hostapd: Enable WMM by default.

[people/ms/network.git] / functions.device

#!/bin/bash
###############################################################################
#                                                                             #
# IPFire.org - A linux based firewall                                         #
# Copyright (C) 2010  Michael Tremer & Christian Schmidt                      #
#                                                                             #
# This program is free software: you can redistribute it and/or modify        #
# it under the terms of the GNU General Public License as published by        #
# the Free Software Foundation, either version 3 of the License, or           #
# (at your option) any later version.                                         #
#                                                                             #
# This program is distributed in the hope that it will be useful,             #
# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
# GNU General Public License for more details.                                #
#                                                                             #
# You should have received a copy of the GNU General Public License           #
# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
#                                                                             #
###############################################################################

function devicify() {
	local device=${1}

	assert isset device

	if device_exists ${device}; then
		echo "${device}"
		return ${EXIT_OK}
	fi

	local d
	for d in $(devices_get_all); do
		if [ "$(device_get_address ${d})" = "${device}" ]; then
			echo "${d}"
			return ${EXIT_OK}
		fi
	done

	return ${EXIT_ERROR}
}

function macify() {
	local device=${1}

	assert isset device

	if mac_is_valid ${device}; then
		echo "${device}"
		return ${EXIT_OK}
	fi

	if device_exists ${device}; then
		device_get_address ${device}
		return ${EXIT_OK}
	fi

	return ${EXIT_ERROR}
}

# Check if the device exists
function device_exists() {
	local device=${1}

	# If device name was not found, exit.
	[ -n "${device}" ] || return ${EXIT_ERROR}

	# Check for a normal network device.
	[ -d "${SYS_CLASS_NET}/${device}" ] && return ${EXIT_OK}

	# If the check above, did not find a result,
	# we check for serial devices.
	serial_exists ${device}
}

function device_delete() {
	local device=${1}
	assert isset device

	# Nothing to do, it device does not exist.
	device_exists ${device} || return ${EXIT_OK}

	# Delete the device.
	cmd_quiet ip link delete ${device}
	local ret=$?

	if [ ${ret} -ne ${EXIT_OK} ]; then
		log ERROR "device: Could not delete device '${device}': ${ret}"
		return ${EXIT_ERROR}
	fi

	return ${ret}
}

function device_has_flag() {
	local device=${1}
	local flag=${2}

	local flags=$(__device_get_file ${device} flags)

	if [[ "$(( ${flags} & ${flag} ))" -eq 0 ]]; then
		return ${EXIT_FALSE}
	else
		return ${EXIT_TRUE}
	fi
}

# Check if the device is up
function device_is_up() {
	local device=${1}

	device_exists ${device} || return ${EXIT_ERROR}

	device_has_flag ${device} 0x1
}

function device_ifindex_to_name() {
	local idx=${1}
	assert isset idx

	local device device_idx
	for device in ${SYS_CLASS_NET}/*; do
		device=$(basename ${device})
		device_exists ${device} || continue

		device_idx=$(device_get_ifindex ${device})

		if [ "${device_idx}" = "${idx}" ]; then
			print "${device}"
			return ${EXIT_OK}
		fi
	done

	return ${EXIT_ERROR}
}

function device_get_ifindex() {
	local device=${1}
	assert isset device

	local path="${SYS_CLASS_NET}/${1}/ifindex"

	# Check if file can be read.
	[ -r "${path}" ] || return ${EXIT_ERROR}

	print "$(<${path})"
}

# Check if the device is a batman-adv bridge
function device_is_batman_adv() {
	[ -d "${SYS_CLASS_NET}/${1}/mesh" ]
}

# Check if the device is a batman-adv bridge port
function device_is_batman_adv_port() {
	[ -d "${SYS_CLASS_NET}/${1}/batman_adv" ]
}

# Check if the device is a bonding device
function device_is_bonding() {
	[ -d "/sys/class/net/${1}/bonding" ]
}

# Check if the device bonded in a bonding device
function device_is_bonded() {
	local device=${1}

	[ -d "${SYS_CLASS_NET}/${device}/master" ]
}

# Check if the device is a bridge
function device_is_bridge() {
	[ -d "/sys/class/net/${1}/bridge" ]
}

function device_is_bridge_attached() {
	local device=${1}
	[ -d "${SYS_CLASS_NET}/${device}/brport" ]
}

function device_get_bridge() {
	local device=${1}
	assert isset device

	# Check if device is attached to a bridge.
	device_is_bridge_attached ${device} || return ${EXIT_ERROR}

	local ifindex_path="${SYS_CLASS_NET}/${device}/brport/bridge/ifindex"
	[ -r "${ifindex_path}" ] || return ${EXIT_ERROR}

	local ifindex=$(<${ifindex_path})
	assert isset ifindex

	device_ifindex_to_name ${ifindex}
}

# Check if the device is a vlan device
function device_is_vlan() {
	local device=${1}
	assert isset device

	[ -e "${PROC_NET_VLAN}/${device}" ]
}

# Check if the device has vlan devices
function device_has_vlans() {
	local device=${1}
	assert isset device

	if device_is_vlan ${device}; then
		return ${EXIT_FALSE}
	fi

	local vlans=$(device_get_vlans ${device})
	[ -n "${vlans}" ] && return ${EXIT_OK} || return ${EXIT_ERROR}
}

function device_get_vlans() {
	local device=${1}
	assert isset device

	# If no 8021q module has been loaded into the kernel,
	# we cannot do anything.
	[ -r "${PROC_NET_VLAN_CONFIG}" ] || return ${EXIT_OK}

	local dev spacer1 id spacer2 parent
	while read dev spacer1 id spacer2 parent; do
		[ "${parent}" = "${device}" ] || continue

		print "${dev}"
	done < ${PROC_NET_VLAN_CONFIG}
}

# Check if the device is a ppp device
function device_is_ppp() {
	local device=${1}

	local type=$(__device_get_file ${device} type)

	[ "${type}" = "512" ] && return ${EXIT_OK} || return ${EXIT_ERROR}
}

# Check if the device is a pointopoint device.
function device_is_ptp() {
	local device=${1}

	device_has_flag ${device} 0x10
}

# Check if the device is a loopback device
function device_is_loopback() {
	local device=${1}

	[ "${device}" = "lo" ]
}

# Check if the device is a wireless device
function device_is_wireless() {
	local device=${1}

	[ -d "${SYS_CLASS_NET}/${device}/phy80211" ]
}

function device_is_serial() {
	serial_exists $@
}

# Check if the device is a physical network interface
function device_is_ethernet() {
	local device=${1}

	device_is_loopback ${device} && \
		return ${EXIT_ERROR}

	device_is_bonding ${device} &&  \
		return ${EXIT_ERROR}

	device_is_bridge ${device} && \
		return ${EXIT_ERROR}

	device_is_ppp ${device} && \
		return ${EXIT_ERROR}

	device_is_vlan ${device} && \
		return ${EXIT_ERROR}

	[ "$(__device_get_file ${device} type)" != "1" ] && \
		return ${EXIT_ERROR}

	return ${EXIT_OK}
}

# Get the device type
function device_get_type() {
	local device=${1}

	if device_is_vlan ${device}; then
		echo "vlan"

	elif device_is_bonding ${device}; then
		echo "bonding"

	elif device_is_bridge ${device}; then
		echo "bridge"

	elif device_is_ppp ${device}; then
		echo "ppp"

	elif device_is_batman_adv ${device}; then
		echo "batman-adv"

	elif device_is_batman_adv_port ${device}; then
		echo "batman-adv-port"

	elif device_is_loopback ${device}; then
		echo "loopback"

	elif device_is_wireless ${device}; then
		echo "wireless"

	elif device_is_ethernet ${device}; then
		echo "ethernet"

	elif device_is_serial ${device}; then
		echo "serial"

	else
		echo "unknown"
	fi
}

function device_get_status() {
	local device=${1}
	assert isset device

	local status=${STATUS_DOWN}

	if device_is_up ${device}; then
		status=${STATUS_UP}

		if ! device_has_carrier ${device}; then
			status=${STATUS_NOCARRIER}
		fi
	fi

	echo "${status}"
}

function device_get_address() {
	local device=${1}

	cat ${SYS_CLASS_NET}/${device}/address 2>/dev/null
}

function device_set_address() {
	local device=${1}
	local addr=${2}
	
	if ! device_exists ${device}; then
		error "Device '${device}' does not exist."
		return ${EXIT_ERROR}
	fi

	log INFO "Setting address of '${device}' to '${addr}' - was $(device_get_address ${device})."

	local up
	if device_is_up ${device}; then
		device_set_down ${device}
		up=1
	fi

	ip link set ${device} address ${addr}
	local ret=$?

	if [ "${up}" = "1" ]; then
		device_set_up ${device}
	fi

	if [ "${ret}" != "0" ]; then
		error_log "Could not set address '${addr}' on device '${device}'."
	fi

	return ${ret}
}

function device_get() {
	local device
	local devices

	for device in ${SYS_CLASS_NET}/*; do
		device=$(basename ${device})

		# bonding_masters is no device
		[ "${device}" = "bonding_masters" ] && continue

		devices="${devices} ${device}"
	done

	echo ${devices}
	return ${EXIT_OK}
}

function devices_get_all() {
	device_get
}

# Check if a device has a cable plugged in
function device_has_carrier() {
	local device=${1}
	assert isset device

	local carrier=$(__device_get_file ${device} carrier)
	[ "${carrier}" = "1" ]
}

function device_is_promisc() {
	local device=${1}

	device_has_flag ${device} 0x200
}

function device_set_promisc() {
	local device=${1}
	local state=${2}

	assert device_exists ${device}
	assert isset state
	assert isoneof state on off

	ip link set ${device} promisc ${state}
}

# Check if the device is free
function device_is_free() {
	! device_is_used $@
}

# Check if the device is used
function device_is_used() {
	local device=${1}

	device_has_vlans ${device} && \
		return ${EXIT_OK}
	device_is_bonded ${device} && \
		return ${EXIT_OK}
	device_is_bridge_attached ${device} && \
		return ${EXIT_OK}

	return ${EXIT_ERROR}
}

function device_hash() {
	local device=${1}

	# Get mac address of device and remove all colons (:)
	# that will result in a hash.
	device=$(macify ${device})

	echo "${device//:/}"
}

# Give the device a new name
function device_set_name() {
	local source=$1
	local destination=${2}

	# Check if devices exists
	if ! device_exists ${source} || device_exists ${destination}; then
		return 4
	fi

	local up
	if device_is_up ${source}; then
		ip link set ${source} down
		up=1
	fi

	ip link set ${source} name ${destination}

	if [ "${up}" = "1" ]; then
		ip link set ${destination} up
	fi
}

# Set device up
function device_set_up() {
	local device=${1}

	# Silently fail if device was not found
	[ -z "${device}" ] && return ${EXIT_ERROR}

	# Do nothing if device is already up
	device_is_up ${device} && return ${EXIT_OK}

	device_set_parent_up ${device}

	log DEBUG "Setting up device '${device}'"

	ip link set ${device} up
}

function device_set_parent_up() {
	local device=${1}
	local parent

	if device_is_vlan ${device}; then
		parent=$(vlan_get_parent ${device})

		device_is_up ${parent} && return ${EXIT_OK}

		log DEBUG "Setting up parent device '${parent}' of '${device}'"

		device_set_up ${parent}
		return $?
	fi

	return ${EXIT_OK}
}

# Set device down
function device_set_down() {
	local device=${1}
	assert isset device

	local ret=${EXIT_OK}

	if device_is_up ${device}; then
		log DEBUG "Tearing down device '${device}'"

		ip link set ${device} down
		ret=$?
	fi

	device_set_parent_down ${device}

	return ${ret}
}

function device_set_parent_down() {
	local device=${1}
	local parent

	if device_is_vlan ${device}; then
		parent=$(vlan_get_parent ${device})

		device_is_up ${parent} || return ${EXIT_OK}

		if device_is_free ${parent}; then
			log DEBUG "Tearing down parent device '${parent}' of '${device}'"

			device_set_down ${parent}
		fi
	fi
	
	return ${EXIT_OK}
}

function device_get_mtu() {
	local device=${1}

	if ! device_exists ${device}; then
		error "Device '${device}' does not exist."
		return ${EXIT_ERROR}
	fi

	echo $(<${SYS_CLASS_NET}/${device}/mtu)
}

# Set mtu to a device
function device_set_mtu() {
	local device=${1}
	local mtu=${2}

	if ! device_exists ${device}; then
		error "Device '${device}' does not exist."
		return ${EXIT_ERROR}
	fi
	
	local oldmtu=$(device_get_mtu ${device})

	if [ "${oldmtu}" = "${mtu}" ]; then
		# No need to set mtu.
		return ${EXIT_OK}
	fi

	log INFO "Setting mtu of '${device}' to '${mtu}' - was ${oldmtu}."

	local up
	if device_is_up ${device}; then
		device_set_down ${device}
		up=1
	fi

	ip link set ${device} mtu ${mtu}
	local ret=$?

	if [ "${up}" = "1" ]; then
		device_set_up ${device}
	fi

	if [ "${ret}" != "0" ]; then
		error_log "Could not set mtu '${mtu}' on device '${device}'."
	fi

	return ${ret}
}

function device_discover() {
	local device=${1}

	log INFO "Running discovery process on device '${device}'."

	local hook
	for hook in $(hook_zone_get_all); do
		hook_zone_exec ${hook} discover ${device}
	done
}

function device_has_ip() {
	local device=${1}
	local addr=${2}

	assert isset addr
	assert device_exists ${device}

	# IPv6 addresses must be fully imploded
	local protocol=$(ip_detect_protocol ${addr})
	case "${protocol}" in
		ipv6)
			addr=$(ipv6_implode ${addr})
			;;
	esac

	listmatch ${addr} $(device_get_addresses ${device})
}

function device_get_addresses() {
	local device=${1}

	assert device_exists ${device}

	local prot
	local addr
	local line
	ip addr show ${device} | \
		while read prot addr line; do
			[ "${prot:0:4}" = "inet" ] && echo "${addr}"
		done
}

function __device_get_file() {
	local device=${1}
	local file=${2}

	assert isset device
	assert isset file

	local path="${SYS_CLASS_NET}/${device}/${file}"
	[ -r "${path}" ] || return ${EXIT_ERROR}

	echo "$(<${path})"
}

function device_get_rx_bytes() {
	local device=${1}

	__device_get_file ${device} statistics/rx_bytes
}

function device_get_tx_bytes() {
	local device=${1}

	__device_get_file ${device} statistics/tx_bytes
}

function device_get_rx_packets() {
	local device=${1}

	__device_get_file ${device} statistics/rx_packets
}

function device_get_tx_packets() {
	local device=${1}

	__device_get_file ${device} statistics/tx_packets
}

function device_get_rx_errors() {
	local device=${1}

	__device_get_file ${device} statistics/rx_errors
}

function device_get_tx_errors() {
	local device=${1}

	__device_get_file ${device} statistics/tx_errors
}

function device_get_speed() {
	local device=${1}

	__device_get_file ${device} speed
}

function device_get_duplex() {
	local device=${1}

	__device_get_file ${device} duplex
}