[people/arne_f/kernel.git] / arch / arm / boot / dts / imx53-m53evk.dts

/*
 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "imx53.dtsi"

/ {
	model = "DENX M53EVK";
	compatible = "denx,imx53-m53evk", "fsl,imx53";

	memory {
		reg = <0x70000000 0x20000000>;
	};

	soc {
		display@di1 {
			compatible = "fsl,imx-parallel-display";
			crtcs = <&ipu 1>;
			interface-pix-fmt = "bgr666";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ipu_disp2_1>;

			display-timings {
				800x480p60 {
					native-mode;
					clock-frequency = <31500000>;
					hactive = <800>;
					vactive = <480>;
					hfront-porch = <40>;
					hback-porch = <88>;
					hsync-len = <128>;
					vback-porch = <33>;
					vfront-porch = <9>;
					vsync-len = <3>;
					vsync-active = <1>;
				};
			};
		};
	};

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 3000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&led_pin_gpio>;

		user1 {
			label = "user1";
			gpios = <&gpio2 8 0>;
			linux,default-trigger = "heartbeat";
		};

		user2 {
			label = "user2";
			gpios = <&gpio2 9 0>;
			linux,default-trigger = "heartbeat";
		};
	};

	regulators {
		compatible = "simple-bus";

		reg_3p2v: 3p2v {
			compatible = "regulator-fixed";
			regulator-name = "3P2V";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3200000>;
			regulator-always-on;
		};
	};

	sound {
		compatible = "fsl,imx53-m53evk-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "imx53-m53evk-sgtl5000";
		ssi-controller = <&ssi2>;
		audio-codec = <&sgtl5000>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"LINE_IN", "Line In Jack",
			"Headphone Jack", "HP_OUT",
			"Ext Spk", "LINE_OUT";
		mux-int-port = <2>;
		mux-ext-port = <4>;
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux_2>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1_3>;
	status = "okay";
};

&can2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can2_1>;
	status = "okay";
};

&esdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esdhc1_1>;
	cd-gpios = <&gpio1 1 0>;
	wp-gpios = <&gpio1 9 0>;
	status = "okay";
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec_1>;
	phy-mode = "rmii";
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1_2>;
	status = "okay";

	sgtl5000: codec@0a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		VDDA-supply = <&reg_3p2v>;
		VDDIO-supply = <&reg_3p2v>;
		clocks = <&clks 150>;
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2_2>;
	clock-frequency = <400000>;
	status = "okay";

	stmpe610@41 {
		compatible = "st,stmpe610";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x41>;
		id = <0>;
		blocks = <0x5>;
		interrupts = <6 0x0>;
		interrupt-parent = <&gpio7>;
		irq-trigger = <0x1>;

		stmpe_touchscreen {
			compatible = "stmpe,ts";
			reg = <0>;
			ts,sample-time = <4>;
			ts,mod-12b = <1>;
			ts,ref-sel = <0>;
			ts,adc-freq = <1>;
			ts,ave-ctrl = <3>;
			ts,touch-det-delay = <3>;
			ts,settling = <4>;
			ts,fraction-z = <7>;
			ts,i-drive = <1>;
		};
	};

	eeprom: eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
		pagesize = <32>;
	};

	rtc: rtc@68 {
		compatible = "stm,m41t62";
		reg = <0x68>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3_1>;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	hog {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5

			>;
		};

		led_pin_gpio: led_gpio@0 {
			fsl,pins = <
				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
			>;
		};
	};
};

&nfc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_nand_1>;
	nand-bus-width = <8>;
	nand-ecc-mode = "hw";
	status = "okay";
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1_1>;
	status = "okay";
};

&ssi2 {
	fsl,mode = "i2s-slave";
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1_2>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2_1>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3_1>;
	status = "okay";
};
Commit	Line	Data
051124e5 MV	1	/*
	2	* Copyright (C) 2013 Marek Vasut <marex@denx.de>
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
	12	/dts-v1/;
	13	#include "imx53.dtsi"
	14
	15	/ {
	16	model = "DENX M53EVK";
	17	compatible = "denx,imx53-m53evk", "fsl,imx53";
	18
	19	memory {
	20	reg = <0x70000000 0x20000000>;
	21	};
	22
	23	soc {
	24	display@di1 {
	25	compatible = "fsl,imx-parallel-display";
	26	crtcs = <&ipu 1>;
	27	interface-pix-fmt = "bgr666";
	28	pinctrl-names = "default";
	29	pinctrl-0 = <&pinctrl_ipu_disp2_1>;
	30
	31	display-timings {
	32	800x480p60 {
	33	native-mode;
	34	clock-frequency = <31500000>;
	35	hactive = <800>;
	36	vactive = <480>;
	37	hfront-porch = <40>;
	38	hback-porch = <88>;
	39	hsync-len = <128>;
	40	vback-porch = <33>;
	41	vfront-porch = <9>;
	42	vsync-len = <3>;
	43	vsync-active = <1>;
	44	};
	45	};
	46	};
	47	};
	48
	49	backlight {
	50	compatible = "pwm-backlight";
	51	pwms = <&pwm1 0 3000>;
	52	brightness-levels = <0 4 8 16 32 64 128 255>;
	53	default-brightness-level = <6>;
	54	};
	55
	56	leds {
	57	compatible = "gpio-leds";
	58	pinctrl-names = "default";
	59	pinctrl-0 = <&led_pin_gpio>;
	60
	61	user1 {
	62	label = "user1";
	63	gpios = <&gpio2 8 0>;
	64	linux,default-trigger = "heartbeat";
65	};
66
67	user2 {
68	label = "user2";
69	gpios = <&gpio2 9 0>;
70	linux,default-trigger = "heartbeat";
71	};
72	};
73
74	regulators {
75	compatible = "simple-bus";
76
77	reg_3p2v: 3p2v {
78	compatible = "regulator-fixed";
79	regulator-name = "3P2V";
80	regulator-min-microvolt = <3200000>;
81	regulator-max-microvolt = <3200000>;
82	regulator-always-on;
83	};
84	};
85
86	sound {
87	compatible = "fsl,imx53-m53evk-sgtl5000",
88	"fsl,imx-audio-sgtl5000";
89	model = "imx53-m53evk-sgtl5000";
90	ssi-controller = <&ssi2>;
91	audio-codec = <&sgtl5000>;
92	audio-routing =
93	"MIC_IN", "Mic Jack",
94	"Mic Jack", "Mic Bias",
95	"LINE_IN", "Line In Jack",
96	"Headphone Jack", "HP_OUT",
97	"Ext Spk", "LINE_OUT";
98	mux-int-port = <2>;
99	mux-ext-port = <4>;
100	};
101	};
102
103	&audmux {
104	pinctrl-names = "default";
105	pinctrl-0 = <&pinctrl_audmux_2>;
106	status = "okay";
107	};
108
109	&can1 {
110	pinctrl-names = "default";
111	pinctrl-0 = <&pinctrl_can1_3>;
112	status = "okay";
113	};
114
115	&can2 {
116	pinctrl-names = "default";
117	pinctrl-0 = <&pinctrl_can2_1>;
118	status = "okay";
119	};
120
121	&esdhc1 {
122	pinctrl-names = "default";
123	pinctrl-0 = <&pinctrl_esdhc1_1>;
124	cd-gpios = <&gpio1 1 0>;
125	wp-gpios = <&gpio1 9 0>;
126	status = "okay";
127	};
128
129	&fec {
130	pinctrl-names = "default";
131	pinctrl-0 = <&pinctrl_fec_1>;
132	phy-mode = "rmii";
133	status = "okay";
134	};
135
136	&i2c1 {
137	pinctrl-names = "default";
138	pinctrl-0 = <&pinctrl_i2c1_2>;
139	status = "okay";
140
141	sgtl5000: codec@0a {
142	compatible = "fsl,sgtl5000";
143	reg = <0x0a>;
144	VDDA-supply = <&reg_3p2v>;
145	VDDIO-supply = <&reg_3p2v>;
146	clocks = <&clks 150>;
147	};
148	};
149
150	&i2c2 {
151	pinctrl-names = "default";
152	pinctrl-0 = <&pinctrl_i2c2_2>;
153	clock-frequency = <400000>;
154	status = "okay";
155
156	stmpe610@41 {
157	compatible = "st,stmpe610";
158	#address-cells = <1>;
159	#size-cells = <0>;
160	reg = <0x41>;
161	id = <0>;
162	blocks = <0x5>;
163	interrupts = <6 0x0>;
164	interrupt-parent = <&gpio7>;
165	irq-trigger = <0x1>;
166
167	stmpe_touchscreen {
168	compatible = "stmpe,ts";
169	reg = <0>;
170	ts,sample-time = <4>;
171	ts,mod-12b = <1>;
172	ts,ref-sel = <0>;
173	ts,adc-freq = <1>;
174	ts,ave-ctrl = <3>;
175	ts,touch-det-delay = <3>;
176	ts,settling = <4>;
177	ts,fraction-z = <7>;
178	ts,i-drive = <1>;
179	};
180	};
181
182	eeprom: eeprom@50 {
183	compatible = "atmel,24c128";
184	reg = <0x50>;
185	pagesize = <32>;
186	};
187
188	rtc: rtc@68 {
189	compatible = "stm,m41t62";
190	reg = <0x68>;
191	};
192	};
193
194	&i2c3 {
195	pinctrl-names = "default";
196	pinctrl-0 = <&pinctrl_i2c3_1>;
197	status = "okay";
198	};
199
200	&iomuxc {
201	pinctrl-names = "default";
202	pinctrl-0 = <&pinctrl_hog>;
203
204	hog {
205	pinctrl_hog: hoggrp {
206	fsl,pins = <
207	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
208	MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
209	MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
210	MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
211
212	>;
213	};
214
215	led_pin_gpio: led_gpio@0 {
216	fsl,pins = <
217	MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
218	MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
219	>;
220	};
221	};
222	};
223
224	&nfc {
225	pinctrl-names = "default";
226	pinctrl-0 = <&pinctrl_nand_1>;
227	nand-bus-width = <8>;
228	nand-ecc-mode = "hw";
229	status = "okay";
230	};
231
232	&pwm1 {
233	pinctrl-names = "default";
234	pinctrl-0 = <&pinctrl_pwm1_1>;
235	status = "okay";
236	};
237
238	&ssi2 {
239	fsl,mode = "i2s-slave";
240	status = "okay";
241	};
242
243	&uart1 {
244	pinctrl-names = "default";
245	pinctrl-0 = <&pinctrl_uart1_2>;
246	status = "okay";
247	};
248
249	&uart2 {
250	pinctrl-names = "default";
251	pinctrl-0 = <&pinctrl_uart2_1>;
252	status = "okay";
253	};
254
255	&uart3 {
256	pinctrl-names = "default";
257	pinctrl-0 = <&pinctrl_uart3_1>;
258	status = "okay";
259	};