[people/arne_f/kernel.git] / arch / arm / boot / dts / at91sam9x5ek.dtsi

/*
 * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
 *
 *  Copyright (C) 2012 Atmel,
 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */
#include "at91sam9x5cm.dtsi"

/ {
	model = "Atmel AT91SAM9X5-EK";
	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";

	chosen {
		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
	};

	ahb {
		apb {
			mmc0: mmc@f0008000 {
				pinctrl-0 = <
					&pinctrl_board_mmc0
					&pinctrl_mmc0_slot0_clk_cmd_dat0
					&pinctrl_mmc0_slot0_dat1_3>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
				};
			};

			mmc1: mmc@f000c000 {
				pinctrl-0 = <
					&pinctrl_board_mmc1
					&pinctrl_mmc1_slot0_clk_cmd_dat0
					&pinctrl_mmc1_slot0_dat1_3>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
				};
			};

			dbgu: serial@fffff200 {
				status = "okay";
			};

			usart0: serial@f801c000 {
				status = "okay";
			};

			usb2: gadget@f803c000 {
				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
				status = "okay";
			};

			i2c0: i2c@f8010000 {
				status = "okay";

				wm8731: wm8731@1a {
					compatible = "wm8731";
					reg = <0x1a>;
				};
			};

			pinctrl@fffff400 {
				mmc0 {
					pinctrl_board_mmc0: mmc0-board {
						atmel,pins =
							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
					};
				};

				mmc1 {
					pinctrl_board_mmc1: mmc1-board {
						atmel,pins =
							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
					};
				};
			};

			spi0: spi@f0000000 {
				status = "okay";
				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
				m25p80@0 {
					compatible = "atmel,at25df321a";
					spi-max-frequency = <50000000>;
					reg = <0>;
				};
			};

			watchdog@fffffe40 {
				status = "okay";
			};

			ssc0: ssc@f0010000 {
				status = "okay";
			};
		};

		usb0: ohci@00600000 {
			status = "okay";
			num-ports = <3>;
			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
					   &pioD 19 GPIO_ACTIVE_LOW
					   &pioD 20 GPIO_ACTIVE_LOW
					  >;
		};

		usb1: ehci@00700000 {
			status = "okay";
		};
	};

	sound {
		compatible = "atmel,sam9x5-wm8731-audio";

		atmel,model = "wm8731 @ AT91SAM9X5EK";

		atmel,audio-routing =
			"Headphone Jack", "RHPOUT",
			"Headphone Jack", "LHPOUT",
			"LLINEIN", "Line In Jack",
			"RLINEIN", "Line In Jack";

		atmel,ssc-controller = <&ssc0>;
		atmel,audio-codec = <&wm8731>;
	};
};
Commit	Line	Data
ec6754a7 JCPV	1	/*
	2	* at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
	3	*
	4	* Copyright (C) 2012 Atmel,
	5	* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
	6	*
	7	* Licensed under GPLv2 or later.
	8	*/
6db64d29	9	#include "at91sam9x5cm.dtsi"
ec6754a7 JCPV	10
	11	/ {
	12	model = "Atmel AT91SAM9X5-EK";
	13	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
	14
	15	chosen {
b090e5f6	16	bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
ec6754a7 JCPV	17	};
	18
	19	ahb {
	20	apb {
4134a455	21	mmc0: mmc@f0008000 {
199e2ede JCPV	22	pinctrl-0 = <
	23	&pinctrl_board_mmc0
	24	&pinctrl_mmc0_slot0_clk_cmd_dat0
	25	&pinctrl_mmc0_slot0_dat1_3>;
4134a455 LD	26	status = "okay";
	27	slot@0 {
	28	reg = <0>;
	29	bus-width = <4>;
92f8629b	30	cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
4134a455 LD	31	};
	32	};
	33
	34	mmc1: mmc@f000c000 {
199e2ede JCPV	35	pinctrl-0 = <
	36	&pinctrl_board_mmc1
	37	&pinctrl_mmc1_slot0_clk_cmd_dat0
	38	&pinctrl_mmc1_slot0_dat1_3>;
4134a455 LD	39	status = "okay";
	40	slot@0 {
	41	reg = <0>;
	42	bus-width = <4>;
92f8629b	43	cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
4134a455 LD	44	};
	45	};
	46
ec6754a7 JCPV	47	dbgu: serial@fffff200 {
	48	status = "okay";
	49	};
	50
	51	usart0: serial@f801c000 {
	52	status = "okay";
	53	};
	54
17bcaaa3 JCPV	55	usb2: gadget@f803c000 {
	56	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
	57	status = "okay";
	58	};
	59
ec6754a7 JCPV	60	i2c0: i2c@f8010000 {
ec6754a7 JCPV	61	status = "okay";
4dc6e27c RG	62
	63	wm8731: wm8731@1a {
	64	compatible = "wm8731";
	65	reg = <0x1a>;
	66	};
ec6754a7 JCPV	67	};
ec6754a7 JCPV	68
199e2ede JCPV	69	pinctrl@fffff400 {
	70	mmc0 {
	71	pinctrl_board_mmc0: mmc0-board {
	72	atmel,pins =
c9d0f317	73	<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
199e2ede JCPV	74	};
	75	};
	76
	77	mmc1 {
	78	pinctrl_board_mmc1: mmc1-board {
	79	atmel,pins =
c9d0f317	80	<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
199e2ede JCPV	81	};
	82	};
	83	};
b6811e9a RG	84
	85	spi0: spi@f0000000 {
	86	status = "okay";
	87	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
	88	m25p80@0 {
	89	compatible = "atmel,at25df321a";
	90	spi-max-frequency = <50000000>;
	91	reg = <0>;
	92	};
	93	};
c77bcef4 WY	94
	95	watchdog@fffffe40 {
	96	status = "okay";
	97	};
45b76352 RG	98
	99	ssc0: ssc@f0010000 {
	100	status = "okay";
	101	};
ec6754a7 JCPV	102	};
	103
	104	usb0: ohci@00600000 {
	105	status = "okay";
69b90f1a NF	106	num-ports = <3>;
	107	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW // Activate to have access to port A */
	108	&pioD 19 GPIO_ACTIVE_LOW
92f8629b	109	&pioD 20 GPIO_ACTIVE_LOW
ec6754a7 JCPV	110	>;
	111	};
	112
	113	usb1: ehci@00700000 {
	114	status = "okay";
	115	};
	116	};
90d01929 RG	117
	118	sound {
	119	compatible = "atmel,sam9x5-wm8731-audio";
	120
	121	atmel,model = "wm8731 @ AT91SAM9X5EK";
	122
	123	atmel,audio-routing =
	124	"Headphone Jack", "RHPOUT",
	125	"Headphone Jack", "LHPOUT",
	126	"LLINEIN", "Line In Jack",
	127	"RLINEIN", "Line In Jack";
	128
	129	atmel,ssc-controller = <&ssc0>;
	130	atmel,audio-codec = <&wm8731>;
	131	};
ec6754a7	132	};