X-Git-Url: http://git.ipfire.org/?p=ipfire-2.x.git;a=blobdiff_plain;f=make.sh;h=aaaeb751e20d1e699d53154e046e82757bfe5e44;hp=b85910ad458f06b01510238fa4bbf8f65a28b7ef;hb=87b5f3711ba2e166a61fd521f7819f20e7f9eb14;hpb=2edff5e9700908a3c91a8f0a66862f420faefebd

diff --git a/make.sh b/make.sh
index b85910ad45..aaaeb751e2 100755
--- a/make.sh
+++ b/make.sh
@@ -25,8 +25,8 @@
 NAME="IPFire"							# Software name
 SNAME="ipfire"							# Short name
 VERSION="2.19"							# Version number
-CORE="119"							# Core Level (Filename)
-PAKFIRE_CORE="118"						# Core Level (PAKFIRE)
+CORE="121"							# Core Level (Filename)
+PAKFIRE_CORE="120"						# Core Level (PAKFIRE)
 GIT_BRANCH=`git rev-parse --abbrev-ref HEAD`			# Git Branch
 SLOGAN="www.ipfire.org"						# Software slogan
 CONFIG_ROOT=/var/ipfire						# Configuration rootdir
@@ -144,14 +144,14 @@ configure_build() {
 			BUILDTARGET="${build_arch}-unknown-linux-gnu"
 			CROSSTARGET="${build_arch}-cross-linux-gnu"
 			BUILD_PLATFORM="x86"
-			CFLAGS_ARCH="-m64 -mtune=generic"
+			CFLAGS_ARCH="-m64 -mindirect-branch=thunk -mfunction-return=thunk -mtune=generic"
 			;;
 
 		i586)
 			BUILDTARGET="${build_arch}-pc-linux-gnu"
 			CROSSTARGET="${build_arch}-cross-linux-gnu"
 			BUILD_PLATFORM="x86"
-			CFLAGS_ARCH="-march=i586 -mtune=generic -fomit-frame-pointer"
+			CFLAGS_ARCH="-march=i586 -mindirect-branch=thunk -mfunction-return=thunk -mtune=generic -fomit-frame-pointer"
 			;;
 
 		aarch64)
@@ -225,6 +225,30 @@ configure_build() {
 
 		MAKETUNING="-j${parallelism}"
 	fi
+
+	# Compression parameters
+	# We use mode 8 for reasonable memory usage when decompressing
+	# but with overall good compression
+	XZ_OPT="-8"
+
+	# We try to use as many cores as possible
+	XZ_OPT="${XZ_OPT} -T0"
+
+	# We need to limit memory because XZ uses too much when running
+	# in parallel and it isn't very smart in limiting itself.
+	# We allow XZ to use up to 70% of all system memory.
+	local xz_memory=$(( HOST_MEM * 7 / 10 ))
+
+	# XZ memory cannot be larger than 2GB on 32 bit systems
+	case "${build_arch}" in
+		i*86|armv*)
+			if [ ${xz_memory} -gt 2048 ]; then
+				xz_memory=2048
+			fi
+			;;
+	esac
+
+	XZ_OPT="${XZ_OPT} --memory=${xz_memory}MiB"
 }
 
 configure_build_guess() {
@@ -416,7 +440,7 @@ prepareenv() {
 
 	# Checking if running as root user
 	if [ $(id -u) -ne 0 ]; then
-			exiterror "Not building as root"
+			exiterror "root privileges required for building"
 	fi
 
 	# Checking for necessary temporary space
@@ -526,6 +550,7 @@ enterchroot() {
 		CCACHE_COMPRESS="${CCACHE_COMPRESS}" \
 		CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
 		KVER="${KVER}" \
+		XZ_OPT="${XZ_OPT}" \
 		$(fake_environ) \
 		$(qemu_environ) \
 		"$@"
@@ -1044,13 +1069,12 @@ buildipfire() {
   lfsmake2 unzip
   lfsmake2 which
   lfsmake2 linux-firmware
-  lfsmake2 ath10k-firmware
   lfsmake2 dvb-firmwares
-  lfsmake2 mt7601u-firmware
+  lfsmake2 xr819-firmware
   lfsmake2 zd1211-firmware
   lfsmake2 rpi-firmware
   lfsmake2 bc
-  lfsmake2 u-boot
+  lfsmake2 u-boot MKIMAGE=1
   lfsmake2 cpio
   lfsmake2 mdadm
   lfsmake2 dracut
@@ -1065,66 +1089,64 @@ buildipfire() {
   lfsmake2 libnetfilter_cthelper
   lfsmake2 libnetfilter_cttimeout
   lfsmake2 iptables
+  lfsmake2 screen
+  lfsmake2 elfutils
 
   case "${BUILD_ARCH}" in
 	x86_64)
 		lfsmake2 linux			KCFG=""
-		lfsmake2 backports			KCFG=""
-		lfsmake2 e1000e			KCFG=""
-		lfsmake2 igb				KCFG=""
-		lfsmake2 ixgbe			KCFG=""
+#		lfsmake2 backports			KCFG=""
+#		lfsmake2 e1000e			KCFG=""
+#		lfsmake2 igb				KCFG=""
+#		lfsmake2 ixgbe			KCFG=""
 		lfsmake2 xtables-addons		KCFG=""
 		lfsmake2 linux-initrd			KCFG=""
 		;;
 	i586)
 		# x86-pae (Native and new XEN) kernel build
 		lfsmake2 linux			KCFG="-pae"
-		lfsmake2 backports			KCFG="-pae"
-		lfsmake2 e1000e			KCFG="-pae"
-		lfsmake2 igb				KCFG="-pae"
-		lfsmake2 ixgbe			KCFG="-pae"
+#		lfsmake2 backports			KCFG="-pae"
+#		lfsmake2 e1000e			KCFG="-pae"
+#		lfsmake2 igb				KCFG="-pae"
+#		lfsmake2 ixgbe			KCFG="-pae"
 		lfsmake2 xtables-addons		KCFG="-pae"
 		lfsmake2 linux-initrd			KCFG="-pae"
 
 		# x86 kernel build
 		lfsmake2 linux			KCFG=""
-		lfsmake2 backports			KCFG=""
-		lfsmake2 e1000e			KCFG=""
-		lfsmake2 igb				KCFG=""
-		lfsmake2 ixgbe			KCFG=""
+#		lfsmake2 backports			KCFG=""
+#		lfsmake2 e1000e			KCFG=""
+#		lfsmake2 igb				KCFG=""
+#		lfsmake2 ixgbe			KCFG=""
 		lfsmake2 xtables-addons		KCFG=""
 		lfsmake2 linux-initrd			KCFG=""
 		;;
 
 	armv5tel)
-		# arm-rpi (Raspberry Pi) kernel build
-		lfsmake2 linux			KCFG="-rpi"
-		lfsmake2 backports			KCFG="-rpi"
-		lfsmake2 xtables-addons		KCFG="-rpi"
-		lfsmake2 linux-initrd			KCFG="-rpi"
+		# arm-kirkwood (Dreamplug, ICY-Box ...) kernel build
+		lfsmake2 linux			KCFG="-kirkwood"
+#		lfsmake2 backports			KCFG="-kirkwood"
+#		lfsmake2 e1000e			KCFG="-kirkwood"
+#		lfsmake2 igb				KCFG="-kirkwood"
+#		lfsmake2 ixgbe			KCFG="-kirkwood"
+		lfsmake2 xtables-addons		KCFG="-kirkwood"
+		lfsmake2 linux-initrd			KCFG="-kirkwood"
 
 		# arm multi platform (Panda, Wandboard ...) kernel build
 		lfsmake2 linux			KCFG="-multi"
-		lfsmake2 backports			KCFG="-multi"
-		lfsmake2 e1000e			KCFG="-multi"
-		lfsmake2 igb				KCFG="-multi"
-		lfsmake2 ixgbe			KCFG="-multi"
+#		lfsmake2 backports			KCFG="-multi"
+#		lfsmake2 e1000e			KCFG="-multi"
+#		lfsmake2 igb				KCFG="-multi"
+#		lfsmake2 ixgbe			KCFG="-multi"
 		lfsmake2 xtables-addons		KCFG="-multi"
 		lfsmake2 linux-initrd			KCFG="-multi"
-
-		# arm-kirkwood (Dreamplug, ICY-Box ...) kernel build
-		lfsmake2 linux			KCFG="-kirkwood"
-		lfsmake2 backports			KCFG="-kirkwood"
-		lfsmake2 e1000e			KCFG="-kirkwood"
-		lfsmake2 igb				KCFG="-kirkwood"
-		lfsmake2 ixgbe			KCFG="-kirkwood"
-		lfsmake2 xtables-addons		KCFG="-kirkwood"
-		lfsmake2 linux-initrd			KCFG="-kirkwood"
 		;;
   esac
+  lfsmake2 intel-microcode
   lfsmake2 xtables-addons			USPACE="1"
   lfsmake2 openssl
   [ "${BUILD_ARCH}" = "i586" ] && lfsmake2 openssl KCFG='-sse2'
+  lfsmake2 openssl-compat
   lfsmake2 libgpg-error
   lfsmake2 libgcrypt
   lfsmake2 libassuan
@@ -1253,7 +1275,6 @@ buildipfire() {
   lfsmake2 python-ipaddress
   lfsmake2 glib
   lfsmake2 GeoIP
-  lfsmake2 noip_updater
   lfsmake2 ntp
   lfsmake2 openssh
   lfsmake2 fontconfig
@@ -1302,7 +1323,7 @@ buildipfire() {
   lfsmake2 mc
   lfsmake2 wget
   lfsmake2 bridge-utils
-  lfsmake2 screen
+#  lfsmake2 screen
   lfsmake2 smartmontools
   lfsmake2 htop
   lfsmake2 chkconfig
@@ -1434,6 +1455,9 @@ buildipfire() {
   lfsmake2 powertop
   lfsmake2 parted
   lfsmake2 swig
+  lfsmake2 u-boot
+  lfsmake2 u-boot-kirkwood
+  lfsmake2 python-typing
   lfsmake2 python-m2crypto
   lfsmake2 wireless-regdb
   lfsmake2 crda
@@ -1463,7 +1487,6 @@ buildipfire() {
   lfsmake2 sendEmail
   lfsmake2 sysbench
   lfsmake2 strace
-  lfsmake2 elfutils
   lfsmake2 ltrace
   lfsmake2 ipfire-netboot
   lfsmake2 lcdproc
@@ -1492,7 +1515,6 @@ buildipfire() {
   lfsmake2 pigz
   lfsmake2 tmux
   lfsmake2 perl-Text-CSV_XS
-  lfsmake2 swconfig
   lfsmake2 haproxy
   lfsmake2 ipset
   lfsmake2 lua
@@ -1559,10 +1581,9 @@ buildpackages() {
   modprobe loop 2>/dev/null
   if [ $BUILD_IMAGES == 1 ] && ([ -e /dev/loop/0 ] || [ -e /dev/loop0 ] || [ -e "/dev/loop-control" ]); then
 	lfsmake2 flash-images
-	lfsmake2 flash-images SCON=1
   fi
 
-  mv $LFS/install/images/{*.iso,*.tgz,*.img.gz,*.bz2} $BASEDIR >> $LOGFILE 2>&1
+  mv $LFS/install/images/{*.iso,*.img.xz,*.bz2} $BASEDIR >> $LOGFILE 2>&1
 
   ipfirepackages
 
@@ -1574,7 +1595,7 @@ buildpackages() {
   # remove not useable iso on armv5tel (needed to build flash images)
   [ "${BUILD_ARCH}" = "armv5tel" ] && rm -rf *.iso
 
-  for i in `ls *.bz2 *.img.gz *.iso`; do
+  for i in `ls *.bz2 *.img.xz *.iso`; do
 	md5sum $i > $i.md5
   done
   cd $PWD
@@ -1765,8 +1786,8 @@ toolchain)
 	buildtoolchain
 	echo "`date -u '+%b %e %T'`: Create toolchain image for ${BUILD_ARCH}" | tee -a $LOGFILE
 	test -d $BASEDIR/cache/toolchains || mkdir -p $BASEDIR/cache/toolchains
-	cd $BASEDIR && XZ_OPT="-T0 -8" tar -Jc --exclude='log/_build.*.log' -f cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-${BUILD_ARCH}.tar.xz \
-		build/${TOOLS_DIR} build/bin/sh log >> $LOGFILE
+	cd $BASEDIR && tar -cf- --exclude='log/_build.*.log' build/${TOOLS_DIR} build/bin/sh log | xz ${XZ_OPT} \
+		> cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-${BUILD_ARCH}.tar.xz
 	md5sum cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-${BUILD_ARCH}.tar.xz \
 		> cache/toolchains/$SNAME-$VERSION-toolchain-$TOOLCHAINVER-${BUILD_ARCH}.md5
 	stdumount