Remove start and stop beep sounds.

[ipfire-2.x.git] / make.sh

diff --git a/make.sh b/make.sh
index e08f731d704e5b7f0849a007e8e47fc4b025634a..1679d3293a9f07fde8592187e3a2722809e6a084 100755 (executable)
--- a/make.sh
+++ b/make.sh
@@ -24,9 +24,9 @@
 
 NAME="IPFire"                                                  # Software name
 SNAME="ipfire"                                                 # Short name
-VERSION="2.9"                                                  # Version number
-CORE="52"                                                      # Core Level (Filename)
-PAKFIRE_CORE="51"                                              # Core Level (PAKFIRE)
+VERSION="2.11"                                                 # Version number
+CORE="53"                                                      # Core Level (Filename)
+PAKFIRE_CORE="52"                                              # Core Level (PAKFIRE)
 GIT_BRANCH=`git status | head -n1 | cut -d" " -f4`             # Git Branch
 SLOGAN="www.ipfire.org"                                                # Software slogan
 CONFIG_ROOT=/var/ipfire                                                # Configuration rootdir
@@ -286,6 +286,7 @@ buildtoolchain() {
     lfsmake1 tar
     lfsmake1 texinfo
     lfsmake1 util-linux
+    lfsmake1 strip
     lfsmake1 cleanup-toolchain PASS=2
     export PATH=$ORG_PATH
 }
@@ -352,11 +353,7 @@ buildbase() {
     lfsmake2 udev
     lfsmake2 util-linux
     lfsmake2 vim
-
-    # ARM cannot use grub.
-    if [ "${MACHINE_TYPE}" != "arm" ]; then
-      lfsmake2 grub
-    fi
+    lfsmake2 grub
 }
 
 buildipfire() {
@@ -375,6 +372,7 @@ buildipfire() {
   ipfiremake xz
   ipfiremake linux-firmware
   ipfiremake zd1211-firmware
+  ipfiremake u-boot
 
   # The xen and PAE kernels are only available for x86
   if [ "${MACHINE_TYPE}" != "arm" ]; then
@@ -413,18 +411,15 @@ buildipfire() {
   # Default kernel build
   ipfiremake linux
   ipfiremake v4l-dvb
-
-  if [ "${MACHINE_TYPE}" != "arm" ]; then
-    # Virtualization helpers are only available for x86.
-    ipfiremake kqemu
-    ipfiremake kvm-kmod
-    #unsupported arch (armv5)
-    ipfiremake madwifi
+  ipfiremake kqemu
+  ipfiremake kvm-kmod
+  ipfiremake madwifi
+  if [ "${MACHINE_TYPE}" = "arm" ]; then
     #todo enable alsa driver in kernel config
     ipfiremake alsa                    KMOD=1
-    #undefined declaration in echo canceler try to fix later
-    ipfiremake mISDN
   fi
+  #undefined declaration in echo canceler try to fix later
+  ipfiremake mISDN
   ipfiremake dahdi                     KMOD=1
   ipfiremake cryptodev
   ipfiremake compat-wireless
@@ -437,9 +432,6 @@ buildipfire() {
   ipfiremake pkg-config
   ipfiremake linux-atm
   ipfiremake cpio
-
-  installmake strip
-
   ipfiremake dracut
   ipfiremake expat
   ipfiremake gdbm
@@ -481,7 +473,7 @@ buildipfire() {
   ipfiremake arping
   ipfiremake beep
   ipfiremake bind
-  ipfiremake cdrtools
+  ipfiremake dvdrtools
   ipfiremake dnsmasq
   ipfiremake dosfstools
   ipfiremake reiserfsprogs
@@ -566,7 +558,6 @@ buildipfire() {
   ipfiremake wireless
   ipfiremake libsafe
   ipfiremake pakfire
-  ipfiremake java
   ipfiremake spandsp
   ipfiremake lzo
   ipfiremake openvpn
@@ -614,6 +605,7 @@ buildipfire() {
   ipfiremake rsync
   ipfiremake tcpwrapper
   ipfiremake libevent
+  ipfiremake libevent2
   ipfiremake portmap
   ipfiremake nfs
   ipfiremake nmap
@@ -637,8 +629,8 @@ buildipfire() {
   ipfiremake igmpproxy
   ipfiremake fbset
   ipfiremake sdl
-  #ipfiremake qemu
-  #ipfiremake qemu-kqemu
+  ipfiremake qemu
+  ipfiremake qemu-kqemu
   ipfiremake sane
   ipfiremake netpbm
   ipfiremake phpSANE
@@ -653,7 +645,7 @@ buildipfire() {
   ipfiremake faad2
   ipfiremake ffmpeg
   ipfiremake videolan
-  #ipfiremake vdr
+  ipfiremake vdr
   ipfiremake w_scan
   ipfiremake icecast
   ipfiremake icegenerator
@@ -669,11 +661,9 @@ buildipfire() {
   ipfiremake wpa_supplicant
   ipfiremake hostapd
   ipfiremake urlgrabber
-  if [ "${MACHINE_TYPE}" != "arm" ]; then
-    ipfiremake syslinux
-  fi
+  ipfiremake syslinux
   ipfiremake tftpd
-  #ipfiremake cpufrequtils
+  ipfiremake cpufrequtils
   ipfiremake dbus
   ipfiremake bluetooth
   ipfiremake gutenprint
@@ -696,9 +686,7 @@ buildipfire() {
   ipfiremake perl-DBD-mysql
   ipfiremake cacti
   ipfiremake icecc
-  if [ "${MACHINE_TYPE}" != "arm" ]; then
-    ipfiremake openvmtools
-  fi
+  ipfiremake openvmtools
   ipfiremake nagiosql
   ipfiremake iftop
   ipfiremake motion
@@ -707,8 +695,8 @@ buildipfire() {
   ipfiremake watchdog
   ipfiremake libpri
   ipfiremake dahdi
-  #ipfiremake asterisk
-  #ipfiremake lcr
+  ipfiremake asterisk
+  ipfiremake lcr
   ipfiremake usb_modeswitch
   ipfiremake usb_modeswitch_data
   ipfiremake zerofree
@@ -726,14 +714,14 @@ buildipfire() {
   ipfiremake python-m2crypto
   ipfiremake wireless-regdb
   ipfiremake crda
-  ipfiremake libsatsolver
-  ipfiremake python-satsolver
+  ipfiremake libsolv
   ipfiremake python-distutils-extra
   ipfiremake python-lzma
   ipfiremake python-progressbar
   ipfiremake python-xattr
   ipfiremake intltool
   ipfiremake pakfire3-deps
+  ipfiremake transmission
   echo Build on $HOSTNAME > $BASEDIR/build/var/ipfire/firebuild
   cat /proc/version >> $BASEDIR/build/var/ipfire/firebuild
   echo >> $BASEDIR/build/var/ipfire/firebuild
@@ -743,7 +731,7 @@ buildipfire() {
   echo >> $BASEDIR/build/var/ipfire/firebuild
   cat /proc/cpuinfo >> $BASEDIR/build/var/ipfire/firebuild
   echo $PAKFIRE_CORE > $BASEDIR/build/opt/pakfire/db/core/mine
-  if [ "$GIT_BRANCH" = "master" ]; then
+  if [ "$GIT_BRANCH" = "next" ]; then
        echo "$NAME $VERSION - (Development Build: $GIT_LASTCOMMIT)" > $BASEDIR/build/etc/system-release
   else
        echo "$NAME $VERSION - $GIT_BRANCH" > $BASEDIR/build/etc/system-release
@@ -754,11 +742,9 @@ buildinstaller() {
   # Run installer scripts one by one
   LOGFILE="$BASEDIR/log/_build.installer.log"
   export LOGFILE
-  if [ "${MACHINE_TYPE}" != "arm" ]; then
-    ipfiremake as86
-    ipfiremake mbr
-    ipfiremake memtest
-  fi
+  ipfiremake as86
+  ipfiremake mbr
+  ipfiremake memtest
   ipfiremake installer
   cp -f $BASEDIR/doc/COPYING $BASEDIR/build/install/initrd/
   installmake strip
@@ -791,11 +777,13 @@ buildpackages() {
   $0 git log
 
   # Create images for install
-       ipfiremake cdrom ED=$IPFVER
+  ipfiremake cdrom ED=$IPFVER
 
   # Check if there is a loop device for building in virtual environments
-  if [ $BUILD_IMAGES == 1 ] &&  ([ -e /dev/loop/0 ] || [ -e /dev/loop0 ]); then
-       ipfiremake usb-stick ED=$IPFVER
+  if [ $BUILD_IMAGES == 1 ] && ([ -e /dev/loop/0 ] || [ -e /dev/loop0 ]); then
+       if [ "${MACHINE_TYPE}" != "arm" ]; then
+               ipfiremake usb-stick ED=$IPFVER
+       fi
        ipfiremake flash-images ED=$IPFVER
   fi
 
@@ -858,7 +846,7 @@ ipfirepackages() {
 case "$1" in 
 build)
        clear
-       PACKAGE=`ls -v -r $BASEDIR/cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$BUILDMACHINE.tar.gz 2> /dev/null | head -n 1`
+       PACKAGE=`ls -v -r $BASEDIR/cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$MACHINE.tar.gz 2> /dev/null | head -n 1`
        #only restore on a clean disk
        if [ ! -f log/cleanup-toolchain-2-tools ]; then
                if [ ! -n "$PACKAGE" ]; then
@@ -949,7 +937,8 @@ downloadsrc)
                cd $BASEDIR/lfs
                for i in *; do
                        if [ -f "$i" -a "$i" != "Config" ]; then
-                               echo -ne "Loading $i"
+                               lfsmakecommoncheck ${i} || continue
+
                                make -s -f $i LFS_BASEDIR=$BASEDIR MACHINE=$MACHINE \
                                        MESSAGE="$i\t ($c/$MAX_RETRIES)" download >> $LOGFILE 2>&1
                                if [ $? -ne 0 ]; then
@@ -990,27 +979,27 @@ toolchain)
        prepareenv
        beautify build_stage "Toolchain compilation - Native GCC: `gcc --version | grep GCC | awk {'print $3'}`"
        buildtoolchain
-       echo "`date -u '+%b %e %T'`: Create toolchain tar.gz for $BUILDMACHINE" | tee -a $LOGFILE
+       echo "`date -u '+%b %e %T'`: Create toolchain tar.gz for $MACHINE" | tee -a $LOGFILE
        test -d $BASEDIR/cache/toolchains || mkdir -p $BASEDIR/cache/toolchains
-       cd $BASEDIR && tar -zc --exclude='log/_build.*.log' -f cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$BUILDMACHINE.tar.gz \
+       cd $BASEDIR && tar -zc --exclude='log/_build.*.log' -f cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$MACHINE.tar.gz \
                build/{bin,etc,usr/bin,usr/local} \
                build/tools/{bin,etc,*-linux-gnu*,include,lib,libexec,sbin,share,var} \
                log >> $LOGFILE
-       md5sum cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$BUILDMACHINE.tar.gz \
-               > cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$BUILDMACHINE.md5
+       md5sum cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$MACHINE.tar.gz \
+               > cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$MACHINE.md5
        stdumount
        ;;
 gettoolchain)
        # arbitrary name to be updated in case of new toolchain package upload
-       PACKAGE=$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$BUILDMACHINE
+       PACKAGE=$SNAME-$VERSION-toolchain-$TOOLCHAINVER-$MACHINE
        if [ ! -f $BASEDIR/cache/toolchains/$PACKAGE.tar.gz ]; then
                URL_TOOLCHAIN=`grep URL_TOOLCHAIN lfs/Config | awk '{ print $3 }'`
                test -d $BASEDIR/cache/toolchains || mkdir -p $BASEDIR/cache/toolchains
-               echo "`date -u '+%b %e %T'`: Load toolchain tar.gz for $BUILDMACHINE" | tee -a $LOGFILE
+               echo "`date -u '+%b %e %T'`: Load toolchain tar.gz for $MACHINE" | tee -a $LOGFILE
                cd $BASEDIR/cache/toolchains
                wget -U "IPFireSourceGrabber/2.x" $URL_TOOLCHAIN/$PACKAGE.tar.gz $URL_TOOLCHAIN/$PACKAGE.md5 >& /dev/null
                if [ $? -ne 0 ]; then
-                       echo "`date -u '+%b %e %T'`: error downloading $PACKAGE toolchain for $BUILDMACHINE machine" | tee -a $LOGFILE
+                       echo "`date -u '+%b %e %T'`: error downloading $PACKAGE toolchain for $MACHINE machine" | tee -a $LOGFILE
                else
                        if [ "`md5sum $PACKAGE.tar.gz | awk '{print $1}'`" = "`cat $PACKAGE.md5 | awk '{print $1}'`" ]; then
                                echo "`date -u '+%b %e %T'`: toolchain md5 ok" | tee -a $LOGFILE