]>
git.ipfire.org Git - people/ms/network.git/log
Michael Tremer [Wed, 14 Sep 2016 08:35:42 +0000 (10:35 +0200)]
DHCP: Format lease time in human-readable format
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 17:23:33 +0000 (19:23 +0200)]
DHCP: Cleanup some code
Remove any references to the old subnet ID system
and improve argument handling
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 17:14:26 +0000 (19:14 +0200)]
DHCP: Reload after subnet range changes
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 17:09:34 +0000 (19:09 +0200)]
DHCP: Do not accept overlapping subnet ranges
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:44:30 +0000 (18:44 +0200)]
DHCP: dhcpd_subnet_range_new: Make ${range} available throughout function
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:42:41 +0000 (18:42 +0200)]
DHCP: Check if subnet range already exists before creating
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:40:23 +0000 (18:40 +0200)]
DHCP: Check if range is not negative
If a new range is created, we now check if range is positive
(even for IPv6).
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:39:52 +0000 (18:39 +0200)]
IPv4: Fix comparing IP addresses
This function relied on an older function that was removed
some time ago.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:39:15 +0000 (18:39 +0200)]
netcalc: Fix comparing IP addresses
Those are stored in big endian
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:24:50 +0000 (18:24 +0200)]
DHCP: Show message when subnet range has been created
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:23:34 +0000 (18:23 +0200)]
DHCP: Make removing subnet ranges more robust
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 16:02:14 +0000 (18:02 +0200)]
DHCP: Get rid of range IDs
Same as subnet ids. These are more confusing and unhelpful
than handling the entire range in the native IP format.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 12:49:09 +0000 (14:49 +0200)]
Make fonts properly bold without changing the colour of the normal font
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2016 12:40:59 +0000 (14:40 +0200)]
DHCP: Get rid of subnet IDs
It is easier to use the subnet to identify a subnet instead
of an ID. Auto-completion on the shell will help to avoid
much typing and make commands more readable.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 5 Sep 2016 12:25:41 +0000 (14:25 +0200)]
wireless: Validate regulatory domain before setting and saving
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Michael Tremer [Mon, 5 Sep 2016 11:55:21 +0000 (13:55 +0200)]
settings: Update DNS configuration only after DNS settings changed
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 5 Sep 2016 11:52:05 +0000 (13:52 +0200)]
settings: Immediately apply wireless reg domain
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 2 Sep 2016 12:57:17 +0000 (14:57 +0200)]
inetcalc: Fix comparing IPv6 addresses
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 2 Sep 2016 12:17:07 +0000 (14:17 +0200)]
Revert "Log better errors when locks could not be acquired"
This reverts commit
20c4b654ba9a5027f59d7063b5a364ff0f370bd1 .
Michael Tremer [Fri, 2 Sep 2016 11:52:25 +0000 (13:52 +0200)]
Log better errors when locks could not be acquired
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 2 Sep 2016 11:16:26 +0000 (13:16 +0200)]
Make headlines readable on black background
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 22 Aug 2016 02:07:24 +0000 (22:07 -0400)]
Bump version to 008
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 22 Apr 2016 21:51:22 +0000 (21:51 +0000)]
route: Fail cleanly if the protocol cannot be detected
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 23:12:49 +0000 (23:12 +0000)]
docs: Update for recent MTU defaults changes
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 23:11:34 +0000 (23:11 +0000)]
modem: Deduplicate some code to show status of a serial modem
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 19:39:08 +0000 (19:39 +0000)]
modem: Correctly calculate signal strength
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:51:23 +0000 (18:51 +0000)]
wireless: Remove MTU setting
This is unused.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:49:47 +0000 (18:49 +0000)]
Remove default MTU for PPP client connections
The providers set this on their side and we should not use
any defaults because selecting those is just unfounded and
arbitrary.
Fixes #11071
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:47:13 +0000 (18:47 +0000)]
modem: Fix coding style
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:46:42 +0000 (18:46 +0000)]
modem: Show mobile network status even when not connected
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:45:48 +0000 (18:45 +0000)]
modem: Fix broken AUTH check for default values
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:44:28 +0000 (18:44 +0000)]
modem: Speed-up chatting to modem
It is not checked any more if the SIM card is unlocked.
That needs to be done on a higher level now and will allow
us to execute the other commands quicker.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 18:43:47 +0000 (18:43 +0000)]
modem: Show network registration status
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 13:31:14 +0000 (13:31 +0000)]
modem: Support LTE as connection type
This will now correctly show LTE connections that
were previously "unknown".
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Michael Tremer [Sat, 26 Mar 2016 13:29:39 +0000 (13:29 +0000)]
modem: Remove support for login scripts
It seems that no provider requires these any more and
that they cause problems with providers that use username
and password for authentication.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Michael Tremer [Wed, 16 Mar 2016 23:01:16 +0000 (23:01 +0000)]
docs: Add man page for wireless zone hook
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 16 Mar 2016 22:50:25 +0000 (22:50 +0000)]
docs: Add man page for modem zone hook
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 16 Mar 2016 22:25:21 +0000 (22:25 +0000)]
docs: Add network-port man page
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 17 Jan 2016 18:37:10 +0000 (19:37 +0100)]
lock: Decrease the number of iterations per second
There have been reports about that this locking mechanism
wasn't too stable on their machines which can totally be
the case judging by the design of it.
However there is no other easy way to implement this any
better without any native C helper which I would like to
avoid at this moment.
So I decreased the amount of ticks which should make
any processes running at the same time less likely to
collide.
Fixes #10979
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 16 Jan 2016 16:09:47 +0000 (17:09 +0100)]
Implement identify feature
When executing "network [zone|port|device] XXX identify" the
port, device or all ports of the zone (that support this feature)
will flash for ten seconds.
Ports will also flash when they are attached to or detached from
a zone.
This is supposed to make plugging in a cable into the right
device is easier.
Fixes #10969
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 1 Nov 2015 00:12:51 +0000 (01:12 +0100)]
man: Add a quick start guide
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 31 Oct 2015 22:50:52 +0000 (23:50 +0100)]
man: Document the DNS_SEARCH_DOMAINS setting
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 31 Oct 2015 22:47:29 +0000 (23:47 +0100)]
man: Document WIRELESS_REGULATORY_DOMAIN setting
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 31 Oct 2015 22:28:32 +0000 (23:28 +0100)]
man: settings: Remove old COLORS setting
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 31 Oct 2015 22:16:14 +0000 (23:16 +0100)]
man: Add link to man page of the "route" command
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 21 Oct 2015 16:42:06 +0000 (18:42 +0200)]
inetcalc: Allow build on 64 bit architectures
inetcalc previously used a GCC extension that was only
available on 64 bit platforms. This patch changes the
code to use struct in6_addr instead of __uint128_t for
storing IP addresses.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 20 Oct 2015 15:39:26 +0000 (17:39 +0200)]
Merge branch 'master' of ssh://git.ipfire.org/pub/git/network
Michael Tremer [Sun, 18 Oct 2015 22:10:25 +0000 (23:10 +0100)]
Bump version to 007
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 18 Oct 2015 17:36:57 +0000 (19:36 +0200)]
functions.ipv6: Fix doubble square bracket when calling assert
The assert check does not proper work when using doubble square backets,
so the check fails for some unknown reasons. Removing one bracket will allow
to successfully perform the assert check again.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 17 Oct 2015 14:51:26 +0000 (16:51 +0200)]
Add functionality to identify tun/tap devices
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 17 Oct 2015 14:03:35 +0000 (16:03 +0200)]
radvd: Fix missing function radvd_clear
This function used to clear the configuration file
but was for some reason missing. The new function
has a slightly more descriptive name.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 17 Oct 2015 13:52:57 +0000 (15:52 +0200)]
dhclient-script: Fix wrong funtion call to determine prefix
A wrong function was called to determine the prefix from
the subnet mask.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 18 Sep 2015 20:37:05 +0000 (22:37 +0200)]
Replace ipcalc by inetcalc
This is our own implementation of a binary tool that is used
to validate and calculate with IP addresses.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Stefan Schantl <stefan.schantl@ipfire.org>
Stefan Schantl [Tue, 15 Sep 2015 15:52:36 +0000 (17:52 +0200)]
Make configure check for a C compiler
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 17:08:45 +0000 (19:08 +0200)]
wireless: Fix wrong variable name
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 16:37:43 +0000 (18:37 +0200)]
Ensure that radvd is started when needed
As this is a router we will need to make sure that the router
advertisement daemon is running at all times for local zones.
This patch will start radvd automatically when ever needed.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 16:33:18 +0000 (18:33 +0200)]
Allow renaming zones
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 15:05:53 +0000 (17:05 +0200)]
zone: Automatically bring up all configs after creation
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 15:05:23 +0000 (17:05 +0200)]
ipv6-auto: Fix wrong hook function name
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 14:45:21 +0000 (16:45 +0200)]
ipv4-dhcp: Show DNS servers
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sun, 6 Sep 2015 14:34:44 +0000 (14:34 +0000)]
pppoe-server: Allow passing DNS servers to the client
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sat, 5 Sep 2015 19:45:30 +0000 (21:45 +0200)]
Merge branch 'master' of git://git.ipfire.org/network
Stefan Schantl [Sat, 5 Sep 2015 19:44:07 +0000 (21:44 +0200)]
dns: Better propagate known DNS servers
dns_servers_update() is a new function that must be called
when ever there are changes to the DNS server configuration.
This may be by the user or by learning new DNS servers from
a dial-up connection, etc.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sat, 5 Sep 2015 19:21:14 +0000 (21:21 +0200)]
pppoe: The remote MAC address should be protocol-independent
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sat, 5 Sep 2015 19:16:03 +0000 (21:16 +0200)]
pppoe: Fix wrong variable name for DNS servers
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sat, 5 Sep 2015 18:29:46 +0000 (18:29 +0000)]
pppoe-server: Enable IPv6
Clients which support IPv6 will now be allocated a link-local
IPv6 address.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Mon, 8 Jul 2013 03:10:18 +0000 (05:10 +0200)]
Local zones must be named net0, net1, ...
"net" is more generic and makes more sense when being
used with VPNs and other virtual networks which are
not a LOCAL area network ("lan").
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sat, 5 Sep 2015 14:52:31 +0000 (16:52 +0200)]
Merge remote-tracking branch 'prime/master'
Stefan Schantl [Sat, 5 Sep 2015 14:46:53 +0000 (16:46 +0200)]
Merge remote-tracking branch 'ipv6/master'
Stefan Schantl [Sun, 30 Aug 2015 20:35:21 +0000 (20:35 +0000)]
pppoe-server: Load pppoe kernel module
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Stefan Schantl [Wed, 26 Aug 2015 21:00:37 +0000 (21:00 +0000)]
aiccu: Add helper script that adds routing information to the database
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Wed, 26 Aug 2015 17:48:58 +0000 (17:48 +0000)]
Makefile: Append to INSTALL_DIRS to silence automake warning
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Wed, 26 Aug 2015 21:00:37 +0000 (21:00 +0000)]
aiccu: Add helper script that adds routing information to the database
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Stefan Schantl [Wed, 26 Aug 2015 17:48:58 +0000 (17:48 +0000)]
Makefile: Append to INSTALL_DIRS to silence automake warning
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Michael Tremer [Wed, 26 Aug 2015 12:31:29 +0000 (14:31 +0200)]
Update all config hooks according to the new naming convention
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 26 Aug 2015 12:30:33 +0000 (14:30 +0200)]
config hooks: Rename hook functions to align with ports
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 18 Aug 2015 19:24:58 +0000 (21:24 +0200)]
Remove some unused code
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 13 Aug 2015 18:32:29 +0000 (20:32 +0200)]
mac_generate: Refactor to make this function faster
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 13 Aug 2015 18:03:15 +0000 (20:03 +0200)]
bridge: Remove unnecessary call of mac_generate
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 13 Aug 2015 09:02:58 +0000 (11:02 +0200)]
Introduce triggers
When the state of the network changes (i.e. a zone comes up, etc.)
a set of triggers will be called so that external applications can
adopt to these changes.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 11 Aug 2015 22:35:28 +0000 (00:35 +0200)]
dns: Add local domain name to DNS domain search list
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 11 Aug 2015 22:28:20 +0000 (00:28 +0200)]
Show help for zone creation
If a too small number of arguments is passed, we will
show a help page to create a new zone.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 2 May 2015 21:49:49 +0000 (21:49 +0000)]
radvd: Always advertise all prefixes
Michael Tremer [Sat, 2 May 2015 21:31:30 +0000 (21:31 +0000)]
Merge branch 'master' of ssh://git.ipfire.org/pub/git/network
Conflicts:
src/functions/functions.dhcpd
src/functions/functions.ipv6
Michael Tremer [Sat, 2 May 2015 21:28:20 +0000 (21:28 +0000)]
DHCP: Implement prefix delegation for the DHCP server
Michael Tremer [Sat, 2 May 2015 21:26:00 +0000 (21:26 +0000)]
dhclient: Properly handle IPv6
Router advertisements are now properly processed if there
is dhclient running on an interface and all information
from the DHCP client is removed when dhclient is stopped.
Michael Tremer [Sat, 2 May 2015 20:25:51 +0000 (20:25 +0000)]
routing: Remove deprecated functions
Michael Tremer [Sat, 2 May 2015 20:22:22 +0000 (20:22 +0000)]
dhclient: Fix overwriting functions.zone
Michael Tremer [Sat, 2 May 2015 20:06:03 +0000 (20:06 +0000)]
Replace routing_db_* by db_*
db_* is an extremely simple and volatile key-value
database that can be used to store things at runtime.
Michael Tremer [Sat, 2 May 2015 16:06:07 +0000 (16:06 +0000)]
Remove the function keyword which is a bashism
Michael Tremer [Sat, 2 May 2015 15:26:31 +0000 (15:26 +0000)]
dhcp: Add support for DHCPv6 over Ethernet
Michael Tremer [Fri, 17 Apr 2015 10:07:26 +0000 (10:07 +0000)]
Disable async logging
This causes even more unreadable output in the journal.
Michael Tremer [Tue, 14 Apr 2015 12:55:39 +0000 (12:55 +0000)]
ipv6: Add auto-configuration hook for zones
This may be mostly unusable for a firewall but we will have
it just because. Can be used for hosts that do not route
anything.
Michael Tremer [Tue, 14 Apr 2015 12:32:33 +0000 (12:32 +0000)]
zone: Make zone_config_{read,write} behave the same as zone_port_{read,write} do
Michael Tremer [Tue, 14 Apr 2015 12:31:50 +0000 (12:31 +0000)]
ipv6: When auto-configuration is enabled, forwarding must be disabled
Michael Tremer [Sun, 12 Apr 2015 18:23:26 +0000 (18:23 +0000)]
wireless-adhoc: Fix wrong function name
Michael Tremer [Sun, 12 Apr 2015 18:22:46 +0000 (18:22 +0000)]
zone: Fix immediate attachment of ethernet ports to a bridge
Michael Tremer [Sat, 31 Jan 2015 13:27:23 +0000 (13:27 +0000)]
dhclient: Add support for DHCPv6 and PD
Michael Tremer [Sat, 31 Jan 2015 13:19:03 +0000 (13:19 +0000)]
pppoe: Enable PD by default
DHCPv6 prefix deleagtion is enabled by default and will
be executed when ever there is IPv6 connectivity on the
PPP link.
Michael Tremer [Sat, 31 Jan 2015 13:17:46 +0000 (13:17 +0000)]
ppp: Always request DNS servers from remote
We can decide later if we want to use them, but we will
always try to get them.