]> git.ipfire.org Git - ipfire-2.x.git/commitdiff
kernel: add patches for SFP support on NXP Layerscape/DPAA2 (arm64)
authorMathew McBride <matt@traverse.com.au>
Mon, 3 Oct 2022 06:20:17 +0000 (06:20 +0000)
committerPeter Müller <peter.mueller@ipfire.org>
Tue, 4 Oct 2022 14:45:19 +0000 (14:45 +0000)
These two patches are needed to support SFP's on NXP DPAA2 platforms
(e.g Traverse Ten64).

The deadlock issue patch was submitted upstream a while ago and
rejected, however I am not aware of any better solutions at present.

The 10G mode additions are part of mainline since 5.16.

These two .patches were sourced from our patchset over here:
https://gitlab.com/traversetech/traverse-kernel-patches/-/tree/lts-5-15/patches

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
lfs/linux
src/patches/linux/linux-5-15-arm64-dpaa2-add-support-for-10g-modes.patch [new file with mode: 0644]
src/patches/linux/linux-5.15-arm64-dpaa2-fix-lock-issue.patch [new file with mode: 0644]

index d35057b224d21cbe8e15ef0e7a283a681484247c..ae9745d53bbbe6b7879e225c21bb73b2e06f8db0 100644 (file)
--- a/lfs/linux
+++ b/lfs/linux
@@ -153,6 +153,9 @@ endif
 ifeq "$(BUILD_ARCH)" "aarch64"
        # Apply Arm-multiarch kernel patches.
        cd $(DIR_APP) && xzcat $(DIR_DL)/arm-multi-patches-$(ARM_PATCHES).patch.xz | patch -Np1
+       # Apply NXP DPAA2 specific patches
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux/linux-5.15-arm64-dpaa2-fix-lock-issue.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux/linux-5-15-arm64-dpaa2-add-support-for-10g-modes.patch
 endif
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux/linux-3.14.79-amba-fix.patch
 
diff --git a/src/patches/linux/linux-5-15-arm64-dpaa2-add-support-for-10g-modes.patch b/src/patches/linux/linux-5-15-arm64-dpaa2-add-support-for-10g-modes.patch
new file mode 100644 (file)
index 0000000..ef8d459
--- /dev/null
@@ -0,0 +1,39 @@
+From c314138bd045e050432158ab021160de3ba51c5e Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 30 Jan 2020 22:42:38 +0000
+Subject: [PATCH 2/4] net: dpaa2-mac: add support for more 10G modes
+
+Phylink documentation says:
+ * Note that the PHY may be able to transform from one connection
+ * technology to another, so, eg, don't clear 1000BaseX just
+ * because the MAC is unable to BaseX mode. This is more about
+ * clearing unsupported speeds and duplex settings. The port modes
+ * should not be cleared; phylink_set_port_modes() will help with this.
+
+So add the missing 10G modes.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+index 8fe32ed4f6dc..3be849cee47b 100644
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -140,6 +140,12 @@ static void dpaa2_mac_validate(struct phylink_config *config,
+       case PHY_INTERFACE_MODE_10GBASER:
+       case PHY_INTERFACE_MODE_USXGMII:
+               phylink_set(mask, 10000baseT_Full);
++              phylink_set(mask, 10000baseKR_Full);
++              phylink_set(mask, 10000baseCR_Full);
++              phylink_set(mask, 10000baseSR_Full);
++              phylink_set(mask, 10000baseLR_Full);
++              phylink_set(mask, 10000baseLRM_Full);
++              phylink_set(mask, 10000baseER_Full);
+               if (state->interface == PHY_INTERFACE_MODE_10GBASER)
+                       break;
+               phylink_set(mask, 5000baseT_Full);
+-- 
+2.30.1
+
diff --git a/src/patches/linux/linux-5.15-arm64-dpaa2-fix-lock-issue.patch b/src/patches/linux/linux-5.15-arm64-dpaa2-fix-lock-issue.patch
new file mode 100644 (file)
index 0000000..587821b
--- /dev/null
@@ -0,0 +1,81 @@
+From 3a39dbe0c0c41f8dba5246ce6e2c5c4bcd6ba661 Mon Sep 17 00:00:00 2001
+From: Ioana Ciornei <ioana.ciornei@nxp.com>
+Date: Thu, 21 Nov 2019 21:15:25 +0200
+Subject: [PATCH 1/4] dpaa2-eth: do not hold rtnl_lock on phylink_create() or
+ _destroy()
+
+The rtnl_lock should not be held when calling phylink_create() or
+phylink_destroy() since it leads to the deadlock listed below:
+
+[   18.656576]  rtnl_lock+0x18/0x20
+[   18.659798]  sfp_bus_add_upstream+0x28/0x90
+[   18.663974]  phylink_create+0x2cc/0x828
+[   18.667803]  dpaa2_mac_connect+0x14c/0x2a8
+[   18.671890]  dpaa2_eth_connect_mac+0x94/0xd8
+
+Fix this by moving the _lock() and _unlock() calls just outside of
+phylink_of_phy_connect() and phylink_disconnect_phy().
+
+Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
+Reported-by: Russell King <linux@armlinux.org.uk>
+Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 4 ++++
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+index 8b7a29e1e221..20e65053f036 100644
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4214,12 +4214,10 @@ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
+               dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
+               dpaa2_eth_update_tx_fqids(priv);
+-              rtnl_lock();
+               if (dpaa2_eth_has_mac(priv))
+                       dpaa2_eth_disconnect_mac(priv);
+               else
+                       dpaa2_eth_connect_mac(priv);
+-              rtnl_unlock();
+       }
+       return IRQ_HANDLED;
+@@ -4513,9 +4511,7 @@ static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev)
+ #endif
+       unregister_netdev(net_dev);
+-      rtnl_lock();
+       dpaa2_eth_disconnect_mac(priv);
+-      rtnl_unlock();
+       dpaa2_eth_dl_port_del(priv);
+       dpaa2_eth_dl_traps_unregister(priv);
+diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+index ae6d382d8735..8fe32ed4f6dc 100644
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -351,7 +351,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
+       if (mac->pcs)
+               phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
++      rtnl_lock();
+       err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
++      rtnl_unlock();
+       if (err) {
+               netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
+               goto err_phylink_destroy;
+@@ -372,7 +374,9 @@ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
+       if (!mac->phylink)
+               return;
++      rtnl_lock();
+       phylink_disconnect_phy(mac->phylink);
++      rtnl_unlock();
+       phylink_destroy(mac->phylink);
+       dpaa2_pcs_destroy(mac);
+ }
+-- 
+2.30.1
+