Kernel: Add initial support for compulab utilite.
authorStefan Schantl <stefan.schantl@ipfire.org>
Thu, 19 Dec 2013 20:15:30 +0000 (21:15 +0100)
committerStefan Schantl <stefan.schantl@ipfire.org>
Thu, 19 Dec 2013 20:15:30 +0000 (21:15 +0100)
lfs/linux
src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch [new file with mode: 0644]

index 86a64da..b787aac 100644 (file)
--- a/lfs/linux
+++ b/lfs/linux
@@ -170,6 +170,9 @@ ifeq "$(KCFG)" "-multi"
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0001-imx6qdl-wandboard-dts-backport.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0002-ARM-dts-imx6qdl-wandboard-add-gpio-lines-to-wandboar.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0003-ARM-dts-imx6qdl-wandboard-Add-support-for-i2c1.patch
+
+       # Patchset for Compulab Utilite.
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch
 endif
 
 ifeq "$(KCFG)" "-rpi"
diff --git a/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch b/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch
new file mode 100644 (file)
index 0000000..3d7f676
--- /dev/null
@@ -0,0 +1,96 @@
+Add initial support for cm-fx6 module.
+
+cm-fx6 is a module based on mx6q SoC with the following features:
+- Up to 4GB of DDR3
+- 1 LCD/DVI output port
+- 1 HDMI output port
+- 2 LVDS LCD ports
+- Gigabit Ethernet
+- Analog Audio
+- CAN
+- SATA
+- NAND
+- PCIE
+
+This patch allows to boot up the module, configures the serial console,
+the Ethernet adapter and the heartbeat led.
+
+cm-fx6 is embedded inside the Utilite computer.
+
+Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
+Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
+---
+
+Shawn, can this still be applied for 3.13 ?
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index f0895c5..7521a34 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
+       imx6dl-sabresd.dtb \
+       imx6dl-wandboard.dtb \
+       imx6q-arm2.dtb \
++      imx6q-cm-fx6.dtb \
+       imx6q-sabreauto.dtb \
+       imx6q-sabrelite.dtb \
+       imx6q-sabresd.dtb \
+diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
+new file mode 100644
+index 0000000..2419751
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
+@@ -0,0 +1,53 @@
++/*
++ * Copyright 2013 CompuLab Ltd.
++ *
++ * Author: Valentin Raevsky <valentin@compulab.co.il>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++
++/ {
++      model = "CompuLab CM-FX6";
++      compatible = "compulab,cm-fx6", "fsl,imx6q";
++
++      memory {
++              reg = <0x10000000 0x80000000>;
++      };
++
++      leds {
++              compatible = "gpio-leds";
++
++              heartbeat-led {
++                      label = "Heartbeat";
++                      gpios = <&gpio2 31 0>;
++                      linux,default-trigger = "heartbeat";
++              };
++      };
++};
++
++&fec {
++      pinctrl-names = "default";
++      pinctrl-0 = <&pinctrl_enet_1>;
++      phy-mode = "rgmii";
++      status = "okay";
++};
++
++&gpmi {
++      pinctrl-names = "default";
++      pinctrl-0 = <&pinctrl_gpmi_nand_1>;
++      status = "okay";
++};
++
++&uart4 {
++      pinctrl-names = "default";
++      pinctrl-0 = <&pinctrl_uart4_1>;
++      status = "okay";
++};