network_settings_read
cli_settings() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-settings
exit ${EXIT_OK}
fi
if [ -n "${1}" ]; then
- settings_set $@
+ network_settings_set "$@"
network_settings_write
else
network_settings_print
}
cli_device() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-device
exit ${EXIT_OK}
fi
case "${action}" in
list)
- cli_device_list $@
+ cli_device_list "$@"
;;
*)
local device="${action}"
case "${action}" in
discover)
- cli_device_discover ${device} $@
+ cli_device_discover ${device} "$@"
+ ;;
+ identify)
+ device_identify "${device}" "$@"
;;
monitor)
- cli_device_monitor "${device}" $@
+ cli_device_monitor "${device}" "$@"
;;
status)
cli_device_status ${device}
;;
unlock)
- cli_device_serial_unlock ${device} $@
+ cli_device_serial_unlock ${device} "$@"
;;
ussd)
- cli_device_send_ussd_command "${device}" $@
+ cli_device_send_ussd_command "${device}" "$@"
;;
*)
cli_show_man network-device
cli_print_fmt1 1 "Status" "${status}"
cli_print_fmt1 1 "Type" "${type}"
+ # Print the driver name
+ local driver="$(device_get_driver "${device}")"
+ if isset driver; then
+ cli_print_fmt1 1 "Driver" "${driver}"
+ fi
+
# Ethernet-compatible?
device_is_ethernet_compatible "${device}" &>/dev/null
cli_print_fmt1 1 "Ethernet-compatible" "$(cli_print_bool $?)"
device_is_promisc ${device} &>/dev/null
cli_print_fmt1 1 "Promisc" "$(cli_print_bool $?)"
+
+ # Supports multiqueue?
+ if device_supports_multiqueue ${device}; then
+ cli_print_fmt1 1 "Multiqueue" "Supported"
+ fi
cli_space
+ cli_device_show_queues 2 ${device}
+
# Print all vlan devices.
local vlans=$(device_get_vlans ${device})
if [ -n "${vlans}" ]; then
cli_print_fmt1 1 "Software version" \
"$(modem_get_software_version ${device})"
- if modem_is_mobile ${device}; then
+ # Mobile
+ if modem_is_mobile "${device}"; then
cli_print_fmt1 1 "IMEI" \
"$(modem_get_device_imei ${device})"
- cli_space
-
- cli_headline 2 "Network status"
- modem_sim_status ${device} &>/dev/null
- local sim_status_code=$?
-
- local sim_status="unknown"
- case "${sim_status_code}" in
- ${EXIT_SIM_READY})
- sim_status="SIM ready"
- ;;
- ${EXIT_SIM_PIN})
- sim_status="PIN locked"
- ;;
- ${EXIT_SIM_PUK})
- sim_status="PUK locked"
- ;;
- esac
- cli_print_fmt1 2 "SIM status" "${sim_status}"
-
- if [ ${sim_status_code} -eq ${EXIT_SIM_READY} ]; then
- cli_print_fmt1 2 "IMSI" \
- "$(modem_get_sim_imsi ${device})"
- cli_print_fmt1 2 "Operator" \
- "$(modem_get_network_operator ${device})"
- cli_print_fmt1 2 "Mode" \
- "$(modem_get_network_mode ${device})"
- cli_print_fmt1 2 "Signal quality" \
- "$(modem_get_signal_quality ${device}) dBm"
-
- local ber=$(modem_get_bit_error_rate ${device})
- isset ber || ber="unknown"
- cli_print_fmt1 2 "Bit Error Rate" "${ber}"
- fi
fi
cli_space
+
+ if modem_is_mobile "${device}"; then
+ modem_mobile_network_status "${device}" 2
+ cli_space
+ fi
}
cli_device_status_phy() {
local address="$(phy_get_address "${phy}")"
cli_print_fmt1 1 "Address" "${address}"
+
+ # Show kernel module
+ local driver="$(phy_get_driver "${phy}")"
+ if isset driver; then
+ cli_print_fmt1 1 "Driver" "${driver}"
+ fi
+
cli_space
local devices="$(phy_get_devices "${phy}")"
cli_space
fi
+ cli_headline 2 "Features"
+
+ cli_print_fmt1 2 "Automatic Channel Selection" \
+ "$(phy_supports_acs "${phy}" && print "Supported" || print "Not Supported")"
+ cli_print_fmt1 2 "DFS" \
+ "$(phy_supports_dfs "${phy}" && print "Supported" || print "Not Supported")"
+
+ cli_space
+
return ${EXIT_OK}
}
}
cli_device_serial_unlock() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-device
exit ${EXIT_OK}
fi
}
cli_hostname() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network
exit ${EXIT_OK}
fi
}
cli_port() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-port
exit ${EXIT_OK}
fi
shift 2
case "${action}" in
- edit|create|remove|up|down|status)
- port_${action} "${port}" $@
+ edit|create|remove|up|down|status|identify)
+ port_${action} "${port}" "$@"
+ ;;
+ color)
+ color_cli "port" "${port}" "$@"
+ ;;
+ description)
+ description_cli "port" "${port}" "$@"
;;
*)
error "Unrecognized argument: ${action}"
case "${action}" in
new|destroy)
- port_${action} $@
+ port_${action} "$@"
;;
*)
error "Unrecognized argument: ${action}"
}
cli_zone() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-zone
exit ${EXIT_OK}
fi
local action
local zone
- if zone_name_is_valid ${1}; then
+ if zone_exists ${1}; then
zone=${1}
action=${2}
shift 2
case "${action}" in
port)
- cli_zone_port "${zone}" $@
+ cli_zone_port "${zone}" "$@"
+ ;;
+ rename)
+ cli_zone_rename "${zone}" "$@"
;;
- config|disable|down|edit|enable|status|up)
- zone_${action} ${zone} $@
+ config|disable|down|edit|enable|identify|status|up)
+ zone_${action} ${zone} "$@"
+ ;;
+ color)
+ color_cli "zone" "${zone}" "$@"
+ ;;
+ description)
+ description_cli "zone" ${zone} "$@"
;;
*)
error "Unrecognized argument: ${action}"
case "${action}" in
new)
- cli_zone_new $@
+ cli_zone_new "$@"
;;
destroy)
- cli_zone_destroy $@
- ;;
- list-hooks)
- cli_list_hooks zone $@
+ cli_zone_destroy "$@"
;;
""|*)
if [ -n "${action}" ]; then
}
cli_zone_new() {
- if cli_help_requested $@ || [ $# -lt 2 ]; then
+ if cli_help_requested "$@" || [ $# -lt 2 ]; then
cli_show_man network-zone-new
exit ${EXIT_OK}
fi
- zone_new $@
+ zone_new "$@"
}
# Removes a zone either immediately, if it is currently down,
# or adds a tag that the removal will be done when the zone
# is brought down the next time.
cli_zone_destroy() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-zone
exit ${EXIT_OK}
fi
local zone="${1}"
- assert zone_exists "${zone}"
- if zone_is_up ${zone}; then
- echo "Zone '${zone}' is up and will be removed when it goes down the next time."
- zone_destroy "${zone}"
- else
- echo "Removing zone '${zone}' now..."
- zone_destroy_now "${zone}"
+ # Check if the zone exists
+ if ! zone_exists "${zone}"; then
+ error "Zone '${zone}' does not exist"
+ return ${EXIT_ERROR}
fi
- exit ${EXIT_OK}
+ echo "Removing zone '${zone}'..."
+ zone_destroy "${zone}" || exit $?
}
cli_zone_port() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-zone-port
exit ${EXIT_OK}
fi
case "${action}" in
edit)
- zone_port_edit "${zone}" "${port}" $@
+ zone_port_edit "${zone}" "${port}" "$@"
;;
*)
error "Unrecognised argument: ${action}"
case "${action}" in
attach)
- zone_port_attach "${zone}" $@
+ zone_port_attach "${zone}" "$@"
;;
detach)
- zone_port_detach "${zone}" $@
+ zone_port_detach "${zone}" "$@"
;;
*)
error "Unrecognised argument: ${action}"
exit ${EXIT_OK}
}
+cli_zone_rename() {
+ if cli_help_requested "$@"; then
+ cli_show_man network-zone
+ exit ${EXIT_OK}
+ fi
+
+ local zone="${1}"
+ local name="${2}"
+ shift 2
+
+ if ! isset name; then
+ error "You need to pass a new name"
+ exit ${EXIT_ERROR}
+ fi
+
+ if ! zone_name_is_valid "${name}"; then
+ error "Invalid new zone name: ${name}"
+ exit ${EXIT_ERROR}
+ fi
+
+ # Check if the zone exists
+ if ! zone_exists "${zone}"; then
+ error "Zone ${zone} does not exist"
+ exit ${EXIT_ERROR}
+ fi
+
+ # Check if a zone with the new name already exists
+ if zone_exists "${name}"; then
+ error "Zone ${name} already exists"
+ exit ${EXIT_ERROR}
+ fi
+
+ # Rename
+ if ! zone_rename "${zone}" "${name}"; then
+ error "Could not rename zone ${zone} to ${name}"
+ exit ${EXIT_ERROR}
+ fi
+
+ exit ${EXIT_OK}
+}
+
cli_list_hooks() {
local type=${1}
shift
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-zone
exit ${EXIT_OK}
fi
done | sort -u
}
-cli_route() {
- if cli_help_requested $@; then
- cli_show_man network-route
- exit ${EXIT_OK}
- fi
-
- local action=${1}
- shift
-
- case "${action}" in
- # Add a new route.
- add)
- route_add $@
- ;;
- # Remove an existing route.
- remove)
- route_remove $@
- ;;
- # List all routes.
- list)
- route_list $@
- return ${EXIT_OK}
- ;;
- *)
- error "Unrecognized action: ${action}"
- cli_run_help network route
-
- exit ${EXIT_ERROR}
- ;;
- esac
-
- # Applying all routes.
- route_apply
-
- exit ${EXIT_OK}
-}
-
cli_dhcpd() {
local proto=${1}
shift
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-dhcp
exit ${EXIT_OK}
fi
case "${action}" in
edit)
- dhcpd_edit ${proto} $@
+ dhcpd_edit ${proto} "$@"
;;
start)
dhcpd_start ${proto}
+
+ # Make this permanent
+ dhcpd_enable ${proto}
;;
stop)
dhcpd_stop ${proto}
+
+ # Make this permanent
+ dhcpd_disable ${proto}
;;
restart|reload)
dhcpd_reload ${proto}
;;
subnet)
- cli_dhcpd_subnet ${proto} $@
+ cli_dhcpd_subnet ${proto} "$@"
;;
show|"")
- cli_dhcpd_show ${proto} $@
+ cli_dhcpd_show ${proto} "$@"
;;
*)
error "Unrecognized action: ${action}"
ipv6)
cli_headline 2 "Lease times"
if isinteger VALID_LIFETIME; then
- cli_print_fmt1 2 "Valid lifetime" "${VALID_LIFETIME}s"
+ cli_print_fmt1 2 "Valid lifetime" "$(format_time ${VALID_LIFETIME})"
fi
if isinteger PREFERRED_LIFETIME; then
- cli_print_fmt1 2 "Preferred lifetime" "${PREFERRED_LIFETIME}s"
+ cli_print_fmt1 2 "Preferred lifetime" "$(format_time ${PREFERRED_LIFETIME})"
fi
cli_space
cli_space
cli_headline 2 "Lease times"
- cli_print_fmt1 2 "Default lease time" "${DEFAULT_LEASE_TIME}s"
- cli_print_fmt1 2 "Max. lease time" "${MAX_LEASE_TIME}s"
+ cli_print_fmt1 2 "Default lease time" "$(format_time ${DEFAULT_LEASE_TIME})"
+ cli_print_fmt1 2 "Max. lease time" "$(format_time ${MAX_LEASE_TIME})"
if isset MIN_LEASE_TIME; then
- cli_print_fmt1 2 "Min. lease time" "${MIN_LEASE_TIME}s"
+ cli_print_fmt1 2 "Min. lease time" "$(format_time ${MIN_LEASE_TIME})"
fi
cli_space
# Read the options.
local -A options
- dhcpd_global_options_read ${proto} ${subnet_id}
+ dhcpd_global_options_read ${proto}
# Print the options if any.
if [ ${#options[*]} -gt 0 ]; then
local subnets=$(dhcpd_subnet_list ${proto})
if [ -n "${subnets}" ]; then
cli_headline 2 "Subnets"
- local subnet_id
- for subnet_id in ${subnets}; do
- cli_dhcpd_subnet_show ${proto} ${subnet_id} 2
+ local subnet
+ for subnet in ${subnets}; do
+ cli_dhcpd_subnet_show ${proto} ${subnet} 2
done
fi
}
cli_dhcpd_subnet() {
+ assert [ $# -ge 1 ]
+
local proto=${1}
shift
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-dhcp-subnet
exit ${EXIT_OK}
fi
case "${action}" in
new)
- dhcpd_subnet_new ${proto} $@
+ dhcpd_subnet_new ${proto} "$@"
;;
remove)
- dhcpd_subnet_remove ${proto} $@
+ dhcpd_subnet_remove ${proto} "$@"
;;
- [0-9]*)
- local subnet_id=${action}
+ *:*/*|*.*.*.*/*)
+ local subnet=${action}
- if ! dhcpd_subnet_exists ${proto} ${subnet_id}; then
- error "The given subnet with ID ${subnet_id} does not exist."
+ if ! dhcpd_subnet_exists ${proto} ${subnet}; then
+ error "Subnet ${subnet} does not exist"
return ${EXIT_ERROR}
fi
case "${action}" in
edit)
- dhcpd_subnet_edit ${proto} ${subnet_id} $@
+ dhcpd_subnet_edit ${proto} ${subnet} "$@"
local ret=$?
if [ ${ret} -eq ${EXIT_OK} ]; then
exit ${ret}
;;
range)
- cli_dhcpd_subnet_range ${proto} ${subnet_id} $@
+ cli_dhcpd_subnet_range ${proto} ${subnet} "$@"
exit $?
;;
show)
- cli_dhcpd_subnet_show ${proto} ${subnet_id} $@
+ cli_dhcpd_subnet_show ${proto} ${subnet} "$@"
exit $?
;;
options)
- cli_dhcpd_subnet_options ${proto} ${subnet_id} $@
+ cli_dhcpd_subnet_options ${proto} ${subnet} "$@"
exit $?
;;
*)
esac
;;
show)
- local subnet_id
- for subnet_id in $(dhcpd_subnet_list ${proto}); do
- cli_dhcpd_subnet_show ${proto} ${subnet_id}
+ local subnet
+ for subnet in $(dhcpd_subnet_list ${proto}); do
+ cli_dhcpd_subnet_show ${proto} ${subnet}
done
;;
*)
}
cli_dhcpd_subnet_range() {
- local proto=${1}
- assert isset proto
- shift
+ assert [ $# -ge 2 ]
- local subnet_id=${1}
- assert isset subnet_id
- shift
-
- local action=${1}
- shift
+ local proto=${1}
+ local subnet=${2}
+ local action=${3}
+ shift 3
case "${action}" in
new)
- dhcpd_subnet_range_new ${proto} ${subnet_id} $@
- exit $?
+ dhcpd_subnet_range_new ${proto} ${subnet} "$@" || exit ${EXIT_ERROR}
;;
remove)
- dhcpd_subnet_range_remove ${proto} ${subnet_id} $@
- exit $?
+ dhcpd_subnet_range_remove ${proto} ${subnet} "$@" || exit ${EXIT_ERROR}
;;
*)
error "Unrecognized action: ${action}"
exit ${EXIT_ERROR}
;;
esac
+
+ dhcpd_reload ${proto}
+ return ${EXIT_OK}
}
cli_dhcpd_subnet_show() {
- local proto=${1}
- assert isset proto
+ assert [ $# -ge 2 -a $# -le 3 ]
- local subnet_id=${2}
- assert isset subnet_id
+ local proto=${1}
+ local subnet=${2}
local level=${3}
isset level || level=0
local $(dhcpd_subnet_settings ${proto})
# Read in configuration settings.
- dhcpd_subnet_read ${proto} ${subnet_id}
+ dhcpd_subnet_read ${proto} ${subnet}
- cli_headline $(( ${level} + 1 )) \
- "DHCP${proto/ip/} subnet declaration #${subnet_id}"
+ cli_headline $(( ${level} + 1 )) "DHCP Subnet Declaration"
cli_print_fmt1 $(( ${level} + 1 )) \
"Subnet" "${ADDRESS}/${PREFIX}"
cli_space
# Read the options.
local -A options
- dhcpd_subnet_options_read "${proto}" "${subnet_id}"
+ dhcpd_subnet_options_read "${proto}" "${subnet}"
# Print the options if any.
if [ ${#options[*]} -gt 0 ]; then
# Ranges.
cli_headline $(( ${level} + 2 )) "Ranges"
- local ranges=$(dhcpd_subnet_range_list ${proto} ${subnet_id})
+ local ranges=$(dhcpd_subnet_range_list ${proto} ${subnet})
if isset ranges; then
- local range_id $(dhcpd_subnet_range_settings ${proto})
- for range_id in ${ranges}; do
- dhcpd_subnet_range_read ${proto} ${subnet_id} ${range_id}
+ local range $(dhcpd_subnet_range_settings ${proto})
+ for range in ${ranges}; do
+ dhcpd_subnet_range_read ${proto} ${subnet} ${range}
- cli_print $(( ${level} + 2 )) \
- "#%d: %s - %s" ${range_id} ${START} ${END}
+ cli_print $(( ${level} + 2 )) "%s - %s" ${START} ${END}
done
else
cli_print $(( ${level} + 2 )) "No ranges have been defined."
}
cli_dhcpd_subnet_options() {
- local proto=${1}
- assert isset proto
- shift
+ assert [ $# -ge 2 ]
- local subnet_id=${1}
- assert isset subnet_id
- shift
+ local proto=${1}
+ local subnet=${2}
local key val
while [ $# -gt 0 ]; do
case "${1}" in
*=*)
key=$(cli_get_key ${1})
- val=$(cli_get_val ${1})
+ val=$(cli_get_val "${1}")
- dhcpd_subnet_option_set ${proto} ${subnet_id} ${key} ${val}
+ dhcpd_subnet_option_set ${proto} ${subnet} ${key} ${val}
esac
+ shift
done
}
cli_start() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network
exit ${EXIT_OK}
fi
- local zones=$(zones_get $@)
+ local zones=$(zones_get "$@")
local zone
for zone in ${zones}; do
}
cli_stop() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network
exit ${EXIT_OK}
fi
- local zones=$(zones_get $@)
+ local zones=$(zones_get "$@")
local zone
for zone in ${zones}; do
}
cli_restart() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network
exit ${EXIT_OK}
fi
- cli_stop $@
+ cli_stop "$@"
# Give the system some time to calm down
sleep ${TIMEOUT_RESTART}
- cli_start $@
+ cli_start "$@"
}
cli_status() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network
exit ${EXIT_OK}
fi
local log_disable_stdout=${LOG_DISABLE_STDOUT}
LOG_DISABLE_STDOUT="true"
- local zones=$(zones_get $@)
+ local arguments=( $@ )
- local zone
- for zone in ${zones}; do
- zone_status ${zone}
+ # Show all zones when no arguments are given
+ if ! isset arguments; then
+ local zone
+ for zone in $(zones_get_all); do
+ zone_status "${zone}"
+ done
+
+ return ${EXIT_OK}
+ fi
+
+ local arg
+ for arg in ${arguments[@]}; do
+ # Is this a zone?
+ if zone_exists "${arg}"; then
+ zone_status "${arg}"
+
+ # Is this a port?
+ elif port_exists "${arg}"; then
+ port_status "${arg}"
+
+ # Is this a PHY?
+ elif phy_exists "${arg}"; then
+ cli_device_status "${arg}"
+
+ # Is this a device?
+ elif device_exists "${arg}"; then
+ cli_device_status "${arg}"
+
+ # Unknown argument
+ else
+ error "Unknown argument: ${arg}"
+ fi
done
# Reset logging.
}
cli_reset() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network
exit ${EXIT_OK}
fi
warning_log "Will reset the whole network configuration!!!"
-
# Force mode is disabled by default
local force=0
fi
fi
+ # Destroy all IPsec VPN connections
+ local connection
+ for connection in $(ipsec_list_connections); do
+ ipsec_connection_destroy "${connection}"
+ done
+
+ local pool
+ for pool in $(ipsec_list_pools); do
+ ipsec_pool_destroy "${pool}"
+ done
+
+ # Stop strongswan
+ ipsec_strongswan_autostart
+
+ # Destroy all user-defined security policies
+ local secpol
+ for secpol in $(vpn_security_policies_list_user); do
+ vpn_security_policies_destroy "${secpol}"
+ done
+
local zone
- for zone in $(zones_get --all); do
- zone_destroy_now "${zone}"
+ for zone in $(zones_get_all); do
+ zone_destroy "${zone}"
done
local port
- for port in $(ports_get --all); do
+ for port in $(ports_get_all); do
port_destroy "${port}"
done
# Flush all DNS servers.
dns_server_flush
- # Re-run the initialization functions
- init_run
+ # Trigger udev to re-add all physical network devices
+ cmd_quiet udevadm trigger --action=add --subsystem-match=net
exit ${EXIT_OK}
}
# Optionally, there are two arguments taken, the type of hook
# and which hook should be shown.
cli_help() {
- local type=${1}
- local what=${2}
+ local cmd=${1}
+ shift
- # Remove unknown types.
- if ! listmatch ${type} zone port config; then
- type=""
- fi
+ case "${cmd}" in
+ zone|port|config)
+ local type=${cmd}
+ local hook=${1}
+
+ # List all hooks if requested
+ if [ "${hook}" = "list-hooks" ]; then
+ cli_list_hooks ${type}
+ return ${EXIT_OK}
+ fi
- # If no arguments were given, we will show the default page.
- if [ -z "${type}" ]; then
- cli_show_man network
- return ${EXIT_OK}
- fi
+ if ! hook_exists ${type} ${hook}; then
+ error "No hook with name '${hook}' could be found"
+ exit "${EXIT_ERROR}"
+ fi
- if ! hook_exists ${type} ${what}; then
- error "Hook of type '${type}' and name '${what}' could not be found."
- exit "${EXIT_ERROR}"
- fi
+ hook_exec ${type} ${hook} help
+ ;;
+
+ # In all other cases show the default man page
+ *)
+ cli_show_man network
+ return ${EXIT_OK}
+ ;;
+ esac
- hook_exec ${type} ${what} help
+ return ${EXIT_ERROR}
}
cli_dns_server() {
- if cli_help_requested $@; then
+ if cli_help_requested "$@"; then
cli_show_man network-dns-server
exit ${EXIT_OK}
fi
db-dump)
db_dump
;;
+ device-get-by-mac-address)
+ device_get_by_mac_address "$@"
+ ;;
+ ipsec-connection-exists)
+ ipsec_connection_exists "$@"
+ ;;
list-devices)
device_list
;;
list-dhcpd-ranges-of-subnet)
- dhcpd_subnet_range_list $@
+ dhcpd_subnet_range_list "$@"
;;
list-dhcpd-settings)
- dhcpd_global_settings_list $@
+ dhcpd_global_settings_list "$@"
;;
list-dhcpd-subnets)
- dhcpd_subnet_list $@
+ dhcpd_subnet_list "$@"
;;
list-dhcpd-subnet-options)
- dhcpd_subnet_options_list $@
+ dhcpd_subnet_options_list "$@"
;;
list-dns-servers)
dns_server_list
port_list_free
;;
list-hooks)
- hook_list $@
+ hook_list "$@"
+ ;;
+ list-ipsec-connections)
+ ipsec_list_connections
;;
list-ports)
port_list
;;
list-ports-of-zone)
- zone_get_ports $@
+ zone_get_ports "$@"
+ ;;
+ list-vpn-security-policies-all)
+ vpn_security_policies_list_all
;;
list-settings)
network_settings_list
list-zones)
zones_get_all
;;
+ list-next-free-zones)
+ zones_get_next_free
+ ;;
+ list-zone-config-ids)
+ zone_config_list_ids "$@"
+ ;;
+ list-zone-config-hids)
+ zone_config_list_hids "$@"
+ ;;
+ vpn-security-policy-exists)
+ vpn_security_policy_exists "$@"
+ ;;
+ zone-name-is-valid)
+ zone_name_is_valid "$@"
+ ;;
+ zone-config-id-is-valid)
+ zone_config_id_is_valid "$@"
+ ;;
+ zone-config-hid-is-valid)
+ zone_config_hid_is_valid "$@"
+ ;;
*)
error "No such command: ${cmd}"
exit ${EXIT_ERROR}
# Process the given action
case "${action}" in
init)
- init_run
+ # Update resolv.conf(5) when initializing the network
+ dns_generate_resolvconf
+
+ # Update bird configuration
+ bird_generate_config
+
+ # Also execute all triggers
+ triggers_execute_all "init"
;;
- settings|hostname|port|device|zone|start|stop|restart|status|reset|route)
- cli_${action} $@
+ settings|hostname|port|device|zone|start|stop|restart|status|reset|route|vpn|wireless)
+ cli_${action} "$@"
;;
# DHCP server configuration (automatically detects which protocol to use).
dhcpv6|dhcpv4)
- cli_dhcpd ${action/dhcp/ip} $@
+ cli_dhcpd ${action/dhcp/ip} "$@"
;;
# DNS server configuration.
dns-server)
- cli_dns_server $@
+ cli_dns_server "$@"
;;
""|help|--help|-h)
- cli_help $@
+ cli_help "$@"
;;
raw)
- cli_raw $@
+ cli_raw "$@"
;;
*)
projects / people / ms / network.git / blobdiff