[people/arne_f/kernel.git] / arch / arm / boot / dts / omap3-n900.dts

/*
 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 (or later) as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "omap34xx-hs.dtsi"

/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
		compatible = "gpio-keys";

		camera_lens_cover {
			label = "Camera Lens Cover";
			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
			gpio-key,wakeup;
		};

		camera_focus {
			label = "Camera Focus";
			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
			gpio-key,wakeup;
		};

		camera_capture {
			label = "Camera Capture";
			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
			linux,code = <0xd4>; /* KEY_CAMERA */
			gpio-key,wakeup;
		};

		lock_button {
			label = "Lock Button";
			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
			linux,code = <0x98>; /* KEY_SCREENLOCK */
			gpio-key,wakeup;
		};

		keypad_slide {
			label = "Keypad Slide";
			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
			gpio-key,wakeup;
		};

		proximity_sensor {
			label = "Proximity Sensor";
			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
		};
	};

};

&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
		>;
	};

	mmc2_pins: pinmux_mmc2_pins {
		pinctrl-single,pins = <
			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
		>;
	};

	display_pins: pinmux_display_pins {
		pinctrl-single,pins = <
			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"

&vaux1 {
	regulator-name = "V28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-always-on; /* due battery cover sensor */
};

&vaux2 {
	regulator-name = "VCSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vaux3 {
	regulator-name = "VMMC2_30";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
};

&vaux4 {
	regulator-name = "VCAM_ANA_28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
};

&vmmc1 {
	regulator-name = "VMMC1";
	regulator-min-microvolt = <1850000>;
	regulator-max-microvolt = <3150000>;
};

&vmmc2 {
	regulator-name = "V28_A";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on; /* due VIO leak to AIC34 VDDs */
};

&vpll1 {
	regulator-name = "VPLL";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vpll2 {
	regulator-name = "VSDI_CSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vsim {
	regulator-name = "VMMC2_IO_18";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vio {
	regulator-name = "VIO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;

};

&vintana1 {
	regulator-name = "VINTANA1";
	/* fixed to 1500000 */
	regulator-always-on;
};

&vintana2 {
	regulator-name = "VINTANA2";
	regulator-min-microvolt = <2750000>;
	regulator-max-microvolt = <2750000>;
	regulator-always-on;
};

&vintdig {
	regulator-name = "VINTDIG";
	/* fixed to 1500000 */
	regulator-always-on;
};

&twl {
	twl_audio: audio {
		compatible = "ti,twl4030-audio";
		ti,enable-vibra = <1>;
	};
};

&twl_gpio {
	ti,pullups	= <0x0>;
	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	tlv320aic3x: tlv320aic3x@18 {
		compatible = "ti,tlv320aic3x";
		reg = <0x18>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
		ai3x-gpio-func = <
			0 /* AIC3X_GPIO1_FUNC_DISABLED */
			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
		>;

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tlv320aic3x_aux: tlv320aic3x@19 {
		compatible = "ti,tlv320aic3x";
		reg = <0x19>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	lp5523: lp5523@32 {
		compatible = "national,lp5523";
		reg = <0x32>;
		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

		chan0 {
			chan-name = "lp5523:kb1";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan1 {
			chan-name = "lp5523:kb2";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan2 {
			chan-name = "lp5523:kb3";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan3 {
			chan-name = "lp5523:kb4";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan4 {
			chan-name = "lp5523:b";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan5 {
			chan-name = "lp5523:g";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan6 {
			chan-name = "lp5523:r";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan7 {
			chan-name = "lp5523:kb5";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan8 {
			chan-name = "lp5523:kb6";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};
	};

	bq27200: bq27200@55 {
		compatible = "ti,bq27200";
		reg = <0x55>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};

/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&vaux3>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	non-removable;
};

&mmc3 {
	status = "disabled";
};

&gpmc {
	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */

	/* gpio-irq for dma: 65 */

	onenand@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0 0 0x10000000>;

		gpmc,sync-read;
		gpmc,sync-write;
		gpmc,burst-length = <16>;
		gpmc,burst-read;
		gpmc,burst-wrap;
		gpmc,burst-write;
		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <87>;
		gpmc,cs-wr-off-ns = <87>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <10>;
		gpmc,adv-wr-off-ns = <10>;
		gpmc,oe-on-ns = <15>;
		gpmc,oe-off-ns = <87>;
		gpmc,we-on-ns = <0>;
		gpmc,we-off-ns = <87>;
		gpmc,rd-cycle-ns = <112>;
		gpmc,wr-cycle-ns = <112>;
		gpmc,access-ns = <81>;
		gpmc,page-burst-access-ns = <15>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,clk-activation-ns = <5>;
		gpmc,wr-data-mux-bus-ns = <30>;
		gpmc,wr-access-ns = <81>;
		gpmc,sync-clk-ps = <15000>;

		/*
		 * MTD partition table corresponding to Nokia's
		 * Maemo 5 (Fremantle) release.
		 */
		partition@0 {
			label = "bootloader";
			reg = <0x00000000 0x00020000>;
			read-only;
		};
		partition@1 {
			label = "config";
			reg = <0x00020000 0x00060000>;
		};
		partition@2 {
			label = "log";
			reg = <0x00080000 0x00040000>;
		};
		partition@3 {
			label = "kernel";
			reg = <0x000c0000 0x00200000>;
		};
		partition@4 {
			label = "initfs";
			reg = <0x002c0000 0x00200000>;
		};
		partition@5 {
			label = "rootfs";
			reg = <0x004c0000 0x0fb40000>;
		};
	};
};

&mcspi1 {
	/*
	 * For some reason, touchscreen is necessary for screen to work at
	 * all on real hw. It works well without it on emulator.
	 *
	 * Also... order in the device tree actually matters here.
	 */
	tsc2005@0 {
		compatible = "tsc2005";
		spi-max-frequency = <6000000>;
		reg = <0>;
	};
	mipid@2 {
		compatible = "acx565akm";
		spi-max-frequency = <6000000>;
		reg = <2>;

		pinctrl-names = "default";
		pinctrl-0 = <&display_pins>;
	};
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
};

&uart1 {
	status = "disabled";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};
Commit	Line	Data
a4d4b153 PM	1	/*
a4d4b153 PM	2	* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
c3580bc1	3	* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
a4d4b153 PM	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 (or later) as
	7	* published by the Free Software Foundation.
	8	*/
	9
	10	/dts-v1/;
	11
f2e2c9d9	12	#include "omap34xx-hs.dtsi"
a4d4b153 PM	13
	14	/ {
	15	model = "Nokia N900";
c3580bc1	16	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
a4d4b153 PM	17
	18	cpus {
	19	cpu@0 {
	20	cpu0-supply = <&vcc>;
	21	};
	22	};
	23
	24	memory {
	25	device_type = "memory";
	26	reg = <0x80000000 0x10000000>; /* 256 MB */
	27	};
	28
3931c839 SR	29	gpio_keys {
	30	compatible = "gpio-keys";
	31
	32	camera_lens_cover {
	33	label = "Camera Lens Cover";
	34	gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
	35	linux,input-type = <5>; /* EV_SW */
	36	linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
	37	gpio-key,wakeup;
	38	};
	39
	40	camera_focus {
	41	label = "Camera Focus";
	42	gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
	43	linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
	44	gpio-key,wakeup;
	45	};
	46
	47	camera_capture {
	48	label = "Camera Capture";
	49	gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
	50	linux,code = <0xd4>; /* KEY_CAMERA */
	51	gpio-key,wakeup;
	52	};
	53
	54	lock_button {
	55	label = "Lock Button";
	56	gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
	57	linux,code = <0x98>; /* KEY_SCREENLOCK */
	58	gpio-key,wakeup;
	59	};
	60
	61	keypad_slide {
	62	label = "Keypad Slide";
	63	gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
	64	linux,input-type = <5>; /* EV_SW */
	65	linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
	66	gpio-key,wakeup;
	67	};
	68
	69	proximity_sensor {
	70	label = "Proximity Sensor";
	71	gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
	72	linux,input-type = <5>; /* EV_SW */
	73	linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
	74	};
	75	};
	76
a4d4b153 PM	77	};
a4d4b153 PM	78
ac888a88 SR	79	&omap3_pmx_core {
	80	pinctrl-names = "default";
	81
7a89eecf SR	82	uart2_pins: pinmux_uart2_pins {
	83	pinctrl-single,pins = <
	84	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx */
	85	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx */
	86	>;
	87	};
	88
	89	uart3_pins: pinmux_uart3_pins {
	90	pinctrl-single,pins = <
	91	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx */
	92	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx */
	93	>;
	94	};
	95
ac888a88 SR	96	i2c1_pins: pinmux_i2c1_pins {
	97	pinctrl-single,pins = <
	98	0x18a (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	99	0x18c (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	100	>;
	101	};
	102
	103	i2c2_pins: pinmux_i2c2_pins {
	104	pinctrl-single,pins = <
	105	0x18e (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
	106	0x190 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
	107	>;
	108	};
	109
	110	i2c3_pins: pinmux_i2c3_pins {
	111	pinctrl-single,pins = <
	112	0x192 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
	113	0x194 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
	114	>;
	115	};
f1751cff SR	116
	117	mmc1_pins: pinmux_mmc1_pins {
	118	pinctrl-single,pins = <
	119	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	120	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd */
	121	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0 */
	122	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	123	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	124	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
	125	>;
	126	};
d1e6f516	127
edd5eb4e TL	128	mmc2_pins: pinmux_mmc2_pins {
	129	pinctrl-single,pins = <
	130	0x128 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_clk */
	131	0x12a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_cmd */
	132	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat0 */
	133	0x12e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat1 */
	134	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat2 */
	135	0x132 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat3 */
	136	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat4 */
	137	0x136 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat5 */
	138	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat6 */
	139	0x13a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat7 */
	140	>;
	141	};
	142
d1e6f516 SR	143	display_pins: pinmux_display_pins {
	144	pinctrl-single,pins = <
	145	0x0d4 (PIN_OUTPUT \| MUX_MODE4) /* RX51_LCD_RESET_GPIO */
	146	>;
	147	};
ac888a88 SR	148	};
ac888a88 SR	149
a4d4b153	150	&i2c1 {
ac888a88 SR	151	pinctrl-names = "default";
	152	pinctrl-0 = <&i2c1_pins>;
	153
a4d4b153 PM	154	clock-frequency = <2200000>;
	155
	156	twl: twl@48 {
	157	reg = <0x48>;
	158	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	159	interrupt-parent = <&intc>;
	160	};
	161	};
	162
	163	#include "twl4030.dtsi"
ac888a88	164	#include "twl4030_omap3.dtsi"
a4d4b153	165
9cdbbadd SR	166	&vaux1 {
	167	regulator-name = "V28";
	168	regulator-min-microvolt = <2800000>;
	169	regulator-max-microvolt = <2800000>;
	170	regulator-always-on; /* due battery cover sensor */
	171	};
	172
	173	&vaux2 {
	174	regulator-name = "VCSI";
	175	regulator-min-microvolt = <1800000>;
	176	regulator-max-microvolt = <1800000>;
	177	};
	178
	179	&vaux3 {
	180	regulator-name = "VMMC2_30";
	181	regulator-min-microvolt = <2800000>;
	182	regulator-max-microvolt = <3000000>;
	183	};
	184
	185	&vaux4 {
	186	regulator-name = "VCAM_ANA_28";
	187	regulator-min-microvolt = <2800000>;
	188	regulator-max-microvolt = <2800000>;
	189	};
	190
	191	&vmmc1 {
	192	regulator-name = "VMMC1";
	193	regulator-min-microvolt = <1850000>;
	194	regulator-max-microvolt = <3150000>;
	195	};
	196
	197	&vmmc2 {
	198	regulator-name = "V28_A";
	199	regulator-min-microvolt = <2800000>;
	200	regulator-max-microvolt = <3000000>;
	201	regulator-always-on; /* due VIO leak to AIC34 VDDs */
	202	};
	203
	204	&vpll1 {
	205	regulator-name = "VPLL";
	206	regulator-min-microvolt = <1800000>;
	207	regulator-max-microvolt = <1800000>;
	208	regulator-always-on;
	209	};
	210
	211	&vpll2 {
	212	regulator-name = "VSDI_CSI";
	213	regulator-min-microvolt = <1800000>;
	214	regulator-max-microvolt = <1800000>;
	215	regulator-always-on;
	216	};
	217
	218	&vsim {
	219	regulator-name = "VMMC2_IO_18";
	220	regulator-min-microvolt = <1800000>;
	221	regulator-max-microvolt = <1800000>;
	222	};
	223
	224	&vio {
	225	regulator-name = "VIO";
	226	regulator-min-microvolt = <1800000>;
	227	regulator-max-microvolt = <1800000>;
	228
	229	};
230
231	&vintana1 {
232	regulator-name = "VINTANA1";
233	/* fixed to 1500000 */
234	regulator-always-on;
235	};
236
237	&vintana2 {
238	regulator-name = "VINTANA2";
239	regulator-min-microvolt = <2750000>;
240	regulator-max-microvolt = <2750000>;
241	regulator-always-on;
242	};
243
244	&vintdig {
245	regulator-name = "VINTDIG";
246	/* fixed to 1500000 */
247	regulator-always-on;
248	};
249
06ba7a61 SR	250	&twl {
	251	twl_audio: audio {
	252	compatible = "ti,twl4030-audio";
	253	ti,enable-vibra = <1>;
	254	};
	255	};
	256
a4d4b153 PM	257	&twl_gpio {
	258	ti,pullups = <0x0>;
	259	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) \| BIT(8..17) */
	260	};
	261
	262	&i2c2 {
ac888a88 SR	263	pinctrl-names = "default";
	264	pinctrl-0 = <&i2c2_pins>;
	265
48fc9864	266	clock-frequency = <100000>;
b2b9b258	267
14e3e295 SR	268	tlv320aic3x: tlv320aic3x@18 {
	269	compatible = "ti,tlv320aic3x";
	270	reg = <0x18>;
	271	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	272	ai3x-gpio-func = <
	273	0 /* AIC3X_GPIO1_FUNC_DISABLED */
	274	5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
	275	>;
	276
	277	AVDD-supply = <&vmmc2>;
	278	DRVDD-supply = <&vmmc2>;
	279	IOVDD-supply = <&vio>;
	280	DVDD-supply = <&vio>;
	281	};
	282
	283	tlv320aic3x_aux: tlv320aic3x@19 {
	284	compatible = "ti,tlv320aic3x";
	285	reg = <0x19>;
	286	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	287
	288	AVDD-supply = <&vmmc2>;
	289	DRVDD-supply = <&vmmc2>;
	290	IOVDD-supply = <&vio>;
	291	DVDD-supply = <&vio>;
	292	};
	293
a0bf1f3e SR	294	lp5523: lp5523@32 {
	295	compatible = "national,lp5523";
	296	reg = <0x32>;
	297	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
	298	enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
	299
	300	chan0 {
	301	chan-name = "lp5523:kb1";
	302	led-cur = /bits/ 8 <50>;
	303	max-cur = /bits/ 8 <100>;
	304	};
	305
	306	chan1 {
	307	chan-name = "lp5523:kb2";
	308	led-cur = /bits/ 8 <50>;
	309	max-cur = /bits/ 8 <100>;
	310	};
	311
	312	chan2 {
	313	chan-name = "lp5523:kb3";
	314	led-cur = /bits/ 8 <50>;
	315	max-cur = /bits/ 8 <100>;
	316	};
	317
	318	chan3 {
	319	chan-name = "lp5523:kb4";
	320	led-cur = /bits/ 8 <50>;
	321	max-cur = /bits/ 8 <100>;
	322	};
	323
	324	chan4 {
	325	chan-name = "lp5523:b";
	326	led-cur = /bits/ 8 <50>;
	327	max-cur = /bits/ 8 <100>;
	328	};
	329
	330	chan5 {
	331	chan-name = "lp5523:g";
	332	led-cur = /bits/ 8 <50>;
	333	max-cur = /bits/ 8 <100>;
	334	};
	335
	336	chan6 {
	337	chan-name = "lp5523:r";
	338	led-cur = /bits/ 8 <50>;
	339	max-cur = /bits/ 8 <100>;
	340	};
	341
	342	chan7 {
	343	chan-name = "lp5523:kb5";
	344	led-cur = /bits/ 8 <50>;
	345	max-cur = /bits/ 8 <100>;
	346	};
	347
	348	chan8 {
	349	chan-name = "lp5523:kb6";
	350	led-cur = /bits/ 8 <50>;
	351	max-cur = /bits/ 8 <100>;
	352	};
	353	};
	354
b2b9b258 SR	355	bq27200: bq27200@55 {
	356	compatible = "ti,bq27200";
	357	reg = <0x55>;
	358	};
a4d4b153 PM	359	};
	360
	361	&i2c3 {
ac888a88 SR	362	pinctrl-names = "default";
	363	pinctrl-0 = <&i2c3_pins>;
	364
48fc9864	365	clock-frequency = <400000>;
a4d4b153 PM	366	};
	367
	368	&mmc1 {
f1751cff SR	369	pinctrl-names = "default";
	370	pinctrl-0 = <&mmc1_pins>;
	371	vmmc-supply = <&vmmc1>;
	372	bus-width = <4>;
	373	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
a4d4b153 PM	374	};
a4d4b153 PM	375
edd5eb4e	376	/* most boards use vaux3, only some old versions use vmmc2 instead */
a4d4b153	377	&mmc2 {
edd5eb4e TL	378	pinctrl-names = "default";
	379	pinctrl-0 = <&mmc2_pins>;
	380	vmmc-supply = <&vaux3>;
	381	vmmc_aux-supply = <&vsim>;
	382	bus-width = <8>;
	383	non-removable;
a4d4b153 PM	384	};
	385
	386	&mmc3 {
	387	status = "disabled";
	388	};
	389
8699d2dd SR	390	&gpmc {
	391	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
	392
	393	/* gpio-irq for dma: 65 */
	394
	395	onenand@0,0 {
	396	#address-cells = <1>;
	397	#size-cells = <1>;
	398	reg = <0 0 0x10000000>;
	399
	400	gpmc,sync-read;
	401	gpmc,sync-write;
	402	gpmc,burst-length = <16>;
	403	gpmc,burst-read;
	404	gpmc,burst-wrap;
	405	gpmc,burst-write;
	406	gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
	407	gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
	408	gpmc,cs-on-ns = <0>;
	409	gpmc,cs-rd-off-ns = <87>;
	410	gpmc,cs-wr-off-ns = <87>;
	411	gpmc,adv-on-ns = <0>;
	412	gpmc,adv-rd-off-ns = <10>;
	413	gpmc,adv-wr-off-ns = <10>;
	414	gpmc,oe-on-ns = <15>;
	415	gpmc,oe-off-ns = <87>;
	416	gpmc,we-on-ns = <0>;
	417	gpmc,we-off-ns = <87>;
	418	gpmc,rd-cycle-ns = <112>;
	419	gpmc,wr-cycle-ns = <112>;
	420	gpmc,access-ns = <81>;
	421	gpmc,page-burst-access-ns = <15>;
	422	gpmc,bus-turnaround-ns = <0>;
	423	gpmc,cycle2cycle-delay-ns = <0>;
	424	gpmc,wait-monitoring-ns = <0>;
	425	gpmc,clk-activation-ns = <5>;
	426	gpmc,wr-data-mux-bus-ns = <30>;
	427	gpmc,wr-access-ns = <81>;
	428	gpmc,sync-clk-ps = <15000>;
	429
	430	/*
	431	* MTD partition table corresponding to Nokia's
	432	* Maemo 5 (Fremantle) release.
	433	*/
	434	partition@0 {
	435	label = "bootloader";
	436	reg = <0x00000000 0x00020000>;
	437	read-only;
	438	};
	439	partition@1 {
	440	label = "config";
	441	reg = <0x00020000 0x00060000>;
	442	};
	443	partition@2 {
	444	label = "log";
	445	reg = <0x00080000 0x00040000>;
	446	};
	447	partition@3 {
	448	label = "kernel";
	449	reg = <0x000c0000 0x00200000>;
	450	};
	451	partition@4 {
	452	label = "initfs";
	453	reg = <0x002c0000 0x00200000>;
454	};
455	partition@5 {
456	label = "rootfs";
457	reg = <0x004c0000 0x0fb40000>;
458	};
459	};
460	};
461
a4d4b153 PM	462	&mcspi1 {
	463	/*
	464	* For some reason, touchscreen is necessary for screen to work at
	465	* all on real hw. It works well without it on emulator.
	466	*
	467	* Also... order in the device tree actually matters here.
	468	*/
	469	tsc2005@0 {
	470	compatible = "tsc2005";
	471	spi-max-frequency = <6000000>;
	472	reg = <0>;
	473	};
	474	mipid@2 {
	475	compatible = "acx565akm";
	476	spi-max-frequency = <6000000>;
	477	reg = <2>;
d1e6f516 SR	478
	479	pinctrl-names = "default";
	480	pinctrl-0 = <&display_pins>;
a4d4b153 PM	481	};
	482	};
	483
	484	&usb_otg_hs {
	485	interface-type = <0>;
	486	usb-phy = <&usb2_phy>;
d2afcf09 RQ	487	phys = <&usb2_phy>;
d2afcf09 RQ	488	phy-names = "usb2-phy";
a4d4b153 PM	489	mode = <2>;
	490	power = <50>;
	491	};
7a89eecf SR	492
	493	&uart1 {
	494	status = "disabled";
	495	};
	496
	497	&uart2 {
	498	pinctrl-names = "default";
	499	pinctrl-0 = <&uart2_pins>;
	500	};
	501
	502	&uart3 {
	503	pinctrl-names = "default";
	504	pinctrl-0 = <&uart3_pins>;
	505	};