-#
-# $Id: fstab,v 1.4 2006/02/11 15:42 ms Exp $
-#
-/dev/harddisk1 /boot ext3 nodev,nosuid,noatime,data=journal 1 2
-/dev/harddisk2 /var/log ext3 nodev,nosuid,noatime,data=journal 1 2
-/dev/harddisk4 / ext3 noatime 1 1
-none /proc proc defaults 0 0
-none /dev/pts devpts gid=5,mode=620 0 0
+# Begin /etc/fstab
+
+# file system mount-point type options dump fsck
+# order
+
+DEVICE1 /boot ext2 defaults 1 2
+DEVICE2 swap swap pri=1 0 0
+DEVICE3 / reiserfs defaults 1 1
+DEVICE4 /var reiserfs defaults 1 1
+proc /proc proc defaults 0 0
+sysfs /sys sysfs defaults 0 0
+devpts /dev/pts devpts gid=4,mode=620 0 0
+shm /dev/shm tmpfs defaults 0 0
+# End /etc/fstab
#
# IPFire inittab
#
+# Begin /etc/inittab
+
id:3:initdefault:
-l0:0:wait:/etc/rc.d/rc.halt halt
-l6:6:wait:/etc/rc.d/rc.halt reboot
+si::sysinit:/etc/rc.d/init.d/rc sysinit
-si::sysinit:/etc/rc.d/rc.sysinit
+l0:0:wait:/etc/rc.d/init.d/rc 0
+l1:S1:wait:/etc/rc.d/init.d/rc 1
+l2:2:wait:/etc/rc.d/init.d/rc 2
+l3:3:wait:/etc/rc.d/init.d/rc 3
+l4:4:wait:/etc/rc.d/init.d/rc 4
+l5:5:wait:/etc/rc.d/init.d/rc 5
+l6:6:wait:/etc/rc.d/init.d/rc 6
-# Trap CTRL-ALT-DELETE
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
su:S016:once:/sbin/sulogin
-# Run gettys in standard runlevels
1:2345:respawn:/sbin/agetty tty1 9600
2:2345:respawn:/sbin/agetty tty2 9600
3:2345:respawn:/sbin/agetty tty3 9600
5:2345:respawn:/sbin/agetty tty5 9600
6:2345:respawn:/sbin/agetty tty6 9600
-# Going single user mode for maintenance
-xx:S1:respawn:/bin/bash
+# End /etc/inittab
#etc/rc.d/rc.red
#etc/rc.d/rc.sysinit
#etc/rc.d/rc.updatered
+etc/rc.d/init.d/checkfs
+etc/rc.d/init.d/cleanfs
+etc/rc.d/init.d/console
+etc/rc.d/init.d/functions
+etc/rc.d/init.d/halt
+etc/rc.d/init.d/localnet
+etc/rc.d/init.d/modules
+etc/rc.d/init.d/mountfs
+etc/rc.d/init.d/mountkernfs
+etc/rc.d/init.d/rc
+etc/rc.d/init.d/reboot
+etc/rc.d/init.d/sendsignals
+etc/rc.d/init.d/setclock
+etc/rc.d/init.d/swap
+etc/rc.d/init.d/sysctl
+etc/rc.d/init.d/sysklogd
+etc/rc.d/init.d/template
+etc/rc.d/init.d/udev
+etc/rc.d/init.d/udev_retry
+etc/rc.d/rc0.d/K90sysklogd
+etc/rc.d/rc0.d/S60sendsignals
+etc/rc.d/rc0.d/S70mountfs
+etc/rc.d/rc0.d/S80swap
+etc/rc.d/rc0.d/S90localnet
+etc/rc.d/rc0.d/S99halt
+etc/rc.d/rc1.d/K90sysklogd
+etc/rc.d/rc2.d/K90sysklogd
+etc/rc.d/rc3.d/S10sysklogd
+etc/rc.d/rc4.d/S10sysklogd
+etc/rc.d/rc5.d/S10sysklogd
+etc/rc.d/rc6.d/K90sysklogd
+etc/rc.d/rc6.d/S60sendsignals
+etc/rc.d/rc6.d/S70mountfs
+etc/rc.d/rc6.d/S80swap
+etc/rc.d/rc6.d/S90localnet
+etc/rc.d/rc6.d/S99reboot
+etc/rc.d/rcsysinit.d/S00mountkernfs
+etc/rc.d/rcsysinit.d/S05modules
+etc/rc.d/rcsysinit.d/S10udev
+etc/rc.d/rcsysinit.d/S20swap
+etc/rc.d/rcsysinit.d/S30checkfs
+etc/rc.d/rcsysinit.d/S40mountfs
+etc/rc.d/rcsysinit.d/S45udev_retry
+etc/rc.d/rcsysinit.d/S50cleanfs
+etc/rc.d/rcsysinit.d/S60setclock
+etc/rc.d/rcsysinit.d/S70console
+etc/rc.d/rcsysinit.d/S80localnet
+etc/rc.d/rcsysinit.d/S90sysctl
+etc/sysconfig/createfiles
+etc/sysconfig/modules
+etc/sysconfig/rc
+etc/sysconfig/clock
+etc/sysconfig/network
#usr/share/terminfo/l/layer
#usr/share/terminfo/l/lft
#usr/share/terminfo/l/lft-pc850
-#usr/share/terminfo/l/linux
-#usr/share/terminfo/l/linux-basic
+usr/share/terminfo/l/linux
+usr/share/terminfo/l/linux-basic
#usr/share/terminfo/l/linux-c
#usr/share/terminfo/l/linux-c-nc
#usr/share/terminfo/l/linux-koi8
#usr/share/terminfo/l/linux-koi8r
-#usr/share/terminfo/l/linux-lat
-#usr/share/terminfo/l/linux-m
-#usr/share/terminfo/l/linux-nic
-#usr/share/terminfo/l/linux-vt
+usr/share/terminfo/l/linux-lat
+usr/share/terminfo/l/linux-m
+usr/share/terminfo/l/linux-nic
+usr/share/terminfo/l/linux-vt
#usr/share/terminfo/l/lisa
#usr/share/terminfo/l/lisaterm
#usr/share/terminfo/l/lisaterm-w
#usr/share/terminfo/x/xnuppc-m-f
#usr/share/terminfo/x/xnuppc-m-f2
#usr/share/terminfo/x/xtalk
-#usr/share/terminfo/x/xterm
-#usr/share/terminfo/x/xterm#pcfkeys
-#usr/share/terminfo/x/xterm#sl
-#usr/share/terminfo/x/xterm#sl-twm
+usr/share/terminfo/x/xterm
+usr/share/terminfo/x/xterm+pcfkeys
+#usr/share/terminfo/x/xterm+sl
+#usr/share/terminfo/x/xterm+sl-twm
#usr/share/terminfo/x/xterm-1002
#usr/share/terminfo/x/xterm-1003
#usr/share/terminfo/x/xterm-16color
#usr/share/terminfo/x/xterm-24
-#usr/share/terminfo/x/xterm-256color
-#usr/share/terminfo/x/xterm-88color
+usr/share/terminfo/x/xterm-256color
+usr/share/terminfo/x/xterm-88color
#usr/share/terminfo/x/xterm-8bit
#usr/share/terminfo/x/xterm-basic
#usr/share/terminfo/x/xterm-bold
#usr/share/terminfo/x/xterm-r6
#usr/share/terminfo/x/xterm-sco
#usr/share/terminfo/x/xterm-sun
-#usr/share/terminfo/x/xterm-vt220
-#usr/share/terminfo/x/xterm-vt52
+usr/share/terminfo/x/xterm-vt220
+usr/share/terminfo/x/xterm-vt52
#usr/share/terminfo/x/xterm-xf86-v32
#usr/share/terminfo/x/xterm-xf86-v33
#usr/share/terminfo/x/xterm-xf86-v333
bin/kill
bin/ps
lib/libproc-3.2.6.so
-#sbin/sysctl
+sbin/sysctl
usr/bin/free
#usr/bin/pgrep
#usr/bin/pkill
--- /dev/null
+usr/local/sbin/setup
--- /dev/null
+#etc/slsh.rc
+#usr/bin/slsh
+#usr/include/slang.h
+#usr/include/slcurses.h
+#usr/lib/libslang.a
+usr/lib/libslang.so
+usr/lib/libslang.so.2
+usr/lib/libslang.so.2.0.6
+#usr/lib/slang
+#usr/lib/slang/v2
+#usr/lib/slang/v2/modules
+#usr/lib/slang/v2/modules/fcntl-module.so
+#usr/lib/slang/v2/modules/pcre-module.so
+#usr/lib/slang/v2/modules/png-module.so
+#usr/lib/slang/v2/modules/select-module.so
+#usr/lib/slang/v2/modules/slsmg-module.so
+#usr/lib/slang/v2/modules/termios-module.so
+#usr/lib/slang/v2/modules/varray-module.so
+#usr/man/man1/slsh.1
+#usr/share/doc/slang
+#usr/share/doc/slang/v2
+#usr/share/doc/slang/v2/COPYING
+#usr/share/doc/slang/v2/changes.txt
+#usr/share/doc/slang/v2/cref.txt
+#usr/share/doc/slang/v2/cslang.txt
+#usr/share/doc/slang/v2/slang.txt
+#usr/share/doc/slang/v2/slangdoc.html
+#usr/share/doc/slang/v2/slangfun.txt
+#usr/share/slsh
+#usr/share/slsh/arrayfuns.sl
+#usr/share/slsh/autoload.sl
+#usr/share/slsh/cmaps
+#usr/share/slsh/cmaps/cool.map
+#usr/share/slsh/cmaps/copper.map
+#usr/share/slsh/cmaps/drywet.map
+#usr/share/slsh/cmaps/gebco.map
+#usr/share/slsh/cmaps/globe.map
+#usr/share/slsh/cmaps/gray.map
+#usr/share/slsh/cmaps/haxby.map
+#usr/share/slsh/cmaps/hot.map
+#usr/share/slsh/cmaps/jet.map
+#usr/share/slsh/cmaps/no_green.map
+#usr/share/slsh/cmaps/ocean.map
+#usr/share/slsh/cmaps/polar.map
+#usr/share/slsh/cmaps/rainbow.map
+#usr/share/slsh/cmaps/red2green.map
+#usr/share/slsh/cmaps/relief.map
+#usr/share/slsh/cmaps/sealand.map
+#usr/share/slsh/cmaps/seis.map
+#usr/share/slsh/cmaps/split.map
+#usr/share/slsh/cmaps/topo.map
+#usr/share/slsh/cmaps/wysiwyg.map
+#usr/share/slsh/fcntl.sl
+#usr/share/slsh/glob.sl
+#usr/share/slsh/help
+#usr/share/slsh/help/pcrefuns.hlp
+#usr/share/slsh/help/pngfuns.hlp
+#usr/share/slsh/local-packages
+#usr/share/slsh/pcre.sl
+#usr/share/slsh/png.sl
+#usr/share/slsh/print.sl
+#usr/share/slsh/profile.sl
+#usr/share/slsh/require.sl
+#usr/share/slsh/scripts
+#usr/share/slsh/scripts/jpegsize
+#usr/share/slsh/scripts/lsrpm
+#usr/share/slsh/scripts/sldb
+#usr/share/slsh/scripts/slprof
+#usr/share/slsh/scripts/svnsh
+#usr/share/slsh/select.sl
+#usr/share/slsh/sldb.sl
+#usr/share/slsh/sldbcore.sl
+#usr/share/slsh/slshrl.sl
+#usr/share/slsh/slsmg.sl
+#usr/share/slsh/stkcheck.sl
+#usr/share/slsh/structfuns.sl
+#usr/share/slsh/termios.sl
+#usr/share/slsh/varray.sl
-#bin/bash
-#bin/cat
-#bin/grep
-#bin/pwd
-#bin/stty
+bin/bash
+bin/cat
+bin/grep
+bin/pwd
+bin/stty
#boot
dev/null
dev/console
mnt
#opt
root
-sbin
+#sbin
#srv
+#sys
tmp
#usr/bin/perl
#usr/include
#var
var/cache
var/empty
-var/lib
-var/lib/locate
-var/lib/misc
+#var/lib
+#var/lib/locate
+#var/lib/misc
#var/local
var/lock
var/log
bin/mount
bin/umount
etc/fdprm
-#sbin/agetty
+sbin/agetty
sbin/blockdev
sbin/cfdisk
sbin/ctrlaltdel
* ibod
* iftop-0.17
* inetutils-1.4.2
+* initscripts_old
* ipac-ng-1.31
* ipaddr-1.2
* iproute2-2.6.16-060323
rm -f /tmp/ROOTFILES
tar -x -C /tmp -f /$(SNAME).tar
rm -f /$(SNAME).tar
+ mkdir /tmp/sys
cd /tmp && tar jcf /install/cdrom/$(SNAME)-$(VERSION).tbz2 * && rm -rf *
# Other files
$(TARGET) :
@$(PREBUILD)
- -mkdir -p /etc/rc.d/helper
- for i in $(DIR_SRC)/src/rc.d/* ; do \
- if [ -f $$i ]; then \
- sed "s+CONFIG_ROOT+$(CONFIG_ROOT)+g" $$i > /etc/rc.d/`basename $$i`; \
- fi; \
- done
- for i in $(DIR_SRC)/src/rc.d/helper/* ; do \
- if [ -f $$i ]; then \
- sed "s+CONFIG_ROOT+$(CONFIG_ROOT)+g" $$i > /etc/rc.d/helper/`basename $$i`; \
- fi; \
- done
- chmod -R 755 /etc/rc.d
- chgrp nobody /etc/rc.d/rc.red
- chmod 4750 /etc/rc.d/rc.red
- -mkdir -p /etc/boot.d
- cp -f $(DIR_SRC)/src/boot.d/* /etc/boot.d
+ # Make directories
+ install -d -m 755 /etc/rc.d/rc0.d
+ install -d -m 755 /etc/rc.d/rc1.d
+ install -d -m 755 /etc/rc.d/rc2.d
+ install -d -m 755 /etc/rc.d/rc3.d
+ install -d -m 755 /etc/rc.d/rc4.d
+ install -d -m 755 /etc/rc.d/rc5.d
+ install -d -m 755 /etc/rc.d/rc6.d
+ install -d -m 755 /etc/rc.d/rcsysinit.d
+ install -d -m 755 /etc/rc.d/init.d
+ install -d -m 755 /etc/sysconfig
+
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/checkfs /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/cleanfs /etc/rc.d/init.d/
+ install -m 644 $(DIR_SRC)/src/initscripts/init.d/functions /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/halt /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/console /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/localnet /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/modules /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/mountfs /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/mountkernfs /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/rc /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/reboot /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/sendsignals /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/setclock /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/sysklogd /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/swap /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/sysctl /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/template /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/udev /etc/rc.d/init.d/
+ install -m 754 $(DIR_SRC)/src/initscripts/init.d/udev_retry /etc/rc.d/init.d/
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc0.d/K90sysklogd
+ ln -sf ../init.d/sendsignals /etc/rc.d/rc0.d/S60sendsignals
+ ln -sf ../init.d/mountfs /etc/rc.d/rc0.d/S70mountfs
+ ln -sf ../init.d/swap /etc/rc.d/rc0.d/S80swap
+ ln -sf ../init.d/localnet /etc/rc.d/rc0.d/S90localnet
+ ln -sf ../init.d/halt /etc/rc.d/rc0.d/S99halt
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc1.d/K90sysklogd
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc2.d/K90sysklogd
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc3.d/S10sysklogd
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc4.d/S10sysklogd
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc5.d/S10sysklogd
+ ln -sf ../init.d/sysklogd /etc/rc.d/rc6.d/K90sysklogd
+ ln -sf ../init.d/sendsignals /etc/rc.d/rc6.d/S60sendsignals
+ ln -sf ../init.d/mountfs /etc/rc.d/rc6.d/S70mountfs
+ ln -sf ../init.d/swap /etc/rc.d/rc6.d/S80swap
+ ln -sf ../init.d/localnet /etc/rc.d/rc6.d/S90localnet
+ ln -sf ../init.d/reboot /etc/rc.d/rc6.d/S99reboot
+ ln -sf ../init.d/mountkernfs /etc/rc.d/rcsysinit.d/S00mountkernfs
+ ln -sf ../init.d/modules /etc/rc.d/rcsysinit.d/S05modules
+ ln -sf ../init.d/udev /etc/rc.d/rcsysinit.d/S10udev
+ ln -sf ../init.d/swap /etc/rc.d/rcsysinit.d/S20swap
+ ln -sf ../init.d/checkfs /etc/rc.d/rcsysinit.d/S30checkfs
+ ln -sf ../init.d/mountfs /etc/rc.d/rcsysinit.d/S40mountfs
+ ln -sf ../init.d/udev_retry /etc/rc.d/rcsysinit.d/S45udev_retry
+ ln -sf ../init.d/cleanfs /etc/rc.d/rcsysinit.d/S50cleanfs
+ ln -sf ../init.d/setclock /etc/rc.d/rcsysinit.d/S60setclock
+ ln -sf ../init.d/console /etc/rc.d/rcsysinit.d/S70console
+ ln -sf ../init.d/localnet /etc/rc.d/rcsysinit.d/S80localnet
+ ln -sf ../init.d/sysctl /etc/rc.d/rcsysinit.d/S90sysctl
+ install -m 644 $(DIR_SRC)/src/initscripts/sysconfig/createfiles /etc/sysconfig/
+ install -m 644 $(DIR_SRC)/src/initscripts/sysconfig/modules /etc/sysconfig/
+ install -m 644 $(DIR_SRC)/src/initscripts/sysconfig/rc /etc/sysconfig/
+ install -m 644 $(DIR_SRC)/src/initscripts/sysconfig/clock /etc/sysconfig/
+ install -m 644 $(DIR_SRC)/src/initscripts/sysconfig/network /etc/sysconfig/
+
+# -mkdir -p /etc/rc.d/helper
+# for i in $(DIR_SRC)/src/rc.d/* ; do \
+# if [ -f $$i ]; then \
+# sed "s+CONFIG_ROOT+$(CONFIG_ROOT)+g" $$i > /etc/rc.d/`basename $$i`; \
+# fi; \
+# done
+# for i in $(DIR_SRC)/src/rc.d/helper/* ; do \
+# if [ -f $$i ]; then \
+# sed "s+CONFIG_ROOT+$(CONFIG_ROOT)+g" $$i > /etc/rc.d/helper/`basename $$i`; \
+# fi; \
+# done
+# chmod -R 755 /etc/rc.d
+# chgrp nobody /etc/rc.d/rc.red
+# chmod 4750 /etc/rc.d/rc.red
+#
+# -mkdir -p /etc/boot.d
+# cp -f $(DIR_SRC)/src/boot.d/* /etc/boot.d
@$(POSTBUILD)
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar jxf $(DIR_DL)/$(DL_FILE)
ifeq "$(LFS_PASS)" "install"
- cd $(DIR_APP) && make DESTDIR=/install/initrd sbindir=/bin udevdir=/dev
- cd $(DIR_APP) && make DESTDIR=/install/initrd sbindir=/bin udevdir=/dev install
- rm -f /install/initrd/bin/udev* /install/initrd/usr/sbin/udev* /install/initrd/usr/bin/udev*
- cd $(DIR_APP) && install udevstart /install/initrd/bin
+ cd $(DIR_APP) && make DESTDIR=/install/initrd sbindir=/sbin udevdir=/dev
+ cd $(DIR_APP) && make DESTDIR=/install/initrd sbindir=/sbin udevdir=/dev install
+ rm -f /install/initrd/sbin/udev* /install/initrd/usr/sbin/udev* /install/initrd/usr/bin/udev*
+ cd $(DIR_APP) && install udevstart /install/initrd/sbin
cd /install/initrd/usr/share && rm -rf man
cd /install/initrd/dev && rm -f console
cd /install/initrd/dev && mknod -m 0600 console c 5 1
clear
if [ -f /usr/bin/mcedit ]; then
export EDITOR=/usr/bin/mcedit
- else
- if [ -f /usr/bin/nano ]; then
- export EDITOR=/usr/bin/nano
- fi
+ fi
+ if [ -f /usr/bin/nano ]; then
+ export EDITOR=/usr/bin/nano
fi
echo -ne "Selecting editor $EDITOR..."
beautify message DONE
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/checkfs
+#
+# Description : File System Check
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+# A. Luebke - luebke@users.sourceforge.net
+#
+# Version : 00.00
+#
+# Notes :
+#
+# Based on checkfs script from LFS-3.1 and earlier.
+#
+# From man fsck
+# 0 - No errors
+# 1 - File system errors corrected
+# 2 - System should be rebooted
+# 4 - File system errors left uncorrected
+# 8 - Operational error
+# 16 - Usage or syntax error
+# 32 - Fsck canceled by user request
+# 128 - Shared library error
+#
+#########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ if [ -f /fastboot ]; then
+ boot_mesg -n "/fastboot found, will not perform" ${INFO}
+ boot_mesg " file system checks as requested."
+ echo_ok
+ exit 0
+ fi
+
+ boot_mesg "Mounting root file system in read-only mode..."
+ mount -n -o remount,ro / >/dev/null
+ evaluate_retval
+
+ if [ ${?} != 0 ]; then
+ echo_failure
+ boot_mesg -n "FAILURE:\n\nCannot check root" ${FAILURE}
+ boot_mesg -n " filesystem because it could not be mounted"
+ boot_mesg -n " in read-only mode.\n\nAfter you"
+ boot_mesg -n " press Enter, this system will be"
+ boot_mesg -n " halted and powered off."
+ boot_mesg -n "\n\nPress enter to continue..." ${INFO}
+ boot_mesg "" ${NORMAL}
+ read ENTER
+ ${rc_base}/init.d/halt stop
+ fi
+
+ if [ -f /forcefsck ]; then
+ boot_mesg -n "/forcefsck found, forcing file" ${INFO}
+ boot_mesg " system checks as requested."
+ echo_ok
+ options="-f"
+ else
+ options=""
+ fi
+
+ boot_mesg "Checking file systems..."
+ # Note: -a option used to be -p; but this fails e.g.
+ # on fsck.minix
+ fsck ${options} -a -A -C -T 2>/dev/null
+ error_value=${?}
+
+ if [ "${error_value}" = 0 ]; then
+ echo_ok
+ fi
+
+ if [ "${error_value}" = 1 ]; then
+ echo_warning
+ boot_mesg -n "WARNING:\n\nFile system errors" ${WARNING}
+ boot_mesg -n " were found and have been corrected."
+ boot_mesg -n " You may want to double-check that"
+ boot_mesg -n " everything was fixed properly."
+ boot_mesg "" ${NORMAL}
+ fi
+
+ if [ "${error_value}" = 2 -o "${error_value}" = 3 ]; then
+ echo_warning
+ boot_mesg -n "WARNING:\n\nFile system errors" ${WARNING}
+ boot_mesg -n " were found and have been been"
+ boot_mesg -n " corrected, but the nature of the"
+ boot_mesg -n " errors require this system to be"
+ boot_mesg -n " rebooted.\n\nAfter you press enter,"
+ boot_mesg -n " this system will be rebooted"
+ boot_mesg -n "\n\nPress Enter to continue..." ${INFO}
+ boot_mesg "" ${NORMAL}
+ read ENTER
+ reboot -f
+ fi
+
+ if [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then
+ echo_failure
+ boot_mesg -n "FAILURE:\n\nFile system errors" ${FAILURE}
+ boot_mesg -n " were encountered that could not be"
+ boot_mesg -n " fixed automatically. This system"
+ boot_mesg -n " cannot continue to boot and will"
+ boot_mesg -n " therefore be halted until those"
+ boot_mesg -n " errors are fixed manually by a"
+ boot_mesg -n " System Administrator.\n\nAfter you"
+ boot_mesg -n " press Enter, this system will be"
+ boot_mesg -n " halted and powered off."
+ boot_mesg -n "\n\nPress Enter to continue..." ${INFO}
+ boot_mesg "" ${NORMAL}
+ read ENTER
+ ${rc_base}/init.d/halt stop
+ fi
+
+ if [ "${error_value}" -ge 16 ]; then
+ echo_failure
+ boot_mesg -n "FAILURE:\n\nUnexpected Failure" ${FAILURE}
+ boot_mesg -n " running fsck. Exited with error"
+ boot_mesg -n " code: ${error_value}."
+ boot_mesg "" ${NORMAL}
+ exit ${error_value}
+ fi
+ ;;
+ *)
+ echo "Usage: ${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/checkfs
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/cleanfs
+#
+# Description : Clean file system
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+# Function to create files/directory on boot.
+create_files() {
+ # Read in the configuration file.
+ exec 9>&0 < /etc/sysconfig/createfiles
+ while read name type perm usr grp dtype maj min junk
+ do
+
+ # Ignore comments and blank lines.
+ case "${name}" in
+ ""|\#*) continue ;;
+ esac
+
+ # Ignore existing files.
+ if [ ! -e "${name}" ]; then
+ # Create stuff based on its type.
+ case "${type}" in
+ dir)
+ mkdir "${name}"
+ ;;
+ file)
+ :> "${name}"
+ ;;
+ dev)
+ case "${dtype}" in
+ char)
+ mknod "${name}" c ${maj} ${min}
+ ;;
+ block)
+ mknod "${name}" b ${maj} ${min}
+ ;;
+ pipe)
+ mknod "${name}" p
+ ;;
+ *)
+ boot_mesg -n "\nUnknown device type: ${dtype}" ${WARNING}
+ boot_mesg "" ${NORMAL}
+ ;;
+ esac
+ ;;
+ *)
+ boot_mesg -n "\nUnknown type: ${type}" ${WARNING}
+ boot_mesg "" ${NORMAL}
+ continue
+ ;;
+ esac
+
+ # Set up the permissions, too.
+ chown ${usr}:${grp} "${name}"
+ chmod ${perm} "${name}"
+ fi
+ done
+ exec 0>&9 9>&-
+}
+
+case "${1}" in
+ start)
+ boot_mesg -n "Cleaning file systems:" ${INFO}
+
+ boot_mesg -n " /tmp" ${NORMAL}
+ cd /tmp &&
+ find . -xdev -mindepth 1 ! -name lost+found \
+ -delete || failed=1
+
+ boot_mesg -n " /var/lock" ${NORMAL}
+ cd /var/lock &&
+ find . -type f ! -newer /proc -exec rm -f {} \; || failed=1
+
+ boot_mesg " /var/run" ${NORMAL}
+ cd /var/run &&
+ find . ! -type d ! -name utmp ! -newer /proc \
+ -exec rm -f {} \; || failed=1
+ > /var/run/utmp
+ if grep -q '^utmp:' /etc/group ; then
+ chmod 664 /var/run/utmp
+ chgrp utmp /var/run/utmp
+ fi
+
+ (exit ${failed})
+ evaluate_retval
+
+ if egrep -qv '^(#|$)' /etc/sysconfig/createfiles 2>/dev/null; then
+ boot_mesg "Creating files and directories..."
+ create_files
+ evaluate_retval
+ fi
+ ;;
+ *)
+ echo "Usage: ${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/cleanfs
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/console
+#
+# Description : Sets keymap and screen font
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+# Alexander E. Patrakov
+#
+# Version : 00.03
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+# Native English speakers probably don't have /etc/sysconfig/console at all
+if [ -f /etc/sysconfig/console ]
+then
+ . /etc/sysconfig/console
+else
+ exit 0
+fi
+
+is_true() {
+ [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ]
+}
+
+failed=0
+trap failed=1 ERR
+
+case "${1}" in
+ start)
+ boot_mesg "Setting up Linux console..."
+ # There should be no bogus failures below this line!
+
+ # Figure out if a framebuffer console is used
+ [ -d /sys/class/graphics/fb0 ] && USE_FB=1 || USE_FB=0
+
+ # Figure out the command to set the console into the
+ # desired mode
+ is_true "${UNICODE}" &&
+ MODE_COMMAND="echo -en '\033%G' && kbd_mode -u" ||
+ MODE_COMMAND="echo -en '\033%@\033(K' && kbd_mode -a"
+
+ # On framebuffer consoles, font has to be set for each vt in
+ # UTF-8 mode. This doesn't hurt in non-UTF-8 mode also.
+
+ ! is_true "${USE_FB}" || [ -z "${FONT}" ] ||
+ MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}"
+
+ # Apply that command to all consoles mentioned in
+ # /etc/inittab. Important: in the UTF-8 mode this should
+ # happen before setfont, otherwise a kernel bug will
+ # show up and the unicode map of the font will not be
+ # used.
+ # FIXME: Fedora Core also initializes two spare consoles
+ # - do we want that?
+
+ for TTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab |
+ grep -o '\btty[[:digit:]]*\b'`
+ do
+ openvt -f -w -c ${TTY#tty} -- \
+ /bin/sh -c "${MODE_COMMAND}"
+ done
+
+ # Set the font (if not already set above) and the keymap
+ is_true "${USE_FB}" || [ -z "${FONT}" ] || setfont $FONT
+ [ -z "${KEYMAP}" ] || loadkeys ${KEYMAP} &>/dev/null
+ [ -z "${KEYMAP_CORRECTIONS}" ] ||
+ loadkeys ${KEYMAP_CORRECTIONS} &>/dev/null
+
+ # Linux kernel generates wrong bytes when composing
+ # in Unicode mode. That's why we disable dead keys in Unicode
+ # mode by default. If you need them, download and apply
+ # http://www.linuxfromscratch.org/~alexander/patches/linux-2.6.12.5-utf8_input-2.patch
+ # After patching, add "-m charset_of_your_keymap" to the FONT
+ # variable and set BROKEN_COMPOSE=false
+ # in /etc/sysconfig/console
+
+ [ -n "$BROKEN_COMPOSE" ] || BROKEN_COMPOSE="$UNICODE"
+ ! is_true "$BROKEN_COMPOSE" ||
+ echo "" | loadkeys -c &>/dev/null
+
+ # Convert the keymap from $LEGACY_CHARSET to UTF-8
+ [ -z "$LEGACY_CHARSET" ] ||
+ dumpkeys -c "$LEGACY_CHARSET" | loadkeys -u &>/dev/null
+
+ # If any of the commands above failed, the trap at the
+ # top would set $failed to 1
+ ( exit $failed )
+ evaluate_retval
+ ;;
+ *)
+ echo $"Usage:" "${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/console
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/functions
+#
+# Description : Run Level Control Functions
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes : With code based on Matthias Benkmann's simpleinit-msb
+# http://winterdrache.de/linux/newboot/index.html
+#
+########################################################################
+
+## Environmental setup
+# Setup default values for environment
+umask 022
+export PATH="/bin:/usr/bin:/sbin:/usr/sbin"
+
+# Signal sent to running processes to refresh their configuration
+RELOADSIG="HUP"
+
+# Number of seconds between STOPSIG and FALLBACK when stopping processes
+KILLDELAY="3"
+
+## Screen Dimensions
+# Find current screen size
+if [ -z "${COLUMNS}" ]; then
+ COLUMNS=$(stty size)
+ COLUMNS=${COLUMNS##* }
+fi
+
+# When using remote connections, such as a serial port, stty size returns 0
+if [ "${COLUMNS}" = "0" ]; then
+ COLUMNS=80
+fi
+
+## Measurements for positioning result messages
+COL=$((${COLUMNS} - 8))
+WCOL=$((${COL} - 2))
+
+## Set Cursor Position Commands, used via echo -e
+SET_COL="\\033[${COL}G" # at the $COL char
+SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
+CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
+
+## Set color commands, used via echo -e
+# Please consult `man console_codes for more information
+# under the "ECMA-48 Set Graphics Rendition" section
+#
+# Warning: when switching from a 8bit to a 9bit font,
+# the linux console will reinterpret the bold (1;) to
+# the top 256 glyphs of the 9bit font. This does
+# not affect framebuffer consoles
+NORMAL="\\033[0;39m" # Standard console grey
+SUCCESS="\\033[1;32m" # Success is green
+WARNING="\\033[1;33m" # Warnings are yellow
+FAILURE="\\033[1;31m" # Failures are red
+INFO="\\033[1;36m" # Information is light cyan
+BRACKET="\\033[1;34m" # Brackets are blue
+
+STRING_LENGTH="0" # the length of the current message
+
+#*******************************************************************************
+# Function - boot_mesg()
+#
+# Purpose: Sending information from bootup scripts to the console
+#
+# Inputs: $1 is the message
+# $2 is the colorcode for the console
+#
+# Outputs: Standard Output
+#
+# Dependencies: - sed for parsing strings.
+# - grep for counting string length.
+#
+# Todo:
+#*******************************************************************************
+boot_mesg()
+{
+ local ECHOPARM=""
+
+ while true
+ do
+ case "${1}" in
+ -n)
+ ECHOPARM=" -n "
+ shift 1
+ ;;
+ -*)
+ echo "Unknown Option: ${1}"
+ return 1
+ ;;
+ *)
+ break
+ ;;
+ esac
+ done
+
+ ## Figure out the length of what is to be printed to be used
+ ## for warning messges.
+ STRING_LENGTH="`echo "${1}" | sed \
+ -e 's,.,.,g' -e 'l 1' | grep -c \$`"
+
+ # Print the message to the screen
+ echo ${ECHOPARM} -e "${2}${1}"
+
+}
+
+boot_mesg_flush()
+{
+ # Reset STRING_LENGTH for next message
+ STRING_LENGTH="0"
+}
+
+boot_log()
+{
+ # Left in for backwards compatibility
+ echo -n ""
+}
+
+echo_ok()
+{
+ echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]"
+ echo -e "${NORMAL}"
+ boot_mesg_flush
+}
+
+echo_failure()
+{
+ echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]"
+ echo -e "${NORMAL}"
+ boot_mesg_flush
+}
+
+echo_warning()
+{
+ echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]"
+ echo -e "${NORMAL}"
+ boot_mesg_flush
+}
+
+print_error_msg()
+{
+ echo_failure
+ # $i is inherited by the rc script
+ boot_mesg -n "FAILURE:\n\nYou should not be reading this error message.\n\n" ${FAILURE}
+ boot_mesg -n " It means that an unforeseen error took"
+ boot_mesg -n " place in ${i}, which exited with a return value of"
+ boot_mesg " ${error_value}.\n"
+ boot_mesg_flush
+ boot_mesg -n "If you're able to track this"
+ boot_mesg -n " error down to a bug in one of the files provided by"
+ boot_mesg -n " the LFS book, please be so kind to inform us at"
+ boot_mesg " lfs-dev@linuxfromscratch.org.\n"
+ boot_mesg_flush
+ boot_mesg -n "Press Enter to continue..." ${INFO}
+ boot_mesg "" ${NORMAL}
+ read ENTER
+}
+
+check_script_status()
+{
+ # $i is inherited by the rc script
+ if [ ! -f ${i} ]; then
+ boot_mesg "${i} is not a valid symlink." ${WARNING}
+ echo_warning
+ continue
+ fi
+
+ if [ ! -x ${i} ]; then
+ boot_mesg "${i} is not executable, skipping." ${WARNING}
+ echo_warning
+ continue
+ fi
+}
+
+evaluate_retval()
+{
+ error_value="${?}"
+
+ if [ ${error_value} = 0 ]; then
+ echo_ok
+ else
+ echo_failure
+ fi
+
+ # This prevents the 'An Unexpected Error Has Occurred' from trivial
+ # errors.
+ return 0
+}
+
+print_status()
+{
+ if [ "${#}" = "0" ]; then
+ echo "Usage: ${0} {success|warning|failure}"
+ return 1
+ fi
+
+ case "${1}" in
+
+ success)
+ echo_ok
+ ;;
+
+ warning)
+ # Leave this extra case in because old scripts
+ # may call it this way.
+ case "${2}" in
+ running)
+ echo -e -n "${CURS_UP}"
+ echo -e -n "\\033[${STRING_LENGTH}G "
+ boot_mesg "Already running." ${WARNING}
+ echo_warning
+ ;;
+ not_running)
+ echo -e -n "${CURS_UP}"
+ echo -e -n "\\033[${STRING_LENGTH}G "
+ boot_mesg "Not running." ${WARNING}
+ echo_warning
+ ;;
+ not_available)
+ echo -e -n "${CURS_UP}"
+ echo -e -n "\\033[${STRING_LENGTH}G "
+ boot_mesg "Not available." ${WARNING}
+ echo_warning
+ ;;
+ *)
+ # This is how it is supposed to
+ # be called
+ echo_warning
+ ;;
+ esac
+ ;;
+
+ failure)
+ echo_failure
+ ;;
+
+ esac
+
+}
+
+reloadproc()
+{
+ if [ "${#}" = "0" ]; then
+ echo "Usage: reloadproc [{program}]"
+ exit 1
+ fi
+
+ getpids "${1}"
+
+ if [ -n "${pidlist}" ]; then
+ failure="0"
+ for pid in ${pidlist}
+ do
+ kill -"${RELOADSIG}" "${pid}" || failure="1"
+ done
+
+ (exit ${failure})
+ evaluate_retval
+
+ else
+ boot_mesg "Process ${1} not running." ${WARNING}
+ echo_warning
+ fi
+}
+
+statusproc()
+{
+ if [ "${#}" = "0" ]
+ then
+ echo "Usage: statusproc {program}"
+ exit 1
+ fi
+
+ getpids "${1}"
+
+ if [ -n "${pidlist}" ]; then
+ echo -e "${INFO}${base} is running with Process"\
+ "ID(s) ${pidlist}.${NORMAL}"
+ else
+ if [ -n "${base}" -a -e "/var/run/${base}.pid" ]; then
+ echo -e "${WARNING}${1} is not running but"\
+ "/var/run/${base}.pid exists.${NORMAL}"
+ else
+ if [ -n "${PIDFILE}" -a -e "${PIDFILE}" ]; then
+ echo -e "${WARNING}${1} is not running"\
+ "but ${PIDFILE} exists.${NORMAL}"
+ else
+ echo -e "${INFO}${1} is not running.${NORMAL}"
+ fi
+ fi
+ fi
+}
+
+# The below functions are documented in the LSB-generic 2.1.0
+
+#*******************************************************************************
+# Function - pidofproc [-s] [-p pidfile] pathname
+#
+# Purpose: This function returns one or more pid(s) for a particular daemon
+#
+# Inputs: -p pidfile, use the specified pidfile instead of pidof
+# pathname, path to the specified program
+#
+# Outputs: return 0 - Success, pid's in stdout
+# return 1 - Program is dead, pidfile exists
+# return 2 - Invalid or excessive number of arguments,
+# warning in stdout
+# return 3 - Program is not running
+#
+# Dependencies: pidof, echo, head
+#
+# Todo: Remove dependency on head
+# This depreciates getpids
+# Test changes to pidof
+#
+#*******************************************************************************
+pidofproc()
+{
+ local pidfile=""
+ local lpids=""
+ local silent=""
+ pidlist=""
+ while true
+ do
+ case "${1}" in
+ -p)
+ pidfile="${2}"
+ shift 2
+ ;;
+
+ -s)
+ # Added for legacy opperation of getpids
+ # eliminates several '> /dev/null'
+ silent="1"
+ shift 1
+ ;;
+ -*)
+ log_failure_msg "Unknown Option: ${1}"
+ return 2
+ ;;
+ *)
+ break
+ ;;
+ esac
+ done
+
+ if [ "${#}" != "1" ]; then
+ shift 1
+ log_failure_msg "Usage: pidofproc [-s] [-p pidfile] pathname"
+ return 2
+ fi
+
+ if [ -n "${pidfile}" ]; then
+ if [ ! -r "${pidfile}" ]; then
+ return 3 # Program is not running
+ fi
+
+ lpids=`head -n 1 ${pidfile}`
+ for pid in ${lpids}
+ do
+ if [ "${pid}" -ne "$$" -a "${pid}" -ne "${PPID}" ]; then
+ kill -0 "${pid}" > /dev/null &&
+ pidlist="${pidlist} ${pid}"
+ fi
+
+ if [ "${silent}" -ne "1" ]; then
+ echo "${pidlist}"
+ fi
+
+ test -z "${pidlist}" &&
+ # Program is dead, pidfile exists
+ return 1
+ # else
+ return 0
+ done
+
+ else
+ pidlist=`pidof -o $$ -o $PPID -x "$1"`
+ if [ "x${silent}" != "x1" ]; then
+ echo "${pidlist}"
+ fi
+
+ # Get provide correct running status
+ if [ -n "${pidlist}" ]; then
+ return 0
+ else
+ return 3
+ fi
+
+ fi
+
+ if [ "$?" != "0" ]; then
+ return 3 # Program is not running
+ fi
+}
+
+# This will ensure compatibility with previous LFS Bootscripts
+getpids()
+{
+ if [ -z "${PIDFILE}" ]; then
+ pidofproc -s -p "${PIDFILE}" $@
+ else
+ pidofproc -s $@
+ fi
+ base="${1##*/}"
+}
+
+#*******************************************************************************
+# Function - loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]
+#
+# Purpose: This runs the specified program as a daemon
+#
+# Inputs: -f, run the program even if it is already running
+# -n nicelevel, specifies a nice level. See nice(1).
+# -p pidfile, uses the specified pidfile
+# pathname, pathname to the specified program
+# args, arguments to pass to specified program
+#
+# Outputs: return 0 - Success
+# return 2 - Invalid of excessive number of arguments,
+# warning in stdout
+# return 4 - Program or service status is unknown
+#
+# Dependencies: nice
+#
+# Todo: LSB says this should be called start_daemon
+# LSB does not say that it should call evaluate_retval
+# It checks for PIDFILE, which is deprecated.
+# Will be removed after BLFS 6.0
+# loadproc returns 0 if program is already running, not LSB compliant
+#
+#*******************************************************************************
+loadproc()
+{
+ local pidfile=""
+ local forcestart=""
+ local nicelevel="10"
+
+# This will ensure compatibility with previous LFS Bootscripts
+ if [ -n "${PIDFILE}" ]; then
+ pidfile="${PIDFILE}"
+ fi
+
+ while true
+ do
+ case "${1}" in
+ -f)
+ forcestart="1"
+ shift 1
+ ;;
+ -n)
+ nicelevel="${2}"
+ shift 2
+ ;;
+ -p)
+ pidfile="${2}"
+ shift 2
+ ;;
+ -*)
+ log_failure_msg "Unknown Option: ${1}"
+ return 2 #invalid or excess argument(s)
+ ;;
+ *)
+ break
+ ;;
+ esac
+ done
+
+ if [ "${#}" = "0" ]; then
+ log_failure_msg "Usage: loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]"
+ return 2 #invalid or excess argument(s)
+ fi
+
+ if [ -z "${forcestart}" ]; then
+ if [ -z "${pidfile}" ]; then
+ pidofproc -s "${1}"
+ else
+ pidofproc -s -p "${pidfile}" "${1}"
+ fi
+
+ case "${?}" in
+ 0)
+ log_warning_msg "Unable to continue: ${1} is running"
+ return 0 # 4
+ ;;
+ 1)
+ log_warning_msg "Unable to continue: ${pidfile} exists"
+ return 0 # 4
+ ;;
+ 3)
+ ;;
+ *)
+ log_failure_msg "Unknown error code from pidofproc: ${?}"
+ return 4
+ ;;
+ esac
+ fi
+
+ nice -n "${nicelevel}" "${@}"
+ evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts
+ return 0
+}
+
+#*******************************************************************************
+# Function - killproc [-p pidfile] pathname [signal]
+#
+# Purpose:
+#
+# Inputs: -p pidfile, uses the specified pidfile
+# pathname, pathname to the specified program
+# signal, send this signal to pathname
+#
+# Outputs: return 0 - Success
+# return 2 - Invalid of excessive number of arguments,
+# warning in stdout
+# return 4 - Unknown Status
+#
+# Dependencies: kill
+#
+# Todo: LSB does not say that it should call evaluate_retval
+# It checks for PIDFILE, which is deprecated.
+# Will be removed after BLFS 6.0
+#
+#*******************************************************************************
+killproc()
+{
+ local pidfile=""
+ local killsig=""
+ pidlist=""
+
+# This will ensure compatibility with previous LFS Bootscripts
+ if [ -n "${PIDFILE}" ]; then
+ pidfile="${PIDFILE}"
+ fi
+
+ while true
+ do
+ case "${1}" in
+ -p)
+ pidfile="${2}"
+ shift 2
+ ;;
+ -*)
+ log_failure_msg "Unknown Option: ${1}"
+ return 2
+ ;;
+ *)
+ break
+ ;;
+ esac
+ done
+
+ if [ "${#}" = "2" ]; then
+ killsig="${2}"
+ elif [ "${#}" != "1" ]; then
+ shift 2
+ log_failure_msg "Usage: killproc [-p pidfile] pathname [signal]"
+ return 2
+ fi
+
+ if [ -z "${pidfile}" ]; then
+ pidofproc -s "${1}"
+ else
+ pidofproc -s -p "${pidfile}" "${1}"
+ fi
+
+ # Change....
+ if [ -n "${pidlist}" ]; then
+ for pid in ${pidlist}
+ do
+ kill -${killsig:-TERM} ${pid} 2>/dev/null
+ if [ -z "${killsig}" ]; then
+ # Wait up to 3 seconds, for ${pid} to terminate
+ local dtime=${KILLDELAY}
+ while [ "${dtime}" != "0" ]
+ do
+ kill -0 ${pid} 2>/dev/null || break
+ sleep 1
+ dtime=$(( ${dtime} - 1))
+ done
+ # If ${pid} is still running, kill it
+ kill -0 ${pid} 2>/dev/null && kill -KILL ${pid} 2>/dev/null
+ fi
+ done
+
+ if [ -z "${killsig}" ]; then
+ pidofproc -s "${1}"
+
+ # Program was terminated
+ if [ "$?" != "0" ]; then
+ # Pidfile Exists
+ if [ -f "${pidfile}" ]; then
+ rm -f "${pidfile}"
+ fi
+ echo_ok
+ return 0
+ else # Program is still running
+ echo_failure
+ return 4 # Unknown Status
+ fi
+ else
+ if [ -z "${pidfile}" ]; then
+ pidofproc -s "${1}"
+ else
+ pidofproc -s -p "${pidfile}" "${1}"
+ fi
+ fi
+
+ evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts
+
+ else
+ print_status warning not_running
+ fi
+}
+
+
+#*******************************************************************************
+# Function - log_success_msg "message"
+#
+# Purpose: Print a success message
+#
+# Inputs: $@ - Message
+#
+# Outputs: Text output to screen
+#
+# Dependencies: echo
+#
+# Todo: logging
+#
+#*******************************************************************************
+log_success_msg()
+{
+ echo -n -e "${BOOTMESG_PREFIX}${@}"
+ echo -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK ""${BRACKET}""]""${NORMAL}"
+ return 0
+}
+
+#*******************************************************************************
+# Function - log_failure_msg "message"
+#
+# Purpose: Print a failure message
+#
+# Inputs: $@ - Message
+#
+# Outputs: Text output to screen
+#
+# Dependencies: echo
+#
+# Todo: logging
+#
+#*******************************************************************************
+log_failure_msg() {
+ echo -n -e "${BOOTMESG_PREFIX}${@}"
+ echo -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL ""${BRACKET}""]""${NORMAL}"
+ return 0
+}
+
+#*******************************************************************************
+# Function - log_warning_msg "message"
+#
+# Purpose: print a warning message
+#
+# Inputs: $@ - Message
+#
+# Outputs: Text output to screen
+#
+# Dependencies: echo
+#
+# Todo: logging
+#
+#*******************************************************************************
+log_warning_msg() {
+ echo -n -e "${BOOTMESG_PREFIX}${@}"
+ echo -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN ""${BRACKET}""]""${NORMAL}"
+ return 0
+}
+
+# End $rc_base/init.d/functions
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/halt
+#
+# Description : Halt Script
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ stop)
+ halt -d -f -i -p
+ ;;
+ *)
+ echo "Usage: {stop}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/halt
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/localnet
+#
+# Description : Loopback device
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+. /etc/sysconfig/network
+
+case "${1}" in
+ start)
+ boot_mesg "Bringing up the loopback interface..."
+ ip addr add 127.0.0.1/8 label lo dev lo
+ ip link set lo up
+ evaluate_retval
+
+ boot_mesg "Setting hostname to ${HOSTNAME}..."
+ hostname ${HOSTNAME}
+ evaluate_retval
+ ;;
+
+ stop)
+ boot_mesg "Bringing down the loopback interface..."
+ ip link set lo down
+ evaluate_retval
+ ;;
+
+ restart)
+ ${0} stop
+ sleep 1
+ ${0} start
+ ;;
+
+ status)
+ echo "Hostname is: $(hostname)"
+ ip link show lo
+ ;;
+
+ *)
+ echo "Usage: ${0} {start|stop|restart|status}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/localnet
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/modules
+#
+# Description : Module auto-loading script
+#
+# Authors : Zack Winkles
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+# Assure that the kernel has module support.
+[ -e /proc/ksyms -o -e /proc/modules ] || exit 0
+
+case "${1}" in
+ start)
+
+ # If proc is mounted, find the current kernel
+ # message level
+ if [ -f /proc/sys/kernel/printk ]; then
+ prev_msg=`cat /proc/sys/kernel/printk | \
+ sed 'l 1' | sed -n '2~0p' | \
+ sed 's/\\\//'`
+ else
+ prev_msg="6"
+ fi
+
+ # Now set the message level to 1 so not to make too
+ # much noise when loading modules
+ dmesg -n 1
+
+ # Only try to load modules if the user has actually given us
+ # some modules to load.
+ if egrep -qv '^(#|$)' /etc/sysconfig/modules 2>/dev/null
+ then
+
+ # Read in the configuration file.
+ exec 9>&0 < /etc/sysconfig/modules
+
+ boot_mesg -n "Loading modules:" ${INFO}
+
+ while read module args
+ do
+ # Ignore comments and blank lines.
+ case "${module}" in
+ ""|\#*) continue ;;
+ esac
+
+ # Attempt to load the module, making
+ # sure to pass any arguments provided.
+ modprobe ${module} ${args} 2>&1 > /dev/null
+
+ # Print the module name if successful,
+ # otherwise take note.
+ if [ ${?} -eq 0 ]; then
+ boot_mesg -n " ${module}" ${NORMAL}
+ else
+ failedmod="${failedmod} ${module}"
+ fi
+ done
+
+ boot_mesg "" ${NORMAL}
+ # Print a message about successfully loaded
+ # modules on the correct line.
+ echo_ok
+
+ # Print a failure message with a list of any
+ # modules that may have failed to load.
+ if [ "${failedmod}" ]; then
+ boot_mesg "Failed to load modules:${failedmod}" ${FAILURE}
+ echo_failure
+ fi
+
+ exec 0>&9 9>&-
+
+ fi
+ # Set the kernel message level back to it's previous value.
+ dmesg -n "${prev_msg}"
+ ;;
+ *)
+ echo "Usage: ${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/modules
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/mountfs
+#
+# Description : File System Mount Script
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg "Remounting root file system in read-write mode..."
+ mount -n -o remount,rw / &>/dev/null
+ evaluate_retval
+
+ # Remove fsck-related file system watermarks.
+ rm -f /fastboot /forcefsck
+
+ boot_mesg "Recording existing mounts in /etc/mtab..."
+ > /etc/mtab
+ mount -f / || failed=1
+ mount -f /proc || failed=1
+ mount -f /sys || failed=1
+ (exit ${failed})
+ evaluate_retval
+
+ # This will mount all filesystems that do not have _netdev in
+ # their option list. _netdev denotes a network filesystem.
+ boot_mesg "Mounting remaining file systems..."
+ mount -a -O no_netdev &>/dev/null
+ evaluate_retval
+ ;;
+
+ stop)
+ boot_mesg "Unmounting all other currently mounted file systems..."
+ umount -a -d -r &>/dev/null
+ evaluate_retval
+ ;;
+
+ *)
+ echo "Usage: ${0} {start|stop}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/mountfs
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/mountkernfs
+#
+# Description : Mount proc and sysfs
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg -n "Mounting kernel-based file systems:" ${INFO}
+
+ if ! mountpoint /proc &> /dev/null; then
+ boot_mesg -n " /proc" ${NORMAL}
+ mount -n /proc || failed=1
+ fi
+
+ if ! mountpoint /sys &> /dev/null; then
+ boot_mesg -n " /sys" ${NORMAL}
+ mount -n /sys || failed=1
+ fi
+
+ boot_mesg "" ${NORMAL}
+
+ (exit ${failed})
+ evaluate_retval
+ ;;
+
+ *)
+ echo "Usage: ${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/mountkernfs
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/rc
+#
+# Description : Main Run Level Control Script
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+# This sets a few default terminal options.
+stty sane
+
+# These 3 signals will not cause our script to exit
+trap "" INT QUIT TSTP
+
+[ "${1}" != "" ] && runlevel=${1}
+
+if [ "${runlevel}" = "" ]; then
+ echo "Usage: ${0} <runlevel>" >&2
+ exit 1
+fi
+
+previous=${PREVLEVEL}
+[ "${previous}" = "" ] && previous=N
+
+if [ ! -d ${rc_base}/rc${runlevel}.d ]; then
+ boot_mesg "${rc_base}/rc${runlevel}.d does not exist." ${WARNING}
+ boot_mesg_flush
+ exit 1
+fi
+
+# Attempt to stop all service started by previous runlevel,
+# and killed in this runlevel
+if [ "${previous}" != "N" ]; then
+ for i in $(ls -v ${rc_base}/rc${runlevel}.d/K* 2> /dev/null)
+ do
+ check_script_status
+
+ suffix=${i#$rc_base/rc$runlevel.d/K[0-9][0-9]}
+ prev_start=$rc_base/rc$previous.d/S[0-9][0-9]$suffix
+ sysinit_start=$rc_base/rcsysinit.d/S[0-9][0-9]$suffix
+
+ if [ "${runlevel}" != "0" ] && [ "${runlevel}" != "6" ]; then
+ if [ ! -f ${prev_start} ] && [ ! -f ${sysinit_start} ]; then
+ boot_mesg -n "WARNING:\n\n${i} can't be" ${WARNING}
+ boot_mesg -n " executed because it was not"
+ boot_mesg -n " not started in the previous"
+ boot_mesg -n " runlevel (${previous})."
+ boot_mesg "" ${NORMAL}
+ boot_mesg_flush
+ continue
+ fi
+ fi
+ ${i} stop
+ error_value=${?}
+
+ if [ "${error_value}" != "0" ]; then
+ print_error_msg
+ fi
+ done
+fi
+
+#Start all functions in this runlevel
+for i in $( ls -v ${rc_base}/rc${runlevel}.d/S* 2> /dev/null)
+do
+ if [ "${previous}" != "N" ]; then
+ suffix=${i#$rc_base/rc$runlevel.d/S[0-9][0-9]}
+ stop=$rc_base/rc$runlevel.d/K[0-9][0-9]$suffix
+ prev_start=$rc_base/rc$previous.d/S[0-9][0-9]$suffix
+
+ [ -f ${prev_start} ] && [ ! -f ${stop} ] && continue
+ fi
+
+ check_script_status
+
+ case ${runlevel} in
+ 0|6)
+ ${i} stop
+ ;;
+ *)
+ ${i} start
+ ;;
+ esac
+ error_value=${?}
+
+ if [ "${error_value}" != "0" ]; then
+ print_error_msg
+ fi
+done
+
+# End $rc_base/init.d/rc
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/reboot
+#
+# Description : Reboot Scripts
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ stop)
+ boot_mesg "Restarting system..."
+ reboot -d -f -i
+ ;;
+
+ *)
+ echo "Usage: ${0} {stop}"
+ exit 1
+ ;;
+
+esac
+
+# End $rc_base/init.d/reboot
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/sendsignals
+#
+# Description : Sendsignals Script
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ stop)
+ boot_mesg "Sending all processes the TERM signal..."
+ killall5 -15
+ error_value=${?}
+
+ sleep ${KILLDELAY}
+
+ if [ "${error_value}" = 0 ]; then
+ echo_ok
+ else
+ echo_failure
+ fi
+
+ boot_mesg "Sending all processes the KILL signal..."
+ killall5 -9
+ error_value=${?}
+
+ sleep ${KILLDELAY}
+
+ if [ "${error_value}" = 0 ]; then
+ echo_ok
+ else
+ echo_failure
+ fi
+ ;;
+
+ *)
+ echo "Usage: ${0} {stop}"
+ exit 1
+ ;;
+
+esac
+
+# End $rc_base/init.d/sendsignals
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/setclock
+#
+# Description : Setting Linux Clock
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+. /etc/sysconfig/clock
+
+CLOCKPARAMS=
+
+case "${UTC}" in
+ yes|true|1)
+ CLOCKPARAMS="${CLOCKPARAMS} --utc"
+ ;;
+
+ no|false|0)
+ CLOCKPARAMS="${CLOCKPARAMS} --localtime"
+ ;;
+
+esac
+
+case ${1} in
+ start)
+ boot_mesg "Setting system clock..."
+ hwclock --hctosys ${CLOCKPARAMS} &>/dev/null
+ evaluate_retval
+ ;;
+
+ stop)
+ boot_mesg "Setting hardware clock..."
+ hwclock --systohc ${CLOCKPARAMS} &>/dev/null
+ evaluate_retval
+ ;;
+
+ *)
+ echo "Usage: ${0} {start}"
+ ;;
+
+esac
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/swap
+#
+# Description : Swap Control Script
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg "Activating all swap files/partitions..."
+ swapon -a
+ evaluate_retval
+ ;;
+
+ stop)
+ boot_mesg "Deactivating all swap files/partitions..."
+ swapoff -a
+ evaluate_retval
+ ;;
+
+ restart)
+ ${0} stop
+ sleep 1
+ ${0} start
+ ;;
+
+ status)
+ boot_mesg "Retrieving swap status." ${INFO}
+ echo_ok
+ echo
+ swapon -s
+ ;;
+
+ *)
+ echo "Usage: ${0} {start|stop|restart|status}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/swap
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/sysctl
+#
+# Description : File uses /etc/sysctl.conf to set kernel runtime
+# parameters
+#
+# Authors : Nathan Coulson (nathan@linuxfromscratch.org)
+# Matthew Burgress (matthew@linuxfromscratch.org)
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ if [ -f "/etc/sysctl.conf" ]; then
+ boot_mesg "Setting kernel runtime parameters..."
+ sysctl -q -p
+ evaluate_retval
+ fi
+ ;;
+
+ status)
+ sysctl -a
+ ;;
+
+ *)
+ echo "Usage: ${0} {start|status}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/sysctl
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/sysklogd
+#
+# Description : Sysklogd loader
+#
+# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg "Starting system log daemon..."
+ loadproc syslogd -m 0
+
+ boot_mesg "Starting kernel log daemon..."
+ loadproc klogd
+ ;;
+
+ stop)
+ boot_mesg "Stopping kernel log daemon..."
+ killproc klogd
+
+ boot_mesg "Stopping system log daemon..."
+ killproc syslogd
+ ;;
+
+ reload)
+ boot_mesg "Reloading system log daemon config file..."
+ reloadproc syslogd 1
+ ;;
+
+ restart)
+ ${0} stop
+ sleep 1
+ ${0} start
+ ;;
+
+ status)
+ statusproc syslogd
+ statusproc klogd
+ ;;
+
+ *)
+ echo "Usage: ${0} {start|stop|reload|restart|status}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/sysklogd
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/
+#
+# Description :
+#
+# Authors :
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg "Starting..."
+ loadproc
+ ;;
+
+ stop)
+ boot_mesg "Stopping..."
+ killproc
+ ;;
+
+ reload)
+ boot_mesg "Reloading..."
+ reloadproc
+ ;;
+
+ restart)
+ ${0} stop
+ sleep 1
+ ${0} start
+ ;;
+
+ status)
+ statusproc
+ ;;
+
+ *)
+ echo "Usage: ${0} {start|stop|reload|restart|status}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/udev
+#
+# Description : Udev cold-plugging script
+#
+# Authors : Zack Winkles, Alexander E. Patrakov
+#
+# Version : 00.02
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg "Populating /dev with device nodes..."
+ if ! grep -q '[[:space:]]sysfs' /proc/mounts; then
+ echo_failure
+ boot_mesg -n "FAILURE:\n\nUnable to create" ${FAILURE}
+ boot_mesg -n " devices without a SysFS filesystem"
+ boot_mesg -n "\n\nAfter you press Enter, this system"
+ boot_mesg -n " will be halted and powered off."
+ boot_mesg -n "\n\nPress Enter to continue..." ${INFO}
+ boot_mesg "" ${NORMAL}
+ read ENTER
+ /etc/rc.d/init.d/halt stop
+ fi
+
+ # Mount a temporary file system over /dev, so that any devices
+ # made or removed during this boot don't affect the next one.
+ # The reason we don't write to mtab is because we don't ever
+ # want /dev to be unavailable (such as by `umount -a').
+ mount -n -t tmpfs tmpfs /dev -o mode=755
+ if [ ${?} != 0 ]; then
+ echo_failure
+ boot_mesg -n "FAILURE:\n\nCannot mount a tmpfs" ${FAILURE}
+ boot_mesg -n " onto /dev, this system will be halted."
+ boot_mesg -n "\n\nAfter you press Enter, this system"
+ boot_mesg -n " will be halted and powered off."
+ boot_mesg -n "\n\nPress Enter to continue..." ${INFO}
+ boot_mesg "" ${NORMAL}
+ read ENTER
+ /etc/rc.d/init.d/halt stop
+ fi
+
+ # Udev handles uevents itself, so we don't need to have
+ # the kernel call out to any binary in response to them
+ echo > /proc/sys/kernel/hotplug
+
+ # Copy static device nodes to /dev
+ cp -a /lib/udev/devices/* /dev
+
+ # Start the udev daemon to continually watch for, and act on,
+ # uevents
+ /sbin/udevd --daemon
+
+ # Now traverse /sys in order to "coldplug" devices that have
+ # already been discovered
+ /sbin/udevtrigger
+
+ # Now wait for udevd to process the uevents we triggered
+ /sbin/udevsettle
+ evaluate_retval
+
+ ;;
+
+ *)
+ echo "Usage ${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/udev
--- /dev/null
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/udev_retry
+#
+# Description : Udev cold-plugging script (retry)
+#
+# Authors : Alexander E. Patrakov
+#
+# Version : 00.02
+#
+# Notes :
+#
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+case "${1}" in
+ start)
+ boot_mesg "Retrying failed uevents, if any..."
+ # Re-trigger the failed uevents in hope they will succeed now
+ # If there are none, the "No such file or directory" error
+ # goes to /dev/null
+ for file in /dev/.udev/failed/*/uevent ; do
+ echo "add" >"${file}"
+ done 2>/dev/null
+
+ # Now wait for udevd to process the uevents we triggered
+ /sbin/udevsettle
+ evaluate_retval
+ ;;
+
+ *)
+ echo "Usage ${0} {start}"
+ exit 1
+ ;;
+esac
+
+# End $rc_base/init.d/udev_retry
--- /dev/null
+# Begin /etc/sysconfig/clock
+
+UTC=1
+
+# End /etc/sysconfig/clock
--- /dev/null
+########################################################################
+# Begin /etc/sysconfig/createfiles
+#
+# Description : Createfiles script config file
+#
+# Authors :
+#
+# Version : 00.00
+#
+# Notes : The syntax of this file is as follows:
+# if type is equal to "file" or "dir"
+# <filename> <type> <permissions> <user> <group>
+# if type is equal to "dev"
+# <filename> <type> <permissions> <user> <group> <devtype> <major> <minor>
+#
+# <filename> is the name of the file which is to be created
+# <type> is either file, dir, or dev.
+# file creates a new file
+# dir creates a new directory
+# dev creates a new device
+# <devtype> is either block, char or pipe
+# block creates a block device
+# char creates a character deivce
+# pipe creates a pipe, this will ignore the <major> and <minor> fields
+# <major> and <minor> are the major and minor numbers used for the device.
+########################################################################
+
+# End /etc/sysconfig/createfiles
--- /dev/null
+########################################################################
+# Begin /etc/sysconfig/modules
+#
+# Description : Module auto-loading configuration
+#
+# Authors :
+#
+# Version : 00.00
+#
+# Notes : The syntax of this file is as follows:
+# <module> [<arg1> <arg2> ...]
+#
+# Each module should be on it's own line, and any options that you want
+# passed to the module should follow it. The line deliminator is either
+# a space or a tab.
+########################################################################
+
+# End /etc/sysconfig/modules
--- /dev/null
+HOSTNAME=ipfirebox
--- /dev/null
+########################################################################
+# Begin /etc/sysconfig/rc
+#
+# Description : rc script configuration
+#
+# Authors :
+#
+# Version : 00.00
+#
+# Notes :
+#
+########################################################################
+
+rc_base=/etc/rc.d
+rc_functions=${rc_base}/init.d/functions
+network_devices=/etc/sysconfig/network-devices
+
+# End /etc/sysconfig/rc
mysystem("/bin/mount -t proc none /harddisk/proc");
mysystem("/bin/mount --bind /dev /harddisk/dev");
+
+
/* if we detected SCSI then fixup */
- mysystem("/bin/probecntrl.sh");
+ /* doesn't really work cause it sometimes creates a ramdisk on ide systems */
+/* mysystem("/bin/probecntrl.sh");
if ((handle = fopen("/cntrldriver", "r")))
{
char *driver;
runcommandwithstatus(commandstring, ctr[TR_BUILDING_INITRD]);
mysystem("/bin/chroot /harddisk /bin/mv /boot/grub/scsigrub.conf /boot/grub/grub.conf");
}
- }
+ } */
/* Build cache lang file */
snprintf(commandstring, STRING_SIZE, "/bin/chroot /harddisk /usr/bin/perl -e \"require '" CONFIG_ROOT "/lang.pl'; &Lang::BuildCacheLang\"");
goto EXIT;
}
+ /* Update /etc/fstab */
+ replace( "/harddisk/etc/fstab", "DEVICE", hdparams.devnode);
+
/* Install bootsplash */
mysystem("/bin/installbootsplash.sh");
mysystem("umount /harddisk/proc");
mysystem("umount /harddisk/dev");
- sprintf(message, ctr[TR_CONGRATULATIONS_LONG],
- NAME, SNAME, SNAME, NAME, NAME, NAME);
- newtWinMessage(ctr[TR_CONGRATULATIONS], ctr[TR_OK], message);
+ if (!unattended) {
+ sprintf(message, ctr[TR_CONGRATULATIONS_LONG],
+ NAME, SNAME, SNAME, NAME, NAME, NAME);
+ newtWinMessage(ctr[TR_CONGRATULATIONS], ctr[TR_OK], message);
+ }
allok = 1;
projects / ipfire-2.x.git / commitdiff
