Add default settings file for nitsi tests

This makes writing a test much faster.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

Add a test to check that we can attach ports to a zone of type bridge

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

Add new test zone-new-bridge

This test checks if we can create a new zone of type bridge.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

Add test for command raw device-get-by-mac-address

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add new function device_get_by_mac_address()

We need this function and the command to identify ports in a nitsi test.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add recipe to set network settings

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add recipe to reset network configuration

We use --force here to avoid the y/n question.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add include dir for nitsi test

When we include recipes in our recipe we must be shure in some cases
that the recipe are generated out of a .in file.

All files in the include dir will be generated before every test so we
can be shure that these files are present.

This is useful for recipes like the make-install recipe in this test,
which needs to be generated and will be included in nearly every test.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Fix network reset

The functions zone_destroy and zone_destroy_now where merged to
zone_destroy in an earlier commit. So we have to use zone_destroy here.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

We need to change the path of the image in the settings file to

When we do not change this path accordingly to the place where we store
our images the copy in feature does not work.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Adapt settings file of nitsi tests to new syntax

Nitsi is using a new syntax for settings file so we need to change the
settings files of our tests.

I dropped some settings in the hello-world test because we do not need
them for this test.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Adapt nitsi command line to new syntax

Nitsi is now using subparsers so we have to add 'run-test' to the
command line.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Drop README file from virtual environment

Those instructions are no longer valid

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

NITSI: Automatically download required images

This patch lets make automatically download all required
images and extracts them.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

Makefile: Ship virtual environment files in release tarball

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

nitsi: Add a test that calls "make check" in the virtual environment

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

Makefile: Remove any excess substitution rules

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

Build source tarball before running any NITSI tests

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>

nitsi: Create "nitsi" Makefile target

Calling "make nitsi" will run all nitsi tests

Reviewed-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Fix test hello-world

In the moment a single all statement is not supported by nitsi.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Fix path to virtual environment of hello-world test

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add first test for nitsi

This commit introduce NITSI. Nitsi is the "Networking integration test
suite for IPFire". We can test the network code in a virtual environment
on any system.

This test has the only purpose to check if nitsi is working.

For more information about nitsi see the manpages and the git
repository on git.ipfire.org

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add simple Readme for the basic virtual-environment

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add first basic virtual environment for nitsi

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

IPsec: regenerate a swanctl config on connection startup if no config is found

This is an easy way to forcing a regenration if we do not want to change any setting.

Fixes: #11627
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ip-tunnel: choose the correct type based on the ip protocol

IPv4 and IPv6 need different types for iproute2.
So in the _add function we have to determine the mode
based on the IP protocol of the ${remote_address}.

When we change ikey and okey we have to dertermine the mode the device
have currently.

Fixes: #11431
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ip-tunnel: Improve checks

We cannot mix ipv6 and ipv4 and we also need to detect the IP protocol
version to decide which mode we have to use.
This is done in a seperated commit.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

device: add new function device_tunnel_get_type()

If we already know that the device must be a ip-tunnel device
we can save time when we check just for the types
a ip-tunnel device can have.

To avoid code duplication we call this function from device_get_type()

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

device: add new function device_is_vti6

This functions checks if a device is a vti6 device.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ip-tunnel: add new function

To be undependent from the IP protocol we use, when we use tunnel modes
in our code, this function converts the modes
to the modes the iproute2 tool uses
which often depend on the IP protocol version.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

IPsec: Fix routing in tunnel mode

Two syntax errors make the routing in tunnel mode non working

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

firewall: Disable PMTU by default

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

firewall: Enable ECN by default

Apple has tried this and it seems to be safe now

https://www.ietf.org/proceedings/98/slides/slides-98-maprg-tcp-ecn-experience-with-enabling-ecn-on-the-internet-padma-bhooma-00.pdf

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

firewall: Enable ECN fallback mechanism when ECN is enabled

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

IPsec: Fix routing

Based on the examples found in strongswan
we need to specific the source IP for our routes through an IPsec VPN.
If we have no source IP (a router can route packages
which do not belong to the network assigned to our zones) we set no routes,
but clients can still use the tunnel.

For IPsec VPNs in tunnel mode we
also need the device which has the ${PLUTO_ME} IP address asigned.

The source IP  is determined ip_get_assigned_addresses_from_net()
the device is determined by the  device_get_by_ip_address() function.

For tunnel mode see:
https://www.strongswan.org/testing/testresults/ipv6-stroke/net2net-ip4-in-ip6-ikev2/moon.ip.route

Fixes: #11629
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

IPsec: Log the content of all PLUTO variables in debug mode

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add new function ip_get__assigned_addresses_from_net()

This function is neede by IPsec to set the routes correctly.
We can now now find a source IP for a given net.
This way is ugly because the source IP
is unpredictable if we get multiple IPs.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add new function: device_get_by_assigned_ip_address()

This function is used to get a device from an IP address
which is assigned to the device.
This function needs to be introduced
to set the routes for IPsec correctly.

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Fix zone_config_check_same_setting

Every time we edited a config zone_config_check_same_setting
returns that a identical config was found but this config was the config
we want to edit. So we now generate the id inside hook_new and pass the
id always to hook_parse_cmdline and to zone_config_check_same_setting.

So we can skip this config.

Fixes: #11451
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Fix radvd startup

We now only start radvd when we write a config for a zone into the config
file.

Fixes: #11450
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Replace ipv[64]-static by one static hook

There is no need to split this into multiple hooks
since they share a lot of common configuration, etc.

There is no migration path provided here.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ipv6-static: Remove shell switches to define address and prefix

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Makefile: All shell library files where executable which they shouldn't be

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

functions: Include path to new utils

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

network-phy-list-ht-caps: Don't print empty lines

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Don't fail when wireless devices are not supported by nl80211

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Properly handle errors from netlink messages

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

network-phy-list-ht-caps: Fix SEGV when no PHY was found

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Add command that returns supported HT caps for wireless PHYs

Fixes #11611

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Add objects for 802.11 PHYs

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Initialise netlink connection when initialising context

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Depend on libnl >= 3.0

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Get index for interfaces

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Add network_log function to header

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Actually free context

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Add interface objects

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Add logging infrastructure

Fixes #11610

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libnetwork: Add central context object

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ip-tunnel: Make delete function an alias for device_delete

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Shut down devices before we remove them

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

dhclient-script: fix bound

When we get a BOUND we should have only new_* variables set.
So it is stated in the manpage.
Apparently, also old_* variables are set so we never got into the block where the IP address was set.
We now always set a new IP Address when we get a BOUND.

Fixes: #11363
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Jonatan Schlag &lt;<a href="mailto:jonatan.schlag@ipfire.org">jonatan.schlag@ipfire.org</a>&gt;
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless-networks: validate priority

Fixes: #11469
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless-networks: change encryption-mode to modes

We also use now our great +/- syntax.

Fixes: #11471
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ipsec: Properly validate FQDNs

Fixes #11441

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Make testuite run properly to make make distcheck happy

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Create configuration directories on install

Fixes #11455

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Drop placeholder for WEP key validation

We don't support WEP any more.

Fixes #11468

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

man: Update wireless zone documentation according to latest changes

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Add new libnetwork

This is going to be a central place to all things that needed
to be implemented in C here.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

man: Add documentation for VPN security policies

Fixes #11426

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Actively scan for hidden networks

Fixes #11476

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Allow using a client certificate to authenticate

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Set default MODES

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Set default priority to 0

This is wpa_supplicant's default, too and the user can
then set any priority higher and order the networks according
to own preferences.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless: Use random MAC addresses when scanning for better privacy

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Allow using WPA-EAP

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Allow using a custom CA per network

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Verify server certificates against CAs

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Write user credentials into configuration

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Rename ENCRYPTION_MODES to MODES

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wpa_supplicant: Drop complicated config generation function

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

802.11s: Generate config in extra function

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

Forgot to move one line

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wpa_supplicant: Move config header generation into own function

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless: Add support for 802.1X authentication

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless: Fix crash of status if not connected

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wpa_supplicant: Doesn't like spaces here

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wpa_supplicant: Add ctrl_interface

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

interrupts: Fix passing of command line args with $@

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

interrupts: Fix directory listing

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless: Drop old network configuration from hook and use new one

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Add priority to WPA supplicant configuration

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Allow using multiple modes at the same time

To be more compatible with networks where encryption methods
are unknown, we allow using multiple (or all) methods that
we support at the same time.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless: Drop support for WEP

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Add configured EAP modes

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Convert to use handles internally

SSIDs are hard to handle since we have no efficient way to
list them all.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Allow exporting configuration into WPA supplicant format

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Validate any PSKs for WPA*

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Only delete one network at a time

Destroying multiple networks in one go is not really a good
idea here, since error codes are not properly passed on.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

wireless networks: Properly validate encryption modes

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>