vlan: Fail when unknown command line parameters are being passed

[people/ms/network.git] / man / network-route-static.txt

diff --git a/man/network-route-static.txt b/man/network-route-static.txt
index c6c3feae2618d4edd0db43e6573ec3ec4c5c782b..43a12779d9f8e051567d2d6dfd917ff1bd70d828 100644 (file)
--- a/man/network-route-static.txt
+++ b/man/network-route-static.txt
@@ -1,15 +1,14 @@
 = network-route-static(8)
-Michael Tremer <michael.tremer@ipfire.org>
 
 == NAME
 network-route-static - Manage Static Routing
 
 == SYNOPSIS
 [verse]
-'network route static' COMMAND ...
-'network route static add' NETWORK [--gateway=GATEWAY,--unreachable,--prohibit,--blackhole] [--mtu=MTU]
-'network route static remove' NETWORK
-'network route static list' [--protocol=ipv6|ipv4]
+`network route static COMMAND ...`
+`network route static add NETWORK [--gateway=GATEWAY,--unreachable,--prohibit,--blackhole] [--mtu=MTU]`
+`network route static remove NETWORK`
+`network route static list` [--protocol=ipv6|ipv4]`
 
 == DESCRIPTION
 This command helps to manage routes.
@@ -21,14 +20,14 @@ The following commands are understood:
        A new route may be added by the 'add' command. It is required to pass a
        valid network prefix NETWORK, which can be either IPv6 or IPv4.
        +
-       For unicast routes, the '--gateway=GATEWAY' option must be passed, where
+       For unicast routes, the `--gateway=GATEWAY` option must be passed, where
        GATEWAY is a valid IP address of the same protocol type as the network
        prefix is.
        +
-       Use '--unreachable', '--prohibit', '--blackhole' can be used to create of
+       Use `--unreachable`, `--prohibit`, `--blackhole` can be used to create of
        that type. See ROUTE TYPES below for more information about these options.
        +
-       The optional '--mtu=MTU' parameter defines the MTU along the path to the
+       The optional `--mtu=MTU` parameter defines the MTU along the path to the
        destination and must be an integer number. This will show you very
        detailed information about the given device.
 
@@ -40,7 +39,7 @@ The following commands are understood:
 'list'::
        Shows a list of all configured routes.
        +
-       Output can be filtered by passing --protocol=[ipv6|ipv4].
+       Output can be filtered by passing `--protocol=[ipv6|ipv4]`.
 
 == ROUTE TYPES
 
@@ -48,7 +47,7 @@ The following commands are understood:
 'unicast'::
        A unicast route is the most common route in routing tables. It is a route to
        a destination network address, which describes the path to the destination.
-       Use the '--gateway=GATEWAY' option to create such a route.
+       Use the `--gateway=GATEWAY` option to create such a route.
 
 'unreachable'::
        When a route is determined and the routing decision process returns a
@@ -63,6 +62,9 @@ The following commands are understood:
        Packets matching this kind of route are silently discarded.
        There will be no ICMP message sent to the source and no packet be forwarded.
 
+== AUTHORS
+Michael Tremer
+
 == SEE ALSO
 link:network[8],
 link:network-route[8],