}
#
-## This function is responsible for downloading the configured snort ruleset.
+## This function is responsible for downloading the configured IDS ruleset.
##
-## * At first it obtains from the stored snortsettings which ruleset should be downloaded.
+## * At first it obtains from the stored rules settings which ruleset should be downloaded.
## * The next step is to get the download locations for all available rulesets.
## * After that, the function will check if an upstream proxy should be used and grab the settings.
## * The last step will be to generate the final download url, by obtaining the URL for the desired
## ruleset, add the settings for the upstream proxy and final grab the rules tarball from the server.
#
sub downloadruleset {
- # Get snort settings.
- my %snortsettings=();
- &General::readhash("$settingsdir/settings", \%snortsettings);
+ # Get rules settings.
+ my %rulessettings=();
+ &General::readhash("$rules_settings_file", \%rulessettings);
# Check if a ruleset has been configured.
- unless($snortsettings{'RULES'}) {
+ unless($rulessettings{'RULES'}) {
# Log that no ruleset has been configured and abort.
&_log_to_syslog("No ruleset source has been configured.");
}
# Grab the right url based on the configured vendor.
- my $url = $rulesetsources{$snortsettings{'RULES'}};
+ my $url = $rulesetsources{$rulessettings{'RULES'}};
# Check if the vendor requires an oinkcode and add it if needed.
- $url =~ s/\<oinkcode\>/$snortsettings{'OINKCODE'}/g;
+ $url =~ s/\<oinkcode\>/$rulessettings{'OINKCODE'}/g;
# Abort if no url could be determined for the vendor.
unless ($url) {
}
# Pass the requrested url to the downloader.
- my $request = HTTP::Request->new(HEAD => $url);
+ my $request = HTTP::Request->new(GET => $url);
# Accept the html header.
$request->header('Accept' => 'text/html');
# Check if there was any error.
unless ($response->is_success) {
# Obtain error.
- my $error = $response->content;
+ my $error = $response->status_line();
# Log error message.
&_log_to_syslog("Unable to download the ruleset. \($error\)");
}
# Assign the fetched header object.
- my $header = $response->headers;
+ my $header = $response->headers();
# Grab the remote file size from the object and store it in the
# variable.
# Close file.
close (ERRORFILE);
+
+ # Set correct ownership for the file.
+ &set_ownership("$storederrorfile");
}
#
# Loop through the array of available network zones.
foreach my $zone (@network_zones) {
- # Skip the red network - It never can be part to the home_net!
- next if($zone eq "red");
+ # Check if the current processed zone is red.
+ if($zone eq "red") {
+ # Grab the IP-address of the red interface.
+ my $red_address = &get_red_address();
+
+ # Check if an address has been obtained.
+ if ($red_address) {
+ # Generate full network string.
+ my $red_network = join("/", $red_address, "32");
+
+ # Add the red network to the array of networks.
+ push(@networks, $red_network);
+ }
+
+ # Check if the configured RED_TYPE is static.
+ if ($netsettings{'RED_TYPE'} eq "STATIC") {
+ # Get configured and enabled aliases.
+ my @aliases = &get_aliases();
- # Convert current zone name into upper case.
- $zone = uc($zone);
+ # Loop through the array.
+ foreach my $alias (@aliases) {
+ # Add "/32" prefix.
+ my $network = join("/", $alias, "32");
+
+ # Add the generated network to the array of networks.
+ push(@networks, $network);
+ }
+ }
+ # Process remaining network zones.
+ } else {
+ # Convert current zone name into upper case.
+ $zone = uc($zone);
- # Generate key to access the required data from the netsettings hash.
- my $zone_netaddress = $zone . "_NETADDRESS";
- my $zone_netmask = $zone . "_NETMASK";
+ # Generate key to access the required data from the netsettings hash.
+ my $zone_netaddress = $zone . "_NETADDRESS";
+ my $zone_netmask = $zone . "_NETMASK";
- # Obtain the settings from the netsettings hash.
- my $netaddress = $netsettings{$zone_netaddress};
- my $netmask = $netsettings{$zone_netmask};
+ # Obtain the settings from the netsettings hash.
+ my $netaddress = $netsettings{$zone_netaddress};
+ my $netmask = $netsettings{$zone_netmask};
- # Convert the subnetmask into prefix notation.
- my $prefix = &Network::convert_netmask2prefix($netmask);
+ # Convert the subnetmask into prefix notation.
+ my $prefix = &Network::convert_netmask2prefix($netmask);
- # Generate full network string.
- my $network = join("/", $netaddress,$prefix);
+ # Generate full network string.
+ my $network = join("/", $netaddress,$prefix);
- # Check if the network is valid.
- if(&Network::check_subnet($network)) {
- # Add the generated network to the array of networks.
- push(@networks, $network);
+ # Check if the network is valid.
+ if(&Network::check_subnet($network)) {
+ # Add the generated network to the array of networks.
+ push(@networks, $network);
+ }
}
}
}
}
+#
+## Function to generate the rules file with whitelisted addresses.
+#
+sub generate_ignore_file() {
+ my %ignored = ();
+
+ # SID range 1000000-1999999 Reserved for Local Use
+ # Put your custom rules in this range to avoid conflicts
+ my $sid = 1500000;
+
+ # Read-in ignoredfile.
+ &General::readhasharray($IDS::ignored_file, \%ignored);
+
+ # Open ignorefile for writing.
+ open(FILE, ">$IDS::whitelist_file") or die "Could not write to $IDS::whitelist_file. $!\n";
+
+ # Config file header.
+ print FILE "# Autogenerated file.\n";
+ print FILE "# All user modifications will be overwritten.\n\n";
+
+ # Add all user defined addresses to the whitelist.
+ #
+ # Check if the hash contains any elements.
+ if (keys (%ignored)) {
+ # Loop through the entire hash and write the host/network
+ # and remark to the ignore file.
+ while ( (my $key) = each %ignored) {
+ my $address = $ignored{$key}[0];
+ my $remark = $ignored{$key}[1];
+ my $status = $ignored{$key}[2];
+
+ # Check if the status of the entry is "enabled".
+ if ($status eq "enabled") {
+ # Check if the address/network is valid.
+ if ((&General::validip($address)) || (&General::validipandmask($address))) {
+ # Write rule line to the file to pass any traffic from this IP
+ print FILE "pass ip $address any -> any any (msg:\"pass all traffic from/to $address\"\; sid:$sid\;)\n";
+
+ # Increment sid.
+ $sid++;
+ }
+ }
+ }
+ }
+
+ close(FILE);
+}
+
+#
+## Function to set correct ownership for single files and directories.
+#
+
+sub set_ownership($) {
+ my ($target) = @_;
+
+ # User and group of the WUI.
+ my $uname = "nobody";
+ my $grname = "nobody";
+
+ # The chown function implemented in perl requies the user and group as nummeric id's.
+ my $uid = getpwnam($uname);
+ my $gid = getgrnam($grname);
+
+ # Check if the given target exists.
+ unless ($target) {
+ # Stop the script and print error message.
+ die "The $target does not exist. Cannot change the ownership!\n";
+ }
+
+ # Check weather the target is a file or directory.
+ if (-f $target) {
+ # Change ownership ot the single file.
+ chown($uid, $gid, "$target");
+ } elsif (-d $target) {
+ # Do a directory listing.
+ opendir(DIR, $target) or die $!;
+ # Loop through the direcory.
+ while (my $file = readdir(DIR)) {
+
+ # We only want files.
+ next unless (-f "$target/$file");
+
+ # Set correct ownership for the files.
+ chown($uid, $gid, "$target/$file");
+ }
+
+ closedir(DIR);
+
+ # Change ownership of the directory.
+ chown($uid, $gid, "$target");
+ }
+}
+
+#
+## Function to read-in the aliases file and returns all configured and enabled aliases.
+#
+sub get_aliases() {
+ # Location of the aliases file.
+ my $aliases_file = "${General::swroot}/ethernet/aliases";
+
+ # Array to store the aliases.
+ my @aliases;
+
+ # Check if the file is empty.
+ if (-z $aliases_file) {
+ # Abort nothing to do.
+ return;
+ }
+
+ # Open the aliases file.
+ open(ALIASES, $aliases_file) or die "Could not open $aliases_file. $!\n";
+
+ # Loop through the file content.
+ while (my $line = <ALIASES>) {
+ # Remove newlines.
+ chomp($line);
+
+ # Splitt line content into single chunks.
+ my ($address, $state, $remark) = split(/\,/, $line);
+
+ # Check if the state of the current processed alias is "on".
+ if ($state eq "on") {
+ # Check if the address is valid.
+ if(&Network::check_ip_address($address)) {
+ # Add the alias to the array of aliases.
+ push(@aliases, $address);
+ }
+ }
+ }
+
+ # Close file handle.
+ close(ALIASES);
+
+ # Return the array.
+ return @aliases;
+}
+
+#
+## Function to grab the current assigned IP-address on red.
+#
+sub get_red_address() {
+ # File, which contains the current IP-address of the red interface.
+ my $file = "${General::swroot}/red/local-ipaddress";
+
+ # Check if the file exists.
+ if (-e $file) {
+ # Open the given file.
+ open(FILE, "$file") or die "Could not open $file.";
+
+ # Obtain the address from the first line of the file.
+ my $address = <FILE>;
+
+ # Close filehandle
+ close(FILE);
+
+ # Remove newlines.
+ chomp $address;
+
+ # Check if the grabbed address is valid.
+ if (&General::validip($address)) {
+ # Return the address.
+ return $address;
+ }
+ }
+
+ # Return nothing.
+ return;
+}
+
1;