src/initscripts/init.d/firewall

   1 #!/bin/sh
   2
   3 eval $(/usr/local/bin/readhash /var/ipfire/ppp/settings)
   4 eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
   5 eval $(/usr/local/bin/readhash /var/ipfire/optionsfw/settings)
   6 IFACE=`/bin/cat /var/ipfire/red/iface 2> /dev/null | /usr/bin/tr -d '\012'`
   7
   8 if [ -f /var/ipfire/red/device ]; then
   9         DEVICE=`/bin/cat /var/ipfire/red/device 2> /dev/null | /usr/bin/tr -d '\012'`
  10 fi
  11
  12 iptables_init() {
  13         # Flush all rules and delete all custom chains
  14         /sbin/iptables -F
  15         /sbin/iptables -t nat -F
  16         /sbin/iptables -t mangle -F
  17         /sbin/iptables -X
  18         /sbin/iptables -t nat -X
  19         /sbin/iptables -t mangle -X
  20
  21         # Set up policies
  22         /sbin/iptables -P INPUT DROP
  23         /sbin/iptables -P FORWARD DROP
  24         /sbin/iptables -P OUTPUT ACCEPT
  25
  26         # Empty LOG_DROP and LOG_REJECT chains
  27         /sbin/iptables -N LOG_DROP
  28         /sbin/iptables -A LOG_DROP   -m limit --limit 10/minute -j LOG
  29         /sbin/iptables -A LOG_DROP   -j DROP
  30         /sbin/iptables -N LOG_REJECT
  31         /sbin/iptables -A LOG_REJECT -m limit --limit 10/minute -j LOG
  32         /sbin/iptables -A LOG_REJECT -j REJECT
  33
  34         # This chain will log, then DROPs packets with certain bad combinations
  35         # of flags might indicate a port-scan attempt (xmas, null, etc)
  36         /sbin/iptables -N PSCAN
  37         if [ "$DROPPORTSCAN" == "on" ]; then
  38                 /sbin/iptables -A PSCAN -p tcp  -m limit --limit 10/minute -j LOG --log-prefix "DROP_TCP Scan " -m comment --comment "DROP_TCP PScan"
  39                 /sbin/iptables -A PSCAN -p udp  -m limit --limit 10/minute -j LOG --log-prefix "DROP_UDP Scan " -m comment --comment "DROP_UDP PScan"
  40                 /sbin/iptables -A PSCAN -p icmp -m limit --limit 10/minute -j LOG --log-prefix "DROP_ICMP Scan " -m comment --comment "DROP_ICMP PScan"
  41                 /sbin/iptables -A PSCAN -f      -m limit --limit 10/minute -j LOG --log-prefix "DROP_FRAG Scan " -m comment --comment "DROP_FRAG PScan"
  42         fi
  43         /sbin/iptables -A PSCAN -j DROP -m comment --comment "DROP_PScan"
  44
  45         # New tcp packets without SYN set - could well be an obscure type of port scan
  46         # that's not covered above, may just be a broken windows machine
  47         /sbin/iptables -N NEWNOTSYN
  48         if [ "$DROPNEWNOTSYN" == "on" ]; then
  49                 /sbin/iptables -A NEWNOTSYN  -m limit --limit 10/minute -j LOG  --log-prefix "DROP_NEWNOTSYN "
  50         fi
  51         /sbin/iptables -A NEWNOTSYN  -j DROP -m comment --comment "DROP_NEWNOTSYN"
  52
  53         # Chain to contain all the rules relating to bad TCP flags
  54         /sbin/iptables -N BADTCP
  55
  56         # Disallow packets frequently used by port-scanners
  57         # nmap xmas
  58         /sbin/iptables -A BADTCP -p tcp --tcp-flags ALL FIN,URG,PSH  -j PSCAN
  59         # Null
  60         /sbin/iptables -A BADTCP -p tcp --tcp-flags ALL NONE -j PSCAN
  61         # FIN
  62         /sbin/iptables -A BADTCP -p tcp --tcp-flags ALL FIN -j PSCAN
  63         # SYN/RST (also catches xmas variants that set SYN+RST+...)
  64         /sbin/iptables -A BADTCP -p tcp --tcp-flags SYN,RST SYN,RST -j PSCAN
  65         # SYN/FIN (QueSO or nmap OS probe)
  66         /sbin/iptables -A BADTCP -p tcp --tcp-flags SYN,FIN SYN,FIN -j PSCAN
  67         # NEW TCP without SYN
  68         /sbin/iptables -A BADTCP -p tcp ! --syn -m state --state NEW -j NEWNOTSYN
  69
  70         /sbin/iptables -A INPUT   -j BADTCP
  71         /sbin/iptables -A FORWARD -j BADTCP
  72
  73 }
  74
  75 iptables_red() {
  76         /sbin/iptables -F REDINPUT
  77         /sbin/iptables -F REDFORWARD
  78         /sbin/iptables -t nat -F REDNAT
  79
  80         # PPPoE / PPTP Device
  81         if [ "$IFACE" != "" ]; then
  82                 # PPPoE / PPTP
  83                 if [ "$DEVICE" != "" ]; then
  84                         /sbin/iptables -A REDINPUT -i $DEVICE -j ACCEPT
  85                 fi
  86                 if [ "$RED_TYPE" == "PPTP" -o "$RED_TYPE" == "PPPOE" ]; then
  87                         if [ "$RED_DEV" != "" ]; then
  88                                 /sbin/iptables -A REDINPUT -i $RED_DEV -j ACCEPT
  89                         fi
  90                 fi
  91         fi
  92
  93         # PPTP over DHCP
  94         if [ "$DEVICE" != "" -a "$TYPE" == "PPTP" -a "$METHOD" == "DHCP" ]; then
  95                 /sbin/iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i $DEVICE -j ACCEPT
  96                 /sbin/iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i $DEVICE -j ACCEPT
  97         fi
  98
  99         # Orange pinholes
 100         if [ "$ORANGE_DEV" != "" ]; then
 101                 # This rule enables a host on ORANGE network to connect to the outside
 102                 # (only if we have a red connection)
 103                 if [ "$IFACE" != "" ]; then
 104                         /sbin/iptables -A REDFORWARD -i $ORANGE_DEV -o $IFACE -j ACCEPT
 105                 fi
 106         fi
 107
 108         if [ "$IFACE" != "" -a -f /var/ipfire/red/active ]; then
 109                 # DHCP
 110                 if [ "$RED_DEV" != "" -a "$RED_TYPE" == "DHCP" ]; then
 111                         /sbin/iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 112                         /sbin/iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 113                 fi
 114                 if [ "$METHOD" == "DHCP"  -a "$PROTOCOL" == "RFC1483" ]; then
 115                         /sbin/iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 116                         /sbin/iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 117                 fi
 118
 119                 # Outgoing masquerading (don't masqerade IPSEC (mark 50))
 120                 /sbin/iptables -t nat -A REDNAT -m mark --mark 50 -o $IFACE -j RETURN
 121                 /sbin/iptables -t nat -A REDNAT -o $IFACE -j MASQUERADE
 122
 123         fi
 124 }
 125
 126 # See how we were called.
 127 case "$1" in
 128   start)
 129         iptables_init
 130
 131         # Limit Packets- helps reduce dos/syn attacks
 132         # original do nothing line
 133         #/sbin/iptables -A INPUT -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -m limit --limit 10/sec
 134         # the correct one, but the negative '!' do nothing...
 135         #/sbin/iptables -A INPUT -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN ! -m limit --limit 10/sec -j DROP
 136
 137         # Fix for braindead ISP's
 138         /sbin/iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
 139
 140         # CUSTOM chains, can be used by the users themselves
 141         /sbin/iptables -N CUSTOMINPUT
 142         /sbin/iptables -A INPUT -j CUSTOMINPUT
 143         /sbin/iptables -N GUARDIANINPUT
 144         /sbin/iptables -A INPUT -j GUARDIANINPUT
 145         /sbin/iptables -N CUSTOMFORWARD
 146         /sbin/iptables -A FORWARD -j CUSTOMFORWARD
 147         /sbin/iptables -N CUSTOMOUTPUT
 148         /sbin/iptables -A OUTPUT -j CUSTOMOUTPUT
 149         /sbin/iptables -N OUTGOINGFW
 150         /sbin/iptables -N OUTGOINGFWMAC
 151         /sbin/iptables -A OUTPUT -j OUTGOINGFW
 152         /sbin/iptables -t nat -N CUSTOMPREROUTING
 153         /sbin/iptables -t nat -A PREROUTING -j CUSTOMPREROUTING
 154         /sbin/iptables -t nat -N CUSTOMPOSTROUTING
 155         /sbin/iptables -t nat -A POSTROUTING -j CUSTOMPOSTROUTING
 156
 157         # IPTV chains for IGMPPROXY
 158         /sbin/iptables -N IPTVINPUT
 159         /sbin/iptables -A INPUT -j IPTVINPUT
 160         /sbin/iptables -N IPTVFORWARD
 161         /sbin/iptables -A FORWARD -j IPTVFORWARD
 162
 163         # filtering from GUI
 164         /sbin/iptables -N GUIINPUT
 165         /sbin/iptables -A INPUT -j GUIINPUT
 166         /sbin/iptables -A GUIINPUT -p icmp --icmp-type 8 -j ACCEPT
 167
 168         # Accept everything connected
 169         /sbin/iptables -A INPUT   -m state --state ESTABLISHED,RELATED -j ACCEPT
 170         /sbin/iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
 171
 172         # trafic from ipsecX/TUN/TAP interfaces, before "-i GREEN_DEV" accept everything
 173         /sbin/iptables -N IPSECINPUT
 174         /sbin/iptables -N IPSECFORWARD
 175         /sbin/iptables -N IPSECOUTPUT
 176         /sbin/iptables -N OPENSSLVIRTUAL
 177         /sbin/iptables -A INPUT -j IPSECINPUT
 178         /sbin/iptables -A INPUT -j OPENSSLVIRTUAL -m comment --comment "OPENSSLVIRTUAL INPUT"
 179         /sbin/iptables -A FORWARD -j IPSECFORWARD
 180         /sbin/iptables -A FORWARD -j OPENSSLVIRTUAL -m comment --comment "OPENSSLVIRTUAL FORWARD"
 181         /sbin/iptables -A OUTPUT -j IPSECOUTPUT
 182         /sbin/iptables -t nat -N IPSECNAT
 183         /sbin/iptables -t nat -A POSTROUTING -j IPSECNAT
 184
 185         # Outgoing Firewall
 186         /sbin/iptables -A FORWARD -j OUTGOINGFWMAC
 187         /sbin/iptables -A FORWARD -j OUTGOINGFW
 188
 189         # localhost and ethernet.
 190         /sbin/iptables -A INPUT   -i lo          -m state --state NEW -j ACCEPT
 191         /sbin/iptables -A INPUT   -s 127.0.0.0/8 -m state --state NEW -j DROP   # Loopback not on lo
 192         /sbin/iptables -A INPUT   -d 127.0.0.0/8 -m state --state NEW -j DROP
 193         /sbin/iptables -A FORWARD -i lo          -m state --state NEW -j ACCEPT
 194         /sbin/iptables -A FORWARD -s 127.0.0.0/8 -m state --state NEW -j DROP
 195         /sbin/iptables -A FORWARD -d 127.0.0.0/8 -m state --state NEW -j DROP
 196         /sbin/iptables -A INPUT   -i $GREEN_DEV  -m state --state NEW -j ACCEPT ! -p icmp
 197         /sbin/iptables -A FORWARD -i $GREEN_DEV  -m state --state NEW -j ACCEPT
 198
 199         # If a host on orange tries to initiate a connection to IPFire's red IP and
 200         # the connection gets DNATed back through a port forward to a server on orange
 201         # we end up with orange -> orange traffic passing through IPFire
 202         [ "$ORANGE_DEV" != "" ] && /sbin/iptables -A FORWARD -i $ORANGE_DEV -o $ORANGE_DEV -m state --state NEW -j ACCEPT
 203
 204         # allow DHCP on BLUE to be turned on/off
 205         /sbin/iptables -N DHCPBLUEINPUT
 206         /sbin/iptables -A INPUT -j DHCPBLUEINPUT
 207
 208         # OPenSSL
 209         /sbin/iptables -N OPENSSLPHYSICAL
 210         /sbin/iptables -A INPUT -j OPENSSLPHYSICAL
 211
 212         # WIRELESS chains
 213         /sbin/iptables -N WIRELESSINPUT
 214         /sbin/iptables -A INPUT -m state --state NEW -j WIRELESSINPUT
 215         /sbin/iptables -N WIRELESSFORWARD
 216         /sbin/iptables -A FORWARD -m state --state NEW -j WIRELESSFORWARD
 217
 218         # RED chain, used for the red interface
 219         /sbin/iptables -N REDINPUT
 220         /sbin/iptables -A INPUT -j REDINPUT
 221         /sbin/iptables -N REDFORWARD
 222         /sbin/iptables -A FORWARD -j REDFORWARD
 223         /sbin/iptables -t nat -N REDNAT
 224         /sbin/iptables -t nat -A POSTROUTING -j REDNAT
 225
 226         iptables_red
 227
 228         # DMZ pinhole chain.  setdmzholes setuid prog adds rules here to allow
 229         # ORANGE to talk to GREEN / BLUE.
 230         /sbin/iptables -N DMZHOLES
 231         if [ "$ORANGE_DEV" != "" ]; then
 232                 /sbin/iptables -A FORWARD -i $ORANGE_DEV -m state --state NEW -j DMZHOLES
 233         fi
 234
 235         # XTACCESS chain, used for external access
 236         /sbin/iptables -N XTACCESS
 237         /sbin/iptables -A INPUT -m state --state NEW -j XTACCESS
 238
 239         # PORTFWACCESS chain, used for portforwarding
 240         /sbin/iptables -N PORTFWACCESS
 241         /sbin/iptables -A FORWARD -m state --state NEW -j PORTFWACCESS
 242
 243         # Custom prerouting chains (for transparent proxy and port forwarding)
 244         /sbin/iptables -t nat -N SQUID
 245         /sbin/iptables -t nat -A PREROUTING -j SQUID
 246         /sbin/iptables -t nat -N PORTFW
 247         /sbin/iptables -t nat -A PREROUTING -j PORTFW
 248
 249         # upnp chain for our upnp daemon
 250         /sbin/iptables -t nat -N UPNPFW
 251         /sbin/iptables -t nat -A PREROUTING -j UPNPFW
 252
 253
 254         # Custom mangle chain (for port fowarding)
 255         /sbin/iptables -t mangle -N PORTFWMANGLE
 256         /sbin/iptables -t mangle -A PREROUTING -j PORTFWMANGLE
 257
 258         # Postrouting rules (for port forwarding)
 259         /sbin/iptables -t nat -A POSTROUTING -m mark --mark 1 -j SNAT \
 260          --to-source $GREEN_ADDRESS
 261         if [ "$BLUE_DEV" != "" ]; then
 262                 /sbin/iptables -t nat -A POSTROUTING -m mark --mark 2 -j SNAT --to-source $BLUE_ADDRESS
 263         fi
 264         if [ "$ORANGE_DEV" != "" ]; then
 265                 /sbin/iptables -t nat -A POSTROUTING -m mark --mark 3 -j SNAT --to-source $ORANGE_ADDRESS
 266         fi
 267
 268         # run local firewall configuration, if present
 269         if [ -x /etc/sysconfig/firewall.local ]; then
 270                 /etc/sysconfig/firewall.local start
 271         fi
 272
 273         # last rule in input and forward chain is for logging.
 274
 275         if [ "$DROPINPUT" == "on" ]; then
 276                 /sbin/iptables -A INPUT -m limit --limit 10/minute -j LOG --log-prefix "DROP_INPUT "
 277         fi
 278         /sbin/iptables -A INPUT -j DROP -m comment --comment "DROP_INPUT"
 279         if [ "$DROPOUTPUT" == "on" ]; then
 280                 /sbin/iptables -A FORWARD -m limit --limit 10/minute -j LOG --log-prefix "DROP_OUTPUT "
 281         fi
 282         /sbin/iptables -A FORWARD -j DROP -m comment --comment "DROP_OUTPUT"
 283         ;;
 284   startovpn)
 285         # run openvpn
 286         /usr/local/bin/openvpnctrl --create-chains-and-rules
 287         ;;
 288   stop)
 289         iptables_init
 290         # Accept everyting connected
 291         /sbin/iptables -A INPUT   -m state --state ESTABLISHED,RELATED -j ACCEPT
 292
 293         # localhost and ethernet.
 294         /sbin/iptables -A INPUT -i lo -j ACCEPT
 295         /sbin/iptables -A INPUT -i $GREEN_DEV -m state --state NEW -j ACCEPT
 296
 297         if [ "$RED_DEV" != "" -a "$RED_TYPE" == "DHCP" ]; then
 298                 /sbin/iptables -A INPUT -p tcp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 299                 /sbin/iptables -A INPUT -p udp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 300         fi
 301         if [ "$PROTOCOL" == "RFC1483" -a "$METHOD" == "DHCP" ]; then
 302                 /sbin/iptables -A INPUT -p tcp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 303                 /sbin/iptables -A INPUT -p udp --source-port 67 --destination-port 68 -i $IFACE -j ACCEPT
 304         fi
 305
 306         # run local firewall configuration, if present
 307         if [ -x /etc/sysconfig/firewall.local ]; then
 308                 /etc/sysconfig/firewall.local stop
 309         fi
 310
 311         if [ "$DROPINPUT" == "on" ]; then
 312                 /sbin/iptables -A INPUT   -m limit --limit 10/minute -j LOG --log-prefix "DROP_INPUT "
 313         fi
 314         /sbin/iptables -A INPUT -j DROP -m comment --comment "DROP_INPUT"
 315         if [ "$DROPOUTPUT" == "on" ]; then
 316                 /sbin/iptables -A FORWARD -m limit --limit 10/minute -j LOG --log-prefix "DROP_OUTPUT "
 317         fi
 318         /sbin/iptables -A FORWARD -j DROP -m comment --comment "DROP_OUTPUT"
 319         ;;
 320   stopovpn)
 321         # stop openvpn
 322         /usr/local/bin/openvpnctrl --delete-chains-and-rules
 323         ;;
 324   reload)
 325         iptables_red
 326
 327         # run local firewall configuration, if present
 328         if [ -x /etc/sysconfig/firewall.local ]; then
 329                 /etc/sysconfig/firewall.local reload
 330         fi
 331         ;;
 332   restart)
 333         $0 stop
 334         $0 start
 335         ;;
 336   *)
 337         echo "Usage: $0 {start|stop|reload|restart}"
 338         exit 1
 339         ;;
 340 esac
 341
 342 exit 0