdio->priv = (void *)dev;
+	priv->mdio->read = &asix_mdio_bus_read;
+	priv->mdio->write = &asix_mdio_bus_write;
+	priv->mdio->name = "Asix MDIO Bus";
+	/* mii bus name is usb-<usb bus number>-<usb device number> */
+	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
+		 dev->udev->bus->busnum, dev->udev->devnum);
+
+	priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mdio->irq) {
+		ret = -ENOMEM;
+		goto mfree;
+	}
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		priv->mdio->irq[i] = PHY_POLL;
+
+	ret = mdiobus_register(priv->mdio);
+	if (ret) {
+		netdev_err(dev->net, "Could not register MDIO bus\n");
+		goto ifree;
+	}
+
+	netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
+	return 0;
+
+ifree:
+	kfree(priv->mdio->irq);
+mfree:
+	mdiobus_free(priv->mdio);
+	return ret;
+}
+
+static void ax88172a_remove_mdio(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
+	mdiobus_unregister(priv->mdio);
+	kfree(priv->mdio->irq);
+	mdiobus_free(priv->mdio);
+}
+
+static const struct net_device_ops ax88172a_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= ax88172a_ioctl,
+	.ndo_set_rx_mode        = asix_set_multicast,
+};
+
+static int ax88172a_get_settings(struct net_device *net,
+				 struct ethtool_cmd *cmd)
+{
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_ethtool_gset(net->phydev, cmd);
+}
+
+static int ax88172a_set_settings(struct net_device *net,
+				 struct ethtool_cmd *cmd)
+{
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_ethtool_sset(net->phydev, cmd);
+}
+
+static int ax88172a_nway_reset(struct net_device *net)
+{
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_start_aneg(net->phydev);
+}
+
+static const struct ethtool_ops ax88172a_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= usbnet_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.get_settings		= ax88172a_get_settings,
+	.set_settings		= ax88172a_set_settings,
+	.nway_reset		= ax88172a_nway_reset,
+};
+
+static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
+{
+	int ret;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	if (ret < 0)
+		goto err;
+
+	msleep(150);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		goto err;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+err:
+	return ret;
+}
+
+
+static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 buf[ETH_ALEN];
+	struct ax88172a_private *priv;
+
+	usbnet_get_endpoints(dev, intf);
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev->driver_priv = priv;
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
+		goto free;
+	}
+	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+	dev->net->netdev_ops = &ax88172a_netdev_ops;
+	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
+
+	/* are we using the internal or the external phy? */
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
+			   ret);
+		goto free;
+	}
+
+	netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
+	switch (buf[0] & AX_PHY_SELECT_MASK) {
+	case AX_PHY_SELECT_INTERNAL:
+		netdev_dbg(dev->net, "use internal phy\n");
+		priv->use_embdphy = 1;
+		break;
+	case AX_PHY_SELECT_EXTERNAL:
+		netdev_dbg(dev->net, "use external phy\n");
+		priv->use_embdphy = 0;
+		break;
+	default:
+		netdev_err(dev->net, "Interface mode not supported by driver\n");
+		ret = -ENOTSUPP;
+		goto free;
+	}
+
+	priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
+	ax88172a_reset_phy(dev, priv->use_embdphy);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	/* init MDIO bus */
+	ret = ax88172a_init_mdio(dev);
+	if (ret)
+		goto free;
+
+	return 0;
+
+free:
+	kfree(priv);
+	return ret;
+}
+
+static int ax88172a_stop(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	netdev_dbg(dev->net, "Stopping interface\n");
+
+	if (priv->phydev) {
+		netdev_info(dev->net, "Disconnecting from phy %s\n",
+			    priv->phy_name);
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+	}
+
+	return 0;
+}
+
+static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	ax88172a_remove_mdio(dev);
+	kfree(priv);
+}
+
+static int ax88172a_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct ax88172a_private *priv = dev->driver_priv;
+	int ret;
+	u16 rx_ctl;
+
+	ax88172a_reset_phy(dev, priv->use_embdphy);
+
+	msleep(150);
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = asix_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	msleep(150);
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+			     data->mac_addr);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev);
+	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	/* Connect to PHY */
+	snprintf(priv->phy_name, 20, PHY_ID_FMT,
+		 priv->mdio->id, priv->phy_addr);
+
+	priv->phydev = phy_connect(dev->net, priv->phy_name,
+				   &ax88172a_adjust_link,
+				   PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(priv->phydev)) {
+		netdev_err(dev->net, "Could not connect to PHY device %s\n",
+			   priv->phy_name);
+		ret = PTR_ERR(priv->phydev);
+		goto out;
+	}
+
+	netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
+
+	/* During power-up, the AX88172A set the power down (BMCR_PDOWN)
+	 * bit of the PHY. Bring the PHY up again.
+	 */
+	genphy_resume(priv->phydev);
+	phy_start(priv->phydev);
+
+	return 0;
+
+out:
+	return ret;
+
+}
+
+static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct ax88172a_private *dp = dev->driver_priv;
+	struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
+
+	return asix_rx_fixup_internal(dev, skb, rx);
+}
+
+const struct driver_info ax88172a_info = {
+	.description = "ASIX AX88172A USB 2.0 Ethernet",
+	.bind = ax88172a_bind,
+	.reset = ax88172a_reset,
+	.stop = ax88172a_stop,
+	.unbind = ax88172a_unbind,
+	.status = ax88172a_status,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+		 FLAG_MULTI_PACKET,
+	.rx_fixup = ax88172a_rx_fixup,
+	.tx_fixup = asix_tx_fixup,
+};
diff -Naur backports-4.2.6-1.org/drivers/net/usb/ax88179_178a.c backports-4.2.6-1/drivers/net/usb/ax88179_178a.c
--- backports-4.2.6-1.org/drivers/net/usb/ax88179_178a.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/ax88179_178a.c	2016-06-28 14:35:17.968640554 +0200
@@ -0,0 +1,1756 @@
+/*
+ * ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet Devices
+ *
+ * Copyright (C) 2011-2013 ASIX
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <uapi/linux/mdio.h>
+#include <linux/mdio.h>
+
+#define AX88179_PHY_ID				0x03
+#define AX_EEPROM_LEN				0x100
+#define AX88179_EEPROM_MAGIC			0x17900b95
+#define AX_MCAST_FLTSIZE			8
+#define AX_MAX_MCAST				64
+#define AX_INT_PPLS_LINK			((u32)BIT(16))
+#define AX_RXHDR_L4_TYPE_MASK			0x1c
+#define AX_RXHDR_L4_TYPE_UDP			4
+#define AX_RXHDR_L4_TYPE_TCP			16
+#define AX_RXHDR_L3CSUM_ERR			2
+#define AX_RXHDR_L4CSUM_ERR			1
+#define AX_RXHDR_CRC_ERR			((u32)BIT(29))
+#define AX_RXHDR_DROP_ERR			((u32)BIT(31))
+#define AX_ACCESS_MAC				0x01
+#define AX_ACCESS_PHY				0x02
+#define AX_ACCESS_EEPROM			0x04
+#define AX_ACCESS_EFUS				0x05
+#define AX_PAUSE_WATERLVL_HIGH			0x54
+#define AX_PAUSE_WATERLVL_LOW			0x55
+
+#define PHYSICAL_LINK_STATUS			0x02
+	#define	AX_USB_SS		0x04
+	#define	AX_USB_HS		0x02
+
+#define GENERAL_STATUS				0x03
+/* Check AX88179 version. UA1:Bit2 = 0,  UA2:Bit2 = 1 */
+	#define	AX_SECLD		0x04
+
+#define AX_SROM_ADDR				0x07
+#define AX_SROM_CMD				0x0a
+	#define EEP_RD			0x04
+	#define EEP_BUSY		0x10
+
+#define AX_SROM_DATA_LOW			0x08
+#define AX_SROM_DATA_HIGH			0x09
+
+#define AX_RX_CTL				0x0b
+	#define AX_RX_CTL_DROPCRCERR	0x0100
+	#define AX_RX_CTL_IPE		0x0200
+	#define AX_RX_CTL_START		0x0080
+	#define AX_RX_CTL_AP		0x0020
+	#define AX_RX_CTL_AM		0x0010
+	#define AX_RX_CTL_AB		0x0008
+	#define AX_RX_CTL_AMALL		0x0002
+	#define AX_RX_CTL_PRO		0x0001
+	#define AX_RX_CTL_STOP		0x0000
+
+#define AX_NODE_ID				0x10
+#define AX_MULFLTARY				0x16
+
+#define AX_MEDIUM_STATUS_MODE			0x22
+	#define AX_MEDIUM_GIGAMODE	0x01
+	#define AX_MEDIUM_FULL_DUPLEX	0x02
+	#define AX_MEDIUM_EN_125MHZ	0x08
+	#define AX_MEDIUM_RXFLOW_CTRLEN	0x10
+	#define AX_MEDIUM_TXFLOW_CTRLEN	0x20
+	#define AX_MEDIUM_RECEIVE_EN	0x100
+	#define AX_MEDIUM_PS		0x200
+	#define AX_MEDIUM_JUMBO_EN	0x8040
+
+#define AX_MONITOR_MOD				0x24
+	#define AX_MONITOR_MODE_RWLC	0x02
+	#define AX_MONITOR_MODE_RWMP	0x04
+	#define AX_MONITOR_MODE_PMEPOL	0x20
+	#define AX_MONITOR_MODE_PMETYPE	0x40
+
+#define AX_GPIO_CTRL				0x25
+	#define AX_GPIO_CTRL_GPIO3EN	0x80
+	#define AX_GPIO_CTRL_GPIO2EN	0x40
+	#define AX_GPIO_CTRL_GPIO1EN	0x20
+
+#define AX_PHYPWR_RSTCTL			0x26
+	#define AX_PHYPWR_RSTCTL_BZ	0x0010
+	#define AX_PHYPWR_RSTCTL_IPRL	0x0020
+	#define AX_PHYPWR_RSTCTL_AT	0x1000
+
+#define AX_RX_BULKIN_QCTRL			0x2e
+#define AX_CLK_SELECT				0x33
+	#define AX_CLK_SELECT_BCS	0x01
+	#define AX_CLK_SELECT_ACS	0x02
+	#define AX_CLK_SELECT_ULR	0x08
+
+#define AX_RXCOE_CTL				0x34
+	#define AX_RXCOE_IP		0x01
+	#define AX_RXCOE_TCP		0x02
+	#define AX_RXCOE_UDP		0x04
+	#define AX_RXCOE_TCPV6		0x20
+	#define AX_RXCOE_UDPV6		0x40
+
+#define AX_TXCOE_CTL				0x35
+	#define AX_TXCOE_IP		0x01
+	#define AX_TXCOE_TCP		0x02
+	#define AX_TXCOE_UDP		0x04
+	#define AX_TXCOE_TCPV6		0x20
+	#define AX_TXCOE_UDPV6		0x40
+
+#define AX_LEDCTRL				0x73
+
+#define GMII_PHY_PHYSR				0x11
+	#define GMII_PHY_PHYSR_SMASK	0xc000
+	#define GMII_PHY_PHYSR_GIGA	0x8000
+	#define GMII_PHY_PHYSR_100	0x4000
+	#define GMII_PHY_PHYSR_FULL	0x2000
+	#define GMII_PHY_PHYSR_LINK	0x400
+
+#define GMII_LED_ACT				0x1a
+	#define	GMII_LED_ACTIVE_MASK	0xff8f
+	#define	GMII_LED0_ACTIVE	BIT(4)
+	#define	GMII_LED1_ACTIVE	BIT(5)
+	#define	GMII_LED2_ACTIVE	BIT(6)
+
+#define GMII_LED_LINK				0x1c
+	#define	GMII_LED_LINK_MASK	0xf888
+	#define	GMII_LED0_LINK_10	BIT(0)
+	#define	GMII_LED0_LINK_100	BIT(1)
+	#define	GMII_LED0_LINK_1000	BIT(2)
+	#define	GMII_LED1_LINK_10	BIT(4)
+	#define	GMII_LED1_LINK_100	BIT(5)
+	#define	GMII_LED1_LINK_1000	BIT(6)
+	#define	GMII_LED2_LINK_10	BIT(8)
+	#define	GMII_LED2_LINK_100	BIT(9)
+	#define	GMII_LED2_LINK_1000	BIT(10)
+	#define	LED0_ACTIVE		BIT(0)
+	#define	LED0_LINK_10		BIT(1)
+	#define	LED0_LINK_100		BIT(2)
+	#define	LED0_LINK_1000		BIT(3)
+	#define	LED0_FD			BIT(4)
+	#define	LED0_USB3_MASK		0x001f
+	#define	LED1_ACTIVE		BIT(5)
+	#define	LED1_LINK_10		BIT(6)
+	#define	LED1_LINK_100		BIT(7)
+	#define	LED1_LINK_1000		BIT(8)
+	#define	LED1_FD			BIT(9)
+	#define	LED1_USB3_MASK		0x03e0
+	#define	LED2_ACTIVE		BIT(10)
+	#define	LED2_LINK_1000		BIT(13)
+	#define	LED2_LINK_100		BIT(12)
+	#define	LED2_LINK_10		BIT(11)
+	#define	LED2_FD			BIT(14)
+	#define	LED_VALID		BIT(15)
+	#define	LED2_USB3_MASK		0x7c00
+
+#define GMII_PHYPAGE				0x1e
+#define GMII_PHY_PAGE_SELECT			0x1f
+	#define GMII_PHY_PGSEL_EXT	0x0007
+	#define GMII_PHY_PGSEL_PAGE0	0x0000
+	#define GMII_PHY_PGSEL_PAGE3	0x0003
+	#define GMII_PHY_PGSEL_PAGE5	0x0005
+
+struct ax88179_data {
+	u8  eee_enabled;
+	u8  eee_active;
+	u16 rxctl;
+	u16 reserved;
+};
+
+struct ax88179_int_data {
+	__le32 intdata1;
+	__le32 intdata2;
+};
+
+static const struct {
+	unsigned char ctrl, timer_l, timer_h, size, ifg;
+} AX88179_BULKIN_SIZE[] =	{
+	{7, 0x4f, 0,	0x12, 0xff},
+	{7, 0x20, 3,	0x16, 0xff},
+	{7, 0xae, 7,	0x18, 0xff},
+	{7, 0xcc, 0x4c, 0x18, 8},
+};
+
+static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			      u16 size, void *data, int in_pm)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			       u16 size, void *data, int in_pm)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static void ax88179_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+				    u16 index, u16 size, void *data)
+{
+	u16 buf;
+
+	if (2 == size) {
+		buf = *((u16 *)data);
+		cpu_to_le16s(&buf);
+		usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				       USB_RECIP_DEVICE, value, index, &buf,
+				       size);
+	} else {
+		usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				       USB_RECIP_DEVICE, value, index, data,
+				       size);
+	}
+}
+
+static int ax88179_read_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				 u16 index, u16 size, void *data)
+{
+	int ret;
+
+	if (2 == size) {
+		u16 buf;
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
+		le16_to_cpus(&buf);
+		*((u16 *)data) = buf;
+	} else if (4 == size) {
+		u32 buf;
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
+		le32_to_cpus(&buf);
+		*((u32 *)data) = buf;
+	} else {
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 1);
+	}
+
+	return ret;
+}
+
+static int ax88179_write_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				  u16 index, u16 size, void *data)
+{
+	int ret;
+
+	if (2 == size) {
+		u16 buf;
+		buf = *((u16 *)data);
+		cpu_to_le16s(&buf);
+		ret = __ax88179_write_cmd(dev, cmd, value, index,
+					  size, &buf, 1);
+	} else {
+		ret = __ax88179_write_cmd(dev, cmd, value, index,
+					  size, data, 1);
+	}
+
+	return ret;
+}
+
+static int ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			    u16 size, void *data)
+{
+	int ret;
+
+	if (2 == size) {
+		u16 buf;
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
+		le16_to_cpus(&buf);
+		*((u16 *)data) = buf;
+	} else if (4 == size) {
+		u32 buf;
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
+		le32_to_cpus(&buf);
+		*((u32 *)data) = buf;
+	} else {
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 0);
+	}
+
+	return ret;
+}
+
+static int ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			     u16 size, void *data)
+{
+	int ret;
+
+	if (2 == size) {
+		u16 buf;
+		buf = *((u16 *)data);
+		cpu_to_le16s(&buf);
+		ret = __ax88179_write_cmd(dev, cmd, value, index,
+					  size, &buf, 0);
+	} else {
+		ret = __ax88179_write_cmd(dev, cmd, value, index,
+					  size, data, 0);
+	}
+
+	return ret;
+}
+
+static void ax88179_status(struct usbnet *dev, struct urb *urb)
+{
+	struct ax88179_int_data *event;
+	u32 link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	le32_to_cpus((void *)&event->intdata1);
+
+	link = (((__force u32)event->intdata1) & AX_INT_PPLS_LINK) >> 16;
+
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_info(dev->net, "ax88179 - Link status is: %d\n", link);
+	}
+}
+
+static int ax88179_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 res;
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+	return res;
+}
+
+static void ax88179_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			       int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 res = (u16) val;
+
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+}
+
+static inline int ax88179_phy_mmd_indirect(struct usbnet *dev, u16 prtad,
+					   u16 devad)
+{
+	u16 tmp16;
+	int ret;
+
+	tmp16 = devad;
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_CTRL, 2, &tmp16);
+
+	tmp16 = prtad;
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_DATA, 2, &tmp16);
+
+	tmp16 = devad | MII_MMD_CTRL_NOINCR;
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_CTRL, 2, &tmp16);
+
+	return ret;
+}
+
+static int
+ax88179_phy_read_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad)
+{
+	int ret;
+	u16 tmp16;
+
+	ax88179_phy_mmd_indirect(dev, prtad, devad);
+
+	ret = ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			       MII_MMD_DATA, 2, &tmp16);
+	if (ret < 0)
+		return ret;
+
+	return tmp16;
+}
+
+static int
+ax88179_phy_write_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad,
+			       u16 data)
+{
+	int ret;
+
+	ax88179_phy_mmd_indirect(dev, prtad, devad);
+
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_DATA, 2, &data);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	u16 tmp16;
+	u8 tmp8;
+
+	usbnet_suspend(intf, message);
+
+	/* Disable RX path */
+	ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			      2, 2, &tmp16);
+	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			       2, 2, &tmp16);
+
+	/* Force bulk-in zero length */
+	ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+			      2, 2, &tmp16);
+
+	tmp16 |= AX_PHYPWR_RSTCTL_BZ | AX_PHYPWR_RSTCTL_IPRL;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+			       2, 2, &tmp16);
+
+	/* change clock */
+	tmp8 = 0;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+	/* Configure RX control register => stop operation */
+	tmp16 = AX_RX_CTL_STOP;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+	return 0;
+}
+
+/* This function is used to enable the autodetach function. */
+/* This function is determined by offset 0x43 of EEPROM */
+static int ax88179_auto_detach(struct usbnet *dev, int in_pm)
+{
+	u16 tmp16;
+	u8 tmp8;
+	int (*fnr)(struct usbnet *, u8, u16, u16, u16, void *);
+	int (*fnw)(struct usbnet *, u8, u16, u16, u16, void *);
+
+	if (!in_pm) {
+		fnr = ax88179_read_cmd;
+		fnw = ax88179_write_cmd;
+	} else {
+		fnr = ax88179_read_cmd_nopm;
+		fnw = ax88179_write_cmd_nopm;
+	}
+
+	if (fnr(dev, AX_ACCESS_EEPROM, 0x43, 1, 2, &tmp16) < 0)
+		return 0;
+
+	if ((tmp16 == 0xFFFF) || (!(tmp16 & 0x0100)))
+		return 0;
+
+	/* Enable Auto Detach bit */
+	tmp8 = 0;
+	fnr(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+	tmp8 |= AX_CLK_SELECT_ULR;
+	fnw(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+	fnr(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+	tmp16 |= AX_PHYPWR_RSTCTL_AT;
+	fnw(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+
+	return 0;
+}
+
+static int ax88179_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	u16 tmp16;
+	u8 tmp8;
+
+	usbnet_link_change(dev, 0, 0);
+
+	/* Power up ethernet PHY */
+	tmp16 = 0;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+			       2, 2, &tmp16);
+	udelay(1000);
+
+	tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+			       2, 2, &tmp16);
+	msleep(200);
+
+	/* Ethernet PHY Auto Detach*/
+	ax88179_auto_detach(dev, 1);
+
+	/* Enable clock */
+	ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC,  AX_CLK_SELECT, 1, 1, &tmp8);
+	tmp8 |= AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+	msleep(100);
+
+	/* Configure RX control register => start operation */
+	tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+		AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+	ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+	return usbnet_resume(intf);
+}
+
+static void
+ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+			     1, 1, &opt) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & AX_MONITOR_MODE_RWLC)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & AX_MONITOR_MODE_RWMP)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= AX_MONITOR_MODE_RWLC;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= AX_MONITOR_MODE_RWMP;
+
+	if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+			      1, 1, &opt) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ax88179_get_eeprom_len(struct net_device *net)
+{
+	return AX_EEPROM_LEN;
+}
+
+static int
+ax88179_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		   u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i, ret;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = AX88179_EEPROM_MAGIC;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+			      GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* ax88179/178A returns 2 bytes from eeprom on read */
+	for (i = first_word; i <= last_word; i++) {
+		ret = __ax88179_read_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
+					 &eeprom_buff[i - first_word],
+					 0);
+		if (ret < 0) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+	return 0;
+}
+
+static int ax88179_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return mii_ethtool_gset(&dev->mii, cmd);
+}
+
+static int ax88179_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return mii_ethtool_sset(&dev->mii, cmd);
+}
+
+static int
+ax88179_ethtool_get_eee(struct usbnet *dev, struct ethtool_eee *data)
+{
+	int val;
+
+	/* Get Supported EEE */
+	val = ax88179_phy_read_mmd_indirect(dev, MDIO_PCS_EEE_ABLE,
+					    MDIO_MMD_PCS);
+	if (val < 0)
+		return val;
+	data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+	/* Get advertisement EEE */
+	val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_ADV,
+					    MDIO_MMD_AN);
+	if (val < 0)
+		return val;
+	data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	/* Get LP advertisement EEE */
+	val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_LPABLE,
+					    MDIO_MMD_AN);
+	if (val < 0)
+		return val;
+	data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	return 0;
+}
+
+static int
+ax88179_ethtool_set_eee(struct usbnet *dev, struct ethtool_eee *data)
+{
+	u16 tmp16 = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
+
+	return ax88179_phy_write_mmd_indirect(dev, MDIO_AN_EEE_ADV,
+					      MDIO_MMD_AN, tmp16);
+}
+
+static int ax88179_chk_eee(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	struct ax88179_data *priv = (struct ax88179_data *)dev->data;
+
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	if (ecmd.duplex & DUPLEX_FULL) {
+		int eee_lp, eee_cap, eee_adv;
+		u32 lp, cap, adv, supported = 0;
+
+		eee_cap = ax88179_phy_read_mmd_indirect(dev,
+							MDIO_PCS_EEE_ABLE,
+							MDIO_MMD_PCS);
+		if (eee_cap < 0) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
+		if (!cap) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		eee_lp = ax88179_phy_read_mmd_indirect(dev,
+						       MDIO_AN_EEE_LPABLE,
+						       MDIO_MMD_AN);
+		if (eee_lp < 0) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		eee_adv = ax88179_phy_read_mmd_indirect(dev,
+							MDIO_AN_EEE_ADV,
+							MDIO_MMD_AN);
+
+		if (eee_adv < 0) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
+		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
+		supported = (ecmd.speed == SPEED_1000) ?
+			     SUPPORTED_1000baseT_Full :
+			     SUPPORTED_100baseT_Full;
+
+		if (!(lp & adv & supported)) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		priv->eee_active = 1;
+		return true;
+	}
+
+	priv->eee_active = 0;
+	return false;
+}
+
+static void ax88179_disable_eee(struct usbnet *dev)
+{
+	u16 tmp16;
+
+	tmp16 = GMII_PHY_PGSEL_PAGE3;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+
+	tmp16 = 0x3246;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  MII_PHYADDR, 2, &tmp16);
+
+	tmp16 = GMII_PHY_PGSEL_PAGE0;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+}
+
+static void ax88179_enable_eee(struct usbnet *dev)
+{
+	u16 tmp16;
+
+	tmp16 = GMII_PHY_PGSEL_PAGE3;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+
+	tmp16 = 0x3247;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  MII_PHYADDR, 2, &tmp16);
+
+	tmp16 = GMII_PHY_PGSEL_PAGE5;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+
+	tmp16 = 0x0680;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  MII_BMSR, 2, &tmp16);
+
+	tmp16 = GMII_PHY_PGSEL_PAGE0;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+}
+
+static int ax88179_get_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *priv = (struct ax88179_data *)dev->data;
+
+	edata->eee_enabled = priv->eee_enabled;
+	edata->eee_active = priv->eee_active;
+
+	return ax88179_ethtool_get_eee(dev, edata);
+}
+
+static int ax88179_set_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *priv = (struct ax88179_data *)dev->data;
+	int ret = -EOPNOTSUPP;
+
+	priv->eee_enabled = edata->eee_enabled;
+	if (!priv->eee_enabled) {
+		ax88179_disable_eee(dev);
+	} else {
+		priv->eee_enabled = ax88179_chk_eee(dev);
+		if (!priv->eee_enabled)
+			return -EOPNOTSUPP;
+
+		ax88179_enable_eee(dev);
+	}
+
+	ret = ax88179_ethtool_set_eee(dev, edata);
+	if (ret)
+		return ret;
+
+	mii_nway_restart(&dev->mii);
+
+	usbnet_link_change(dev, 0, 0);
+
+	return ret;
+}
+
+static int ax88179_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops ax88179_ethtool_ops = {
+	.get_link		= ethtool_op_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= ax88179_get_wol,
+	.set_wol		= ax88179_set_wol,
+	.get_eeprom_len		= ax88179_get_eeprom_len,
+	.get_eeprom		= ax88179_get_eeprom,
+	.get_settings		= ax88179_get_settings,
+	.set_settings		= ax88179_set_settings,
+	.get_eee		= ax88179_get_eee,
+	.set_eee		= ax88179_set_eee,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static void ax88179_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *data = (struct ax88179_data *)dev->data;
+	u8 *m_filter = ((u8 *)dev->data) + 12;
+
+	data->rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_IPE);
+
+	if (net->flags & IFF_PROMISC) {
+		data->rxctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		data->rxctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data for our 8 byte filter buffer
+		 * to avoid allocating memory that is tricky to free later
+		 */
+		u32 crc_bits;
+		struct netdev_hw_addr *ha;
+
+		memset(m_filter, 0, AX_MCAST_FLTSIZE);
+
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			*(m_filter + (crc_bits >> 3)) |= (1 << (crc_bits & 7));
+		}
+
+		ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_MULFLTARY,
+					AX_MCAST_FLTSIZE, AX_MCAST_FLTSIZE,
+					m_filter);
+
+		data->rxctl |= AX_RX_CTL_AM;
+	}
+
+	ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_RX_CTL,
+				2, 2, &data->rxctl);
+}
+
+static int
+ax88179_set_features(struct net_device *net, netdev_features_t features)
+{
+	u8 tmp;
+	struct usbnet *dev = netdev_priv(net);
+	netdev_features_t changed = net->features ^ features;
+
+	if (changed & NETIF_F_IP_CSUM) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+		tmp ^= AX_TXCOE_TCP | AX_TXCOE_UDP;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+	}
+
+	if (changed & NETIF_F_IPV6_CSUM) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+		tmp ^= AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+	}
+
+	if (changed & NETIF_F_RXCSUM) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+		tmp ^= AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+		       AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+	}
+
+	return 0;
+}
+
+static int ax88179_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 tmp16;
+
+	if (new_mtu <= 0 || new_mtu > 4088)
+		return -EINVAL;
+
+	net->mtu = new_mtu;
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+
+	if (net->mtu > 1500) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				 2, 2, &tmp16);
+		tmp16 |= AX_MEDIUM_JUMBO_EN;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				  2, 2, &tmp16);
+	} else {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				 2, 2, &tmp16);
+		tmp16 &= ~AX_MEDIUM_JUMBO_EN;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				  2, 2, &tmp16);
+	}
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
+	return 0;
+}
+
+static int ax88179_set_mac_addr(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sockaddr *addr = p;
+	int ret;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* Set the MAC address */
+	ret = ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+				 ETH_ALEN, net->dev_addr);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct net_device_ops ax88179_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= ax88179_change_mtu,
+	.ndo_set_mac_address	= ax88179_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= ax88179_ioctl,
+	.ndo_set_rx_mode	= ax88179_set_multicast,
+	.ndo_set_features	= ax88179_set_features,
+};
+
+static int ax88179_check_eeprom(struct usbnet *dev)
+{
+	u8 i, buf, eeprom[20];
+	u16 csum, delay = HZ / 10;
+	unsigned long jtimeout;
+
+	/* Read EEPROM content */
+	for (i = 0; i < 6; i++) {
+		buf = i;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+				      1, 1, &buf) < 0)
+			return -EINVAL;
+
+		buf = EEP_RD;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+				      1, 1, &buf) < 0)
+			return -EINVAL;
+
+		jtimeout = jiffies + delay;
+		do {
+			ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+					 1, 1, &buf);
+
+			if (time_after(jiffies, jtimeout))
+				return -EINVAL;
+
+		} while (buf & EEP_BUSY);
+
+		__ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+				   2, 2, &eeprom[i * 2], 0);
+
+		if ((i == 0) && (eeprom[0] == 0xFF))
+			return -EINVAL;
+	}
+
+	csum = eeprom[6] + eeprom[7] + eeprom[8] + eeprom[9];
+	csum = (csum >> 8) + (csum & 0xff);
+	if ((csum + eeprom[10]) != 0xff)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ax88179_check_efuse(struct usbnet *dev, u16 *ledmode)
+{
+	u8	i;
+	u8	efuse[64];
+	u16	csum = 0;
+
+	if (ax88179_read_cmd(dev, AX_ACCESS_EFUS, 0, 64, 64, efuse) < 0)
+		return -EINVAL;
+
+	if (*efuse == 0xFF)
+		return -EINVAL;
+
+	for (i = 0; i < 64; i++)
+		csum = csum + efuse[i];
+
+	while (csum > 255)
+		csum = (csum & 0x00FF) + ((csum >> 8) & 0x00FF);
+
+	if (csum != 0xFF)
+		return -EINVAL;
+
+	*ledmode = (efuse[51] << 8) | efuse[52];
+
+	return 0;
+}
+
+static int ax88179_convert_old_led(struct usbnet *dev, u16 *ledvalue)
+{
+	u16 led;
+
+	/* Loaded the old eFuse LED Mode */
+	if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM, 0x3C, 1, 2, &led) < 0)
+		return -EINVAL;
+
+	led >>= 8;
+	switch (led) {
+	case 0xFF:
+		led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+		      LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+		      LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+		break;
+	case 0xFE:
+		led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 | LED_VALID;
+		break;
+	case 0xFD:
+		led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 |
+		      LED2_LINK_10 | LED_VALID;
+		break;
+	case 0xFC:
+		led = LED0_ACTIVE | LED1_ACTIVE | LED1_LINK_1000 | LED2_ACTIVE |
+		      LED2_LINK_100 | LED2_LINK_10 | LED_VALID;
+		break;
+	default:
+		led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+		      LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+		      LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+		break;
+	}
+
+	*ledvalue = led;
+
+	return 0;
+}
+
+static int ax88179_led_setting(struct usbnet *dev)
+{
+	u8 ledfd, value = 0;
+	u16 tmp, ledact, ledlink, ledvalue = 0, delay = HZ / 10;
+	unsigned long jtimeout;
+
+	/* Check AX88179 version. UA1 or UA2*/
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, GENERAL_STATUS, 1, 1, &value);
+
+	if (!(value & AX_SECLD)) {	/* UA1 */
+		value = AX_GPIO_CTRL_GPIO3EN | AX_GPIO_CTRL_GPIO2EN |
+			AX_GPIO_CTRL_GPIO1EN;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_GPIO_CTRL,
+				      1, 1, &value) < 0)
+			return -EINVAL;
+	}
+
+	/* Check EEPROM */
+	if (!ax88179_check_eeprom(dev)) {
+		value = 0x42;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+				      1, 1, &value) < 0)
+			return -EINVAL;
+
+		value = EEP_RD;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+				      1, 1, &value) < 0)
+			return -EINVAL;
+
+		jtimeout = jiffies + delay;
+		do {
+			ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+					 1, 1, &value);
+
+			if (time_after(jiffies, jtimeout))
+				return -EINVAL;
+
+		} while (value & EEP_BUSY);
+
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_HIGH,
+				 1, 1, &value);
+		ledvalue = (value << 8);
+
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+				 1, 1, &value);
+		ledvalue |= value;
+
+		/* load internal ROM for defaule setting */
+		if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+			ax88179_convert_old_led(dev, &ledvalue);
+
+	} else if (!ax88179_check_efuse(dev, &ledvalue)) {
+		if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+			ax88179_convert_old_led(dev, &ledvalue);
+	} else {
+		ax88179_convert_old_led(dev, &ledvalue);
+	}
+
+	tmp = GMII_PHY_PGSEL_EXT;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+	tmp = 0x2c;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHYPAGE, 2, &tmp);
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			 GMII_LED_ACT, 2, &ledact);
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			 GMII_LED_LINK, 2, &ledlink);
+
+	ledact &= GMII_LED_ACTIVE_MASK;
+	ledlink &= GMII_LED_LINK_MASK;
+
+	if (ledvalue & LED0_ACTIVE)
+		ledact |= GMII_LED0_ACTIVE;
+
+	if (ledvalue & LED1_ACTIVE)
+		ledact |= GMII_LED1_ACTIVE;
+
+	if (ledvalue & LED2_ACTIVE)
+		ledact |= GMII_LED2_ACTIVE;
+
+	if (ledvalue & LED0_LINK_10)
+		ledlink |= GMII_LED0_LINK_10;
+
+	if (ledvalue & LED1_LINK_10)
+		ledlink |= GMII_LED1_LINK_10;
+
+	if (ledvalue & LED2_LINK_10)
+		ledlink |= GMII_LED2_LINK_10;
+
+	if (ledvalue & LED0_LINK_100)
+		ledlink |= GMII_LED0_LINK_100;
+
+	if (ledvalue & LED1_LINK_100)
+		ledlink |= GMII_LED1_LINK_100;
+
+	if (ledvalue & LED2_LINK_100)
+		ledlink |= GMII_LED2_LINK_100;
+
+	if (ledvalue & LED0_LINK_1000)
+		ledlink |= GMII_LED0_LINK_1000;
+
+	if (ledvalue & LED1_LINK_1000)
+		ledlink |= GMII_LED1_LINK_1000;
+
+	if (ledvalue & LED2_LINK_1000)
+		ledlink |= GMII_LED2_LINK_1000;
+
+	tmp = ledact;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_LED_ACT, 2, &tmp);
+
+	tmp = ledlink;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_LED_LINK, 2, &tmp);
+
+	tmp = GMII_PHY_PGSEL_PAGE0;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+	/* LED full duplex setting */
+	ledfd = 0;
+	if (ledvalue & LED0_FD)
+		ledfd |= 0x01;
+	else if ((ledvalue & LED0_USB3_MASK) == 0)
+		ledfd |= 0x02;
+
+	if (ledvalue & LED1_FD)
+		ledfd |= 0x04;
+	else if ((ledvalue & LED1_USB3_MASK) == 0)
+		ledfd |= 0x08;
+
+	if (ledvalue & LED2_FD)
+		ledfd |= 0x10;
+	else if ((ledvalue & LED2_USB3_MASK) == 0)
+		ledfd |= 0x20;
+
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_LEDCTRL, 1, 1, &ledfd);
+
+	return 0;
+}
+
+static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8 buf[5];
+	u16 *tmp16;
+	u8 *tmp;
+	struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+	struct ethtool_eee eee_data;
+
+	usbnet_get_endpoints(dev, intf);
+
+	tmp16 = (u16 *)buf;
+	tmp = (u8 *)buf;
+
+	memset(ax179_data, 0, sizeof(*ax179_data));
+
+	/* Power up ethernet PHY */
+	*tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+	*tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+	msleep(200);
+
+	*tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+	msleep(100);
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+			 ETH_ALEN, dev->net->dev_addr);
+	memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+	/* RX bulk configuration */
+	memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+	dev->rx_urb_size = 1024 * 20;
+
+	*tmp = 0x34;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+	*tmp = 0x52;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+			  1, 1, tmp);
+
+	dev->net->netdev_ops = &ax88179_netdev_ops;
+	dev->net->ethtool_ops = &ax88179_ethtool_ops;
+	dev->net->needed_headroom = 8;
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = ax88179_mdio_read;
+	dev->mii.mdio_write = ax88179_mdio_write;
+	dev->mii.phy_id_mask = 0xff;
+	dev->mii.reg_num_mask = 0xff;
+	dev->mii.phy_id = 0x03;
+	dev->mii.supports_gmii = 1;
+
+	dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			      NETIF_F_RXCSUM;
+
+	dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+				 NETIF_F_RXCSUM;
+
+	/* Enable checksum offload */
+	*tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+	       AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+	*tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+	       AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+	/* Configure RX control register => start operation */
+	*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+		 AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+	*tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+	       AX_MONITOR_MODE_RWMP;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+	/* Configure default medium type => giga */
+	*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+		 AX_MEDIUM_GIGAMODE;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, tmp16);
+
+	ax88179_led_setting(dev);
+
+	ax179_data->eee_enabled = 0;
+	ax179_data->eee_active = 0;
+
+	ax88179_disable_eee(dev);
+
+	ax88179_ethtool_get_eee(dev, &eee_data);
+	eee_data.advertised = 0;
+	ax88179_ethtool_set_eee(dev, &eee_data);
+
+	/* Restart autoneg */
+	mii_nway_restart(&dev->mii);
+
+	usbnet_link_change(dev, 0, 0);
+
+	return 0;
+}
+
+static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u16 tmp16;
+
+	/* Configure RX control register => stop operation */
+	tmp16 = AX_RX_CTL_STOP;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+	tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
+
+	/* Power down ethernet PHY */
+	tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+}
+
+static void
+ax88179_rx_checksum(struct sk_buff *skb, u32 *pkt_hdr)
+{
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* checksum error bit is set */
+	if ((*pkt_hdr & AX_RXHDR_L3CSUM_ERR) ||
+	    (*pkt_hdr & AX_RXHDR_L4CSUM_ERR))
+		return;
+
+	/* It must be a TCP or UDP packet with a valid checksum */
+	if (((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_TCP) ||
+	    ((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_UDP))
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct sk_buff *ax_skb;
+	int pkt_cnt;
+	u32 rx_hdr;
+	u16 hdr_off;
+	u32 *pkt_hdr;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	skb_trim(skb, skb->len - 4);
+	memcpy(&rx_hdr, skb_tail_pointer(skb), 4);
+	le32_to_cpus(&rx_hdr);
+
+	pkt_cnt = (u16)rx_hdr;
+	hdr_off = (u16)(rx_hdr >> 16);
+	pkt_hdr = (u32 *)(skb->data + hdr_off);
+
+	while (pkt_cnt--) {
+		u16 pkt_len;
+
+		le32_to_cpus(pkt_hdr);
+		pkt_len = (*pkt_hdr >> 16) & 0x1fff;
+
+		/* Check CRC or runt packet */
+		if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
+		    (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
+			skb_pull(skb, (pkt_len + 7) & 0xFFF8);
+			pkt_hdr++;
+			continue;
+		}
+
+		if (pkt_cnt == 0) {
+			/* Skip IP alignment psudo header */
+			skb_pull(skb, 2);
+			skb->len = pkt_len;
+			skb_set_tail_pointer(skb, pkt_len);
+			skb->truesize = pkt_len + sizeof(struct sk_buff);
+			ax88179_rx_checksum(skb, pkt_hdr);
+			return 1;
+		}
+
+		ax_skb = skb_clone(skb, GFP_ATOMIC);
+		if (ax_skb) {
+			ax_skb->len = pkt_len;
+			ax_skb->data = skb->data + 2;
+			skb_set_tail_pointer(ax_skb, pkt_len);
+			ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
+			ax88179_rx_checksum(ax_skb, pkt_hdr);
+			usbnet_skb_return(dev, ax_skb);
+		} else {
+			return 0;
+		}
+
+		skb_pull(skb, (pkt_len + 7) & 0xFFF8);
+		pkt_hdr++;
+	}
+	return 1;
+}
+
+static struct sk_buff *
+ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	u32 tx_hdr1, tx_hdr2;
+	int frame_size = dev->maxpacket;
+	int mss = skb_shinfo(skb)->gso_size;
+	int headroom;
+
+	tx_hdr1 = skb->len;
+	tx_hdr2 = mss;
+	if (((skb->len + 8) % frame_size) == 0)
+		tx_hdr2 |= 0x80008000;	/* Enable padding */
+
+	headroom = skb_headroom(skb) - 8;
+
+	if ((skb_header_cloned(skb) || headroom < 0) &&
+	    pskb_expand_head(skb, headroom < 0 ? 8 : 0, 0, GFP_ATOMIC)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	skb_push(skb, 4);
+	cpu_to_le32s(&tx_hdr2);
+	skb_copy_to_linear_data(skb, &tx_hdr2, 4);
+
+	skb_push(skb, 4);
+	cpu_to_le32s(&tx_hdr1);
+	skb_copy_to_linear_data(skb, &tx_hdr1, 4);
+
+	return skb;
+}
+
+static int ax88179_link_reset(struct usbnet *dev)
+{
+	struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+	u8 tmp[5], link_sts;
+	u16 mode, tmp16, delay = HZ / 10;
+	u32 tmp32 = 0x40000000;
+	unsigned long jtimeout;
+
+	jtimeout = jiffies + delay;
+	while (tmp32 & 0x40000000) {
+		mode = 0;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &mode);
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2,
+				  &ax179_data->rxctl);
+
+		/*link up, check the usb device control TX FIFO full or empty*/
+		ax88179_read_cmd(dev, 0x81, 0x8c, 0, 4, &tmp32);
+
+		if (time_after(jiffies, jtimeout))
+			return 0;
+	}
+
+	mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+	       AX_MEDIUM_RXFLOW_CTRLEN;
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
+			 1, 1, &link_sts);
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			 GMII_PHY_PHYSR, 2, &tmp16);
+
+	if (!(tmp16 & GMII_PHY_PHYSR_LINK)) {
+		return 0;
+	} else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+		mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ;
+		if (dev->net->mtu > 1500)
+			mode |= AX_MEDIUM_JUMBO_EN;
+
+		if (link_sts & AX_USB_SS)
+			memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+		else if (link_sts & AX_USB_HS)
+			memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
+		else
+			memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+	} else if (GMII_PHY_PHYSR_100 == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+		mode |= AX_MEDIUM_PS;
+
+		if (link_sts & (AX_USB_SS | AX_USB_HS))
+			memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
+		else
+			memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+	} else {
+		memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+	}
+
+	/* RX bulk configuration */
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+	dev->rx_urb_size = (1024 * (tmp[3] + 2));
+
+	if (tmp16 & GMII_PHY_PHYSR_FULL)
+		mode |= AX_MEDIUM_FULL_DUPLEX;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, &mode);
+
+	ax179_data->eee_enabled = ax88179_chk_eee(dev);
+
+	netif_carrier_on(dev->net);
+
+	return 0;
+}
+
+static int ax88179_reset(struct usbnet *dev)
+{
+	u8 buf[5];
+	u16 *tmp16;
+	u8 *tmp;
+	struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+	struct ethtool_eee eee_data;
+
+	tmp16 = (u16 *)buf;
+	tmp = (u8 *)buf;
+
+	/* Power up ethernet PHY */
+	*tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+
+	*tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+	msleep(200);
+
+	*tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+	msleep(100);
+
+	/* Ethernet PHY Auto Detach*/
+	ax88179_auto_detach(dev, 0);
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN,
+			 dev->net->dev_addr);
+	memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+	/* RX bulk configuration */
+	memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+	dev->rx_urb_size = 1024 * 20;
+
+	*tmp = 0x34;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+	*tmp = 0x52;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+			  1, 1, tmp);
+
+	dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			      NETIF_F_RXCSUM;
+
+	dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+				 NETIF_F_RXCSUM;
+
+	/* Enable checksum offload */
+	*tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+	       AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+	*tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+	       AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+	/* Configure RX control register => start operation */
+	*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+		 AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+	*tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+	       AX_MONITOR_MODE_RWMP;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+	/* Configure default medium type => giga */
+	*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+		 AX_MEDIUM_GIGAMODE;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, tmp16);
+
+	ax88179_led_setting(dev);
+
+	ax179_data->eee_enabled = 0;
+	ax179_data->eee_active = 0;
+
+	ax88179_disable_eee(dev);
+
+	ax88179_ethtool_get_eee(dev, &eee_data);
+	eee_data.advertised = 0;
+	ax88179_ethtool_set_eee(dev, &eee_data);
+
+	/* Restart autoneg */
+	mii_nway_restart(&dev->mii);
+
+	usbnet_link_change(dev, 0, 0);
+
+	return 0;
+}
+
+static int ax88179_stop(struct usbnet *dev)
+{
+	u16 tmp16;
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			 2, 2, &tmp16);
+	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, &tmp16);
+
+	return 0;
+}
+
+static const struct driver_info ax88179_info = {
+	.description = "ASIX AX88179 USB 3.0 Gigabit Ethernet",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info ax88178a_info = {
+	.description = "ASIX AX88178A USB 2.0 Gigabit Ethernet",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info dlink_dub1312_info = {
+	.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info sitecom_info = {
+	.description = "Sitecom USB 3.0 to Gigabit Adapter",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info samsung_info = {
+	.description = "Samsung USB Ethernet Adapter",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info lenovo_info = {
+	.description = "Lenovo OneLinkDock Gigabit LAN",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+{
+	/* ASIX AX88179 10/100/1000 */
+	USB_DEVICE(0x0b95, 0x1790),
+	.driver_info = (unsigned long)&ax88179_info,
+}, {
+	/* ASIX AX88178A 10/100/1000 */
+	USB_DEVICE(0x0b95, 0x178a),
+	.driver_info = (unsigned long)&ax88178a_info,
+}, {
+	/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
+	USB_DEVICE(0x2001, 0x4a00),
+	.driver_info = (unsigned long)&dlink_dub1312_info,
+}, {
+	/* Sitecom USB 3.0 to Gigabit Adapter */
+	USB_DEVICE(0x0df6, 0x0072),
+	.driver_info = (unsigned long)&sitecom_info,
+}, {
+	/* Samsung USB Ethernet Adapter */
+	USB_DEVICE(0x04e8, 0xa100),
+	.driver_info = (unsigned long)&samsung_info,
+}, {
+	/* Lenovo OneLinkDock Gigabit LAN */
+	USB_DEVICE(0x17ef, 0x304b),
+	.driver_info = (unsigned long)&lenovo_info,
+},
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver ax88179_178a_driver = {
+	.name =		"ax88179_178a",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.suspend =	ax88179_suspend,
+	.resume =	ax88179_resume,
+	.reset_resume =	ax88179_resume,
+	.disconnect =	usbnet_disconnect,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ax88179_178a_driver);
+
+MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/catc.c backports-4.2.6-1/drivers/net/usb/catc.c
--- backports-4.2.6-1.org/drivers/net/usb/catc.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/catc.c	2016-06-28 14:35:17.975307221 +0200
@@ -0,0 +1,965 @@
+/*
+ *  Copyright (c) 2001 Vojtech Pavlik
+ *
+ *  CATC EL1210A NetMate USB Ethernet driver
+ *
+ *  Sponsored by SuSE
+ *
+ *  Based on the work of
+ *		Donald Becker
+ * 
+ *  Old chipset support added by Simon Evans <spse@secret.org.uk> 2002
+ *    - adds support for Belkin F5U011
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+#include <linux/usb.h>
+
+/*
+ * Version information.
+ */
+
+#define DRIVER_VERSION "v2.8"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
+#define DRIVER_DESC "CATC EL1210A NetMate USB Ethernet driver"
+#define SHORT_DRIVER_DESC "EL1210A NetMate USB Ethernet"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "catc";
+
+/*
+ * Some defines.
+ */ 
+
+#define STATS_UPDATE		(HZ)	/* Time between stats updates */
+#define TX_TIMEOUT		(5*HZ)	/* Max time the queue can be stopped */
+#define PKT_SZ			1536	/* Max Ethernet packet size */
+#define RX_MAX_BURST		15	/* Max packets per rx buffer (> 0, < 16) */
+#define TX_MAX_BURST		15	/* Max full sized packets per tx buffer (> 0) */
+#define CTRL_QUEUE		16	/* Max control requests in flight (power of two) */
+#define RX_PKT_SZ		1600	/* Max size of receive packet for F5U011 */
+
+/*
+ * Control requests.
+ */
+
+enum control_requests {
+	ReadMem =	0xf1,
+	GetMac =	0xf2,
+	Reset =		0xf4,
+	SetMac =	0xf5,
+	SetRxMode =     0xf5,  /* F5U011 only */
+	WriteROM =	0xf8,
+	SetReg =	0xfa,
+	GetReg =	0xfb,
+	WriteMem =	0xfc,
+	ReadROM =	0xfd,
+};
+
+/*
+ * Registers.
+ */
+
+enum register_offsets {
+	TxBufCount =	0x20,
+	RxBufCount =	0x21,
+	OpModes =	0x22,
+	TxQed =		0x23,
+	RxQed =		0x24,
+	MaxBurst =	0x25,
+	RxUnit =	0x60,
+	EthStatus =	0x61,
+	StationAddr0 =	0x67,
+	EthStats =	0x69,
+	LEDCtrl =	0x81,
+};
+
+enum eth_stats {
+	TxSingleColl =	0x00,
+        TxMultiColl =	0x02,
+        TxExcessColl =	0x04,
+        RxFramErr =	0x06,
+};
+
+enum op_mode_bits {
+	Op3MemWaits =	0x03,
+	OpLenInclude =	0x08,
+	OpRxMerge =	0x10,
+	OpTxMerge =	0x20,
+	OpWin95bugfix =	0x40,
+	OpLoopback =	0x80,
+};
+
+enum rx_filter_bits {
+	RxEnable =	0x01,
+	RxPolarity =	0x02,
+	RxForceOK =	0x04,
+	RxMultiCast =	0x08,
+	RxPromisc =	0x10,
+	AltRxPromisc =  0x20, /* F5U011 uses different bit */
+};
+
+enum led_values {
+	LEDFast = 	0x01,
+	LEDSlow =	0x02,
+	LEDFlash =	0x03,
+	LEDPulse =	0x04,
+	LEDLink =	0x08,
+};
+
+enum link_status {
+	LinkNoChange = 0,
+	LinkGood     = 1,
+	LinkBad      = 2
+};
+
+/*
+ * The catc struct.
+ */
+
+#define CTRL_RUNNING	0
+#define RX_RUNNING	1
+#define TX_RUNNING	2
+
+struct catc {
+	struct net_device *netdev;
+	struct usb_device *usbdev;
+
+	unsigned long flags;
+
+	unsigned int tx_ptr, tx_idx;
+	unsigned int ctrl_head, ctrl_tail;
+	spinlock_t tx_lock, ctrl_lock;
+
+	u8 tx_buf[2][TX_MAX_BURST * (PKT_SZ + 2)];
+	u8 rx_buf[RX_MAX_BURST * (PKT_SZ + 2)];
+	u8 irq_buf[2];
+	u8 ctrl_buf[64];
+	struct usb_ctrlrequest ctrl_dr;
+
+	struct timer_list timer;
+	u8 stats_buf[8];
+	u16 stats_vals[4];
+	unsigned long last_stats;
+
+	u8 multicast[64];
+
+	struct ctrl_queue {
+		u8 dir;
+		u8 request;
+		u16 value;
+		u16 index;
+		void *buf;
+		int len;
+		void (*callback)(struct catc *catc, struct ctrl_queue *q);
+	} ctrl_queue[CTRL_QUEUE];
+
+	struct urb *tx_urb, *rx_urb, *irq_urb, *ctrl_urb;
+
+	u8 is_f5u011;	/* Set if device is an F5U011 */
+	u8 rxmode[2];	/* Used for F5U011 */
+	atomic_t recq_sz; /* Used for F5U011 - counter of waiting rx packets */
+};
+
+/*
+ * Useful macros.
+ */
+
+#define catc_get_mac(catc, mac)				catc_ctrl_msg(catc, USB_DIR_IN,  GetMac, 0, 0, mac,  6)
+#define catc_reset(catc)				catc_ctrl_msg(catc, USB_DIR_OUT, Reset, 0, 0, NULL, 0)
+#define catc_set_reg(catc, reg, val)			catc_ctrl_msg(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0)
+#define catc_get_reg(catc, reg, buf)			catc_ctrl_msg(catc, USB_DIR_IN,  GetReg, 0, reg, buf, 1)
+#define catc_write_mem(catc, addr, buf, size)		catc_ctrl_msg(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size)
+#define catc_read_mem(catc, addr, buf, size)		catc_ctrl_msg(catc, USB_DIR_IN,  ReadMem, 0, addr, buf, size)
+
+#define f5u011_rxmode(catc, rxmode)			catc_ctrl_msg(catc, USB_DIR_OUT, SetRxMode, 0, 1, rxmode, 2)
+#define f5u011_rxmode_async(catc, rxmode)		catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 1, &rxmode, 2, NULL)
+#define f5u011_mchash_async(catc, hash)			catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 2, &hash, 8, NULL)
+
+#define catc_set_reg_async(catc, reg, val)		catc_ctrl_async(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0, NULL)
+#define catc_get_reg_async(catc, reg, cb)		catc_ctrl_async(catc, USB_DIR_IN, GetReg, 0, reg, NULL, 1, cb)
+#define catc_write_mem_async(catc, addr, buf, size)	catc_ctrl_async(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size, NULL)
+
+/*
+ * Receive routines.
+ */
+
+static void catc_rx_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	u8 *pkt_start = urb->transfer_buffer;
+	struct sk_buff *skb;
+	int pkt_len, pkt_offset = 0;
+	int status = urb->status;
+
+	if (!catc->is_f5u011) {
+		clear_bit(RX_RUNNING, &catc->flags);
+		pkt_offset = 2;
+	}
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "rx_done, status %d, length %d\n",
+			status, urb->actual_length);
+		return;
+	}
+
+	do {
+		if(!catc->is_f5u011) {
+			pkt_len = le16_to_cpup((__le16*)pkt_start);
+			if (pkt_len > urb->actual_length) {
+				catc->netdev->stats.rx_length_errors++;
+				catc->netdev->stats.rx_errors++;
+				break;
+			}
+		} else {
+			pkt_len = urb->actual_length;
+		}
+
+		if (!(skb = dev_alloc_skb(pkt_len)))
+			return;
+
+		skb_copy_to_linear_data(skb, pkt_start + pkt_offset, pkt_len);
+		skb_put(skb, pkt_len);
+
+		skb->protocol = eth_type_trans(skb, catc->netdev);
+		netif_rx(skb);
+
+		catc->netdev->stats.rx_packets++;
+		catc->netdev->stats.rx_bytes += pkt_len;
+
+		/* F5U011 only does one packet per RX */
+		if (catc->is_f5u011)
+			break;
+		pkt_start += (((pkt_len + 1) >> 6) + 1) << 6;
+
+	} while (pkt_start - (u8 *) urb->transfer_buffer < urb->actual_length);
+
+	if (catc->is_f5u011) {
+		if (atomic_read(&catc->recq_sz)) {
+			int state;
+			atomic_dec(&catc->recq_sz);
+			netdev_dbg(catc->netdev, "getting extra packet\n");
+			urb->dev = catc->usbdev;
+			if ((state = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+				netdev_dbg(catc->netdev,
+					   "submit(rx_urb) status %d\n", state);
+			}
+		} else {
+			clear_bit(RX_RUNNING, &catc->flags);
+		}
+	}
+}
+
+static void catc_irq_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	u8 *data = urb->transfer_buffer;
+	int status = urb->status;
+	unsigned int hasdata = 0, linksts = LinkNoChange;
+	int res;
+
+	if (!catc->is_f5u011) {
+		hasdata = data[1] & 0x80;
+		if (data[1] & 0x40)
+			linksts = LinkGood;
+		else if (data[1] & 0x20)
+			linksts = LinkBad;
+	} else {
+		hasdata = (unsigned int)(be16_to_cpup((__be16*)data) & 0x0fff);
+		if (data[0] == 0x90)
+			linksts = LinkGood;
+		else if (data[0] == 0xA0)
+			linksts = LinkBad;
+	}
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:		/* error */
+		dev_dbg(&urb->dev->dev,
+			"irq_done, status %d, data %02x %02x.\n",
+			status, data[0], data[1]);
+		goto resubmit;
+	}
+
+	if (linksts == LinkGood) {
+		netif_carrier_on(catc->netdev);
+		netdev_dbg(catc->netdev, "link ok\n");
+	}
+
+	if (linksts == LinkBad) {
+		netif_carrier_off(catc->netdev);
+		netdev_dbg(catc->netdev, "link bad\n");
+	}
+
+	if (hasdata) {
+		if (test_and_set_bit(RX_RUNNING, &catc->flags)) {
+			if (catc->is_f5u011)
+				atomic_inc(&catc->recq_sz);
+		} else {
+			catc->rx_urb->dev = catc->usbdev;
+			if ((res = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
+				dev_err(&catc->usbdev->dev,
+					"submit(rx_urb) status %d\n", res);
+			}
+		} 
+	}
+resubmit:
+	res = usb_submit_urb (urb, GFP_ATOMIC);
+	if (res)
+		dev_err(&catc->usbdev->dev,
+			"can't resubmit intr, %s-%s, status %d\n",
+			catc->usbdev->bus->bus_name,
+			catc->usbdev->devpath, res);
+}
+
+/*
+ * Transmit routines.
+ */
+
+static int catc_tx_run(struct catc *catc)
+{
+	int status;
+
+	if (catc->is_f5u011)
+		catc->tx_ptr = (catc->tx_ptr + 63) & ~63;
+
+	catc->tx_urb->transfer_buffer_length = catc->tx_ptr;
+	catc->tx_urb->transfer_buffer = catc->tx_buf[catc->tx_idx];
+	catc->tx_urb->dev = catc->usbdev;
+
+	if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
+		dev_err(&catc->usbdev->dev, "submit(tx_urb), status %d\n",
+			status);
+
+	catc->tx_idx = !catc->tx_idx;
+	catc->tx_ptr = 0;
+
+	catc->netdev->trans_start = jiffies;
+	return status;
+}
+
+static void catc_tx_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	unsigned long flags;
+	int r, status = urb->status;
+
+	if (status == -ECONNRESET) {
+		dev_dbg(&urb->dev->dev, "Tx Reset.\n");
+		urb->status = 0;
+		catc->netdev->trans_start = jiffies;
+		catc->netdev->stats.tx_errors++;
+		clear_bit(TX_RUNNING, &catc->flags);
+		netif_wake_queue(catc->netdev);
+		return;
+	}
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "tx_done, status %d, length %d\n",
+			status, urb->actual_length);
+		return;
+	}
+
+	spin_lock_irqsave(&catc->tx_lock, flags);
+
+	if (catc->tx_ptr) {
+		r = catc_tx_run(catc);
+		if (unlikely(r < 0))
+			clear_bit(TX_RUNNING, &catc->flags);
+	} else {
+		clear_bit(TX_RUNNING, &catc->flags);
+	}
+
+	netif_wake_queue(catc->netdev);
+
+	spin_unlock_irqrestore(&catc->tx_lock, flags);
+}
+
+static netdev_tx_t catc_start_xmit(struct sk_buff *skb,
+					 struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+	unsigned long flags;
+	int r = 0;
+	char *tx_buf;
+
+	spin_lock_irqsave(&catc->tx_lock, flags);
+
+	catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
+	tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
+	if (catc->is_f5u011)
+		*(__be16 *)tx_buf = cpu_to_be16(skb->len);
+	else
+		*(__le16 *)tx_buf = cpu_to_le16(skb->len);
+	skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
+	catc->tx_ptr += skb->len + 2;
+
+	if (!test_and_set_bit(TX_RUNNING, &catc->flags)) {
+		r = catc_tx_run(catc);
+		if (r < 0)
+			clear_bit(TX_RUNNING, &catc->flags);
+	}
+
+	if ((catc->is_f5u011 && catc->tx_ptr) ||
+	    (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
+		netif_stop_queue(netdev);
+
+	spin_unlock_irqrestore(&catc->tx_lock, flags);
+
+	if (r >= 0) {
+		catc->netdev->stats.tx_bytes += skb->len;
+		catc->netdev->stats.tx_packets++;
+	}
+
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static void catc_tx_timeout(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+
+	dev_warn(&netdev->dev, "Transmit timed out.\n");
+	usb_unlink_urb(catc->tx_urb);
+}
+
+/*
+ * Control messages.
+ */
+
+static int catc_ctrl_msg(struct catc *catc, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
+{
+        int retval = usb_control_msg(catc->usbdev,
+		dir ? usb_rcvctrlpipe(catc->usbdev, 0) : usb_sndctrlpipe(catc->usbdev, 0),
+		 request, 0x40 | dir, value, index, buf, len, 1000);
+        return retval < 0 ? retval : 0;
+}
+
+static void catc_ctrl_run(struct catc *catc)
+{
+	struct ctrl_queue *q = catc->ctrl_queue + catc->ctrl_tail;
+	struct usb_device *usbdev = catc->usbdev;
+	struct urb *urb = catc->ctrl_urb;
+	struct usb_ctrlrequest *dr = &catc->ctrl_dr;
+	int status;
+
+	dr->bRequest = q->request;
+	dr->bRequestType = 0x40 | q->dir;
+	dr->wValue = cpu_to_le16(q->value);
+	dr->wIndex = cpu_to_le16(q->index);
+	dr->wLength = cpu_to_le16(q->len);
+
+        urb->pipe = q->dir ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0);
+	urb->transfer_buffer_length = q->len;
+	urb->transfer_buffer = catc->ctrl_buf;
+	urb->setup_packet = (void *) dr;
+	urb->dev = usbdev;
+
+	if (!q->dir && q->buf && q->len)
+		memcpy(catc->ctrl_buf, q->buf, q->len);
+
+	if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC)))
+		dev_err(&catc->usbdev->dev, "submit(ctrl_urb) status %d\n",
+			status);
+}
+
+static void catc_ctrl_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	struct ctrl_queue *q;
+	unsigned long flags;
+	int status = urb->status;
+
+	if (status)
+		dev_dbg(&urb->dev->dev, "ctrl_done, status %d, len %d.\n",
+			status, urb->actual_length);
+
+	spin_lock_irqsave(&catc->ctrl_lock, flags);
+
+	q = catc->ctrl_queue + catc->ctrl_tail;
+
+	if (q->dir) {
+		if (q->buf && q->len)
+			memcpy(q->buf, catc->ctrl_buf, q->len);
+		else
+			q->buf = catc->ctrl_buf;
+	}
+
+	if (q->callback)
+		q->callback(catc, q);
+
+	catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
+
+	if (catc->ctrl_head != catc->ctrl_tail)
+		catc_ctrl_run(catc);
+	else
+		clear_bit(CTRL_RUNNING, &catc->flags);
+
+	spin_unlock_irqrestore(&catc->ctrl_lock, flags);
+}
+
+static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value,
+	u16 index, void *buf, int len, void (*callback)(struct catc *catc, struct ctrl_queue *q))
+{
+	struct ctrl_queue *q;
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&catc->ctrl_lock, flags);
+	
+	q = catc->ctrl_queue + catc->ctrl_head;
+
+	q->dir = dir;
+	q->request = request;
+	q->value = value;
+	q->index = index;
+	q->buf = buf;
+	q->len = len;
+	q->callback = callback;
+
+	catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1);
+
+	if (catc->ctrl_head == catc->ctrl_tail) {
+		dev_err(&catc->usbdev->dev, "ctrl queue full\n");
+		catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
+		retval = -1;
+	}
+
+	if (!test_and_set_bit(CTRL_RUNNING, &catc->flags))
+		catc_ctrl_run(catc);
+
+	spin_unlock_irqrestore(&catc->ctrl_lock, flags);
+
+	return retval;
+}
+
+/*
+ * Statistics.
+ */
+
+static void catc_stats_done(struct catc *catc, struct ctrl_queue *q)
+{
+	int index = q->index - EthStats;
+	u16 data, last;
+
+	catc->stats_buf[index] = *((char *)q->buf);
+
+	if (index & 1)
+		return;
+
+	data = ((u16)catc->stats_buf[index] << 8) | catc->stats_buf[index + 1];
+	last = catc->stats_vals[index >> 1];
+
+	switch (index) {
+		case TxSingleColl:
+		case TxMultiColl:
+			catc->netdev->stats.collisions += data - last;
+			break;
+		case TxExcessColl:
+			catc->netdev->stats.tx_aborted_errors += data - last;
+			catc->netdev->stats.tx_errors += data - last;
+			break;
+		case RxFramErr:
+			catc->netdev->stats.rx_frame_errors += data - last;
+			catc->netdev->stats.rx_errors += data - last;
+			break;
+	}
+
+	catc->stats_vals[index >> 1] = data;
+}
+
+static void catc_stats_timer(unsigned long data)
+{
+	struct catc *catc = (void *) data;
+	int i;
+
+	for (i = 0; i < 8; i++)
+		catc_get_reg_async(catc, EthStats + 7 - i, catc_stats_done);
+
+	mod_timer(&catc->timer, jiffies + STATS_UPDATE);
+}
+
+/*
+ * Receive modes. Broadcast, Multicast, Promisc.
+ */
+
+static void catc_multicast(unsigned char *addr, u8 *multicast)
+{
+	u32 crc;
+
+	crc = ether_crc_le(6, addr);
+	multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
+}
+
+static void catc_set_multicast_list(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+	struct netdev_hw_addr *ha;
+	u8 broadcast[ETH_ALEN];
+	u8 rx = RxEnable | RxPolarity | RxMultiCast;
+
+	eth_broadcast_addr(broadcast);
+	memset(catc->multicast, 0, 64);
+
+	catc_multicast(broadcast, catc->multicast);
+	catc_multicast(netdev->dev_addr, catc->multicast);
+
+	if (netdev->flags & IFF_PROMISC) {
+		memset(catc->multicast, 0xff, 64);
+		rx |= (!catc->is_f5u011) ? RxPromisc : AltRxPromisc;
+	} 
+
+	if (netdev->flags & IFF_ALLMULTI) {
+		memset(catc->multicast, 0xff, 64);
+	} else {
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 crc = ether_crc_le(6, ha->addr);
+			if (!catc->is_f5u011) {
+				catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
+			} else {
+				catc->multicast[7-(crc >> 29)] |= 1 << ((crc >> 26) & 7);
+			}
+		}
+	}
+	if (!catc->is_f5u011) {
+		catc_set_reg_async(catc, RxUnit, rx);
+		catc_write_mem_async(catc, 0xfa80, catc->multicast, 64);
+	} else {
+		f5u011_mchash_async(catc, catc->multicast);
+		if (catc->rxmode[0] != rx) {
+			catc->rxmode[0] = rx;
+			netdev_dbg(catc->netdev,
+				   "Setting RX mode to %2.2X %2.2X\n",
+				   catc->rxmode[0], catc->rxmode[1]);
+			f5u011_rxmode_async(catc, catc->rxmode);
+		}
+	}
+}
+
+static void catc_get_drvinfo(struct net_device *dev,
+			     struct ethtool_drvinfo *info)
+{
+	struct catc *catc = netdev_priv(dev);
+	strlcpy(info->driver, driver_name, sizeof(info->driver));
+	strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	usb_make_path(catc->usbdev, info->bus_info, sizeof(info->bus_info));
+}
+
+static int catc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct catc *catc = netdev_priv(dev);
+	if (!catc->is_f5u011)
+		return -EOPNOTSUPP;
+
+	cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_TP;
+	cmd->advertising = ADVERTISED_10baseT_Half | ADVERTISED_TP;
+	ethtool_cmd_speed_set(cmd, SPEED_10);
+	cmd->duplex = DUPLEX_HALF;
+	cmd->port = PORT_TP; 
+	cmd->phy_address = 0;
+	cmd->transceiver = XCVR_INTERNAL;
+	cmd->autoneg = AUTONEG_DISABLE;
+	cmd->maxtxpkt = 1;
+	cmd->maxrxpkt = 1;
+	return 0;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = catc_get_drvinfo,
+	.get_settings = catc_get_settings,
+	.get_link = ethtool_op_get_link
+};
+
+/*
+ * Open, close.
+ */
+
+static int catc_open(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+	int status;
+
+	catc->irq_urb->dev = catc->usbdev;
+	if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) {
+		dev_err(&catc->usbdev->dev, "submit(irq_urb) status %d\n",
+			status);
+		return -1;
+	}
+
+	netif_start_queue(netdev);
+
+	if (!catc->is_f5u011)
+		mod_timer(&catc->timer, jiffies + STATS_UPDATE);
+
+	return 0;
+}
+
+static int catc_stop(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+
+	netif_stop_queue(netdev);
+
+	if (!catc->is_f5u011)
+		del_timer_sync(&catc->timer);
+
+	usb_kill_urb(catc->rx_urb);
+	usb_kill_urb(catc->tx_urb);
+	usb_kill_urb(catc->irq_urb);
+	usb_kill_urb(catc->ctrl_urb);
+
+	return 0;
+}
+
+static const struct net_device_ops catc_netdev_ops = {
+	.ndo_open		= catc_open,
+	.ndo_stop		= catc_stop,
+	.ndo_start_xmit		= catc_start_xmit,
+
+	.ndo_tx_timeout		= catc_tx_timeout,
+	.ndo_set_rx_mode	= catc_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/*
+ * USB probe, disconnect.
+ */
+
+static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct device *dev = &intf->dev;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct net_device *netdev;
+	struct catc *catc;
+	u8 broadcast[ETH_ALEN];
+	int i, pktsz;
+
+	if (usb_set_interface(usbdev,
+			intf->altsetting->desc.bInterfaceNumber, 1)) {
+		dev_err(dev, "Can't set altsetting 1.\n");
+		return -EIO;
+	}
+
+	netdev = alloc_etherdev(sizeof(struct catc));
+	if (!netdev)
+		return -ENOMEM;
+
+	catc = netdev_priv(netdev);
+
+	netdev->netdev_ops = &catc_netdev_ops;
+	netdev->watchdog_timeo = TX_TIMEOUT;
+	netdev->ethtool_ops = &ops;
+
+	catc->usbdev = usbdev;
+	catc->netdev = netdev;
+
+	spin_lock_init(&catc->tx_lock);
+	spin_lock_init(&catc->ctrl_lock);
+
+	init_timer(&catc->timer);
+	catc->timer.data = (long) catc;
+	catc->timer.function = catc_stats_timer;
+
+	catc->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+	catc->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	catc->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if ((!catc->ctrl_urb) || (!catc->tx_urb) || 
+	    (!catc->rx_urb) || (!catc->irq_urb)) {
+		dev_err(&intf->dev, "No free urbs available.\n");
+		usb_free_urb(catc->ctrl_urb);
+		usb_free_urb(catc->tx_urb);
+		usb_free_urb(catc->rx_urb);
+		usb_free_urb(catc->irq_urb);
+		free_netdev(netdev);
+		return -ENOMEM;
+	}
+
+	/* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
+	if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 && 
+	    le16_to_cpu(usbdev->descriptor.idProduct) == 0xa &&
+	    le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) {
+		dev_dbg(dev, "Testing for f5u011\n");
+		catc->is_f5u011 = 1;		
+		atomic_set(&catc->recq_sz, 0);
+		pktsz = RX_PKT_SZ;
+	} else {
+		pktsz = RX_MAX_BURST * (PKT_SZ + 2);
+	}
+	
+	usb_fill_control_urb(catc->ctrl_urb, usbdev, usb_sndctrlpipe(usbdev, 0),
+		NULL, NULL, 0, catc_ctrl_done, catc);
+
+	usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, 1),
+		NULL, 0, catc_tx_done, catc);
+
+	usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, 1),
+		catc->rx_buf, pktsz, catc_rx_done, catc);
+
+	usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, 2),
+                catc->irq_buf, 2, catc_irq_done, catc, 1);
+
+	if (!catc->is_f5u011) {
+		dev_dbg(dev, "Checking memory size\n");
+
+		i = 0x12345678;
+		catc_write_mem(catc, 0x7a80, &i, 4);
+		i = 0x87654321;	
+		catc_write_mem(catc, 0xfa80, &i, 4);
+		catc_read_mem(catc, 0x7a80, &i, 4);
+	  
+		switch (i) {
+		case 0x12345678:
+			catc_set_reg(catc, TxBufCount, 8);
+			catc_set_reg(catc, RxBufCount, 32);
+			dev_dbg(dev, "64k Memory\n");
+			break;
+		default:
+			dev_warn(&intf->dev,
+				 "Couldn't detect memory size, assuming 32k\n");
+		case 0x87654321:
+			catc_set_reg(catc, TxBufCount, 4);
+			catc_set_reg(catc, RxBufCount, 16);
+			dev_dbg(dev, "32k Memory\n");
+			break;
+		}
+	  
+		dev_dbg(dev, "Getting MAC from SEEROM.\n");
+	  
+		catc_get_mac(catc, netdev->dev_addr);
+		
+		dev_dbg(dev, "Setting MAC into registers.\n");
+	  
+		for (i = 0; i < 6; i++)
+			catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]);
+		
+		dev_dbg(dev, "Filling the multicast list.\n");
+	  
+		eth_broadcast_addr(broadcast);
+		catc_multicast(broadcast, catc->multicast);
+		catc_multicast(netdev->dev_addr, catc->multicast);
+		catc_write_mem(catc, 0xfa80, catc->multicast, 64);
+		
+		dev_dbg(dev, "Clearing error counters.\n");
+		
+		for (i = 0; i < 8; i++)
+			catc_set_reg(catc, EthStats + i, 0);
+		catc->last_stats = jiffies;
+		
+		dev_dbg(dev, "Enabling.\n");
+		
+		catc_set_reg(catc, MaxBurst, RX_MAX_BURST);
+		catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits);
+		catc_set_reg(catc, LEDCtrl, LEDLink);
+		catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast);
+	} else {
+		dev_dbg(dev, "Performing reset\n");
+		catc_reset(catc);
+		catc_get_mac(catc, netdev->dev_addr);
+		
+		dev_dbg(dev, "Setting RX Mode\n");
+		catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast;
+		catc->rxmode[1] = 0;
+		f5u011_rxmode(catc, catc->rxmode);
+	}
+	dev_dbg(dev, "Init done.\n");
+	printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n",
+	       netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
+	       usbdev->bus->bus_name, usbdev->devpath, netdev->dev_addr);
+	usb_set_intfdata(intf, catc);
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	if (register_netdev(netdev) != 0) {
+		usb_set_intfdata(intf, NULL);
+		usb_free_urb(catc->ctrl_urb);
+		usb_free_urb(catc->tx_urb);
+		usb_free_urb(catc->rx_urb);
+		usb_free_urb(catc->irq_urb);
+		free_netdev(netdev);
+		return -EIO;
+	}
+	return 0;
+}
+
+static void catc_disconnect(struct usb_interface *intf)
+{
+	struct catc *catc = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (catc) {
+		unregister_netdev(catc->netdev);
+		usb_free_urb(catc->ctrl_urb);
+		usb_free_urb(catc->tx_urb);
+		usb_free_urb(catc->rx_urb);
+		usb_free_urb(catc->irq_urb);
+		free_netdev(catc->netdev);
+	}
+}
+
+/*
+ * Module functions and tables.
+ */
+
+static struct usb_device_id catc_id_table [] = {
+	{ USB_DEVICE(0x0423, 0xa) },	/* CATC Netmate, Belkin F5U011 */
+	{ USB_DEVICE(0x0423, 0xc) },	/* CATC Netmate II, Belkin F5U111 */
+	{ USB_DEVICE(0x08d1, 0x1) },	/* smartBridges smartNIC */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, catc_id_table);
+
+static struct usb_driver catc_driver = {
+	.name =		driver_name,
+	.probe =	catc_probe,
+	.disconnect =	catc_disconnect,
+	.id_table =	catc_id_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(catc_driver);
diff -Naur backports-4.2.6-1.org/drivers/net/usb/cdc_eem.c backports-4.2.6-1/drivers/net/usb/cdc_eem.c
--- backports-4.2.6-1.org/drivers/net/usb/cdc_eem.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/cdc_eem.c	2016-06-28 14:35:17.975307221 +0200
@@ -0,0 +1,381 @@
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+#include <linux/if_vlan.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD	2		/* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+	dev_kfree_skb(urb->context);
+	usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct urb		*urb;
+	int			status;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		goto fail;
+
+	usb_fill_bulk_urb(urb, dev->udev, dev->out,
+			skb->data, skb->len, eem_linkcmd_complete, skb);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		usb_free_urb(urb);
+fail:
+		dev_kfree_skb(skb);
+		netdev_warn(dev->net, "link cmd failure\n");
+		return;
+	}
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = 0;
+
+	status = usbnet_get_endpoints(dev, intf);
+	if (status < 0) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(driver_of(intf), intf);
+		return status;
+	}
+
+	/* no jumbogram (16K) support for now */
+
+	dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+	return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	struct sk_buff	*skb2 = NULL;
+	u16		len = skb->len;
+	u32		crc = 0;
+	int		padlen = 0;
+
+	/* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+	 * zero, stick two bytes of zero length EEM packet on the end.
+	 * Else the framework would add invalid single byte padding,
+	 * since it can't know whether ZLPs will be handled right by
+	 * all the relevant hardware and software.
+	 */
+	if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+		padlen += 2;
+
+	if (!skb_cloned(skb)) {
+		int	headroom = skb_headroom(skb);
+		int	tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= ETH_FCS_LEN + padlen) &&
+		    (headroom >= EEM_HEAD))
+			goto done;
+
+		if ((headroom + tailroom)
+				> (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+			skb->data = memmove(skb->head +
+					EEM_HEAD,
+					skb->data,
+					skb->len);
+			skb_set_tail_pointer(skb, len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+	if (!skb2)
+		return NULL;
+
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+
+done:
+	/* we don't use the "no Ethernet CRC" option */
+	crc = crc32_le(~0, skb->data, skb->len);
+	crc = ~crc;
+
+	put_unaligned_le32(crc, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (1 == valid Ethernet CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+	/* Bundle a zero length EEM packet if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.  But we
+	 * may have received multiple EEM payloads, or command payloads.
+	 * So we must process _everything_ as if it's a header, except
+	 * maybe the last data payload
+	 *
+	 * REVISIT the framework needs updating so that when we consume
+	 * all payloads (the last or only message was a command, or a
+	 * zero length EEM packet) that is not accounted as an rx_error.
+	 */
+	do {
+		struct sk_buff	*skb2 = NULL;
+		u16		header;
+		u16		len = 0;
+
+		/* incomplete EEM header? */
+		if (skb->len < EEM_HEAD)
+			return 0;
+
+		/*
+		 * EEM packet header format:
+		 * b0..14:	EEM type dependent (Data or Command)
+		 * b15:		bmType
+		 */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HEAD);
+
+		/*
+		 * The bmType bit helps to denote when EEM
+		 * packet is data or command :
+		 *	bmType = 0	: EEM data payload
+		 *	bmType = 1	: EEM (link) command
+		 */
+		if (header & BIT(15)) {
+			u16	bmEEMCmd;
+
+			/*
+			 * EEM (link) command packet:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		bmReserved (must be 0)
+			 * b15:		1 (EEM command)
+			 */
+			if (header & BIT(14)) {
+				netdev_dbg(dev->net, "reserved command %04x\n",
+					   header);
+				continue;
+			}
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+
+			/* Responding to echo requests is mandatory. */
+			case 0:		/* Echo command */
+				len = header & 0x7FF;
+
+				/* bogus command? */
+				if (skb->len < len)
+					return 0;
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					goto next;
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | (1 << 11) | len,
+						skb_push(skb2, 2));
+				eem_linkcmd(dev, skb2);
+				break;
+
+			/*
+			 * Host may choose to ignore hints.
+			 *  - suspend: peripheral ready to suspend
+			 *  - response: suggest N millisec polling
+			 *  - response complete: suggest N sec polling
+			 *
+			 * Suspend is reported and maybe heeded.
+			 */
+			case 2:		/* Suspend hint */
+				usbnet_device_suggests_idle(dev);
+				continue;
+			case 3:		/* Response hint */
+			case 4:		/* Response complete hint */
+				continue;
+
+			/*
+			 * Hosts should never receive host-to-peripheral
+			 * or reserved command codes; or responses to an
+			 * echo command we didn't send.
+			 */
+			case 1:		/* Echo response */
+			case 5:		/* Tickle */
+			default:	/* reserved */
+				netdev_warn(dev->net,
+					    "unexpected link command %d\n",
+					    bmEEMCmd);
+				continue;
+			}
+
+		} else {
+			u32	crc, crc2;
+			int	is_last;
+
+			/* zero length EEM packet? */
+			if (header == 0)
+				continue;
+
+			/*
+			 * EEM data packet header :
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC
+			 * b15:		0 (EEM data)
+			 */
+			len = header & 0x3FFF;
+
+			/* bogus EEM payload? */
+			if (skb->len < len)
+				return 0;
+
+			/* bogus ethernet frame? */
+			if (len < (ETH_HLEN + ETH_FCS_LEN))
+				goto next;
+
+			/*
+			 * Treat the last payload differently: framework
+			 * code expects our "fixup" to have stripped off
+			 * headers, so "skb" is a data packet (or error).
+			 * Else if it's not the last payload, keep "skb"
+			 * for further processing.
+			 */
+			is_last = (len == skb->len);
+			if (is_last)
+				skb2 = skb;
+			else {
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					return 0;
+			}
+
+			/*
+			 * The bmCRC helps to denote when the CRC field in
+			 * the Ethernet frame contains a calculated CRC:
+			 *	bmCRC = 1	: CRC is calculated
+			 *	bmCRC = 0	: CRC = 0xDEADBEEF
+			 */
+			if (header & BIT(14)) {
+				crc = get_unaligned_le32(skb2->data
+						+ len - ETH_FCS_LEN);
+				crc2 = ~crc32_le(~0, skb2->data, skb2->len
+						- ETH_FCS_LEN);
+			} else {
+				crc = get_unaligned_be32(skb2->data
+						+ len - ETH_FCS_LEN);
+				crc2 = 0xdeadbeef;
+			}
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			if (is_last)
+				return crc == crc2;
+
+			if (unlikely(crc != crc2)) {
+				dev->net->stats.rx_errors++;
+				dev_kfree_skb_any(skb2);
+			} else
+				usbnet_skb_return(dev, skb2);
+		}
+
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info eem_info = {
+	.description =	"CDC EEM Device",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
+	.bind =		eem_bind,
+	.rx_fixup =	eem_rx_fixup,
+	.tx_fixup =	eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+			USB_CDC_PROTO_EEM),
+	.driver_info = (unsigned long) &eem_info,
+},
+{
+	/* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+	.name =		"cdc_eem",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(eem_driver);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/cdc-phonet.c backports-4.2.6-1/drivers/net/usb/cdc-phonet.c
--- backports-4.2.6-1.org/drivers/net/usb/cdc-phonet.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/cdc-phonet.c	2016-06-28 14:35:17.975307221 +0200
@@ -0,0 +1,466 @@
+/*
+ * phonet.c -- USB CDC Phonet host driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+#include <linux/phonet.h>
+
+#define PN_MEDIA_USB	0x1B
+
+static const unsigned rxq_size = 17;
+
+struct usbpn_dev {
+	struct net_device	*dev;
+
+	struct usb_interface	*intf, *data_intf;
+	struct usb_device	*usb;
+	unsigned int		tx_pipe, rx_pipe;
+	u8 active_setting;
+	u8 disconnected;
+
+	unsigned		tx_queue;
+	spinlock_t		tx_lock;
+
+	spinlock_t		rx_lock;
+	struct sk_buff		*rx_skb;
+	struct urb		*urbs[0];
+};
+
+static void tx_complete(struct urb *req);
+static void rx_complete(struct urb *req);
+
+/*
+ * Network device callbacks
+ */
+static netdev_tx_t usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	struct urb *req = NULL;
+	unsigned long flags;
+	int err;
+
+	if (skb->protocol != htons(ETH_P_PHONET))
+		goto drop;
+
+	req = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!req)
+		goto drop;
+	usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
+				tx_complete, skb);
+	req->transfer_flags = URB_ZERO_PACKET;
+	err = usb_submit_urb(req, GFP_ATOMIC);
+	if (err) {
+		usb_free_urb(req);
+		goto drop;
+	}
+
+	spin_lock_irqsave(&pnd->tx_lock, flags);
+	pnd->tx_queue++;
+	if (pnd->tx_queue >= dev->tx_queue_len)
+		netif_stop_queue(dev);
+	spin_unlock_irqrestore(&pnd->tx_lock, flags);
+	return NETDEV_TX_OK;
+
+drop:
+	dev_kfree_skb(skb);
+	dev->stats.tx_dropped++;
+	return NETDEV_TX_OK;
+}
+
+static void tx_complete(struct urb *req)
+{
+	struct sk_buff *skb = req->context;
+	struct net_device *dev = skb->dev;
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	int status = req->status;
+
+	switch (status) {
+	case 0:
+		dev->stats.tx_bytes += skb->len;
+		break;
+
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev->stats.tx_aborted_errors++;
+	default:
+		dev->stats.tx_errors++;
+		dev_dbg(&dev->dev, "TX error (%d)\n", status);
+	}
+	dev->stats.tx_packets++;
+
+	spin_lock(&pnd->tx_lock);
+	pnd->tx_queue--;
+	netif_wake_queue(dev);
+	spin_unlock(&pnd->tx_lock);
+
+	dev_kfree_skb_any(skb);
+	usb_free_urb(req);
+}
+
+static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
+{
+	struct net_device *dev = pnd->dev;
+	struct page *page;
+	int err;
+
+	page = __dev_alloc_page(gfp_flags | __GFP_NOMEMALLOC);
+	if (!page)
+		return -ENOMEM;
+
+	usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
+				PAGE_SIZE, rx_complete, dev);
+	req->transfer_flags = 0;
+	err = usb_submit_urb(req, gfp_flags);
+	if (unlikely(err)) {
+		dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
+		put_page(page);
+	}
+	return err;
+}
+
+static void rx_complete(struct urb *req)
+{
+	struct net_device *dev = req->context;
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	struct page *page = virt_to_page(req->transfer_buffer);
+	struct sk_buff *skb;
+	unsigned long flags;
+	int status = req->status;
+
+	switch (status) {
+	case 0:
+		spin_lock_irqsave(&pnd->rx_lock, flags);
+		skb = pnd->rx_skb;
+		if (!skb) {
+			skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
+			if (likely(skb)) {
+				/* Can't use pskb_pull() on page in IRQ */
+				memcpy(skb_put(skb, 1), page_address(page), 1);
+				skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+						page, 1, req->actual_length,
+						PAGE_SIZE);
+				page = NULL;
+			}
+		} else {
+			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+					page, 0, req->actual_length,
+					PAGE_SIZE);
+			page = NULL;
+		}
+		if (req->actual_length < PAGE_SIZE)
+			pnd->rx_skb = NULL; /* Last fragment */
+		else
+			skb = NULL;
+		spin_unlock_irqrestore(&pnd->rx_lock, flags);
+		if (skb) {
+			skb->protocol = htons(ETH_P_PHONET);
+			skb_reset_mac_header(skb);
+			__skb_pull(skb, 1);
+			skb->dev = dev;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += skb->len;
+
+			netif_rx(skb);
+		}
+		goto resubmit;
+
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		req = NULL;
+		break;
+
+	case -EOVERFLOW:
+		dev->stats.rx_over_errors++;
+		dev_dbg(&dev->dev, "RX overflow\n");
+		break;
+
+	case -EILSEQ:
+		dev->stats.rx_crc_errors++;
+		break;
+	}
+
+	dev->stats.rx_errors++;
+resubmit:
+	if (page)
+		put_page(page);
+	if (req)
+		rx_submit(pnd, req, GFP_ATOMIC);
+}
+
+static int usbpn_close(struct net_device *dev);
+
+static int usbpn_open(struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	int err;
+	unsigned i;
+	unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+	err = usb_set_interface(pnd->usb, num, pnd->active_setting);
+	if (err)
+		return err;
+
+	for (i = 0; i < rxq_size; i++) {
+		struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
+
+		if (!req || rx_submit(pnd, req, GFP_KERNEL)) {
+			usb_free_urb(req);
+			usbpn_close(dev);
+			return -ENOMEM;
+		}
+		pnd->urbs[i] = req;
+	}
+
+	netif_wake_queue(dev);
+	return 0;
+}
+
+static int usbpn_close(struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	unsigned i;
+	unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+	netif_stop_queue(dev);
+
+	for (i = 0; i < rxq_size; i++) {
+		struct urb *req = pnd->urbs[i];
+
+		if (!req)
+			continue;
+		usb_kill_urb(req);
+		usb_free_urb(req);
+		pnd->urbs[i] = NULL;
+	}
+
+	return usb_set_interface(pnd->usb, num, !pnd->active_setting);
+}
+
+static int usbpn_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct if_phonet_req *req = (struct if_phonet_req *)ifr;
+
+	switch (cmd) {
+	case SIOCPNGAUTOCONF:
+		req->ifr_phonet_autoconf.device = PN_DEV_PC;
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
+{
+	if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
+		return -EINVAL;
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static const struct net_device_ops usbpn_ops = {
+	.ndo_open	= usbpn_open,
+	.ndo_stop	= usbpn_close,
+	.ndo_start_xmit = usbpn_xmit,
+	.ndo_do_ioctl	= usbpn_ioctl,
+	.ndo_change_mtu = usbpn_set_mtu,
+};
+
+static void usbpn_setup(struct net_device *dev)
+{
+	dev->features		= 0;
+	dev->netdev_ops		= &usbpn_ops,
+	dev->header_ops		= &phonet_header_ops;
+	dev->type		= ARPHRD_PHONET;
+	dev->flags		= IFF_POINTOPOINT | IFF_NOARP;
+	dev->mtu		= PHONET_MAX_MTU;
+	dev->hard_header_len	= 1;
+	dev->dev_addr[0]	= PN_MEDIA_USB;
+	dev->addr_len		= 1;
+	dev->tx_queue_len	= 3;
+
+	dev->destructor		= free_netdev;
+}
+
+/*
+ * USB driver callbacks
+ */
+static struct usb_device_id usbpn_ids[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_INT_CLASS
+			| USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+		.idVendor = 0x0421, /* Nokia */
+		.bInterfaceClass = USB_CLASS_COMM,
+		.bInterfaceSubClass = 0xFE,
+	},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, usbpn_ids);
+
+static struct usb_driver usbpn_driver;
+
+static int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	static const char ifname[] = "usbpn%d";
+	const struct usb_cdc_union_desc *union_header = NULL;
+	const struct usb_host_interface *data_desc;
+	struct usb_interface *data_intf;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct net_device *dev;
+	struct usbpn_dev *pnd;
+	u8 *data;
+	int phonet = 0;
+	int len, err;
+
+	data = intf->altsetting->extra;
+	len = intf->altsetting->extralen;
+	while (len >= 3) {
+		u8 dlen = data[0];
+		if (dlen < 3)
+			return -EINVAL;
+
+		/* bDescriptorType */
+		if (data[1] == USB_DT_CS_INTERFACE) {
+			/* bDescriptorSubType */
+			switch (data[2]) {
+			case USB_CDC_UNION_TYPE:
+				if (union_header || dlen < 5)
+					break;
+				union_header =
+					(struct usb_cdc_union_desc *)data;
+				break;
+			case 0xAB:
+				phonet = 1;
+				break;
+			}
+		}
+		data += dlen;
+		len -= dlen;
+	}
+
+	if (!union_header || !phonet)
+		return -EINVAL;
+
+	data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
+	if (data_intf == NULL)
+		return -ENODEV;
+	/* Data interface has one inactive and one active setting */
+	if (data_intf->num_altsetting != 2)
+		return -EINVAL;
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 0 &&
+	    data_intf->altsetting[1].desc.bNumEndpoints == 2)
+		data_desc = data_intf->altsetting + 1;
+	else
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 2 &&
+	    data_intf->altsetting[1].desc.bNumEndpoints == 0)
+		data_desc = data_intf->altsetting;
+	else
+		return -EINVAL;
+
+	dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
+			   ifname, NET_NAME_UNKNOWN, usbpn_setup);
+	if (!dev)
+		return -ENOMEM;
+
+	pnd = netdev_priv(dev);
+	SET_NETDEV_DEV(dev, &intf->dev);
+
+	pnd->dev = dev;
+	pnd->usb = usbdev;
+	pnd->intf = intf;
+	pnd->data_intf = data_intf;
+	spin_lock_init(&pnd->tx_lock);
+	spin_lock_init(&pnd->rx_lock);
+	/* Endpoints */
+	if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
+		pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+			data_desc->endpoint[0].desc.bEndpointAddress);
+		pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+			data_desc->endpoint[1].desc.bEndpointAddress);
+	} else {
+		pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+			data_desc->endpoint[1].desc.bEndpointAddress);
+		pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+			data_desc->endpoint[0].desc.bEndpointAddress);
+	}
+	pnd->active_setting = data_desc - data_intf->altsetting;
+
+	err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
+	if (err)
+		goto out;
+
+	/* Force inactive mode until the network device is brought UP */
+	usb_set_interface(usbdev, union_header->bSlaveInterface0,
+				!pnd->active_setting);
+	usb_set_intfdata(intf, pnd);
+
+	err = register_netdev(dev);
+	if (err) {
+		usb_driver_release_interface(&usbpn_driver, data_intf);
+		goto out;
+	}
+
+	dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
+	return 0;
+
+out:
+	usb_set_intfdata(intf, NULL);
+	free_netdev(dev);
+	return err;
+}
+
+static void usbpn_disconnect(struct usb_interface *intf)
+{
+	struct usbpn_dev *pnd = usb_get_intfdata(intf);
+
+	if (pnd->disconnected)
+		return;
+
+	pnd->disconnected = 1;
+	usb_driver_release_interface(&usbpn_driver,
+			(pnd->intf == intf) ? pnd->data_intf : pnd->intf);
+	unregister_netdev(pnd->dev);
+}
+
+static struct usb_driver usbpn_driver = {
+	.name =		"cdc_phonet",
+	.probe =	usbpn_probe,
+	.disconnect =	usbpn_disconnect,
+	.id_table =	usbpn_ids,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(usbpn_driver);
+
+MODULE_AUTHOR("Remi Denis-Courmont");
+MODULE_DESCRIPTION("USB CDC Phonet host interface");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/cdc_subset.c backports-4.2.6-1/drivers/net/usb/cdc_subset.c
--- backports-4.2.6-1.org/drivers/net/usb/cdc_subset.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/cdc_subset.c	2016-06-28 14:35:17.975307221 +0200
@@ -0,0 +1,369 @@
+/*
+ * Simple "CDC Subset" USB Networking Links
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This supports simple USB network links that don't require any special
+ * framing or hardware control operations.  The protocol used here is a
+ * strict subset of CDC Ethernet, with three basic differences reflecting
+ * the goal that almost any hardware should run it:
+ *
+ *  - Minimal runtime control:  one interface, no altsettings, and
+ *    no vendor or class specific control requests.  If a device is
+ *    configured, it is allowed to exchange packets with the host.
+ *    Fancier models would mean not working on some hardware.
+ *
+ *  - Minimal manufacturing control:  no IEEE "Organizationally
+ *    Unique ID" required, or an EEPROMs to store one.  Each host uses
+ *    one random "locally assigned" Ethernet address instead, which can
+ *    of course be overridden using standard tools like "ifconfig".
+ *    (With 2^46 such addresses, same-net collisions are quite rare.)
+ *
+ *  - There is no additional framing data for USB.  Packets are written
+ *    exactly as in CDC Ethernet, starting with an Ethernet header and
+ *    terminated by a short packet.  However, the host will never send a
+ *    zero length packet; some systems can't handle those robustly.
+ *
+ * Anything that can transmit and receive USB bulk packets can implement
+ * this protocol.  That includes both smart peripherals and quite a lot
+ * of "host-to-host" USB cables (which embed two devices back-to-back).
+ *
+ * Note that although Linux may use many of those host-to-host links
+ * with this "cdc_subset" framing, that doesn't mean there may not be a
+ * better approach.  Handling the "other end unplugs/replugs" scenario
+ * well tends to require chip-specific vendor requests.  Also, Windows
+ * peers at the other end of host-to-host cables may expect their own
+ * framing to be used rather than this "cdc_subset" model.
+ */
+
+#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+	return 0;
+}
+#endif
+
+#ifdef	CONFIG_USB_ALI_M5632
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * ALi M5632 driver ... does high speed
+ *
+ * NOTE that the MS-Windows drivers for this chip use some funky and
+ * (naturally) undocumented 7-byte prefix to each packet, so this is a
+ * case where we don't currently interoperate.  Also, once you unplug
+ * one end of the cable, you need to replug the other end too ... since
+ * chip docs are unavailable, there's no way to reset the relevant state
+ * short of a power cycle.
+ *
+ *-------------------------------------------------------------------------*/
+
+static void m5632_recover(struct usbnet *dev)
+{
+	struct usb_device	*udev = dev->udev;
+	struct usb_interface	*intf = dev->intf;
+	int r;
+
+	r = usb_lock_device_for_reset(udev, intf);
+	if (r < 0)
+		return;
+
+	usb_reset_device(udev);
+	usb_unlock_device(udev);
+}
+
+static const struct driver_info	ali_m5632_info = {
+	.description =	"ALi M5632",
+	.flags       = FLAG_POINTTOPOINT,
+	.recover     = m5632_recover,
+};
+
+#endif
+
+#ifdef	CONFIG_USB_AN2720
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * AnchorChips 2720 driver ... http://www.cypress.com
+ *
+ * This doesn't seem to have a way to detect whether the peer is
+ * connected, or need any reset handshaking.  It's got pretty big
+ * internal buffers (handles most of a frame's worth of data).
+ * Chip data sheets don't describe any vendor control messages.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	an2720_info = {
+	.description =	"AnchorChips/Cypress 2720",
+	.flags       = FLAG_POINTTOPOINT,
+	// no reset available!
+	// no check_connect available!
+
+	.in = 2, .out = 2,		// direction distinguishes these
+};
+
+#endif	/* CONFIG_USB_AN2720 */
+
+\f
+#ifdef	CONFIG_USB_BELKIN
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
+ *
+ * ... also two eTEK designs, including one sold as "Advance USBNET"
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	belkin_info = {
+	.description =	"Belkin, eTEK, or compatible",
+	.flags       = FLAG_POINTTOPOINT,
+};
+
+#endif	/* CONFIG_USB_BELKIN */
+
+
+\f
+#ifdef	CONFIG_USB_EPSON2888
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * EPSON USB clients
+ *
+ * This is the same idea as Linux PDAs (below) except the firmware in the
+ * device might not be Tux-powered.  Epson provides reference firmware that
+ * implements this interface.  Product developers can reuse or modify that
+ * code, such as by using their own product and vendor codes.
+ *
+ * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	epson2888_info = {
+	.description =	"Epson USB Device",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+
+	.in = 4, .out = 3,
+};
+
+#endif	/* CONFIG_USB_EPSON2888 */
+
+\f
+/*-------------------------------------------------------------------------
+ *
+ * info from Jonathan McDowell <noodles@earth.li>
+ *
+ *-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_KC2190
+#define HAVE_HARDWARE
+static const struct driver_info kc2190_info = {
+	.description =  "KC Technology KC-190",
+	.flags = FLAG_POINTTOPOINT,
+};
+#endif /* CONFIG_USB_KC2190 */
+
+\f
+#ifdef	CONFIG_USB_ARMLINUX
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Intel's SA-1100 chip integrates basic USB support, and is used
+ * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
+ * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
+ * network using minimal USB framing data.
+ *
+ * This describes the driver currently in standard ARM Linux kernels.
+ * The Zaurus uses a different driver (see later).
+ *
+ * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
+ * and different USB endpoint numbering than the SA1100 devices.  The
+ * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
+ * so we rely on the endpoint descriptors.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	linuxdev_info = {
+	.description =	"Linux Device",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+};
+
+static const struct driver_info	yopy_info = {
+	.description =	"Yopy",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+};
+
+static const struct driver_info	blob_info = {
+	.description =	"Boot Loader OBject",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+};
+
+#endif	/* CONFIG_USB_ARMLINUX */
+
+\f
+/*-------------------------------------------------------------------------*/
+
+#ifndef	HAVE_HARDWARE
+#warning You need to configure some hardware for this driver
+#endif
+
+/*
+ * chip vendor names won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id	products [] = {
+
+#ifdef	CONFIG_USB_ALI_M5632
+{
+	USB_DEVICE (0x0402, 0x5632),	// ALi defaults
+	.driver_info =	(unsigned long) &ali_m5632_info,
+},
+{
+	USB_DEVICE (0x182d,0x207c),	// SiteCom CN-124
+	.driver_info =	(unsigned long) &ali_m5632_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_AN2720
+{
+	USB_DEVICE (0x0547, 0x2720),	// AnchorChips defaults
+	.driver_info =	(unsigned long) &an2720_info,
+}, {
+	USB_DEVICE (0x0547, 0x2727),	// Xircom PGUNET
+	.driver_info =	(unsigned long) &an2720_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_BELKIN
+{
+	USB_DEVICE (0x050d, 0x0004),	// Belkin
+	.driver_info =	(unsigned long) &belkin_info,
+}, {
+	USB_DEVICE (0x056c, 0x8100),	// eTEK
+	.driver_info =	(unsigned long) &belkin_info,
+}, {
+	USB_DEVICE (0x0525, 0x9901),	// Advance USBNET (eTEK)
+	.driver_info =	(unsigned long) &belkin_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_EPSON2888
+{
+	USB_DEVICE (0x0525, 0x2888),	// EPSON USB client
+	.driver_info	= (unsigned long) &epson2888_info,
+},
+#endif
+
+#ifdef CONFIG_USB_KC2190
+{
+	USB_DEVICE (0x050f, 0x0190),	// KC-190
+	.driver_info =	(unsigned long) &kc2190_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_ARMLINUX
+/*
+ * SA-1100 using standard ARM Linux kernels, or compatible.
+ * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
+ * The sa-1100 "usb-eth" driver handles the basic framing.
+ *
+ * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
+ * the sa1100 one, but hardware uses different endpoint numbers.
+ *
+ * Or the Linux "Ethernet" gadget on hardware that can't talk
+ * CDC Ethernet (e.g., no altsettings), in either of two modes:
+ *  - acting just like the old "usb-eth" firmware, though
+ *    the implementation is different
+ *  - supporting RNDIS as the first/default configuration for
+ *    MS-Windows interop; Linux needs to use the other config
+ */
+{
+	// 1183 = 0x049F, both used as hex values?
+	// Compaq "Itsy" vendor/product id
+	USB_DEVICE (0x049F, 0x505A),	// usb-eth, or compatible
+	.driver_info =	(unsigned long) &linuxdev_info,
+}, {
+	USB_DEVICE (0x0E7E, 0x1001),	// G.Mate "Yopy"
+	.driver_info =	(unsigned long) &yopy_info,
+}, {
+	USB_DEVICE (0x8086, 0x07d3),	// "blob" bootloader
+	.driver_info =	(unsigned long) &blob_info,
+}, {
+	USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
+	.driver_info =  (unsigned long) &blob_info,
+}, {
+	// Linux Ethernet/RNDIS gadget, mostly on PXA, second config
+	// e.g. Gumstix, current OpenZaurus, ... or anything else
+	// that just enables this gadget option.
+	USB_DEVICE (0x0525, 0xa4a2),
+	.driver_info =	(unsigned long) &linuxdev_info,
+},
+#endif
+
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+/*-------------------------------------------------------------------------*/
+static int dummy_prereset(struct usb_interface *intf)
+{
+        return 0;
+}
+
+static int dummy_postreset(struct usb_interface *intf)
+{
+        return 0;
+}
+
+static struct usb_driver cdc_subset_driver = {
+	.name =		"cdc_subset",
+	.probe =	usbnet_probe,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.pre_reset =	dummy_prereset,
+	.post_reset =	dummy_postreset,
+	.disconnect =	usbnet_disconnect,
+	.id_table =	products,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cdc_subset_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/cx82310_eth.c backports-4.2.6-1/drivers/net/usb/cx82310_eth.c
--- backports-4.2.6-1.org/drivers/net/usb/cx82310_eth.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/cx82310_eth.c	2016-06-28 14:35:17.978640554 +0200
@@ -0,0 +1,353 @@
+/*
+ * Driver for USB ethernet port of Conexant CX82310-based ADSL routers
+ * Copyright (C) 2010 by Ondrej Zary
+ * some parts inspired by the cxacru driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+enum cx82310_cmd {
+	CMD_START		= 0x84,	/* no effect? */
+	CMD_STOP		= 0x85,	/* no effect? */
+	CMD_GET_STATUS		= 0x90,	/* returns nothing? */
+	CMD_GET_MAC_ADDR	= 0x91,	/* read MAC address */
+	CMD_GET_LINK_STATUS	= 0x92,	/* not useful, link is always up */
+	CMD_ETHERNET_MODE	= 0x99,	/* unknown, needed during init */
+};
+
+enum cx82310_status {
+	STATUS_UNDEFINED,
+	STATUS_SUCCESS,
+	STATUS_ERROR,
+	STATUS_UNSUPPORTED,
+	STATUS_UNIMPLEMENTED,
+	STATUS_PARAMETER_ERROR,
+	STATUS_DBG_LOOPBACK,
+};
+
+#define CMD_PACKET_SIZE	64
+#define CMD_TIMEOUT	100
+#define CMD_REPLY_RETRY 5
+
+#define CX82310_MTU	1514
+#define CMD_EP		0x01
+
+/*
+ * execute control command
+ *  - optionally send some data (command parameters)
+ *  - optionally wait for the reply
+ *  - optionally read some data from the reply
+ */
+static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply,
+		       u8 *wdata, int wlen, u8 *rdata, int rlen)
+{
+	int actual_len, retries, ret;
+	struct usb_device *udev = dev->udev;
+	u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
+	/* create command packet */
+	buf[0] = cmd;
+	if (wdata)
+		memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4));
+
+	/* send command packet */
+	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf,
+			   CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT);
+	if (ret < 0) {
+		if (cmd != CMD_GET_LINK_STATUS)
+			dev_err(&dev->udev->dev, "send command %#x: error %d\n",
+				cmd, ret);
+		goto end;
+	}
+
+	if (reply) {
+		/* wait for reply, retry if it's empty */
+		for (retries = 0; retries < CMD_REPLY_RETRY; retries++) {
+			ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP),
+					   buf, CMD_PACKET_SIZE, &actual_len,
+					   CMD_TIMEOUT);
+			if (ret < 0) {
+				if (cmd != CMD_GET_LINK_STATUS)
+					dev_err(&dev->udev->dev,
+						"reply receive error %d\n",
+						ret);
+				goto end;
+			}
+			if (actual_len > 0)
+				break;
+		}
+		if (actual_len == 0) {
+			dev_err(&dev->udev->dev, "no reply to command %#x\n",
+				cmd);
+			ret = -EIO;
+			goto end;
+		}
+		if (buf[0] != cmd) {
+			dev_err(&dev->udev->dev,
+				"got reply to command %#x, expected: %#x\n",
+				buf[0], cmd);
+			ret = -EIO;
+			goto end;
+		}
+		if (buf[1] != STATUS_SUCCESS) {
+			dev_err(&dev->udev->dev, "command %#x failed: %#x\n",
+				cmd, buf[1]);
+			ret = -EIO;
+			goto end;
+		}
+		if (rdata)
+			memcpy(rdata, buf + 4,
+			       min_t(int, rlen, CMD_PACKET_SIZE - 4));
+	}
+end:
+	kfree(buf);
+	return ret;
+}
+
+#define partial_len	data[0]		/* length of partial packet data */
+#define partial_rem	data[1]		/* remaining (missing) data length */
+#define partial_data	data[2]		/* partial packet data */
+
+static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	char buf[15];
+	struct usb_device *udev = dev->udev;
+	u8 link[3];
+	int timeout = 50;
+
+	/* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
+	if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
+	    && strcmp(buf, "USB NET CARD")) {
+		dev_info(&udev->dev, "ignoring: probably an ADSL modem\n");
+		return -ENODEV;
+	}
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		return ret;
+
+	/*
+	 * this must not include ethernet header as the device can send partial
+	 * packets with no header (and sometimes even empty URBs)
+	 */
+	dev->net->hard_header_len = 0;
+	/* we can send at most 1514 bytes of data (+ 2-byte header) per URB */
+	dev->hard_mtu = CX82310_MTU + 2;
+	/* we can receive URBs up to 4KB from the device */
+	dev->rx_urb_size = 4096;
+
+	dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL);
+	if (!dev->partial_data)
+		return -ENOMEM;
+
+	/* wait for firmware to become ready (indicated by the link being up) */
+	while (--timeout) {
+		ret = cx82310_cmd(dev, CMD_GET_LINK_STATUS, true, NULL, 0,
+				  link, sizeof(link));
+		/* the command can time out during boot - it's not an error */
+		if (!ret && link[0] == 1 && link[2] == 1)
+			break;
+		msleep(500);
+	}
+	if (!timeout) {
+		dev_err(&udev->dev, "firmware not ready in time\n");
+		return -ETIMEDOUT;
+	}
+
+	/* enable ethernet mode (?) */
+	ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0);
+	if (ret) {
+		dev_err(&udev->dev, "unable to enable ethernet mode: %d\n",
+			ret);
+		goto err;
+	}
+
+	/* get the MAC address */
+	ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0,
+			  dev->net->dev_addr, ETH_ALEN);
+	if (ret) {
+		dev_err(&udev->dev, "unable to read MAC address: %d\n", ret);
+		goto err;
+	}
+
+	/* start (does not seem to have any effect?) */
+	ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	kfree((void *)dev->partial_data);
+	return ret;
+}
+
+static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	kfree((void *)dev->partial_data);
+}
+
+/*
+ * RX is NOT easy - we can receive multiple packets per skb, each having 2-byte
+ * packet length at the beginning.
+ * The last packet might be incomplete (when it crosses the 4KB URB size),
+ * continuing in the next skb (without any headers).
+ * If a packet has odd length, there is one extra byte at the end (before next
+ * packet or at the end of the URB).
+ */
+static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+	struct sk_buff *skb2;
+
+	/*
+	 * If the last skb ended with an incomplete packet, this skb contains
+	 * end of that packet at the beginning.
+	 */
+	if (dev->partial_rem) {
+		len = dev->partial_len + dev->partial_rem;
+		skb2 = alloc_skb(len, GFP_ATOMIC);
+		if (!skb2)
+			return 0;
+		skb_put(skb2, len);
+		memcpy(skb2->data, (void *)dev->partial_data,
+		       dev->partial_len);
+		memcpy(skb2->data + dev->partial_len, skb->data,
+		       dev->partial_rem);
+		usbnet_skb_return(dev, skb2);
+		skb_pull(skb, (dev->partial_rem + 1) & ~1);
+		dev->partial_rem = 0;
+		if (skb->len < 2)
+			return 1;
+	}
+
+	/* a skb can contain multiple packets */
+	while (skb->len > 1) {
+		/* first two bytes are packet length */
+		len = skb->data[0] | (skb->data[1] << 8);
+		skb_pull(skb, 2);
+
+		/* if last packet in the skb, let usbnet to process it */
+		if (len == skb->len || len + 1 == skb->len) {
+			skb_trim(skb, len);
+			break;
+		}
+
+		if (len > CX82310_MTU) {
+			dev_err(&dev->udev->dev, "RX packet too long: %d B\n",
+				len);
+			return 0;
+		}
+
+		/* incomplete packet, save it for the next skb */
+		if (len > skb->len) {
+			dev->partial_len = skb->len;
+			dev->partial_rem = len - skb->len;
+			memcpy((void *)dev->partial_data, skb->data,
+			       dev->partial_len);
+			skb_pull(skb, skb->len);
+			break;
+		}
+
+		skb2 = alloc_skb(len, GFP_ATOMIC);
+		if (!skb2)
+			return 0;
+		skb_put(skb2, len);
+		memcpy(skb2->data, skb->data, len);
+		/* process the packet */
+		usbnet_skb_return(dev, skb2);
+
+		skb_pull(skb, (len + 1) & ~1);
+	}
+
+	/* let usbnet process the last packet */
+	return 1;
+}
+
+/* TX is easy, just add 2 bytes of length at the beginning */
+static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len = skb->len;
+
+	if (skb_headroom(skb) < 2) {
+		struct sk_buff *skb2 = skb_copy_expand(skb, 2, 0, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+	skb_push(skb, 2);
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+
+static const struct driver_info	cx82310_info = {
+	.description	= "Conexant CX82310 USB ethernet",
+	.flags		= FLAG_ETHER,
+	.bind		= cx82310_bind,
+	.unbind		= cx82310_unbind,
+	.rx_fixup	= cx82310_rx_fixup,
+	.tx_fixup	= cx82310_tx_fixup,
+};
+
+#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_DEV_INFO, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bDeviceClass = (cl), \
+	.bDeviceSubClass = (sc), \
+	.bDeviceProtocol = (pr)
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0),
+		.driver_info = (unsigned long) &cx82310_info
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cx82310_driver = {
+	.name		= "cx82310_eth",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cx82310_driver);
+
+MODULE_AUTHOR("Ondrej Zary");
+MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/dm9601.c backports-4.2.6-1/drivers/net/usb/dm9601.c
--- backports-4.2.6-1.org/drivers/net/usb/dm9601.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/dm9601.c	2016-06-28 14:35:17.978640554 +0200
@@ -0,0 +1,647 @@
+/*
+ * Davicom DM96xx USB 10/100Mbps ethernet devices
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+//#define DEBUG
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+
+/* datasheet:
+ http://ptm2.cc.utu.fi/ftp/network/cards/DM9601/From_NET/DM9601-DS-P01-930914.pdf
+*/
+
+/* control requests */
+#define DM_READ_REGS	0x00
+#define DM_WRITE_REGS	0x01
+#define DM_READ_MEMS	0x02
+#define DM_WRITE_REG	0x03
+#define DM_WRITE_MEMS	0x05
+#define DM_WRITE_MEM	0x07
+
+/* registers */
+#define DM_NET_CTRL	0x00
+#define DM_RX_CTRL	0x05
+#define DM_SHARED_CTRL	0x0b
+#define DM_SHARED_ADDR	0x0c
+#define DM_SHARED_DATA	0x0d	/* low + high */
+#define DM_PHY_ADDR	0x10	/* 6 bytes */
+#define DM_MCAST_ADDR	0x16	/* 8 bytes */
+#define DM_GPR_CTRL	0x1e
+#define DM_GPR_DATA	0x1f
+#define DM_CHIP_ID	0x2c
+#define DM_MODE_CTRL	0x91	/* only on dm9620 */
+
+/* chip id values */
+#define ID_DM9601	0
+#define ID_DM9620	1
+
+#define DM_MAX_MCAST	64
+#define DM_MCAST_SIZE	8
+#define DM_EEPROM_LEN	256
+#define DM_TX_OVERHEAD	2	/* 2 byte header */
+#define DM_RX_OVERHEAD	7	/* 3 byte header + 4 byte crc tail */
+#define DM_TIMEOUT	1000
+
+static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+	err = usbnet_read_cmd(dev, DM_READ_REGS,
+			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       0, reg, data, length);
+	if(err != length && err >= 0)
+		err = -EINVAL;
+	return err;
+}
+
+static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+	return dm_read(dev, reg, 1, value);
+}
+
+static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+	err = usbnet_write_cmd(dev, DM_WRITE_REGS,
+				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				0, reg, data, length);
+
+	if (err >= 0 && err < length)
+		err = -EINVAL;
+	return err;
+}
+
+static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+	return usbnet_write_cmd(dev, DM_WRITE_REG,
+				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				value, reg, NULL, 0);
+}
+
+static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	usbnet_write_cmd_async(dev, DM_WRITE_REGS,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       0, reg, data, length);
+}
+
+static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+	usbnet_write_cmd_async(dev, DM_WRITE_REG,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       value, reg, NULL, 0);
+}
+
+static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *value)
+{
+	int ret, i;
+
+	mutex_lock(&dev->phy_mutex);
+
+	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
+
+	for (i = 0; i < DM_TIMEOUT; i++) {
+		u8 tmp = 0;
+
+		udelay(1);
+		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+		if (ret < 0)
+			goto out;
+
+		/* ready */
+		if ((tmp & 1) == 0)
+			break;
+	}
+
+	if (i == DM_TIMEOUT) {
+		netdev_err(dev->net, "%s read timed out!\n", phy ? "phy" : "eeprom");
+		ret = -EIO;
+		goto out;
+	}
+
+	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+	ret = dm_read(dev, DM_SHARED_DATA, 2, value);
+
+	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+		   phy, reg, *value, ret);
+
+ out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 value)
+{
+	int ret, i;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
+	if (ret < 0)
+		goto out;
+
+	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
+
+	for (i = 0; i < DM_TIMEOUT; i++) {
+		u8 tmp = 0;
+
+		udelay(1);
+		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+		if (ret < 0)
+			goto out;
+
+		/* ready */
+		if ((tmp & 1) == 0)
+			break;
+	}
+
+	if (i == DM_TIMEOUT) {
+		netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
+		ret = -EIO;
+		goto out;
+	}
+
+	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+
+out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+	return dm_read_shared_word(dev, 0, offset, value);
+}
+
+
+
+static int dm9601_get_eeprom_len(struct net_device *dev)
+{
+	return DM_EEPROM_LEN;
+}
+
+static int dm9601_get_eeprom(struct net_device *net,
+			     struct ethtool_eeprom *eeprom, u8 * data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 *ebuf = (__le16 *) data;
+	int i;
+
+	/* access is 16bit */
+	if ((eeprom->offset % 2) || (eeprom->len % 2))
+		return -EINVAL;
+
+	for (i = 0; i < eeprom->len / 2; i++) {
+		if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
+					&ebuf[i]) < 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	__le16 res;
+
+	if (phy_id) {
+		netdev_dbg(dev->net, "Only internal phy supported\n");
+		return 0;
+	}
+
+	dm_read_shared_word(dev, 1, loc, &res);
+
+	netdev_dbg(dev->net,
+		   "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			      int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	if (phy_id) {
+		netdev_dbg(dev->net, "Only internal phy supported\n");
+		return;
+	}
+
+	netdev_dbg(dev->net, "dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+
+	dm_write_shared_word(dev, 1, loc, res);
+}
+
+static void dm9601_get_drvinfo(struct net_device *net,
+			       struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	info->eedump_len = DM_EEPROM_LEN;
+}
+
+static u32 dm9601_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops dm9601_ethtool_ops = {
+	.get_drvinfo	= dm9601_get_drvinfo,
+	.get_link	= dm9601_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= dm9601_get_eeprom_len,
+	.get_eeprom	= dm9601_get_eeprom,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.nway_reset	= usbnet_nway_reset,
+};
+
+static void dm9601_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	/* We use the 20 byte dev->data for our 8 byte filter buffer
+	 * to avoid allocating memory that is tricky to free later */
+	u8 *hashes = (u8 *) & dev->data;
+	u8 rx_ctl = 0x31;
+
+	memset(hashes, 0x00, DM_MCAST_SIZE);
+	hashes[DM_MCAST_SIZE - 1] |= 0x80;	/* broadcast address */
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= 0x02;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > DM_MAX_MCAST) {
+		rx_ctl |= 0x08;
+	} else if (!netdev_mc_empty(net)) {
+		struct netdev_hw_addr *ha;
+
+		netdev_for_each_mc_addr(ha, net) {
+			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			hashes[crc >> 3] |= 1 << (crc & 0x7);
+		}
+	}
+
+	dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
+	dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
+}
+
+static void __dm9601_set_mac_address(struct usbnet *dev)
+{
+	dm_write_async(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
+}
+
+static int dm9601_set_mac_address(struct net_device *net, void *p)
+{
+	struct sockaddr *addr = p;
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!is_valid_ether_addr(addr->sa_data)) {
+		dev_err(&net->dev, "not setting invalid mac address %pM\n",
+								addr->sa_data);
+		return -EINVAL;
+	}
+
+	memcpy(net->dev_addr, addr->sa_data, net->addr_len);
+	__dm9601_set_mac_address(dev);
+
+	return 0;
+}
+
+static const struct net_device_ops dm9601_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl 		= dm9601_ioctl,
+	.ndo_set_rx_mode	= dm9601_set_multicast,
+	.ndo_set_mac_address	= dm9601_set_mac_address,
+};
+
+static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 mac[ETH_ALEN], id;
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
+
+	dev->net->netdev_ops = &dm9601_netdev_ops;
+	dev->net->ethtool_ops = &dm9601_ethtool_ops;
+	dev->net->hard_header_len += DM_TX_OVERHEAD;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+	/* dm9620/21a require room for 4 byte padding, even in dm9601
+	 * mode, so we need +1 to be able to receive full size
+	 * ethernet frames.
+	 */
+	dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD + 1;
+
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = dm9601_mdio_read;
+	dev->mii.mdio_write = dm9601_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+
+	/* reset */
+	dm_write_reg(dev, DM_NET_CTRL, 1);
+	udelay(20);
+
+	/* read MAC */
+	if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, mac) < 0) {
+		printk(KERN_ERR "Error reading MAC address\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/*
+	 * Overwrite the auto-generated address only with good ones.
+	 */
+	if (is_valid_ether_addr(mac))
+		memcpy(dev->net->dev_addr, mac, ETH_ALEN);
+	else {
+		printk(KERN_WARNING
+			"dm9601: No valid MAC address in EEPROM, using %pM\n",
+			dev->net->dev_addr);
+		__dm9601_set_mac_address(dev);
+	}
+
+	if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) {
+		netdev_err(dev->net, "Error reading chip ID\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* put dm9620 devices in dm9601 mode */
+	if (id == ID_DM9620) {
+		u8 mode;
+
+		if (dm_read_reg(dev, DM_MODE_CTRL, &mode) < 0) {
+			netdev_err(dev->net, "Error reading MODE_CTRL\n");
+			ret = -ENODEV;
+			goto out;
+		}
+		dm_write_reg(dev, DM_MODE_CTRL, mode & 0x7f);
+	}
+
+	/* power up phy */
+	dm_write_reg(dev, DM_GPR_CTRL, 1);
+	dm_write_reg(dev, DM_GPR_DATA, 0);
+
+	/* receive broadcast packets */
+	dm9601_set_multicast(dev->net);
+
+	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			  ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(&dev->mii);
+
+out:
+	return ret;
+}
+
+static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	u8 status;
+	int len;
+
+	/* format:
+	   b1: rx status
+	   b2: packet length (incl crc) low
+	   b3: packet length (incl crc) high
+	   b4..n-4: packet data
+	   bn-3..bn: ethernet crc
+	 */
+
+	if (unlikely(skb->len < DM_RX_OVERHEAD)) {
+		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	status = skb->data[0];
+	len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+	if (unlikely(status & 0xbf)) {
+		if (status & 0x01) dev->net->stats.rx_fifo_errors++;
+		if (status & 0x02) dev->net->stats.rx_crc_errors++;
+		if (status & 0x04) dev->net->stats.rx_frame_errors++;
+		if (status & 0x20) dev->net->stats.rx_missed_errors++;
+		if (status & 0x90) dev->net->stats.rx_length_errors++;
+		return 0;
+	}
+
+	skb_pull(skb, 3);
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len, pad;
+
+	/* format:
+	   b1: packet length low
+	   b2: packet length high
+	   b3..n: packet data
+	*/
+
+	len = skb->len + DM_TX_OVERHEAD;
+
+	/* workaround for dm962x errata with tx fifo getting out of
+	 * sync if a USB bulk transfer retry happens right after a
+	 * packet with odd / maxpacket length by adding up to 3 bytes
+	 * padding.
+	 */
+	while ((len & 1) || !(len % dev->maxpacket))
+		len++;
+
+	len -= DM_TX_OVERHEAD; /* hw header doesn't count as part of length */
+	pad = len - skb->len;
+
+	if (skb_headroom(skb) < DM_TX_OVERHEAD || skb_tailroom(skb) < pad) {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, pad, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	__skb_push(skb, DM_TX_OVERHEAD);
+
+	if (pad) {
+		memset(skb->data + skb->len, 0, pad);
+		__skb_put(skb, pad);
+	}
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+static void dm9601_status(struct usbnet *dev, struct urb *urb)
+{
+	int link;
+	u8 *buf;
+
+	/* format:
+	   b0: net status
+	   b1: tx status 1
+	   b2: tx status 2
+	   b3: rx status
+	   b4: rx overflow
+	   b5: rx count
+	   b6: tx count
+	   b7: gpr
+	*/
+
+	if (urb->actual_length < 8)
+		return;
+
+	buf = urb->transfer_buffer;
+
+	link = !!(buf[0] & 0x40);
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static int dm9601_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex);
+
+	return 0;
+}
+
+static const struct driver_info dm9601_info = {
+	.description	= "Davicom DM96xx USB 10/100 Ethernet",
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
+	.bind		= dm9601_bind,
+	.rx_fixup	= dm9601_rx_fixup,
+	.tx_fixup	= dm9601_tx_fixup,
+	.status		= dm9601_status,
+	.link_reset	= dm9601_link_reset,
+	.reset		= dm9601_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	 USB_DEVICE(0x07aa, 0x9601),	/* Corega FEther USB-TXC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9601),	/* Davicom USB-100 */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x6688),	/* ZT6688 USB NIC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x0268),	/* ShanTou ST268 USB NIC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x8515),	/* ADMtek ADM8515 USB NIC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0fe6, 0x9700),	/* DM9601 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9000),	/* DM9000E */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9620),	/* DM9620 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9621),	/* DM9621A USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0a46, 0x9622),	/* DM9622 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0a46, 0x0269),	/* DM962OA USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0a46, 0x1269),	/* DM9621A USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{},			// END
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver dm9601_driver = {
+	.name = "dm9601",
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(dm9601_driver);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Davicom DM96xx USB 10/100 ethernet devices");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/gl620a.c backports-4.2.6-1/drivers/net/usb/gl620a.c
--- backports-4.2.6-1.org/drivers/net/usb/gl620a.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/gl620a.c	2016-06-28 14:35:17.978640554 +0200
@@ -0,0 +1,242 @@
+/*
+ * GeneSys GL620USB-A based links
+ * Copyright (C) 2001 by Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * Copyright (C) 2001 by Stanislav Brabec <utx@penguin.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+
+/*
+ * GeneSys GL620USB-A (www.genesyslogic.com.tw)
+ *
+ * ... should partially interop with the Win32 driver for this hardware.
+ * The GeneSys docs imply there's some NDIS issue motivating this framing.
+ *
+ * Some info from GeneSys:
+ *  - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
+ *    (Some cables, like the BAFO-100c, use the half duplex version.)
+ *  - For the full duplex model, the low bit of the version code says
+ *    which side is which ("left/right").
+ *  - For the half duplex type, a control/interrupt handshake settles
+ *    the transfer direction.  (That's disabled here, partially coded.)
+ *    A control URB would block until other side writes an interrupt.
+ *
+ * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
+ */
+
+// control msg write command
+#define GENELINK_CONNECT_WRITE			0xF0
+// interrupt pipe index
+#define GENELINK_INTERRUPT_PIPE			0x03
+// interrupt read buffer size
+#define INTERRUPT_BUFSIZE			0x08
+// interrupt pipe interval value
+#define GENELINK_INTERRUPT_INTERVAL		0x10
+// max transmit packet number per transmit
+#define GL_MAX_TRANSMIT_PACKETS			32
+// max packet length
+#define GL_MAX_PACKET_LEN			1514
+// max receive buffer size
+#define GL_RCV_BUF_SIZE		\
+	(((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
+
+struct gl_packet {
+	__le32		packet_length;
+	char		packet_data [1];
+};
+
+struct gl_header {
+	__le32			packet_count;
+	struct gl_packet	packets;
+};
+
+static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct gl_header	*header;
+	struct gl_packet	*packet;
+	struct sk_buff		*gl_skb;
+	u32			size;
+	u32			count;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	header = (struct gl_header *) skb->data;
+
+	// get the packet count of the received skb
+	count = le32_to_cpu(header->packet_count);
+	if (count > GL_MAX_TRANSMIT_PACKETS) {
+		netdev_dbg(dev->net,
+			   "genelink: invalid received packet count %u\n",
+			   count);
+		return 0;
+	}
+
+	// set the current packet pointer to the first packet
+	packet = &header->packets;
+
+	// decrement the length for the packet count size 4 bytes
+	skb_pull(skb, 4);
+
+	while (count > 1) {
+		// get the packet length
+		size = le32_to_cpu(packet->packet_length);
+
+		// this may be a broken packet
+		if (size > GL_MAX_PACKET_LEN) {
+			netdev_dbg(dev->net, "genelink: invalid rx length %d\n",
+				   size);
+			return 0;
+		}
+
+		// allocate the skb for the individual packet
+		gl_skb = alloc_skb(size, GFP_ATOMIC);
+		if (gl_skb) {
+
+			// copy the packet data to the new skb
+			memcpy(skb_put(gl_skb, size),
+					packet->packet_data, size);
+			usbnet_skb_return(dev, gl_skb);
+		}
+
+		// advance to the next packet
+		packet = (struct gl_packet *)&packet->packet_data[size];
+		count--;
+
+		// shift the data pointer to the next gl_packet
+		skb_pull(skb, size + 4);
+	}
+
+	// skip the packet length field 4 bytes
+	skb_pull(skb, 4);
+
+	if (skb->len > GL_MAX_PACKET_LEN) {
+		netdev_dbg(dev->net, "genelink: invalid rx length %d\n",
+			   skb->len);
+		return 0;
+	}
+	return 1;
+}
+
+static struct sk_buff *
+genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	int 	padlen;
+	int	length = skb->len;
+	int	headroom = skb_headroom(skb);
+	int	tailroom = skb_tailroom(skb);
+	__le32	*packet_count;
+	__le32	*packet_len;
+
+	// FIXME:  magic numbers, bleech
+	padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
+
+	if ((!skb_cloned(skb))
+			&& ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
+		if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
+			skb->data = memmove(skb->head + (4 + 4*1),
+					     skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff	*skb2;
+		skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	// attach the packet count to the header
+	packet_count = (__le32 *) skb_push(skb, (4 + 4*1));
+	packet_len = packet_count + 1;
+
+	*packet_count = cpu_to_le32(1);
+	*packet_len = cpu_to_le32(length);
+
+	// add padding byte
+	if ((skb->len % dev->maxpacket) == 0)
+		skb_put(skb, 1);
+
+	return skb;
+}
+
+static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	dev->hard_mtu = GL_RCV_BUF_SIZE;
+	dev->net->hard_header_len += 4;
+	dev->in = usb_rcvbulkpipe(dev->udev, dev->driver_info->in);
+	dev->out = usb_sndbulkpipe(dev->udev, dev->driver_info->out);
+	return 0;
+}
+
+static const struct driver_info	genelink_info = {
+	.description =	"Genesys GeneLink",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_GL | FLAG_NO_SETINT,
+	.bind =		genelink_bind,
+	.rx_fixup =	genelink_rx_fixup,
+	.tx_fixup =	genelink_tx_fixup,
+
+	.in = 1, .out = 2,
+
+#ifdef	GENELINK_ACK
+	.check_connect =genelink_check_connect,
+#endif
+};
+
+static const struct usb_device_id	products [] = {
+
+{
+	USB_DEVICE(0x05e3, 0x0502),	// GL620USB-A
+	.driver_info =	(unsigned long) &genelink_info,
+},
+	/* NOT: USB_DEVICE(0x05e3, 0x0501),	// GL620USB
+	 * that's half duplex, not currently supported
+	 */
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver gl620a_driver = {
+	.name =		"gl620a",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(gl620a_driver);
+
+MODULE_AUTHOR("Jiun-Jie Huang");
+MODULE_DESCRIPTION("GL620-USB-A Host-to-Host Link cables");
+MODULE_LICENSE("GPL");
+
diff -Naur backports-4.2.6-1.org/drivers/net/usb/hso.c backports-4.2.6-1/drivers/net/usb/hso.c
--- backports-4.2.6-1.org/drivers/net/usb/hso.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/hso.c	2016-06-28 14:35:17.981973887 +0200
@@ -0,0 +1,3322 @@
+/******************************************************************************
+ *
+ * Driver for Option High Speed Mobile Devices.
+ *
+ *  Copyright (C) 2008 Option International
+ *                     Filip Aben <f.aben@option.com>
+ *                     Denis Joseph Barrow <d.barow@option.com>
+ *                     Jan Dumon <j.dumon@option.com>
+ *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
+ *  			<ajb@spheresystems.co.uk>
+ *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *  Copyright (C) 2008 Novell, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ *  USA
+ *
+ *
+ *****************************************************************************/
+
+/******************************************************************************
+ *
+ * Description of the device:
+ *
+ * Interface 0:	Contains the IP network interface on the bulk end points.
+ *		The multiplexed serial ports are using the interrupt and
+ *		control endpoints.
+ *		Interrupt contains a bitmap telling which multiplexed
+ *		serialport needs servicing.
+ *
+ * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the
+ *		port is opened, as this have a huge impact on the network port
+ *		throughput.
+ *
+ * Interface 2:	Standard modem interface - circuit switched interface, this
+ *		can be used to make a standard ppp connection however it
+ *              should not be used in conjunction with the IP network interface
+ *              enabled for USB performance reasons i.e. if using this set
+ *              ideally disable_net=1.
+ *
+ *****************************************************************************/
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/kmod.h>
+#include <linux/rfkill.h>
+#include <linux/ip.h>
+#include <linux/uaccess.h>
+#include <linux/usb/cdc.h>
+#include <net/arp.h>
+#include <asm/byteorder.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <asm/local.h>
+
+#define MOD_AUTHOR			"Option Wireless"
+#define MOD_DESCRIPTION			"USB High Speed Option driver"
+#define MOD_LICENSE			"GPL"
+
+#define HSO_MAX_NET_DEVICES		10
+#define HSO__MAX_MTU			2048
+#define DEFAULT_MTU			1500
+#define DEFAULT_MRU			1500
+
+#define CTRL_URB_RX_SIZE		1024
+#define CTRL_URB_TX_SIZE		64
+
+#define BULK_URB_RX_SIZE		4096
+#define BULK_URB_TX_SIZE		8192
+
+#define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU
+#define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU
+#define MUX_BULK_RX_BUF_COUNT		4
+#define USB_TYPE_OPTION_VENDOR		0x20
+
+/* These definitions are used with the struct hso_net flags element */
+/* - use *_bit operations on it. (bit indices not values.) */
+#define HSO_NET_RUNNING			0
+
+#define	HSO_NET_TX_TIMEOUT		(HZ*10)
+
+#define HSO_SERIAL_MAGIC		0x48534f31
+
+/* Number of ttys to handle */
+#define HSO_SERIAL_TTY_MINORS		256
+
+#define MAX_RX_URBS			2
+
+/*****************************************************************************/
+/* Debugging functions                                                       */
+/*****************************************************************************/
+#define D__(lvl_, fmt, arg...)				\
+	do {						\
+		printk(lvl_ "[%d:%s]: " fmt "\n",	\
+		       __LINE__, __func__, ## arg);	\
+	} while (0)
+
+#define D_(lvl, args...)				\
+	do {						\
+		if (lvl & debug)			\
+			D__(KERN_INFO, args);		\
+	} while (0)
+
+#define D1(args...)	D_(0x01, ##args)
+#define D2(args...)	D_(0x02, ##args)
+#define D3(args...)	D_(0x04, ##args)
+#define D4(args...)	D_(0x08, ##args)
+#define D5(args...)	D_(0x10, ##args)
+
+/*****************************************************************************/
+/* Enumerators                                                               */
+/*****************************************************************************/
+enum pkt_parse_state {
+	WAIT_IP,
+	WAIT_DATA,
+	WAIT_SYNC
+};
+
+/*****************************************************************************/
+/* Structs                                                                   */
+/*****************************************************************************/
+
+struct hso_shared_int {
+	struct usb_endpoint_descriptor *intr_endp;
+	void *shared_intr_buf;
+	struct urb *shared_intr_urb;
+	struct usb_device *usb;
+	int use_count;
+	int ref_count;
+	struct mutex shared_int_lock;
+};
+
+struct hso_net {
+	struct hso_device *parent;
+	struct net_device *net;
+	struct rfkill *rfkill;
+	char name[24];
+
+	struct usb_endpoint_descriptor *in_endp;
+	struct usb_endpoint_descriptor *out_endp;
+
+	struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
+	struct urb *mux_bulk_tx_urb;
+	void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
+	void *mux_bulk_tx_buf;
+
+	struct sk_buff *skb_rx_buf;
+	struct sk_buff *skb_tx_buf;
+
+	enum pkt_parse_state rx_parse_state;
+	spinlock_t net_lock;
+
+	unsigned short rx_buf_size;
+	unsigned short rx_buf_missing;
+	struct iphdr rx_ip_hdr;
+
+	unsigned long flags;
+};
+
+enum rx_ctrl_state{
+	RX_IDLE,
+	RX_SENT,
+	RX_PENDING
+};
+
+#define BM_REQUEST_TYPE (0xa1)
+#define B_NOTIFICATION  (0x20)
+#define W_VALUE         (0x0)
+#define W_LENGTH        (0x2)
+
+#define B_OVERRUN       (0x1<<6)
+#define B_PARITY        (0x1<<5)
+#define B_FRAMING       (0x1<<4)
+#define B_RING_SIGNAL   (0x1<<3)
+#define B_BREAK         (0x1<<2)
+#define B_TX_CARRIER    (0x1<<1)
+#define B_RX_CARRIER    (0x1<<0)
+
+struct hso_serial_state_notification {
+	u8 bmRequestType;
+	u8 bNotification;
+	u16 wValue;
+	u16 wIndex;
+	u16 wLength;
+	u16 UART_state_bitmap;
+} __packed;
+
+struct hso_tiocmget {
+	struct mutex mutex;
+	wait_queue_head_t waitq;
+	int    intr_completed;
+	struct usb_endpoint_descriptor *endp;
+	struct urb *urb;
+	struct hso_serial_state_notification serial_state_notification;
+	u16    prev_UART_state_bitmap;
+	struct uart_icount icount;
+};
+
+
+struct hso_serial {
+	struct hso_device *parent;
+	int magic;
+	u8 minor;
+
+	struct hso_shared_int *shared_int;
+
+	/* rx/tx urb could be either a bulk urb or a control urb depending
+	   on which serial port it is used on. */
+	struct urb *rx_urb[MAX_RX_URBS];
+	u8 num_rx_urbs;
+	u8 *rx_data[MAX_RX_URBS];
+	u16 rx_data_length;	/* should contain allocated length */
+
+	struct urb *tx_urb;
+	u8 *tx_data;
+	u8 *tx_buffer;
+	u16 tx_data_length;	/* should contain allocated length */
+	u16 tx_data_count;
+	u16 tx_buffer_count;
+	struct usb_ctrlrequest ctrl_req_tx;
+	struct usb_ctrlrequest ctrl_req_rx;
+
+	struct usb_endpoint_descriptor *in_endp;
+	struct usb_endpoint_descriptor *out_endp;
+
+	enum rx_ctrl_state rx_state;
+	u8 rts_state;
+	u8 dtr_state;
+	unsigned tx_urb_used:1;
+
+	struct tty_port port;
+	/* from usb_serial_port */
+	spinlock_t serial_lock;
+
+	int (*write_data) (struct hso_serial *serial);
+	struct hso_tiocmget  *tiocmget;
+	/* Hacks required to get flow control
+	 * working on the serial receive buffers
+	 * so as not to drop characters on the floor.
+	 */
+	int  curr_rx_urb_idx;
+	u8   rx_urb_filled[MAX_RX_URBS];
+	struct tasklet_struct unthrottle_tasklet;
+};
+
+struct hso_device {
+	union {
+		struct hso_serial *dev_serial;
+		struct hso_net *dev_net;
+	} port_data;
+
+	u32 port_spec;
+
+	u8 is_active;
+	u8 usb_gone;
+	struct work_struct async_get_intf;
+	struct work_struct async_put_intf;
+
+	struct usb_device *usb;
+	struct usb_interface *interface;
+
+	struct device *dev;
+	struct kref ref;
+	struct mutex mutex;
+};
+
+/* Type of interface */
+#define HSO_INTF_MASK		0xFF00
+#define	HSO_INTF_MUX		0x0100
+#define	HSO_INTF_BULK   	0x0200
+
+/* Type of port */
+#define HSO_PORT_MASK		0xFF
+#define HSO_PORT_NO_PORT	0x0
+#define	HSO_PORT_CONTROL	0x1
+#define	HSO_PORT_APP		0x2
+#define	HSO_PORT_GPS		0x3
+#define	HSO_PORT_PCSC		0x4
+#define	HSO_PORT_APP2		0x5
+#define HSO_PORT_GPS_CONTROL	0x6
+#define HSO_PORT_MSD		0x7
+#define HSO_PORT_VOICE		0x8
+#define HSO_PORT_DIAG2		0x9
+#define	HSO_PORT_DIAG		0x10
+#define	HSO_PORT_MODEM		0x11
+#define	HSO_PORT_NETWORK	0x12
+
+/* Additional device info */
+#define HSO_INFO_MASK		0xFF000000
+#define HSO_INFO_CRC_BUG	0x01000000
+
+/*****************************************************************************/
+/* Prototypes                                                                */
+/*****************************************************************************/
+/* Serial driver functions */
+static int hso_serial_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear);
+static void ctrl_callback(struct urb *urb);
+static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
+static void hso_kick_transmit(struct hso_serial *serial);
+/* Helper functions */
+static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
+				   struct usb_device *usb, gfp_t gfp);
+static void handle_usb_error(int status, const char *function,
+			     struct hso_device *hso_dev);
+static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
+						  int type, int dir);
+static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
+static void hso_free_interface(struct usb_interface *intf);
+static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
+static int hso_stop_serial_device(struct hso_device *hso_dev);
+static int hso_start_net_device(struct hso_device *hso_dev);
+static void hso_free_shared_int(struct hso_shared_int *shared_int);
+static int hso_stop_net_device(struct hso_device *hso_dev);
+static void hso_serial_ref_free(struct kref *ref);
+static void hso_std_serial_read_bulk_callback(struct urb *urb);
+static int hso_mux_serial_read(struct hso_serial *serial);
+static void async_get_intf(struct work_struct *data);
+static void async_put_intf(struct work_struct *data);
+static int hso_put_activity(struct hso_device *hso_dev);
+static int hso_get_activity(struct hso_device *hso_dev);
+static void tiocmget_intr_callback(struct urb *urb);
+/*****************************************************************************/
+/* Helping functions                                                         */
+/*****************************************************************************/
+
+/* #define DEBUG */
+
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_serial;
+}
+
+/* Debugging functions */
+#ifdef DEBUG
+static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
+		     unsigned int len)
+{
+	static char name[255];
+
+	sprintf(name, "hso[%d:%s]", line_count, func_name);
+	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
+}
+
+#define DUMP(buf_, len_)	\
+	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
+
+#define DUMP1(buf_, len_)			\
+	do {					\
+		if (0x01 & debug)		\
+			DUMP(buf_, len_);	\
+	} while (0)
+#else
+#define DUMP(buf_, len_)
+#define DUMP1(buf_, len_)
+#endif
+
+/* module parameters */
+static int debug;
+static int tty_major;
+static int disable_net;
+
+/* driver info */
+static const char driver_name[] = "hso";
+static const char tty_filename[] = "ttyHS";
+static const char *version = __FILE__ ": " MOD_AUTHOR;
+/* the usb driver itself (registered in hso_init) */
+static struct usb_driver hso_driver;
+/* serial structures */
+static struct tty_driver *tty_drv;
+static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
+static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
+static spinlock_t serial_table_lock;
+
+static const s32 default_port_spec[] = {
+	HSO_INTF_MUX | HSO_PORT_NETWORK,
+	HSO_INTF_BULK | HSO_PORT_DIAG,
+	HSO_INTF_BULK | HSO_PORT_MODEM,
+	0
+};
+
+static const s32 icon321_port_spec[] = {
+	HSO_INTF_MUX | HSO_PORT_NETWORK,
+	HSO_INTF_BULK | HSO_PORT_DIAG2,
+	HSO_INTF_BULK | HSO_PORT_MODEM,
+	HSO_INTF_BULK | HSO_PORT_DIAG,
+	0
+};
+
+#define default_port_device(vendor, product)	\
+	USB_DEVICE(vendor, product),	\
+		.driver_info = (kernel_ulong_t)default_port_spec
+
+#define icon321_port_device(vendor, product)	\
+	USB_DEVICE(vendor, product),	\
+		.driver_info = (kernel_ulong_t)icon321_port_spec
+
+/* list of devices we support */
+static const struct usb_device_id hso_ids[] = {
+	{default_port_device(0x0af0, 0x6711)},
+	{default_port_device(0x0af0, 0x6731)},
+	{default_port_device(0x0af0, 0x6751)},
+	{default_port_device(0x0af0, 0x6771)},
+	{default_port_device(0x0af0, 0x6791)},
+	{default_port_device(0x0af0, 0x6811)},
+	{default_port_device(0x0af0, 0x6911)},
+	{default_port_device(0x0af0, 0x6951)},
+	{default_port_device(0x0af0, 0x6971)},
+	{default_port_device(0x0af0, 0x7011)},
+	{default_port_device(0x0af0, 0x7031)},
+	{default_port_device(0x0af0, 0x7051)},
+	{default_port_device(0x0af0, 0x7071)},
+	{default_port_device(0x0af0, 0x7111)},
+	{default_port_device(0x0af0, 0x7211)},
+	{default_port_device(0x0af0, 0x7251)},
+	{default_port_device(0x0af0, 0x7271)},
+	{default_port_device(0x0af0, 0x7311)},
+	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
+	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
+	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
+	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
+	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
+	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
+	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7701)},
+	{USB_DEVICE(0x0af0, 0x7706)},
+	{USB_DEVICE(0x0af0, 0x7801)},
+	{USB_DEVICE(0x0af0, 0x7901)},
+	{USB_DEVICE(0x0af0, 0x7A01)},
+	{USB_DEVICE(0x0af0, 0x7A05)},
+	{USB_DEVICE(0x0af0, 0x8200)},
+	{USB_DEVICE(0x0af0, 0x8201)},
+	{USB_DEVICE(0x0af0, 0x8300)},
+	{USB_DEVICE(0x0af0, 0x8302)},
+	{USB_DEVICE(0x0af0, 0x8304)},
+	{USB_DEVICE(0x0af0, 0x8400)},
+	{USB_DEVICE(0x0af0, 0x8600)},
+	{USB_DEVICE(0x0af0, 0x8800)},
+	{USB_DEVICE(0x0af0, 0x8900)},
+	{USB_DEVICE(0x0af0, 0x9000)},
+	{USB_DEVICE(0x0af0, 0x9200)},		/* Option GTM671WFS */
+	{USB_DEVICE(0x0af0, 0xd035)},
+	{USB_DEVICE(0x0af0, 0xd055)},
+	{USB_DEVICE(0x0af0, 0xd155)},
+	{USB_DEVICE(0x0af0, 0xd255)},
+	{USB_DEVICE(0x0af0, 0xd057)},
+	{USB_DEVICE(0x0af0, 0xd157)},
+	{USB_DEVICE(0x0af0, 0xd257)},
+	{USB_DEVICE(0x0af0, 0xd357)},
+	{USB_DEVICE(0x0af0, 0xd058)},
+	{USB_DEVICE(0x0af0, 0xc100)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, hso_ids);
+
+/* Sysfs attribute */
+static ssize_t hso_sysfs_show_porttype(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct hso_device *hso_dev = dev_get_drvdata(dev);
+	char *port_name;
+
+	if (!hso_dev)
+		return 0;
+
+	switch (hso_dev->port_spec & HSO_PORT_MASK) {
+	case HSO_PORT_CONTROL:
+		port_name = "Control";
+		break;
+	case HSO_PORT_APP:
+		port_name = "Application";
+		break;
+	case HSO_PORT_APP2:
+		port_name = "Application2";
+		break;
+	case HSO_PORT_GPS:
+		port_name = "GPS";
+		break;
+	case HSO_PORT_GPS_CONTROL:
+		port_name = "GPS Control";
+		break;
+	case HSO_PORT_PCSC:
+		port_name = "PCSC";
+		break;
+	case HSO_PORT_DIAG:
+		port_name = "Diagnostic";
+		break;
+	case HSO_PORT_DIAG2:
+		port_name = "Diagnostic2";
+		break;
+	case HSO_PORT_MODEM:
+		port_name = "Modem";
+		break;
+	case HSO_PORT_NETWORK:
+		port_name = "Network";
+		break;
+	default:
+		port_name = "Unknown";
+		break;
+	}
+
+	return sprintf(buf, "%s\n", port_name);
+}
+static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
+
+static struct attribute *hso_serial_dev_attrs[] = {
+	&dev_attr_hsotype.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(hso_serial_dev);
+
+static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
+{
+	int idx;
+
+	for (idx = 0; idx < serial->num_rx_urbs; idx++)
+		if (serial->rx_urb[idx] == urb)
+			return idx;
+	dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
+	return -1;
+}
+
+/* converts mux value to a port spec value */
+static u32 hso_mux_to_port(int mux)
+{
+	u32 result;
+
+	switch (mux) {
+	case 0x1:
+		result = HSO_PORT_CONTROL;
+		break;
+	case 0x2:
+		result = HSO_PORT_APP;
+		break;
+	case 0x4:
+		result = HSO_PORT_PCSC;
+		break;
+	case 0x8:
+		result = HSO_PORT_GPS;
+		break;
+	case 0x10:
+		result = HSO_PORT_APP2;
+		break;
+	default:
+		result = HSO_PORT_NO_PORT;
+	}
+	return result;
+}
+
+/* converts port spec value to a mux value */
+static u32 hso_port_to_mux(int port)
+{
+	u32 result;
+
+	switch (port & HSO_PORT_MASK) {
+	case HSO_PORT_CONTROL:
+		result = 0x0;
+		break;
+	case HSO_PORT_APP:
+		result = 0x1;
+		break;
+	case HSO_PORT_PCSC:
+		result = 0x2;
+		break;
+	case HSO_PORT_GPS:
+		result = 0x3;
+		break;
+	case HSO_PORT_APP2:
+		result = 0x4;
+		break;
+	default:
+		result = 0x0;
+	}
+	return result;
+}
+
+static struct hso_serial *get_serial_by_shared_int_and_type(
+					struct hso_shared_int *shared_int,
+					int mux)
+{
+	int i, port;
+
+	port = hso_mux_to_port(mux);
+
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] &&
+		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
+		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
+			return dev2ser(serial_table[i]);
+		}
+	}
+
+	return NULL;
+}
+
+static struct hso_serial *get_serial_by_index(unsigned index)
+{
+	struct hso_serial *serial = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial_table_lock, flags);
+	if (serial_table[index])
+		serial = dev2ser(serial_table[index]);
+	spin_unlock_irqrestore(&serial_table_lock, flags);
+
+	return serial;
+}
+
+static int get_free_serial_index(void)
+{
+	int index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial_table_lock, flags);
+	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
+		if (serial_table[index] == NULL) {
+			spin_unlock_irqrestore(&serial_table_lock, flags);
+			return index;
+		}
+	}
+	spin_unlock_irqrestore(&serial_table_lock, flags);
+
+	printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
+	return -1;
+}
+
+static void set_serial_by_index(unsigned index, struct hso_serial *serial)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial_table_lock, flags);
+	if (serial)
+		serial_table[index] = serial->parent;
+	else
+		serial_table[index] = NULL;
+	spin_unlock_irqrestore(&serial_table_lock, flags);
+}
+
+static void handle_usb_error(int status, const char *function,
+			     struct hso_device *hso_dev)
+{
+	char *explanation;
+
+	switch (status) {
+	case -ENODEV:
+		explanation = "no device";
+		break;
+	case -ENOENT:
+		explanation = "endpoint not enabled";
+		break;
+	case -EPIPE:
+		explanation = "endpoint stalled";
+		break;
+	case -ENOSPC:
+		explanation = "not enough bandwidth";
+		break;
+	case -ESHUTDOWN:
+		explanation = "device disabled";
+		break;
+	case -EHOSTUNREACH:
+		explanation = "device suspended";
+		break;
+	case -EINVAL:
+	case -EAGAIN:
+	case -EFBIG:
+	case -EMSGSIZE:
+		explanation = "internal error";
+		break;
+	case -EILSEQ:
+	case -EPROTO:
+	case -ETIME:
+	case -ETIMEDOUT:
+		explanation = "protocol error";
+		if (hso_dev)
+			usb_queue_reset_device(hso_dev->interface);
+		break;
+	default:
+		explanation = "unknown status";
+		break;
+	}
+
+	/* log a meaningful explanation of an USB status */
+	D1("%s: received USB status - %s (%d)", function, explanation, status);
+}
+
+/* Network interface functions */
+
+/* called when net interface is brought up by ifconfig */
+static int hso_net_open(struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+	unsigned long flags = 0;
+
+	if (!odev) {
+		dev_err(&net->dev, "No net device !\n");
+		return -ENODEV;
+	}
+
+	odev->skb_tx_buf = NULL;
+
+	/* setup environment */
+	spin_lock_irqsave(&odev->net_lock, flags);
+	odev->rx_parse_state = WAIT_IP;
+	odev->rx_buf_size = 0;
+	odev->rx_buf_missing = sizeof(struct iphdr);
+	spin_unlock_irqrestore(&odev->net_lock, flags);
+
+	/* We are up and running. */
+	set_bit(HSO_NET_RUNNING, &odev->flags);
+	hso_start_net_device(odev->parent);
+
+	/* Tell the kernel we are ready to start receiving from it */
+	netif_start_queue(net);
+
+	return 0;
+}
+
+/* called when interface is brought down by ifconfig */
+static int hso_net_close(struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+
+	/* we don't need the queue anymore */
+	netif_stop_queue(net);
+	/* no longer running */
+	clear_bit(HSO_NET_RUNNING, &odev->flags);
+
+	hso_stop_net_device(odev->parent);
+
+	/* done */
+	return 0;
+}
+
+/* USB tells is xmit done, we should start the netqueue again */
+static void write_bulk_callback(struct urb *urb)
+{
+	struct hso_net *odev = urb->context;
+	int status = urb->status;
+
+	/* Sanity check */
+	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
+		dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
+		return;
+	}
+
+	/* Do we still have a valid kernel network device? */
+	if (!netif_device_present(odev->net)) {
+		dev_err(&urb->dev->dev, "%s: net device not present\n",
+			__func__);
+		return;
+	}
+
+	/* log status, but don't act on it, we don't need to resubmit anything
+	 * anyhow */
+	if (status)
+		handle_usb_error(status, __func__, odev->parent);
+
+	hso_put_activity(odev->parent);
+
+	/* Tell the network interface we are ready for another frame */
+	netif_wake_queue(odev->net);
+}
+
+/* called by kernel when we need to transmit a packet */
+static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
+					    struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+	int result;
+
+	/* Tell the kernel, "No more frames 'til we are done with this one." */
+	netif_stop_queue(net);
+	if (hso_get_activity(odev->parent) == -EAGAIN) {
+		odev->skb_tx_buf = skb;
+		return NETDEV_TX_OK;
+	}
+
+	/* log if asked */
+	DUMP1(skb->data, skb->len);
+	/* Copy it from kernel memory to OUR memory */
+	memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
+	D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
+
+	/* Fill in the URB for shipping it out. */
+	usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
+			  odev->parent->usb,
+			  usb_sndbulkpipe(odev->parent->usb,
+					  odev->out_endp->
+					  bEndpointAddress & 0x7F),
+			  odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
+			  odev);
+
+	/* Deal with the Zero Length packet problem, I hope */
+	odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
+
+	/* Send the URB on its merry way. */
+	result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
+	if (result) {
+		dev_warn(&odev->parent->interface->dev,
+			"failed mux_bulk_tx_urb %d\n", result);
+		net->stats.tx_errors++;
+		netif_start_queue(net);
+	} else {
+		net->stats.tx_packets++;
+		net->stats.tx_bytes += skb->len;
+	}
+	dev_kfree_skb(skb);
+	/* we're done */
+	return NETDEV_TX_OK;
+}
+
+static const struct ethtool_ops ops = {
+	.get_link = ethtool_op_get_link
+};
+
+/* called when a packet did not ack after watchdogtimeout */
+static void hso_net_tx_timeout(struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+
+	if (!odev)
+		return;
+
+	/* Tell syslog we are hosed. */
+	dev_warn(&net->dev, "Tx timed out.\n");
+
+	/* Tear the waiting frame off the list */
+	if (odev->mux_bulk_tx_urb &&
+	    (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
+		usb_unlink_urb(odev->mux_bulk_tx_urb);
+
+	/* Update statistics */
+	net->stats.tx_errors++;
+}
+
+/* make a real packet from the received USB buffer */
+static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
+			unsigned int count, unsigned char is_eop)
+{
+	unsigned short temp_bytes;
+	unsigned short buffer_offset = 0;
+	unsigned short frame_len;
+	unsigned char *tmp_rx_buf;
+
+	/* log if needed */
+	D1("Rx %d bytes", count);
+	DUMP(ip_pkt, min(128, (int)count));
+
+	while (count) {
+		switch (odev->rx_parse_state) {
+		case WAIT_IP:
+			/* waiting for IP header. */
+			/* wanted bytes - size of ip header */
+			temp_bytes =
+			    (count <
+			     odev->rx_buf_missing) ? count : odev->
+			    rx_buf_missing;
+
+			memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
+			       odev->rx_buf_size, ip_pkt + buffer_offset,
+			       temp_bytes);
+
+			odev->rx_buf_size += temp_bytes;
+			buffer_offset += temp_bytes;
+			odev->rx_buf_missing -= temp_bytes;
+			count -= temp_bytes;
+
+			if (!odev->rx_buf_missing) {
+				/* header is complete allocate an sk_buffer and
+				 * continue to WAIT_DATA */
+				frame_len = ntohs(odev->rx_ip_hdr.tot_len);
+
+				if ((frame_len > DEFAULT_MRU) ||
+				    (frame_len < sizeof(struct iphdr))) {
+					dev_err(&odev->net->dev,
+						"Invalid frame (%d) length\n",
+						frame_len);
+					odev->rx_parse_state = WAIT_SYNC;
+					continue;
+				}
+				/* Allocate an sk_buff */
+				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
+								    frame_len);
+				if (!odev->skb_rx_buf) {
+					/* We got no receive buffer. */
+					D1("could not allocate memory");
+					odev->rx_parse_state = WAIT_SYNC;
+					continue;
+				}
+
+				/* Copy what we got so far. make room for iphdr
+				 * after tail. */
+				tmp_rx_buf =
+				    skb_put(odev->skb_rx_buf,
+					    sizeof(struct iphdr));
+				memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
+				       sizeof(struct iphdr));
+
+				/* ETH_HLEN */
+				odev->rx_buf_size = sizeof(struct iphdr);
+
+				/* Filip actually use .tot_len */
+				odev->rx_buf_missing =
+				    frame_len - sizeof(struct iphdr);
+				odev->rx_parse_state = WAIT_DATA;
+			}
+			break;
+
+		case WAIT_DATA:
+			temp_bytes = (count < odev->rx_buf_missing)
+					? count : odev->rx_buf_missing;
+
+			/* Copy the rest of the bytes that are left in the
+			 * buffer into the waiting sk_buf. */
+			/* Make room for temp_bytes after tail. */
+			tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
+			memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
+
+			odev->rx_buf_missing -= temp_bytes;
+			count -= temp_bytes;
+			buffer_offset += temp_bytes;
+			odev->rx_buf_size += temp_bytes;
+			if (!odev->rx_buf_missing) {
+				/* Packet is complete. Inject into stack. */
+				/* We have IP packet here */
+				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
+				skb_reset_mac_header(odev->skb_rx_buf);
+
+				/* Ship it off to the kernel */
+				netif_rx(odev->skb_rx_buf);
+				/* No longer our buffer. */
+				odev->skb_rx_buf = NULL;
+
+				/* update out statistics */
+				odev->net->stats.rx_packets++;
+
+				odev->net->stats.rx_bytes += odev->rx_buf_size;
+
+				odev->rx_buf_size = 0;
+				odev->rx_buf_missing = sizeof(struct iphdr);
+				odev->rx_parse_state = WAIT_IP;
+			}
+			break;
+
+		case WAIT_SYNC:
+			D1(" W_S");
+			count = 0;
+			break;
+		default:
+			D1(" ");
+			count--;
+			break;
+		}
+	}
+
+	/* Recovery mechanism for WAIT_SYNC state. */
+	if (is_eop) {
+		if (odev->rx_parse_state == WAIT_SYNC) {
+			odev->rx_parse_state = WAIT_IP;
+			odev->rx_buf_size = 0;
+			odev->rx_buf_missing = sizeof(struct iphdr);
+		}
+	}
+}
+
+static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
+{
+	static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
+	u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
+
+	if (((rest == 5) || (rest == 6)) &&
+	    !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
+		    crc_check, 4)) {
+		urb->actual_length -= 4;
+	}
+}
+
+/* Moving data from usb to kernel (in interrupt state) */
+static void read_bulk_callback(struct urb *urb)
+{
+	struct hso_net *odev = urb->context;
+	struct net_device *net;
+	int result;
+	int status = urb->status;
+
+	/* is al ok?  (Filip: Who's Al ?) */
+	if (status) {
+		handle_usb_error(status, __func__, odev->parent);
+		return;
+	}
+
+	/* Sanity check */
+	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
+		D1("BULK IN callback but driver is not active!");
+		return;
+	}
+	usb_mark_last_busy(urb->dev);
+
+	net = odev->net;
+
+	if (!netif_device_present(net)) {
+		/* Somebody killed our network interface... */
+		return;
+	}
+
+	if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
+		fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
+
+	/* do we even have a packet? */
+	if (urb->actual_length) {
+		/* Handle the IP stream, add header and push it onto network
+		 * stack if the packet is complete. */
+		spin_lock(&odev->net_lock);
+		packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
+			    (urb->transfer_buffer_length >
+			     urb->actual_length) ? 1 : 0);
+		spin_unlock(&odev->net_lock);
+	}
+
+	/* We are done with this URB, resubmit it. Prep the USB to wait for
+	 * another frame. Reuse same as received. */
+	usb_fill_bulk_urb(urb,
+			  odev->parent->usb,
+			  usb_rcvbulkpipe(odev->parent->usb,
+					  odev->in_endp->
+					  bEndpointAddress & 0x7F),
+			  urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
+			  read_bulk_callback, odev);
+
+	/* Give this to the USB subsystem so it can tell us when more data
+	 * arrives. */
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_warn(&odev->parent->interface->dev,
+			 "%s failed submit mux_bulk_rx_urb %d\n", __func__,
+			 result);
+}
+
+/* Serial driver functions */
+
+static void hso_init_termios(struct ktermios *termios)
+{
+	/*
+	 * The default requirements for this device are:
+	 */
+	termios->c_iflag &=
+		~(IGNBRK	/* disable ignore break */
+		| BRKINT	/* disable break causes interrupt */
+		| PARMRK	/* disable mark parity errors */
+		| ISTRIP	/* disable clear high bit of input characters */
+		| INLCR		/* disable translate NL to CR */
+		| IGNCR		/* disable ignore CR */
+		| ICRNL		/* disable translate CR to NL */
+		| IXON);	/* disable enable XON/XOFF flow control */
+
+	/* disable postprocess output characters */
+	termios->c_oflag &= ~OPOST;
+
+	termios->c_lflag &=
+		~(ECHO		/* disable echo input characters */
+		| ECHONL	/* disable echo new line */
+		| ICANON	/* disable erase, kill, werase, and rprnt
+				   special characters */
+		| ISIG		/* disable interrupt, quit, and suspend special
+				   characters */
+		| IEXTEN);	/* disable non-POSIX special characters */
+
+	termios->c_cflag &=
+		~(CSIZE		/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD		/* clear current baud rate */
+		| CBAUDEX);	/* clear current buad rate */
+
+	termios->c_cflag |= CS8;	/* character size 8 bits */
+
+	/* baud rate 115200 */
+	tty_termios_encode_baud_rate(termios, 115200, 115200);
+}
+
+static void _hso_serial_set_termios(struct tty_struct *tty,
+				    struct ktermios *old)
+{
+	struct hso_serial *serial = tty->driver_data;
+
+	if (!serial) {
+		printk(KERN_ERR "%s: no tty structures", __func__);
+		return;
+	}
+
+	D4("port %d", serial->minor);
+
+	/*
+	 *	Fix up unsupported bits
+	 */
+	tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
+
+	tty->termios.c_cflag &=
+		~(CSIZE		/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD		/* clear current baud rate */
+		| CBAUDEX);	/* clear current buad rate */
+
+	tty->termios.c_cflag |= CS8;	/* character size 8 bits */
+
+	/* baud rate 115200 */
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
+{
+	int result;
+	/* We are done with this URB, resubmit it. Prep the USB to wait for
+	 * another frame */
+	usb_fill_bulk_urb(urb, serial->parent->usb,
+			  usb_rcvbulkpipe(serial->parent->usb,
+					  serial->in_endp->
+					  bEndpointAddress & 0x7F),
+			  urb->transfer_buffer, serial->rx_data_length,
+			  hso_std_serial_read_bulk_callback, serial);
+	/* Give this to the USB subsystem so it can tell us when more data
+	 * arrives. */
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result) {
+		dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
+			__func__, result);
+	}
+}
+
+
+
+
+static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
+{
+	int count;
+	struct urb *curr_urb;
+
+	while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
+		curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
+		count = put_rxbuf_data(curr_urb, serial);
+		if (count == -1)
+			return;
+		if (count == 0) {
+			serial->curr_rx_urb_idx++;
+			if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
+				serial->curr_rx_urb_idx = 0;
+			hso_resubmit_rx_bulk_urb(serial, curr_urb);
+		}
+	}
+}
+
+static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
+{
+	int count = 0;
+	struct urb *urb;
+
+	urb = serial->rx_urb[0];
+	if (atomic_read(&serial->port.count) > 0) {
+		count = put_rxbuf_data(urb, serial);
+		if (count == -1)
+			return;
+	}
+	/* Re issue a read as long as we receive data. */
+
+	if (count == 0 && ((urb->actual_length != 0) ||
+			   (serial->rx_state == RX_PENDING))) {
+		serial->rx_state = RX_SENT;
+		hso_mux_serial_read(serial);
+	} else
+		serial->rx_state = RX_IDLE;
+}
+
+
+/* read callback for Diag and CS port */
+static void hso_std_serial_read_bulk_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	int status = urb->status;
+
+	D4("\n--- Got serial_read_bulk callback %02x ---", status);
+
+	/* sanity check */
+	if (!serial) {
+		D1("serial == NULL");
+		return;
+	}
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+
+	D1("Actual length = %d\n", urb->actual_length);
+	DUMP1(urb->transfer_buffer, urb->actual_length);
+
+	/* Anyone listening? */
+	if (atomic_read(&serial->port.count) == 0)
+		return;
+
+	if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
+		fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
+	/* Valid data, handle RX data */
+	spin_lock(&serial->serial_lock);
+	serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
+	put_rxbuf_data_and_resubmit_bulk_urb(serial);
+	spin_unlock(&serial->serial_lock);
+}
+
+/*
+ * This needs to be a tasklet otherwise we will
+ * end up recursively calling this function.
+ */
+static void hso_unthrottle_tasklet(struct hso_serial *serial)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if ((serial->parent->port_spec & HSO_INTF_MUX))
+		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
+	else
+		put_rxbuf_data_and_resubmit_bulk_urb(serial);
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+static	void hso_unthrottle(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+
+	tasklet_hi_schedule(&serial->unthrottle_tasklet);
+}
+
+/* open the requested serial port */
+static int hso_serial_open(struct tty_struct *tty, struct file *filp)
+{
+	struct hso_serial *serial = get_serial_by_index(tty->index);
+	int result;
+
+	/* sanity check */
+	if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
+		WARN_ON(1);
+		tty->driver_data = NULL;
+		D1("Failed to open port");
+		return -ENODEV;
+	}
+
+	mutex_lock(&serial->parent->mutex);
+	result = usb_autopm_get_interface(serial->parent->interface);
+	if (result < 0)
+		goto err_out;
+
+	D1("Opening %d", serial->minor);
+
+	/* setup */
+	tty->driver_data = serial;
+	tty_port_tty_set(&serial->port, tty);
+
+	/* check for port already opened, if not set the termios */
+	if (atomic_inc_return(&serial->port.count) == 1) {
+		serial->rx_state = RX_IDLE;
+		/* Force default termio settings */
+		_hso_serial_set_termios(tty, NULL);
+		tasklet_init(&serial->unthrottle_tasklet,
+			     (void (*)(unsigned long))hso_unthrottle_tasklet,
+			     (unsigned long)serial);
+		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
+		if (result) {
+			hso_stop_serial_device(serial->parent);
+			atomic_dec(&serial->port.count);
+		} else {
+			kref_get(&serial->parent->ref);
+		}
+	} else {
+		D1("Port was already open");
+	}
+
+	usb_autopm_put_interface(serial->parent->interface);
+
+	/* done */
+	if (result)
+		hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
+err_out:
+	mutex_unlock(&serial->parent->mutex);
+	return result;
+}
+
+/* close the requested serial port */
+static void hso_serial_close(struct tty_struct *tty, struct file *filp)
+{
+	struct hso_serial *serial = tty->driver_data;
+	u8 usb_gone;
+
+	D1("Closing serial port");
+
+	/* Open failed, no close cleanup required */
+	if (serial == NULL)
+		return;
+
+	mutex_lock(&serial->parent->mutex);
+	usb_gone = serial->parent->usb_gone;
+
+	if (!usb_gone)
+		usb_autopm_get_interface(serial->parent->interface);
+
+	/* reset the rts and dtr */
+	/* do the actual close */
+	atomic_dec(&serial->port.count);
+
+	if (atomic_read(&serial->port.count) <= 0) {
+		atomic_set(&serial->port.count, 0);
+		tty_port_tty_set(&serial->port, NULL);
+		if (!usb_gone)
+			hso_stop_serial_device(serial->parent);
+		tasklet_kill(&serial->unthrottle_tasklet);
+	}
+
+	if (!usb_gone)
+		usb_autopm_put_interface(serial->parent->interface);
+
+	mutex_unlock(&serial->parent->mutex);
+}
+
+/* close the requested serial port */
+static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
+			    int count)
+{
+	struct hso_serial *serial = tty->driver_data;
+	int space, tx_bytes;
+	unsigned long flags;
+
+	/* sanity check */
+	if (serial == NULL) {
+		printk(KERN_ERR "%s: serial is NULL\n", __func__);
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+
+	space = serial->tx_data_length - serial->tx_buffer_count;
+	tx_bytes = (count < space) ? count : space;
+
+	if (!tx_bytes)
+		goto out;
+
+	memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
+	serial->tx_buffer_count += tx_bytes;
+
+out:
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	hso_kick_transmit(serial);
+	/* done */
+	return tx_bytes;
+}
+
+/* how much room is there for writing */
+static int hso_serial_write_room(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+	int room;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	room = serial->tx_data_length - serial->tx_buffer_count;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	/* return free room */
+	return room;
+}
+
+static void hso_serial_cleanup(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+
+	if (!serial)
+		return;
+
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
+}
+
+/* setup the term */
+static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
+{
+	struct hso_serial *serial = tty->driver_data;
+	unsigned long flags;
+
+	if (old)
+		D5("Termios called with: cflags new[%d] - old[%d]",
+		   tty->termios.c_cflag, old->c_cflag);
+
+	/* the actual setup */
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if (atomic_read(&serial->port.count))
+		_hso_serial_set_termios(tty, old);
+	else
+		tty->termios = *old;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	/* done */
+}
+
+/* how many characters in the buffer */
+static int hso_serial_chars_in_buffer(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+	int chars;
+	unsigned long flags;
+
+	/* sanity check */
+	if (serial == NULL)
+		return 0;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	chars = serial->tx_buffer_count;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	return chars;
+}
+static int tiocmget_submit_urb(struct hso_serial *serial,
+			       struct hso_tiocmget *tiocmget,
+			       struct usb_device *usb)
+{
+	int result;
+
+	if (serial->parent->usb_gone)
+		return -ENODEV;
+	usb_fill_int_urb(tiocmget->urb, usb,
+			 usb_rcvintpipe(usb,
+					tiocmget->endp->
+					bEndpointAddress & 0x7F),
+			 &tiocmget->serial_state_notification,
+			 sizeof(struct hso_serial_state_notification),
+			 tiocmget_intr_callback, serial,
+			 tiocmget->endp->bInterval);
+	result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
+	if (result) {
+		dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
+			 result);
+	}
+	return result;
+
+}
+
+static void tiocmget_intr_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	struct hso_tiocmget *tiocmget;
+	int status = urb->status;
+	u16 UART_state_bitmap, prev_UART_state_bitmap;
+	struct uart_icount *icount;
+	struct hso_serial_state_notification *serial_state_notification;
+	struct usb_device *usb;
+	struct usb_interface *interface;
+	int if_num;
+
+	/* Sanity checks */
+	if (!serial)
+		return;
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+
+	/* tiocmget is only supported on HSO_PORT_MODEM */
+	tiocmget = serial->tiocmget;
+	if (!tiocmget)
+		return;
+	BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
+
+	usb = serial->parent->usb;
+	interface = serial->parent->interface;
+
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* wIndex should be the USB interface number of the port to which the
+	 * notification applies, which should always be the Modem port.
+	 */
+	serial_state_notification = &tiocmget->serial_state_notification;
+	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
+	    serial_state_notification->bNotification != B_NOTIFICATION ||
+	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
+	    le16_to_cpu(serial_state_notification->wIndex) != if_num ||
+	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
+		dev_warn(&usb->dev,
+			 "hso received invalid serial state notification\n");
+		DUMP(serial_state_notification,
+		     sizeof(struct hso_serial_state_notification));
+	} else {
+
+		UART_state_bitmap = le16_to_cpu(serial_state_notification->
+						UART_state_bitmap);
+		prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
+		icount = &tiocmget->icount;
+		spin_lock(&serial->serial_lock);
+		if ((UART_state_bitmap & B_OVERRUN) !=
+		   (prev_UART_state_bitmap & B_OVERRUN))
+			icount->parity++;
+		if ((UART_state_bitmap & B_PARITY) !=
+		   (prev_UART_state_bitmap & B_PARITY))
+			icount->parity++;
+		if ((UART_state_bitmap & B_FRAMING) !=
+		   (prev_UART_state_bitmap & B_FRAMING))
+			icount->frame++;
+		if ((UART_state_bitmap & B_RING_SIGNAL) &&
+		   !(prev_UART_state_bitmap & B_RING_SIGNAL))
+			icount->rng++;
+		if ((UART_state_bitmap & B_BREAK) !=
+		   (prev_UART_state_bitmap & B_BREAK))
+			icount->brk++;
+		if ((UART_state_bitmap & B_TX_CARRIER) !=
+		   (prev_UART_state_bitmap & B_TX_CARRIER))
+			icount->dsr++;
+		if ((UART_state_bitmap & B_RX_CARRIER) !=
+		   (prev_UART_state_bitmap & B_RX_CARRIER))
+			icount->dcd++;
+		tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
+		spin_unlock(&serial->serial_lock);
+		tiocmget->intr_completed = 1;
+		wake_up_interruptible(&tiocmget->waitq);
+	}
+	memset(serial_state_notification, 0,
+	       sizeof(struct hso_serial_state_notification));
+	tiocmget_submit_urb(serial,
+			    tiocmget,
+			    serial->parent->usb);
+}
+
+/*
+ * next few functions largely stolen from drivers/serial/serial_core.c
+ */
+/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+static int
+hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct uart_icount cprev, cnow;
+	struct hso_tiocmget  *tiocmget;
+	int ret;
+
+	tiocmget = serial->tiocmget;
+	if (!tiocmget)
+		return -ENOENT;
+	/*
+	 * note the counters on entry
+	 */
+	spin_lock_irq(&serial->serial_lock);
+	memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&serial->serial_lock);
+	add_wait_queue(&tiocmget->waitq, &wait);
+	for (;;) {
+		spin_lock_irq(&serial->serial_lock);
+		memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+		spin_unlock_irq(&serial->serial_lock);
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
+			ret = 0;
+			break;
+		}
+		schedule();
+		/* see if a signal did it */
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+		cprev = cnow;
+	}
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&tiocmget->waitq, &wait);
+
+	return ret;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int hso_get_count(struct tty_struct *tty,
+		  struct serial_icounter_struct *icount)
+{
+	struct uart_icount cnow;
+	struct hso_serial *serial = tty->driver_data;
+	struct hso_tiocmget  *tiocmget = serial->tiocmget;
+
+	memset(icount, 0, sizeof(struct serial_icounter_struct));
+
+	if (!tiocmget)
+		 return -ENOENT;
+	spin_lock_irq(&serial->serial_lock);
+	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&serial->serial_lock);
+
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+
+static int hso_serial_tiocmget(struct tty_struct *tty)
+{
+	int retval;
+	struct hso_serial *serial = tty->driver_data;
+	struct hso_tiocmget  *tiocmget;
+	u16 UART_state_bitmap;
+
+	/* sanity check */
+	if (!serial) {
+		D1("no tty structures");
+		return -EINVAL;
+	}
+	spin_lock_irq(&serial->serial_lock);
+	retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
+	    ((serial->dtr_state) ? TIOCM_DTR : 0);
+	tiocmget = serial->tiocmget;
+	if (tiocmget) {
+
+		UART_state_bitmap = le16_to_cpu(
+			tiocmget->prev_UART_state_bitmap);
+		if (UART_state_bitmap & B_RING_SIGNAL)
+			retval |=  TIOCM_RNG;
+		if (UART_state_bitmap & B_RX_CARRIER)
+			retval |=  TIOCM_CD;
+		if (UART_state_bitmap & B_TX_CARRIER)
+			retval |=  TIOCM_DSR;
+	}
+	spin_unlock_irq(&serial->serial_lock);
+	return retval;
+}
+
+static int hso_serial_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear)
+{
+	int val = 0;
+	unsigned long flags;
+	int if_num;
+	struct hso_serial *serial = tty->driver_data;
+	struct usb_interface *interface;
+
+	/* sanity check */
+	if (!serial) {
+		D1("no tty structures");
+		return -EINVAL;
+	}
+
+	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
+		return -EINVAL;
+
+	interface = serial->parent->interface;
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if (set & TIOCM_RTS)
+		serial->rts_state = 1;
+	if (set & TIOCM_DTR)
+		serial->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		serial->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		serial->dtr_state = 0;
+
+	if (serial->dtr_state)
+		val |= 0x01;
+	if (serial->rts_state)
+		val |= 0x02;
+
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	return usb_control_msg(serial->parent->usb,
+			       usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
+			       0x21, val, if_num, NULL, 0,
+			       USB_CTRL_SET_TIMEOUT);
+}
+
+static int hso_serial_ioctl(struct tty_struct *tty,
+			    unsigned int cmd, unsigned long arg)
+{
+	struct hso_serial *serial = tty->driver_data;
+	int ret = 0;
+	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
+
+	if (!serial)
+		return -ENODEV;
+	switch (cmd) {
+	case TIOCMIWAIT:
+		ret = hso_wait_modem_status(serial, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+
+/* starts a transmit */
+static void hso_kick_transmit(struct hso_serial *serial)
+{
+	u8 *temp;
+	unsigned long flags;
+	int res;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if (!serial->tx_buffer_count)
+		goto out;
+
+	if (serial->tx_urb_used)
+		goto out;
+
+	/* Wakeup USB interface if necessary */
+	if (hso_get_activity(serial->parent) == -EAGAIN)
+		goto out;
+
+	/* Switch pointers around to avoid memcpy */
+	temp = serial->tx_buffer;
+	serial->tx_buffer = serial->tx_data;
+	serial->tx_data = temp;
+	serial->tx_data_count = serial->tx_buffer_count;
+	serial->tx_buffer_count = 0;
+
+	/* If temp is set, it means we switched buffers */
+	if (temp && serial->write_data) {
+		res = serial->write_data(serial);
+		if (res >= 0)
+			serial->tx_urb_used = 1;
+	}
+out:
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+/* make a request (for reading and writing data to muxed serial port) */
+static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
+			      struct urb *ctrl_urb,
+			      struct usb_ctrlrequest *ctrl_req,
+			      u8 *ctrl_urb_data, u32 size)
+{
+	int result;
+	int pipe;
+
+	/* Sanity check */
+	if (!serial || !ctrl_urb || !ctrl_req) {
+		printk(KERN_ERR "%s: Wrong arguments\n", __func__);
+		return -EINVAL;
+	}
+
+	/* initialize */
+	ctrl_req->wValue = 0;
+	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+	ctrl_req->wLength = cpu_to_le16(size);
+
+	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
+		/* Reading command */
+		ctrl_req->bRequestType = USB_DIR_IN |
+					 USB_TYPE_OPTION_VENDOR |
+					 USB_RECIP_INTERFACE;
+		ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+		pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
+	} else {
+		/* Writing command */
+		ctrl_req->bRequestType = USB_DIR_OUT |
+					 USB_TYPE_OPTION_VENDOR |
+					 USB_RECIP_INTERFACE;
+		ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+		pipe = usb_sndctrlpipe(serial->parent->usb, 0);
+	}
+	/* syslog */
+	D2("%s command (%02x) len: %d, port: %d",
+	   type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
+	   ctrl_req->bRequestType, ctrl_req->wLength, port);
+
+	/* Load ctrl urb */
+	ctrl_urb->transfer_flags = 0;
+	usb_fill_control_urb(ctrl_urb,
+			     serial->parent->usb,
+			     pipe,
+			     (u8 *) ctrl_req,
+			     ctrl_urb_data, size, ctrl_callback, serial);
+	/* Send it on merry way */
+	result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
+	if (result) {
+		dev_err(&ctrl_urb->dev->dev,
+			"%s failed submit ctrl_urb %d type %d\n", __func__,
+			result, type);
+		return result;
+	}
+
+	/* done */
+	return size;
+}
+
+/* called by intr_callback when read occurs */
+static int hso_mux_serial_read(struct hso_serial *serial)
+{
+	if (!serial)
+		return -EINVAL;
+
+	/* clean data */
+	memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
+	/* make the request */
+
+	if (serial->num_rx_urbs != 1) {
+		dev_err(&serial->parent->interface->dev,
+			"ERROR: mux'd reads with multiple buffers "
+			"not possible\n");
+		return 0;
+	}
+	return mux_device_request(serial,
+				  USB_CDC_GET_ENCAPSULATED_RESPONSE,
+				  serial->parent->port_spec & HSO_PORT_MASK,
+				  serial->rx_urb[0],
+				  &serial->ctrl_req_rx,
+				  serial->rx_data[0], serial->rx_data_length);
+}
+
+/* used for muxed serial port callback (muxed serial read) */
+static void intr_callback(struct urb *urb)
+{
+	struct hso_shared_int *shared_int = urb->context;
+	struct hso_serial *serial;
+	unsigned char *port_req;
+	int status = urb->status;
+	int i;
+
+	usb_mark_last_busy(urb->dev);
+
+	/* sanity check */
+	if (!shared_int)
+		return;
+
+	/* status check */
+	if (status) {
+		handle_usb_error(status, __func__, NULL);
+		return;
+	}
+	D4("\n--- Got intr callback 0x%02X ---", status);
+
+	/* what request? */
+	port_req = urb->transfer_buffer;
+	D4(" port_req = 0x%.2X\n", *port_req);
+	/* loop over all muxed ports to find the one sending this */
+	for (i = 0; i < 8; i++) {
+		/* max 8 channels on MUX */
+		if (*port_req & (1 << i)) {
+			serial = get_serial_by_shared_int_and_type(shared_int,
+								   (1 << i));
+			if (serial != NULL) {
+				D1("Pending read interrupt on port %d\n", i);
+				spin_lock(&serial->serial_lock);
+				if (serial->rx_state == RX_IDLE &&
+					atomic_read(&serial->port.count) > 0) {
+					/* Setup and send a ctrl req read on
+					 * port i */
+					if (!serial->rx_urb_filled[0]) {
+						serial->rx_state = RX_SENT;
+						hso_mux_serial_read(serial);
+					} else
+						serial->rx_state = RX_PENDING;
+				} else {
+					D1("Already a read pending on "
+					   "port %d or port not open\n", i);
+				}
+				spin_unlock(&serial->serial_lock);
+			}
+		}
+	}
+	/* Resubmit interrupt urb */
+	hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
+}
+
+/* called for writing to muxed serial port */
+static int hso_mux_serial_write_data(struct hso_serial *serial)
+{
+	if (NULL == serial)
+		return -EINVAL;
+
+	return mux_device_request(serial,
+				  USB_CDC_SEND_ENCAPSULATED_COMMAND,
+				  serial->parent->port_spec & HSO_PORT_MASK,
+				  serial->tx_urb,
+				  &serial->ctrl_req_tx,
+				  serial->tx_data, serial->tx_data_count);
+}
+
+/* write callback for Diag and CS port */
+static void hso_std_serial_write_bulk_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	int status = urb->status;
+
+	/* sanity check */
+	if (!serial) {
+		D1("serial == NULL");
+		return;
+	}
+
+	spin_lock(&serial->serial_lock);
+	serial->tx_urb_used = 0;
+	spin_unlock(&serial->serial_lock);
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+	hso_put_activity(serial->parent);
+	tty_port_tty_wakeup(&serial->port);
+	hso_kick_transmit(serial);
+
+	D1(" ");
+}
+
+/* called for writing diag or CS serial port */
+static int hso_std_serial_write_data(struct hso_serial *serial)
+{
+	int count = serial->tx_data_count;
+	int result;
+
+	usb_fill_bulk_urb(serial->tx_urb,
+			  serial->parent->usb,
+			  usb_sndbulkpipe(serial->parent->usb,
+					  serial->out_endp->
+					  bEndpointAddress & 0x7F),
+			  serial->tx_data, serial->tx_data_count,
+			  hso_std_serial_write_bulk_callback, serial);
+
+	result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
+	if (result) {
+		dev_warn(&serial->parent->usb->dev,
+			 "Failed to submit urb - res %d\n", result);
+		return result;
+	}
+
+	return count;
+}
+
+/* callback after read or write on muxed serial port */
+static void ctrl_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	struct usb_ctrlrequest *req;
+	int status = urb->status;
+
+	/* sanity check */
+	if (!serial)
+		return;
+
+	spin_lock(&serial->serial_lock);
+	serial->tx_urb_used = 0;
+	spin_unlock(&serial->serial_lock);
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+
+	/* what request? */
+	req = (struct usb_ctrlrequest *)(urb->setup_packet);
+	D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
+	D4("Actual length of urb = %d\n", urb->actual_length);
+	DUMP1(urb->transfer_buffer, urb->actual_length);
+
+	if (req->bRequestType ==
+	    (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
+		/* response to a read command */
+		serial->rx_urb_filled[0] = 1;
+		spin_lock(&serial->serial_lock);
+		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
+		spin_unlock(&serial->serial_lock);
+	} else {
+		hso_put_activity(serial->parent);
+		tty_port_tty_wakeup(&serial->port);
+		/* response to a write command */
+		hso_kick_transmit(serial);
+	}
+}
+
+/* handle RX data for serial port */
+static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
+{
+	struct tty_struct *tty;
+	int count;
+
+	/* Sanity check */
+	if (urb == NULL || serial == NULL) {
+		D1("serial = NULL");
+		return -2;
+	}
+
+	tty = tty_port_tty_get(&serial->port);
+
+	if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
+		tty_kref_put(tty);
+		return -1;
+	}
+
+	/* Push data to tty */
+	D1("data to push to tty");
+	count = tty_buffer_request_room(&serial->port, urb->actual_length);
+	if (count >= urb->actual_length) {
+		tty_insert_flip_string(&serial->port, urb->transfer_buffer,
+				       urb->actual_length);
+		tty_flip_buffer_push(&serial->port);
+	} else {
+		dev_warn(&serial->parent->usb->dev,
+			 "dropping data, %d bytes lost\n", urb->actual_length);
+	}
+
+	tty_kref_put(tty);
+
+	serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
+
+	return 0;
+}
+
+
+/* Base driver functions */
+
+static void hso_log_port(struct hso_device *hso_dev)
+{
+	char *port_type;
+	char port_dev[20];
+
+	switch (hso_dev->port_spec & HSO_PORT_MASK) {
+	case HSO_PORT_CONTROL:
+		port_type = "Control";
+		break;
+	case HSO_PORT_APP:
+		port_type = "Application";
+		break;
+	case HSO_PORT_GPS:
+		port_type = "GPS";
+		break;
+	case HSO_PORT_GPS_CONTROL:
+		port_type = "GPS control";
+		break;
+	case HSO_PORT_APP2:
+		port_type = "Application2";
+		break;
+	case HSO_PORT_PCSC:
+		port_type = "PCSC";
+		break;
+	case HSO_PORT_DIAG:
+		port_type = "Diagnostic";
+		break;
+	case HSO_PORT_DIAG2:
+		port_type = "Diagnostic2";
+		break;
+	case HSO_PORT_MODEM:
+		port_type = "Modem";
+		break;
+	case HSO_PORT_NETWORK:
+		port_type = "Network";
+		break;
+	default:
+		port_type = "Unknown";
+		break;
+	}
+	if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+		sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
+	} else
+		sprintf(port_dev, "/dev/%s%d", tty_filename,
+			dev2ser(hso_dev)->minor);
+
+	dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
+		port_type, port_dev);
+}
+
+static int hso_start_net_device(struct hso_device *hso_dev)
+{
+	int i, result = 0;
+	struct hso_net *hso_net = dev2net(hso_dev);
+
+	if (!hso_net)
+		return -ENODEV;
+
+	/* send URBs for all read buffers */
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+
+		/* Prep a receive URB */
+		usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
+				  hso_dev->usb,
+				  usb_rcvbulkpipe(hso_dev->usb,
+						  hso_net->in_endp->
+						  bEndpointAddress & 0x7F),
+				  hso_net->mux_bulk_rx_buf_pool[i],
+				  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
+				  hso_net);
+
+		/* Put it out there so the device can send us stuff */
+		result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
+					GFP_NOIO);
+		if (result)
+			dev_warn(&hso_dev->usb->dev,
+				"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
+				i, result);
+	}
+
+	return result;
+}
+
+static int hso_stop_net_device(struct hso_device *hso_dev)
+{
+	int i;
+	struct hso_net *hso_net = dev2net(hso_dev);
+
+	if (!hso_net)
+		return -ENODEV;
+
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		if (hso_net->mux_bulk_rx_urb_pool[i])
+			usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+
+	}
+	if (hso_net->mux_bulk_tx_urb)
+		usb_kill_urb(hso_net->mux_bulk_tx_urb);
+
+	return 0;
+}
+
+static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
+{
+	int i, result = 0;
+	struct hso_serial *serial = dev2ser(hso_dev);
+
+	if (!serial)
+		return -ENODEV;
+
+	/* If it is not the MUX port fill in and submit a bulk urb (already
+	 * allocated in hso_serial_start) */
+	if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
+		for (i = 0; i < serial->num_rx_urbs; i++) {
+			usb_fill_bulk_urb(serial->rx_urb[i],
+					  serial->parent->usb,
+					  usb_rcvbulkpipe(serial->parent->usb,
+							  serial->in_endp->
+							  bEndpointAddress &
+							  0x7F),
+					  serial->rx_data[i],
+					  serial->rx_data_length,
+					  hso_std_serial_read_bulk_callback,
+					  serial);
+			result = usb_submit_urb(serial->rx_urb[i], flags);
+			if (result) {
+				dev_warn(&serial->parent->usb->dev,
+					 "Failed to submit urb - res %d\n",
+					 result);
+				break;
+			}
+		}
+	} else {
+		mutex_lock(&serial->shared_int->shared_int_lock);
+		if (!serial->shared_int->use_count) {
+			result =
+			    hso_mux_submit_intr_urb(serial->shared_int,
+						    hso_dev->usb, flags);
+		}
+		serial->shared_int->use_count++;
+		mutex_unlock(&serial->shared_int->shared_int_lock);
+	}
+	if (serial->tiocmget)
+		tiocmget_submit_urb(serial,
+				    serial->tiocmget,
+				    serial->parent->usb);
+	return result;
+}
+
+static int hso_stop_serial_device(struct hso_device *hso_dev)
+{
+	int i;
+	struct hso_serial *serial = dev2ser(hso_dev);
+	struct hso_tiocmget  *tiocmget;
+
+	if (!serial)
+		return -ENODEV;
+
+	for (i = 0; i < serial->num_rx_urbs; i++) {
+		if (serial->rx_urb[i]) {
+			usb_kill_urb(serial->rx_urb[i]);
+			serial->rx_urb_filled[i] = 0;
+		}
+	}
+	serial->curr_rx_urb_idx = 0;
+
+	if (serial->tx_urb)
+		usb_kill_urb(serial->tx_urb);
+
+	if (serial->shared_int) {
+		mutex_lock(&serial->shared_int->shared_int_lock);
+		if (serial->shared_int->use_count &&
+		    (--serial->shared_int->use_count == 0)) {
+			struct urb *urb;
+
+			urb = serial->shared_int->shared_intr_urb;
+			if (urb)
+				usb_kill_urb(urb);
+		}
+		mutex_unlock(&serial->shared_int->shared_int_lock);
+	}
+	tiocmget = serial->tiocmget;
+	if (tiocmget) {
+		wake_up_interruptible(&tiocmget->waitq);
+		usb_kill_urb(tiocmget->urb);
+	}
+
+	return 0;
+}
+
+static void hso_serial_tty_unregister(struct hso_serial *serial)
+{
+	tty_unregister_device(tty_drv, serial->minor);
+}
+
+static void hso_serial_common_free(struct hso_serial *serial)
+{
+	int i;
+
+	for (i = 0; i < serial->num_rx_urbs; i++) {
+		/* unlink and free RX URB */
+		usb_free_urb(serial->rx_urb[i]);
+		/* free the RX buffer */
+		kfree(serial->rx_data[i]);
+	}
+
+	/* unlink and free TX URB */
+	usb_free_urb(serial->tx_urb);
+	kfree(serial->tx_buffer);
+	kfree(serial->tx_data);
+	tty_port_destroy(&serial->port);
+}
+
+static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
+				    int rx_size, int tx_size)
+{
+	struct device *dev;
+	int minor;
+	int i;
+
+	tty_port_init(&serial->port);
+
+	minor = get_free_serial_index();
+	if (minor < 0)
+		goto exit;
+
+	/* register our minor number */
+	serial->parent->dev = tty_port_register_device_attr(&serial->port,
+			tty_drv, minor, &serial->parent->interface->dev,
+			serial->parent, hso_serial_dev_groups);
+	dev = serial->parent->dev;
+
+	/* fill in specific data for later use */
+	serial->minor = minor;
+	serial->magic = HSO_SERIAL_MAGIC;
+	spin_lock_init(&serial->serial_lock);
+	serial->num_rx_urbs = num_urbs;
+
+	/* RX, allocate urb and initialize */
+
+	/* prepare our RX buffer */
+	serial->rx_data_length = rx_size;
+	for (i = 0; i < serial->num_rx_urbs; i++) {
+		serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!serial->rx_urb[i]) {
+			dev_err(dev, "Could not allocate urb?\n");
+			goto exit;
+		}
+		serial->rx_urb[i]->transfer_buffer = NULL;
+		serial->rx_urb[i]->transfer_buffer_length = 0;
+		serial->rx_data[i] = kzalloc(serial->rx_data_length,
+					     GFP_KERNEL);
+		if (!serial->rx_data[i])
+			goto exit;
+	}
+
+	/* TX, allocate urb and initialize */
+	serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!serial->tx_urb) {
+		dev_err(dev, "Could not allocate urb?\n");
+		goto exit;
+	}
+	serial->tx_urb->transfer_buffer = NULL;
+	serial->tx_urb->transfer_buffer_length = 0;
+	/* prepare our TX buffer */
+	serial->tx_data_count = 0;
+	serial->tx_buffer_count = 0;
+	serial->tx_data_length = tx_size;
+	serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
+	if (!serial->tx_data)
+		goto exit;
+
+	serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
+	if (!serial->tx_buffer)
+		goto exit;
+
+	return 0;
+exit:
+	hso_serial_tty_unregister(serial);
+	hso_serial_common_free(serial);
+	return -1;
+}
+
+/* Creates a general hso device */
+static struct hso_device *hso_create_device(struct usb_interface *intf,
+					    int port_spec)
+{
+	struct hso_device *hso_dev;
+
+	hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
+	if (!hso_dev)
+		return NULL;
+
+	hso_dev->port_spec = port_spec;
+	hso_dev->usb = interface_to_usbdev(intf);
+	hso_dev->interface = intf;
+	kref_init(&hso_dev->ref);
+	mutex_init(&hso_dev->mutex);
+
+	INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
+	INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
+
+	return hso_dev;
+}
+
+/* Removes a network device in the network device table */
+static int remove_net_device(struct hso_device *hso_dev)
+{
+	int i;
+
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] == hso_dev) {
+			network_table[i] = NULL;
+			break;
+		}
+	}
+	if (i == HSO_MAX_NET_DEVICES)
+		return -1;
+	return 0;
+}
+
+/* Frees our network device */
+static void hso_free_net_device(struct hso_device *hso_dev)
+{
+	int i;
+	struct hso_net *hso_net = dev2net(hso_dev);
+
+	if (!hso_net)
+		return;
+
+	remove_net_device(hso_net->parent);
+
+	if (hso_net->net)
+		unregister_netdev(hso_net->net);
+
+	/* start freeing */
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
+		hso_net->mux_bulk_rx_buf_pool[i] = NULL;
+	}
+	usb_free_urb(hso_net->mux_bulk_tx_urb);
+	kfree(hso_net->mux_bulk_tx_buf);
+	hso_net->mux_bulk_tx_buf = NULL;
+
+	if (hso_net->net)
+		free_netdev(hso_net->net);
+
+	kfree(hso_dev);
+}
+
+static const struct net_device_ops hso_netdev_ops = {
+	.ndo_open	= hso_net_open,
+	.ndo_stop	= hso_net_close,
+	.ndo_start_xmit = hso_net_start_xmit,
+	.ndo_tx_timeout = hso_net_tx_timeout,
+};
+
+/* initialize the network interface */
+static void hso_net_init(struct net_device *net)
+{
+	struct hso_net *hso_net = netdev_priv(net);
+
+	D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
+
+	/* fill in the other fields */
+	net->netdev_ops = &hso_netdev_ops;
+	net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
+	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+	net->type = ARPHRD_NONE;
+	net->mtu = DEFAULT_MTU - 14;
+	net->tx_queue_len = 10;
+	net->ethtool_ops = &ops;
+
+	/* and initialize the semaphore */
+	spin_lock_init(&hso_net->net_lock);
+}
+
+/* Adds a network device in the network device table */
+static int add_net_device(struct hso_device *hso_dev)
+{
+	int i;
+
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] == NULL) {
+			network_table[i] = hso_dev;
+			break;
+		}
+	}
+	if (i == HSO_MAX_NET_DEVICES)
+		return -1;
+	return 0;
+}
+
+static int hso_rfkill_set_block(void *data, bool blocked)
+{
+	struct hso_device *hso_dev = data;
+	int enabled = !blocked;
+	int rv;
+
+	mutex_lock(&hso_dev->mutex);
+	if (hso_dev->usb_gone)
+		rv = 0;
+	else
+		rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
+				       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
+				       USB_CTRL_SET_TIMEOUT);
+	mutex_unlock(&hso_dev->mutex);
+	return rv;
+}
+
+static const struct rfkill_ops hso_rfkill_ops = {
+	.set_block = hso_rfkill_set_block,
+};
+
+/* Creates and sets up everything for rfkill */
+static void hso_create_rfkill(struct hso_device *hso_dev,
+			     struct usb_interface *interface)
+{
+	struct hso_net *hso_net = dev2net(hso_dev);
+	struct device *dev = &hso_net->net->dev;
+	static u32 rfkill_counter;
+
+	snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d",
+		 rfkill_counter++);
+
+	hso_net->rfkill = rfkill_alloc(hso_net->name,
+				       &interface_to_usbdev(interface)->dev,
+				       RFKILL_TYPE_WWAN,
+				       &hso_rfkill_ops, hso_dev);
+	if (!hso_net->rfkill) {
+		dev_err(dev, "%s - Out of memory\n", __func__);
+		return;
+	}
+	if (rfkill_register(hso_net->rfkill) < 0) {
+		rfkill_destroy(hso_net->rfkill);
+		hso_net->rfkill = NULL;
+		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
+		return;
+	}
+}
+
+static struct device_type hso_type = {
+	.name	= "wwan",
+};
+
+/* Creates our network device */
+static struct hso_device *hso_create_net_device(struct usb_interface *interface,
+						int port_spec)
+{
+	int result, i;
+	struct net_device *net;
+	struct hso_net *hso_net;
+	struct hso_device *hso_dev;
+
+	hso_dev = hso_create_device(interface, port_spec);
+	if (!hso_dev)
+		return NULL;
+
+	/* allocate our network device, then we can put in our private data */
+	/* call hso_net_init to do the basic initialization */
+	net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
+			   hso_net_init);
+	if (!net) {
+		dev_err(&interface->dev, "Unable to create ethernet device\n");
+		goto exit;
+	}
+
+	hso_net = netdev_priv(net);
+
+	hso_dev->port_data.dev_net = hso_net;
+	hso_net->net = net;
+	hso_net->parent = hso_dev;
+
+	hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+				      USB_DIR_IN);
+	if (!hso_net->in_endp) {
+		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
+		goto exit;
+	}
+	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+				       USB_DIR_OUT);
+	if (!hso_net->out_endp) {
+		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
+		goto exit;
+	}
+	SET_NETDEV_DEV(net, &interface->dev);
+	SET_NETDEV_DEVTYPE(net, &hso_type);
+
+	/* registering our net device */
+	result = register_netdev(net);
+	if (result) {
+		dev_err(&interface->dev, "Failed to register device\n");
+		goto exit;
+	}
+
+	/* start allocating */
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!hso_net->mux_bulk_rx_urb_pool[i]) {
+			dev_err(&interface->dev, "Could not allocate rx urb\n");
+			goto exit;
+		}
+		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
+							   GFP_KERNEL);
+		if (!hso_net->mux_bulk_rx_buf_pool[i])
+			goto exit;
+	}
+	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!hso_net->mux_bulk_tx_urb) {
+		dev_err(&interface->dev, "Could not allocate tx urb\n");
+		goto exit;
+	}
+	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
+	if (!hso_net->mux_bulk_tx_buf)
+		goto exit;
+
+	add_net_device(hso_dev);
+
+	hso_log_port(hso_dev);
+
+	hso_create_rfkill(hso_dev, interface);
+
+	return hso_dev;
+exit:
+	hso_free_net_device(hso_dev);
+	return NULL;
+}
+
+static void hso_free_tiomget(struct hso_serial *serial)
+{
+	struct hso_tiocmget *tiocmget;
+	if (!serial)
+		return;
+	tiocmget = serial->tiocmget;
+	if (tiocmget) {
+		usb_free_urb(tiocmget->urb);
+		tiocmget->urb = NULL;
+		serial->tiocmget = NULL;
+		kfree(tiocmget);
+	}
+}
+
+/* Frees an AT channel ( goes for both mux and non-mux ) */
+static void hso_free_serial_device(struct hso_device *hso_dev)
+{
+	struct hso_serial *serial = dev2ser(hso_dev);
+
+	if (!serial)
+		return;
+
+	hso_serial_common_free(serial);
+
+	if (serial->shared_int) {
+		mutex_lock(&serial->shared_int->shared_int_lock);
+		if (--serial->shared_int->ref_count == 0)
+			hso_free_shared_int(serial->shared_int);
+		else
+			mutex_unlock(&serial->shared_int->shared_int_lock);
+	}
+	hso_free_tiomget(serial);
+	kfree(serial);
+	kfree(hso_dev);
+}
+
+/* Creates a bulk AT channel */
+static struct hso_device *hso_create_bulk_serial_device(
+			struct usb_interface *interface, int port)
+{
+	struct hso_device *hso_dev;
+	struct hso_serial *serial;
+	int num_urbs;
+	struct hso_tiocmget *tiocmget;
+
+	hso_dev = hso_create_device(interface, port);
+	if (!hso_dev)
+		return NULL;
+
+	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+	if (!serial)
+		goto exit;
+
+	serial->parent = hso_dev;
+	hso_dev->port_data.dev_serial = serial;
+
+	if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
+		num_urbs = 2;
+		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
+					   GFP_KERNEL);
+		/* it isn't going to break our heart if serial->tiocmget
+		 *  allocation fails don't bother checking this.
+		 */
+		if (serial->tiocmget) {
+			tiocmget = serial->tiocmget;
+			tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
+			if (tiocmget->urb) {
+				mutex_init(&tiocmget->mutex);
+				init_waitqueue_head(&tiocmget->waitq);
+				tiocmget->endp = hso_get_ep(
+					interface,
+					USB_ENDPOINT_XFER_INT,
+					USB_DIR_IN);
+			} else
+				hso_free_tiomget(serial);
+		}
+	}
+	else
+		num_urbs = 1;
+
+	if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
+				     BULK_URB_TX_SIZE))
+		goto exit;
+
+	serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+				     USB_DIR_IN);
+	if (!serial->in_endp) {
+		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
+		goto exit2;
+	}
+
+	if (!
+	    (serial->out_endp =
+	     hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
+		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
+		goto exit2;
+	}
+
+	serial->write_data = hso_std_serial_write_data;
+
+	/* and record this serial */
+	set_serial_by_index(serial->minor, serial);
+
+	/* setup the proc dirs and files if needed */
+	hso_log_port(hso_dev);
+
+	/* done, return it */
+	return hso_dev;
+
+exit2:
+	hso_serial_tty_unregister(serial);
+	hso_serial_common_free(serial);
+exit:
+	hso_free_tiomget(serial);
+	kfree(serial);
+	kfree(hso_dev);
+	return NULL;
+}
+
+/* Creates a multiplexed AT channel */
+static
+struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
+						int port,
+						struct hso_shared_int *mux)
+{
+	struct hso_device *hso_dev;
+	struct hso_serial *serial;
+	int port_spec;
+
+	port_spec = HSO_INTF_MUX;
+	port_spec &= ~HSO_PORT_MASK;
+
+	port_spec |= hso_mux_to_port(port);
+	if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
+		return NULL;
+
+	hso_dev = hso_create_device(interface, port_spec);
+	if (!hso_dev)
+		return NULL;
+
+	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+	if (!serial)
+		goto exit;
+
+	hso_dev->port_data.dev_serial = serial;
+	serial->parent = hso_dev;
+
+	if (hso_serial_common_create
+	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
+		goto exit;
+
+	serial->tx_data_length--;
+	serial->write_data = hso_mux_serial_write_data;
+
+	serial->shared_int = mux;
+	mutex_lock(&serial->shared_int->shared_int_lock);
+	serial->shared_int->ref_count++;
+	mutex_unlock(&serial->shared_int->shared_int_lock);
+
+	/* and record this serial */
+	set_serial_by_index(serial->minor, serial);
+
+	/* setup the proc dirs and files if needed */
+	hso_log_port(hso_dev);
+
+	/* done, return it */
+	return hso_dev;
+
+exit:
+	if (serial) {
+		tty_unregister_device(tty_drv, serial->minor);
+		kfree(serial);
+	}
+	kfree(hso_dev);
+	return NULL;
+
+}
+
+static void hso_free_shared_int(struct hso_shared_int *mux)
+{
+	usb_free_urb(mux->shared_intr_urb);
+	kfree(mux->shared_intr_buf);
+	mutex_unlock(&mux->shared_int_lock);
+	kfree(mux);
+}
+
+static
+struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
+{
+	struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+
+	if (!mux)
+		return NULL;
+
+	mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
+				    USB_DIR_IN);
+	if (!mux->intr_endp) {
+		dev_err(&interface->dev, "Can't find INT IN endpoint\n");
+		goto exit;
+	}
+
+	mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!mux->shared_intr_urb) {
+		dev_err(&interface->dev, "Could not allocate intr urb?\n");
+		goto exit;
+	}
+	mux->shared_intr_buf =
+		kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
+			GFP_KERNEL);
+	if (!mux->shared_intr_buf)
+		goto exit;
+
+	mutex_init(&mux->shared_int_lock);
+
+	return mux;
+
+exit:
+	kfree(mux->shared_intr_buf);
+	usb_free_urb(mux->shared_intr_urb);
+	kfree(mux);
+	return NULL;
+}
+
+/* Gets the port spec for a certain interface */
+static int hso_get_config_data(struct usb_interface *interface)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	u8 *config_data = kmalloc(17, GFP_KERNEL);
+	u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+	s32 result;
+
+	if (!config_data)
+		return -ENOMEM;
+	if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+			    0x86, 0xC0, 0, 0, config_data, 17,
+			    USB_CTRL_SET_TIMEOUT) != 0x11) {
+		kfree(config_data);
+		return -EIO;
+	}
+
+	switch (config_data[if_num]) {
+	case 0x0:
+		result = 0;
+		break;
+	case 0x1:
+		result = HSO_PORT_DIAG;
+		break;
+	case 0x2:
+		result = HSO_PORT_GPS;
+		break;
+	case 0x3:
+		result = HSO_PORT_GPS_CONTROL;
+		break;
+	case 0x4:
+		result = HSO_PORT_APP;
+		break;
+	case 0x5:
+		result = HSO_PORT_APP2;
+		break;
+	case 0x6:
+		result = HSO_PORT_CONTROL;
+		break;
+	case 0x7:
+		result = HSO_PORT_NETWORK;
+		break;
+	case 0x8:
+		result = HSO_PORT_MODEM;
+		break;
+	case 0x9:
+		result = HSO_PORT_MSD;
+		break;
+	case 0xa:
+		result = HSO_PORT_PCSC;
+		break;
+	case 0xb:
+		result = HSO_PORT_VOICE;
+		break;
+	default:
+		result = 0;
+	}
+
+	if (result)
+		result |= HSO_INTF_BULK;
+
+	if (config_data[16] & 0x1)
+		result |= HSO_INFO_CRC_BUG;
+
+	kfree(config_data);
+	return result;
+}
+
+/* called once for each interface upon device insertion */
+static int hso_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	int mux, i, if_num, port_spec;
+	unsigned char port_mask;
+	struct hso_device *hso_dev = NULL;
+	struct hso_shared_int *shared_int;
+	struct hso_device *tmp_dev = NULL;
+
+	if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
+		dev_err(&interface->dev, "Not our interface\n");
+		return -ENODEV;
+	}
+
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* Get the interface/port specification from either driver_info or from
+	 * the device itself */
+	if (id->driver_info)
+		port_spec = ((u32 *)(id->driver_info))[if_num];
+	else
+		port_spec = hso_get_config_data(interface);
+
+	/* Check if we need to switch to alt interfaces prior to port
+	 * configuration */
+	if (interface->num_altsetting > 1)
+		usb_set_interface(interface_to_usbdev(interface), if_num, 1);
+	interface->needs_remote_wakeup = 1;
+
+	/* Allocate new hso device(s) */
+	switch (port_spec & HSO_INTF_MASK) {
+	case HSO_INTF_MUX:
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			/* Create the network device */
+			if (!disable_net) {
+				hso_dev = hso_create_net_device(interface,
+								port_spec);
+				if (!hso_dev)
+					goto exit;
+				tmp_dev = hso_dev;
+			}
+		}
+
+		if (hso_get_mux_ports(interface, &port_mask))
+			/* TODO: de-allocate everything */
+			goto exit;
+
+		shared_int = hso_create_shared_int(interface);
+		if (!shared_int)
+			goto exit;
+
+		for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
+			if (port_mask & i) {
+				hso_dev = hso_create_mux_serial_device(
+						interface, i, shared_int);
+				if (!hso_dev)
+					goto exit;
+			}
+		}
+
+		if (tmp_dev)
+			hso_dev = tmp_dev;
+		break;
+
+	case HSO_INTF_BULK:
+		/* It's a regular bulk interface */
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			if (!disable_net)
+				hso_dev =
+				    hso_create_net_device(interface, port_spec);
+		} else {
+			hso_dev =
+			    hso_create_bulk_serial_device(interface, port_spec);
+		}
+		if (!hso_dev)
+			goto exit;
+		break;
+	default:
+		goto exit;
+	}
+
+	/* save our data pointer in this device */
+	usb_set_intfdata(interface, hso_dev);
+
+	/* done */
+	return 0;
+exit:
+	hso_free_interface(interface);
+	return -ENODEV;
+}
+
+/* device removed, cleaning up */
+static void hso_disconnect(struct usb_interface *interface)
+{
+	hso_free_interface(interface);
+
+	/* remove reference of our private data */
+	usb_set_intfdata(interface, NULL);
+}
+
+static void async_get_intf(struct work_struct *data)
+{
+	struct hso_device *hso_dev =
+	    container_of(data, struct hso_device, async_get_intf);
+	usb_autopm_get_interface(hso_dev->interface);
+}
+
+static void async_put_intf(struct work_struct *data)
+{
+	struct hso_device *hso_dev =
+	    container_of(data, struct hso_device, async_put_intf);
+	usb_autopm_put_interface(hso_dev->interface);
+}
+
+static int hso_get_activity(struct hso_device *hso_dev)
+{
+	if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
+		if (!hso_dev->is_active) {
+			hso_dev->is_active = 1;
+			schedule_work(&hso_dev->async_get_intf);
+		}
+	}
+
+	if (hso_dev->usb->state != USB_STATE_CONFIGURED)
+		return -EAGAIN;
+
+	usb_mark_last_busy(hso_dev->usb);
+
+	return 0;
+}
+
+static int hso_put_activity(struct hso_device *hso_dev)
+{
+	if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
+		if (hso_dev->is_active) {
+			hso_dev->is_active = 0;
+			schedule_work(&hso_dev->async_put_intf);
+			return -EAGAIN;
+		}
+	}
+	hso_dev->is_active = 0;
+	return 0;
+}
+
+/* called by kernel when we need to suspend device */
+static int hso_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	int i, result;
+
+	/* Stop all serial ports */
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] && (serial_table[i]->interface == iface)) {
+			result = hso_stop_serial_device(serial_table[i]);
+			if (result)
+				goto out;
+		}
+	}
+
+	/* Stop all network ports */
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == iface)) {
+			result = hso_stop_net_device(network_table[i]);
+			if (result)
+				goto out;
+		}
+	}
+
+out:
+	return 0;
+}
+
+/* called by kernel when we need to resume device */
+static int hso_resume(struct usb_interface *iface)
+{
+	int i, result = 0;
+	struct hso_net *hso_net;
+
+	/* Start all serial ports */
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] && (serial_table[i]->interface == iface)) {
+			if (atomic_read(&dev2ser(serial_table[i])->port.count)) {
+				result =
+				    hso_start_serial_device(serial_table[i], GFP_NOIO);
+				hso_kick_transmit(dev2ser(serial_table[i]));
+				if (result)
+					goto out;
+			}
+		}
+	}
+
+	/* Start all network ports */
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == iface)) {
+			hso_net = dev2net(network_table[i]);
+			if (hso_net->flags & IFF_UP) {
+				/* First transmit any lingering data,
+				   then restart the device. */
+				if (hso_net->skb_tx_buf) {
+					dev_dbg(&iface->dev,
+						"Transmitting"
+						" lingering data\n");
+					hso_net_start_xmit(hso_net->skb_tx_buf,
+							   hso_net->net);
+					hso_net->skb_tx_buf = NULL;
+				}
+				result = hso_start_net_device(network_table[i]);
+				if (result)
+					goto out;
+			}
+		}
+	}
+
+out:
+	return result;
+}
+
+static void hso_serial_ref_free(struct kref *ref)
+{
+	struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
+
+	hso_free_serial_device(hso_dev);
+}
+
+static void hso_free_interface(struct usb_interface *interface)
+{
+	struct hso_serial *serial;
+	int i;
+
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] &&
+		    (serial_table[i]->interface == interface)) {
+			serial = dev2ser(serial_table[i]);
+			tty_port_tty_hangup(&serial->port, false);
+			mutex_lock(&serial->parent->mutex);
+			serial->parent->usb_gone = 1;
+			mutex_unlock(&serial->parent->mutex);
+			cancel_work_sync(&serial_table[i]->async_put_intf);
+			cancel_work_sync(&serial_table[i]->async_get_intf);
+			hso_serial_tty_unregister(serial);
+			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
+			set_serial_by_index(i, NULL);
+		}
+	}
+
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == interface)) {
+			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
+			/* hso_stop_net_device doesn't stop the net queue since
+			 * traffic needs to start it again when suspended */
+			netif_stop_queue(dev2net(network_table[i])->net);
+			hso_stop_net_device(network_table[i]);
+			cancel_work_sync(&network_table[i]->async_put_intf);
+			cancel_work_sync(&network_table[i]->async_get_intf);
+			if (rfk) {
+				rfkill_unregister(rfk);
+				rfkill_destroy(rfk);
+			}
+			hso_free_net_device(network_table[i]);
+		}
+	}
+}
+
+/* Helper functions */
+
+/* Get the endpoint ! */
+static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
+						  int type, int dir)
+{
+	int i;
+	struct usb_host_interface *iface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endp;
+
+	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+		endp = &iface->endpoint[i].desc;
+		if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
+		    (usb_endpoint_type(endp) == type))
+			return endp;
+	}
+
+	return NULL;
+}
+
+/* Get the byte that describes which ports are enabled */
+static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
+{
+	int i;
+	struct usb_host_interface *iface = intf->cur_altsetting;
+
+	if (iface->extralen == 3) {
+		*ports = iface->extra[2];
+		return 0;
+	}
+
+	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+		if (iface->endpoint[i].extralen == 3) {
+			*ports = iface->endpoint[i].extra[2];
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+/* interrupt urb needs to be submitted, used for serial read of muxed port */
+static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
+				   struct usb_device *usb, gfp_t gfp)
+{
+	int result;
+
+	usb_fill_int_urb(shared_int->shared_intr_urb, usb,
+			 usb_rcvintpipe(usb,
+				shared_int->intr_endp->bEndpointAddress & 0x7F),
+			 shared_int->shared_intr_buf,
+			 1,
+			 intr_callback, shared_int,
+			 shared_int->intr_endp->bInterval);
+
+	result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
+	if (result)
+		dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
+			result);
+
+	return result;
+}
+
+/* operations setup of the serial interface */
+static const struct tty_operations hso_serial_ops = {
+	.open = hso_serial_open,
+	.close = hso_serial_close,
+	.write = hso_serial_write,
+	.write_room = hso_serial_write_room,
+	.cleanup = hso_serial_cleanup,
+	.ioctl = hso_serial_ioctl,
+	.set_termios = hso_serial_set_termios,
+	.chars_in_buffer = hso_serial_chars_in_buffer,
+	.tiocmget = hso_serial_tiocmget,
+	.tiocmset = hso_serial_tiocmset,
+	.get_icount = hso_get_count,
+	.unthrottle = hso_unthrottle
+};
+
+static struct usb_driver hso_driver = {
+	.name = driver_name,
+	.probe = hso_probe,
+	.disconnect = hso_disconnect,
+	.id_table = hso_ids,
+	.suspend = hso_suspend,
+	.resume = hso_resume,
+	.reset_resume = hso_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+static int __init hso_init(void)
+{
+	int i;
+	int result;
+
+	/* put it in the log */
+	printk(KERN_INFO "hso: %s\n", version);
+
+	/* Initialise the serial table semaphore and table */
+	spin_lock_init(&serial_table_lock);
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
+		serial_table[i] = NULL;
+
+	/* allocate our driver using the proper amount of supported minors */
+	tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
+	if (!tty_drv)
+		return -ENOMEM;
+
+	/* fill in all needed values */
+	tty_drv->driver_name = driver_name;
+	tty_drv->name = tty_filename;
+
+	/* if major number is provided as parameter, use that one */
+	if (tty_major)
+		tty_drv->major = tty_major;
+
+	tty_drv->minor_start = 0;
+	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+	tty_drv->subtype = SERIAL_TYPE_NORMAL;
+	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_drv->init_termios = tty_std_termios;
+	hso_init_termios(&tty_drv->init_termios);
+	tty_set_operations(tty_drv, &hso_serial_ops);
+
+	/* register the tty driver */
+	result = tty_register_driver(tty_drv);
+	if (result) {
+		printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
+			__func__, result);
+		goto err_free_tty;
+	}
+
+	/* register this module as an usb driver */
+	result = usb_register(&hso_driver);
+	if (result) {
+		printk(KERN_ERR "Could not register hso driver? error: %d\n",
+			result);
+		goto err_unreg_tty;
+	}
+
+	/* done */
+	return 0;
+err_unreg_tty:
+	tty_unregister_driver(tty_drv);
+err_free_tty:
+	put_tty_driver(tty_drv);
+	return result;
+}
+
+static void __exit hso_exit(void)
+{
+	printk(KERN_INFO "hso: unloaded\n");
+
+	tty_unregister_driver(tty_drv);
+	put_tty_driver(tty_drv);
+	/* deregister the usb driver */
+	usb_deregister(&hso_driver);
+}
+
+/* Module definitions */
+module_init(hso_init);
+module_exit(hso_exit);
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESCRIPTION);
+MODULE_LICENSE(MOD_LICENSE);
+
+/* change the debug level (eg: insmod hso.ko debug=0x04) */
+MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
+module_param(debug, int, S_IRUGO | S_IWUSR);
+
+/* set the major tty number (eg: insmod hso.ko tty_major=245) */
+MODULE_PARM_DESC(tty_major, "Set the major tty number");
+module_param(tty_major, int, S_IRUGO | S_IWUSR);
+
+/* disable network interface (eg: insmod hso.ko disable_net=1) */
+MODULE_PARM_DESC(disable_net, "Disable the network interface");
+module_param(disable_net, int, S_IRUGO | S_IWUSR);
diff -Naur backports-4.2.6-1.org/drivers/net/usb/huawei_cdc_ncm.c backports-4.2.6-1/drivers/net/usb/huawei_cdc_ncm.c
--- backports-4.2.6-1.org/drivers/net/usb/huawei_cdc_ncm.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/huawei_cdc_ncm.c	2016-06-28 14:35:17.981973887 +0200
@@ -0,0 +1,224 @@
+/* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as
+ * transport layer.
+ * Copyright (C) 2013	 Enrico Mioso <mrkiko.rs@gmail.com>
+ *
+ *
+ * ABSTRACT:
+ * This driver handles devices resembling the CDC NCM standard, but
+ * encapsulating another protocol inside it. An example are some Huawei 3G
+ * devices, exposing an embedded AT channel where you can set up the NCM
+ * connection.
+ * This code has been heavily inspired by the cdc_mbim.c driver, which is
+ * Copyright (c) 2012  Smith Micro Software, Inc.
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+#include <linux/usb/cdc_ncm.h>
+
+/* Driver data */
+struct huawei_cdc_ncm_state {
+	struct cdc_ncm_ctx *ctx;
+	atomic_t pmcount;
+	struct usb_driver *subdriver;
+	struct usb_interface *control;
+	struct usb_interface *data;
+};
+
+static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on)
+{
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	int rv;
+
+	if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) ||
+			(!on && atomic_dec_and_test(&drvstate->pmcount))) {
+		rv = usb_autopm_get_interface(usbnet_dev->intf);
+		usbnet_dev->intf->needs_remote_wakeup = on;
+		if (!rv)
+			usb_autopm_put_interface(usbnet_dev->intf);
+	}
+	return 0;
+}
+
+static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf,
+					   int status)
+{
+	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!usbnet_dev)
+		return 0;
+
+	return huawei_cdc_ncm_manage_power(usbnet_dev, status);
+}
+
+
+static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
+			       struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
+	int ret = -ENODEV;
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	int drvflags = 0;
+
+	/* altsetting should always be 1 for NCM devices - so we hard-coded
+	 * it here. Some huawei devices will need the NDP part of the NCM package to
+	 * be at the end of the frame.
+	 */
+	drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+	ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
+	if (ret)
+		goto err;
+
+	ctx = drvstate->ctx;
+
+	if (usbnet_dev->status)
+		/* The wMaxCommand buffer must be big enough to hold
+		 * any message from the modem. Experience has shown
+		 * that some replies are more than 256 bytes long
+		 */
+		subdriver = usb_cdc_wdm_register(ctx->control,
+						 &usbnet_dev->status->desc,
+						 1024, /* wMaxCommand */
+						 huawei_cdc_ncm_wdm_manage_power);
+	if (IS_ERR(subdriver)) {
+		ret = PTR_ERR(subdriver);
+		cdc_ncm_unbind(usbnet_dev, intf);
+		goto err;
+	}
+
+	/* Prevent usbnet from using the status descriptor */
+	usbnet_dev->status = NULL;
+
+	drvstate->subdriver = subdriver;
+
+err:
+	return ret;
+}
+
+static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev,
+				  struct usb_interface *intf)
+{
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	struct cdc_ncm_ctx *ctx = drvstate->ctx;
+
+	if (drvstate->subdriver && drvstate->subdriver->disconnect)
+		drvstate->subdriver->disconnect(ctx->control);
+	drvstate->subdriver = NULL;
+
+	cdc_ncm_unbind(usbnet_dev, intf);
+}
+
+static int huawei_cdc_ncm_suspend(struct usb_interface *intf,
+				  pm_message_t message)
+{
+	int ret = 0;
+	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	struct cdc_ncm_ctx *ctx = drvstate->ctx;
+
+	if (ctx == NULL) {
+		ret = -ENODEV;
+		goto error;
+	}
+
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0)
+		goto error;
+
+	if (intf == ctx->control &&
+		drvstate->subdriver &&
+		drvstate->subdriver->suspend)
+		ret = drvstate->subdriver->suspend(intf, message);
+	if (ret < 0)
+		usbnet_resume(intf);
+
+error:
+	return ret;
+}
+
+static int huawei_cdc_ncm_resume(struct usb_interface *intf)
+{
+	int ret = 0;
+	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	bool callsub;
+	struct cdc_ncm_ctx *ctx = drvstate->ctx;
+
+	/* should we call subdriver's resume function? */
+	callsub =
+		(intf == ctx->control &&
+		drvstate->subdriver &&
+		drvstate->subdriver->resume);
+
+	if (callsub)
+		ret = drvstate->subdriver->resume(intf);
+	if (ret < 0)
+		goto err;
+	ret = usbnet_resume(intf);
+	if (ret < 0 && callsub)
+		drvstate->subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+	return ret;
+}
+
+static const struct driver_info huawei_cdc_ncm_info = {
+	.description = "Huawei CDC NCM device",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+	.bind = huawei_cdc_ncm_bind,
+	.unbind = huawei_cdc_ncm_unbind,
+	.manage_power = huawei_cdc_ncm_manage_power,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+};
+
+static const struct usb_device_id huawei_cdc_ncm_devs[] = {
+	/* Huawei NCM devices disguised as vendor specific */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x03, 0x16),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+
+	/* Terminating entry */
+	{
+	},
+};
+MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs);
+
+static struct usb_driver huawei_cdc_ncm_driver = {
+	.name = "huawei_cdc_ncm",
+	.id_table = huawei_cdc_ncm_devs,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = huawei_cdc_ncm_suspend,
+	.resume = huawei_cdc_ncm_resume,
+	.reset_resume = huawei_cdc_ncm_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(huawei_cdc_ncm_driver);
+MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>");
+MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/int51x1.c backports-4.2.6-1/drivers/net/usb/int51x1.c
--- backports-4.2.6-1.org/drivers/net/usb/int51x1.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/int51x1.c	2016-06-28 14:35:17.985307220 +0200
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2009 Peter Holik
+ *
+ * Intellon usb PLC (Powerline Communications) usb net driver
+ *
+ * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
+ *
+ * Based on the work of Jan 'RedBully' Seiffert
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or.
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/slab.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+#define INT51X1_VENDOR_ID	0x09e1
+#define INT51X1_PRODUCT_ID	0x5121
+
+#define INT51X1_HEADER_SIZE	2	/* 2 byte header */
+
+#define PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define PACKET_TYPE_DIRECTED		(1 << 2)
+#define PACKET_TYPE_BROADCAST		(1 << 3)
+#define PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+#define SET_ETHERNET_PACKET_FILTER	0x43
+
+static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+
+	if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
+
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	int pack_len = skb->len;
+	int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	int need_tail = 0;
+	__le16 *len;
+
+	/* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */
+	if ((pack_with_header_len) < dev->maxpacket)
+		need_tail = dev->maxpacket - pack_with_header_len + 1;
+	/*
+	 * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
+	 * but we need to know ourself, because this would add to the length
+	 * we send down to the device...
+	 */
+	else if (!(pack_with_header_len % dev->maxpacket))
+		need_tail = 1;
+
+	if (!skb_cloned(skb) &&
+			(headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
+		if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
+			skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb,
+				INT51X1_HEADER_SIZE,
+				need_tail,
+				flags);
+		dev_kfree_skb_any(skb);
+		if (!skb2)
+			return NULL;
+		skb = skb2;
+	}
+
+	pack_len += need_tail;
+	pack_len &= 0x07ff;
+
+	len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE);
+	*len = cpu_to_le16(pack_len);
+
+	if(need_tail)
+		memset(__skb_put(skb, need_tail), 0, need_tail);
+
+	return skb;
+}
+
+static void int51x1_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* do not expect to see traffic of other PLCs */
+		filter |= PACKET_TYPE_PROMISCUOUS;
+		netdev_info(dev->net, "promiscuous mode enabled\n");
+	} else if (!netdev_mc_empty(netdev) ||
+		  (netdev->flags & IFF_ALLMULTI)) {
+		filter |= PACKET_TYPE_ALL_MULTICAST;
+		netdev_dbg(dev->net, "receive all multicast enabled\n");
+	} else {
+		/* ~PROMISCUOUS, ~MULTICAST */
+		netdev_dbg(dev->net, "receive own packets only\n");
+	}
+
+	usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER,
+			       USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			       filter, 0, NULL, 0);
+}
+
+static const struct net_device_ops int51x1_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_rx_mode	= int51x1_set_multicast,
+};
+
+static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = usbnet_get_ethernet_addr(dev, 3);
+
+	if (status)
+		return status;
+
+	dev->net->hard_header_len += INT51X1_HEADER_SIZE;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->netdev_ops = &int51x1_netdev_ops;
+
+	return usbnet_get_endpoints(dev, intf);
+}
+
+static const struct driver_info int51x1_info = {
+	.description = "Intellon usb powerline adapter",
+	.bind        = int51x1_bind,
+	.rx_fixup    = int51x1_rx_fixup,
+	.tx_fixup    = int51x1_tx_fixup,
+	.in          = 1,
+	.out         = 2,
+	.flags       = FLAG_ETHER,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
+		.driver_info = (unsigned long) &int51x1_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver int51x1_driver = {
+	.name       = "int51x1",
+	.id_table   = products,
+	.probe      = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend    = usbnet_suspend,
+	.resume     = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(int51x1_driver);
+
+MODULE_AUTHOR("Peter Holik");
+MODULE_DESCRIPTION("Intellon usb powerline adapter");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/ipheth.c backports-4.2.6-1/drivers/net/usb/ipheth.c
--- backports-4.2.6-1.org/drivers/net/usb/ipheth.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/ipheth.c	2016-06-28 14:35:17.985307220 +0200
@@ -0,0 +1,588 @@
+/*
+ * ipheth.c - Apple iPhone USB Ethernet driver
+ *
+ * Copyright (c) 2009 Diego Giagio <diego@giagio.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of GIAGIO.COM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ *
+ * Attention: iPhone device must be paired, otherwise it won't respond to our
+ * driver. For more info: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#define USB_VENDOR_APPLE        0x05ac
+#define USB_PRODUCT_IPHONE      0x1290
+#define USB_PRODUCT_IPHONE_3G   0x1292
+#define USB_PRODUCT_IPHONE_3GS  0x1294
+#define USB_PRODUCT_IPHONE_4	0x1297
+#define USB_PRODUCT_IPAD 0x129a
+#define USB_PRODUCT_IPAD_2	0x12a2
+#define USB_PRODUCT_IPAD_3	0x12a6
+#define USB_PRODUCT_IPAD_MINI    0x12ab
+#define USB_PRODUCT_IPHONE_4_VZW 0x129c
+#define USB_PRODUCT_IPHONE_4S	0x12a0
+#define USB_PRODUCT_IPHONE_5	0x12a8
+
+#define IPHETH_USBINTF_CLASS    255
+#define IPHETH_USBINTF_SUBCLASS 253
+#define IPHETH_USBINTF_PROTO    1
+
+#define IPHETH_BUF_SIZE         1516
+#define IPHETH_IP_ALIGN		2	/* padding at front of URB */
+#define IPHETH_TX_TIMEOUT       (5 * HZ)
+
+#define IPHETH_INTFNUM          2
+#define IPHETH_ALT_INTFNUM      1
+
+#define IPHETH_CTRL_ENDP        0x00
+#define IPHETH_CTRL_BUF_SIZE    0x40
+#define IPHETH_CTRL_TIMEOUT     (5 * HZ)
+
+#define IPHETH_CMD_GET_MACADDR   0x00
+#define IPHETH_CMD_CARRIER_CHECK 0x45
+
+#define IPHETH_CARRIER_CHECK_TIMEOUT round_jiffies_relative(1 * HZ)
+#define IPHETH_CARRIER_ON       0x04
+
+static struct usb_device_id ipheth_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3G,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3GS,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPAD_2,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPAD_3,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPAD_MINI,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, ipheth_table);
+
+struct ipheth_device {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct net_device *net;
+	struct sk_buff *tx_skb;
+	struct urb *tx_urb;
+	struct urb *rx_urb;
+	unsigned char *tx_buf;
+	unsigned char *rx_buf;
+	unsigned char *ctrl_buf;
+	u8 bulk_in;
+	u8 bulk_out;
+	struct delayed_work carrier_work;
+};
+
+static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags);
+
+static int ipheth_alloc_urbs(struct ipheth_device *iphone)
+{
+	struct urb *tx_urb = NULL;
+	struct urb *rx_urb = NULL;
+	u8 *tx_buf = NULL;
+	u8 *rx_buf = NULL;
+
+	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (tx_urb == NULL)
+		goto error_nomem;
+
+	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (rx_urb == NULL)
+		goto free_tx_urb;
+
+	tx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+				    GFP_KERNEL, &tx_urb->transfer_dma);
+	if (tx_buf == NULL)
+		goto free_rx_urb;
+
+	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+				    GFP_KERNEL, &rx_urb->transfer_dma);
+	if (rx_buf == NULL)
+		goto free_tx_buf;
+
+
+	iphone->tx_urb = tx_urb;
+	iphone->rx_urb = rx_urb;
+	iphone->tx_buf = tx_buf;
+	iphone->rx_buf = rx_buf;
+	return 0;
+
+free_tx_buf:
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
+			  tx_urb->transfer_dma);
+free_rx_urb:
+	usb_free_urb(rx_urb);
+free_tx_urb:
+	usb_free_urb(tx_urb);
+error_nomem:
+	return -ENOMEM;
+}
+
+static void ipheth_free_urbs(struct ipheth_device *iphone)
+{
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
+			  iphone->rx_urb->transfer_dma);
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
+			  iphone->tx_urb->transfer_dma);
+	usb_free_urb(iphone->rx_urb);
+	usb_free_urb(iphone->tx_urb);
+}
+
+static void ipheth_kill_urbs(struct ipheth_device *dev)
+{
+	usb_kill_urb(dev->tx_urb);
+	usb_kill_urb(dev->rx_urb);
+}
+
+static void ipheth_rcvbulk_callback(struct urb *urb)
+{
+	struct ipheth_device *dev;
+	struct sk_buff *skb;
+	int status;
+	char *buf;
+	int len;
+
+	dev = urb->context;
+	if (dev == NULL)
+		return;
+
+	status = urb->status;
+	switch (status) {
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		return;
+	case 0:
+		break;
+	default:
+		dev_err(&dev->intf->dev, "%s: urb status: %d\n",
+			__func__, status);
+		return;
+	}
+
+	if (urb->actual_length <= IPHETH_IP_ALIGN) {
+		dev->net->stats.rx_length_errors++;
+		return;
+	}
+	len = urb->actual_length - IPHETH_IP_ALIGN;
+	buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
+
+	skb = dev_alloc_skb(len);
+	if (!skb) {
+		dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n",
+			__func__);
+		dev->net->stats.rx_dropped++;
+		return;
+	}
+
+	memcpy(skb_put(skb, len), buf, len);
+	skb->dev = dev->net;
+	skb->protocol = eth_type_trans(skb, dev->net);
+
+	dev->net->stats.rx_packets++;
+	dev->net->stats.rx_bytes += len;
+
+	netif_rx(skb);
+	ipheth_rx_submit(dev, GFP_ATOMIC);
+}
+
+static void ipheth_sndbulk_callback(struct urb *urb)
+{
+	struct ipheth_device *dev;
+	int status = urb->status;
+
+	dev = urb->context;
+	if (dev == NULL)
+		return;
+
+	if (status != 0 &&
+	    status != -ENOENT &&
+	    status != -ECONNRESET &&
+	    status != -ESHUTDOWN)
+		dev_err(&dev->intf->dev, "%s: urb status: %d\n",
+		__func__, status);
+
+	dev_kfree_skb_irq(dev->tx_skb);
+	netif_wake_queue(dev->net);
+}
+
+static int ipheth_carrier_set(struct ipheth_device *dev)
+{
+	struct usb_device *udev = dev->udev;
+	int retval;
+
+	retval = usb_control_msg(udev,
+			usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
+			IPHETH_CMD_CARRIER_CHECK, /* request */
+			0xc0, /* request type */
+			0x00, /* value */
+			0x02, /* index */
+			dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
+			IPHETH_CTRL_TIMEOUT);
+	if (retval < 0) {
+		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
+			__func__, retval);
+		return retval;
+	}
+
+	if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON)
+		netif_carrier_on(dev->net);
+	else
+		netif_carrier_off(dev->net);
+
+	return 0;
+}
+
+static void ipheth_carrier_check_work(struct work_struct *work)
+{
+	struct ipheth_device *dev = container_of(work, struct ipheth_device,
+						 carrier_work.work);
+
+	ipheth_carrier_set(dev);
+	schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
+}
+
+static int ipheth_get_macaddr(struct ipheth_device *dev)
+{
+	struct usb_device *udev = dev->udev;
+	struct net_device *net = dev->net;
+	int retval;
+
+	retval = usb_control_msg(udev,
+				 usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
+				 IPHETH_CMD_GET_MACADDR, /* request */
+				 0xc0, /* request type */
+				 0x00, /* value */
+				 0x02, /* index */
+				 dev->ctrl_buf,
+				 IPHETH_CTRL_BUF_SIZE,
+				 IPHETH_CTRL_TIMEOUT);
+	if (retval < 0) {
+		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
+			__func__, retval);
+	} else if (retval < ETH_ALEN) {
+		dev_err(&dev->intf->dev,
+			"%s: usb_control_msg: short packet: %d bytes\n",
+			__func__, retval);
+		retval = -EINVAL;
+	} else {
+		memcpy(net->dev_addr, dev->ctrl_buf, ETH_ALEN);
+		retval = 0;
+	}
+
+	return retval;
+}
+
+static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags)
+{
+	struct usb_device *udev = dev->udev;
+	int retval;
+
+	usb_fill_bulk_urb(dev->rx_urb, udev,
+			  usb_rcvbulkpipe(udev, dev->bulk_in),
+			  dev->rx_buf, IPHETH_BUF_SIZE,
+			  ipheth_rcvbulk_callback,
+			  dev);
+	dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	retval = usb_submit_urb(dev->rx_urb, mem_flags);
+	if (retval)
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
+			__func__, retval);
+	return retval;
+}
+
+static int ipheth_open(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+	struct usb_device *udev = dev->udev;
+	int retval = 0;
+
+	usb_set_interface(udev, IPHETH_INTFNUM, IPHETH_ALT_INTFNUM);
+
+	retval = ipheth_carrier_set(dev);
+	if (retval)
+		return retval;
+
+	retval = ipheth_rx_submit(dev, GFP_KERNEL);
+	if (retval)
+		return retval;
+
+	schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
+	netif_start_queue(net);
+	return retval;
+}
+
+static int ipheth_close(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+
+	cancel_delayed_work_sync(&dev->carrier_work);
+	netif_stop_queue(net);
+	return 0;
+}
+
+static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+	struct usb_device *udev = dev->udev;
+	int retval;
+
+	/* Paranoid */
+	if (skb->len > IPHETH_BUF_SIZE) {
+		WARN(1, "%s: skb too large: %d bytes\n", __func__, skb->len);
+		dev->net->stats.tx_dropped++;
+		dev_kfree_skb_irq(skb);
+		return NETDEV_TX_OK;
+	}
+
+	memcpy(dev->tx_buf, skb->data, skb->len);
+	if (skb->len < IPHETH_BUF_SIZE)
+		memset(dev->tx_buf + skb->len, 0, IPHETH_BUF_SIZE - skb->len);
+
+	usb_fill_bulk_urb(dev->tx_urb, udev,
+			  usb_sndbulkpipe(udev, dev->bulk_out),
+			  dev->tx_buf, IPHETH_BUF_SIZE,
+			  ipheth_sndbulk_callback,
+			  dev);
+	dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
+	if (retval) {
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
+			__func__, retval);
+		dev->net->stats.tx_errors++;
+		dev_kfree_skb_irq(skb);
+	} else {
+		dev->tx_skb = skb;
+
+		dev->net->stats.tx_packets++;
+		dev->net->stats.tx_bytes += skb->len;
+		netif_stop_queue(net);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void ipheth_tx_timeout(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+
+	dev_err(&dev->intf->dev, "%s: TX timeout\n", __func__);
+	dev->net->stats.tx_errors++;
+	usb_unlink_urb(dev->tx_urb);
+}
+
+static u32 ipheth_ethtool_op_get_link(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+	return netif_carrier_ok(dev->net);
+}
+
+static const struct ethtool_ops ops = {
+	.get_link = ipheth_ethtool_op_get_link
+};
+
+static const struct net_device_ops ipheth_netdev_ops = {
+	.ndo_open = ipheth_open,
+	.ndo_stop = ipheth_close,
+	.ndo_start_xmit = ipheth_tx,
+	.ndo_tx_timeout = ipheth_tx_timeout,
+};
+
+static int ipheth_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_interface *hintf;
+	struct usb_endpoint_descriptor *endp;
+	struct ipheth_device *dev;
+	struct net_device *netdev;
+	int i;
+	int retval;
+
+	netdev = alloc_etherdev(sizeof(struct ipheth_device));
+	if (!netdev)
+		return -ENOMEM;
+
+	netdev->netdev_ops = &ipheth_netdev_ops;
+	netdev->watchdog_timeo = IPHETH_TX_TIMEOUT;
+	strcpy(netdev->name, "eth%d");
+
+	dev = netdev_priv(netdev);
+	dev->udev = udev;
+	dev->net = netdev;
+	dev->intf = intf;
+
+	/* Set up endpoints */
+	hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM);
+	if (hintf == NULL) {
+		retval = -ENODEV;
+		dev_err(&intf->dev, "Unable to find alternate settings interface\n");
+		goto err_endpoints;
+	}
+
+	for (i = 0; i < hintf->desc.bNumEndpoints; i++) {
+		endp = &hintf->endpoint[i].desc;
+		if (usb_endpoint_is_bulk_in(endp))
+			dev->bulk_in = endp->bEndpointAddress;
+		else if (usb_endpoint_is_bulk_out(endp))
+			dev->bulk_out = endp->bEndpointAddress;
+	}
+	if (!(dev->bulk_in && dev->bulk_out)) {
+		retval = -ENODEV;
+		dev_err(&intf->dev, "Unable to find endpoints\n");
+		goto err_endpoints;
+	}
+
+	dev->ctrl_buf = kmalloc(IPHETH_CTRL_BUF_SIZE, GFP_KERNEL);
+	if (dev->ctrl_buf == NULL) {
+		retval = -ENOMEM;
+		goto err_alloc_ctrl_buf;
+	}
+
+	retval = ipheth_get_macaddr(dev);
+	if (retval)
+		goto err_get_macaddr;
+
+	INIT_DELAYED_WORK(&dev->carrier_work, ipheth_carrier_check_work);
+
+	retval = ipheth_alloc_urbs(dev);
+	if (retval) {
+		dev_err(&intf->dev, "error allocating urbs: %d\n", retval);
+		goto err_alloc_urbs;
+	}
+
+	usb_set_intfdata(intf, dev);
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	netdev->ethtool_ops = &ops;
+
+	retval = register_netdev(netdev);
+	if (retval) {
+		dev_err(&intf->dev, "error registering netdev: %d\n", retval);
+		retval = -EIO;
+		goto err_register_netdev;
+	}
+
+	dev_info(&intf->dev, "Apple iPhone USB Ethernet device attached\n");
+	return 0;
+
+err_register_netdev:
+	ipheth_free_urbs(dev);
+err_alloc_urbs:
+err_get_macaddr:
+err_alloc_ctrl_buf:
+	kfree(dev->ctrl_buf);
+err_endpoints:
+	free_netdev(netdev);
+	return retval;
+}
+
+static void ipheth_disconnect(struct usb_interface *intf)
+{
+	struct ipheth_device *dev;
+
+	dev = usb_get_intfdata(intf);
+	if (dev != NULL) {
+		unregister_netdev(dev->net);
+		ipheth_kill_urbs(dev);
+		ipheth_free_urbs(dev);
+		kfree(dev->ctrl_buf);
+		free_netdev(dev->net);
+	}
+	usb_set_intfdata(intf, NULL);
+	dev_info(&intf->dev, "Apple iPhone USB Ethernet now disconnected\n");
+}
+
+static struct usb_driver ipheth_driver = {
+	.name =		"ipheth",
+	.probe =	ipheth_probe,
+	.disconnect =	ipheth_disconnect,
+	.id_table =	ipheth_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ipheth_driver);
+
+MODULE_AUTHOR("Diego Giagio <diego@giagio.com>");
+MODULE_DESCRIPTION("Apple iPhone USB Ethernet driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/kalmia.c backports-4.2.6-1/drivers/net/usb/kalmia.c
--- backports-4.2.6-1.org/drivers/net/usb/kalmia.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/kalmia.c	2016-06-28 14:35:17.985307220 +0200
@@ -0,0 +1,366 @@
+/*
+ * USB network interface driver for Samsung Kalmia based LTE USB modem like the
+ * Samsung GT-B3730 and GT-B3710.
+ *
+ * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
+ *
+ * Sponsored by Quicklink Video Distribution Services Ltd.
+ *
+ * Based on the cdc_eem module.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+/*
+ * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
+ * handled by the "option" module and an ethernet data port handled by this
+ * module.
+ *
+ * The stick must first be switched into modem mode by usb_modeswitch
+ * or similar tool. Then the modem gets sent two initialization packets by
+ * this module, which gives the MAC address of the device. User space can then
+ * connect the modem using AT commands through the ACM port and then use
+ * DHCP on the network interface exposed by this module. Network packets are
+ * sent to and from the modem in a proprietary format discovered after watching
+ * the behavior of the windows driver for the modem.
+ *
+ * More information about the use of the modem is available in usb_modeswitch
+ * forum and the project page:
+ *
+ * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
+ * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
+ */
+
+/* #define	DEBUG */
+/* #define	VERBOSE */
+
+#define KALMIA_HEADER_LENGTH 6
+#define KALMIA_ALIGN_SIZE 4
+#define KALMIA_USB_TIMEOUT 10000
+
+/*-------------------------------------------------------------------------*/
+
+static int
+kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
+	u8 *buffer, u8 expected_len)
+{
+	int act_len;
+	int status;
+
+	netdev_dbg(dev->net, "Sending init packet");
+
+	status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
+		init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
+	if (status != 0) {
+		netdev_err(dev->net,
+			"Error sending init packet. Status %i, length %i\n",
+			status, act_len);
+		return status;
+	}
+	else if (act_len != init_msg_len) {
+		netdev_err(dev->net,
+			"Did not send all of init packet. Bytes sent: %i",
+			act_len);
+	}
+	else {
+		netdev_dbg(dev->net, "Successfully sent init packet.");
+	}
+
+	status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
+		buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);
+
+	if (status != 0)
+		netdev_err(dev->net,
+			"Error receiving init result. Status %i, length %i\n",
+			status, act_len);
+	else if (act_len != expected_len)
+		netdev_err(dev->net, "Unexpected init result length: %i\n",
+			act_len);
+
+	return status;
+}
+
+static int
+kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
+{
+	static const char init_msg_1[] =
+		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
+		0x00, 0x00 };
+	static const char init_msg_2[] =
+		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
+		0x00, 0x00 };
+	static const int buflen = 28;
+	char *usb_buf;
+	int status;
+
+	usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
+	if (!usb_buf)
+		return -ENOMEM;
+
+	memcpy(usb_buf, init_msg_1, 12);
+	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
+		/ sizeof(init_msg_1[0]), usb_buf, 24);
+	if (status != 0)
+		return status;
+
+	memcpy(usb_buf, init_msg_2, 12);
+	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
+		/ sizeof(init_msg_2[0]), usb_buf, 28);
+	if (status != 0)
+		return status;
+
+	memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
+
+	kfree(usb_buf);
+	return status;
+}
+
+static int
+kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status;
+	u8 ethernet_addr[ETH_ALEN];
+
+	/* Don't bind to AT command interface */
+	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+		return -EINVAL;
+
+	dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
+	dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
+	dev->status = NULL;
+
+	dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
+	dev->hard_mtu = 1400;
+	dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing
+
+	status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
+
+	if (status < 0) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(driver_of(intf), intf);
+		return status;
+	}
+
+	memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);
+
+	return status;
+}
+
+static struct sk_buff *
+kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb2 = NULL;
+	u16 content_len;
+	unsigned char *header_start;
+	unsigned char ether_type_1, ether_type_2;
+	u8 remainder, padlen = 0;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
+			>= KALMIA_HEADER_LENGTH))
+			goto done;
+
+		if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
+			+ KALMIA_ALIGN_SIZE)) {
+			skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
+				skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
+		KALMIA_ALIGN_SIZE, flags);
+	if (!skb2)
+		return NULL;
+
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+
+done:
+	header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+	ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
+	ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
+
+	netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
+		ether_type_2);
+
+	/* According to empiric data for data packages */
+	header_start[0] = 0x57;
+	header_start[1] = 0x44;
+	content_len = skb->len - KALMIA_HEADER_LENGTH;
+
+	put_unaligned_le16(content_len, &header_start[2]);
+	header_start[4] = ether_type_1;
+	header_start[5] = ether_type_2;
+
+	/* Align to 4 bytes by padding with zeros */
+	remainder = skb->len % KALMIA_ALIGN_SIZE;
+	if (remainder > 0) {
+		padlen = KALMIA_ALIGN_SIZE - remainder;
+		memset(skb_put(skb, padlen), 0, padlen);
+	}
+
+	netdev_dbg(dev->net,
+		"Sending package with length %i and padding %i. Header: %6phC.",
+		content_len, padlen, header_start);
+
+	return skb;
+}
+
+static int
+kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.
+	 */
+	static const u8 HEADER_END_OF_USB_PACKET[] =
+		{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
+	static const u8 EXPECTED_UNKNOWN_HEADER_1[] =
+		{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
+	static const u8 EXPECTED_UNKNOWN_HEADER_2[] =
+		{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
+	int i = 0;
+
+	/* incomplete header? */
+	if (skb->len < KALMIA_HEADER_LENGTH)
+		return 0;
+
+	do {
+		struct sk_buff *skb2 = NULL;
+		u8 *header_start;
+		u16 usb_packet_length, ether_packet_length;
+		int is_last;
+
+		header_start = skb->data;
+
+		if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
+			if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
+				sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
+				header_start, EXPECTED_UNKNOWN_HEADER_2,
+				sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
+				netdev_dbg(dev->net,
+					"Received expected unknown frame header: %6phC. Package length: %i\n",
+					header_start,
+					skb->len - KALMIA_HEADER_LENGTH);
+			}
+			else {
+				netdev_err(dev->net,
+					"Received unknown frame header: %6phC. Package length: %i\n",
+					header_start,
+					skb->len - KALMIA_HEADER_LENGTH);
+				return 0;
+			}
+		}
+		else
+			netdev_dbg(dev->net,
+				"Received header: %6phC. Package length: %i\n",
+				header_start, skb->len - KALMIA_HEADER_LENGTH);
+
+		/* subtract start header and end header */
+		usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
+		ether_packet_length = get_unaligned_le16(&header_start[2]);
+		skb_pull(skb, KALMIA_HEADER_LENGTH);
+
+		/* Some small packets misses end marker */
+		if (usb_packet_length < ether_packet_length) {
+			ether_packet_length = usb_packet_length
+				+ KALMIA_HEADER_LENGTH;
+			is_last = true;
+		}
+		else {
+			netdev_dbg(dev->net, "Correct package length #%i", i
+				+ 1);
+
+			is_last = (memcmp(skb->data + ether_packet_length,
+				HEADER_END_OF_USB_PACKET,
+				sizeof(HEADER_END_OF_USB_PACKET)) == 0);
+			if (!is_last) {
+				header_start = skb->data + ether_packet_length;
+				netdev_dbg(dev->net,
+					"End header: %6phC. Package length: %i\n",
+					header_start,
+					skb->len - KALMIA_HEADER_LENGTH);
+			}
+		}
+
+		if (is_last) {
+			skb2 = skb;
+		}
+		else {
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!skb2))
+				return 0;
+		}
+
+		skb_trim(skb2, ether_packet_length);
+
+		if (is_last) {
+			return 1;
+		}
+		else {
+			usbnet_skb_return(dev, skb2);
+			skb_pull(skb, ether_packet_length);
+		}
+
+		i++;
+	}
+	while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info kalmia_info = {
+	.description = "Samsung Kalmia LTE USB dongle",
+	.flags = FLAG_WWAN,
+	.bind = kalmia_bind,
+	.rx_fixup = kalmia_rx_fixup,
+	.tx_fixup = kalmia_tx_fixup
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+	/* The unswitched USB ID, to get the module auto loaded: */
+	{ USB_DEVICE(0x04e8, 0x689a) },
+	/* The stick swithed into modem (by e.g. usb_modeswitch): */
+	{ USB_DEVICE(0x04e8, 0x6889),
+		.driver_info = (unsigned long) &kalmia_info, },
+	{ /* EMPTY == end of list */} };
+MODULE_DEVICE_TABLE( usb, products);
+
+static struct usb_driver kalmia_driver = {
+	.name = "kalmia",
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(kalmia_driver);
+
+MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
+MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/kaweth.c backports-4.2.6-1/drivers/net/usb/kaweth.c
--- backports-4.2.6-1.org/drivers/net/usb/kaweth.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/kaweth.c	2016-06-28 14:35:17.988640553 +0200
@@ -0,0 +1,1331 @@
+/****************************************************************
+ *
+ *     kaweth.c - driver for KL5KUSB101 based USB->Ethernet
+ *
+ *     (c) 2000 Interlan Communications
+ *     (c) 2000 Stephane Alnet
+ *     (C) 2001 Brad Hards
+ *     (C) 2002 Oliver Neukum
+ *
+ *     Original author: The Zapman <zapman@interlan.net>
+ *     Inspired by, and much credit goes to Michael Rothwell
+ *     <rothwell@interlan.net> for the test equipment, help, and patience
+ *     Based off of (and with thanks to) Petko Manolov's pegaus.c driver.
+ *     Also many thanks to Joel Silverman and Ed Surprenant at Kawasaki
+ *     for providing the firmware and driver resources.
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2, or
+ *     (at your option) any later version.
+ *
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ****************************************************************/
+
+/* TODO:
+ * Develop test procedures for USB net interfaces
+ * Run test procedures
+ * Fix bugs from previous two steps
+ * Snoop other OSs for any tricks we're not doing
+ * Reduce arbitrary timeouts
+ * Smart multicast support
+ * Temporary MAC change support
+ * Tunable SOFs parameter - ioctl()?
+ * Ethernet stats collection
+ * Code formatting improvements
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/usb.h>
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/dma-mapping.h>
+#include <linux/wait.h>
+#include <linux/firmware.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+#undef DEBUG
+
+#define KAWETH_MTU			1514
+#define KAWETH_BUF_SIZE			1664
+#define KAWETH_TX_TIMEOUT		(5 * HZ)
+#define KAWETH_SCRATCH_SIZE		32
+#define KAWETH_FIRMWARE_BUF_SIZE	4096
+#define KAWETH_CONTROL_TIMEOUT		(30000)
+
+#define KAWETH_STATUS_BROKEN		0x0000001
+#define KAWETH_STATUS_CLOSING		0x0000002
+#define KAWETH_STATUS_SUSPENDING	0x0000004
+
+#define KAWETH_STATUS_BLOCKED (KAWETH_STATUS_CLOSING | KAWETH_STATUS_SUSPENDING)
+
+#define KAWETH_PACKET_FILTER_PROMISCUOUS	0x01
+#define KAWETH_PACKET_FILTER_ALL_MULTICAST	0x02
+#define KAWETH_PACKET_FILTER_DIRECTED		0x04
+#define KAWETH_PACKET_FILTER_BROADCAST		0x08
+#define KAWETH_PACKET_FILTER_MULTICAST		0x10
+
+/* Table 7 */
+#define KAWETH_COMMAND_GET_ETHERNET_DESC	0x00
+#define KAWETH_COMMAND_MULTICAST_FILTERS        0x01
+#define KAWETH_COMMAND_SET_PACKET_FILTER	0x02
+#define KAWETH_COMMAND_STATISTICS               0x03
+#define KAWETH_COMMAND_SET_TEMP_MAC     	0x06
+#define KAWETH_COMMAND_GET_TEMP_MAC             0x07
+#define KAWETH_COMMAND_SET_URB_SIZE		0x08
+#define KAWETH_COMMAND_SET_SOFS_WAIT		0x09
+#define KAWETH_COMMAND_SCAN			0xFF
+
+#define KAWETH_SOFS_TO_WAIT			0x05
+
+#define INTBUFFERSIZE				4
+
+#define STATE_OFFSET				0
+#define STATE_MASK				0x40
+#define	STATE_SHIFT				5
+
+#define IS_BLOCKED(s) (s & KAWETH_STATUS_BLOCKED)
+
+
+MODULE_AUTHOR("Michael Zappe <zapman@interlan.net>, Stephane Alnet <stephane@u-picardie.fr>, Brad Hards <bhards@bigpond.net.au> and Oliver Neukum <oliver@neukum.org>");
+MODULE_DESCRIPTION("KL5USB101 USB Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("kaweth/new_code.bin");
+MODULE_FIRMWARE("kaweth/new_code_fix.bin");
+MODULE_FIRMWARE("kaweth/trigger_code.bin");
+MODULE_FIRMWARE("kaweth/trigger_code_fix.bin");
+
+static const char driver_name[] = "kaweth";
+
+static int kaweth_probe(
+		struct usb_interface *intf,
+		const struct usb_device_id *id	/* from id_table */
+	);
+static void kaweth_disconnect(struct usb_interface *intf);
+static int kaweth_internal_control_msg(struct usb_device *usb_dev,
+				       unsigned int pipe,
+				       struct usb_ctrlrequest *cmd, void *data,
+				       int len, int timeout);
+static int kaweth_suspend(struct usb_interface *intf, pm_message_t message);
+static int kaweth_resume(struct usb_interface *intf);
+
+/****************************************************************
+ *     usb_device_id
+ ****************************************************************/
+static struct usb_device_id usb_klsi_table[] = {
+	{ USB_DEVICE(0x03e8, 0x0008) }, /* AOX Endpoints USB Ethernet */
+	{ USB_DEVICE(0x04bb, 0x0901) }, /* I-O DATA USB-ET/T */
+	{ USB_DEVICE(0x0506, 0x03e8) }, /* 3Com 3C19250 */
+	{ USB_DEVICE(0x0506, 0x11f8) }, /* 3Com 3C460 */
+	{ USB_DEVICE(0x0557, 0x2002) }, /* ATEN USB Ethernet */
+	{ USB_DEVICE(0x0557, 0x4000) }, /* D-Link DSB-650C */
+	{ USB_DEVICE(0x0565, 0x0002) }, /* Peracom Enet */
+	{ USB_DEVICE(0x0565, 0x0003) }, /* Optus@Home UEP1045A */
+	{ USB_DEVICE(0x0565, 0x0005) }, /* Peracom Enet2 */
+	{ USB_DEVICE(0x05e9, 0x0008) }, /* KLSI KL5KUSB101B */
+	{ USB_DEVICE(0x05e9, 0x0009) }, /* KLSI KL5KUSB101B (Board change) */
+	{ USB_DEVICE(0x066b, 0x2202) }, /* Linksys USB10T */
+	{ USB_DEVICE(0x06e1, 0x0008) }, /* ADS USB-10BT */
+	{ USB_DEVICE(0x06e1, 0x0009) }, /* ADS USB-10BT */
+	{ USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */
+	{ USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */
+	{ USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */
+	{ USB_DEVICE(0x07c9, 0xb010) }, /* Allied Telesyn AT-USB10 USB Ethernet Adapter */
+	{ USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */
+	{ USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */
+	{ USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */
+	{ USB_DEVICE(0x085a, 0x0009) }, /* PortGear Ethernet Adapter */
+	{ USB_DEVICE(0x087d, 0x5704) }, /* Jaton USB Ethernet Device Adapter */
+	{ USB_DEVICE(0x0951, 0x0008) }, /* Kingston Technology USB Ethernet Adapter */
+	{ USB_DEVICE(0x095a, 0x3003) }, /* Portsmith Express Ethernet Adapter */
+	{ USB_DEVICE(0x10bd, 0x1427) }, /* ASANTE USB To Ethernet Adapter */
+	{ USB_DEVICE(0x1342, 0x0204) }, /* Mobility USB-Ethernet Adapter */
+	{ USB_DEVICE(0x13d2, 0x0400) }, /* Shark Pocket Adapter */
+	{ USB_DEVICE(0x1485, 0x0001) },	/* Silicom U2E */
+	{ USB_DEVICE(0x1485, 0x0002) }, /* Psion Dacom Gold Port Ethernet */
+	{ USB_DEVICE(0x1645, 0x0005) }, /* Entrega E45 */
+	{ USB_DEVICE(0x1645, 0x0008) }, /* Entrega USB Ethernet Adapter */
+	{ USB_DEVICE(0x1645, 0x8005) }, /* PortGear Ethernet Adapter */
+	{ USB_DEVICE(0x1668, 0x0323) }, /* Actiontec USB Ethernet */
+	{ USB_DEVICE(0x2001, 0x4000) }, /* D-link DSB-650C */
+	{} /* Null terminator */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_klsi_table);
+
+/****************************************************************
+ *     kaweth_driver
+ ****************************************************************/
+static struct usb_driver kaweth_driver = {
+	.name =		driver_name,
+	.probe =	kaweth_probe,
+	.disconnect =	kaweth_disconnect,
+	.suspend =	kaweth_suspend,
+	.resume =	kaweth_resume,
+	.id_table =     usb_klsi_table,
+	.supports_autosuspend =	1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+typedef __u8 eth_addr_t[6];
+
+/****************************************************************
+ *     usb_eth_dev
+ ****************************************************************/
+struct usb_eth_dev {
+	char *name;
+	__u16 vendor;
+	__u16 device;
+	void *pdata;
+};
+
+/****************************************************************
+ *     kaweth_ethernet_configuration
+ *     Refer Table 8
+ ****************************************************************/
+struct kaweth_ethernet_configuration
+{
+	__u8 size;
+	__u8 reserved1;
+	__u8 reserved2;
+	eth_addr_t hw_addr;
+	__u32 statistics_mask;
+	__le16 segment_size;
+	__u16 max_multicast_filters;
+	__u8 reserved3;
+} __packed;
+
+/****************************************************************
+ *     kaweth_device
+ ****************************************************************/
+struct kaweth_device
+{
+	spinlock_t device_lock;
+
+	__u32 status;
+	int end;
+	int suspend_lowmem_rx;
+	int suspend_lowmem_ctrl;
+	int linkstate;
+	int opened;
+	struct delayed_work lowmem_work;
+
+	struct usb_device *dev;
+	struct usb_interface *intf;
+	struct net_device *net;
+	wait_queue_head_t term_wait;
+
+	struct urb *rx_urb;
+	struct urb *tx_urb;
+	struct urb *irq_urb;
+
+	dma_addr_t intbufferhandle;
+	__u8 *intbuffer;
+	dma_addr_t rxbufferhandle;
+	__u8 *rx_buf;
+
+	
+	struct sk_buff *tx_skb;
+
+	__u8 *firmware_buf;
+	__u8 scratch[KAWETH_SCRATCH_SIZE];
+	__u16 packet_filter_bitmap;
+
+	struct kaweth_ethernet_configuration configuration;
+
+	struct net_device_stats stats;
+};
+
+/****************************************************************
+ *     kaweth_control
+ ****************************************************************/
+static int kaweth_control(struct kaweth_device *kaweth,
+			  unsigned int pipe,
+			  __u8 request,
+			  __u8 requesttype,
+			  __u16 value,
+			  __u16 index,
+			  void *data,
+			  __u16 size,
+			  int timeout)
+{
+	struct usb_ctrlrequest *dr;
+	int retval;
+
+	netdev_dbg(kaweth->net, "kaweth_control()\n");
+
+	if(in_interrupt()) {
+		netdev_dbg(kaweth->net, "in_interrupt()\n");
+		return -EBUSY;
+	}
+
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (!dr)
+		return -ENOMEM;
+
+	dr->bRequestType = requesttype;
+	dr->bRequest = request;
+	dr->wValue = cpu_to_le16(value);
+	dr->wIndex = cpu_to_le16(index);
+	dr->wLength = cpu_to_le16(size);
+
+	retval = kaweth_internal_control_msg(kaweth->dev,
+					     pipe,
+					     dr,
+					     data,
+					     size,
+					     timeout);
+
+	kfree(dr);
+	return retval;
+}
+
+/****************************************************************
+ *     kaweth_read_configuration
+ ****************************************************************/
+static int kaweth_read_configuration(struct kaweth_device *kaweth)
+{
+	int retval;
+
+	netdev_dbg(kaweth->net, "Reading kaweth configuration\n");
+
+	retval = kaweth_control(kaweth,
+				usb_rcvctrlpipe(kaweth->dev, 0),
+				KAWETH_COMMAND_GET_ETHERNET_DESC,
+				USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+				0,
+				0,
+				(void *)&kaweth->configuration,
+				sizeof(kaweth->configuration),
+				KAWETH_CONTROL_TIMEOUT);
+
+	return retval;
+}
+
+/****************************************************************
+ *     kaweth_set_urb_size
+ ****************************************************************/
+static int kaweth_set_urb_size(struct kaweth_device *kaweth, __u16 urb_size)
+{
+	int retval;
+
+	netdev_dbg(kaweth->net, "Setting URB size to %d\n", (unsigned)urb_size);
+
+	retval = kaweth_control(kaweth,
+				usb_sndctrlpipe(kaweth->dev, 0),
+				KAWETH_COMMAND_SET_URB_SIZE,
+				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+				urb_size,
+				0,
+				(void *)&kaweth->scratch,
+				0,
+				KAWETH_CONTROL_TIMEOUT);
+
+	return retval;
+}
+
+/****************************************************************
+ *     kaweth_set_sofs_wait
+ ****************************************************************/
+static int kaweth_set_sofs_wait(struct kaweth_device *kaweth, __u16 sofs_wait)
+{
+	int retval;
+
+	netdev_dbg(kaweth->net, "Set SOFS wait to %d\n", (unsigned)sofs_wait);
+
+	retval = kaweth_control(kaweth,
+				usb_sndctrlpipe(kaweth->dev, 0),
+				KAWETH_COMMAND_SET_SOFS_WAIT,
+				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+				sofs_wait,
+				0,
+				(void *)&kaweth->scratch,
+				0,
+				KAWETH_CONTROL_TIMEOUT);
+
+	return retval;
+}
+
+/****************************************************************
+ *     kaweth_set_receive_filter
+ ****************************************************************/
+static int kaweth_set_receive_filter(struct kaweth_device *kaweth,
+				     __u16 receive_filter)
+{
+	int retval;
+
+	netdev_dbg(kaweth->net, "Set receive filter to %d\n",
+		   (unsigned)receive_filter);
+
+	retval = kaweth_control(kaweth,
+				usb_sndctrlpipe(kaweth->dev, 0),
+				KAWETH_COMMAND_SET_PACKET_FILTER,
+				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+				receive_filter,
+				0,
+				(void *)&kaweth->scratch,
+				0,
+				KAWETH_CONTROL_TIMEOUT);
+
+	return retval;
+}
+
+/****************************************************************
+ *     kaweth_download_firmware
+ ****************************************************************/
+static int kaweth_download_firmware(struct kaweth_device *kaweth,
+				    const char *fwname,
+				    __u8 interrupt,
+				    __u8 type)
+{
+	const struct firmware *fw;
+	int data_len;
+	int ret;
+
+	ret = request_firmware(&fw, fwname, &kaweth->dev->dev);
+	if (ret) {
+		dev_err(&kaweth->intf->dev, "Firmware request failed\n");
+		return ret;
+	}
+
+	if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) {
+		dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n",
+			fw->size);
+		release_firmware(fw);
+		return -ENOSPC;
+	}
+	data_len = fw->size;
+	memcpy(kaweth->firmware_buf, fw->data, fw->size);
+
+	release_firmware(fw);
+
+	kaweth->firmware_buf[2] = (data_len & 0xFF) - 7;
+	kaweth->firmware_buf[3] = data_len >> 8;
+	kaweth->firmware_buf[4] = type;
+	kaweth->firmware_buf[5] = interrupt;
+
+	netdev_dbg(kaweth->net, "High: %i, Low:%i\n", kaweth->firmware_buf[3],
+		   kaweth->firmware_buf[2]);
+
+	netdev_dbg(kaweth->net,
+		   "Downloading firmware at %p to kaweth device at %p\n",
+		   kaweth->firmware_buf, kaweth);
+	netdev_dbg(kaweth->net, "Firmware length: %d\n", data_len);
+
+	return kaweth_control(kaweth,
+		              usb_sndctrlpipe(kaweth->dev, 0),
+			      KAWETH_COMMAND_SCAN,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      0,
+			      0,
+			      (void *)kaweth->firmware_buf,
+			      data_len,
+			      KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_trigger_firmware
+ ****************************************************************/
+static int kaweth_trigger_firmware(struct kaweth_device *kaweth,
+				   __u8 interrupt)
+{
+	kaweth->firmware_buf[0] = 0xB6;
+	kaweth->firmware_buf[1] = 0xC3;
+	kaweth->firmware_buf[2] = 0x01;
+	kaweth->firmware_buf[3] = 0x00;
+	kaweth->firmware_buf[4] = 0x06;
+	kaweth->firmware_buf[5] = interrupt;
+	kaweth->firmware_buf[6] = 0x00;
+	kaweth->firmware_buf[7] = 0x00;
+
+	netdev_dbg(kaweth->net, "Triggering firmware\n");
+
+	return kaweth_control(kaweth,
+			      usb_sndctrlpipe(kaweth->dev, 0),
+			      KAWETH_COMMAND_SCAN,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      0,
+			      0,
+			      (void *)kaweth->firmware_buf,
+			      8,
+			      KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_reset
+ ****************************************************************/
+static int kaweth_reset(struct kaweth_device *kaweth)
+{
+	int result;
+
+	netdev_dbg(kaweth->net, "kaweth_reset(%p)\n", kaweth);
+	result = usb_reset_configuration(kaweth->dev);
+	mdelay(10);
+
+	netdev_dbg(kaweth->net, "kaweth_reset() returns %d.\n", result);
+
+	return result;
+}
+
+static void kaweth_usb_receive(struct urb *);
+static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t);
+
+/****************************************************************
+	int_callback
+*****************************************************************/
+
+static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
+{
+	int status;
+
+	status = usb_submit_urb (kaweth->irq_urb, mf);
+	if (unlikely(status == -ENOMEM)) {
+		kaweth->suspend_lowmem_ctrl = 1;
+		schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+	} else {
+		kaweth->suspend_lowmem_ctrl = 0;
+	}
+
+	if (status)
+		dev_err(&kaweth->intf->dev,
+			"can't resubmit intr, %s-%s, status %d\n",
+			kaweth->dev->bus->bus_name,
+			kaweth->dev->devpath, status);
+}
+
+static void int_callback(struct urb *u)
+{
+	struct kaweth_device *kaweth = u->context;
+	int act_state;
+	int status = u->status;
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:		/* error */
+		goto resubmit;
+	}
+
+	/* we check the link state to report changes */
+	if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) {
+		if (act_state)
+			netif_carrier_on(kaweth->net);
+		else
+			netif_carrier_off(kaweth->net);
+
+		kaweth->linkstate = act_state;
+	}
+resubmit:
+	kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
+}
+
+static void kaweth_resubmit_tl(struct work_struct *work)
+{
+	struct kaweth_device *kaweth =
+		container_of(work, struct kaweth_device, lowmem_work.work);
+
+	if (IS_BLOCKED(kaweth->status))
+		return;
+
+	if (kaweth->suspend_lowmem_rx)
+		kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+
+	if (kaweth->suspend_lowmem_ctrl)
+		kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
+}
+
+
+/****************************************************************
+ *     kaweth_resubmit_rx_urb
+ ****************************************************************/
+static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
+						gfp_t mem_flags)
+{
+	int result;
+
+	usb_fill_bulk_urb(kaweth->rx_urb,
+		      kaweth->dev,
+		      usb_rcvbulkpipe(kaweth->dev, 1),
+		      kaweth->rx_buf,
+		      KAWETH_BUF_SIZE,
+		      kaweth_usb_receive,
+		      kaweth);
+	kaweth->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
+
+	if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
+		if (result == -ENOMEM) {
+			kaweth->suspend_lowmem_rx = 1;
+			schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+		}
+		dev_err(&kaweth->intf->dev, "resubmitting rx_urb %d failed\n",
+			result);
+	} else {
+		kaweth->suspend_lowmem_rx = 0;
+	}
+
+	return result;
+}
+
+static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth);
+
+/****************************************************************
+ *     kaweth_usb_receive
+ ****************************************************************/
+static void kaweth_usb_receive(struct urb *urb)
+{
+	struct device *dev = &urb->dev->dev;
+	struct kaweth_device *kaweth = urb->context;
+	struct net_device *net = kaweth->net;
+	int status = urb->status;
+
+	int count = urb->actual_length;
+	int count2 = urb->transfer_buffer_length;
+
+	__u16 pkt_len = le16_to_cpup((__le16 *)kaweth->rx_buf);
+
+	struct sk_buff *skb;
+
+	if (unlikely(status == -EPIPE)) {
+		kaweth->stats.rx_errors++;
+		kaweth->end = 1;
+		wake_up(&kaweth->term_wait);
+		dev_dbg(dev, "Status was -EPIPE.\n");
+		return;
+	}
+	if (unlikely(status == -ECONNRESET || status == -ESHUTDOWN)) {
+		/* we are killed - set a flag and wake the disconnect handler */
+		kaweth->end = 1;
+		wake_up(&kaweth->term_wait);
+		dev_dbg(dev, "Status was -ECONNRESET or -ESHUTDOWN.\n");
+		return;
+	}
+	if (unlikely(status == -EPROTO || status == -ETIME ||
+		     status == -EILSEQ)) {
+		kaweth->stats.rx_errors++;
+		dev_dbg(dev, "Status was -EPROTO, -ETIME, or -EILSEQ.\n");
+		return;
+	}
+	if (unlikely(status == -EOVERFLOW)) {
+		kaweth->stats.rx_errors++;
+		dev_dbg(dev, "Status was -EOVERFLOW.\n");
+	}
+	spin_lock(&kaweth->device_lock);
+	if (IS_BLOCKED(kaweth->status)) {
+		spin_unlock(&kaweth->device_lock);
+		return;
+	}
+	spin_unlock(&kaweth->device_lock);
+
+	if(status && status != -EREMOTEIO && count != 1) {
+		dev_err(&kaweth->intf->dev,
+			"%s RX status: %d count: %d packet_len: %d\n",
+			net->name, status, count, (int)pkt_len);
+		kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+                return;
+	}
+
+	if(kaweth->net && (count > 2)) {
+		if(pkt_len > (count - 2)) {
+			dev_err(&kaweth->intf->dev,
+				"Packet length too long for USB frame (pkt_len: %x, count: %x)\n",
+				pkt_len, count);
+			dev_err(&kaweth->intf->dev, "Packet len & 2047: %x\n",
+				pkt_len & 2047);
+			dev_err(&kaweth->intf->dev, "Count 2: %x\n", count2);
+		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+                        return;
+                }
+
+		if(!(skb = dev_alloc_skb(pkt_len+2))) {
+		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+                        return;
+		}
+
+		skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
+
+		skb_copy_to_linear_data(skb, kaweth->rx_buf + 2, pkt_len);
+
+		skb_put(skb, pkt_len);
+
+		skb->protocol = eth_type_trans(skb, net);
+
+		netif_rx(skb);
+
+		kaweth->stats.rx_packets++;
+		kaweth->stats.rx_bytes += pkt_len;
+	}
+
+	kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+}
+
+/****************************************************************
+ *     kaweth_open
+ ****************************************************************/
+static int kaweth_open(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+	int res;
+
+	netdev_dbg(kaweth->net, "Opening network device.\n");
+
+	res = usb_autopm_get_interface(kaweth->intf);
+	if (res) {
+		dev_err(&kaweth->intf->dev, "Interface cannot be resumed.\n");
+		return -EIO;
+	}
+	res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
+	if (res)
+		goto err_out;
+
+	usb_fill_int_urb(
+		kaweth->irq_urb,
+		kaweth->dev,
+		usb_rcvintpipe(kaweth->dev, 3),
+		kaweth->intbuffer,
+		INTBUFFERSIZE,
+		int_callback,
+		kaweth,
+		250); /* overriding the descriptor */
+	kaweth->irq_urb->transfer_dma = kaweth->intbufferhandle;
+	kaweth->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	res = usb_submit_urb(kaweth->irq_urb, GFP_KERNEL);
+	if (res) {
+		usb_kill_urb(kaweth->rx_urb);
+		goto err_out;
+	}
+	kaweth->opened = 1;
+
+	netif_start_queue(net);
+
+	kaweth_async_set_rx_mode(kaweth);
+	return 0;
+
+err_out:
+	usb_autopm_put_interface(kaweth->intf);
+	return -EIO;
+}
+
+/****************************************************************
+ *     kaweth_kill_urbs
+ ****************************************************************/
+static void kaweth_kill_urbs(struct kaweth_device *kaweth)
+{
+	usb_kill_urb(kaweth->irq_urb);
+	usb_kill_urb(kaweth->rx_urb);
+	usb_kill_urb(kaweth->tx_urb);
+
+	cancel_delayed_work_sync(&kaweth->lowmem_work);
+
+	/* a scheduled work may have resubmitted,
+	   we hit them again */
+	usb_kill_urb(kaweth->irq_urb);
+	usb_kill_urb(kaweth->rx_urb);
+}
+
+/****************************************************************
+ *     kaweth_close
+ ****************************************************************/
+static int kaweth_close(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+
+	netif_stop_queue(net);
+	kaweth->opened = 0;
+
+	kaweth->status |= KAWETH_STATUS_CLOSING;
+
+	kaweth_kill_urbs(kaweth);
+
+	kaweth->status &= ~KAWETH_STATUS_CLOSING;
+
+	usb_autopm_put_interface(kaweth->intf);
+
+	return 0;
+}
+
+static u32 kaweth_get_link(struct net_device *dev)
+{
+	struct kaweth_device *kaweth = netdev_priv(dev);
+
+	return kaweth->linkstate;
+}
+
+static const struct ethtool_ops ops = {
+	.get_link	= kaweth_get_link
+};
+
+/****************************************************************
+ *     kaweth_usb_transmit_complete
+ ****************************************************************/
+static void kaweth_usb_transmit_complete(struct urb *urb)
+{
+	struct kaweth_device *kaweth = urb->context;
+	struct sk_buff *skb = kaweth->tx_skb;
+	int status = urb->status;
+
+	if (unlikely(status != 0))
+		if (status != -ENOENT)
+			dev_dbg(&urb->dev->dev, "%s: TX status %d.\n",
+				kaweth->net->name, status);
+
+	netif_wake_queue(kaweth->net);
+	dev_kfree_skb_irq(skb);
+}
+
+/****************************************************************
+ *     kaweth_start_xmit
+ ****************************************************************/
+static netdev_tx_t kaweth_start_xmit(struct sk_buff *skb,
+					   struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+	__le16 *private_header;
+
+	int res;
+
+	spin_lock_irq(&kaweth->device_lock);
+
+	kaweth_async_set_rx_mode(kaweth);
+	netif_stop_queue(net);
+	if (IS_BLOCKED(kaweth->status)) {
+		goto skip;
+	}
+
+	/* We now decide whether we can put our special header into the sk_buff */
+	if (skb_cloned(skb) || skb_headroom(skb) < 2) {
+		/* no such luck - we make our own */
+		struct sk_buff *copied_skb;
+		copied_skb = skb_copy_expand(skb, 2, 0, GFP_ATOMIC);
+		dev_kfree_skb_irq(skb);
+		skb = copied_skb;
+		if (!copied_skb) {
+			kaweth->stats.tx_errors++;
+			netif_start_queue(net);
+			spin_unlock_irq(&kaweth->device_lock);
+			return NETDEV_TX_OK;
+		}
+	}
+
+	private_header = (__le16 *)__skb_push(skb, 2);
+	*private_header = cpu_to_le16(skb->len-2);
+	kaweth->tx_skb = skb;
+
+	usb_fill_bulk_urb(kaweth->tx_urb,
+		      kaweth->dev,
+		      usb_sndbulkpipe(kaweth->dev, 2),
+		      private_header,
+		      skb->len,
+		      kaweth_usb_transmit_complete,
+		      kaweth);
+	kaweth->end = 0;
+
+	if((res = usb_submit_urb(kaweth->tx_urb, GFP_ATOMIC)))
+	{
+		dev_warn(&net->dev, "kaweth failed tx_urb %d\n", res);
+skip:
+		kaweth->stats.tx_errors++;
+
+		netif_start_queue(net);
+		dev_kfree_skb_irq(skb);
+	}
+	else
+	{
+		kaweth->stats.tx_packets++;
+		kaweth->stats.tx_bytes += skb->len;
+	}
+
+	spin_unlock_irq(&kaweth->device_lock);
+
+	return NETDEV_TX_OK;
+}
+
+/****************************************************************
+ *     kaweth_set_rx_mode
+ ****************************************************************/
+static void kaweth_set_rx_mode(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+
+	__u16 packet_filter_bitmap = KAWETH_PACKET_FILTER_DIRECTED |
+                                     KAWETH_PACKET_FILTER_BROADCAST |
+		                     KAWETH_PACKET_FILTER_MULTICAST;
+
+	netdev_dbg(net, "Setting Rx mode to %d\n", packet_filter_bitmap);
+
+	netif_stop_queue(net);
+
+	if (net->flags & IFF_PROMISC) {
+		packet_filter_bitmap |= KAWETH_PACKET_FILTER_PROMISCUOUS;
+	}
+	else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
+		packet_filter_bitmap |= KAWETH_PACKET_FILTER_ALL_MULTICAST;
+	}
+
+	kaweth->packet_filter_bitmap = packet_filter_bitmap;
+	netif_wake_queue(net);
+}
+
+/****************************************************************
+ *     kaweth_async_set_rx_mode
+ ****************************************************************/
+static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
+{
+	int result;
+	__u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
+
+	kaweth->packet_filter_bitmap = 0;
+	if (packet_filter_bitmap == 0)
+		return;
+
+	if (in_interrupt())
+		return;
+
+	result = kaweth_control(kaweth,
+				usb_sndctrlpipe(kaweth->dev, 0),
+				KAWETH_COMMAND_SET_PACKET_FILTER,
+				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+				packet_filter_bitmap,
+				0,
+				(void *)&kaweth->scratch,
+				0,
+				KAWETH_CONTROL_TIMEOUT);
+
+	if(result < 0) {
+		dev_err(&kaweth->intf->dev, "Failed to set Rx mode: %d\n",
+			result);
+	}
+	else {
+		netdev_dbg(kaweth->net, "Set Rx mode to %d\n",
+			   packet_filter_bitmap);
+	}
+}
+
+/****************************************************************
+ *     kaweth_netdev_stats
+ ****************************************************************/
+static struct net_device_stats *kaweth_netdev_stats(struct net_device *dev)
+{
+	struct kaweth_device *kaweth = netdev_priv(dev);
+	return &kaweth->stats;
+}
+
+/****************************************************************
+ *     kaweth_tx_timeout
+ ****************************************************************/
+static void kaweth_tx_timeout(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+
+	dev_warn(&net->dev, "%s: Tx timed out. Resetting.\n", net->name);
+	kaweth->stats.tx_errors++;
+	net->trans_start = jiffies;
+
+	usb_unlink_urb(kaweth->tx_urb);
+}
+
+/****************************************************************
+ *     kaweth_suspend
+ ****************************************************************/
+static int kaweth_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct kaweth_device *kaweth = usb_get_intfdata(intf);
+	unsigned long flags;
+
+	dev_dbg(&intf->dev, "Suspending device\n");
+	spin_lock_irqsave(&kaweth->device_lock, flags);
+	kaweth->status |= KAWETH_STATUS_SUSPENDING;
+	spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+	kaweth_kill_urbs(kaweth);
+	return 0;
+}
+
+/****************************************************************
+ *     kaweth_resume
+ ****************************************************************/
+static int kaweth_resume(struct usb_interface *intf)
+{
+	struct kaweth_device *kaweth = usb_get_intfdata(intf);
+	unsigned long flags;
+
+	dev_dbg(&intf->dev, "Resuming device\n");
+	spin_lock_irqsave(&kaweth->device_lock, flags);
+	kaweth->status &= ~KAWETH_STATUS_SUSPENDING;
+	spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+	if (!kaweth->opened)
+		return 0;
+	kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+	kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
+
+	return 0;
+}
+
+/****************************************************************
+ *     kaweth_probe
+ ****************************************************************/
+
+
+static const struct net_device_ops kaweth_netdev_ops = {
+	.ndo_open =			kaweth_open,
+	.ndo_stop =			kaweth_close,
+	.ndo_start_xmit =		kaweth_start_xmit,
+	.ndo_tx_timeout =		kaweth_tx_timeout,
+	.ndo_set_rx_mode =		kaweth_set_rx_mode,
+	.ndo_get_stats =		kaweth_netdev_stats,
+	.ndo_change_mtu =		eth_change_mtu,
+	.ndo_set_mac_address =		eth_mac_addr,
+	.ndo_validate_addr =		eth_validate_addr,
+};
+
+static int kaweth_probe(
+		struct usb_interface *intf,
+		const struct usb_device_id *id      /* from id_table */
+	)
+{
+	struct device *dev = &intf->dev;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct kaweth_device *kaweth;
+	struct net_device *netdev;
+	const eth_addr_t bcast_addr = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+	int result = 0;
+
+	dev_dbg(dev,
+		"Kawasaki Device Probe (Device number:%d): 0x%4.4x:0x%4.4x:0x%4.4x\n",
+		udev->devnum, le16_to_cpu(udev->descriptor.idVendor),
+		le16_to_cpu(udev->descriptor.idProduct),
+		le16_to_cpu(udev->descriptor.bcdDevice));
+
+	dev_dbg(dev, "Device at %p\n", udev);
+
+	dev_dbg(dev, "Descriptor length: %x type: %x\n",
+		(int)udev->descriptor.bLength,
+		(int)udev->descriptor.bDescriptorType);
+
+	netdev = alloc_etherdev(sizeof(*kaweth));
+	if (!netdev)
+		return -ENOMEM;
+
+	kaweth = netdev_priv(netdev);
+	kaweth->dev = udev;
+	kaweth->net = netdev;
+
+	spin_lock_init(&kaweth->device_lock);
+	init_waitqueue_head(&kaweth->term_wait);
+
+	dev_dbg(dev, "Resetting.\n");
+
+	kaweth_reset(kaweth);
+
+	/*
+	 * If high byte of bcdDevice is nonzero, firmware is already
+	 * downloaded. Don't try to do it again, or we'll hang the device.
+	 */
+
+	if (le16_to_cpu(udev->descriptor.bcdDevice) >> 8) {
+		dev_info(dev, "Firmware present in device.\n");
+	} else {
+		/* Download the firmware */
+		dev_info(dev, "Downloading firmware...\n");
+		kaweth->firmware_buf = (__u8 *)__get_free_page(GFP_KERNEL);
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/new_code.bin",
+						      100,
+						      2)) < 0) {
+			dev_err(dev, "Error downloading firmware (%d)\n",
+				result);
+			goto err_fw;
+		}
+
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/new_code_fix.bin",
+						      100,
+						      3)) < 0) {
+			dev_err(dev, "Error downloading firmware fix (%d)\n",
+				result);
+			goto err_fw;
+		}
+
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/trigger_code.bin",
+						      126,
+						      2)) < 0) {
+			dev_err(dev, "Error downloading trigger code (%d)\n",
+				result);
+			goto err_fw;
+
+		}
+
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/trigger_code_fix.bin",
+						      126,
+						      3)) < 0) {
+			dev_err(dev, "Error downloading trigger code fix (%d)\n", result);
+			goto err_fw;
+		}
+
+
+		if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) {
+			dev_err(dev, "Error triggering firmware (%d)\n", result);
+			goto err_fw;
+		}
+
+		/* Device will now disappear for a moment...  */
+		dev_info(dev, "Firmware loaded.  I'll be back...\n");
+err_fw:
+		free_page((unsigned long)kaweth->firmware_buf);
+		free_netdev(netdev);
+		return -EIO;
+	}
+
+	result = kaweth_read_configuration(kaweth);
+
+	if(result < 0) {
+		dev_err(dev, "Error reading configuration (%d), no net device created\n", result);
+		goto err_free_netdev;
+	}
+
+	dev_info(dev, "Statistics collection: %x\n", kaweth->configuration.statistics_mask);
+	dev_info(dev, "Multicast filter limit: %x\n", kaweth->configuration.max_multicast_filters & ((1 << 15) - 1));
+	dev_info(dev, "MTU: %d\n", le16_to_cpu(kaweth->configuration.segment_size));
+	dev_info(dev, "Read MAC address %pM\n", kaweth->configuration.hw_addr);
+
+	if(!memcmp(&kaweth->configuration.hw_addr,
+                   &bcast_addr,
+		   sizeof(bcast_addr))) {
+		dev_err(dev, "Firmware not functioning properly, no net device created\n");
+		goto err_free_netdev;
+	}
+
+	if(kaweth_set_urb_size(kaweth, KAWETH_BUF_SIZE) < 0) {
+		dev_dbg(dev, "Error setting URB size\n");
+		goto err_free_netdev;
+	}
+
+	if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) {
+		dev_err(dev, "Error setting SOFS wait\n");
+		goto err_free_netdev;
+	}
+
+	result = kaweth_set_receive_filter(kaweth,
+                                           KAWETH_PACKET_FILTER_DIRECTED |
+                                           KAWETH_PACKET_FILTER_BROADCAST |
+                                           KAWETH_PACKET_FILTER_MULTICAST);
+
+	if(result < 0) {
+		dev_err(dev, "Error setting receive filter\n");
+		goto err_free_netdev;
+	}
+
+	dev_dbg(dev, "Initializing net device.\n");
+
+	kaweth->intf = intf;
+
+	kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kaweth->tx_urb)
+		goto err_free_netdev;
+	kaweth->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kaweth->rx_urb)
+		goto err_only_tx;
+	kaweth->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kaweth->irq_urb)
+		goto err_tx_and_rx;
+
+	kaweth->intbuffer = usb_alloc_coherent(	kaweth->dev,
+						INTBUFFERSIZE,
+						GFP_KERNEL,
+						&kaweth->intbufferhandle);
+	if (!kaweth->intbuffer)
+		goto err_tx_and_rx_and_irq;
+	kaweth->rx_buf = usb_alloc_coherent(	kaweth->dev,
+						KAWETH_BUF_SIZE,
+						GFP_KERNEL,
+						&kaweth->rxbufferhandle);
+	if (!kaweth->rx_buf)
+		goto err_all_but_rxbuf;
+
+	memcpy(netdev->broadcast, &bcast_addr, sizeof(bcast_addr));
+	memcpy(netdev->dev_addr, &kaweth->configuration.hw_addr,
+               sizeof(kaweth->configuration.hw_addr));
+
+	netdev->netdev_ops = &kaweth_netdev_ops;
+	netdev->watchdog_timeo = KAWETH_TX_TIMEOUT;
+	netdev->mtu = le16_to_cpu(kaweth->configuration.segment_size);
+	netdev->ethtool_ops = &ops;
+
+	/* kaweth is zeroed as part of alloc_netdev */
+	INIT_DELAYED_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl);
+	usb_set_intfdata(intf, kaweth);
+
+#if 0
+// dma_supported() is deeply broken on almost all architectures
+	if (dma_supported (dev, 0xffffffffffffffffULL))
+		kaweth->net->features |= NETIF_F_HIGHDMA;
+#endif
+
+	SET_NETDEV_DEV(netdev, dev);
+	if (register_netdev(netdev) != 0) {
+		dev_err(dev, "Error registering netdev.\n");
+		goto err_intfdata;
+	}
+
+	dev_info(dev, "kaweth interface created at %s\n",
+		 kaweth->net->name);
+
+	dev_dbg(dev, "Kaweth probe returning.\n");
+
+	return 0;
+
+err_intfdata:
+	usb_set_intfdata(intf, NULL);
+	usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+err_all_but_rxbuf:
+	usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+err_tx_and_rx_and_irq:
+	usb_free_urb(kaweth->irq_urb);
+err_tx_and_rx:
+	usb_free_urb(kaweth->rx_urb);
+err_only_tx:
+	usb_free_urb(kaweth->tx_urb);
+err_free_netdev:
+	free_netdev(netdev);
+
+	return -EIO;
+}
+
+/****************************************************************
+ *     kaweth_disconnect
+ ****************************************************************/
+static void kaweth_disconnect(struct usb_interface *intf)
+{
+	struct kaweth_device *kaweth = usb_get_intfdata(intf);
+	struct net_device *netdev;
+
+	dev_info(&intf->dev, "Unregistering\n");
+
+	usb_set_intfdata(intf, NULL);
+	if (!kaweth) {
+		dev_warn(&intf->dev, "unregistering non-existent device\n");
+		return;
+	}
+	netdev = kaweth->net;
+
+	netdev_dbg(kaweth->net, "Unregistering net device\n");
+	unregister_netdev(netdev);
+
+	usb_free_urb(kaweth->rx_urb);
+	usb_free_urb(kaweth->tx_urb);
+	usb_free_urb(kaweth->irq_urb);
+
+	usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+	usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+
+	free_netdev(netdev);
+}
+
+
+// FIXME this completion stuff is a modified clone of
+// an OLD version of some stuff in usb.c ...
+struct usb_api_data {
+	wait_queue_head_t wqh;
+	int done;
+};
+
+/*-------------------------------------------------------------------*
+ * completion handler for compatibility wrappers (sync control/bulk) *
+ *-------------------------------------------------------------------*/
+static void usb_api_blocking_completion(struct urb *urb)
+{
+        struct usb_api_data *awd = (struct usb_api_data *)urb->context;
+
+	awd->done=1;
+	wake_up(&awd->wqh);
+}
+
+/*-------------------------------------------------------------------*
+ *                         COMPATIBILITY STUFF                       *
+ *-------------------------------------------------------------------*/
+
+// Starts urb and waits for completion or timeout
+static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
+{
+	struct usb_api_data awd;
+        int status;
+
+        init_waitqueue_head(&awd.wqh);
+        awd.done = 0;
+
+        urb->context = &awd;
+        status = usb_submit_urb(urb, GFP_ATOMIC);
+        if (status) {
+                // something went wrong
+                usb_free_urb(urb);
+                return status;
+        }
+
+	if (!wait_event_timeout(awd.wqh, awd.done, timeout)) {
+                // timeout
+                dev_warn(&urb->dev->dev, "usb_control/bulk_msg: timeout\n");
+                usb_kill_urb(urb);  // remove urb safely
+                status = -ETIMEDOUT;
+        }
+	else {
+                status = urb->status;
+	}
+
+        if (actual_length) {
+                *actual_length = urb->actual_length;
+	}
+
+        usb_free_urb(urb);
+        return status;
+}
+
+/*-------------------------------------------------------------------*/
+// returns status (negative) or length (positive)
+static int kaweth_internal_control_msg(struct usb_device *usb_dev,
+				       unsigned int pipe,
+				       struct usb_ctrlrequest *cmd, void *data,
+				       int len, int timeout)
+{
+        struct urb *urb;
+        int retv;
+        int length = 0; /* shut up GCC */
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+        if (!urb)
+                return -ENOMEM;
+
+        usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char*)cmd, data,
+			 len, usb_api_blocking_completion, NULL);
+
+        retv = usb_start_wait_urb(urb, timeout, &length);
+        if (retv < 0) {
+                return retv;
+	}
+        else {
+                return length;
+	}
+}
+
+module_usb_driver(kaweth_driver);
diff -Naur backports-4.2.6-1.org/drivers/net/usb/Kconfig backports-4.2.6-1/drivers/net/usb/Kconfig
--- backports-4.2.6-1.org/drivers/net/usb/Kconfig	2015-11-15 22:19:40.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/Kconfig	2016-06-28 14:35:17.991973886 +0200
@@ -13,7 +13,6 @@
 if USB_NET_DRIVERS
 
 config USB_CATC
-	depends on n
 	tristate "USB CATC NetMate-based Ethernet device support"
 	depends on m
 	depends on CRC32
@@ -34,7 +33,6 @@
 	  module will be called catc.
 
 config USB_KAWETH
-	depends on n
 	tristate "USB KLSI KL5USB101-based ethernet device support"
 	depends on m
 	---help---
@@ -75,7 +73,6 @@
 	  module will be called kaweth.
 
 config USB_PEGASUS
-	depends on n
 	tristate "USB Pegasus/Pegasus-II based ethernet device support"
 	depends on m
 	select BPAUTO_MII
@@ -92,7 +89,6 @@
 	  module will be called pegasus.
 
 config USB_RTL8150
-	depends on n
 	tristate "USB RTL8150 based ethernet device support"
 	depends on m
 	select BPAUTO_MII
@@ -105,7 +101,6 @@
 	  module will be called rtl8150.
 
 config USB_RTL8152
-	depends on n
 	tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
 	depends on m
 	select BPAUTO_MII
@@ -153,7 +148,6 @@
 	  module will be called usbnet.
 
 config USB_NET_AX8817X
-	depends on n
 	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
 	depends on m
 	depends on USB_USBNET
@@ -184,7 +178,6 @@
 	  what other networking devices you have in use.
 
 config USB_NET_AX88179_178A
-	depends on n
 	tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
 	depends on m
 	depends on USB_USBNET
@@ -233,7 +226,6 @@
 	  name is used instead.
 
 config USB_NET_CDC_EEM
-	depends on n
 	tristate "CDC EEM support"
 	depends on m
 	depends on USB_USBNET
@@ -269,7 +261,6 @@
 	    * Ericsson F5521gw Mobile Broadband Module
 
 config USB_NET_HUAWEI_CDC_NCM
-	depends on n
 	tristate "Huawei NCM embedded AT channel support"
 	depends on m
 	depends on USB_USBNET
@@ -305,7 +296,6 @@
 	  module will be called cdc_mbim.
 
 config USB_NET_DM9601
-	depends on n
 	tristate "Davicom DM96xx based USB 10/100 ethernet devices"
 	depends on m
 	depends on USB_USBNET
@@ -315,7 +305,6 @@
 	  based USB 10/100 Ethernet adapters.
 
 config USB_NET_SR9700
-	depends on n
 	tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
 	depends on m
 	depends on USB_USBNET
@@ -325,7 +314,6 @@
 	  10/100 Ethernet adapters.
 
 config USB_NET_SR9800
-	depends on n
 	tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
 	depends on m
 	depends on USB_USBNET
@@ -342,7 +330,6 @@
 	  module will be called sr9800.
 
 config USB_NET_SMSC75XX
-	depends on n
 	tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
 	depends on m
 	depends on USB_USBNET
@@ -354,7 +341,6 @@
 	  Gigabit Ethernet adapters.
 
 config USB_NET_SMSC95XX
-	depends on n
 	tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
 	depends on m
 	depends on USB_USBNET
@@ -366,7 +352,6 @@
 	  10/100 Ethernet adapters.
 
 config USB_NET_GL620A
-	depends on n
 	tristate "GeneSys GL620USB-A based cables"
 	depends on m
 	depends on USB_USBNET
@@ -377,7 +362,6 @@
 	  Note that the half-duplex "GL620USB" is not supported.
 
 config USB_NET_NET1080
-	depends on n
 	tristate "NetChip 1080 based cables (Laplink, ...)"
 	depends on m
 	default y
@@ -388,7 +372,6 @@
 	  optionally with LEDs that indicate traffic
 
 config USB_NET_PLUSB
-	depends on n
 	tristate "Prolific PL-2301/2302/25A1 based cables"
 	depends on m
 	# if the handshake/init/reset problems, from original 'plusb',
@@ -399,7 +382,6 @@
 	  with one of these chips.
 
 config USB_NET_MCS7830
-	depends on n
 	tristate "MosChip MCS7830 based Ethernet adapters"
 	depends on m
 	depends on USB_USBNET
@@ -425,7 +407,6 @@
 	  (and for) Microsoft; it isn't an "Open" ecosystem or market.
 
 config USB_NET_CDC_SUBSET
-	depends on n
 	tristate "Simple USB Network Links (CDC Ethernet subset)"
 	depends on m
 	depends on USB_USBNET
@@ -497,7 +478,6 @@
 	  with one of these chips.
 
 config USB_NET_ZAURUS
-	depends on n
 	tristate "Sharp Zaurus (stock ROMs) and compatible"
 	depends on m
 	depends on USB_USBNET
@@ -517,7 +497,6 @@
 	  some cases CDC MDLM) protocol, not "g_ether".
 
 config USB_NET_CX82310_ETH
-	depends on n
 	tristate "Conexant CX82310 USB ethernet port"
 	depends on m
 	depends on USB_USBNET
@@ -527,7 +506,6 @@
 	  it will not work with ADSL modems (use cxacru driver instead).
 
 config USB_NET_KALMIA
-	depends on n
 	tristate "Samsung Kalmia based LTE USB modem"
 	depends on m
 	depends on USB_USBNET
@@ -562,7 +540,6 @@
 	  module will be called qmi_wwan.
 
 config USB_HSO
-	depends on n
 	tristate "Option USB High Speed Mobile Devices"
 	depends on m
 	depends on USB && RFKILL && TTY
@@ -575,7 +552,6 @@
 	  module will be called hso.
 
 config USB_NET_INT51X1
-	depends on n
 	tristate "Intellon PLC based usb adapter"
 	depends on m
 	depends on USB_USBNET
@@ -585,7 +561,6 @@
 	  INT51x1/INT5200 chip, like the "devolo dLan duo".
 
 config USB_CDC_PHONET
-	depends on n
 	tristate "CDC Phonet support"
 	depends on m
 	depends on PHONET
@@ -595,7 +570,6 @@
 	  "PC suite" USB profile.
 
 config USB_IPHETH
-	depends on n
 	tristate "Apple iPhone USB Ethernet driver"
 	depends on m
 	default n
@@ -619,11 +593,10 @@
 	  module will be called sierra_net.
 
 config USB_VL600
-	depends on n
 	tristate "LG VL600 modem dongle"
 	depends on m
 	depends on USB_NET_CDCETHER && TTY
-	select USB_ACM
+#	depends on USB_ACM
 	help
 	  Select this if you want to use an LG Electronics 4G/LTE usb modem
 	  called VL600.  This driver only handles the ethernet
diff -Naur backports-4.2.6-1.org/drivers/net/usb/Kconfig.orig backports-4.2.6-1/drivers/net/usb/Kconfig.orig
--- backports-4.2.6-1.org/drivers/net/usb/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/Kconfig.orig	2016-06-28 14:35:17.991973886 +0200
@@ -0,0 +1,638 @@
+#
+# USB Network devices configuration
+#
+comment "Host-side USB support is needed for USB Network Adapter support"
+	depends on !USB && NET
+
+menuconfig USB_NET_DRIVERS
+	tristate "USB Network Adapters"
+	depends on m
+	default USB if USB
+	depends on USB && NET
+
+if USB_NET_DRIVERS
+
+config USB_CATC
+	depends on n
+	tristate "USB CATC NetMate-based Ethernet device support"
+	depends on m
+	depends on CRC32
+	---help---
+	  Say Y if you want to use one of the following 10Mbps USB Ethernet
+	  device based on the EL1210A chip. Supported devices are:
+	  Belkin F5U011
+	  Belkin F5U111
+	  CATC NetMate
+	  CATC NetMate II
+	  smartBridges smartNIC
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on eth0, if it is the only ethernet device, or perhaps on
+	  eth1, if you have a PCI or ISA ethernet card installed.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called catc.
+
+config USB_KAWETH
+	depends on n
+	tristate "USB KLSI KL5USB101-based ethernet device support"
+	depends on m
+	---help---
+	  Say Y here if you want to use one of the following 10Mbps only
+	  USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
+	  3Com 3C19250
+	  ADS USB-10BT
+	  ATEN USB Ethernet
+	  ASANTE USB To Ethernet Adapter
+	  AOX Endpoints USB Ethernet
+	  Correga K.K.
+	  D-Link DSB-650C and DU-E10
+	  Entrega / Portgear E45
+	  I-O DATA USB-ET/T
+	  Jaton USB Ethernet Device Adapter
+	  Kingston Technology USB Ethernet Adapter
+	  Linksys USB10T
+	  Mobility USB-Ethernet Adapter
+	  NetGear EA-101
+	  Peracom Enet and Enet2
+	  Portsmith Express Ethernet Adapter
+	  Shark Pocket Adapter
+	  SMC 2202USB
+	  Sony Vaio port extender
+
+	  This driver is likely to work with most 10Mbps only USB Ethernet
+	  adapters, including some "no brand" devices. It does NOT work on
+	  SmartBridges smartNIC or on Belkin F5U111 devices - you should use
+	  the CATC NetMate driver for those. If you are not sure which one
+	  you need, select both, and the correct one should be selected for
+	  you.
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on eth0, if it is the only ethernet device, or perhaps on
+	  eth1, if you have a PCI or ISA ethernet card installed.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kaweth.
+
+config USB_PEGASUS
+	depends on n
+	tristate "USB Pegasus/Pegasus-II based ethernet device support"
+	depends on m
+	select BPAUTO_MII
+	---help---
+	  Say Y here if you know you have Pegasus or Pegasus-II based adapter.
+	  If in doubt then look at <file:drivers/net/usb/pegasus.h> for the
+	  complete list of supported devices.
+
+	  If your particular adapter is not in the list and you are _sure_ it
+	  is Pegasus or Pegasus II based then send me
+	  <petkan@users.sourceforge.net> vendor and device IDs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pegasus.
+
+config USB_RTL8150
+	depends on n
+	tristate "USB RTL8150 based ethernet device support"
+	depends on m
+	select BPAUTO_MII
+	help
+	  Say Y here if you have RTL8150 based usb-ethernet adapter.
+	  Send me <petkan@users.sourceforge.net> any comments you may have.
+	  You can also check for updates at <http://pegasus2.sourceforge.net/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtl8150.
+
+config USB_RTL8152
+	depends on n
+	tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
+	depends on m
+	select BPAUTO_MII
+	help
+	  This option adds support for Realtek RTL8152 based USB 2.0
+	  10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
+	  Ethernet adapters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called r8152.
+
+config USB_USBNET
+	tristate "Multi-purpose USB Networking Framework"
+	depends on m
+	select BPAUTO_MII
+	---help---
+	  This driver supports several kinds of network links over USB,
+	  with "minidrivers" built around a common network driver core
+	  that supports deep queues for efficient transfers.  (This gives
+	  better performance with small packets and at high speeds).
+
+	  The USB host runs "usbnet", and the other end of the link might be:
+
+	  - Another USB host, when using USB "network" or "data transfer"
+	    cables.  These are often used to network laptops to PCs, like
+	    "Laplink" parallel cables or some motherboards.  These rely
+	    on specialized chips from many suppliers.
+
+	  - An intelligent USB gadget, perhaps embedding a Linux system.
+	    These include PDAs running Linux (iPaq, Yopy, Zaurus, and
+	    others), and devices that interoperate using the standard
+	    CDC-Ethernet specification (including many cable modems).
+
+	  - Network adapter hardware (like those for 10/100 Ethernet) which
+	    uses this driver framework.
+
+	  The link will appear with a name like "usb0", when the link is
+	  a two-node link, or "eth0" for most CDC-Ethernet devices.  Those
+	  two-node links are most easily managed with Ethernet Bridging
+	  (CONFIG_BRIDGE) instead of routing.
+
+	  For more information see <http://www.linux-usb.org/usbnet/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbnet.
+
+config USB_NET_AX8817X
+	depends on n
+	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
+	depends on m
+	depends on USB_USBNET
+	depends on CRC32
+	depends on PHYLIB
+	default y
+	help
+	  This option adds support for ASIX AX88xxx based USB 2.0
+	  10/100 Ethernet adapters.
+
+ 	  This driver should work with at least the following devices:
+	    * Aten UC210T
+	    * ASIX AX88172
+	    * Billionton Systems, USB2AR
+	    * Buffalo LUA-U2-KTX
+	    * Corega FEther USB2-TX
+	    * D-Link DUB-E100
+	    * Hawking UF200
+	    * Linksys USB200M
+	    * Netgear FA120
+	    * Sitecom LN-029
+	    * Sitecom LN-028
+	    * Intellinet USB 2.0 Ethernet
+	    * ST Lab USB 2.0 Ethernet
+	    * TrendNet TU2-ET100
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.
+
+config USB_NET_AX88179_178A
+	depends on n
+	tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+	depends on m
+	depends on USB_USBNET
+	depends on CRC32
+	depends on PHYLIB
+	default y
+	help
+	  This option adds support for ASIX AX88179 based USB 3.0/2.0
+	  to Gigabit Ethernet adapters.
+
+	  This driver should work with at least the following devices:
+	    * ASIX AX88179
+	    * ASIX AX88178A
+	    * Sitcomm LN-032
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.
+
+config USB_NET_CDCETHER
+	tristate "CDC Ethernet support (smart devices such as cable modems)"
+	depends on m
+	depends on USB_USBNET
+	default y
+	help
+	  This option supports devices conforming to the Communication Device
+	  Class (CDC) Ethernet Control Model, a specification that's easy to
+	  implement in device firmware.  The CDC specifications are available
+	  from <http://www.usb.org/>.
+
+	  CDC Ethernet is an implementation option for DOCSIS cable modems
+	  that support USB connectivity, used for non-Microsoft USB hosts.
+	  The Linux-USB CDC Ethernet Gadget driver is an open implementation.
+ 	  This driver should work with at least the following devices:
+
+	    * Dell Wireless 5530 HSPA
+ 	    * Ericsson PipeRider (all variants)
+	    * Ericsson Mobile Broadband Module (all variants)
+ 	    * Motorola (DM100 and SB4100)
+ 	    * Broadcom Cable Modem (reference design)
+	    * Toshiba (PCX1100U and F3507g/F3607gw)
+	    * ...
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.  However, if the
+	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
+	  name is used instead.
+
+config USB_NET_CDC_EEM
+	depends on n
+	tristate "CDC EEM support"
+	depends on m
+	depends on USB_USBNET
+	help
+	  This option supports devices conforming to the Communication Device
+	  Class (CDC) Ethernet Emulation Model, a specification that's easy to
+	  implement in device firmware.  The CDC EEM specifications are available
+	  from <http://www.usb.org/>.
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.  However, if the
+	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
+	  name is used instead.
+
+config USB_NET_CDC_NCM
+	tristate "CDC NCM support"
+	depends on m
+	depends on USB_USBNET
+	default y
+	help
+	  This driver provides support for CDC NCM (Network Control Model
+	  Device USB Class Specification). The CDC NCM specification is
+	  available from <http://www.usb.org/>.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module.
+
+	  This driver should work with at least the following devices:
+	    * ST-Ericsson M700 LTE FDD/TDD Mobile Broadband Modem (ref. design)
+	    * ST-Ericsson M5730 HSPA+ Mobile Broadband Modem (reference design)
+	    * ST-Ericsson M570 HSPA+ Mobile Broadband Modem (reference design)
+	    * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design)
+	    * Ericsson F5521gw Mobile Broadband Module
+
+config USB_NET_HUAWEI_CDC_NCM
+	depends on n
+	tristate "Huawei NCM embedded AT channel support"
+	depends on m
+	depends on USB_USBNET
+	select USB_WDM
+	select USB_NET_CDC_NCM
+	help
+		This driver supports huawei-style NCM devices, that use NCM as a
+		transport for other protocols, usually an embedded AT channel.
+		Good examples are:
+		* Huawei E3131
+		* Huawei E3251
+
+		To compile this driver as a module, choose M here: the module will be
+		called huawei_cdc_ncm.ko.
+
+config USB_NET_CDC_MBIM
+	tristate "CDC MBIM support"
+	depends on m
+	depends on USB_USBNET
+	select USB_WDM
+	select USB_NET_CDC_NCM
+	help
+	  This driver provides support for CDC MBIM (Mobile Broadband
+	  Interface Model) devices. The CDC MBIM specification is
+	  available from <http://www.usb.org/>.
+
+	  MBIM devices require configuration using the management
+	  protocol defined by the MBIM specification.  This driver
+	  provides unfiltered access to the MBIM control channel
+	  through the associated /dev/cdc-wdmx character device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cdc_mbim.
+
+config USB_NET_DM9601
+	depends on n
+	tristate "Davicom DM96xx based USB 10/100 ethernet devices"
+	depends on m
+	depends on USB_USBNET
+	depends on CRC32
+	help
+	  This option adds support for Davicom DM9601/DM9620/DM9621A
+	  based USB 10/100 Ethernet adapters.
+
+config USB_NET_SR9700
+	depends on n
+	tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
+	depends on m
+	depends on USB_USBNET
+	depends on CRC32
+	help
+	  This option adds support for CoreChip-sz SR9700 based USB 1.1
+	  10/100 Ethernet adapters.
+
+config USB_NET_SR9800
+	depends on n
+	tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
+	depends on m
+	depends on USB_USBNET
+	depends on CRC32
+	---help---
+	  Say Y if you want to use one of the following 100Mbps USB Ethernet
+	  device based on the CoreChip-sz SR9800 chip.
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on eth0, if it is the only ethernet device, or perhaps on
+	  eth1, if you have a PCI or ISA ethernet card installed.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sr9800.
+
+config USB_NET_SMSC75XX
+	depends on n
+	tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
+	depends on m
+	depends on USB_USBNET
+	depends on BITREVERSE
+	depends on CRC16
+	depends on CRC32
+	help
+	  This option adds support for SMSC LAN75XX based USB 2.0
+	  Gigabit Ethernet adapters.
+
+config USB_NET_SMSC95XX
+	depends on n
+	tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
+	depends on m
+	depends on USB_USBNET
+	depends on BITREVERSE
+	depends on CRC16
+	depends on CRC32
+	help
+	  This option adds support for SMSC LAN95XX based USB 2.0
+	  10/100 Ethernet adapters.
+
+config USB_NET_GL620A
+	depends on n
+	tristate "GeneSys GL620USB-A based cables"
+	depends on m
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a host-to-host cable,
+	  or PC2PC motherboard, with this chip.
+
+	  Note that the half-duplex "GL620USB" is not supported.
+
+config USB_NET_NET1080
+	depends on n
+	tristate "NetChip 1080 based cables (Laplink, ...)"
+	depends on m
+	default y
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a host-to-host cable based
+	  on this design:  one NetChip 1080 chip and supporting logic,
+	  optionally with LEDs that indicate traffic
+
+config USB_NET_PLUSB
+	depends on n
+	tristate "Prolific PL-2301/2302/25A1 based cables"
+	depends on m
+	# if the handshake/init/reset problems, from original 'plusb',
+	# are ever resolved ... then remove "experimental"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a host-to-host cable
+	  with one of these chips.
+
+config USB_NET_MCS7830
+	depends on n
+	tristate "MosChip MCS7830 based Ethernet adapters"
+	depends on m
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a 10/100 Ethernet USB2
+	  adapter based on the MosChip 7830 controller. This includes
+	  adapters marketed under the DeLOCK brand.
+
+config USB_NET_RNDIS_HOST
+	tristate "Host for RNDIS and ActiveSync devices"
+	depends on m
+	depends on USB_USBNET
+	select USB_NET_CDCETHER
+	help
+	  This option enables hosting "Remote NDIS" USB networking links,
+	  as encouraged by Microsoft (instead of CDC Ethernet!) for use in
+	  various devices that may only support this protocol.  A variant
+	  of this protocol (with even less public documentation) seems to
+	  be at the root of Microsoft's "ActiveSync" too.
+
+	  Avoid using this protocol unless you have no better options.
+	  The protocol specification is incomplete, and is controlled by
+	  (and for) Microsoft; it isn't an "Open" ecosystem or market.
+
+config USB_NET_CDC_SUBSET
+	depends on n
+	tristate "Simple USB Network Links (CDC Ethernet subset)"
+	depends on m
+	depends on USB_USBNET
+	default y
+	help
+	  This driver module supports USB network devices that can work
+	  without any device-specific information.  Select it if you have
+	  one of these drivers.
+
+	  Note that while many USB host-to-host cables can work in this mode,
+	  that may mean not being able to talk to Win32 systems or more
+	  commonly not being able to handle certain events (like replugging
+	  the host on the other end) very well.  Also, these devices will
+	  not generally have permanently assigned Ethernet addresses.
+
+config USB_ALI_M5632
+	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
+	depends on USB_NET_CDC_SUBSET
+	help
+	  Choose this option if you're using a host-to-host cable
+	  based on this design, which supports USB 2.0 high speed.
+
+config USB_AN2720
+	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+	depends on USB_NET_CDC_SUBSET
+	help
+	  Choose this option if you're using a host-to-host cable
+	  based on this design.  Note that AnchorChips is now a
+	  Cypress brand.
+
+config USB_BELKIN
+	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
+	depends on USB_NET_CDC_SUBSET
+	default y
+	help
+	  Choose this option if you're using a host-to-host cable
+	  based on this design:  two NetChip 2890 chips and an Atmel
+	  microcontroller, with LEDs that indicate traffic.
+
+config USB_ARMLINUX
+	bool "Embedded ARM Linux links (iPaq, ...)"
+	depends on USB_NET_CDC_SUBSET
+	default y
+	help
+	  Choose this option to support the "usb-eth" networking driver
+	  used by most of the ARM Linux community with device controllers
+	  such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
+	  in some PXA versions of the "blob" boot loader.
+
+	  Linux-based "Gumstix" PXA-25x based systems use this protocol
+	  to talk with other Linux systems.
+
+	  Although the ROMs shipped with Sharp Zaurus products use a
+	  different link level framing protocol, you can have them use
+	  this simpler protocol by installing a different kernel.
+
+config USB_EPSON2888
+	bool "Epson 2888 based firmware (DEVELOPMENT)"
+	depends on USB_NET_CDC_SUBSET
+	help
+	  Choose this option to support the usb networking links used
+	  by some sample firmware from Epson.
+
+config USB_KC2190
+	bool "KT Technology KC2190 based cables (InstaNet)"
+	depends on USB_NET_CDC_SUBSET
+	help
+	  Choose this option if you're using a host-to-host cable
+	  with one of these chips.
+
+config USB_NET_ZAURUS
+	depends on n
+	tristate "Sharp Zaurus (stock ROMs) and compatible"
+	depends on m
+	depends on USB_USBNET
+	select USB_NET_CDCETHER
+	depends on CRC32
+	default y
+	help
+	  Choose this option to support the usb networking links used by
+	  Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
+	  This also supports some related device firmware, as used in some
+	  PDAs from Olympus and some cell phones from Motorola.
+
+	  If you install an alternate image, such as the Linux 2.6 based
+	  versions of OpenZaurus, you should no longer need to support this
+	  protocol.  Only the "eth-fd" or "net_fd" drivers in these devices
+	  really need this non-conformant variant of CDC Ethernet (or in
+	  some cases CDC MDLM) protocol, not "g_ether".
+
+config USB_NET_CX82310_ETH
+	depends on n
+	tristate "Conexant CX82310 USB ethernet port"
+	depends on m
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a Conexant CX82310-based ADSL
+	  router with USB ethernet port. This driver is for routers only,
+	  it will not work with ADSL modems (use cxacru driver instead).
+
+config USB_NET_KALMIA
+	depends on n
+	tristate "Samsung Kalmia based LTE USB modem"
+	depends on m
+	depends on USB_USBNET
+	help
+	  Choose this option if you have a Samsung Kalmia based USB modem
+	  as Samsung GT-B3730.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kalmia.
+
+config USB_NET_QMI_WWAN
+	tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems"
+	depends on m
+	depends on USB_USBNET
+	select USB_WDM
+	help
+	  Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem
+	  (MDM) chipsets.  Examples of such devices are
+	    * Huawei E392/E398
+
+	  This driver will only drive the ethernet part of the chips.
+	  The devices require additional configuration to be usable.
+	  Multiple management interfaces with linux drivers are
+	  available:
+
+	    * option: AT commands on /dev/ttyUSBx
+	    * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx
+
+	  A modem manager with support for QMI is recommended.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qmi_wwan.
+
+config USB_HSO
+	depends on n
+	tristate "Option USB High Speed Mobile Devices"
+	depends on m
+	depends on USB && RFKILL && TTY
+	default n
+	help
+	  Choose this option if you have an Option HSDPA/HSUPA card.
+	  These cards support downlink speeds of 7.2Mbps or greater.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hso.
+
+config USB_NET_INT51X1
+	depends on n
+	tristate "Intellon PLC based usb adapter"
+	depends on m
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a 14Mb USB-based PLC
+	  (Powerline Communications) solution with an Intellon
+	  INT51x1/INT5200 chip, like the "devolo dLan duo".
+
+config USB_CDC_PHONET
+	depends on n
+	tristate "CDC Phonet support"
+	depends on m
+	depends on PHONET
+	help
+	  Choose this option to support the Phonet interface to a Nokia
+	  cellular modem, as found on most Nokia handsets with the
+	  "PC suite" USB profile.
+
+config USB_IPHETH
+	depends on n
+	tristate "Apple iPhone USB Ethernet driver"
+	depends on m
+	default n
+	---help---
+	  Module used to share Internet connection (tethering) from your
+	  iPhone (Original, 3G and 3GS) to your system.
+	  Note that you need userspace libraries and programs that are needed
+	  to pair your device with your system and that understand the iPhone
+	  protocol.
+
+	  For more information: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+
+config USB_SIERRA_NET
+	tristate "USB-to-WWAN Driver for Sierra Wireless modems"
+	depends on m
+	depends on USB_USBNET
+	help
+	  Choose this option if you have a Sierra Wireless USB-to-WWAN device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra_net.
+
+config USB_VL600
+	depends on n
+	tristate "LG VL600 modem dongle"
+	depends on m
+	depends on USB_NET_CDCETHER && TTY
+	select USB_ACM
+	help
+	  Select this if you want to use an LG Electronics 4G/LTE usb modem
+	  called VL600.  This driver only handles the ethernet
+	  interface exposed by the modem firmware.  To establish a connection
+	  you will first need a userspace program that sends the right
+	  command to the modem through its CDC ACM port, and most
+	  likely also a DHCP client.  See this thread about using the
+	  4G modem from Verizon:
+
+	  http://ubuntuforums.org/showpost.php?p=10589647&postcount=17
+
+endif # USB_NET_DRIVERS
diff -Naur backports-4.2.6-1.org/drivers/net/usb/lg-vl600.c backports-4.2.6-1/drivers/net/usb/lg-vl600.c
--- backports-4.2.6-1.org/drivers/net/usb/lg-vl600.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/lg-vl600.c	2016-06-28 14:35:17.991973886 +0200
@@ -0,0 +1,353 @@
+/*
+ * Ethernet interface part of the LG VL600 LTE modem (4G dongle)
+ *
+ * Copyright (C) 2011 Intel Corporation
+ * Author: Andrzej Zaborowski <balrogg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/module.h>
+
+/*
+ * The device has a CDC ACM port for modem control (it claims to be
+ * CDC ACM anyway) and a CDC Ethernet port for actual network data.
+ * It will however ignore data on both ports that is not encapsulated
+ * in a specific way, any data returned is also encapsulated the same
+ * way.  The headers don't seem to follow any popular standard.
+ *
+ * This driver adds and strips these headers from the ethernet frames
+ * sent/received from the CDC Ethernet port.  The proprietary header
+ * replaces the standard ethernet header in a packet so only actual
+ * ethernet frames are allowed.  The headers allow some form of
+ * multiplexing by using non standard values of the .h_proto field.
+ * Windows/Mac drivers do send a couple of such frames to the device
+ * during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
+ * seems to be) a flag in the .dummy_flags.  This doesn't seem necessary
+ * for modem operation but can possibly be used for GPS or other funcitons.
+ */
+
+struct vl600_frame_hdr {
+	__le32 len;
+	__le32 serial;
+	__le32 pkt_cnt;
+	__le32 dummy_flags;
+	__le32 dummy;
+	__le32 magic;
+} __attribute__((packed));
+
+struct vl600_pkt_hdr {
+	__le32 dummy[2];
+	__le32 len;
+	__be16 h_proto;
+} __attribute__((packed));
+
+struct vl600_state {
+	struct sk_buff *current_rx_buf;
+};
+
+static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	struct vl600_state *s = kzalloc(sizeof(struct vl600_state), GFP_KERNEL);
+
+	if (!s)
+		return -ENOMEM;
+
+	ret = usbnet_cdc_bind(dev, intf);
+	if (ret) {
+		kfree(s);
+		return ret;
+	}
+
+	dev->driver_priv = s;
+
+	/* ARP packets don't go through, but they're also of no use.  The
+	 * subnet has only two hosts anyway: us and the gateway / DHCP
+	 * server (probably simulated by modem firmware or network operator)
+	 * whose address changes everytime we connect to the intarwebz and
+	 * who doesn't bother answering ARP requests either.  So hardware
+	 * addresses have no meaning, the destination and the source of every
+	 * packet depend only on whether it is on the IN or OUT endpoint.  */
+	dev->net->flags |= IFF_NOARP;
+	/* IPv6 NDP relies on multicast.  Enable it by default. */
+	dev->net->flags |= IFF_MULTICAST;
+
+	return ret;
+}
+
+static void vl600_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct vl600_state *s = dev->driver_priv;
+
+	if (s->current_rx_buf)
+		dev_kfree_skb(s->current_rx_buf);
+
+	kfree(s);
+
+	return usbnet_cdc_unbind(dev, intf);
+}
+
+static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	struct ethhdr *ethhdr;
+	int packet_len, count;
+	struct sk_buff *buf = skb;
+	struct sk_buff *clone;
+	struct vl600_state *s = dev->driver_priv;
+
+	/* Frame lengths are generally 4B multiplies but every couple of
+	 * hours there's an odd number of bytes sized yet correct frame,
+	 * so don't require this.  */
+
+	/* Allow a packet (or multiple packets batched together) to be
+	 * split across many frames.  We don't allow a new batch to
+	 * begin in the same frame another one is ending however, and no
+	 * leading or trailing pad bytes.  */
+	if (s->current_rx_buf) {
+		frame = (struct vl600_frame_hdr *) s->current_rx_buf->data;
+		if (skb->len + s->current_rx_buf->len >
+				le32_to_cpup(&frame->len)) {
+			netif_err(dev, ifup, dev->net, "Fragment too long\n");
+			dev->net->stats.rx_length_errors++;
+			goto error;
+		}
+
+		buf = s->current_rx_buf;
+		memcpy(skb_put(buf, skb->len), skb->data, skb->len);
+	} else if (skb->len < 4) {
+		netif_err(dev, ifup, dev->net, "Frame too short\n");
+		dev->net->stats.rx_length_errors++;
+		goto error;
+	}
+
+	frame = (struct vl600_frame_hdr *) buf->data;
+	/* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+	 * otherwise we may run out of memory w/a bad packet */
+	if (ntohl(frame->magic) != 0x53544448 &&
+			ntohl(frame->magic) != 0x44544d48)
+		goto error;
+
+	if (buf->len < sizeof(*frame) ||
+			buf->len != le32_to_cpup(&frame->len)) {
+		/* Save this fragment for later assembly */
+		if (s->current_rx_buf)
+			return 0;
+
+		s->current_rx_buf = skb_copy_expand(skb, 0,
+				le32_to_cpup(&frame->len), GFP_ATOMIC);
+		if (!s->current_rx_buf) {
+			netif_err(dev, ifup, dev->net, "Reserving %i bytes "
+					"for packet assembly failed.\n",
+					le32_to_cpup(&frame->len));
+			dev->net->stats.rx_errors++;
+		}
+
+		return 0;
+	}
+
+	count = le32_to_cpup(&frame->pkt_cnt);
+
+	skb_pull(buf, sizeof(*frame));
+
+	while (count--) {
+		if (buf->len < sizeof(*packet)) {
+			netif_err(dev, ifup, dev->net, "Packet too short\n");
+			goto error;
+		}
+
+		packet = (struct vl600_pkt_hdr *) buf->data;
+		packet_len = sizeof(*packet) + le32_to_cpup(&packet->len);
+		if (packet_len > buf->len) {
+			netif_err(dev, ifup, dev->net,
+					"Bad packet length stored in header\n");
+			goto error;
+		}
+
+		/* Packet header is same size as the ethernet header
+		 * (sizeof(*packet) == sizeof(*ethhdr)), additionally
+		 * the h_proto field is in the same place so we just leave it
+		 * alone and fill in the remaining fields.
+		 */
+		ethhdr = (struct ethhdr *) skb->data;
+		if (be16_to_cpup(&ethhdr->h_proto) == ETH_P_ARP &&
+				buf->len > 0x26) {
+			/* Copy the addresses from packet contents */
+			memcpy(ethhdr->h_source,
+					&buf->data[sizeof(*ethhdr) + 0x8],
+					ETH_ALEN);
+			memcpy(ethhdr->h_dest,
+					&buf->data[sizeof(*ethhdr) + 0x12],
+					ETH_ALEN);
+		} else {
+			eth_zero_addr(ethhdr->h_source);
+			memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+			/* Inbound IPv6 packets have an IPv4 ethertype (0x800)
+			 * for some reason.  Peek at the L3 header to check
+			 * for IPv6 packets, and set the ethertype to IPv6
+			 * (0x86dd) so Linux can understand it.
+			 */
+			if ((buf->data[sizeof(*ethhdr)] & 0xf0) == 0x60)
+				ethhdr->h_proto = htons(ETH_P_IPV6);
+		}
+
+		if (count) {
+			/* Not the last packet in this batch */
+			clone = skb_clone(buf, GFP_ATOMIC);
+			if (!clone)
+				goto error;
+
+			skb_trim(clone, packet_len);
+			usbnet_skb_return(dev, clone);
+
+			skb_pull(buf, (packet_len + 3) & ~3);
+		} else {
+			skb_trim(buf, packet_len);
+
+			if (s->current_rx_buf) {
+				usbnet_skb_return(dev, buf);
+				s->current_rx_buf = NULL;
+				return 0;
+			}
+
+			return 1;
+		}
+	}
+
+error:
+	if (s->current_rx_buf) {
+		dev_kfree_skb_any(s->current_rx_buf);
+		s->current_rx_buf = NULL;
+	}
+	dev->net->stats.rx_errors++;
+	return 0;
+}
+
+static struct sk_buff *vl600_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *ret;
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	static uint32_t serial = 1;
+	int orig_len = skb->len - sizeof(struct ethhdr);
+	int full_len = (skb->len + sizeof(struct vl600_frame_hdr) + 3) & ~3;
+
+	frame = (struct vl600_frame_hdr *) skb->data;
+	if (skb->len > sizeof(*frame) && skb->len == le32_to_cpup(&frame->len))
+		return skb; /* Already encapsulated? */
+
+	if (skb->len < sizeof(struct ethhdr))
+		/* Drop, device can only deal with ethernet packets */
+		return NULL;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if (tailroom >= full_len - skb->len - sizeof(*frame) &&
+				headroom >= sizeof(*frame))
+			/* There's enough head and tail room */
+			goto encapsulate;
+
+		if (headroom + tailroom + skb->len >= full_len) {
+			/* There's enough total room, just readjust */
+			skb->data = memmove(skb->head + sizeof(*frame),
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto encapsulate;
+		}
+	}
+
+	/* Alloc a new skb with the required size */
+	ret = skb_copy_expand(skb, sizeof(struct vl600_frame_hdr), full_len -
+			skb->len - sizeof(struct vl600_frame_hdr), flags);
+	dev_kfree_skb_any(skb);
+	if (!ret)
+		return ret;
+	skb = ret;
+
+encapsulate:
+	/* Packet header is same size as ethernet packet header
+	 * (sizeof(*packet) == sizeof(struct ethhdr)), additionally the
+	 * h_proto field is in the same place so we just leave it alone and
+	 * overwrite the remaining fields.
+	 */
+	packet = (struct vl600_pkt_hdr *) skb->data;
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Since this modem only supports IPv4 and IPv6, just set all
+	 * frames to 0x0800 (ETH_P_IP)
+	 */
+	packet->h_proto = htons(ETH_P_IP);
+	memset(&packet->dummy, 0, sizeof(packet->dummy));
+	packet->len = cpu_to_le32(orig_len);
+
+	frame = (struct vl600_frame_hdr *) skb_push(skb, sizeof(*frame));
+	memset(frame, 0, sizeof(*frame));
+	frame->len = cpu_to_le32(full_len);
+	frame->serial = cpu_to_le32(serial++);
+	frame->pkt_cnt = cpu_to_le32(1);
+
+	if (skb->len < full_len) /* Pad */
+		skb_put(skb, full_len - skb->len);
+
+	return skb;
+}
+
+static const struct driver_info	vl600_info = {
+	.description	= "LG VL600 modem",
+	.flags		= FLAG_RX_ASSEMBLE | FLAG_WWAN,
+	.bind		= vl600_bind,
+	.unbind		= vl600_unbind,
+	.status		= usbnet_cdc_status,
+	.rx_fixup	= vl600_rx_fixup,
+	.tx_fixup	= vl600_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+				USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+		.driver_info	= (unsigned long) &vl600_info,
+	},
+	{},	/* End */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver lg_vl600_driver = {
+	.name		= "lg-vl600",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(lg_vl600_driver);
+
+MODULE_AUTHOR("Anrzej Zaborowski");
+MODULE_DESCRIPTION("LG-VL600 modem's ethernet link");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/Makefile backports-4.2.6-1/drivers/net/usb/Makefile
--- backports-4.2.6-1.org/drivers/net/usb/Makefile	2015-11-15 22:19:40.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/Makefile	2016-06-28 14:35:17.991973886 +0200
@@ -1,39 +1,40 @@
 #
 # Makefile for USB Network drivers
 #
-#
-#obj-$(CPTCFG_USB_CATC)		+= catc.o
-#obj-$(CPTCFG_USB_KAWETH)	+= kaweth.o
-#obj-$(CPTCFG_USB_PEGASUS)	+= pegasus.o
-#obj-$(CPTCFG_USB_RTL8150)	+= rtl8150.o
-#obj-$(CPTCFG_USB_RTL8152)	+= r8152.o
-#obj-$(CPTCFG_USB_HSO)		+= hso.o
-#obj-$(CPTCFG_USB_NET_AX8817X)	+= asix.o
-#obj-$(CPTCFG_USB_NET_AX88179_178A)      += ax88179_178a.o
+
+obj-$(CPTCFG_USB_CATC)		+= catc.o
+obj-$(CPTCFG_USB_KAWETH)	+= kaweth.o
+obj-$(CPTCFG_USB_PEGASUS)	+= pegasus.o
+obj-$(CPTCFG_USB_RTL8150)	+= rtl8150.o
+obj-$(CPTCFG_USB_RTL8152)	+= r8152.o
+obj-$(CPTCFG_USB_HSO)		+= hso.o
+obj-$(CPTCFG_USB_NET_AX8817X)	+= asix.o
+asix-y := asix_devices.o asix_common.o ax88172a.o
+obj-$(CPTCFG_USB_NET_AX88179_178A)      += ax88179_178a.o
 obj-$(CPTCFG_USB_NET_CDCETHER)	+= cdc_ether.o
-#obj-$(CPTCFG_USB_NET_CDC_EEM)	+= cdc_eem.o
-#obj-$(CPTCFG_USB_NET_DM9601)	+= dm9601.o
-#obj-$(CPTCFG_USB_NET_SR9700)	+= sr9700.o
-#obj-$(CPTCFG_USB_NET_SR9800)	+= sr9800.o
-#obj-$(CPTCFG_USB_NET_SMSC75XX)	+= smsc75xx.o
-#obj-$(CPTCFG_USB_NET_SMSC95XX)	+= smsc95xx.o
-#obj-$(CPTCFG_USB_NET_GL620A)	+= gl620a.o
-#obj-$(CPTCFG_USB_NET_NET1080)	+= net1080.o
-#obj-$(CPTCFG_USB_NET_PLUSB)	+= plusb.o
+obj-$(CPTCFG_USB_NET_CDC_EEM)	+= cdc_eem.o
+obj-$(CPTCFG_USB_NET_DM9601)	+= dm9601.o
+obj-$(CPTCFG_USB_NET_SR9700)	+= sr9700.o
+obj-$(CPTCFG_USB_NET_SR9800)	+= sr9800.o
+obj-$(CPTCFG_USB_NET_SMSC75XX)	+= smsc75xx.o
+obj-$(CPTCFG_USB_NET_SMSC95XX)	+= smsc95xx.o
+obj-$(CPTCFG_USB_NET_GL620A)	+= gl620a.o
+obj-$(CPTCFG_USB_NET_NET1080)	+= net1080.o
+obj-$(CPTCFG_USB_NET_PLUSB)	+= plusb.o
 obj-$(CPTCFG_USB_NET_RNDIS_HOST)	+= rndis_host.o
-#obj-$(CPTCFG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
-#obj-$(CPTCFG_USB_NET_ZAURUS)	+= zaurus.o
-#obj-$(CPTCFG_USB_NET_MCS7830)	+= mcs7830.o
+obj-$(CPTCFG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
+obj-$(CPTCFG_USB_NET_ZAURUS)	+= zaurus.o
+obj-$(CPTCFG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CPTCFG_USB_USBNET)	+= usbnet.o
-#obj-$(CPTCFG_USB_NET_INT51X1)	+= int51x1.o
-#obj-$(CPTCFG_USB_CDC_PHONET)	+= cdc-phonet.o
-#obj-$(CPTCFG_USB_NET_KALMIA)	+= kalmia.o
-#obj-$(CPTCFG_USB_IPHETH)	+= ipheth.o
+obj-$(CPTCFG_USB_NET_INT51X1)	+= int51x1.o
+obj-$(CPTCFG_USB_CDC_PHONET)	+= cdc-phonet.o
+obj-$(CPTCFG_USB_NET_KALMIA)	+= kalmia.o
+obj-$(CPTCFG_USB_IPHETH)	+= ipheth.o
 obj-$(CPTCFG_USB_SIERRA_NET)	+= sierra_net.o
-#obj-$(CPTCFG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
+obj-$(CPTCFG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
 obj-$(CPTCFG_USB_NET_CDC_NCM)	+= cdc_ncm.o
-#obj-$(CPTCFG_USB_NET_HUAWEI_CDC_NCM)	+= huawei_cdc_ncm.o
-#obj-$(CPTCFG_USB_VL600)		+= lg-vl600.o
+obj-$(CPTCFG_USB_NET_HUAWEI_CDC_NCM)	+= huawei_cdc_ncm.o
+obj-$(CPTCFG_USB_VL600)		+= lg-vl600.o
 obj-$(CPTCFG_USB_NET_QMI_WWAN)	+= qmi_wwan.o
 obj-$(CPTCFG_USB_NET_CDC_MBIM)	+= cdc_mbim.o
 
diff -Naur backports-4.2.6-1.org/drivers/net/usb/mcs7830.c backports-4.2.6-1/drivers/net/usb/mcs7830.c
--- backports-4.2.6-1.org/drivers/net/usb/mcs7830.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/mcs7830.c	2016-06-28 14:35:17.995307218 +0200
@@ -0,0 +1,643 @@
+/*
+ * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
+ *
+ * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
+ *
+ * Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
+ * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
+ *
+ * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
+ *             per active notification by manufacturer
+ *
+ * TODO:
+ * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
+ * - implement ethtool_ops get_pauseparam/set_pauseparam
+ *   via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
+ * - implement get_eeprom/[set_eeprom]
+ * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
+ * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
+ *   can access only ~ 24, remaining user buffer is uninitialized garbage
+ * - anything else?
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+/* requests */
+#define MCS7830_RD_BMREQ	(USB_DIR_IN  | USB_TYPE_VENDOR | \
+				 USB_RECIP_DEVICE)
+#define MCS7830_WR_BMREQ	(USB_DIR_OUT | USB_TYPE_VENDOR | \
+				 USB_RECIP_DEVICE)
+#define MCS7830_RD_BREQ		0x0E
+#define MCS7830_WR_BREQ		0x0D
+
+#define MCS7830_CTRL_TIMEOUT	1000
+#define MCS7830_MAX_MCAST	64
+
+#define MCS7830_VENDOR_ID	0x9710
+#define MCS7832_PRODUCT_ID	0x7832
+#define MCS7830_PRODUCT_ID	0x7830
+#define MCS7730_PRODUCT_ID	0x7730
+
+#define SITECOM_VENDOR_ID	0x0DF6
+#define LN_030_PRODUCT_ID	0x0021
+
+#define MCS7830_MII_ADVERTISE	(ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
+				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
+				 ADVERTISE_10HALF | ADVERTISE_CSMA)
+
+/* HIF_REG_XX corresponding index value */
+enum {
+	HIF_REG_MULTICAST_HASH			= 0x00,
+	HIF_REG_PACKET_GAP1			= 0x08,
+	HIF_REG_PACKET_GAP2			= 0x09,
+	HIF_REG_PHY_DATA			= 0x0a,
+	HIF_REG_PHY_CMD1			= 0x0c,
+	   HIF_REG_PHY_CMD1_READ		= 0x40,
+	   HIF_REG_PHY_CMD1_WRITE		= 0x20,
+	   HIF_REG_PHY_CMD1_PHYADDR		= 0x01,
+	HIF_REG_PHY_CMD2			= 0x0d,
+	   HIF_REG_PHY_CMD2_PEND_FLAG_BIT	= 0x80,
+	   HIF_REG_PHY_CMD2_READY_FLAG_BIT	= 0x40,
+	HIF_REG_CONFIG				= 0x0e,
+	/* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
+	   HIF_REG_CONFIG_CFG			= 0x80,
+	   HIF_REG_CONFIG_SPEED100		= 0x40,
+	   HIF_REG_CONFIG_FULLDUPLEX_ENABLE	= 0x20,
+	   HIF_REG_CONFIG_RXENABLE		= 0x10,
+	   HIF_REG_CONFIG_TXENABLE		= 0x08,
+	   HIF_REG_CONFIG_SLEEPMODE		= 0x04,
+	   HIF_REG_CONFIG_ALLMULTICAST		= 0x02,
+	   HIF_REG_CONFIG_PROMISCUOUS		= 0x01,
+	HIF_REG_ETHERNET_ADDR			= 0x0f,
+	HIF_REG_FRAME_DROP_COUNTER		= 0x15, /* 0..ff; reset: 0 */
+	HIF_REG_PAUSE_THRESHOLD			= 0x16,
+	   HIF_REG_PAUSE_THRESHOLD_DEFAULT	= 0,
+};
+
+/* Trailing status byte in Ethernet Rx frame */
+enum {
+	MCS7830_RX_SHORT_FRAME		= 0x01, /* < 64 bytes */
+	MCS7830_RX_LENGTH_ERROR		= 0x02, /* framelen != Ethernet length field */
+	MCS7830_RX_ALIGNMENT_ERROR	= 0x04, /* non-even number of nibbles */
+	MCS7830_RX_CRC_ERROR		= 0x08,
+	MCS7830_RX_LARGE_FRAME		= 0x10, /* > 1518 bytes */
+	MCS7830_RX_FRAME_CORRECT	= 0x20, /* frame is correct */
+	/* [7:6] reserved */
+};
+
+struct mcs7830_data {
+	u8 multi_filter[8];
+	u8 config;
+};
+
+static const char driver_name[] = "MOSCHIP usb-ethernet driver";
+
+static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+	return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
+				0x0000, index, data, size);
+}
+
+static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
+{
+	return usbnet_write_cmd(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
+				0x0000, index, data, size);
+}
+
+static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
+				0x0000, index, data, size);
+}
+
+static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
+{
+	int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int mcs7830_hif_set_mac_address(struct usbnet *dev, unsigned char *addr)
+{
+	int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
+
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
+{
+	int ret;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
+
+	if (ret < 0)
+		return ret;
+
+	/* it worked --> adopt it on netdev side */
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	return 0;
+}
+
+static int mcs7830_read_phy(struct usbnet *dev, u8 index)
+{
+	int ret;
+	int i;
+	__le16 val;
+
+	u8 cmd[2] = {
+		HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
+		HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
+	};
+
+	mutex_lock(&dev->phy_mutex);
+	/* write the MII command */
+	ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+	if (ret < 0)
+		goto out;
+
+	/* wait for the data to become valid, should be within < 1ms */
+	for (i = 0; i < 10; i++) {
+		ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+		if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
+			break;
+		ret = -EIO;
+		msleep(1);
+	}
+	if (ret < 0)
+		goto out;
+
+	/* read actual register contents */
+	ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
+	if (ret < 0)
+		goto out;
+	ret = le16_to_cpu(val);
+	dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
+		index, val, i);
+out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
+{
+	int ret;
+	int i;
+	__le16 le_val;
+
+	u8 cmd[2] = {
+		HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
+		HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
+	};
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* write the new register contents */
+	le_val = cpu_to_le16(val);
+	ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
+	if (ret < 0)
+		goto out;
+
+	/* write the MII command */
+	ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+	if (ret < 0)
+		goto out;
+
+	/* wait for the command to be accepted by the PHY */
+	for (i = 0; i < 10; i++) {
+		ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+		if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
+			break;
+		ret = -EIO;
+		msleep(1);
+	}
+	if (ret < 0)
+		goto out;
+
+	ret = 0;
+	dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
+		index, val, i);
+out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+/*
+ * This algorithm comes from the original mcs7830 version 1.4 driver,
+ * not sure if it is needed.
+ */
+static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
+{
+	int ret;
+	/* Enable all media types */
+	ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
+
+	/* First reset BMCR */
+	if (!ret)
+		ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
+	/* Enable Auto Neg */
+	if (!ret)
+		ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
+	/* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
+	if (!ret)
+		ret = mcs7830_write_phy(dev, MII_BMCR,
+				BMCR_ANENABLE | BMCR_ANRESTART	);
+	return ret;
+}
+
+
+/*
+ * if we can read register 22, the chip revision is C or higher
+ */
+static int mcs7830_get_rev(struct usbnet *dev)
+{
+	u8 dummy[2];
+	int ret;
+	ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
+	if (ret > 0)
+		return 2; /* Rev C or later */
+	return 1; /* earlier revision */
+}
+
+/*
+ * On rev. C we need to set the pause threshold
+ */
+static void mcs7830_rev_C_fixup(struct usbnet *dev)
+{
+	u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
+	int retry;
+
+	for (retry = 0; retry < 2; retry++) {
+		if (mcs7830_get_rev(dev) == 2) {
+			dev_info(&dev->udev->dev, "applying rev.C fixup\n");
+			mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
+					1, &pause_threshold);
+		}
+		msleep(1);
+	}
+}
+
+static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
+			     int location)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	return mcs7830_read_phy(dev, location);
+}
+
+static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
+				int location, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	mcs7830_write_phy(dev, location, val);
+}
+
+static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
+{
+	return (struct mcs7830_data *)&dev->data;
+}
+
+static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
+{
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+	mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
+				sizeof data->multi_filter,
+				data->multi_filter);
+}
+
+static void mcs7830_hif_update_config(struct usbnet *dev)
+{
+	/* implementation specific to data->config
+           (argument needs to be heap-based anyway - USB DMA!) */
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+	mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
+}
+
+static void mcs7830_data_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+
+	memset(data->multi_filter, 0, sizeof data->multi_filter);
+
+	data->config = HIF_REG_CONFIG_TXENABLE;
+
+	/* this should not be needed, but it doesn't work otherwise */
+	data->config |= HIF_REG_CONFIG_ALLMULTICAST;
+
+	if (net->flags & IFF_PROMISC) {
+		data->config |= HIF_REG_CONFIG_PROMISCUOUS;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > MCS7830_MAX_MCAST) {
+		data->config |= HIF_REG_CONFIG_ALLMULTICAST;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
+		}
+	}
+}
+
+static int mcs7830_apply_base_config(struct usbnet *dev)
+{
+	int ret;
+
+	/* re-configure known MAC (suspend case etc.) */
+	ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
+	if (ret) {
+		dev_info(&dev->udev->dev, "Cannot set MAC address\n");
+		goto out;
+	}
+
+	/* Set up PHY */
+	ret = mcs7830_set_autoneg(dev, 0);
+	if (ret) {
+		dev_info(&dev->udev->dev, "Cannot set autoneg\n");
+		goto out;
+	}
+
+	mcs7830_hif_update_multicast_hash(dev);
+	mcs7830_hif_update_config(dev);
+
+	mcs7830_rev_C_fixup(dev);
+	ret = 0;
+out:
+	return ret;
+}
+
+/* credits go to asix_set_multicast */
+static void mcs7830_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	mcs7830_data_set_multicast(net);
+
+	mcs7830_hif_update_multicast_hash(dev);
+	mcs7830_hif_update_config(dev);
+}
+
+static int mcs7830_get_regs_len(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	switch (mcs7830_get_rev(dev)) {
+	case 1:
+		return 21;
+	case 2:
+		return 32;
+	}
+	return 0;
+}
+
+static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
+{
+	usbnet_get_drvinfo(net, drvinfo);
+	drvinfo->regdump_len = mcs7830_get_regs_len(net);
+}
+
+static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	regs->version = mcs7830_get_rev(dev);
+	mcs7830_get_reg(dev, 0, regs->len, data);
+}
+
+static const struct ethtool_ops mcs7830_ethtool_ops = {
+	.get_drvinfo		= mcs7830_get_drvinfo,
+	.get_regs_len		= mcs7830_get_regs_len,
+	.get_regs		= mcs7830_get_regs,
+
+	/* common usbnet calls */
+	.get_link		= usbnet_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static const struct net_device_ops mcs7830_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl 		= mcs7830_ioctl,
+	.ndo_set_rx_mode	= mcs7830_set_multicast,
+	.ndo_set_mac_address	= mcs7830_set_mac_address,
+};
+
+static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
+{
+	struct net_device *net = dev->net;
+	int ret;
+	int retry;
+
+	/* Initial startup: Gather MAC address setting from EEPROM */
+	ret = -EINVAL;
+	for (retry = 0; retry < 5 && ret; retry++)
+		ret = mcs7830_hif_get_mac_address(dev, net->dev_addr);
+	if (ret) {
+		dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
+		goto out;
+	}
+
+	mcs7830_data_set_multicast(net);
+
+	ret = mcs7830_apply_base_config(dev);
+	if (ret)
+		goto out;
+
+	net->ethtool_ops = &mcs7830_ethtool_ops;
+	net->netdev_ops = &mcs7830_netdev_ops;
+
+	/* reserve space for the status byte on rx */
+	dev->rx_urb_size = ETH_FRAME_LEN + 1;
+
+	dev->mii.mdio_read = mcs7830_mdio_read;
+	dev->mii.mdio_write = mcs7830_mdio_write;
+	dev->mii.dev = net;
+	dev->mii.phy_id_mask = 0x3f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
+
+	ret = usbnet_get_endpoints(dev, udev);
+out:
+	return ret;
+}
+
+/* The chip always appends a status byte that we need to strip */
+static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	u8 status;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len) {
+		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	skb_trim(skb, skb->len - 1);
+	status = skb->data[skb->len];
+
+	if (status != MCS7830_RX_FRAME_CORRECT) {
+		dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
+
+		/* hmm, perhaps usbnet.c already sees a globally visible
+		   frame error and increments rx_errors on its own already? */
+		dev->net->stats.rx_errors++;
+
+		if (status &	(MCS7830_RX_SHORT_FRAME
+				|MCS7830_RX_LENGTH_ERROR
+				|MCS7830_RX_LARGE_FRAME))
+			dev->net->stats.rx_length_errors++;
+		if (status & MCS7830_RX_ALIGNMENT_ERROR)
+			dev->net->stats.rx_frame_errors++;
+		if (status & MCS7830_RX_CRC_ERROR)
+			dev->net->stats.rx_crc_errors++;
+	}
+
+	return skb->len > 0;
+}
+
+static void mcs7830_status(struct usbnet *dev, struct urb *urb)
+{
+	u8 *buf = urb->transfer_buffer;
+	bool link, link_changed;
+
+	if (urb->actual_length < 16)
+		return;
+
+	link = !(buf[1] == 0x20);
+	link_changed = netif_carrier_ok(dev->net) != link;
+	if (link_changed) {
+		usbnet_link_change(dev, link, 0);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static const struct driver_info moschip_info = {
+	.description	= "MOSCHIP 7830/7832/7730 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
+	.status		= mcs7830_status,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct driver_info sitecom_info = {
+	.description    = "Sitecom LN-30 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
+	.status		= mcs7830_status,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
+		.driver_info = (unsigned long) &sitecom_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static int mcs7830_reset_resume (struct usb_interface *intf)
+{
+ 	/* YES, this function is successful enough that ethtool -d
+           does show same output pre-/post-suspend */
+
+	struct usbnet		*dev = usb_get_intfdata(intf);
+
+	mcs7830_apply_base_config(dev);
+
+	usbnet_resume(intf);
+
+	return 0;
+}
+
+static struct usb_driver mcs7830_driver = {
+	.name = driver_name,
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.reset_resume = mcs7830_reset_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(mcs7830_driver);
+
+MODULE_DESCRIPTION("USB to network adapter MCS7830)");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/net1080.c backports-4.2.6-1/drivers/net/usb/net1080.c
--- backports-4.2.6-1.org/drivers/net/usb/net1080.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/net1080.c	2016-06-28 14:35:17.995307218 +0200
@@ -0,0 +1,544 @@
+/*
+ * Net1080 based USB host-to-host cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+
+#include <asm/unaligned.h>
+
+
+/*
+ * Netchip 1080 driver ... http://www.netchip.com
+ * (Sept 2004:  End-of-life announcement has been sent.)
+ * Used in (some) LapLink cables
+ */
+
+#define frame_errors	data[1]
+
+/*
+ * NetChip framing of ethernet packets, supporting additional error
+ * checks for links that may drop bulk packets from inside messages.
+ * Odd USB length == always short read for last usb packet.
+ *	- nc_header
+ *	- Ethernet header (14 bytes)
+ *	- payload
+ *	- (optional padding byte, if needed so length becomes odd)
+ *	- nc_trailer
+ *
+ * This framing is to be avoided for non-NetChip devices.
+ */
+
+struct nc_header {		// packed:
+	__le16	hdr_len;		// sizeof nc_header (LE, all)
+	__le16	packet_len;		// payload size (including ethhdr)
+	__le16	packet_id;		// detects dropped packets
+#define MIN_HEADER	6
+
+	// all else is optional, and must start with:
+	// __le16	vendorId;	// from usb-if
+	// __le16	productId;
+} __packed;
+
+#define	PAD_BYTE	((unsigned char)0xAC)
+
+struct nc_trailer {
+	__le16	packet_id;
+} __packed;
+
+// packets may use FLAG_FRAMING_NC and optional pad
+#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
+				+ sizeof (struct ethhdr) \
+				+ (mtu) \
+				+ 1 \
+				+ sizeof (struct nc_trailer))
+
+#define MIN_FRAMED	FRAMED_SIZE(0)
+
+/* packets _could_ be up to 64KB... */
+#define NC_MAX_PACKET	32767
+
+
+/*
+ * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
+ * before the hardware drops it.  If that's done, the driver will need to
+ * frame network packets to guard against the dropped USB packets.  The win32
+ * driver sets this for both sides of the link.
+ */
+#define	NC_READ_TTL_MS	((u8)255)	// ms
+
+/*
+ * We ignore most registers and EEPROM contents.
+ */
+#define	REG_USBCTL	((u8)0x04)
+#define REG_TTL		((u8)0x10)
+#define REG_STATUS	((u8)0x11)
+
+/*
+ * Vendor specific requests to read/write data
+ */
+#define	REQUEST_REGISTER	((u8)0x10)
+#define	REQUEST_EEPROM		((u8)0x11)
+
+static int
+nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
+{
+	int status = usbnet_read_cmd(dev, req,
+				     USB_DIR_IN | USB_TYPE_VENDOR |
+				     USB_RECIP_DEVICE,
+				     0, regnum, retval_ptr,
+				     sizeof *retval_ptr);
+	if (status > 0)
+		status = 0;
+	if (!status)
+		le16_to_cpus(retval_ptr);
+	return status;
+}
+
+static inline int
+nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
+{
+	return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
+}
+
+// no retval ... can become async, usable in_interrupt()
+static void
+nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
+{
+	usbnet_write_cmd(dev, req,
+			 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			 value, regnum, NULL, 0);
+}
+
+static inline void
+nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
+{
+	nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
+}
+
+
+#if 0
+static void nc_dump_registers(struct usbnet *dev)
+{
+	u8	reg;
+	u16	*vp = kmalloc(sizeof (u16));
+
+	if (!vp)
+		return;
+
+	netdev_dbg(dev->net, "registers:\n");
+	for (reg = 0; reg < 0x20; reg++) {
+		int retval;
+
+		// reading some registers is trouble
+		if (reg >= 0x08 && reg <= 0xf)
+			continue;
+		if (reg >= 0x12 && reg <= 0x1e)
+			continue;
+
+		retval = nc_register_read(dev, reg, vp);
+		if (retval < 0)
+			netdev_dbg(dev->net, "reg [0x%x] ==> error %d\n",
+				   reg, retval);
+		else
+			netdev_dbg(dev->net, "reg [0x%x] = 0x%x\n", reg, *vp);
+	}
+	kfree(vp);
+}
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Control register
+ */
+
+#define	USBCTL_WRITABLE_MASK	0x1f0f
+// bits 15-13 reserved, r/o
+#define	USBCTL_ENABLE_LANG	(1 << 12)
+#define	USBCTL_ENABLE_MFGR	(1 << 11)
+#define	USBCTL_ENABLE_PROD	(1 << 10)
+#define	USBCTL_ENABLE_SERIAL	(1 << 9)
+#define	USBCTL_ENABLE_DEFAULTS	(1 << 8)
+// bits 7-4 reserved, r/o
+#define	USBCTL_FLUSH_OTHER	(1 << 3)
+#define	USBCTL_FLUSH_THIS	(1 << 2)
+#define	USBCTL_DISCONN_OTHER	(1 << 1)
+#define	USBCTL_DISCONN_THIS	(1 << 0)
+
+static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
+{
+	netif_dbg(dev, link, dev->net,
+		  "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  usbctl,
+		  (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
+		  (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
+		  (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
+		  (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
+		  (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
+
+		  (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
+		  (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
+
+		  (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
+		  (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
+
+		  usbctl & ~USBCTL_WRITABLE_MASK);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Status register
+ */
+
+#define	STATUS_PORT_A		(1 << 15)
+
+#define	STATUS_CONN_OTHER	(1 << 14)
+#define	STATUS_SUSPEND_OTHER	(1 << 13)
+#define	STATUS_MAILBOX_OTHER	(1 << 12)
+#define	STATUS_PACKETS_OTHER(n)	(((n) >> 8) & 0x03)
+
+#define	STATUS_CONN_THIS	(1 << 6)
+#define	STATUS_SUSPEND_THIS	(1 << 5)
+#define	STATUS_MAILBOX_THIS	(1 << 4)
+#define	STATUS_PACKETS_THIS(n)	(((n) >> 0) & 0x03)
+
+#define	STATUS_UNSPEC_MASK	0x0c8c
+#define	STATUS_NOISE_MASK 	((u16)~(0x0303|STATUS_UNSPEC_MASK))
+
+
+static inline void nc_dump_status(struct usbnet *dev, u16 status)
+{
+	netif_dbg(dev, link, dev->net,
+		  "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  status,
+
+		  // XXX the packet counts don't seem right
+		  // (1 at reset, not 0); maybe UNSPEC too
+
+		  (status & STATUS_PORT_A) ? 'A' : 'B',
+		  STATUS_PACKETS_THIS(status),
+		  (status & STATUS_CONN_THIS) ? " CON" : "",
+		  (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
+		  (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
+
+		  STATUS_PACKETS_OTHER(status),
+		  (status & STATUS_CONN_OTHER) ? " CON" : "",
+		  (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
+		  (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
+
+		  status & STATUS_UNSPEC_MASK);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * TTL register
+ */
+
+#define	TTL_THIS(ttl)	(0x00ff & ttl)
+#define	TTL_OTHER(ttl)	(0x00ff & (ttl >> 8))
+#define MK_TTL(this,other)	((u16)(((other)<<8)|(0x00ff&(this))))
+
+static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
+{
+	netif_dbg(dev, link, dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int net1080_reset(struct usbnet *dev)
+{
+	u16		usbctl, status, ttl;
+	u16		vp;
+	int		retval;
+
+	// nc_dump_registers(dev);
+
+	if ((retval = nc_register_read(dev, REG_STATUS, &vp)) < 0) {
+		netdev_dbg(dev->net, "can't read %s-%s status: %d\n",
+			   dev->udev->bus->bus_name, dev->udev->devpath, retval);
+		goto done;
+	}
+	status = vp;
+	nc_dump_status(dev, status);
+
+	if ((retval = nc_register_read(dev, REG_USBCTL, &vp)) < 0) {
+		netdev_dbg(dev->net, "can't read USBCTL, %d\n", retval);
+		goto done;
+	}
+	usbctl = vp;
+	nc_dump_usbctl(dev, usbctl);
+
+	nc_register_write(dev, REG_USBCTL,
+			USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
+
+	if ((retval = nc_register_read(dev, REG_TTL, &vp)) < 0) {
+		netdev_dbg(dev->net, "can't read TTL, %d\n", retval);
+		goto done;
+	}
+	ttl = vp;
+	// nc_dump_ttl(dev, ttl);
+
+	nc_register_write(dev, REG_TTL,
+			MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
+	netdev_dbg(dev->net, "assigned TTL, %d ms\n", NC_READ_TTL_MS);
+
+	netif_info(dev, link, dev->net, "port %c, peer %sconnected\n",
+		   (status & STATUS_PORT_A) ? 'A' : 'B',
+		   (status & STATUS_CONN_OTHER) ? "" : "dis");
+	retval = 0;
+
+done:
+	return retval;
+}
+
+static int net1080_check_connect(struct usbnet *dev)
+{
+	int			retval;
+	u16			status;
+	u16			vp;
+
+	retval = nc_register_read(dev, REG_STATUS, &vp);
+	status = vp;
+	if (retval != 0) {
+		netdev_dbg(dev->net, "net1080_check_conn read - %d\n", retval);
+		return retval;
+	}
+	if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
+		return -ENOLINK;
+	return 0;
+}
+
+static void nc_ensure_sync(struct usbnet *dev)
+{
+	if (++dev->frame_errors <= 5)
+		return;
+
+	if (usbnet_write_cmd_async(dev, REQUEST_REGISTER,
+					USB_DIR_OUT | USB_TYPE_VENDOR |
+					USB_RECIP_DEVICE,
+					USBCTL_FLUSH_THIS |
+					USBCTL_FLUSH_OTHER,
+					REG_USBCTL, NULL, 0))
+		return;
+
+	netif_dbg(dev, rx_err, dev->net,
+		  "flush net1080; too many framing errors\n");
+	dev->frame_errors = 0;
+}
+
+static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct nc_header	*header;
+	struct nc_trailer	*trailer;
+	u16			hdr_len, packet_len;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	if (!(skb->len & 0x01)) {
+		netdev_dbg(dev->net, "rx framesize %d range %d..%d mtu %d\n",
+			   skb->len, dev->net->hard_header_len, dev->hard_mtu,
+			   dev->net->mtu);
+		dev->net->stats.rx_frame_errors++;
+		nc_ensure_sync(dev);
+		return 0;
+	}
+
+	header = (struct nc_header *) skb->data;
+	hdr_len = le16_to_cpup(&header->hdr_len);
+	packet_len = le16_to_cpup(&header->packet_len);
+	if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
+		dev->net->stats.rx_frame_errors++;
+		netdev_dbg(dev->net, "packet too big, %d\n", packet_len);
+		nc_ensure_sync(dev);
+		return 0;
+	} else if (hdr_len < MIN_HEADER) {
+		dev->net->stats.rx_frame_errors++;
+		netdev_dbg(dev->net, "header too short, %d\n", hdr_len);
+		nc_ensure_sync(dev);
+		return 0;
+	} else if (hdr_len > MIN_HEADER) {
+		// out of band data for us?
+		netdev_dbg(dev->net, "header OOB, %d bytes\n", hdr_len - MIN_HEADER);
+		nc_ensure_sync(dev);
+		// switch (vendor/product ids) { ... }
+	}
+	skb_pull(skb, hdr_len);
+
+	trailer = (struct nc_trailer *)
+		(skb->data + skb->len - sizeof *trailer);
+	skb_trim(skb, skb->len - sizeof *trailer);
+
+	if ((packet_len & 0x01) == 0) {
+		if (skb->data [packet_len] != PAD_BYTE) {
+			dev->net->stats.rx_frame_errors++;
+			netdev_dbg(dev->net, "bad pad\n");
+			return 0;
+		}
+		skb_trim(skb, skb->len - 1);
+	}
+	if (skb->len != packet_len) {
+		dev->net->stats.rx_frame_errors++;
+		netdev_dbg(dev->net, "bad packet len %d (expected %d)\n",
+			   skb->len, packet_len);
+		nc_ensure_sync(dev);
+		return 0;
+	}
+	if (header->packet_id != get_unaligned(&trailer->packet_id)) {
+		dev->net->stats.rx_fifo_errors++;
+		netdev_dbg(dev->net, "(2+ dropped) rx packet_id mismatch 0x%x 0x%x\n",
+			   le16_to_cpu(header->packet_id),
+			   le16_to_cpu(trailer->packet_id));
+		return 0;
+	}
+#if 0
+	netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len,
+		   header->packet_len, header->packet_id);
+#endif
+	dev->frame_errors = 0;
+	return 1;
+}
+
+static struct sk_buff *
+net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff		*skb2;
+	struct nc_header	*header = NULL;
+	struct nc_trailer	*trailer = NULL;
+	int			padlen = sizeof (struct nc_trailer);
+	int			len = skb->len;
+
+	if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
+		padlen++;
+	if (!skb_cloned(skb)) {
+		int	headroom = skb_headroom(skb);
+		int	tailroom = skb_tailroom(skb);
+
+		if (padlen <= tailroom &&
+		    sizeof(struct nc_header) <= headroom)
+			/* There's enough head and tail room */
+			goto encapsulate;
+
+		if ((sizeof (struct nc_header) + padlen) <
+				(headroom + tailroom)) {
+			/* There's enough total room, so just readjust */
+			skb->data = memmove(skb->head
+						+ sizeof (struct nc_header),
+					    skb->data, skb->len);
+			skb_set_tail_pointer(skb, len);
+			goto encapsulate;
+		}
+	}
+
+	/* Create a new skb to use with the correct size */
+	skb2 = skb_copy_expand(skb,
+				sizeof (struct nc_header),
+				padlen,
+				flags);
+	dev_kfree_skb_any(skb);
+	if (!skb2)
+		return skb2;
+	skb = skb2;
+
+encapsulate:
+	/* header first */
+	header = (struct nc_header *) skb_push(skb, sizeof *header);
+	header->hdr_len = cpu_to_le16(sizeof (*header));
+	header->packet_len = cpu_to_le16(len);
+	header->packet_id = cpu_to_le16((u16)dev->xid++);
+
+	/* maybe pad; then trailer */
+	if (!((skb->len + sizeof *trailer) & 0x01))
+		*skb_put(skb, 1) = PAD_BYTE;
+	trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
+	put_unaligned(header->packet_id, &trailer->packet_id);
+#if 0
+	netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n",
+		   header->hdr_len, header->packet_len,
+		   header->packet_id);
+#endif
+	return skb;
+}
+
+static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	unsigned	extra = sizeof (struct nc_header)
+				+ 1
+				+ sizeof (struct nc_trailer);
+
+	dev->net->hard_header_len += extra;
+	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+	dev->hard_mtu = NC_MAX_PACKET;
+	return usbnet_get_endpoints (dev, intf);
+}
+
+static const struct driver_info	net1080_info = {
+	.description =	"NetChip TurboCONNECT",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_NC,
+	.bind =		net1080_bind,
+	.reset =	net1080_reset,
+	.check_connect = net1080_check_connect,
+	.rx_fixup =	net1080_rx_fixup,
+	.tx_fixup =	net1080_tx_fixup,
+};
+
+static const struct usb_device_id	products [] = {
+{
+	USB_DEVICE(0x0525, 0x1080),	// NetChip ref design
+	.driver_info =	(unsigned long) &net1080_info,
+}, {
+	USB_DEVICE(0x06D0, 0x0622),	// Laplink Gold
+	.driver_info =	(unsigned long) &net1080_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver net1080_driver = {
+	.name =		"net1080",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(net1080_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/pegasus.c backports-4.2.6-1/drivers/net/usb/pegasus.c
--- backports-4.2.6-1.org/drivers/net/usb/pegasus.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/pegasus.c	2016-06-28 14:35:17.995307218 +0200
@@ -0,0 +1,1335 @@
+/*
+ *  Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *	ChangeLog:
+ *		....	Most of the time spent on reading sources & docs.
+ *		v0.2.x	First official release for the Linux kernel.
+ *		v0.3.0	Beutified and structured, some bugs fixed.
+ *		v0.3.x	URBifying bulk requests and bugfixing. First relatively
+ *			stable release. Still can touch device's registers only
+ *			from top-halves.
+ *		v0.4.0	Control messages remained unurbified are now URBs.
+ *			Now we can touch the HW at any time.
+ *		v0.4.9	Control urbs again use process context to wait. Argh...
+ *			Some long standing bugs (enable_net_traffic) fixed.
+ *			Also nasty trick about resubmiting control urb from
+ *			interrupt context used. Please let me know how it
+ *			behaves. Pegasus II support added since this version.
+ *			TODO: suppressing HCD warnings spewage on disconnect.
+ *		v0.4.13	Ethernet address is now set at probe(), not at open()
+ *			time as this seems to break dhcpd.
+ *		v0.5.0	branch to 2.5.x kernels
+ *		v0.5.1	ethtool support added
+ *		v0.5.5	rx socket buffers are in a pool and the their allocation
+ *			is out of the interrupt routine.
+ *		...
+ *		v0.9.3	simplified [get|set]_register(s), async update registers
+ *			logic revisited, receive skb_pool removed.
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include "pegasus.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.9.3 (2013/04/25)"
+#define DRIVER_AUTHOR "Petko Manolov <petkan@nucleusys.com>"
+#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
+
+static const char driver_name[] = "pegasus";
+
+#undef	PEGASUS_WRITE_EEPROM
+#define	BMSR_MEDIA	(BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
+			BMSR_100FULL | BMSR_ANEGCAPABLE)
+
+static bool loopback;
+static bool mii_mode;
+static char *devid;
+
+static struct usb_eth_dev usb_dev_id[] = {
+#define	PEGASUS_DEV(pn, vid, pid, flags)	\
+	{.name = pn, .vendor = vid, .device = pid, .private = flags},
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	PEGASUS_DEV(pn, vid, pid, flags)
+#include "pegasus.h"
+#undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
+	{NULL, 0, 0, 0},
+	{NULL, 0, 0, 0}
+};
+
+static struct usb_device_id pegasus_ids[] = {
+#define	PEGASUS_DEV(pn, vid, pid, flags) \
+	{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
+/*
+ * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
+ * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
+ * ignore adaptors belonging to the "Wireless" class 0xE0. For this one
+ * case anyway, seeing as the pegasus is for "Wired" adaptors.
+ */
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	{.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \
+	.idVendor = vid, .idProduct = pid, .bDeviceClass = dclass},
+#include "pegasus.h"
+#undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
+	{},
+	{}
+};
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+module_param(loopback, bool, 0);
+module_param(mii_mode, bool, 0);
+module_param(devid, charp, 0);
+MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)");
+MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0");
+MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'");
+
+/* use ethtool to change the level for any given device */
+static int msg_level = -1;
+module_param(msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Override default message level");
+
+MODULE_DEVICE_TABLE(usb, pegasus_ids);
+static const struct net_device_ops pegasus_netdev_ops;
+
+/*****/
+
+static void async_ctrl_callback(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
+{
+	int ret;
+
+	ret = usb_control_msg(pegasus->usb, usb_rcvctrlpipe(pegasus->usb, 0),
+			      PEGASUS_REQ_GET_REGS, PEGASUS_REQT_READ, 0,
+			      indx, data, size, 1000);
+	if (ret < 0)
+		netif_dbg(pegasus, drv, pegasus->net,
+			  "%s returned %d\n", __func__, ret);
+	return ret;
+}
+
+static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
+{
+	int ret;
+
+	ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0),
+			      PEGASUS_REQ_SET_REGS, PEGASUS_REQT_WRITE, 0,
+			      indx, data, size, 100);
+	if (ret < 0)
+		netif_dbg(pegasus, drv, pegasus->net,
+			  "%s returned %d\n", __func__, ret);
+	return ret;
+}
+
+static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data)
+{
+	int ret;
+
+	ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0),
+			      PEGASUS_REQ_SET_REG, PEGASUS_REQT_WRITE, data,
+			      indx, &data, 1, 1000);
+	if (ret < 0)
+		netif_dbg(pegasus, drv, pegasus->net,
+			  "%s returned %d\n", __func__, ret);
+	return ret;
+}
+
+static int update_eth_regs_async(pegasus_t *pegasus)
+{
+	int ret = -ENOMEM;
+	struct urb *async_urb;
+	struct usb_ctrlrequest *req;
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (req == NULL)
+		return ret;
+
+	async_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (async_urb == NULL) {
+		kfree(req);
+		return ret;
+	}
+	req->bRequestType = PEGASUS_REQT_WRITE;
+	req->bRequest = PEGASUS_REQ_SET_REGS;
+	req->wValue = cpu_to_le16(0);
+	req->wIndex = cpu_to_le16(EthCtrl0);
+	req->wLength = cpu_to_le16(3);
+
+	usb_fill_control_urb(async_urb, pegasus->usb,
+			     usb_sndctrlpipe(pegasus->usb, 0), (void *)req,
+			     pegasus->eth_regs, 3, async_ctrl_callback, req);
+
+	ret = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (ret) {
+		if (ret == -ENODEV)
+			netif_device_detach(pegasus->net);
+		netif_err(pegasus, drv, pegasus->net,
+			  "%s returned %d\n", __func__, ret);
+	}
+	return ret;
+}
+
+static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd)
+{
+	int i;
+	__u8 data[4] = { phy, 0, 0, indx };
+	__le16 regdi;
+	int ret = -ETIMEDOUT;
+
+	if (cmd & PHY_WRITE) {
+		__le16 *t = (__le16 *) & data[1];
+		*t = cpu_to_le16(*regd);
+	}
+	set_register(p, PhyCtrl, 0);
+	set_registers(p, PhyAddr, sizeof(data), data);
+	set_register(p, PhyCtrl, (indx | cmd));
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(p, PhyCtrl, 1, data);
+		if (ret < 0)
+			goto fail;
+		if (data[0] & PHY_DONE)
+			break;
+	}
+	if (i >= REG_TIMEOUT)
+		goto fail;
+	if (cmd & PHY_READ) {
+		ret = get_registers(p, PhyData, 2, &regdi);
+		*regd = le16_to_cpu(regdi);
+		return ret;
+	}
+	return 0;
+fail:
+	netif_dbg(p, drv, p->net, "%s failed\n", __func__);
+	return ret;
+}
+
+/* Returns non-negative int on success, error on failure */
+static int read_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
+{
+	return __mii_op(pegasus, phy, indx, regd, PHY_READ);
+}
+
+/* Returns zero on success, error on failure */
+static int write_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
+{
+	return __mii_op(pegasus, phy, indx, regd, PHY_WRITE);
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int loc)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	u16 res;
+
+	read_mii_word(pegasus, phy_id, loc, &res);
+	return (int)res;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	u16 data = val;
+
+	write_mii_word(pegasus, phy_id, loc, &data);
+}
+
+static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
+{
+	int i;
+	__u8 tmp;
+	__le16 retdatai;
+	int ret;
+
+	set_register(pegasus, EpromCtrl, 0);
+	set_register(pegasus, EpromOffset, index);
+	set_register(pegasus, EpromCtrl, EPROM_READ);
+
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (tmp & EPROM_DONE)
+			break;
+		if (ret == -ESHUTDOWN)
+			goto fail;
+	}
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	ret = get_registers(pegasus, EpromData, 2, &retdatai);
+	*retdata = le16_to_cpu(retdatai);
+	return ret;
+
+fail:
+	netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+	return -ETIMEDOUT;
+}
+
+#ifdef	PEGASUS_WRITE_EEPROM
+static inline void enable_eprom_write(pegasus_t *pegasus)
+{
+	__u8 tmp;
+
+	get_registers(pegasus, EthCtrl2, 1, &tmp);
+	set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE);
+}
+
+static inline void disable_eprom_write(pegasus_t *pegasus)
+{
+	__u8 tmp;
+
+	get_registers(pegasus, EthCtrl2, 1, &tmp);
+	set_register(pegasus, EpromCtrl, 0);
+	set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE);
+}
+
+static int write_eprom_word(pegasus_t *pegasus, __u8 index, __u16 data)
+{
+	int i;
+	__u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
+	int ret;
+	__le16 le_data = cpu_to_le16(data);
+
+	set_registers(pegasus, EpromOffset, 4, d);
+	enable_eprom_write(pegasus);
+	set_register(pegasus, EpromOffset, index);
+	set_registers(pegasus, EpromData, 2, &le_data);
+	set_register(pegasus, EpromCtrl, EPROM_WRITE);
+
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret == -ESHUTDOWN)
+			goto fail;
+		if (tmp & EPROM_DONE)
+			break;
+	}
+	disable_eprom_write(pegasus);
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	return ret;
+
+fail:
+	netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+	return -ETIMEDOUT;
+}
+#endif				/* PEGASUS_WRITE_EEPROM */
+
+static inline void get_node_id(pegasus_t *pegasus, __u8 *id)
+{
+	int i;
+	__u16 w16;
+
+	for (i = 0; i < 3; i++) {
+		read_eprom_word(pegasus, i, &w16);
+		((__le16 *) id)[i] = cpu_to_le16(w16);
+	}
+}
+
+static void set_ethernet_addr(pegasus_t *pegasus)
+{
+	__u8 node_id[6];
+
+	if (pegasus->features & PEGASUS_II) {
+		get_registers(pegasus, 0x10, sizeof(node_id), node_id);
+	} else {
+		get_node_id(pegasus, node_id);
+		set_registers(pegasus, EthID, sizeof(node_id), node_id);
+	}
+	memcpy(pegasus->net->dev_addr, node_id, sizeof(node_id));
+}
+
+static inline int reset_mac(pegasus_t *pegasus)
+{
+	__u8 data = 0x8;
+	int i;
+
+	set_register(pegasus, EthCtrl1, data);
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		get_registers(pegasus, EthCtrl1, 1, &data);
+		if (~data & 0x08) {
+			if (loopback)
+				break;
+			if (mii_mode && (pegasus->features & HAS_HOME_PNA))
+				set_register(pegasus, Gpio1, 0x34);
+			else
+				set_register(pegasus, Gpio1, 0x26);
+			set_register(pegasus, Gpio0, pegasus->features);
+			set_register(pegasus, Gpio0, DEFAULT_GPIO_SET);
+			break;
+		}
+	}
+	if (i == REG_TIMEOUT)
+		return -ETIMEDOUT;
+
+	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
+		set_register(pegasus, Gpio0, 0x24);
+		set_register(pegasus, Gpio0, 0x26);
+	}
+	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
+		__u16 auxmode;
+		read_mii_word(pegasus, 3, 0x1b, &auxmode);
+		auxmode |= 4;
+		write_mii_word(pegasus, 3, 0x1b, &auxmode);
+	}
+
+	return 0;
+}
+
+static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
+{
+	__u16 linkpart;
+	__u8 data[4];
+	pegasus_t *pegasus = netdev_priv(dev);
+	int ret;
+
+	read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
+	data[0] = 0xc9;
+	data[1] = 0;
+	if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
+		data[1] |= 0x20;	/* set full duplex */
+	if (linkpart & (ADVERTISE_100FULL | ADVERTISE_100HALF))
+		data[1] |= 0x10;	/* set 100 Mbps */
+	if (mii_mode)
+		data[1] = 0;
+	data[2] = loopback ? 0x09 : 0x01;
+
+	memcpy(pegasus->eth_regs, data, sizeof(data));
+	ret = set_registers(pegasus, EthCtrl0, 3, data);
+
+	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
+	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
+		u16 auxmode;
+		read_mii_word(pegasus, 0, 0x1b, &auxmode);
+		auxmode |= 4;
+		write_mii_word(pegasus, 0, 0x1b, &auxmode);
+	}
+
+	return ret;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	pegasus_t *pegasus = urb->context;
+	struct net_device *net;
+	int rx_status, count = urb->actual_length;
+	int status = urb->status;
+	u8 *buf = urb->transfer_buffer;
+	__u16 pkt_len;
+
+	if (!pegasus)
+		return;
+
+	net = pegasus->net;
+	if (!netif_device_present(net) || !netif_running(net))
+		return;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ETIME:
+		netif_dbg(pegasus, rx_err, net, "reset MAC\n");
+		pegasus->flags &= ~PEGASUS_RX_BUSY;
+		break;
+	case -EPIPE:		/* stall, or disconnect from TT */
+		/* FIXME schedule work to clear the halt */
+		netif_warn(pegasus, rx_err, net, "no rx stall recovery\n");
+		return;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		netif_dbg(pegasus, ifdown, net, "rx unlink, %d\n", status);
+		return;
+	default:
+		netif_dbg(pegasus, rx_err, net, "RX status %d\n", status);
+		goto goon;
+	}
+
+	if (!count || count < 4)
+		goto goon;
+
+	rx_status = buf[count - 2];
+	if (rx_status & 0x1e) {
+		netif_dbg(pegasus, rx_err, net,
+			  "RX packet error %x\n", rx_status);
+		pegasus->stats.rx_errors++;
+		if (rx_status & 0x06)	/* long or runt	*/
+			pegasus->stats.rx_length_errors++;
+		if (rx_status & 0x08)
+			pegasus->stats.rx_crc_errors++;
+		if (rx_status & 0x10)	/* extra bits	*/
+			pegasus->stats.rx_frame_errors++;
+		goto goon;
+	}
+	if (pegasus->chip == 0x8513) {
+		pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer);
+		pkt_len &= 0x0fff;
+		pegasus->rx_skb->data += 2;
+	} else {
+		pkt_len = buf[count - 3] << 8;
+		pkt_len += buf[count - 4];
+		pkt_len &= 0xfff;
+		pkt_len -= 8;
+	}
+
+	/*
+	 * If the packet is unreasonably long, quietly drop it rather than
+	 * kernel panicing by calling skb_put.
+	 */
+	if (pkt_len > PEGASUS_MTU)
+		goto goon;
+
+	/*
+	 * at this point we are sure pegasus->rx_skb != NULL
+	 * so we go ahead and pass up the packet.
+	 */
+	skb_put(pegasus->rx_skb, pkt_len);
+	pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net);
+	netif_rx(pegasus->rx_skb);
+	pegasus->stats.rx_packets++;
+	pegasus->stats.rx_bytes += pkt_len;
+
+	if (pegasus->flags & PEGASUS_UNPLUG)
+		return;
+
+	pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net, PEGASUS_MTU,
+						      GFP_ATOMIC);
+
+	if (pegasus->rx_skb == NULL)
+		goto tl_sched;
+goon:
+	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+			  usb_rcvbulkpipe(pegasus->usb, 1),
+			  pegasus->rx_skb->data, PEGASUS_MTU + 8,
+			  read_bulk_callback, pegasus);
+	rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
+	if (rx_status == -ENODEV)
+		netif_device_detach(pegasus->net);
+	else if (rx_status) {
+		pegasus->flags |= PEGASUS_RX_URB_FAIL;
+		goto tl_sched;
+	} else {
+		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
+	}
+
+	return;
+
+tl_sched:
+	tasklet_schedule(&pegasus->rx_tl);
+}
+
+static void rx_fixup(unsigned long data)
+{
+	pegasus_t *pegasus;
+	int status;
+
+	pegasus = (pegasus_t *) data;
+	if (pegasus->flags & PEGASUS_UNPLUG)
+		return;
+
+	if (pegasus->flags & PEGASUS_RX_URB_FAIL)
+		if (pegasus->rx_skb)
+			goto try_again;
+	if (pegasus->rx_skb == NULL)
+		pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net,
+							      PEGASUS_MTU,
+							      GFP_ATOMIC);
+	if (pegasus->rx_skb == NULL) {
+		netif_warn(pegasus, rx_err, pegasus->net, "low on memory\n");
+		tasklet_schedule(&pegasus->rx_tl);
+		return;
+	}
+	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+			  usb_rcvbulkpipe(pegasus->usb, 1),
+			  pegasus->rx_skb->data, PEGASUS_MTU + 8,
+			  read_bulk_callback, pegasus);
+try_again:
+	status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV)
+		netif_device_detach(pegasus->net);
+	else if (status) {
+		pegasus->flags |= PEGASUS_RX_URB_FAIL;
+		tasklet_schedule(&pegasus->rx_tl);
+	} else {
+		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
+	}
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	pegasus_t *pegasus = urb->context;
+	struct net_device *net;
+	int status = urb->status;
+
+	if (!pegasus)
+		return;
+
+	net = pegasus->net;
+
+	if (!netif_device_present(net) || !netif_running(net))
+		return;
+
+	switch (status) {
+	case -EPIPE:
+		/* FIXME schedule_work() to clear the tx halt */
+		netif_stop_queue(net);
+		netif_warn(pegasus, tx_err, net, "no tx stall recovery\n");
+		return;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		netif_dbg(pegasus, ifdown, net, "tx unlink, %d\n", status);
+		return;
+	default:
+		netif_info(pegasus, tx_err, net, "TX status %d\n", status);
+		/* FALL THROUGH */
+	case 0:
+		break;
+	}
+
+	net->trans_start = jiffies; /* prevent tx timeout */
+	netif_wake_queue(net);
+}
+
+static void intr_callback(struct urb *urb)
+{
+	pegasus_t *pegasus = urb->context;
+	struct net_device *net;
+	int res, status = urb->status;
+
+	if (!pegasus)
+		return;
+	net = pegasus->net;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	default:
+		/* some Pegasus-I products report LOTS of data
+		 * toggle errors... avoid log spamming
+		 */
+		netif_dbg(pegasus, timer, net, "intr status %d\n", status);
+	}
+
+	if (urb->actual_length >= 6) {
+		u8 *d = urb->transfer_buffer;
+
+		/* byte 0 == tx_status1, reg 2B */
+		if (d[0] & (TX_UNDERRUN|EXCESSIVE_COL
+					|LATE_COL|JABBER_TIMEOUT)) {
+			pegasus->stats.tx_errors++;
+			if (d[0] & TX_UNDERRUN)
+				pegasus->stats.tx_fifo_errors++;
+			if (d[0] & (EXCESSIVE_COL | JABBER_TIMEOUT))
+				pegasus->stats.tx_aborted_errors++;
+			if (d[0] & LATE_COL)
+				pegasus->stats.tx_window_errors++;
+		}
+
+		/* d[5].LINK_STATUS lies on some adapters.
+		 * d[0].NO_CARRIER kicks in only with failed TX.
+		 * ... so monitoring with MII may be safest.
+		 */
+
+		/* bytes 3-4 == rx_lostpkt, reg 2E/2F */
+		pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
+	}
+
+	res = usb_submit_urb(urb, GFP_ATOMIC);
+	if (res == -ENODEV)
+		netif_device_detach(pegasus->net);
+	if (res)
+		netif_err(pegasus, timer, net,
+			  "can't resubmit interrupt urb, %d\n", res);
+}
+
+static void pegasus_tx_timeout(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	netif_warn(pegasus, timer, net, "tx timeout\n");
+	usb_unlink_urb(pegasus->tx_urb);
+	pegasus->stats.tx_errors++;
+}
+
+static netdev_tx_t pegasus_start_xmit(struct sk_buff *skb,
+					    struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
+	int res;
+	__u16 l16 = skb->len;
+
+	netif_stop_queue(net);
+
+	((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
+	skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
+	usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
+			  usb_sndbulkpipe(pegasus->usb, 2),
+			  pegasus->tx_buff, count,
+			  write_bulk_callback, pegasus);
+	if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
+		netif_warn(pegasus, tx_err, net, "fail tx, %d\n", res);
+		switch (res) {
+		case -EPIPE:		/* stall, or disconnect from TT */
+			/* cleanup should already have been scheduled */
+			break;
+		case -ENODEV:		/* disconnect() upcoming */
+		case -EPERM:
+			netif_device_detach(pegasus->net);
+			break;
+		default:
+			pegasus->stats.tx_errors++;
+			netif_start_queue(net);
+		}
+	} else {
+		pegasus->stats.tx_packets++;
+		pegasus->stats.tx_bytes += skb->len;
+	}
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
+{
+	return &((pegasus_t *) netdev_priv(dev))->stats;
+}
+
+static inline void disable_net_traffic(pegasus_t *pegasus)
+{
+	__le16 tmp = cpu_to_le16(0);
+
+	set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
+}
+
+static inline void get_interrupt_interval(pegasus_t *pegasus)
+{
+	u16 data;
+	u8 interval;
+
+	read_eprom_word(pegasus, 4, &data);
+	interval = data >> 8;
+	if (pegasus->usb->speed != USB_SPEED_HIGH) {
+		if (interval < 0x80) {
+			netif_info(pegasus, timer, pegasus->net,
+				   "intr interval changed from %ums to %ums\n",
+				   interval, 0x80);
+			interval = 0x80;
+			data = (data & 0x00FF) | ((u16)interval << 8);
+#ifdef PEGASUS_WRITE_EEPROM
+			write_eprom_word(pegasus, 4, data);
+#endif
+		}
+	}
+	pegasus->intr_interval = interval;
+}
+
+static void set_carrier(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	u16 tmp;
+
+	if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+		return;
+
+	if (tmp & BMSR_LSTATUS)
+		netif_carrier_on(net);
+	else
+		netif_carrier_off(net);
+}
+
+static void free_all_urbs(pegasus_t *pegasus)
+{
+	usb_free_urb(pegasus->intr_urb);
+	usb_free_urb(pegasus->tx_urb);
+	usb_free_urb(pegasus->rx_urb);
+}
+
+static void unlink_all_urbs(pegasus_t *pegasus)
+{
+	usb_kill_urb(pegasus->intr_urb);
+	usb_kill_urb(pegasus->tx_urb);
+	usb_kill_urb(pegasus->rx_urb);
+}
+
+static int alloc_urbs(pegasus_t *pegasus)
+{
+	int res = -ENOMEM;
+
+	pegasus->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->rx_urb) {
+		return res;
+	}
+	pegasus->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->tx_urb) {
+		usb_free_urb(pegasus->rx_urb);
+		return res;
+	}
+	pegasus->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->intr_urb) {
+		usb_free_urb(pegasus->tx_urb);
+		usb_free_urb(pegasus->rx_urb);
+		return res;
+	}
+
+	return 0;
+}
+
+static int pegasus_open(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	int res=-ENOMEM;
+
+	if (pegasus->rx_skb == NULL)
+		pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net,
+							      PEGASUS_MTU,
+							      GFP_KERNEL);
+	if (!pegasus->rx_skb)
+		goto exit;
+
+	res = set_registers(pegasus, EthID, 6, net->dev_addr);
+
+	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+			  usb_rcvbulkpipe(pegasus->usb, 1),
+			  pegasus->rx_skb->data, PEGASUS_MTU + 8,
+			  read_bulk_callback, pegasus);
+	if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(pegasus->net);
+		netif_dbg(pegasus, ifup, net, "failed rx_urb, %d\n", res);
+		goto exit;
+	}
+
+	usb_fill_int_urb(pegasus->intr_urb, pegasus->usb,
+			 usb_rcvintpipe(pegasus->usb, 3),
+			 pegasus->intr_buff, sizeof(pegasus->intr_buff),
+			 intr_callback, pegasus, pegasus->intr_interval);
+	if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(pegasus->net);
+		netif_dbg(pegasus, ifup, net, "failed intr_urb, %d\n", res);
+		usb_kill_urb(pegasus->rx_urb);
+		goto exit;
+	}
+	res = enable_net_traffic(net, pegasus->usb);
+	if (res < 0) {
+		netif_dbg(pegasus, ifup, net,
+			  "can't enable_net_traffic() - %d\n", res);
+		res = -EIO;
+		usb_kill_urb(pegasus->rx_urb);
+		usb_kill_urb(pegasus->intr_urb);
+		goto exit;
+	}
+	set_carrier(net);
+	netif_start_queue(net);
+	netif_dbg(pegasus, ifup, net, "open\n");
+	res = 0;
+exit:
+	return res;
+}
+
+static int pegasus_close(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+
+	netif_stop_queue(net);
+	if (!(pegasus->flags & PEGASUS_UNPLUG))
+		disable_net_traffic(pegasus);
+	tasklet_kill(&pegasus->rx_tl);
+	unlink_all_urbs(pegasus);
+
+	return 0;
+}
+
+static void pegasus_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+
+	strlcpy(info->driver, driver_name, sizeof(info->driver));
+	strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	usb_make_path(pegasus->usb, info->bus_info, sizeof(info->bus_info));
+}
+
+/* also handles three patterns of some kind in hardware */
+#define	WOL_SUPPORTED	(WAKE_MAGIC|WAKE_PHY)
+
+static void
+pegasus_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	pegasus_t	*pegasus = netdev_priv(dev);
+
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
+	wol->wolopts = pegasus->wolopts;
+}
+
+static int
+pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	pegasus_t	*pegasus = netdev_priv(dev);
+	u8		reg78 = 0x04;
+	int		ret;
+
+	if (wol->wolopts & ~WOL_SUPPORTED)
+		return -EINVAL;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		reg78 |= 0x80;
+	if (wol->wolopts & WAKE_PHY)
+		reg78 |= 0x40;
+	/* FIXME this 0x10 bit still needs to get set in the chip... */
+	if (wol->wolopts)
+		pegasus->eth_regs[0] |= 0x10;
+	else
+		pegasus->eth_regs[0] &= ~0x10;
+	pegasus->wolopts = wol->wolopts;
+
+	ret = set_register(pegasus, WakeupControl, reg78);
+	if (!ret)
+		ret = device_set_wakeup_enable(&pegasus->usb->dev,
+						wol->wolopts);
+	return ret;
+}
+
+static inline void pegasus_reset_wol(struct net_device *dev)
+{
+	struct ethtool_wolinfo wol;
+
+	memset(&wol, 0, sizeof wol);
+	(void) pegasus_set_wol(dev, &wol);
+}
+
+static int
+pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	pegasus_t *pegasus;
+
+	pegasus = netdev_priv(dev);
+	mii_ethtool_gset(&pegasus->mii, ecmd);
+	return 0;
+}
+
+static int
+pegasus_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return mii_ethtool_sset(&pegasus->mii, ecmd);
+}
+
+static int pegasus_nway_reset(struct net_device *dev)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return mii_nway_restart(&pegasus->mii);
+}
+
+static u32 pegasus_get_link(struct net_device *dev)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return mii_link_ok(&pegasus->mii);
+}
+
+static u32 pegasus_get_msglevel(struct net_device *dev)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return pegasus->msg_enable;
+}
+
+static void pegasus_set_msglevel(struct net_device *dev, u32 v)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	pegasus->msg_enable = v;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = pegasus_get_drvinfo,
+	.get_settings = pegasus_get_settings,
+	.set_settings = pegasus_set_settings,
+	.nway_reset = pegasus_nway_reset,
+	.get_link = pegasus_get_link,
+	.get_msglevel = pegasus_get_msglevel,
+	.set_msglevel = pegasus_set_msglevel,
+	.get_wol = pegasus_get_wol,
+	.set_wol = pegasus_set_wol,
+};
+
+static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	__u16 *data = (__u16 *) &rq->ifr_ifru;
+	pegasus_t *pegasus = netdev_priv(net);
+	int res;
+
+	switch (cmd) {
+	case SIOCDEVPRIVATE:
+		data[0] = pegasus->phy;
+	case SIOCDEVPRIVATE + 1:
+		read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
+		res = 0;
+		break;
+	case SIOCDEVPRIVATE + 2:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		write_mii_word(pegasus, pegasus->phy, data[1] & 0x1f, &data[2]);
+		res = 0;
+		break;
+	default:
+		res = -EOPNOTSUPP;
+	}
+	return res;
+}
+
+static void pegasus_set_multicast(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+
+	if (net->flags & IFF_PROMISC) {
+		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
+		netif_info(pegasus, link, net, "Promiscuous mode enabled\n");
+	} else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
+		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
+		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
+		netif_dbg(pegasus, link, net, "set allmulti\n");
+	} else {
+		pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
+		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
+	}
+	update_eth_regs_async(pegasus);
+}
+
+static __u8 mii_phy_probe(pegasus_t *pegasus)
+{
+	int i;
+	__u16 tmp;
+
+	for (i = 0; i < 32; i++) {
+		read_mii_word(pegasus, i, MII_BMSR, &tmp);
+		if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
+			continue;
+		else
+			return i;
+	}
+
+	return 0xff;
+}
+
+static inline void setup_pegasus_II(pegasus_t *pegasus)
+{
+	__u8 data = 0xa5;
+
+	set_register(pegasus, Reg1d, 0);
+	set_register(pegasus, Reg7b, 1);
+	mdelay(100);
+	if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
+		set_register(pegasus, Reg7b, 0);
+	else
+		set_register(pegasus, Reg7b, 2);
+
+	set_register(pegasus, 0x83, data);
+	get_registers(pegasus, 0x83, 1, &data);
+
+	if (data == 0xa5)
+		pegasus->chip = 0x8513;
+	else
+		pegasus->chip = 0;
+
+	set_register(pegasus, 0x80, 0xc0);
+	set_register(pegasus, 0x83, 0xff);
+	set_register(pegasus, 0x84, 0x01);
+
+	if (pegasus->features & HAS_HOME_PNA && mii_mode)
+		set_register(pegasus, Reg81, 6);
+	else
+		set_register(pegasus, Reg81, 2);
+}
+
+
+static int pegasus_count;
+static struct workqueue_struct *pegasus_workqueue;
+#define CARRIER_CHECK_DELAY (2 * HZ)
+
+static void check_carrier(struct work_struct *work)
+{
+	pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
+	set_carrier(pegasus->net);
+	if (!(pegasus->flags & PEGASUS_UNPLUG)) {
+		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+			CARRIER_CHECK_DELAY);
+	}
+}
+
+static int pegasus_blacklisted(struct usb_device *udev)
+{
+	struct usb_device_descriptor *udd = &udev->descriptor;
+
+	/* Special quirk to keep the driver from handling the Belkin Bluetooth
+	 * dongle which happens to have the same ID.
+	 */
+	if ((udd->idVendor == cpu_to_le16(VENDOR_BELKIN)) &&
+	    (udd->idProduct == cpu_to_le16(0x0121)) &&
+	    (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
+	    (udd->bDeviceProtocol == 1))
+		return 1;
+
+	return 0;
+}
+
+/* we rely on probe() and remove() being serialized so we
+ * don't need extra locking on pegasus_count.
+ */
+static void pegasus_dec_workqueue(void)
+{
+	pegasus_count--;
+	if (pegasus_count == 0) {
+		destroy_workqueue(pegasus_workqueue);
+		pegasus_workqueue = NULL;
+	}
+}
+
+static int pegasus_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct net_device *net;
+	pegasus_t *pegasus;
+	int dev_index = id - pegasus_ids;
+	int res = -ENOMEM;
+
+	if (pegasus_blacklisted(dev))
+		return -ENODEV;
+
+	if (pegasus_count == 0) {
+		pegasus_workqueue = create_singlethread_workqueue("pegasus");
+		if (!pegasus_workqueue)
+			return -ENOMEM;
+	}
+	pegasus_count++;
+
+	net = alloc_etherdev(sizeof(struct pegasus));
+	if (!net)
+		goto out;
+
+	pegasus = netdev_priv(net);
+	pegasus->dev_index = dev_index;
+
+	res = alloc_urbs(pegasus);
+	if (res < 0) {
+		dev_err(&intf->dev, "can't allocate %s\n", "urbs");
+		goto out1;
+	}
+
+	tasklet_init(&pegasus->rx_tl, rx_fixup, (unsigned long) pegasus);
+
+	INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
+
+	pegasus->intf = intf;
+	pegasus->usb = dev;
+	pegasus->net = net;
+
+
+	net->watchdog_timeo = PEGASUS_TX_TIMEOUT;
+	net->netdev_ops = &pegasus_netdev_ops;
+	net->ethtool_ops = &ops;
+	pegasus->mii.dev = net;
+	pegasus->mii.mdio_read = mdio_read;
+	pegasus->mii.mdio_write = mdio_write;
+	pegasus->mii.phy_id_mask = 0x1f;
+	pegasus->mii.reg_num_mask = 0x1f;
+	pegasus->msg_enable = netif_msg_init(msg_level, NETIF_MSG_DRV
+				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
+
+	pegasus->features = usb_dev_id[dev_index].private;
+	get_interrupt_interval(pegasus);
+	if (reset_mac(pegasus)) {
+		dev_err(&intf->dev, "can't reset MAC\n");
+		res = -EIO;
+		goto out2;
+	}
+	set_ethernet_addr(pegasus);
+	if (pegasus->features & PEGASUS_II) {
+		dev_info(&intf->dev, "setup Pegasus II specific registers\n");
+		setup_pegasus_II(pegasus);
+	}
+	pegasus->phy = mii_phy_probe(pegasus);
+	if (pegasus->phy == 0xff) {
+		dev_warn(&intf->dev, "can't locate MII phy, using default\n");
+		pegasus->phy = 1;
+	}
+	pegasus->mii.phy_id = pegasus->phy;
+	usb_set_intfdata(intf, pegasus);
+	SET_NETDEV_DEV(net, &intf->dev);
+	pegasus_reset_wol(net);
+	res = register_netdev(net);
+	if (res)
+		goto out3;
+	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+			   CARRIER_CHECK_DELAY);
+	dev_info(&intf->dev, "%s, %s, %pM\n", net->name,
+		 usb_dev_id[dev_index].name, net->dev_addr);
+	return 0;
+
+out3:
+	usb_set_intfdata(intf, NULL);
+out2:
+	free_all_urbs(pegasus);
+out1:
+	free_netdev(net);
+out:
+	pegasus_dec_workqueue();
+	return res;
+}
+
+static void pegasus_disconnect(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (!pegasus) {
+		dev_dbg(&intf->dev, "unregistering non-bound device?\n");
+		return;
+	}
+
+	pegasus->flags |= PEGASUS_UNPLUG;
+	cancel_delayed_work(&pegasus->carrier_check);
+	unregister_netdev(pegasus->net);
+	unlink_all_urbs(pegasus);
+	free_all_urbs(pegasus);
+	if (pegasus->rx_skb != NULL) {
+		dev_kfree_skb(pegasus->rx_skb);
+		pegasus->rx_skb = NULL;
+	}
+	free_netdev(pegasus->net);
+	pegasus_dec_workqueue();
+}
+
+static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	netif_device_detach(pegasus->net);
+	cancel_delayed_work(&pegasus->carrier_check);
+	if (netif_running(pegasus->net)) {
+		usb_kill_urb(pegasus->rx_urb);
+		usb_kill_urb(pegasus->intr_urb);
+	}
+	return 0;
+}
+
+static int pegasus_resume(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	netif_device_attach(pegasus->net);
+	if (netif_running(pegasus->net)) {
+		pegasus->rx_urb->status = 0;
+		pegasus->rx_urb->actual_length = 0;
+		read_bulk_callback(pegasus->rx_urb);
+
+		pegasus->intr_urb->status = 0;
+		pegasus->intr_urb->actual_length = 0;
+		intr_callback(pegasus->intr_urb);
+	}
+	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+				CARRIER_CHECK_DELAY);
+	return 0;
+}
+
+static const struct net_device_ops pegasus_netdev_ops = {
+	.ndo_open =			pegasus_open,
+	.ndo_stop =			pegasus_close,
+	.ndo_do_ioctl =			pegasus_ioctl,
+	.ndo_start_xmit =		pegasus_start_xmit,
+	.ndo_set_rx_mode =		pegasus_set_multicast,
+	.ndo_get_stats =		pegasus_netdev_stats,
+	.ndo_tx_timeout =		pegasus_tx_timeout,
+	.ndo_change_mtu =		eth_change_mtu,
+	.ndo_set_mac_address =		eth_mac_addr,
+	.ndo_validate_addr =		eth_validate_addr,
+};
+
+static struct usb_driver pegasus_driver = {
+	.name = driver_name,
+	.probe = pegasus_probe,
+	.disconnect = pegasus_disconnect,
+	.id_table = pegasus_ids,
+	.suspend = pegasus_suspend,
+	.resume = pegasus_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+static void __init parse_id(char *id)
+{
+	unsigned int vendor_id = 0, device_id = 0, flags = 0, i = 0;
+	char *token, *name = NULL;
+
+	if ((token = strsep(&id, ":")) != NULL)
+		name = token;
+	/* name now points to a null terminated string*/
+	if ((token = strsep(&id, ":")) != NULL)
+		vendor_id = simple_strtoul(token, NULL, 16);
+	if ((token = strsep(&id, ":")) != NULL)
+		device_id = simple_strtoul(token, NULL, 16);
+	flags = simple_strtoul(id, NULL, 16);
+	pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n",
+		driver_name, name, vendor_id, device_id, flags);
+
+	if (vendor_id > 0x10000 || vendor_id == 0)
+		return;
+	if (device_id > 0x10000 || device_id == 0)
+		return;
+
+	for (i = 0; usb_dev_id[i].name; i++);
+	usb_dev_id[i].name = name;
+	usb_dev_id[i].vendor = vendor_id;
+	usb_dev_id[i].device = device_id;
+	usb_dev_id[i].private = flags;
+	pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+	pegasus_ids[i].idVendor = vendor_id;
+	pegasus_ids[i].idProduct = device_id;
+}
+
+static int __init pegasus_init(void)
+{
+	pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION);
+	if (devid)
+		parse_id(devid);
+	return usb_register(&pegasus_driver);
+}
+
+static void __exit pegasus_exit(void)
+{
+	usb_deregister(&pegasus_driver);
+}
+
+module_init(pegasus_init);
+module_exit(pegasus_exit);
diff -Naur backports-4.2.6-1.org/drivers/net/usb/pegasus.h backports-4.2.6-1/drivers/net/usb/pegasus.h
--- backports-4.2.6-1.org/drivers/net/usb/pegasus.h	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/pegasus.h	2016-06-28 14:35:17.998640551 +0200
@@ -0,0 +1,308 @@
+/*
+ * Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+
+#ifndef	PEGASUS_DEV
+
+#define	PEGASUS_II		0x80000000
+#define	HAS_HOME_PNA		0x40000000
+
+#define	PEGASUS_MTU		1536
+
+#define	EPROM_WRITE		0x01
+#define	EPROM_READ		0x02
+#define	EPROM_DONE		0x04
+#define	EPROM_WR_ENABLE		0x10
+#define	EPROM_LOAD		0x20
+
+#define	PHY_DONE		0x80
+#define	PHY_READ		0x40
+#define	PHY_WRITE		0x20
+#define	DEFAULT_GPIO_RESET	0x24
+#define	DEFAULT_GPIO_SET	0x26
+
+#define	PEGASUS_PRESENT		0x00000001
+#define	PEGASUS_TX_BUSY		0x00000004
+#define	PEGASUS_RX_BUSY		0x00000008
+#define	CTRL_URB_RUNNING	0x00000010
+#define	CTRL_URB_SLEEP		0x00000020
+#define	PEGASUS_UNPLUG		0x00000040
+#define	PEGASUS_RX_URB_FAIL	0x00000080
+
+#define	RX_MULTICAST		2
+#define	RX_PROMISCUOUS		4
+
+#define	REG_TIMEOUT		(HZ)
+#define	PEGASUS_TX_TIMEOUT	(HZ*10)
+
+#define	TX_UNDERRUN		0x80
+#define	EXCESSIVE_COL		0x40
+#define	LATE_COL		0x20
+#define	NO_CARRIER		0x10
+#define	LOSS_CARRIER		0x08
+#define	JABBER_TIMEOUT		0x04
+
+#define	LINK_STATUS		0x01
+
+#define	PEGASUS_REQT_READ	0xc0
+#define	PEGASUS_REQT_WRITE	0x40
+#define	PEGASUS_REQ_GET_REGS	0xf0
+#define	PEGASUS_REQ_SET_REGS	0xf1
+#define	PEGASUS_REQ_SET_REG	PEGASUS_REQ_SET_REGS
+
+enum pegasus_registers {
+	EthCtrl0 = 0,
+	EthCtrl1 = 1,
+	EthCtrl2 = 2,
+	EthID = 0x10,
+	Reg1d = 0x1d,
+	EpromOffset = 0x20,
+	EpromData = 0x21,	/* 0x21 low, 0x22 high byte */
+	EpromCtrl = 0x23,
+	PhyAddr = 0x25,
+	PhyData = 0x26,		/* 0x26 low, 0x27 high byte */
+	PhyCtrl = 0x28,
+	UsbStst = 0x2a,
+	EthTxStat0 = 0x2b,
+	EthTxStat1 = 0x2c,
+	EthRxStat = 0x2d,
+	WakeupControl = 0x78,
+	Reg7b = 0x7b,
+	Gpio0 = 0x7e,
+	Gpio1 = 0x7f,
+	Reg81 = 0x81,
+};
+
+
+typedef struct pegasus {
+	struct usb_device	*usb;
+	struct usb_interface	*intf;
+	struct net_device	*net;
+	struct net_device_stats	stats;
+	struct mii_if_info	mii;
+	unsigned		flags;
+	unsigned		features;
+	u32			msg_enable;
+	u32			wolopts;
+	int			dev_index;
+	int			intr_interval;
+	struct tasklet_struct	rx_tl;
+	struct delayed_work	carrier_check;
+	struct urb		*rx_urb, *tx_urb, *intr_urb;
+	struct sk_buff		*rx_skb;
+	int			chip;
+	unsigned char		intr_buff[8];
+	__u8			tx_buff[PEGASUS_MTU];
+	__u8			eth_regs[4];
+	__u8			phy;
+	__u8			gpio_res;
+} pegasus_t;
+
+
+struct usb_eth_dev {
+	char	*name;
+	__u16	vendor;
+	__u16	device;
+	__u32	private; /* LSB is gpio reset value */
+};
+
+#define	VENDOR_3COM		0x0506
+#define	VENDOR_ABOCOM		0x07b8
+#define	VENDOR_ACCTON		0x083a
+#define	VENDOR_ADMTEK		0x07a6
+#define	VENDOR_AEILAB		0x3334
+#define	VENDOR_ALLIEDTEL	0x07c9
+#define	VENDOR_ATEN		0x0557
+#define	VENDOR_BELKIN		0x050d
+#define	VENDOR_BILLIONTON	0x08dd
+#define	VENDOR_COMPAQ		0x049f
+#define	VENDOR_COREGA		0x07aa
+#define	VENDOR_DLINK		0x2001
+#define	VENDOR_ELCON		0x0db7
+#define	VENDOR_ELECOM		0x056e
+#define	VENDOR_ELSA		0x05cc
+#define	VENDOR_GIGABYTE		0x1044
+#define	VENDOR_HAWKING		0x0e66
+#define	VENDOR_HP		0x03f0
+#define	VENDOR_IODATA		0x04bb
+#define	VENDOR_KINGSTON		0x0951
+#define	VENDOR_LANEED		0x056e
+#define	VENDOR_LINKSYS		0x066b
+#define	VENDOR_LINKSYS2		0x077b
+#define	VENDOR_MELCO		0x0411
+#define	VENDOR_MICROSOFT	0x045e
+#define	VENDOR_MOBILITY		0x1342
+#define	VENDOR_NETGEAR		0x0846
+#define	VENDOR_OCT		0x0b39
+#define	VENDOR_SMARTBRIDGES	0x08d1
+#define	VENDOR_SMC		0x0707
+#define	VENDOR_SOHOWARE		0x15e8
+#define	VENDOR_SIEMENS		0x067c
+
+
+#else	/* PEGASUS_DEV */
+
+PEGASUS_DEV("3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
+		VENDOR_ADMTEK, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
+PEGASUS_DEV("ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
+		VENDOR_ADMTEK, 0x8513,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
+		VENDOR_ADMTEK, 0x8515,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
+		VENDOR_ADMTEK, 0x0986,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("AN986A USB MAC", VENDOR_ADMTEK, 1986,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+/*
+ * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
+ * with the same product IDs by checking the device class too.
+ */
+PEGASUS_DEV_CLASS("Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("D-Link DSB-650", VENDOR_DLINK, 0xabc1,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
+PEGASUS_DEV("ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+		DEFAULT_GPIO_RESET  | PEGASUS_II)
+PEGASUS_DEV("EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("OCT Inc.", VENDOR_OCT, 0x0109,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+
+
+#endif	/* PEGASUS_DEV */
diff -Naur backports-4.2.6-1.org/drivers/net/usb/plusb.c backports-4.2.6-1/drivers/net/usb/plusb.c
--- backports-4.2.6-1.org/drivers/net/usb/plusb.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/plusb.c	2016-06-28 14:35:17.998640551 +0200
@@ -0,0 +1,162 @@
+/*
+ * PL-2301/2302 USB host-to-host link cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ 
+ *
+ * The protocol and handshaking used here should be bug-compatible
+ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
+ *
+ * HEADS UP:  this handshaking isn't all that robust.  This driver
+ * gets confused easily if you unplug one end of the cable then
+ * try to connect it again; you'll need to restart both ends. The
+ * "naplink" software (used by some PlayStation/2 deveopers) does
+ * the handshaking much better!   Also, sometimes this hardware
+ * seems to get wedged under load.  Prolific docs are weak, and
+ * don't identify differences between PL2301 and PL2302, much less
+ * anything to explain the different PL2302 versions observed.
+ *
+ * NOTE:  pl2501 has several modes, including pl2301 and pl2302
+ * compatibility.   Some docs suggest the difference between 2301
+ * and 2302 is only to make MS-Windows use a different driver...
+ *
+ * pl25a1 glue based on patch from Tony Gibbs.  Prolific "docs" on
+ * this chip are as usual incomplete about what control messages
+ * are supported.
+ */
+
+/*
+ * Bits 0-4 can be used for software handshaking; they're set from
+ * one end, cleared from the other, "read" with the interrupt byte.
+ */
+#define	PL_S_EN		(1<<7)		/* (feature only) suspend enable */
+/* reserved bit -- rx ready (6) ? */
+#define	PL_TX_READY	(1<<5)		/* (interrupt only) transmit ready */
+#define	PL_RESET_OUT	(1<<4)		/* reset output pipe */
+#define	PL_RESET_IN	(1<<3)		/* reset input pipe */
+#define	PL_TX_C		(1<<2)		/* transmission complete */
+#define	PL_TX_REQ	(1<<1)		/* transmission received */
+#define	PL_PEER_E	(1<<0)		/* peer exists */
+
+static inline int
+pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
+{
+	return usbnet_read_cmd(dev, req,
+				USB_DIR_IN | USB_TYPE_VENDOR |
+				USB_RECIP_DEVICE,
+				val, index, NULL, 0);
+}
+
+static inline int
+pl_clear_QuickLink_features(struct usbnet *dev, int val)
+{
+	return pl_vendor_req(dev, 1, (u8) val, 0);
+}
+
+static inline int
+pl_set_QuickLink_features(struct usbnet *dev, int val)
+{
+	return pl_vendor_req(dev, 3, (u8) val, 0);
+}
+
+static int pl_reset(struct usbnet *dev)
+{
+	int status;
+
+	/* some units seem to need this reset, others reject it utterly.
+	 * FIXME be more like "naplink" or windows drivers.
+	 */
+	status = pl_set_QuickLink_features(dev,
+		PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+	if (status != 0 && netif_msg_probe(dev))
+		netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
+	return 0;
+}
+
+static const struct driver_info	prolific_info = {
+	.description =	"Prolific PL-2301/PL-2302/PL-25A1",
+	.flags =	FLAG_POINTTOPOINT | FLAG_NO_SETINT,
+		/* some PL-2302 versions seem to fail usb_set_interface() */
+	.reset =	pl_reset,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Proilific's name won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id	products [] = {
+
+/* full speed cables */
+{
+	USB_DEVICE(0x067b, 0x0000),	// PL-2301
+	.driver_info =	(unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x067b, 0x0001),	// PL-2302
+	.driver_info =	(unsigned long) &prolific_info,
+},
+
+/* high speed cables */
+{
+	USB_DEVICE(0x067b, 0x25a1),     /* PL-25A1, no eeprom */
+	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x050d, 0x258a),     /* Belkin F5U258/F5U279 (PL-25A1) */
+	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x3923, 0x7825),     /* National Instruments USB
+					 * Host-to-Host Cable
+					 */
+	.driver_info =  (unsigned long) &prolific_info,
+},
+
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver plusb_driver = {
+	.name =		"plusb",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(plusb_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/r8152.c backports-4.2.6-1/drivers/net/usb/r8152.c
--- backports-4.2.6-1.org/drivers/net/usb/r8152.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/r8152.c	2016-06-28 14:45:32.005250978 +0200
@@ -0,0 +1,2856 @@
+/*
+ *  Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+#include <linux/list.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v1.04.0 (2014/01/15)"
+#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
+#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
+#define MODULENAME "r8152"
+
+#define R8152_PHY_ID		32
+
+#define PLA_IDR			0xc000
+#define PLA_RCR			0xc010
+#define PLA_RMS			0xc016
+#define PLA_RXFIFO_CTRL0	0xc0a0
+#define PLA_RXFIFO_CTRL1	0xc0a4
+#define PLA_RXFIFO_CTRL2	0xc0a8
+#define PLA_FMC			0xc0b4
+#define PLA_CFG_WOL		0xc0b6
+#define PLA_TEREDO_CFG		0xc0bc
+#define PLA_MAR			0xcd00
+#define PLA_BACKUP		0xd000
+#define PAL_BDC_CR		0xd1a0
+#define PLA_TEREDO_TIMER	0xd2cc
+#define PLA_REALWOW_TIMER	0xd2e8
+#define PLA_LEDSEL		0xdd90
+#define PLA_LED_FEATURE		0xdd92
+#define PLA_PHYAR		0xde00
+#define PLA_BOOT_CTRL		0xe004
+#define PLA_GPHY_INTR_IMR	0xe022
+#define PLA_EEE_CR		0xe040
+#define PLA_EEEP_CR		0xe080
+#define PLA_MAC_PWR_CTRL	0xe0c0
+#define PLA_MAC_PWR_CTRL2	0xe0ca
+#define PLA_MAC_PWR_CTRL3	0xe0cc
+#define PLA_MAC_PWR_CTRL4	0xe0ce
+#define PLA_WDT6_CTRL		0xe428
+#define PLA_TCR0		0xe610
+#define PLA_TCR1		0xe612
+#define PLA_TXFIFO_CTRL		0xe618
+#define PLA_RSTTELLY		0xe800
+#define PLA_CR			0xe813
+#define PLA_CRWECR		0xe81c
+#define PLA_CONFIG5		0xe822
+#define PLA_PHY_PWR		0xe84c
+#define PLA_OOB_CTRL		0xe84f
+#define PLA_CPCR		0xe854
+#define PLA_MISC_0		0xe858
+#define PLA_MISC_1		0xe85a
+#define PLA_OCP_GPHY_BASE	0xe86c
+#define PLA_TELLYCNT		0xe890
+#define PLA_SFF_STS_7		0xe8de
+#define PLA_PHYSTATUS		0xe908
+#define PLA_BP_BA		0xfc26
+#define PLA_BP_0		0xfc28
+#define PLA_BP_1		0xfc2a
+#define PLA_BP_2		0xfc2c
+#define PLA_BP_3		0xfc2e
+#define PLA_BP_4		0xfc30
+#define PLA_BP_5		0xfc32
+#define PLA_BP_6		0xfc34
+#define PLA_BP_7		0xfc36
+#define PLA_BP_EN		0xfc38
+
+#define USB_U2P3_CTRL		0xb460
+#define USB_DEV_STAT		0xb808
+#define USB_USB_CTRL		0xd406
+#define USB_PHY_CTRL		0xd408
+#define USB_TX_AGG		0xd40a
+#define USB_RX_BUF_TH		0xd40c
+#define USB_USB_TIMER		0xd428
+#define USB_RX_EARLY_AGG	0xd42c
+#define USB_PM_CTRL_STATUS	0xd432
+#define USB_TX_DMA		0xd434
+#define USB_TOLERANCE		0xd490
+#define USB_LPM_CTRL		0xd41a
+#define USB_UPS_CTRL		0xd800
+#define USB_MISC_0		0xd81a
+#define USB_POWER_CUT		0xd80a
+#define USB_AFE_CTRL2		0xd824
+#define USB_WDT11_CTRL		0xe43c
+#define USB_BP_BA		0xfc26
+#define USB_BP_0		0xfc28
+#define USB_BP_1		0xfc2a
+#define USB_BP_2		0xfc2c
+#define USB_BP_3		0xfc2e
+#define USB_BP_4		0xfc30
+#define USB_BP_5		0xfc32
+#define USB_BP_6		0xfc34
+#define USB_BP_7		0xfc36
+#define USB_BP_EN		0xfc38
+
+/* OCP Registers */
+#define OCP_ALDPS_CONFIG	0x2010
+#define OCP_EEE_CONFIG1		0x2080
+#define OCP_EEE_CONFIG2		0x2092
+#define OCP_EEE_CONFIG3		0x2094
+#define OCP_BASE_MII		0xa400
+#define OCP_EEE_AR		0xa41a
+#define OCP_EEE_DATA		0xa41c
+#define OCP_PHY_STATUS		0xa420
+#define OCP_POWER_CFG		0xa430
+#define OCP_EEE_CFG		0xa432
+#define OCP_SRAM_ADDR		0xa436
+#define OCP_SRAM_DATA		0xa438
+#define OCP_DOWN_SPEED		0xa442
+#define OCP_EEE_CFG2		0xa5d0
+#define OCP_ADC_CFG		0xbc06
+
+/* SRAM Register */
+#define SRAM_LPF_CFG		0x8012
+#define SRAM_10M_AMP1		0x8080
+#define SRAM_10M_AMP2		0x8082
+#define SRAM_IMPEDANCE		0x8084
+
+/* PLA_RCR */
+#define RCR_AAP			0x00000001
+#define RCR_APM			0x00000002
+#define RCR_AM			0x00000004
+#define RCR_AB			0x00000008
+#define RCR_ACPT_ALL		(RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
+
+/* PLA_RXFIFO_CTRL0 */
+#define RXFIFO_THR1_NORMAL	0x00080002
+#define RXFIFO_THR1_OOB		0x01800003
+
+/* PLA_RXFIFO_CTRL1 */
+#define RXFIFO_THR2_FULL	0x00000060
+#define RXFIFO_THR2_HIGH	0x00000038
+#define RXFIFO_THR2_OOB		0x0000004a
+#define RXFIFO_THR2_NORMAL	0x00a0
+
+/* PLA_RXFIFO_CTRL2 */
+#define RXFIFO_THR3_FULL	0x00000078
+#define RXFIFO_THR3_HIGH	0x00000048
+#define RXFIFO_THR3_OOB		0x0000005a
+#define RXFIFO_THR3_NORMAL	0x0110
+
+/* PLA_TXFIFO_CTRL */
+#define TXFIFO_THR_NORMAL	0x00400008
+#define TXFIFO_THR_NORMAL2	0x01000008
+
+/* PLA_FMC */
+#define FMC_FCR_MCU_EN		0x0001
+
+/* PLA_EEEP_CR */
+#define EEEP_CR_EEEP_TX		0x0002
+
+/* PLA_WDT6_CTRL */
+#define WDT6_SET_MODE		0x0010
+
+/* PLA_TCR0 */
+#define TCR0_TX_EMPTY		0x0800
+#define TCR0_AUTO_FIFO		0x0080
+
+/* PLA_TCR1 */
+#define VERSION_MASK		0x7cf0
+
+/* PLA_CR */
+#define CR_RST			0x10
+#define CR_RE			0x08
+#define CR_TE			0x04
+
+/* PLA_CRWECR */
+#define CRWECR_NORAML		0x00
+#define CRWECR_CONFIG		0xc0
+
+/* PLA_OOB_CTRL */
+#define NOW_IS_OOB		0x80
+#define TXFIFO_EMPTY		0x20
+#define RXFIFO_EMPTY		0x10
+#define LINK_LIST_READY		0x02
+#define DIS_MCU_CLROOB		0x01
+#define FIFO_EMPTY		(TXFIFO_EMPTY | RXFIFO_EMPTY)
+
+/* PLA_MISC_1 */
+#define RXDY_GATED_EN		0x0008
+
+/* PLA_SFF_STS_7 */
+#define RE_INIT_LL		0x8000
+#define MCU_BORW_EN		0x4000
+
+/* PLA_CPCR */
+#define CPCR_RX_VLAN		0x0040
+
+/* PLA_CFG_WOL */
+#define MAGIC_EN		0x0001
+
+/* PLA_TEREDO_CFG */
+#define TEREDO_SEL		0x8000
+#define TEREDO_WAKE_MASK	0x7f00
+#define TEREDO_RS_EVENT_MASK	0x00fe
+#define OOB_TEREDO_EN		0x0001
+
+/* PAL_BDC_CR */
+#define ALDPS_PROXY_MODE	0x0001
+
+/* PLA_CONFIG5 */
+#define LAN_WAKE_EN		0x0002
+
+/* PLA_LED_FEATURE */
+#define LED_MODE_MASK		0x0700
+
+/* PLA_PHY_PWR */
+#define TX_10M_IDLE_EN		0x0080
+#define PFM_PWM_SWITCH		0x0040
+
+/* PLA_MAC_PWR_CTRL */
+#define D3_CLK_GATED_EN		0x00004000
+#define MCU_CLK_RATIO		0x07010f07
+#define MCU_CLK_RATIO_MASK	0x0f0f0f0f
+#define ALDPS_SPDWN_RATIO	0x0f87
+
+/* PLA_MAC_PWR_CTRL2 */
+#define EEE_SPDWN_RATIO		0x8007
+
+/* PLA_MAC_PWR_CTRL3 */
+#define PKT_AVAIL_SPDWN_EN	0x0100
+#define SUSPEND_SPDWN_EN	0x0004
+#define U1U2_SPDWN_EN		0x0002
+#define L1_SPDWN_EN		0x0001
+
+/* PLA_MAC_PWR_CTRL4 */
+#define PWRSAVE_SPDWN_EN	0x1000
+#define RXDV_SPDWN_EN		0x0800
+#define TX10MIDLE_EN		0x0100
+#define TP100_SPDWN_EN		0x0020
+#define TP500_SPDWN_EN		0x0010
+#define TP1000_SPDWN_EN		0x0008
+#define EEE_SPDWN_EN		0x0001
+
+/* PLA_GPHY_INTR_IMR */
+#define GPHY_STS_MSK		0x0001
+#define SPEED_DOWN_MSK		0x0002
+#define SPDWN_RXDV_MSK		0x0004
+#define SPDWN_LINKCHG_MSK	0x0008
+
+/* PLA_PHYAR */
+#define PHYAR_FLAG		0x80000000
+
+/* PLA_EEE_CR */
+#define EEE_RX_EN		0x0001
+#define EEE_TX_EN		0x0002
+
+/* PLA_BOOT_CTRL */
+#define AUTOLOAD_DONE		0x0002
+
+/* USB_DEV_STAT */
+#define STAT_SPEED_MASK		0x0006
+#define STAT_SPEED_HIGH		0x0000
+#define STAT_SPEED_FULL		0x0001
+
+/* USB_TX_AGG */
+#define TX_AGG_MAX_THRESHOLD	0x03
+
+/* USB_RX_BUF_TH */
+#define RX_THR_SUPPER		0x0c350180
+#define RX_THR_HIGH		0x7a120180
+#define RX_THR_SLOW		0xffff0180
+
+/* USB_TX_DMA */
+#define TEST_MODE_DISABLE	0x00000001
+#define TX_SIZE_ADJUST1		0x00000100
+
+/* USB_UPS_CTRL */
+#define POWER_CUT		0x0100
+
+/* USB_PM_CTRL_STATUS */
+#define RESUME_INDICATE		0x0001
+
+/* USB_USB_CTRL */
+#define RX_AGG_DISABLE		0x0010
+
+/* USB_U2P3_CTRL */
+#define U2P3_ENABLE		0x0001
+
+/* USB_POWER_CUT */
+#define PWR_EN			0x0001
+#define PHASE2_EN		0x0008
+
+/* USB_MISC_0 */
+#define PCUT_STATUS		0x0001
+
+/* USB_RX_EARLY_AGG */
+#define EARLY_AGG_SUPPER	0x0e832981
+#define EARLY_AGG_HIGH		0x0e837a12
+#define EARLY_AGG_SLOW		0x0e83ffff
+
+/* USB_WDT11_CTRL */
+#define TIMER11_EN		0x0001
+
+/* USB_LPM_CTRL */
+#define LPM_TIMER_MASK		0x0c
+#define LPM_TIMER_500MS		0x04	/* 500 ms */
+#define LPM_TIMER_500US		0x0c	/* 500 us */
+
+/* USB_AFE_CTRL2 */
+#define SEN_VAL_MASK		0xf800
+#define SEN_VAL_NORMAL		0xa000
+#define SEL_RXIDLE		0x0100
+
+/* OCP_ALDPS_CONFIG */
+#define ENPWRSAVE		0x8000
+#define ENPDNPS			0x0200
+#define LINKENA			0x0100
+#define DIS_SDSAVE		0x0010
+
+/* OCP_PHY_STATUS */
+#define PHY_STAT_MASK		0x0007
+#define PHY_STAT_LAN_ON		3
+#define PHY_STAT_PWRDN		5
+
+/* OCP_POWER_CFG */
+#define EEE_CLKDIV_EN		0x8000
+#define EN_ALDPS		0x0004
+#define EN_10M_PLLOFF		0x0001
+
+/* OCP_EEE_CONFIG1 */
+#define RG_TXLPI_MSK_HFDUP	0x8000
+#define RG_MATCLR_EN		0x4000
+#define EEE_10_CAP		0x2000
+#define EEE_NWAY_EN		0x1000
+#define TX_QUIET_EN		0x0200
+#define RX_QUIET_EN		0x0100
+#define SDRISETIME		0x0010	/* bit 4 ~ 6 */
+#define RG_RXLPI_MSK_HFDUP	0x0008
+#define SDFALLTIME		0x0007	/* bit 0 ~ 2 */
+
+/* OCP_EEE_CONFIG2 */
+#define RG_LPIHYS_NUM		0x7000	/* bit 12 ~ 15 */
+#define RG_DACQUIET_EN		0x0400
+#define RG_LDVQUIET_EN		0x0200
+#define RG_CKRSEL		0x0020
+#define RG_EEEPRG_EN		0x0010
+
+/* OCP_EEE_CONFIG3 */
+#define FST_SNR_EYE_R		0x1500	/* bit 7 ~ 15 */
+#define RG_LFS_SEL		0x0060	/* bit 6 ~ 5 */
+#define MSK_PH			0x0006	/* bit 0 ~ 3 */
+
+/* OCP_EEE_AR */
+/* bit[15:14] function */
+#define FUN_ADDR		0x0000
+#define FUN_DATA		0x4000
+/* bit[4:0] device addr */
+#define DEVICE_ADDR		0x0007
+
+/* OCP_EEE_DATA */
+#define EEE_ADDR		0x003C
+#define EEE_DATA		0x0002
+
+/* OCP_EEE_CFG */
+#define CTAP_SHORT_EN		0x0040
+#define EEE10_EN		0x0010
+
+/* OCP_DOWN_SPEED */
+#define EN_10M_BGOFF		0x0080
+
+/* OCP_EEE_CFG2 */
+#define MY1000_EEE		0x0004
+#define MY100_EEE		0x0002
+
+/* OCP_ADC_CFG */
+#define CKADSEL_L		0x0100
+#define ADC_EN			0x0080
+#define EN_EMI_L		0x0040
+
+/* SRAM_LPF_CFG */
+#define LPF_AUTO_TUNE		0x8000
+
+/* SRAM_10M_AMP1 */
+#define GDAC_IB_UPALL		0x0008
+
+/* SRAM_10M_AMP2 */
+#define AMP_DN			0x0200
+
+/* SRAM_IMPEDANCE */
+#define RX_DRIVING_MASK		0x6000
+
+enum rtl_register_content {
+	_1000bps	= 0x10,
+	_100bps		= 0x08,
+	_10bps		= 0x04,
+	LINK_STATUS	= 0x02,
+	FULL_DUP	= 0x01,
+};
+
+#define RTL8152_MAX_TX		10
+#define RTL8152_MAX_RX		10
+#define INTBUFSIZE		2
+#define CRC_SIZE		4
+#define TX_ALIGN		4
+#define RX_ALIGN		8
+
+#define INTR_LINK		0x0004
+
+#define RTL8152_REQT_READ	0xc0
+#define RTL8152_REQT_WRITE	0x40
+#define RTL8152_REQ_GET_REGS	0x05
+#define RTL8152_REQ_SET_REGS	0x05
+
+#define BYTE_EN_DWORD		0xff
+#define BYTE_EN_WORD		0x33
+#define BYTE_EN_BYTE		0x11
+#define BYTE_EN_SIX_BYTES	0x3f
+#define BYTE_EN_START_MASK	0x0f
+#define BYTE_EN_END_MASK	0xf0
+
+#define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + VLAN_HLEN)
+#define RTL8152_TX_TIMEOUT	(HZ)
+
+/* rtl8152 flags */
+enum rtl8152_flags {
+	RTL8152_UNPLUG = 0,
+	RTL8152_SET_RX_MODE,
+	WORK_ENABLE,
+	RTL8152_LINK_CHG,
+};
+
+/* Define these values to match your device */
+#define VENDOR_ID_REALTEK		0x0bda
+#define PRODUCT_ID_RTL8152		0x8152
+#define PRODUCT_ID_RTL8153		0x8153
+
+#define VENDOR_ID_SAMSUNG		0x04e8
+#define PRODUCT_ID_SAMSUNG		0xa101
+
+#define VENDOR_ID_LENOVO		0x17ef
+#define PRODUCT_ID_LENOVO		0x7205
+
+#define VENDOR_ID_NVIDIA		0x0955
+#define PRODUCT_ID_NVIDIA		0x09ff
+
+
+#define MCU_TYPE_PLA			0x0100
+#define MCU_TYPE_USB			0x0000
+
+struct rx_desc {
+	__le32 opts1;
+#define RX_LEN_MASK			0x7fff
+	__le32 opts2;
+	__le32 opts3;
+	__le32 opts4;
+	__le32 opts5;
+	__le32 opts6;
+};
+
+struct tx_desc {
+	__le32 opts1;
+#define TX_FS			(1 << 31) /* First segment of a packet */
+#define TX_LS			(1 << 30) /* Final segment of a packet */
+#define TX_LEN_MASK		0x3ffff
+
+	__le32 opts2;
+#define UDP_CS			(1 << 31) /* Calculate UDP/IP checksum */
+#define TCP_CS			(1 << 30) /* Calculate TCP/IP checksum */
+#define IPV4_CS			(1 << 29) /* Calculate IPv4 checksum */
+#define IPV6_CS			(1 << 28) /* Calculate IPv6 checksum */
+};
+
+struct r8152;
+
+struct rx_agg {
+	struct list_head list;
+	struct urb *urb;
+	struct r8152 *context;
+	void *buffer;
+	void *head;
+};
+
+struct tx_agg {
+	struct list_head list;
+	struct urb *urb;
+	struct r8152 *context;
+	void *buffer;
+	void *head;
+	u32 skb_num;
+	u32 skb_len;
+};
+
+struct r8152 {
+	unsigned long flags;
+	struct usb_device *udev;
+	struct tasklet_struct tl;
+	struct usb_interface *intf;
+	struct net_device *netdev;
+	struct urb *intr_urb;
+	struct tx_agg tx_info[RTL8152_MAX_TX];
+	struct rx_agg rx_info[RTL8152_MAX_RX];
+	struct list_head rx_done, tx_free;
+	struct sk_buff_head tx_queue;
+	spinlock_t rx_lock, tx_lock;
+	struct delayed_work schedule;
+	struct mii_if_info mii;
+
+	struct rtl_ops {
+		void (*init)(struct r8152 *);
+		int (*enable)(struct r8152 *);
+		void (*disable)(struct r8152 *);
+		void (*down)(struct r8152 *);
+		void (*unload)(struct r8152 *);
+	} __no_const rtl_ops;
+
+	int intr_interval;
+	u32 msg_enable;
+	u32 tx_qlen;
+	u16 ocp_base;
+	u8 *intr_buff;
+	u8 version;
+	u8 speed;
+};
+
+enum rtl_version {
+	RTL_VER_UNKNOWN = 0,
+	RTL_VER_01,
+	RTL_VER_02,
+	RTL_VER_03,
+	RTL_VER_04,
+	RTL_VER_05,
+	RTL_VER_MAX
+};
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The RTL chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static const int multicast_filter_limit = 32;
+static unsigned int rx_buf_sz = 16384;
+
+static
+int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	int ret;
+	void *tmp;
+
+	tmp = kmalloc(size, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
+			       RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
+			       value, index, tmp, size, 500);
+
+	memcpy(data, tmp, size);
+	kfree(tmp);
+
+	return ret;
+}
+
+static
+int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	int ret;
+	void *tmp;
+
+	tmp = kmalloc(size, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	memcpy(tmp, data, size);
+
+	ret = usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0),
+			       RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
+			       value, index, tmp, size, 500);
+
+	kfree(tmp);
+	return ret;
+}
+
+static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
+				void *data, u16 type)
+{
+	u16 limit = 64;
+	int ret = 0;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	while (size) {
+		if (size > limit) {
+			ret = get_registers(tp, index, type, limit, data);
+			if (ret < 0)
+				break;
+
+			index += limit;
+			data += limit;
+			size -= limit;
+		} else {
+			ret = get_registers(tp, index, type, size, data);
+			if (ret < 0)
+				break;
+
+			index += size;
+			data += size;
+			size = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+				u16 size, void *data, u16 type)
+{
+	int ret;
+	u16 byteen_start, byteen_end, byen;
+	u16 limit = 512;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	byteen_start = byteen & BYTE_EN_START_MASK;
+	byteen_end = byteen & BYTE_EN_END_MASK;
+
+	byen = byteen_start | (byteen_start << 4);
+	ret = set_registers(tp, index, type | byen, 4, data);
+	if (ret < 0)
+		goto error1;
+
+	index += 4;
+	data += 4;
+	size -= 4;
+
+	if (size) {
+		size -= 4;
+
+		while (size) {
+			if (size > limit) {
+				ret = set_registers(tp, index,
+					type | BYTE_EN_DWORD,
+					limit, data);
+				if (ret < 0)
+					goto error1;
+
+				index += limit;
+				data += limit;
+				size -= limit;
+			} else {
+				ret = set_registers(tp, index,
+					type | BYTE_EN_DWORD,
+					size, data);
+				if (ret < 0)
+					goto error1;
+
+				index += size;
+				data += size;
+				size = 0;
+				break;
+			}
+		}
+
+		byen = byteen_end | (byteen_end >> 4);
+		ret = set_registers(tp, index, type | byen, 4, data);
+		if (ret < 0)
+			goto error1;
+	}
+
+error1:
+	return ret;
+}
+
+static inline
+int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB);
+}
+
+static inline
+int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
+}
+
+static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
+{
+	__le32 data;
+
+	generic_ocp_read(tp, index, sizeof(data), &data, type);
+
+	return __le32_to_cpu(data);
+}
+
+static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	__le32 tmp = __cpu_to_le32(data);
+
+	generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type);
+}
+
+static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	__le32 tmp;
+	u8 shift = index & 2;
+
+	index &= ~3;
+
+	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
+
+	data = __le32_to_cpu(tmp);
+	data >>= (shift * 8);
+	data &= 0xffff;
+
+	return (u16)data;
+}
+
+static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 mask = 0xffff;
+	__le32 tmp;
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+
+	data &= mask;
+
+	if (index & 2) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
+
+	data |= __le32_to_cpu(tmp) & ~mask;
+	tmp = __cpu_to_le32(data);
+
+	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
+}
+
+static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	__le32 tmp;
+	u8 shift = index & 3;
+
+	index &= ~3;
+
+	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
+
+	data = __le32_to_cpu(tmp);
+	data >>= (shift * 8);
+	data &= 0xff;
+
+	return (u8)data;
+}
+
+static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 mask = 0xff;
+	__le32 tmp;
+	u16 byen = BYTE_EN_BYTE;
+	u8 shift = index & 3;
+
+	data &= mask;
+
+	if (index & 3) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
+
+	data |= __le32_to_cpu(tmp) & ~mask;
+	tmp = __cpu_to_le32(data);
+
+	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
+}
+
+static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
+{
+	u16 ocp_base, ocp_index;
+
+	ocp_base = addr & 0xf000;
+	if (ocp_base != tp->ocp_base) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		tp->ocp_base = ocp_base;
+	}
+
+	ocp_index = (addr & 0x0fff) | 0xb000;
+	return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
+}
+
+static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
+{
+	u16 ocp_base, ocp_index;
+
+	ocp_base = addr & 0xf000;
+	if (ocp_base != tp->ocp_base) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		tp->ocp_base = ocp_base;
+	}
+
+	ocp_index = (addr & 0x0fff) | 0xb000;
+	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
+}
+
+static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
+{
+	ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value);
+}
+
+static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
+{
+	return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
+}
+
+static void sram_write(struct r8152 *tp, u16 addr, u16 data)
+{
+	ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+	ocp_reg_write(tp, OCP_SRAM_DATA, data);
+}
+
+static u16 sram_read(struct r8152 *tp, u16 addr)
+{
+	ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+	return ocp_reg_read(tp, OCP_SRAM_DATA);
+}
+
+static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (phy_id != R8152_PHY_ID)
+		return -EINVAL;
+
+	return r8152_mdio_read(tp, reg);
+}
+
+static
+void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (phy_id != R8152_PHY_ID)
+		return;
+
+	r8152_mdio_write(tp, reg, val);
+}
+
+static
+int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
+
+static inline void set_ethernet_addr(struct r8152 *tp)
+{
+	struct net_device *dev = tp->netdev;
+	u8 node_id[8] = {0};
+
+	if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0)
+		netif_notice(tp, probe, dev, "inet addr fail\n");
+	else {
+		memcpy(dev->dev_addr, node_id, dev->addr_len);
+		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+	}
+}
+
+static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	return 0;
+}
+
+static struct net_device_stats *rtl8152_get_stats(struct net_device *dev)
+{
+	return &dev->stats;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	struct net_device *netdev;
+	unsigned long flags;
+	int status = urb->status;
+	struct rx_agg *agg;
+	struct r8152 *tp;
+	int result;
+
+	agg = urb->context;
+	if (!agg)
+		return;
+
+	tp = agg->context;
+	if (!tp)
+		return;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	netdev = tp->netdev;
+
+	/* When link down, the driver would cancel all bulks. */
+	/* This avoid the re-submitting bulk */
+	if (!netif_carrier_ok(netdev))
+		return;
+
+	switch (status) {
+	case 0:
+		if (urb->actual_length < ETH_ZLEN)
+			break;
+
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		tasklet_schedule(&tp->tl);
+		return;
+	case -ESHUTDOWN:
+		set_bit(RTL8152_UNPLUG, &tp->flags);
+		netif_device_detach(tp->netdev);
+		return;
+	case -ENOENT:
+		return;	/* the urb is in unlink state */
+	case -ETIME:
+		if (net_ratelimit())
+			netdev_warn(netdev, "maybe reset is needed?\n");
+		break;
+	default:
+		if (net_ratelimit())
+			netdev_warn(netdev, "Rx status %d\n", status);
+		break;
+	}
+
+	result = r8152_submit_rx(tp, agg, GFP_ATOMIC);
+	if (result == -ENODEV) {
+		netif_device_detach(tp->netdev);
+	} else if (result) {
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		tasklet_schedule(&tp->tl);
+	}
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	struct net_device_stats *stats;
+	unsigned long flags;
+	struct tx_agg *agg;
+	struct r8152 *tp;
+	int status = urb->status;
+
+	agg = urb->context;
+	if (!agg)
+		return;
+
+	tp = agg->context;
+	if (!tp)
+		return;
+
+	stats = rtl8152_get_stats(tp->netdev);
+	if (status) {
+		if (net_ratelimit())
+			netdev_warn(tp->netdev, "Tx status %d\n", status);
+		stats->tx_errors += agg->skb_num;
+	} else {
+		stats->tx_packets += agg->skb_num;
+		stats->tx_bytes += agg->skb_len;
+	}
+
+	spin_lock_irqsave(&tp->tx_lock, flags);
+	list_add_tail(&agg->list, &tp->tx_free);
+	spin_unlock_irqrestore(&tp->tx_lock, flags);
+
+	if (!netif_carrier_ok(tp->netdev))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+
+	if (!skb_queue_empty(&tp->tx_queue))
+		tasklet_schedule(&tp->tl);
+}
+
+static void intr_callback(struct urb *urb)
+{
+	struct r8152 *tp;
+	__le16 *d;
+	int status = urb->status;
+	int res;
+
+	tp = urb->context;
+	if (!tp)
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ESHUTDOWN:
+		netif_device_detach(tp->netdev);
+	case -ENOENT:
+		return;
+	case -EOVERFLOW:
+		netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
+		goto resubmit;
+	/* -EPIPE:  should clear the halt */
+	default:
+		netif_info(tp, intr, tp->netdev, "intr status %d\n", status);
+		goto resubmit;
+	}
+
+	d = urb->transfer_buffer;
+	if (INTR_LINK & __le16_to_cpu(d[0])) {
+		if (!(tp->speed & LINK_STATUS)) {
+			set_bit(RTL8152_LINK_CHG, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		}
+	} else {
+		if (tp->speed & LINK_STATUS) {
+			set_bit(RTL8152_LINK_CHG, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		}
+	}
+
+resubmit:
+	res = usb_submit_urb(urb, GFP_ATOMIC);
+	if (res == -ENODEV)
+		netif_device_detach(tp->netdev);
+	else if (res)
+		netif_err(tp, intr, tp->netdev,
+			  "can't resubmit intr, status %d\n", res);
+}
+
+static inline void *rx_agg_align(void *data)
+{
+	return (void *)ALIGN((uintptr_t)data, RX_ALIGN);
+}
+
+static inline void *tx_agg_align(void *data)
+{
+	return (void *)ALIGN((uintptr_t)data, TX_ALIGN);
+}
+
+static void free_all_mem(struct r8152 *tp)
+{
+	int i;
+
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		usb_free_urb(tp->rx_info[i].urb);
+		tp->rx_info[i].urb = NULL;
+
+		kfree(tp->rx_info[i].buffer);
+		tp->rx_info[i].buffer = NULL;
+		tp->rx_info[i].head = NULL;
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++) {
+		usb_free_urb(tp->tx_info[i].urb);
+		tp->tx_info[i].urb = NULL;
+
+		kfree(tp->tx_info[i].buffer);
+		tp->tx_info[i].buffer = NULL;
+		tp->tx_info[i].head = NULL;
+	}
+
+	usb_free_urb(tp->intr_urb);
+	tp->intr_urb = NULL;
+
+	kfree(tp->intr_buff);
+	tp->intr_buff = NULL;
+}
+
+static int alloc_all_mem(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	struct usb_interface *intf = tp->intf;
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	struct usb_host_endpoint *ep_intr = alt->endpoint + 2;
+	struct urb *urb;
+	int node, i;
+	u8 *buf;
+
+	node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
+
+	spin_lock_init(&tp->rx_lock);
+	spin_lock_init(&tp->tx_lock);
+	INIT_LIST_HEAD(&tp->rx_done);
+	INIT_LIST_HEAD(&tp->tx_free);
+	skb_queue_head_init(&tp->tx_queue);
+
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		buf = kmalloc_node(rx_buf_sz, GFP_KERNEL, node);
+		if (!buf)
+			goto err1;
+
+		if (buf != rx_agg_align(buf)) {
+			kfree(buf);
+			buf = kmalloc_node(rx_buf_sz + RX_ALIGN, GFP_KERNEL,
+					   node);
+			if (!buf)
+				goto err1;
+		}
+
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buf);
+			goto err1;
+		}
+
+		INIT_LIST_HEAD(&tp->rx_info[i].list);
+		tp->rx_info[i].context = tp;
+		tp->rx_info[i].urb = urb;
+		tp->rx_info[i].buffer = buf;
+		tp->rx_info[i].head = rx_agg_align(buf);
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++) {
+		buf = kmalloc_node(rx_buf_sz, GFP_KERNEL, node);
+		if (!buf)
+			goto err1;
+
+		if (buf != tx_agg_align(buf)) {
+			kfree(buf);
+			buf = kmalloc_node(rx_buf_sz + TX_ALIGN, GFP_KERNEL,
+					   node);
+			if (!buf)
+				goto err1;
+		}
+
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buf);
+			goto err1;
+		}
+
+		INIT_LIST_HEAD(&tp->tx_info[i].list);
+		tp->tx_info[i].context = tp;
+		tp->tx_info[i].urb = urb;
+		tp->tx_info[i].buffer = buf;
+		tp->tx_info[i].head = tx_agg_align(buf);
+
+		list_add_tail(&tp->tx_info[i].list, &tp->tx_free);
+	}
+
+	tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->intr_urb)
+		goto err1;
+
+	tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+	if (!tp->intr_buff)
+		goto err1;
+
+	tp->intr_interval = (int)ep_intr->desc.bInterval;
+	usb_fill_int_urb(tp->intr_urb, tp->udev, usb_rcvintpipe(tp->udev, 3),
+		     tp->intr_buff, INTBUFSIZE, intr_callback,
+		     tp, tp->intr_interval);
+
+	return 0;
+
+err1:
+	free_all_mem(tp);
+	return -ENOMEM;
+}
+
+static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
+{
+	struct tx_agg *agg = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->tx_lock, flags);
+	if (!list_empty(&tp->tx_free)) {
+		struct list_head *cursor;
+
+		cursor = tp->tx_free.next;
+		list_del_init(cursor);
+		agg = list_entry(cursor, struct tx_agg, list);
+	}
+	spin_unlock_irqrestore(&tp->tx_lock, flags);
+
+	return agg;
+}
+
+static void
+r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
+{
+	memset(desc, 0, sizeof(*desc));
+
+	desc->opts1 = cpu_to_le32((skb->len & TX_LEN_MASK) | TX_FS | TX_LS);
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		__be16 protocol;
+		u8 ip_protocol;
+		u32 opts2 = 0;
+
+		if (skb->protocol == htons(ETH_P_8021Q))
+			protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
+		else
+			protocol = skb->protocol;
+
+		switch (protocol) {
+		case htons(ETH_P_IP):
+			opts2 |= IPV4_CS;
+			ip_protocol = ip_hdr(skb)->protocol;
+			break;
+
+		case htons(ETH_P_IPV6):
+			opts2 |= IPV6_CS;
+			ip_protocol = ipv6_hdr(skb)->nexthdr;
+			break;
+
+		default:
+			ip_protocol = IPPROTO_RAW;
+			break;
+		}
+
+		if (ip_protocol == IPPROTO_TCP) {
+			opts2 |= TCP_CS;
+			opts2 |= (skb_transport_offset(skb) & 0x7fff) << 17;
+		} else if (ip_protocol == IPPROTO_UDP) {
+			opts2 |= UDP_CS;
+		} else {
+			WARN_ON_ONCE(1);
+		}
+
+		desc->opts2 = cpu_to_le32(opts2);
+	}
+}
+
+static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
+{
+	int remain;
+	u8 *tx_data;
+
+	tx_data = agg->head;
+	agg->skb_num = agg->skb_len = 0;
+	remain = rx_buf_sz;
+
+	while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
+		struct tx_desc *tx_desc;
+		struct sk_buff *skb;
+		unsigned int len;
+
+		skb = skb_dequeue(&tp->tx_queue);
+		if (!skb)
+			break;
+
+		remain -= sizeof(*tx_desc);
+		len = skb->len;
+		if (remain < len) {
+			skb_queue_head(&tp->tx_queue, skb);
+			break;
+		}
+
+		tx_data = tx_agg_align(tx_data);
+		tx_desc = (struct tx_desc *)tx_data;
+		tx_data += sizeof(*tx_desc);
+
+		r8152_tx_csum(tp, tx_desc, skb);
+		memcpy(tx_data, skb->data, len);
+		agg->skb_num++;
+		agg->skb_len += len;
+		dev_kfree_skb_any(skb);
+
+		tx_data += len;
+		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
+	}
+
+	netif_tx_lock(tp->netdev);
+
+	if (netif_queue_stopped(tp->netdev) &&
+	    skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
+		netif_wake_queue(tp->netdev);
+
+	netif_tx_unlock(tp->netdev);
+
+	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
+			  agg->head, (int)(tx_data - (u8 *)agg->head),
+			  (usb_complete_t)write_bulk_callback, agg);
+
+	return usb_submit_urb(agg->urb, GFP_ATOMIC);
+}
+
+static void rx_bottom(struct r8152 *tp)
+{
+	unsigned long flags;
+	struct list_head *cursor, *next;
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	list_for_each_safe(cursor, next, &tp->rx_done) {
+		struct rx_desc *rx_desc;
+		struct rx_agg *agg;
+		int len_used = 0;
+		struct urb *urb;
+		u8 *rx_data;
+		int ret;
+
+		list_del_init(cursor);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+		agg = list_entry(cursor, struct rx_agg, list);
+		urb = agg->urb;
+		if (urb->actual_length < ETH_ZLEN)
+			goto submit;
+
+		rx_desc = agg->head;
+		rx_data = agg->head;
+		len_used += sizeof(struct rx_desc);
+
+		while (urb->actual_length > len_used) {
+			struct net_device *netdev = tp->netdev;
+			struct net_device_stats *stats;
+			unsigned int pkt_len;
+			struct sk_buff *skb;
+
+			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
+			if (pkt_len < ETH_ZLEN)
+				break;
+
+			len_used += pkt_len;
+			if (urb->actual_length < len_used)
+				break;
+
+			stats = rtl8152_get_stats(netdev);
+
+			pkt_len -= CRC_SIZE;
+			rx_data += sizeof(struct rx_desc);
+
+			skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
+			if (!skb) {
+				stats->rx_dropped++;
+				break;
+			}
+			memcpy(skb->data, rx_data, pkt_len);
+			skb_put(skb, pkt_len);
+			skb->protocol = eth_type_trans(skb, netdev);
+			netif_rx(skb);
+			stats->rx_packets++;
+			stats->rx_bytes += pkt_len;
+
+			rx_data = rx_agg_align(rx_data + pkt_len + CRC_SIZE);
+			rx_desc = (struct rx_desc *)rx_data;
+			len_used = (int)(rx_data - (u8 *)agg->head);
+			len_used += sizeof(struct rx_desc);
+		}
+
+submit:
+		ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		if (ret && ret != -ENODEV) {
+			list_add_tail(&agg->list, next);
+			tasklet_schedule(&tp->tl);
+		}
+	}
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+}
+
+static void tx_bottom(struct r8152 *tp)
+{
+	int res;
+
+	do {
+		struct tx_agg *agg;
+
+		if (skb_queue_empty(&tp->tx_queue))
+			break;
+
+		agg = r8152_get_tx_agg(tp);
+		if (!agg)
+			break;
+
+		res = r8152_tx_agg_fill(tp, agg);
+		if (res) {
+			struct net_device_stats *stats;
+			struct net_device *netdev;
+			unsigned long flags;
+
+			netdev = tp->netdev;
+			stats = rtl8152_get_stats(netdev);
+
+			if (res == -ENODEV) {
+				netif_device_detach(netdev);
+			} else {
+				netif_warn(tp, tx_err, netdev,
+					   "failed tx_urb %d\n", res);
+				stats->tx_dropped += agg->skb_num;
+				spin_lock_irqsave(&tp->tx_lock, flags);
+				list_add_tail(&agg->list, &tp->tx_free);
+				spin_unlock_irqrestore(&tp->tx_lock, flags);
+			}
+		}
+	} while (res == 0);
+}
+
+static void bottom_half(unsigned long data)
+{
+	struct r8152 *tp;
+
+	tp = (struct r8152 *)data;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	/* When link down, the driver would cancel all bulks. */
+	/* This avoid the re-submitting bulk */
+	if (!netif_carrier_ok(tp->netdev))
+		return;
+
+	rx_bottom(tp);
+	tx_bottom(tp);
+}
+
+static
+int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
+{
+	usb_fill_bulk_urb(agg->urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
+		      agg->head, rx_buf_sz,
+		      (usb_complete_t)read_bulk_callback, agg);
+
+	return usb_submit_urb(agg->urb, mem_flags);
+}
+
+static void rtl8152_tx_timeout(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int i;
+
+	netif_warn(tp, tx_err, netdev, "Tx timeout\n");
+	for (i = 0; i < RTL8152_MAX_TX; i++)
+		usb_unlink_urb(tp->tx_info[i].urb);
+}
+
+static void rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (tp->speed & LINK_STATUS) {
+		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 0);
+	}
+}
+
+static void _rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u32 mc_filter[2];	/* Multicast hash filter */
+	__le32 tmp[2];
+	u32 ocp_data;
+
+	clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+	netif_stop_queue(netdev);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_data |= RCR_AB | RCR_APM;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		netif_notice(tp, link, netdev, "Promiscuous mode enabled\n");
+		ocp_data |= RCR_AM | RCR_AAP;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((netdev_mc_count(netdev) > multicast_filter_limit) ||
+		   (netdev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		ocp_data |= RCR_AM;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct netdev_hw_addr *ha;
+
+		mc_filter[1] = mc_filter[0] = 0;
+		netdev_for_each_mc_addr(ha, netdev) {
+			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			ocp_data |= RCR_AM;
+		}
+	}
+
+	tmp[0] = __cpu_to_le32(swab32(mc_filter[1]));
+	tmp[1] = __cpu_to_le32(swab32(mc_filter[0]));
+
+	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	netif_wake_queue(netdev);
+}
+
+static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
+					    struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	skb_tx_timestamp(skb);
+
+	skb_queue_tail(&tp->tx_queue, skb);
+
+	if (list_empty(&tp->tx_free) &&
+	    skb_queue_len(&tp->tx_queue) > tp->tx_qlen)
+		netif_stop_queue(netdev);
+
+	if (!list_empty(&tp->tx_free))
+		tasklet_schedule(&tp->tl);
+
+	return NETDEV_TX_OK;
+}
+
+static void r8152b_reset_packet_filter(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
+	ocp_data &= ~FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+	ocp_data |= FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+}
+
+static void rtl8152_nic_reset(struct r8152 *tp)
+{
+	int	i;
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
+
+	for (i = 0; i < 1000; i++) {
+		if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
+			break;
+		udelay(100);
+	}
+}
+
+static void set_tx_qlen(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	tp->tx_qlen = rx_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + VLAN_HLEN +
+				   sizeof(struct tx_desc));
+}
+
+static inline u8 rtl8152_get_speed(struct r8152 *tp)
+{
+	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+}
+
+static void rtl_set_eee_plus(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u8 speed;
+
+	speed = rtl8152_get_speed(tp);
+	if (speed & _10bps) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data |= EEEP_CR_EEEP_TX;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+	} else {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data &= ~EEEP_CR_EEEP_TX;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+	}
+}
+
+static int rtl_enable(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i, ret;
+
+	r8152b_reset_packet_filter(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+	ocp_data |= CR_RE | CR_TE;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	INIT_LIST_HEAD(&tp->rx_done);
+	ret = 0;
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		INIT_LIST_HEAD(&tp->rx_info[i].list);
+		ret |= r8152_submit_rx(tp, &tp->rx_info[i], GFP_KERNEL);
+	}
+
+	return ret;
+}
+
+static int rtl8152_enable(struct r8152 *tp)
+{
+	set_tx_qlen(tp);
+	rtl_set_eee_plus(tp);
+
+	return rtl_enable(tp);
+}
+
+static void r8153_set_rx_agg(struct r8152 *tp)
+{
+	u8 speed;
+
+	speed = rtl8152_get_speed(tp);
+	if (speed & _1000bps) {
+		if (tp->udev->speed == USB_SPEED_SUPER) {
+			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
+					RX_THR_SUPPER);
+			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
+					EARLY_AGG_SUPPER);
+		} else {
+			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
+					RX_THR_HIGH);
+			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
+					EARLY_AGG_HIGH);
+		}
+	} else {
+		ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW);
+		ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
+				EARLY_AGG_SLOW);
+	}
+}
+
+static int rtl8153_enable(struct r8152 *tp)
+{
+	set_tx_qlen(tp);
+	rtl_set_eee_plus(tp);
+	r8153_set_rx_agg(tp);
+
+	return rtl_enable(tp);
+}
+
+static void rtl8152_disable(struct r8152 *tp)
+{
+	struct net_device_stats *stats = rtl8152_get_stats(tp->netdev);
+	struct sk_buff *skb;
+	u32 ocp_data;
+	int i;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	while ((skb = skb_dequeue(&tp->tx_queue))) {
+		dev_kfree_skb(skb);
+		stats->tx_dropped++;
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++)
+		usb_kill_urb(tp->tx_info[i].urb);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
+			break;
+		mdelay(1);
+	}
+
+	for (i = 0; i < 1000; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
+			break;
+		mdelay(1);
+	}
+
+	for (i = 0; i < RTL8152_MAX_RX; i++)
+		usb_kill_urb(tp->rx_info[i].urb);
+
+	rtl8152_nic_reset(tp);
+}
+
+static void r8152b_exit_oob(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT);
+	ocp_data &= STAT_SPEED_MASK;
+	if (ocp_data == STAT_SPEED_FULL) {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_FULL);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_FULL);
+	} else {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_HIGH);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_HIGH);
+	}
+
+	/* TX share fifo free credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
+
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
+			TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data &= ~CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data |= TCR0_AUTO_FIFO;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+}
+
+static void r8152b_enter_oob(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
+
+	rtl8152_disable(tp);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data |= MAGIC_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data |= CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
+	ocp_data |= ALDPS_PROXY_MODE;
+	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static void r8152b_disable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
+	msleep(20);
+}
+
+static inline void r8152b_enable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+					    LINKENA | DIS_SDSAVE);
+}
+
+static void r8153_hw_phy_cfg(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
+	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+
+	if (tp->version == RTL_VER_03) {
+		data = ocp_reg_read(tp, OCP_EEE_CFG);
+		data &= ~CTAP_SHORT_EN;
+		ocp_reg_write(tp, OCP_EEE_CFG, data);
+	}
+
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data |= EEE_CLKDIV_EN;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+
+	data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+	data |= EN_10M_BGOFF;
+	ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data |= EN_10M_PLLOFF;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+	data = sram_read(tp, SRAM_IMPEDANCE);
+	data &= ~RX_DRIVING_MASK;
+	sram_write(tp, SRAM_IMPEDANCE, data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+	data = sram_read(tp, SRAM_LPF_CFG);
+	data |= LPF_AUTO_TUNE;
+	sram_write(tp, SRAM_LPF_CFG, data);
+
+	data = sram_read(tp, SRAM_10M_AMP1);
+	data |= GDAC_IB_UPALL;
+	sram_write(tp, SRAM_10M_AMP1, data);
+	data = sram_read(tp, SRAM_10M_AMP2);
+	data |= AMP_DN;
+	sram_write(tp, SRAM_10M_AMP2, data);
+}
+
+static void r8153_u1u2en(struct r8152 *tp, int enable)
+{
+	u8 u1u2[8];
+
+	if (enable)
+		memset(u1u2, 0xff, sizeof(u1u2));
+	else
+		memset(u1u2, 0x00, sizeof(u1u2));
+
+	usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
+}
+
+static void r8153_u2p3en(struct r8152 *tp, int enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+	if (enable)
+		ocp_data |= U2P3_ENABLE;
+	else
+		ocp_data &= ~U2P3_ENABLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+}
+
+static void r8153_power_cut_en(struct r8152 *tp, int enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+	if (enable)
+		ocp_data |= PWR_EN | PHASE2_EN;
+	else
+		ocp_data &= ~(PWR_EN | PHASE2_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	ocp_data &= ~PCUT_STATUS;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
+static void r8153_teredo_off(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+	ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
+}
+
+static void r8153_first_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	r8153_teredo_off(tp);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	r8153_hw_phy_cfg(tp);
+
+	rtl8152_nic_reset(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data &= ~CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data |= TCR0_AUTO_FIFO;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
+	/* TX share fifo free credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
+
+	/* rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~RX_AGG_DISABLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+}
+
+static void r8153_enter_oob(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	rtl8152_disable(tp);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data |= MAGIC_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+	ocp_data &= ~TEREDO_WAKE_MASK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data |= CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
+	ocp_data |= ALDPS_PROXY_MODE;
+	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static void r8153_disable_aldps(struct r8152 *tp)
+{
+	u16 data;
+
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data &= ~EN_ALDPS;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+	msleep(20);
+}
+
+static void r8153_enable_aldps(struct r8152 *tp)
+{
+	u16 data;
+
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data |= EN_ALDPS;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+}
+
+static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
+{
+	u16 bmcr, anar, gbcr;
+	int ret = 0;
+
+	cancel_delayed_work_sync(&tp->schedule);
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
+		  ADVERTISE_100HALF | ADVERTISE_100FULL);
+	if (tp->mii.supports_gmii) {
+		gbcr = r8152_mdio_read(tp, MII_CTRL1000);
+		gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+	} else {
+		gbcr = 0;
+	}
+
+	if (autoneg == AUTONEG_DISABLE) {
+		if (speed == SPEED_10) {
+			bmcr = 0;
+			anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+		} else if (speed == SPEED_100) {
+			bmcr = BMCR_SPEED100;
+			anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+		} else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
+			bmcr = BMCR_SPEED1000;
+			gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (duplex == DUPLEX_FULL)
+			bmcr |= BMCR_FULLDPLX;
+	} else {
+		if (speed == SPEED_10) {
+			if (duplex == DUPLEX_FULL)
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+			else
+				anar |= ADVERTISE_10HALF;
+		} else if (speed == SPEED_100) {
+			if (duplex == DUPLEX_FULL) {
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+			} else {
+				anar |= ADVERTISE_10HALF;
+				anar |= ADVERTISE_100HALF;
+			}
+		} else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
+			if (duplex == DUPLEX_FULL) {
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+				gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+			} else {
+				anar |= ADVERTISE_10HALF;
+				anar |= ADVERTISE_100HALF;
+				gbcr |= ADVERTISE_1000HALF;
+			}
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+	}
+
+	if (tp->mii.supports_gmii)
+		r8152_mdio_write(tp, MII_CTRL1000, gbcr);
+
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+	r8152_mdio_write(tp, MII_BMCR, bmcr);
+
+out:
+
+	return ret;
+}
+
+static void rtl8152_down(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	r8152b_disable_aldps(tp);
+	r8152b_enter_oob(tp);
+	r8152b_enable_aldps(tp);
+}
+
+static void rtl8153_down(struct r8152 *tp)
+{
+	r8153_u1u2en(tp, 0);
+	r8153_power_cut_en(tp, 0);
+	r8153_disable_aldps(tp);
+	r8153_enter_oob(tp);
+	r8153_enable_aldps(tp);
+}
+
+static void set_carrier(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	u8 speed;
+
+	clear_bit(RTL8152_LINK_CHG, &tp->flags);
+	speed = rtl8152_get_speed(tp);
+
+	if (speed & LINK_STATUS) {
+		if (!(tp->speed & LINK_STATUS)) {
+			tp->rtl_ops.enable(tp);
+			set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+			netif_carrier_on(netdev);
+		}
+	} else {
+		if (tp->speed & LINK_STATUS) {
+			netif_carrier_off(netdev);
+			tasklet_disable(&tp->tl);
+			tp->rtl_ops.disable(tp);
+			tasklet_enable(&tp->tl);
+		}
+	}
+	tp->speed = speed;
+}
+
+static void rtl_work_func_t(struct work_struct *work)
+{
+	struct r8152 *tp = container_of(work, struct r8152, schedule.work);
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		goto out1;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		goto out1;
+
+	if (test_bit(RTL8152_LINK_CHG, &tp->flags))
+		set_carrier(tp);
+
+	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
+		_rtl8152_set_rx_mode(tp->netdev);
+
+out1:
+	return;
+}
+
+static int rtl8152_open(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	rtl8152_set_speed(tp, AUTONEG_ENABLE,
+			  tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
+			  DUPLEX_FULL);
+	tp->speed = 0;
+	netif_carrier_off(netdev);
+	netif_start_queue(netdev);
+	set_bit(WORK_ENABLE, &tp->flags);
+	res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+	if (res) {
+		if (res == -ENODEV)
+			netif_device_detach(tp->netdev);
+		netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
+			   res);
+	}
+
+
+	return res;
+}
+
+static int rtl8152_close(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	clear_bit(WORK_ENABLE, &tp->flags);
+	usb_kill_urb(tp->intr_urb);
+	cancel_delayed_work_sync(&tp->schedule);
+	netif_stop_queue(netdev);
+	tasklet_disable(&tp->tl);
+	tp->rtl_ops.disable(tp);
+	tasklet_enable(&tp->tl);
+
+	return res;
+}
+
+static void rtl_clear_bp(struct r8152 *tp)
+{
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
+	mdelay(3);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
+}
+
+static void r8153_clear_bp(struct r8152 *tp)
+{
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
+	rtl_clear_bp(tp);
+}
+
+static void r8152b_enable_eee(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data |= EEE_RX_EN | EEE_TX_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN |
+					   EEE_10_CAP | EEE_NWAY_EN |
+					   TX_QUIET_EN | RX_QUIET_EN |
+					   SDRISETIME | RG_RXLPI_MSK_HFDUP |
+					   SDFALLTIME);
+	ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN |
+					   RG_LDVQUIET_EN | RG_CKRSEL |
+					   RG_EEEPRG_EN);
+	ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+}
+
+static void r8153_enable_eee(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data |= EEE_RX_EN | EEE_TX_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	data = ocp_reg_read(tp, OCP_EEE_CFG);
+	data |= EEE10_EN;
+	ocp_reg_write(tp, OCP_EEE_CFG, data);
+	data = ocp_reg_read(tp, OCP_EEE_CFG2);
+	data |= MY1000_EEE | MY100_EEE;
+	ocp_reg_write(tp, OCP_EEE_CFG2, data);
+}
+
+static void r8152b_enable_fc(struct r8152 *tp)
+{
+	u16 anar;
+
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+}
+
+static void r8152b_hw_phy_cfg(struct r8152 *tp)
+{
+	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+	r8152b_disable_aldps(tp);
+}
+
+static void r8152b_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	rtl_clear_bp(tp);
+
+	if (tp->version == RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+		ocp_data &= ~LED_MODE_MASK;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+	}
+
+	r8152b_hw_phy_cfg(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RESUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+
+	r8152b_exit_oob(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
+	ocp_data &= ~MCU_CLK_RATIO_MASK;
+	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
+	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
+		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
+
+	r8152b_enable_eee(tp);
+	r8152b_enable_aldps(tp);
+	r8152b_enable_fc(tp);
+
+	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
+				       BMCR_ANRESTART);
+	for (i = 0; i < 100; i++) {
+		udelay(100);
+		if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET))
+			break;
+	}
+
+	/* enable rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~RX_AGG_DISABLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+}
+
+static void r8153_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	r8153_u1u2en(tp, 0);
+
+	for (i = 0; i < 500; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+		    AUTOLOAD_DONE)
+			break;
+		msleep(20);
+	}
+
+	for (i = 0; i < 500; i++) {
+		ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK;
+		if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN)
+			break;
+		msleep(20);
+	}
+
+	r8153_u2p3en(tp, 0);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
+	ocp_data &= ~TIMER11_EN;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
+
+	r8153_clear_bp(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+	ocp_data &= ~LED_MODE_MASK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL);
+	ocp_data &= ~LPM_TIMER_MASK;
+	if (tp->udev->speed == USB_SPEED_SUPER)
+		ocp_data |= LPM_TIMER_500US;
+	else
+		ocp_data |= LPM_TIMER_500MS;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
+	ocp_data &= ~SEN_VAL_MASK;
+	ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
+
+	r8153_power_cut_en(tp, 0);
+	r8153_u1u2en(tp, 1);
+
+	r8153_first_init(tp);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+		       PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
+		       U1U2_SPDWN_EN | L1_SPDWN_EN);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+		       PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
+		       TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN |
+		       EEE_SPDWN_EN);
+
+	r8153_enable_eee(tp);
+	r8153_enable_aldps(tp);
+	r8152b_enable_fc(tp);
+
+	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
+				       BMCR_ANRESTART);
+}
+
+static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	netif_device_detach(tp->netdev);
+
+	if (netif_running(tp->netdev)) {
+		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
+		cancel_delayed_work_sync(&tp->schedule);
+		tasklet_disable(&tp->tl);
+	}
+
+	tp->rtl_ops.down(tp);
+
+	return 0;
+}
+
+static int rtl8152_resume(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	tp->rtl_ops.init(tp);
+	netif_device_attach(tp->netdev);
+	if (netif_running(tp->netdev)) {
+		rtl8152_set_speed(tp, AUTONEG_ENABLE,
+				tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
+				DUPLEX_FULL);
+		tp->speed = 0;
+		netif_carrier_off(tp->netdev);
+		set_bit(WORK_ENABLE, &tp->flags);
+		usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+		tasklet_enable(&tp->tl);
+	}
+
+	return 0;
+}
+
+static void rtl8152_get_drvinfo(struct net_device *netdev,
+				struct ethtool_drvinfo *info)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	strncpy(info->driver, MODULENAME, ETHTOOL_BUSINFO_LEN);
+	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
+	usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static
+int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (!tp->mii.mdio_read)
+		return -EOPNOTSUPP;
+
+	return mii_ethtool_gset(&tp->mii, cmd);
+}
+
+static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static struct ethtool_ops ops = {
+	.get_drvinfo = rtl8152_get_drvinfo,
+	.get_settings = rtl8152_get_settings,
+	.set_settings = rtl8152_set_settings,
+	.get_link = ethtool_op_get_link,
+};
+
+static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(rq);
+	int res = 0;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = R8152_PHY_ID; /* Internal PHY */
+		break;
+
+	case SIOCGMIIREG:
+		data->val_out = r8152_mdio_read(tp, data->reg_num);
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN)) {
+			res = -EPERM;
+			break;
+		}
+		r8152_mdio_write(tp, data->reg_num, data->val_in);
+		break;
+
+	default:
+		res = -EOPNOTSUPP;
+	}
+
+	return res;
+}
+
+static const struct net_device_ops rtl8152_netdev_ops = {
+	.ndo_open		= rtl8152_open,
+	.ndo_stop		= rtl8152_close,
+	.ndo_do_ioctl		= rtl8152_ioctl,
+	.ndo_start_xmit		= rtl8152_start_xmit,
+	.ndo_tx_timeout		= rtl8152_tx_timeout,
+	.ndo_set_rx_mode	= rtl8152_set_rx_mode,
+	.ndo_set_mac_address	= rtl8152_set_mac_address,
+
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static void r8152b_get_version(struct r8152 *tp)
+{
+	u32	ocp_data;
+	u16	version;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
+	version = (u16)(ocp_data & VERSION_MASK);
+
+	switch (version) {
+	case 0x4c00:
+		tp->version = RTL_VER_01;
+		break;
+	case 0x4c10:
+		tp->version = RTL_VER_02;
+		break;
+	case 0x5c00:
+		tp->version = RTL_VER_03;
+		tp->mii.supports_gmii = 1;
+		break;
+	case 0x5c10:
+		tp->version = RTL_VER_04;
+		tp->mii.supports_gmii = 1;
+		break;
+	case 0x5c20:
+		tp->version = RTL_VER_05;
+		tp->mii.supports_gmii = 1;
+		break;
+	default:
+		netif_info(tp, probe, tp->netdev,
+			   "Unknown version 0x%04x\n", version);
+		break;
+	}
+}
+
+static void rtl8152_unload(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	if (tp->version != RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+		ocp_data |= POWER_CUT;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RESUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+}
+
+static void rtl8153_unload(struct r8152 *tp)
+{
+	r8153_power_cut_en(tp, 1);
+}
+
+static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
+{
+	struct rtl_ops *ops = &tp->rtl_ops;
+	int ret = -ENODEV;
+
+	switch (id->idVendor) {
+	case VENDOR_ID_REALTEK:
+		switch (id->idProduct) {
+		case PRODUCT_ID_RTL8152:
+			ops->init		= r8152b_init;
+			ops->enable		= rtl8152_enable;
+			ops->disable		= rtl8152_disable;
+			ops->down		= rtl8152_down;
+			ops->unload		= rtl8152_unload;
+			ret = 0;
+			break;
+		case PRODUCT_ID_RTL8153:
+			ops->init		= r8153_init;
+			ops->enable		= rtl8153_enable;
+			ops->disable		= rtl8152_disable;
+			ops->down		= rtl8153_down;
+			ops->unload		= rtl8153_unload;
+			ret = 0;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case VENDOR_ID_SAMSUNG:
+		switch (id->idProduct) {
+		case PRODUCT_ID_SAMSUNG:
+			ops->init		= r8153_init;
+			ops->enable		= rtl8153_enable;
+			ops->disable		= rtl8152_disable;
+			ops->down		= rtl8153_down;
+			ops->unload		= rtl8153_unload;
+			ret = 0;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	if (ret)
+		netif_err(tp, probe, tp->netdev, "Unknown Device\n");
+
+	return ret;
+}
+
+static int rtl8152_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct r8152 *tp;
+	struct net_device *netdev;
+	int ret;
+
+	if (udev->actconfig->desc.bConfigurationValue != 1) {
+		usb_driver_set_configuration(udev, 1);
+		return -ENODEV;
+	}
+
+	usb_reset_device(udev);
+	netdev = alloc_etherdev(sizeof(struct r8152));
+	if (!netdev) {
+		dev_err(&intf->dev, "Out of memory\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	tp = netdev_priv(netdev);
+	tp->msg_enable = 0x7FFF;
+
+	tp->udev = udev;
+	tp->netdev = netdev;
+	tp->intf = intf;
+
+	ret = rtl_ops_init(tp, id);
+	if (ret)
+		goto out;
+
+	tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
+	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
+
+	netdev->netdev_ops = &rtl8152_netdev_ops;
+	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
+
+	netdev->features |= NETIF_F_IP_CSUM;
+	netdev->hw_features = NETIF_F_IP_CSUM;
+	SET_ETHTOOL_OPS(netdev, &ops);
+
+	tp->mii.dev = netdev;
+	tp->mii.mdio_read = read_mii_word;
+	tp->mii.mdio_write = write_mii_word;
+	tp->mii.phy_id_mask = 0x3f;
+	tp->mii.reg_num_mask = 0x1f;
+	tp->mii.phy_id = R8152_PHY_ID;
+	tp->mii.supports_gmii = 0;
+
+	r8152b_get_version(tp);
+	tp->rtl_ops.init(tp);
+	set_ethernet_addr(tp);
+
+	ret = alloc_all_mem(tp);
+	if (ret)
+		goto out;
+
+	usb_set_intfdata(intf, tp);
+
+	ret = register_netdev(netdev);
+	if (ret != 0) {
+		netif_err(tp, probe, netdev, "couldn't register the device\n");
+		goto out1;
+	}
+
+	netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
+
+	return 0;
+
+out1:
+	usb_set_intfdata(intf, NULL);
+out:
+	free_netdev(netdev);
+	return ret;
+}
+
+static void rtl8152_disconnect(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (tp) {
+		set_bit(RTL8152_UNPLUG, &tp->flags);
+		tasklet_kill(&tp->tl);
+		unregister_netdev(tp->netdev);
+		tp->rtl_ops.unload(tp);
+		free_all_mem(tp);
+		free_netdev(tp->netdev);
+	}
+}
+
+/* table of devices that work with this driver */
+static struct usb_device_id rtl8152_table[] = {
+	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
+	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)},
+	{USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)},
+	{USB_DEVICE(VENDOR_ID_LENOVO, PRODUCT_ID_LENOVO)},
+	{USB_DEVICE(VENDOR_ID_NVIDIA, PRODUCT_ID_NVIDIA)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8152_table);
+
+static struct usb_driver rtl8152_driver = {
+	.name =		MODULENAME,
+	.id_table =	rtl8152_table,
+	.probe =	rtl8152_probe,
+	.disconnect =	rtl8152_disconnect,
+	.suspend =	rtl8152_suspend,
+	.resume =	rtl8152_resume,
+	.reset_resume =	rtl8152_resume,
+};
+
+module_usb_driver(rtl8152_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/rtl8150.c backports-4.2.6-1/drivers/net/usb/rtl8150.c
--- backports-4.2.6-1.org/drivers/net/usb/rtl8150.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/rtl8150.c	2016-06-28 14:35:18.001973885 +0200
@@ -0,0 +1,949 @@
+/*
+ *  Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
+#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
+#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
+
+#define	IDR			0x0120
+#define	MAR			0x0126
+#define	CR			0x012e
+#define	TCR			0x012f
+#define	RCR			0x0130
+#define	TSR			0x0132
+#define	RSR			0x0133
+#define	CON0			0x0135
+#define	CON1			0x0136
+#define	MSR			0x0137
+#define	PHYADD			0x0138
+#define	PHYDAT			0x0139
+#define	PHYCNT			0x013b
+#define	GPPC			0x013d
+#define	BMCR			0x0140
+#define	BMSR			0x0142
+#define	ANAR			0x0144
+#define	ANLP			0x0146
+#define	AER			0x0148
+#define CSCR			0x014C  /* This one has the link status */
+#define CSCR_LINK_STATUS	(1 << 3)
+
+#define	IDR_EEPROM		0x1202
+
+#define	PHY_READ		0
+#define	PHY_WRITE		0x20
+#define	PHY_GO			0x40
+
+#define	MII_TIMEOUT		10
+#define	INTBUFSIZE		8
+
+#define	RTL8150_REQT_READ	0xc0
+#define	RTL8150_REQT_WRITE	0x40
+#define	RTL8150_REQ_GET_REGS	0x05
+#define	RTL8150_REQ_SET_REGS	0x05
+
+
+/* Transmit status register errors */
+#define TSR_ECOL		(1<<5)
+#define TSR_LCOL		(1<<4)
+#define TSR_LOSS_CRS		(1<<3)
+#define TSR_JBR			(1<<2)
+#define TSR_ERRORS		(TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
+/* Receive status register errors */
+#define RSR_CRC			(1<<2)
+#define RSR_FAE			(1<<1)
+#define RSR_ERRORS		(RSR_CRC | RSR_FAE)
+
+/* Media status register definitions */
+#define MSR_DUPLEX		(1<<4)
+#define MSR_SPEED		(1<<3)
+#define MSR_LINK		(1<<2)
+
+/* Interrupt pipe data */
+#define INT_TSR			0x00
+#define INT_RSR			0x01
+#define INT_MSR			0x02
+#define INT_WAKSR		0x03
+#define INT_TXOK_CNT		0x04
+#define INT_RXLOST_CNT		0x05
+#define INT_CRERR_CNT		0x06
+#define INT_COL_CNT		0x07
+
+
+#define	RTL8150_MTU		1540
+#define	RTL8150_TX_TIMEOUT	(HZ)
+#define	RX_SKB_POOL_SIZE	4
+
+/* rtl8150 flags */
+#define	RTL8150_HW_CRC		0
+#define	RX_REG_SET		1
+#define	RTL8150_UNPLUG		2
+#define	RX_URB_FAIL		3
+
+/* Define these values to match your device */
+#define	VENDOR_ID_REALTEK		0x0bda
+#define	VENDOR_ID_MELCO			0x0411
+#define	VENDOR_ID_MICRONET		0x3980
+#define	VENDOR_ID_LONGSHINE		0x07b8
+#define	VENDOR_ID_OQO			0x1557
+#define	VENDOR_ID_ZYXEL			0x0586
+
+#define PRODUCT_ID_RTL8150		0x8150
+#define	PRODUCT_ID_LUAKTX		0x0012
+#define	PRODUCT_ID_LCS8138TX		0x401a
+#define PRODUCT_ID_SP128AR		0x0003
+#define	PRODUCT_ID_PRESTIGE		0x401a
+
+#undef	EEPROM_WRITE
+
+/* table of devices that work with this driver */
+static struct usb_device_id rtl8150_table[] = {
+	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
+	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
+	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
+	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+	{USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
+	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8150_table);
+
+struct rtl8150 {
+	unsigned long flags;
+	struct usb_device *udev;
+	struct tasklet_struct tl;
+	struct net_device *netdev;
+	struct urb *rx_urb, *tx_urb, *intr_urb;
+	struct sk_buff *tx_skb, *rx_skb;
+	struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
+	spinlock_t rx_pool_lock;
+	struct usb_ctrlrequest dr;
+	int intr_interval;
+	u8 *intr_buff;
+	u8 phy;
+};
+
+typedef struct rtl8150 rtl8150_t;
+
+struct async_req {
+	struct usb_ctrlrequest dr;
+	u16 rx_creg;
+};
+
+static const char driver_name [] = "rtl8150";
+
+/*
+**
+**	device related part of the code
+**
+*/
+static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
+{
+	return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+			       RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
+			       indx, 0, data, size, 500);
+}
+
+static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
+{
+	return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			       RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
+			       indx, 0, data, size, 500);
+}
+
+static void async_set_reg_cb(struct urb *urb)
+{
+	struct async_req *req = (struct async_req *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg)
+{
+	int res = -ENOMEM;
+	struct urb *async_urb;
+	struct async_req *req;
+
+	req = kmalloc(sizeof(struct async_req), GFP_ATOMIC);
+	if (req == NULL)
+		return res;
+	async_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (async_urb == NULL) {
+		kfree(req);
+		return res;
+	}
+	req->rx_creg = cpu_to_le16(reg);
+	req->dr.bRequestType = RTL8150_REQT_WRITE;
+	req->dr.bRequest = RTL8150_REQ_SET_REGS;
+	req->dr.wIndex = 0;
+	req->dr.wValue = cpu_to_le16(indx);
+	req->dr.wLength = cpu_to_le16(size);
+	usb_fill_control_urb(async_urb, dev->udev,
+	                     usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr,
+			     &req->rx_creg, size, async_set_reg_cb, req);
+	res = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (res) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res);
+	}
+	return res;
+}
+
+static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
+{
+	int i;
+	u8 data[3], tmp;
+
+	data[0] = phy;
+	data[1] = data[2] = 0;
+	tmp = indx | PHY_READ | PHY_GO;
+	i = 0;
+
+	set_registers(dev, PHYADD, sizeof(data), data);
+	set_registers(dev, PHYCNT, 1, &tmp);
+	do {
+		get_registers(dev, PHYCNT, 1, data);
+	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
+
+	if (i <= MII_TIMEOUT) {
+		get_registers(dev, PHYDAT, 2, data);
+		*reg = data[0] | (data[1] << 8);
+		return 0;
+	} else
+		return 1;
+}
+
+static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
+{
+	int i;
+	u8 data[3], tmp;
+
+	data[0] = phy;
+	data[1] = reg & 0xff;
+	data[2] = (reg >> 8) & 0xff;
+	tmp = indx | PHY_WRITE | PHY_GO;
+	i = 0;
+
+	set_registers(dev, PHYADD, sizeof(data), data);
+	set_registers(dev, PHYCNT, 1, &tmp);
+	do {
+		get_registers(dev, PHYCNT, 1, data);
+	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
+
+	if (i <= MII_TIMEOUT)
+		return 0;
+	else
+		return 1;
+}
+
+static inline void set_ethernet_addr(rtl8150_t * dev)
+{
+	u8 node_id[6];
+
+	get_registers(dev, IDR, sizeof(node_id), node_id);
+	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
+}
+
+static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct sockaddr *addr = p;
+	rtl8150_t *dev = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	netdev_dbg(netdev, "Setting MAC address to %pM\n", netdev->dev_addr);
+	/* Set the IDR registers. */
+	set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr);
+#ifdef EEPROM_WRITE
+	{
+	int i;
+	u8 cr;
+	/* Get the CR contents. */
+	get_registers(dev, CR, 1, &cr);
+	/* Set the WEPROM bit (eeprom write enable). */
+	cr |= 0x20;
+	set_registers(dev, CR, 1, &cr);
+	/* Write the MAC address into eeprom. Eeprom writes must be word-sized,
+	   so we need to split them up. */
+	for (i = 0; i * 2 < netdev->addr_len; i++) {
+		set_registers(dev, IDR_EEPROM + (i * 2), 2,
+		netdev->dev_addr + (i * 2));
+	}
+	/* Clear the WEPROM bit (preventing accidental eeprom writes). */
+	cr &= 0xdf;
+	set_registers(dev, CR, 1, &cr);
+	}
+#endif
+	return 0;
+}
+
+static int rtl8150_reset(rtl8150_t * dev)
+{
+	u8 data = 0x10;
+	int i = HZ;
+
+	set_registers(dev, CR, 1, &data);
+	do {
+		get_registers(dev, CR, 1, &data);
+	} while ((data & 0x10) && --i);
+
+	return (i > 0) ? 1 : 0;
+}
+
+static int alloc_all_urbs(rtl8150_t * dev)
+{
+	dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->rx_urb)
+		return 0;
+	dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->tx_urb) {
+		usb_free_urb(dev->rx_urb);
+		return 0;
+	}
+	dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->intr_urb) {
+		usb_free_urb(dev->rx_urb);
+		usb_free_urb(dev->tx_urb);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void free_all_urbs(rtl8150_t * dev)
+{
+	usb_free_urb(dev->rx_urb);
+	usb_free_urb(dev->tx_urb);
+	usb_free_urb(dev->intr_urb);
+}
+
+static void unlink_all_urbs(rtl8150_t * dev)
+{
+	usb_kill_urb(dev->rx_urb);
+	usb_kill_urb(dev->tx_urb);
+	usb_kill_urb(dev->intr_urb);
+}
+
+static inline struct sk_buff *pull_skb(rtl8150_t *dev)
+{
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
+		if (dev->rx_skb_pool[i]) {
+			skb = dev->rx_skb_pool[i];
+			dev->rx_skb_pool[i] = NULL;
+			return skb;
+		}
+	}
+	return NULL;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	rtl8150_t *dev;
+	unsigned pkt_len, res;
+	struct sk_buff *skb;
+	struct net_device *netdev;
+	u16 rx_stat;
+	int status = urb->status;
+	int result;
+
+	dev = urb->context;
+	if (!dev)
+		return;
+	if (test_bit(RTL8150_UNPLUG, &dev->flags))
+		return;
+	netdev = dev->netdev;
+	if (!netif_device_present(netdev))
+		return;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+		return;	/* the urb is in unlink state */
+	case -ETIME:
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
+		goto goon;
+	default:
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "Rx status %d\n", status);
+		goto goon;
+	}
+
+	if (!dev->rx_skb)
+		goto resched;
+	/* protect against short packets (tell me why we got some?!?) */
+	if (urb->actual_length < 4)
+		goto goon;
+
+	res = urb->actual_length;
+	rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4));
+	pkt_len = res - 4;
+
+	skb_put(dev->rx_skb, pkt_len);
+	dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
+	netif_rx(dev->rx_skb);
+	netdev->stats.rx_packets++;
+	netdev->stats.rx_bytes += pkt_len;
+
+	spin_lock(&dev->rx_pool_lock);
+	skb = pull_skb(dev);
+	spin_unlock(&dev->rx_pool_lock);
+	if (!skb)
+		goto resched;
+
+	dev->rx_skb = skb;
+goon:
+	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+	result = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (result == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (result) {
+		set_bit(RX_URB_FAIL, &dev->flags);
+		goto resched;
+	} else {
+		clear_bit(RX_URB_FAIL, &dev->flags);
+	}
+
+	return;
+resched:
+	tasklet_schedule(&dev->tl);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	rtl8150_t *dev;
+	int status = urb->status;
+
+	dev = urb->context;
+	if (!dev)
+		return;
+	dev_kfree_skb_irq(dev->tx_skb);
+	if (!netif_device_present(dev->netdev))
+		return;
+	if (status)
+		dev_info(&urb->dev->dev, "%s: Tx status %d\n",
+			 dev->netdev->name, status);
+	dev->netdev->trans_start = jiffies;
+	netif_wake_queue(dev->netdev);
+}
+
+static void intr_callback(struct urb *urb)
+{
+	rtl8150_t *dev;
+	__u8 *d;
+	int status = urb->status;
+	int res;
+
+	dev = urb->context;
+	if (!dev)
+		return;
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:
+		dev_info(&urb->dev->dev, "%s: intr status %d\n",
+			 dev->netdev->name, status);
+		goto resubmit;
+	}
+
+	d = urb->transfer_buffer;
+	if (d[0] & TSR_ERRORS) {
+		dev->netdev->stats.tx_errors++;
+		if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
+			dev->netdev->stats.tx_aborted_errors++;
+		if (d[INT_TSR] & TSR_LCOL)
+			dev->netdev->stats.tx_window_errors++;
+		if (d[INT_TSR] & TSR_LOSS_CRS)
+			dev->netdev->stats.tx_carrier_errors++;
+	}
+	/* Report link status changes to the network stack */
+	if ((d[INT_MSR] & MSR_LINK) == 0) {
+		if (netif_carrier_ok(dev->netdev)) {
+			netif_carrier_off(dev->netdev);
+			netdev_dbg(dev->netdev, "%s: LINK LOST\n", __func__);
+		}
+	} else {
+		if (!netif_carrier_ok(dev->netdev)) {
+			netif_carrier_on(dev->netdev);
+			netdev_dbg(dev->netdev, "%s: LINK CAME BACK\n", __func__);
+		}
+	}
+
+resubmit:
+	res = usb_submit_urb (urb, GFP_ATOMIC);
+	if (res == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (res)
+		dev_err(&dev->udev->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			dev->udev->bus->bus_name, dev->udev->devpath, res);
+}
+
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_detach(dev->netdev);
+
+	if (netif_running(dev->netdev)) {
+		usb_kill_urb(dev->rx_urb);
+		usb_kill_urb(dev->intr_urb);
+	}
+	return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_attach(dev->netdev);
+	if (netif_running(dev->netdev)) {
+		dev->rx_urb->status = 0;
+		dev->rx_urb->actual_length = 0;
+		read_bulk_callback(dev->rx_urb);
+
+		dev->intr_urb->status = 0;
+		dev->intr_urb->actual_length = 0;
+		intr_callback(dev->intr_urb);
+	}
+	return 0;
+}
+
+/*
+**
+**	network related part of the code
+**
+*/
+
+static void fill_skb_pool(rtl8150_t *dev)
+{
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
+		if (dev->rx_skb_pool[i])
+			continue;
+		skb = dev_alloc_skb(RTL8150_MTU + 2);
+		if (!skb) {
+			return;
+		}
+		skb_reserve(skb, 2);
+		dev->rx_skb_pool[i] = skb;
+	}
+}
+
+static void free_skb_pool(rtl8150_t *dev)
+{
+	int i;
+
+	for (i = 0; i < RX_SKB_POOL_SIZE; i++)
+		if (dev->rx_skb_pool[i])
+			dev_kfree_skb(dev->rx_skb_pool[i]);
+}
+
+static void rx_fixup(unsigned long data)
+{
+	struct rtl8150 *dev = (struct rtl8150 *)data;
+	struct sk_buff *skb;
+	int status;
+
+	spin_lock_irq(&dev->rx_pool_lock);
+	fill_skb_pool(dev);
+	spin_unlock_irq(&dev->rx_pool_lock);
+	if (test_bit(RX_URB_FAIL, &dev->flags))
+		if (dev->rx_skb)
+			goto try_again;
+	spin_lock_irq(&dev->rx_pool_lock);
+	skb = pull_skb(dev);
+	spin_unlock_irq(&dev->rx_pool_lock);
+	if (skb == NULL)
+		goto tlsched;
+	dev->rx_skb = skb;
+	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+try_again:
+	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV) {
+		netif_device_detach(dev->netdev);
+	} else if (status) {
+		set_bit(RX_URB_FAIL, &dev->flags);
+		goto tlsched;
+	} else {
+		clear_bit(RX_URB_FAIL, &dev->flags);
+	}
+
+	return;
+tlsched:
+	tasklet_schedule(&dev->tl);
+}
+
+static int enable_net_traffic(rtl8150_t * dev)
+{
+	u8 cr, tcr, rcr, msr;
+
+	if (!rtl8150_reset(dev)) {
+		dev_warn(&dev->udev->dev, "device reset failed\n");
+	}
+	/* RCR bit7=1 attach Rx info at the end;  =0 HW CRC (which is broken) */
+	rcr = 0x9e;
+	tcr = 0xd8;
+	cr = 0x0c;
+	if (!(rcr & 0x80))
+		set_bit(RTL8150_HW_CRC, &dev->flags);
+	set_registers(dev, RCR, 1, &rcr);
+	set_registers(dev, TCR, 1, &tcr);
+	set_registers(dev, CR, 1, &cr);
+	get_registers(dev, MSR, 1, &msr);
+
+	return 0;
+}
+
+static void disable_net_traffic(rtl8150_t * dev)
+{
+	u8 cr;
+
+	get_registers(dev, CR, 1, &cr);
+	cr &= 0xf3;
+	set_registers(dev, CR, 1, &cr);
+}
+
+static void rtl8150_tx_timeout(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	dev_warn(&netdev->dev, "Tx timeout.\n");
+	usb_unlink_urb(dev->tx_urb);
+	netdev->stats.tx_errors++;
+}
+
+static void rtl8150_set_multicast(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	u16 rx_creg = 0x9e;
+
+	netif_stop_queue(netdev);
+	if (netdev->flags & IFF_PROMISC) {
+		rx_creg |= 0x0001;
+		dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
+	} else if (!netdev_mc_empty(netdev) ||
+		   (netdev->flags & IFF_ALLMULTI)) {
+		rx_creg &= 0xfffe;
+		rx_creg |= 0x0002;
+		dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name);
+	} else {
+		/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
+		rx_creg &= 0x00fc;
+	}
+	async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
+	netif_wake_queue(netdev);
+}
+
+static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb,
+					    struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	int count, res;
+
+	netif_stop_queue(netdev);
+	count = (skb->len < 60) ? 60 : skb->len;
+	count = (count & 0x3f) ? count : count + 1;
+	dev->tx_skb = skb;
+	usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
+		      skb->data, count, write_bulk_callback, dev);
+	if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
+		/* Can we get/handle EPIPE here? */
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		else {
+			dev_warn(&netdev->dev, "failed tx_urb %d\n", res);
+			netdev->stats.tx_errors++;
+			netif_start_queue(netdev);
+		}
+	} else {
+		netdev->stats.tx_packets++;
+		netdev->stats.tx_bytes += skb->len;
+		netdev->trans_start = jiffies;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+
+static void set_carrier(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	short tmp;
+
+	get_registers(dev, CSCR, 2, &tmp);
+	if (tmp & CSCR_LINK_STATUS)
+		netif_carrier_on(netdev);
+	else
+		netif_carrier_off(netdev);
+}
+
+static int rtl8150_open(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	int res;
+
+	if (dev->rx_skb == NULL)
+		dev->rx_skb = pull_skb(dev);
+	if (!dev->rx_skb)
+		return -ENOMEM;
+
+	set_registers(dev, IDR, 6, netdev->dev_addr);
+
+	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		dev_warn(&netdev->dev, "rx_urb submit failed: %d\n", res);
+		return res;
+	}
+	usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
+		     dev->intr_buff, INTBUFSIZE, intr_callback,
+		     dev, dev->intr_interval);
+	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		dev_warn(&netdev->dev, "intr_urb submit failed: %d\n", res);
+		usb_kill_urb(dev->rx_urb);
+		return res;
+	}
+	enable_net_traffic(dev);
+	set_carrier(netdev);
+	netif_start_queue(netdev);
+
+	return res;
+}
+
+static int rtl8150_close(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+
+	netif_stop_queue(netdev);
+	if (!test_bit(RTL8150_UNPLUG, &dev->flags))
+		disable_net_traffic(dev);
+	unlink_all_urbs(dev);
+
+	return 0;
+}
+
+static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+
+	strlcpy(info->driver, driver_name, sizeof(info->driver));
+	strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	short lpa, bmcr;
+
+	ecmd->supported = (SUPPORTED_10baseT_Half |
+			  SUPPORTED_10baseT_Full |
+			  SUPPORTED_100baseT_Half |
+			  SUPPORTED_100baseT_Full |
+			  SUPPORTED_Autoneg |
+			  SUPPORTED_TP | SUPPORTED_MII);
+	ecmd->port = PORT_TP;
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->phy_address = dev->phy;
+	get_registers(dev, BMCR, 2, &bmcr);
+	get_registers(dev, ANLP, 2, &lpa);
+	if (bmcr & BMCR_ANENABLE) {
+		u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
+			     SPEED_100 : SPEED_10);
+		ethtool_cmd_speed_set(ecmd, speed);
+		ecmd->autoneg = AUTONEG_ENABLE;
+		if (speed == SPEED_100)
+			ecmd->duplex = (lpa & LPA_100FULL) ?
+			    DUPLEX_FULL : DUPLEX_HALF;
+		else
+			ecmd->duplex = (lpa & LPA_10FULL) ?
+			    DUPLEX_FULL : DUPLEX_HALF;
+	} else {
+		ecmd->autoneg = AUTONEG_DISABLE;
+		ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
+					     SPEED_100 : SPEED_10));
+		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
+		    DUPLEX_FULL : DUPLEX_HALF;
+	}
+	return 0;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = rtl8150_get_drvinfo,
+	.get_settings = rtl8150_get_settings,
+	.get_link = ethtool_op_get_link
+};
+
+static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	u16 *data = (u16 *) & rq->ifr_ifru;
+	int res = 0;
+
+	switch (cmd) {
+	case SIOCDEVPRIVATE:
+		data[0] = dev->phy;
+	case SIOCDEVPRIVATE + 1:
+		read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
+		break;
+	case SIOCDEVPRIVATE + 2:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
+		break;
+	default:
+		res = -EOPNOTSUPP;
+	}
+
+	return res;
+}
+
+static const struct net_device_ops rtl8150_netdev_ops = {
+	.ndo_open		= rtl8150_open,
+	.ndo_stop		= rtl8150_close,
+	.ndo_do_ioctl		= rtl8150_ioctl,
+	.ndo_start_xmit		= rtl8150_start_xmit,
+	.ndo_tx_timeout		= rtl8150_tx_timeout,
+	.ndo_set_rx_mode	= rtl8150_set_multicast,
+	.ndo_set_mac_address	= rtl8150_set_mac_address,
+
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int rtl8150_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	rtl8150_t *dev;
+	struct net_device *netdev;
+
+	netdev = alloc_etherdev(sizeof(rtl8150_t));
+	if (!netdev)
+		return -ENOMEM;
+
+	dev = netdev_priv(netdev);
+
+	dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+	if (!dev->intr_buff) {
+		free_netdev(netdev);
+		return -ENOMEM;
+	}
+
+	tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev);
+	spin_lock_init(&dev->rx_pool_lock);
+
+	dev->udev = udev;
+	dev->netdev = netdev;
+	netdev->netdev_ops = &rtl8150_netdev_ops;
+	netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
+	netdev->ethtool_ops = &ops;
+	dev->intr_interval = 100;	/* 100ms */
+
+	if (!alloc_all_urbs(dev)) {
+		dev_err(&intf->dev, "out of memory\n");
+		goto out;
+	}
+	if (!rtl8150_reset(dev)) {
+		dev_err(&intf->dev, "couldn't reset the device\n");
+		goto out1;
+	}
+	fill_skb_pool(dev);
+	set_ethernet_addr(dev);
+
+	usb_set_intfdata(intf, dev);
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	if (register_netdev(netdev) != 0) {
+		dev_err(&intf->dev, "couldn't register the device\n");
+		goto out2;
+	}
+
+	dev_info(&intf->dev, "%s: rtl8150 is detected\n", netdev->name);
+
+	return 0;
+
+out2:
+	usb_set_intfdata(intf, NULL);
+	free_skb_pool(dev);
+out1:
+	free_all_urbs(dev);
+out:
+	kfree(dev->intr_buff);
+	free_netdev(netdev);
+	return -EIO;
+}
+
+static void rtl8150_disconnect(struct usb_interface *intf)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (dev) {
+		set_bit(RTL8150_UNPLUG, &dev->flags);
+		tasklet_kill(&dev->tl);
+		unregister_netdev(dev->netdev);
+		unlink_all_urbs(dev);
+		free_all_urbs(dev);
+		free_skb_pool(dev);
+		if (dev->rx_skb)
+			dev_kfree_skb(dev->rx_skb);
+		kfree(dev->intr_buff);
+		free_netdev(dev->netdev);
+	}
+}
+
+static struct usb_driver rtl8150_driver = {
+	.name		= driver_name,
+	.probe		= rtl8150_probe,
+	.disconnect	= rtl8150_disconnect,
+	.id_table	= rtl8150_table,
+	.suspend	= rtl8150_suspend,
+	.resume		= rtl8150_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(rtl8150_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/smsc75xx.c backports-4.2.6-1/drivers/net/usb/smsc75xx.c
--- backports-4.2.6-1.org/drivers/net/usb/smsc75xx.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/smsc75xx.c	2016-06-28 14:35:18.008640551 +0200
@@ -0,0 +1,2286 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/bitrev.h>
+#include <linux/crc16.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include "smsc75xx.h"
+
+#define SMSC_CHIPNAME			"smsc75xx"
+#define SMSC_DRIVER_VERSION		"1.0.0"
+#define HS_USB_PKT_SIZE			(512)
+#define FS_USB_PKT_SIZE			(64)
+#define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY		(0x00002000)
+#define MAX_SINGLE_PACKET_SIZE		(9000)
+#define LAN75XX_EEPROM_MAGIC		(0x7500)
+#define EEPROM_MAC_OFFSET		(0x01)
+#define DEFAULT_TX_CSUM_ENABLE		(true)
+#define DEFAULT_RX_CSUM_ENABLE		(true)
+#define SMSC75XX_INTERNAL_PHY_ID	(1)
+#define SMSC75XX_TX_OVERHEAD		(8)
+#define MAX_RX_FIFO_SIZE		(20 * 1024)
+#define MAX_TX_FIFO_SIZE		(12 * 1024)
+#define USB_VENDOR_ID_SMSC		(0x0424)
+#define USB_PRODUCT_ID_LAN7500		(0x7500)
+#define USB_PRODUCT_ID_LAN7505		(0x7505)
+#define RXW_PADDING			2
+#define SUPPORTED_WAKE			(WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
+					 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
+
+#define SUSPEND_SUSPEND0		(0x01)
+#define SUSPEND_SUSPEND1		(0x02)
+#define SUSPEND_SUSPEND2		(0x04)
+#define SUSPEND_SUSPEND3		(0x08)
+#define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+
+struct smsc75xx_priv {
+	struct usbnet *dev;
+	u32 rfe_ctl;
+	u32 wolopts;
+	u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
+	struct mutex dataport_mutex;
+	spinlock_t rfe_ctl_lock;
+	struct work_struct set_multicast;
+	u8 suspend_flags;
+};
+
+struct usb_context {
+	struct usb_ctrlrequest req;
+	struct usbnet *dev;
+};
+
+static bool turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check __smsc75xx_read_reg(struct usbnet *dev, u32 index,
+					    u32 *data, int in_pm)
+{
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+			    index, ret);
+
+	le32_to_cpus(&buf);
+	*data = buf;
+
+	return ret;
+}
+
+static int __must_check __smsc75xx_write_reg(struct usbnet *dev, u32 index,
+					     u32 data, int in_pm)
+{
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	buf = data;
+	cpu_to_le32s(&buf);
+
+	ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static int __must_check smsc75xx_read_reg_nopm(struct usbnet *dev, u32 index,
+					       u32 *data)
+{
+	return __smsc75xx_read_reg(dev, index, data, 1);
+}
+
+static int __must_check smsc75xx_write_reg_nopm(struct usbnet *dev, u32 index,
+						u32 data)
+{
+	return __smsc75xx_write_reg(dev, index, data, 1);
+}
+
+static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
+					  u32 *data)
+{
+	return __smsc75xx_read_reg(dev, index, data, 0);
+}
+
+static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
+					   u32 data)
+{
+	return __smsc75xx_write_reg(dev, index, data, 0);
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static __must_check int __smsc75xx_phy_wait_not_busy(struct usbnet *dev,
+						     int in_pm)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = __smsc75xx_read_reg(dev, MII_ACCESS, &val, in_pm);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading MII_ACCESS\n");
+			return ret;
+		}
+
+		if (!(val & MII_ACCESS_BUSY))
+			return 0;
+	} while (!time_after(jiffies, start_time + HZ));
+
+	return -EIO;
+}
+
+static int __smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
+				int in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_read\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (read from PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+		| MII_ACCESS_READ | MII_ACCESS_BUSY;
+	ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_ACCESS\n");
+		goto done;
+	}
+
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
+		goto done;
+	}
+
+	ret = __smsc75xx_read_reg(dev, MII_DATA, &val, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_DATA\n");
+		goto done;
+	}
+
+	ret = (u16)(val & 0xFFFF);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static void __smsc75xx_mdio_write(struct net_device *netdev, int phy_id,
+				  int idx, int regval, int in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_write\n");
+		goto done;
+	}
+
+	val = regval;
+	ret = __smsc75xx_write_reg(dev, MII_DATA, val, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_DATA\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (write to PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+		| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
+	ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_ACCESS\n");
+		goto done;
+	}
+
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
+		goto done;
+	}
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc75xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
+				   int idx)
+{
+	return __smsc75xx_mdio_read(netdev, phy_id, idx, 1);
+}
+
+static void smsc75xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
+				     int idx, int regval)
+{
+	__smsc75xx_mdio_write(netdev, phy_id, idx, regval, 1);
+}
+
+static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+	return __smsc75xx_mdio_read(netdev, phy_id, idx, 0);
+}
+
+static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+				int regval)
+{
+	__smsc75xx_mdio_write(netdev, phy_id, idx, regval, 0);
+}
+
+static int smsc75xx_wait_eeprom(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
+			break;
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
+		netdev_warn(dev->net, "EEPROM read operation timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY))
+			return 0;
+
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	netdev_warn(dev->net, "EEPROM is busy\n");
+	return -EIO;
+}
+
+static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc75xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+		val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
+		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc75xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_DATA\n");
+			return ret;
+		}
+
+		data[i] = val & 0xFF;
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				 u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc75xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	/* Issue write/erase enable command */
+	val = E2P_CMD_BUSY | E2P_CMD_EWEN;
+	ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing E2P_CMD\n");
+		return ret;
+	}
+
+	ret = smsc75xx_wait_eeprom(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+
+		/* Fill data register */
+		val = data[i];
+		ret = smsc75xx_write_reg(dev, E2P_DATA, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_DATA\n");
+			return ret;
+		}
+
+		/* Send "write" command */
+		val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
+		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc75xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
+{
+	int i, ret;
+
+	for (i = 0; i < 100; i++) {
+		u32 dp_sel;
+		ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading DP_SEL\n");
+			return ret;
+		}
+
+		if (dp_sel & DP_SEL_DPRDY)
+			return 0;
+
+		udelay(40);
+	}
+
+	netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out\n");
+
+	return -EIO;
+}
+
+static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
+				   u32 length, u32 *buf)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 dp_sel;
+	int i, ret;
+
+	mutex_lock(&pdata->dataport_mutex);
+
+	ret = smsc75xx_dataport_wait_not_busy(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "smsc75xx_dataport_write busy on entry\n");
+		goto done;
+	}
+
+	ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading DP_SEL\n");
+		goto done;
+	}
+
+	dp_sel &= ~DP_SEL_RSEL;
+	dp_sel |= ram_select;
+	ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing DP_SEL\n");
+		goto done;
+	}
+
+	for (i = 0; i < length; i++) {
+		ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing DP_ADDR\n");
+			goto done;
+		}
+
+		ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing DP_DATA\n");
+			goto done;
+		}
+
+		ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing DP_CMD\n");
+			goto done;
+		}
+
+		ret = smsc75xx_dataport_wait_not_busy(dev);
+		if (ret < 0) {
+			netdev_warn(dev->net, "smsc75xx_dataport_write timeout\n");
+			goto done;
+		}
+	}
+
+done:
+	mutex_unlock(&pdata->dataport_mutex);
+	return ret;
+}
+
+/* returns hash bit number for given MAC address */
+static u32 smsc75xx_hash(char addr[ETH_ALEN])
+{
+	return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
+}
+
+static void smsc75xx_deferred_multicast_write(struct work_struct *param)
+{
+	struct smsc75xx_priv *pdata =
+		container_of(param, struct smsc75xx_priv, set_multicast);
+	struct usbnet *dev = pdata->dev;
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n",
+		  pdata->rfe_ctl);
+
+	smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
+		DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error writing RFE_CRL\n");
+}
+
+static void smsc75xx_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	pdata->rfe_ctl &=
+		~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
+	pdata->rfe_ctl |= RFE_CTL_AB;
+
+	for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
+		pdata->multicast_hash_table[i] = 0;
+
+	if (dev->net->flags & IFF_PROMISC) {
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
+		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
+	} else if (dev->net->flags & IFF_ALLMULTI) {
+		netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
+		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
+	} else if (!netdev_mc_empty(dev->net)) {
+		struct netdev_hw_addr *ha;
+
+		netif_dbg(dev, drv, dev->net, "receive multicast hash filter\n");
+
+		pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 bitnum = smsc75xx_hash(ha->addr);
+			pdata->multicast_hash_table[bitnum / 32] |=
+				(1 << (bitnum % 32));
+		}
+	} else {
+		netif_dbg(dev, drv, dev->net, "receive own packets only\n");
+		pdata->rfe_ctl |= RFE_CTL_DPF;
+	}
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+	/* defer register writes to a sleepable context */
+	schedule_work(&pdata->set_multicast);
+}
+
+static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
+					    u16 lcladv, u16 rmtadv)
+{
+	u32 flow = 0, fct_flow = 0;
+	int ret;
+
+	if (duplex == DUPLEX_FULL) {
+		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+		if (cap & FLOW_CTRL_TX) {
+			flow = (FLOW_TX_FCEN | 0xFFFF);
+			/* set fct_flow thresholds to 20% and 80% */
+			fct_flow = (8 << 8) | 32;
+		}
+
+		if (cap & FLOW_CTRL_RX)
+			flow |= FLOW_RX_FCEN;
+
+		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
+			  (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+			  (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+	} else {
+		netif_dbg(dev, link, dev->net, "half duplex\n");
+	}
+
+	ret = smsc75xx_write_reg(dev, FLOW, flow);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing FLOW\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing FCT_FLOW\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_link_reset(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	u16 lcladv, rmtadv;
+	int ret;
+
+	/* write to clear phy interrupt status */
+	smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC,
+		PHY_INT_SRC_CLEAR_ALL);
+
+	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing INT_STS\n");
+		return ret;
+	}
+
+	mii_check_media(mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
+	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
+
+	netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+		  ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
+
+	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
+}
+
+static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
+{
+	u32 intdata;
+
+	if (urb->actual_length != 4) {
+		netdev_warn(dev->net, "unexpected urb length %d\n",
+			    urb->actual_length);
+		return;
+	}
+
+	memcpy(&intdata, urb->transfer_buffer, 4);
+	le32_to_cpus(&intdata);
+
+	netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
+
+	if (intdata & INT_ENP_PHY_INT)
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+	else
+		netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+			    intdata);
+}
+
+static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+	return MAX_EEPROM_SIZE;
+}
+
+static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	ee->magic = LAN75XX_EEPROM_MAGIC;
+
+	return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (ee->magic != LAN75XX_EEPROM_MAGIC) {
+		netdev_warn(dev->net, "EEPROM: magic value mismatch: 0x%x\n",
+			    ee->magic);
+		return -EINVAL;
+	}
+
+	return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static void smsc75xx_ethtool_get_wol(struct net_device *net,
+				     struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+	wolinfo->supported = SUPPORTED_WAKE;
+	wolinfo->wolopts = pdata->wolopts;
+}
+
+static int smsc75xx_ethtool_set_wol(struct net_device *net,
+				    struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	int ret;
+
+	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
+
+	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
+	if (ret < 0)
+		netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
+
+	return ret;
+}
+
+static const struct ethtool_ops smsc75xx_ethtool_ops = {
+	.get_link	= usbnet_get_link,
+	.nway_reset	= usbnet_nway_reset,
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.get_eeprom_len	= smsc75xx_ethtool_get_eeprom_len,
+	.get_eeprom	= smsc75xx_ethtool_get_eeprom,
+	.set_eeprom	= smsc75xx_ethtool_set_eeprom,
+	.get_wol	= smsc75xx_ethtool_get_wol,
+	.set_wol	= smsc75xx_ethtool_set_wol,
+};
+
+static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void smsc75xx_init_mac_address(struct usbnet *dev)
+{
+	/* try reading mac address from EEPROM */
+	if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+			dev->net->dev_addr) == 0) {
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from EEPROM\n");
+			return;
+		}
+	}
+
+	/* no eeprom, or eeprom values are invalid. generate random MAC */
+	eth_hw_addr_random(dev->net);
+	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
+}
+
+static int smsc75xx_set_mac_address(struct usbnet *dev)
+{
+	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+
+	int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write RX_ADDRH: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write RX_ADDRL: %d\n", ret);
+		return ret;
+	}
+
+	addr_hi |= ADDR_FILTX_FB_VALID;
+	ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write ADDR_FILTX: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
+	if (ret < 0)
+		netdev_warn(dev->net, "Failed to write ADDR_FILTX+4: %d\n", ret);
+
+	return ret;
+}
+
+static int smsc75xx_phy_initialize(struct usbnet *dev)
+{
+	int bmcr, ret, timeout = 0;
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = smsc75xx_mdio_read;
+	dev->mii.mdio_write = smsc75xx_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.supports_gmii = 1;
+	dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
+
+	/* reset phy and wait for reset to complete */
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+	do {
+		msleep(10);
+		bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+		if (bmcr < 0) {
+			netdev_warn(dev->net, "Error reading MII_BMCR\n");
+			return bmcr;
+		}
+		timeout++;
+	} while ((bmcr & BMCR_RESET) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on PHY Reset\n");
+		return -EIO;
+	}
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+		ADVERTISE_PAUSE_ASYM);
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+		ADVERTISE_1000FULL);
+
+	/* read and write to clear phy interrupt status */
+	ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PHY_INT_SRC\n");
+		return ret;
+	}
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
+		PHY_INT_MASK_DEFAULT);
+	mii_nway_restart(&dev->mii);
+
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
+	return 0;
+}
+
+static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
+{
+	int ret = 0;
+	u32 buf;
+	bool rxenabled;
+
+	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	rxenabled = ((buf & MAC_RX_RXEN) != 0);
+
+	if (rxenabled) {
+		buf &= ~MAC_RX_RXEN;
+		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* add 4 to size for FCS */
+	buf &= ~MAC_RX_MAX_SIZE;
+	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
+
+	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	if (rxenabled) {
+		buf |= MAC_RX_RXEN;
+		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	int ret;
+
+	if (new_mtu > MAX_SINGLE_PACKET_SIZE)
+		return -EINVAL;
+
+	ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set mac rx frame length\n");
+		return ret;
+	}
+
+	return usbnet_change_mtu(netdev, new_mtu);
+}
+
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_features(struct net_device *netdev,
+	netdev_features_t features)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	if (features & NETIF_F_RXCSUM)
+		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+	else
+		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+	/* it's racing here! */
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error writing RFE_CTL\n");
+
+	return ret;
+}
+
+static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm)
+{
+	int timeout = 0;
+
+	do {
+		u32 buf;
+		int ret;
+
+		ret = __smsc75xx_read_reg(dev, PMT_CTL, &buf, in_pm);
+
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+			return ret;
+		}
+
+		if (buf & PMT_CTL_DEV_RDY)
+			return 0;
+
+		msleep(10);
+		timeout++;
+	} while (timeout < 100);
+
+	netdev_warn(dev->net, "timeout waiting for device ready\n");
+	return -EIO;
+}
+
+static int smsc75xx_reset(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 buf;
+	int ret = 0, timeout;
+
+	netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset\n");
+
+	ret = smsc75xx_wait_ready(dev, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "device not ready in smsc75xx_reset\n");
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	buf |= HW_CFG_LRST;
+
+	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+			return ret;
+		}
+		timeout++;
+	} while ((buf & HW_CFG_LRST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on completion of Lite Reset\n");
+		return -EIO;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY\n");
+
+	ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= PMT_CTL_PHY_RST;
+
+	ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret);
+		return ret;
+	}
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+			return ret;
+		}
+		timeout++;
+	} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
+		return -EIO;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "PHY reset complete\n");
+
+	ret = smsc75xx_set_mac_address(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set mac address\n");
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+		  dev->net->dev_addr);
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+		  buf);
+
+	buf |= HW_CFG_BIR;
+
+	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net,  "Failed to write HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
+		  buf);
+
+	if (!turbo_mode) {
+		buf = 0;
+		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+	} else if (dev->udev->speed == USB_SPEED_HIGH) {
+		buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+	} else {
+		buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+		  (ulong)dev->rx_urb_size);
+
+	ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BURST_CAP after writing: 0x%08x\n", buf);
+
+	ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write BULK_IN_DLY: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf);
+
+	if (turbo_mode) {
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+			return ret;
+		}
+
+		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
+
+		buf |= (HW_CFG_MEF | HW_CFG_BCE);
+
+		ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret);
+			return ret;
+		}
+
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+			return ret;
+		}
+
+		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
+	}
+
+	/* set FIFO sizes */
+	buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+	ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_RX_FIFO_END: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x\n", buf);
+
+	buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+	ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_TX_FIFO_END: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x\n", buf);
+
+	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write INT_STS: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, ID_REV, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", buf);
+
+	ret = smsc75xx_read_reg(dev, E2P_CMD, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read E2P_CMD: %d\n", ret);
+		return ret;
+	}
+
+	/* only set default GPIO/LED settings if no EEPROM is detected */
+	if (!(buf & E2P_CMD_LOADED)) {
+		ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read LED_GPIO_CFG: %d\n", ret);
+			return ret;
+		}
+
+		buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
+		buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+
+		ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write LED_GPIO_CFG: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = smsc75xx_write_reg(dev, FLOW, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_FLOW: %d\n", ret);
+		return ret;
+	}
+
+	/* Don't need rfe_ctl_lock during initialisation */
+	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret);
+		return ret;
+	}
+
+	pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write RFE_CTL: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x\n",
+		  pdata->rfe_ctl);
+
+	/* Enable or disable checksum offload engines */
+	smsc75xx_set_features(dev->net, dev->net->features);
+
+	smsc75xx_set_multicast(dev->net);
+
+	ret = smsc75xx_phy_initialize(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to initialize PHY: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret);
+		return ret;
+	}
+
+	/* enable PHY interrupts */
+	buf |= INT_ENP_PHY_INT;
+
+	ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret);
+		return ret;
+	}
+
+	/* allow mac to detect speed and duplex from phy */
+	ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret);
+		return ret;
+	}
+
+	buf |= (MAC_CR_ADD | MAC_CR_ASD);
+	ret = smsc75xx_write_reg(dev, MAC_CR, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_CR: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_TX: %d\n", ret);
+		return ret;
+	}
+
+	buf |= MAC_TX_TXEN;
+
+	ret = smsc75xx_write_reg(dev, MAC_TX, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_TX: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x\n", buf);
+
+	ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read FCT_TX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= FCT_TX_CTL_EN;
+
+	ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_TX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
+
+	ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set max rx frame length\n");
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	buf |= MAC_RX_RXEN;
+
+	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x\n", buf);
+
+	ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read FCT_RX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= FCT_RX_CTL_EN;
+
+	ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_RX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x\n", buf);
+
+	netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0\n");
+	return 0;
+}
+
+static const struct net_device_ops smsc75xx_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= smsc75xx_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl 		= smsc75xx_ioctl,
+	.ndo_set_rx_mode	= smsc75xx_set_multicast,
+	.ndo_set_features	= smsc75xx_set_features,
+};
+
+static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc75xx_priv *pdata = NULL;
+	int ret;
+
+	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
+		return ret;
+	}
+
+	dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
+					      GFP_KERNEL);
+
+	pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->dev = dev;
+
+	spin_lock_init(&pdata->rfe_ctl_lock);
+	mutex_init(&pdata->dataport_mutex);
+
+	INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
+
+	if (DEFAULT_TX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
+
+	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+				NETIF_F_RXCSUM;
+
+	ret = smsc75xx_wait_ready(dev, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
+		return ret;
+	}
+
+	smsc75xx_init_mac_address(dev);
+
+	/* Init all registers */
+	ret = smsc75xx_reset(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
+		return ret;
+	}
+
+	dev->net->netdev_ops = &smsc75xx_netdev_ops;
+	dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
+	dev->net->flags |= IFF_MULTICAST;
+	dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	return 0;
+}
+
+static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	if (pdata) {
+		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
+		kfree(pdata);
+		pdata = NULL;
+		dev->data[0] = 0;
+	}
+}
+
+static u16 smsc_crc(const u8 *buffer, size_t len)
+{
+	return bitrev16(crc16(0xFFFF, buffer, len));
+}
+
+static int smsc75xx_write_wuff(struct usbnet *dev, int filter, u32 wuf_cfg,
+			       u32 wuf_mask1)
+{
+	int cfg_base = WUF_CFGX + filter * 4;
+	int mask_base = WUF_MASKX + filter * 16;
+	int ret;
+
+	ret = smsc75xx_write_reg(dev, cfg_base, wuf_cfg);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_CFGX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base, wuf_mask1);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base + 4, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base + 8, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base + 12, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend0(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= (~(PMT_CTL_SUS_MODE | PMT_CTL_PHY_RST));
+	val |= PMT_CTL_SUS_MODE_0 | PMT_CTL_WOL_EN | PMT_CTL_WUPS;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND0;
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend1(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+	val |= PMT_CTL_SUS_MODE_1;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	/* clear wol status, enable energy detection */
+	val &= ~PMT_CTL_WUPS;
+	val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND1;
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend2(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+	val |= PMT_CTL_SUS_MODE_2;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND2;
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend3(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, FCT_RX_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading FCT_RX_CTL\n");
+		return ret;
+	}
+
+	if (val & FCT_RX_CTL_RXUSED) {
+		netdev_dbg(dev->net, "rx fifo not empty in autosuspend\n");
+		return -EBUSY;
+	}
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+	val |= PMT_CTL_SUS_MODE_3 | PMT_CTL_RES_CLR_WKP_EN;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	/* clear wol status */
+	val &= ~PMT_CTL_WUPS;
+	val |= PMT_CTL_WUPS_WOL;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND3;
+
+	return 0;
+}
+
+static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret;
+
+	netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
+
+	/* read to clear */
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PHY_INT_SRC\n");
+		return ret;
+	}
+
+	/* enable interrupt source */
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PHY_INT_MASK\n");
+		return ret;
+	}
+
+	ret |= mask;
+
+	smsc75xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
+
+	return 0;
+}
+
+static int smsc75xx_link_ok_nopm(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret;
+
+	/* first, a dummy read, needed to latch some MII phys */
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_BMSR\n");
+		return ret;
+	}
+
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_BMSR\n");
+		return ret;
+	}
+
+	return !!(ret & BMSR_LSTATUS);
+}
+
+static int smsc75xx_autosuspend(struct usbnet *dev, u32 link_up)
+{
+	int ret;
+
+	if (!netif_running(dev->net)) {
+		/* interface is ifconfig down so fully power down hw */
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
+		return smsc75xx_enter_suspend2(dev);
+	}
+
+	if (!link_up) {
+		/* link is down so enter EDPD mode */
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
+
+		/* enable PHY wakeup events for if cable is attached */
+		ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+			PHY_INT_MASK_ANEG_COMP);
+		if (ret < 0) {
+			netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+			return ret;
+		}
+
+		netdev_info(dev->net, "entering SUSPEND1 mode\n");
+		return smsc75xx_enter_suspend1(dev);
+	}
+
+	/* enable PHY wakeup events so we remote wakeup if cable is pulled */
+	ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+		PHY_INT_MASK_LINK_DOWN);
+	if (ret < 0) {
+		netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+		return ret;
+	}
+
+	netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
+	return smsc75xx_enter_suspend3(dev);
+}
+
+static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val, link_up;
+	int ret;
+
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_suspend error\n");
+		return ret;
+	}
+
+	if (pdata->suspend_flags) {
+		netdev_warn(dev->net, "error during last resume\n");
+		pdata->suspend_flags = 0;
+	}
+
+	/* determine if link is up using only _nopm functions */
+	link_up = smsc75xx_link_ok_nopm(dev);
+
+	if (message.event == PM_EVENT_AUTO_SUSPEND) {
+		ret = smsc75xx_autosuspend(dev, link_up);
+		goto done;
+	}
+
+	/* if we get this far we're not autosuspending */
+	/* if no wol options set, or if link is down and we're not waking on
+	 * PHY activity, enter lowest power SUSPEND2 mode
+	 */
+	if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+		!(link_up || (pdata->wolopts & WAKE_PHY))) {
+		netdev_info(dev->net, "entering SUSPEND2 mode\n");
+
+		/* disable energy detect (link up) & wake up events */
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val &= ~(WUCSR_MPEN | WUCSR_WUEN);
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			goto done;
+		}
+
+		val &= ~(PMT_CTL_ED_EN | PMT_CTL_WOL_EN);
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			goto done;
+		}
+
+		ret = smsc75xx_enter_suspend2(dev);
+		goto done;
+	}
+
+	if (pdata->wolopts & WAKE_PHY) {
+		ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+			(PHY_INT_MASK_ANEG_COMP | PHY_INT_MASK_LINK_DOWN));
+		if (ret < 0) {
+			netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+			goto done;
+		}
+
+		/* if link is down then configure EDPD and enter SUSPEND1,
+		 * otherwise enter SUSPEND0 below
+		 */
+		if (!link_up) {
+			struct mii_if_info *mii = &dev->mii;
+			netdev_info(dev->net, "entering SUSPEND1 mode\n");
+
+			/* enable energy detect power-down mode */
+			ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id,
+				PHY_MODE_CTRL_STS);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error reading PHY_MODE_CTRL_STS\n");
+				goto done;
+			}
+
+			ret |= MODE_CTRL_STS_EDPWRDOWN;
+
+			smsc75xx_mdio_write_nopm(dev->net, mii->phy_id,
+				PHY_MODE_CTRL_STS, ret);
+
+			/* enter SUSPEND1 mode */
+			ret = smsc75xx_enter_suspend1(dev);
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & (WAKE_MCAST | WAKE_ARP)) {
+		int i, filter = 0;
+
+		/* disable all filters */
+		for (i = 0; i < WUF_NUM; i++) {
+			ret = smsc75xx_write_reg_nopm(dev, WUF_CFGX + i * 4, 0);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error writing WUF_CFGX\n");
+				goto done;
+			}
+		}
+
+		if (pdata->wolopts & WAKE_MCAST) {
+			const u8 mcast[] = {0x01, 0x00, 0x5E};
+			netdev_info(dev->net, "enabling multicast detection\n");
+
+			val = WUF_CFGX_EN | WUF_CFGX_ATYPE_MULTICAST
+				| smsc_crc(mcast, 3);
+			ret = smsc75xx_write_wuff(dev, filter++, val, 0x0007);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error writing wakeup filter\n");
+				goto done;
+			}
+		}
+
+		if (pdata->wolopts & WAKE_ARP) {
+			const u8 arp[] = {0x08, 0x06};
+			netdev_info(dev->net, "enabling ARP detection\n");
+
+			val = WUF_CFGX_EN | WUF_CFGX_ATYPE_ALL | (0x0C << 16)
+				| smsc_crc(arp, 2);
+			ret = smsc75xx_write_wuff(dev, filter++, val, 0x0003);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error writing wakeup filter\n");
+				goto done;
+			}
+		}
+
+		/* clear any pending pattern match packet status */
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_WUFR;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+
+		netdev_info(dev->net, "enabling packet match detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_WUEN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	} else {
+		netdev_info(dev->net, "disabling packet match detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val &= ~WUCSR_WUEN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	/* disable magic, bcast & unicast wakeup sources */
+	ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading WUCSR\n");
+		goto done;
+	}
+
+	val &= ~(WUCSR_MPEN | WUCSR_BCST_EN | WUCSR_PFDA_EN);
+
+	ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUCSR\n");
+		goto done;
+	}
+
+	if (pdata->wolopts & WAKE_PHY) {
+		netdev_info(dev->net, "enabling PHY wakeup\n");
+
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			goto done;
+		}
+
+		/* clear wol status, enable energy detection */
+		val &= ~PMT_CTL_WUPS;
+		val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & WAKE_MAGIC) {
+		netdev_info(dev->net, "enabling magic packet wakeup\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		/* clear any pending magic packet status */
+		val |= WUCSR_MPR | WUCSR_MPEN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & WAKE_BCAST) {
+		netdev_info(dev->net, "enabling broadcast detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_BCAST_FR | WUCSR_BCST_EN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & WAKE_UCAST) {
+		netdev_info(dev->net, "enabling unicast detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_WUFR | WUCSR_PFDA_EN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	/* enable receiver to enable frame reception */
+	ret = smsc75xx_read_reg_nopm(dev, MAC_RX, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
+		goto done;
+	}
+
+	val |= MAC_RX_RXEN;
+
+	ret = smsc75xx_write_reg_nopm(dev, MAC_RX, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+		goto done;
+	}
+
+	/* some wol options are enabled, so enter SUSPEND0 */
+	netdev_info(dev->net, "entering SUSPEND0 mode\n");
+	ret = smsc75xx_enter_suspend0(dev);
+
+done:
+	/*
+	 * TODO: resume() might need to handle the suspend failure
+	 * in system sleep
+	 */
+	if (ret && PMSG_IS_AUTO(message))
+		usbnet_resume(intf);
+	return ret;
+}
+
+static int smsc75xx_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u8 suspend_flags = pdata->suspend_flags;
+	int ret;
+	u32 val;
+
+	netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
+
+	/* do this first to ensure it's cleared even in error case */
+	pdata->suspend_flags = 0;
+
+	if (suspend_flags & SUSPEND_ALLMODES) {
+		/* Disable wakeup sources */
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			return ret;
+		}
+
+		val &= ~(WUCSR_WUEN | WUCSR_MPEN | WUCSR_PFDA_EN
+			| WUCSR_BCST_EN);
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			return ret;
+		}
+
+		/* clear wake-up status */
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			return ret;
+		}
+
+		val &= ~PMT_CTL_WOL_EN;
+		val |= PMT_CTL_WUPS;
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			return ret;
+		}
+	}
+
+	if (suspend_flags & SUSPEND_SUSPEND2) {
+		netdev_info(dev->net, "resuming from SUSPEND2\n");
+
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			return ret;
+		}
+
+		val |= PMT_CTL_PHY_PWRUP;
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			return ret;
+		}
+	}
+
+	ret = smsc75xx_wait_ready(dev, 1);
+	if (ret < 0) {
+		netdev_warn(dev->net, "device not ready in smsc75xx_resume\n");
+		return ret;
+	}
+
+	return usbnet_resume(intf);
+}
+
+static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
+				     u32 rx_cmd_a, u32 rx_cmd_b)
+{
+	if (!(dev->net->features & NETIF_F_RXCSUM) ||
+	    unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+		skb->ip_summed = CHECKSUM_NONE;
+	} else {
+		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
+		skb->ip_summed = CHECKSUM_COMPLETE;
+	}
+}
+
+static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	while (skb->len > 0) {
+		u32 rx_cmd_a, rx_cmd_b, align_count, size;
+		struct sk_buff *ax_skb;
+		unsigned char *packet;
+
+		memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
+		le32_to_cpus(&rx_cmd_a);
+		skb_pull(skb, 4);
+
+		memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
+		le32_to_cpus(&rx_cmd_b);
+		skb_pull(skb, 4 + RXW_PADDING);
+
+		packet = skb->data;
+
+		/* get the packet length */
+		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
+		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
+
+		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "Error rx_cmd_a=0x%08x\n", rx_cmd_a);
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
+
+			if (rx_cmd_a & RX_CMD_A_FCS)
+				dev->net->stats.rx_crc_errors++;
+			else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
+				dev->net->stats.rx_frame_errors++;
+		} else {
+			/* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err rx_cmd_a=0x%08x\n",
+					  rx_cmd_a);
+				return 0;
+			}
+
+			/* last frame in this batch */
+			if (skb->len == size) {
+				smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
+					rx_cmd_b);
+
+				skb_trim(skb, skb->len - 4); /* remove fcs */
+				skb->truesize = size + sizeof(struct sk_buff);
+
+				return 1;
+			}
+
+			ax_skb = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!ax_skb)) {
+				netdev_warn(dev->net, "Error allocating skb\n");
+				return 0;
+			}
+
+			ax_skb->len = size;
+			ax_skb->data = packet;
+			skb_set_tail_pointer(ax_skb, size);
+
+			smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
+				rx_cmd_b);
+
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+			ax_skb->truesize = size + sizeof(struct sk_buff);
+
+			usbnet_skb_return(dev, ax_skb);
+		}
+
+		skb_pull(skb, size);
+
+		/* padding bytes before the next frame starts */
+		if (skb->len)
+			skb_pull(skb, align_count);
+	}
+
+	if (unlikely(skb->len < 0)) {
+		netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len);
+		return 0;
+	}
+
+	return 1;
+}
+
+static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
+					 struct sk_buff *skb, gfp_t flags)
+{
+	u32 tx_cmd_a, tx_cmd_b;
+
+	if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
+		struct sk_buff *skb2 =
+			skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
+
+	if (skb_is_gso(skb)) {
+		u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
+		tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
+
+		tx_cmd_a |= TX_CMD_A_LSO;
+	} else {
+		tx_cmd_b = 0;
+	}
+
+	skb_push(skb, 4);
+	cpu_to_le32s(&tx_cmd_b);
+	memcpy(skb->data, &tx_cmd_b, 4);
+
+	skb_push(skb, 4);
+	cpu_to_le32s(&tx_cmd_a);
+	memcpy(skb->data, &tx_cmd_a, 4);
+
+	return skb;
+}
+
+static int smsc75xx_manage_power(struct usbnet *dev, int on)
+{
+	dev->intf->needs_remote_wakeup = on;
+	return 0;
+}
+
+static const struct driver_info smsc75xx_info = {
+	.description	= "smsc75xx USB 2.0 Gigabit Ethernet",
+	.bind		= smsc75xx_bind,
+	.unbind		= smsc75xx_unbind,
+	.link_reset	= smsc75xx_link_reset,
+	.reset		= smsc75xx_reset,
+	.rx_fixup	= smsc75xx_rx_fixup,
+	.tx_fixup	= smsc75xx_tx_fixup,
+	.status		= smsc75xx_status,
+	.manage_power	= smsc75xx_manage_power,
+	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		/* SMSC7500 USB Gigabit Ethernet Device */
+		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
+		.driver_info = (unsigned long) &smsc75xx_info,
+	},
+	{
+		/* SMSC7500 USB Gigabit Ethernet Device */
+		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
+		.driver_info = (unsigned long) &smsc75xx_info,
+	},
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc75xx_driver = {
+	.name		= SMSC_CHIPNAME,
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= smsc75xx_suspend,
+	.resume		= smsc75xx_resume,
+	.reset_resume	= smsc75xx_resume,
+	.disconnect	= usbnet_disconnect,
+	.disable_hub_initiated_lpm = 1,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(smsc75xx_driver);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
+MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/smsc75xx.h backports-4.2.6-1/drivers/net/usb/smsc75xx.h
--- backports-4.2.6-1.org/drivers/net/usb/smsc75xx.h	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/smsc75xx.h	2016-06-28 14:35:18.008640551 +0200
@@ -0,0 +1,421 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC75XX_H
+#define _SMSC75XX_H
+
+/* Tx command words */
+#define TX_CMD_A_LSO			(0x08000000)
+#define TX_CMD_A_IPE			(0x04000000)
+#define TX_CMD_A_TPE			(0x02000000)
+#define TX_CMD_A_IVTG			(0x01000000)
+#define TX_CMD_A_RVTG			(0x00800000)
+#define TX_CMD_A_FCS			(0x00400000)
+#define TX_CMD_A_LEN			(0x000FFFFF)
+
+#define TX_CMD_B_MSS			(0x3FFF0000)
+#define TX_CMD_B_MSS_SHIFT		(16)
+#define TX_MSS_MIN			((u16)8)
+#define TX_CMD_B_VTAG			(0x0000FFFF)
+
+/* Rx command words */
+#define RX_CMD_A_ICE			(0x80000000)
+#define RX_CMD_A_TCE			(0x40000000)
+#define RX_CMD_A_IPV			(0x20000000)
+#define RX_CMD_A_PID			(0x18000000)
+#define RX_CMD_A_PID_NIP		(0x00000000)
+#define RX_CMD_A_PID_TCP		(0x08000000)
+#define RX_CMD_A_PID_UDP		(0x10000000)
+#define RX_CMD_A_PID_PP			(0x18000000)
+#define RX_CMD_A_PFF			(0x04000000)
+#define RX_CMD_A_BAM			(0x02000000)
+#define RX_CMD_A_MAM			(0x01000000)
+#define RX_CMD_A_FVTG			(0x00800000)
+#define RX_CMD_A_RED			(0x00400000)
+#define RX_CMD_A_RWT			(0x00200000)
+#define RX_CMD_A_RUNT			(0x00100000)
+#define RX_CMD_A_LONG			(0x00080000)
+#define RX_CMD_A_RXE			(0x00040000)
+#define RX_CMD_A_DRB			(0x00020000)
+#define RX_CMD_A_FCS			(0x00010000)
+#define RX_CMD_A_UAM			(0x00008000)
+#define RX_CMD_A_LCSM			(0x00004000)
+#define RX_CMD_A_LEN			(0x00003FFF)
+
+#define RX_CMD_B_CSUM			(0xFFFF0000)
+#define RX_CMD_B_CSUM_SHIFT		(16)
+#define RX_CMD_B_VTAG			(0x0000FFFF)
+
+/* SCSRs */
+#define ID_REV				(0x0000)
+
+#define FPGA_REV			(0x0004)
+
+#define BOND_CTL			(0x0008)
+
+#define INT_STS				(0x000C)
+#define INT_STS_RDFO_INT		(0x00400000)
+#define INT_STS_TXE_INT			(0x00200000)
+#define INT_STS_MACRTO_INT		(0x00100000)
+#define INT_STS_TX_DIS_INT		(0x00080000)
+#define INT_STS_RX_DIS_INT		(0x00040000)
+#define INT_STS_PHY_INT_		(0x00020000)
+#define INT_STS_MAC_ERR_INT		(0x00008000)
+#define INT_STS_TDFU			(0x00004000)
+#define INT_STS_TDFO			(0x00002000)
+#define INT_STS_GPIOS			(0x00000FFF)
+#define INT_STS_CLEAR_ALL		(0xFFFFFFFF)
+
+#define HW_CFG				(0x0010)
+#define HW_CFG_SMDET_STS		(0x00008000)
+#define HW_CFG_SMDET_EN			(0x00004000)
+#define HW_CFG_EEM			(0x00002000)
+#define HW_CFG_RST_PROTECT		(0x00001000)
+#define HW_CFG_PORT_SWAP		(0x00000800)
+#define HW_CFG_PHY_BOOST		(0x00000600)
+#define HW_CFG_PHY_BOOST_NORMAL		(0x00000000)
+#define HW_CFG_PHY_BOOST_4		(0x00002000)
+#define HW_CFG_PHY_BOOST_8		(0x00004000)
+#define HW_CFG_PHY_BOOST_12		(0x00006000)
+#define HW_CFG_LEDB			(0x00000100)
+#define HW_CFG_BIR			(0x00000080)
+#define HW_CFG_SBP			(0x00000040)
+#define HW_CFG_IME			(0x00000020)
+#define HW_CFG_MEF			(0x00000010)
+#define HW_CFG_ETC			(0x00000008)
+#define HW_CFG_BCE			(0x00000004)
+#define HW_CFG_LRST			(0x00000002)
+#define HW_CFG_SRST			(0x00000001)
+
+#define PMT_CTL				(0x0014)
+#define PMT_CTL_PHY_PWRUP		(0x00000400)
+#define PMT_CTL_RES_CLR_WKP_EN		(0x00000100)
+#define PMT_CTL_DEV_RDY			(0x00000080)
+#define PMT_CTL_SUS_MODE		(0x00000060)
+#define PMT_CTL_SUS_MODE_0		(0x00000000)
+#define PMT_CTL_SUS_MODE_1		(0x00000020)
+#define PMT_CTL_SUS_MODE_2		(0x00000040)
+#define PMT_CTL_SUS_MODE_3		(0x00000060)
+#define PMT_CTL_PHY_RST			(0x00000010)
+#define PMT_CTL_WOL_EN			(0x00000008)
+#define PMT_CTL_ED_EN			(0x00000004)
+#define PMT_CTL_WUPS			(0x00000003)
+#define PMT_CTL_WUPS_NO			(0x00000000)
+#define PMT_CTL_WUPS_ED			(0x00000001)
+#define PMT_CTL_WUPS_WOL		(0x00000002)
+#define PMT_CTL_WUPS_MULTI		(0x00000003)
+
+#define LED_GPIO_CFG			(0x0018)
+#define LED_GPIO_CFG_LED2_FUN_SEL	(0x80000000)
+#define LED_GPIO_CFG_LED10_FUN_SEL	(0x40000000)
+#define LED_GPIO_CFG_LEDGPIO_EN		(0x0000F000)
+#define LED_GPIO_CFG_LEDGPIO_EN_0	(0x00001000)
+#define LED_GPIO_CFG_LEDGPIO_EN_1	(0x00002000)
+#define LED_GPIO_CFG_LEDGPIO_EN_2	(0x00004000)
+#define LED_GPIO_CFG_LEDGPIO_EN_3	(0x00008000)
+#define LED_GPIO_CFG_GPBUF		(0x00000F00)
+#define LED_GPIO_CFG_GPBUF_0		(0x00000100)
+#define LED_GPIO_CFG_GPBUF_1		(0x00000200)
+#define LED_GPIO_CFG_GPBUF_2		(0x00000400)
+#define LED_GPIO_CFG_GPBUF_3		(0x00000800)
+#define LED_GPIO_CFG_GPDIR		(0x000000F0)
+#define LED_GPIO_CFG_GPDIR_0		(0x00000010)
+#define LED_GPIO_CFG_GPDIR_1		(0x00000020)
+#define LED_GPIO_CFG_GPDIR_2		(0x00000040)
+#define LED_GPIO_CFG_GPDIR_3		(0x00000080)
+#define LED_GPIO_CFG_GPDATA		(0x0000000F)
+#define LED_GPIO_CFG_GPDATA_0		(0x00000001)
+#define LED_GPIO_CFG_GPDATA_1		(0x00000002)
+#define LED_GPIO_CFG_GPDATA_2		(0x00000004)
+#define LED_GPIO_CFG_GPDATA_3		(0x00000008)
+
+#define GPIO_CFG			(0x001C)
+#define GPIO_CFG_SHIFT			(24)
+#define GPIO_CFG_GPEN			(0xFF000000)
+#define GPIO_CFG_GPBUF			(0x00FF0000)
+#define GPIO_CFG_GPDIR			(0x0000FF00)
+#define GPIO_CFG_GPDATA			(0x000000FF)
+
+#define GPIO_WAKE			(0x0020)
+#define GPIO_WAKE_PHY_LINKUP_EN		(0x80000000)
+#define GPIO_WAKE_POL			(0x0FFF0000)
+#define GPIO_WAKE_POL_SHIFT		(16)
+#define GPIO_WAKE_WK			(0x00000FFF)
+
+#define DP_SEL				(0x0024)
+#define DP_SEL_DPRDY			(0x80000000)
+#define DP_SEL_RSEL			(0x0000000F)
+#define DP_SEL_URX			(0x00000000)
+#define DP_SEL_VHF			(0x00000001)
+#define DP_SEL_VHF_HASH_LEN		(16)
+#define DP_SEL_VHF_VLAN_LEN		(128)
+#define DP_SEL_LSO_HEAD			(0x00000002)
+#define DP_SEL_FCT_RX			(0x00000003)
+#define DP_SEL_FCT_TX			(0x00000004)
+#define DP_SEL_DESCRIPTOR		(0x00000005)
+#define DP_SEL_WOL			(0x00000006)
+
+#define DP_CMD				(0x0028)
+#define DP_CMD_WRITE			(0x01)
+#define DP_CMD_READ			(0x00)
+
+#define DP_ADDR				(0x002C)
+
+#define DP_DATA				(0x0030)
+
+#define BURST_CAP			(0x0034)
+#define BURST_CAP_MASK			(0x0000000F)
+
+#define INT_EP_CTL			(0x0038)
+#define INT_EP_CTL_INTEP_ON		(0x80000000)
+#define INT_EP_CTL_RDFO_EN		(0x00400000)
+#define INT_EP_CTL_TXE_EN		(0x00200000)
+#define INT_EP_CTL_MACROTO_EN		(0x00100000)
+#define INT_EP_CTL_TX_DIS_EN		(0x00080000)
+#define INT_EP_CTL_RX_DIS_EN		(0x00040000)
+#define INT_EP_CTL_PHY_EN_		(0x00020000)
+#define INT_EP_CTL_MAC_ERR_EN		(0x00008000)
+#define INT_EP_CTL_TDFU_EN		(0x00004000)
+#define INT_EP_CTL_TDFO_EN		(0x00002000)
+#define INT_EP_CTL_RX_FIFO_EN		(0x00001000)
+#define INT_EP_CTL_GPIOX_EN		(0x00000FFF)
+
+#define BULK_IN_DLY			(0x003C)
+#define BULK_IN_DLY_MASK		(0xFFFF)
+
+#define E2P_CMD				(0x0040)
+#define E2P_CMD_BUSY			(0x80000000)
+#define E2P_CMD_MASK			(0x70000000)
+#define E2P_CMD_READ			(0x00000000)
+#define E2P_CMD_EWDS			(0x10000000)
+#define E2P_CMD_EWEN			(0x20000000)
+#define E2P_CMD_WRITE			(0x30000000)
+#define E2P_CMD_WRAL			(0x40000000)
+#define E2P_CMD_ERASE			(0x50000000)
+#define E2P_CMD_ERAL			(0x60000000)
+#define E2P_CMD_RELOAD			(0x70000000)
+#define E2P_CMD_TIMEOUT			(0x00000400)
+#define E2P_CMD_LOADED			(0x00000200)
+#define E2P_CMD_ADDR			(0x000001FF)
+
+#define MAX_EEPROM_SIZE			(512)
+
+#define E2P_DATA			(0x0044)
+#define E2P_DATA_MASK_			(0x000000FF)
+
+#define RFE_CTL				(0x0060)
+#define RFE_CTL_TCPUDP_CKM		(0x00001000)
+#define RFE_CTL_IP_CKM			(0x00000800)
+#define RFE_CTL_AB			(0x00000400)
+#define RFE_CTL_AM			(0x00000200)
+#define RFE_CTL_AU			(0x00000100)
+#define RFE_CTL_VS			(0x00000080)
+#define RFE_CTL_UF			(0x00000040)
+#define RFE_CTL_VF			(0x00000020)
+#define RFE_CTL_SPF			(0x00000010)
+#define RFE_CTL_MHF			(0x00000008)
+#define RFE_CTL_DHF			(0x00000004)
+#define RFE_CTL_DPF			(0x00000002)
+#define RFE_CTL_RST_RF			(0x00000001)
+
+#define VLAN_TYPE			(0x0064)
+#define VLAN_TYPE_MASK			(0x0000FFFF)
+
+#define FCT_RX_CTL			(0x0090)
+#define FCT_RX_CTL_EN			(0x80000000)
+#define FCT_RX_CTL_RST			(0x40000000)
+#define FCT_RX_CTL_SBF			(0x02000000)
+#define FCT_RX_CTL_OVERFLOW		(0x01000000)
+#define FCT_RX_CTL_FRM_DROP		(0x00800000)
+#define FCT_RX_CTL_RX_NOT_EMPTY		(0x00400000)
+#define FCT_RX_CTL_RX_EMPTY		(0x00200000)
+#define FCT_RX_CTL_RX_DISABLED		(0x00100000)
+#define FCT_RX_CTL_RXUSED		(0x0000FFFF)
+
+#define FCT_TX_CTL			(0x0094)
+#define FCT_TX_CTL_EN			(0x80000000)
+#define FCT_TX_CTL_RST			(0x40000000)
+#define FCT_TX_CTL_TX_NOT_EMPTY		(0x00400000)
+#define FCT_TX_CTL_TX_EMPTY		(0x00200000)
+#define FCT_TX_CTL_TX_DISABLED		(0x00100000)
+#define FCT_TX_CTL_TXUSED		(0x0000FFFF)
+
+#define FCT_RX_FIFO_END			(0x0098)
+#define FCT_RX_FIFO_END_MASK		(0x0000007F)
+
+#define FCT_TX_FIFO_END			(0x009C)
+#define FCT_TX_FIFO_END_MASK		(0x0000003F)
+
+#define FCT_FLOW			(0x00A0)
+#define FCT_FLOW_THRESHOLD_OFF		(0x00007F00)
+#define FCT_FLOW_THRESHOLD_OFF_SHIFT	(8)
+#define FCT_FLOW_THRESHOLD_ON		(0x0000007F)
+
+/* MAC CSRs */
+#define MAC_CR				(0x100)
+#define MAC_CR_ADP			(0x00002000)
+#define MAC_CR_ADD			(0x00001000)
+#define MAC_CR_ASD			(0x00000800)
+#define MAC_CR_INT_LOOP			(0x00000400)
+#define MAC_CR_BOLMT			(0x000000C0)
+#define MAC_CR_FDPX			(0x00000008)
+#define MAC_CR_CFG			(0x00000006)
+#define MAC_CR_CFG_10			(0x00000000)
+#define MAC_CR_CFG_100			(0x00000002)
+#define MAC_CR_CFG_1000			(0x00000004)
+#define MAC_CR_RST			(0x00000001)
+
+#define MAC_RX				(0x104)
+#define MAC_RX_MAX_SIZE			(0x3FFF0000)
+#define MAC_RX_MAX_SIZE_SHIFT		(16)
+#define MAC_RX_FCS_STRIP		(0x00000010)
+#define MAC_RX_FSE			(0x00000004)
+#define MAC_RX_RXD			(0x00000002)
+#define MAC_RX_RXEN			(0x00000001)
+
+#define MAC_TX				(0x108)
+#define MAC_TX_BFCS			(0x00000004)
+#define MAC_TX_TXD			(0x00000002)
+#define MAC_TX_TXEN			(0x00000001)
+
+#define FLOW				(0x10C)
+#define FLOW_FORCE_FC			(0x80000000)
+#define FLOW_TX_FCEN			(0x40000000)
+#define FLOW_RX_FCEN			(0x20000000)
+#define FLOW_FPF			(0x10000000)
+#define FLOW_PAUSE_TIME			(0x0000FFFF)
+
+#define RAND_SEED			(0x110)
+#define RAND_SEED_MASK			(0x0000FFFF)
+
+#define ERR_STS				(0x114)
+#define ERR_STS_FCS_ERR			(0x00000100)
+#define ERR_STS_LFRM_ERR		(0x00000080)
+#define ERR_STS_RUNT_ERR		(0x00000040)
+#define ERR_STS_COLLISION_ERR		(0x00000010)
+#define ERR_STS_ALIGN_ERR		(0x00000008)
+#define ERR_STS_URUN_ERR		(0x00000004)
+
+#define RX_ADDRH			(0x118)
+#define RX_ADDRH_MASK			(0x0000FFFF)
+
+#define RX_ADDRL			(0x11C)
+
+#define MII_ACCESS			(0x120)
+#define MII_ACCESS_PHY_ADDR		(0x0000F800)
+#define MII_ACCESS_PHY_ADDR_SHIFT	(11)
+#define MII_ACCESS_REG_ADDR		(0x000007C0)
+#define MII_ACCESS_REG_ADDR_SHIFT	(6)
+#define MII_ACCESS_READ			(0x00000000)
+#define MII_ACCESS_WRITE		(0x00000002)
+#define MII_ACCESS_BUSY			(0x00000001)
+
+#define MII_DATA			(0x124)
+#define MII_DATA_MASK			(0x0000FFFF)
+
+#define WUCSR				(0x140)
+#define WUCSR_PFDA_FR			(0x00000080)
+#define WUCSR_WUFR			(0x00000040)
+#define WUCSR_MPR			(0x00000020)
+#define WUCSR_BCAST_FR			(0x00000010)
+#define WUCSR_PFDA_EN			(0x00000008)
+#define WUCSR_WUEN			(0x00000004)
+#define WUCSR_MPEN			(0x00000002)
+#define WUCSR_BCST_EN			(0x00000001)
+
+#define WUF_CFGX			(0x144)
+#define WUF_CFGX_EN			(0x80000000)
+#define WUF_CFGX_ATYPE			(0x03000000)
+#define WUF_CFGX_ATYPE_UNICAST		(0x00000000)
+#define WUF_CFGX_ATYPE_MULTICAST	(0x02000000)
+#define WUF_CFGX_ATYPE_ALL		(0x03000000)
+#define WUF_CFGX_PATTERN_OFFSET		(0x007F0000)
+#define WUF_CFGX_PATTERN_OFFSET_SHIFT	(16)
+#define WUF_CFGX_CRC16			(0x0000FFFF)
+#define WUF_NUM				(8)
+
+#define WUF_MASKX			(0x170)
+#define WUF_MASKX_AVALID		(0x80000000)
+#define WUF_MASKX_ATYPE			(0x40000000)
+
+#define ADDR_FILTX			(0x300)
+#define ADDR_FILTX_FB_VALID		(0x80000000)
+#define ADDR_FILTX_FB_TYPE		(0x40000000)
+#define ADDR_FILTX_FB_ADDRHI		(0x0000FFFF)
+#define ADDR_FILTX_SB_ADDRLO		(0xFFFFFFFF)
+
+#define WUCSR2				(0x500)
+#define WUCSR2_NS_RCD			(0x00000040)
+#define WUCSR2_ARP_RCD			(0x00000020)
+#define WUCSR2_TCPSYN_RCD		(0x00000010)
+#define WUCSR2_NS_OFFLOAD		(0x00000004)
+#define WUCSR2_ARP_OFFLOAD		(0x00000002)
+#define WUCSR2_TCPSYN_OFFLOAD		(0x00000001)
+
+#define WOL_FIFO_STS			(0x504)
+
+#define IPV6_ADDRX			(0x510)
+
+#define IPV4_ADDRX			(0x590)
+
+
+/* Vendor-specific PHY Definitions */
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS		(17)
+#define MODE_CTRL_STS_EDPWRDOWN		((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON		((u16)0x0002)
+
+#define PHY_INT_SRC			(29)
+#define PHY_INT_SRC_ENERGY_ON		((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP		((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT	((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN		((u16)0x0010)
+#define PHY_INT_SRC_CLEAR_ALL		((u16)0xffff)
+
+#define PHY_INT_MASK			(30)
+#define PHY_INT_MASK_ENERGY_ON		((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP		((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT	((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN		((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT		(PHY_INT_MASK_ANEG_COMP | \
+					 PHY_INT_MASK_LINK_DOWN)
+
+#define PHY_SPECIAL			(31)
+#define PHY_SPECIAL_SPD			((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF		((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL		((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF		((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL		((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_RDFO_INT		((u32)BIT(22))
+#define INT_ENP_TXE_INT			((u32)BIT(21))
+#define INT_ENP_TX_DIS_INT		((u32)BIT(19))
+#define INT_ENP_RX_DIS_INT		((u32)BIT(18))
+#define INT_ENP_PHY_INT			((u32)BIT(17))
+#define INT_ENP_MAC_ERR_INT		((u32)BIT(15))
+#define INT_ENP_RX_FIFO_DATA_INT	((u32)BIT(12))
+
+#endif /* _SMSC75XX_H */
diff -Naur backports-4.2.6-1.org/drivers/net/usb/smsc95xx.c backports-4.2.6-1/drivers/net/usb/smsc95xx.c
--- backports-4.2.6-1.org/drivers/net/usb/smsc95xx.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/smsc95xx.c	2016-06-28 14:35:18.011973884 +0200
@@ -0,0 +1,2032 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2008 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/bitrev.h>
+#include <linux/crc16.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include "smsc95xx.h"
+
+#define SMSC_CHIPNAME			"smsc95xx"
+#define SMSC_DRIVER_VERSION		"1.0.4"
+#define HS_USB_PKT_SIZE			(512)
+#define FS_USB_PKT_SIZE			(64)
+#define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY		(0x00002000)
+#define MAX_SINGLE_PACKET_SIZE		(2048)
+#define LAN95XX_EEPROM_MAGIC		(0x9500)
+#define EEPROM_MAC_OFFSET		(0x01)
+#define DEFAULT_TX_CSUM_ENABLE		(true)
+#define DEFAULT_RX_CSUM_ENABLE		(true)
+#define SMSC95XX_INTERNAL_PHY_ID	(1)
+#define SMSC95XX_TX_OVERHEAD		(8)
+#define SMSC95XX_TX_OVERHEAD_CSUM	(12)
+#define SUPPORTED_WAKE			(WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
+					 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
+
+#define FEATURE_8_WAKEUP_FILTERS	(0x01)
+#define FEATURE_PHY_NLP_CROSSOVER	(0x02)
+#define FEATURE_REMOTE_WAKEUP		(0x04)
+
+#define SUSPEND_SUSPEND0		(0x01)
+#define SUSPEND_SUSPEND1		(0x02)
+#define SUSPEND_SUSPEND2		(0x04)
+#define SUSPEND_SUSPEND3		(0x08)
+#define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+
+struct smsc95xx_priv {
+	u32 mac_cr;
+	u32 hash_hi;
+	u32 hash_lo;
+	u32 wolopts;
+	spinlock_t mac_cr_lock;
+	u8 features;
+	u8 suspend_flags;
+};
+
+static bool turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
+					    u32 *data, int in_pm)
+{
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+			    index, ret);
+
+	le32_to_cpus(&buf);
+	*data = buf;
+
+	return ret;
+}
+
+static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index,
+					     u32 data, int in_pm)
+{
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	buf = data;
+	cpu_to_le32s(&buf);
+
+	ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static int __must_check smsc95xx_read_reg_nopm(struct usbnet *dev, u32 index,
+					       u32 *data)
+{
+	return __smsc95xx_read_reg(dev, index, data, 1);
+}
+
+static int __must_check smsc95xx_write_reg_nopm(struct usbnet *dev, u32 index,
+						u32 data)
+{
+	return __smsc95xx_write_reg(dev, index, data, 1);
+}
+
+static int __must_check smsc95xx_read_reg(struct usbnet *dev, u32 index,
+					  u32 *data)
+{
+	return __smsc95xx_read_reg(dev, index, data, 0);
+}
+
+static int __must_check smsc95xx_write_reg(struct usbnet *dev, u32 index,
+					   u32 data)
+{
+	return __smsc95xx_write_reg(dev, index, data, 0);
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev,
+						     int in_pm)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading MII_ACCESS\n");
+			return ret;
+		}
+
+		if (!(val & MII_BUSY_))
+			return 0;
+	} while (!time_after(jiffies, start_time + HZ));
+
+	return -EIO;
+}
+
+static int __smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
+				int in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_read\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (read from PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
+	ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_ADDR\n");
+		goto done;
+	}
+
+	ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
+		goto done;
+	}
+
+	ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_DATA\n");
+		goto done;
+	}
+
+	ret = (u16)(val & 0xFFFF);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static void __smsc95xx_mdio_write(struct net_device *netdev, int phy_id,
+				  int idx, int regval, int in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_write\n");
+		goto done;
+	}
+
+	val = regval;
+	ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_DATA\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (write to PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
+	ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_ADDR\n");
+		goto done;
+	}
+
+	ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
+		goto done;
+	}
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc95xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
+				   int idx)
+{
+	return __smsc95xx_mdio_read(netdev, phy_id, idx, 1);
+}
+
+static void smsc95xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
+				     int idx, int regval)
+{
+	__smsc95xx_mdio_write(netdev, phy_id, idx, regval, 1);
+}
+
+static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+	return __smsc95xx_mdio_read(netdev, phy_id, idx, 0);
+}
+
+static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+				int regval)
+{
+	__smsc95xx_mdio_write(netdev, phy_id, idx, regval, 0);
+}
+
+static int __must_check smsc95xx_wait_eeprom(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
+			break;
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
+		netdev_warn(dev->net, "EEPROM read operation timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int __must_check smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY_))
+			return 0;
+
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	netdev_warn(dev->net, "EEPROM is busy\n");
+	return -EIO;
+}
+
+static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc95xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+		val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
+		ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc95xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_DATA\n");
+			return ret;
+		}
+
+		data[i] = val & 0xFF;
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				 u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc95xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	/* Issue write/erase enable command */
+	val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
+	ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing E2P_DATA\n");
+		return ret;
+	}
+
+	ret = smsc95xx_wait_eeprom(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+
+		/* Fill data register */
+		val = data[i];
+		ret = smsc95xx_write_reg(dev, E2P_DATA, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_DATA\n");
+			return ret;
+		}
+
+		/* Send "write" command */
+		val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
+		ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc95xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+	}
+
+	return 0;
+}
+
+static int __must_check smsc95xx_write_reg_async(struct usbnet *dev, u16 index,
+						 u32 data)
+{
+	const u16 size = 4;
+	u32 buf;
+	int ret;
+
+	buf = data;
+	cpu_to_le32s(&buf);
+
+	ret = usbnet_write_cmd_async(dev, USB_VENDOR_REQUEST_WRITE_REGISTER,
+				     USB_DIR_OUT | USB_TYPE_VENDOR |
+				     USB_RECIP_DEVICE,
+				     0, index, &buf, size);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error write async cmd, sts=%d\n",
+			    ret);
+	return ret;
+}
+
+/* returns hash bit number for given MAC address
+ * example:
+ * 01 00 5E 00 00 01 -> returns bit number 31 */
+static unsigned int smsc95xx_hash(char addr[ETH_ALEN])
+{
+	return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
+}
+
+static void smsc95xx_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int ret;
+
+	pdata->hash_hi = 0;
+	pdata->hash_lo = 0;
+
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+
+	if (dev->net->flags & IFF_PROMISC) {
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
+		pdata->mac_cr |= MAC_CR_PRMS_;
+		pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+	} else if (dev->net->flags & IFF_ALLMULTI) {
+		netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
+		pdata->mac_cr |= MAC_CR_MCPAS_;
+		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
+	} else if (!netdev_mc_empty(dev->net)) {
+		struct netdev_hw_addr *ha;
+
+		pdata->mac_cr |= MAC_CR_HPFILT_;
+		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 bitnum = smsc95xx_hash(ha->addr);
+			u32 mask = 0x01 << (bitnum & 0x1F);
+			if (bitnum & 0x20)
+				pdata->hash_hi |= mask;
+			else
+				pdata->hash_lo |= mask;
+		}
+
+		netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
+				   pdata->hash_hi, pdata->hash_lo);
+	} else {
+		netif_dbg(dev, drv, dev->net, "receive own packets only\n");
+		pdata->mac_cr &=
+			~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+	}
+
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	/* Initiate async writes, as we can't wait for completion here */
+	ret = smsc95xx_write_reg_async(dev, HASHH, pdata->hash_hi);
+	if (ret < 0)
+		netdev_warn(dev->net, "failed to initiate async write to HASHH\n");
+
+	ret = smsc95xx_write_reg_async(dev, HASHL, pdata->hash_lo);
+	if (ret < 0)
+		netdev_warn(dev->net, "failed to initiate async write to HASHL\n");
+
+	ret = smsc95xx_write_reg_async(dev, MAC_CR, pdata->mac_cr);
+	if (ret < 0)
+		netdev_warn(dev->net, "failed to initiate async write to MAC_CR\n");
+}
+
+static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
+					   u16 lcladv, u16 rmtadv)
+{
+	u32 flow, afc_cfg = 0;
+
+	int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
+	if (ret < 0)
+		return ret;
+
+	if (duplex == DUPLEX_FULL) {
+		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+		if (cap & FLOW_CTRL_RX)
+			flow = 0xFFFF0002;
+		else
+			flow = 0;
+
+		if (cap & FLOW_CTRL_TX)
+			afc_cfg |= 0xF;
+		else
+			afc_cfg &= ~0xF;
+
+		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
+				   cap & FLOW_CTRL_RX ? "enabled" : "disabled",
+				   cap & FLOW_CTRL_TX ? "enabled" : "disabled");
+	} else {
+		netif_dbg(dev, link, dev->net, "half duplex\n");
+		flow = 0;
+		afc_cfg |= 0xF;
+	}
+
+	ret = smsc95xx_write_reg(dev, FLOW, flow);
+	if (ret < 0)
+		return ret;
+
+	return smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
+}
+
+static int smsc95xx_link_reset(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	struct mii_if_info *mii = &dev->mii;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	unsigned long flags;
+	u16 lcladv, rmtadv;
+	int ret;
+
+	/* clear interrupt status */
+	ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
+	if (ret < 0)
+		return ret;
+
+	mii_check_media(mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
+	rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
+
+	netif_dbg(dev, link, dev->net,
+		  "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+		  ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
+
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+	if (ecmd.duplex != DUPLEX_FULL) {
+		pdata->mac_cr &= ~MAC_CR_FDPX_;
+		pdata->mac_cr |= MAC_CR_RCVOWN_;
+	} else {
+		pdata->mac_cr &= ~MAC_CR_RCVOWN_;
+		pdata->mac_cr |= MAC_CR_FDPX_;
+	}
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error updating PHY flow control\n");
+
+	return ret;
+}
+
+static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
+{
+	u32 intdata;
+
+	if (urb->actual_length != 4) {
+		netdev_warn(dev->net, "unexpected urb length %d\n",
+			    urb->actual_length);
+		return;
+	}
+
+	memcpy(&intdata, urb->transfer_buffer, 4);
+	le32_to_cpus(&intdata);
+
+	netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
+
+	if (intdata & INT_ENP_PHY_INT_)
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+	else
+		netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+			    intdata);
+}
+
+/* Enable or disable Tx & Rx checksum offload engines */
+static int smsc95xx_set_features(struct net_device *netdev,
+	netdev_features_t features)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 read_buf;
+	int ret;
+
+	ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	if (features & NETIF_F_HW_CSUM)
+		read_buf |= Tx_COE_EN_;
+	else
+		read_buf &= ~Tx_COE_EN_;
+
+	if (features & NETIF_F_RXCSUM)
+		read_buf |= Rx_COE_EN_;
+	else
+		read_buf &= ~Rx_COE_EN_;
+
+	ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
+	return 0;
+}
+
+static int smsc95xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+	return MAX_EEPROM_SIZE;
+}
+
+static int smsc95xx_ethtool_get_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	ee->magic = LAN95XX_EEPROM_MAGIC;
+
+	return smsc95xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (ee->magic != LAN95XX_EEPROM_MAGIC) {
+		netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
+			    ee->magic);
+		return -EINVAL;
+	}
+
+	return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc95xx_ethtool_getregslen(struct net_device *netdev)
+{
+	/* all smsc95xx registers */
+	return COE_CR - ID_REV + sizeof(u32);
+}
+
+static void
+smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs,
+			 void *buf)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	unsigned int i, j;
+	int retval;
+	u32 *data = buf;
+
+	retval = smsc95xx_read_reg(dev, ID_REV, &regs->version);
+	if (retval < 0) {
+		netdev_warn(netdev, "REGS: cannot read ID_REV\n");
+		return;
+	}
+
+	for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) {
+		retval = smsc95xx_read_reg(dev, i, &data[j]);
+		if (retval < 0) {
+			netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i);
+			return;
+		}
+	}
+}
+
+static void smsc95xx_ethtool_get_wol(struct net_device *net,
+				     struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+
+	wolinfo->supported = SUPPORTED_WAKE;
+	wolinfo->wolopts = pdata->wolopts;
+}
+
+static int smsc95xx_ethtool_set_wol(struct net_device *net,
+				    struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	int ret;
+
+	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
+
+	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
+	if (ret < 0)
+		netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
+
+	return ret;
+}
+
+static const struct ethtool_ops smsc95xx_ethtool_ops = {
+	.get_link	= usbnet_get_link,
+	.nway_reset	= usbnet_nway_reset,
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.get_eeprom_len	= smsc95xx_ethtool_get_eeprom_len,
+	.get_eeprom	= smsc95xx_ethtool_get_eeprom,
+	.set_eeprom	= smsc95xx_ethtool_set_eeprom,
+	.get_regs_len	= smsc95xx_ethtool_getregslen,
+	.get_regs	= smsc95xx_ethtool_getregs,
+	.get_wol	= smsc95xx_ethtool_get_wol,
+	.set_wol	= smsc95xx_ethtool_set_wol,
+};
+
+static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void smsc95xx_init_mac_address(struct usbnet *dev)
+{
+	/* try reading mac address from EEPROM */
+	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+			dev->net->dev_addr) == 0) {
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n");
+			return;
+		}
+	}
+
+	/* no eeprom, or eeprom values are invalid. generate random MAC */
+	eth_hw_addr_random(dev->net);
+	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
+}
+
+static int smsc95xx_set_mac_address(struct usbnet *dev)
+{
+	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+	int ret;
+
+	ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
+	if (ret < 0)
+		return ret;
+
+	return smsc95xx_write_reg(dev, ADDRH, addr_hi);
+}
+
+/* starts the TX path */
+static int smsc95xx_start_tx_path(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int ret;
+
+	/* Enable Tx at MAC */
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+	pdata->mac_cr |= MAC_CR_TXEN_;
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Tx at SCSRs */
+	return smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_);
+}
+
+/* Starts the Receive path */
+static int smsc95xx_start_rx_path(struct usbnet *dev, int in_pm)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+	pdata->mac_cr |= MAC_CR_RXEN_;
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	return __smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr, in_pm);
+}
+
+static int smsc95xx_phy_initialize(struct usbnet *dev)
+{
+	int bmcr, ret, timeout = 0;
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = smsc95xx_mdio_read;
+	dev->mii.mdio_write = smsc95xx_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = SMSC95XX_INTERNAL_PHY_ID;
+
+	/* reset phy and wait for reset to complete */
+	smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+	do {
+		msleep(10);
+		bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+		timeout++;
+	} while ((bmcr & BMCR_RESET) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on PHY Reset");
+		return -EIO;
+	}
+
+	smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+		ADVERTISE_PAUSE_ASYM);
+
+	/* read to clear */
+	ret = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read PHY_INT_SRC during init\n");
+		return ret;
+	}
+
+	smsc95xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
+		PHY_INT_MASK_DEFAULT_);
+	mii_nway_restart(&dev->mii);
+
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
+	return 0;
+}
+
+static int smsc95xx_reset(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	u32 read_buf, write_buf, burst_cap;
+	int ret = 0, timeout;
+
+	netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
+
+	ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
+	if (ret < 0)
+		return ret;
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+		if (ret < 0)
+			return ret;
+		timeout++;
+	} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
+		return ret;
+	}
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_);
+	if (ret < 0)
+		return ret;
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
+		if (ret < 0)
+			return ret;
+		timeout++;
+	} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
+		return ret;
+	}
+
+	ret = smsc95xx_set_mac_address(dev);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+		  dev->net->dev_addr);
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+		  read_buf);
+
+	read_buf |= HW_CFG_BIR_;
+
+	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
+		  read_buf);
+
+	if (!turbo_mode) {
+		burst_cap = 0;
+		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+	} else if (dev->udev->speed == USB_SPEED_HIGH) {
+		burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+	} else {
+		burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+		  (ulong)dev->rx_urb_size);
+
+	ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BURST_CAP after writing: 0x%08x\n",
+		  read_buf);
+
+	ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
+		  read_buf);
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
+		  read_buf);
+
+	if (turbo_mode)
+		read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
+
+	read_buf &= ~HW_CFG_RXDOFF_;
+
+	/* set Rx data offset=2, Make IP header aligns on word boundary. */
+	read_buf |= NET_IP_ALIGN << 9;
+
+	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
+
+	ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
+	if (ret < 0)
+		return ret;
+	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
+
+	/* Configure GPIO pins as LED outputs */
+	write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+		LED_GPIO_CFG_FDX_LED;
+	ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+	if (ret < 0)
+		return ret;
+
+	/* Init Tx */
+	ret = smsc95xx_write_reg(dev, FLOW, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
+	if (ret < 0)
+		return ret;
+
+	/* Don't need mac_cr_lock during initialisation */
+	ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
+	if (ret < 0)
+		return ret;
+
+	/* Init Rx */
+	/* Set Vlan */
+	ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
+	if (ret < 0)
+		return ret;
+
+	/* Enable or disable checksum offload engines */
+	ret = smsc95xx_set_features(dev->net, dev->net->features);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set checksum offload features\n");
+		return ret;
+	}
+
+	smsc95xx_set_multicast(dev->net);
+
+	ret = smsc95xx_phy_initialize(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to init PHY\n");
+		return ret;
+	}
+
+	ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	/* enable PHY interrupts */
+	read_buf |= INT_EP_CTL_PHY_INT_;
+
+	ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_start_tx_path(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to start TX path\n");
+		return ret;
+	}
+
+	ret = smsc95xx_start_rx_path(dev, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to start RX path\n");
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
+	return 0;
+}
+
+static const struct net_device_ops smsc95xx_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl 		= smsc95xx_ioctl,
+	.ndo_set_rx_mode	= smsc95xx_set_multicast,
+	.ndo_set_features	= smsc95xx_set_features,
+};
+
+static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc95xx_priv *pdata = NULL;
+	u32 val;
+	int ret;
+
+	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
+		return ret;
+	}
+
+	dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc95xx_priv),
+					      GFP_KERNEL);
+
+	pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	if (!pdata)
+		return -ENOMEM;
+
+	spin_lock_init(&pdata->mac_cr_lock);
+
+	if (DEFAULT_TX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_HW_CSUM;
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
+
+	dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+
+	smsc95xx_init_mac_address(dev);
+
+	/* Init all registers */
+	ret = smsc95xx_reset(dev);
+
+	/* detect device revision as different features may be available */
+	ret = smsc95xx_read_reg(dev, ID_REV, &val);
+	if (ret < 0)
+		return ret;
+	val >>= 16;
+
+	if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) ||
+	    (val == ID_REV_CHIP_ID_89530_) || (val == ID_REV_CHIP_ID_9730_))
+		pdata->features = (FEATURE_8_WAKEUP_FILTERS |
+			FEATURE_PHY_NLP_CROSSOVER |
+			FEATURE_REMOTE_WAKEUP);
+	else if (val == ID_REV_CHIP_ID_9512_)
+		pdata->features = FEATURE_8_WAKEUP_FILTERS;
+
+	dev->net->netdev_ops = &smsc95xx_netdev_ops;
+	dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
+	dev->net->flags |= IFF_MULTICAST;
+	dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	return 0;
+}
+
+static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	if (pdata) {
+		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
+		kfree(pdata);
+		pdata = NULL;
+		dev->data[0] = 0;
+	}
+}
+
+static u32 smsc_crc(const u8 *buffer, size_t len, int filter)
+{
+	u32 crc = bitrev16(crc16(0xFFFF, buffer, len));
+	return crc << ((filter % 2) * 16);
+}
+
+static int smsc95xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret;
+
+	netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
+
+	/* read to clear */
+	ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
+	if (ret < 0)
+		return ret;
+
+	/* enable interrupt source */
+	ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret |= mask;
+
+	smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
+
+	return 0;
+}
+
+static int smsc95xx_link_ok_nopm(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret;
+
+	/* first, a dummy read, needed to latch some MII phys */
+	ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & BMSR_LSTATUS);
+}
+
+static int smsc95xx_enter_suspend0(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_));
+	val |= PM_CTL_SUS_MODE_0;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* clear wol status */
+	val &= ~PM_CTL_WUPS_;
+	val |= PM_CTL_WUPS_WOL_;
+
+	/* enable energy detection */
+	if (pdata->wolopts & WAKE_PHY)
+		val |= PM_CTL_WUPS_ED_;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* read back PM_CTRL */
+	ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND0;
+
+	return 0;
+}
+
+static int smsc95xx_enter_suspend1(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	struct mii_if_info *mii = &dev->mii;
+	u32 val;
+	int ret;
+
+	/* reconfigure link pulse detection timing for
+	 * compatibility with non-standard link partners
+	 */
+	if (pdata->features & FEATURE_PHY_NLP_CROSSOVER)
+		smsc95xx_mdio_write_nopm(dev->net, mii->phy_id,	PHY_EDPD_CONFIG,
+			PHY_EDPD_CONFIG_DEFAULT);
+
+	/* enable energy detect power-down mode */
+	ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS);
+	if (ret < 0)
+		return ret;
+
+	ret |= MODE_CTRL_STS_EDPWRDOWN_;
+
+	smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS, ret);
+
+	/* enter SUSPEND1 mode */
+	ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+	val |= PM_CTL_SUS_MODE_1;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* clear wol status, enable energy detection */
+	val &= ~PM_CTL_WUPS_;
+	val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND1;
+
+	return 0;
+}
+
+static int smsc95xx_enter_suspend2(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+	val |= PM_CTL_SUS_MODE_2;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND2;
+
+	return 0;
+}
+
+static int smsc95xx_enter_suspend3(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc95xx_read_reg_nopm(dev, RX_FIFO_INF, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & 0xFFFF) {
+		netdev_info(dev->net, "rx fifo not empty in autosuspend\n");
+		return -EBUSY;
+	}
+
+	ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+	val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* clear wol status */
+	val &= ~PM_CTL_WUPS_;
+	val |= PM_CTL_WUPS_WOL_;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND3;
+
+	return 0;
+}
+
+static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	int ret;
+
+	if (!netif_running(dev->net)) {
+		/* interface is ifconfig down so fully power down hw */
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
+		return smsc95xx_enter_suspend2(dev);
+	}
+
+	if (!link_up) {
+		/* link is down so enter EDPD mode, but only if device can
+		 * reliably resume from it.  This check should be redundant
+		 * as current FEATURE_REMOTE_WAKEUP parts also support
+		 * FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */
+		if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) {
+			netdev_warn(dev->net, "EDPD not supported\n");
+			return -EBUSY;
+		}
+
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
+
+		/* enable PHY wakeup events for if cable is attached */
+		ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
+			PHY_INT_MASK_ANEG_COMP_);
+		if (ret < 0) {
+			netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+			return ret;
+		}
+
+		netdev_info(dev->net, "entering SUSPEND1 mode\n");
+		return smsc95xx_enter_suspend1(dev);
+	}
+
+	/* enable PHY wakeup events so we remote wakeup if cable is pulled */
+	ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
+		PHY_INT_MASK_LINK_DOWN_);
+	if (ret < 0) {
+		netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+		return ret;
+	}
+
+	netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
+	return smsc95xx_enter_suspend3(dev);
+}
+
+static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	u32 val, link_up;
+	int ret;
+
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_suspend error\n");
+		return ret;
+	}
+
+	if (pdata->suspend_flags) {
+		netdev_warn(dev->net, "error during last resume\n");
+		pdata->suspend_flags = 0;
+	}
+
+	/* determine if link is up using only _nopm functions */
+	link_up = smsc95xx_link_ok_nopm(dev);
+
+	if (message.event == PM_EVENT_AUTO_SUSPEND &&
+	    (pdata->features & FEATURE_REMOTE_WAKEUP)) {
+		ret = smsc95xx_autosuspend(dev, link_up);
+		goto done;
+	}
+
+	/* if we get this far we're not autosuspending */
+	/* if no wol options set, or if link is down and we're not waking on
+	 * PHY activity, enter lowest power SUSPEND2 mode
+	 */
+	if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+		!(link_up || (pdata->wolopts & WAKE_PHY))) {
+		netdev_info(dev->net, "entering SUSPEND2 mode\n");
+
+		/* disable energy detect (link up) & wake up events */
+		ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_);
+
+		ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+
+		ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+		if (ret < 0)
+			goto done;
+
+		val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_);
+
+		ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+		if (ret < 0)
+			goto done;
+
+		ret = smsc95xx_enter_suspend2(dev);
+		goto done;
+	}
+
+	if (pdata->wolopts & WAKE_PHY) {
+		ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
+			(PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_LINK_DOWN_));
+		if (ret < 0) {
+			netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+			goto done;
+		}
+
+		/* if link is down then configure EDPD and enter SUSPEND1,
+		 * otherwise enter SUSPEND0 below
+		 */
+		if (!link_up) {
+			netdev_info(dev->net, "entering SUSPEND1 mode\n");
+			ret = smsc95xx_enter_suspend1(dev);
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
+		u32 *filter_mask = kzalloc(sizeof(u32) * 32, GFP_KERNEL);
+		u32 command[2];
+		u32 offset[2];
+		u32 crc[4];
+		int wuff_filter_count =
+			(pdata->features & FEATURE_8_WAKEUP_FILTERS) ?
+			LAN9500A_WUFF_NUM : LAN9500_WUFF_NUM;
+		int i, filter = 0;
+
+		if (!filter_mask) {
+			netdev_warn(dev->net, "Unable to allocate filter_mask\n");
+			ret = -ENOMEM;
+			goto done;
+		}
+
+		memset(command, 0, sizeof(command));
+		memset(offset, 0, sizeof(offset));
+		memset(crc, 0, sizeof(crc));
+
+		if (pdata->wolopts & WAKE_BCAST) {
+			const u8 bcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+			netdev_info(dev->net, "enabling broadcast detection\n");
+			filter_mask[filter * 4] = 0x003F;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x05UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(bcast, 6, filter);
+			filter++;
+		}
+
+		if (pdata->wolopts & WAKE_MCAST) {
+			const u8 mcast[] = {0x01, 0x00, 0x5E};
+			netdev_info(dev->net, "enabling multicast detection\n");
+			filter_mask[filter * 4] = 0x0007;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x09UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x00  << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(mcast, 3, filter);
+			filter++;
+		}
+
+		if (pdata->wolopts & WAKE_ARP) {
+			const u8 arp[] = {0x08, 0x06};
+			netdev_info(dev->net, "enabling ARP detection\n");
+			filter_mask[filter * 4] = 0x0003;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x05UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x0C << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(arp, 2, filter);
+			filter++;
+		}
+
+		if (pdata->wolopts & WAKE_UCAST) {
+			netdev_info(dev->net, "enabling unicast detection\n");
+			filter_mask[filter * 4] = 0x003F;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x01UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(dev->net->dev_addr, ETH_ALEN, filter);
+			filter++;
+		}
+
+		for (i = 0; i < (wuff_filter_count * 4); i++) {
+			ret = smsc95xx_write_reg_nopm(dev, WUFF, filter_mask[i]);
+			if (ret < 0) {
+				kfree(filter_mask);
+				goto done;
+			}
+		}
+		kfree(filter_mask);
+
+		for (i = 0; i < (wuff_filter_count / 4); i++) {
+			ret = smsc95xx_write_reg_nopm(dev, WUFF, command[i]);
+			if (ret < 0)
+				goto done;
+		}
+
+		for (i = 0; i < (wuff_filter_count / 4); i++) {
+			ret = smsc95xx_write_reg_nopm(dev, WUFF, offset[i]);
+			if (ret < 0)
+				goto done;
+		}
+
+		for (i = 0; i < (wuff_filter_count / 2); i++) {
+			ret = smsc95xx_write_reg_nopm(dev, WUFF, crc[i]);
+			if (ret < 0)
+				goto done;
+		}
+
+		/* clear any pending pattern match packet status */
+		ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val |= WUCSR_WUFR_;
+
+		ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+	}
+
+	if (pdata->wolopts & WAKE_MAGIC) {
+		/* clear any pending magic packet status */
+		ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val |= WUCSR_MPR_;
+
+		ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+	}
+
+	/* enable/disable wakeup sources */
+	ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
+	if (ret < 0)
+		goto done;
+
+	if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
+		netdev_info(dev->net, "enabling pattern match wakeup\n");
+		val |= WUCSR_WAKE_EN_;
+	} else {
+		netdev_info(dev->net, "disabling pattern match wakeup\n");
+		val &= ~WUCSR_WAKE_EN_;
+	}
+
+	if (pdata->wolopts & WAKE_MAGIC) {
+		netdev_info(dev->net, "enabling magic packet wakeup\n");
+		val |= WUCSR_MPEN_;
+	} else {
+		netdev_info(dev->net, "disabling magic packet wakeup\n");
+		val &= ~WUCSR_MPEN_;
+	}
+
+	ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
+	if (ret < 0)
+		goto done;
+
+	/* enable wol wakeup source */
+	ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+	if (ret < 0)
+		goto done;
+
+	val |= PM_CTL_WOL_EN_;
+
+	/* phy energy detect wakeup source */
+	if (pdata->wolopts & WAKE_PHY)
+		val |= PM_CTL_ED_EN_;
+
+	ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+	if (ret < 0)
+		goto done;
+
+	/* enable receiver to enable frame reception */
+	smsc95xx_start_rx_path(dev, 1);
+
+	/* some wol options are enabled, so enter SUSPEND0 */
+	netdev_info(dev->net, "entering SUSPEND0 mode\n");
+	ret = smsc95xx_enter_suspend0(dev);
+
+done:
+	/*
+	 * TODO: resume() might need to handle the suspend failure
+	 * in system sleep
+	 */
+	if (ret && PMSG_IS_AUTO(message))
+		usbnet_resume(intf);
+	return ret;
+}
+
+static int smsc95xx_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc95xx_priv *pdata;
+	u8 suspend_flags;
+	int ret;
+	u32 val;
+
+	BUG_ON(!dev);
+	pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	suspend_flags = pdata->suspend_flags;
+
+	netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
+
+	/* do this first to ensure it's cleared even in error case */
+	pdata->suspend_flags = 0;
+
+	if (suspend_flags & SUSPEND_ALLMODES) {
+		/* clear wake-up sources */
+		ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0)
+			return ret;
+
+		val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
+
+		ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0)
+			return ret;
+
+		/* clear wake-up status */
+		ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+		if (ret < 0)
+			return ret;
+
+		val &= ~PM_CTL_WOL_EN_;
+		val |= PM_CTL_WUPS_;
+
+		ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = usbnet_resume(intf);
+	if (ret < 0)
+		netdev_warn(dev->net, "usbnet_resume error\n");
+
+	return ret;
+}
+
+static int smsc95xx_reset_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	int ret;
+
+	ret = smsc95xx_reset(dev);
+	if (ret < 0)
+		return ret;
+
+	return smsc95xx_resume(intf);
+}
+
+static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
+{
+	skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2);
+	skb->ip_summed = CHECKSUM_COMPLETE;
+	skb_trim(skb, skb->len - 2);
+}
+
+static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	while (skb->len > 0) {
+		u32 header, align_count;
+		struct sk_buff *ax_skb;
+		unsigned char *packet;
+		u16 size;
+
+		memcpy(&header, skb->data, sizeof(header));
+		le32_to_cpus(&header);
+		skb_pull(skb, 4 + NET_IP_ALIGN);
+		packet = skb->data;
+
+		/* get the packet length */
+		size = (u16)((header & RX_STS_FL_) >> 16);
+		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+
+		if (unlikely(header & RX_STS_ES_)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "Error header=0x%08x\n", header);
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
+
+			if (header & RX_STS_CRC_) {
+				dev->net->stats.rx_crc_errors++;
+			} else {
+				if (header & (RX_STS_TL_ | RX_STS_RF_))
+					dev->net->stats.rx_frame_errors++;
+
+				if ((header & RX_STS_LE_) &&
+					(!(header & RX_STS_FT_)))
+					dev->net->stats.rx_length_errors++;
+			}
+		} else {
+			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
+			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err header=0x%08x\n", header);
+				return 0;
+			}
+
+			/* last frame in this batch */
+			if (skb->len == size) {
+				if (dev->net->features & NETIF_F_RXCSUM)
+					smsc95xx_rx_csum_offload(skb);
+				skb_trim(skb, skb->len - 4); /* remove fcs */
+				skb->truesize = size + sizeof(struct sk_buff);
+
+				return 1;
+			}
+
+			ax_skb = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!ax_skb)) {
+				netdev_warn(dev->net, "Error allocating skb\n");
+				return 0;
+			}
+
+			ax_skb->len = size;
+			ax_skb->data = packet;
+			skb_set_tail_pointer(ax_skb, size);
+
+			if (dev->net->features & NETIF_F_RXCSUM)
+				smsc95xx_rx_csum_offload(ax_skb);
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+			ax_skb->truesize = size + sizeof(struct sk_buff);
+
+			usbnet_skb_return(dev, ax_skb);
+		}
+
+		skb_pull(skb, size);
+
+		/* padding bytes before the next frame starts */
+		if (skb->len)
+			skb_pull(skb, align_count);
+	}
+
+	if (unlikely(skb->len < 0)) {
+		netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len);
+		return 0;
+	}
+
+	return 1;
+}
+
+static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
+{
+	u16 low_16 = (u16)skb_checksum_start_offset(skb);
+	u16 high_16 = low_16 + skb->csum_offset;
+	return (high_16 << 16) | low_16;
+}
+
+static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
+					 struct sk_buff *skb, gfp_t flags)
+{
+	bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
+	int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
+	u32 tx_cmd_a, tx_cmd_b;
+
+	/* We do not advertise SG, so skbs should be already linearized */
+	BUG_ON(skb_shinfo(skb)->nr_frags);
+
+	if (skb_headroom(skb) < overhead) {
+		struct sk_buff *skb2 = skb_copy_expand(skb,
+			overhead, 0, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	if (csum) {
+		if (skb->len <= 45) {
+			/* workaround - hardware tx checksum does not work
+			 * properly with extremely small packets */
+			long csstart = skb_checksum_start_offset(skb);
+			__wsum calc = csum_partial(skb->data + csstart,
+				skb->len - csstart, 0);
+			*((__sum16 *)(skb->data + csstart
+				+ skb->csum_offset)) = csum_fold(calc);
+
+			csum = false;
+		} else {
+			u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
+			skb_push(skb, 4);
+			cpu_to_le32s(&csum_preamble);
+			memcpy(skb->data, &csum_preamble, 4);
+		}
+	}
+
+	skb_push(skb, 4);
+	tx_cmd_b = (u32)(skb->len - 4);
+	if (csum)
+		tx_cmd_b |= TX_CMD_B_CSUM_ENABLE;
+	cpu_to_le32s(&tx_cmd_b);
+	memcpy(skb->data, &tx_cmd_b, 4);
+
+	skb_push(skb, 4);
+	tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ |
+		TX_CMD_A_LAST_SEG_;
+	cpu_to_le32s(&tx_cmd_a);
+	memcpy(skb->data, &tx_cmd_a, 4);
+
+	return skb;
+}
+
+static int smsc95xx_manage_power(struct usbnet *dev, int on)
+{
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+
+	dev->intf->needs_remote_wakeup = on;
+
+	if (pdata->features & FEATURE_REMOTE_WAKEUP)
+		return 0;
+
+	/* this chip revision isn't capable of remote wakeup */
+	netdev_info(dev->net, "hardware isn't capable of remote wakeup\n");
+
+	if (on)
+		usb_autopm_get_interface_no_resume(dev->intf);
+	else
+		usb_autopm_put_interface(dev->intf);
+
+	return 0;
+}
+
+static const struct driver_info smsc95xx_info = {
+	.description	= "smsc95xx USB 2.0 Ethernet",
+	.bind		= smsc95xx_bind,
+	.unbind		= smsc95xx_unbind,
+	.link_reset	= smsc95xx_link_reset,
+	.reset		= smsc95xx_reset,
+	.rx_fixup	= smsc95xx_rx_fixup,
+	.tx_fixup	= smsc95xx_tx_fixup,
+	.status		= smsc95xx_status,
+	.manage_power	= smsc95xx_manage_power,
+	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		/* SMSC9500 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9500),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9505),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E00),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505A USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E01),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device */
+		USB_DEVICE(0x0424, 0xec00),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500 USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9900),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505 USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9901),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9902),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505A USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9903),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9904),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device (HAL) */
+		USB_DEVICE(0x0424, 0x9905),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505A USB Ethernet Device (HAL) */
+		USB_DEVICE(0x0424, 0x9906),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500 USB Ethernet Device (Alternate ID) */
+		USB_DEVICE(0x0424, 0x9907),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device (Alternate ID) */
+		USB_DEVICE(0x0424, 0x9908),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
+		USB_DEVICE(0x0424, 0x9909),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN9530 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9530),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN9730 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9730),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN89530 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E08),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc95xx_driver = {
+	.name		= "smsc95xx",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= smsc95xx_suspend,
+	.resume		= smsc95xx_resume,
+	.reset_resume	= smsc95xx_reset_resume,
+	.disconnect	= usbnet_disconnect,
+	.disable_hub_initiated_lpm = 1,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(smsc95xx_driver);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
+MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/smsc95xx.h backports-4.2.6-1/drivers/net/usb/smsc95xx.h
--- backports-4.2.6-1.org/drivers/net/usb/smsc95xx.h	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/smsc95xx.h	2016-06-28 14:35:18.011973884 +0200
@@ -0,0 +1,290 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2008 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC95XX_H
+#define _SMSC95XX_H
+
+/* Tx command words */
+#define TX_CMD_A_DATA_OFFSET_		(0x001F0000)
+#define TX_CMD_A_FIRST_SEG_		(0x00002000)
+#define TX_CMD_A_LAST_SEG_		(0x00001000)
+#define TX_CMD_A_BUF_SIZE_		(0x000007FF)
+
+#define TX_CMD_B_CSUM_ENABLE		(0x00004000)
+#define TX_CMD_B_ADD_CRC_DISABLE_	(0x00002000)
+#define TX_CMD_B_DISABLE_PADDING_	(0x00001000)
+#define TX_CMD_B_PKT_BYTE_LENGTH_	(0x000007FF)
+
+/* Rx status word */
+#define RX_STS_FF_			(0x40000000)	/* Filter Fail */
+#define RX_STS_FL_			(0x3FFF0000)	/* Frame Length */
+#define RX_STS_ES_			(0x00008000)	/* Error Summary */
+#define RX_STS_BF_			(0x00002000)	/* Broadcast Frame */
+#define RX_STS_LE_			(0x00001000)	/* Length Error */
+#define RX_STS_RF_			(0x00000800)	/* Runt Frame */
+#define RX_STS_MF_			(0x00000400)	/* Multicast Frame */
+#define RX_STS_TL_			(0x00000080)	/* Frame too long */
+#define RX_STS_CS_			(0x00000040)	/* Collision Seen */
+#define RX_STS_FT_			(0x00000020)	/* Frame Type */
+#define RX_STS_RW_			(0x00000010)	/* Receive Watchdog */
+#define RX_STS_ME_			(0x00000008)	/* Mii Error */
+#define RX_STS_DB_			(0x00000004)	/* Dribbling */
+#define RX_STS_CRC_			(0x00000002)	/* CRC Error */
+
+/* SCSRs */
+#define ID_REV				(0x00)
+#define ID_REV_CHIP_ID_MASK_		(0xFFFF0000)
+#define ID_REV_CHIP_REV_MASK_		(0x0000FFFF)
+#define ID_REV_CHIP_ID_9500_		(0x9500)
+#define ID_REV_CHIP_ID_9500A_		(0x9E00)
+#define ID_REV_CHIP_ID_9512_		(0xEC00)
+#define ID_REV_CHIP_ID_9530_		(0x9530)
+#define ID_REV_CHIP_ID_89530_		(0x9E08)
+#define ID_REV_CHIP_ID_9730_		(0x9730)
+
+#define INT_STS				(0x08)
+#define INT_STS_TX_STOP_		(0x00020000)
+#define INT_STS_RX_STOP_		(0x00010000)
+#define INT_STS_PHY_INT_		(0x00008000)
+#define INT_STS_TXE_			(0x00004000)
+#define INT_STS_TDFU_			(0x00002000)
+#define INT_STS_TDFO_			(0x00001000)
+#define INT_STS_RXDF_			(0x00000800)
+#define INT_STS_GPIOS_			(0x000007FF)
+#define INT_STS_CLEAR_ALL_		(0xFFFFFFFF)
+
+#define RX_CFG				(0x0C)
+#define RX_FIFO_FLUSH_			(0x00000001)
+
+#define TX_CFG				(0x10)
+#define TX_CFG_ON_			(0x00000004)
+#define TX_CFG_STOP_			(0x00000002)
+#define TX_CFG_FIFO_FLUSH_		(0x00000001)
+
+#define HW_CFG				(0x14)
+#define HW_CFG_BIR_			(0x00001000)
+#define HW_CFG_LEDB_			(0x00000800)
+#define HW_CFG_RXDOFF_			(0x00000600)
+#define HW_CFG_DRP_			(0x00000040)
+#define HW_CFG_MEF_			(0x00000020)
+#define HW_CFG_LRST_			(0x00000008)
+#define HW_CFG_PSEL_			(0x00000004)
+#define HW_CFG_BCE_			(0x00000002)
+#define HW_CFG_SRST_			(0x00000001)
+
+#define RX_FIFO_INF			(0x18)
+
+#define PM_CTRL				(0x20)
+#define PM_CTL_RES_CLR_WKP_STS		(0x00000200)
+#define PM_CTL_DEV_RDY_			(0x00000080)
+#define PM_CTL_SUS_MODE_		(0x00000060)
+#define PM_CTL_SUS_MODE_0		(0x00000000)
+#define PM_CTL_SUS_MODE_1		(0x00000020)
+#define PM_CTL_SUS_MODE_2		(0x00000040)
+#define PM_CTL_SUS_MODE_3		(0x00000060)
+#define PM_CTL_PHY_RST_			(0x00000010)
+#define PM_CTL_WOL_EN_			(0x00000008)
+#define PM_CTL_ED_EN_			(0x00000004)
+#define PM_CTL_WUPS_			(0x00000003)
+#define PM_CTL_WUPS_NO_			(0x00000000)
+#define PM_CTL_WUPS_ED_			(0x00000001)
+#define PM_CTL_WUPS_WOL_		(0x00000002)
+#define PM_CTL_WUPS_MULTI_		(0x00000003)
+
+#define LED_GPIO_CFG			(0x24)
+#define LED_GPIO_CFG_SPD_LED		(0x01000000)
+#define LED_GPIO_CFG_LNK_LED		(0x00100000)
+#define LED_GPIO_CFG_FDX_LED		(0x00010000)
+
+#define GPIO_CFG			(0x28)
+
+#define AFC_CFG				(0x2C)
+
+/* Hi watermark = 15.5Kb (~10 mtu pkts) */
+/* low watermark = 3k (~2 mtu pkts) */
+/* backpressure duration = ~ 350us */
+/* Apply FC on any frame. */
+#define AFC_CFG_DEFAULT			(0x00F830A1)
+
+#define E2P_CMD				(0x30)
+#define E2P_CMD_BUSY_			(0x80000000)
+#define E2P_CMD_MASK_			(0x70000000)
+#define E2P_CMD_READ_			(0x00000000)
+#define E2P_CMD_EWDS_			(0x10000000)
+#define E2P_CMD_EWEN_			(0x20000000)
+#define E2P_CMD_WRITE_			(0x30000000)
+#define E2P_CMD_WRAL_			(0x40000000)
+#define E2P_CMD_ERASE_			(0x50000000)
+#define E2P_CMD_ERAL_			(0x60000000)
+#define E2P_CMD_RELOAD_			(0x70000000)
+#define E2P_CMD_TIMEOUT_		(0x00000400)
+#define E2P_CMD_LOADED_			(0x00000200)
+#define E2P_CMD_ADDR_			(0x000001FF)
+
+#define MAX_EEPROM_SIZE			(512)
+
+#define E2P_DATA			(0x34)
+#define E2P_DATA_MASK_			(0x000000FF)
+
+#define BURST_CAP			(0x38)
+
+#define GPIO_WAKE			(0x64)
+
+#define INT_EP_CTL			(0x68)
+#define INT_EP_CTL_INTEP_		(0x80000000)
+#define INT_EP_CTL_MACRTO_		(0x00080000)
+#define INT_EP_CTL_TX_STOP_		(0x00020000)
+#define INT_EP_CTL_RX_STOP_		(0x00010000)
+#define INT_EP_CTL_PHY_INT_		(0x00008000)
+#define INT_EP_CTL_TXE_			(0x00004000)
+#define INT_EP_CTL_TDFU_		(0x00002000)
+#define INT_EP_CTL_TDFO_		(0x00001000)
+#define INT_EP_CTL_RXDF_		(0x00000800)
+#define INT_EP_CTL_GPIOS_		(0x000007FF)
+
+#define BULK_IN_DLY			(0x6C)
+
+/* MAC CSRs */
+#define MAC_CR				(0x100)
+#define MAC_CR_RXALL_			(0x80000000)
+#define MAC_CR_RCVOWN_			(0x00800000)
+#define MAC_CR_LOOPBK_			(0x00200000)
+#define MAC_CR_FDPX_			(0x00100000)
+#define MAC_CR_MCPAS_			(0x00080000)
+#define MAC_CR_PRMS_			(0x00040000)
+#define MAC_CR_INVFILT_			(0x00020000)
+#define MAC_CR_PASSBAD_			(0x00010000)
+#define MAC_CR_HFILT_			(0x00008000)
+#define MAC_CR_HPFILT_			(0x00002000)
+#define MAC_CR_LCOLL_			(0x00001000)
+#define MAC_CR_BCAST_			(0x00000800)
+#define MAC_CR_DISRTY_			(0x00000400)
+#define MAC_CR_PADSTR_			(0x00000100)
+#define MAC_CR_BOLMT_MASK		(0x000000C0)
+#define MAC_CR_DFCHK_			(0x00000020)
+#define MAC_CR_TXEN_			(0x00000008)
+#define MAC_CR_RXEN_			(0x00000004)
+
+#define ADDRH				(0x104)
+
+#define ADDRL				(0x108)
+
+#define HASHH				(0x10C)
+
+#define HASHL				(0x110)
+
+#define MII_ADDR			(0x114)
+#define MII_WRITE_			(0x02)
+#define MII_BUSY_			(0x01)
+#define MII_READ_			(0x00) /* ~of MII Write bit */
+
+#define MII_DATA			(0x118)
+
+#define FLOW				(0x11C)
+#define FLOW_FCPT_			(0xFFFF0000)
+#define FLOW_FCPASS_			(0x00000004)
+#define FLOW_FCEN_			(0x00000002)
+#define FLOW_FCBSY_			(0x00000001)
+
+#define VLAN1				(0x120)
+
+#define VLAN2				(0x124)
+
+#define WUFF				(0x128)
+#define LAN9500_WUFF_NUM		(4)
+#define LAN9500A_WUFF_NUM		(8)
+
+#define WUCSR				(0x12C)
+#define WUCSR_WFF_PTR_RST_		(0x80000000)
+#define WUCSR_GUE_			(0x00000200)
+#define WUCSR_WUFR_			(0x00000040)
+#define WUCSR_MPR_			(0x00000020)
+#define WUCSR_WAKE_EN_			(0x00000004)
+#define WUCSR_MPEN_			(0x00000002)
+
+#define COE_CR				(0x130)
+#define Tx_COE_EN_			(0x00010000)
+#define Rx_COE_MODE_			(0x00000002)
+#define Rx_COE_EN_			(0x00000001)
+
+/* Vendor-specific PHY Definitions */
+
+/* EDPD NLP / crossover time configuration (LAN9500A only) */
+#define PHY_EDPD_CONFIG			(16)
+#define PHY_EDPD_CONFIG_TX_NLP_EN_	((u16)0x8000)
+#define PHY_EDPD_CONFIG_TX_NLP_1000_	((u16)0x0000)
+#define PHY_EDPD_CONFIG_TX_NLP_768_	((u16)0x2000)
+#define PHY_EDPD_CONFIG_TX_NLP_512_	((u16)0x4000)
+#define PHY_EDPD_CONFIG_TX_NLP_256_	((u16)0x6000)
+#define PHY_EDPD_CONFIG_RX_1_NLP_	((u16)0x1000)
+#define PHY_EDPD_CONFIG_RX_NLP_64_	((u16)0x0000)
+#define PHY_EDPD_CONFIG_RX_NLP_256_	((u16)0x0400)
+#define PHY_EDPD_CONFIG_RX_NLP_512_	((u16)0x0800)
+#define PHY_EDPD_CONFIG_RX_NLP_1000_	((u16)0x0C00)
+#define PHY_EDPD_CONFIG_EXT_CROSSOVER_	((u16)0x0001)
+#define PHY_EDPD_CONFIG_DEFAULT		(PHY_EDPD_CONFIG_TX_NLP_EN_ | \
+					 PHY_EDPD_CONFIG_TX_NLP_768_ | \
+					 PHY_EDPD_CONFIG_RX_1_NLP_)
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS		(17)
+#define MODE_CTRL_STS_EDPWRDOWN_	((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON_		((u16)0x0002)
+
+#define SPECIAL_CTRL_STS		(27)
+#define SPECIAL_CTRL_STS_OVRRD_AMDIX_	((u16)0x8000)
+#define SPECIAL_CTRL_STS_AMDIX_ENABLE_	((u16)0x4000)
+#define SPECIAL_CTRL_STS_AMDIX_STATE_	((u16)0x2000)
+
+#define PHY_INT_SRC			(29)
+#define PHY_INT_SRC_ENERGY_ON_		((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP_		((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT_	((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN_		((u16)0x0010)
+
+#define PHY_INT_MASK			(30)
+#define PHY_INT_MASK_ENERGY_ON_		((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP_		((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT_	((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN_		((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT_		(PHY_INT_MASK_ANEG_COMP_ | \
+					 PHY_INT_MASK_LINK_DOWN_)
+
+#define PHY_SPECIAL			(31)
+#define PHY_SPECIAL_SPD_		((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF_		((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL_		((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF_	((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL_	((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_TX_STOP_		((u32)BIT(17))
+#define INT_ENP_RX_STOP_		((u32)BIT(16))
+#define INT_ENP_PHY_INT_		((u32)BIT(15))
+#define INT_ENP_TXE_			((u32)BIT(14))
+#define INT_ENP_TDFU_			((u32)BIT(13))
+#define INT_ENP_TDFO_			((u32)BIT(12))
+#define INT_ENP_RXDF_			((u32)BIT(11))
+
+#endif /* _SMSC95XX_H */
diff -Naur backports-4.2.6-1.org/drivers/net/usb/sr9700.c backports-4.2.6-1/drivers/net/usb/sr9700.c
--- backports-4.2.6-1.org/drivers/net/usb/sr9700.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/sr9700.c	2016-06-28 14:35:18.011973884 +0200
@@ -0,0 +1,559 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on dm9601.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+
+#include "sr9700.h"
+
+static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+
+	err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
+			      length);
+	if ((err != length) && (err >= 0))
+		err = -EINVAL;
+	return err;
+}
+
+static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+
+	err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
+			       length);
+	if ((err >= 0) && (err < length))
+		err = -EINVAL;
+	return err;
+}
+
+static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+	return sr_read(dev, reg, 1, value);
+}
+
+static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+	return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
+				value, reg, NULL, 0);
+}
+
+static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+			       0, reg, data, length);
+}
+
+static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+			       value, reg, NULL, 0);
+}
+
+static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
+{
+	int i;
+
+	for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
+		u8 tmp = 0;
+		int ret;
+
+		udelay(1);
+		ret = sr_read_reg(dev, SR_EPCR, &tmp);
+		if (ret < 0)
+			return ret;
+
+		/* ready */
+		if (!(tmp & EPCR_ERRE))
+			return 0;
+	}
+
+	netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
+
+	return -EIO;
+}
+
+static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
+			      __le16 *value)
+{
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
+	sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
+
+	ret = wait_phy_eeprom_ready(dev, phy);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, SR_EPCR, 0x0);
+	ret = sr_read(dev, SR_EPDR, 2, value);
+
+	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+		   phy, reg, *value, ret);
+
+out_unlock:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
+			       __le16 value)
+{
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = sr_write(dev, SR_EPDR, 2, &value);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
+	sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
+		    (EPCR_WEP | EPCR_ERPRW));
+
+	ret = wait_phy_eeprom_ready(dev, phy);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, SR_EPCR, 0x0);
+
+out_unlock:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+	return sr_share_read_word(dev, 0, offset, value);
+}
+
+static int sr9700_get_eeprom_len(struct net_device *netdev)
+{
+	return SR_EEPROM_LEN;
+}
+
+static int sr9700_get_eeprom(struct net_device *netdev,
+			     struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 *buf = (__le16 *)data;
+	int ret = 0;
+	int i;
+
+	/* access is 16bit */
+	if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
+		return -EINVAL;
+
+	for (i = 0; i < eeprom->len / 2; i++) {
+		ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	int rc = 0;
+
+	if (phy_id) {
+		netdev_dbg(netdev, "Only internal phy supported\n");
+		return 0;
+	}
+
+	/* Access NSR_LINKST bit for link status instead of MII_BMSR */
+	if (loc == MII_BMSR) {
+		u8 value;
+
+		sr_read_reg(dev, SR_NSR, &value);
+		if (value & NSR_LINKST)
+			rc = 1;
+	}
+	sr_share_read_word(dev, 1, loc, &res);
+	if (rc == 1)
+		res = le16_to_cpu(res) | BMSR_LSTATUS;
+	else
+		res = le16_to_cpu(res) & ~BMSR_LSTATUS;
+
+	netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, res);
+
+	return res;
+}
+
+static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			  int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	if (phy_id) {
+		netdev_dbg(netdev, "Only internal phy supported\n");
+		return;
+	}
+
+	netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+
+	sr_share_write_word(dev, 1, loc, res);
+}
+
+static u32 sr9700_get_link(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u8 value = 0;
+	int rc = 0;
+
+	/* Get the Link Status directly */
+	sr_read_reg(dev, SR_NSR, &value);
+	if (value & NSR_LINKST)
+		rc = 1;
+
+	return rc;
+}
+
+static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops sr9700_ethtool_ops = {
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_link	= sr9700_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= sr9700_get_eeprom_len,
+	.get_eeprom	= sr9700_get_eeprom,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.nway_reset	= usbnet_nway_reset,
+};
+
+static void sr9700_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	/* We use the 20 byte dev->data for our 8 byte filter buffer
+	 * to avoid allocating memory that is tricky to free later
+	 */
+	u8 *hashes = (u8 *)&dev->data;
+	/* rx_ctl setting : enable, disable_long, disable_crc */
+	u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
+
+	memset(hashes, 0x00, SR_MCAST_SIZE);
+	/* broadcast address */
+	hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
+	if (netdev->flags & IFF_PROMISC) {
+		rx_ctl |= RCR_PRMSC;
+	} else if (netdev->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(netdev) > SR_MCAST_MAX) {
+		rx_ctl |= RCR_RUNT;
+	} else if (!netdev_mc_empty(netdev)) {
+		struct netdev_hw_addr *ha;
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			hashes[crc >> 3] |= 1 << (crc & 0x7);
+		}
+	}
+
+	sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes);
+	sr_write_reg_async(dev, SR_RCR, rx_ctl);
+}
+
+static int sr9700_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data)) {
+		netdev_err(netdev, "not setting invalid mac address %pM\n",
+			   addr->sa_data);
+		return -EINVAL;
+	}
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	sr_write_async(dev, SR_PAR, 6, netdev->dev_addr);
+
+	return 0;
+}
+
+static const struct net_device_ops sr9700_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= sr9700_ioctl,
+	.ndo_set_rx_mode	= sr9700_set_multicast,
+	.ndo_set_mac_address	= sr9700_set_mac_address,
+};
+
+static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct net_device *netdev;
+	struct mii_if_info *mii;
+	int ret;
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
+
+	netdev = dev->net;
+
+	netdev->netdev_ops = &sr9700_netdev_ops;
+	netdev->ethtool_ops = &sr9700_ethtool_ops;
+	netdev->hard_header_len += SR_TX_OVERHEAD;
+	dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
+	/* bulkin buffer is preferably not less than 3K */
+	dev->rx_urb_size = 3072;
+
+	mii = &dev->mii;
+	mii->dev = netdev;
+	mii->mdio_read = sr_mdio_read;
+	mii->mdio_write = sr_mdio_write;
+	mii->phy_id_mask = 0x1f;
+	mii->reg_num_mask = 0x1f;
+
+	sr_write_reg(dev, SR_NCR, NCR_RST);
+	udelay(20);
+
+	/* read MAC
+	 * After Chip Power on, the Chip will reload the MAC from
+	 * EEPROM automatically to PAR. In case there is no EEPROM externally,
+	 * a default MAC address is stored in PAR for making chip work properly.
+	 */
+	if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) {
+		netdev_err(netdev, "Error reading MAC address\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* power up and reset phy */
+	sr_write_reg(dev, SR_PRR, PRR_PHY_RST);
+	/* at least 10ms, here 20ms for safe */
+	mdelay(20);
+	sr_write_reg(dev, SR_PRR, 0);
+	/* at least 1ms, here 2ms for reading right register */
+	udelay(2 * 1000);
+
+	/* receive broadcast packets */
+	sr9700_set_multicast(netdev);
+
+	sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
+	sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
+		      ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(mii);
+
+out:
+	return ret;
+}
+
+static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct sk_buff *sr_skb;
+	int len;
+
+	/* skb content (packets) format :
+	 *                    p0            p1            p2    ......    pm
+	 *                 /      \
+	 *            /                \
+	 *        /                            \
+	 *  /                                        \
+	 * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
+	 *
+	 * p0 : packet 0
+	 * p0b0 : packet 0 byte 0
+	 *
+	 * b0: rx status
+	 * b1: packet length (incl crc) low
+	 * b2: packet length (incl crc) high
+	 * b3..n-4: packet data
+	 * bn-3..bn: ethernet packet crc
+	 */
+	if (unlikely(skb->len < SR_RX_OVERHEAD)) {
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	/* one skb may contains multiple packets */
+	while (skb->len > SR_RX_OVERHEAD) {
+		if (skb->data[0] != 0x40)
+			return 0;
+
+		/* ignore the CRC length */
+		len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+		if (len > ETH_FRAME_LEN)
+			return 0;
+
+		/* the last packet of current skb */
+		if (skb->len == (len + SR_RX_OVERHEAD))	{
+			skb_pull(skb, 3);
+			skb->len = len;
+			skb_set_tail_pointer(skb, len);
+			skb->truesize = len + sizeof(struct sk_buff);
+			return 2;
+		}
+
+		/* skb_clone is used for address align */
+		sr_skb = skb_clone(skb, GFP_ATOMIC);
+		if (!sr_skb)
+			return 0;
+
+		sr_skb->len = len;
+		sr_skb->data = skb->data + 3;
+		skb_set_tail_pointer(sr_skb, len);
+		sr_skb->truesize = len + sizeof(struct sk_buff);
+		usbnet_skb_return(dev, sr_skb);
+
+		skb_pull(skb, len + SR_RX_OVERHEAD);
+	};
+
+	return 0;
+}
+
+static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len;
+
+	/* SR9700 can only send out one ethernet packet at once.
+	 *
+	 * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
+	 *
+	 * b0: rx status
+	 * b1: packet length (incl crc) low
+	 * b2: packet length (incl crc) high
+	 * b3..n-4: packet data
+	 * bn-3..bn: ethernet packet crc
+	 */
+
+	len = skb->len;
+
+	if (skb_headroom(skb) < SR_TX_OVERHEAD) {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	__skb_push(skb, SR_TX_OVERHEAD);
+
+	/* usbnet adds padding if length is a multiple of packet size
+	 * if so, adjust length value in header
+	 */
+	if ((skb->len % dev->maxpacket) == 0)
+		len++;
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+static void sr9700_status(struct usbnet *dev, struct urb *urb)
+{
+	int link;
+	u8 *buf;
+
+	/* format:
+	   b0: net status
+	   b1: tx status 1
+	   b2: tx status 2
+	   b3: rx status
+	   b4: rx overflow
+	   b5: rx count
+	   b6: tx count
+	   b7: gpr
+	*/
+
+	if (urb->actual_length < 8)
+		return;
+
+	buf = urb->transfer_buffer;
+
+	link = !!(buf[0] & 0x40);
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static int sr9700_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd;
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
+		   ecmd.speed, ecmd.duplex);
+
+	return 0;
+}
+
+static const struct driver_info sr9700_driver_info = {
+	.description	= "CoreChip SR9700 USB Ethernet",
+	.flags		= FLAG_ETHER,
+	.bind		= sr9700_bind,
+	.rx_fixup	= sr9700_rx_fixup,
+	.tx_fixup	= sr9700_tx_fixup,
+	.status		= sr9700_status,
+	.link_reset	= sr9700_link_reset,
+	.reset		= sr9700_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE(0x0fe6, 0x9700),	/* SR9700 device */
+		.driver_info = (unsigned long)&sr9700_driver_info,
+	},
+	{},			/* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr9700_usb_driver = {
+	.name		= "sr9700",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(sr9700_usb_driver);
+
+MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
+MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/sr9700.h backports-4.2.6-1/drivers/net/usb/sr9700.h
--- backports-4.2.6-1.org/drivers/net/usb/sr9700.h	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/sr9700.h	2016-06-28 14:35:18.011973884 +0200
@@ -0,0 +1,173 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _SR9700_H
+#define	_SR9700_H
+
+/* sr9700 spec. register table on Linux platform */
+
+/* Network Control Reg */
+#define	SR_NCR			0x00
+#define		NCR_RST			(1 << 0)
+#define		NCR_LBK			(3 << 1)
+#define		NCR_FDX			(1 << 3)
+#define		NCR_WAKEEN		(1 << 6)
+/* Network Status Reg */
+#define	SR_NSR			0x01
+#define		NSR_RXRDY		(1 << 0)
+#define		NSR_RXOV		(1 << 1)
+#define		NSR_TX1END		(1 << 2)
+#define		NSR_TX2END		(1 << 3)
+#define		NSR_TXFULL		(1 << 4)
+#define		NSR_WAKEST		(1 << 5)
+#define		NSR_LINKST		(1 << 6)
+#define		NSR_SPEED		(1 << 7)
+/* Tx Control Reg */
+#define	SR_TCR			0x02
+#define		TCR_CRC_DIS		(1 << 1)
+#define		TCR_PAD_DIS		(1 << 2)
+#define		TCR_LC_CARE		(1 << 3)
+#define		TCR_CRS_CARE	(1 << 4)
+#define		TCR_EXCECM		(1 << 5)
+#define		TCR_LF_EN		(1 << 6)
+/* Tx Status Reg for Packet Index 1 */
+#define	SR_TSR1		0x03
+#define		TSR1_EC			(1 << 2)
+#define		TSR1_COL		(1 << 3)
+#define		TSR1_LC			(1 << 4)
+#define		TSR1_NC			(1 << 5)
+#define		TSR1_LOC		(1 << 6)
+#define		TSR1_TLF		(1 << 7)
+/* Tx Status Reg for Packet Index 2 */
+#define	SR_TSR2		0x04
+#define		TSR2_EC			(1 << 2)
+#define		TSR2_COL		(1 << 3)
+#define		TSR2_LC			(1 << 4)
+#define		TSR2_NC			(1 << 5)
+#define		TSR2_LOC		(1 << 6)
+#define		TSR2_TLF		(1 << 7)
+/* Rx Control Reg*/
+#define	SR_RCR			0x05
+#define		RCR_RXEN		(1 << 0)
+#define		RCR_PRMSC		(1 << 1)
+#define		RCR_RUNT		(1 << 2)
+#define		RCR_ALL			(1 << 3)
+#define		RCR_DIS_CRC		(1 << 4)
+#define		RCR_DIS_LONG	(1 << 5)
+/* Rx Status Reg */
+#define	SR_RSR			0x06
+#define		RSR_AE			(1 << 2)
+#define		RSR_MF			(1 << 6)
+#define		RSR_RF			(1 << 7)
+/* Rx Overflow Counter Reg */
+#define	SR_ROCR		0x07
+#define		ROCR_ROC		(0x7F << 0)
+#define		ROCR_RXFU		(1 << 7)
+/* Back Pressure Threshold Reg */
+#define	SR_BPTR		0x08
+#define		BPTR_JPT		(0x0F << 0)
+#define		BPTR_BPHW		(0x0F << 4)
+/* Flow Control Threshold Reg */
+#define	SR_FCTR		0x09
+#define		FCTR_LWOT		(0x0F << 0)
+#define		FCTR_HWOT		(0x0F << 4)
+/* rx/tx Flow Control Reg */
+#define	SR_FCR			0x0A
+#define		FCR_FLCE		(1 << 0)
+#define		FCR_BKPA		(1 << 4)
+#define		FCR_TXPEN		(1 << 5)
+#define		FCR_TXPF		(1 << 6)
+#define		FCR_TXP0		(1 << 7)
+/* Eeprom & Phy Control Reg */
+#define	SR_EPCR		0x0B
+#define		EPCR_ERRE		(1 << 0)
+#define		EPCR_ERPRW		(1 << 1)
+#define		EPCR_ERPRR		(1 << 2)
+#define		EPCR_EPOS		(1 << 3)
+#define		EPCR_WEP		(1 << 4)
+/* Eeprom & Phy Address Reg */
+#define	SR_EPAR		0x0C
+#define		EPAR_EROA		(0x3F << 0)
+#define		EPAR_PHY_ADR_MASK	(0x03 << 6)
+#define		EPAR_PHY_ADR		(0x01 << 6)
+/* Eeprom &	Phy Data Reg */
+#define	SR_EPDR		0x0D	/* 0x0D ~ 0x0E for Data Reg Low & High */
+/* Wakeup Control Reg */
+#define	SR_WCR			0x0F
+#define		WCR_MAGICST		(1 << 0)
+#define		WCR_LINKST		(1 << 2)
+#define		WCR_MAGICEN		(1 << 3)
+#define		WCR_LINKEN		(1 << 5)
+/* Physical Address Reg */
+#define	SR_PAR			0x10	/* 0x10 ~ 0x15 6 bytes for PAR */
+/* Multicast Address Reg */
+#define	SR_MAR			0x16	/* 0x16 ~ 0x1D 8 bytes for MAR */
+/* 0x1e unused */
+/* Phy Reset Reg */
+#define	SR_PRR			0x1F
+#define		PRR_PHY_RST		(1 << 0)
+/* Tx sdram Write Pointer Address Low */
+#define	SR_TWPAL		0x20
+/* Tx sdram Write Pointer Address High */
+#define	SR_TWPAH		0x21
+/* Tx sdram Read Pointer Address Low */
+#define	SR_TRPAL		0x22
+/* Tx sdram Read Pointer Address High */
+#define	SR_TRPAH		0x23
+/* Rx sdram Write Pointer Address Low */
+#define	SR_RWPAL		0x24
+/* Rx sdram Write Pointer Address High */
+#define	SR_RWPAH		0x25
+/* Rx sdram Read Pointer Address Low */
+#define	SR_RRPAL		0x26
+/* Rx sdram Read Pointer Address High */
+#define	SR_RRPAH		0x27
+/* Vendor ID register */
+#define	SR_VID			0x28	/* 0x28 ~ 0x29 2 bytes for VID */
+/* Product ID register */
+#define	SR_PID			0x2A	/* 0x2A ~ 0x2B 2 bytes for PID */
+/* CHIP Revision register */
+#define	SR_CHIPR		0x2C
+/* 0x2D --> 0xEF unused */
+/* USB Device Address */
+#define	SR_USBDA		0xF0
+#define		USBDA_USBFA		(0x7F << 0)
+/* RX packet Counter Reg */
+#define	SR_RXC			0xF1
+/* Tx packet Counter & USB Status Reg */
+#define	SR_TXC_USBS		0xF2
+#define		TXC_USBS_TXC0		(1 << 0)
+#define		TXC_USBS_TXC1		(1 << 1)
+#define		TXC_USBS_TXC2		(1 << 2)
+#define		TXC_USBS_EP1RDY		(1 << 5)
+#define		TXC_USBS_SUSFLAG	(1 << 6)
+#define		TXC_USBS_RXFAULT	(1 << 7)
+/* USB Control register */
+#define	SR_USBC			0xF4
+#define		USBC_EP3NAK		(1 << 4)
+#define		USBC_EP3ACK		(1 << 5)
+
+/* Register access commands and flags */
+#define	SR_RD_REGS		0x00
+#define	SR_WR_REGS		0x01
+#define	SR_WR_REG		0x03
+#define	SR_REQ_RD_REG	(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define	SR_REQ_WR_REG	(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* parameters */
+#define	SR_SHARE_TIMEOUT	1000
+#define	SR_EEPROM_LEN		256
+#define	SR_MCAST_SIZE		8
+#define	SR_MCAST_ADDR_FLAG	0x80
+#define	SR_MCAST_MAX		64
+#define	SR_TX_OVERHEAD		2	/* 2bytes header */
+#define	SR_RX_OVERHEAD		7	/* 3bytes header + 4crc tail */
+
+#endif	/* _SR9700_H */
diff -Naur backports-4.2.6-1.org/drivers/net/usb/sr9800.c backports-4.2.6-1/drivers/net/usb/sr9800.c
--- backports-4.2.6-1.org/drivers/net/usb/sr9800.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/sr9800.c	2016-06-28 14:35:18.015307217 +0200
@@ -0,0 +1,875 @@
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on asix_common.c, asix_devices.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.*
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#include "sr9800.h"
+
+static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			    u16 size, void *data)
+{
+	int err;
+
+	err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
+			      data, size);
+	if ((err != size) && (err >= 0))
+		err = -EINVAL;
+
+	return err;
+}
+
+static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			     u16 size, void *data)
+{
+	int err;
+
+	err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
+			      data, size);
+	if ((err != size) && (err >= 0))
+		err = -EINVAL;
+
+	return err;
+}
+
+static void
+sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
+			       size);
+}
+
+static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int offset = 0;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	while (offset + sizeof(u32) < skb->len) {
+		struct sk_buff *sr_skb;
+		u16 size;
+		u32 header = get_unaligned_le32(skb->data + offset);
+
+		offset += sizeof(u32);
+		/* get the packet length */
+		size = (u16) (header & 0x7ff);
+		if (size != ((~header >> 16) & 0x07ff)) {
+			netdev_err(dev->net, "%s : Bad Header Length\n",
+				   __func__);
+			return 0;
+		}
+
+		if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
+		    (size + offset > skb->len)) {
+			netdev_err(dev->net, "%s : Bad RX Length %d\n",
+				   __func__, size);
+			return 0;
+		}
+		sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
+		if (!sr_skb)
+			return 0;
+
+		skb_put(sr_skb, size);
+		memcpy(sr_skb->data, skb->data + offset, size);
+		usbnet_skb_return(dev, sr_skb);
+
+		offset += (size + 1) & 0xfffe;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
+			   skb->len);
+		return 0;
+	}
+
+	return 1;
+}
+
+static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+					gfp_t flags)
+{
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 padbytes = 0xffff0000;
+	u32 packet_len;
+	int padlen;
+
+	padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
+
+	if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
+		if ((headroom < 4) || (tailroom < padlen)) {
+			skb->data = memmove(skb->head + 4, skb->data,
+					    skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	skb_push(skb, 4);
+	packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+	cpu_to_le32s(&packet_len);
+	skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+	if (padlen) {
+		cpu_to_le32s(&padbytes);
+		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+		skb_put(skb, sizeof(padbytes));
+	}
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
+	return skb;
+}
+
+static void sr_status(struct usbnet *dev, struct urb *urb)
+{
+	struct sr9800_int_data *event;
+	int link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	link = event->link & 0x01;
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+
+	return;
+}
+
+static inline int sr_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+
+	ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+static inline int sr_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+
+	ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+static inline int sr_get_phy_addr(struct usbnet *dev)
+{
+	u8 buf[2];
+	int ret;
+
+	ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	if (ret < 0) {
+		netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
+			   __func__, ret);
+		goto out;
+	}
+	netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
+		   *((__le16 *)buf));
+
+	ret = buf[1];
+
+out:
+	return ret;
+}
+
+static int sr_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+	ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset:%02x\n",
+			   ret);
+
+	return ret;
+}
+
+static u16 sr_read_rx_ctl(struct usbnet *dev)
+{
+	__le16 v;
+	int ret;
+
+	ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
+			   ret);
+		goto out;
+	}
+
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net,
+			   "Failed to write RX_CTL mode to 0x%04x:%02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+static u16 sr_read_medium_status(struct usbnet *dev)
+{
+	__le16 v;
+	int ret;
+
+	ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	if (ret < 0) {
+		netdev_err(dev->net,
+			   "Error reading Medium Status register:%02x\n", ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+}
+
+static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net,
+			   "Failed to write Medium Mode mode to 0x%04x:%02x\n",
+			   mode, ret);
+	return ret;
+}
+
+static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
+			   value, ret);
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/* SR9800 have a 16-bit RX_CTL value */
+static void sr_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	u16 rx_ctl = SR_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= SR_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > SR_MAX_MCAST) {
+		rx_ctl |= SR_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later
+		 */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   SR_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= SR_RX_CTL_AM;
+	}
+
+	sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 res;
+
+	mutex_lock(&dev->phy_mutex);
+	sr_set_sw_mii(dev);
+	sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
+	sr_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net,
+		   "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+static void
+sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 res = cpu_to_le16(val);
+
+	netdev_dbg(dev->net,
+		   "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
+		   phy_id, loc, val);
+	mutex_lock(&dev->phy_mutex);
+	sr_set_sw_mii(dev);
+	sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+	sr_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 sr_get_phyid(struct usbnet *dev)
+{
+	int phy_reg;
+	u32 phy_id;
+	int i;
+
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
+		return 0;
+
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+	if (phy_reg < 0)
+		return 0;
+
+	phy_id |= (phy_reg & 0xffff);
+
+	return phy_id;
+}
+
+static void
+sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & SR_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & SR_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= SR_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= SR_MONITOR_MAGIC;
+
+	if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
+			 opt, 0, 0, NULL) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sr_get_eeprom_len(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+
+	return data->eeprom_len;
+}
+
+static int sr_get_eeprom(struct net_device *net,
+			      struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 *ebuf = (__le16 *)data;
+	int ret;
+	int i;
+
+	/* Crude hack to ensure that we don't overwrite memory
+	 * if an odd length is supplied
+	 */
+	if (eeprom->len % 2)
+		return -EINVAL;
+
+	eeprom->magic = SR_EEPROM_MAGIC;
+
+	/* sr9800 returns 2 bytes from eeprom on read */
+	for (i = 0; i < eeprom->len / 2; i++) {
+		ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
+				  0, 2, &ebuf[i]);
+		if (ret < 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static void sr_get_drvinfo(struct net_device *net,
+				 struct ethtool_drvinfo *info)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	info->eedump_len = data->eeprom_len;
+}
+
+static u32 sr_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int sr_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later
+	 */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+			   data->mac_addr);
+
+	return 0;
+}
+
+static const struct ethtool_ops sr9800_ethtool_ops = {
+	.get_drvinfo	= sr_get_drvinfo,
+	.get_link	= sr_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_wol	= sr_get_wol,
+	.set_wol	= sr_set_wol,
+	.get_eeprom_len	= sr_get_eeprom_len,
+	.get_eeprom	= sr_get_eeprom,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.nway_reset	= usbnet_nway_reset,
+};
+
+static int sr9800_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	u16 mode;
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = SR9800_MEDIUM_DEFAULT;
+
+	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
+		mode &= ~SR_MEDIUM_PS;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode &= ~SR_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
+		   __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	sr_write_medium_mode(dev, mode);
+
+	return 0;
+}
+
+
+static int sr9800_set_default_mode(struct usbnet *dev)
+{
+	u16 rx_ctl;
+	int ret;
+
+	sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		      ADVERTISE_ALL | ADVERTISE_CSMA);
+	mii_nway_restart(&dev->mii);
+
+	ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
+	if (ret < 0)
+		goto out;
+
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
+				SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
+				SR9800_IPG2_DEFAULT, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = sr_read_medium_status(dev);
+	netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+out:
+	return ret;
+}
+
+static int sr9800_reset(struct usbnet *dev)
+{
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+
+	ret = sr_write_gpio(dev,
+			SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
+	if (ret < 0)
+		goto out;
+
+	embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+
+	ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+
+	ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	if (embd_phy) {
+		ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
+		if (ret < 0)
+			goto out;
+	}
+
+	msleep(150);
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = sr_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	ret = sr_sw_reset(dev, SR_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = sr9800_set_default_mode(dev);
+	if (ret < 0)
+		goto out;
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct net_device_ops sr9800_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address	= sr_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= sr_ioctl,
+	.ndo_set_rx_mode        = sr_set_multicast,
+};
+
+static int sr9800_phy_powerup(struct usbnet *dev)
+{
+	int ret;
+
+	/* set the embedded Ethernet PHY in power-down state */
+	ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	/* set the embedded Ethernet PHY in power-up state */
+	ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+		return ret;
+	}
+	msleep(600);
+
+	/* set the embedded Ethernet PHY in reset state */
+	ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	/* set the embedded Ethernet PHY in power-up state */
+	ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	u16 led01_mux, led23_mux;
+	int ret, embd_phy;
+	u32 phyid;
+	u16 rx_ctl;
+
+	data->eeprom_len = SR9800_EEPROM_LEN;
+
+	usbnet_get_endpoints(dev, intf);
+
+	/* LED Setting Rule :
+	 * AABB:CCDD
+	 * AA : MFA0(LED0)
+	 * BB : MFA1(LED1)
+	 * CC : MFA2(LED2), Reserved for SR9800
+	 * DD : MFA3(LED3), Reserved for SR9800
+	 */
+	led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
+	led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
+	ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
+	if (ret < 0) {
+			netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
+			goto out;
+	}
+
+	/* Get the MAC address */
+	ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
+			  dev->net->dev_addr);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+		return ret;
+	}
+	netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = sr_mdio_read;
+	dev->mii.mdio_write = sr_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = sr_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &sr9800_netdev_ops;
+	dev->net->ethtool_ops = &sr9800_ethtool_ops;
+
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	/* Reset the PHY to normal operation mode */
+	ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Init PHY routine */
+	ret = sr9800_phy_powerup(dev);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = sr_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = sr_get_phyid(dev);
+	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+	/* medium mode setting */
+	ret = sr9800_set_default_mode(dev);
+	if (ret < 0)
+		goto out;
+
+	if (dev->udev->speed == USB_SPEED_HIGH) {
+		ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
+			0, NULL);
+		if (ret < 0) {
+			netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+			goto out;
+		}
+		dev->rx_urb_size =
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
+	} else {
+		ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
+			0, NULL);
+		if (ret < 0) {
+			netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+			goto out;
+		}
+		dev->rx_urb_size =
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
+	}
+	netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__,
+		   dev->rx_urb_size);
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct driver_info sr9800_driver_info = {
+	.description	= "CoreChip SR9800 USB 2.0 Ethernet",
+	.bind		= sr9800_bind,
+	.status		= sr_status,
+	.link_reset	= sr9800_link_reset,
+	.reset		= sr9800_reset,
+	.flags		= DRIVER_FLAG,
+	.rx_fixup	= sr_rx_fixup,
+	.tx_fixup	= sr_tx_fixup,
+};
+
+static const struct usb_device_id	products[] = {
+	{
+		USB_DEVICE(0x0fe6, 0x9800),	/* SR9800 Device  */
+		.driver_info = (unsigned long) &sr9800_driver_info,
+	},
+	{},		/* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disconnect	= usbnet_disconnect,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(sr_driver);
+
+MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
+MODULE_LICENSE("GPL");
diff -Naur backports-4.2.6-1.org/drivers/net/usb/sr9800.h backports-4.2.6-1/drivers/net/usb/sr9800.h
--- backports-4.2.6-1.org/drivers/net/usb/sr9800.h	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/sr9800.h	2016-06-28 14:35:18.015307217 +0200
@@ -0,0 +1,202 @@
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef	_SR9800_H
+#define	_SR9800_H
+
+/* SR9800 spec. command table on Linux Platform */
+
+/* command : Software Station Management Control Reg */
+#define SR_CMD_SET_SW_MII		0x06
+/* command : PHY Read Reg */
+#define SR_CMD_READ_MII_REG		0x07
+/* command : PHY Write Reg */
+#define SR_CMD_WRITE_MII_REG		0x08
+/* command : Hardware Station Management Control Reg */
+#define SR_CMD_SET_HW_MII		0x0a
+/* command : SROM Read Reg */
+#define SR_CMD_READ_EEPROM		0x0b
+/* command : SROM Write Reg */
+#define SR_CMD_WRITE_EEPROM		0x0c
+/* command : SROM Write Enable Reg */
+#define SR_CMD_WRITE_ENABLE		0x0d
+/* command : SROM Write Disable Reg */
+#define SR_CMD_WRITE_DISABLE		0x0e
+/* command : RX Control Read Reg */
+#define SR_CMD_READ_RX_CTL		0x0f
+#define		SR_RX_CTL_PRO			(1 << 0)
+#define		SR_RX_CTL_AMALL			(1 << 1)
+#define		SR_RX_CTL_SEP			(1 << 2)
+#define		SR_RX_CTL_AB			(1 << 3)
+#define		SR_RX_CTL_AM			(1 << 4)
+#define		SR_RX_CTL_AP			(1 << 5)
+#define		SR_RX_CTL_ARP			(1 << 6)
+#define		SR_RX_CTL_SO			(1 << 7)
+#define		SR_RX_CTL_RH1M			(1 << 8)
+#define		SR_RX_CTL_RH2M			(1 << 9)
+#define		SR_RX_CTL_RH3M			(1 << 10)
+/* command : RX Control Write Reg */
+#define SR_CMD_WRITE_RX_CTL		0x10
+/* command : IPG0/IPG1/IPG2 Control Read Reg */
+#define SR_CMD_READ_IPG012		0x11
+/* command : IPG0/IPG1/IPG2 Control Write Reg */
+#define SR_CMD_WRITE_IPG012		0x12
+/* command : Node ID Read Reg */
+#define SR_CMD_READ_NODE_ID		0x13
+/* command : Node ID Write Reg */
+#define SR_CMD_WRITE_NODE_ID		0x14
+/* command : Multicast Filter Array Read Reg */
+#define	SR_CMD_READ_MULTI_FILTER	0x15
+/* command : Multicast Filter Array Write Reg */
+#define SR_CMD_WRITE_MULTI_FILTER	0x16
+/* command : Eth/HomePNA PHY Address Reg */
+#define SR_CMD_READ_PHY_ID		0x19
+/* command : Medium Status Read Reg */
+#define SR_CMD_READ_MEDIUM_STATUS	0x1a
+#define		SR_MONITOR_LINK			(1 << 1)
+#define		SR_MONITOR_MAGIC		(1 << 2)
+#define		SR_MONITOR_HSFS			(1 << 4)
+/* command : Medium Status Write Reg */
+#define SR_CMD_WRITE_MEDIUM_MODE	0x1b
+#define		SR_MEDIUM_GM			(1 << 0)
+#define		SR_MEDIUM_FD			(1 << 1)
+#define		SR_MEDIUM_AC			(1 << 2)
+#define		SR_MEDIUM_ENCK			(1 << 3)
+#define		SR_MEDIUM_RFC			(1 << 4)
+#define		SR_MEDIUM_TFC			(1 << 5)
+#define		SR_MEDIUM_JFE			(1 << 6)
+#define		SR_MEDIUM_PF			(1 << 7)
+#define		SR_MEDIUM_RE			(1 << 8)
+#define		SR_MEDIUM_PS			(1 << 9)
+#define		SR_MEDIUM_RSV			(1 << 10)
+#define		SR_MEDIUM_SBP			(1 << 11)
+#define		SR_MEDIUM_SM			(1 << 12)
+/* command : Monitor Mode Status Read Reg */
+#define SR_CMD_READ_MONITOR_MODE	0x1c
+/* command : Monitor Mode Status Write Reg */
+#define SR_CMD_WRITE_MONITOR_MODE	0x1d
+/* command : GPIO Status Read Reg */
+#define SR_CMD_READ_GPIOS		0x1e
+#define		SR_GPIO_GPO0EN		(1 << 0) /* GPIO0 Output enable */
+#define		SR_GPIO_GPO_0		(1 << 1) /* GPIO0 Output value */
+#define		SR_GPIO_GPO1EN		(1 << 2) /* GPIO1 Output enable */
+#define		SR_GPIO_GPO_1		(1 << 3) /* GPIO1 Output value */
+#define		SR_GPIO_GPO2EN		(1 << 4) /* GPIO2 Output enable */
+#define		SR_GPIO_GPO_2		(1 << 5) /* GPIO2 Output value */
+#define		SR_GPIO_RESERVED	(1 << 6) /* Reserved */
+#define		SR_GPIO_RSE		(1 << 7) /* Reload serial EEPROM */
+/* command : GPIO Status Write Reg */
+#define SR_CMD_WRITE_GPIOS		0x1f
+/* command : Eth PHY Power and Reset Control Reg */
+#define SR_CMD_SW_RESET			0x20
+#define		SR_SWRESET_CLEAR		0x00
+#define		SR_SWRESET_RR			(1 << 0)
+#define		SR_SWRESET_RT			(1 << 1)
+#define		SR_SWRESET_PRTE			(1 << 2)
+#define		SR_SWRESET_PRL			(1 << 3)
+#define		SR_SWRESET_BZ			(1 << 4)
+#define		SR_SWRESET_IPRL			(1 << 5)
+#define		SR_SWRESET_IPPD			(1 << 6)
+/* command : Software Interface Selection Status Read Reg */
+#define SR_CMD_SW_PHY_STATUS		0x21
+/* command : Software Interface Selection Status Write Reg */
+#define SR_CMD_SW_PHY_SELECT		0x22
+/* command : BULK in Buffer Size Reg */
+#define	SR_CMD_BULKIN_SIZE		0x2A
+/* command : LED_MUX Control Reg */
+#define	SR_CMD_LED_MUX			0x70
+#define		SR_LED_MUX_TX_ACTIVE		(1 << 0)
+#define		SR_LED_MUX_RX_ACTIVE		(1 << 1)
+#define		SR_LED_MUX_COLLISION		(1 << 2)
+#define		SR_LED_MUX_DUP_COL		(1 << 3)
+#define		SR_LED_MUX_DUP			(1 << 4)
+#define		SR_LED_MUX_SPEED		(1 << 5)
+#define		SR_LED_MUX_LINK_ACTIVE		(1 << 6)
+#define		SR_LED_MUX_LINK			(1 << 7)
+
+/* Register Access Flags */
+#define SR_REQ_RD_REG   (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define SR_REQ_WR_REG   (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* Multicast Filter Array size & Max Number */
+#define	SR_MCAST_FILTER_SIZE		8
+#define	SR_MAX_MCAST			64
+
+/* IPG0/1/2 Default Value */
+#define	SR9800_IPG0_DEFAULT		0x15
+#define	SR9800_IPG1_DEFAULT		0x0c
+#define	SR9800_IPG2_DEFAULT		0x12
+
+/* Medium Status Default Mode */
+#define SR9800_MEDIUM_DEFAULT	\
+	(SR_MEDIUM_FD | SR_MEDIUM_RFC | \
+	 SR_MEDIUM_TFC | SR_MEDIUM_PS | \
+	 SR_MEDIUM_AC | SR_MEDIUM_RE)
+
+/* RX Control Default Setting */
+#define SR_DEFAULT_RX_CTL	\
+	(SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)
+
+/* EEPROM Magic Number & EEPROM Size */
+#define SR_EEPROM_MAGIC			0xdeadbeef
+#define SR9800_EEPROM_LEN		0xff
+
+/* SR9800 Driver Version and Driver Name */
+#define DRIVER_VERSION			"11-Nov-2013"
+#define DRIVER_NAME			"CoreChips"
+#define	DRIVER_FLAG		\
+	(FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |  FLAG_MULTI_PACKET)
+
+/* SR9800 BULKIN Buffer Size */
+#define SR9800_MAX_BULKIN_2K		0
+#define SR9800_MAX_BULKIN_4K		1
+#define SR9800_MAX_BULKIN_6K		2
+#define SR9800_MAX_BULKIN_8K		3
+#define SR9800_MAX_BULKIN_16K		4
+#define SR9800_MAX_BULKIN_20K		5
+#define SR9800_MAX_BULKIN_24K		6
+#define SR9800_MAX_BULKIN_32K		7
+
+struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
+	/* 2k */
+	{2048, 0x8000, 0x8001},
+	/* 4k */
+	{4096, 0x8100, 0x8147},
+	/* 6k */
+	{6144, 0x8200, 0x81EB},
+	/* 8k */
+	{8192, 0x8300, 0x83D7},
+	/* 16 */
+	{16384, 0x8400, 0x851E},
+	/* 20k */
+	{20480, 0x8500, 0x8666},
+	/* 24k */
+	{24576, 0x8600, 0x87AE},
+	/* 32k */
+	{32768, 0x8700, 0x8A3D},
+};
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct sr_data {
+	u8 multi_filter[SR_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
+	u8 phymode;
+	u8 ledmode;
+	u8 eeprom_len;
+};
+
+struct sr9800_int_data {
+	__le16 res1;
+	u8 link;
+	__le16 res2;
+	u8 status;
+	__le16 res3;
+} __packed;
+
+#endif	/* _SR9800_H */
diff -Naur backports-4.2.6-1.org/drivers/net/usb/zaurus.c backports-4.2.6-1/drivers/net/usb/zaurus.c
--- backports-4.2.6-1.org/drivers/net/usb/zaurus.c	1970-01-01 01:00:00.000000000 +0100
+++ backports-4.2.6-1/drivers/net/usb/zaurus.c	2016-06-28 14:35:18.015307217 +0200
@@ -0,0 +1,385 @@
+/*
+ * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2002-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * All known Zaurii lie about their standards conformance.  At least
+ * the earliest SA-1100 models lie by saying they support CDC Ethernet.
+ * Some later models (especially PXA-25x and PXA-27x based ones) lie
+ * and say they support CDC MDLM (for access to cell phone modems).
+ *
+ * There are non-Zaurus products that use these same protocols too.
+ *
+ * The annoying thing is that at the same time Sharp was developing
+ * that annoying standards-breaking software, the Linux community had
+ * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
+ * That is, the same functionality but not violating standards.
+ *
+ * The CDC Ethernet nonconformance points are troublesome to hosts
+ * with a true CDC Ethernet implementation:
+ *   - Framing appends a CRC, which the spec says drivers "must not" do;
+ *   - Transfers data in altsetting zero, instead of altsetting 1;
+ *   - All these peripherals use the same ethernet address.
+ *
+ * The CDC MDLM nonconformance is less immediately troublesome, since all
+ * MDLM implementations are quasi-proprietary anyway.
+ */
+
+static struct sk_buff *
+zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	int			padlen;
+	struct sk_buff		*skb2;
+
+	padlen = 2;
+	if (!skb_cloned(skb)) {
+		int	tailroom = skb_tailroom(skb);
+		if ((padlen + 4) <= tailroom)
+			goto done;
+	}
+	skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+	if (skb) {
+		u32		fcs;
+done:
+		fcs = crc32_le(~0, skb->data, skb->len);
+		fcs = ~fcs;
+
+		*skb_put (skb, 1) = fcs       & 0xff;
+		*skb_put (skb, 1) = (fcs>> 8) & 0xff;
+		*skb_put (skb, 1) = (fcs>>16) & 0xff;
+		*skb_put (skb, 1) = (fcs>>24) & 0xff;
+	}
+	return skb;
+}
+
+static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	/* Belcarra's funky framing has other options; mostly
+	 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
+	 */
+	dev->net->hard_header_len += 6;
+	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+	return usbnet_generic_cdc_bind(dev, intf);
+}
+
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+	return 0;
+}
+
+static const struct driver_info	zaurus_sl5x00_info = {
+	.description =	"Sharp Zaurus SL-5x00",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	ZAURUS_STRONGARM_INFO	((unsigned long)&zaurus_sl5x00_info)
+
+static const struct driver_info	zaurus_pxa_info = {
+	.description =	"Sharp Zaurus, PXA-2xx based",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	ZAURUS_PXA_INFO		((unsigned long)&zaurus_pxa_info)
+
+static const struct driver_info	olympus_mxl_info = {
+	.description =	"Olympus R1000",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	OLYMPUS_MXL_INFO	((unsigned long)&olympus_mxl_info)
+
+
+/* Some more recent products using Lineo/Belcarra code will wrongly claim
+ * CDC MDLM conformance.  They aren't conformant:  data endpoints live
+ * in the control interface, there's no data interface, and it's not used
+ * to talk to a cell phone radio.  But at least we can detect these two
+ * pseudo-classes, rather than growing this product list with entries for
+ * each new nonconformant product (sigh).
+ */
+static const u8 safe_guid[16] = {
+	0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+	0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+};
+static const u8 blan_guid[16] = {
+	0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
+	0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
+};
+
+static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8				*buf = intf->cur_altsetting->extra;
+	int				len = intf->cur_altsetting->extralen;
+	struct usb_cdc_mdlm_desc	*desc = NULL;
+	struct usb_cdc_mdlm_detail_desc	*detail = NULL;
+
+	while (len > 3) {
+		if (buf [1] != USB_DT_CS_INTERFACE)
+			goto next_desc;
+
+		/* use bDescriptorSubType, and just verify that we get a
+		 * "BLAN" (or "SAFE") descriptor.
+		 */
+		switch (buf [2]) {
+		case USB_CDC_MDLM_TYPE:
+			if (desc) {
+				dev_dbg(&intf->dev, "extra MDLM\n");
+				goto bad_desc;
+			}
+			desc = (void *) buf;
+			if (desc->bLength != sizeof *desc) {
+				dev_dbg(&intf->dev, "MDLM len %u\n",
+					desc->bLength);
+				goto bad_desc;
+			}
+			/* expect bcdVersion 1.0, ignore */
+			if (memcmp(&desc->bGUID, blan_guid, 16) &&
+			    memcmp(&desc->bGUID, safe_guid, 16)) {
+				/* hey, this one might _really_ be MDLM! */
+				dev_dbg(&intf->dev, "MDLM guid\n");
+				goto bad_desc;
+			}
+			break;
+		case USB_CDC_MDLM_DETAIL_TYPE:
+			if (detail) {
+				dev_dbg(&intf->dev, "extra MDLM detail\n");
+				goto bad_desc;
+			}
+			detail = (void *) buf;
+			switch (detail->bGuidDescriptorType) {
+			case 0:			/* "SAFE" */
+				if (detail->bLength != (sizeof *detail + 2))
+					goto bad_detail;
+				break;
+			case 1:			/* "BLAN" */
+				if (detail->bLength != (sizeof *detail + 3))
+					goto bad_detail;
+				break;
+			default:
+				goto bad_detail;
+			}
+
+			/* assuming we either noticed BLAN already, or will
+			 * find it soon, there are some data bytes here:
+			 *  - bmNetworkCapabilities (unused)
+			 *  - bmDataCapabilities (bits, see below)
+			 *  - bPad (ignored, for PADAFTER -- BLAN-only)
+			 * bits are:
+			 *  - 0x01 -- Zaurus framing (add CRC)
+			 *  - 0x02 -- PADBEFORE (CRC includes some padding)
+			 *  - 0x04 -- PADAFTER (some padding after CRC)
+			 *  - 0x08 -- "fermat" packet mangling (for hw bugs)
+			 * the PADBEFORE appears not to matter; we interop
+			 * with devices that use it and those that don't.
+			 */
+			if ((detail->bDetailData[1] & ~0x02) != 0x01) {
+				/* bmDataCapabilities == 0 would be fine too,
+				 * but framing is minidriver-coupled for now.
+				 */
+bad_detail:
+				dev_dbg(&intf->dev,
+						"bad MDLM detail, %d %d %d\n",
+						detail->bLength,
+						detail->bDetailData[0],
+						detail->bDetailData[2]);
+				goto bad_desc;
+			}
+
+			/* same extra framing as for non-BLAN mode */
+			dev->net->hard_header_len += 6;
+			dev->rx_urb_size = dev->net->hard_header_len
+					+ dev->net->mtu;
+			break;
+		}
+next_desc:
+		len -= buf [0];	/* bLength */
+		buf += buf [0];
+	}
+
+	if (!desc || !detail) {
+		dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
+			desc ? "" : "func ",
+			detail ? "" : "detail ");
+		goto bad_desc;
+	}
+
+	/* There's probably a CDC Ethernet descriptor there, but we can't
+	 * rely on the Ethernet address it provides since not all vendors
+	 * bother to make it unique.  Likewise there's no point in tracking
+	 * of the CDC event notifications.
+	 */
+	return usbnet_get_endpoints(dev, intf);
+
+bad_desc:
+	dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
+	return -ENODEV;
+}
+
+static const struct driver_info	bogus_mdlm_info = {
+	.description =	"pseudo-MDLM (BLAN) device",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.tx_fixup =	zaurus_tx_fixup,
+	.bind =		blan_mdlm_bind,
+};
+
+static const struct usb_device_id	products [] = {
+#define	ZAURUS_MASTER_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8004,
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_STRONGARM_INFO,
+},
+
+/* PXA-2xx based models are also lying-about-cdc.  If you add any
+ * more devices that claim to be CDC Ethernet, make sure they get
+ * added to the blacklist in cdc_ether too.
+ *
+ * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
+ * unlike the older ones with 2.4 "embedix" kernels.
+ */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,	/* A-300 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,	/* B-500/SL-5600 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+	          | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,	/* C-700 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9031,	/* C-750 C-760 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	/* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
+	USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9032,	/* SL-6000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	/* reported with some C860 units */
+	.idProduct              = 0x9050,	/* C-860 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+},
+{
+	/* Motorola Rokr E6 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	/* Motorola MOTOMAGX phones */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x07B4,
+	.idProduct              = 0x0F02,	/* R-1000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = OLYMPUS_MXL_INFO,
+},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver zaurus_driver = {
+	.name =		"zaurus",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(zaurus_driver);
+
+MODULE_AUTHOR("Pavel Machek, David Brownell");
+MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
+MODULE_LICENSE("GPL");