2 ###############################################################################
4 # IPFire.org - A linux based firewall #
5 # Copyright (C) 2017 IPFire Network Development Team #
7 # This program is free software: you can redistribute it and/or modify #
8 # it under the terms of the GNU General Public License as published by #
9 # the Free Software Foundation, either version 3 of the License, or #
10 # (at your option) any later version. #
12 # This program is distributed in the hope that it will be useful, #
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of #
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
15 # GNU General Public License for more details. #
17 # You should have received a copy of the GNU General Public License #
18 # along with this program. If not, see <http://www.gnu.org/licenses/>. #
20 ###############################################################################
22 VPN_SECURITY_POLICIES_CONFIG_SETTINGS
="CIPHER COMPRESSION GROUP_TYPE INTEGRITY KEY_EXCHANGE LIFETIME PFS"
23 VPN_SECURITY_POLICIES_READONLY
="system performance"
25 VPN_DEFAULT_SECURITY_POLICY
="system"
27 declare -A VPN_SUPPORTED_CIPHERS
=(
29 [3DES-CBC
]="168 bit 3DES-EDE-CBC"
32 [AES256-CBC
]="256 bit AES-CBC"
33 [AES192-CBC
]="192 bit AES-CBC"
34 [AES128-CBC
]="128 bit AES-CBC"
37 [AES256-CTR
]="256 bit AES-COUNTER"
38 [AES192-CTR
]="192 bit AES-COUNTER"
39 [AES128-CTR
]="128 bit AES-COUNTER"
42 [AES256-GCM128
]="256 bit AES-GCM with 128 bit ICV"
43 [AES192-GCM128
]="192 bit AES-GCM with 128 bit ICV"
44 [AES128-GCM128
]="128 bit AES-GCM with 128 bit ICV"
45 [AES256-GCM96
]="256 bit AES-GCM with 96 bit ICV"
46 [AES192-GCM96
]="192 bit AES-GCM with 96 bit ICV"
47 [AES128-GCM96
]="128 bit AES-GCM with 96 bit ICV"
48 [AES256-GCM64
]="256 bit AES-GCM with 64 bit ICV"
49 [AES192-GCM64
]="192 bit AES-GCM with 64 bit ICV"
50 [AES128-GCM64
]="128 bit AES-GCM with 64 bit ICV"
53 [AES256-CCM128
]="256 bit AES-CCM with 128 bit ICV"
54 [AES192-CCM128
]="192 bit AES-CCM with 128 bit ICV"
55 [AES128-CCM128
]="128 bit AES-CCM with 128 bit ICV"
56 [AES256-CCM96
]="256 bit AES-CCM with 96 bit ICV"
57 [AES192-CCM96
]="192 bit AES-CCM with 96 bit ICV"
58 [AES128-CCM96
]="128 bit AES-CCM with 96 bit ICV"
59 [AES256-CCM64
]="256 bit AES-CCM with 64 bit ICV"
60 [AES192-CCM64
]="192 bit AES-CCM with 64 bit ICV"
61 [AES128-CCM64
]="128 bit AES-CCM with 64 bit ICV"
64 [CAMELLIA256-CBC
]="256 bit CAMELLIA-CBC"
65 [CAMELLIA192-CBC
]="192 bit CAMELLIA-CBC"
66 [CAMELLIA128-CBC
]="128 bit CAMELLIA-CBC"
69 [CAMELLIA256-CTR
]="256 bit CAMELLIA-COUNTER"
70 [CAMELLIA192-CTR
]="192 bit CAMELLIA-COUNTER"
71 [CAMELLIA128-CTR
]="128 bit CAMELLIA-COUNTER"
74 [CAMELLIA256-GCM128
]="256 bit CAMELLIA-GCM with 128 bit ICV"
75 [CAMELLIA192-GCM128
]="192 bit CAMELLIA-GCM with 128 bit ICV"
76 [CAMELLIA128-GCM128
]="128 bit CAMELLIA-GCM with 128 bit ICV"
77 [CAMELLIA256-GCM96
]="256 bit CAMELLIA-GCM with 96 bit ICV"
78 [CAMELLIA192-GCM96
]="192 bit CAMELLIA-GCM with 96 bit ICV"
79 [CAMELLIA128-GCM96
]="128 bit CAMELLIA-GCM with 96 bit ICV"
80 [CAMELLIA256-GCM64
]="256 bit CAMELLIA-GCM with 64 bit ICV"
81 [CAMELLIA192-GCM64
]="192 bit CAMELLIA-GCM with 64 bit ICV"
82 [CAMELLIA128-GCM64
]="128 bit CAMELLIA-GCM with 64 bit ICV"
85 [CAMELLIA256-CCM128
]="256 bit CAMELLIA-CCM with 128 bit ICV"
86 [CAMELLIA192-CCM128
]="192 bit CAMELLIA-CCM with 128 bit ICV"
87 [CAMELLIA128-CCM128
]="128 bit CAMELLIA-CCM with 128 bit ICV"
88 [CAMELLIA256-CCM96
]="256 bit CAMELLIA-CCM with 96 bit ICV"
89 [CAMELLIA192-CCM96
]="192 bit CAMELLIA-CCM with 96 bit ICV"
90 [CAMELLIA128-CCM96
]="128 bit CAMELLIA-CCM with 96 bit ICV"
91 [CAMELLIA256-CCM64
]="256 bit CAMELLIA-CCM with 64 bit ICV"
92 [CAMELLIA192-CCM64
]="192 bit CAMELLIA-CCM with 64 bit ICV"
93 [CAMELLIA128-CCM64
]="128 bit CAMELLIA-CCM with 64 bit ICV"
96 declare -A CIPHER_TO_STRONGSWAN
=(
101 [AES256-CBC
]="aes256"
102 [AES192-CBC
]="aes192"
103 [AES128-CBC
]="aes128"
106 [AES256-CTR
]="aes256ctr"
107 [AES192-CTR
]="aes192ctr"
108 [AES128-CTR
]="aes128ctr"
111 [AES256-GCM128
]="aes256gcm128"
112 [AES192-GCM128
]="aes192gcm128"
113 [AES128-GCM128
]="aes128gcm128"
114 [AES256-GCM96
]="aes256gcm96"
115 [AES192-GCM96
]="aes192gcm96"
116 [AES128-GCM96
]="aes128gcm96"
117 [AES256-GCM64
]="aes256gcm64"
118 [AES192-GCM64
]="aes192gcm64"
119 [AES128-GCM64
]="aes128gcm64"
122 [AES256-CCM128
]="aes256ccm128"
123 [AES192-CCM128
]="aes192ccm128"
124 [AES128-CCM128
]="aes128ccm128"
125 [AES256-CCM96
]="aes256ccm96"
126 [AES192-CCM96
]="aes192ccm96"
127 [AES128-CCM96
]="aes128ccm96"
128 [AES256-CCM64
]="aes256ccm64"
129 [AES192-CCM64
]="aes192ccm64"
130 [AES128-CCM64
]="aes128ccm64"
133 [CAMELLIA256-CBC
]="camellia256"
134 [CAMELLIA192-CBC
]="camellia192"
135 [CAMELLIA128-CBC
]="camellia128"
138 [CAMELLIA256-CTR
]="camellia256ctr"
139 [CAMELLIA192-CTR
]="camellia192ctr"
140 [CAMELLIA128-CTR
]="camellia128ctr"
143 [CAMELLIA256-GCM128
]="camellia256gcm128"
144 [CAMELLIA192-GCM128
]="camellia192gcm128"
145 [CAMELLIA128-GCM128
]="camellia128gcm128"
146 [CAMELLIA256-GCM96
]="camellia256gcm96"
147 [CAMELLIA192-GCM96
]="camellia192gcm96"
148 [CAMELLIA128-GCM96
]="camellia128gcm96"
149 [CAMELLIA256-GCM64
]="camellia256gcm64"
150 [CAMELLIA192-GCM64
]="camellia192gcm64"
151 [CAMELLIA128-GCM64
]="camellia128gcm64"
154 [CAMELLIA256-CCM128
]="camellia256ccm128"
155 [CAMELLIA192-CCM128
]="camellia192ccm128"
156 [CAMELLIA128-CCM128
]="camellia128ccm128"
157 [CAMELLIA256-CCM96
]="camellia256ccm96"
158 [CAMELLIA192-CCM96
]="camellia192ccm96"
159 [CAMELLIA128-CCM96
]="camellia128ccm96"
160 [CAMELLIA256-CCM64
]="camellia256ccm64"
161 [CAMELLIA192-CCM64
]="camellia192ccm64"
162 [CAMELLIA128-CCM64
]="camellia128ccm64"
165 declare -A VPN_SUPPORTED_INTEGRITY
=(
170 [SHA512
]="512 bit SHA2-HMAC"
171 [SHA384
]="384 bit SHA2-HMAC"
172 [SHA256
]="256 bit SHA2-HMAC"
175 [AES-XCBC
]="AES-XCBC"
176 [AES-CMAC
]="AES-CMAC"
177 [AES256-GMAC
]="256 bit AES-GMAC"
178 [AES192-GMAC
]="192 bit AES-GMAC"
179 [AES128-GMAC
]="128 bit AES-GMAC"
182 declare -A INTEGRITY_TO_STRONGSWAN
=(
194 [AES256-GMAC
]="aes256gmac"
195 [AES192-GMAC
]="aes192gmac"
196 [AES128-GMAC
]="aes128gmac"
199 declare -A VPN_SUPPORTED_GROUP_TYPES
=(
201 [MODP768
]="768 bit Modulo Prime Group"
202 [MODP1024
]="1024 bit Modulo Prime Group"
203 [MODP1536
]="1536 bit Modulo Prime Group"
204 [MODP2048
]="2048 bit Modulo Prime Group"
205 [MODP3072
]="3072 bit Modulo Prime Group"
206 [MODP4096
]="4096 bit Modulo Prime Group"
207 [MODP6144
]="6144 bit Modulo Prime Group"
208 [MODP8192
]="8192 bit Modulo Prime Group"
210 # NIST Elliptic Curve Groups
211 [ECP192
]="192 bit NIST Elliptic Curve Group"
212 [ECP224
]="224 bit NIST Elliptic Curve Group"
213 [ECP256
]="256 bit NIST Elliptic Curve Group"
214 [ECP384
]="384 bit NIST Elliptic Curve Group"
215 [ECP521
]="521 bit NIST Elliptic Curve Group"
217 # Brainpool Elliptic Curve Groups
218 [ECP224BP
]="224 bit Brainpool Elliptic Curve Group"
219 [ECP256BP
]="256 bit Brainpool Elliptic Curve Group"
220 [ECP384BP
]="384 bit Brainpool Elliptic Curve Group"
221 [ECP512BP
]="512 bit Brainpool Elliptic Curve Group"
224 [CURVE25519
]="256 bit Elliptic Curve 25519"
227 declare -A GROUP_TYPE_TO_STRONGSWAN
=(
230 [MODP1024
]="modp1024"
231 [MODP1536
]="modp1536"
232 [MODP2048
]="modp2048"
233 [MODP3072
]="modp3072"
234 [MODP4096
]="modp4096"
235 [MODP6144
]="modp6144"
236 [MODP8192
]="modp8192"
238 # NIST Elliptic Curve Groups
245 # Brainpool Elliptic Curve Groups
246 [ECP224BP
]="ecp224bp"
247 [ECP256BP
]="ecp256bp"
248 [ECP384BP
]="ecp384bp"
249 [ECP512BP
]="ecp512bp"
252 [CURVE25519
]="curve25519"
255 cli_vpn_security_policies
() {
257 local security_policy
259 if vpn_security_policy_exists
${1}; then
265 cipher|compression|integrity|lifetime|pfs|show
)
266 vpn_security_policies_
${key} ${security_policy} $@
269 vpn_security_policies_group_type
${security_policy} $@
272 vpn_security_policies_key_exchange
${security_policy} $@
275 error
"Unrecognized argument: ${key}"
285 vpn_security_policies_new $@
288 vpn_security_policies_destroy $@
291 if [ -n "${action}" ]; then
292 error
"Unrecognized argument: '${action}'"
300 # This functions checks if a policy is readonly
301 # returns true when yes and false when no
302 vpn_security_policies_check_readonly
() {
303 if isoneof name
${VPN_SECURITY_POLICIES_READONLY}; then
310 # This function writes all values to a via ${name} specificated vpn security policy configuration file
311 vpn_security_policies_write_config
() {
316 if ! vpn_security_policy_exists
"${name}"; then
317 log ERROR
"No such vpn security policy: ${name}"
321 if vpn_security_policies_check_readonly
"${name}"; then
322 log ERROR
"The ${name} vpn security policy cannot be changed."
326 local path
="$(vpn_security_policies_path "${name}")"
327 if [ ! -w ${path} ]; then
328 log ERROR
"${path} is not writeable"
332 if ! settings_write
"${path}" ${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}; then
333 log ERROR
"Could not write configuration settings for vpn security policy ${name}"
337 if ! vpn_security_policies_reload
${name}; then
338 log WARNING
"Could not reload the IPsec connection using this security policy"
343 # reload IPsec connections using a special policy
344 vpn_security_policies_reload
() {
348 for connection
in $
(ipsec_list_connections
); do
349 local SECURITY_POLICY ENABLED
351 if ! ipsec_connection_read_config
"${connection}" "SECURITY_POLICY"; then
355 if [[ "${SECURITY_POLICY}" = "${name}" ]] && enabled ENABLED
; then
356 if ! ipsec_connection_to_strongswan
"${connection}"; then
357 log ERROR
"Could not generate strongswan config for ${connnection}"
362 ipsec_strongswan_load
365 # This funtion writes the value for one key to a via ${name} specificated vpn security policy configuration file
366 vpn_security_policies_write_config_key
() {
375 if ! vpn_security_policy_exists
"${name}"; then
376 log ERROR
"No such vpn security policy: ${name}"
380 log DEBUG
"Set '${key}' to new value '${value}' in vpn security policy ${name}"
382 local ${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}
384 # Read the config settings
385 if ! vpn_security_policies_read_config
"${name}"; then
389 # Set the key to a new value
390 assign
"${key}" "${value}"
392 if ! vpn_security_policies_write_config
"${name}"; then
399 # Reads one or more keys out of a settings file or all if no key is provided.
400 vpn_security_policies_read_config
() {
406 if ! vpn_security_policy_exists
"${name}"; then
407 log ERROR
"No such vpn security policy: ${name}"
413 if [ $# -eq 0 ] && [ -n "${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}" ]; then
414 list_append args
${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}
419 local path
="$(vpn_security_policies_path ${name})"
421 if ! settings_read
"${path}" ${args}; then
422 log ERROR
"Could not read settings for vpn security policy ${name}"
427 # Returns the path to a the configuration fora given name
428 vpn_security_policies_path
() {
433 if vpn_security_policies_check_readonly
"${name}"; then
434 echo "${NETWORK_SHARE_DIR}/vpn/security-policies/${name}"
436 echo "${NETWORK_CONFIG_DIR}/vpn/security-policies/${name}"
440 # Print the content of a vpn security policy configuration file in a nice way
441 vpn_security_policies_show
() {
446 local ${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}
447 if ! vpn_security_policies_read_config
${name}; then
451 cli_print_fmt1
0 "Security Policy: ${name}"
454 # This could be done in a loop but a loop is much more complicated
455 # because we print 'Group Types' but the variable is named 'GROUP_TYPES'
456 cli_print_fmt1
1 "Ciphers:"
458 for cipher
in ${CIPHER}; do
459 cli_print_fmt1
2 "${VPN_SUPPORTED_CIPHERS[${cipher}]-${cipher}}"
463 cli_print_fmt1
1 "Integrity:"
465 for integrity
in ${INTEGRITY}; do
466 cli_print_fmt1
2 "${VPN_SUPPORTED_INTEGRITY[${integrity}]-${integrity}}"
470 cli_print_fmt1
1 "Group Types:"
472 for group_type
in ${GROUP_TYPE}; do
473 cli_print_fmt1
2 "${VPN_SUPPORTED_GROUP_TYPES[${group_type}]-${group_type}}"
477 cli_print_fmt1
1 "Key Exchange:" "${KEY_EXCHANGE}"
480 if isinteger LIFETIME
&& [ ${LIFETIME} -gt 0 ]; then
481 cli_print_fmt1
1 "Key Lifetime:" "$(format_time ${LIFETIME})"
483 log ERROR
"The value for Key Lifetime is not a valid integer greater zero."
488 cli_print_fmt1
1 "Perfect Forward Secrecy:" "enabled"
490 cli_print_fmt1
1 "Perfect Forward Secrecy:" "disabled"
495 if enabled COMPRESSION
; then
496 cli_print_fmt1
1 "Compression:" "enabled"
498 cli_print_fmt1
1 "Compression:" "disabled"
503 # This function checks if a vpn security policy exists
504 # Returns True when yes and false when not
505 vpn_security_policy_exists
() {
510 local path
=$
(vpn_security_policies_path
"${name}")
512 [ -f ${path} ] && return ${EXIT_TRUE} || return ${EXIT_FALSE}
516 # This function parses the parameters for the 'cipher' command
517 vpn_security_policies_cipher
(){
521 if [ $# -eq 0 ]; then
522 log ERROR
"You must pass at least one value after cipher"
527 if ! vpn_security_policies_read_config
${name} "CIPHER"; then
531 # Remove duplicated entries to proceed the list safely
532 CIPHER
="$(list_unique ${CIPHER})"
535 local ciphers_removed
538 while [ $# -gt 0 ]; do
543 list_append ciphers_added
"${arg:1}"
546 list_append ciphers_removed
"${arg:1}"
549 list_append ciphers_set
"${arg}"
552 error
"Invalid argument: ${arg}"
559 # Check if the user is trying a mixed operation
560 if ! list_is_empty ciphers_set
&& (! list_is_empty ciphers_added ||
! list_is_empty ciphers_removed
); then
561 error
"You cannot reset the cipher list and add or remove ciphers at the same time"
565 # Set new cipher list
566 if ! list_is_empty ciphers_set
; then
567 # Check if all ciphers are valid
569 for cipher
in ${ciphers_set}; do
570 if ! vpn_security_policies_cipher_supported
${cipher}; then
571 error
"Unsupported cipher: ${cipher}"
576 CIPHER
="${ciphers_set}"
578 # Perform incremental updates
582 # Perform all removals
583 for cipher
in ${ciphers_removed}; do
584 if ! list_remove CIPHER
${cipher}; then
585 warning
"${cipher} was not on the list and could not be removed"
589 for cipher
in ${ciphers_added}; do
590 if vpn_security_policies_cipher_supported
${cipher}; then
591 if ! list_append_unique CIPHER
${cipher}; then
592 warning
"${cipher} is already on the cipher list"
595 warning
"${cipher} is unknown or unsupported and could not be added"
600 # Check if the list contain at least one valid cipher
601 if list_is_empty CIPHER
; then
602 error
"Cannot save an empty cipher list"
607 if ! vpn_security_policies_write_config_key
${name} "CIPHER" ${CIPHER}; then
608 log ERROR
"The changes for the vpn security policy ${name} could not be written."
611 cli_headline
1 "Current cipher list for ${name}:"
612 for cipher
in ${CIPHER}; do
613 cli_print_fmt1
1 "${cipher}" "${VPN_SUPPORTED_CIPHERS[${cipher}]}"
617 # This function parses the parameters for the 'compression' command
618 vpn_security_policies_compression
(){
622 # Check if we get only one argument after compression <name>
623 if [ ! $# -eq 2 ]; then
624 log ERROR
"The number of arguments do not match. Only one argument after compression is allowed."
628 if ! isbool value
; then
629 # We suggest only two values to avoid overburding the user.
630 log ERROR
"Invalid Argument ${value}"
634 vpn_security_policies_write_config_key
"${name}" "COMPRESSION" "${value}"
637 # This function parses the parameters for the 'group-type' command
638 vpn_security_policies_group_type
(){
642 if [ $# -eq 0 ]; then
643 log ERROR
"You must pass at least one value after group-type"
648 if ! vpn_security_policies_read_config
${name} "GROUP_TYPE"; then
652 # Remove duplicated entries to proceed the list safely
653 GROUP_TYPE
="$(list_unique ${GROUP_TYPE})"
655 while [ $# -gt 0 ]; do
659 # Check if the group type is in the list of group types and
660 # check if the list has after removing this group type at leatst one valid value
661 if list_match
${value} ${GROUP_TYPE}; then
662 list_remove GROUP_TYPE
${value}
664 # We do not break here because this error does not break the processing of the next maybe valid values.
665 log ERROR
"Can not remove ${value} from the list of group types because ${value} is not in the list."
670 # Check if the group type is in the list of supported group types.
671 if ! isoneof value
${!VPN_SUPPORTED_GROUP_TYPES[@]}; then
672 # We do not break here because the processing of other maybe valid values are indepent from this error.
673 log ERROR
"${value} is not a supported group type and can thats why not added to the list of group types."
675 if list_match
${value} ${GROUP_TYPE}; then
676 log WARNING
"${value} is already in the list of group-types of this policy."
678 list_append GROUP_TYPE
${value}
686 # Check if the list contain at least one valid group-type
687 if [ $
(list_length
${GROUP_TYPE}) -ge 1 ]; then
688 if ! vpn_security_policies_write_config_key
${name} "GROUP_TYPE" ${GROUP_TYPE}; then
689 log ERROR
"The changes for the vpn security policy ${name} could not be written."
692 log ERROR
"After proceding all group types the list is empty and thats why no changes are written."
697 # This function parses the parameters for the 'integrity' command
698 vpn_security_policies_integrity
(){
702 if [ $# -eq 0 ]; then
703 log ERROR
"You must pass at least one value after integrity."
708 if ! vpn_security_policies_read_config
${name} "INTEGRITY"; then
712 # Remove duplicated entries to proceed the list safely
713 INTEGRITY
="$(list_unique ${INTEGRITY})"
715 while [ $# -gt 0 ]; do
719 # Check if the integrity hash is in the list of integrity hashes and
720 # check if the list has after removing this integrity hash at least one valid value
721 if list_match
${value} ${INTEGRITY}; then
722 list_remove INTEGRITY
${value}
724 # We do not break here because the processing of other maybe valid values are indepent from this error.
725 log ERROR
"Can not remove ${value} from the list of integrity hashes because ${value} is not in the list."
730 # Check if the Ciphers is in the list of supported integrity hashes.
731 if ! isoneof value
${!VPN_SUPPORTED_INTEGRITY[@]}; then
732 # We do not break here because the processing of other maybe valid values are indepent from this error.
733 log ERROR
"${value} is not a supported integrity hash and can thats why not added to the list of integrity hashes."
735 if list_match
${value} ${INTEGRITY}; then
736 log WARNING
"${value} is already in the list of integrety hashes of this policy."
738 list_append INTEGRITY
${value}
746 # Check if the list contain at least one valid group-type
747 if [ $
(list_length
${INTEGRITY}) -ge 1 ]; then
748 if ! vpn_security_policies_write_config_key
${name} "INTEGRITY" ${INTEGRITY}; then
749 log ERROR
"The changes for the vpn security policy ${name} could not be written."
752 log ERROR
"After proceding all integrity hashes the list is empty and thats why no changes are written."
757 # This function parses the parameters for the 'key-exchange' command
758 vpn_security_policies_key_exchange
() {
762 # Check if we get only one argument after key-exchange <name>
763 if [ ! $# -eq 2 ]; then
764 log ERROR
"The number of arguments do not match. Only argument after key-exchange is allowed."
768 if ! isoneof value
"ikev1" "ikev2" "IKEV1" "IKEV2"; then
769 log ERROR
"Invalid Argument ${value}"
773 vpn_security_policies_write_config_key
"${name}" "KEY_EXCHANGE" "${value,,}"
776 # This function parses the parameters for the 'lifetime' command.
777 vpn_security_policies_lifetime
(){
783 # Check if we get only one argument after lifetime <name>
784 if [ ! $# -ge 1 ]; then
785 log ERROR
"The number of arguments do not match you must provide at least one integer value or a valid time with the format <hours>h <minutes>m <seconds>s"
789 if ! isinteger value
; then
790 value
=$
(parse_time $@
)
791 if [ ! $?
-eq 0 ]; then
792 log ERROR
"Parsing the passed time was not sucessful please check the passed values."
797 if [ ${value} -le 0 ]; then
798 log ERROR
"The passed time value must be in the sum greater zero seconds."
802 vpn_security_policies_write_config_key
"${name}" "LIFETIME" "${value}"
805 # This function parses the parameters for the 'pfs' command
806 vpn_security_policies_pfs
(){
810 # Check if we get only one argument after pfs <name>
811 if [ ! $# -eq 2 ]; then
812 log ERROR
"The number of arguments do not match. Only argument after pfs is allowed."
816 if [ ! $# -eq 2 ] ||
! isbool value
; then
817 # We suggest only two values to avoid overburding the user.
818 log ERROR
"Invalid Argument ${value}"
822 vpn_security_policies_write_config_key
"${name}" "PFS" "${value}"
825 # This function checks if a vpn security policy name is valid
826 # Allowed are only A-Za-z0-9
827 vpn_security_policies_check_name
() {
832 [[ ${name} =~
[^
[:alnum
:]$
] ]]
835 # Function that creates based on the paramters one ore more new vpn security policies
836 vpn_security_policies_new
() {
837 if [ $# -gt 1 ]; then
838 error
"Too many arguments"
843 if ! isset name
; then
844 error
"Please provide a name"
848 # Check for duplicates
849 if vpn_security_policy_exists
"${name}"; then
850 error
"The VPN security policy with name ${name} already exists"
854 # Check if name is valid
855 if vpn_security_policies_check_name
"${name}"; then
856 error
"'${name}' contains illegal characters"
860 # Check if we have a read-only policy with the same name
861 if vpn_security_policies_check_readonly
"${name}"; then
862 error
"The VPN security policy ${name} is read-only"
866 # Check if our source policy exists
867 if ! vpn_security_policy_exists
"${VPN_DEFAULT_SECURITY_POLICY}"; then
868 error
"Default VPN Security Policy '${VPN_DEFAULT_SECURITY_POLICY}' does not exist"
872 log DEBUG
"Creating VPN Security Policy ${name}"
874 if copy
"$(vpn_security_policies_path "${VPN_DEFAULT_SECURITY_POLICY}")" \
875 "$(vpn_security_policies_path ${name})"; then
876 log INFO
"VPN Security Policy ${name} successfully created"
878 log ERROR
"Could not create VPN Security Policy ${name}"
882 # Show the newly created policy
883 vpn_security_policies_show
"${name}"
886 # Function that deletes based on the passed parameters one ore more vpn security policies
887 vpn_security_policies_destroy
() {
890 if ! vpn_security_policy_exists
${name}; then
891 log ERROR
"The vpn security policy ${name} does not exist."
895 if vpn_security_policies_check_readonly
${name}; then
896 log ERROR
"The vpn security policy ${name} cannot be deleted."
900 log DEBUG
"Deleting vpn security policy ${name}"
901 settings_remove $
(vpn_security_policies_path
${name})
904 rm -rf "${NETWORK_CACHE_DIR}/vpn/security-policies/${name}"
908 vpn_security_policies_cipher_supported
() {
911 list_match
${cipher} ${!VPN_SUPPORTED_CIPHERS[@]}
914 vpn_security_policies_cipher_is_aead
() {
917 # All CCM and GCM ciphers are AEAD
918 string_match
"[CG]CM" "${cipher}"
921 vpn_security_policies_make_ike_proposal
() {
924 if ! vpn_security_policy_exists
${name}; then
928 local config_path
="$(vpn_security_policies_path ${name})"
929 local cache_path
="${NETWORK_CACHE_DIR}/vpn/security-policies/${name}/ike-proposal"
931 # Get data from cache if possible
932 if file_exists
"${cache_path}" && ! file_is_newer_than "${config_path}" "${cache_path}"; then
933 fread
"${cache_path}"
937 # No or invalid cache data found
938 local proposal
=$
(_vpn_security_policies_make_ike_proposal
"${name}")
940 # Write proposal to cache
941 if ! make_parent_dir
"${cache_path}" || ! fwrite "${cache_path}" "${proposal}"; then
942 log WARNING
"Could not write to cache: ${cache_path}"
948 _vpn_security_policies_make_ike_proposal
() {
951 # Read the config settings
952 local ${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}
953 if ! vpn_security_policies_read_config
"${name}"; then
960 for cipher
in ${CIPHER}; do
962 local _cipher
=${CIPHER_TO_STRONGSWAN[${cipher}]}
964 if ! isset _cipher
; then
965 log WARN
"Unsupported cipher: ${cipher}"
970 for integrity
in ${INTEGRITY}; do
971 local _integrity
=${INTEGRITY_TO_STRONGSWAN[${integrity}]}
973 if ! isset _integrity
; then
974 log WARN
"Unsupported integrity: ${integrity}"
979 for group_type
in ${GROUP_TYPE}; do
980 local _group_type
=${GROUP_TYPE_TO_STRONGSWAN[${group_type}]}
982 if ! isset _group_type
; then
983 log WARN
"Unsupported group-type: ${group_type}"
987 # Put everything together
988 list_append proposals
"${_cipher}-${_integrity}-${_group_type}"
993 # Returns as a comma-separated list
994 list_join proposals
,
997 vpn_security_policies_make_esp_proposal
() {
1000 if ! vpn_security_policy_exists
${name}; then
1001 return ${EXIT_ERROR}
1004 local config_path
="$(vpn_security_policies_path ${name})"
1005 local cache_path
="${NETWORK_CACHE_DIR}/vpn/security-policies/${name}/esp-proposal"
1007 # Get data from cache if possible
1008 if file_exists
"${cache_path}" && ! file_is_newer_than "${config_path}" "${cache_path}"; then
1009 fread
"${cache_path}"
1013 # No or invalid cache data found
1014 local proposal
=$
(_vpn_security_policies_make_esp_proposal
"${name}")
1016 # Write proposal to cache
1017 if ! make_parent_dir
"${cache_path}" || ! fwrite "${cache_path}" "${proposal}"; then
1018 log WARNING
"Could not write to cache: ${cache_path}"
1024 _vpn_security_policies_make_esp_proposal
() {
1027 # Read the config settings
1028 local ${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}
1029 if ! vpn_security_policies_read_config
"${name}"; then
1030 return ${EXIT_ERROR}
1036 for cipher
in ${CIPHER}; do
1038 local _cipher
=${CIPHER_TO_STRONGSWAN[${cipher}]}
1040 if ! isset _cipher
; then
1041 log WARN
"Unsupported cipher: ${cipher}"
1045 if vpn_security_policies_cipher_is_aead
${cipher}; then
1047 for group_type
in ${GROUP_TYPE}; do
1048 local _group_type
=${GROUP_TYPE_TO_STRONGSWAN[${group_type}]}
1050 if ! isset _group_type
; then
1051 log WARN
"Unsupported group-type: ${group_type}"
1055 # Put everything together
1056 list_append proposals
"${_cipher}-${_group_type}"
1060 for integrity
in ${INTEGRITY}; do
1061 local _integrity
=${INTEGRITY_TO_STRONGSWAN[${integrity}]}
1063 if ! isset _integrity
; then
1064 log WARN
"Unsupported integrity: ${integrity}"
1069 for group_type
in ${GROUP_TYPE}; do
1070 local _group_type
=${GROUP_TYPE_TO_STRONGSWAN[${group_type}]}
1072 if ! isset _group_type
; then
1073 log WARN
"Unsupported group-type: ${group_type}"
1077 # Put everything together
1078 list_append proposals
"${_cipher}-${_integrity}-${_group_type}"
1084 # Returns as a comma-separated list
1085 list_join proposals
,
1088 # List all security policies
1089 vpn_security_policies_list_all
() {
1090 local security_policy
1091 for security_policy
in ${NETWORK_SHARE_DIR}/vpn
/security-policies
/*; do
1092 [ -f ${security_policy} ] ||
continue
1093 basename ${security_policy}
1096 # Add all user-defined policies
1097 vpn_security_policies_list_user
1100 vpn_security_policies_list_user
() {
1101 local security_policy
1102 for security_policy
in ${NETWORK_CONFIG_DIR}/vpn
/security-policies
/*; do
1103 [ -f ${security_policy} ] ||
continue
1105 basename ${security_policy}