]>
git.ipfire.org Git - people/ms/network.git/log
Michael Tremer [Thu, 20 Sep 2018 22:26:45 +0000 (23:26 +0100)]
port: ethernet: Allow setting duplex mode
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 22:19:02 +0000 (23:19 +0100)]
port: ethernet: Allow setting link speed
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 22:18:04 +0000 (23:18 +0100)]
port: ethernet: Bring back accidentially dropped hook_create function
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 22:05:00 +0000 (23:05 +0100)]
port: ethernet: Return OK only to rename ports
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 22:04:44 +0000 (23:04 +0100)]
port: ethernet: Use default hook_new() function
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 22:04:21 +0000 (23:04 +0100)]
header-port: Start with empty set of settings
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 22:01:42 +0000 (23:01 +0100)]
port: ethernet: Allow setting the MTU
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 21:42:54 +0000 (22:42 +0100)]
Restart ports after edit to apply settings
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 21:35:58 +0000 (22:35 +0100)]
header-port: Print errors if config could not be read/written
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 21:33:07 +0000 (22:33 +0100)]
ports: ethernet: Allow changing MAC address
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 20 Sep 2018 21:16:00 +0000 (22:16 +0100)]
Add support for LEDs
This patch configures LEDs on some Wireless PHYs to flash
on activity. This makes debugging easier.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 16:45:32 +0000 (17:45 +0100)]
hostapd: Add support for 802.11ac
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 15:01:34 +0000 (16:01 +0100)]
hostapd: Always enable 802.11d
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 14:59:53 +0000 (15:59 +0100)]
hostapd: Write VHT capabilities to configuration
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 14:56:33 +0000 (15:56 +0100)]
libnetwork: Actually store index
Index was always zero and therefore only the first PHY could
be queried only.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 14:46:21 +0000 (15:46 +0100)]
libnetwork: Remove debug output
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 14:42:20 +0000 (15:42 +0100)]
libnetwork: Fix typo in RX-LDPC HT capability
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 14:41:16 +0000 (15:41 +0100)]
libnetwork: Fix looping though HT capabilities
The last capability was never looped through
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 14:39:48 +0000 (15:39 +0100)]
ibnetwork: Add command to show available VHT capabilities of phys
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 13:02:09 +0000 (14:02 +0100)]
hostapd: Always enable all HT caps
Signed-off-by: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 12:10:41 +0000 (14:10 +0200)]
ip-tunnel: Make --peer optional
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 11:46:53 +0000 (13:46 +0200)]
ipsec: VTI keys are static now and don't need to be updated
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 19 Sep 2018 11:43:58 +0000 (13:43 +0200)]
ipsec: GRE/VTI connections are now possible as on-demand
This change implements using zones as GRE/VTI devices so that
we can use IPsec connections in on-demand mode, too.
The device will be created first (as a zone) and might trigger
an IPsec connection. If that happens, the settings of the device
will be updated automatically.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 18 Sep 2018 12:01:12 +0000 (14:01 +0200)]
ip-tunnel: Add support for VTI interfaces
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 18 Sep 2018 11:33:30 +0000 (13:33 +0200)]
ipsec: Show ZONE setting when configuration is being dumped
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 18 Sep 2018 11:30:17 +0000 (13:30 +0200)]
ipsec: Change mode to transport/tunnel only
VTI is being removed and will be possible via the new
zone command.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 18 Sep 2018 11:21:19 +0000 (13:21 +0200)]
ipsec: Allow adding a zone to a VPN connection
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 18 Sep 2018 10:16:02 +0000 (12:16 +0200)]
ipsec: security policies: Fix typos in plural variables
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 15:23:44 +0000 (16:23 +0100)]
nitsi: Add tests for ip-tunnels in GRE mode
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 14:54:45 +0000 (16:54 +0200)]
Makefile: Forgot to remove 6to4-tunnel hook
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 14:46:16 +0000 (15:46 +0100)]
Merge remote-tracking branch 'jschlag/master'
Michael Tremer [Mon, 17 Sep 2018 14:30:17 +0000 (16:30 +0200)]
Drop 6to4-tunnel hook which is (partly) replaced by ip-tunnel
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 14:06:38 +0000 (16:06 +0200)]
man: Add documentation for IP tunnel hook
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 13:30:00 +0000 (15:30 +0200)]
Add generic IP tunnel zone hook
This is useful to create GRE connections and can easily
be extended to do more later.
Fixes: #11607
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 13:29:32 +0000 (15:29 +0200)]
ip-tunnel: Create a function that determines if all IP addresses match
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 13:25:55 +0000 (15:25 +0200)]
ip-tunnel: Fix protocol detection when local address is empty
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 11:49:24 +0000 (13:49 +0200)]
ipsec: security policies: Add documentation for pseudo-random-functions command
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Mon, 17 Sep 2018 11:45:49 +0000 (13:45 +0200)]
CLI: Fix destroying zones
The old delayed removal process doesn't exist any more
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 14:16:43 +0000 (16:16 +0200)]
Merge remote-tracking branch 'upstream/master'
Michael Tremer [Sun, 16 Sep 2018 14:15:53 +0000 (15:15 +0100)]
ipsec: security policies: Make integrity command plural
References: #11446
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 14:15:52 +0000 (16:15 +0200)]
Merge remote-tracking branch 'upstream/master'
Jonatan Schlag [Sun, 16 Sep 2018 14:13:56 +0000 (16:13 +0200)]
Move vpn tests into an own directory structure
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 14:11:36 +0000 (15:11 +0100)]
ipsec: security policies: Make group type command plural
References: #11446
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 14:00:00 +0000 (16:00 +0200)]
Adjust include paths because of the new include path feature
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 14:00:42 +0000 (16:00 +0200)]
ipsec: security policies: Show PRFs when dumping SecPol conf
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 13:57:31 +0000 (15:57 +0200)]
ipsec: security polices: Make cipher command plural
References: #11446
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 13:54:04 +0000 (15:54 +0200)]
Use new include path feature of nitsi
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 13:51:31 +0000 (15:51 +0200)]
ipsec: security-policies: Make PRF command plural
References: #11446
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 13:45:45 +0000 (15:45 +0200)]
ipsec: security-policies: Add CLI to modify PRFs
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 13:19:55 +0000 (15:19 +0200)]
ipsec: Generate IKE proposals with PRFs
This is now a requirement for AEAD ciphers and strongswan
refuses to start.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 12:36:26 +0000 (14:36 +0200)]
Nitsi: port vlan test- check if detach works
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 12:03:37 +0000 (14:03 +0200)]
Add vlan port test for nitsi
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 11:53:53 +0000 (12:53 +0100)]
Merge remote-tracking branch 'jschlag/master'
Michael Tremer [Sun, 16 Sep 2018 11:52:39 +0000 (12:52 +0100)]
nitsi: Add test for PPPoE server/client
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 11:50:30 +0000 (12:50 +0100)]
pppoe: Bring up port when zone is coming up
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 11:16:23 +0000 (13:16 +0200)]
Add VPN n2n tests for vti
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sun, 16 Sep 2018 11:13:43 +0000 (13:13 +0200)]
Use new phase1 and setup recipes in vpn tests
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 08:21:53 +0000 (09:21 +0100)]
nitsi: Make sure that we are always running with the most recent source
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 08:16:21 +0000 (09:16 +0100)]
nitsi: Automatically drop to a shell in case a test fails
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 09:26:22 +0000 (11:26 +0200)]
pppoe-server: Run with absolute path
Because PATH has been changed this script is executing
itself recursively
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 09:24:28 +0000 (11:24 +0200)]
pppoe-server: Read configuration again
This was broken since config IDs have been introduced
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 16 Sep 2018 08:55:38 +0000 (10:55 +0200)]
Install ppp scripts with executable permissions
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 22:14:36 +0000 (00:14 +0200)]
Merge remote-tracking branch 'upstream/master'
Michael Tremer [Sat, 15 Sep 2018 22:11:36 +0000 (23:11 +0100)]
nitsi: Drop Hello World test
This is a little bit useless now that we have tests
that do stuff that is more useful.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 21:57:09 +0000 (22:57 +0100)]
nitsi: Add phase1
This is supposed to be a good base to build on for any test that
needs a working layer 2 and some IP addresses on the network
to reach any other machines
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 16:04:40 +0000 (17:04 +0100)]
Make make distcheck happy
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 15:59:49 +0000 (17:59 +0200)]
Change ipv6 addresses from global to "private" addresses in nitsi
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 15:55:01 +0000 (17:55 +0200)]
Make setting of traffic selectors in nitsi test easier
We now include the file for ipv4 and for ipv6 into the file for ipv64
which makes maintenance easier.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 15:49:26 +0000 (17:49 +0200)]
Include ping test of ipv4 and ipv6 into ipv64 test
This make changing ip addresses easier.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 18:40:31 +0000 (20:40 +0200)]
Makefile: Install dhclient-helper as an executable script
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 15:59:49 +0000 (17:59 +0200)]
Change ipv6 addresses from global to "private" addresses in nitsi
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 15:55:01 +0000 (17:55 +0200)]
Make setting of traffic selectors in nitsi test easier
We now include the file for ipv4 and for ipv6 into the file for ipv64
which makes maintenance easier.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 15:49:26 +0000 (17:49 +0200)]
Include ping test of ipv4 and ipv6 into ipv64 test
This make changing ip addresses easier.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 15:06:05 +0000 (16:06 +0100)]
vpn: Poly1305 is AEAD
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 14:58:16 +0000 (15:58 +0100)]
nitsi: Rename make-install include file to setup
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 14:53:25 +0000 (15:53 +0100)]
nitsi: Include some inital commands in make-install template
This allows us to have a couple fewer includes
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 13:33:55 +0000 (14:33 +0100)]
nitsi: Install configuration files into the right place
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 13:32:22 +0000 (14:32 +0100)]
nitsi: Remove lines that are already in the default settings file
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sat, 15 Sep 2018 13:29:48 +0000 (14:29 +0100)]
nitsi: Remove reference to non-existant strongswan.conf file
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 13:25:08 +0000 (15:25 +0200)]
Merge branch 'nitsi-zone-commands'
Michael Tremer [Sat, 15 Sep 2018 12:49:59 +0000 (13:49 +0100)]
IPsec: Add support for ChaCha20-Poly1305
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Stefan Schantl [Sat, 11 Aug 2018 19:21:27 +0000 (21:21 +0200)]
Fix hook for static address configuration.
Add the required hook_new function and "id" information which have been
introduced in earlier commits to make this hook work again.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Tested-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 11:59:24 +0000 (13:59 +0200)]
Add recipe for port vars
These vars contain the port name which is plugged into the virtual
network.
As this relation changes every reboot these vars make it possible to
write recipes which depends on correct links between two ports.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 11:57:21 +0000 (13:57 +0200)]
Add gitignore in include dir of nitsi recipes
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 11:48:08 +0000 (13:48 +0200)]
Add include recipe for nitsi vpn n2n tests
This recipes are the base for all n2n ipsec tests.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 15 Sep 2018 11:41:55 +0000 (13:41 +0200)]
Add default settings file for nitsi tests
This makes writing a test much faster.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Michael Tremer [Wed, 15 Aug 2018 09:31:14 +0000 (10:31 +0100)]
reset: Trigger udev to re-add all network interfaces
Fixes: #11815
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 15 Aug 2018 09:26:51 +0000 (10:26 +0100)]
Remove registration of functions called on init
Only one function used this and it was slow since it got initialised
every time the functions were loaded.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 15 Aug 2018 09:24:05 +0000 (10:24 +0100)]
dns: Re-generate resolv.conf when flushing settings
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 11 Aug 2018 12:32:59 +0000 (14:32 +0200)]
Add a test to check that we can attach ports to a zone of type bridge
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Tue, 7 Aug 2018 17:15:34 +0000 (19:15 +0200)]
Add new test zone-new-bridge
This test checks if we can create a new zone of type bridge.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Jonatan Schlag [Sat, 28 Jul 2018 11:59:16 +0000 (13:59 +0200)]
Add test for command raw device-get-by-mac-address
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 28 Jul 2018 11:59:15 +0000 (13:59 +0200)]
Add new function device_get_by_mac_address()
We need this function and the command to identify ports in a nitsi test.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 28 Jul 2018 11:59:14 +0000 (13:59 +0200)]
Add recipe to set network settings
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 28 Jul 2018 11:59:13 +0000 (13:59 +0200)]
Add recipe to reset network configuration
We use --force here to avoid the y/n question.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 30 Jun 2018 15:54:04 +0000 (17:54 +0200)]
Add include dir for nitsi test
When we include recipes in our recipe we must be shure in some cases
that the recipe are generated out of a .in file.
All files in the include dir will be generated before every test so we
can be shure that these files are present.
This is useful for recipes like the make-install recipe in this test,
which needs to be generated and will be included in nearly every test.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Sat, 30 Jun 2018 15:53:48 +0000 (17:53 +0200)]
Fix network reset
The functions zone_destroy and zone_destroy_now where merged to
zone_destroy in an earlier commit. So we have to use zone_destroy here.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Mon, 25 Jun 2018 09:01:43 +0000 (11:01 +0200)]
We need to change the path of the image in the settings file to
When we do not change this path accordingly to the place where we store
our images the copy in feature does not work.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Mon, 25 Jun 2018 09:01:42 +0000 (11:01 +0200)]
Adapt settings file of nitsi tests to new syntax
Nitsi is using a new syntax for settings file so we need to change the
settings files of our tests.
I dropped some settings in the hello-world test because we do not need
them for this test.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Jonatan Schlag [Mon, 25 Jun 2018 09:01:41 +0000 (11:01 +0200)]
Adapt nitsi command line to new syntax
Nitsi is now using subparsers so we have to add 'run-test' to the
command line.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>