From 6ca65b88c31df11a9b1e20aaaf0a6c23fc9b5054 Mon Sep 17 00:00:00 2001 From: ms Date: Thu, 18 May 2006 17:33:39 +0000 Subject: [PATCH] =?utf8?q?Hinzugef=C3=BCgt:=20=20=20*=20Fritz!PCI=20Treibe?= =?utf8?q?r=20(auch=20SMP)=20Ge=C3=A4ndert:=20=20=20*=20Postfix=20Konfigur?= =?utf8?q?ation=20gek=C3=BCrzt?= MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit git-svn-id: http://svn.ipfire.org/svn/ipfire/trunk@125 ea5c0bd1-69bd-2848-81d8-4f18e57aeed8 --- config/postfix/main.cf | 605 +----------------- config/postfix/master.cf | 4 +- doc/ChangeLog | 16 + doc/packages-list.txt | 1 + lfs/fcpci | 112 ++++ make.sh | 4 +- .../fcpci-suse8.2-03.11.02-compiler.patch | 11 + 7 files changed, 157 insertions(+), 596 deletions(-) create mode 100644 lfs/fcpci create mode 100644 src/patches/fcpci-suse8.2-03.11.02-compiler.patch diff --git a/config/postfix/main.cf b/config/postfix/main.cf index ecd0f2c280..10d3727aad 100644 --- a/config/postfix/main.cf +++ b/config/postfix/main.cf @@ -1,644 +1,63 @@ -# Global Postfix configuration file. This file lists only a subset -# of all 300+ parameters. See the postconf(5) manual page for a -# complete list. -# -# The general format of each line is: parameter = value. Lines -# that begin with whitespace continue the previous line. A value can -# contain references to other $names or ${name}s. -# -# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF -# POSTFIX STILL WORKS AFTER EVERY CHANGE. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# +### +### main.cf for IPFire +### queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# daemon_directory = /usr/lib/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# #myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# #mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user@that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# #myorigin = $myhostname #myorigin = $mydomain - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user@[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# +inet_interfaces = all #proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user@[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -#mydestination = $myhostname, localhost.$mydomain, localhost -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user@domain.tld address. -# +mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, mysql:/etc/postfix/mysql-mydestination.cf #local_recipient_maps = unix:passwd.byname $alias_maps #local_recipient_maps = proxy:unix:passwd.byname $alias_maps #local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class +#ynetworks_style = class #mynetworks_style = subnet #mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# #mynetworks = 168.100.189.0/28, 127.0.0.0/8 #mynetworks = $config_directory/mynetworks #mynetworks = hash:/etc/postfix/network_table - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# #relay_domains = $mydestination - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# #relayhost = $mydomain #relayhost = [gateway.my.domain] #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user@domain.tld address. -# #relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# #in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -#alias_maps = hash:/etc/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -#alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# +alias_maps = hash:/etc/aliases +alias_database = hash:/etc/aliases #recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# #home_mailbox = Mailbox #home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# #mail_spool_directory = /var/mail #mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# #mailbox_command = /some/where/procmail #mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/file/name -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# +mailbox_transport = procmail #fallback_transport = lmtp:unix:/file/name #fallback_transport = cyrus #fallback_transport = - -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# #luser_relay = $user@other.host #luser_relay = $local@other.host #luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# #header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# #fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - +smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) #local_destination_concurrency_limit = 2 #default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - xxgdb $daemon_directory/$process_name $process_id & sleep 5 - -# If you can't use X, use this to capture the call stack when a -# daemon crashes. The result is in a file in the configuration -# directory, and is named after the process name and the process ID. -# -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 -# -# Another possibility is to run gdb under a detached screen session. -# To attach to the screen sesssion, su root and run "screen -r -# " where uniquely matches one of the detached -# sessions (from "screen -list"). -# -# debugger_command = -# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen -# -dmS $process_name gdb $daemon_directory/$process_name -# $process_id & sleep 1 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# sendmail_path = /usr/sbin/sendmail - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# newaliases_path = /usr/bin/newaliases - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# mailq_path = /usr/bin/mailq - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# html_directory = no - -# manpage_directory: The location of the Postfix on-line manual pages. -# manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# sample_directory = /etc/postfix - -# readme_directory: The location of the Postfix README files. -# readme_directory = no +virtual_alias_maps = hash:/etc/postfix/virtual, mysql:/etc/postfix/mysql-virtual.cf +sender_canonical_maps = hash:/etc/postfix/canonical, mysql:/etc/postfix/mysql-canonical.cf \ No newline at end of file diff --git a/config/postfix/master.cf b/config/postfix/master.cf index 3833ad6b4b..38298e9444 100644 --- a/config/postfix/master.cf +++ b/config/postfix/master.cf @@ -60,11 +60,11 @@ maildrop unix - n n - - pipe # The Cyrus deliver program has changed incompatibly, multiple times. # old-cyrus unix - n n - - pipe - flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} + flags= user=cyrus argv=/usr/cyrus/bin/deliver -r ${sender} -m ${extension} ${user} # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 cyrus unix - n n - - pipe - user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} + user=cyrus argv=/usr/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # See the Postfix UUCP_README file for configuration details. # diff --git a/doc/ChangeLog b/doc/ChangeLog index 063a7ae788..a4c6a6940c 100644 --- a/doc/ChangeLog +++ b/doc/ChangeLog @@ -1,3 +1,19 @@ +------------------------------------------------------------------------ +r124 | ms | 2006-05-18 13:39:26 +0200 (Do, 18 Mai 2006) | 3 lines + +Geändert: + * Erste Postfix-Standard-Konfiguration + +------------------------------------------------------------------------ +r123 | ms | 2006-05-18 13:14:03 +0200 (Do, 18 Mai 2006) | 7 lines + +Hinzugefügt: + * Amavisd-new + * Spamassassin (geht nun) + * Sämtlich Perlmodule für Amavis +Geändert: + * ./make.sh make bearbeitet + ------------------------------------------------------------------------ r122 | ms | 2006-05-18 11:14:22 +0200 (Do, 18 Mai 2006) | 10 lines diff --git a/doc/packages-list.txt b/doc/packages-list.txt index a0b9312372..3b22776be6 100644 --- a/doc/packages-list.txt +++ b/doc/packages-list.txt @@ -73,6 +73,7 @@ * fcdslsl-suse8.2-03.11.02 * fcdslslusb-suse8.2-03.11.04 * fcdslusb-suse8.2-03.11.02 + * fcpci-suse8.2-03.11.02 * fcron-2.0.2 * fetchmail-6.3.4 * file-4.16 diff --git a/lfs/fcpci b/lfs/fcpci new file mode 100644 index 0000000000..a58a2a0319 --- /dev/null +++ b/lfs/fcpci @@ -0,0 +1,112 @@ +############################################################################### +# This file is part of the IPCop Firewall. # +# # +# IPCop is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPCop is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPCop; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Makefiles are based on LFSMake, which is # +# Copyright (C) 2002 Rod Roard # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = suse8.2-03.11.02 + +THISAPP = fcpci-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = ftp://ftp.avm.de/cardware/fritzcrd.pci/linux/suse.82 +DIR_APP = $(DIR_SRC)/fritz +ifeq "$(SMP)" "" + TARGET = $(DIR_INFO)/$(THISAPP) +else + TARGET = $(DIR_INFO)/$(THISAPP)-smp +endif + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = 70821234398c08b1ec09fce16e2bac40 + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +#dist: +# make-packages.sh fcpci $(THISAPP)-ipfire-beta-1 + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP)/src.drv && patch -Np1 < $(DIR_SRC)/src/patches/fcpci-suse8.2-03.11.02-compiler.patch +ifeq "$(SMP)" "" + cd $(DIR_APP) && sed -i \ + -e 's/$$(shell uname -m)/$(MACHINE)/' \ + -e 's/$$(shell uname -r)/$(KVER)/' \ + -e 's/`uname -r`/$(KVER)/' \ + -e 's/^\(CCFLAGS.*\)$$/\1 \\/' \ + -e '\+^CCFLAGS+a\ \ + -include \$$(KRNLINCL)/linux/modversions.h' \ + -e '/^DEFINES/a\ \ + -DMODVERSIONS \\' src.drv/makefile +else + cd $(DIR_APP) && sed -i \ + -e 's/$$(shell uname -m)/$(MACHINE)/' \ + -e 's/$$(shell uname -r)/$(KVER)-smp/' \ + -e 's/`uname -r`/$(KVER)-smp/' \ + -e 's/^\(CCFLAGS.*\)$$/\1 \\/' \ + -e '\+^CCFLAGS+a\ \ + -include \$$(KRNLINCL)/linux/modversions.h' \ + -e '/^DEFINES/a\ \ + -DMODVERSIONS \\' src.drv/makefile +endif + cd $(DIR_APP) && CC="$(KGCC)" make + cd $(DIR_APP) && CC="$(KGCC)" make install +ifeq "$(SMP)" "" + find /lib/modules/$(KVER)/misc/ -name '*.o' -a -type f | xargs gzip -f9 +else + find /lib/modules/$(KVER)-smp/misc/ -name '*.o' -a -type f | xargs gzip -f9 +endif +# @rm -rf $(DIR_APP) + @$(POSTBUILD) \ No newline at end of file diff --git a/make.sh b/make.sh index 6908a2175f..944b70392e 100644 --- a/make.sh +++ b/make.sh @@ -540,6 +540,7 @@ buildipcop() { ipcopmake fcdslsl SMP=1 ipcopmake fcdslusb SMP=1 ipcopmake fcdslslusb SMP=1 + ipcopmake fcpci SMP=1 ipcopmake pulsar SMP=1 ipcopmake unicorn SMP=1 fi @@ -559,7 +560,8 @@ buildipcop() { ipcopmake fcdsl2 ipcopmake fcdslsl ipcopmake fcdslusb - ipcopmake fcdslslusb + ipcopmake fcdslslusb + ipcopmake fcpci ipcopmake pulsar ipcopmake unicorn fi diff --git a/src/patches/fcpci-suse8.2-03.11.02-compiler.patch b/src/patches/fcpci-suse8.2-03.11.02-compiler.patch new file mode 100644 index 0000000000..b2f98d123c --- /dev/null +++ b/src/patches/fcpci-suse8.2-03.11.02-compiler.patch @@ -0,0 +1,11 @@ +--- src.drv/defs.h~ 2006-05-18 16:18:08.525808536 +0200 ++++ src.drv/defs.h 2006-05-18 18:57:07.000000000 +0200 +@@ -85,7 +85,7 @@ + #define CONFIG_ISAPNP + #endif + +-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 23) + typedef void irqreturn_t; + + #define IRQ_NONE -- 2.39.2