]> git.ipfire.org Git - people/arne_f/kernel.git/blame - arch/arm/boot/dts/imx28-m28evk.dts
projects / people / arne_f / kernel.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
sun7i: dts: add bananapro.
[people/arne_f/kernel.git] / arch / arm / boot / dts / imx28-m28evk.dts
CommitLineData
8fa62e11
MV		 1/*
2 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
bc3875f1 13#include "imx28.dtsi"
8fa62e11
MV		 14
15/ {
16 model = "DENX M28EVK";
17 compatible = "denx,m28evk", "fsl,imx28";
18
19 memory {
20 reg = <0x40000000 0x08000000>;
21 };
22
23 apb@80000000 {
24 apbh@80000000 {
25 gpmi-nand@8000c000 {
91ed4938
MV		 26 #address-cells = <1>;
27 #size-cells = <1>;
8fa62e11
MV		 28 pinctrl-names = "default";
29 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
30 status = "okay";
31
32 partition@0 {
33 label = "bootloader";
34 reg = <0x00000000 0x00300000>;
35 read-only;
36 };
37
38 partition@1 {
39 label = "environment";
40 reg = <0x00300000 0x00080000>;
41 };
42
43 partition@2 {
44 label = "redundant-environment";
45 reg = <0x00380000 0x00080000>;
46 };
47
48 partition@3 {
49 label = "kernel";
50 reg = <0x00400000 0x00400000>;
51 };
52
53 partition@4 {
54 label = "filesystem";
55 reg = <0x00800000 0x0f800000>;
56 };
57 };
58
59 ssp0: ssp@80010000 {
60 compatible = "fsl,imx28-mmc";
61 pinctrl-names = "default";
62 pinctrl-0 = <&mmc0_8bit_pins_a
63 &mmc0_cd_cfg
64 &mmc0_sck_cfg>;
65 bus-width = <8>;
acd3b69f 66 wp-gpios = <&gpio3 10 0>;
91ed4938 67 vmmc-supply = <&reg_vddio_sd0>;
8fa62e11
MV		 68 status = "okay";
69 };
70
91ed4938
MV		 71 ssp2: ssp@80014000 {
72 #address-cells = <1>;
73 #size-cells = <0>;
74 compatible = "fsl,imx28-spi";
75 pinctrl-names = "default";
76 pinctrl-0 = <&spi2_pins_a>;
77 status = "okay";
78
79 flash: m25p80@0 {
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "m25p80";
83 spi-max-frequency = <40000000>;
84 reg = <0>;
85 };
86 };
87
8fa62e11
MV		 88 pinctrl@80018000 {
89 pinctrl-names = "default";
90 pinctrl-0 = <&hog_pins_a>;
91
e0e35b48 92 hog_pins_a: hog@0 {
8fa62e11
MV		 93 reg = <0>;
94 fsl,pinmux-ids = <
bc3875f1
LW		 95 MX28_PAD_PWM3__GPIO_3_28
96 MX28_PAD_AUART2_CTS__GPIO_3_10
97 MX28_PAD_AUART2_RTS__GPIO_3_11
98 MX28_PAD_AUART3_RX__GPIO_3_12
99 MX28_PAD_AUART3_TX__GPIO_3_13
8fa62e11 100 >;
4191c340
LW		 101 fsl,drive-strength = <MXS_DRIVE_4mA>;
102 fsl,voltage = <MXS_VOLTAGE_HIGH>;
103 fsl,pull-up = <MXS_PULL_DISABLE>;
8fa62e11
MV		 104 };
105
106 lcdif_pins_m28: lcdif-m28@0 {
107 reg = <0>;
108 fsl,pinmux-ids = <
bc3875f1
LW		 109 MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
110 MX28_PAD_LCD_ENABLE__LCD_ENABLE
8fa62e11 111 >;
4191c340
LW		 112 fsl,drive-strength = <MXS_DRIVE_4mA>;
113 fsl,voltage = <MXS_VOLTAGE_HIGH>;
114 fsl,pull-up = <MXS_PULL_DISABLE>;
8fa62e11
MV		 115 };
116 };
117
118 lcdif@80030000 {
119 pinctrl-names = "default";
120 pinctrl-0 = <&lcdif_24bit_pins_a
121 &lcdif_pins_m28>;
0d9f8217 122 display = <&display>;
8fa62e11 123 status = "okay";
0d9f8217
SG		 124
125 display: display {
126 bits-per-pixel = <16>;
127 bus-width = <18>;
128
129 display-timings {
130 native-mode = <&timing0>;
131 timing0: timing0 {
132 clock-frequency = <33260000>;
133 hactive = <800>;
134 vactive = <480>;
135 hback-porch = <0>;
136 hfront-porch = <256>;
137 vback-porch = <0>;
138 vfront-porch = <45>;
139 hsync-len = <1>;
140 vsync-len = <1>;
141 hsync-active = <0>;
142 vsync-active = <0>;
143 de-active = <1>;
144 pixelclk-active = <1>;
145 };
146 };
147 };
8fa62e11
MV		 148 };
149
150 can0: can@80032000 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&can0_pins_a>;
153 status = "okay";
154 };
155
156 can1: can@80034000 {
157 pinctrl-names = "default";
158 pinctrl-0 = <&can1_pins_a>;
159 status = "okay";
160 };
161 };
162
163 apbx@80040000 {
164 saif0: saif@80042000 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&saif0_pins_a>;
167 status = "okay";
168 };
169
170 saif1: saif@80046000 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&saif1_pins_a>;
173 fsl,saif-master = <&saif0>;
174 status = "okay";
175 };
176
177 i2c0: i2c@80058000 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&i2c0_pins_a>;
180 status = "okay";
181
182 sgtl5000: codec@0a {
183 compatible = "fsl,sgtl5000";
184 reg = <0x0a>;
185 VDDA-supply = <&reg_3p3v>;
186 VDDIO-supply = <&reg_3p3v>;
66acaf3f 187 clocks = <&saif0>;
8fa62e11
MV		 188 };
189
190 eeprom: eeprom@51 {
191 compatible = "atmel,24c128";
192 reg = <0x51>;
193 pagesize = <32>;
194 };
195
196 rtc: rtc@68 {
197 compatible = "stm,mt41t62";
198 reg = <0x68>;
199 };
200 };
201
91ed4938
MV		 202 lradc@80050000 {
203 status = "okay";
da021ee3 204 fsl,lradc-touchscreen-wires = <4>;
91ed4938
MV		 205 };
206
8fa62e11
MV		 207 duart: serial@80074000 {
208 pinctrl-names = "default";
209 pinctrl-0 = <&duart_pins_a>;
210 status = "okay";
211 };
212
91ed4938 213 usbphy0: usbphy@8007c000 {
8fa62e11
MV		 214 status = "okay";
215 };
216
91ed4938
MV		 217 usbphy1: usbphy@8007e000 {
218 status = "okay";
219 };
220
221 auart0: serial@8006a000 {
8fa62e11 222 pinctrl-names = "default";
56924ad2
MV		 223 pinctrl-0 = <&auart0_pins_a>;
224 status = "okay";
225 };
226
227 auart1: serial@8006c000 {
228 pinctrl-names = "default";
229 pinctrl-0 = <&auart1_pins_a>;
230 status = "okay";
231 };
232
233 auart2: serial@8006e000 {
234 pinctrl-names = "default";
235 pinctrl-0 = <&auart2_2pins_b>;
8fa62e11
MV		 236 status = "okay";
237 };
db3b9baa
MV		 238
239 pwm: pwm@80064000 {
240 pinctrl-names = "default";
241 pinctrl-0 = <&pwm4_pins_a>;
242 status = "okay";
243 };
8fa62e11
MV		 244 };
245 };
246
247 ahb@80080000 {
91ed4938
MV		 248 usb0: usb@80080000 {
249 vbus-supply = <&reg_usb0_vbus>;
250 pinctrl-names = "default";
251 pinctrl-0 = <&usbphy0_pins_a>;
252 status = "okay";
253 };
254
255 usb1: usb@80090000 {
256 vbus-supply = <&reg_usb1_vbus>;
257 pinctrl-names = "default";
258 pinctrl-0 = <&usbphy1_pins_a>;
259 status = "okay";
260 };
261
8fa62e11
MV		 262 mac0: ethernet@800f0000 {
263 phy-mode = "rmii";
264 pinctrl-names = "default";
265 pinctrl-0 = <&mac0_pins_a>;
f231a9fe
WS		 266 clocks = <&clks 57>, <&clks 57>;
267 clock-names = "ipg", "ahb";
8fa62e11
MV		 268 status = "okay";
269 };
270
271 mac1: ethernet@800f4000 {
272 phy-mode = "rmii";
273 pinctrl-names = "default";
274 pinctrl-0 = <&mac1_pins_a>;
275 status = "okay";
276 };
277 };
278
db3b9baa
MV		 279 backlight {
280 compatible = "pwm-backlight";
281 pwms = <&pwm 4 5000000>;
282 brightness-levels = <0 4 8 16 32 64 128 255>;
283 default-brightness-level = <6>;
284 };
285
8fa62e11
MV		 286 regulators {
287 compatible = "simple-bus";
288
289 reg_3p3v: 3p3v {
290 compatible = "regulator-fixed";
291 regulator-name = "3P3V";
292 regulator-min-microvolt = <3300000>;
293 regulator-max-microvolt = <3300000>;
294 regulator-always-on;
295 };
91ed4938
MV		 296
297 reg_vddio_sd0: vddio-sd0 {
298 compatible = "regulator-fixed";
299 regulator-name = "vddio-sd0";
300 regulator-min-microvolt = <3300000>;
301 regulator-max-microvolt = <3300000>;
302 gpio = <&gpio3 28 0>;
303 };
304
305 reg_usb0_vbus: usb0_vbus {
306 compatible = "regulator-fixed";
307 regulator-name = "usb0_vbus";
308 regulator-min-microvolt = <5000000>;
309 regulator-max-microvolt = <5000000>;
310 gpio = <&gpio3 12 0>;
311 };
312
313 reg_usb1_vbus: usb1_vbus {
314 compatible = "regulator-fixed";
315 regulator-name = "usb1_vbus";
316 regulator-min-microvolt = <5000000>;
317 regulator-max-microvolt = <5000000>;
318 gpio = <&gpio3 13 0>;
319 };
8fa62e11
MV		 320 };
321
322 sound {
323 compatible = "denx,m28evk-sgtl5000",
324 "fsl,mxs-audio-sgtl5000";
325 model = "m28evk-sgtl5000";
326 saif-controllers = <&saif0 &saif1>;
327 audio-codec = <&sgtl5000>;
328 };
329};
Arne's tree of linux kernel.