# along with IPFire; if not, write to the Free Software #
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
# #
-# Copyright (C) 2007-2018 IPFire Team <info@ipfire.org>. #
+# Copyright (C) 2007-2019 IPFire Team <info@ipfire.org>. #
# #
############################################################################
#
NAME="IPFire" # Software name
SNAME="ipfire" # Short name
-VERSION="2.21" # Version number
-CORE="123" # Core Level (Filename)
-PAKFIRE_CORE="122" # Core Level (PAKFIRE)
+VERSION="2.23" # Version number
+CORE="130" # Core Level (Filename)
+PAKFIRE_CORE="129" # Core Level (PAKFIRE)
GIT_BRANCH=`git rev-parse --abbrev-ref HEAD` # Git Branch
SLOGAN="www.ipfire.org" # Software slogan
CONFIG_ROOT=/var/ipfire # Configuration rootdir
GIT_TAG=$(git tag | tail -1) # Git Tag
GIT_LASTCOMMIT=$(git log | head -n1 | cut -d" " -f2 |head -c8) # Last commit
-TOOLCHAINVER=20180606
+TOOLCHAINVER=20181030
###############################################################################
#
CXXFLAGS="${CFLAGS}"
# Determine parallelism
- if [ -z "${MAKETUNING}" ]; then
- # We assume that each process consumes about
- # 192MB of memory. Therefore we find out how
- # many processes fit into memory.
- local mem_max=$(( ${HOST_MEM} / 192 ))
-
- local processors="$(system_processors)"
- local cpu_max=$(( ${processors} + 1 ))
-
- local parallelism
- if [ ${mem_max} -lt ${cpu_max} ]; then
- parallelism=${mem_max}
- else
- parallelism=${cpu_max}
- fi
-
- # limit to -j23 because perl will not build
- # more
- if [ ${parallelism} -gt 23 ]; then
- parallelism=23
- fi
-
- MAKETUNING="-j${parallelism}"
+ # We assume that each process consumes about
+ # 128MB of memory. Therefore we find out how
+ # many processes fit into memory.
+ local mem_max=$(( ${SYSTEM_MEMORY} / 128 ))
+ local cpu_max=$(( ${SYSTEM_PROCESSORS} + 1 ))
+
+ local parallelism
+ if [ ${mem_max} -lt ${cpu_max} ]; then
+ parallelism=${mem_max}
+ else
+ parallelism=${cpu_max}
fi
+ # Use this as default PARALLELISM
+ DEFAULT_PARALLELISM="${parallelism}"
+
# Compression parameters
# We use mode 8 for reasonable memory usage when decompressing
# but with overall good compression
# We need to limit memory because XZ uses too much when running
# in parallel and it isn't very smart in limiting itself.
# We allow XZ to use up to 70% of all system memory.
- local xz_memory=$(( HOST_MEM * 7 / 10 ))
+ local xz_memory=$(( SYSTEM_MEMORY * 7 / 10 ))
# XZ memory cannot be larger than 2GB on 32 bit systems
case "${build_arch}" in
configure_build_guess() {
case "${HOST_ARCH}" in
- x86_64|i686|i586)
+ x86_64)
+ echo "x86_64"
+ ;;
+ i?86)
echo "i586"
;;
# Setup environment
set +h
LC_ALL=POSIX
- export LFS LC_ALL CFLAGS CXXFLAGS MAKETUNING
+ export LFS LC_ALL CFLAGS CXXFLAGS DEFAULT_PARALLELISM
unset CC CXX CPP LD_LIBRARY_PATH LD_PRELOAD
# Make some extra directories
CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
KVER="${KVER}" \
XZ_OPT="${XZ_OPT}" \
+ DEFAULT_PARALLELISM="${DEFAULT_PARALLELISM}" \
+ SYSTEM_PROCESSORS="${SYSTEM_PROCESSORS}" \
+ SYSTEM_MEMORY="${SYSTEM_MEMORY}" \
$(fake_environ) \
$(qemu_environ) \
"$@"
CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
CFLAGS="${CFLAGS}" \
CXXFLAGS="${CXXFLAGS}" \
- MAKETUNING="${MAKETUNING}" \
+ DEFAULT_PARALLELISM="${DEFAULT_PARALLELISM}" \
+ SYSTEM_PROCESSORS="${SYSTEM_PROCESSORS}" \
+ SYSTEM_MEMORY="${SYSTEM_MEMORY}" \
make -f $* \
TOOLCHAIN=1 \
TOOLS_DIR="${TOOLS_DIR}" \
enterchroot \
${EXTRA_PATH}bash -x -c "cd /usr/src/lfs && \
- MAKETUNING=${MAKETUNING} \
make -f $* \
LFS_BASEDIR=/usr/src install" \
>> ${LOGFILE} 2>&1 &
done | sort -u > "${path}/LINGUAS"
}
+contributors() {
+ local commits name
+
+ git shortlog --summary --numbered | while read -r commits name; do
+ echo "${name}"
+ done | grep -vE -e "^(alpha197|morlix|root|ummeegge)$" -e "via Development$" -e "@" -e "#$"
+}
+
+update_contributors() {
+ echo -n "Updating list of contributors"
+
+ local contributors="$(contributors | paste -sd , - | sed -e "s/,/&\\\\n/g")"
+
+ # Edit contributors into credits.cgi
+ awk -i inplace \
+ "/<!-- CONTRIBUTORS -->/{ p=1; print; printf \"${contributors}\n\"}/<!-- END -->/{ p=0 } !p" \
+ "${BASEDIR}/html/cgi-bin/credits.cgi"
+
+ print_status DONE
+ return 0
+}
+
# Load configuration file
if [ -f .config ]; then
. .config
unset TARGET_ARCH
fi
-# Get the amount of memory in this build system
-HOST_MEM=$(system_memory)
+# Get some information about the host system
+SYSTEM_PROCESSORS="$(system_processors)"
+SYSTEM_MEMORY="$(system_memory)"
if [ -n "${BUILD_ARCH}" ]; then
configure_build "${BUILD_ARCH}"
lfsmake2 readline
lfsmake2 readline-compat
lfsmake2 bzip2
+ lfsmake2 xz
lfsmake2 pcre
lfsmake2 pcre-compat
lfsmake2 bash
lfsmake2 util-linux
lfsmake2 udev
lfsmake2 vim
- lfsmake2 xz
- lfsmake2 paxctl
}
buildipfire() {
lfsmake2 configroot
lfsmake2 initscripts
lfsmake2 backup
+ lfsmake2 openssl
+ [ "${BUILD_ARCH}" = "i586" ] && lfsmake2 openssl KCFG='-sse2'
lfsmake2 popt
+ lfsmake2 libedit
lfsmake2 libusb
lfsmake2 libusb-compat
lfsmake2 libpcap
lfsmake2 xr819-firmware
lfsmake2 zd1211-firmware
lfsmake2 rpi-firmware
+ lfsmake2 intel-microcode
lfsmake2 bc
lfsmake2 u-boot MKIMAGE=1
lfsmake2 cpio
lfsmake2 mdadm
lfsmake2 dracut
+ lfsmake2 libaio
lfsmake2 lvm2
lfsmake2 multipath-tools
lfsmake2 freetype
lfsmake2 linux-initrd KCFG="-multi"
;;
esac
- lfsmake2 intel-microcode
lfsmake2 xtables-addons USPACE="1"
- lfsmake2 openssl
- [ "${BUILD_ARCH}" = "i586" ] && lfsmake2 openssl KCFG='-sse2'
- lfsmake2 openssl-compat
lfsmake2 libgpg-error
lfsmake2 libgcrypt
lfsmake2 libassuan
lfsmake2 nettle
+ lfsmake2 json-c
+ lfsmake2 libconfig
lfsmake2 libevent
lfsmake2 libevent2
lfsmake2 expat
lfsmake2 attr
lfsmake2 acl
lfsmake2 libcap
+ lfsmake2 libcap-ng
lfsmake2 pciutils
lfsmake2 usbutils
lfsmake2 libxml2
lfsmake2 setserial
lfsmake2 setup
lfsmake2 libdnet
- lfsmake2 daq
- lfsmake2 snort
+ lfsmake2 yaml
+ lfsmake2 libhtp
+ lfsmake2 suricata
lfsmake2 oinkmaster
+ lfsmake2 ids-ruleset-sources
lfsmake2 squid
lfsmake2 squidguard
lfsmake2 calamaris
lfsmake2 dbus
lfsmake2 intltool
lfsmake2 libdaemon
+ lfsmake2 avahi
lfsmake2 cups
lfsmake2 lcms2
lfsmake2 ghostscript
lfsmake2 flac
lfsmake2 lame
lfsmake2 sox
+ lfsmake2 soxr
lfsmake2 libshout
lfsmake2 xvid
lfsmake2 libmpeg2
lfsmake2 rsync
lfsmake2 libtirpc
lfsmake2 rpcbind
+ lfsmake2 keyutils
lfsmake2 nfs
lfsmake2 gnu-netcat
lfsmake2 ncat
lfsmake2 nagios_nrpe
lfsmake2 nagios-plugins
lfsmake2 icinga
+ lfsmake2 observium-agent
lfsmake2 ebtables
lfsmake2 directfb
lfsmake2 faad2
+ lfsmake2 alac
lfsmake2 ffmpeg
lfsmake2 vdr
lfsmake2 vdr_streamdev
lfsmake2 mpd
lfsmake2 libmpdclient
lfsmake2 mpc
+ lfsmake2 perl-Net-CIDR-Lite
lfsmake2 perl-Net-SMTP-SSL
lfsmake2 perl-MIME-Base64
lfsmake2 perl-Authen-SASL
lfsmake2 python-progressbar
lfsmake2 python-xattr
lfsmake2 ddns
+ lfsmake2 python3-setuptools
+ lfsmake2 python3-setuptools-scm
+ lfsmake2 python3-six
+ lfsmake2 python3-dateutil
+ lfsmake2 python3-jmespath
+ lfsmake2 python3-colorama
+ lfsmake2 python3-docutils
+ lfsmake2 python3-yaml
+ lfsmake2 python3-s3transfer
+ lfsmake2 python3-rsa
+ lfsmake2 python3-pyasn1
+ lfsmake2 python3-botocore
+ lfsmake2 python3-llfuse
+ lfsmake2 python3-msgpack
+ lfsmake2 aws-cli
lfsmake2 transmission
lfsmake2 dpfhack
lfsmake2 lcd4linux
lfsmake2 lua
lfsmake2 dnsdist
lfsmake2 bird
+ lfsmake2 frr
lfsmake2 dmidecode
lfsmake2 mcelog
lfsmake2 rtpproxy
lfsmake2 mdns-repeater
lfsmake2 i2c-tools
lfsmake2 nss-myhostname
+ lfsmake2 dehydrated
+ lfsmake2 shairport-sync
+ lfsmake2 borgbackup
+ lfsmake2 knot
+ lfsmake2 spectre-meltdown-checker
+ lfsmake2 zabbix_agentd
+ lfsmake2 flashrom
+ lfsmake2 firmware-update
}
buildinstaller() {
rm -f $BASEDIR/ipfire-*
print_status DONE
;;
+docker)
+ # Build the docker image if it does not exist, yet
+ if ! docker images -a | grep -q ^ipfire-builder; then
+ if docker build -t ipfire-builder ${BASEDIR}/tools/docker; then
+ print_status DONE
+ else
+ print_status FAIL
+ exit 1
+ fi
+ fi
+
+ # Run the container and enter a shell
+ docker run -it --privileged -v "${BASEDIR}:/build" -w "/build" ipfire-builder bash -l
+ ;;
downloadsrc)
if [ ! -d $BASEDIR/cache ]; then
mkdir $BASEDIR/cache
update_language_list ${BASEDIR}/src/setup/po
print_status DONE
;;
+update-contributors)
+ update_contributors
+ ;;
*)
- echo "Usage: $0 {build|changelog|clean|gettoolchain|downloadsrc|shell|sync|toolchain}"
+ echo "Usage: $0 {build|changelog|clean|gettoolchain|downloadsrc|shell|sync|toolchain|update-contributors}"
cat doc/make.sh-usage
;;
esac
projects / ipfire-2.x.git / blobdiff