hostapd: Apply channel bandwidth to configuration

[network.git] / src / functions / functions.hostapd

diff --git a/src/functions/functions.hostapd b/src/functions/functions.hostapd
index 433d172272d0799bfc7641283d9e23072b29f78c..57f8c1e4fc470803555f98f3f2a5f543904ac0cf 100644 (file)
--- a/src/functions/functions.hostapd
+++ b/src/functions/functions.hostapd
@@ -21,6 +21,8 @@
 
 HOSTAPD_CONTROL_INTERFACE_DIR="/run/hostapd/ctrl"
 
+HOSTAPD_SUPPORTED_MODES="802.11a 802.11a/n 802.11ac 802.11g 802.11g/n"
+
 hostapd_config_write() {
        local device=${1}
        assert isset device
@@ -33,9 +35,10 @@ hostapd_config_write() {
 
        local broadcast_ssid
        local channel
+       local channel_bandwidth
        local country_code="$(wireless_get_reg_domain)"
+       local dfs="on"
        local encryption
-       local ieee80211d="1"
        local key
        local mode
        local ssid
@@ -49,22 +52,25 @@ hostapd_config_write() {
                        --channel=*)
                                channel=$(cli_get_val "${1}")
                                ;;
+                       --channel-bandwidth=*)
+                               channel_bandwidth="$(cli_get_val "${1}")"
+                               ;;
+                       --dfs=*)
+                               dfs="$(cli_get_val "${1}")"
+                               ;;
                        --encryption=*)
                                encryption=$(cli_get_val "${1}")
                                ;;
-                       --ieee80211d=*)
-                               local val="$(cli_get_val "${1}")"
-                               if enabled val; then
-                                       ieee80211d="1"
-                               else
-                                       ieee80211d="0"
-                               fi
-                               ;;
                        --key=*)
                                key=$(cli_get_val "${1}")
                                ;;
                        --mode=*)
                                mode=$(cli_get_val "${1}")
+
+                               if ! isoneof mode ${HOSTAPD_SUPPORTED_MODES}; then
+                                       error "Unsupported mode: ${mode}"
+                                       return ${EXIT_ERROR}
+                               fi
                                ;;
                        --ssid=*)
                                ssid=$(cli_get_val "${1}")
@@ -84,6 +90,12 @@ hostapd_config_write() {
                shift
        done
 
+       # Check if mode is set
+       if ! isset mode; then
+               error "Mode is not set"
+               return ${EXIT_ERROR}
+       fi
+
        assert isset broadcast_ssid
        assert isbool broadcast_ssid
 
@@ -99,8 +111,69 @@ hostapd_config_write() {
                assert isset key
        fi
 
-       # Get HT caps
-       local ht_caps="$(wireless_get_ht_caps "${device}")"
+       # Check channel bandwidth for validity
+       if isset channel_bandwidth && ! wireless_channel_bandwidth_is_valid "${mode}" "${channel_bandwidth}"; then
+               error "Invalid channel bandwidth for ${mode}: ${channel_bandwidth}"
+               return ${EXIT_ERROR}
+       fi
+
+       # 802.11ac/n flags
+       local ieee80211ac
+       local ieee80211n
+       local vht_caps
+       local vht_oper_chwidth="0"
+       local ht_caps
+
+       local hw_mode
+       case "${mode}" in
+               802.11a)
+                       hw_mode="a"
+                       ;;
+
+               802.11a/n)
+                       hw_mode="a"
+                       ieee80211n="1"
+
+                       # Fetch HT caps
+                       ht_caps="$(wireless_get_ht_caps "${device}")"
+                       ;;
+
+               802.11g)
+                       hw_mode="g"
+                       ;;
+
+               802.11g/n)
+                       hw_mode="g"
+                       ieee80211n="1"
+
+                       # Fetch HT caps
+                       ht_caps="$(wireless_get_ht_caps "${device}")"
+                       ;;
+
+               802.11ac)
+                       hw_mode="a"
+                       ieee80211ac="1"
+                       ieee80211n="1"
+
+                       # Fetch VHT caps
+                       vht_caps="$(wireless_get_vht_caps "${device}")"
+
+                       # Fetch HT caps
+                       ht_caps="$(wireless_get_ht_caps "${device}")"
+
+                       case "${channel_bandwidth}" in
+                               80)
+                                       vht_oper_chwidth="1"
+                                       ;;
+                               160)
+                                       vht_oper_chwidth="2"
+                                       ;;
+                               80+80)
+                                       vht_oper_chwidth="3"
+                                       ;;
+                       esac
+                       ;;
+       esac
 
        # Create configuration directory.
        local config_dir=$(dirname ${file})
@@ -124,25 +197,34 @@ hostapd_config_write() {
                ignore_broadcast_ssid="1"
        fi
 
-       local hw_mode ieee80211n="0"
-       if [ "${mode}" = "n" ]; then
-               if [ ${channel} -le 15 ]; then
-                       hw_mode="g"
+       (
+               print "# Default settings"
+
+               # Advertise country code and maximum transmission power
+               print "ieee80211d=1"
+
+               # Enable Radar Detection
+               if enabled dfs && wireless_supports_dfs "${device}"; then
+                       print "ieee80211h=1"
                else
-                       hw_mode="a"
+                       print "ieee80211h=0"
                fi
-               ieee80211n="1"
-       else
-               hw_mode="${mode}"
-       fi
 
-       (
+               print # empty line
+
                print "# Wireless configuration"
+               print "hw_mode=${hw_mode}"
+
+               if isset ieee80211ac; then
+                       print "ieee80211ac=${ieee80211ac}"
+               fi
+
+               if isset ieee80211n; then
+                       print "ieee80211n=${ieee80211n}"
+               fi
+
                print "channel=${channel}"
                print "country_code=${country_code}"
-               print "hw_mode=${hw_mode}"
-               print "ieee80211d=${ieee80211d}"
-               print "ieee80211n=${ieee80211n}"
                print "ignore_broadcast_ssid=${ignore_broadcast_ssid}"
 
                if contains_spaces "${ssid}"; then
@@ -154,9 +236,17 @@ hostapd_config_write() {
                # WMM
                print "wmm_enabled=${wmm}"
 
+               # Enable VHT caps
+               if isset vht_caps; then
+                       print "vht_capab=${vht_caps}"
+               fi
+
                # Enable HT caps
                print "ht_capab=${ht_caps}"
 
+               # Wider Channels
+               print "vht_oper_chwidth=${vht_oper_chwidth}"
+
                print
        ) >> ${file}