[people/arne_f/kernel.git] / arch / arm / boot / dts / imx6dl-hummingboard.dts

/*
 * Copyright (C) 2013,2014 Russell King
 */
/dts-v1/;

#include "imx6dl.dtsi"
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"

/ {
	model = "SolidRun HummingBoard DL/Solo";
	compatible = "solidrun,hummingboard", "fsl,imx6dl";

	ir_recv: ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio1 2 1>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>;
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usbh1_vbus: usb-h1-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio1 0 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};

		reg_usbotg_vbus: usb-otg-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio3 22 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};
	};

	sound-spdif {
		compatible = "fsl,imx-audio-spdif";
		model = "imx-spdif";
		/* IMX6 doesn't implement this yet */
		spdif-controller = <&spdif>;
		spdif-out;
	};
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;

	/*
	 * Not fitted on Carrier-1 board... yet
	status = "okay";

	rtc: pcf8523@68 {
		compatible = "nxp,pcf8523";
		reg = <0x68>;
	};
	 */
};

&iomuxc {
	hummingboard {
		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
			fsl,pins = <
				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
			>;
		};

		pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 {
			fsl,pins = <
				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
			>;
		};

		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
			fsl,pins = <
				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
			>;
		};

		pinctrl_hummingboard_spdif: hummingboard-spdif {
			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
		};

		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
		};

		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
		};

		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
			fsl,pins = <
				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
			>;
		};

		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
			>;
		};
	};
};

&spdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usbh1_vbus>;
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usbotg_vbus>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <
		&pinctrl_hummingboard_usdhc2_aux
		&pinctrl_hummingboard_usdhc2
	>;
	vmmc-supply = <&reg_3p3v>;
	cd-gpios = <&gpio1 4 0>;
	status = "okay";
};
Commit	Line	Data
208d7baf RK	1	/*
	2	* Copyright (C) 2013,2014 Russell King
	3	*/
	4	/dts-v1/;
	5
	6	#include "imx6dl.dtsi"
	7	#include "imx6qdl-microsom.dtsi"
	8	#include "imx6qdl-microsom-ar8035.dtsi"
	9
	10	/ {
	11	model = "SolidRun HummingBoard DL/Solo";
	12	compatible = "solidrun,hummingboard", "fsl,imx6dl";
	13
	14	ir_recv: ir-receiver {
	15	compatible = "gpio-ir-receiver";
	16	gpios = <&gpio1 2 1>;
	17	pinctrl-names = "default";
	18	pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>;
	19	};
	20
	21	regulators {
	22	compatible = "simple-bus";
	23
	24	reg_3p3v: 3p3v {
	25	compatible = "regulator-fixed";
	26	regulator-name = "3P3V";
	27	regulator-min-microvolt = <3300000>;
	28	regulator-max-microvolt = <3300000>;
	29	regulator-always-on;
	30	};
	31
	32	reg_usbh1_vbus: usb-h1-vbus {
	33	compatible = "regulator-fixed";
	34	enable-active-high;
	35	gpio = <&gpio1 0 0>;
	36	pinctrl-names = "default";
	37	pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
	38	regulator-name = "usb_h1_vbus";
	39	regulator-min-microvolt = <5000000>;
	40	regulator-max-microvolt = <5000000>;
	41	};
	42
	43	reg_usbotg_vbus: usb-otg-vbus {
	44	compatible = "regulator-fixed";
	45	enable-active-high;
	46	gpio = <&gpio3 22 0>;
	47	pinctrl-names = "default";
	48	pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
	49	regulator-name = "usb_otg_vbus";
	50	regulator-min-microvolt = <5000000>;
	51	regulator-max-microvolt = <5000000>;
	52	};
	53	};
	54
208d7baf RK	55	sound-spdif {
	56	compatible = "fsl,imx-audio-spdif";
	57	model = "imx-spdif";
	58	/* IMX6 doesn't implement this yet */
	59	spdif-controller = <&spdif>;
	60	spdif-out;
	61	};
	62	};
	63
	64	&can1 {
	65	pinctrl-names = "default";
	66	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
	67	status = "okay";
	68	};
	69
	70	&i2c1 {
	71	pinctrl-names = "default";
	72	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
	73
	74	/*
	75	* Not fitted on Carrier-1 board... yet
	76	status = "okay";
	77
	78	rtc: pcf8523@68 {
	79	compatible = "nxp,pcf8523";
	80	reg = <0x68>;
	81	};
	82	*/
	83	};
	84
	85	&iomuxc {
	86	hummingboard {
	87	pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
	88	fsl,pins = <
	89	MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
	90	MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
	91	>;
	92	};
	93
	94	pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 {
	95	fsl,pins = <
	96	MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
	97	>;
	98	};
	99
	100	pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
	101	fsl,pins = <
	102	MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
	103	MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
	104	>;
	105	};
	106
	107	pinctrl_hummingboard_spdif: hummingboard-spdif {
87f9260b	108	fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
208d7baf RK	109	};
	110
	111	pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
	112	fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
	113	};
	114
	115	pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
	116	fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
	117	};
	118
	119	pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
	120	fsl,pins = <
	121	MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
	122	>;
	123	};
	124
	125	pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
	126	fsl,pins = <
	127	MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
	128	MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
	129	MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
	130	MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
	131	MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
	132	MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
	133	>;
	134	};
	135	};
	136	};
	137
	138	&spdif {
87f9260b RK	139	pinctrl-names = "default";
87f9260b RK	140	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
208d7baf RK	141	status = "okay";
	142	};
	143
	144	&usbh1 {
	145	vbus-supply = <&reg_usbh1_vbus>;
	146	status = "okay";
	147	};
	148
	149	&usbotg {
	150	vbus-supply = <&reg_usbotg_vbus>;
	151	status = "okay";
	152	};
	153
	154	&usdhc2 {
	155	pinctrl-names = "default";
	156	pinctrl-0 = <
	157	&pinctrl_hummingboard_usdhc2_aux
	158	&pinctrl_hummingboard_usdhc2
	159	>;
	160	vmmc-supply = <&reg_3p3v>;
	161	cd-gpios = <&gpio1 4 0>;
	162	status = "okay";
	163	};