wireless-ap: Allow setting the wireless environment (indoor/outdoor)

[people/ms/network.git] / src / functions / functions.wireless

diff --git a/src/functions/functions.wireless b/src/functions/functions.wireless
index 9c3ebd0169ddd05e665cab25830e256c3eeca43c..12204c07879b6794c99f94e9d13b0442674cb4ce 100644 (file)
--- a/src/functions/functions.wireless
+++ b/src/functions/functions.wireless
@@ -29,6 +29,17 @@ WIRELESS_DEFAULT_ENCRYPTION_MODE="NONE"
 WIRELESS_VALID_ENCRYPTION_MODES="WPA2-PSK-SHA256 WPA2-PSK \
        WPA-PSK-SHA256 WPA-PSK NONE"
 
+declare -A WIRELESS_CHANNEL_BANDWIDTHS=(
+       ["802.11ac"]="20 40 80 160 80+80"
+       ["802.11a/n"]="20 40"
+       ["802.11a"]="20 40"
+       ["802.11g/n"]="20 40"
+       ["802.11g"]="20 40"
+)
+
+WIRELESS_ENVIRONMENTS=( "indoor+outdoor" "indoor" "outdoor" )
+WIRELESS_DEFAULT_ENVIRONMENT="${WIRELESS_ENVIRONMENTS[0]}"
+
 cli_wireless() {
        local action=${1}
        shift 1
@@ -111,7 +122,7 @@ wireless_create() {
 
        # Set the channel
        if isset channel; then
-               wireless_set_channel "${device}" "${channel}" || return $?
+               wireless_set_channel "${device}" "${channel}" "auto" || return $?
        fi
 
        return ${ret}
@@ -309,9 +320,46 @@ wireless_channel_is_valid() {
        return ${EXIT_FALSE}
 }
 
+wireless_channel_bandwidth_is_valid() {
+       local mode="${1}"
+       assert isset mode
+
+       local bandwidth="${2}"
+       assert isset bandwidth
+
+       local bandwidths="${WIRELESS_CHANNEL_BANDWIDTHS["${mode}"]}"
+
+       list_match "${bandwidth}" ${bandwidths}
+}
+
+wireless_channel_is_ht40_plus() {
+       local channel="${1}"
+       assert isinteger channel
+
+       # 2.4 GHz
+       if [ ${channel} -le 6 ]; then
+               return ${EXIT_TRUE}
+       fi
+
+       return ${EXIT_FALSE}
+}
+
+wireless_channel_is_ht40_minus() {
+       local channel="${1}"
+       assert isinteger channel
+
+       # 2.4 GHz
+       if [ ${channel} -ge 6 ]; then
+               return ${EXIT_TRUE}
+       fi
+
+       return ${EXIT_FALSE}
+}
+
 wireless_set_channel() {
-       local device=${1}
-       local channel=${2}
+       local device="${1}"
+       local channel="${2}"
+       local bandwidth="${3}"
 
        # Check if the device exists
        if ! device_exists "${device}"; then
@@ -325,8 +373,27 @@ wireless_set_channel() {
                return ${EXIT_ERROR}
        fi
 
+       local ht_flag
+       if [ "${bandwidth}" = "auto" ]; then
+               local phy="$(device_get_phy "${device}")"
+
+               # Offset of a 40 MHz channel
+               local ht_offset=5
+
+               if wireless_channel_is_ht40_plus "${channel}" \
+                               && phy_supports_ht_capability "${phy}" "HT40+" \
+                               && phy_supports_channel "${phy}" $(( channel + ht_offset )); then
+                       ht_flag="HT40+"
+
+               elif wireless_channel_is_ht40_minus "${channel}" \
+                               && phy_supports_ht_capability "${phy}" "HT40-" \
+                               && phy_supports_channel "${phy}" $(( channel - ht_offset )); then
+                       ht_flags="HT40-"
+               fi
+       fi
+
        log DEBUG "Setting wireless channel on device '${device}' to channel '${channel}'"
-       cmd iw dev "${device}" set channel "${channel}"
+       cmd iw dev "${device}" set channel "${channel}" "${ht_flag}"
 }
 
 wireless_pre_shared_key_is_valid() {
@@ -345,16 +412,17 @@ wireless_pre_shared_key_is_valid() {
 
                        return ${EXIT_FALSE}
                        ;;
-
-               WEP)
-                       # XXX need to check if the key is entered in
-                       # hex or ascii and then count the bytes
-                       ;;
        esac
 
        return ${EXIT_ERROR}
 }
 
+wireless_client_is_connected() {
+       local device="${1}"
+
+       device_has_carrier "${device}"
+}
+
 wireless_ibss_join() {
        local device=${1}
        assert isset device
@@ -444,3 +512,61 @@ wireless_monitor() {
 
        return ${EXIT_OK}
 }
+
+wireless_get_ht_caps() {
+       local device="${1}"
+       assert isset device
+
+       local phy="$(device_get_phy "${device}")"
+       if ! isset phy; then
+               log ERROR "Could not determine PHY for ${device}"
+               return ${EXIT_ERROR}
+       fi
+
+       network-phy-list-ht-caps "${phy}"
+}
+
+wireless_get_vht_caps() {
+       local device="${1}"
+       assert isset device
+
+       local phy="$(device_get_phy "${device}")"
+       if ! isset phy; then
+               log ERROR "Could not determine PHY for ${device}"
+               return ${EXIT_ERROR}
+       fi
+
+       network-phy-list-vht-caps "${phy}"
+}
+
+wireless_supports_acs() {
+       local device="${1}"
+       assert isset device
+
+       local phy="$(device_get_phy "${device}")"
+       if ! isset phy; then
+               log ERROR "Could not determine PHY for ${device}"
+               return ${EXIT_ERROR}
+       fi
+
+       phy_supports_acs "${phy}"
+}
+
+wireless_supports_dfs() {
+       local device="${1}"
+       assert isset device
+
+       local phy="$(device_get_phy "${device}")"
+       if ! isset phy; then
+               log ERROR "Could not determine PHY for ${device}"
+               return ${EXIT_ERROR}
+       fi
+
+       phy_supports_dfs "${phy}"
+}
+
+wireless_environment_is_valid() {
+       local environment="${1}"
+
+       list_match "${environment}" "${WIRELESS_ENVIRONMENTS[@]}"
+}