wireless-ap: Enable ACS only for ath* devices

[people/ms/network.git] / src / hooks / ports / wireless-ap

#!/bin/bash
###############################################################################
#                                                                             #
# IPFire.org - A linux based firewall                                         #
# Copyright (C) 2010  Michael Tremer & Christian Schmidt                      #
#                                                                             #
# This program is free software: you can redistribute it and/or modify        #
# it under the terms of the GNU General Public License as published by        #
# the Free Software Foundation, either version 3 of the License, or           #
# (at your option) any later version.                                         #
#                                                                             #
# This program is distributed in the hope that it will be useful,             #
# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
# GNU General Public License for more details.                                #
#                                                                             #
# You should have received a copy of the GNU General Public License           #
# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
#                                                                             #
###############################################################################

. /usr/lib/network/header-port

HOOK_PORT_PATTERN="${PORT_PATTERN_ACCESSPOINT}"

HOOK_SETTINGS="ADDRESS BROADCAST_SSID CHANNEL CHANNEL_BANDWIDTH DFS MODE PHY"
HOOK_SETTINGS="${HOOK_SETTINGS} ENCRYPTION KEY SSID"

ADDRESS=$(mac_generate)
BROADCAST_SSID=on
CHANNEL=
CHANNEL_BANDWIDTH=
ENCRYPTION=""
KEY=""
SSID=

# Perform radar detection by default when possible
DFS="on"

hook_check_settings() {
	assert isset ADDRESS
	assert ismac ADDRESS
	assert isset BROADCAST_SSID
	assert isbool BROADCAST_SSID
	assert isset CHANNEL
	assert isbool DFS
	assert isset MODE
	assert isoneof MODE ${HOSTAPD_SUPPORTED_MODES}
	assert isset PHY
	assert ismac PHY
	assert isset SSID

	if isset ENCRYPTION; then
		assert isoneof ENCRYPTION WPA WPA2 WPA/WPA2

		assert isset KEY
		assert [ ${#KEY} -ge 8 ]
		assert [ ${#KEY} -le 63 ]
	fi
}

hook_parse_cmdline() {
	while [ $# -gt 0 ]; do
		case "${1}" in
			--broadcast-ssid=*)
				BROADCAST_SSID=$(cli_get_val "${1}")
				;;
			--channel=*)
				CHANNEL=$(cli_get_val "${1}")
				;;
			--channel-bandwidth=*)
				CHANNEL_BANDWIDTH="$(cli_get_val "${1}")"
				;;
			--dfs=*)
				DFS="$(cli_get_val "${1}")"

				if enabled DFS; then
					DFS="on"
				elif disabled DFS; then
					DFS="off"
				else
					error "Invalid value for DFS: ${DFS}"
					return ${EXIT_ERROR}
				fi
				;;
			--encryption=*)
				ENCRYPTION=$(cli_get_val "${1}")
				;;
			--key=*)
				KEY=$(cli_get_val "${1}")
				;;
			--mac=*)
				ADDRESS=$(cli_get_val "${1}")
				;;
			--mode=*)
				MODE=$(cli_get_val "${1}")

				if ! isoneof MODE ${HOSTAPD_SUPPORTED_MODES}; then
					error "Unsupported mode: ${MODE}"
					error "Mode must be one of ${HOSTAPD_SUPPORTED_MODES}"
					return ${EXIT_ERROR}
				fi
				;;
			--phy=*)
				PHY=$(cli_get_val "${1}")
				;;
			--ssid=*)
				SSID=$(cli_get_val "${1}")
				;;
			*)
				warning "Ignoring unknown argument '${1}'"
				;;
		esac
		shift
	done

	# Generate a random MAC address if none is set
	if ! isset ADDRESS; then
		ADDRESS="$(mac_generate)"
	fi

	# MODE must be set
	if ! isset MODE; then
		error "--mode is not set"
		return ${EXIT_ERROR}
	fi

	# Automatically enable ACS if no channel is set and ACS is available
	if ! isset CHANNEL && phy_supports_acs "${PHY}"; then
		CHANNEL="0"

		log INFO "Automatic Channel Selection (ACS) enabled"
	fi

	# Channel bandwidth must match the mode
	if isset CHANNEL_BANDWIDTH && ! wireless_channel_bandwidth_is_valid "${MODE}" "${CHANNEL_BANDWIDTH}"; then
		error "Channel Bandwidth '${CHANNEL_BANDWIDTH}' is not supported for ${MODE}"
		return ${EXIT_ERROR}
	fi

	# Save address of phy do identify it again
	PHY=$(phy_get ${PHY})
	PHY=$(phy_get_address ${PHY})
}

hook_edit() {
	local port=${1}
	assert isset port

	if ! hook_default_edit "$@"; then
		return ${EXIT_ERROR}
	fi

	# To apply all changes, we need to restart the port
	port_restart "${port}"
}

hook_create() {
	local port="${1}"
	assert isset port

	device_exists "${port}" && exit ${EXIT_OK}

	port_settings_read "${port}" ${HOOK_SETTINGS}

	# Check if the PHY is present.
	local phy=$(phy_get ${PHY})
	if ! isset phy; then
		log DEBUG "phy '${PHY}' is not present"
		exit ${EXIT_ERROR}
	fi

	# Create the wireless device
	wireless_create "${port}" \
		--phy="${phy}" \
		--type="ap" \
		--address="${ADDRESS}"

	exit ${EXIT_OK}
}

hook_remove() {
	local port="${1}"
	assert isset port

	# Remove the device if present
	if device_exists "${port}"; then
		wireless_remove "${port}"
	fi

	exit ${EXIT_OK}
}

hook_up() {
	local port="${1}"
	assert isset port

	# The port must already exist before
	# hostapd is started. Otherwise it will
	# fail horribly over and over again.
	assert device_exists "${port}"

	hostapd_start "${port}"
}

hook_down() {
	local port="${1}"
	assert isset port

	hostapd_stop "${port}"
}

hook_hotplug() {
	local port="${1}"
	assert isset port

	case "$(hotplug_action)" in
		add)
			# Create the port when the phy is plugged in
			if hotplug_event_port_uses_phy "${port}"; then
				hook_create "${port}"
			fi
			;;

		remove)
			# Stop hostapd
			if hotplug_event_port_is_interface "${port}"; then
				hostapd_stop "${port}"

				exit ${EXIT_OK}
			fi
			;;
	esac

	exit ${EXIT_NOT_HANDLED}
}