--- /dev/null
+###############################################################################
+## Monit control file
+###############################################################################
+##
+## Comments begin with a '#' and extend through the end of the line. Keywords
+## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
+##
+## Below you will find examples of some frequently used statements. For
+## information about the control file and a complete list of statements and
+## options, please have a look in the Monit manual.
+##
+##
+###############################################################################
+## Global section
+###############################################################################
+##
+## Start Monit in the background (run as a daemon):
+#
+set daemon 60 # check services at 1-minute intervals
+# with start delay 240 # optional: delay the first check by 4-minutes (by
+# # default Monit check immediately after Monit start)
+#
+#
+## Set syslog logging with the 'daemon' facility. If the FACILITY option is
+## omitted, Monit will use 'user' facility by default. If you want to log to
+## a standalone log file instead, specify the full path to the log file
+#
+set logfile syslog facility log_daemon
+#
+#
+## Set the location of the Monit lock file which stores the process id of the
+## running Monit instance. By default this file is stored in $HOME/.monit.pid
+#
+set pidfile /var/run/monit.pid
+#
+## Set the location of the Monit id file which stores the unique id for the
+## Monit instance. The id is generated and stored on first Monit start. By
+## default the file is placed in $HOME/.monit.id.
+#
+set idfile /var/lib/monit/id
+#
+## Set the location of the Monit state file which saves monitoring states
+## on each cycle. By default the file is placed in $HOME/.monit.state. If
+## the state file is stored on a persistent filesystem, Monit will recover
+## the monitoring state across reboots. If it is on temporary filesystem, the
+## state will be lost on reboot which may be convenient in some situations.
+#
+set statefile /var/lib/monit/state
+#
+## Set the list of mail servers for alert delivery. Multiple servers may be
+## specified using a comma separator. If the first mail server fails, Monit
+# will use the second mail server in the list and so on. By default Monit uses
+# port 25 - it is possible to override this with the PORT option.
+#
+# set mailserver mail.bar.baz, # primary mailserver
+# backup.bar.baz port 10025, # backup mailserver on port 10025
+# localhost # fallback relay
+#
+#
+## By default Monit will drop alert events if no mail servers are available.
+## If you want to keep the alerts for later delivery retry, you can use the
+## EVENTQUEUE statement. The base directory where undelivered alerts will be
+## stored is specified by the BASEDIR option. You can limit the queue size
+## by using the SLOTS option (if omitted, the queue is limited by space
+## available in the back end filesystem).
+#
+set eventqueue
+ basedir /var/lib/monit # set the base directory where events will be stored
+ slots 100 # optionally limit the queue size
+#
+#
+## Send status and events to M/Monit (for more informations about M/Monit
+## see http://mmonit.com/). By default Monit registers credentials with
+## M/Monit so M/Monit can smoothly communicate back to Monit and you don't
+## have to register Monit credentials manually in M/Monit. It is possible to
+## disable credential registration using the commented out option below.
+## Though, if safety is a concern we recommend instead using https when
+## communicating with M/Monit and send credentials encrypted.
+#
+# set mmonit http://monit:monit@192.168.1.10:8080/collector
+# # and register without credentials # Don't register credentials
+#
+#
+## Monit by default uses the following format for alerts if the the mail-format
+## statement is missing::
+## --8<--
+## set mail-format {
+## from: monit@$HOST
+## subject: monit alert -- $EVENT $SERVICE
+## message: $EVENT Service $SERVICE
+## Date: $DATE
+## Action: $ACTION
+## Host: $HOST
+## Description: $DESCRIPTION
+##
+## Your faithful employee,
+## Monit
+## }
+## --8<--
+##
+## You can override this message format or parts of it, such as subject
+## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
+## are expanded at runtime. For example, to override the sender, use:
+#
+# set mail-format { from: monit@foo.bar }a
+#
+#
+## You can set alert recipients whom will receive alerts if/when a
+## service defined in this file has errors. Alerts may be restricted on
+## events by using a filter as in the second example below.
+#
+# set alert sysadm@foo.bar # receive all alerts
+## Do not alert when Monit start, stop or perform a user initiated action.
+## This filter is recommended to avoid getting alerts for trivial cases
+# set alert your-name@your.domain not on { instance, action }
+#
+#
+## Monit has an embedded web server which can be used to view status of
+## services monitored and manage services from a web interface. See the
+## Monit Wiki if you want to enable SSL for the web server.
+#
+set httpd port 2812 and
+ use address localhost # only accept connection from localhost
+ allow localhost # allow localhost to connect to the server and
+# allow admin:monit # require user 'admin' with password 'monit'
+# allow @monit # allow users of group 'monit' to connect (rw)
+# allow @users readonly # allow users of group 'users' to connect readonly
+
+###############################################################################
+## Services
+###############################################################################
+##
+## Check general system resources such as load average, cpu and memory
+## usage. Each test specifies a resource, conditions and the action to be
+## performed should a test fail.
+#
+# check system myhost.mydomain.tld
+# if loadavg (1min) > 4 then alert
+# if loadavg (5min) > 2 then alert
+# if memory usage > 75% then alert
+# if swap usage > 25% then alert
+# if cpu usage (user) > 70% then alert
+# if cpu usage (system) > 30% then alert
+# if cpu usage (wait) > 20% then alert
+#
+#
+## Check if a file exists, checksum, permissions, uid and gid. In addition
+## to alert recipients in the global section, customized alert can be sent to
+## additional recipients by specifying a local alert handler. The service may
+## be grouped using the GROUP option. More than one group can be specified by
+## repeating the 'group name' statement.
+#
+# check file apache_bin with path /usr/local/apache/bin/httpd
+# if failed checksum and
+# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
+# if failed permission 755 then unmonitor
+# if failed uid root then unmonitor
+# if failed gid root then unmonitor
+# alert security@foo.bar on {
+# checksum, permission, uid, gid, unmonitor
+# } with the mail-format { subject: Alarm! }
+# group server
+#
+#
+## Check that a process is running, in this case Apache, and that it respond
+## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory,
+## and number of children. If the process is not running, Monit will restart
+## it by default. In case the service is restarted very often and the
+## problem remains, it is possible to disable monitoring using the TIMEOUT
+## statement. This service depends on another service (apache_bin) which
+## is defined above.
+#
+# check process apache with pidfile /usr/local/apache/logs/httpd.pid
+# start program = "/etc/init.d/httpd start" with timeout 60 seconds
+# stop program = "/etc/init.d/httpd stop"
+# if cpu > 60% for 2 cycles then alert
+# if cpu > 80% for 5 cycles then restart
+# if totalmem > 200.0 MB for 5 cycles then restart
+# if children > 250 then restart
+# if loadavg(5min) greater than 10 for 8 cycles then stop
+# if failed host www.tildeslash.com port 80 protocol http
+# and request "/somefile.html"
+# then restart
+# if failed port 443 type tcpssl protocol http
+# with timeout 15 seconds
+# then restart
+# if 3 restarts within 5 cycles then timeout
+# depends on apache_bin
+# group server
+#
+#
+## Check filesystem permissions, uid, gid, space and inode usage. Other services,
+## such as databases, may depend on this resource and an automatically graceful
+## stop may be cascaded to them before the filesystem will become full and data
+## lost.
+#
+# check filesystem datafs with path /dev/sdb1
+# start program = "/bin/mount /data"
+# stop program = "/bin/umount /data"
+# if failed permission 660 then unmonitor
+# if failed uid root then unmonitor
+# if failed gid disk then unmonitor
+# if space usage > 80% for 5 times within 15 cycles then alert
+# if space usage > 99% then stop
+# if inode usage > 30000 then alert
+# if inode usage > 99% then stop
+# group server
+#
+#
+## Check a file's timestamp. In this example, we test if a file is older
+## than 15 minutes and assume something is wrong if its not updated. Also,
+## if the file size exceed a given limit, execute a script
+#
+# check file database with path /data/mydatabase.db
+# if failed permission 700 then alert
+# if failed uid data then alert
+# if failed gid data then alert
+# if timestamp > 15 minutes then alert
+# if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba
+#
+#
+## Check directory permission, uid and gid. An event is triggered if the
+## directory does not belong to the user with uid 0 and gid 0. In addition,
+## the permissions have to match the octal description of 755 (see chmod(1)).
+#
+# check directory bin with path /bin
+# if failed permission 755 then unmonitor
+# if failed uid 0 then unmonitor
+# if failed gid 0 then unmonitor
+#
+#
+## Check a remote host availability by issuing a ping test and check the
+## content of a response from a web server. Up to three pings are sent and
+## connection to a port and an application level network check is performed.
+#
+# check host myserver with address 192.168.1.1
+# if failed icmp type echo count 3 with timeout 3 seconds then alert
+# if failed port 3306 protocol mysql with timeout 15 seconds then alert
+# if failed port 80 protocol http
+# and request /monit/ with content = "Monit [0-9.]+ Download"
+# then alert
+#
+#
+###############################################################################
+## Includes
+###############################################################################
+##
+## It is possible to include additional configuration parts from other files or
+## directories.
+#
+include /etc/monit.d/*
+#
--- /dev/null
+###############################################################################
+# #
+# IPFire.org - A linux based firewall #
+# Copyright (C) 2009 Michael Tremer & Christian Schmidt #
+# #
+# This program is free software: you can redistribute it and/or modify #
+# it under the terms of the GNU General Public License as published by #
+# the Free Software Foundation, either version 3 of the License, or #
+# (at your option) any later version. #
+# #
+# This program is distributed in the hope that it will be useful, #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
+# GNU General Public License for more details. #
+# #
+# You should have received a copy of the GNU General Public License #
+# along with this program. If not, see <http://www.gnu.org/licenses/>. #
+# #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VER = 5.8.1
+
+THISAPP = monit-$(VER)
+DL_FILE = $(THISAPP).tar.gz
+DL_FROM = $(URL_IPFIRE)
+DIR_APP = $(DIR_SRC)/$(THISAPP)
+TARGET = $(DIR_INFO)/$(THISAPP)
+PROG = monit
+PAK_VER = 2
+
+DEPS = ""
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+
+objects = $(DL_FILE)
+
+$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+
+$(DL_FILE)_MD5 = 9467328f1da0b644a766a387443db2ea
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+dist:
+ @$(PAK)
+
+###############################################################################
+# Downloading, checking, md5sum
+###############################################################################
+
+$(patsubst %,$(DIR_CHK)/%,$(objects)) :
+ @$(CHECK)
+
+$(patsubst %,$(DIR_DL)/%,$(objects)) :
+ @$(LOAD)
+
+$(subst %,%_MD5,$(objects)) :
+ @$(MD5)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+ @$(PREBUILD)
+ @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
+ cd $(DIR_APP) && ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+ cd $(DIR_APP) && make $(MAKETUNING)
+ cd $(DIR_APP) && make install
+
+ install -v -m 644 $(DIR_SRC)/config/backup/includes/monit \
+ /var/ipfire/backup/addons/includes/monit
+
+ # Install default configuration
+ install -v -m 600 $(DIR_SRC)/config/monit/monitrc /etc
+
+ # Install start links and backup include file.
+ ln -sf ../init.d/monit /etc/rc.d/rc3.d/S60monit
+ ln -sf ../init.d/monit /etc/rc.d/rc0.d/K40monit
+ ln -sf ../init.d/monit /etc/rc.d/rc6.d/K40monit
+
+ @rm -rf $(DIR_APP)
+ @$(POSTBUILD)
projects / ipfire-2.x.git / commitdiff
