case "${1}" in
start)
- boot_mesg "Starting hostapd... "
mkdir -p /var/run/hostapd
- # enable wlan module of collectd
- sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
+ if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+
+ boot_mesg "Setting wlan $INTERFACE to Master mode... "
- # Set Atheros Cards to master mode
- if [ -d /proc/net/madwifi/ath0/ ]; then
+ # Set Atheros Cards to master mode
+ if [ -d /proc/net/madwifi/ath0/ ]; then
/usr/bin/wlanconfig ath0 destroy > /dev/null
- fi
- /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
- /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+ fi
- # Set other cards to master mode
- #/usr/sbin/iwconfig blue0 mode master
+ /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
+ /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+ # Set other cards to master mode
+ #/usr/sbin/iwconfig blue0 mode master
+ fi
+
if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
boot_mesg "Error! Can't set wlan master mode"
echo_failure;
exit 1;
else
+ # enable wlan module of collectd
+ sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
+
+ boot_mesg "Starting hostapd... "
/usr/sbin/iwconfig $INTERFACE channel $CHANNEL
/usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
/usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf </dev/tty12 >/dev/tty12 2>&1 &
evaluate_retval
fi
-
- # Bring blue up (but not at boot)
- if [ "$(basename $0)" == "hostapd" ]; then
-
- /etc/rc.d/init.d/networking/${INTERFACE//[0-9]/} start
-
- if [ -f /var/ipfire/dhcp/enable_${INTERFACE//[0-9]/} ]; then
- /etc/rc.d/init.d/dhcp restart
- fi
- fi
;;
stop)
boot_mesg "Stopping hostapd..."
- # Set Atheros Card to managed mode
- /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
- /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode sta > /dev/null
-
- # Set other cards to managed mode
- #/usr/sbin/iwconfig blue0 mode Managed
-
killproc /usr/bin/hostapd
evaluate_retval
;;
restart)
- boot_mesg "Stopping hostapd..."
- killproc /usr/bin/hostapd
- evaluate_retval
-
+ ${0} stop
sleep 1
-
- boot_mesg "Starting hostapd... "
- if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
- boot_mesg "Error! Card is not master"
- echo_failure;
- exit 1;
- else
- /usr/sbin/iwconfig $INTERFACE channel $CHANNEL
- /usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
- /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf </dev/tty12 >/dev/tty12 2>&1 &
- evaluate_retval
- fi
-
+ ${0} start
;;
status)