Run pakfire update/upgrade again after core38 updater has finished.

[ipfire-2.x.git] / config / rootfiles / core / 38 / update.sh

diff --git a/config/rootfiles/core/38/update.sh b/config/rootfiles/core/38/update.sh
index d15b829d16900bdad9bf6f81f54bb8ddf24226b9..1b1e86a6018bc17e3cfdbba8ad0e7f5d691165c1 100644 (file)
--- a/config/rootfiles/core/38/update.sh
+++ b/config/rootfiles/core/38/update.sh
@@ -24,7 +24,20 @@
 . /opt/pakfire/lib/functions.sh
 /usr/local/bin/backupctrl exclude >/dev/null 2>&1
 #
-KVER="2.6.32.12"
+OLDVERSION=`grep "version = " /opt/pakfire/etc/pakfire.conf | cut -d'"' -f2`
+#
+# Test if we running on xen
+#
+uname -r | grep "ipfire-xen";
+if [ ${?} = 0 ]; then
+       #Xen Kernel is active
+       NEWVERSION="2.7-xen"
+else
+       #Normal Kernel
+       NEWVERSION="2.7"
+fi
+#
+KVER="2.6.32.15"
 ROOT=`grep "root=" /boot/grub/grub.conf | cut -d"=" -f2 | cut -d" " -f1 | tail -n 1`
 MOUNT=`grep "kernel" /boot/grub/grub.conf | tail -n 1`
 # Nur den letzten Parameter verwenden
@@ -50,6 +63,14 @@ echo usr/lib/ipsec >> /opt/pakfire/tmp/ROOTFILES
 echo usr/libexec/ipsec >> /opt/pakfire/tmp/ROOTFILES
 tar cjvf /var/ipfire/backup/core-upgrade_$KVER.tar.bz2 \
     -C / -T /opt/pakfire/tmp/ROOTFILES --exclude='#*' > /dev/null 2>&1
+
+#
+# Stop Sevices
+#
+/etc/init.d/collectd stop
+/etc/init.d/squid stop
+/etc/init.d/ipsec stop
+
 echo
 echo Update Kernel to $KVER ...
 # Remove old kernel, configs, initrd, modules ...
@@ -58,26 +79,25 @@ rm -rf /boot/System.map-*
 rm -rf /boot/config-*
 rm -rf /boot/ipfirerd-*
 rm -rf /boot/vmlinuz-*
-# Don't remove old xen modules. Kernel may stored outside.
 rm -rf /lib/modules/*-ipfire
-
+# Don't remove all old xen modules. Kernel may stored outside.
+# only from 2.6.27.25 and 31
+rm -rf /lib/modules/2.6.27.25-ipfire-xen
+rm -rf /lib/modules/2.6.27.31-ipfire-xen
 #
 # remove openswan libs ...
 #
 rm -rf /usr/lib/ipsec
 rm -rf /usr/libexec/ipsec
 
-#
-# Stop Sevices
-#
-/etc/init.d/collectd stop
-/etc/init.d/squid stop
-
 #
 # Backup grub.conf
 #
 cp -vf /boot/grub/grub.conf /boot/grub/grub.conf.org
 #
+# Stop sysklogd
+/etc/init.d/sysklogd stop
+#
 # Unpack the updated files
 #
 echo
@@ -86,6 +106,10 @@ echo Unpack the updated files ...
 tar xvf /opt/pakfire/tmp/files --preserve --numeric-owner -C / \
        --no-overwrite-dir
 #
+# Start Sevices
+/etc/init.d/sysklogd start
+/etc/init.d/squid start
+#
 # Modify grub.conf
 #
 echo
@@ -135,10 +159,6 @@ grub-install --no-floppy ${ROOT::`expr length $ROOT`-1} --recheck
 #
 perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
 #
-# Delete old lm-sensor modullist...
-#
-rm -rf /etc/sysconfig/lm_sensors
-#
 # Cleanup Collectd statistics...
 #
 PRECLEAN=`du -sh /var/log/rrd/collectd`
@@ -155,10 +175,21 @@ rm -rf /var/log/rrd*/collectd/localhost/interface/if_packets*
 rm -rf /var/log/rrd*/collectd/localhost/disk-*/disk_merged*
 rm -rf /var/log/rrd*/collectd/localhost/disk-*/disk_ops*
 rm -rf /var/log/rrd*/collectd/localhost/disk-*/disk_time*
+#
+rm -rf /var/log/rrd*/collectd/localhost/iptables-filter-INPUT/*-DROP_Wirelessinput*
+rm -rf /var/log/rrd*/collectd/localhost/iptables-filter-FORWARD/*-DROP_Wirelessforward*
+rm -rf /var/log/rrd*/collectd/localhost/iptables-filter-OUTGOINGFW
 POSTCLEAN=`du -sh /var/log/rrd/collectd`
 #
 echo Cleaned up collectd directory from $PRECLEAN to $POSTCLEAN size.
 #
+# Start collectd
+/etc/init.d/collectd start
+#
+# Delete old lm-sensor modullist to force search at next boot
+#
+rm -rf /etc/sysconfig/lm_sensors
+#
 # USB Modeswitch conf now called setup, rename ...
 #
 if [ -e /etc/usb_modeswitch.conf ]; then
@@ -168,21 +199,64 @@ fi
 # rebuild qosscript if enabled...
 if [ -e /var/ipfire/qos/enable ]; then
        /usr/local/bin/qosctrl stop
-fi
-/usr/local/bin/qosctrl generate
-if [ -e /var/ipfire/qos/enable ]; then
+       /usr/local/bin/qosctrl generate
        /usr/local/bin/qosctrl start
 fi
 #
 #
-# Todo convert ipsec.conf from open to strongswan...
-#
-#
-# Start Sevices
-#
-/etc/init.d/squid start
+# convert ipsec.conf from openswan to strongswan...
+mv /var/ipfire/vpn/ipsec.conf /var/ipfire/vpn/ipsec.conf.org
+cat /var/ipfire/vpn/ipsec.conf.org | \
+grep -v "disablearrivalcheck=" | \
+grep -v "klipsdebug=" | \
+grep -v "leftfirewall=" | \
+grep -v "lefthostaccess=" | \
+grep -v "charonstart=" | \
+grep -v "aggrmode=" > /var/ipfire/vpn/ipsec.conf
+sed -i "s|ipsec[0-9]=||g" /var/ipfire/vpn/ipsec.conf
+sed -i "s|nat_t ||g" /var/ipfire/vpn/ipsec.conf
+sed -i "s|klips ||g" /var/ipfire/vpn/ipsec.conf
+sed -i "s|^conn [A-Za-z].*$|&\n\tleftfirewall=yes\n\tlefthostaccess=yes|g" /var/ipfire/vpn/ipsec.conf
+sed -i "s|^config setup$|&\n\tcharonstart=no|g" /var/ipfire/vpn/ipsec.conf
+chown nobody:nobody /var/ipfire/vpn/ipsec.conf
+chmod 644 /var/ipfire/vpn/ipsec.conf
+#
+# Add cryptodev to /etc/sysconfig/modules
+mv /etc/sysconfig/modules /etc/sysconfig/modules.org
+cat /etc/sysconfig/modules.org | \
+grep -v "cryptodev" | \
+grep -v "# End /etc/sysconfig/modules" > /etc/sysconfig/modules
+echo "" >> /etc/sysconfig/modules
+echo "### cryptodev" >> /etc/sysconfig/modules
+echo "#" >> /etc/sysconfig/modules
+echo "cryptodev" >> /etc/sysconfig/modules
+echo "" >> /etc/sysconfig/modules
+echo "# End /etc/sysconfig/modules" >> /etc/sysconfig/modules
+chmod 644 /etc/sysconfig/modules
+# Change version of Pakfire.conf
+#
+sed -i "s|$OLDVERSION|$NEWVERSION|g" /opt/pakfire/etc/pakfire.conf
+#
+# After pakfire has ended run it again and update the lists and do upgrade
+#
+echo '#!/bin/bash'                                        >  /tmp/pakfire_update
+echo 'while [ "$(ps -A | grep " update.sh")" != "" ]; do' >> /tmp/pakfire_update
+echo '    sleep 1'                                        >> /tmp/pakfire_update
+echo 'done'                                               >> /tmp/pakfire_update
+echo 'while [ "$(ps -A | grep " pakfire")" != "" ]; do'   >> /tmp/pakfire_update
+echo '    sleep 1'                                        >> /tmp/pakfire_update
+echo 'done'                                               >> /tmp/pakfire_update
+echo '/opt/pakfire/pakfire update -y --force'             >> /tmp/pakfire_update
+echo '/opt/pakfire/pakfire upgrade -y'                    >> /tmp/pakfire_update
+echo '/opt/pakfire/pakfire upgrade -y'                    >> /tmp/pakfire_update
+echo '/opt/pakfire/pakfire upgrade -y'                    >> /tmp/pakfire_update
+echo '/usr/bin/logger -p syslog.emerg -t core-upgrade-38 "Upgrade finished. If you use a customized grub.cfg"' >> /tmp/pakfire_update
+echo '/usr/bin/logger -p syslog.emerg -t core-upgrade-38 "Check it before reboot !!!"' >> /tmp/pakfire_update
+echo '/usr/bin/logger -p syslog.emerg -t core-upgrade-38 " *** Please reboot... *** "' >> /tmp/pakfire_update
+#
+chmod +x /tmp/pakfire_update
+/tmp/pakfire_update &
 #
-# This core-update need a reboot
-/usr/bin/logger -p syslog.emerg -t core-upgrade-38 "Upgrade finished. If you use a customized grub.cfg"
-/usr/bin/logger -p syslog.emerg -t core-upgrade-38 "Check it before reboot !!!"
-/usr/bin/logger -p syslog.emerg -t core-upgrade-38 " *** Please reboot... *** "
+echo
+echo Please wait until pakfire has ended...
+echo