Enable multi chip support in the NAND layer

[people/ms/u-boot.git] / CHANGELOG

commit 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5
Author: Vivek Kutal <vivek.kutal@azingo.com>
Date:	Mon Feb 23 21:35:11 2009 +0530

    Replaced endpoint numbers with appropriate macros in usbtty.c.

    Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit a43ea5cc6d612471fbc74f0a26b2bea5864aa1d6
Author: Jon Smirl <jonsmirl@gmail.com>
Date:	Thu Mar 19 23:04:18 2009 -0400

    .gitignore for generated files in api_examples directory

    Add .gitignore for generated files in api_examples directory

    Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 40281a9ca21a6b6d7b996b4d4eeaa19026337231
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Wed Mar 18 12:27:04 2009 +0900

    net: sh_eth: Remove sh_eth_reset() from halt function

    sh_eth_reset is function to reset Ether IP.
    The MAC address is stored in IP, but it is initialized by this function.
    OS (e.g. Linux Kernel) can not use this device when initialized.
    This revises this problem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

commit f8853d105da7d69bc92a5b4578f9b85234e558ec
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Mar 20 12:45:50 2009 +0100

    ppc4xx: Fix bug in PCI outbound map configuration for canyonlands

    PCI outbound address map configuration doesn't match the
    PCI memory address range covered by appropriate TLB entry
    configuration for canyonlands causing machine check
    exceptions while accessing PCI memory regions. This patch
    provides a fix for this issue.

    Kazuaki Ichinohe observed and reported this issue while
    testing display output with PCI ATI video card on canyonlands.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7a88601a34132548c3c591ea87ab3468b51121b0
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Mar 6 10:09:37 2009 -0500

    CFI: geometry reversal for STMicro M29W320DT

    Follow up to the flash_fixup_stm to fix geometry reversal
    on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 069f4364d807d7fdea3de7385ad2f8d83c587aec
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Feb 25 17:29:40 2009 -0500

    smc911x_eeprom: update register API

    The smc911x driver changed the naming convention for its register funcs,
    so update the eeprom code accordingly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    CC: Ben Warren <biggerbadderben@gmail.com>

commit 6a397ef0e6c58caab8bf427d447714bc9b3bb9d4
Author: Grzegorz Bernacki <gjb@semihalf.com>
Date:	Tue Mar 17 10:06:39 2009 +0100

    mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c

    Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select.
    To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new
    define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by
    Total5200 and will be used by digsy MTC and other boards with
    ATA CS on I2C pins.

    Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>

commit 1b6275dfb173bd2edb8f208dd050d6f47ae39654
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Mar 12 07:37:34 2009 +0100

    8xx: add support for new keymile kmsupx4 board.

    This patch adds support for the kmsupx4 board from Keymile,
    based on a Freescale MPC852T CPU

    - serial console on SMC1
    - 32 MB SDRAM
    - 32 MB NOR Flash
    - Ethernet over SCC3
    - I2C Bitbang

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit d044954fe2a7e7a3dd104eb9c9d2104e38da2911
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Mar 12 07:37:28 2009 +0100

    8xx, mgsuvd: rename board to a more generic name

    renaming the "mgsuvd" board port into "km8xx", because
    there come more similar boards from keymile.
    Compiling the mgsuvd board with "make mgsuvd_config"
    remains.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 18b2f35bde1672e074a3d5048383cb56fda745cb
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Mar 12 07:37:23 2009 +0100

    8xx, mgsuvd: Coding Style cleanup config file

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 364123db6730d32330f818b65360d2cd27396667
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Mar 12 07:37:18 2009 +0100

    powerpc: common updates for keymile boards

    - added to keymile-common.h:
      - bootcount support
      - COMMAND HISTORY
      - CONFIG_AUTO_COMPLETE
      - CONFIG_SYS_FLASH_PROTECTION
      - JFFS2 support
      - CONFIG_VERSION_VARIABLE
    - extracted common I2C settings for all boards
    - common default environment settings summarized

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 506f391888b82d1b83bdd749c3cea9eb2fd64df8
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Mar 12 07:37:15 2009 +0100

    8xx, icache: enabling ICache not before running from RAM

    with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache
    is not enabled before code runs from RAM.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit cabf7b9c83bd780a5805ddbb4c0ce431d5b9f9f3
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Mar 12 07:37:11 2009 +0100

    82xx, mgcoge: fix environment sector size

    Size of one environment sector is 0x20000.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 27057d416c7cc9eb1860953da8836352c07f13e9
Author: Ladislav Michl <ladis@linux-mips.org>
Date:	Mon Mar 16 23:27:31 2009 +0100

    NetStar: config reindentation

    Fix indentation broken by symbol renames. "Sort" driver related definitons.

    Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

commit 8d8235f84d3ef3f29b7d14e741369b5824b5bb4a
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Mar 17 11:21:43 2009 +0000

    ColdFire: Fix incorrect definition

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 9017d9325a5067b2ab0d70a2d3c907620c9ab7f8
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Mar 2 19:16:45 2009 +0000

    ColdFire: Fix M5329EVB and M5373EVB nand issue

    The Nand flash was unable to read and write properly
    due to Nand Chip Select (nCE) setup was in reverse
    order. Also, increase the Nand time out value to 60.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 42b68af1062f75bb4a91cf47e329a7e8100cd815
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Jan 27 15:19:35 2009 +0000

    ColdFire: PLATFORM_CPPFLAGS updates for new compiler

    Update PLATFORM_CPPFLAGS to accept 4.3.x version of
    ColdFire compiler.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit d6e4baf49987fc6f75e8574c0c27301a828b3132
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Jan 27 12:57:47 2009 +0000

    ColdFire: Provide gzip image size V2 & V3 platforms

    Default gzip bootm size is 8MB. Some platforms require
    more than 8MB

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit c3a9e6374210679a81f611c1bcf968988bc20e41
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Feb 18 11:49:31 2009 +0000

    ColdFire: Fix M54451 serial boot dram setup

    The serial boot dram extended/standard mode register was not
    setup and was using default DRAM setup causing the U-boot was
    unstable to boot up in serial mode.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 32d11d58159a575f08a982cad8a5a941ffe5cc3d
Author: arun c <arun.edarath@gmail.com>
Date:	Thu Dec 4 15:57:15 2008 +0530

    Coldfire: XL Bus minor fixes

    According to coldfire manual data timeout > address time out
    also use correct macro to program XARB_CFG

    Signed-off-by: Arun C <arunedarath@mistralsolutions.com>

commit 65d8bc94d8214812ccdf3372d3fef845cf4ec2e5
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Mar 17 12:06:04 2009 -0500

    NAND: Have nboot accept .e and .i as legacy no-ops.

    This was intended to happen before, but a trivial bug prevented it.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 0987505540918b2464b73069af3a5b766dbd3ceb
Author: Ladislav Michl <ladis@linux-mips.org>
Date:	Fri Mar 13 14:38:19 2009 +0100

    NAND: Make nboot skip bad blocks

    nboot command currently does not skip bad blocks and gives read error when
    loading image stored over bad block. With patch applied, nboot works as
    expected:

    Device 0 bad blocks:
      00780000
      014a0000
      02000000
      02cc0000
      04aa0000

    Loading from NAND 128MiB 3,3V 8-bit, offset 0x2c00000
       Image Name:   Linux-2.6.22-omap1
       Created:      2008-11-20  23:44:32 UTC
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    1052520 Bytes =  1 MB
       Load Address: 10008000
       Entry Point:  10008000
    Skipping bad block 0x02cc0000
    Automatic boot of image at addr 0x10400000 ...
    ...

    Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 0b2f38fe3c4555dd2b81c69880403c13ad723153
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 12 07:27:25 2009 +0100

    ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration

    This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
    the DDR2 configuration to only use one CS (rank). As this code is most
    likely copied from the original Sequoia version, this error was copied
    as well.

    This patch also removes some dead code.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9199b9cc8f56aca26504b48cf702176208f46e54
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 12 07:24:40 2009 +0100

    ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration

    This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
    the DDR2 configuration to only use one CS (rank). As this code is most
    likely copied from the original Sequoia version, this error was copied
    as well.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ee86fd15e1ccda4be41f1dba82b8c9efea9a3145
Author: Mikhail Zolotaryov <lebon@lebon.org.ua>
Date:	Wed Mar 11 10:54:46 2009 +0200

    Fix AMCC Sequoia board DDR memory configuration

    Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D)
    specifies that BankSel#1 is not connected, while bootloader memory
    configuration is (board/amcc/sequoia/sdram.c):
	   mtsdram(DDR0_10, 0x00000300);
    i.e. both Chip Selects used - not correct.

    If we change to correct value here:
	   mtsdram(DDR0_10, 0x00000100);
    memory is accessible OK also.

    Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b3dd629e78870ba2dc9f8032978721c0fa02a856
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 15 22:40:09 2009 +0100

    Prepare 2009.03-rc2

    Update CHANEGLOG, fix minor coding style issue.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date:	Fri Mar 13 11:40:10 2009 -0400

    mpc83xx: Add bank configuration to FSL spd_sdram.c

    The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
    bank SDRAMs.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
    Acked-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b581626c1e2474a3dadf69d4f0e0582eccbc4235
Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
Date:	Fri Mar 13 08:58:14 2009 +0100

    mpc83xx: correctly set encryption and I2C bus 0 clock

    This patch makes sure the correct mask is applied when setting
    the encryption and I2C bus 0 clock in SCCR.
    Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
    won't function.

    Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit e6a6a704151c2d7e4a7b485545b48a6020ccca17
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Thu Mar 12 19:30:50 2009 +0100

    OMAP3: Add support for OMAP3 die ID

    Read and store OMAP3 die ID in U-Boot environment.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit f949bd8d089ec3059c460ac829c0d919e1d7af0e
Author: Jon Smirl <jonsmirl@gmail.com>
Date:	Wed Mar 11 15:08:56 2009 -0400

    MPC5200 FEC MII speed register

    Set a non-zero speed in the MII register so that MII commands will work.

    Signed-off-by: Jon Smirl <jonsmirl@gmail.com>

commit 94a353611b93ac4cb4434a5f7e98aa0902da919e
Author: Yusuke.Goda <goda.yusuke@renesas.com>
Date:	Fri Mar 13 16:08:18 2009 +0900

    sh: ap325rxa: Change the wait cycle in the area 5

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Feb 25 16:04:26 2009 +0900

    sh: Fix cannot work rtl8139 on r2dplus

    The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
    registration.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Feb 27 18:35:41 2009 +0900

    sh: Add netdev header fixing of warning/build

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit ada9318252f51c2626e9837c623f9812b0308dea
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Tue Mar 3 15:11:17 2009 +0900

    sh: Add support 32-Bit Extended Address Mode to sh7785lcr

    We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
    for this mode. This command changes PMB for using 512MB system memory.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 06b18163b57e6b0349b0c299222d50e7b1e41e50
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Feb 25 14:26:42 2009 +0900

    sh: Add some register value configurable to PCI of SH7780

    Some register value was hardcoded for System memory size 128MB and
    memory offset 0x08000000. This patch fixed the problem.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Feb 25 14:26:52 2009 +0900

    sh: Add system memory registration to PCI for SH4

    It is necessary for some pci device driver.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit b3061b40db691245a7bb9a55354b4edacbf3902d
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Feb 25 14:26:55 2009 +0900

    sh: Add value for PCI system memory registration of sh7785lcr

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6d84ae3956a6cd7aebd86f661130752594e60124
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Tue Mar 3 15:11:08 2009 +0900

    sh: Add macros for SH-4A 32-Bit Address Extended Mode

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Feb 3 13:35:05 2009 +0900

    sh: use write{8,16,32} in ms7720se lowlevel_init

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0452352df118bc9dd684a056aaaa5fb4aed1178a
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Mon Mar 9 18:07:53 2009 -0500

    tsec: report when there is no vendor specific PHY support

    Commit af1c2b84 added a generic phy support, with an ID of zero
    and a 32 bit mask; meaning that it will match on any PHY ID.

    The problem is that there is a test that checked if a matching
    PHY was found, and if not, it printed the non-matching ID.
    But since there will always be a match (on the generic PHY,
    worst case), this test will never trip.

    In the case of a misconfigured PHY address, or of a PHY that
    isn't explicitly supported outside of the generic support,
    you will never see the ID of 0xffffffff, or the ID of the
    real (but unsupported) chip.  It will silently fall through
    onto the generic support.

    This change makes that test useful again, and ensures that
    the selection of generic PHY support doesn't happen without
    some sort of notice.  It also makes it explicitly clear that
    the generic PHY must be last in the PHY table.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit c279dfc10186ceba78d3862036f158750e86599a
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Mar 9 10:53:05 2009 +0100

    SIMPC8313 board: fix out of tree building.

    Fix typo in makefile which broke out of tree builds.

    Also use expolicit "rm" instead of "ln -sf" which is known to be
    unreliable.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 49b5aff491bd574935ecaf8545152066a25eff3d
Author: ksi@koi8.net <ksi@koi8.net>
Date:	Mon Feb 23 10:53:13 2009 -0800

    Add eTSEC 1/2 IO override control (corrected)

    This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)

    Signed-off-by: Sergey Kubushyn <ksi@koi8.net>

commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc
Author: Andy Fleming <afleming@freescale.com>
Date:	Fri Mar 6 19:05:52 2009 -0600

    fsl: Remove unnecessary debug printfs

    These were left in accidentally, and are not really useful unless the
    code is as broken as it was when it was being developed.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Tue Feb 24 02:37:59 2009 -0600

    Fix mpc85xx ddr-gen3 ddr_sdram_cfg.

    Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
    sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit a922fdb87af25c25c032424908dcf60fbf3250ea
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Feb 24 06:13:10 2009 +0100

    PXA: timer use do_div and simplify it

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Mar 9 10:51:39 2009 +0100

    SIMPC8313 board: fix out of tree building.

    Fix typo in makefile which broke out of tree builds.

    Also use expolicit "rm" instead of "ln -sf" which is known to be
    unreliable.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:51 2009 +0100

    8360, kmeter1: added bootcount feature.

    add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.

    The bootcounter uses 8 bytes from the muram,
    because no other memory was found on this
    CPU for the bootcount feature. So we must
    correct the muram size in DTS before booting
    Linux.

    This feature is actual only implemented for
    MPC8360, because not all 83xx CPU have qe,
    and therefore no muram, which this feature
    uses.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 1e7ed2565031e01abc18c713030a0a9829c07684
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:48 2009 +0100

    83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1

    old code implemented the QE_ENET10 errata only for Silicon
    Revision 2.0. New code reads now the Silicon Revision
    register and sets dependend on the Silicon Revision the
    values as advised in the QE_ENET10 errata.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 605f78e34a3f0103693b891f2573edd352e7d495
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:44 2009 +0100

    83xx, kmeter1: updates for 2009.03

    - HRCW update
      HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
      HRCWH_LALE_EARLY added
    - DDR-SDRAM settings modified. This solves sporadically
      problems with this memory.
    - CS1 now 128 MB window size
    - CS3 now 512 MB window size
    - PRAM activated
    - MTDPARTS_DEFAULT defined
    - CONFIG_HOSTNAME added
    - MONITOR_LEN now 384 KB

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 118cbe3c35c898f8d020b29d6dc180307cacf147
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:40 2009 +0100

    83xx, kmeter1: autodetect size of DDR II RAM

    it is possible that some board variants have different DDR II
    RAM sizes. So we autodetect the size of the assembled RAM.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit c1bce4fff750d734b1fa7467eb08f93902c97ca6
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:37 2009 +0100

    83xx, i2c: add mux support for fsl_i2c

    This patch adds I2C mux support for the fsl_i2c driver. This
    allows you to add "new" i2c busses, which are reached over
    i2c muxes. For more infos, please look in the README and
    search for CONFIG_I2C_MUX.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:34 2009 +0100

    83xx, kmeter1: add I2C, dtt, eeprom support

    This patch adds I2C support for the Keymile kmeter1 board.
    It uses the First I2C Controller from the CPU, for
    accessing 4 temperature sensors, an eeprom with IVM data
    and the booteeprom over a pca9547 mux.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit db1d72afd77287bc8577210f3f71ab249dcf146f
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 24 11:30:30 2009 +0100

    i2c, dtt: move dtt_init () to board_init_r ()

    In case where a board not uses CONFIG_POST, it is not
    necessary to init the DTTs when running from flash.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 5b0055547f0246908b79cc300170d87380b69e18
Author: Dave Liu <daveliu@freescale.com>
Date:	Wed Feb 25 12:31:32 2009 +0800

    83xx: Fix some bugs in spd sdram code

    1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
      tRTP according to DDR2 JEDEC spec.
    2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
    3. add the support of DDR2-533,667,800 DIMMs
    4. cpo
    5. make the AL to min to gain better performance.

    The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
    MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.

    items 1, 2 and 5:
    Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

    Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b7be63abec45858c044f0fbd6aeef524c4663f9b
Author: Valeriy Glushkov <gvv@lstec.com>
Date:	Wed Feb 4 18:27:49 2009 +0200

    MPC8349ITX: several config issues fixed

    The previous version rebooted forever with DDR bigger than 256MB.
    Access the DS1339 RTC chip is on I2C1 bus.
    Allow DHCP.

    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:39 2009 +0300

    mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal

    The SerDes initialization should be finished before negating the reset
    signal according to the reference manual. This isn't an issue on real
    hardware, but we'd better stick to the specifications anyway.

    Suggested-by: Liu Dave <DaveLiu@freescale.com>
    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Feb 25 12:28:32 2009 +0100

    i2c, dtt: move dtt_init () to board_init_r ()

    it is not necessary to init the DTTs so early,
    so move this init to board_init_r ().

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 00cc5595a7caac8066b408774383a956c2e26797
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Feb 25 20:28:13 2009 +0100

    lcd: Fix compilation warning in common/lcd.c

    Fix following warning while compilation for mcc200 board:

    lcd.c: In function 'lcd_display_bitmap':
    lcd.c:625: warning: unused variable 'cmap'

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Tue Feb 24 21:11:24 2009 +1100

    Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb)

    Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb

    Signed-off-by: Graeme Russ <graeme.russ at gmail.com>

commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 23 10:29:47 2009 -0500

    smc911x: split out useful defines/functions into local header

    The smc911x driver has a lot of useful defines/functions which can be used
    by pieces of code (such as example eeprom programmers).  Rather than
    forcing each place to duplicate these defines/functions, split them out
    of the smdc911x driver into a local header.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>
    CC: Sascha Hauer <s.hauer@pengutronix.de>
    CC: Guennadi Liakhovetski <lg@denx.de>
    CC: Magnus Lilja <lilja.magnus@gmail.com>
    CC: Ben Warren <biggerbadderben@gmail.com>

commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Tue Feb 24 10:44:02 2009 +0100

    ARM: add an "eet" variant of the imx31_phycore board

    The "eet" variant of the imx31_phycore board has an OLED display, using a
    s6e63d6 display controller on the first SPI interface, using GPIO57 as a
    chip-select for it. With this configuration you can display 256 colour BMP
    images in 16-bit RGB (RGB565) LCD mode.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Fri Feb 6 10:37:57 2009 +0100

    video: add an i.MX31 framebuffer driver

    Add a driver for the Synchronous Display Controller and the Display
    Interface on i.MX31, using IPU for DMA channel setup. So far only
    displaying of bitmaps is supported, no text output.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Anatolij Gustschin <agust@denx.de>

commit b245e65ee3c4cce3ccf008a21f4528239655876c
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Fri Feb 6 10:37:53 2009 +0100

    LCD: support 8bpp BMPs on 16bpp displays

    This patch also simplifies some ifdefs in lcd.c, introduces a generic
    vidinfo_t, which new drivers are encouraged to use and old drivers to switch
    over to.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Anatolij Gustschin <agust@denx.de>

commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1
Author: Mark Jackson <mpfj@mimc.co.uk>
Date:	Fri Feb 6 10:37:49 2009 +0100

    Add 16bpp BMP support

    This patch adds 16bpp BMP support to the common lcd code.

    Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.

    At the moment it's only been tested on the MIMC200 AVR32 board, but extending
    this to other platforms should be a simple task !!

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Anatolij Gustschin <agust@denx.de>

commit 689551c5ff1b394b88412f3df22144e79468d3a9
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Fri Feb 6 10:37:41 2009 +0100

    A driver for the S6E63D6 SPI display controller from Samsung

    This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
    It only provides access to controller's registers so the client can freely
    configure it.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Anatolij Gustschin <agust@denx.de>

commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Fri Feb 13 09:26:40 2009 +0100

    i.MX31: support GPIO as a chip-select in the mxc_spi driver

    Some SPI devices have special requirements on chip-select handling.
    With this patch we can use a GPIO as a chip-select and strictly follow
    the SPI_XFER_BEGIN and SPI_XFER_END flags.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b30de3cccf8867566cd314e7c7033904afa5dc9d
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sat Feb 7 01:18:07 2009 +0100

    i.MX31: add a simple gpio driver

    This is a minimal driver, so far only managing output. It will
    be used by the mxc_spi.c driver.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sat Feb 7 00:09:12 2009 +0100

    i.MX31: fix SPI driver for shorter than 32 bit

    Fix setting the SPI Control register, 8 and 16-bit transfers
    and a wrong pointer in the free routine in the mxc_spi driver.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:52 2009 +0300

    mpc83xx: MPC837XERDB: Add PCIe support

    On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
    slots. Let's support them.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:50 2009 +0300

    mpc83xx: PCI: Fix hard-coded first_busno value

    We should use pci_last_busno() in pci_init_bus(), otherwise we'll
    erroneously re-use PCI0's first_busno for PCI1 hoses.

    NOTE: The patch is untested. All MPC83xx FSL boards I have have
    PCI1 in miniPCI form, for which I don't have any cards handy.

    But looking in cpu/mpc85xx/pci.c:
    ...
    #ifdef CONFIG_MPC85XX_PCI2
	    hose = &pci_hose[1];

	    hose->first_busno = pci_hose[0].last_busno + 1;

    And considering that we do the same for MPC83xx PCI-E support,
    I think this patch is correct.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit a5878d427128c1a9226045ebe05fbadaa02eb9dd
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:46 2009 +0300

    mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers

    This patch fixes copy-paste issue: pci_hose[0]'s first and last
    busnos were used to fixup pci1's nodes.

    We don't see this bug triggering only because Linux reenumerate
    buses anyway.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b24a99f6666ac278ec9f9c1334518af828833d19
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:44 2009 +0300

    mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values

    This patch fixes an issue in config space read accessors: we should
    fill-in the value even if we fail (e.g. skipping devices), otherwise
    CONFIG_PCI_SCAN_SHOW reports bogus values during boot up.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:42 2009 +0300

    mpc83xx: PCIe: Don't start bus enumeration at 0

    Currently we assign first_busno = 0 for the first PCIe hose, but this
    scheme won't work if we have ordinary PCI hose already registered (its
    first_busno value is 0 too).

    The old code worked fine only because we have PCI disabled on
    MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3
    "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
    But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
    triggers.

    So, to fix the issue, we should use pci_last_busno() + 1 for the
    first_busno (i.e. last available busno).

    Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit cc2a8c7751ddbae3116660064f446888538b93e9
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Feb 19 18:20:41 2009 +0300

    PCI: Add pci_last_busno() helper

    This is just a handy routine that reports last PCI busno: we walk
    down all the hoses and return last hose's last_busno.

    Will be used by PCI/PCIe initialization code.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Mon Feb 23 13:56:51 2009 -0600

    MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default

    Currently, we get 256MB as the default, but since all the 86xx
    board configs define a 2G BAT mapping for RAM, raise default
    to 2G.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Thu Feb 12 10:43:32 2009 -0600

    mpc8641hpcn: Indicate 36-bit addr map in boot messages

    If 36-bit addressing is enabled, print a message on the console
    when we boot.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 10 09:38:52 2009 +0100

    netloop: speed up NetLoop

    NetLoop polls every cycle with getenv some environment variables.
    This is horribly slow, especially when the environment is big.

    This patch reads only the environment variables in NetLoop,
    when they were changed.

    Also moved the init part of the NetLoop function in a seperate
    function.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Dec 22 02:56:07 2008 -0500

    smc911x_eeprom: new example app for managing newer SMC parts

    A forward port of the last version to work with the newer smc911x driver.
    I only have a board with a LAN9218 part on it, so that is the only one
    I've tested.  But there isn't anything in this that would make it terribly
    chip specific afaik.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    CC: Sascha Hauer <s.hauer@pengutronix.de>
    CC: Guennadi Liakhovetski <lg@denx.de>
    CC: Magnus Lilja <lilja.magnus@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6
Author: Pieter Henning <phenning@vastech.co.za>
Date:	Sun Feb 22 23:17:15 2009 -0800

    Added Vitesse VSC8211 definitions to TSEC driver

    Added the struct containing PHY settings for the Vitesse VSC8211 phy to
    the phy_info list in tsec.c

    Signed-off-by: Pieter Henning <phenning@vastech.co.za>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 32688e572ff96715b41420e9a7f280db6c399b65
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Feb 23 00:22:21 2009 +0100

    Update CHANGELOG;  Prepare 2009.03-rc1

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 80b827c2b78329c6503b271e43d9eb693d644710
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Feb 22 23:45:40 2009 +0100

    ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5

    The file was generated from building versatile_defconfig.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 14209ac13ff631e36c9a9dd426c59c2e2f5dab00
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sun Feb 22 14:24:11 2009 +0900

    MIPS: Fix GCC-4.2 'discards qualifiers from pointer target type' warnings

    Compiling dbau1x00 and gth2 boards with GCC-4.2, you would see new warnings
    like this:

    skuribay@ubuntu:u-boot.git$ ./MAKEALL dbau1000
    Configuring for dbau1x00 board...
    au1x00_eth.c: In function 'au1x00_send':
    au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
    au1x00_eth.c: In function 'au1x00_recv':
    au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
    au1x00_eth.c: In function 'au1x00_init':
    au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
    au1x00_eth.c: In function 'au1x00_recv':
    au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
    au1x00_eth.c: In function 'au1x00_init':
    au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
    au1x00_eth.c: In function 'au1x00_send':
    au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type

    We're passing a volatile pointer to a function which is expecting a non-
    volatile pointer.  That's potentially dangerous, so gcc warns about it.
    Confirmed with ELDK 4.2 (GCC 4.2.2) and Sourcey G++ 4.2 (GCC 4.2.3).

    To fix this, we add a volatile attribute to the argument in question.
    The virt_to_phys function in Linux kernel also does the same thing.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit aba45c85b22f8c57fc2fedba8e948e06c2e2f5b3
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Fri Feb 20 17:51:28 2009 +0100

    OMAP3: Clean up MMC code

    Clean up OMAP3 MMC code:

    * Convert register access to struct & readx/writex style
    * Replace hardcode values by macros
    * Remove macro defined twice

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit cfcdf4a9b361d015c0debac73fbf7c511df4a934
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Thu Feb 12 18:55:43 2009 +0100

    OMAP3: Pandora: Update pin mux

    Clock pin must have input enabled for MMC3 to work.
    Also enable pull-ups for cmd/data lines to be consistent
    with remaining MMC host pin setup.

    Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

commit 6530a8bf8a0274b9419141e4c2c5a235cce5380f
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Thu Feb 12 18:55:42 2009 +0100

    OMAP3: Add OMAP3 auto detection

    This patch adds OMAP3 cpu type auto detection based on OMAP3 register
    and removes hardcoded values.

    Signed-off-by: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit f956fd0338f4990793a10f767929ba4963665261
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Thu Feb 12 18:55:41 2009 +0100

    OMAP3: Beagle: Add board revision detection

    With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
    which might need different software handling. For this, GPIO pin 171 (GPIO
    module 6, offset 11) can be used to check for board revision. If this pin
    is low, we have a rev C board. Else it must be a revision Ax or Bx board.

    To handle board differences you can call function beagle_get_revision().
    E.g.:

    if (beagle_get_revision()) {

    /* do special revision C stuff here */

    }

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 288f3cd912918b97919d13b6f7fb13fbddf74d68
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Thu Feb 12 18:55:40 2009 +0100

    OMAP3: Overo: Clean up pin mux and GPIO configuration

    * Make Overo GPIO114 an input for touchscreen PENDOWN
    * Make Overo GPIO144-147 readable
    * Make Overo EHCI pinmux match beagle rev c setup
    * Adjust pinmux for SMSC911X network chip support
    * Remove unnecessary GPIO setup
    * Fix merge error in Makefile

    Signed-off-by: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 2579019b8248e5f166e60e37065766efc8a49dbc
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 22 17:08:41 2009 +0100

    nmdk8815: fix onenand support

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0176c03a2469676df5bf19cf93a1a6f582f6a120
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 22 17:56:50 2009 +0100

    nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9751a456f702ba2fcdfd1bdbc0138927ef007858
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 22 17:49:43 2009 +0100

    davinci: fix implicit declaration of function 'davinci_errata_workarounds'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4f5728987f4f9f7845688482aa2b7f2127768165
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 22 15:49:28 2009 +0100

    arm: add uart dcc support

    Serial driver via the EmbeddedICE macrocell's DCC channel using
    co-processor 14.

    It does include a timeout to ensure that the system does not
    totally freeze when there is nothing connected to read.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0cd18fa982f9a8c1a90ce971379a7d6408976d48
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Fri Nov 21 14:35:56 2008 -0500

    ARM DaVinci: Add common peripherals and modules enable functions.

    Taken all the duplicated code for enabling common modules and apply
    software workarounds from the board specific code into common
    functions. Also added comments explaining the workarounds
    (from TI errata documents) and replaced some numerical bit numbers
    with more meaningful defines.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit d3be1bcae7a8207e0a79ffd035d0e90f80378295
Author: Alessandro Rubini <rubini@unipv.it>
Date:	Mon Feb 9 15:53:33 2009 +0100

    Enable Ethernet for Nomadik 8815 Evaluation Kit

    This trivially enables Ethernet support in the debug board
    by setting up the proper chip select.

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>

commit 0d8c6eab2481046e9446264bfe9402bb98ddf433
Author: Alessandro Rubini <rubini@unipv.it>
Date:	Mon Feb 9 15:53:31 2009 +0100

    Nand driver for Nomadik SoC

    This driver implements the ECC algorithm described in
    the CPU data sheet and uses the OOB layout chosen in
    already-released development systems (shipped with a custom-made
    u-boot 1.3.1).

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>

commit ef339cc2b68e4cbef3f9376a45315e1b974bbd8d
Author: Alessandro Rubini <rubini@unipv.it>
Date:	Mon Feb 9 15:53:31 2009 +0100

    Added nomadik.h header

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>

commit 60ece6d8043d1dd80f5dd32c541213716d624b19
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Oct 29 20:05:18 2008 +0900

    r8a66597-hcd: fix cannot use external hub

    Fix the problem that cannot use external hub, because this driver
    did not control correctly a DEVADDx register.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit e1ffaee728190e76a4596a3579d94e730143585f
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Feb 19 01:20:27 2009 -0500

    Blackfin: disable syscontrol code for now

    Looks like the initcode updates fell out of order during my merges.  The
    patch that really fixes up this code is part of power-on overhaul and so
    is too large for merging at this point.  Instead, we can disable the code
    as no currently in-tree board depends on it.  The next merge window will
    fix things up properly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 1b228d68f54832edd867ef98520f760f68192ab7
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Feb 19 01:19:49 2009 -0500

    Blackfin: bf537-stamp: fix I2C board defines

    The previous merge for cleaning up the I2C driver incorrectly reverted the
    CFG_xxx rename for some of the I2C defines.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 09fee8e8677a6265e89144ccc163bf00e321769e
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Feb 22 01:19:52 2009 +0100

    Coding Style cleanup; update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1dcb50afbb63a439320a985380a0af2dca079d1e
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Feb 22 01:17:47 2009 +0100

    Makefile: fix cleanup

    Commit e4943ec5 moved the ARM boards to a vendor directory but forgot
    to adapt the cleanup rules in the Makefile

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit edff7bcc4d5540df8b416274652ff02e94c38b9e
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Feb 20 13:01:56 2009 -0500

    Cleanup the comment for m68k linux boot argument passing.

    This patch clarifies the way m68k passes linux boot argument.
    The one gotcha here is that the assembly instruction that
    the compiler uses to jump to the kernel is 'jsr' which pushes the
    program counter for the instruction after the jsr into the stack pointer.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4d41650eec959668280a612467bd95c7b8398513
Author: Peter Griffin <pgriffin@mpc-data.co.uk>
Date:	Tue Feb 10 16:44:45 2009 +0000

    sh: Fix rsk7203 in tree build

    Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>

commit fca0cecff73db99d99ad094cca7980472b8a11b5
Author: Minkyu Kang <mk7.kang@samsung.com>
Date:	Wed Feb 18 09:05:52 2009 +0900

    bootm: Reduce the unnecessary memmove

    Although load address and image start address are same address,
    bootm command always does memmove.
    That is unnecessary memmove and can be taken few milliseconds
    (about 500 msec to 1000 msec).
    If skip this memmove, we can reduce the boot time.

    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit 670cbde8da83690fed1064c3358f54ae1d693ed2
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:	Sun Feb 15 22:29:15 2009 +0100

    fpga: Fix Spartan III FPGA booting

    This patch does some minor fixing of the Xilinx Spartan III
    FPGA boot code:

    - Fixed call order of post configuration callback and
      success message printing (result of copy-paste?)
    - remove obsolete comment
    - minor coding style cleanup

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 3818b677641038d27b2663fbd6771ad38c932f86
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:	Sun Feb 15 22:28:36 2009 +0100

    fpga: Fix Spartan II FPGA booting

    This patch does some minor fixing of the Xilinx Spartan II
    FPGA boot code:

    - Fixed call order of post configuration callback and
      success message printing (result of copy-paste?)
    - relocate post configuration callback only when it
      is implemented
    - remove obsolete comment
    - minor coding style cleanup

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit b4746d8bf9f4ed6dc8a76c5d52db669604aff84b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Feb 11 20:26:52 2009 -0500

    drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 6bcb4b806cef8a5dd08fac9a4a672b96d9ee804e
Author: Derek Ou <dou@siconix.com>
Date:	Tue Feb 3 16:00:07 2009 -0700

    lcd_putc bug fix for tab.

    Signed-off-by: Derek Ou <dou@siconix.com>

commit 35c9e14d8096e519fe76c953a43d52a09617345c
Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Date:	Mon Feb 2 09:46:21 2009 +0900

    MIPS: cpu/mips/Makefile: Add a missing START line

    In the commit 79b51ff8205f0354d5300570614c1d2db499679c ([MIPS] cpu/mips/
    Makefile: Split [CS]OBJS onto separate lines), I wrongly deleted a START
    line.  This patch puts it back.

    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>

commit 9a63b7f4f8f3c99cf017e0d3d4a152dfcd913b5a
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Feb 21 21:51:21 2009 +0100

    Enable ext2 support for TQM8xxL/M based boards

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e3ba7f137c7c454ad626cd0bd2e84d73c7a8644f
Author: Tom Rix <Tom.Rix@windriver.com>
Date:	Fri Feb 20 03:47:50 2009 +0100

    ARM:PXA Use new definitions in mmc.h

    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 682beeac34dc9ab18fab58b26973d2e29d113717
Author: Andy Fleming <afleming@freescale.com>
Date:	Fri Feb 20 03:47:50 2009 +0100

    Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions

    These names are being taken over by the new MMC framework.	Hopefuly
    the PXA can be easily ported, and these functions will go away entirely.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b03d92e5584935886ff91d5aa0755dc8888b7187
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Feb 20 03:47:50 2009 +0100

    pxa: move mmc drivers to drivers/mmc

    introduce new macro CONFIG_PXA_MMC to activate it

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9490f465642c80c054854689a2ef1a77d65cf1f3
Author: Tom Rix <Tom.Rix@windriver.com>
Date:	Thu Feb 19 19:27:22 2009 -0600

    ARM:PXA Remove redefinition of mmc_cid and mmc_csd.

    These structures are defined in the common mmc.h

    This was compile checked on cerf250.

commit 94a3312920b6f9b5da27309549fb73650718c10a
Author: Micha Kalfon <smichak.uv@gmail.com>
Date:	Wed Feb 11 19:50:11 2009 +0200

    pxa: fixing get_timer to return time in miliseconds.

    Fixing the get_timer function to return time in miliseconds instead of
    ticks. Also fixed PXA boards to use the conventional value of 1000 for
    CONFIG_SYS_HZ.

    Signed-off-by: Micha Kalfon <smichak.uv@gmail.com>

commit e5e88c3614b79b54719905f66aefb51f9494bc1f
Author: Tom Rix <Tom.Rix@windriver.com>
Date:	Thu Feb 19 16:45:43 2009 -0600

    ARM:OMAP3 Change mmc_init to mmc_legacy_init

    omap3_mmc.c was changed to define mmc_legacy_init.
    Remove unused functions.

    Compile tested on all arm
    Runtime tested on Zoom1.

    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit 9e80bb21629988063574f88ca0d28baadff4d963
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Feb 19 17:23:58 2009 +0100

    82xx, mgcoge: updates for 2009.03

    - activate CS4 for accessing the FPGA
    - activate Rx buf len > 1 on SMC
    - pram activated
    - MTDPARTS_DEFAULT defined
    - update the size of the flashes in the DTS
      before booting Linux
    - MONITOR_LEN updated to 384k
    - added CONFIG_HOSTNAME
    - added CONFIG_ENV_BUFFER_PRINT
    - Environment size reduced to 16k

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit df909554e2401f307925e1bd45d576e4176d9de9
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Feb 19 17:24:01 2009 +0100

    8xx, mgsuvd: updates for 2009.03

    - activate Rx buf len > 1 on SMC
    - pram activated
    - MTDPARTS_DEFAULT defined
    - update the size of the flash in the DTS
      before booting Linux
    - MONITOR_LEN updated to 384k
    - added CONFIG_HOSTNAME
    - added CONFIG_ENV_BUFFER_PRINT
    - Environment size reduced to 16k

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 3511b4e208e12be85b532866f1c660aa2e021557
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Wed Feb 18 19:59:39 2009 +0100

    MMC: Don't use new framework code if not enabled

    Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
    isn't enabled.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 32482be67775e00b4cbc49fba62347c1ecc6229c
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Feb 19 13:53:29 2009 +0100

    TQM8xxL: make some room in low memory for future needs

    THe TQM8xxL use a ahnd-optimized linker script to efficiently use the
    small boot sectors in the flash. This patch makes some room in the
    first sector to prepare for a size increase of lib_generic/vsprintf.o
    by a future patch.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c157cec3c3f6dfc194532b3a3ca87f85b642962a
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 18 18:06:18 2009 -0600

    README: remove duplicate entry

    it's been around since the original commit (2ad6b513) that added two
    identical entries.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 1bba30efe1717bea13026e15c7c7d906419fac69
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Feb 19 00:41:08 2009 +0100

    Coding style cleanup, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 369d0aa9674b65c83f8553b9bcf9d207dc369223
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 18 17:43:59 2009 -0600

    sata_sil3114: fix compiler warning

    judging from other printfs in the same file, it seems ata should be
    postpended with the interface number, not the address of the global
    port variable.  Fixes this for current u-boot-mpc83xx tree:

    Configuring for MPC8349ITX board...
    sata_sil3114.c: In function 'sata_bus_softreset':
    sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
    sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit f5675aa5ceeef30740970ab8ca0c8cbc324945cd
Author: Ron Madrid <ron_madrid@sbcglobal.net>
Date:	Wed Feb 18 14:30:44 2009 -0800

    Create configuration option for restricted ns16550 functions

    This patch will create a configuration option for a minimum configuration for
    the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
    configuration option to the SIMPC8313.h config file in order to fix the NAND
    bootstrap build error.  This option will exclude all functions with exception of
    NS16550_putc and NS16550_init.  This will be used primarily to save space and
    remove unused code from builds in which space is limited.

    Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>

commit 7b0bc0219db8981613259473cf19699ac259b4fb
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 18 16:14:29 2009 -0600

    mkconfig: include board config.h before asm/config.h

    swapping the include order suppresses warnings for board configs
    that define their own CONFIG_MAX_MEM_MAPPED:

    In file included from /home/r1aaha/git/u-boot/include/config.h:5,
		    from /home/r1aaha/git/u-boot/include/common.h:35,
		    from simpc8313.c:26:
    /home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
    "CONFIG_MAX_MEM_MAPPED" redefined
    In file included from /home/r1aaha/git/u-boot/include/config.h:4,
		    from /home/r1aaha/git/u-boot/include/common.h:35,
		    from simpc8313.c:26:
    /home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
    the location of the previous definition

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b8845abdc0dcf20d0944e965153f5ae7a9c3077c
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Feb 18 21:35:38 2009 +0100

    Fix build errors after making flash_get_info() non-static

    Fix for these build problems:
    error: static declaration of 'flash_get_info' follows non-static declaration

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b4996d6b2140e5da7f1c346f37a67b19907b307a
Author: Stefan Roese <sr@denx.de>
Date:	Wed Feb 18 13:18:00 2009 +0100

    ppc4xx: PCIe: Change 16GB inbound memory to 4GB

    This patch fixes a problem recently seen on some 4xx platforms. For
    example on Kilauea PCIe slot #0.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f50fe4bd613c6d35a2c34055f02e9501dd6a9ad5
Author: Stefan Roese <sr@denx.de>
Date:	Wed Feb 18 14:05:37 2009 +0100

    ppc4xx: Some more PMC405 coding-style cleanup

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2f6eb9170bf91b72ea51dcea2a8b9c11b0e20bc5
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:	Sun Feb 15 22:27:47 2009 +0100

    ppc4xx: Update PMC405 board support

    This patch prepares the good old PMC405 board support for
    upcoming PMC405V2 patches.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c553b5f4a0c77fc76e1d25e71c8aaa47657e2d6f
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:	Sun Feb 15 22:26:54 2009 +0100

    ppc4xx: Cleanup PMC405 board support

    This patch fixes coding style for PMC405 board support.
    Also some unneeded features/code is removed.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b4e85d0f37b5b924fbf834867ad6d0b31b86f667
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Feb 5 04:08:20 2009 +0100

    qong: changes to Dave/DENX Qong configuration

    1. Changes to the default environment:
      - "bootcmd" defined as "run flash_self"
      - "saveenv" command removed from "update"
      - "uboot" changed to "u-boot" (also in "load")
      - "addmtd" variable defined (and added to all boot commands)
    2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
    3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
    4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
    with truncated "bootargs" environment variable.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 5f0320108870e5d62983d1d5c13a2a087dddf686
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 1 17:07:52 2009 +0100

    common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ec6f14994602276660f7264c6ab3b91ef1f7614d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 1 17:07:51 2009 +0100

    common/console: coding style cleanup

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit daaf74f176b548dfd34a9990231f4189201d57ba
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Jan 29 20:02:23 2009 -0500

    mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile

    Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
    into the Makefile so we avoid pointless compiling of the file.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7bd2722e890bc877a3c057d7ccddc80451c99939
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Jan 29 20:02:07 2009 -0500

    disk: convert part_* files to COBJ-$(CONFIG_XXX) style

    Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
    avoid pointless compiles.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f05fa9205e04986176dc7ab8b710bcb5fbe9f338
Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
Date:	Thu Jan 29 10:35:40 2009 +0200

    include/image.h: Ease grepping of image_* functions

    Because the functions have been defined using macros, grepping for
    their definitions is not possible. This patch adds the real function
    names in comments.

    Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
    Acked-by: Mike Frysinger <vapier@gentoo.org>

commit bdab39d358e63aa47f400a8a76b8d5f283842df3
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Jan 28 19:08:14 2009 -0500

    rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV

    The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
    rather than a generic "env" command, or anything else related to the
    environment.  So, let's make sure the define is named accordingly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8b0592b89e0f9f81c9e150c81d96f8a43e4d6101
Author: Valeriy Glushkov <gvv@lstec.com>
Date:	Fri Jan 23 20:02:17 2009 +0200

    disable imls command if no flash is defined

    Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined

    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>

commit 923aa48126259c13de95131203f1d28bfa5cb889
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Fri Jan 23 13:27:18 2009 +0100

    API: Improve glue mid-layer of the API demo application.

    - Extend ub_dev_read() and ub_dev_recv() so they return the length actually
    read, which allows for better control and error handling (this introduces
    additional error code API_ESYSC returned by the glue mid-layer).

    - Clean up definitions naming and usage.

    - Other minor cosmetics.

    Note these changes do not touch the API proper, so the interface between
    U-Boot and standalone applications remains unchanged.

    Signed-off-by: Rafal Jaworowski <raj@semihalf.com>

commit 44a94e596ba0f6d0951b165403c520bf55b1c56f
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Fri Jan 23 13:27:17 2009 +0100

    API: Only output test data when reading was successful.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>

commit 7fb6c4f9b06c5539043c8bfc6565710b8090841d
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Fri Jan 23 13:27:16 2009 +0100

    API: Provide syscall entry point for the ARM architecture.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Acked-by: Rafal Jaworowski <raj@semihalf.com>

commit b84d7d8f1e1066f810866304a16a3583f88e7c98
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Fri Jan 23 13:27:15 2009 +0100

    API: Use stack pointer as API signature search hint in the glue layer.

    De-hardcode range in RAM we search for the API signature. Instead use the stack
    pointer as a hint to narrow down the range in which the signature could reside
    (it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
    from stack area). Adjust PowerPC code in API demo to the new scheme.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Signed-off-by: Rafal Jaworowski <raj@semihalf.com>

commit 86b4bafdfaf669ede8fd99044abc7e27ea29b4f5
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Feb 17 10:26:38 2009 +0100

    TQM8260: fix locations of kernel and ramdisk images in flash

    After introducing redundant environment the kernel images was
    overlapping with environment.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Feb 11 19:26:15 2009 +0100

    83xx: add missing TIMING_CFG1_CASLAT_* defines

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5
Author: Valeriy Glushkov <gvv@lstec.com>
Date:	Thu Feb 5 14:35:21 2009 +0200

    mpc8349itx: allow SATA boot from the onboard SIL1334

    This patch allows using of SATA devices connected
    to the onboard PCI SIL1334 SATA controller.

    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit e1ac387f4645499746856adc1aeaa9787da2eca6
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:50:14 2008 -0500

    83xx: Add eSDHC support on 8379 EMDS board

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 80522dc8369a89938369fbcee572e662373bc9a3
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:51:33 2008 -0500

    85xx: Add eSDHC support for 8536 DS

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 50586ef24ed5caf6ce5591df76f355009da2cd79
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:47:16 2008 -0500

    Add support for the Freescale eSDHC found on 8379 and 8536 SoCs

    This uses the new MMC framework

    Some contributions by Dave Liu <daveliu@freescale.com>

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 272cc70b211e945e4413122aa73868f6ada732a5
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:41:01 2008 -0500

    Add MMC Framework

    Here's a new framework (based roughly off the linux one) for managing
    MMC controllers.  It handles all of the standard SD/MMC transactions,
    leaving the host drivers to implement only what is necessary to
    deal with their specific hardware.

    This also hooks the infrastructure into the PowerPC board code
    (similar to how the ethernet infrastructure now hooks in)

    Some of this code was contributed by Dave Liu <daveliu@freescale.com>

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 1de97f9856f697380cc504126ab92561ed238803
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:31:39 2008 -0500

    Eliminated arch-specific mmc header requirement

    The current MMC infrastructure relies on the existence of an
    arch-specific header file.	This isn't necessary, and a couple
    drivers were forced to implement dummy files to meet this requirement.
    Instead, we move the stuff in those header files into a more appropriate
    place, and eliminate the stubs and the #include of asm/arch/mmc.h

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit abb5466ccf4ce50f412d459586f4f4b81cb73ac3
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:21:00 2008 -0500

    Convert mmc_init to mmc_legacy_init

    This is to get it out of the way of incoming MMC framework

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit b2e2ed0233a5ef299361abec4fbdaefb63456eff
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 16:19:25 2008 -0500

    Eliminate support for using MMC as memory

    MMC cards are not memory, so we stop treating them that way.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit e1be0d25ecf494ae81245ca438738ba839d6329b
Author: Poonam_Aggrwal-b10812 <b10812@freescale.com>
Date:	Sun Jan 4 08:46:38 2009 +0530

    32bit BUg fix for DDR2 on 8572

    This errata fix is required for 32 bit DDR2 controller on 8572.
    May  also be required for P10XX20XX platforms

    Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>

commit e0c4fac79d4d74572ddd43f75e7189cecca8d0ad
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Feb 16 09:40:20 2009 -0600

    TQM85xx: Fix a couple warnings in TQM8548 build

    The ecm variable in sdram.c was being declared for all 8548, but only
    used by specific 8548 boards, so we make that variable require those
    specific boards, too

    The nand code was using an index "i" into a table, and then re-using "i"
    to set addresses for each upm.  However, then it relied on the old value
    of i still being there to enable things.  Changed the second "i" to "j"

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit cf07a5baece0ecfc5284cfda8a4e68eaf92782f8
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:26 2009 +0100

    MPC85xx: TQM8548: workaround for erratum DDR 19 and 20

    This patch adds the workaround for erratum DDR20 according to MPC8548
    Device Errata document, Rev. 1: "CKE signal may not function correctly
    after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
    processor version 2.1 and the work-around must be removed.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 080408fdc71706adcb883d22125637c54f6010b1
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:25 2009 +0100

    MPC85xx: TQM8548: use cache for AG and BE variants

    This patch makes accesses to the system memory cachable by removing the
    caching-inhibited and guarded flags from the relevant TLB entries for
    the TQM8548_BE and TQM8548_AG modules. FYI, the Freescale MPC85* boards
    are configured similarly.

    This results in a big averall performace improvement. TFTP downloads,
    NAND Flash accesses, kernel boots, etc. are much faster.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit dc5f55d636d7bf21ba17758fac4b929ec4c059f2
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:24 2009 +0100

    MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration

    This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
    module.

    Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 88b0e88d186479349e5a2b771e82775109e10fb4
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:23 2009 +0100

    MPC85xx: TQM8548: fix SDRAM timing for 533 MHz

    According to new TQM8548 timing specification:
    Refresh Recovery: 34 -> 53 clocks
    CKE pulse width:  1 -> 3 cycles
    Window for four activities: 13 -> 14 cycles

    Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit a865bcdac89278cac4dfc07dec8299403110499d
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:22 2009 +0100

    MPC85xx: TQM8548: add support for the TQM8548_AG module

    The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
    CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
    with "$ make TQM8548_AG_config".

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit ad7ee5d43b0db94079d56521dabca25674f28747
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:21 2009 +0100

    MPC85xx: TQM8548: add support for the TQM8548_BE module

    The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
    interface. With NAND support, the image is significantly larger and
    TEXT_BASE is adjusted accordingly. U-Boot can be built for this
    module with "$ make TQM8548_BE_config".

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit a318234878c346e673b2ef8dc4b14b338fe7fc2b
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:20 2009 +0100

    MPC85xx: TQM85xx: make standard PCI/PCI-X configurable

    The TQM8548_AG module does not have the standard PCI/PCI-X interface
    connected but just the PCI Express interface . So far it was not
    possible to disable it without disabling the complete PCI interface
    (CONFIG_PCI) including PCI Express.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 31ca9119c3186cec579b54d2a7a2b361b4d2b7bf
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Feb 11 18:38:19 2009 +0100

    MPC85xx: TQM85xx: fix flash protection for boot loader

    As the reset vector is located at 0xfffffffc, all flash sectors from the
    beginning of the U-Boot binary to 0xffffffff must be protected. On the
    TQM8548-AG having small sectors at the end of the flash it happened that
    the last two sector were not protected and an "erase all" left an
    un-bootable system behind:

    Bank # 2: CFI conformant FLASH (32 x 16)  Size: 32 MB in 270 Sectors
      AMD Standard command set, Manufacturer ID: 0xEC, Device ID: 0x257E
      Erase timeout: 8192 ms, write timeout: 1 ms

      FFFA0000 E RO   FFFC0000	 RO   FFFE0000	 RO   FFFE4000	 RO   FFFE8000	 RO
      FFFEC000	 RO   FFFF0000	 RO   FFFF4000	 RO   FFFF8000 E      FFFFC000

    The same bug seems to be in drivers/mtd/cfi_flash.c:flash_init() and many
    board BSPs as well.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit a1c8a719262151f97119e76166043ee3da3f97b2
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Feb 6 14:30:40 2009 -0600

    86xx: Update CPU info output on bootup

    - Update style of 86xx CPU information on boot to more closely
      match 85xx boards
    - Fix detection of 8641/8641D
    - Use strmhz() to display frequencies
    - Display L1 information
    - Display L2 cache size
    - Fixed CPU/SVR version output

    == Before ==
    Freescale PowerPC
    CPU:
	Core: E600 Core 0, Version: 0.2, (0x80040202)
	System: Unknown, Version: 2.1, (0x80900121)
	Clocks: CPU:1066 MHz, MPX: 533 MHz, DDR: 266 MHz, LBC: 133 MHz
	L2: Enabled
    Board: X-ES XPedite5170 3U VPX SBC

    == After ==
    CPU:   8641D, Version: 2.1, (0x80900121)
    Core:  E600 Core 0, Version: 2.2, (0x80040202)
    Clock Configuration:
	   CPU:1066.667 MHz, MPX:533.333 MHz
	   DDR:266.667 MHz (533.333 MT/s data rate), LBC:133.333 MHz
    L1:    D-cache 32 KB enabled
	   I-cache 32 KB enabled
    L2:    512 KB enabled
    Board: X-ES XPedite5170 3U VPX SBC

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 22c00f8d7d454d77e759df58415d2d3f3d7e154c
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Thu Feb 5 11:25:24 2009 -0600

    86xx: Update Global Utilities structure

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 4ef630df773e45806d701bf5d25c328778bb4cde
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Thu Feb 5 11:25:25 2009 -0600

    86xx: Reset update

    Update the 86xx reset sequence to try executing a board-specific reset
    function.  If the board-specific reset is not implemented or does not
    succeed, then assert #HRESET_REQ.  Using #HRESET_REQ is a more standard
    reset procedure than the previous method and allows all board
    peripherals to be reset if needed.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit edf0e2524a8c6a3e91c009c496a0aa0ae89cd8ab
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Feb 10 23:53:40 2009 -0600

    fsl-ddr: Allow system to boot if we have more than 4G of memory

    Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report
    an error and hang.	Instead of doing that since DDR is mapped in the
    lowest priority LAWs we setup the DDR controller and the max amount
    of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED)

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 8d949aff38cfb4388cbd73876e77bcd06d601f20
Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Date:	Wed Jan 21 17:17:33 2009 -0600

    mpc85xx: Add support for the P2020

    Added various p2020 processor specific details:
    * SVR for p2020, p2020E
    * immap updates for LAWs and DDR on p2020
    * LAW defines related to p2020

    Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
    Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit cb69e4de8702e108324e1c40363f30ef6f2e2918
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Feb 10 17:36:15 2009 -0600

    85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS

    Added some info that is printed out when we boot to distiquish if we
    built MPC8572DS_config vs MPC8572DS_36BIT_config since they have
    different address maps.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit feede8b07013b33fca8dd2a916b3ac86bf4d4c0a
Author: Andy Fleming <afleming@freescale.com>
Date:	Fri Dec 5 20:10:22 2008 -0600

    Fixup SGMII PHY ids in the device tree

    The device tree's PHY addresses need to be fixed up if we're using the
    SGMII Riser Card.

    The 8572, 8536, and 8544 DS boards were modified to call this function.

    Code idea taken from Liu Yu <yu.liu@freescale.com>

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 5dc0cf68f8f101042997d75188081d8526d705ea
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Feb 11 15:10:31 2009 -0600

    Make some minor whitespace changes to eliminate line-wrapping

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 9e56986a2b74d197f51eca70fad7b836b1900c4d
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Feb 11 15:07:24 2009 -0600

    Add eth_get_dev_by_index

    This allows code to iterate through the ethernet devices

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit b67305120aaf268a6140125346678166d14f1f47
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Feb 9 22:03:04 2009 -0600

    85xx: Fix bug in device tree setup in 36-bit physical confg

    In the 36-bit physical config for MPC8572DS when need the start address
    of memory and it size to be kept in phys_*_t instead of a ulong since
    we support >4G of memory in the config and ulong cant represent that.
    Otherwise we end up seeing the memory node in the device tree reporting
    back we have memory starting @ 0 and of size 0.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ad97dce18445ff05bf326094e691a01aa95aa8dc
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Feb 9 22:03:05 2009 -0600

    85xx: Fix address map for 36-bit config of MPC8572DS

    When we introduced the 36-bit config of the MPC8572DS board we had the
    wrong PCI MEM bus address map.  Additionally, the change to the address
    map exposes a small issue in our dummy read on the ULI bus.  We need
    to use the new mapping functions to handle that read properly in the
    36-bit config.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f8523cb0815b2d3d2d780b7d49ca614105555f58
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 6 09:56:35 2009 -0600

    85xx: Fix how we map DDR memory

    Previously we only allowed power-of-two memory sizes and didnt
    handle >2G of memory.  Now we will map up to CONFIG_MAX_MEM_MAPPED
    and should properly handle any size that we can make in the TLBs
    we have available to us

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 6 09:56:34 2009 -0600

    fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller

    If we only have one controller we can completely ignore how
    memctl_intlv_ctl is set.  Otherwise other levels of code get confused
    and think we have twice as much memory.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b29dee3c906e9daaf6baf7772d2e15e26b8636b8
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 4 09:35:57 2009 -0600

    85xx: Format cpu freq printing to handle 8 cores

    Only print 4 cpu freq per line.  This way when we have 8 cores its a
    bit more readable.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9704f9caf53f5cae547d8c5e1ae94aa4e57b160f
Author: Abraham, Thomas <t-abraham@ti.com>
Date:	Tue Oct 28 16:51:31 2008 +0530

    USB: Remove LUN number from CDB

    The LUN number is not part of the Command Descriptor Block (CDB) for scsi inquiry, request sense, test unit ready, read capacity and read10 commands. This patch removes the LUN number information from the CDB.

    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit f3c0de636252f3a18654c8f9c6370a9574a7e755
Author: Atin Malaviya <atin.malaviya@gmail.com>
Date:	Tue Feb 3 15:17:10 2009 -0500

    Added usbtty_configured() check. Fixed attribute(packed) warnings.

    V3: Fixed line-wrap problem due to user error in mail!

    Added usb_configured() checks in usbtty_puts() and usbtty_putc() to get around a hang
    when usb is not connected and the user has set up multi-io (setenv stdout serial,usbtty etc).
    Got rid of redundant __attribute__((packed)) directives that were causing warnings from gcc.

    Signed-off-by: Atin Malaviya <atin.malaviya@gmail.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit e7de18afe8ecf96a51ef981d06066eeb6b1254e7
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Fri Feb 13 09:23:36 2009 +0100

    i.MX31: Start the I2C clock on driver initialisation

    i.MX31 powers on with most clocks running, so, after a power on this explicit
    clock start up is not required. However, as Linux boots it disables most clocks
    to save power. This includes the I2C clock. If we then soft reboot from Linux
    the I2C clock stays off. This breaks the phycore, which has its environment in
    I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver
    initialisation routine.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Ack-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 15208ac9eae1c340c4bc11f70cbf5c9da78a57ba
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Feb 11 20:36:14 2009 -0500

    i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts

    The Blackfin i2c driver has been rewritten thus the special ifdefs in the
    common code are no longer needed.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c2d9befa0b4695b89476fb5d259742c09afe243f
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Feb 12 08:08:54 2009 +0100

    82xx, mgcoge: fix compile error

    With actual u-boot compiling the mgcoge port fails, because
    since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is
    necessary to define CONFIG_NET_MULTI.

    Seems to me the mgcoge port is the only actual existing 8260
    port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed
    to be fixed.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 9cacf4fc4035eabe9d9ae2a9a188c51a8027c91e
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Mon Feb 9 08:18:34 2009 +0100

    ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7369f0e384e2a831be13a7773a58242c9173fa9c
Author: Carolyn Smith <carolyn.smith@tektronix.com>
Date:	Thu Feb 12 06:13:44 2009 +0100

    ppc4xx: Fix initialization of the SDRAM_CODT register

    This fixes the initialization of the SDRAM_CODT register in the ppc4xx DDR2
    initialization code. It also removes use of the SDRAM_CODT_FEEDBACK_RCV_SINGLE_END
    and SDRAM_CODT_FEEDBACK_DRV_SINGLE_END #define's since they are reserved bits.

    Signed-off-by: Carolyn Smith <carolyn.smith@tektronix.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit cef0efaf2fa55d1f25066cfb02bd984c27f9ca31
Author: Stefan Roese <sr@denx.de>
Date:	Wed Feb 11 09:29:33 2009 +0100

    ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards

    Some AMCC eval boards do have a board_eth_init() function calling
    pci_eth_init(). These boards need to call cpu_eth_init() explicitly now
    with the new eth_init rework.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c645012aefebb301e6907d148c6c8efacac049d4
Author: Adam Graham <agraham@amcc.com>
Date:	Mon Feb 9 13:18:12 2009 -0800

    ppc4xx: Autocalibration can set RDCC to over aggressive value.

    The criteria of the AMCC SDRAM Controller DDR autocalibration
    U-Boot code is to pick the largest passing write/read/compare
    window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
    Cycle Select value.

    On some Kilauea boards the DDR autocalibration algorithm can
    find a large passing write/read/compare window with a small
    SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
    value "T1 Sample".

    This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
    "T1 Sample" proves to be to aggressive when later on U-Boot
    relocates into DDR memory and executes.

    The memory traces on the Kilauea board are short so on some
    Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
    value of "T1 Sample" shows up as a potentially valid value for
    the DDR autocalibratiion algorithm.

    The fix is to define a weak default function which provides
    the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
    to accept for DDR autocalibration.	The default will be the
    "T2 Sample" value.	A board developer who has a well defined
    board and chooses to be more aggressive can always provide
    their own board specific string function with the more
    aggressive "T1 Sample" value or stick with the default
    minimum SDRAM_RDCC.[RDSS] value of "T2".

    Also put in a autocalibration loop fix for case where current
    write/read/compare passing window size is the same as a prior
    window size, then in this case choose the write/read/compare
    result that has the associated smallest RDCC T-Sample value.

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2ede879fcb67470524847bb4fc8972651bb46184
Author: Stefan Roese <sr@denx.de>
Date:	Wed Feb 11 09:37:12 2009 +0100

    ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h

    CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
    included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.

    It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
    boards right now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f15c6515fc23f83c51f3de272ca23d86b80e81b1
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Feb 12 00:08:39 2009 +0100

    Coding style cleanup; update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Jan 30 16:36:40 2009 -0600

    Add feature-removal-schedule.txt

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 255d28e1642e8fc32a6753226be1a96b481ce111
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 10 09:32:38 2009 +0100

    8xx serial, smc: Coding-Style cleanup serial SMC driver

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 10 09:31:47 2009 +0100

    8xx serial, smc: add configurable SMC Rx buffer len

    This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
    With this option it is possible to allow the receive
    buffer for the SMC on 8xx to be greater then 1. In case
    CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
    old version.

    When defining CONFIG_SYS_SMC_RXBUFLEN also
    CONFIG_SYS_MAXIDLE must be defined to setup the maximum
    idle timeout for the SMC.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit e915f8bb73d74178bc21d3a457959883b1afd1c0
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Feb 5 21:04:36 2009 -0500

    common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile

    Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
    the COBJS-$(CONFIG_xxx) in the Makefile.  Also delete unused var in kgdb
    code in the process.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit ab76e9848a1f4db64d14233741d739a3b3360c93
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Feb 5 21:04:50 2009 -0500

    bzip2: move ifdef handling to Makefile COBJS-$(...)

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date:	Thu Feb 5 22:18:02 2009 -0500

    Fix whitespace damage: double space changed to a tab

    At some point an intentional double space at the end of the sentence
    got changed into a tab in the GPL header line:
     * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    This patch fixes the damage.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 4f975678de995b55749d5e84590c268972a7c835
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Feb 10 09:53:29 2009 +0100

    cfi: make flash_get_info() non static

    If on your board is more than one flash, you must know
    the size of every single flash, for example, for updating
    the DTS before booting Linux. So make this function
    flash_get_info() extern, and you can have all info
    about your flashes.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Thu Feb 5 23:58:25 2009 -0800

    net: removed board-specific CONFIGs from MPC5xxx FEC driver

    Added new CONFIG options for the three type of MAC-PHY interconnect and
    applied them all relevant board config files

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 638ed3e296e70fab286d157b7adedaaa4a09a474
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Feb 5 21:04:47 2009 -0500

    net/sntp.c: move ifdef into Makefile COBJS-$(...)

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
Author: Andy Fleming <afleming@freescale.com>
Date:	Tue Feb 3 18:26:41 2009 -0600

    tsec: Fix a bug in soft-resetting

    SOFT_RESET must be asserted for at least 3 TX clocks.  Usually, that's about 30
    clock cycles, so it's been mostly working.	But we had no guarantee, and at
    slower bitrates, it's just over a microsecond (over 1000 clock cycles).  This
    enforces a 2 microsecond gap between assertion and deassertion.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
Author: Simon Munton <simon@nidoran.m5data.com>
Date:	Mon Feb 2 09:44:08 2009 +0000

    Fix 100Mbs ethernet operation on sh7763 based boards

    100Mbs ethernet does not work on sh7763 chips due to the wrong value being
    used in the GECMR register. Following diff fixes the problem

    Signed-off-by: Simon Munton	<simon@nidoran.m5data.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
Author: ksi@koi8.net <ksi@koi8.net>
Date:	Fri Feb 6 16:27:55 2009 -0800

    Fix MPC8260 with ethernet on SCC

    This fixes MPC8260 compilation with ethernet on SCC. Probably was a
    typo or something...

    Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Jan 30 12:56:15 2009 +0100

    82xx serial, smc: Coding-Style cleanup serial SMC driver

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Jan 30 12:55:38 2009 +0100

    82xx serial, smc: add configurable SMC Rx buffer len

    This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
    With this option it is possible to allow the receive
    buffer for the SMC on 82xx to be greater then 1. In case
    CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
    old version.

    When defining CONFIG_SYS_SMC_RXBUFLEN also
    CONFIG_SYS_MAXIDLE must be defined to setup the maximum
    idle timeout for the SMC.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 6 08:08:06 2009 -0600

    ppc: Fix roll over bug in flush_cache()

    If we call flush_cache(0xfffff000, 0x1000) it would never
    terminate the loop since end = 0xffffffff and we'd roll over
    our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 87c9063963561d3d01064be34d0c30855a56587b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Feb 5 20:40:58 2009 -0600

    ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h

    Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
    between the two current users (lib_ppc/board.c, 44x SPD DDR2).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Stefan Roese <sr@denx.de>

commit 47d41cc3a11a03c6d56146d056145df73f47eb50
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Feb 5 20:40:57 2009 -0600

    Add an architecture specific config.h for common defines

    We have common defines that we duplicate in various ways.  Having an
    arch specific config.h gives us a common location for those defines.

    Eventually we should be able to replace this when we have proper
    Kconfig support.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:56 2009 -0600

    mpc8641hpcn: Change PCI MEM pci bus address

    Now that the rest of u-boot can support it, change the PCI bus
    address of the PCI MEM regions from 0x80000000 to 0xc0000000,
    and use the same bus address for both PCI1 and PCI2.  This will
    maximize the amount of PCI address space left over to map RAM
    on systems with large amounts of memory.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 1785dbeed43599eed1d8875673c96912cd770141
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:55 2009 -0600

    drivers/block/ahci: Fix pci mapping bug

    The code assumes that the pci bus address and the virtual
    address used to access a region are the same, but they might
    not be.  Fix this assumption.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:54 2009 -0600

    MPC8641HPCN: Enable CONFIG_ADDR_MAP

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:53 2009 -0600

    mpc8641hpcn: Clean up PCI mapping concepts

    Clean up PCI mapping concepts in the 8641 config - rename _BASE
    to _BUS, as it's actually a PCI bus address, separate virtual
    and physical addresses into _VIRT and _PHYS, and use each
    appopriately.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit c9315e6b4f244981de0b2eaaa29a7838a165b494
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:52 2009 -0600

    mpc86xx: Add support to populate addr map based on BATs

    If CONFIG_ADDR_MAP is enabled, update the address map
    whenever we write a bat.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:51 2009 -0600

    powerpc: Move duplicated BAT defines to mmu.h

    The BAT fields are architected; there's no need for these to be in
    cpu-specific files.  Drop the duplication and move these to
    include/asm-ppc/mmu.h.  Also, remove the BL_xxx defines that were only
    used by the alaska board, and switch to using the BATU_BL_xxx defines
    used by all the other boards.  The BL_ defines previously in use
    had to be shifted into the proper position for use, which was inefficient.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 6e61fae4d360a1380b63e7d007b31477e366bcce
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:50 2009 -0600

    drivers/pci: Create pci_map_bar function

    It is no longer always true that the pci bus address can be
    used as the virtual address for pci accesses.  pci_map_bar()
    is created to return the virtual address for a pci region.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 2ecca3401775b125c3b9ff65766befb23989414b
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Tue Feb 3 18:10:49 2009 -0600

    mpc8641hpcn: Set up outbound pci windows before inbound

    Because the inbound pci windows are mapped generously, set up
    the more specific outbound windows first.  This way, when we
    search the pci regions for something, we will hit on the more
    specific region.  This can actually be a problem on systems
    with large amounts of RAM.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit b81b773ead0687114dc8a800f99ea6e504447739
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Mon Feb 2 16:34:52 2009 -0600

    mpc8641hpcn: Use physical address in flash banks defintion

    If the VA and PA of the flash aren't the same, the banks list
    should be initialized to hold the physical address.  Correct this.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 0d19f6c8cbe71b9e6d8c6bd6742ed2551e918870
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Tue Feb 10 00:22:31 2009 +0100

    qong: support for Dave/DENX QongEVB-LITE board

    This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 62cbc408f52fc9a5eb849e0b882c504780c9d183
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Mon Feb 9 18:45:28 2009 +0100

    dnet: driver for Dave DNET ethernet controller

    Driver for Dave DNET ethernet controller (used on Dave/DENX
    QongEVB-LITE board).

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 6 09:49:32 2009 -0600

    pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching

    When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
    we should give preference to memory regions that aren't system memory.

    Its possible that we have over mapped system memory in the regions and
    we want to avoid depending on the order of the regions.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 6 09:49:31 2009 -0600

    pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity

    The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
    can be confusing when reading the code.

    Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
    for system memory mapping purposes.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 54dc517328709c204a9cbf7a253d9f8e6c4b26ec
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Sun Feb 8 00:59:43 2009 +0300

    mx31: add GPIO registers definitions

    Added definitions for i.MX31 processor GPIO registers.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 8da601280a8acbc3385784780ed35130e53812f1
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Feb 4 13:47:22 2009 -0600

    NAND: Add timeout for reset command

    Without the timeout present an infinite loop can occur if the
    NAND device is broken or not present.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Feb 4 13:39:40 2009 -0600

    NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST

    Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
    for disabling the "No NAND device found!!!" warning when
    CONFIG_SYS_NAND_QUIET_TEST was defined.  This re-adds support
    for silencing the warning.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
Author: Valeriy Glushkov <gvv@lstec.com>
Date:	Mon Jan 19 16:32:59 2009 +0200

    NAND: Fixed invalid pointers to static relocated chip names

    Dear Wolfgang,

    You are right, the patch was ugly.
    The new one seems to be better.

    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit e7deec1bf6fa3b3a21cd8d14fe2a909a42efc9d8
Author: Nishanth Menon <nm@ti.com>
Date:	Mon Feb 2 18:20:12 2009 -0600

    ARM:OMAP3:Zoom1: Add nand unlock option

    Enable NAND_UNLOCK option for unlocking nand for
    erase/write operations

    Signed-off-by: Nishanth Menon <nm@ti.com>

commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
Author: derek@siconix.com <derek@siconix.com>
Date:	Mon Jan 26 14:08:17 2009 -0700

    env_nand: fix env memory release

    This fixes a bug that tmp environment memory not being released.

    Signed-off-by: Derek Ou <dou@siconix.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 05fd88776419df59e7f37bac063a209409dd801d
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Fri Feb 6 10:37:45 2009 +0100

    ARM: remove unused variable

    The "size" variable in start_armboot() in lib_arm/board.c is only really
    used in "#ifndef CONFIG_SYS_NO_FLASH" case, and even there it can be
    eliminated (thanks to Jean-Christophe PLAGNIOL-VILLARD for a suggestion.)

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 6989e4f546d960a407dd5425f800dff9751c8132
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Thu Feb 5 09:33:50 2009 -0500

    Coldfire: M527x: Add missing GPIO register address defines

    Add missing GPIO registers address definition for Coldfire M5271.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Jan 23 14:42:58 2009 -0500

    Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command

    Modified mii_init to support boards with PHYs that are not set to
    autonegotiate, but still want to use u-boot's mii commands to probe
    the smi bus. Such PHYs will not set the Autonegotiate-done bit.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Jan 23 11:44:30 2009 -0500

    Coldfire: Applied baudrate formula of serial_init to serial_setbrg

    Applied the patch for baudrate divider value truncation for
    serial_init to serial_setbrg as well.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Jan 23 14:07:05 2009 -0500

    Coldfire: M5271EVB: Board header update (dependencies)

    Cleanup for M5271EVB:
    Added clarification on the use of CONFIG_SYS_CLOCK.
    Modified to use u-boot's HUSH parser.
    Cleanup on environment settings.
    Removed compiler warning by defining CONFIG_SYS_CS0_*

    Dependencies:
    Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
    This depends on a patch to include/asm-m68k/m5271.h
    that defines the multiplier and divider ratios.

    Removed the definition of CONFIG_SYS_FECI2C.
    This depends on a patch that removes the use of it in
    cpu/mcf52x2/cpu_init.c

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit e0db344fabfeb4f9649846f94838f51172f6a1f6
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Thu Jan 29 14:36:06 2009 -0500

    Coldfire: M5271: Allow board header file to specify clock multiplier

    M5271 dynamic clock multiplier. It is currently fixed at 100MHz.

    Allow the board header file to set their own multiplier and divider.
    Added the #define for the multiplier and divider to the cpu header file.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Jan 23 10:47:13 2009 -0500

    Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C

    Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
    Use read-modify-write to activate the FEC pins without disabling I2C.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit ee73cc59ab904976af3c33b454fc84f78618b2d1
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Jan 23 09:45:34 2009 -0500

    Coldfire: cmd_bdinfo cleanup

    CONFIG_M68K bdinfo cleanup:

    Fixed compiler warning about baudrate printing.
    format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.

    Added printing of "cpufreq"

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Fri Jan 23 09:27:00 2009 -0500

    Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list

    Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
    was causing the bus clock (not CPU clock) to be declared twice as
    fast as it actually is. This causes UARTS to operate at half the
    specified baudrate.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit 59d1bda7f92c8a28c3aba94e48063749d425949f
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Tue Feb 3 15:15:21 2009 +0100

    ppc4xx: Make PCIE support selectable

    On some platforms PCIE support is not required, but would be included
    because the cpu supports it. To reduce fooprint it is now configurable
    via CONFIG_PCI_DISABLE_PCIE.

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b129eff5ede394cc1faeb6dbf6a987e91abce552
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Feb 3 22:13:16 2009 +0100

    ppc4xx: Only fixup opb attached UARTs

    This patch updates the fdt UART clock fixup code to
    only touch CPU internal UARTs on 4xx systems.
    Only these UARTs are definitely clocked by gd->uart_clk.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Jan 13 11:00:29 2009 -0500

    Blackfin: move default boot SPI CS to common code

    Move the default SPI CS that we boot from into common code so that it can
    be used in other SPI drivers and environment settings.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Dec 10 12:33:54 2008 -0500

    Blackfin: dynamically update UART speed when initializing

    Previously, booting over the UART required the baud rate to be known ahead
    of time.  Using a bit of tricky simple math, we can calculate the new board
    rate based on the old divisors.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>

commit 97f265f14f23050f3cb997f617f3a6917b843ea2
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Dec 9 17:21:08 2008 -0500

    Blackfin: add support for fast SPI reads with Boot ROM

    Newer Blackfin boot roms support using the fast SPI read command rather than
    just the slow one.	If the functionality is available, then use it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 67619982bfc5cd62710a48e3cbffc304cb78c341
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:46:52 2008 -0400

    Blackfin: check for reserved settings in DDR MMRs

    Some bits of the DDR MMRs should not be set.  If they do, bad things may
    happen (like random failures or hardware destruction).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:54:00 2008 -0400

    Blackfin: set default voltage levels for BF538/BF539 parts

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Jun 1 01:29:57 2008 -0400

    Blackfin: use on-chip syscontrol() rom function when available

    Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
    to be used to properly program the memory and voltage settings as it will
    include (possibly critical) factory tested bias values.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
Author: Stefan Roese <sr@denx.de>
Date:	Thu Feb 5 11:44:52 2009 +0100

    cfi_flash: Fix typo in cfi_flash.c

    Patch "flash/cfi_flash: Use virtual sector start address, not phys"
    introduced a small typo and compilation warning for systems with CFI
    legacy support (e.g. hcu4). This patch fixes it.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 28745db969b72693754991c838f68a7fb4a8b1ab
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 29 11:21:38 2009 +0100

    jedec_flash: Only use manufacturer defines from common flash.h

    This patch removes the double defined manufacturer defines from
    jedec_flash.c. Since the common defines in flash.h are 32bit
    we now need the (16) cast. This patch also removes the compilation
    warning (e.g. seen on hcu5):

    ./MAKEALL hcu5
    Configuring for hcu5 board...
    jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
Author: Stefan Roese <sr@denx.de>
Date:	Thu Feb 5 11:25:57 2009 +0100

    cfi_flash: Silence compilation warning

    Patch "flash/cfi_flash: Use virtual sector start address, not phys"
    introduced a small compilation warning. This patch fixes it.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Mon Feb 2 16:34:51 2009 -0600

    flash/cfi_flash: Use virtual sector start address, not phys

    include/flash.h was commented to say that the address in
    flash_info->start was a physical address.  However, from u-boot's
    point of view, and looking at most flash code, it makes more
    sense for this to be a virtual address.  So I corrected the
    comment to indicate that this was a virtual address.

    The only flash driver that was actually treating the address
    as physical was the mtd/cfi_flash driver.  However, this code
    was using it inconsistently as it actually directly dereferenced
    the "start" element, while it used map_physmem to get a
    virtual address in other places.  I changed this driver so
    that the code which initializes the info->start field calls
    map_physmem to get a virtual address, eliminating the need for
    further map_physmem calls.	The code is now consistent.

    The *only* place a physical address should be used is when defining the
    flash banks list that is used to initialize the flash_info struct,
    usually found in the board config file.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Feb 4 09:42:20 2009 +0100

    Fix compiler warning

    (shows up only when DEBUG is enabled)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:45:55 2008 -0400

    Blackfin: update anomaly lists

    Update the anomaly lists to match latest anomaly sheets.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
Author: Ralph Kondziella <rk@argos-messtechnik.de>
Date:	Mon Jan 26 12:34:36 2009 -0700

    ADS5121 Add PATA support

    Original patch from Ralph Kondziella
    plus clean up by Wolfgang Denk
    plus changes by John Rigby
	use ips clock not lpc
	port forward to current u-boot release

    Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: John Rigby <jrigby@freescale.com>

commit abfbd0ae4967df18102345db4f4b529a13da107b
Author: Martha Marx <mmarx@silicontkx.com>
Date:	Mon Jan 26 10:45:07 2009 -0700

    ADS5121 Add IC Ident Module (IIM) support

    IIM (IC Identification Module) is the fusebox for the mpc5121.
    Use #define CONFIG_IIM to turn on the clock for this module
    use #define CONFIG_CMD_FUSE to add fusebox commands.
    Fusebox commands include the ability to read
    the status, read the register cache, override the register cache,
    program the fuses and sense them.

    Signed-off-by: Martha Marx <mmarx@silicontkx.com>
    Signed-off-by: John Rigby <jrigby@freescale.com>

commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
Author: John Rigby <jrigby@freescale.com>
Date:	Fri Jan 23 10:33:15 2009 -0700

    ADS5121 Fix rev2 silicon pci iopad config

    Reset config is not correct

    Signed-off-by: John Rigby <jrigby@freescale.com>

commit 4c154252c480b13f69ce1b71a9530b0515da76a6
Author: John Rigby <jrigby@freescale.com>
Date:	Wed Nov 19 13:57:34 2008 -0700

    ADS5121 DIU Add diu_bmp_addr env

    Add support for using a bmp other than
    FSL_Logo_BMP for the DIU splash screen.

    Can now set the env var "diu_bmp_addr" to
    the address of a BMP in flash to use instead
    of the default FSL_Logo_BMP.

    Signed-off-by: Martha Marx <mmarx@silicontkx.com>
    Signed-off-by: John Rigby <jrigby@freescale.com>

commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
Author: John Rigby <jrigby@freescale.com>
Date:	Thu Oct 30 16:39:35 2008 -0600

    ADS5121 DIU Make inclusion of FSL logo optional

    Make inclusion of FSL logo optional and
    turn it off by default.

    Signed-off-by: John Rigby <jrigby@freescale.com>

commit bd99ec149abe94e7f6b2bda4766d701b4005053f
Author: Remy Bohmer <linux@bohmer.net>
Date:	Sun Feb 1 12:27:53 2009 +0100

    Compile warning fix in onenand_uboot.h

    Regression since merge window after 2009.01

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit a270d1e7295c3d829f42c0480117941dfc1c6477
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 29 06:33:55 2009 +0100

    USB: Add EHCI support for VCT EHCI controller (really with driver now)

    Somehow I missed the real driver part in my last patch version. This patch
    now adds the driver.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
Author: Cliff Cai <cliff.cai@analog.com>
Date:	Sat Nov 29 18:22:38 2008 -0500

    Blackfin: add driver for on-chip MMC/SD controller

    This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.

    Signed-off-by: Cliff Cai <cliff.cai@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 22:47:34 2008 -0400

    Blackfin: add port muxing for BF51x SPI

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit fc68f9f85959664d528daea2aef5ef54974331ce
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Jan 6 06:16:19 2009 -0500

    Blackfin: output booting source when booting

    Knowing the booting source of the part is useful, especially when the part
    can switch dynamically between sources.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8df3ce0f49c37947800ac7c84e751499882619fc
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Dec 11 06:30:46 2008 -0500

    Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom

    Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
    the Blackfin on-chip bootrom to boot out of SPI flash.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2b4a486e6fac502d8b883e344cc4012283945b3d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Dec 11 04:06:26 2008 -0500

    Blackfin: update asm-blackfin/posix_types.h to latest Linux version

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e5eb93e77391bcc308697116c544ea1340aaae8a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Dec 6 02:54:52 2008 -0500

    Blackfin: add port I bits

    Some people need to access port I, so make sure the pins are defined.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8a6b272596d43de0db4943eac7af58c3534c4026
Author: Sonic Zhang <Sonic.Zhang@analog.com>
Date:	Wed Nov 26 22:16:45 2008 -0500

    Blackfin: add driver for on-chip ATAPI controller

    This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.

    Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 26 21:43:06 2008 -0500

    Blackfin: add driver for on-chip NAND controller

    This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 4148e02abae9a099f4444b5e168ebc2b911d2295
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 12 07:18:15 2008 -0500

    Blackfin: build with -mno-fdpic

    Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
    up u-boot, including ones that output FDPIC ELF by default.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Nov 11 05:43:57 2008 -0500

    Blackfin: fix up EBIU defines

    The EBIU defines for EBSZ 256/512 were incorrect.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 5 12:45:24 2008 -0500

    Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()

    Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
    as usable with the source/destination addresses and the count size.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b93c68648426f906d63b98117496b6415f505f39
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 5 08:50:23 2008 -0500

    Blackfin: only flag L1 instruction for DMA memcpy

    The performance difference from doing an 8 bit DMA memcpy vs an optimized
    core memcpy can be pretty big when you add in the overhead of setting up the
    MDMA registers, cache flushes, etc...  So only use dma_memcpy() when we
    actually require it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 5 07:20:37 2008 -0500

    Blackfin: dma_memcpy(): fix random failures

    We have to make sure the DMA channel is actually disabled in hardware before
    attempting to reprogram it.  Otherwise the new settings are ignored and we
    end up with random hangs/failures.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Nov 4 00:04:03 2008 -0500

    Blackfin: rewrite cache handling functions

    Take the cache flush functions from the kernel as they use hardware loops in
    order to get optimal performance.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Nov 3 22:30:05 2008 -0500

    Blackfin: setup bi_enetaddr for single nets

    For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
    based on $ethaddr, so set it up.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 40599239e7875b39e2a5c12e6545992041c72c52
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Oct 24 22:48:47 2008 -0400

    Blackfin: cache core/system clock values

    Calculating the clocks requires a bit of calls to gcc math functions, so
    cache the values after the first run since they'll most likely never
    change once U-Boot is up and running.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 6957a6209b02f6b69607fc47425f13731cc477f1
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Oct 24 18:18:16 2008 -0400

    Blackfin: enable --gc-sections

    Start building all Blackfin boards with -ffunction-sections/-fdata-sections
    and linking with --gc-sections.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 20 21:08:54 2008 -0400

    Blackfin: dont check baud if it wont actually get used

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 400f5778f375bc99c73c8488c555def261ccfab7
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Oct 14 07:54:09 2008 -0400

    Blackfin: add driver for on-chip SPI controller

    This fills out the SPI backend for the Blackfin on-chip SPI peripheral.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 18 05:33:51 2008 -0400

    Blackfin: only build post code when CONFIG_POST

    Save some time by using CONFIG_POST in the Makefile rather than C files.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Jan 8 11:57:57 2009 -0500

    Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues

    Redo how pointers are managed to get rid of ugly casts and strict pointer
    aliasing issues that are highlighted by gcc 4.3.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Dec 9 17:46:21 2008 -0500

    Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII

    No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
    does exactly the same thing as common "CONFIG_RMII".

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 5 06:36:15 2008 -0500

    Blackfin: bfin_mac: use common debug()

    Rather then defining our own DEBUGF(), just use the common debug().

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 20 13:59:51 2008 -0400

    Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}

    Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
    of 2.5mhz, use these as defaults if the board doesn't specify otherwise.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit ac45af4e63ea925f4accc98453aab1a1166c196d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Oct 14 04:52:00 2008 -0400

    Blackfin: bfin_mac: cleanup MII/PHY functions

    Cleanup and rewrite the MII/PHY related functions so that we can reuse the
    existing common linux/miiphy.h code and hook into the `mii` command.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 6b310a05f0d10c751f22468040932139f71c71d3
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Oct 14 00:31:30 2008 -0400

    Blackfin: bfin_mac: set MDCDIV based on SCLK

    Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
    use the real algorithm so it gets set correctly regardless of SCLK.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 930590f3e49c8f32256edf2e5861e1535a329c6c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 31 09:10:48 2009 +0100

    ixp: move serial to drivers/serial

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f90c8022f448bc5e93090e4b714368e52e912f0f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 31 09:04:58 2009 +0100

    ixp: move pci init in arm/board instead of cpu

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 31 08:56:49 2009 +0100

    ixp: move pci drivers to drivers/pci

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 012d5bab09a534e4800b02f50cf508e6837202ea
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 31 08:53:44 2009 +0100

    ixp: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f693f501d67434df1f815fd1824a71973ae08207
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 31 08:53:44 2009 +0100

    ixp: add missing os define

    need by arm-elf toolchains and no impact on the arm-linux one

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 31 09:53:39 2009 +0100

    ixp: remove the option to include the Microcode

    instead the board will have to load it from flash or ram
    which will be specified by npe_ucode env var

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1b017baf2071d8daf643bce87250db898c606c66
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Jan 30 09:45:23 2009 +0100

    ixp/npe: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Jan 28 21:58:04 2009 +0100

    SX1: add hardware V2 support

    In the V2 the 2 flash has been replace by one 32MB flash

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f877f2233dbcd7417c2f0babe6a849099b167f3c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Jan 28 21:58:03 2009 +0100

    SX1: Fix second flash mapping

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Jan 28 21:58:03 2009 +0100

    SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Jan 28 21:57:59 2009 +0100

    move Samsung's board to board/samsung

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Jan 29 12:07:21 2009 +0100

    move ARM Ltd. to vendor dir

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
Author: Larry Johnson <lrj@acm.org>
Date:	Wed Jan 28 15:30:37 2009 -0500

    ppc4xx: Clean up configuration file for Korat board

    This patch updates the default environmental variables for the
    Korat PPC 440EPx board, and makes additional minor fixes.

    Signed-off-by: Larry Johnson <lrj@acm.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f20405e31680efc36293c59b4963db57c9d93df4
Author: Larry Johnson <lrj@acm.org>
Date:	Wed Jan 28 15:30:02 2009 -0500

    ppc4xx: Add variable "korat_usbcf" for Korat board

    The new environment variable "korat_usbcf" selects the USB
    port used by the Korat board's CompactFlash controller.

    Signed-off-by: Larry Johnson <lrj@acm.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
Author: Gunnar Rangoy <gunnar@rangoy.com>
Date:	Fri Jan 23 12:56:31 2009 +0100

    AVR32: macb - Search for PHY id

    This patch adds support for searching through available PHY-addresses in
    the macb-driver. This is needed for the ATEVK1100 evaluation board,
    where the PHY-address will be initialized to either 1 or 7.

    This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
    enabled tells the driver to search for the PHY address.

    Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
    Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
    Signed-off-by: Olav Morken <olavmrk@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit af8626e0c08a780d9ded1d9c4883a89355f60e75
Author: Olav Morken <olavmrk@gmail.com>
Date:	Fri Jan 23 12:56:26 2009 +0100

    Fix IP alignment problem

    This patch removes volatile from:
    volatile IP_t *ip = (IP_t *)xip;

    Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
    using volatile, which causes an exception since xip isn't aligned on a word
    boundary.

    Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
    Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
    Signed-off-by: Olav Morken <olavmrk@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 12a8b9db12f82a189ff143a58731007f5469da61
Author: Ron Madrid <ron_madrid@sbcglobal.net>
Date:	Wed Jan 28 16:17:21 2009 -0800

    Marvell 88E1118 interrupt fix

    This patch adjusts the LED control so that interrupt lines are not reading LEDs
    and effectively causing indefinite interrupts to the controller.

    Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:14:26 2009 +0100

    net: smc911x.c: Add LAN9211 to chip_ids[] array

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Jan 27 16:53:39 2009 -0500

    Move is_valid_ether_addr() to include/net.h

    Import the is_valid_ether_addr() function from the Linux kernel.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jan 5 12:25:13 2009 +0100

    net: Sort Makefile labels

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jan 28 23:06:42 2009 +0100

    85xx: Fix compile breakage with sbc8540 and sbc8560

    This fixes an error which raises just a warning:
    sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Jan 28 13:48:55 2009 -0500

    SPD823TS: do not define CONFIG_CMD_ENV

    Since the SPD823TS board does not actually have any writable flash to save
    its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
    disabled.

    This fixes the build error:
    common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
    common/cmd_nvedit.c:557: undefined reference to `saveenv'
    make: *** [u-boot] Error 1

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Wed Jan 28 21:40:16 2009 +0100

    OMAP3: Add Zoom1 board support

    Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
    http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit

    Signed-off-by: Nishanth Menon <nm@ti.com>
    Signed-off-by: Jason Kridner <jkridner@beagleboard.org>

commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Wed Jan 28 21:39:58 2009 +0100

    OMAP3: Add Pandora support

    Add Pandora support.

    Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
    Signed-off-by: Jason Kridner <jkridner@beagleboard.org>

commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Wed Jan 28 21:39:58 2009 +0100

    OMAP3: Add EVM board

    Add EVM board support.

    Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
    Signed-off-by: Jason Kridner <jkridner@beagleboard.org>

commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Wed Jan 28 21:39:57 2009 +0100

    OMAP3: Add Overo board

    Add Overo board support.

    Signed-off-by: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
    Signed-off-by: Jason Kridner <jkridner@beagleboard.org>

commit f904cdbb68167c647887f19929ad295dbaac8862
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Tue Jan 27 18:19:12 2009 +0100

    OMAP3: Add common power code, README, and BeagleBoard

    Add BeagleBoard support, common power code and README.

    Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jan 28 08:31:10 2009 -0600

    85xx: Fix compile breakage with MPC8540EVAL

    Configuring for MPC8540EVAL board...
    mpc8540eval.c: In function 'checkboard':
    mpc8540eval.c:53: error: invalid operands to binary /
    make[1]: *** [mpc8540eval.o] Error 1

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
Author: Bryan Wu <bryan.wu@analog.com>
Date:	Sun Jan 18 23:04:27 2009 -0500

    usb_scan_devices: fix output with no devices

    We should check the return of usb_new_device() so that if no USB device is
    found, we print out the right message rather than always saying "new usb
    device found".

    Signed-off-by: Bryan Wu <bryan.wu@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit f1c1f540243438246aefb703fdcf16957e3a72e1
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 22 10:11:21 2009 +0100

    USB: Add high-speed (480Mb/s) to all USB related outputs

    With this patch the USB related connection speed output ("usb tree" command and
    debug output) is now high-speed enabled.

    This patch also fixes a compilation warning when debugging is enabled.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:12:19 2009 +0100

    USB: Add dcache support to the EHCI driver

    This patch adds routines to handle (flush/invalidate) the dcache for the
    QH and qTD structures and data buffers. This is needed on platforms using
    this EHCI support with dcache enabled (like the MIPS VCT board port).

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:12:28 2009 +0100

    USB: Add EHCI support for VCT EHCI controller

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:12:10 2009 +0100

    USB: Add config option to call ehci_hcd_init() again after EHCI reset

    This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
    to call ehci_hcd_init() again after ehci_reset() is executed. This
    is needed for the upcoming VCT EHCI support which needs to re-init
    the hcd part again after the EHCI CMD_RESET is executed.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 597eb28bd9691266b7b804364cda577cdb51d106
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:12:01 2009 +0100

    USB: Fix speed detection on EHCI cntr with root hub transaction translators

    This patch fixes an issue that the speed of USB devices was not detected
    correctly on some EHCI controllers. This will be used on the upcoming VCT
    EHCI support.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
Author: Thomas Abraham <t-abraham@ti.com>
Date:	Sun Jan 4 09:41:20 2009 +0530

    usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform

    Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
    configuration file.

    Signed-off-by: Ravi Babu <ravibabu@ti.com>
    Signed-off-by: Swaminathan S <swami.iyer@ti.com>
    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 538ef967715322f64ee08efa2296d9682111b014
Author: Thomas Abraham <t-abraham@ti.com>
Date:	Sun Jan 4 09:41:16 2009 +0530

    usb : musb : Enabling DM6446 (TI DaVinci) USB module power

    Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
    controller hook up to USB core layer.

    Signed-off-by: Ravi Babu <ravibabu@ti.com>
    Signed-off-by: Swaminathan S <swami.iyer@ti.com>
    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit e142e9f35f8ec61e74bf8019428b003f5070c33b
Author: Thomas Abraham <t-abraham@ti.com>
Date:	Sun Jan 4 09:41:13 2009 +0530

    usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support

    Adding DM6446 (TI DaVinci) platform specific USB functionality for
    USB Phy and VBUS initialization.

    Signed-off-by: Ravi Babu <ravibabu@ti.com>
    Signed-off-by: Swaminathan S <swami.iyer@ti.com>
    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
Author: Thomas Abraham <t-abraham@ti.com>
Date:	Sun Jan 4 09:41:09 2009 +0530

    usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM

    Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
    platform.

    Signed-off-by: Ravi Babu <ravibabu@ti.com>
    Signed-off-by: Swaminathan S <swami.iyer@ti.com>
    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit a142896934c755e679ba87e227a8e449f39b0012
Author: Thomas Abraham <t-abraham@ti.com>
Date:	Sun Jan 4 09:41:03 2009 +0530

    usb : musb : Adding host controller driver for Mentor USB controller

    Adding Mentor USB core functionality and Mentor USB Host controller
    functionality for Mentor USB OTG controller (musbhdrc).

    Signed-off-by: Ravi Babu <ravibabu@ti.com>
    Signed-off-by: Swaminathan S <swami.iyer@ti.com>
    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Jan 1 18:27:27 2009 -0500

    usb.h: use standard __LITTLE_ENDIAN from Linux headers

    Rather than forcing people to define a custom "LITTLEENDIAN", just use the
    __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
    already setting up.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 7b6e31eb17e3ff76238a60803fc531517d516223
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Wed Dec 31 10:33:56 2008 +0100

    USB ehci ixp4xx support

    Add USB ehci ixp4xx host controller. Test on ixdp465 board.

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Wed Dec 31 10:33:22 2008 +0100

    USB ehci remove infinite loop and use handshake function

    USB ehci code cleanup. Use handshake instead of infinite while loop
    to check the STD_ASS status

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 8fea2914ac974029b65926ef8247d908f84d202d
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Wed Dec 31 10:32:41 2008 +0100

    Add initial support for USB ehci pci

    Add USB ehci pci support. This patch doesn't include any
    pci_ids and it is not tested on real hardware.

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
Author: Bryan Wu <Bryan.Wu@analog.com>
Date:	Thu Jan 1 19:48:07 2009 -0500

    usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive

    The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
    does not like to be reset, so check for it.

    Signed-off-by: Bryan Wu <bryan.wu@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 1eb734fed3b79a5e6106dad16e88041894fdab30
Author: Thomas Abraham <t-abraham@ti.com>
Date:	Sun Jan 4 12:15:35 2009 +0530

    usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure

    This patch populates the 'priv' field of the USB keyboard device_t
    structure. The 'priv' field is populated with the address of the
    'struct usb_device' structure that represents the USB device.

    The 'priv' field can then be used in the 'usb_event_poll' function to
    determine the USB device that requires to be polled. An
    example of its usage in 'usb_event_poll' function is as below.

	device_t *dev;
	struct usb_device *usb_kbd_dev;

	<snip>

	dev = device_get_by_name("usbkbd");
	usb_kbd_dev = (struct usb_device *)dev->priv;
	iface = &usb_kbd_dev->config.if_desc[0];

    Signed-off-by: Thomas Abraham <t-abraham@ti.com>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 366523c26b6320af171459b19e6e0e9e3baa83ca
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Thu Dec 18 10:05:37 2008 +0100

    USB change speed

    USB changes the speed according to the port status

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
Author: Remy Böhmer <linux@bohmer.net>
Date:	Sat Dec 13 22:51:58 2008 +0100

    EHCI fix code and ixp4xx test.
    USB ehci configuration parameter:

    #define CONFIG_CMD_USB	    1
    #define CONFIG_USB_STORAGE	    1
    #define CONFIG_USB_EHCI
    #define CONFIG_USB_EHCI_IXP4XX	1
    #define CONFIG_EHCI_IS_TDI	1
    #define CONFIG_EHCI_DESC_BIG_ENDIAN     1
    #define CONFIG_EHCI_MMIO_BIG_ENDIAN     1
    #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
    #define CONFIG_LEGACY_USB_INIT_SEQ	    1

    2 USB Device(s) found
	   scanning bus for storage devices... 0 Storage Device(s) found
    => usb tree

    Device Tree:
      1  Hub (1.5MBit/s, 0mA)
      |  u-boot EHCI Host Controller
      |
      |+-2  Mass Storage (12MBit/s, 100mA)
	   Sony Storage Media 0C07040930296

    =>

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
Author: michael <michael@panicking.retis>
Date:	Thu Dec 11 13:43:55 2008 +0100

    [PATCH] This patch add varius fix to the ehci.
    - fix ehci_readl, ehci_writel
    - introduce new define in ehci.h
    - introduce the handshake function for waiting on a register
    - fix usb_ehci_fsl with the new HC_LENGTH macro

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit db63299b1dd2894ade542278210bccd046de6435
Author: michael <michael@panicking.retis>
Date:	Wed Dec 10 17:55:19 2008 +0100

    [PATCH] Fix EHCI usb. I start to test on a
    IXP465 board and I find some errors in the code. This
    patch fix:
    - descriptor initizialization (config, interface and endpoint
      must be one next-to the other when the USB_DT_CONFIG message
      is send.
    - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
      and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
    - Introduce the linux version of the usb_config_descriptor and
      usb_interface descriptor. This descriptor does't contains
      u-boot extension.

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit 6b92487dcf9afe83a3570153d66940fdb293be76
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Fri Nov 28 13:22:09 2008 +0100

    USB ehci freescale support

    Add USB ehci freescale support

    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit aaf098cfeed04595d4c5100ffd39095d79edbf90
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Fri Nov 28 13:20:46 2008 +0100

    USB ehci core support

    Add USB ehci core support

    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit 3e126484df7868e341545cce740b24b62b0cd3b7
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Fri Nov 28 13:19:19 2008 +0100

    Prepare USB layer for ehci

    Prepare USB layer for ehci support

    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Wed Dec 10 15:52:06 2008 +0100

    USB storage cleanup patch

    Cleanup usb storage

    Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit fe033ad6d0883063fe857237abb9436fab03208c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Oct 12 06:02:55 2008 -0400

    Blackfin: fixup misc warnings such as printf's and missing casts

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Oct 12 22:09:26 2008 -0400

    Blackfin: convert old boards to use COBJS-y Makefile style

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 22:38:37 2008 -0400

    Blackfin: bf533-stamp: rewrite resource swap logic

    The old swap function tended to clobber unrelated pins and screw up masks.
    Rewrite the thing from scratch so it only uses the resources it needs.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 29d4ea0a9073c82469184331010136f52edf8db6
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 22:08:42 2008 -0400

    Blackfin: bootldr: implement BF53x/BF56x LDR loader

    The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
    arbitrary memory locations, so implement a basic one in software.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8b35e3aeff6c2d747c37697997b3f8a808432329
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 22:05:42 2008 -0400

    Blackfin: implement real write support for OTP

    Now that real documentation has been released for the OTP interface and
    the on-chip ROM wrt writing/timings, implement support for reading/writing
    as well as dumping/locking.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 22:04:05 2008 -0400

    Blackfin: update on-chip ROM API

    This brings the API for the on-chip ROM in line with the toolchain and
    hardware documentation.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7633903bff432ec7b27905dce7396958553f2be6
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:52:17 2008 -0400

    Blackfin: allow serial console to be disabled

    Some devices have no UART device pulled out, so allow people to disable the
    driver completely in favor of other methods (like JTAG-console).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:51:20 2008 -0400

    Blackfin: support console-over-JTAG

    The Blackfin JTAG has the ability to pass data via a back-channel without
    halting the processor.  Utilize that channel to emulate a console.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cf8f2efb5f39c5225da92391c14a07eecbeca881
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:49:06 2008 -0400

    Blackfin: handle new anomalies with reset

    Workaround fun new anomalies related to software reset of the processor.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:44:00 2008 -0400

    Blackfin: pass RETX to Linux

    Make sure we save the value of RETX at power on and then pass it on to the
    kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:40:26 2008 -0400

    Blackfin: clarify relocation comment during init

    People often ask questions about the init process and when things go
    from flash to relocated base, so clarify the comments a bit.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:23:41 2008 -0400

    Blackfin: just set SP register directly during init

    No need to set the SP register indirectly to the configured value when it
    can be set directly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:15:53 2008 -0400

    Blackfin: add portmuxing for UARTs on the BF51x

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 4f6a313240c531042f16909a3a170ab047b95779
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Jun 1 01:26:29 2008 -0400

    Blackfin: respect CONFIG_CLKIN_HALF

    As pointed out by Ivan Koryakovskiy, the initialization code was not
    actually respecting the CONFIG_CLKIN_HALF option when configuring the
    PLL_CTL register.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Jun 1 01:21:34 2008 -0400

    Blackfin: use common memcpy routine during init

    Rather than using a local custom memcpy function, just call the existing
    optimized Blackfin version.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 362c943347364e9373af4c5530778491ab56ec2e
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Apr 9 02:27:06 2008 -0400

    Blackfin: set default boot SPI CS for BF538/BF539

    The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
    Blackfin parts.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Apr 9 02:20:59 2008 -0400

    Blackfin: punt unused BF533-STAMP definitions

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Apr 18 20:44:11 2008 -0400

    Blackfin: resurrect BF533-STAMP video splash driver

    This video driver used to live in the Blackfin cpu directory, but it was
    lost during the unification process.  This brings it back.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit a750d038f2548d846ea1e046d873dc932d041319
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Apr 9 02:31:29 2008 -0400

    Blackfin: tighten up post memory coding style

    No functional changes here; just cleanup code style a bit.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Apr 9 02:29:18 2008 -0400

    Blackfin: bf537-stamp nand: fix more style errors in previous commit

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 41f3325ae9add641036d7cb362e884b698e53f07
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 20:31:17 2008 -0400

    Blackfin: drop dead/wrong debug code in initdram()

    The DEBUG code in initdram() is quite old and was never really useful, so
    just drop it altogether.  Common Blackfin debug code does a better job.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 20:30:28 2008 -0400

    Blackfin: bf533-ezkit: shuffle flash defines a little

    Some of the flash defines weren't in the correct location and caused build
    problems in some configurations, so let's move types and defines to better
    local locations.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit be853bf86b41e91f4c422f0f56fdf87ea3191266
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 04:16:47 2008 -0400

    Blackfin: overhaul i2c driver

    The current Blackfin i2c driver does not work properly with certain devices
    due to it breaking up transfers incorrectly.  This is a rewrite of the
    driver and relocates it to the newer place in the source tree.

    Also remove duplicated I2C speed defines in Blackfin board configs and
    disable I2C slave address usage since it isn't implemented.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 04:00:07 2008 -0400

    Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection

    Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
    128kB when setting up the default flash protection region for U-Boot
    itself.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:57:39 2008 -0400

    Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE

    When setting up the global data, rather than relying on sizeof(), use the
    common CONFIG_SYS_GBL_DATA_SIZE define.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 01815c2d06c5b838f2cd536703e47bd2c9148194
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:52:24 2008 -0400

    Blackfin: implement general support for CONFIG_STATUS_LED

    Here are the Blackfin-specific and board-independent pieces for status leds.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 6882b5a79a3247494b62c05015fa672557f1bfaa
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:49:32 2008 -0400

    Blackfin: do not init i2c in Blackfin board init

    The common code takes care of calling i2c_init() when needed, so no point
    in us doing it as well.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 1118ea73698eee6e72ef5cbfc00e41746040304f
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:42:20 2008 -0400

    Blackfin: bfin_mac: update port muxing

    Adds support more Blackfin parts and fixes broken muxing for older ones.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 05b75e48832fc4afeecf8e76d704349557dffa35
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:35:44 2008 -0400

    Blackfin: fix dcache handling when doing dma memcpy's

    Our dcache invalidate function doesn't just invalidate, it also flushes.
    So rename the function accordingly and fix the dma_memcpy() function so it
    doesn't inadvertently corrupt the data destination.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 68e5632494168095d75f120af70043b68afd2476
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 18:56:56 2008 -0400

    Blackfin: dont generate ldrs with --force

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 18:55:30 2008 -0400

    Blackfin: pass --bmode/--initcode when creating ldr

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 18:39:27 2008 -0400

    Blackfin: minimize time cache is turned off when replacing cplb entries

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 21d631360430cf0ae9099612273cd4de28911ba9
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 15:31:13 2008 -0400

    Blackfin: split cache handling out of dma_memcpy()

    Creating a new dma_memcpy() function that skips all cache checks allows us
    to use the function in very early init where the cache is not yet setup.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d31eb38512bed377d5d4b3c696662e52120a2e4c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 15:30:49 2008 -0400

    Blackfin: abort dma_memcpy() for L1 scratchpad

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 81b799add709177e838466461f7b9989488b0fd5
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 15:27:52 2008 -0400

    Blackfin: rename bootm.c to boot.c

    The boot file contains functions for more than just "bootm", so rename it
    accordingly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:22:37 2008 -0400

    Blackfin: set more sane default board config values

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 36cd52a00794fb15ffab05d640acca92d7482993
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 15:24:59 2008 -0400

    Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c8054bc12e00669bd7588f2b30fef48aa94babac
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:21:27 2008 -0400

    Blackfin: add bit defines for DDR parts

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 154502fe0796f3b7a4698378c5d2080ae28a9782
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:21:11 2008 -0400

    Blackfin: add defines to describe active bootrom behavior

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jan 27 16:03:53 2009 -0600

    mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build

    extend commit c70564e6b1bd08f3230182392238907f3531a87e
    "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
    to the simpc8313 build and fix this:

    ...Large Page NAND...Configuring for SIMPC8313 board...
    nand_boot_fsl_elbc.o: In function `nand_boot':
    nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
    make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
    make: *** [nand_spl] Error 2

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 54a7cc4912feefa45be961cc47cc159563725d2f
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jan 28 09:25:31 2009 +0100

    mpc8536ds.c: include sata.h to for needed function prototypes

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Jan 27 18:03:12 2009 -0600

    Command usage cleanup

    Remove command name from all command "usage" fields and update
    common/command.c to display "name - usage" instead of
    just "usage". Also remove newlines from command usage fields.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Jan 27 18:03:11 2009 -0600

    amcc: Clean up command usage output

    Update taihu and taishan commands to use cmd_usage() function
    to display usage messages.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 62c3ae7c6ef215b1afa614abdf61acf077752207
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Jan 27 18:03:10 2009 -0600

    Standardize command usage messages with cmd_usage()

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Jan 27 18:03:09 2009 -0600

    pcs440ep: Clean up led command definition

    The pcs440ep's led command usage formatting is non-standard.  It
    was made standard in preparation for larger command usage updates.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Jan 27 18:03:08 2009 -0600

    Clean up diufb command definitions

    The diufb command usage formatting is non-standard.  It was
    made standard in preparation for larger command usage updates.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 6450a8485836fc80615ae6de6a864c33369b44f5
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jan 28 00:29:26 2009 +0100

    Update CHANGELOG, tiny coding style cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Jan 27 16:12:21 2009 -0500

    SATA: do not auto-initialize during boot

    Rather than have the board code initialize SATA automatically during boot,
    make the user manually run "sata init".  This brings the SATA subsystem in
    line with common U-Boot policy.

    Rather than having a dedicated weak function "is_sata_supported", people
    can override sata_initialize() to do their weird board stuff.  Then they
    can call the actual __sata_initialize().

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 50970839712dda35399e2fa83fe818df9354d618
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Mon Jan 26 08:45:14 2009 -0500

    part_efi: Fix partition size calculation due to inclusive ending LBA.

    The ending LBA is inclusive. Hence, the partition size should be
    ((ending-LBA + 1) - starting-LBA) to get the proper partition size.

    This is confirmed against the results from the parted tool.
    (e.g. use parted /dev/sda -s unit S print) and observe the size.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
Author: Tomasz Figa <tomasz.figa@gmail.com>
Date:	Tue Dec 30 18:35:57 2008 +0100

    jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE

    This patch fixes a bug (?) introduced after inclusion of the new
    JFFS2 code.

    When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
    fill in part->sector_size (keeping it as 0), but a correct value is
    needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
    to be in the same place of the memory, what obviously means
    impossibility to use the JFFS2 partition.

    This problem is fixed in this patch by including sector size
    calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.

    Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>

commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Dec 30 02:59:25 2008 -0500

    saveenv: standardize enablement

    Rather than special casing each environment type for enabling the saveenv
    command, have them all behave the same.  This avoids bitrot as new env
    sources are added/removed.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
Author: Andrew Dyer <adyer@righthandtech.com>
Date:	Mon Dec 29 17:36:01 2008 -0600

    soft_i2c.c add option for repeated start in i2c_read()

    This patch adds a #define to optionally change the behaviour of
    i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
    stop-start between sending the device address pointer write and
    reading back the data.  The current behaviour is retained as the
    default.

    While most devices will work either way, I have a smart battery(*)
    that requires repeated start, and someone at some point found a
    device that required a stop-start.

    (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf

    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>

commit 3429071700963ca2f944c51d695a7481af0cee33
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Jan 27 22:07:14 2009 +0100

    {delta,zylonite}/lowlevel_init.S: fix typo

    Commit 9d803d8c mistakenly changed some constants
    from 0x300 into 300 - this patch fixes it.

    Pointed out by Tom Evans <tom@ceos.com.au>, see
    http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
    details.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1bc434373013af241835c14011ac3f291dccbf53
Author: Stefan Althoefer <stefan.althoefer@web.de>
Date:	Sat Dec 20 19:40:41 2008 +0100

    drivers/net/e1000.c: missing terminator for supported devices

    Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>

commit 65f7d41031a70b1649b35020995c505edca91533
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Jan 27 21:36:28 2009 +0100

    fat.c: fix warning: array subscript is above array bounds

    Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 107b801cf3fe39612d69d70581ebc3bf5e215554
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Jan 2 15:11:41 2009 +0100

    Fix gunzip in case of insufficient output buffer

    U-Boot's gunzip() function does not handle the return code
    of zlib's inflate() function correctly. gunzip() is implemented
    to uncompress all input data in one run. So the correct return
    code for the good case is Z_STREAM_END. In case of insufficient
    output buffer memory inflate returns Z_OK. For gunzip() this
    is an error.

    It also makes sense to me to call inflateEnd() also in case
    of an error.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:25:01 2009 +0100

    MIPS: Add VCT board series support (Part 3/3)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ae691e5719c48f1d2826cb72722497d1d162765b
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:24:49 2009 +0100

    MIPS: Add VCT board series support (Part 2/3)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:24:39 2009 +0100

    MIPS: Add VCT board series support (Part 1/3)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 21 17:20:20 2009 +0100

    MIPS: Add flush_dcache_range() and invalidate_dcache_range()

    This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
    Those functions are needed for the upcoming dcache support for the USB
    EHCI driver. I chose this API because those cache handling functions are
    already present in the PPC architecture.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit de832a99414ff06a4b2cdc9f5280b387da039834
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jan 26 10:05:20 2009 +0100

    nand_spl: Fix compile problem with board_nand_init() prototype

    This patch removes the now obsolete and additionally wrongly defined
    board_nand_init() prototype from nand_spl/nand_boot.c.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit e8eac437189430d8e04a5d254ed92c58bc534a79
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Wed Jan 14 08:44:26 2009 -0500

    CFI: Add geometry reversal for STMicro M29W320ET

    Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.

    Modeled after flash_fixup_amd, this patch handles the geometry reversal
    or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
    Since I cannot test all STM's chips, the detection is implemented as
    narrow as possible for now.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0f8e851e897b535959a0781171910cd97f33c30c
Author: Jens Gehrlein <sew_s@tqs.de>
Date:	Tue Dec 16 17:25:55 2008 +0100

    CFI: increase performance of function find_sector()

    Tested on TQM5200S-BD with Samsung K8P2815UQB

    Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
Author: Jens Gehrlein <sew_s@tqs.de>
Date:	Tue Dec 16 17:25:54 2008 +0100

    CFI: avoid redundant function call in single word programming mode

    The function find_sector() doesn't need to be called twice in
    the case of AMD command set.
    Tested on TQM5200S-BD with Samsung K8P2815UQB.

    Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jan 26 10:15:23 2009 +0100

    ppc4xx: Remove compilation warning in gdppc440etc.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Jan 2 12:19:47 2009 +0100

    ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files

    Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
    Either they define or undef it. Because it's not used in any source
    files this patch removes any references to it.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Tue Dec 9 13:12:40 2008 +0100

    ppc4xx: Add GDsys PowerPC 440 ETX board support.

    Board support for the Guntermann & Drunck PowerPC 440 ETX module.
    Based on the AMCC Yosemite board support by Stefan Roese.

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Tue Dec 9 11:00:07 2008 +0100

    ppc4xx: Improve DDR autodetect

    Added support for a second memory bank to DDR autodetection for 440
    platforms.
    Made hardcoded values configurable.

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 71a040f4f556cca4d30f06805d82e717b3ef1020
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Nov 21 12:06:26 2008 +0900

    sh: sh7763rdp: Update sh7763rdp config

    Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
Author: Gary Jennejohn <garyj@denx.de>
Date:	Thu Nov 20 12:28:38 2008 +0100

    mgcoge make ether_scc.c work with CONFIG_NET_MULTI

    This change is needed for mgcoge because it uses two ethernet drivers.

    Add a check for the presence of the PIGGY board on mgcoge.	Without this
    board networking cannot work and the initialization must be aborted.

    Only allocate rtx once to prevent DPRAM exhaustion.

    Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
    soon) in eth.c.

    Signed-off-by: Gary Jennejohn <garyj@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Nov 21 12:04:18 2008 +0900

    sh: sh_eth: Change new network API

    sh_eth used old network API. This patch changed new API.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 12 13:31:02 2008 +0100

    net: smc911x: Make register read/write functions weak

    This patch changes the reg_read/_write to smc911x_reg_read/_write
    and defines then as weak so that they can be overridden by board
    specific version.

    This will be used by the upcoming VCTH board support.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 8b69b563039989885969d24465c56f8ac4c07c4c
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Nov 20 09:57:14 2008 +0100

    powerpc: net: support for the SMSC LAN8700 PHY

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d5254f149da9e6cd649d887b042ce577ef3ba78d
Author: Alessandro Rubini <rubini@unipv.it>
Date:	Sat Jan 24 18:10:37 2009 +0100

    Initial support for Nomadik 8815 development board

    The NMDK8815 board is distributed by ST Microelectornics.
    Other (proprietary) code must be run to unlock the CPU before
    U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.

    This is the initial port, with basic infrastructure and
    a working serial port.

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:18 2008 +0100

    OMAP3: Add I2C support

    Add I2C support.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:17 2008 +0100

    OMAP3: Add MMC support

    Add MMC support.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 12201a13547ec22ddcdae278e74465e54a3be60c
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:16 2008 +0100

    OMAP3: Add NAND support

    Add NAND support.

    Signed-off-by: Nishanth Menon <nm@ti.com>
    Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 91eee546737ae21d930af479530997174c342b13
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:15 2008 +0100

    OMAP3: Add common board, interrupt and system info

    Add common board, interrupt and system info code.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:14 2008 +0100

    OMAP3: Add common clock, memory and low level code

    Add common clock, memory and low level code

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 0b02b184003e6a5023e05d5f31de54db279b1431
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:13 2008 +0100

    OMAP3: Add common cpu and start code

    Add common cpu and start code.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit a8b6450546cd507d331b8fde384791d84bde5651
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:12 2008 +0100

    OMAP3: Add OMAP3, memory and function prototype headers

    Add OMAP3, memory and function prototype header files for OMAP3.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 2c803210a464abbac35752ca1c737514360b4c32
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Sun Dec 14 09:47:11 2008 +0100

    OMAP3: Add pin mux, clock and cpu headers

    Add pin mux, clock and cpu header files for OMAP3.

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit 685533646f4ff17a84ec9265cabb60af325b6e1f
Author: Maxim Artamonov <scn1874@yandex.ru>
Date:	Wed Dec 3 05:38:17 2008 +0300

    bugfix for i.mx31 CCM_UPCTL reg

    Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>

commit 24113a44ed5cd3257a0237c3961e121812fca6db
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Dec 30 03:15:38 2008 -0500

    easylogo: add optional gzip support

    Some images can be quite large, so add an option to compress the
    image data with gzip in the U-Boot image. Then at runtime, the
    board can decompress it with the normal zlib functions.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
Author: Bryan Wu <bryan.wu@analog.com>
Date:	Fri Jan 2 20:47:45 2009 -0500

    fat: fix unaligned errors

    A couple of buffers in the fat code are declared as an array of bytes.
    But it is then cast up to a structure with 16bit and 32bit members.
    Since GCC assumes structure alignment here, we have to force the
    buffers to be aligned according to the structure usage.

    Signed-off-by: Bryan Wu <bryan.wu@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
Author: Brad Bozarth <bflinux@yumbrad.com>
Date:	Thu Jan 1 22:45:47 2009 -0500

    spi flash: fix crash due to spi flash miscommunication

    Higher spi flash layers expect to be given back a pointer that was
    malloced so that it can free the result, but the lower layers return
    a pointer that is in the middle of the malloced memory. Reorder the
    members of the lower spi structures so that things work out.

    Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Sat Dec 20 14:54:21 2008 +0300

    FPU POST: fix warnings when building with 2.18 binutils

    When compile u-boot with the 2.18 binutils the following
    warning messages for each object file in post/lib_ppc/fpu/ is
    produced at the linking stage:

    post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
    ...

    This is because of the fact that, in general, the soft-float and
    hard-float ABIs are incompatible; the 2.18 binutils do checking
    of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
    produce the worning like above if these are not compatible.

    The incompatibility of ABIs is concerned only the float values:
    e.g. the soft-float ABI assumes the float argument passing in the
    pair of rX registers, and the hard-float ABI assumes passing of
    the float argument in the fX register. When we don't pass the float
    arguments between the functions compiled with different floatness,
    then such an application will work correctly.
    This is the case for the FPU POST: u-boot (compiled with soft-float)
    doesn't pass to (and doesn't get from) the FPU POST functions any
    floats; there are no functions exported from the post/lib_ppc/fpu/
    objects which would work with float parameters/returns too. So, we
    can reassure the linker not to worry about the difference in ABI
    attributes of linking files just by setting the 'soft-float'
    attribute for the objects in post/lib_ppc/fpu. And this patch does
    this.

    Also, to avoid passing both soft- and hard-float options in CFLAGS
    when compiling the files from post/lib_ppc/fpu (which is OK, but
    looks rather dirty) this patch removes the soft-float string from
    CFLAGS in post/lib_ppc/fpu/Makefile.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit a7c9310457e85b4598abe5b304108edf11332e2f
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Dec 17 16:36:22 2008 -0600

    Add support for Maxim's DS4510 I2C device

    Initial support for the DS4510, a CPU supervisor with
    integrated EEPROM, SRAM, and 4 programmable non-volatile
    GPIO pins. The CONFIG_DS4510 define enables support
    for the device while the CONFIG_CMD_DS4510 define
    enables the ds4510 command. The additional
    CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
    CONFIG_DS4510_RST defines add additional sub-commands
    to the ds4510 command when defined.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Tue Dec 16 14:51:56 2008 +0100

    common: Iteration limit for memory test.

    The iteration limit is passed to mtest as a fourth parameter:
    [start [end [pattern [iterations]]]]
    If no fourth parameter is supplied, there is no iteration limit and the
    test will loop forever.

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>

commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
Author: Stefan Roese <sr@denx.de>
Date:	Mon Dec 15 15:40:12 2008 +0100

    serial: Rename driver vcth to vct to support other board variants

    Moved driver vcth.c to vct.c to better reflect the VCT board series.
    This driver is now used by the VCT platforms:

    vct_premium
    vct_platinum
    vct_platinumsvc

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Fri Dec 12 00:45:27 2008 +0900

    nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit c3284b030b1cd492b4f46c576aea01bef258599d
Author: Peter Korsgaard <jacmet@sunsite.dk>
Date:	Wed Dec 10 16:24:16 2008 +0100

    common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED

    Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
    similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
    !CONFIG_AUTOBOOT_KEYED case.

    Do this by reversing the loop so we do at least one iteration before
    checking for timeout.

    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Mon Dec 8 17:24:08 2008 +0100

    Added legacy flash ST Micro M29W040B

commit 626d07348e5f9f302f4ea182161a89f7362a0488
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Mon Dec 8 20:04:51 2008 +1100

    Fixed off-by-one errors in lib_m68k/interrupts.c

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit a5989c42ae5e295f274a795c426c47819bbdbfda
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:29:05 2008 +1100

    Removed all references to CONFIG_SYS_RESET_GENERIC

    Generic i386 reset - #define made redundant by weak function

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:29:04 2008 +1100

    Remove #ifdef CONFIG_SC520 in source code

    CONFIG_SC520 is now used for conditional compile

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit ead056bc206f6b7ee6dc98766678b64635ea20b8
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:29:03 2008 +1100

    Added MMCR reset functionality

    Reset function specific to AMD SC520 microcontroller - Is more of a
    'hard reset' that the triple fault.

    Requires CONFIG_SYS_RESET_SC520 to be defined in config

    I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
    but ld requires that a object file in a library arhive MUST contain
    at least one function which does not override a weak function (and is
    called from outside the object file) in order for that object file to
    be extracted from the archive. This would be the only function on the
    new file, and hence, will never get linked in.

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:29:02 2008 +1100

    Moved generic (triple fault) reset code

    Moved from interrupts.c to cpu.c and made into a weak function to
    allow vendor specific override

    Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
    added to the vendor specific code without the need to remember to
    #undef usage of the generic method and if you forget to include your
    custom reset method, you will always get the default.

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 9933d609020c297788f53f334c8465fa7a99b10c
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:29:01 2008 +1100

    Moved definition of set_vector() to new header file

    This allows for future tidy ups and functionality that will require
    set_vector ()

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 407976185e0dda2c90e89027121a1071b9c77bfb
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:29:00 2008 +1100

    Moved sc520 specific code into new cpu/i386/sc520 folder

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 85ffbbd51914925a542d8528be7f072e5ab02157
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:28:58 2008 +1100

    Renamed cpu/i386/reset.S to resetvec.S

    Brings i386 in line with other CPUs with a reset vector and frees up reset.c
    for CPU reset functions

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit a3f4c123f569474e80ea012b8db0de46afdb6443
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Jan 24 01:01:49 2009 +0100

    Makefile: keep lists sorted.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c620c01e96814558470698ed5cab1bf2f504d1b5
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Dec 7 10:28:57 2008 +1100

    Added initial eNET board support

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
Author: Gary Jennejohn <garyj@denx.de>
Date:	Thu Nov 20 11:37:26 2008 +0100

    POWERPC 82xx: add the SCC as an HDLC controller

    Right now this is only used by keymile.

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Nov 20 09:59:09 2008 +0100

    powerpc, keymile boards: extract identical config options

    This patch extracts the identical config options for the
    keymile boards mgcoge, mgsuvd and kmeter1 in a new
    common config file keymile-common.h.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 210c8c00aad3328145204adab434bb7d70b06b75
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Nov 21 08:29:40 2008 +0100

    powerpc: keymile: Add a check for the PIGGY debug board

    Check the presence of the PIGGY on the keymile boards mgcoge,
    mgsuvd and kmeter1. If the PIGGY is not present, dont register
    this Ethernet device.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit de0443614af4d16675ab436665aeb11ddc9f7214
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Nov 20 09:57:47 2008 +0100

    powerpc: 83xx: add support for the kmeter1 board

    This patch adds support for the kmeter1 board from Keymile,
    based on a Freescale MPC8360 CPU.

    - serial console on UART 1
    - 256 MB DDR2 RAM
    - 64 MB NOR Flash
    - Ethernet RMII Mode over UCC4
    - PHY SMSC LAN8700

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue Nov 4 13:51:18 2008 +0100

    Add a do_div() wrapper macro, lldiv().

    Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
    the dividend and returns the result of division, so it is useful
    in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Jan 23 14:22:14 2009 -0600

    85xx: Add a 36-bit physical configuration for MPC8572DS

    We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
    to allow for larger memory sizes.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Jan 23 14:22:13 2009 -0600

    85xx: Handle eLBC difference w/36-bit physical

    The eLBC only handles 32-bit physical address in systems with 36-bit
    physical.  The previos generation of LBC handled 34-bit physical
    address in 36-bit systems.	Added a new CONFIG option to convey
    the difference between the LBC and eLBC.

    Also added defines for XAM bits used in LBC for the extended 34-bit
    support.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Jan 23 14:22:12 2009 -0600

    85xx: Use BR_ADDR macro for NAND chipselects

    Use the new BR_ADDR macro to properly setup the address field of the
    localbus chipselects used by NAND.

    This allows us to deal with 36-bit phys on these boards in the future.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Thu Jan 15 11:58:35 2009 -0500

    Add secondary CPUs processor frequency for e500 core

    This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
    and prints each CPU's frequency separately. It also fixes up each CPU's
    frequency in "clock-frequency" of fdt blob.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit bf5b1f0c0d28ce062e1d368680632dfb099de692
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 21 16:31:53 2008 +0800

    85xx: enable the auto self refresh for wake up ARP

    The wake up ARP feature need use the memory to process
    wake up packet, we enable auto self refresh to support it.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 21 16:31:43 2008 +0800

    fsl-ddr: use the 1T timing as default configuration

    For light loaded system, we use the 1T timing to gain better
    memory performance, but for some heavily loaded system,
    you have to add the 2T timing options to board files.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 22cca7e1cd54590e967c73558b07ffbdccd39504
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 21 16:31:35 2008 +0800

    fsl-ddr: make the self refresh idle threshold configurable

    Some 85xx processors have the advanced power management feature,
    such as wake up ARP, that needs enable the automatic self refresh.

    If the DDR controller pass the SR_IT (self refresh idle threshold)
    idle cycles, it will automatically enter self refresh. However,
    anytime one transaction is issued to the DDR controller, it will
    reset the counter and exit self refresh state.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 21 16:31:29 2008 +0800

    fsl-ddr: clean up the ddr code for DDR3 controller

    - The DDR3 controller is expanding the bits for timing config
    - Add the DDR3 32-bit bus mode support

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 21 16:31:22 2008 +0800

    fsl-ddr: update the bit mask for DDR3 controller

    According to the latest 8572 UM, the DDR3 controller
    is expanding the bit mask, and we use the extend ACTTOPRE
    mode when tRAS more than 19 MCLK.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit aca5f018a8386b85469482ed9867e3e29a2437d0
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 16:08:40 2008 -0600

    85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards

    Introduce a new define to seperate out the virtual address that PCI
    IO space is at from the physical address.  In most situations these are
    mapped 1:1.  However any code accessing the bus should use VIRT.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 16:08:39 2008 -0600

    85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards

    Introduce a new define to seperate out the virtual address that PCI
    memory is at from the physical address.  In most situations these are
    mapped 1:1.  However any code accessing the bus should use VIRT.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit a6e04c344ad1eefd47a75484441b385da815b8df
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 16:08:38 2008 -0600

    85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards

    Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
    of TLBs.  This is what we should have always been using from the start.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 16:08:37 2008 -0600

    85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards

    Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
    of _IO_BASE so we are more explicit.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 10795f42cb94e71bcb262b615084f69dd886399a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 16:08:36 2008 -0600

    85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards

    Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
    of _MEM_BASE so we are more explicit.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 14:19:34 2008 -0600

    85xx: separate FLASH BASE virtual from physical address

    Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
    maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.

    This allows us to deal with 36-bit phys on these boards in the future.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 52b565f5ad23b682489055b187767d8bf1c2e444
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 2 14:19:33 2008 -0600

    85xx: separate PIXIS virtual from physical address

    Added a PIXIS_BASE_PHYS for use as the physical address and maintain
    PIXIS_BASE as the virtual address of the PIXIS fpga registers.

    This allows us to deal with 36-bit phys on these boards in the future.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 30837e5b21d5a742983581ab9ee3fac085311d19
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Tue Nov 11 08:52:09 2008 -0500

    Add README file for MPC8572DS board

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 20 16:15:04 2008 -0400

    Blackfin: use common strmhz() in system output

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 5bb907a4925397789c90d074f4f7e92ce6b39402
Author: Ron Madrid <ron_madrid@sbcglobal.net>
Date:	Thu Jan 22 15:05:24 2009 -0800

    mpc83xx: New board support for SIMPC8313

    This patch will create a new board, SIMPC8313, from Sheldon Instruments.  This
    board boots from NAND devices and is configureable for either large or small
    page devices.  The board supports non-soldered DDR2, one ethernet port, a
    Marvell 88E1118 PHY, and PCI host support.	The board also has a FPGA connected
    to the eLBC providing glue logic to a TMS320C67xx DSP.

    Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Jan 18 19:46:06 2009 -0500

    nand: fixup printf modifiers to match types used

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 389e6620e2271096df3316917528003627db4021
Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
Date:	Tue Jan 20 16:57:55 2009 +0100

    nand read.jffs2 (nand_legacy) in common/cmd_nand.c

    Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
    With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
    "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
    tested before ".jffs2s" and only the first two characters are compared.

    Correction:
    Test for ".jffs2s" first and compare the first 7 characters.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Fri Jan 16 18:55:54 2009 +0100

    NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS

    This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
    changes the default from 8 to 1 for the legacy and the new MTD
    NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
    in the board config files because none of the boards use multi
    chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
    define

     #define NAND_MAX_CHIPS	     CONFIG_SYS_MAX_NAND_DEVICE

    but that's bogus and did not work anyhow.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit c70564e6b1bd08f3230182392238907f3531a87e
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Dec 2 11:48:51 2008 +0800

    NAND: Fix cache and memory inconsistency issue

    We load the secondary stage u-boot image from NAND to
    system memory by nand_load, but we did not flush d-cache
    to memory, nor invalidate i-cache before we jump to RAM.
    When the system has cache enabled and the TLB/page attribute
    of system memory is cacheable, it will cause issues.

    - 83xx family is using the d-cache lock, so all of d-cache
      access is cache-inhibited. so you can't see the issue.
    - 85xx family is using d-cache, i-cache enable, partial
      cache lock. you will see the issue.

    This patch fixes the cache issue.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 50657c273278f74378e1ac39b41d612b92fdffa0
Author: Nishanth Menon <menon.nishanth@gmail.com>
Date:	Sat Dec 13 09:43:06 2008 -0600

    NAND: Enable nand lock, unlock feature

    Enable nand lock, unlock and status of lock feature.
    Not every device and platform requires this, hence,
    it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK

    Nand unlock and status operate on block boundary instead
    of page boundary. Details in:
    http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT

    Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
    Includes preliminary suggestions from Scott Wood

    Signed-off-by: Nishanth Menon <nm@ti.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Dec 6 02:40:55 2008 -0500

    NAND: move board_nand_init to nand.h

    Rather than putting the function prototype for board_nand_init() in the one
    place where it gets called, put it into nand.h so that every place that also
    defines it gets the prototype.  Otherwise, errors can go silently unnoticed
    such as using the wrong return value (void rather than int) when defining
    the function.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 1ae39862044ebb1e682234b51f94421e3f871d6a
Author: Stefan Roese <sr@denx.de>
Date:	Tue Dec 2 11:06:47 2008 +0100

    OneNAND: Additional sync with 2.6.27

    - Add subpage write support
    - Add onenand_oob_64/32 ecclayout

    This has been missing and without it UBI has some incompatibilies issues
    with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
    placed differently (2048 instead of 512) without this fix.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Thu Nov 13 15:14:33 2008 +0900

    Add markbad function

    Add missing markbad function
    If not, it's hang when it entered the mtd->mark_bad().

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 12 13:47:24 2008 +0100

    OneNAND: Bad block aware read/write command support

    Update OneNAND command to support bad block awareness.
    Also change the OneNAND command style to better match the
    NAND version.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 11 10:29:09 2008 +0100

    OneNAND: Save version_id in onenand_chip struct

    The version (ver_id) was not stored in the onenand_chip structure and
    because of this the continuous locking scheme could be enabled on some
    chips.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 11 10:28:53 2008 +0100

    OneNAND: Fix compiler warnings

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Nov 4 14:55:06 2008 +0800

    mpc83xx: enable eLBC NAND support for MPC8315ERDB board

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Tue Nov 4 09:24:07 2008 +0900

    Sync with 2.6.27

    Sync with OneNAND kernel codes

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit e7f325be9edeb84bb457301776bbac1f7257dafc
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jan 5 13:35:31 2009 +0100

    microblaze: Use cache functions (especially cache status)
    in systems which are configured without flash

commit e9b737deb2c30125362d20e24170617476026e94
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jan 5 13:29:32 2009 +0100

    microblaze: Add cache flush

commit b4f8dda35bfad447b4106828232705b2e878d168
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jan 5 13:28:40 2009 +0100

    microblaze: Add bootup messages to board.c

commit 330e55459bc9983341da6c1d5c7fe00a664436fe
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Dec 19 13:25:55 2008 +0100

    microblaze: Change microblaze-generic config file

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Dec 19 13:14:05 2008 +0100

    microblaze: Rename ml401 to microblaze-generic

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 6677876181cc8772bca8a372479a500d160f3993
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Jan 20 11:56:11 2009 -0600

    83xx: Use the proper sequence for updating IMMR.

    This ensures that subsequent accesses properly hit the new window.

    The dcbi during the NAND loop was accidentally working around this;
    it's no longer necessary, as the cache is not enabled.

    Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 8b34557c546e5e9f34ebf83c93413dad973d93df
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Jan 8 04:26:19 2009 +0300

    mpc83xx: Add PCI-E support for MPC837XEMDS boards

    MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
    provides two PCI-E (x2) ports. Though, only one port can be used in x2
    mode. Two ports can function simultaneously in x1 mode.

    PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 8f11e34b31a7be124a3239653f33af9510502045
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Jan 8 04:26:17 2009 +0300

    mpc83xx: Add PCI-E support for MPC8315ERDB boards

    MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
    support them.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Jan 8 04:26:12 2009 +0300

    mpc83xx: Add support for MPC83xx PCI-E controllers

    This patch adds support for MPC83xx PCI-E controllers in Root Complex
    mode.

    The patch is based on Tony Li and Dave Liu work[1].

    Though unlike the original patch, by default we don't register PCI-E
    buses for use in U-Boot, we only configure the controllers for future
    use in other OSes (Linux). This is done because we don't have enough
    of spare BATs to map all the PCI-E regions.

    To actually use PCI-E in U-Boot, users should explicitly define
    CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
    only then U-Boot will able to access PCI-E, but at the cost of disabled
    address translation.

    [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html

    Signed-off-by: Tony Li <tony.li@freescale.com>
    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Acked-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
Author: Ira Snyder <iws@ovro.caltech.edu>
Date:	Mon Jan 12 13:33:17 2009 -0800

    MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode

    When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
    not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
    "Clocking in PCI Agent Mode".

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 75f35209f702bb26826855ed8c8e4d108ab5f412
Author: Ira Snyder <iws@ovro.caltech.edu>
Date:	Mon Jan 12 13:32:26 2009 -0800

    83xx: PCI agent mode fixes for multi-board systems

    When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
    the boards will lock up the PCI bus by scanning against each other.

    The boards lock against each other by trying to access the PCI bus before
    clearing their configuration lock bit. Both boards end up in a loop,
    sending and receiving "Target Not Ready" messages forever.

    When running in PCI agent mode, the scanning now takes place after the
    boards have cleared their configuration lock bit.

    Also, add a missing declaration to the mpc83xx.h header file, fixing a
    build warning.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 455a46915b82896cc2070eb326d075555c2bc580
Author: Ron Madrid <ron_madrid@sbcglobal.net>
Date:	Fri Dec 12 13:12:45 2008 -0800

    mpc83xx: Size optimization of start.S

    Currently there are in excess of 100 bytes located at the beginning of the image
    built by start.S that are not being utilized.  This patch moves a few functions
    into this part of the image.  This will create a greater number of *available*
    bytes that can be used by board specific code in NAND builds and will decrease
    the size of the assembled code in other builds.

    Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jan 21 23:08:12 2009 +0100

    Prepare v2009.01

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 635e5f8fc82365e6e9734b3132bc95135a6de679
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Jan 18 21:37:48 2009 +0100

    Prepare 2009.01-rc3

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4cda437898f7873752f0201757cd33f12196ce87
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Jan 17 13:32:42 2009 -0500

    build system: treat all Darwin's alike

    The x86 based version of Darwin behaves the same quirky way as the powerpc
    Darwin, so only check HOSTOS when setting up Darwin workarounds.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c088a108c75db565e07292fd668dfa5491e85bc2
Author: Peter Korsgaard <jacmet@sunsite.dk>
Date:	Wed Jan 14 13:52:24 2009 +0100

    fdt_resize(): fix actualsize calculations with unaligned blobs

    The code in fdt_resize() to extend the fdt size to end on a page boundary
    is wrong for fdt's not located at an address aligned on a page boundary.
    What's even worse, the code would make actualsize shrink rather than grow
    if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
    causing fdt_add_mem_rsv to fail.

    Fix it by aligning end address (blob + size) to a page boundary instead.
    For aligned fdt's this is equivalent to what we had before.

    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

commit fadad1573fb16c90025f08a2861d6047d093cba7
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Jan 9 04:38:17 2009 -0500

    ncb: use socklen_t

    The recvfrom() function takes a socklen_t, not an int.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Jan 11 16:35:16 2009 +0100

    sh: serial: use readx/writex accessors

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 9e1fa628bdb64745811cdd26c4f953846c076180
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Jan 11 16:35:15 2009 +0100

    sh: serial: coding style cleanup

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c9935c992575922b7ef13eec0656ed8665d324e3
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sun Jan 11 17:48:56 2009 +0900

    sh: Fix compile error on lowlevel_init file

    lowlevel_init of SH was corrected to use the write/readXX macro.
    However, there was a problem that was not able to be compiled partially.
    This patch corrected this.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit a5b04d00bfeb940c62232972ce644d50b45797f9
Author: Kieran Bingham <kieranbingham@gmail.com>
Date:	Tue Dec 30 01:16:03 2008 +0000

    sh: Fix up rsk7203 target for out of tree build

    Fix up rsk7203 target to build successfully using out-of-tree build.

    Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f7e78f3b74aae9caca2997bad865a72338326c0a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Dec 20 19:29:49 2008 +0100

    sh: use write{8,16,32} in all lowlevel_init

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit e4430779623af500de1cee7892c379f07ef59813
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Dec 20 19:29:48 2008 +0100

    sh: lowlevel_init coding style cleanup

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Dec 20 15:27:45 2008 +0100

    sh: update sh2/sh2a timer coding style

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 1e15ff999322e81af4c0c0c548908f38944ba39c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Dec 20 15:25:22 2008 +0100

    sh: update sh timer coding style

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0e3ece33801e377be67ffa29f083421ad820f28b
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jan 14 23:26:05 2009 +0100

    Prepare 2009.01-rc2

    Update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e92c9a860e44c14513c8909ce4299e253a775eeb
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jan 14 22:35:30 2009 +0100

    cpu/mpc824x/Makefile: fix warning with parallel builds

    Parallel builds would occasionally issue this build warning:

	ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists

    Use "ln -sf" as quick work around for the issue.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3ba605d4beec649438539e7df97b5fedb26592fb
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Jan 2 12:18:49 2009 +0100

    ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards

    This patch adds esd's loadpci BSP command to CPCI4052 and
    CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 600fe46fb3dab7f07604f9009904f31584415114
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Jan 2 12:18:12 2009 +0100

    ppc4xx: Disable pci node in device tree on CPCI405 pci adapters

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f6a1f490d224c600a09137e58d1026d150b8e679
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Jan 2 12:17:36 2009 +0100

    ppc4xx: Cleanup CPCI405 board code

    This patch cleans up CPCI405 board support:
    - wrap long lines
    - unification of spaces in function calls
    - remove dead code

    Use correct io accessors on peripherals.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Jan 2 12:16:35 2009 +0100

    ppc4xx: Enable auto RS485 mode on PLU405 boards

    This patch turns on the auto RS485 mode in the 2nd external
    uart on PLU405 boards. This is a special mode of the used
    Exar XR16C2850 uart. Because these boards only have a 485 physical
    layer connected it's a good idea to turn it on by default.

    Signed-off-by: Matthias Fuchs <mf@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Tue Jan 13 16:29:28 2009 -0500

    Some changes of TLB entry setting for MPC8572DS

    - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
    all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
    can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)

    - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 950264317eb9594b2b5ee2fb65206200a1c6007a
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Tue Jan 13 16:29:22 2009 -0500

    Change DDR tlb start entry to CONFIG param for 85xx

    So that we can locate the DDR tlb start entry to the value other than 8. By
    default, it is still 8.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:	Fri Jan 9 16:02:35 2009 +0800

    Change PCIE1&2 deciide logic on MPC8544DS board more readable

    The IO port selection for MPC8544DS board:
     Port			cfg_io_ports
     PCIE1		0x2, 0x3, 0x4, 0x5, 0x6, 0x7
     PCIE2		0x4, 0x5, 0x6, 0x7
     PCIE3		0x6, 0x7
     This patch changes the PCIE12 and PCIE2 logic more readable.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:	Fri Jan 9 16:01:52 2009 +0800

    PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit

    PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
    PCIE1 bit.
    On MPC8572DS board, PCIE refers to PCIE1.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:	Fri Jan 9 16:00:55 2009 +0800

    Fix IO port selection issue on MPC8544DS and MPC8572DS boards

    The IO port selection is not correct on MPC8572DS and MPC8544DS board.
     This patch fixes this issue.
     For MPC8572
     Port			cfg_io_ports
     PCIE1		0x2, 0x3, 0x7, 0xb, 0xc, 0xf
     PCIE2		0x3, 0x7
     PCIE3		0x7

    For MPC8544
    Port			cfg_io_ports
    PCIE1		0x2, 0x3, 0x4, 0x5, 0x6, 0x7
    PCIE2		0x4, 0x5, 0x6, 0x7
    PCIE3		0x6, 0x7
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Wed Dec 3 22:36:44 2008 -0600

    mpc8610hpcd: Fix PCI mapping concepts

    Rename _BASE to _BUS, as it's actually a PCI bus address,
    separate virtual and physical addresses into _VIRT and _PHYS,
    and use each appopriately.	This makes the code easier to read
    and understand, and facilitates mapping changes going forward.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 79e436cad3b4a7db88408c3f05175028f30d700d
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Wed Dec 3 22:36:26 2008 -0600

    sbc8641d: Fix PCI mapping concepts

    Rename _BASE to _BUS, as it's actually a PCI bus address,
    separate virtual and physical addresses into _VIRT and _PHYS,
    and use each appopriately.	This makes the code easier to read
    and understand, and facilitates mapping changes going forward.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jan 12 14:50:35 2009 +0100

    MPC86xx: fix build warnings

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 032a1c934ef4dc003281f57302b6e693062c1868
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Jan 5 16:09:44 2009 -0500

    bf537-stamp/nand: fix board_nand_init prototype

    The board_nand_init() function should return an int, not void.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 687f952e4119594ab913be11c90f7f018c2a7a79
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Dec 11 07:04:48 2008 -0500

    Blackfin: drop CONFIG_SPI handling in board init

    The eeprom SPI init functions are duplicated as the common code already
    executes these for us.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e7e684b10d73a303902208594c7c3e7e0d753282
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Oct 24 17:51:57 2008 -0400

    Blackfin: fix out-of-tree building with ldscripts

    Many of the Blackfin board linker scripts are preprocessed, so make sure we
    output the linker script into the build tree rather than the source tree.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Oct 24 17:48:54 2008 -0400

    Blackfin: fix linker scripts to work with --gc-sections

    Make sure all .text sections get pulled in and the entry point is properly
    referenced so they don't get discarded when linking with --gc-sections.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 20:45:44 2008 -0400

    Blackfin: set proper LDRFLAGS for parallel booting LDRs

    In order to boot an LDR out of parallel flash, the ldr utility needs a few
    flags to tell it to generate the right header.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Jan 6 21:41:59 2009 +0100

    at91rm9200: move define from lowlevel_init to header

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8a48686fac2030287765f1970ea046bd5734b733
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 3 17:22:26 2009 +0100

    m501sk: move to the common memory setup

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d481c80d78f954133c035dae6c7d22de3625795d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 3 17:22:25 2009 +0100

    at91rm9200: rename lowlevel init value to CONFIG_SYS_

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
Author: Nicolas Ferre <nicolas.ferre@atmel.com>
Date:	Tue Jan 6 21:13:14 2009 +0100

    at91: add at91sam9xeek board support

    At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
    it as another entry for at91sam9260 in the Makefile.

    Check documentation at :
    http://www.atmel.com/dyn/products/product_card.asp?part_id=4263

    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Jan 6 21:15:57 2009 +0100

    fix bmp_logo.h make dependencies to allow parallel build

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit e12d9a8fb48d24176efffccc072b445e60a3afe4
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jan 3 17:22:24 2009 +0100

    at91: Fix Atmel's at91sam9 boards out of tree build

    introduced in commit 89a7a87f084c

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0668236bafaa1c11c521652a2facebc74beecbf0
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 30 22:56:11 2008 +0100

    README: update mailing list name and hits to patch submission.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Dec 23 16:32:01 2008 -0600

    85xx: Enable inbound PCI config cycles for X-ES boards cleanup

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Dec 23 16:32:00 2008 -0600

    XPedite5200 board support cleanup

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Dec 2 21:58:04 2008 +0100

    usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
Author: Trent Piepho <tpiepho@freescale.com>
Date:	Wed Dec 3 15:16:37 2008 -0800

    mpc8[56]xx: Put localbus clock in sysinfo and gd

    Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
    and print it out, but don't save it.

    This changes where its calculated and stored to be more consistent with the
    CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.

    The localbus frequency is added to sysinfo and calculated when sysinfo is
    set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.

    get_clocks() copies the frequency into the global data, as the other
    frequencies are, into a new field that is only enabled for MPC85xx and
    MPC86xx.

    checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
    from sysinfo, like the other frequencies, instead of calculating it on the
    spot.

    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
Author: Trent Piepho <tpiepho@freescale.com>
Date:	Wed Dec 3 15:16:36 2008 -0800

    mpc86xx: Double local bus clock divider

    The local bus clock divider should be doubled for both 8610 and 8641.

    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 446c381e3e16f19857b72ea0d06241267b8b9d58
Author: Trent Piepho <tpiepho@freescale.com>
Date:	Wed Dec 3 15:16:35 2008 -0800

    mpc8568: Double local bus clock divider

    The clock divider for the MPC8568 local bus should be doubled, like the
    other newer MPC85xx chips.

    Since there are now more chips with a 2x divider than a 1x, and any new
    85xx chips will probably be 2x, invert the sense of the #if so that it
    lists the 1x chips instead of the 2x ones.

    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Dec 16 12:09:27 2008 +0800

    85xx: Fix the boot window issue

    If one custom board is using the 8MB flash, it is set
    as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
    The current start.S code will be broken at switch_as.

    It is because the TLB1[15] is set as 16MB page size,
    EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.

    For the 8MB flash case, the EPN = 0xefxxxxxx,
    RPN = 0xffxxxxxx. Assume the virt address of switch_as
    is 0xef7ff18c, the real address of the instruction at
    switch_as should be 0xff7ff18c. the 0xff7ff18c is out
    of the range of the default 8MB boot LAW window
    0xff800000 - 0xffffffff.

    So when we switch to AS1 address space at switch_as,
    the core can't fetch the instruction at switch_as any
    more. It will cause broken issue.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 58da8890d5fbd074746037722a423de9ac408616
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Thu Dec 11 15:47:50 2008 -0500

    sbc8548: use proper PHY address

    The values given for the PHY address were wrong, so the code
    read no valid PHY ID, and fell through to the generic PHY
    support, which would work on 1000M but would not auto negotiate
    down to 100M or 10M.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Thu Dec 11 15:47:51 2008 -0500

    sbc8548: enable command line editing by default.

    Lets make things a bit more user friendly.	It isn't 1985 anymore.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Thu Dec 11 15:47:49 2008 -0500

    sbc8548: don't enable the 3rd and 4th eTSEC

    These interfaces don't have usable connectors on the board, so don't
    bother enumerating or configuring them.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit 181a3650113883728927928b3ac81ad6dade4b2c
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Wed Dec 3 10:08:19 2008 -0500

    Set IVPR to kenrel entry point in second core boot page

    Assuming the OSes exception vectors start from the base of kernel address, and
    the kernel physical starting address can be relocated to an non-zero address.
    This patch enables the second core to have a valid IVPR for debugger before
    kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
    value for second core which runs kernel at different physical address other
    than 0x0.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit a5d212a263c58cc746481bf1fc878510533ce7d6
Author: Trent Piepho <tpiepho@freescale.com>
Date:	Wed Dec 3 15:16:34 2008 -0800

    mpc8xxx: LCRR[CLKDIV] is sometimes five bits

    On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
    instead of four.

    In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems.  It
    should be safe as the fifth bit was defined as reserved and set to 0.

    Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.

    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 58ec4866ed916c7e422f5107bb27b0822084728e
Author: Trent Piepho <tpiepho@freescale.com>
Date:	Wed Dec 3 15:16:38 2008 -0800

    mpc8[56]xx: Put localbus clock in device tree

    Export the localbus frequency in the device tree, the same way the CPU, TB,
    CCB, and various other frequencies are exported in their respective device
    tree nodes.

    Some localbus devices need this information to be programed correctly, so
    it makes sense to export it along with the other frequencies.

    Unfortunately, when someone wrote the localbus dts bindings, they didn't
    bother to define what the "compatible" property should be.	So it seems no
    one was quite sure what to put in their dts files.

    Based on current existing dts files in the kernel source, I've used
    "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
    of the 85xx devices, and are looked for by the Linux code.	The eLBC is
    apparently not entirely backward compatible with the pq3 LBC and so eLBC
    equipped platforms like 8572 won't use pq3-localbus.

    For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
    and is also looked for by the Linux code.  On MPC8641, I've also used
    "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
    which don't use "fsl,elbc" or any other acceptable name to match on.

    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 16 14:59:22 2008 -0600

    NAND FSL elbc: Use virt_to_phys to determine which bank is in use

    The current code that determines which bank/chipselect is used for a
    given NAND instance only worked for 32-bit addresses and assumed
    a 1:1 mapping.  This breaks in 36-bit physical configs.

    The proper way to handle this is to use the virt_to_phys() and
    BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
    with the the virtual address the NAND code uses.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Scott Wood <scottwood@freescale.com>

commit 77c8115b1f1871811633eae77a5a700fac1f0e50
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 16 14:59:21 2008 -0600

    ppc: Use addrmap in virt_to_phys and map_physmem.

    If we have addr map support enabled use the mapping functions to
    implement virt_to_phys() and map_physmem().

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 16 14:59:20 2008 -0600

    85xx: Add support to populate addr map based on TLB settings

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Dec 1 13:47:13 2008 -0600

    XPedite5200 board support

    Initial support for Extreme Engineering Solutions XPedite5200 -
    a MPC8548-based PMC single board computer.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Oct 29 12:39:27 2008 -0500

    85xx: Enable inbound PCI config cycles for X-ES boards

    Update X-ES Freescale boards to allow inbound PCI configuration
    cycles when configured as agent/endpoint.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Dec 17 16:36:23 2008 -0600

    XPedite5370 board support

    Initial support for Extreme Engineering Solutions XPedite5370 -
    a MPC8572-based 3U VPX single board computer with a PMC/XMC
    site.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit e92739d34e2d6b6aca93b2598248210710897ce8
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Dec 17 16:36:21 2008 -0600

    Add support for PCA953x I2C gpio devices

    Initial support for NXP's 4 and 8 bit I2C gpio expanders
    (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
    enables support for the devices while the CONFIG_CMD_PCA953X
    define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
    define enables an 'info' sub-command which provides summary
    information for the given pca953x device.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 7a8979591171676417ab36852d8811a8c46accd8
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Oct 29 12:39:26 2008 -0500

    pci/fsl_pci_init: Enable inbound PCI config cycles

    Add fsl_pci_config_unlock() function to enable a
    PCI/PCIe interface configured in agent/endpoint mode to
    respond to inbound PCI configuration cycles.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Dec 17 16:43:18 2008 +0100

    avr32: Remove second definition of virt_to_phys()

    The second definition introduced by 65e43a1063 conflicts with the
    existing one.

    Also, convert the existing definition to use phys_addr_t. The volatile
    qualifier is still needed due to brain damage elsewhere.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit b616f2b545f73757669b37386f0b37bb61fc6797
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 8 22:27:18 2008 +0200

    MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Dec 16 22:10:31 2008 +0100

    MIPS: qemu_mips: update doc to use all disk and boot linux kernel

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 13095b2f07dacb1f863772266c1789d47a523a8a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Dec 16 22:10:30 2008 +0100

    MIPS: qemu_mips: move env storage just after u-boot

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit aced78d852d0b009e8aaa1445af8cb40861ee549
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 23:48:27 2008 +0100

    Prepare 2009.01-rc1

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 23:13:46 2008 +0100

    include/configs/at91cap9adk.h: fix typo.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 45ca04f2377361593151d2d4da51f8ba4832d233
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 22:32:25 2008 +0100

    board/trab/memory.c: Fix compile problems.

    Apply changes from commit 44b4dbed to board/trab/memory.c, too.

    Actually we'd need a major cleanup here - as it turns out,
    board/trab/memory.c is more or less a verbatim copy of
    post/drivers/memory.c ... but then, trab is EOL anyway,r
    so this is not worth the effort.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ff49ea8977b56916edd5b1766d9939010e30b181
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Dec 16 14:24:16 2008 -0600

    NAND: Mark the BBT as scanned prior to calling scan_bbt.

    Otherwise, recursion can occur if scan_bbt does not find a bad block
    table, and tries to write one, and the attempt to erase the BBT area
    causes a bad block check.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 584eedab66d0828f2d571a24b10526c4e65f547b
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Dec 11 05:51:57 2008 +0300

    jffs2: include <linux/mtd/compat.h> instead of defining own min_t

    Include <linux/mtd/compat.h> header for min_t definition instead of
    providing our own one. Removes warnings in case of OneNAND support
    enabled.

    Although I thinks it's a bit silly to include <linux/mtd/compat.h>
    just for min_t...

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit b1ffecec37b57a59c139042267faac458e5324e9
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Wed Dec 3 23:04:37 2008 -0600

    powerpc: fix io.h build warning with CONFIG_PHYS_64BIT

    Casting a pointer to a phys_addr_t when it's an unsigned long long
    on a 32-bit system without first casting to a non-pointer type
    generates a compiler warning. Fix this.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 16:22:50 2008 +0100

    trab: make trab_fkt standalone code independent of libgcc

    Use our own local functions in lib_arm/ instead.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 14:44:06 2008 +0100

    post/Makefile: fix dependency problem with parallel builds

    Parallel builds (using "make -jN") would occasionally fail with error
    messages like
	ppc_4xxFP-objdump: string.o: File format not recognized
    or
	post/libpost.a(cpu.o): In function `cpu_post_test':
	/home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
    or similar. We now make sure to run the 'postdeps" step before
    attempting to build the specific POST libraries.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 14:41:02 2008 +0100

    Makefile: fix dependency problem with parallel builds

    Parallel builds (using "make -jN") would occasionally fail with error
    messages like
	include/autoconf.mk:212: *** missing separator.  Stop.
    Line numbers and affected boards were changing. Obviously some
    Makefiles included autoconf.mk while it was still being written to.
    As a fix, we now write to a temporary file first and then rename it,
    so that it is really ready to use as soon as it appears.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 16 01:02:17 2008 +0100

    Coding style cleanup, update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Dec 11 18:39:08 2008 -0500

    spi/stmicro: fix debug() display of cmd

    The stmicro_wait_ready() func tries to show the actual opcode that was sent
    to the device, but instead it displays the array pointer.  Fix it to pull
    out the opcode from the start of the array.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Dec 11 06:23:37 2008 -0500

    env_sf: support embedded environments

    If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
    size is larger than the env size, then it means the env is embedded in a
    block.  So we have to save/restore the part of the sector which is not the
    environment.  Previously, saving the environment in SPI flash in this
    setup would probably brick the board as the rest of the sector tends to
    contain actual U-Boot data/code.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
Author: Timur Tabi <timur@freescale.com>
Date:	Wed Dec 3 11:28:30 2008 -0600

    i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions

    All implementations of the functions i2c_reg_read() and
    i2c_reg_write() are identical. We can save space and simplify the
    code by converting these functions into inlines and putting them in
    i2c.h.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit e39cd81c44740d7355d277ed3d38536cbe1e003d
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Dec 5 15:36:14 2008 +0800

    lib_ppc: rework the flush_cache

    - It is possible to miss flush/invalidate the last
      cache line, we fix it at here.
    - add the volatile and memory clobber.

    They are pointed by Scott Wood.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Sat Dec 13 17:20:28 2008 -0600

    Introduce addr_map library

    Add a library that helps in translating between virtual and physical
    addresses.	This library can be useful as a simple means to implement
    map_physmem() and virt_to_phys() for platforms that need functionality
    beyond the simple 1:1 mapping.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 65e43a10631537dcb92c302d36301a12308216c3
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Sat Dec 13 17:20:27 2008 -0600

    Introduce virt_to_phys()

    virt_to_phys() returns the physical address given a virtual. In most
    cases this will be just the input value as the vast majority of
    systems run in a 1:1 mode.

    However in systems that are not running this way it should report the
    physical address or ~0 if no mapping exists for the given virtual
    address.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 45845301af3de8675c1f7bbc815c6de35452605a
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Sun Dec 7 22:12:50 2008 +0100

    POST Make: fix the sub-dir dependencies missing.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
Author: Martin Michlmayr <tbm@cyrius.com>
Date:	Wed Aug 6 14:44:05 2008 +0300

    Fix a typo in fw_env.config

    Reported-by: Martin Michlmayr <tbm@cyrius.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ba490b7761c62b549c222a9723e532dc801a3899
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Dec 1 16:22:45 2008 -0600

    Remove unused CONFIG_ADDR_STREAMING defines

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit d16da93430520d3e46c1ab52eedacf36ab7a2311
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Nov 24 11:54:47 2008 -0600

    cmd_mem: Remove unused variable

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Dec 14 10:29:39 2008 +0100

    Fix new found CFG_

    Also fix some minor typos.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Sep 19 12:07:34 2008 +0200

    Remove compiler warning: target CPU does not support interworking

    This warning is issued by modern ARM-EABI GCC on non-thumb targets.

    Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Nov 24 13:33:51 2008 +0100

    Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent

    FDT support is used for both FIT style images and for architectures
    that can pass a fdt blob to an OS (ppc, m68k, sparc).

    For other architectures and boards which do not pass a fdt blob to an
    OS but want to use the new uImage format, we just need FIT support.

    Now we can have the 4 following configurations :

    1) FIT only		    CONFIG_FIT
    2) fdt blob only	    CONFIG_OF_LIBFDT
    3) both		    CONFIG_OF_LIBFDT & CONFIG_FIT
    4) none		    none

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Wed Dec 10 15:13:32 2008 +0100

    ppc4xx: Disable EEPROM write access on PMC440 boards

    This patch disables EEPROM wrtie access by default on PMC440 board.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Wed Dec 10 15:12:56 2008 +0100

    ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 71fa0714fe5134bc8718c38d5261d267e88582ba
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 18 16:36:12 2008 +0100

    MIPS: Flush data cache upon relocation

    This patch now adds a flush to the data cache upon relocation. The
    current implementation is missing this. Only a comment states that it
    should be done. So let's really do it now.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 44174343688dba32571a34550dba08971c65fef1
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 18 16:36:22 2008 +0100

    MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT

    This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
    enables support for boards where the lowlevel initialization is
    already done when U-Boot runs (e.g. via OnChip ROM).

    This will be used in the upcoming VCTH board support.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 12 13:18:02 2008 +0100

    MIPS: Add board_early_init_f() to init_sequence

    This patch adds the board_early_init_f() call to the MIPS init
    sequence. A weak dummy implementation is also added which can be
    overridden by a board specific version.

    This will be used by the upcoming VCTH board support.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 12 13:18:19 2008 +0100

    MIPS: Add onenand_init() to board.c and move nand_init()

    This patch adds a call to onenand_init() for OneNAND support and moves
    the nand_init() call to an earlier place, so that the environment can
    be used from NAND and OneNAND.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit d8bbc51c7ba9b737a20984333d19fe28a3526431
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Dec 9 11:32:46 2008 +0900

    sh: Update sh2/sh2a timer

    Renesas SH2/SH2A timer broken.
    This patch fix timer function.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit a319f1496210117b73198e3d889ffffaf6825d00
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Dec 5 07:27:37 2008 +0100

    sh: r2dplus fix register access

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Dec 2 07:40:03 2008 +0100

    sh: r2dplus/lowlevel_init: coding style fix

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Nov 25 11:05:19 2008 +0900

    sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT

    SH4 is different a value of CACHE_OC_NUM_ENTRIES and
    CACHE_OC_WAY_SHIFT every CPU.
    This patch corrects these values.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit e9d5f35497885b3c65d494d09a525d443dcccd3b
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Nov 20 16:44:42 2008 +0900

    sh: Update sh timer function

    Change to write/readX function and fix timer problem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit b81786cff476c41e332eaeb679158f6527cd67d4
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Nov 4 11:58:58 2008 +0900

    sh: Migo-R: Update BSC value

    A value of BSC CS4 was wrong, Fixed it.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 5783758fd260a02f44566ad8f29f899565cd0403
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Mon Nov 17 16:52:09 2008 +0900

    sh: Update ms7722se board config

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Mon Nov 17 16:53:09 2008 +0900

    sh: Update SuperH serial driver

    The address of SCFSR register is wrong at SH7720/SH7721.
    This patch fix this.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 9a1d3557dcd47365c12eeab584b822e57d994352
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Nov 11 22:20:15 2008 +0100

    sh: fix rsk7203 and MigoR out of tree build

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 1951f847f0a851853871b613ad7cf21a5242226c
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Wed Dec 10 14:41:25 2008 +0100

    ppc4xx: Update TEXT_BASE for CPCI405 boards

    This patch fixes building U-Boot for CPCI405 boards.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
Author: Stefan Roese <sr@denx.de>
Date:	Tue Dec 9 20:08:01 2008 +0100

    ppc4xx: Remove some features from ALPR to fit into 256k again

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3b089e4f889a2902449d55e081c886ae607cae89
Author: Stefan Roese <sr@denx.de>
Date:	Wed Dec 10 10:32:59 2008 +0100

    UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization

    With this patch we set the type back to NONE upon failing UBI partition
    initialization. Otherwise further calls to the UBI subsystem would try
    to really access the non-existing UBI partition.

    Thanks to Michael Lawnick for pointing this out.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 817329351639a8895cd9b87b33aeff043f3d5a44
Author: Stefan Roese <sr@denx.de>
Date:	Wed Dec 10 10:28:33 2008 +0100

    UBI: Return -ENOMEM upon failing malloc

    Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
    failing malloc().

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Tue Dec 9 23:34:15 2008 -0800

    Fix compile error in building MBX860T.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
Author: Michal Simek <monstr@monstr.eu>
Date:	Tue Nov 25 11:42:20 2008 +0100

    microblaze: Remove XUPV2P board

    ---

    Microblaze platforms use generic settings and to have
    many platforms is confusing that's why I decided to remove this
    platform from U-BOOT. ml401 tree is sufficient for covering
    all Microblaze platforms.

    This change will go through microblaze custodian tree.

commit 99ba6f353582720defff6e6e6761dc455a207d31
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Nov 24 18:25:41 2008 +0100

    microblaze: Remove CONFIG_LIBFDT due to error in common files

commit e7d591e823a991513833af7030468409e25a3b13
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Nov 24 11:43:00 2008 +0100

    microblaze: Fix ml401 uart16550 setting

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Nov 24 11:38:22 2008 +0100

    microblaze: Set up relocation is done

commit bcb6dd9187d4b23c748704767bd12d20c829e996
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Dec 9 23:20:31 2008 -0500

    tools/netconsole: new script for working with netconsole over UDP

    While the doc/README.NetConsole does have a snippet for people to
    create their own netcat script, it's a lot easier to make a simple
    dedicated script and tell people to use it.

    Also spruce it up a bit to make it user friendly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
Author: Sonic Zhang <Sonic.Zhang@analog.com>
Date:	Tue Dec 9 23:20:18 2008 -0500

    fs/fat: handle FAT on SATA

    The FAT file system driver should also handle FAT on SATA devices.

    Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Tue Dec 9 23:26:31 2008 -0800

    Fix compile error in building MBX860T.
    Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date:	Mon Nov 24 08:15:02 2008 -0500

    libfdt: Fix redefined uintptr_t warning for USE_HOSTCC

    Compiling U-Boot in an old OS environment (RedHat-7.3  :-)	gives the
    following warnings from FDT:

    include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
    /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here

    Fix: Protect the definition of uintptr_t when compiling on the host
    system.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sat Nov 22 08:43:29 2008 +1100

    Moved sc520 PCI definitions to stand-alone file

    Signed Off By: Graeme Russ <graeme.russ@gmail.com>

commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sat Nov 22 08:43:21 2008 +1100

    Fixed path to sc520 SSI include file

    Signed Off By: Graeme Russ <graeme.russ@gmail.com>

commit d4f70da544c33db3e4fce6473dea4ecca4322545
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Fri Nov 21 06:28:05 2008 +1100

    Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit c034075a713b60e654c64e88e87da29440f31bb4
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 12 13:30:10 2008 +0100

    serial: Add vcth UART driver

    This patch adds the UART driver for the upcoming VCTH board support.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 142a80ffc3b537a9c45acd2444a42a77f147c602
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Nov 13 19:49:36 2008 +0300

    jffs2: cache data_crc results

    As we moved data_crc() invocation from jffs2_1pass_build_lists() to
    jffs2_1pass_read_inode() data_crc is going to be calculated on each
    inode access. This patch adds caching of data_crc() results. There
    is no significant improvement in speed (because of flash access
    caching added in previous patch I think, crc in RAM is really fast)
    but this patch impacts memory usage -- every b_node structure uses
    12 bytes instead of 8.

    Signed-off-by: Alexey Neyman <avn@emcraft.com>
    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 9b7076229ec6a958bd835ab70745f7676297ce82
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Nov 13 19:49:35 2008 +0300

    jffs2: summary support

    This patch adds support for reading fs information from summary
    node instead of scanning full eraseblock.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 70741004dc28946cd82c7af6789c4ddb3fc94526
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Nov 13 19:49:34 2008 +0300

    jffs2: add buffer to cache flash accesses

    With this patch JFFS2 code allocates memory buffer of max_totlen size
    (size of the largest node, calculated during scan time) and uses it to
    store entire node. Speeds up loading. If malloc fails we use old ways
    to do things.

    Signed-off-by: Alexey Neyman <avn@emcraft.com>
    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 8a36d31f72411144ac0412ee7e1880e801acd754
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Nov 13 19:49:33 2008 +0300

    jffs2: rewrite jffs2 scanning code based on Linux one

    Rewrites jffs2_1pass_build_lists() function in style of Linux's
    jffs2_scan_medium() and jffs2_scan_eraseblock().
    This includes:
     - Caching flash acceses
     - Smart dealing with free space

    Signed-off-by: Alexey Neyman <avn@emcraft.com>
    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Nov 13 19:49:32 2008 +0300

    jffs2: add sector_size field to part_info structure

    This patch adds sector_size field to part_info structure (used
    by new JFFS2 code).

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit f73846956778a7dfee83403ef9747aff77198848
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Thu Nov 13 19:49:31 2008 +0300

    jffs2: fix searching for latest version in jffs2_1pass_list_inodes()

    We need to update i_version inside cycle to find really latest version
    inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
    dump_inode() instead of calling expensive jffs2_1pass_read_inode().

    Signed-off-by: Alexey Neyman <avn@emcraft.com>
    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 9 23:13:51 2008 +0100

    evb64260: fix "cast to pointer from integer of different size" warnings

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d2776827315c3d469b8cb4cec14d58877798daa2
Author: Stefan Althoefer <stefan.althoefer@web.de>
Date:	Sun Dec 7 19:39:11 2008 +0100

    USB: descriptor handling

    Hi,

    I found a bug when working with the u-boot USB subsystem on IXP425 processor
    (big endian Xscale aka ARMv5).
    I recognized that the second usb_endpoint_descriptor of the attached memory
    stick was corrupted.

    The reason for this are the packed structures below (either u-boot and
    u-boot-usb):

    --------------
    /* Endpoint descriptor */
    struct usb_endpoint_descriptor {
	unsigned char  bLength;
	unsigned char  bDescriptorType;
	unsigned char  bEndpointAddress;
	unsigned char  bmAttributes;
	unsigned short wMaxPacketSize;
	unsigned char  bInterval;
	unsigned char  bRefresh;
	unsigned char  bSynchAddress;

    } __attribute__ ((packed));
    /* Interface descriptor */
    struct usb_interface_descriptor {
	unsigned char  bLength;
	unsigned char  bDescriptorType;
	unsigned char  bInterfaceNumber;
	unsigned char  bAlternateSetting;
	unsigned char  bNumEndpoints;
	unsigned char  bInterfaceClass;
	unsigned char  bInterfaceSubClass;
	unsigned char  bInterfaceProtocol;
	unsigned char  iInterface;

	unsigned char  no_of_ep;
	unsigned char  num_altsetting;
	unsigned char  act_altsetting;
	struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
    } __attribute__ ((packed));
    ------------

    As usb_endpoint_descriptor is only 7byte in length, the start of all
    odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
    of these structures also not word aligned.

    ARMv5 Architecture however does not support non-aligned multibyte
    data type (see A2.8 of ARM Architecture Reference Manual).

    Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Dec 9 10:27:33 2008 -0600

    drivers/fsl_pci_init: Fix compile warning

    fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
    fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type

    The check only makes sense if we are CONFIG_PHYS_64BIT

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Dec 7 09:45:35 2008 +0100

    usbtty/omap: update to current API

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
Author: Anatolij Gustschin <agust@denx.de>
Date:	Tue Dec 9 17:52:05 2008 +0100

    video: fix FADS823 and RRvision compiling issues

    Since commit 561858ee building for FADS823 and RRvision
    doesn't work. Let's include version.h and timestamp.h
    unconditionally to fix the problem.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
Author: Stefan Roese <sr@denx.de>
Date:	Tue Dec 2 10:53:47 2008 +0100

    UBI: Fix size parsing in "ubi create"

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
Author: Stefan Roese <sr@denx.de>
Date:	Thu Nov 27 14:07:09 2008 +0100

    UBI: Enable re-initializing of the "ubi part" command

    With this patch now, the user can call "ubi part" multiple times to
    re-connect the UBI device to another MTD partition.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
Author: Stefan Roese <sr@denx.de>
Date:	Thu Nov 27 14:05:15 2008 +0100

    MTD: Fix problem based on non-working relocation (list head mtd_partitions)

    Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
    first call of add_mtd_partitions(). Otherwise this won't work on platforms
    where the relocation is broken (like MIPS or PPC).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
Author: Trent Piepho <tpiepho@freescale.com>
Date:	Wed Nov 12 17:29:48 2008 -0800

    Section name should be ".data", not "data"

    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 9 00:39:08 2008 +0100

    MAKEALL: Automatically use parallel builds

    Add logic to the MAKEALL script to determine the number of CPU cores
    on the system, and run a parallel build if there is more than one.
    Usually this significantrly accelerates builds.

    Allow to manually adjust the number of parallel make jobs by using
    the "BUILD_NCPUS" environment variable.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 268405fa7c44156c5192a70779920c70906af8d6
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 9 00:24:30 2008 +0100

    vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 153176a9414120ca1736f3cc4951623d6e14e6af
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Nov 11 06:08:59 2008 +0100

    avr32/bootm: remove unused variable 'ret'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Nov 12 13:06:48 2008 -0600

    Remove unneeded CONFIG_SHELL references

    Make should be using the bash shell by default which makes
    CONFIG_SHELL unnecessary

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit cf7a7b99794bac936899819b95539be1dbd71708
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Nov 12 12:33:20 2008 -0600

    Use bash for default GNU Make shell application

    Some Make script commands rely on bash-specific features like brace
    expansion, so default to bash for the SHELL variable with a fallback
    to the standard sh shell

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Nov 12 09:50:45 2008 +0100

    jffs2: rename devices_init () in common/jffs2.c

    rename devices_init () in common/jffs2.c to
    jffs2_devices_init (), because there is also a
    devices_init () in common/devices.c.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit af5eb847a10f1037590001355d88bab3fe7be48b
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Mon Nov 10 12:46:20 2008 +0000

    SPARC: Fixed compiler error introduced by commit c160a9544743

    This patch fixes a build error for the SPARC platform. It was
    introduced by commit c160a9544743e80e8889edb2275538e7764ce334.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 4c60259899aa00f59db0d936b8807f9a26411c0f
Author: Gary Jennejohn <garyj@denx.de>
Date:	Sun Nov 9 12:50:59 2008 +0100

    mgsuvd add the board-specific part of the HDLC driver

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
Author: Gary Jennejohn <garyj@denx.de>
Date:	Sun Nov 9 12:45:03 2008 +0100

    mgcoge add the board-specific part of the HDLC driver

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
Author: Gary Jennejohn <garyj@denx.de>
Date:	Sun Nov 9 12:36:15 2008 +0100

    keymile add the common parts of the HDLC driver

    This implements the ICN protocol used across the backplane and is
    needed by all the keymile boards.

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Nov 7 22:46:22 2008 +0100

    drivers/bios_emulator: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Thu Nov 6 14:01:51 2008 -0500

    common/cmd_ide.c: Corrected endian order printing for compact flash serial number.

    Corrected endian order printing for compact flash serial number.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>

commit 16a28ef219c27423a1ef502f19070c4d375079b8
Author: Gary Jennejohn <garyj@denx.de>
Date:	Thu Nov 6 15:04:23 2008 +0100

    IOMUX: Add console multiplexing support.

    Modifications to support console multiplexing.  This is controlled using
    CONFIG_SYS_CONSOLE_MUX in the board configuration file.

    This allows a user to specify multiple console devices in the environment
    with a command like this: setenv stdin serial,nc.  As a result, the user can
    enter text on both the serial and netconsole interfaces.

    All devices - stdin, stdout and stderr - can be set in this manner.

    1) common/iomux.c and include/iomux.h contain the environment setting
    implementation.
    2) doc/README.iomux contains a somewhat more detailed description.
    3) The implementation in (1) is called from common/cmd_nvedit.c to
    handle setenv and from common/console.c to handle initialization of
    input/output devices at boot time.
    4) common/console.c also contains the code needed to poll multiple console
    devices for input and send output to all devices registered for output.
    5) include/common.h includes iomux.h and common/Makefile generates iomux.o
    when CONFIG_SYS_CONSOLE_MUX is set.

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Nov 4 16:03:46 2008 -0500

    strings: use puts() rather than printf()

    When running `strings` on really long strings, the stack tends to get
    smashed due to printf().  Switch to puts() instead since we're only passing
    the data through.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:	Mon Nov 3 22:16:18 2008 +0100

    Use new CONFIG_SYS_VXWORKS parameters for Netstal boards

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>

commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:	Mon Nov 3 22:15:34 2008 +0100

    cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters

    - fix size too small by one in sprintf
    - changed old (pre 2004) device name ibmEmac to emac
    - boot device may be overriden in board config
    - servername may be defined in board config
    - additional parameters may be defined in board config
    - fixed some line wrappings
    - replaced	redundant MAX define by max

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>

commit e9084b23d16102f44ace24379a1c0c352497ef80
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:	Mon Nov 3 22:14:36 2008 +0100

    Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>

commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:	Mon Nov 3 22:13:47 2008 +0100

    README: Document CONFIG_SYS parameters for vxworks

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>

commit ace514837cac656e29c37a19569cb8ea83071126
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Oct 31 11:12:38 2008 -0500

    lcd: Let the board code show board-specific info cleanup

    remove unneeded version.h from lcd.c

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Nov 3 09:30:59 2008 -0600

    Update U-Boot's build timestamp on every compile

    Use the GNU 'date' command to auto-generate a new U-Boot
    timestamp on every compile.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
Author: Remy Bohmer <linux@bohmer.net>
Date:	Thu Dec 4 22:25:57 2008 +0100

    Remove redundant armv4 flag from arm926ejs compile flags

    Currently the arm926ejs tree has the armv4 option set during compilation.
    This flag does not belong here because a arm926 CPU is always a armv5 CPU.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
Author: Nicolas Ferre <nicolas.ferre@atmel.com>
Date:	Sat Dec 6 13:11:14 2008 +0100

    at91: Choose environment variables location within make config target

    This patch adds the possiblity to choose the media where the environment will
    be located. This allow to choose this fundamental configuration without editing
    config files.

    Documentation file added.

    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
    Acked-by: Stelian Pop <stelian@popies.net>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1450c4a6682378567030414a9f1198c39b7730c7
Author: Anatolij Gustschin <agust@denx.de>
Date:	Mon Nov 3 15:30:34 2008 +0100

    lwmon, tqm8xx: Fix build errors

    Commit 6b59e03e0237a40a2305ea385defdfd92000978b
    lcd: Let the board code show board-specific info

    introduced some bugs which prevent U-Boot building
    for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
    be defined in the board configuration.

    Also "LCD enabled" building for TQM823L doesn't work
    since this commit.

    This patch fixes above-mentioned issues.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Nov 2 01:18:18 2008 -0400

    ignore .gdb_history files

    When using gdb, history files will often get generated.  So ignore them.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Oct 31 12:26:55 2008 +0100

    FPGA: move fpga drivers to drivers/fpga

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Dec 1 16:29:38 2008 -0600

    net: Fix TftpStart() ip:filename bug

    The TftpStart() function modifies the 'BootFile'
    string when 'BootFile' contains both an IP address
    and filename (eg 1.2.3.4:/path/file). This causes
    subsequent calls to TftpStart to incorrectly parse
    the TFTP filename and server IP address to use.
    For example:

    => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
    Speed: 100, half duplex
    Using eTSEC1 device
    TFTP from server 10.52.0.62; our IP address is 10.52.253.79
		     ^^^^^^^^^^ CORRECT
    Filename '/home/ptyser/non_existant'.
	      ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
    Load address: 0x100000
    Loading: *
    TFTP error: 'File not found' (1)
    Starting again

    eTSEC2: No link.
    Speed: 100, half duplex
    Using eTSEC1 device
    TFTP from server 10.52.0.33; our IP address is 10.52.253.79
		     ^^^^^^^^^^ WRONG
    Filename '10.52.0.62'.
	      ^^^^^^^^^^ WRONG
    Load address: 0x100000
    Loading: *
    TFTP error: 'File not found' (1)
    Starting again

    TftpStart() was modified to not modify the 'BootFile' string.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d32c5be50bf0600bfdc54223ef341ee9c63db445
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Dec 1 16:26:21 2008 -0600

    net: Add additional IP fragmentation check

    Ignore IP packets which have the "more fragments" flag bit
    set.  This flag indicates the IP packet is fragmented and
    must be ignored by U-Boot.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Dec 1 16:26:20 2008 -0600

    net: Define IP flag field values

    These defines were pulled from the "Add simple
    IP/UDP fragmentation support" patch from Frank
    Haverkamp <haver@vnet.ibm.com>.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 23afaba65ec5206757e589ef334a8b38168c045f
Author: Anatolij Gustschin <agust@denx.de>
Date:	Tue Dec 2 10:31:04 2008 +0100

    net: tsec: Fix Marvell 88E1121R phy init

    This patch tries to ensure that phy interrupt pin
    won't be asserted after booting. We experienced
    following issues with current 88E1121R phy init:

    Marvell 88E1121R phy can be hardware-configured
    to share MDC/MDIO and interrupt pins for both ports
    P0 and P1 (e.g. as configured on socrates board).
    Port 0 interrupt pin will be shared by both ports
    in such configuration. After booting Linux and
    configuring eth0 interface, port 0 phy interrupts
    are enabled. After rebooting without proper eth0
    interface shutdown port 0 phy interrupts remain
    enabled so any change on port 0 (link status, etc.)
    cause assertion of the interrupt. Now booting Linux
    and configuring eth1 interface will cause permanent
    phy interrupt storm as the registered phy 1 interrupt
    handler doesn't acknowledge phy 0 interrupts. This
    of course should be fixed in Linux driver too.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>
    Acked-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Dec 2 12:59:51 2008 -0600

    net: Fix download command parsing

    When CONFIG_SYS_HUSH_PARSER is defined network download
    commands with 1 argument in the format 'tftp "/path/file"'
    do not work as expected. The hush command parser strips
    the quotes from "/path/file" which causes the network
    commands to interpret "/path/file" as an address
    instead of the intended filename.

    The previous check for a leading quote in netboot_common()
    was replaced with a check which ensures only valid
    numbers are treated as addresses.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3c2c2f427905040c1513d0c51d637689cba48346
Author: Remy Bohmer <linux@bohmer.net>
Date:	Thu Nov 27 22:30:27 2008 +0100

    Remove non-ascii characters from fat code

    This code contains some non-ascii characters in comment lines and code.
    Most editors do not display those characters properly and editing those
    files results always in diffs at these places which are usually not required
    to be changed at all. This is error prone.

    So, remove those weird characters and replace them by normal C-style
    equivalents for which the proper defines were already in the header.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit dc889e865356497d3e495570118c2245ebce2631
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 28 20:16:58 2008 +0800

    85xx: fix the wrong DDR settings for MPC8572DS

    The default DDR freq is 400MHz or 800M data rate,
    the old settings is pure wrong for the default case.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 9df59533f77de2829b4b66e5b7620e04edaa391c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Nov 24 10:29:26 2008 -0600

    85xx: init gd as early as possible

    Moved up the initialization of GD so C code like set_tlb() can use
    gd->flags to determine if we've relocated or not in the future.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit aed461af81012a398a205e9be67ab37667491838
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Nov 24 10:29:25 2008 -0600

    85xx: Fix relocation of CCSRBAR

    If the virtual address for CCSRBAR is the same after relocation but
    the physical address is changing we'd end up having two TLB entries with
    the same VA.  Instead we new us the new CCSRBAR virt address + 4k as a
    temp virt address to access the old CCSRBAR to relocate it.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit ea154a1781135d822eedee7567cc156089eae93c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Nov 24 10:25:14 2008 -0600

    FSL: Moved BR_PHYS_ADDR for localbus to common header

    The BR_PHYS_ADDR macro is useful on all machines that have local bus
    which is pretty much all 83xx/85xx/86xx chips.

    Additionally most 85xx & 86xx will need it if they want to support
    36-bit physical addresses.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Dec 1 13:47:12 2008 -0600

    85xx: Add PORDEVSR_PCI1 define

    Add define used to determine if PCI1 interface is in PCI or PCIX mode.

    Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Nov 21 19:24:22 2008 -0600

    drivers/fsl_pci_init: Fix inbound window mapping bug

    The current code will cause the creation of a 4GB window
    starting at 0 if we have more than 4GB of RAM installed,
    which overlaps with PCI_MEM space and causes pci_bus_to_phys()
    to return erroneous information. Limit the size to 4GB - 1;
    which causes the code to create one 2GB and one 1GB window
    instead.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Nov 20 15:36:48 2008 -0600

    Removed unused CONFIG_L1_INIT_RAM symbol.

    Prevent further viral propogation of the unused
    symbol CONFIG_L1_INIT_RAM by just removing it.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 7008d26a40a76f90cae5824c812cfed449fb97b8
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Wed Oct 29 09:21:44 2008 -0500

    fsl ddr skip interleaving if not supported.

    Removed while(1) hang if memctl_intlv_ctl is set wrong.
    Remove embedded tabs from strings.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit dd332e18d082de75eca3fc2c7c778f5d4571a096
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Nov 13 18:08:57 2008 +0100

    85xx: socrates: fix DDR SDRAM tlb entry configuration

    since commit be0bd8234b9777ecd63c4c686f72af070d886517
    tlb entry for socrates DDR SDRAM will be reconfigured
    by setup_ddr_tlbs() from initdram() causing an
    inconsistency with previously configured DDR SDRAM tlb
    entry from tlb_table:

    socrates>l2cam 7 9
    IDX  PID	  EPN  SIZE V TS	   RPN U0-U3 WIMGE UUUSSS
      7 : 00 00000000 256MB V  0 -> 0_00000000	0000 -I-G- ---RWX
      8 : 00 00000000 256MB V  0 -> 0_00000000	0000 ----- ---RWX
      9 : 00 10000000 256MB V  0 -> 0_10000000	0000 ----- ---RWX

    This patch makes the presence of the DDR SDRAM tlb entry in
    the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
    inconsistency.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Nov 11 10:17:10 2008 -0600

    85xx: Add CPU 2 errata workaround to all 8548 boards

    All mpc8548-based boards should implement the suggested workaround
    to CPU 2 errata. Without the workaround, its possible for the
    8548's core to hang while executing a msync or mbar 0 instruction
    and a snoopable transaction from an I/O master tagged to make
    quick forward progress is present.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit e57f0fa1333cdf3ca36110aac2900712a5f82976
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:53:45 2008 +0800

    85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case

    we need TLB entry for DDR at !SPD case.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:53:38 2008 +0800

    85xx: remove the unused ddr_enable_ecc in the board file

    The DDR controller of 8548/8544/8568/8572/8536 processors
    have the ECC data init feature, and the new DDR code is
    using the feature, and we don't need the way with DMA to
    init memory any more.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 4a129a57d923f7c15aa1f567028a80a32d66a100
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Nov 30 19:36:53 2008 +0100

    at91rm9200dk: Fix typo

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Nov 30 19:36:50 2008 +0100

    AT91: remove non supported board AT91RM9200DF macro

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit bd876772ee04095e5dd943d97515a1f14bad4b1c
Author: Ilko Iliev <iliev@ronetix.at>
Date:	Tue Dec 2 17:27:54 2008 +0100

    mtd/dataflash.c: fix a problem with the last partition

    This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
    partition can be defined to use the area to the end of dataflash size.
    Now it is possible to have only one dataflash partition from 0 to the end
    of of dataflash size.

    Signed-off-by: Ilko Iliev <iliev@ronetix.at>

commit 03f797793b124dccaae145b977d15d6cb9e74504
Author: Ilko Iliev <iliev@ronetix.at>
Date:	Tue Dec 2 17:20:17 2008 +0100

    fix some coding style violations.

    This patch fix some coding style violations.

    Signed-off-by: Ilko Iliev <iliev@ronetix.at>

commit 5e46b1e54112f4b7fd5185665e571510132c12a7
Author: Stefan Roese <sr@denx.de>
Date:	Thu Nov 27 14:11:37 2008 +0100

    OneNAND: Add missing mtd info struct before calling onenand_erase()

    Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
    for use in UBI) via CONFIG_MTD_PARTITIONS.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 29382d4064fbaff5daacff4c3209370fa5713966
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu Nov 20 16:43:52 2008 -0600

    mpc8641: Fix error in README

    I made some updates to the code that didn't make it into the
    README - fix this

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 801a194616d95e6fc426a176d9615ccbf9876c7f
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Nov 20 12:01:02 2008 -0600

    Removed unused CONFIG_L1_INIT_RAM symbol.

    Prevent further viral propogation of the unused
    symbol CONFIG_L1_INIT_RAM by just removing it.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit f698738e46cb461e28c2d58228bb34a2fcf5a475
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Nov 20 14:02:56 2008 -0600

    86xx: Fix non-64-bit compilation problems.

    Introducing 64-bit (36-bit) support for the MPC8641HPCN
    failed to accomodate the other two 86xx boards.
    Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
    CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
    with nominal 32-bit values.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Acked-by: Becky Bruce <becky.bruce@freescale.com>

commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Wed Nov 26 17:40:37 2008 +0100

    Remove obsolete command (apply afte USB style patch, 80 chars strict)

    Remove USB obsolete commmand

    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit de39f8c19d7c12017248c49d432dcb81db68f724
Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Date:	Wed Nov 26 17:41:34 2008 +0100

    USB style patch, 80 chars strict

    USB Code style patch

    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit d10c5a87cb8affbb4d35a311370316d4383d598e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Nov 7 22:46:21 2008 +0100

    drivers/usb: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Remy Böhmer <linux@bohmer.net>

commit 2077e348c2a84901022ad95311b47b70361e6daa
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Nov 25 10:47:02 2008 -0600

    NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().

    This caused the operation to be needlessly repeated if there were
    no bad blocks and no errors.

    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 89295028e7d8f7a524f485328279d72fdb102385
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Nov 24 12:09:50 2008 +0100

    ppc4xx: ml300 remove Xilinx BSP from ml300 folder

    This BSP should be outside u-boot source tree.
    The second reason is that xilinx ppc405 was moved to generic platform.

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 24eea623d4974a169026a975ba12fb23d48154b1
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Nov 24 15:11:10 2008 +0100

    ppc4xx: Remove unused features

    This patch disables some unused features from the PCI405 configuration
    to keep U-Boot image size below 192k.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Nov 24 15:11:09 2008 +0100

    ppc4xx: Use correct io accessors for PCI405

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 348c849d86a6f0785752b9bc497a34658713d1d1
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Nov 24 15:11:08 2008 +0100

    ppc4xx: Remove unused code from PCI405 code

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Nov 20 09:59:09 2008 +0100

    powerpc, keymile boards: extract identical config options

    This patch extracts the identical config options for the
    keymile boards mgcoge, mgsuvd and kmeter1 in a new
    common config file keymile-common.h.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Nov 21 08:29:40 2008 +0100

    powerpc: keymile: Add a check for the PIGGY debug board

    Check the presence of the PIGGY on the keymile boards mgcoge,
    mgsuvd and kmeter1. If the PIGGY is not present, dont register
    this Ethernet device.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 58c696eed839af894e0265064669c402dc28b371
Author: Wolfgang Denk <wd@xpert.denx.de>
Date:	Mon Nov 24 21:50:59 2008 +0100

    AT91RM9200DK: fix broken boot from NOR flash

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 8052352f20b33bef8f9872fc983eac73d4693c38
Author: Jens Scharsig <esw@bus-elektronik.de>
Date:	Tue Nov 18 10:48:46 2008 +0100

    at91rm9200: fix broken boot from nor flash

    This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
    CONFIG_AT91RM9200 is defined and nor preloader is used.

    Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>

commit 25ea652e907516a283b38237e83712a918f125d7
Author: Piotr Ziecik <kosmo@semihalf.com>
Date:	Mon Nov 17 15:58:00 2008 +0100

    UBI: Add proof-of-concept CFI flash support

    With this patch UBI can be used on CFI flash chips.

    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit e6a7edbc1778d27431ac663b40a71dafa5d20578
Author: Piotr Ziecik <kosmo@semihalf.com>
Date:	Mon Nov 17 15:57:59 2008 +0100

    mtd: Remove a printf() from add_mtd_device().

    Remove a printf() from add_mtd_device(), which produces spurious output.

    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 91809ed51d8327a8dbbf29aa98a091154c282171
Author: Piotr Ziecik <kosmo@semihalf.com>
Date:	Mon Nov 17 15:57:58 2008 +0100

    cfi-mtd: Add cfi-mtd driver.

    Add cfi-mtd driver, which exports CFI flash to MTD layer.
    This allows CFI flash devices to be used from MTD layer.

    Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
    option. Initialization is done by calling cfi_mtd_init() from
    flash_init().

    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
Author: Piotr Ziecik <kosmo@semihalf.com>
Date:	Mon Nov 17 15:49:32 2008 +0100

    cfi_flash: Add interface for flash verbosity control

    Add interface for flash verbosity control. It allows
    to disable output from low-level flash API. It is useful
    when calling these low-level functions from context other
    than flash commands (for example the MTD/CFI interface
    implmentation).

    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
Author: Piotr Ziecik <kosmo@semihalf.com>
Date:	Thu Nov 20 15:17:38 2008 +0100

    cfi_flash: Export flash_sector_size() function.

    Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
    so that it can be used in the upcoming cfi-mtd driver.

    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 17 14:45:22 2008 +0100

    cfi_flash: Make all flash access functions weak

    This patch defines all flash access functions as weak so that
    they can be overridden by board specific versions.

    This will be used by the upcoming VCTH board support where the NOR
    FLASH unfortunately can't be accessed memory-mapped. Special
    accessor functions are needed here.

    To enable this weak functions you need to define
    CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
    Otherwise the "old" default functions will be used resulting
    in smaller code.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit a5c4067017631d903e1afa6ad615f0ce19fea517
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 24 08:31:16 2008 +0100

    UBI: Change parsing of size in commands to default to hex

    Currently the size parameters of the UBI commands (e.g. "ubi write") are
    decoded as decimal instead of hex as default. This patch now interprets
    all these values consistantly as hex, as all other standard U-Boot commands
    do.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
Author: Stefan Roese <sr@denx.de>
Date:	Fri Nov 21 13:06:06 2008 +0100

    ppc4xx: ML2 shouldn't include the 4xx EMAC driver

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Fri Nov 14 16:19:19 2008 +0300

    ppc4xx: katmai: Change default config

     This patch enables support for EXT2, and increases the
    CONFIG_SYS_BOOTMAPSZ size for the default configuration
    of the katmai boards to use them as the RAID-reference
    AMCC setups.

     EXT2 enabling allows one to boot kernels from the EXT2
    formatted Compact Flash cards.

     CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
    Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
    the memory area with DTB file (which is placed at the
    end of the bootmap area) will turn out to be overlapped
    with the BSS segment of the 256KB kernel, and zeroed
    in early_init() of Linux.

     Actually, increasing of the bootmap size could be done
    via setting of the bootm_size U-Boot variable, but it looks
    like the current U-Boot implementation have some bootm_size-
    related functionality lost. In many places through the U-Boot
    code the CONFIG_SYS_BOOTMAPSZ definition is used directly
    (instead of trying to read the corresponding value from the
    environment). The same is truth for the boot_jump_linux()
    function in lib_ppc/bootm.c, where U-Boot transfers control
    to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
    value to the booting kernel.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
Author: Dave Mitchell <dmitch71@gmail.com>
Date:	Thu Nov 20 14:09:50 2008 -0600

    ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization

    Expanded OCM TLB to allow access to 64K OCM as well as 256K of
    internal SRAM.

    Adjusted internal SRAM initialization to match updated user
    manual recommendation.

    OCM & ISRAM are now mapped as follows:
	    physical	    virtual	    size
    ISRAM   0x4_0000_0000   0xE300_0000     256k
    OCM     0x4_0004_0000   0xE304_0000     64k

    A single TLB was used for this mapping.

    Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b14ca4b61a681f75f3125676e09d7ce6af66e927
Author: Dave Mitchell <dmitch71@gmail.com>
Date:	Thu Nov 20 14:00:49 2008 -0600

    ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs

    Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
    L2 cache DCRs from ppc440.h to this new header.

    Also converted these DCR defines from lowercase to uppercase and
    modified referencing modules to use them.

    Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 711e2b2af820d21d9931d4cf8057d3894600fd54
Author: Steven A. Falco <sfalco@harris.com>
Date:	Thu Nov 20 14:37:57 2008 -0500

    ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h

    The definitions of bits in SDR_CFG are incorrect, and not used within
    U-Boot.  Therefore, they can be removed.

    The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
    and are unused, so they can be removed too.

    A definition for SDR0_DDRCFG is added.

    Signed-off-by: Steven A. Falco <sfalco@harris.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit e23c7c95a96eb0f068efe5c532215a10a1512a95
Author: Dirk Behme <dirk.behme@gmail.com>
Date:	Mon Nov 10 20:15:25 2008 +0100

    ARM: OMAP: Convert IO macros

    Convert IO macros to readx/writex.

    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>

commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
Author: Ilko Iliev <iliev@ronetix.at>
Date:	Sun Nov 9 15:53:14 2008 +0100

    lib_arm: do_bootm_linux() - correct a small mistake

    This patch corrects a small bug in the "if" condition:
    the parameter "flag" is 0 and the "if" condition is always true.
    The result is - the boom command doesn't start the kernel.
    Affected targets: all arm based.

    Signed-off-by: Ilko Iliev <iliev@ronetix.at>

commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
Author: Stelian Pop <stelian@popies.net>
Date:	Sun Nov 9 00:14:46 2008 +0100

    AT91: Enable PLLB for USB

    At least some (old ?) versions of the AT91Bootstrap do not set up the
    PLLB correctly to 48 MHz in order to make USB host function correctly.

    This patch sets up the PLLB to the same values Linux uses, and makes USB
    work ok on the following CPUs:
	- AT91CAP9
	- AT91SAM9260
	- AT91SAM9263

    This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
    the relevant AT91CAP9/AT91SAM9 atmel boards.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
Author: Stelian Pop <stelian@popies.net>
Date:	Fri Nov 7 13:55:14 2008 +0100

    AT91: Use AT91_CPU_CLOCK in displays

    Introduce AT91_CPU_CLOCK and use it for displaying the CPU
    speed in the LCD driver.

    Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
    corresponding board clocks.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit fed36ac5ae613773b6cd90e61e292c45440e10c8
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Nov 20 09:57:47 2008 +0100

    powerpc: 83xx: add support for the kmeter1 board

    This patch adds support for the kmeter1 board from Keymile,
    based on a Freescale MPC8360 CPU.

    - serial console on UART 1
    - 256 MB DDR2 RAM
    - 64 MB NOR Flash
    - Ethernet RMII Mode over UCC4
    - PHY SMSC LAN8700

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
Author: Stefan Roese <sr@denx.de>
Date:	Thu Nov 20 11:46:20 2008 +0100

    ppc4xx: Clear all potentially pending exceptions in MCSR

    This is needed on Canyonlands which still has an exception pending
    while running relocate_code(). This leads to a failure after trap_init()
    is moved to the top of board_init_r().

    Signed-off-by: Stefan Roese <sr@denx.de>

commit facdad5f2602e899a01746916beddbf9e856b5ee
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Nov 19 10:10:30 2008 +0100

    powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
Author: Howard Gregory <Greg.Howard@freescale.com>
Date:	Tue Nov 4 14:55:33 2008 +0800

    mpc83xx: Improve the performance of DDR memory

    modify the CAS timings. my understanding is that these
    settings decrease various wait times in the DDR interface.
    Because these wait times are in clock cycles, and the DDR
    clock on the 8315 RDB runs slower than on some other 83xx
    platforms, we can dial down these values without a problem,
    thereby decreasing the latency of memory a little.

    Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 8000b086b33a5a81f3f390f37e178db7956dc08b
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Fri Oct 24 14:55:33 2008 +0200

    ARM: Add Apollon UBI support

    To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
    macro.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 694a0b3f1c0accd0de94b89555155d69f8022824
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 11:47:05 2008 +0100

    UBI: Add UBI command support

    This patch adds these UBI commands:

    ubi part [nand|onenand] [part] - Show or set current partition
    ubi info [l[ayout]] -Display volume and UBI layout information
    ubi create[vol] volume [size] [type] - Create volume name with size
    ubi write[vol] address volume size - Write volume from address with size
    ubi read[vol] address volume [size] - Read volume to address with size
    ubi remove[vol] volume - Remove volume

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 58be3a1056d88c6d05f3e914389282807e69923a
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:38:24 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 8/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:36:36 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 7/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:32:36 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 6/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c91a719daa331b5856109313371e4ece5ec06d96
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:28:06 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 5/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:27:23 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 4/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:26:54 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 3/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 961df83361aff9a14f226214224eb8a06e05ba24
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:25:44 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 2/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f399d4a281713d5ef2d764f05d545fe61e3bd569
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:23:06 2008 +0100

    UBI: Add basic UBI support to U-Boot (Part 1/8)

    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
    It's based on the Linux UBI version and basically has a "OS"
    translation wrapper that defines most Linux specific calls
    (spin_lock() etc.) into no-ops. Some source code parts have been
    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
    this version with the Linux version and simplifies future UBI
    ports/bug-fixes from the Linux version.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date:	Wed Nov 19 16:20:36 2008 +0100

    MTD: Add MTD paritioning infrastructure

    This MTD part infrastructure will be used by the upcoming
    UBI support.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9b827cf1720acda2473afa516956eab6f7cca9a1
Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Date:	Thu Oct 16 22:54:03 2008 +0530

    Align end of bss by 4 bytes

    Most of the bss initialization loop increments 4 bytes
    at a time. And the loop end is checked for an 'equal'
    condition. Make the bss end address aligned by 4, so
    that the loop will end as expected.

    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3f510db522d160179dff3ddcce9b18f6241c2c24
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Nov 10 19:45:35 2008 -0600

    mpc8641: fix address-cells default in old .dts detection

    address-cells defaults to 2, not 1; so in the unlikely
    event that it isn't specified, this patch is required
    for correct operation.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Oct 31 17:14:39 2008 -0500

    lib_ppc: Move trap_init to occur earlier

    Doing trap_init immediately once we're running from RAM
    means we're no longer dependent on the physical location of
    the flash on non-BookE platforms. Before trap_init, those
    platforms switch to real mode and go to 0xfff00100 on exception.
    After the switch, they go to 0x00000100  This makes it easier to
    move the flash location.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit d52082b12c6e545705a19433a2f4142526536189
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Nov 7 13:46:19 2008 -0600

    mpc8641: Try to detect old .dts files

    Since we've changed the memory map of the board, be nice and
    add some checking to try to catch out-of-date .dts files.  We do
    this by checking the CCSRBAR location in the .dts and comparing
    it to the CCSRBAR location in u-boot.  If they don't match, a
    warning msg is printed.  This isn't foolproof, but it's simple and
    will catch most of the cases where an out-of-date .dts is present,
    including all of the cases where a new u-boot is used with an old
    standard MPC8641 .dts file as supplied with Linux.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 8db0400a27839f91c047dcb83f4a0f09e054a180
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu Nov 6 13:04:09 2008 -0600

    toplevel Makefile: Add MPC8641HPCN_36BIT target

    This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 3111d32c494e8251b90917447796a7206b757e1e
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu Nov 6 17:37:35 2008 -0600

    mpc8641: Support 36-bit physical addressing

    This patch creates a memory map with all the devices
    in 36-bit physical space, in addition to the 32-bit map.
    The CCSR relocation is moved (again, sorry) to
    allow for the physical address to be 36 bits - this
    requires translation to be enabled.  With 36-bit physical
    addressing enabled, we are no longer running with VA=PA
    translations.  This means we have to distinguish between
    the two in the config file.  The existing region name is
    used to indicate the virtual address, and a _PHYS variety
    is created to represent the physical address.

    Large physical addressing is not enabled by default.
    Set CONFIG_PHYS_64BIT in the config file to turn this on.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit c759a01a0022de9378a3a761f49786f87684c916
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu Nov 6 17:36:04 2008 -0600

    mpc8641: Change 32-bit memory map

    The memory map on the 8641hpcn is modified to look more like
    the 85xx boards; this is a step towards a more standardized
    layout going forward. As part of this change, we now relocate
    the flash.

    The regions for some of the mappings were far larger than they
    needed to be.  I have reduced the mappings to match the
    actual sizes supported by the hardware.

    In addition I have removed the comments at the head
    of the BAT blocks in the config file, rather than updating
    them.  These get horribly out of date, and it's a simple
    matter to look at the defines to see what they are set to
    since everything is right here in the same file.

    Documentation has been changed to reflect the new map, as this
    change is user visible, and affects the OS which runs post-uboot.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit bf9a8c34309ed9276258295db9e9212aabb2531a
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:35 2008 -0600

    mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY

    We define CONFIG_MONITOR_BASE_EARLY to define the initial location
    of the bootpage in flash.	Use this to create an early mapping
    definition for the FLASH, and change the early_bats code to use this.

    This  change facilitates the relocation of the flash since the early
    mappings are no longer tied to the final location of the flash.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:34 2008 -0600

    mpc86xx: Use SRR0/1/rfi to enable address translation, not blr

    Using a mtmsr/blr means that you have to be executing at the
    same virtual address once you enable translation.  This is
    unnecessarily restrictive, and is not really how this is
    usually done.  Change it to use the more common mtspr SRR0/SRR1
    and rfi method.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 6bf98b1362f0cb237620355ed3e6762fff82388d
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:33 2008 -0600

    mpc8641: make DIAG_ADDR == FLASH_BASE

    Currently, that's what it is, but it's hardcoded.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:32 2008 -0600

    mpc8641: Drop imaginary second flash bank, map 8MB

    There's a lot of setup and foo for the second flash
    bank.  The problem is, this board doesn't actually have one.
    Clean this up.  Also, the flash is 8M in size.  Get rid
    of the confusing aliased overmapping, and just map 8M.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:31 2008 -0600

    mpc8641: only define CONFIG_ENV_SIZE once

    It's currently defined twice inside in an if/else block, but
    both halves set the same value.  Move the define outside
    the if.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:30 2008 -0600

    mpc86xx: Move setup_bats into cpu_init_f

    In order to later allow for a physical relocation of the
    flash, setup_bats, which sets up the final BAT mapping
    for the board, needs to happen *after* init_laws().
    Otherwise, there will be no window programmed for the flash
    at the new physical location at the point when we change
    the mmu translation.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Nov 5 14:55:29 2008 -0600

    mpc8641: Remove extra "0" from BR2 define

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date:	Thu Oct 23 09:08:18 2008 -0400

    drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.

    Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
    This adds support for PHY-less MAC connections to the UEC.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Oct 23 16:27:24 2008 +0000

    ColdFire: Add mii driver in drivers/net

    All CF platforms' mii.c are consolidated into one

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 25a859066b3af1070eb69f12022113c0a91bd813
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Mon Oct 27 23:53:17 2008 -0700

    Moved initialization of PPC4xx EMAC to cpu_eth_init()

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Nov 9 21:29:23 2008 -0800

    Moved PPC4xx EMAC driver to drivers/net

    Also changed path in all linker scripts that reference this driver

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit 96e21f86e8266ed40759e5495ee461265d7f6d28
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Mon Oct 27 23:50:15 2008 -0700

    Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC

    All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Thu Oct 23 22:02:49 2008 -0700

    Moved initialization of MPC8XX SCC to cpu_eth_init()

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit a9bec96d6359ac9f90a852962bf3040cad9e0256
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Wed Oct 22 23:47:51 2008 -0700

    Moved initialization of MPC8220 FEC to cpu_eth_init()

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Wed Oct 22 23:32:48 2008 -0700

    Moved initialization of QE Ethernet controller to cpu_eth_init()

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3456a148276d5494b53ee40242efb6462d163504
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Wed Oct 22 23:20:29 2008 -0700

    Moved initialization of FCC Ethernet controller to cpu_eth_init

    Affected boards:
	Several MPC8xx boards
	Several MPC8260/MPC8272 boards
	Several MPC85xx boards

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 62e15b497f5c6334c059512678c8db7940ae4c61
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Thu Oct 30 22:15:35 2008 -0700

    Fix typo in cpu/mpc85xx/cpu.c

    CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sun Oct 19 12:08:50 2008 +0900

    net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init

    This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
    as a part of ongoing eth_initialize cleanup work.  The function ret value
    is also fixed as it should be negative on fail.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Fri Sep 5 01:55:22 2008 -0400

    Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()

    Also, removed the driver initialization from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit f2a7806fc23e82d30c8548911369e0c530607354
Author: Clive Stubbings <uboot@xentech.co.uk>
Date:	Mon Oct 27 15:05:00 2008 +0000

    xilinx_emaclite buffer overrun

    Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
    PKTSIZE_ALIGN bytes long.

    Acked-by: Michal Simek <monstr@monstr.eu>

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 0115b1953718a2969f6469d3d5da51ba11e12d42
Author: richardretanubun <richardretanubun@ruggedcom.com>
Date:	Fri Sep 26 08:59:12 2008 -0400

    NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.

    The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
    This patch makes these function use the devname argument that is passed in to
    allow access to the phy registers of other devices in devlist[].

    Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
Author: richardretanubun <richardretanubun@ruggedcom.com>
Date:	Mon Oct 6 15:31:43 2008 -0400

    Adds two more ethernet interface to 83xx

    Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
Author: Stelian Pop <stelian@popies.net>
Date:	Fri Nov 7 13:54:31 2008 +0100

    AT91: Replace AT91_BASE_EMAC by the board specific values.

    AT91_BASE_EMAC is never used outside the board specific files,
    so replace its usage by the board specific AT91xxx_BASE_EMAC.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c91e17affa175ce06afa89b04752301eb4a61666
Author: Stelian Pop <stelian@popies.net>
Date:	Fri Nov 7 12:09:21 2008 +0100

    AT91: Replace (undefined) AT91_ID_US* by the board specific values.

    AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
    Since they are never used outside the board specific files, they can
    be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
    AT91xxx_ID_US2.

    Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Nov 1 10:47:59 2008 +0100

    Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1079432e04ccf71aa3684181186182cd63512f19
Author: Sergey Lapin <slapin@ossfans.org>
Date:	Fri Oct 31 12:28:43 2008 +0100

    Custom AFEB9260 board support

    This patch provides support for AFEB9260 board, a product of
    OpenSource hardware and software. Some commertial projects
    are made with this design. A board is basically AT91SAM9260-EK
    with some modifications and different peripherals and different
    parts used. Main purpose of this project is to gain experience in
    hardware design.
    More info: http://groups.google.com/group/arm9fpga-evolution-board
    (In Russian only, sorry).
    Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb

    Signed-off-by: Sergey Lapin <slapin@ossfans.org>

commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
Date:	Tue Oct 21 13:17:16 2008 +0900

    Change to use "do_div" macro

    Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>

commit e352495318d8056a00faa21b633b3e4374bfbf52
Author: Roman Mashak <romez777@gmail.com>
Date:	Wed Oct 22 16:00:26 2008 -0400

    ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory

    OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
    It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap

    Signed-off-by: Roman Mashak <romez777@gmail.com>

commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
Author: Roman Mashak <romez777@gmail.com>
Date:	Tue Oct 21 03:01:41 2008 -0700

    ARM/Versatile port: Removed unused functions

    Removal of never used functions.

    Signed-off-by: Roman Mashak <romez777@gmail.com>

commit 1266df887781c779deaf6d05eea2ef90a470cb34
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Nov 3 15:44:01 2008 -0600

    powerpc: change 86xx SMP boot method

    We put the bootpg for the secondary cpus into memory and use
    BPTR to get to it.	This is a step towards converting to the
    ePAPR boot methodology.  Also, the code is written to
    deal properly with more than 4GB of RAM.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Oct 31 17:13:49 2008 -0500

    8641HPCN: Config file cleanup

    There are several items in the config file that were hardcoded
    but that should really be based on other config options, since
    the regions are contiguous and depend on being so.	This cleans
    that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
    addresses into the proper format for BR registers.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Oct 31 17:13:32 2008 -0500

    86xx: Make dram_size a phys_size_t

    It's currently a long and should be phys_size_t.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 104992fc541302a6bac74448e01e7fdad20abca0
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Sun Nov 2 18:19:32 2008 -0600

    powerpc 86xx: Handle CCSR relocation earlier

    Currently, the CCSR gets relocated while translation is
    enabled, meaning we need 2 BAT translations to get to both the
    old location and the new location.	Also, the DEFAULT
    CCSR location has a dependency on the BAT that maps the
    FLASH region.  Moving the relocation removes this unnecessary
    dependency. This makes it easier and more intutive to
    modify the board's memory map.

    Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
    BAT for CCSR space.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Oct 31 17:14:14 2008 -0500

    mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build

    You can't actually have both, and with some coming changes to
    change the memory map for the board and support 36-bit physical,
    we need the extra BAT that is being consumed by having both.

    I also make non-PCI configs build cleanly, for the sake of sanity.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri Oct 31 17:14:00 2008 -0500

    mpc8641: Stop supporting non-PCI_PNP configs

    We don't actually ever do this, remove the code so we
    can stop maintaining it.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Fri Oct 24 12:59:12 2008 +0000

    ColdFire: Fix M5329EVB and M5373EVB nand issue

    Fix compilation issue caused by a few mismatches.
    Provide proper nand chip select enable/disable in
    nand_hwcontrol() rather than in board_nand_init()
    just enable once. Remove redundant local nand driver
    functions - nand_read_byte(), nand_write_byte() and
    nand_dev_ready() to use common nand driver.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 1b2708442224a551a0b865b52710306333888932
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Oct 22 11:55:30 2008 +0000

    ColdFire: Fix compilation error

    The error was caused by the change for strmhz() in cpu.c.
    A few of them were one extra close parenthesis.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 536e7dac16769954915a484e682a2efb28699133
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Oct 22 11:38:21 2008 +0000

    ColdFire: Add MCF5301x CPU and M53017EVB support

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit a21d0c2cc9add8894d971ab791f4032f077db817
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Oct 21 15:37:02 2008 +0000

    ColdFire: Add SBF support for M52277EVB

    Add serial boot support

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit b202816c61042c183fe67d097a5893b0f2dafba0
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Oct 21 14:19:26 2008 +0000

    ColdFire: Use CFI driver for M5272C3

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Oct 21 13:47:54 2008 +0000

    ColdFire: Relocate FEC's GPIO and mii functions protocols

    Place FEC pin assignments in cpu_init.c from platform's
    mii.c

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Oct 21 12:15:44 2008 +0000

    ColdFire: Remove platforms mii.c file

    Will use mcfmii.c driver in drivers/net rather than
    keep creating new mii.c for each future platform.
    Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
    M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
    M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
    mii.c

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 012522fef3b382469125beb46a315ab4dee02fb0
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Oct 21 10:03:07 2008 +0000

    ColdFire: Modules header files cleanup

    Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
    MDHA, SKHA, INTC, and FlexBus structures and
    definitions in immap_5xxx.h to more unify modules
    header files. Append DSPI support for m547x_8x.
    SSI cleanup. Remove USB Host structure from immap_539.h.
    Apply changes to use FlexBus structures in mcf52x2's
    cpu_init.c and platform configuration files.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Oct 21 08:52:36 2008 +0000

    ColdFire: Remove linker file

    Each different build for M54455EVB and M5235EVB will
    create a u-boot.lds linker file. It is redundant to
    keep the u-boot.lds

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 0829323073c505556ed5f5073f91adb504584d45
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Oct 31 11:26:44 2008 -0500

    ppc: Fix compile warnings when !CONFIG_OF_LIBFDT

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a80b21d5127583171d6e9bc7f722947641898012
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Oct 31 12:12:12 2008 +0100

    common/Makefile: create others group for non core, environment and command files

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Oct 31 01:13:37 2008 +0100

    TQM8260: use CFI flash driver instead of custom driver.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
Author: Andy Fleming <afleming@freescale.com>
Date:	Thu Oct 30 17:35:30 2008 -0500

    Consolidate MAX/MIN definitions

    There were several, now there is one (two if you count the lower-case
    versions).

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Oct 30 09:23:09 2008 +0100

    mgsuvd: remove unused defines in config file.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Nov 2 16:14:22 2008 +0100

    Coding Style cleanup, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a47f957ab523019992fdef857af01bd71c58a4da
Author: Alessandro Rubini <rubini-list@gnudd.com>
Date:	Fri Oct 31 22:33:21 2008 +0100

    NAND: Allow NAND and OneNAND to coexist

    This removes in nand.h code that is verbatim duplicated from bbm.h,
    including directly bbm.h in nand.h. The previous state of affairs
    prevented compiling code for a board hosting both NAND and OneNAND chips.

    Reported-by: Scott Wood <scottwood@freescale.com>
    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
Author: Scott Wood <scottwood@freescale.com>
Date:	Fri Oct 31 13:51:12 2008 -0500

    JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.

    Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit c57fc28947e248fb03c49a28b467686299895055
Author: Jason Jin <Jason.Jin@freescale.com>
Date:	Fri Oct 31 05:07:04 2008 -0500

    NAND: Add NAND support for MPC8536DS board

    This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
    for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
    It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.

    Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 31 05:06:14 2008 -0500

    NAND: Fix CONFIG_ENV_ADDR for MPC8572DS

    CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 51b572a801be57790fe26adaa530210e7fba59cc
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:49:48 2008 +0900

    sh: rsk7203: Moved rsk7203 board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 58453b00b3ebb26aaa901210023f99504a90bb00
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:48:31 2008 +0900

    sh: MigoR: Moved MigoR board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c1da2a22817ba85b437afa2f4e715e658b219fd1
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:39:44 2008 +0900

    sh: r2dplus: Moved r2dplus board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 78385bf2359d828184d0b3649f7ae6b933420000
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:36:13 2008 +0900

    sh: sh7763rdp: Moved sh7763rdp board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c6525d459c350bfc246ea7826456af77e1e314eb
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:35:19 2008 +0900

    sh: sh7785lcr: Moved sh7785lcr board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:34:21 2008 +0900

    sh: r7780mp: Moved r7780mp board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 24 10:32:14 2008 +0900

    sh: ap325rxa: Moved ap325rxa board to board/renesas

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
Author: Wolfgang Denk <wd@xpert.denx.de>
Date:	Fri Oct 31 01:12:28 2008 +0100

    CFI Driver: Fix "flash not ready" problem

    This patch fixes a problem on systems where the NOR flash is attached
    to a 64 bit bus.  The toggle bit detection in flash_toggle() is based
    on the assumption that the same flash address is read twice without
    any other interjacent flash accesses.  However, on 32 bit systems the
    function flash_read64() [as currently implemented] does not perform
    an atomic 64 bit read - instead, this is broken down into two 32 bit
    read accesses on addresses "addr" and "addr + 4".  So instead of
    reading a 64 bit value twice from "addr", we see a sequence of 4 32
    bit reads from "addr", "addr + 4", "addr", and "addr + 4".	The
    consequence is that flash_toggle() fails to work.

    This patch implements a simple, but somewhat ugly solution, as it
    avoids the use of flash_read64() in this critical place (by breaking
    it down manually into 32 bit read operations) instead of rewriting
    flash_read64() such to perform atomic 64 bit reads as one could
    expect.  However, such a rewrite would require the use of floating
    point load operations, which becomes pretty complex:

	save MSR;
	set Floating Point Enable bit in MSR;
	use "lfd" instruction to perform atomic 64 bit read;
	use "stfd" to store value to temporary variable on stack;
	load u64 value from temporary variable;
	restore saved MSR;
	return u64 value;

    The benefit-cost ratio of such an implementation was considered too
    bad to actually attempt this, especially as we can expect that such
    an implementation would not only have a bigger memory footprint but
    also cause a performance degradation.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit cdd4fe63b094d4b767f12ff241d72566b461ee61
Author: Stefan Roese <sr@denx.de>
Date:	Fri Oct 31 10:48:08 2008 +0100

    ppc4xx: Fix spelling error in MAINTAINERS file

    Signed-off-by: Stefan Roese <sr@denx.de>

commit be270798900b75ad9c47c7b79c72f70441196c56
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 28 13:37:00 2008 +0100

    ppc4xx: Update PMC440 board support

    This patch brings PMC440 board support up to date:

    - fix GPIO configuration
    - add misc_init_f()
    - use better values for usbact variable
    - fix USB 2.0 phy reset sequence
    - shrink BAR2 to save PCI address space
    - add FDT support

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 75183b1a7fc04206d9779d13f16e03853d7e965d
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 28 13:36:59 2008 +0100

    ppc4xx: Fix PMC440 BSP commands

    This patch fixes the PMC440 BSP commands painit and selfreset

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 76b565b69f886d5ae748db65e44f464b0e70d41a
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 28 13:36:58 2008 +0100

    ppc4xx: Update PMC440 board configuration

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 28 13:36:57 2008 +0100

    ppc4xx: Fix esd loadpci command

    This patch fixes esd's loadpci command when not all
    memory on adapter boards is accessable via PCI.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 28 13:36:56 2008 +0100

    ppc4xx: Clean up PMC440 header

    -Codingstyle cleanup
    -Remove unused GPIO define

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 295133258a44f97a57fb2ec339aecfda11f4db95
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 28 13:36:55 2008 +0100

    ppc4xx: Handle other board variant in PMC440 FPGA code

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Mon Oct 27 12:35:59 2008 +0100

    ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg

    Xilinx ppc440 and ppc405 have many similarities. This patch merge the
    config files of both infrastuctures

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 25 06:45:31 2008 +0200

    ppc4xx: Correctly configure the GPIO pin muxing on Arches

    Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
    pin multiplexing correctly

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Oct 30 23:22:04 2008 +0100

    Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 4bc7deee9095f21e243b724ca3d634251c1d5432
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Wed Oct 29 23:27:45 2008 -0500

    libfdt: Fix bug in fdt_subnode_offset_namelen()

    There's currently an off-by-one bug in fdt_subnode_offset_namelen()
    which causes it to keep searching after it's finished the subnodes of
    the given parent, and into the subnodes of siblings of the original
    node which come after it in the tree.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f242a08871839eac081ba5b599af979f3a148a0d
Author: Peter Korsgaard <jacmet@sunsite.dk>
Date:	Tue Oct 28 08:26:52 2008 +0100

    fdt_resize(): ensure minimum padding

    fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
    (16 bytes), so make sure that fdt_resize at least adds that much
    padding, no matter what the location or size of the fdt is.

    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit d685b74c64a38849f1a129b3ab846fbf67dd937e
Author: Dave Liu <daveliu@freescale.com>
Date:	Thu Oct 23 21:59:35 2008 +0800

    74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache

    The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7

    mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache

    This is needed in unlock_ram_in_cache() because it is called from C and
    will corrupt the small data area anchor that is kept in R2.

    lock_ram_in_cache() is modified similarly as good coding practice, but
    is not called from C.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>

    also, the r2 is used as global data pointer.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit e053ab1903ccae6048ef759025b9f675bba91450
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Oct 28 11:45:04 2008 -0500

    mpc83xx pci: Round up memory size in inbound window.

    The current calculation will fail to cover all memory if
    its size is not a power of two.

    Signed-off-by: Scott Wood <scottwood@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 1c671977dc81359628be27ac99c174e76e8069ba
Author: Dave Liu <daveliu@freescale.com>
Date:	Thu Oct 23 21:19:13 2008 +0800

    86xx: remove the unused definition

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:47:49 2008 +0800

    86xx: remove the redundant r2 global data pointer save

    The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
    the another global data pointer save, but in fact the
    global data pointer will be initialized in the board_init_r,
    so remove it such as the 85xx/83xx family.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Kumar Gala <kumar.gala@freescale.com>

commit bd888e9544419665334a6f47f81f34011cea38f3
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:47:41 2008 +0800

    86xx: remove the unused code for 86xx family

    I believe these code was copied from 74xx family, but for
    86xx, it is unused.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Kumar Gala <kumar.gala@freescale.com>

commit 5ba1ef507402bc5e344dc374203792a40f222e8a
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:46:35 2008 +0800

    86xx: remove the second DDR LAW setting for mpc8641hpcn

    The DDR1 LAW will precedence the DDR2 LAW, so remove
    the second DDR LAW.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Becky Bruce <becky.bruce@freescale.com>

commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:46:23 2008 +0800

    86xx: remove the unused ddr_enable_ecc in the board file

    The DDR controller of 86xx processors have the ECC data init
    feature, and the new DDR code is using the feature, we don't
    need the way with DMA to init memory again.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Kumar Gala <kumar.gala@freescale.com>

commit dc2adad85bf580d65916c940683f6e9671e8a5dd
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 28 17:46:12 2008 +0800

    86xx: Move the clear_tlbs before MMU turn on

    We must invalidate TLBs before MMU turn on, but
    currently the code is not, if there are some stale
    TLB entry valid in the TLBs, it will cause strange
    issue.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Acked-by: Becky Bruce <becky.bruce@freescale.com>

commit 5cdade07b118d07154cb882650f9778cecc8a87c
Author: Scott Wood <scottwood@freescale.com>
Date:	Mon Oct 27 15:57:08 2008 -0500

    mpc8313erdb: Document NAND boot.

    Previously, the documentation claimed that NAND boot is not supported.
    This is no longer true.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Oct 29 14:20:26 2008 -0500

    NAND: Properly create JFFS2 cleanmarkers.

    As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
    command is currently broken, and among other things causes all blocks
    to be marked bad.

    This implements it properly using MTD_OOB_AUTO, along with some
    indentation fixes.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit f7fe57c09866b44692d18c8cf22828bd137ec58d
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Oct 29 13:42:41 2008 -0500

    NAND fsl elbc: Set FMR[ECCM] based on page size.

    Hardware expects ECCM 0 for small page and ECCM 1 for large page
    when booting from NAND, so use those defaults.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit c013b74975dab0805ef6d369b013230c4e8a660d
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Wed Oct 29 13:32:59 2008 -0400

    NAND: Add support for MPC8572DS board

    This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
    0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
    config file.

    It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
    make room for the increased code size with NAND enabled.

    Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Wed Oct 29 11:05:55 2008 -0400

    Make Freescale local bus registers available for both 83xx and 85xx.

    - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
      can be shared by both 83xx and 85xx
    - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
      files which use lbus83xx_t.
    - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
      85xx can share them.

    Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 695c130e4bf75b444720ddfd83aca88f41c046cf
Author: Scott Wood <scottwood@freescale.com>
Date:	Mon Oct 27 15:38:30 2008 -0500

    NAND: Align right column of the shorthelp with other commands.

    I accidentally broke this in when making consistent the partial
    alignment of the longhelp.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
Author: Karl Beldan <karl.beldan@gmail.com>
Date:	Mon Sep 15 16:08:03 2008 +0200

    NAND: Reset chip on power-up

    Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
    The first command sent is NAND_CMD_READID.
    Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
    Tested with an MT29F4G08AAC.

    Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit c45912d8abc52de796b9059a58faf7c4166eab58
Author: Scott Wood <scottwood@freescale.com>
Date:	Fri Oct 24 16:20:43 2008 -0500

    NAND: sync with 2.6.27

    This brings the core NAND code up to date with the Linux kernel.

    Since there were several drivers in Linux as of the last update that are
    not in u-boot, I'm not bringing over new drivers that have been added
    since in the absence of an interested party.

    I did not update OneNAND since it was recently synced by Kyungmin Park,
    and I'm not sure exactly what the common ancestor is.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit b1d0db1805c3395149777e507b6da53410abac4e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 17:25:47 2008 -0500

    bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}

    Added the ability to config out bootm support for Linux, NetBSD, RTEMS

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 17:25:46 2008 -0500

    bootm: support subcommands in linux ppc bootm

    Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 49c3a861d11735838f1f1b11999ce433006dc919
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 17:25:45 2008 -0500

    bootm: Add subcommands

    Add the ability to break the steps of the bootm command into several
    subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.

    This allows us to do things like manipulate device trees before
    they are passed to a booting kernel or setup memory for a secondary
    core in multicore situations.

    Not all OS types support all subcommands (currently only start, loados,
    ramdisk, fdt, and go are supported).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit be08315933537f061bc1ce61f33a29c56458bbad
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 17:25:44 2008 -0500

    bootm: Move to using a function pointer table for the boot os function

    This removes a bit of code and makes it easier for the upcoming sub bootm
    command support to call into the proper OS specific handler.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a369f4a492fa2805d87775d27380f0eeaca35aa6
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Mon Sep 29 23:03:14 2008 +1000

    i386: Renamed show_boot_progress in assembler code

    Renamed show_boot_progress in assembler init phase to
    show_boot_progress_asm to avoid link conflicts with C version

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Oct 27 16:42:00 2008 -0500

    85xx: Update MPC85xx_PORDEVSR_IO_SEL mask

    The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
    processors have a 3-bit wide IO_SEL field but have the most
    significant bit is wired to 0 so this change should not affect
    them.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit cd4251624205cb97104f6e32679dc7754934f711
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Oct 27 16:09:42 2008 -0500

    powerpc: fix pci window initialization to work with > 4GB DRAM

    The existing code has a few errors that need to be fixed in
    order to support large RAM sizes.  Fix those, and add a
    comment to make it clearer.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit 219542a1a66ca017b12860920714a9859b18a5d7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Oct 27 13:16:20 2008 -0500

    pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6b59e03e0237a40a2305ea385defdfd92000978b
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon Sep 1 16:21:22 2008 +0200

    lcd: Let the board code show board-specific info

    The information displayed when CONFIG_LCD_INFO is set is inherently
    board-specific, so it should be done by the board code. The current code
    dealing with this only handles two cases, and is already a horrible mess
    of #ifdeffery.

    Yes, this duplicates some code, but it also allows boards to print more
    board-specific information; this used to be very difficult.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon Sep 1 16:21:21 2008 +0200

    lcd: Set lcd_is_enabled before clearing the screen

    This allows the logo/info rendering routines to use the regular
    lcd_putc/lcd_puts/lcd_printf calls.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon Sep 1 16:21:20 2008 +0200

    lcd: Implement lcd_printf()

    lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
    this by borrowing the lcd_printf() implementation from the cogent board
    code (which appears to use its own LCD framework.)

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon Sep 1 16:21:19 2008 +0200

    atmel_lcdfb: Straighten out funky vl_sync logic

    If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
    otherwise we don't. WTF?

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon Sep 1 16:21:18 2008 +0200

    atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>

    atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
    includes a file that does, asm/arch/gpio.h, but this file doesn't
    include <asm/arch/hardware.h> like it's supposed to.

    Add the missing include to asm/arch/gpio.h and remove the workaround
    from the atmel_lcdfb driver. This makes the driver compile on avr32.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Oct 22 14:38:55 2008 -0500

    86xx: Convert all fsl_pci_init users to new APIs

    Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
    fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().

    With these changes the board code is a bit smaller and we get dma-ranges
    set in the device tree for these boards.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 08:28:33 2008 -0500

    85xx: Convert all fsl_pci_init users to new APIs

    Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
    MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
    and ft_fsl_pci_setup().

    With these changes the board code is a bit smaller and we get dma-ranges
    set in the device tree for these boards.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit a2aab460727e5f674353a83a81000ef794bffcae
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 23 00:01:06 2008 -0500

    pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Oct 22 14:06:24 2008 -0500

    pci/fsl_pci_init: Add a common PCI inbound setup function

    Add a common setup function that determines the pci_region(s) based
    on how much memory we have in the system.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit 612ea01018a459234d54ed57ec6a5a244ce75678
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 10:13:14 2008 -0500

    pci/fsl_pci_init: Enable larger address and setting inbound windows properly

    * PCI Inbound window was setup incorrectly.  The PCI address and system
      address were swapped.  The PCI address should be setting piwar/piwbear
      and the system address should be setting pitar.

    * Removed masking of addresses to allow for system address to support
      system address & PCI address >32-bits

    * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses

    * Respect the PCI_REGION_PREFETCH for inbound windows

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Oct 22 23:33:56 2008 -0500

    fdt: Added helper to set PCI dma-ranges property

    Added fdt_pci_dma_ranges() that parses the pci_region info from the
    struct pci_controller and populates the dma-ranges based on it.

    The max # of windws/dma-ranges we support is 3 since on embedded
    PowerPC based systems this is the max number of windows.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 23 00:05:47 2008 -0500

    fdt: Add fdt_getprop_u32_default helpers

    Add helper functions to return find a node and return it's property
    or a default value.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 18:06:15 2008 -0500

    86xx: Enable 64-bit PCI resources on all Freescale boards

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit 0151cbaccf4504821ecfde0217299bd740086bb6
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 11:33:58 2008 -0500

    85xx: Enable 64-bit PCI resources on all Freescale boards

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 21 08:36:08 2008 -0500

    pci: Allow for PCI addresses to be 64-bit

    PCI bus is inherently 64-bit.  While not all system require access to
    the full 64-bit PCI address range some do.	This allows those systems
    to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
Author: Dave Liu <daveliu@freescale.com>
Date:	Thu Oct 23 21:18:53 2008 +0800

    85xx: Fix the incorrect register used for DDR erratum1

    The 8572 DDR erratum1:
    DDR controller may enter an illegal state when operating
    in 32-bit bus mode with 4-beat bursts.

    Description:
    When operating with a 32-bit bus, it is recommended that
    DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
    This forces the DDR controller to use 4-beat bursts when
    communicating to the DRAMs. However, an issue exists that
    could lead to data corruption when the DDR controller is
    in 32-bit bus mode while using 4-beat bursts.

    Projected Impact:
    If the DDR controller is operating in 32-bit bus mode with
    4-beat bursts, then the controller may enter into a bad state.
    All subsequent reads from memory is corrupted.
    Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
    Therefore, this erratum does not affect DDR3 mode.

    Work Arounds:
    To work around this issue, software must set DEBUG_1[31] in
    DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
    and CCSRBAR offset + 0x6f00 for DDR_2).

    Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
    as condition, but it should be DDR_SDRAM_CFG register.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit d5b693090ed08d24c18491df9d8fc7387b2906f3
Author: Dave Liu <daveliu@freescale.com>
Date:	Thu Oct 23 21:17:19 2008 +0800

    85xx: remove unused config definition

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 0f060c3bf82832331a509f2e5d2442539e7aad09
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 23 01:47:38 2008 -0500

    85xx: Add basic e500mc core support

    Introduce CONFIG_E500MC to deal with the minor differences between
    e500v2 and e500mc.

    * Certain fields of HID0/1 don't exist anymore on e500mc
    * Cache line size is 64-bytes on e500mc
    * reset value of PIR is different

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 23 01:47:37 2008 -0500

    85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number

    Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
    e500mc's 64-byte cacheline properly when it gets added.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5deb8022c3749faac30e9ad9694691e2442b5c93
Author: Georg Schardt <schardt@team-ctech.de>
Date:	Fri Oct 24 13:51:52 2008 +0200

    ppc4xx: New board avnet fx12 minimodul

    This patch adds support for the avnet fx12 minimodul.
    It needs the "ppc4xx: Generic architecture for xilinx ppc405"
    patch from Ricardo.

    Signed-off-by: Georg Schardt <schardt@team-ctech.de>
    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Tue Oct 21 18:29:46 2008 +0200

    ppc4xx: Generic architecture for xilinx ppc405(v3)

    As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
    ppc440 boards, this patch presents a common architecture for all the
    xilinx ppc405 boards.

    Any custom xilinx ppc405 board can be added very easily with no code
    duplicity.

    This patch also adds a simple generic board, that can be used on almost
    any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h

    This patch is prepared to work with the latest version of EDK (10.1)

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 485c00a57fab86f72a3769480c66bf1ca22e1459
Author: Stefan Roese <sr@denx.de>
Date:	Fri Oct 24 08:56:09 2008 +0200

    ppc4xx: Disable DDR2 autocalibration on Kilauea for now

    Since the new autocalibration still has some problems on some Kilauea
    boards with 200MHz DDR2 frequency we disable the autocalibration and
    use the hardcoded values as done before. This seems to work reliably
    on all known DDR2 frequencies.

    After the autocalibration issue is fixed we will enable it again.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f177f4250c729727b1629fa8d8d6556c999e9b8c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Apr 9 02:02:07 2008 -0400

    Blackfin: fix up UART status bit handling

    Some Blackfin UARTs are read-to-clear while others are write-to-clear.
    This can cause problems when we poll the LSR and then later try and handle
    any errors detected.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 20:42:17 2008 -0400

    Blackfin: bf561-ezkit: drop redundant code

    Common Blackfin code already announces CPU information.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 20:43:10 2008 -0400

    Blackfin: bf561-ezkit: drop pointless USB code

    The USB/LAN register settings are not actually used/needed in order to
    drive things from U-Boot, so drop the code.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 20:47:58 2008 -0400

    Blackfin: linker scripts: force start.o and set initcode boundaries

    Make sure that the start.o object is always the first object in our linker
    script regardless of configuration settings, and add some linker symbols
    so the ldr utility can properly locate the initcode when generating a LDR.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:19:39 2008 -0400

    Blackfin: small cpu init optimization while setting interrupt mask

    Use the sti instruction to set the initial interrupt mask rather than
    banging on the core IMASK MMR to save both space and time.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 960922291c9594acb575cec7e47d7bed9b58182c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Oct 11 21:18:10 2008 -0400

    Blackfin: set initial stack correctly according to Blackfin ABI

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Apr 20 03:11:53 2008 -0400

    Blackfin: make baud calculation more accurate

    We should use the algorithm in the Linux kernel so that the UART divisor
    calculation is more accurate.  It also fixes problems on some picky UARTs
    that have sampling anomalies.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 04:21:41 2008 -0400

    Blackfin: decode hwerrcause/excause when crashing

    Having to decode hwerrcause/excause values is a pain, so automate it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2de95bb20c488f20298df6881b700a5a757ee780
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 04:20:54 2008 -0400

    Blackfin: fix register dump messages

    Make sure we report RETI/IPEND correctly.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 04:19:34 2008 -0400

    Blackfin: don't bother displaying reboot msg when crashing

    The hang function already tells you to reboot, so no point in showing it
    twice.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Jun 1 01:23:48 2008 -0400

    Blackfin: enable support for nested interrupts

    During cpu init, make sure we initialize the CEC properly so that
    interrupts can fire and be handled while U-Boot is running.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 39782727e185860faa4884c2b04e84cb33d1c6cf
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:55:25 2008 -0400

    Blackfin: init NAND before relocating env

    If booting out of NAND, we need to make sure we initialize it properly
    before attempting to relocate the environment.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 0f9a8819416ba40a53de50af148847a0e508f84d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 18:40:13 2008 -0400

    Blackfin: check cache bits, not cplb bits

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 17:52:59 2008 -0400

    Blackfin: drop unused cache flush code

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 15:21:47 2008 -0400

    Blackfin: unify cache handling code

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:39:07 2008 -0400

    Blackfin: only initialize the RTC when actually used

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 621e579b812dd1a2e6777f7cbf6e55e736505823
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Oct 6 03:44:33 2008 -0400

    Blackfin: fix SWRST register definition

    The SWRST register is a 16bit, not 32bit, register.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 18:54:57 2008 -0400

    Blackfin: build with -fomit-frame-pointer

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 17:50:26 2008 -0400

    Blackfin: document some of the blackfin directories

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e4337968e43698a68ba608369f46d4a4114111ca
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 15:16:56 2008 -0400

    Blackfin: only enable hardware error irq by default

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:36:43 2008 -0400

    Blackfin: punt old unused mem_init.h header

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit bcc121a01608042066a19ab5bff5bcfb805bf406
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:18:55 2008 -0400

    Blackfin: delete unused page_descriptor_table_size define

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:17:03 2008 -0400

    Blackfin: fix typo in boot mode comment and add NAND define

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
Author: Ben Maan <moo@cow>
Date:	Thu Aug 7 13:14:21 2008 -0400

    Blackfin: fix port mux defines for BF54x

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 0656ef2ba274910d31364fe022f6c7db0051660d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:09:50 2008 -0400

    Blackfin: update anomaly lists

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 50ca95402876cf7bac4e2d4f7855f616a038763f
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Aug 7 13:08:54 2008 -0400

    Blackfin: unify DSPID/DBGSTAT MMR definitions

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Oct 21 15:53:51 2008 +0200

    Fix strmhz(): avoid printing negative fractions

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4a7f6b750d8de543fdf8e58acd86745010054571
Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
Date:	Fri Oct 17 08:55:51 2008 -0400

    mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function

    This is done to allow other 83XX based platforms which also have UPM
    (e.g. 8360) to configure and use their UPM in u-boot.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Tue Oct 14 22:58:53 2008 +0400

    mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS

    With this patch u-boot can fixup the dr_mode and phy_type properties
    for the Dual-Role USB controller.

    While at it, also remove #ifdefs around includes, they are not needed.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b3379f3fd13969934c00097c05754e7a8990fd39
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Wed Oct 8 20:52:54 2008 +0400

    mpc83xx: add ELBC NAND support for the MPC837XEMDS boards

    Though NAND chip is replaceable on the MPC837XE-MDS boards, the
    current settings don't work with the default chip on the board.
    Nevertheless Freescale's U-Boot sets the option register correctly,
    so I just dumped the register from the working u-boot. My guess is
    that the old settings were applicable for some pilot boards, not
    found in the production.

    This patch also enables FSL ELBC driver so that we could access
    the NAND storage in the u-boot.

    The NAND support costs about 45KB, so the u-boot no longer fits
    into two 128KB NOR flash sectors, thus we also have to adjust
    environment location: add another 128KB to the monitor length.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

    It is due to hardware design and logic defect, that is the
    I/O[0:7] of NAND chip is connected to LAD[7:0], so when
    the NAND chip connected to nLCS3,  you have to set up the
    OR3[BCTLD] = '1' for normal operation, otherwise it will have
    bus contention due to the pin 48/25 of U60 is enabled.

    Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
    asserted upon access to the NAND chip, keep the default state.

    Acked-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 2 19:17:33 2008 +0400

    mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards

    The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
    standalone or acting as a PCI agent. User's Guide says:

    - When the CPLD recognizes its location on the PIB it automatically
      configures RCW to the PCI Host.
    - If the CPLD fails to recognize its location then it is automatically
      configured as an Agent and the PCI is configured to an external arbiter.

    This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
    flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
    PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
    any arbiter bad things will happen (here the board hangs during any config
    space reads).

    In this situation we must disable the PCI. And in case of anybody really
    want to use an external arbiter, we provide "pci_external_aribter"
    environment variable.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 2 18:32:25 2008 +0400

    mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards

    This involves configuring the SerDes and fixing up the flags and
    PHY addresses for the TSECs.

    For Linux we also fix up the device tree.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 2 18:31:59 2008 +0400

    mpc83xx: add TSECs' HRCWH masks for MPC837x processors

    We'll use these masks to parse TSEC modes out of HRCWH.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 2 18:31:56 2008 +0400

    mpc83xx: serdes: add forgotten shifts for rfcks

    The rfcks should be shifted by 28 bits left. We didn't notice the bug
    because we were using only 100MHz clocks (for which rfcks == 0).

    Though, for SGMII we'll need 125MHz clocks.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 2 18:31:53 2008 +0400

    mpc83xx: fix serdes setup for the MPC8378E boards

    MPC837xE specs says that SerDes1 has:

    — Two lanes running x1 SGMII at 1.25 Gbps;
    — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.

    And for SerDes2:

    — Two lanes running x1 PCI Express at 2.5 Gbps;
    — One lane running x2 PCI Express at 2.5 Gbps;
    — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.

    The spec also explicitly states that PEX options are not valid for
    the SD1.

    Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
    which is wrong to do.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Wed Sep 10 18:12:37 2008 +0400

    mpc83xx: mpc8360emds: rework LBC SDRAM setup

    Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
    it difficult to use (b/c then the memory is discontinuous and
    there is quite big memory hole between the DDR/SDRAM regions).

    This patch reworks LBC SDRAM setup so that now we dynamically
    place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
    DDR memory).

    With this patch we're able to:

    - Boot without external DDR memory;
    - Use most "DDR + SDRAM" setups without need to support for
      sparse/discontinuous memory model in the software.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
Author: Wolfgang Denk <wd@xpert.denx.de>
Date:	Tue Oct 21 11:23:56 2008 +0200

    FDT: don't use private kernel header files

    On some systems (for example Fedora Core 4) U-Boot builds with the
    following wanrings only:

    ...
    In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
		     from fdt.c:51:
		 /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!

    This patch fixes this problem.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f4d14c55504ce40287321bd63ee269e3233ee4ae
Author: Stefan Roese <sr@denx.de>
Date:	Mon Oct 13 15:15:31 2008 +0200

    ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 43cbce69d48d052574d71f50724be546d90a46a4
Author: Stefan Roese <sr@denx.de>
Date:	Mon Oct 13 10:45:14 2008 +0200

    ppc4xx: Correctly setup ranges property in ebc node

    Previously only the NOR flash mapping was written into the ranges
    property of the ebc node. This patch now writes all enabled chip
    select areas into the ranges property.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d7b26d58328f137471ea97de382bfa63f7239931
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Wed Oct 8 15:37:50 2008 +0200

    ppc4xx: Add GDSys neo 405EP board support

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Wed Oct 1 14:46:13 2008 +0200

    ppc4xx: Update configs for Netstal boards

    I reorganized my config files, putting the common stuff into netstal-common.h
    (got the idea by looking a amcc-common.h from Stefan).

    Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
Author: Adam Graham <agraham@amcc.com>
Date:	Wed Oct 8 10:13:19 2008 -0700

    ppc4xx: Add routine to retrieve CPU number

    Provide a weak defined routine to retrieve the CPU number for
    reference boards that have multiple CPU's.	Default behavior
    is the existing single CPU print output.  Reference boards with
    multiple CPU's need to provide a board specific routine.
    See board/amcc/arches/arches.c for an example.

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 59217bae40e90982ab5400d849c08af683ace036
Author: Adam Graham <agraham@amcc.com>
Date:	Wed Oct 8 10:13:14 2008 -0700

    ppc4xx: Add static support for 44x IBM SDRAM Controller

    This patch add the capability to configure a PPC440 based IBM SDRAM
    Controller with static, compiled-in, values. PPC440 memory subsystem
    includes a Memory Queue core.

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
Author: Adam Graham <agraham@amcc.com>
Date:	Wed Oct 8 10:12:53 2008 -0700

    ppc4xx: Add AMCC Arches board support (dual 460GT)

    The Arches Evaluation board is based on the AMCC 460GT SoC chip.
    This board is a dual processor board with each processor providing
    independent resources for Rapid IO, Gigabit Ethernet, and serial
    communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
    FLASH, UART, EEPROM and temperature sensor, along with a shared debug
    port. The two 460GT's will communicate with each other via shared
    memory, Gigabit Ethernet and x1 PCI-Express.

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
Author: Wolfgang Denk <wd@xpert.denx.de>
Date:	Sun Oct 19 21:54:30 2008 +0200

    TQM8260: environment in flash instead EEPROM, baudrate 115k

    Several customers have reported problems with the environment in
    EEPROM, including corrupted content after board reset. Probably the
    code to prevent I2C Enge Conditions is not working sufficiently.

    We move the environment to flash now, which allows to have a backup
    copy plus gives much faster boot times.

    Also, change the default console initialization to 115200 bps as used
    on most other boards.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Sun Oct 19 12:49:19 2008 -0500

    85xx: Fix compile warning in mpc8536ds.c

    mpc8536ds.c: In function 'is_sata_supported':
    mpc8536ds.c:615: warning: unused variable 'devdisr'

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8ed44d91c8122d00368523b0b746691c895d3b3c
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Oct 19 02:35:50 2008 +0200

    Cleanup: fix "MHz" spelling

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Oct 19 02:35:49 2008 +0200

    Use strmhz() to format clock frequencies

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Oct 19 02:35:48 2008 +0200

    strmhz(): Round numbers when printing clock frequencies

    Round clock frequencies for printing.

    Many boards printed off clock frequencies like 399 MHz instead of the
    exact 400 MHz because numberes were not rounded. This is fixed now.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
Author: Timur Tabi <timur@freescale.com>
Date:	Mon Oct 20 15:16:47 2008 -0500

    85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG

    Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
    to add a comment that the correct value disagrees with the 8544 reference
    manual.  The changelog for that commit is also wrong, as it says "bit 28"
    when it should be "bit 24".

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 360fe71e82b83e264c964c9447c537e9a1f643c8
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 18:24:06 2008 +0200

    mgcoge: add redundant environment sector

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 18:23:27 2008 +0200

    mgsuvd: update size of environment

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 2e26d837f11460c0e6dede7d65424a31e0183d09
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Fri Oct 10 11:41:00 2008 +0800

    Enabled the Freescale SGMII riser card on 8536DS

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>

commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
Author: Liu Yu <yu.liu@freescale.com>
Date:	Fri Oct 10 11:40:59 2008 +0800

    Enabled the Freescale SGMII riser card on 8572DS

    This patch based on Andy's work.
    Including command 'pixis_set_sgmii' support.

    Signed-off-by: Liu Yu <yu.liu@freescale.com>

commit bff188baf9427c35745356439435acf3864d4c65
Author: Liu Yu <yu.liu@freescale.com>
Date:	Fri Oct 10 11:40:58 2008 +0800

    Make pixis_set_sgmii more general to support MPC85xx boards.

    The pixis sgmii command depend on the FPGA support on the board, some 85xx
    boards support SGMII riser card but did not support this command, define
    CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.

    Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
    are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
    PIXIS_VCFGEN1_MASK in header file for both boards.

    Signed-off-by: Liu Yu <yu.liu@freescale.com>

commit 5e981d683d2363204c76773941c2e9c2044c808f
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Wed Oct 8 23:38:02 2008 -0500

    Add cpu/8xxx to TAGS_SUBDIRS

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Thu Oct 9 01:25:55 2008 -0500

    fsl_law clear enable before changing.

    Debug sessions may have left enabled laws.
    Changing lawbar with an unkown enabled tgtid could cause problems.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 86be510f7b5443e7e937f696bfbe037fdc740b15
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Thu Oct 9 00:29:27 2008 -0500

    mpc8572 additional end-point mode

    mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
    Include host_agent == 0 decode for end-point determination.

    This is not needed for the ds reference board since pcie3 will be a host
    in order to connect to the uli chip.  Include it here as a reference for
    other mpc8572 boards.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 6856b3d0221a838580e6bb06f61425fd7529ba93
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Wed Oct 8 23:37:59 2008 -0500

    85xx if NUM_CPUS>1, print cpu number

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Wed Oct 8 23:38:01 2008 -0500

    pixis do not print long help if not configured

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
Author: Andy Fleming <afleming@freescale.com>
Date:	Tue Oct 7 08:09:50 2008 -0500

    Have u-boot pass stashing parameters into device tree

    Some cores don't support ethernet stashing at all, and some
    instances have errata.  Adds 3 properties to gianfar nodes
    which support stashing.  For now, just add this support to
    85xx SoCs.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 12:37:57 2008 -0400

    Add DDR options setting on MPC8641HPCN board

    * Add board specific parameter table to choose correct cpo, clk_adjust,
    write_data_delay based on board ddr frequency and n_ranks.

    * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 12:37:41 2008 -0400

    Add ddr interleaving suppport for MPC8572DS board

    * Add board specific parameter table to choose correct cpo, clk_adjust,
    write_data_delay, 2T based on board ddr frequency and n_ranks.

    * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.

    * Set memory controller interleaving mode to bank interleaving, and disable
    bank(chip select) interleaving mode by default, because the default on-board
    DDR DIMMs are 2x512MB single-rank.

    * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 12:37:26 2008 -0400

    Add debug information for DDR controller registers

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit c9ffd839b1ada502c86f88edaf1534426b6688ce
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 12:37:10 2008 -0400

    Check DDR interleaving mode

    * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
    ba_intlv_ctl.
    * Print DDR interleaving mode information
    * Add doc/README.fsl-ddr to describe the interleaving setting

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit dfb49108e4f86c2224e1f30124328b0de66ef72e
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 12:36:55 2008 -0400

    Pass dimm parameters to populate populate controller options

    Because some dimm parameters like n_ranks needs to be used with the board
    frequency to choose the board parameters like clk_adjust etc. in the
    board_specific_paramesters table of the board ddr file, we need to pass
    the dimm parameters to the board file.

    * move ddr dimm parameters header file from /cpu to /include directory.
    * add ddr dimm parameters to populate board specific options.
    * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit dbbbb3abeff325855cae76e33d69d5665631443f
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 12:36:39 2008 -0400

    Make DDR interleaving mode work correctly

    Fix some bugs:
      1. Correctly set intlv_ctl in cs_config.
      2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
      3. Set base_address and total memory for each ddr controller in memory
	 controller interleaving mode.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Sep 22 23:40:42 2008 -0500

    85xx: Enable interrupt and setexpr commands on Freescale 85xx boards

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Sep 22 14:11:11 2008 -0500

    85xx: Improve flash remapping on MPC8572DS & MPC8536DS

    Changing the flash from cacheable to cache-inhibited was taking a significant
    amount of time due to the fact that we were iterating over the full 256M of
    flash.  Instead we can just flush the L1 d-cache and invalidate the i-cache.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 54e091d3b603a3332c619199ca83a07e95960da4
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Sep 22 14:11:10 2008 -0500

    85xx: Export invalidate_{i,d}cache and add flush_dcache

    Added the ability for C code to invalidate the i/d-cache's and
    to flush the d-cache.  This allows us to more efficient change mappings
    from cache-able to cache-inhibited.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 16:11:52 2008 +0200

    mgcoge, mgsuvd: extract more common code

    in ft_blob_update () for both boards was an unneccessary
    repetition of code, which this patch moves in a common
    function for this boards.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 12:15:55 2008 +0200

    mgcoge, mgsuvd: use in_*/out_* accesors

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit a21ca95f8b9dca22714952b348e4905ac157b5cd
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 13:52:51 2008 +0200

    mgsuvd: fix compiler warning when using soft_i2c driver

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 12:15:05 2008 +0200

    mgsuvd: fix coding style

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 5f4c3137f4f051787707c548133823f1656eb508
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 12:13:30 2008 +0200

    mgcoge: Second Flash on CS5 not on CS1

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 76da19df5b8e186d269f29190696bd31fb6c836b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 16 21:52:08 2008 -0500

    Added arch_lmb_reserve to allow arch specific memory regions protection

    Each architecture has different ways of determine what regions of memory
    might not be valid to get overwritten when we boot.  This provides a
    hook to allow them to reserve any regions they care about.	Currently
    only ppc, m68k and sparc need/use this.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e02d4a9904c8f36395994c0c81469d552b82f5ea
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Oct 16 16:32:35 2008 +0200

    mgcoge: added CONFIG_FIT to support the new u-boot image format

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Oct 16 15:01:15 2008 +0200

    rename CFG_ macros to CONFIG_SYS

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Oct 13 14:12:55 2008 -0500

    74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Sep 23 10:05:02 2008 -0500

    Expose command table search for sub-commands

    Sub-command can benefit from using the same table and search functions
    that top level commands have.  Expose this functionality by refactoring
    find_cmd() and introducing find_cmd_tbl() that sub-command processing
    can call.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f7e51b27508446f8cae3927975817137979ad5e8
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:41:33 2008 +0200

    mgsuvd, mgcoge: added BOOTCOUNT feature.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 8f64da7f83b553889bc08400c97047998382e9d2
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:41:00 2008 +0200

    mgcoge, mgsuvd: added support for the IVM EEprom.

    The EEprom contains some Manufacturerinformation,
    which are read from u-boot at boot time, and saved
    in same hush shell variables.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:40:28 2008 +0200

    hush: add showvar command for hush shell.

    This new command shows the local variables defined in
    the hush shell:

    => help showvar
    showvar
	- print values of all hushshell variables
    showvar name ...
	- print value of hushshell variable 'name'

    Also make the set_local_var() and unset_local_var ()
    no longer static, so it is possible to define local
    hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
    is defined, u-boot calls hush_init_var (), where
    boardspecific code can define local hush shell
    variables at boottime.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 67b23a322848d828a5e45c0567b72762bfde7abf
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:39:47 2008 +0200

    I2C: adding new "i2c bus" Command to the I2C Subsystem.

    With this Command it is possible to add new I2C Busses,
    which are behind 1 .. n I2C Muxes. Details see README.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit c24853644ddd2dd2e4246b5854a93e6254a14092
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:39:08 2008 +0200

    mgcoge, mgsuvd: add board specific I2C deblocking mechanism.

    As documented in doc/I2C_Edge_Conditions, adding a
    board specific deblocking mechanism via CFG_I2C_INIT_BOARD
    for the mgcoge and mgsuvd board.

    This code was originally written by Keymile in association
    with Anatech and Atmel in 1998. The Code toggels the SCL
    until the SCA line goes to HIGH (max. 16 times).
    And after this, a start condition is sent.

    This is another approach to deblock the I2C Bus. The
    soft I2C driver actually sends 9 clocks with SDA High,
    and then a stop at the end, to deblock the I2C Bus.

    Maybe we should use the approach from Keymile as
    the new standard?

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 4ca107effebfbabac1057c39632105dacef95957
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:38:38 2008 +0200

    soft_i2c: Add CFG_I2C_INIT_BOARD option

    This patch adds the option for a boardspecific
    I2C deblocking mechanism for the soft i2c driver.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:38:07 2008 +0200

    mgcoge, mgsuvd: add DTT (LM75) support.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 8e442df438ab677057571e3ac01846bff7719bce
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:37:34 2008 +0200

    lm75: Make the LM75 MULTI_BUS compatible.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 12f1678127c1df2b2878ba93c88948bedc060775
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:37:04 2008 +0200

    lm75: fix Codingstyle issues.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit f2202450c75ba6934b356024101500ddcde6e2a6
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:36:33 2008 +0200

    mgcoge, mgsuvd: added EEprom support.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 9661bf9d120f760238b2a073b84f2baf05010057
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:36:03 2008 +0200

    mgcoge, mgsuvd: add I2C support.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 98aed379586a155292efbf3209356836584b601c
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:35:26 2008 +0200

    soft_i2c: prevent compiler warnings if driver does not use CPU Pins.

    This patch fixes the following warnings, when using
    the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
    systems:

    soft_i2c.c: In function 'send_reset':
    soft_i2c.c:93: warning: unused variable 'immr'
    soft_i2c.c: In function 'send_start':
    soft_i2c.c:124: warning: unused variable 'immr'
    soft_i2c.c: In function 'send_stop':
    soft_i2c.c:146: warning: unused variable 'immr'
    soft_i2c.c: In function 'send_ack':
    soft_i2c.c:171: warning: unused variable 'immr'
    soft_i2c.c: In function 'write_byte':
    soft_i2c.c:196: warning: unused variable 'immr'
    soft_i2c.c: In function 'read_byte':
    soft_i2c.c:244: warning: unused variable 'immr'

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 799b784aa00cb03a352847ab9f9acdde79b72d21
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:34:45 2008 +0200

    i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:34:05 2008 +0200

    mgcoge: fix Coding Style issues.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit e43a27c49712203fe8848a17714330623edfb2eb
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:33:30 2008 +0200

    I2C: add new command i2c reset.

    If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
    it is not possible to get out of this, until the
    complete Hardware gets a reset. This new commando
    calls again i2c_init (and that calls i2c_init_board
    if defined), which will deblock the I2C Bus.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:32:25 2008 +0200

    mgsuvd, mgcoge: move this 2 boards in one dir.

    There are some more extensions, which are for both boards
    and some more boards from this manufacturer will follow soon.

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
Author: Dirk Eibach <eibach@gdsys.de>
Date:	Wed Oct 8 13:44:27 2008 +0200

    hwmon: Add LM63 support

    This patch adds support for the National LM63 temperature
    sensor with integrated fan control. It's used on the GDSys
    Neo board (405EP) which will be submitted later.

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit 7ba890bf2f2b92831420243c058951aa831119fd
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Wed Oct 8 11:01:17 2008 +0900

    Add Red Black Tree support

    Now it's used at UBI module. Of course other modules can use it.
    If you want to use it, please define CONFIG_RBTREE

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
Author: richardretanubun <richardretanubun@ruggedcom.com>
Date:	Mon Oct 6 16:10:53 2008 -0400

    CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c

    Added support for CONFIG_EFI_PARTITION to ext2 commands.
    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>

commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
Author: richardretanubun <richardretanubun@ruggedcom.com>
Date:	Fri Sep 26 11:13:22 2008 -0400

    Add support for CONFIG_EFI_PARTITION (GUID Partition Table)

    The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
    of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table

    Based on linux/fs/partitions/efi.[ch]

    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>

commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Oct 1 15:26:32 2008 +0200

    FIT: output image load address for type 'firmware', fix message while there

    Now that the auto-update feature uses the 'firmware' type for updates, it is
    useful to inspect the load address of such images.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Oct 1 15:26:31 2008 +0200

    Automatic software update from TFTP server

    The auto-update feature allows to automatically download software updates
    from a TFTP server and store them in Flash memory during boot. Updates are
    contained in a FIT file and protected with SHA-1 checksum.

    More detailed description can be found in doc/README.update.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Oct 1 15:26:27 2008 +0200

    flash: factor out adjusting of Flash address to the end of sector

    The upcoming automatic update feature needs the ability to adjust an
    address within Flash to the end of its respective sector. Factor out
    this functionality to a new function flash_sect_roundb().

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Oct 1 15:26:29 2008 +0200

    net: Make TFTP server timeout configurable

    There are two aspects of a TFTP transfer involving timeouts:
    1. timeout waiting for initial server reply after sending RRQ
    2. timeouts while transferring actual data from the server

    Since the upcoming auto-update feature attempts a TFTP download during each
    boot, it is undesirable to have a long delay when the TFTP server is not
    available. Thus, this commit makes the server timeout (1.) configurable by two
    global variables:

    TftpRRQTimeoutMSecs
    TftpRRQTimeoutCountMax

    TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
    server, TftpRRQTimeoutCountMax overrides default number of connection retries.
    The total delay when trying to download a file from a non-existing TFTP server
    is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.

    Timeouts during file transfers (2.) are unaffected.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Oct 1 15:26:28 2008 +0200

    net: express the first argument to NetSetTimeout() in milliseconds

    Enforce millisecond semantics of the first argument to NetSetTimeout() --
    the change is transparent for well-behaving boards (CFG_HZ == 1000 and
    get_timer() countiing in milliseconds).

    Rationale for this patch is to enable millisecond granularity for
    network-related timeouts, which is needed for the upcoming automatic
    software update feature.

    Summary of changes:
    - do not scale the first argument to NetSetTimeout() by CFG_HZ
    - change timeout values used in the networking code to milliseconds

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
Author: richardretanubun <richardretanubun@ruggedcom.com>
Date:	Mon Sep 29 18:28:23 2008 -0400

    Adds two more ethernet interface to 83xx

    Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
    Six eth interface is chosen because the platform I am using combines
    UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.

    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Wed Sep 24 11:42:12 2008 -0500

    Change UEC PHY interface to RGMII on MPC8568MDS

    Change UEC phy interface from GMII to RGMII on MPC8568MDS board

    Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
    but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.

    Now both UEC1 and UEC2 can work properly under u-boot.

    It is also in consistent with the kernel setting for 8568 UEC phy interface.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Oct 18 21:30:31 2008 +0200

    Prepare v2008.10 release: update CHANGELOG & Makefile

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f7a35a60cf45491871a5c28e9ad24db005487857
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 18:24:06 2008 +0200

    mgcoge: add redundant environment sector

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c2537ee85954af9d036b18b644f3e18d837bf4a5
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Oct 17 18:23:27 2008 +0200

    mgsuvd: update size of environment

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
Date:	Thu Oct 16 13:38:00 2008 -0500

    83xx NAND boot: wait for LTESR[CC]

    At least some revisions of the 8313, and possibly other chips, do not
    wait for all pages of the initial 4K NAND region to be loaded before
    beginning execution; thus, we wait for it before branching out of the
    first NAND page.

    This fixes warm reset problems when booting from NAND on 8313erdb.

    Signed-off-by: Scott Wood <scottwood@freescale.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>

commit bf29e0ea0af03d593c64614136acc723a7a022a2
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Fri Oct 17 12:54:18 2008 +0200

    ppc4xx: PPC44x MQ initialization

    Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
    values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
    dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).

    Previously the appropriate initialization had been made in Linux, by the
    ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
    registers after normal operation has begun is not supported and could
    have unpredictable results.

    Comment from Stefan: This patch doesn't change the resulting value of the
    MQ registers. It explicitly sets/clears all bits to the desired state which
    better documents the resulting register value instead of relying on pre-set
    default values.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ec081c2c190148b374e86a795fb6b1c49caeb549
Author: Stefan Roese <sr@denx.de>
Date:	Fri Oct 17 12:51:46 2008 +0200

    ppc4xx: PPC44x MQ initialization

    Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
    values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
    dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).

    Previously the appropriate initialization had been made in Linux, by the
    ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
    registers after normal operation has begun is not supported and could
    have unpredictable results.

    Comment from Stefan: This patch doesn't change the resulting value of the
    MQ registers. It explicitly sets/clears all bits to the desired state which
    better documents the resulting register value instead of relying on pre-set
    default values.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 16 21:58:50 2008 -0500

    85xx: Using proper I2C source clock divider for MPC8544

    The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
    bit 26, instead it should be bit 28.  This caused in incorrect
    interpretation of the i2c_clk which is the same as the SEC clk on
    MPC8544.  The SEC clk is controlled by cfg_sec_freq that is reported
    in PORDEVSR2.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Oct 16 21:58:49 2008 -0500

    Revert "85xx: Using proper I2C source clock divider for MPC8544"

    This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.

    The fix introduced by this patch is not correct.  The problem is
    that the documentation is not correct for the MPC8544 with regards
    to which bit in PORDEVSR2 is for the SEC_CFG.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2179c4766bffeece98e5e92040629a96c97e230c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Oct 15 10:19:41 2008 -0500

    85xx: Fix compile warning

    mpc8536ds.c: In function 'is_sata_supported':
    mpc8536ds.c:614: warning: unused variable 'devdisr'

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Wed Oct 15 10:40:24 2008 +0800

    Fix the function conflict in x86emu when DEBUG is on

    The function parse_line() in common/main.c was exposed globally by commit
    6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
    name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
    This patch fix this by renaming the function in the debug.c file.

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>

commit b4dbacf69a669a17487054552fc2761149dd6767
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Oct 15 15:50:45 2008 +0200

    Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 374b9038293d01d8744a46af9b7854a6fd99b228
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Oct 15 09:51:19 2008 +0200

    Fix compiler warning in lib_ppc/board.c

    Fix compiler warning introduced by commit 0f8cbc18

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9724555755a6f1066636481b41f7094e0ce93a69
Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Date:	Thu Oct 9 10:29:14 2008 +0530

    mpc83xx: wait till UPM completes the write to array

    Reference manual states that MxMR[MAD] increment is the indication
    of write to UPM array is complete. Honour that. Also, make the dummy
    write explicit.

    also fix the comment.

    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Date:	Wed Oct 8 18:12:20 2008 -0500

    Remove unwanted ';' at end of define.

    Currently this is not creating any problem. But it will result
    in compilation error when used as below.

    printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);

    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>

    continuation of the theme based on git grep "^#define CFG_.*;$" include/

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b2934a56650e9a6c54432f9ce6dc36757967385e
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Mon Oct 6 10:53:59 2008 -0400

    ARM DaVinci: Add maintainer information for SFFSDR board.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Sat Oct 4 19:26:16 2008 +0200

    api: fix type mismatch

    This patch fixes a type mismatch and thus removes a compiler
    warning when compiling with CONFIG_API on powerpc.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Oct 1 12:25:04 2008 -0500

    cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS

    Original code displayed:
     => help i2c
     i2c i2c speed [speed] - show or set I2C bus speed
     i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
     ...

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Oct 14 22:13:41 2008 +0200

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Fri Oct 10 11:41:01 2008 +0800

    Do not init SATA when disabled on 8536DS.

    SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
    driver still try to access the SATA registers, the cpu will hangup.
    This patch try to fix this by reading the serdes status before the SATA
    initialize.

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 9dbc366744960013965fce8851035b6141f3b3ae
Author: Remy Bohmer <linux@bohmer.net>
Date:	Fri Oct 10 10:23:22 2008 +0200

    The PIPE_INTERRUPT flag is used wrong

    At a lot of places in the code the PIPE_INTERRUPT flags and friends
    are used wrong. The wrong bits are compared to this flag resulting
    in wrong conditions. Also there are macros that should be used for
    PIPE_* flags.
    This patch tries to fix them all, however, I was not able to test the
    changes, because I do not have any of these boards.

    Review required!

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
Author: Remy Bohmer <linux@bohmer.net>
Date:	Fri Oct 10 10:23:21 2008 +0200

    fix USB initialisation procedure

    The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
    At some places directly 8,16,32,64 was used instead of the encoded
    value. Made a enum for the options to make this more clear and to help
    preventing similar errors in the future.

    After fixing this bug it became clear that another bug existed where
    the 'pipe' is and-ed with PIPE_* flags, where it should have been
    'usb_pipetype(pipe)', or even better usb_pipeint(pipe).

    Also removed the triple 'get_device_descriptor' sequence, it has no use,
    and Windows nor Linux behaves that way.
    There is also a poll going on with a timeout when usb_control_msg() fails.
    However, the poll is useless, because the flag will never be set on a error,
    because there is no code that runs in a parallel that can set this flag.
    Changed this to something more logical.

    Tested on AT91SAM9261ek and compared the flow on the USB bus to what
    Linux is doing. There is no difference anymore in the early initialisation
    sequence.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
Author: Nikita V. Youshchenko <yoush@cs.msu.su>
Date:	Fri Oct 3 00:03:55 2008 +0400

    fsl_diu: fix alignment error that caused malloc corruption

    When aligning malloc()ed screen_base, invalid offset was added.
    This not only caused misaligned result (which did not cause hardware
    misbehaviour), but - worse - caused screen_base + smem_len to
    be out of malloc()ed space, which in turn caused breakage of
    futher malloc()/free() operation.

    This patch fixes screen_base alignment.

    Also this patch makes memset() that cleans framebuffer to be executed
    on first initialization of diu, not only on re-initialization. It looks
    correct to clean the framebuffer instead of displaying random garbage;
    I believe that was disabled only because that memset caused breakage
    of malloc/free described above - which no longer happens with the fix
    described above.

    Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>

commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Wed Sep 24 10:29:37 2008 +0200

    api: Fix building with CONFIG_API

    This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.

    USB_MAX_STOR_DEV is defined in include/usb.h, but
    needed in api/api_storage.c.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Sep 23 12:39:40 2008 -0500

    Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 81e612014c40c922ec35488d17c504d4e9286f06
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Sep 23 12:38:42 2008 -0500

    Remove CFG_EEPROM_PAGE* dependencies for temperature sensors

    The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
    CFG_EEPROM_PAGE_WRITE_BITS in various temperature
    sensor drivers are not necessary

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Oct 14 07:04:38 2008 -0400

    cmd_spi: remove broken signed casting for display

    Since we're working with unsigned data, you can't apply a signed pointer
    cast and then attempt to print the result.	Otherwise you get wrong output
    when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Oct 14 07:05:24 2008 -0400

    strings cmd: drop old CONFIG_CFG_STRINGS define

    We don't need CONFIG_CFG_STRINGS anymore now that we have the define
    CONFIG_CMD_STRINGS and Makefile control.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit fecb5ade3b37f62981f2b05b621005850173aaa9
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Fri Sep 19 17:32:49 2008 +0800

    Fix the NAND size overflow issue.

    When the total size of all NAND devices exceeds 4 GiB, the size  will
    overflow. This patch tries to fix this.

    Note that we still have a problem when a single NAND device is bigger
    than 4 GiB: then the overflow would actually happen earlier, i. e.
    when storing the size in nand_info[].size, as nand_info[].size is an
    "u_int32_t".

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 30f574717277238b9014b8136c90eea77196490f
Author: Louis Su <louis@asix.com.tw>
Date:	Wed Jul 9 11:01:37 2008 +0800

    AX88180: new gigabit network driver

    Signed-off-by: Louis Su <louis@asix.com.tw>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Tue Aug 19 16:07:03 2008 +0200

    enable 10/100M at VSC8601 at tsec driver

    Currently VSC8601 doesn't link with 10/100M partners if the
    EEPROM/Strapping is not set up.
    Setting the auto-neg register fixes this.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 702c85b0e876d587c11acdbb55738ee52acd54f4
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Sep 30 15:02:53 2008 +0900

    net: ne2000: Divided a function of NE2000 driver

    get_prom function was used __attriute__ , but it is not enable.
    ax88796.o does not do link besides ne2000.o. When ld is carried
    out, get_prom function of ax88796.c is ignored.
    This problem is a thing by specifications of ld.
    I checked and test this patch on SuperH and MIPS.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Oct 14 11:10:59 2008 +0900

    sh: rsk7203: Add smc911x driver support to board config file

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit cae6f909baf86357b3c0bd01acfc414348c4d175
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Oct 9 13:54:33 2008 +0900

    sh: Fix cannot execute a stand-alone application

    Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Wed Oct 8 23:38:00 2008 -0500

    fsl_pci_init do not scan bus when configured as an end-point

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Tue Sep 16 17:07:53 2008 -0400

    ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.

    This is no longer necessary now that the GD_FLG_RELOC flag is set for
    all ARM boards.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit d977a57356657ba241256231efca32828a5822f9
Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Date:	Sat Sep 13 10:04:32 2008 +0200

    Fix lzma uncompress call (image_start wrongly used instead image_len)

    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>

commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
Author: Nick Spence <nick.spence@freescale.com>
Date:	Thu Aug 28 14:09:15 2008 -0700

    mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache

    This is needed in unlock_ram_in_cache() because it is called from C and
    will corrupt the small data area anchor that is kept in R2.

    lock_ram_in_cache() is modified similarly as good coding practice, but
    is not called from C.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>

commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 19 15:05:34 2008 -0500

    86xx: remove redudant code with lib_ppc/interrupts.c

    For some reason we duplicated the majority of code in lib_ppc/interrupts.c
    Not know how that happened, but there is no good reason for it.

    Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
    they exist.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0d01f66d235118515b5086b88f82498bc0695d6a
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Thu Oct 9 01:26:36 2008 -0500

    CFI: cfi_flash write fix for AMD legacy

    The flash_unlock_seq requires a sector for AMD_LEGACY.
    Fix a retcode check typeo.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 542b385a620a1783454a00424930e51895f45073
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 7 13:13:10 2008 +0200

    ppc4xx: Fix USB 2.0 phy reset sequence

    This patch fixes USB 2.0 communication issues on some DU440 boards.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit df8c1ce11114c2260dedb5547281945f7db8fa5c
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 7 13:13:09 2008 +0200

    ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 7 13:13:08 2008 +0200

    ppc4xx: Fix DU440 GPIO configuration

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 35dd025c70fcc4389317db2f2a9d14795172137d
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 7 13:13:07 2008 +0200

    ppc4xx: Update DU440 config

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f3bf9273939ffe1a60a32a2eef909097f15df56b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Oct 8 15:36:39 2008 -0500

    MPC8572DS: Fix compile warnings

    Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
    compile warnings:

    cmd_i2c.c:112: warning: missing braces around initializer
    cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit dffd2446fb041f38ef034b0fcf41e51e5e489159
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Tue Sep 30 10:55:57 2008 +0200

    85xx: Using proper I2C source clock divider for MPC8544

    Measurements with our MPC8544 board showed that the I2C bus frequency
    is wrong by a factor of 1.5. Obviously, the interpretation of the
    MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
    correct. There seems to be an error in the 8544 RM.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
Author: Rafal Czubak <rcz@semihalf.com>
Date:	Wed Oct 8 13:41:30 2008 +0200

    FSL: Fix get_cpu_board_revision() return value.

    get_cpu_board_revision() returned board revision based on information stored
    in global static struct eeprom. It should instead use one from local struct
    board_eeprom, to which the data is actually read from EEPROM. The bug led to
    system hang after printing L1 cache information on U-Boot startup. The problem
    was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
    boards using CFG_I2C_EEPROM_CCID.

    The change has been successfully tested on MPC8555CDS system.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>

commit 747f316cca484ed627a97dd3391febabce384186
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 30 20:08:49 2008 +0200

    update uImage FIT multi documentation

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 30 20:08:36 2008 +0200

    move README.imx31 to doc/ and merge with README.mx31

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Sep 25 20:54:37 2008 +0200

    i.MX31: switch to CFG_HZ=1000

    Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
    cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
    provides 2% or 0.4% precision depending on the
    CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
    boot-delay.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
Author: gnusercn <gnusercn@gmail.com>
Date:	Wed Oct 8 18:58:58 2008 +0200

    Fix bug: in arch-arm, env_get_char dose not work fine

    due to the arm implementation which supposed that U-Boot is in RAM
    when we jump to start_armboot

    Signed-off-by: gnusercn <gnusercn@gmail.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
Author: Adam Graham <agraham@amcc.com>
Date:	Mon Oct 6 10:16:13 2008 -0700

    ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change

    After changing SDRAM_CLKTR phase value rerun the memory preload
    initialization sequence (INITPLR) to reset and relock the memory
    DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
    adjustment effects the phase relationship of the internal, to the
    PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 11:48:03 2008 -0400

    Remove redundant #define for MPC8536DS

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 445a7b38308eb05b41de74165b20855db58c7ee5
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 11:47:30 2008 -0400

    Add ID EEPROM support for MPC8572DS

    The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
    system information like mac addresses etc. This patch enables it.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri Oct 3 11:46:59 2008 -0400

    Minor fixes for I2C address on MPC8572DS

    MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
    according to the board spec, and adds the 2nd i2c bus offset.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Sat Sep 27 14:40:57 2008 +0800

    Fix the incorrect DDR clk freq reporting on 8536DS

    On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
    The display is still sync mode DDR freq. This patch try to fix
    this. The display DDR freq is now the actual freq in both
    sync and async mode.

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>

commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 7 10:28:46 2008 -0500

    85xx: Remove setting of *cache-line-size in device trees

    ePAPR says if the *cache-block-size is the same as *cache-line-size
    than we don't need the *cache-line-size property.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit cd3cb0d9269d155276b00207e3816a9347fd1c92
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Oct 4 07:56:06 2008 -0400

    libfdt: Fix error in documentation for fdt_get_alias_namelen()

    Oops, screwed up the function name in the documenting comment for this
    function.  Trivial correction in this patch.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Wed Aug 20 16:55:14 2008 +1000

    libfdt: Add function to explicitly expand aliases

    Kumar has already added alias expansion to fdt_path_offset().
    However, in some circumstances it may be convenient for the user of
    libfdt to explicitly get the string expansion of an alias.	This patch
    adds a function to do this, fdt_get_alias(), and uses it to implement
    fdt_path_offset().

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Oct 2 01:55:38 2008 -0400

    cfi_flash: do not reset flash when probe fails

    The CFI flash driver starts at flash_init() which calls down into
    flash_get_size().  This starts by calling flash_detect_cfi().  If said
    function fails, flash_get_size() finishes by attempting to reset the
    flash.  Unfortunately, it does this with an info->portwidth set to 0x10
    which filters down into flash_make_cmd() and that happily smashes the
    stack by sticking info->portwidth bytes into a cfiword_t variable that
    lives on the stack.  On a 64bit system you probably won't notice, but
    killing the last 8 bytes on a 32bit system usually leads to a corrupt
    return address.  Which is what happens on a Blackfin system.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
Author: Stefan Roese <sr@denx.de>
Date:	Fri Sep 26 17:03:26 2008 +0200

    fdt: Overwrite /chosen node in bootm if it already exists in the dtb

    Set force parameter in fdt_chosen() call in do_bootm_linux() call.
    Without this, the chosen node is not overwritten if it already
    exists.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Sep 25 11:02:17 2008 -0500

    Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.

    Using Gcc 4.3 detected this problem:

	../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
	../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
	occur when assuming that (X + c) < X is always false

    To fix the problem, treat the offset as an unsigned int.

    The problem report and proposed fix were provided
    by Steve Papacharalambous <stevep@freescale.com>.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Fri Aug 29 14:19:13 2008 +1000

    libfdt: Fix bugs in fdt_get_path()

    The current implementation of fdt_get_path() has a couple of bugs,
    fixed by this patch.

    First, contrary to its documentation, on success it returns the length
    of the node's path, rather than 0.	The testcase is correspondingly
    wrong, and the patch fixes this as well.

    Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
    instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
    Specifically this happens when there is insufficient space even to
    hold the path's second last component.  This behaviour is corrected,
    and the testcase updated to check it.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 33af3e6656e84660d397b5dd95abab2dccc36f83
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Oct 1 12:34:58 2008 +0200

    TQM5200: enable support for ATAPI devices

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 15 05:48:25 2008 +0200

    Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"

    we need this due to the arm implementation which supposed that U-Boot
    is in RAM when we jump to start_armboot

    This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
    in order to do it for all arm board

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Sep 24 08:46:25 2008 -0500

    mpc83xx: don't disable autoboot

    bootdelay set to -1 'permanently' disables autobooting, even if
    bootcmd is specified.  Change to a positive value to allow
    autobooting when a bootcmd is set.

    Reported-by: Coray Tate <Coray.Tate@freescale.com>
    Cc: Scott Wood <scottwood@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Wed Sep 24 10:42:15 2008 +0900

    mpc83xx: Fix typo in include/mpc83xx.h

    Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 162c41c03179727a1d14262f703c9a8bc40231fa
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Sep 23 09:38:49 2008 -0500

    mpc83xx: add h/w flash protection to board configs

    the operating system may leave flash in a h/w locked state after writing.
    This allows u-boot to continue to write flash by enabling h/w unlocking
    by default.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Sep 11 21:35:36 2008 +0400

    mpc83xx: spd_sdram: fix ddr sdram base address assignment bug

    The spd_dram code shifts the base address, then masks 20 bits, but
    forgets to shift the base address back. Fix this by just masking the
    base address correctly.

    Found this bug while trying to relocate a DDR memory at the base != 0.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 8fd4166c467a46773f80208bda1ec3b4757747bc
Author: Stefan Roese <sr@denx.de>
Date:	Mon Sep 22 16:10:43 2008 +0200

    ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup

    Depending on the configuration jumper "SATA SELECT", U-Boot disabled
    either one PCIe node or the SATA node in the device tree blob. This
    patch removes the unnecessary and even confusing warning, when the node
    is not found at all.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
Author: Remy Bohmer <linux@bohmer.net>
Date:	Fri Sep 19 13:30:06 2008 +0200

    Add missing device types to dev_print() in part.c

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Sep 22 22:23:06 2008 +0200

    Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
    eventually leads to a machine check. This change assures that DPRAM
    is allocated only once in that case.

    Signed-off-by: Gary Jennejohn <garyj@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
Author: Laurent Pinchart <laurentp@cse-semaphore.com>
Date:	Wed Sep 17 17:57:34 2008 +0200

    Fix Spartan-3 definitions.

    A few Spartan-3 definitions erroneously use Spartan-3E size
    constants. This patch fixes them.

    Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>

commit 28113e1f0da4146b823ffce37680d31d5685a60b
Author: Laurent Pinchart <laurentp@cse-semaphore.com>
Date:	Wed Sep 17 17:41:58 2008 +0200

    Remove duplicate Spartan-3E definition.

    Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Sep 17 13:46:17 2008 +0200

    socrates: change default mtest address range

    Running mtest command on socrates without specifying
    an address range crashes the board. This patch changes
    default mtest address range to prevent this behavior.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Sep 17 12:34:45 2008 +0200

    socrates: fix crash after relocation

    Currently U-Boot crashes after relocation to RAM.
    Changing the CPO value of the DDR SDRAM TIMING_CFG_2
    register to READ_LAT + 1 (to the value it was before
    conversion of socrates to new DDR code) fixes the
    problem.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 562788b0a303f3528b920d81f547f5ca77ba528e
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Sep 17 11:45:51 2008 +0200

    socrates: fix SPD EEPROM address

    Commit be0bd8234b9777ecd63c4c686f72af070d886517
    changed SPD EEPROM address to 0x51 and DDR SDRAM
    detection stopped working. Change this address
    back to 0x50.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 023824549a370bd185d7129d9a6c86f9be7b86a8
Author: Stefan Roese <sr@denx.de>
Date:	Mon Sep 22 11:06:50 2008 +0200

    Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"

    This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e58c41e26cf3c8accd60311be579f452e368e97e
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Thu Sep 18 20:13:08 2008 +0900

    usb: Fix compile warning of r8a66597-hcd

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit b5d10a13525c07ec6374adf840d7c87553b5f189
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Thu Sep 18 19:34:36 2008 +0900

    sh: Fix compile warning

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 4a065abf926f128beb36d93449defa0d690e7fef
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Thu Sep 18 19:04:26 2008 +0900

    sh: Add support watchdog for SH4A core

    Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
    And fix some compile warning.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Wed Sep 17 11:45:26 2008 +0900

    sh: Fix typo in SH serial driver

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Wed Sep 17 11:08:36 2008 +0900

    sh: Add support any page size and empty_zero_page to SH Linux uImage

    Old U-Boot supported 4KB page size only. If this version, Linux
    kernel can not get command line from U-Boot.
    SH Linux kernel can change page size and empty_zero_page.
    This patch support this function and fix promlem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit ce9f99ddb59628f41dc534e892368a7d66dfc774
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Aug 28 13:40:52 2008 +0900

    sh: rsk7203: Add support pkt_data_pull and pkt_data_push function

    Add function of smc911x, pkt_data_pull and pkt_data_push.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Sep 18 13:57:32 2008 +0200

    ADS5121: fix typo in "rootpath" default setting

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Sep 16 14:55:44 2008 +0200

    USB layer of U-Boot causes USB protocol errors while using USB memory sticks

    There are several differences between Linux, Windows and U-boot for initialising the
    USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
    things really different, and some are wrong (compared to the USB standard).

    This patch fixes some errors:
    * The NEW_init procedure that was already in the code is good, while the old procedure
      is wrong. See code comments for more info.
    * On a Control request the data returned by the device can be more than 8 bytes, while
      the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
      This results in a lot of USB sticks not being recognised, and the transmission ended
      frequently with a CTL:TIMEOUT Error.
    * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 6f5794a6f78b313231256958fd73673c6aacc116
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Sep 16 14:55:43 2008 +0200

    Refactoring parts of the common USB OHCI code

    This patch refactors some large routines of the USB OHCI code by
    making some routines smaller and more readable which helps
    debugging and understanding the code. (Makes the code looks
    somewhat more like the Linux implementation.)

    Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit be19d324edc1a1d7f393d24e10d164cd94c91a00
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Sep 16 14:55:42 2008 +0200

    Fix for USB sticks not working on ARM while using GCC 4.x compilers

    The GCC-compiler makes an optimisation error while optimising the routine
    usb_set_maxpacket(). This should be fixed in the compiler in the first place,
    but there lots of compilers out there that makes this error, that it is
    probably wiser to workaround it in U-boot itself.

    What happens is that the register r3 is used as loop-counter 'i', but gets
    overwritten later on. From there it starts using register r3 for several other
    things and the assembler code is becoming a big mess. This is clearly a compiler bug.

    This error occurs on at least several versions of Code Sourcery Lite compilers
    for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
    compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.

    We work around it by splitting up this routine in 2 parts, and making sure that
    the split out part is NOT inlined any longer. This will make GCC spit out assembler
    that do not show this problem. Another possibility is to adapt the Makefile to stop
    optimisation for the complete file. I think this solution is nicer.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Sep 17 10:17:55 2008 +0200

    Coding style cleanup; update CHANEGLOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
Author: Victor Gallardo <vgallardo@amcc.com>
Date:	Tue Sep 16 06:59:13 2008 -0700

    ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)

    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ce47eb402c5e29a025399dc282246414fc492940
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Sep 16 10:04:47 2008 -0500

    Support for multiple SGMII/TBI interfaces for TSEC ethernet

    Fix TBI PHY accesses to use the proper offset in CPU register space. The
    previous code would incorrectly access the TBI PHY by reading/writing to CPU
    register space at the same location as would be used to access external PHYs.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 7c803be2eb3cae245dedda438776e08fb122250f
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 16 18:02:19 2008 +0200

    TQM8xx: Fix CFI flash driver support for all TQM8xx based boards

    After switching to using the CFI flash driver, the correct remapping
    of the flash banks was forgotten.

    Also, some boards were not adapted, and the old legacy flash driver
    was not removed yet.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Sep 14 00:59:35 2008 +0200

    Prepare v2008.10-rc2

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Sep 13 02:23:05 2008 +0200

    Coding style cleanup, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0c32565f536609d78feef35c88bbc39d3ac53a73
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Sep 10 09:18:34 2008 -0500

    Update mailing list email and archive addresses

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
Date:	Thu Sep 11 15:40:01 2008 +0200

    85xx: socrates: autoprobe Lime chip

    This patch is an attempt to implement autoprobing for the Lime
    presence on the bus.
    Configure GPCM for Lime CS2 and try to access chip ID registers.
    Second read atempt delivers register values if the chip is present.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
Date:	Thu Sep 11 15:40:01 2008 +0200

    85xx: socrates: Add support for new image format.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Sep 11 17:28:18 2008 +0900

    sh: Fix compile error for r2dplus

    netdev.h was not include by r2dplus.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

commit 56844a22b76c719e600047e23b80465a44d76abd
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Sep 11 08:11:23 2008 +0200

    powerpc: Fix bootm to boot up again with a Ramdisk

    Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
    and this stopped Linux from booting with a Ramdisk. This patch fixes
    this, by deleting the useless dummy mem reservation.

    When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
    added to of_size, so we dont need anymore a dummy mem reservation.

    I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
    system (=0x44 bytes) and rounded it up to 0x80).

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Date:	Mon Sep 8 02:46:13 2008 +0200

    Add support for LZMA uncompression algorithm.

    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0008b6d968160abe2bfd936493f3a516a7c8da20
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Fri Jun 27 23:04:20 2008 +0400

    fsl_elbc_nand: ecclayout cleanups

    This patch deletes oobavail assignments, they're calculated by the nand
    core code in nand_scan_tail, plus current oobavail values are wrong for
    the LP NANDs.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Fri Jun 27 23:04:13 2008 +0400

    fsl_elbc_nand: implement support for flash-based BBT

    This patch implements support for flash-based BBT for chips working
    through ELBC NAND controller, so that NAND core will not have to re-scan
    for bad blocks on every boot.

    Because ELBC controller may provide HW-generated ECCs we should adjust
    bbt pattern and bbt version positions in the OOB free area.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 97ae023648e764f794ffb9c52da109d6caf09c47
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Fri Jun 27 23:04:04 2008 +0400

    fsl_elbc_nand: fix OOB workability for large page NAND chips

    For large page chips, nand_bbt is looking into OOB area, and checking
    for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
    reserved for bbt means.

    But ELBC driver is specifying ecclayout so that oobfree area starts at
    offset 1, so only one byte left for the bbt purposes.

    This causes problems with any OOB users, namely JFFS2: after first mount
    JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:

      OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
      OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

    And on the next boot, NAND core will rescan for bad blocks, then will
    see "0xff 0x19" pattern, and will mark all blocks as bad ones.

    To fix the issue we should implement our own bad block pattern: just one
    byte at OOB start. Though, this will work only for x8 chips. For x16
    chips two bytes must be checked. Since ELBC driver does not support x16
    NANDs (yet), we're safe for now.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 7238ada313057a85409485b8ee21515dc10c07a5
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Sep 12 13:52:21 2008 +0200

    MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b18410e508a12ba0a177dfc2a386857c806fa96d
Author: Stefan Roese <sr@denx.de>
Date:	Thu Sep 11 13:05:56 2008 +0200

    ppc4xx: Enable device tree (FDT) support in zeus board port

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
Author: Stefan Roese <sr@denx.de>
Date:	Wed Sep 10 16:53:47 2008 +0200

    ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports

    This patch fixes a problem introdiced with patch
    bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
    initdram()].

    The boards affected are:
    - PCI405
    - PPChameleonEVB
    - quad100hd
    - taihu
    - zeus

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 61737c59a3285f6fadf96a5836879898c04ec28d
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Thu Sep 11 19:41:26 2008 -0400

    ppc4xx: Add .gitignore file to xilinx-ppc440 boards

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Thu Sep 11 19:41:25 2008 -0400

    ppc4xx: Fix compilation of v5fx30teval_flash

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Wed Sep 10 17:44:30 2008 -0400

    ppc4xx: Fix in-tree build for ppc440-generic boards

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Sep 12 02:20:47 2008 +0200

    ARM: synchronize mach-types.h with linux 2.6.27-rc6

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
Author: Jens Scharsig <esw@bus-elektronik.de>
Date:	Fri Sep 12 02:20:47 2008 +0200

    at91rm9200: fix errors with CONFIG_CMD_I2C_TREE

    This patch prevents linker error on AT91RM9200 boards, if
    CONFIG_CMD_I2_TREE is set.
    It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.

    Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>

commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Fri Sep 12 02:20:47 2008 +0200

    ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c

    ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 03db53335c8eba656a7c44d1555b1a4514383e33
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Fri Sep 12 02:20:46 2008 +0200

    make: Remove redundant __ARM__ addition when cross-compiling on *BSD

    __ARM__ is given by arm_config.mk automatically.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
Author: Claudio Scordino <claudio@evidence.eu.com>
Date:	Fri Sep 12 02:20:46 2008 +0200

    Fix MACH_TYPE for the AT91RM9200DK board.

    Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>

commit 274737e5eb25b2bcd3af3a96da923effd543284f
Author: Andrew Dyer <adyer@righthandtech.com>
Date:	Fri Sep 12 02:20:46 2008 +0200

    i.mx change get_timer(base) to return time since base

    This patch changes get_timer() for i.MX to return the time since
    'base' instead of the time since the counter was at zero.

    Symptom seen is flash timeout errors when erasing or programming a
    sector using the common cfi flash code.

    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>

commit 48fed40575b3e8eae960eb0141509ddd9a73012a
Author: Andrew Dyer <adyer@righthandtech.com>
Date:	Fri Sep 12 02:20:46 2008 +0200

    i.MX use u-boot baud rate and don't assume UART master clock

    1) Change the i.MX serial driver to use the baud rate set in the
     u-boot environment

    2) don't assume a 16MHz value for PERCLK1 in baud rate calculations

    3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
     one to clear" like other status bits in the reg.)

    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>

commit 6e1551a870d360805b9d172dc56d935064abe71d
Author: Andrew Dyer <adyer@righthandtech.com>
Date:	Fri Sep 12 02:20:46 2008 +0200

    arm920t fix constant error in start.S

    Code in cpu/arm920t/start.S will die with a compilation error if
    CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
    the ARM sub instruction.  Change the code so that each is subtracted
    independently to avoid the error.

    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>

commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Fri Sep 12 02:20:40 2008 +0200

    ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h

    - Correct Invalid #define of MPUTIM_PTV_MASK for
       omap1510 & omap730 register definition

     MPUTIM_PTV_MASK is defined as
     #define MPUTIM_PTV_MASK		(0x7<<PTV_BIT)

     while it should have been
     #define MPUTIM_PTV_MASK		(0x7<<MPUTIM_PTV_BIT)

    - Below Patch corrects the same

    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
Author: Adrian Filipi <adrian.filipi@eurotech.com>
Date:	Fri Jul 18 11:52:02 2008 -0400

    Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.

    Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>

commit eb16135df20535b0d19969f50fb5bd17f95e9c25
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Aug 28 12:25:11 2008 +0200

    i.MX31: document timer precision option

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 1a6337b01351b82a45b0defa76f08744511c580b
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Fri Aug 29 10:36:18 2008 +0200

    i.MX31: Make the SPI bus and chip select configurable for MC13783

    The i.MX31 has three SPI buses and each bus has several chip selects
    and the MC13783 chip can be connected to any of these. The current
    RTC driver for MC13783 is hardcoded for CSPI2/SS2.

    This patch makes make MC13783 SPI bus and chip select configurable
    via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit 8c4ebec25b21e355b8488698ec1594da9701fff4
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Fri Aug 29 10:36:17 2008 +0200

    i.MX31: Add reset_timer() and modify get_timer_masked().

    This patch adds the reset_timer() function (needed by nand_base.c) and
    modifies the get_timer_masked() to work in the same way as the omap24xx
    function.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit deeec4991a55de243787002ede24d2331d234fc8
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:09 2008 +0200

    ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:09 2008 +0200

    bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0e8d158664a913392cb01fb11a948d83f72e105e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:06 2008 +0200

    rename CFG_ENV macros to CONFIG_ENV

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:05 2008 +0200

    nvedit: rename error comment to CONFIG_ENV_IS_IN_

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b64b775e7546ed138df360ceb3a71ee358cb9a01
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:05 2008 +0200

    cmd_mem: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:05 2008 +0200

    move cmd_get_data_size to command.c

    add CMD_DATA_SIZE macro to enable it

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 507641d2491980531932b9f25dab37fe5e6c3a1a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:04 2008 +0200

    env_flash: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 5a1aceb0689e2f731491838970884a673ef7e7d3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:04 2008 +0200

    rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:03 2008 +0200

    cleanup use of CFG_ENV_IS_IN_FLASH

    - #if CFG_ENV_IS_IN_FLASH
    - #if (CFG_ENV_IS_IN_FLASH == 1)
    - #define CFG_ENV_IS_IN_FLASH 0

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:01 2008 +0200

    rename environment.c in env_embedded.c to reflect is functionality

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c0878af6e32f0fd8e13a6ca315b9add64441115a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:01 2008 +0200

    env_nowhere: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 93f6d72544da4510a146bc4c93d609b0116cde37
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:00 2008 +0200

    rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 2556ef78113b5f089dfcac5da90bf31dd568397b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:00 2008 +0200

    env_sf: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:00 2008 +0200

    rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 55c5f49910ec8225347aa1d211352a84de6649b4
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:48:00 2008 +0200

    env_onenand: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9656138ff1a34d4c4768db6b490deffc40ee674b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:59 2008 +0200

    rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 957a0e69575683efd70ace147746bbb3d8e7c501
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:59 2008 +0200

    env_nvram: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9314cee6917444ab88bd4e758da7a30975120187
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:59 2008 +0200

    rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:59 2008 +0200

    env_nand: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 51bfee192099206a4397f15f3b93516e01f58ab0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:58 2008 +0200

    rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:58 2008 +0200

    env_dataflash: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 057c849c45b9ee19df8ff3acdeee66be52819962
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:58 2008 +0200

    rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Sep 10 22:47:52 2008 +0200

    cmd_eeprom: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Sep 5 09:19:54 2008 +0200

    env_eeprom: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Sep 5 09:19:30 2008 +0200

    rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 32628c5008105a732212003d83b75f05e5243bb2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 30 23:54:58 2008 +0200

    cmd_mac: Move conditional compilation to Makefile

    finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
    start in commit ad8f8687b78c3e917b173f038926695383c55555

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit e5648acab153f0f429bfc714902c5aaa7879f71b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 30 23:47:41 2008 +0200

    cmd_fdc: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 30 23:47:38 2008 +0200

    common/Makefile: add core command section

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 30 23:29:57 2008 +0200

    cmd_vfd: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6644641d072aee3087da129d8443187196a4d8a9
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Sep 10 11:48:49 2008 -0500

    delta, zylonite: Update nand_oobinfo to nand_ecclayout.

    This is part of the switch to newer upstream MTD code.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Sat Aug 30 17:06:55 2008 -0400

    ARM DaVinci: Fix broken HW ECC for large page NAND.

    Based on original patch by Bernard Blackham <bernard@largestprime.net>

    U-boot's HW ECC support for large page NAND on Davinci is completely
    broken.  Some kernels, such as the 2.6.10 one supported by
    MontaVista for DaVinci, rely upon this broken behaviour as they
    share the same code for ECCs. In the existing scheme, error
    detection *might* work on large page, but error correction
    definitely does not.  Small page ECC correction works, but the
    format is not compatible with the mainline git kernel.

    This patch adds ECC code that matches what is currently in the
    Davinci git repository (since NAND support was added in 2.6.24).
    This makes the ECC and OOB layout written by u-boot compatible with
    Linux for both small page and large page devices and fixes ECC
    correction for large page devices.

    The old behaviour can be restored by defining the macro
    CFG_DAVINCI_BROKEN_ECC, which is undefined by default.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Acked-by: Sergey Kubushyn <ksi@koi8.net>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Sep 10 11:15:28 2008 +0200

    muas3001: update BR4 settings

    Also set up the port pins for using I2C.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 3591293509e0c0bcf244b0f974775bff2e25697e
Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
Date:	Wed Sep 10 09:43:49 2008 +0300

    autoscr: Fix one-character lines and non-newline terminated scripts

    When not using hush, the autoscr command now executes lines that are
    only one character long. It also runs the last line of scripts even if
    it does not end in a newline.

    Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>

commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
Author: Victor Gallardo <vgallardo@amcc.com>
Date:	Tue Sep 9 15:13:29 2008 -0700

    ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR

    On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
    and glacier.

    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>

commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
Author: Heiko Schocher <hs@denx.de>
Date:	Mon Sep 8 10:21:11 2008 +0200

    muas3001: added support for the LM75 sensor.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
Author: Heiko Schocher <hs@denx.de>
Date:	Mon Sep 8 10:20:19 2008 +0200

    muas3001: activate WDT for the muas3001 board.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
Author: Heiko Schocher <hs@denx.de>
Date:	Mon Sep 8 10:19:36 2008 +0200

    muas3001: added 64MB SDRAM autodetection.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 5251469943895de4bb9a04d5053352cc22acb7d5
Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Date:	Thu Aug 21 07:12:26 2008 -0700

    Fix printf errors under -DDEBUG

    Fix printf format-string/arg mismatches under -DDEBUG.

    These warnings occur with DEBUG defined for a platform using
    cpu/mpc85xx.  Users of other architectures can unearth similar
    problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
    after "CFLAGS += $(call cc-option,-fno-stack-protector)".

    Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 23:55:18 2008 +0200

    Update CHANGELOG, prepare 2008-10-rc1 release

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Sep 8 08:51:29 2008 -0500

    85xx: Ensure timebase is zero on secondary cores

    The e500um says the timebase is volatile out of reset.  To ensure
    TB sync works we need to make sure its zero.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 9 22:18:24 2008 +0200

    bootm_load_os: fix load_end debug message

    print load_end value not pointer

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1d9af0be764960e6cc1c093e97176c3542796820
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 9 22:18:23 2008 +0200

    bootm: enable fdt support only on ppc, m68k and sparc

    ...as done in image.c

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 748b5274e76f81df85cfcffaffedc323678d0623
Author: Markus Heidelberg <markus.heidelberg@web.de>
Date:	Tue Sep 9 18:51:05 2008 +0200

    common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)

    Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>

commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
Author: Markus Heidelberg <markus.heidelberg@web.de>
Date:	Tue Sep 9 17:31:46 2008 +0200

    gitignore: add tags files and Vim swap file

    Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>

commit 1d9b67b23fca6a25154333733204339802510720
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Tue Sep 9 17:52:47 2008 +0900

    add board_eth_init() for sh7785lcr board

    Fix the problem that cannot work RTL8169 on sh7785lcr board.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>

commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Aug 6 16:08:41 2008 -0500

    mtd: SPI Flash: Support the STMicro Flash

    Add MTD SPI Flash support for M25P16, M25P20, M25P32,
    M25P40, M25P64, M25P80, M25P128.

    Signed-off-by: Jason McMullan <mcmullan@netapp.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 17:55:31 2008 +0200

    trab: fix build problem after change to use do_div()

    We must link with libgeneric now.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
Author: Ryan CHEN <ryan.chen@st.com>
Date:	Wed Aug 20 13:00:17 2008 -0400

    Correct drv_usb_kbd_init function

    The patch is that check if usb_get_dev_index() function return valid
    pointer. If valid, continue. Otherwise return -1.

    Signed-off-by: Ryan Chen <ryan.chen@st.com>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Aug 20 11:22:02 2008 +0200

    Make usb-stop() safe to call multiple times in a row.

    A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
    enabled the usb_stop() command in common/cmd_bootm.c which was
    not enabled for some time, because no board did actually set the
    CFG_CMD_USB flag. So, now the usb_stop() is executed before
    loading the linux kernel.

    However, the usb_ohci driver hangs up (at least on AT91SAM) if the
    driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
    If some other piece of code calls usb_stop() before the bootm command,
    this command will hangup the system during boot.
    (usb start and stop is typically used while booting from usb memory stick)

    But, stopping the usb stack twice is useless anyway, and a flag already
    existed that kept track on the usb_init()/usb_stop() calls.
    So, we now check if the usb stack is really started before we stop it.

    This problem is now fixed in both the upper as low-level layer.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 16:55:47 2008 +0200

    Makefile: fix bug introduced by commit 47ffd6c2

commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Tue Sep 9 10:00:33 2008 -0400

    ppc4xx: ppc440-generic-ALL: Fix out of tree build v2

    This patch solves the problems compiling ml507, v5fx30teval and
    ppc440-generic out of tree.

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
Author: Nícolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
Date:	Thu Sep 4 15:35:46 2008 -0300

    Fix dev_print when called from usb_stor_info (usb storage command)

    Fix output of the usb storage command. It was printing "Device 0: not
    available" because IF_TYPE_USB was not included into the switch
    statement.

    Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>

commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Sep 9 12:58:16 2008 +0200

    FIT: make iminfo check hashes of all images in FIT, return 1 on failed check

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 919f550dc11a13abf01c6bc713c968de790b8d7c
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Sep 9 12:58:15 2008 +0200

    FIT: add ability to check hashes of all images in FIT, improve output

    - add function fit_all_image_check_hashes() that verifies if all
      hashes of all images in the FIT are valid
    - improve output of fit_image_check_hashes() when the hash check fails

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 1de1fa408967cef6804bb046b904114519bb36f0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 8 20:54:39 2008 +0200

    qemu_mips: Update linux bootm to support dynamic cmdline

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Sep 8 14:56:49 2008 -0500

    Add support for booting of INTEGRITY operating system uImages

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 8 21:01:29 2008 +0200

    mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Sep 8 13:57:12 2008 -0500

    Remove support for booting ARTOS images

    Pantelis Antoniou stated:
	AFAIK, it is still used but the products using PPC are long gone.
	Nuke it plz (from orbit).

    So remove it since it cleans up a usage of env_get_char outside of
    the environment code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 15:45:18 2008 +0200

    Makefile: compile and link each module just once

    Several source files need to be compiled and linked when one or more
    config options are selected. To allow for easy selection in the
    Makefiles yet to avoild multiple compilation (which costs build time)
    and especially multiple linking (which causes errors), we use
    "COBJS = $(sort COBJS-y)" which eliminates duplicates.

    By courtesy of Detlev Zundel who suggested this approach.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 48d0192fe869948fef14b460b5f0c85bca933693
Author: Andreas Engel <andreas.engel@ericsson.com>
Date:	Mon Sep 8 14:30:53 2008 +0200

    Moved conditional compile into Makefile

    Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>

commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
Author: Andreas Engel <andreas.engel@ericsson.com>
Date:	Mon Sep 8 10:17:31 2008 +0200

    Merged serial_pl010.c and serial_pl011.c.

    They only differ in the init function.
    This also adds the missing watchdog support for the PL011.

    Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>

commit 0817d688f307ee2c0598e79175c94a40ce90337b
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Sun Sep 7 17:10:27 2008 -0400

    Remove gap fill in srec object v2

    SREC files do not need gap fill: The load address is specified in the
    file. On the other hand, it can't be avoided in a .bin object. It has
    no information about memory location.

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
Author: Markus Heidelberg <markus.heidelberg@web.de>
Date:	Sun Sep 7 20:18:27 2008 +0200

    README: fix missing subdirectory in the documentation

    Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>

commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
Author: Graeme Russ <graeme.russ@gmail.com>
Date:	Sun Sep 7 07:08:42 2008 +1000

    Update i386 code (sc520_cdp)

    Attempt to bring i386 / sc520 inline with master

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 5608692104efa8d56df803dc79ea41ac3607eee5
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Sep 4 13:01:49 2008 +0200

    fw_env: add NAND support

    Add support for environment in NAND with automatic NOR / NAND recognition,
    including unaligned environment, bad-block skipping, redundant environment
    copy.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 9 09:50:24 2008 +0200

    ppc4xx: Fix out-of-tree building of CPCI405 variants

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit 59f630588e3fdbd698a0a2798e52a8924e899563
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Aug 15 15:42:11 2008 +0200

    Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit e64987a892353f3d49eb242d997820ef8f538912
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Aug 15 15:42:13 2008 +0200

    85xx: socrates: Enable Lime support.

    This patch adds Lime GDC support together with support for the PWM
    backlight control through the w83782d chip.  The reset pin of the
    latter is attached to GPIO, so we need to reset it in
    early_board_init_r.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 3e79b588b5199f35016f178fc0d5d1266382097f
Author: Detlev Zundel <dzu@denx.de>
Date:	Fri Aug 15 15:42:12 2008 +0200

    85xx: Socrates: Major code update.

    - Update the local bus ranges in the FDT for Linux for the various
      devices connected to the local bus via chip-select.

    - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
      lower than 66 MHz and uses I/O accessor functions consequently.

    - UPM data update.

    - Update of default environment and configuration.	Use I2C multibus
      as we do have two I2C buses.  Also enable sdram and ext2 commands.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit e8d18541c6ceab821f75faab031740b33fdbfa4b
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Jul 18 16:52:23 2008 +0200

    Update Freescale 85xx boards to sys_eeprom.c

    The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
    format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
    86xx boards already use sys_eeprom.c, so this patch migrates the remaining
    Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 10:08:02 2008 +0200

    lib_ppc/interrupts.c: make board_show_activity() a weak function

    This allows to use show_activity() without having to
    define an empty board_show_activity() function.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit fe876787f8743883ce58fed61525eaa2f34da4c5
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 10:06:44 2008 +0200

    stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 965de106ba8900372c8b16dc60d5acab7f925e38
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 9 10:03:47 2008 +0200

    NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Aug 15 15:42:11 2008 +0200

    Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 36241ca29d4804a1006fb3f26069effda5202581
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Aug 15 15:42:13 2008 +0200

    85xx: socrates: Enable Lime support.

    This patch adds Lime GDC support together with support for the PWM
    backlight control through the w83782d chip.  The reset pin of the
    latter is attached to GPIO, so we need to reset it in
    early_board_init_r.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
Author: Detlev Zundel <dzu@denx.de>
Date:	Fri Aug 15 15:42:12 2008 +0200

    85xx: Socrates: Major code update.

    - Update the local bus ranges in the FDT for Linux for the various
      devices connected to the local bus via chip-select.

    - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
      lower than 66 MHz and uses I/O accessor functions consequently.

    - UPM data update.

    - Update of default environment and configuration.	Use I2C multibus
      as we do have two I2C buses.  Also enable sdram and ext2 commands.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 9 01:22:39 2008 +0200

    disk-on-chip: remove duplicate doc_probe declaration

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 9 00:59:40 2008 +0200

    onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 9 00:59:39 2008 +0200

    rs5c372: fix rtc_set prototype

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Thu Aug 14 14:08:28 2008 +0200

    ARM: fix warning: target CPU does not support interworking

    This patch fixes warnings like this:

    start.S:0: warning: target CPU does not support interworking

    which come from some ARM cross compilers and are caused by hard-coded
    (with "--with-cpu=arm9" configuration option) ARM targets (which
    support ARM Thumb instructions), while the ARM target selected from
    the command line (with "-march=armv4") doesn't support Thumb
    instructions.

    This warning is issued by the compiler regardless of the real use of
    the Thumb instructions in code.

    To fix this problem, we use options according to compiler version
    being used.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4265c35fbcb248e58179007621d61d32d0b3b82a
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Thu Aug 14 14:08:28 2008 +0200

    ARM: Use do_div() instead of division for "long long".

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 8febd13c69cb68652577d1a9fcbde954bf784155
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Jul 18 16:52:23 2008 +0200

    Update Freescale 85xx boards to sys_eeprom.c

    The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
    format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
    86xx boards already use sys_eeprom.c, so this patch migrates the remaining
    Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Sep 8 23:26:22 2008 +0200

    lib_arm/bootm.c: fix compile warnings

    bootm.c:128: warning: label 'error' defined but not used
    bootm.c:65: warning: unused variable 'ret'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2e3c867d0a63c563a51e65b776973b008f16cec5
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Sep 8 22:46:42 2008 +0200

    ml507: fix out of tree build problem

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Sep 8 22:10:28 2008 +0200

    common/cmd_bootm.c: fix printf() format warnings

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Sep 8 22:37:45 2008 +0200

    BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings

    missing doc_probe() prototype.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2c5e3cc4994897d364b148942ff23e47783198f6
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Sep 8 21:28:14 2008 +0200

    mk48t59: fix compile problem introduced by commit d1e23194

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5ff889349d2ace13f10c9335e09365fcec8247cc
Author: Stefan Roese <sr@denx.de>
Date:	Mon Sep 8 14:11:12 2008 +0200

    ppc4xx: Move ppc4xx specific prototypes to ppc4xx header

    This patch moves some 4xx specific prototypes out of include common.h
    to a ppc4xx specific header.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ac53ee8318678190bf3c68da477a84a657d86fb0
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Sep 5 15:34:04 2008 +0200

    ppc4xx: Update CPCI405(AB) configuration

    This patch add FDT support and command line editing capabilities
    for CPCI405 and CPCI405AB boards.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Sep 5 15:34:03 2008 +0200

    ppc4xx: Cleanup CPCI405 linker script

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Sep 5 15:34:02 2008 +0200

    ppc4xx: Update CPCI405 variants handling

    This patch replaces the BOARD_REVISION variable in include/config.mk
    by a using a temporary include file in the platform directory.

    The former way does not work anymore and the latter is also used by
    some other boards.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
Author: Stefan Roese <sr@denx.de>
Date:	Mon Sep 8 10:01:48 2008 +0200

    ppc4xx: Remove CONFIG_CS8952_PHY define

    Since this define is only used on one board that was never really in
    production, removing this compile time option doesn't hurt and makes
    the code more readable.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
Author: Stefan Roese <sr@denx.de>
Date:	Fri Sep 5 14:11:40 2008 +0200

    ppc4xx: Fix compilation warning for PIP405

    This patch fixes a compilation warning for the PIP405 board. It moves the
    #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
    occur anymore. I am a little unsure if this #ifdef is at the correct
    place now or if it could be removed completely. This needs to get
    tested on the PIP405 board.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
Author: Stefan Roese <sr@denx.de>
Date:	Fri Sep 5 14:09:09 2008 +0200

    ppc4xx: Fix compilation warning for canyonlands & glacier

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Sep 5 14:40:29 2008 -0500

    Fix compiler warning in mpc8xxx ddr code

    ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
    ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
    ctrl_regs.c:523: note: 'caslat' was declared here

    Add a warning in DDR1 case if cas_latency isn't a value we know about.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 1 23:06:23 2008 +0200

    rtc: allow rtc_set to return an error and use it in cmd_date

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 1 01:16:33 2008 +0200

    ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sun Aug 31 05:37:04 2008 +0900

    config.mk: Move arch-specific condition to $(ARCH)_config.mk

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 29 19:08:29 2008 -0500

    Prevent crash if random/invalid ramdisks are passed to bootm

    Adds returning an error from the ramdisk detection code if
    its not a real ramdisk (invalid).  There is no reason we can't
    just return back to the console if we detect an invalid
    ramdisk or CRC error.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Aug 29 21:04:45 2008 +0200

    Prevent crash if random DTB address is passed to bootm

    This patch adds bootm_start() return value check. If
    error status is returned, we do not proceed further to
    prevent board reset or crash as we still can recover
    at this point.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
Author: Andrew Dyer <adyer@righthandtech.com>
Date:	Fri Aug 29 12:30:39 2008 -0500

    clean up some #if !defined() in drivers/video/cfb_console.c

    rearrange some #if !defined() / #else / #endif statements to remove
    the negative logic.

    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>

commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Fri Aug 29 09:02:20 2008 +0900

    apollon: use the last memory area for u-boot

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Aug 28 13:50:42 2008 +0200

    TQM8272: move NAND part in seperate File

    I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
    because I have no longer access to the hardware.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Aug 28 13:48:36 2008 +0200

    TQM8272: Fix compiling error for the TQM8272 board.

    Fix compile problems caused by
    commit  cfa460adfdefcc30d104e1a9ee44994ee349bb7b

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 1a7f8ccec981648ccd38fca2535490582eee08e6
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Wed Aug 27 14:45:20 2008 +0900

    Add JFFS2 command support on OneNAND

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
Author: Mark Jackson <mpfj@mimc.co.uk>
Date:	Mon Aug 25 19:21:30 2008 +0100

    Allow console input to be disabled

    Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.

    When CONFIG_DISABLE_CONSOLE is defined, setting
    GD_FLG_DISABLE_CONSOLE disables all console input and output.

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

commit 2b22d608f370565c87f55928b524207031419c11
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Wed Jul 30 12:39:29 2008 +0200

    loads: allow negative offsets

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu Sep 4 11:19:05 2008 +0200

    USB EHCI: reset root hub

    Some of multi-function USB controllers (e.g. ISP1562) allow root hub
    resetting only via EHCI registers. So, this patch adds the
    corresponding kind of reset to OHCI's hc_reset() if the newly
    introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
    board).

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit 5875d358f025c1b042d8a0f08384b756de7256c9
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Fri Aug 15 15:42:09 2008 +0200

    RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
Author: Stefan Roese <sr@denx.de>
Date:	Fri Sep 5 10:47:46 2008 +0200

    devices: Use list_add_tail() instead of list_add() to register a device

    This patch fixes a problem spotted on Glacier/Canyonlands (and most
    likely lots of other board ports), that no serial output was seen
    after console initialization in console_init_r(). This is because the
    last added console device was used instead of the first added.

    This patch fixes this problem by using list_add_tail() instead of
    list_add() to register a device. This way the first added console
    is used again.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 78d78236896d62bb8ca7302af38d8f1493eb2651
Author: Victor Gallardo <vgallardo@amcc.com>
Date:	Thu Sep 4 23:49:36 2008 -0700

    ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY

    This patch adds GPCS, SGMII and M88E1112 PHY support
    for the AMCC PPC460GT/EX processors.

    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
Author: Adam Graham <agraham@amcc.com>
Date:	Wed Sep 3 12:26:59 2008 -0700

    ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 075d0b81e896e8735ae26372cd384f87cbd24e41
Author: Adam Graham <agraham@amcc.com>
Date:	Wed Sep 3 12:26:28 2008 -0700

    ppc4xx: IBM Memory Controller DDR autocalibration routines

    Alternate SDRAM DDR autocalibration routine that can be generically used
    for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
    support of more DIMM/memory chip vendors and gets the DDR autocalibration
    values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).

    Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
    "Method_A" and "Method_B".	DDR autocalibration Method_A scans the full range
    of possible PPC4xx	SDRAM Controller DDR autocalibration values and takes a
    lot longer to run than Method_B.  Method_B executes in the same amount of time
    as the currently existing DDR autocalibration routine, i.e. 1 second or so.
    Normally Method_B is used and it is set as the default method.

    The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
    Controller registers.[bit-field]:
    1)	SDRAM0_RQDC.[RQFD]
    2)	SDRAM0_RFDC.[RFFD]

    This alternate PPC4xx DDR autocalibration code calibrates the following
    IBM SDRAM Controller registers.[bit-field]:

    1)	SDRAM0_WRDTR.[WDTR]
    2)	SDRAM0_CLKTR.[CKTR]
    3)	SDRAM0_RQDC.[RQFD]
    4)	SDRAM0_RFDC.[RFFD]

    and will also use the calibrated settings of the above four registers that
    produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
    register.[bit-field].

    Signed-off-by: Adam Graham <agraham@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit e07f4a8033b6270b8103049adb6456f660ff4a89
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Mon Sep 1 13:09:39 2008 -0400

    ppc44x: Unification of virtex5 pp440 boards

    This patch provides an unificated way of handling xilinx v5 ppc440 boards.

    It unificates 3 different things:

    1) Source code
    A new board called ppc440-generic has been created. This board includes
    a generic tlb initialization (Maps the whole memory into virtual) and
    defines board_pre_init, checkboard, initdram and get_sys_info weakly,
    so, they can be replaced by specific functions.

    If a new board needs to redefine any of the previous functions
    (specific initialization) it can create a new directory with the
    specific initializations needed. (see the example ml507 board).

    2) Configuration file
    Common configurations are located under configs/xilinx-ppc440.h, this
    header file interpretes the xparameters file generated by EDK and
    configurates u-boot in correspondence. Example: if there is a Temac,
    allows CMD_CONFIG_NET
    Specific configuration are located under specific configuration file.
    (see the example ml507 board)

    3) Makefile
    Some work has been done in order to not duplicate work in the Main
    Makefile. Please see the attached code.

    In order to support new boards they can be implemented in the next way:

    a) Simple Generic Board  (90% of the time)
    Using EDK generates a new xparameters.h file, replace
    ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
    && make

    b) Simple Boards with special u-boot parameters (9 % of the time)
    Create a new file under configs for it (use ml507.h as example) and
    change your paramaters. Create a new Makefile paragraph and compile

    c) Complex boards (1% of the time)
    Create a new folder for the board, like the ml507

    Finally, it adds support for the Avnet FX30T Evaluation board, following
    the new generic structure:

    Cheap board by Avnet for evaluating the Virtex5 FX technology.

    This patch adds support for:
     - UartLite
     - 16MB Flash
     - 64MB RAM

    Prior using U-boot in this board, read carefully the ERRATA by Avnet
    to solve some memory initialization issues.

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
Author: Nick Spence <nick.spence@freescale.com>
Date:	Tue Sep 2 15:21:16 2008 -0500

    mpc83xx: fix mpc8313 in-tree building with NAND

    and add mpc8313 NAND build to MAKEALL

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
Author: Nick Spence <nick.spence@freescale.com>
Date:	Thu Aug 28 14:09:25 2008 -0700

    mpc83xx: clean up cache operations and unlock_ram_in_cache() functions

    Cleans up some latent issues with the data cache control so that
    dcache_enable() and dcache_disable() will work reliably (after
    unlock_ram_in_cache() has been called)

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
Author: Nick Spence <nick.spence@freescale.com>
Date:	Thu Aug 28 14:09:19 2008 -0700

    mpc83xx: Store and display Arbiter Event Register values

    Record the Arbiter Event Register values and optionally display them.

    The Arbiter Event Register can record the type and effective address of
    an arbiter error, even through an HRESET. This patch stores the values in
    the global data structure.

    Display of the Arbiter Event registers immediately after the RSR value
    can be enabled with defines. The Arbiter values will only be displayed
    if an arbiter event has occured since the last Power On Reset, and either
    of the following defines exist:
     #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
					and type register values
     #define CONFIG_DISPLAY_AER_FULL  - display and interpret the arbiter
					event register values

    Address Only transactions are one of the trapped events that can register
    as an arbiter event. They occur with some cache manipulation instructions
    if the HID0_ABE (Address Broadcast Enable) is set and the memory region
    has the MEMORY_COHERENCE WIMG bit set. Setting:
     #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
				  only events, so that it can still capture
				  other real problems.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
Author: Nick Spence <nick.spence@freescale.com>
Date:	Thu Aug 28 14:09:11 2008 -0700

    mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache

    This is needed in unlock_ram_in_cache() because it is called from C and
    will corrupt the small data area anchor that is kept in R2.

    lock_ram_in_cache() is modified similarly as good coding practice, but
    is not called from C.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
Author: Nick Spence <nick.spence@freescale.com>
Date:	Fri Aug 22 23:52:50 2008 -0700

    MPC83XX: Fix GPIO configuration - set gpio level before direction

    Set DAT value before DIR values to avoid creating glitches on the
    GPIO signals.

    Set gpio level register before direction register to inhibit
    glitches on high level output pins.

    Dir and data gets cleared at powerup, so high level output lines see
    a short low pulse between setting the direction and level registers.

    Issue was seen on a new board with the nReset line of the NOR flash
    connected to a GPIO. Setting the direction register puts the NOR flash
    in reset so the next instruction to set the level cannot get executed.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 7007c5975ee900ad70983b0681d3251e221f8321
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Sep 2 02:58:32 2008 +0200

    doc/qemu_mips: add doc howto debug u-boot with gdb

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Wed Sep 3 17:15:45 2008 +0200

    ppx4xx: Fix broken DASA_SIM board

    This patch adds initdram() to DASA_SIM boards that has been
    removed accidentally by a previous commit.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
Author: Stefan Roese <sr@denx.de>
Date:	Mon Sep 1 08:35:37 2008 +0200

    ppc4xx: Remove reference to common/lists.o from some esd linker scripts

    This patch removes some direct references to common/lists.o from some
    esd linker scripts. This is necessary because the lists source was moved
    and is not in the "common" directory anymore.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 97b0734d65f8a0b03df0a335a2addc759da56107
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 16:33:05 2008 +0200

    ppc4xx: Remove obsolete or unused functions from some esd boards

    This patch removes initdram() and testdram() from most esd 405 platforms.
    Some boards also have an empty dummy implementation of
    misc_init_f(). This is also removed.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 15:07:54 2008 +0200

    ppc4xx: Update VOM405 board configuration

    - remove PCI code
    - add command line editing
    - minor cleanup

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 15:07:53 2008 +0200

    ppc4xx: Remove obsolete initdram() function from VOM405 board

    This patch removed the obsolete initdram() function from
    VOM405 platform file.

    Some minor cleanup.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 15:07:52 2008 +0200

    ppc4xx: Cleanup VOM405 linker script

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
Author: Matthias Fuchs <mf@esd.eu>
Date:	Tue Sep 2 15:07:51 2008 +0200

    ppc4xx: Add fdt support for VOM405 boards

    Signed-off-by: Matthias Fuchs <mf@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 11:36:14 2008 +0200

    ppc4xx: Coding style cleanup

    Wrap long lines etc.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 11:35:56 2008 +0200

    ppc4xx: Enable USB on PLU405 boards

    This patch enables the PCI-OHCI controller on PLU405 board.

    Also the default CPU frequency is updated to 266 MHz and
    command line editing is enabled.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 11:35:35 2008 +0200

    ppc4xx: Cleanup PLU405 platform file

    This patch
    - wraps some long lines
    - removes unused/obsolete functions: misc_init_f() and initdram()

    Signed-off-by: Matthias Fuchs <mf@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 11:35:04 2008 +0200

    ppc4xx: Cleanup PLU405 linker script

    Signed-off-by: Matthias Fuchs <mf@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 11:34:36 2008 +0200

    ppc4xx: Add fdt support for PLU405 boards

    Signed-off-by: Matthias Fuchs <mf@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Sep 2 11:34:08 2008 +0200

    ppc4xx: Increase U-Boot size to 384kB for PLU405 boards

    Signed-off-by: Matthias Fuchs <mf@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit be1b0d2777e179191a57b138b660547a17e55aad
Author: Jochen Friedrich <jochen@scram.de>
Date:	Tue Sep 2 11:24:59 2008 +0200

    Don't tftp to unknown flash

    If a board has a variable number of flash banks, there are empty entries
    in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
    "Outside available Flash". This patch skips flash banks with unknown
    flash ids.

    Signed-off-by: Jochen Friedrich <jochen@scram.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Aug 28 13:40:44 2008 +0900

    net: smc911x: Add pkt_data_pull and pkt_data_push function

    The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
    Byte-swapping is necessary, and so poor performance is inevitable.
    This problem cannot evade by the swap function of CHIP, this can
    evade by software Byte-swapping.
    And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
    functions necessary to solve this problem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 20:37:00 2008 -0700

    Moved initialization of EEPRO100 Ethernet controller to board_eth_init()

    Affected boards:
	db64360
	db64460
	katmai
	taihu
	taishan
	yucca
	cpc45
	cpu87
	eXalion
	elppc
	debris
	kvme080
	mpc8315erdb
	integratorap
	ixdp425
	oxc
	pm826
	pm828
	pm854
	pm856
	ppmc7xx
	sc3
	sc520_spunk
	sorcery
	tqm8272
	tqm85xx
	utx8245

    Removed initialization of the driver from net/eth.c
    Also, wrapped contents of pci_eth_init() by CONFIG_PCI.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:45:44 2008 -0700

    Moved initialization of TULIP Ethernet controller to board_eth_init()

    Affected boards:
	cu824
	bab7xx
	adciop
	dasa_sim
	mousse
	mpc8540eval
	musenki
	mvblue
	pcippc2/pcippc6
	sbc8240
	stxssa

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:44:19 2008 -0700

    Moved initialization of E1000 Ethernet controller to board_eth_init()

    Affected boards:
	ap1000
	mvbc_p
	PM854

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:40:51 2008 -0700

    Moved initialization of plb2800 Ethernet driver to board_eth_init

    Affected boards:
	purple

    Removed initialization of controller from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:39:12 2008 -0700

    Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory

    Modified board_eth_init() functions of boards that have this FEC in addition
    to other Ethernet controllers.

    Affected boards:
	bc3450
	icecube
	mvbc_p
	o2dnt
	pm520
	total5200
	tq5200

    Removed initialization of controller from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:36:38 2008 -0700

    Moved initialization of MPC512x_FEC Ethernet driver to CPU directory

    Added a cpu_eth_init() function to MPC512x CPU directory and
    removed code from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 8218bd2aa68820b878a8413493ae17fd8d21f944
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:16:59 2008 -0700

    Moved initialization of IncaIP Ethernet controller to board_eth_init

    Affected boards:
	IncaIP

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:15:26 2008 -0700

    Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()

	Affected boards:
	    AmigaOneG3SE

	Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 6aca145e067efe75398e9fac97822bd3700de0b2
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:13:34 2008 -0700

    Moved initialization of GT6426x Ethernet controller to board_eth_init()

    Affected boards:
	EVB64260
	P3G4
	ZUMA

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e3090534d62045dcb73f5392bacc64a4e8e443dc
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:08:43 2008 -0700

    Moved initialization of PCNET Ethernet controller to board_eth_init()

    Affected boards:
	PN62
	sc520_cdp

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:07:16 2008 -0700

    Moved initialization of NATSEMI Ethernet controller to board_eth_init()

    Affected boards:
	a3000

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 10:03:22 2008 -0700

    Moved initialization of NS8382X Ethernet controller to board_eth_init()

    Affected boards:
	bc3450
	cpci5200
	mecp5200
	pf2000
	icecube
	o2dnt
	pm520
	sandpoint8245
	total5200
	tqm5200

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 09:59:33 2008 -0700

    Moved initialization of TSI108 Ethernet controller to board_eth_init()

    Affected boards:
	mpc7448hpc2

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 0b252f50ae218ae15bfb63af44227972686ebc56
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 21:41:08 2008 -0700

    Moved initialization of RTL8139 Ethernet controller to board_eth_init()

    Affected boards:
	hidden_dragon
	MPC8544DS
	MPC8610HPCN
	R2DPLUS
	TB0229

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 09:49:42 2008 -0700

    Moved initialization of RTL8169 Ethernet controller to board_eth_init()

    Affected boards:
	linkstation
	r7780mp

    Removed initialization of the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3ae071e44256144d6c1e3febb65f6c56bd433769
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Tue Aug 12 22:11:53 2008 -0700

    Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()

    Removed at91sam9_eth_initialize() from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Aug 31 22:22:04 2008 -0700

    Introduce netdev.h header file and remove externs

    This addresses all drivers whose initializers have already
    been moved to board_eth_init()/cpu_eth_init().

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
Author: Andy Fleming <afleming@freescale.com>
Date:	Sun Aug 31 16:33:30 2008 -0500

    Add pixis_set_sgmii command

    The 8544DS and 8572DS platforms support an optional SGMII riser card to
    expose ethernet over an SGMII interface.  Once the card is in, it is also
    necessary to configure the board such that it uses the card, rather than
    the on-board ethernet ports.  This can either be done by flipping dip switches
    on the motherboard, or by modifying registers in the pixis.  Either way
    requires a reboot.

    This adds a command to allow users to choose which ports are routed through
    the SGMII card, and which through the onboard ports.  It also allows users
    to revert to the current switch settings.

    This code does not work on the 8572, as the PIXIS is different.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
Author: Andy Fleming <afleming@freescale.com>
Date:	Sun Aug 31 16:33:29 2008 -0500

    Add SGMII support for the 8544 DS

    The 8544 DS has an optional SGMII Riser card, which uses different PHY
    addresses.	Check if we are in SGMII mode, and invoke the SGMII Riser
    setup code if so.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 652f7c2eef76a1340928bd660845441e932d86a2
Author: Andy Fleming <afleming@freescale.com>
Date:	Sun Aug 31 16:33:28 2008 -0500

    Add support for Freescale SGMII Riser Card

    The 8544DS and 8572DS systems have an optional SGMII riser card which
    exposes new ethernet ports which are connected to the eTSECs via an
    SGMII interface.  The SGMII PHYs for this board are offset from the standard
    PHY addresses, so this code modifies the passed in tsec_info structure to
    use the SGMII PHYs on the card, instead.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
Author: Andy Fleming <afleming@freescale.com>
Date:	Sun Aug 31 16:33:27 2008 -0500

    Add SGMII support to the tsec

    Adds support for configuring the TBI to talk properly with the SerDes.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
Author: Andy Fleming <afleming@freescale.com>
Date:	Sun Aug 31 16:33:26 2008 -0500

    Pass in tsec_info struct through tsec_initialize

    The tsec driver contains a hard-coded array of configuration information
    for the tsec ethernet controllers.	We create a default function that works
    for most tsecs, and allow that to be overridden by board code.  It creates
    an array of tsec_info structures, which are then parsed by the corresponding
    driver instance to determine configuration.  Also, add regs, miiregs, and
    devname fields to the tsec_info structure, so that we don't need the kludgy
    "index" parameter.

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
Author: Andy Fleming <afleming@freescale.com>
Date:	Sun Aug 31 16:33:25 2008 -0500

    tsec: Move tsec.h to include/

    This is to prepare the way for board code passing in the tsec_info structure

    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:52:44 2008 +0200

    PHY: Add support for the M88E1121R Marvell chip.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Sep 2 21:17:36 2008 +0200

    fw_env.c: fix build problems with MTD_VERSION=old

    (as needed to support old 2.4 Linux kernel based releases)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Sep 1 17:11:26 2008 +0200

    device: make device_register() clone the device

    This is expected by the callers, but this fact was hidden well within
    the old list implementation.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c75e772a2f061a508bba28ded1b5bea91f0442b0
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sun Aug 31 23:28:15 2008 +0900

    sh: Remove CC line from board's Makefile

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 468eae0660de6fdfd9999944c536ecc4797bd944
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sun Aug 31 23:25:57 2008 +0900

    sh: Replaced "@./mkconfig" for @$(MKCONFIG)

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Aug 28 14:50:52 2008 +0900

    sh: Add support sh2 to MAKEALL

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6f3d8bb5faa12dbf3031382286784c978df038ee
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Aug 28 14:52:23 2008 +0900

    sh: Fix compile error rsk7203 board

    This boards used old type preprocessor.
    This patch fix compile error.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Aug 28 14:53:31 2008 +0900

    sh: Fix compile error sh7785lcr board

    This boards used old type preprocessor.
    This patch fix compile error.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6f0da4972e48f99d37bc522814940a6022cd3084
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Aug 22 17:39:09 2008 +0900

    sh: Renesas Solutions AP325RXA board support

    AP325RXA is SH7723's reference board.
    This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
    In this patch, support SCIF, NOR Flash, and Ethernet.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit ab09f433b50bb83b5e440c335bc3839ee069e534
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Aug 22 17:48:51 2008 +0900

    sh: add support Renesas SH7723

    Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
    This patch supports CPU register's header file and SCIF serial driver.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c655fad06ba3fb042dbc667724a40e1a9a091248
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sun Aug 31 23:02:04 2008 +0900

    sh: Renesas RSK+ 7203 board support

    This adds initial support for the RTE RSK+ SH7203 board.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Jul 3 23:11:02 2008 +0900

    sh: Add support Renesas SH7203 processor

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sun Aug 31 22:48:33 2008 +0900

    sh: Add support SH2/SH2A which is CPU of Renesas Technology

    Add support SH2/SH2A basic function.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sun Aug 31 22:45:08 2008 +0900

    sh: Renesas R0P7785LC0011RL board support

    This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
    Graphic, Ethernet, USB, SD, RTC, and I2C controller.

    This patch supports the following functions:
     - 128MB DDR2-SDRAM (29-bit address mode only)
     - NOR Flash
     - USB host
     - Ethernet

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Thu Jul 10 19:32:53 2008 +0900

    sh: add support for SH7785

    Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
    This patch supports CPU register's header file.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit d6e04258be8f2408845468d3cf722a4cf0433445
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Aug 31 04:45:42 2008 +0200

    davinci: fix remaining dm644x_eth

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Aug 31 04:24:56 2008 +0200

    fs: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Aug 31 04:24:55 2008 +0200

    devices: merge to list_head

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ef0255fc75f28655f9681422079287d68a14dbaa
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Aug 31 04:24:51 2008 +0200

    update linux/list

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Aug 31 00:39:48 2008 +0200

    smdk6400: add gitignore

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Aug 31 00:39:48 2008 +0200

    smdk6400: Use CONFIG_FLASH_CFI_DRIVER

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:47 2008 +0200

    smdk6400: remove redundant bootargs definition

    Double bootargs setting leads to a duplicated environmant entry.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 11edcfe260f20dcea79284a3e95270989d433854
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:47 2008 +0200

    ARM: Add support for S3C6400 based SMDK6400 board

    SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
    driver for it too. The board can also boot from the NOR flash, but due to
    hardware limitations it can only address 64KiB on it, which is not enough
    for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit e0056b341069796eaea11eae0fc8eb93a3dceaac
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:47 2008 +0200

    NAND: add NAND driver for S3C64XX

    Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 3fe7b589f9c7463df39056f8872006a67f56a91c
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:47 2008 +0200

    S3C64XX: remove broken HWFLOW support from the serial driver

    As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
    broken and currently unused. Remove it.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:47 2008 +0200

    serial: add S3C64XX serial driver

    Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:46 2008 +0200

    USB: Add support for OHCI controller on S3C6400

    Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
    try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
    it should work too and we could still profit from instruction cache.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 9b07773f8883665b002500c190507e9fd99b7181
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Sun Aug 31 00:39:46 2008 +0200

    ARM: Add arm1176 core with S3C6400 SoC

    Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:	Sun Aug 31 00:39:46 2008 +0200

    ARM DaVinci: Changing function names for EMAC driver

    DM644x is just one of a series of DaVinci chips that use the EMAC driver.
    By replacing all the function names that start with dm644x_* to davinci_*
    we make these function more portable. I have tested this change on my EVM.
    DM6467 is another DaVinci SOC which uses the EMAC driver and i will
    be sending patches that add DaVinci DM6467 support to the list soon.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Sat Aug 30 23:21:30 2008 +0200

    Integrator[AP/CP] - Remove unused file memsetup.S

    - memsetup.s is changed/merged to lowlevel_init.S
      memsetup.S has a global label memsetup that just returns back to caller
    - memsetup global label is changed/merged to lowlevel_init
      This label is not called from anywhere.

    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

commit 89d51d022a63be1a851eda983c8cbce1a044f65f
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Wed Aug 27 21:35:52 2008 +0200

    ARM DaVinci: Standardize names of directories/files

    ARM DaVinci: Standardize names of directories/files.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Fri Jul 11 15:10:13 2008 -0400

    ARM DaVinci: Move common functions to board/davinci/common

    ARM DaVinci: Move common functions to board/davinci/common.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit c2b4b2e4814f4ace9015fdb64132894327400bf0
Author: Stefan Roese <sr@denx.de>
Date:	Fri Aug 29 11:56:49 2008 +0200

    ppc4xx/NAND: Add select_chip function to 4xx NDFC driver

    This function is needed for the new NAND infrastructure. We only need
    a dummy implementation though for the NDFC.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
Author: Stefan Roese <sr@denx.de>
Date:	Fri Aug 29 12:06:27 2008 +0200

    ppc4xx: Increase image size for NAND boot target

    This is needed since now with HUSH enabled (amcc-common.h) the image
    read from NAND exceeds the previous limit.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Thu Aug 28 23:58:30 2008 -0700

    Move MPC512x_FEC driver to drivers/net

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 80b00af01b3c9154774de2936f05a051e92f6a03
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Thu Aug 28 23:58:29 2008 -0700

    Move MPC5xxx_FEC driver to drivers/net

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 29 21:53:57 2008 +0200

    cmd_terminal: remove no need ifdef

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 578118bdf122877ae769776be002255be447b4fa
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 29 21:53:57 2008 +0200

    common/Makefile: order by functionality

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 29 21:53:56 2008 +0200

    miiphyutil: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 81789c39db3f0f6b621df8c0ec66014d701f368e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 29 21:53:37 2008 +0200

    autoscript: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 29 01:18:11 2008 +0200

    crc16: move to lib_generic

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 55195773eacefb22dd483a3c560ea30a14263ce1
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 29 01:18:01 2008 +0200

    miiphybb: move to drivers/net/phy

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit e8314035996a9118ac5948df2ff8a2f2161ed67a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Aug 28 12:31:51 2008 +0200

    soft_spi: move to drivers/spi

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Aug 28 12:31:51 2008 +0200

    soft_i2c: move to drivers/i2c

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 717a222229fdb77703e9174d0eb08a4b41febf49
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Aug 28 12:31:48 2008 +0200

    gunzip: move to lib_generic

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 52aef8f9ba28b747973bf76741c23db658d5773c
Author: Wolfgang Ocker <weo@reccoware.de>
Date:	Tue Aug 26 19:55:23 2008 +0200

    ppc4xx: NAND configuration

    Made NAND bank configuration setting a config variable.

    Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5bc542a593abc9e974fbd34704af85c37c366c60
Author: Victor Gallardo <vgallardo@amcc.com>
Date:	Thu Aug 28 16:03:28 2008 -0700

    ppc4xx: fix UIC external_interrupt hang on UIC0

    This patch fixes a UIC external_interrupt hang if critical or non-critical
    interrupt is set at the same time as a normal interrupt is set on UIC0.

    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
Author: Prodyut  Hazarika <phazarika@amcc.com>
Date:	Wed Aug 27 16:39:00 2008 -0700

    ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller

    Removed Magic numbers from Initialization preload registers
    Tested with Kilauea, Glacier, Canyonlands and Katmai boards
    About 5-7% improvement seen for LMBench memtests

    Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8a490422bed685c9491274ec997f62061d88620b
Author: John Rigby <jrigby@freescale.com>
Date:	Thu Aug 28 13:17:07 2008 -0600

    ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon

    MPC5121 rev 2 silicon has a new register for controlling how long
    CS is asserted after deassertion of ALE in multiplexed mode.

    The default is to assert CS together with ALE.  The alternative
    is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.

    The default is wrong for the NOR flash and CPLD on the ADS5121.

    This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
    it does so conditionally based on silicon rev 2.0 or greater.

    Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
    Signed-off-by: John Rigby <jrigby@freescale.com>

commit 5d9a5efa4b332f442b54a755d49969123c3a8742
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Aug 19 00:56:46 2008 +0600

    Add I2C frequency dividers for ColdFire

    The existing I2C freqency dividers for FDR does not apply
    to ColdFire platforms; thus, a seperate table is added
    based on MCF5xxx Reference Manual

    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: Tabi Timur <timur@freescale.com>

commit eec567a67e00d1ed8d941e9098b7d421f4091abf
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Aug 19 03:01:19 2008 +0600

    ColdFire: I2C fix for multiple platforms

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit d53cf6a9c7423cba668b867978648645f71c3090
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Aug 19 00:37:13 2008 +0600

    ColdFire: Add CONFIG_MII_INIT for M5272C3

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit f78ced3028d4130b24a318943a70cf5584ab16f4
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Aug 19 00:26:25 2008 +0600

    ColdFire: Multiple fixes for MCF5445x platforms

    Add FEC pin set and mii reset in __mii_init(). Change
    legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
    change cfi_offset to 0, and change CFG_FLASH_CFI to
    CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
    M54455EVB env settings in configuration file.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Fri Aug 15 18:24:25 2008 +0000

    ColdFire: Change the SDRAM BRD2WT timing from 3 to 7

    The user manuals recommend 7.

    Signed-off-by: Kurt Mahan <kmahan@freescale.com>
    Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Fri Aug 15 16:50:07 2008 +0000

    ColdFire: Raise uart baudrate to 115200 bps

    M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
    uart baudrate increase from 19200 to 115200 bps

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit ab6ba842682552ccf071d0034da0a20633d1d1ac
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Aug 13 12:07:03 2008 +0000

    ColdFire: Fix board.c warning message

    Implicit declaration of nand_init() warning message

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Aug 27 01:10:34 2008 -0500

    FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Aug 21 20:44:49 2008 +0200

    mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 19 14:46:36 2008 -0500

    mpc85xx: remove redudant code with lib_ppc/interrupts.c

    For some reason we duplicated the majority of code in lib_ppc/interrupts.c
    not show how that happened, but there is no good reason for it.

    Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
    they exist.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Jul 25 13:31:05 2008 -0500

    mpc85xx: Add support for the MPC8536DS reference board

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
    Signed-off-by: Dejan Minic <minic@freescale.com>
    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 12 11:14:19 2008 -0500

    mpc85xx: Add support for the MPC8536

    The MPC8536 Adds SDHC and SATA controllers to the PQ3 family.  We
    also have SERDES init code for the 8536.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
    Signed-off-by: Dejan Minic <minic@freescale.com>
    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 12 11:13:08 2008 -0500

    mpc85xx: Add support for the MPC8572DS reference board

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 457caecdbca3df21a93abff19eab12dbc61b7897
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Aug 27 01:05:35 2008 -0500

    FSL DDR: Remove old SPD support from cpu/mpc85xx

    All 85xx boards have been converted to the new code so we can
    remove the old SPD DDR setup code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0e7927db138976469e7257e29c1338050a50fcd9
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Aug 27 01:04:07 2008 -0500

    FSL DDR: Convert STXSSA to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c360d9b970fbb9c13744c355879671165bbb9b9e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Aug 27 01:03:42 2008 -0500

    FSL DDR: Convert STXGP3 to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8e55313b7ae12352a343f9b9962e662dbd897187
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 23:52:58 2008 -0500

    FSL DDR: Convert SBC8560 to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 23:52:32 2008 -0500

    FSL DDR: Convert MPC8540EVAL to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 23:52:07 2008 -0500

    FSL DDR: Convert PM856 to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d53bd3e17bd4f460257c19255569ea6dcfaae817
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 23:51:49 2008 -0500

    FSL DDR: Convert PM854 to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 33b9079ba20926f14238fff863b68a98e938948e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 23:15:28 2008 -0500

    FSL DDR: Convert sbc8548 to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 23:14:14 2008 -0500

    FSL DDR: Convert atum8548 to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit be0bd8234b9777ecd63c4c686f72af070d886517
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 22:56:56 2008 -0500

    FSL DDR: Convert socrates to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 08:02:30 2008 -0500

    FSL DDR: Convert MPC8544DS to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Mar 18 13:51:05 2008 -0500

    FSL DDR: Convert MPC8568MDS to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Mar 18 13:51:06 2008 -0500

    FSL DDR: Convert MPC8548CDS to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit aa11d85cf318b961e029fe50d68ca47d004bce93
Author: Jon Loeliger <jdl@freescale.com>
Date:	Mon Mar 17 15:48:18 2008 -0500

    FSL DDR: Convert MPC8541CDS to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2b40edb10d81da7bba724edbccd7f53777112579
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Mar 18 11:12:42 2008 -0500

    FSL DDR: Convert MPC8555ADS to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Mar 18 11:12:44 2008 -0500

    FSL DDR: Convert MPC8560ADS to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Jun 6 13:12:18 2008 -0500

    FSL DDR: Convert MPC8540ADS to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 21:34:55 2008 -0500

    FSL DDR: Add 85xx specific register setting

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6fb1b7346849ccd0c20306143e334f5b76143070
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jun 9 11:07:46 2008 -0500

    FSL DDR: Add e500 TLB helper for DDR code

    Provide a helper function that board code can call to map TLBs when
    setting up DDR.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d26b739afe5a6760bd345743188759cd9d0f3b47
Author: Andrew Dyer <adyer@righthandtech.com>
Date:	Tue Aug 26 17:03:38 2008 -0500

    dm9000 remove dead external phy support, gpio fix

    dm9000 has code to detect and initialize external phy parts, but later
    on in the code the part is forced to use the internal phy
    unconditionally.  Remove the unused/untested code.

    change the GPIO initialization so that only the GPIO used as an
    internal phy reset (hardwired in the chip) is set as an output.  The
    remaining GPIO need to be handled by board specific code to prevent
    possible drive conflicts.  Set as inputs for safety.

    replace a few magic numbers with defines

    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Aug 26 11:17:48 2008 -0500

    Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions

    cmd_net.c command descriptions were updated to describe the optional
    hostIPaddr argument.  The dhcp command help message was also updated
    to more closely reflect the other commands in cmd_net.c

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Aug 20 11:30:28 2008 +0200

    Fix bogus error message in the DHCP handler

    The DHCP handler has 1 state that is not listed in this case, causing a
    failure message when there is actually no failure.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Aug 20 11:30:27 2008 +0200

    Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.

    The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
    missing extern inside the net/bootp.h header

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1803f7f91ff35ca402259065df7557107dcf28a2
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Aug 19 21:26:32 2008 +0000

    ColdFire: Add FEC Buffer descriptors in SRAM

    Add FEC Buffer descriptors and data buffer in SRAM for
    faster execution and access.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 429be27ce195210d4b9decf9e867b9ca6155a87d
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Aug 21 23:55:11 2008 +0000

    Fix ColdFire FEC warning messages

    Types mismatch and implicit declaration of icache_invalid()
    warning messages

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 6a002171098e968bd5b362347d2831224fab6048
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sat Jul 12 00:17:50 2008 -0700

    Moved initialization of SKGE Ethernet driver to board code.

    The only board using this driver is the SL8245 board.
    Removed initialization for the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sat Jul 12 00:08:45 2008 -0700

    Moved conditional compilation to Makefile for SK98 Ethernet driver

    Brute-force removal of #ifdefs.  Didn't touch the code.
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 65d3d99c28dc363d15eaee78225ff643df499b97
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Fri Jul 11 23:42:19 2008 -0700

    Moved initialization of ULI526X Ethernet driver to board code.

    The only board using this driver is the Freescale MPC8610HPCD board.
    Removed initialization for the driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Fri Jul 11 23:15:28 2008 -0700

    Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()

    Added board_eth_init() function to bf537-stamp board.
    Removed initialization for the Blackin EMAC driver from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit fc363ce35408f348cacced68505f3747a53e3d7c
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Wed Jul 9 01:04:19 2008 -0700

    Moved initialization of GRETH Ethernet driver to CPU directory

    Added a cpu_eth_init() function to leon2/leon3 CPU directories and
    removed code from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Tue Aug 26 22:16:25 2008 -0700

    Moved initialization of MCFFEC Ethernet driver to CPU directory

    Added a cpu_eth_init() function to coldfire CPU directories and
    removed code from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Tue Aug 26 22:12:36 2008 -0700

    Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory

    Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
    removed code from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:38 2008 -0500

    FSL DDR: Remove old SPD support from cpu/mpc86xx

    All 86xx boards have been converted to the new code so we can
    remove the old SPD DDR setup code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9bd4e5911b750837515466bc7449087698b88e0e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:37 2008 -0500

    FSL DDR: Convert SBC8641D to new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 26 15:01:36 2008 -0500

    FSL DDR: Convert MPC8610HPCD to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:35 2008 -0500

    FSL DDR: Convert MPC8641HPCN to new DDR code.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:34 2008 -0500

    FSL DDR: Add 86xx specific register setting

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 233fdd502a6c227f476212b3097653ad48d7e254
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:32 2008 -0500

    FSL DDR: Add DDR2 DIMM paramter support

    Compute DIMM parameters based upon the SPD information.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 05c05a2363a6ac11e0e405926034546ffad71fad
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:30 2008 -0500

    FSL DDR: Add DDR1 DIMM paramter support

    Compute DIMM parameters based upon the SPD information in spd.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:29 2008 -0500

    FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.

    The main purpose of this rewrite it to be able to share the same
    initialization code on all FSL PowerPC products that have DDR
    controllers.  (83xx, 85xx, 86xx).

    The code is broken up into the following steps:
	GET_SPD
	COMPUTE_DIMM_PARMS
	COMPUTE_COMMON_PARMS
	GATHER_OPTS
	ASSIGN_ADDRESSES
	COMPUTE_REGS
	PROGRAM_REGS

    This allows us to share more code an easily allow for board specific code
    overrides.

    Additionally this code base adds support for >4G of DDR and provides a
    foundation for supporting interleaving on processors with more than one
    controller.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f784e32b4bce0013983506b11af4b85b8ca3d36e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 26 15:01:28 2008 -0500

    FSL DDR: Provide a generic set_ddr_laws()

    Provide a helper function that will setup the last available
    LAWs (upto 2) for DDR.  Useful for SPD/dyanmic DDR setting code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
Author: James Yang <James.Yang@freescale.com>
Date:	Tue Aug 26 15:01:27 2008 -0500

    Add proper SPD definitions for DDR1/2/3

    Also adds helper functions for DDR1/2 to verify the checksum.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 285db74716c724ae8a0ff177878fd09a74428c7b
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Aug 27 01:02:48 2008 +0200

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Aug 19 10:08:49 2008 +0200

    Add support for muas3001 board (MPC8270)

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 322098bff32410d2a00031649b47c4ec90a66d9a
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Tue Aug 19 08:31:18 2008 +0530

    common/cmd_load.c cleanup - remove unused variables

    - Remove unused global variable os_data_count.
    - Remove unused variable z.

    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

commit 306620b762a4f9fa6678568ad2e8772dec145208
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Mon Aug 18 13:35:27 2008 +0200

    remove MVS1 board

    MVS1 board has reached end-of-life and can be removed completely.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:45 2008 -0500

    bootm: refactor do_reset and os boot function args

    There is no need for each OS specific function to call do_reset() we
    can just do it once in bootm. This means its feasible on an error for
    the OS boot function to return.

    Also, remove passing in cmd_tbl_t as its not needed by the OS boot
    functions.	flag isn't currently used but might be in the future so
    we left it alone.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 40afac22a9c602e55c501c800f1c064324711b56
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:44 2008 -0500

    fdt: Added resize command

    Resize the fdt to size + padding to 4k boundary

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:43 2008 -0500

    fdt: refactor initrd related code

    Created a new fdt_initrd() to deal with setting the initrd properties
    in the device tree and fixing up the mem reserve.  We can use this
    both in the choosen node handling and lets us remove some duplicated
    code when we fixup the initrd info in bootm on PPC.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:42 2008 -0500

    fdt: refactor fdt resize code

    Move the fdt resizing code out of ppc specific boot code and into
    common fdt support code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:41 2008 -0500

    bootm: refactor image detection and os load steps

    Created a bootm_start() that handles the parsing and detection of all
    the images that will be used by the bootm command (OS, ramdisk, fdt).
    As part of this we now tract all the relevant image offsets in the
    bootm_headers_t struct. This will allow us to have all the needed
    state for future sub-commands and lets us reduce a bit of arch
    specific code on SPARC.

    Created a bootm_load_os() that deals with decompression and loading
    the OS image.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:40 2008 -0500

    bootm: move lmb into the bootm_headers_t structure

    To allow for persistent state between future bootm subcommands we
    need the lmb to exist in a global state.
    Moving it into the bootm_headers_t allows us to do that.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 54f9c86691309b2f919f567f9255b8bcad2c7651
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:39 2008 -0500

    bootm: Set working fdt address as part of the bootm flow

    Set the fdt working address so "fdt FOO" commands can be used as part
    of the bootm flow.	Also set an the environment variable "fdtaddr"
    with the value.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 06a09918f3903450313e2047a9cc258bf5872f46
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:38 2008 -0500

    bootm: refactor fdt locating and relocation code

    Move the code that handles finding a device tree blob and relocating
    it (if needed) into common code so all arch's have access to it.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:37 2008 -0500

    bootm: refactor ramdisk locating code

    Move determing if we have a ramdisk and where its located into the
    common code. Keep track of the ramdisk start and end in the
    bootm_headers_t image struct.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c160a9544743e80e8889edb2275538e7764ce334
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:36 2008 -0500

    bootm: refactor entry point code

    Move entry point code out of each arch and into common code.
    Keep the entry point in the bootm_headers_t images struct.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 20220d22b9f41446288588cd2e457e0077a18bed
Author: Randy Vinson <rvinson@mvista.com>
Date:	Wed Aug 13 11:44:57 2008 -0700

    mpc7448hpc2: Fix PCI I/O space mapping.

    PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
    PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
    space such that 0xFA000000 in the processor's address space maps to 0
    on the PCI I/O bus.

    Signed-off-by Randy Vinson <rvinson@mvista.com>
    Acked-by: Roy Zang <tie-fei.zang@freescale.com>

commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Wed Aug 13 18:10:26 2008 +0200

    i.MX31: Specify maintainers for i.MX31-based boards

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Aug 26 15:01:28 2008 +0200

    ADS5121: adjust image addresses in RAM and flash

    Use the same mapping in flash as used by Linux

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 19f101412c16edee9fd55db4039e1d68a833b28b
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Aug 26 13:14:34 2008 +0200

    cmd_mem.c: Fix help message alignment

    Bug was introced by "Big white-space cleanup" (53677ef1)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Wed Aug 20 11:11:52 2008 +0200

    change mvBL-M7 default env and move to vendor subdir

    fix mvBL-M7 config and move to matrix_vision subdir

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
Author: Nick Spence <nick.spence@freescale.com>
Date:	Fri Aug 22 23:52:40 2008 -0700

    MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices

    This patch adds elements to the 83xx sysconf structure and #define values that are used
    by mpc83xx family devices.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Date:	Fri Aug 22 11:00:15 2008 -0700

    MPC8349EMDS: Add PCI Agent (PCISLAVE) support

    Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
    PCI card rather than a host computer.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 4ff9aea9d6b5602683a920951ef896996438af62
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Date:	Fri Aug 22 11:00:14 2008 -0700

    mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code

    This adds a helper function to unlock the PCI configuration bit, so that
    any extra PCI setup (such as outbound windows, etc.) can be done after
    using the 83XX_GENERIC_PCI code to set up the PCI bus.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 162338e1fcde231ca4d562e5ebd7859456731691
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Date:	Fri Aug 22 11:00:13 2008 -0700

    MPC8349EMDS: use 83XX_GENERIC_PCI setup code

    Change the MPC8349EMDS board to use the generic PCI initialization code
    for the mpc83xx cpu.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Mon Aug 25 14:53:09 2008 -0500

    fix out of tree building

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit a49d10cf027d059ee15c262010a05cdaec0961e1
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Aug 25 23:45:41 2008 +0200

    Minor coding style cleanup, updte CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
Author: Stefan Roese <sr@denx.de>
Date:	Wed Aug 20 20:29:38 2008 +0200

    RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)

    This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
    to combine both config options into one line. This even allows defining
    both options and not generating the target object twice.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 079edb913dbae147b50a488cf02e03f473fc5f28
Author: Jens Gehrlein <sew_s@tqs.de>
Date:	Fri Jul 4 16:50:05 2008 +0200

    MX31: fix bit masks in function mx31_decode_pll()

    Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.

    Signed-off-by: Jens Gehrlein <sew_s@tqs.de>

commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Mon Aug 25 11:11:34 2008 +0200

    Correct ARM Versatile Timer Initialization

     - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
       -- Timer Value Register @ TIMER Base + 4 is Read-only.
       -- Prescale Value (Bits 3-2 of TIMER Control register)
	can only be one of 00,01,10. 11 is undefined.
       -- CFG_HZ for Versatile board is set to
	#define CFG_HZ		(1000000 / 256)
	So Prescale bits is set to indicate
	- 8 Stages of Prescale, Clock divided by 256
     - The Timer Control Register has one Undefined/Shouldn't Use Bit
       So we should do read/modify/write Operation

    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Mon Aug 25 11:30:29 2008 +0200

    Add ARM AMBA PL031 RTC Support

    Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>

commit e39411674669cc880e1ec4a8ca4794fb15c33a45
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Tue Aug 19 16:21:03 2008 -0400

    ARM DaVinci: Removed redundant NAND initialization code.

    ARM DaVinci: Removed redundant NAND initialization code.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit b3fb663b20d995ca41327db877ddb168279b3f62
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Tue Aug 19 16:21:00 2008 -0400

    ARM DaVinci: Fix compilation error with new MTD code.

    ARM DaVinci: Fix compilation error with new MTD code.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Fri Aug 22 14:37:05 2008 -0400

    Add note on dereferencing /aliases pointers

    Replace the "must quote special characters" note with a hint on
    how to dereference /aliases pointers by omitting the leading "/".
    This feature was introduced by Kumar Gala as a libfdt enhancement
    in commit ed035708235332c3c117ee3bb1a426063f03cfcb.

    Example:

    => fdt print /aliases
    aliases {
	    ethernet0 = "/qe@e0100000/ucc@2000";
	    ethernet1 = "/qe@e0100000/ucc@3000";
	    serial0 = "/soc8360@e0000000/serial@4500";
	    serial1 = "/soc8360@e0000000/serial@4600";
	    pci0 = "/pci@e0008500";
    };
    => fdt print ethernet0
    ucc@2000 {
	    device_type = "network";
	    compatible = "ucc_geth";
	    cell-index = <0x1>;
	    reg = <0x2000 0x200>;
	    interrupts = <0x20>;
	    interrupt-parent = <0x2>;
	    local-mac-address = [00 00 00 00 00 00];
	    rx-clock-name = "none";
	    tx-clock-name = "clk9";
	    phy-handle = <0x3>;
	    phy-connection-type = "rgmii-id";
	    pio-handle = <0x4>;
    };

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit feeca3f578b7f53c032ba203698751c982f8bf5a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Aug 14 08:28:19 2008 -0500

    libfdt: Add support for using aliases in fdt_path_offset()

    If the path doesn't start with '/' check to see if it matches some alias
    under "/aliases" and substitute the matching alias value in the path
    and retry the lookup.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: David Gibson <david@gibson.dropbear.id.au>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Wed Aug 6 14:50:49 2008 +1000

    libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()

    As well as fdt_subnode_offset(), libfdt includes an
    fdt_subnode_offset_namelen() function that takes the subnode name to
    look up not as a NUL-terminated string, but as a string with an
    explicit length.  This can be useful when the caller has the name as
    part of a longer string, such as a full path.

    However, we don't have corresponding 'namelen' versions for
    fdt_get_property() and fdt_getprop().  There are less obvious use
    cases for these variants on property names, but there are
    circumstances where they can be useful e.g. looking up property names
    which need to be parsed from a longer string buffer such as user input
    or a configuration file, or looking up an alias in a path with
    IEEE1275 style aliases.

    So, since it's very easy to implement such variants, this patch does
    so.  The original NUL-terminated variants are, of course, implemented
    in terms of the namelen versions.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit f171746f701ea58bf6a53e835b53d2aaebee0d81
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Tue Jul 29 14:51:22 2008 +1000

    libfdt: Forgot one function when cleaning the namespace

    In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
    libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
    chance of collisions with things from whatever package libfdt is
    embedded in, pulled into the libfdt build via that environment's
    libfdt_env.h.

    Except... I missed one.  This patch applies the same treatment to
    _stringlist_contains().  While we're at it, also make it static since
    it's only used in the same file.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 46390da15411351fc3b498bd8c1615f78fe80df0
Author: Wolfram Sang <w.sang@pengutronix.de>
Date:	Wed Jul 9 11:22:44 2008 +0200

    libfdt: Improve documentation in libfdt.h

    Fix a few typos and mistakes.

    Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
    Acked-by: David Gibson <david@gibson.dropbear.id.au>

commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Wed Jul 9 14:10:24 2008 +1000

    libfdt: Increase namespace-pollution paranoia

    libfdt is supposed to easy to embed in projects all and sundry.
    Often, it won't be practical to separate the embedded libfdt's
    namespace from that of the surrounding project.  Which means there can
    be namespace conflicts between even libfdt's internal/static functions
    and functions or macros coming from the surrounding project's headers
    via libfdt_env.h.

    This patch, therefore, renames a bunch of libfdt internal functions
    and macros and makes a few other chances to reduce the chances of
    namespace collisions with embedding projects.  Specifically:
	- Internal functions (even static ones) are now named _fdt_*()

	- The type and (static) global for the error table in
	      fdt_strerror() gain an fdt_ prefix

	- The unused macro PALIGN is removed

	- The memeq and streq macros are removed and open-coded in the
	      users (they were only used once each)

	- Other macros gain an FDT_ prefix

	- To save some of the bulk from the previous change, an
	      FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
	      FDT_ALIGN(x, FDT_TAGSIZE)

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit c66830263af19831f2b7db307f79d1943febf7f9
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Mon Jul 7 10:14:15 2008 +1000

    dtc: Enable and fix -Wcast-qual warnings

    Enabling -Wcast-qual warnings in dtc shows up a number of places where
    we are incorrectly discarding a const qualification.  There are also
    some places where we are intentionally discarding the 'const', and we
    need an ugly cast through uintptr_t to suppress the warning.  However,
    most of these are pretty well isolated with the *_w() functions.  So
    in the interests of maximum safety with const qualifications, this
    patch enables the warnings and fixes the existing complaints.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Mon Jul 7 10:10:48 2008 +1000

    dtc: Enable and fix -Wpointer-arith warnings

    This patch turns on the -Wpointer-arith option in the dtc Makefile,
    and fixes the resulting warnings due to using (void *) in pointer
    arithmetic.  While convenient, pointer arithmetic on void * is not
    portable, so it's better that we avoid it, particularly in libfdt.

    Also add necessary definition of uintptr_t needed by David Gibson's
    changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
    comes from stdint.h, which u-boot doesn't have). -- gvb

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
Author: Tirumala R Marri <tmarri@amcc.com>
Date:	Thu Aug 21 21:54:53 2008 -0700

    ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix

    During recent PCI-E tests it has been found that current
    driverl level and de-emphasis values are not set correctly.
    After sweeping throgh all de-ephasis values, it was found that
    0x130 is a right value. Where 0x13 is driver level and 0 is
    de-emphasis.

    Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Aug 20 20:46:56 2008 +0200

    Make the YAFFS filesystem work

    Recently the YAFFS filesystem support has been added to U-boot.
    However, just enabling CONFIG_YAFFS2 is not enough to get it working.

    ymount will generate an exception (when dereferencing mtd->readoob()), because
    the genericDevice is a null pointer. Further, a lot of logging is produced
    while using YAFFS fs, so logging should also be disabled.
    Both issues are solved by this patch.

    With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
    in U-boot, as well as in Linux.

    Tested on a Atmel AT91SAM9261EK board.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Acked-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Tue Aug 19 08:42:53 2008 +0900

    Fix OneNAND read_oob/write_oob functions compatability

    Also sync with kernel OneNAND codes

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 8d765456c1d33f2010d2717ee58de7647fdc6346
Author: Scott Wood <scottwood@freescale.com>
Date:	Mon Aug 18 17:11:20 2008 -0500

    NAND: Remove delay from nand_boot_fsl_elbc.c.

    It was for debugging purposes, and shouldn't have been left in.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit f556483734126793522fb7a8cf36af90da78f084
Author: Stefan Roese <sr@denx.de>
Date:	Thu Aug 21 11:05:03 2008 +0200

    ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch

    This patch fixes some minor issues introduced with the patch:
    ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:

    - Rework memory-queue and PLB arbiter optimization code, that the
      local variable is not needed anymore. This removes one #ifdef.
    - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
      of XXX+ 0x01). This was not introduced by Prodyut, just a
      copy-paste problem.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 079589bcfb24ba11068460276a3cc9549ab5346f
Author: Prodyut  Hazarika <phazarika@amcc.com>
Date:	Wed Aug 20 09:38:51 2008 -0700

    ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
	PPC405EX and PPC460EX/GT/SX

    - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
      processors
    - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
      across processors (405 and 440/460)
    - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
      processors
    - Add register bit definitions for Memory Queue Configuration registers

    Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ba37aa03287c5483c61c0a3e320c8888bee0143a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Aug 19 15:41:18 2008 -0500

    fdt: rework fdt_fixup_ethernet() to use env instead of bd_t

    Move to using the environment variables 'ethaddr', 'eth1addr', etc..
    instead of bd->bi_enetaddr, bi_enet1addr, etc.

    This makes the code a bit more flexible to the number of ethernet
    interfaces.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 4cacf7c64609839f809e2f9c45873f1d65861703
Author: Stefan Roese <sr@denx.de>
Date:	Tue Aug 19 14:57:55 2008 +0200

    hush: Fix printf debug macro in hush.c so that it usable in U-Boot

    This patch changes the debug_printf() marco for U-Boot in hush.c and
    moves the definition of DEBUG_SHELL to a place that is actually compiled
    under U-Boot.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Aug 19 09:57:41 2008 +0200

    cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

    Commit	00b1883a4cac59d97cd297b1a3a398db85982865
    missed a few boards:
	include/configs/M5253DEMO.h
	include/configs/ml507.h
	include/configs/redwood.h

    This patch fixes this.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 0768b7a872964085eece8d5e9fec9175e9deb161
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon Aug 18 13:41:27 2008 +0200

    Consolidate strmhz() implementation

    ARM, i386, m68k and ppc all have identical implementations of strmhz().
    Other architectures don't provide this function at all.

    This patch moves strmhz() into lib_generic, reducing code duplication
    and providing a more unified API across architectures.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit a928d0df211f1d829308d335d19be3ca42558dfc
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Mon Aug 18 12:02:51 2008 +0200

    fix mvbc_p board build warnings

    fix build warnings @ mvBC-P board by using correct types, i.e. change
    out_be32 to out_be16 and out_8 accordingly.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 16 18:54:27 2008 +0200

    Makefile: fix posix support on find

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit bef92e215d945cc574399c1a1b00a3a76d35aa03
Author: Axel Beierlein <belatronix@web.de>
Date:	Sat Aug 16 00:30:48 2008 +0200

    Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards

    Tested with TQM5200S on STK52XX.200 Board

    Signed-off-by: Axel Beierlein <belatronix@web.de>

commit 0800707b6d5041a840a65d556032c15c584b55f8
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Aug 15 14:36:32 2008 -0500

    mod_i2c_mem() bugfix

    The last used chip, address, and address length were not being
    stored for the imm and imn commands.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 4afbef967275b2f636abae86f91b81becee7ad03
Author: Steven A. Falco <sfalco@harris.com>
Date:	Fri Aug 15 15:37:31 2008 -0400

    Fix typo in spelling of ATAPI.

    Correct a small spelling mistake.

    Signed-off-by: Steven A. Falco <sfalco@harris.com>

commit 36c2d3062ecc6ab85f8e237180eb134464c48418
Author: Steven A. Falco <sfalco@harris.com>
Date:	Fri Aug 15 15:34:10 2008 -0400

    Add a hook to allow board-specific PIO mode setting.

    This patch adds a hook whereby a board-specific routine can be called to
    configure hardware for a PIO mode.	The prototype for the board-specific
    routine is:

	int inline ide_set_piomode(int pio_mode)

    ide_set_piomode should be prepared to configure hardware for a pio_mode
    between 0 and 6, inclusive.  It should return 0 on success or 1 on failure.

    Signed-off-by: Steven A. Falco <sfalco@harris.com>

commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
Author: Steven A. Falco <sfalco@harris.com>
Date:	Fri Aug 15 15:29:12 2008 -0400

    Replace enums in ata.h with an include of libata.h

    This patch removes some enums from ata.h and replaces them with an
    include of libata.h.  This way, we eliminate duplicated code, and
    prevent errors whereby the different versions could be out of sync.

    Signed-off-by: Steven A. Falco <sfalco@harris.com>

commit 0de0afbca865ecf482b4d2b635236746def8518f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 15 18:32:41 2008 +0200

    coldfire: fix CFI drivers activation with new macro

    rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:35 2008 -0500

    fdt: fdt addr w/o any args reports back the current working address

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f953d99fd528a496b400a706b511eaf8e3ea66af
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:34 2008 -0500

    fdt: added the ability to set initrd start/end via chosen command

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ffa4bafacaef67058463b3d7d0099ced57569dd2
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:33 2008 -0500

    Add command to enable/disable interrupts

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
Author: Nick Spence <nick.spence@freescale.com>
Date:	Tue Aug 19 22:21:16 2008 -0700

    CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()

    This patch fixes a missing vendor code in the flash_real_protect() function.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Aug 19 16:53:39 2008 +0000

    CFI: Fix AMD Legacy sector protect

    New implement sector lock and unlock or softlock commands
    do not exist in AMD legacy flash. Thus, causing issue
    when erasing AMD legacy flash (such as lv040)

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 492671404140f09d5b21b3d2ce4e362c0692c069
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Aug 20 09:40:16 2008 +0200

    hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER

    CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 33eac2b3d946fc998a09245dfe54d017079b9056
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Aug 20 09:28:36 2008 +0200

    hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 25da0b84195fdda89a943b2d25757db5afeef5b8
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Aug 20 09:27:37 2008 +0200

    favr-32-ezkit: Fix printf format warnings

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri Aug 15 12:04:25 2008 +0200

    MAINTAINERS: Sort avr32 section alphabetically

    The rest of the MAINTAINERS file appears to be sorted
    almost-alphabetically, but entries for the newly added AVR32 boards were
    added somewhat randomly. This patch sorts the list alphabetically again.

    Also update my e-mail address. The old one still works, but it may not
    work forever.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 13b50fe3bc065c48911fa373231421280855a9d6
Author: Mark Jackson <mpfj@mimc.co.uk>
Date:	Wed Jul 30 13:07:27 2008 +0100

    avr32: Add MIMC200 board

    The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
    8MByte FLASH and 128KByte FRAM.

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Jul 9 21:07:34 2008 +0900

    rtl8169: add support for RTL8110SCL

    This patch fixes a problem that RTL8110SCL started transfer
    with an incorrect memory address.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 25 15:48:52 2008 -0500

    Fix dm9000 receive status and len little endian issue

    The received status and len was in little endian
    format and caused the ethernet unable to proceed
    further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit fcd69a1a57fb2af4d26201422095a4be9f36963e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:32 2008 -0500

    Clean up usage of icache_disable/dcache_disable

    There is no point in disabling the icache on 7xx/74xx/86xx parts and not
    also flushing the icache.  All callers of invalidate_l1_instruction_cache()
    call icache_disable() right after.	Make it so icache_disable() calls
    invalidate_l1_instruction_cache() for us.

    Also, dcache_disable() already calls dcache_flush() so there is no point
    in the explicit calls of dcache_flush().

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Aug 15 08:24:31 2008 -0500

    Update linux bootm to support ePAPR client interface

    The ePAPR spec has some subtle differences from the current device
    tree based boot interface to the powerpc linux kernel. The powerpc
    linux kernel currently ignores the differences that ePAPR specifies.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b734e5556a239b3be5f9693b2f4b4b739683ec16
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Aug 18 23:50:20 2008 +0200

    Minor code cleanup: keep lists sorted.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d0039d4ed275e6ca09fb417895024ad02be118c4
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Wed Jul 23 19:10:14 2008 +0200

    Add support for ADT7460 I2C monitor chip

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jul 14 19:45:45 2008 +0200

    video: Clean drivers/video/Makefile

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 871c18dd301752270e1f74328c846c3104be1e2e
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jul 14 19:45:37 2008 +0200

    rtc: Clean drivers/rtc/Makefile

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
Author: Michal Simek <monstr@monstr.eu>
Date:	Mon Jul 14 19:45:35 2008 +0200

    i2c: Clean drivers/i2c/ Makefile

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
Author: Harald Welte <laforge@openmoko.org>
Date:	Wed Jul 9 22:30:30 2008 +0800

    Add 'license' command to U-Boot command line

    The 'license' command includes the U-Boot license (GPLv2) into the
    actual bootloader binary. The license text can be shown interactively
    at the U-Boot commandline.

    For products where the commandline can actually be accessed by the
    end user, this helps to prevent inadvertent GPL violations, since the
    GPLv2 license text can no longer be 'forgotten' to be included into
    the product.

    The 'license' command can be enabled by CONFIG_CMD_LICENSE.

    Signed-off-by: Harald Welte <laforge@openmoko.org>

commit fe2ce5500ebf43d79d227190bd2370232d5b113d
Author: Harald Welte <laforge@gnumonks.org>
Date:	Sun Jul 6 15:56:38 2008 +0800

    add 'unzip' command to u-boot commandline

    [PATCH] add new 'unzip' command to u-boot commandline

    common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
    memory to memory, and option CONFIG_CMD_UNZIP to enable it

    Signed-off-by: Werner Almesberger <werner@openmoko.org>
    Signed-off-by: Harald Welte <laforge@openmoko.org>

commit 07efc9e321619c3dec213310c32e011aa6f02783
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Aug 6 19:37:17 2008 -0500

    Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase

    The CFG_ENV_SIZE is not suitable used for SPI flash erase
    sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
    Add condition check if CFG_ENV_SIZE is larger than
    CFG_ENV_SECT_SIZE, calculate the right number of sectors for
    erasing.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Aug 11 15:54:25 2008 +0000

    ColdFire: Multiple fixes for M5282EVB

    Incorrect CFG_HZ value, change 1000000 to 1000.
    Rename #waring to #warning. RAMBAR1 uses twice
    in start.S, rename the later to FLASHBAR. Insert
    nop for DRAM setup. And, env_offset in linker file.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Aug 11 15:26:43 2008 +0000

    ColdFire: Move m5282evb from board to board/freescale

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Aug 11 15:25:07 2008 +0000

    ColdFire: Move m5272c3 from board to board/freescale

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 659e9bad629a480f606b286d5703aef7159edf98
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Aug 11 15:23:16 2008 +0000

    ColdFire: Move m5271evb from board to board/freescale

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 05316f8ece8206339a208ec052f039cd0f7ca922
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Aug 11 13:41:49 2008 +0000

    ColdFire: Add M54451EVB platform support for MCF5445x

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Aug 6 19:14:08 2008 -0500

    ColdFire: Add Serial Flash support for M54455EVB

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 9f751551456828b2d0ff417f10959fb0c7110bd0
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 23 20:38:53 2008 -0500

    ColdFire: Implement SBF feature for M5445EVB

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit a7323bba229203aae2604afde131ab47bad4eadc
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 23 17:53:36 2008 -0500

    ColdFire: Add SSPI feature for MCF5445x

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit b2d022d1ac3f59bffa9cec249341e77aea168abc
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 23 17:37:10 2008 -0500

    ColdFire: Use CFI Flash driver for M54455EVB

    Remove non-common flash driver in
    board/freescale/m54455evb/flash.c. The non-cfi flash will
    use CONFIG_FLASH_CFI_LEGACY to configure the flash
    attribute.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 23 17:11:47 2008 -0500

    ColdFire: Add M5253DEMO platform support for MCF5253

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 80ba61fd82569af40e04d4a089257b81881884f2
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Aug 6 14:17:09 2008 -0500

    ColdFire: Raise M5253EVBE uart baudrate to 115200 bps

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit d361307e73ce1f6fc68760123f37d4876f851f3e
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Aug 6 14:11:36 2008 -0500

    ColdFire: Fix M5253EVB dram bring up issue

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 4b0708093e15b412296328bf81325cf9b69fe512
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Aug 14 14:41:06 2008 +0200

    Coding Style cleanup, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Aug 13 18:24:05 2008 -0500

    socrates: Update NAND driver to new API.

    Also, fix some minor formatting issues, and simplify the handling of
    "state" for writes.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit ba22d10f39eaeedd035e8265616e31ff88e314d5
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Aug 13 18:03:40 2008 -0500

    quad100hd: Update NAND driver to new API.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Aug 13 17:53:48 2008 -0500

    m5373evb: Update NAND driver to new API.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 1a23a197c8722b805f40895544bbdb1a648c1c82
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Aug 13 17:04:30 2008 -0500

    s3c24x0: Update NAND driver to new API.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Aug 13 15:56:00 2008 -0500

    at91: Update board NAND drivers to current API.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Wed Aug 13 09:11:02 2008 +0900

    Fix OneNAND build break

    Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
    - fix bufferram management at erase operation
    This patch includes the NAND/OneNAND state filed too.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 9483df6408c25f16060432de3868901e352e23bc
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:43 2008 +0200

    drivers/mtd/nand_legacy: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:43 2008 +0200

    drivers/mtd/nand: Move conditional compilation to Makefile

    rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:42 2008 +0200

    drivers/mtd/onenand: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 00b1883a4cac59d97cd297b1a3a398db85982865
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:42 2008 +0200

    drivers/mtd: Move conditional compilation to Makefile

    rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:41 2008 +0200

    drivers/qe: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:40 2008 +0200

    drivers/pci: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:40 2008 +0200

    drivers/misc: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:40 2008 +0200

    drivers/input: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 88f57e093114a44aa9a858d52b099bcc52034a8c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:39 2008 +0200

    drivers/dma: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:39 2008 +0200

    drivers/block: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:39 2008 +0200

    serial: move CFG_NS9750_UART to CONFIG_NS9750_UART

    move also conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:38 2008 +0200

    serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE

    move also conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d6e9ee92e890f67594ab150689510df361133ead
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:38 2008 +0200

    common: Move conditional compilation to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Aug 13 01:40:09 2008 +0200

    mx31: move freescale's mx31 boards to vendor board dir

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jul 5 23:11:11 2008 +0200

    at91: move arch-at91sam9 to arch-at91

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 195ccfc5991d48764b2519941e3507f693851d5d
Author: Fathi BOUDRA <fabo@debian.org>
Date:	Wed Aug 6 10:06:20 2008 +0200

    OneNAND: Fill in MTD function pointers for OneNAND.

    onenand_print_device_info():
     - Now returns a string to be placed in mtd->name,
       rather than calling printf.
     - Remove verbose parameter as it becomes useless.

    Signed-off-by: Fathi Boudra <fabo@debian.org>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit aa646643b6bc250cb3a4966bf728876e0c10d329
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Wed Aug 6 21:42:07 2008 +0200

    nand_spl: Support page-aligned read in nand_load, use chipselect

    Supporting page-aligned reads doesn't incure any sinificant overhead, just
    a small change in the algorithm. Also replace in_8 with readb, since there
    is no in_8 on ARM.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Aug 5 11:15:59 2008 -0500

    NAND boot: Update large page support for current API.

    Also, remove the ctrl variable in favor of passing the constants
    directly, and remove redundant (u8) casts.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit e4c09508545d1c45617ba45391c03c03cbc360b9
Author: Scott Wood <scottwood@freescale.com>
Date:	Mon Jun 30 14:13:28 2008 -0500

    NAND boot: MPC8313ERDB support

    Note that with older board revisions, NAND boot may only work after a
    power-on reset, and not after a warm reset.  I don't have a newer board
    to test on; if you have a board with a 33MHz crystal, please let me know
    if it works after a warm reset.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
Author: Scott Wood <scottwood@freescale.com>
Date:	Thu Jun 26 14:06:52 2008 -0500

    mpc8313erdb: Enable NAND in config.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Jul 31 12:38:26 2008 +0200

    NAND: Do not write or read a whole block if it is larger than the environment

    Environment can be smaller than NAND block size, do not need to read a whole
    block and minimum for writing is one page. Also remove an unused variable.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit eafcabd15f00c142156235c519fcc55b10993241
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Sun Jun 22 16:30:06 2008 +0200

    NAND: chip->state does not always get set.

    Fixes an issue with chip->state not always being set causing troubles.

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
Author: Ilya Yanok <yanok@emcraft.com>
Date:	Mon Jun 30 15:34:40 2008 +0200

    NAND: Scan bad blocks lazily.

    Rather than scanning on boot, scan upon the first attempt to check the
    badness of a block.  This speeds up boot when not using NAND, and reduces
    the likelihood of needing to reflash via JTAG if NAND becomes
    nonfunctional.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit dfbf617ff055e4216f78d358b0867c548916d14b
Author: Scott Wood <scottwood@freescale.com>
Date:	Thu Jun 12 13:20:16 2008 -0500

    NAND read/write fix

    Implement block-skipping read/write, based on a patch from
    Morten Ebbell Hestens <morten.hestnes@tandberg.com>.

    Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
Author: Scott Wood <scottwood@freescale.com>
Date:	Thu Jun 12 13:13:23 2008 -0500

    NAND: Always skip blocks on read/write/boot.

    Use of the non-skipping versions was almost always (if not always)
    an error, and no valid use case has been identified.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit e1c3dbada349992875934575c97b328ab2cb33ca
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Jun 12 11:10:21 2008 -0500

    nand: fsl_upm: convert to updated MTD NAND infrastructure

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 300253306acc72b1b2e9faf0987f86551151d7cf
Author: Scott Wood <scottwood@freescale.com>
Date:	Thu May 22 15:02:46 2008 -0500

    fsl_elbc_nand: Hard-code the FBAR/FPAR split.

    The hardware has separate registers for block and page-within-block,
    but the division between the two has no apparent relation to the
    actual erase block size of the NAND chip.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Fri Mar 28 22:10:54 2008 +0300

    fsl_elbc_nand: workaround for hangs during nand write

    Using current driver elbc sometimes hangs during nand write. Reading back
    last byte helps though (thanks to Scott Wood for the idea).

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
Author: Scott Wood <scottwood@freescale.com>
Date:	Fri Mar 21 16:12:51 2008 -0500

    Freescale eLBC FCM NAND driver

    This is a driver for the Flash Control Machine of the enhanched Local Bus
    Controller found on some Freescale chips (such as the mpc8313 and the
    mpc8379).

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
Author: Scott Wood <scottwood@freescale.com>
Date:	Tue Mar 18 15:29:14 2008 -0500

    Don't panic if a controller driver does ecc its own way.

    Some hardware, such as the enhanced local bus controller used on some
    mpc83xx chips, does ecc transparently when reading and writing data, rather
    than providing a generic calculate/correct mechanism that can be exported to
    the nand subsystem.

    The subsystem should not BUG() when calculate, correct, or hwctl are
    missing, if the methods that call them have been overridden.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit e52b34d40a8a646e3d11638ea8797e96398dba13
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 10 18:47:33 2008 +0100

    NAND: Make NAND driver less verbose per default

    This patch turns off printing of bad blocks per default upon bootup.
    This can always be shown via the "nand bad" command later.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit fe56a2772e5c59577df906163d0d4b29b056140e
Author: Sergey Kubushyn <ksi@koi8.net>
Date:	Wed Jan 9 15:36:20 2008 +0100

    NAND: Davinci driver updates

    Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
    don't have hardware handy so I can not test it at the moment but changes are
    rather trivial so it should work. It would be nice if somebody with a
    hardware checked it anyways.

    Signed-off-by: Sergey Kubushyn <ksi@koi8.net>

commit deac913effd8d80535c9ff4687b6fcdff540c554
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 5 16:50:32 2008 +0100

    NAND: Fix compilation warning and small coding style issue

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c568f77acdf896fc3dd6413ce53205b17ba809a3
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 5 16:49:37 2008 +0100

    NAND: Update nand_spl driver to match updated nand subsystem

    This patch changes the NAND booting driver nand_spl/nand_boot.c to match
    the new infrastructure from the updated NAND subsystem. This NAND
    subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
    subsystem.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 5 16:47:58 2008 +0100

    NAND: Update 4xx NDFC driver to match updated nand subsystem

    This patch changes the 4xx NAND driver ndfc.c to match the new
    infrastructure from the updated NAND subsystem. This NAND
    subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
    subsystem.

    Tested successfully on AMCC Sequoia and Bamboo.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 12072264528eba33737bc9674e19f0e925ffda23
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 5 16:43:25 2008 +0100

    NAND: Change nand_wait_ready() to not call nand_wait()

    This patch changes nand_wait_ready() to not just call nand_wait(),
    since this will send a new command to the NAND chip. We just want to
    wait for the chip to become ready here.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9ad754fef5053144daed3b007adaf1c9bec654c9
Author: William Juul <william.juul@datarespons.no>
Date:	Fri Dec 14 16:33:45 2007 +0100

    make nand dump and nand dump.oob work

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
Author: William Juul <william.juul@datarespons.no>
Date:	Mon Nov 19 14:46:00 2007 +0100

    moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks

    Signed-off-by: William Juul <william.juul@tandberg.com>

commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
Author: William Juul <william.juul@tandberg.com>
Date:	Tue Jun 10 16:18:13 2008 -0500

    Clean out unneeded files

    Signed-off-by: William Juul <william.juul@tandberg.com>

commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
Author: William Juul <william.juul@datarespons.no>
Date:	Fri Nov 16 08:44:27 2007 +0100

    Create symlinks from yaffs2/direct to yaffs2

    Signed-off-by: William Juul <william.juul@tandberg.com>

commit 90ef117b68387d66763291af0117677644166611
Author: William Juul <william.juul@datarespons.no>
Date:	Thu Nov 15 12:23:57 2007 +0100

    Incorporate yaffs2 into U-boot

    To use YAFFS2 define CONFIG_YAFFS2

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
Author: William Juul <william.juul@datarespons.no>
Date:	Thu Nov 15 11:13:05 2007 +0100

    YAFFS2 import

    Direct import of yaffs as a tarball as of 20071113 from their public
    CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/

    The code can also be imported on the command line with:
    export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
    (Hit return when asked for a password)
    cvs checkout yaffs2

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>

commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
Author: William Juul <william.juul@datarespons.no>
Date:	Wed Nov 14 14:28:11 2007 +0100

    Whitespace cleanup and marking broken code.

    Changes requested by maintainer Stefan Roese after
    posting patch to U-boot mailing list.

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
Author: William Juul <william.juul@datarespons.no>
Date:	Fri Nov 9 13:32:30 2007 +0100

    Fixing coding style issues

     - Fixing leading white spaces
     - Fixing indentation where 4 spaces are used instead of tab
     - Removing C++ comments (//), wherever I introduced them

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 4cbb651b29cb64d378a06729970e1e153bb605b1
Author: William Juul <william.juul@datarespons.no>
Date:	Thu Nov 8 10:39:53 2007 +0100

    Remove white space at end.

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
Author: William Juul <william.juul@datarespons.no>
Date:	Wed Oct 31 13:53:06 2007 +0100

    Update MTD to that of Linux 2.6.22.1

    A lot changed in the Linux MTD code, since it was last ported from
    Linux to U-Boot. This patch takes U-Boot NAND support to the level
    of Linux 2.6.22.1 and will enable support for very large NAND devices
    (4KB pages) and ease the compatibility between U-Boot and Linux
    filesystems.

    This patch is tested on two custom boards with PPC and ARM
    processors running YAFFS in U-Boot and Linux using gcc-4.1.2
    cross compilers.

    MAKEALL ppc/arm has some issues:
     * DOC/OneNand/nand_spl is not building (I have not tried porting
       these parts, and since I do not have any HW and I am not familiar
       with this code/HW I think its best left to someone else.)

    Except for the issues mentioned above, I have ported all drivers
    necessary to run MAKEALL ppc/arm without errors and warnings. Many
    drivers were trivial to port, but some were not so trivial. The
    following drivers must be examined carefully and maybe rewritten to
    some degree:
     cpu/ppc4xx/ndfc.c
     cpu/arm926ejs/davinci/nand.c
     board/delta/nand.c
     board/zylonite/nand.c

    Signed-off-by: William Juul <william.juul@tandberg.com>
    Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit cd82919e6c8a73b363a26f34b734923844e52d1c
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Aug 12 16:08:38 2008 +0200

    Coding style cleanup, update CHANGELOG, prepare release

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 17e900b8c0f38d922da47073246219dce2a847f2
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Aug 12 14:54:04 2008 +0200

    MVBC_P: fix compile problem

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 52b047ae48219b59bebe37ba743ab103fd4f8316
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Aug 12 12:10:11 2008 +0200

    MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c9c101c660b3d1995045c61c7c6041f52b6cf335
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Aug 12 00:36:53 2008 +0200

    ads5121: fix compiler warnings (unused variables)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 902ca09246039964d59bbcb519b1e1b5aed01308
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Aug 11 11:29:28 2008 -0500

    85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS

    Use CONFIG_NUM_CPUS to match existing define used by 86xx.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Aug 11 09:20:53 2008 -0500

    Fix fallout from autostart revert

    The autostart revert caused a bit of duplicated code as well as
    code that was using images->autostart that needs to get removed so
    we can build again.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Aug 11 09:16:25 2008 -0500

    Fix compile error related to r8a66597-hcd & usb

    When building the 8544DS board we get this error:

    In file included from r8a66597-hcd.c:22:
    u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
    make[1]: *** [r8a66597-hcd.o] Error 1

    The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
    is set.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2d0daa03612338a813e3c9d22680e54eabfea378
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Aug 4 14:02:26 2008 -0500

    POWERPC 86xx: Move BAT setup code to C

    This is needed because we will be possibly be locating
    devices at physical addresses above 32bits, and the asm
    preprocessing does not appear to deal with ULL constants
    properly. We now call write_bat in lib_ppc/bat_rw.c.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 9de67149db576c91b9c2a0a182652331e7e44211
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Aug 4 14:01:53 2008 -0500

    POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c

    Perform sync/isync as required by the architecture.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Aug 4 14:01:16 2008 -0500

    POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Sun Aug 3 21:44:10 2008 +0200

    i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.

    Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
    contacts instead of only the first 256 ones as is the case prior to
    this patch.

    Add missing MUX_* macros and update board files to use the new macros.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Sun Aug 3 21:43:37 2008 +0200

    i.MX31: Fix IOMUX related typos

    Correct the names of some IOMUX macros.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
Author: Steve Sakoman <steve@sakoman.com>
Date:	Mon Aug 11 20:26:16 2008 +0200

    OneNAND: Remove unused parameters to onenand_verify_page

    The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.

    Signed-off-by: Steve Sakoman <steve@sakoman.com>
    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>

commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Aug 8 18:00:40 2008 +0200

    video: fix bug in cfb_console code

    FILL_15BIT_555RGB macro extension for pixel swapping
    by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
    introduced a bug in cfb_console:

    Bitmaps with odd-numbered width won't be rendered
    correctly and even U-Boot crashes are observed on
    some platforms while repeated rendering of such
    bitmaps with "bmp display". Also if a bitmap is
    rendered to an odd-numbered x starting position,
    the same problem occurs. This patch is an attempt
    to fix it.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit d9015f6a50d7258125349ef5c2af836458a0029a
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Aug 8 18:00:39 2008 +0200

    video: fix bug in logo_plot

    If logo_plot() should ever be called with x starting
    position other than zero and for pixel depths greater
    than 8bpp, logo colors distortion will be observed.
    This patch fixes the issue.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 406819ae94f79f5b59e01d163380ca7d83709251
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Aug 11 00:17:52 2008 +0200

    MAINTAINERS: sort entries

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:	Thu Aug 7 18:19:28 2008 +0800

    Add mpc7448hpc2 maintainer information

    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Thu Aug 7 13:13:27 2008 +0530

    common/cmd_load.c - Minor code & Coding Style cleanup

    - os_data_header Variable is a carry over feature
       & unused. So removed all instance of this variable
     - Minor Code Style Update

    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Wed Aug 6 19:32:33 2008 +0200

    Update the U-Boot wiki URL.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
Date:	Sun Aug 10 17:56:36 2008 +0200

    OneNAND: Remove base address offset usage

    While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
    using OneNAND and some using NAND, we found some differences in OneNAND and
    NAND command address handling.

    As this might confuse users (it already confused us), we like to align OneNAND
    and NAND address handling.

    The issue is that cmd_onenand.c subtracts the onenand base address from the
    addresses you type into the u-boot command line so, unlike nand, you can't
    use addresses relative to the start of the onenand part e.g. this won't work:

    onenand read 82000000 280000 400000

    you have to use:

    onenand read 82000000 20280000 400000

    Looking at recent git, the only board currently using OneNAND is Apollon, and
    for this the OneNAND base address is 0 (apollon.h)

    #define	CFG_ONENAND_BASE	0x00000000

    so patch below won't break any existing boards and will align OneNAND and NAND
    handling on boards where OneNAND base address is != 0.

    Signed-off-by: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>

commit c11528083ef6e55e76df742228c26e39d151813d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Aug 7 09:28:20 2008 -0500

    mpc85xx: workaround old binutils bug

    The recent change to move the .bss outside of the image gives older
    binutils (ld from eldk4.1/binutils-2.16) some headache:

    ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
    ppc_85xx-ld: final link failed: Bad value

    We workaround it by being explicit about the program headers and not
    assigning the .bss to a program header.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0bf202ec586d4466c900e987720fa635c594d689
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Aug 10 01:26:26 2008 +0200

    Revert "[new uImage] Add autostart flag to bootm_headers structure"

    This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.

    The commit was based on a misunderstanding of the (documented)
    meaning of the 'autostart' environment variable. It might cause
    boards to hang if 'autostart' was used, with the potential to brick
    them. Go back to the documented behaviour.

    Conflicts:

	common/cmd_bootm.c
	common/image.c
	include/image.h

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Aug 9 23:17:32 2008 +0200

    TQM8xx{L,M}: try to normalize config files for TQM8xx? based board

    - enable CFI driver where this was forgotten
    - enable mtdparts support
    - adjust default environment
    etc.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 41266c9b5a5f873df3ec891bb0907616958b5602
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Aug 5 10:51:57 2008 -0500

    FIT: Fix handling of images without ramdisks

    boot_get_ramdisk() should not treat the case when a FIT image does
    not contain a ramdisk as an error.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Michal Simek <monstr@monstr.eu>

commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
Author: Sergey Lapin <slapin@ossfans.org>
Date:	Sat Aug 9 01:39:09 2008 +0400

    DataFlash: AT45DB021 fix and AT45DB081 support

    Fix for page size of AT45DB021. Also adding bigger AT45DB081
    which comes with some newer boards.

    Signed-off-by: Sergey Lapin <slapin@ossfans.org>

commit ba9324451b662dd393afa53e5cc36fc5d3d10966
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Aug 8 16:30:23 2008 +0900

    sh: Update sh7763rdp config

    Add sh_eth support to sh7763rdp.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

commit 21f971ec265f6042ec21636d55d06a6bc0751077
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 7 01:22:29 2008 +0200

    TQM823L: re-enable logo support; update LCD_INFO text

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Aug 8 16:41:56 2008 +0200

    TQM8xxL: fix support for second flash bank

    When switching the TQM8xxL modules to use the CFI flash driver,
    support for the second flash bank was broken because the CFI driver
    did not support dynamically sized banks. This gets fixed now.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2a112b234d879f6390503a5f4e38246acce9d0b0
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Aug 8 16:39:54 2008 +0200

    CFI: allow for dynamically determined flash sizes and addresses

    The CFI driver allowed only for static initializers in the
    CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
    several flash banks contiguously if the bank sizes were not known in
    advance, which kind of violates U-Boot's design philosophy.

    (will be used for example by the TQM8xxL boards)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Thu Aug 7 23:26:35 2008 -0700

    QE UEC: Fix compiler warnings

    Moved static functions earlier in file so forward declarations are not needed.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d5d28fe4aad5f4535400647a5617c11039506467
Author: David Saada <David.Saada@ecitele.com>
Date:	Mon Mar 31 02:37:38 2008 -0700

    QE UEC: Add MII Commands

    Add MII commands to the UEC driver. Note that once a UEC device is selected,
    any device on its MDIO bus can be addressed.

    Signed-off-by: David Saada <david.saada@ecitele.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date:	Wed Jul 9 21:07:38 2008 +0900

    usb: add support for R8A66597 usb controller

    add support for Renesas R8A66597 usb controller.
    This patch supports USB Host mode.

    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 1d10dcd041aaeae9fd7c821005692898a0303382
Author: Hunter, Jon <jon-hunter@ti.com>
Date:	Sat Jul 26 18:59:16 2008 -0500

    Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c

    Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.

    Signed-off-by: Jon Hunter <jon-hunter@ti.com>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit eab1007334b93a6209f1ec33615e26ef5311ede7
Author: Steven A. Falco <sfalco@harris.com>
Date:	Wed Aug 6 15:42:52 2008 -0400

    ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.

    The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
    configuration to match the schematic, and also sets the SDR0_PFC1 register to
    select the corresponding mode for the UARTs.

    Signed-off-by: Steven A. Falco <sfalco@harris.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date:	Wed Aug 6 14:42:13 2008 +0200

    avr32: add support for EarthLCD Favr-32 board

    This patch adds support for the Favr-32 board made by EarthLCD.

    This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
    has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
    Ethernet, audio out, USB device, SD-card slot, USART and various other
    connectors for cennecting stuff to SPI, I2C, GPIO, etc.

    Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit bc9019e19758a19a388fb20ef18dc771cd39fdda
Author: Rafael Campos <rafael.campos@hanscan.com>
Date:	Thu Jul 31 10:22:20 2008 +0200

    cfi-flash: Added support to flash_real_protect for Atmel flash devices

    Some of the flash memories produced by ATMEL start in read-only mode.
    We need to unprotect it. This patch allows the AT49BV6416 to work with
    cfi_flash memories. Tested in the at91rm9200ek board.

    Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Tue Aug 5 15:36:39 2008 +0200

    cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
Author: Stefan Roese <sr@denx.de>
Date:	Wed Aug 6 14:06:03 2008 +0200

    Fix merge problems

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f2302d4430e7f3f48308d6a585320fe96af8afbd
Author: Stefan Roese <sr@denx.de>
Date:	Wed Aug 6 14:05:38 2008 +0200

    Fix merge problems

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
Author: Kenneth Johansson <kenneth@southpole.se>
Date:	Tue Jul 15 12:13:38 2008 +0200

    mpc5121: Move iopin features from board specific to common files.

    And in the process eliminate some duplicate register defines.

    Signed-off-by: Kenneth Johansson <kenneth@southpole.se>

commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
Author: John Rigby <jrigby@freescale.com>
Date:	Tue Aug 5 17:38:57 2008 -0600

    mpc5121: squash some fdt fixup errors

    On ADS5121 when booting linux the following errors are seen:
	Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
	Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
	Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND

    This is caused by ft_cpu_setup trying to deal with
    both old and new soc node naming.  This patch
    fixes this by being smarter about what to
    fixup.

    Also do soc node fixups by compatible instead of by path.
    A new board config called OF_SOC_COMPAT defined
    to be "fsl,mpc5121-immr" replaces the old
    OF_SOC node path that was defined to be "soc@80000000".

    Old device trees still work, but the compatiblity
    is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
    which is on by default in include/configs/ads5121.h.

    Signed-off-by: John Rigby <jrigby@freescale.com>

commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 2 23:48:30 2008 +0200

    drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 2 23:48:32 2008 +0200

    nios2/sysid: fix printf warning

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 2 23:48:33 2008 +0200

    Fix remaining build issues with MPC8xx FADS boards.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 2 23:48:31 2008 +0200

    nios2: fix phys_addr_t and phys_size_t support

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Aug 2 23:48:34 2008 +0200

    mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
Author: Mark Jackson <mpfj@mimc.co.uk>
Date:	Fri Aug 1 09:48:29 2008 +0100

    Fix bitmap display for atmel lcd controller

    The current lcd_display_bitmap() function does not work properly
    for the Atmel LCD controller.

    2 fixes need to be done:-

    (a) when setting the colour map, use the lcd_setcolreg() function
	as provided by the Atmel driver
    (b) the data is never actually written to the lcd framebuffer !!

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

commit 2a433c66b1e2770349fe4911be23c375f053ebd8
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Aug 1 08:40:34 2008 +0200

    qemu_mips: update README to follow qemu update about default machine

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ac169d645f5f0e0b9a232563099209e92a355d8e
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Jul 31 19:53:21 2008 -0500

    ColdFire: Fix compilation issue caused by a missing function

    Implement usec2ticks() which is used by fsl_i2c.c in
    lib_m68k/time.c

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Jul 31 19:53:06 2008 -0500

    Fix compilation error for TASREG

    TASREG is ColdFire platform, the include ppc4xx.h in
    board/esd/common/flash.c causes conflict.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Jul 31 19:52:36 2008 -0500

    Fix compilation error for MCF5275

    Rename OBJ to COBJ in board/platform/Makefile

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 5c40548f01218360a1f1395198c50ff45f3035b5
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Jul 31 19:52:28 2008 -0500

    Fix compile error caused by incorrect function return type

    Rename int mii_init(void) to void mii_init(void) for idmr
    ColdFire platform

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit a58c78067c928976c082c758d3987e89ead5b191
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Aug 1 12:06:22 2008 +0200

    Fix build issues with MPC8xx FADS boards.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 31 17:54:03 2008 +0200

    Prepare v1.3.4-rc2: update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
Author: Mark Jackson <mpfj@mimc.co.uk>
Date:	Thu Jul 31 16:09:00 2008 +0100

    Add gzipped logo support

    The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:

      If this option is set, additionally to standard BMP
      images, gzipped BMP images can be displayed via the
      splashscreen support or the bmp command.

    However, the splashscreen function *only* supports standard BMP images.

    This patch adds the documented gzip support.

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
Author: Mark Jackson <mpfj@mimc.co.uk>
Date:	Thu Jul 31 15:56:48 2008 +0100

    Fix Atmel LCD controller endianess for AVR32 processors

    The Atmel lcd controller is used on Atmel's AT91 (little endian) and
    AVR32 (big endian) platforms.

    As such, the controller can handle both big and little endian memory.

    This patch fixes the driver for the AVR32 platform.

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Jul 31 15:56:01 2008 +0200

    apollon: fix build out of tree

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 2e752be39d3e398d4ab89ffa6634c397df298297
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Jul 31 12:35:04 2008 +0200

    Uncompressed images loaded to their start address shall set load_end too

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Acked-by: Bartlomiej Sieka <tur@semihalf.com>

commit c37207d7f51e19c17f859966f314e27cc1231801
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jul 16 16:38:59 2008 +0200

    Fix printf() format problems with configurable prompts

    U-Boot allows for configurable prompt strings using the
    CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
    the assumption was that any such user defined problts would contain
    exactly one "%d" format specifier. But some boards did not.

    To allow for flexible boot prompts without adding too complex code we
    now allow to specify the whole list of printf() arguments in the user
    definition. This is powerful, but requires a responsible user who
    really understands what he is doing, as he needs to know for exanple
    which variables are available in the respective context.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 54754120637b6a7f4ff774fb199fc550bcfea1da
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 31 17:02:14 2008 +0200

    TQM85xx: fix typo introduce by commit ffbb5cb9

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 31 15:27:01 2008 +0200

    mvbc_p board: fix most build warnings.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c4ec6db074051d2f6fc76a66411c60621b22bc02
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 31 13:57:20 2008 +0200

    E1000: clean up CONFIG_E1000_FALLBACK_MAC handling

    Avoid "integer constant is too large for 'long' type" warnings.
    And simplify the code.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9196b44334c330cc13de2464c59181e4db71f549
Author: Matvejchikov Ilya <matvejchikov@gmail.com>
Date:	Wed Jul 30 23:21:19 2008 +0400

    8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI

    Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
Author: Matvejchikov Ilya <matvejchikov@gmail.com>
Date:	Wed Jul 30 23:20:32 2008 +0400

    PPC: Add pci_clk in the global_data for CPM2 processors

    This patch adds pci_clk field to the global_data structure for the
    processors which have CPM2 module in case the CONFIG_PCI is defined.

    Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

commit f0ff885ca64655bee6540eb8a25eed90b1152686
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jul 30 14:13:30 2008 -0500

    mpc85xx: Update linker scripts for Freescale boards

    * Move to using absolute addressing always.  Makes the scripts a bit more
      portable and common
    * Moved .bss after the end of the image.  These allows us to have more
      room in the resulting binary image for code and data.
    * Removed .text object files that aren't really needed
    * Make sure _end is 4-byte aligned as the .bss init code expects this.
      (Its possible that the end of .bss isn't 4-byte aligned)

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jul 30 08:01:15 2008 -0500

    Fix compile warnings in dlmalloc

    The origional code was using on odd reference to get to the first
    real element in av_[].  The first two elements of the array are
    not used for actual bins, but for house keeping.  If we are more
    explicit about how use the first few elements we can get rid of the
    warnings:

    dlmalloc.c: In function 'malloc_extend_top':
    dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
    dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
    dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
    ...

    The logic of how this code came to be is:
	bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ

    SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
	bin_at(0) = &(av_[0])

    Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jul 30 10:21:01 2008 +0200

    ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jul 30 09:59:51 2008 +0200

    cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'

    A recent patch used '#if (CONFIG_CMD_USB)' instead of
    '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
    common/bootm.c compile again.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Tue Jul 22 08:01:43 2008 +0900

    Remove unused I2C at apollon board

    There are no I2C devices on this board.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 3c95960e526b3b026da20201db64526f46faf14b
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 31 10:12:09 2008 +0200

    at91rm9200dk, csb637: fix NAND related build problems

    Tried fixing NAND support for the at91rm9200dk board; untested.
    Disabled NAND support in the csb637 board config file.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Wed Jul 30 12:39:28 2008 +0200

    ppc4xx: ML507: Environment in flash and MTD Support

    - Relocate the location of U-Boot in the flash
    - Save the environment in one sector of the flash memory
    - MTD Support

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Tue Jul 29 17:16:10 2008 +0200

    ppc4xx: ML507: Use of get_ram_size in board ml507

    - Change suggested by WD

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Mon Jul 21 20:30:07 2008 +0200

    ppc4xx: ML507: U-Boot in flash and System ACE

    This patch allows booting from FLASH the ML507 board by Xilinx.
    Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
Author: Julien May <mailinglist@miromico.ch>
Date:	Mon Jun 23 13:57:52 2008 +0200

    Add support for the hammerhead (AVR32) board

    The Hammerhead platform is built around a AVR32 32-bit microcontroller
    from Atmel.  It offers versatile peripherals, such as ethernet, usb
    device, usb host etc.

    The board also incooperates a power supply and is a Power over Ethernet
    (PoE) Powered Device (PD).

    Additonally, a Cyclone III FPGA from Altera is integrated on the board.
    The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
    DDR2 SDRAM interfaces, which will cover even the most exceptional need
    of memory bandwidth. Together with the onboard video decoder the board
    is ready for video processing.

    For more information see: http:///www.miromico.com/hammerhead

    Signed-off-by: Julien May <mailinglist@miromico.ch>
    [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Jul 29 12:23:49 2008 -0500

    fsl_i2c: Use timebase timer functions instead of get_timer()

    The current implementation of get_timer() is only really useful after we
    have relocated u-boot to memory.  The i2c code is used before that as part
    of the SPD DDR setup.

    We actually have a bug when using the get_timer() code before relocation
    because the .bss hasn't been setup and thus we could be reading/writing
    a random location (probably in flash).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
Date:	Tue Jul 29 14:49:31 2008 +0200

    Adder8xx: Fix CFG_MONITOR_LEN

    Due to increased space usage, U-Boot can no longer be stored in three sectors.
    The current U-Boot use just over three flash sectors (197k), and U-Boot will
    become corrupt after saving environment variables. This patch adds another 64k
    to CFG_MONITOR_LEN.

    Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>

commit a4c59ad4a21140550ada6f97690d2527c4146ce5
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Tue Jul 29 08:47:57 2008 +0900

    Add OneNAND IPL related files to gitignore

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 8d87589e8e874df7120a3d9667f051bc33bac250
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Mon Jul 28 20:38:25 2008 +0200

    API: Teach the storage layer about SATA and MMC options.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Acked-by: Rafal Jaworowski <raj@semihalf.com>

commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Mon Jul 28 20:37:48 2008 +0200

    API: Dump contents of sector 0 in the demo application.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Acked-by: Rafal Jaworowski <raj@semihalf.com>

commit 13ca6305f2eba49c175f6370c35286141059c789
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Mon Jul 28 20:37:10 2008 +0200

    API: Correct storage enumeration routine, other minor fixes in API storage area.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
    Acked-by: Rafal Jaworowski <raj@semihalf.com>

commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Mon Jul 28 20:36:19 2008 +0200

    API: Fix compilation warnings in api_examples/demo.c.

    Signed-off-by: Rafal Czubak <rcz@semihalf.com>

commit c14eefcc48212af2f3314809605698dd8393a90a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Jul 27 17:09:43 2008 +0200

    Fix more printf() format warnings

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 936897d4d1365452bbbdf8430db5e7769ef08d38
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri Jul 25 15:18:16 2008 +0200

    Fix remaining CFG_CMD_ define, ifdef and comments

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 5d1d00fb36005482e1803a00ddc46efa11d719af
Author: Stefano Babic <sbabic@denx.de>
Date:	Fri Jul 25 08:57:40 2008 +0200

    Add include for config.h in command.h.

    Because the cmd_tbl_s structure depends on the configuration file, it
    must be assured that config.h is included before the structure is
    evaluated by the compiler. If this is not certain, it could happen
    that the compiler generates structures of different size, depending
    on the fact if the source file includes <config.h> before or after
    <command.h>.

    The effect is that u-boot crashes when tries to relocate the command
    table (for ppc) or try to access to the command table for other
    architectures.

    The problem can happen on board-depending commands. All general
    commands under /common are unaffected, because they include already
    config.h before command.h.

    Signed-off-by: Stefano Babic <sbabic@denx.de>

commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Jul 23 13:16:06 2008 -0500

    NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.

    This fixes building out-of-tree.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
Author: Heiko Schocher <hs@denx.de>
Date:	Wed Jul 23 07:30:46 2008 +0200

    Fix warnings if compiling with IDE support.

    cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
    cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 7610db17fd4d59c51d825488526d85ede2f06767
Author: Adrian Filipi <adrian.filipi@eurotech.com>
Date:	Tue Jul 22 14:28:11 2008 -0400

    Removed support for the adsvix board.

    Support for the adsvix was originally provided by Applied Data
    Systems (ADS), inc., now EuroTech, Inc.
    The board never shipped aside from some sample boards.

    Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>

commit f96b44cef897bd372beb86dde1b33637c119d84d
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jul 22 16:22:11 2008 +0200

    ARM: set GD_FLG_RELOC for boards skipping relocation to RAM

    If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
    never set, because relocation to RAM is actually never done by U-boot
    itself. However, several pieces of code check if this flag is set at
    some time.

    So, to make sure this flag is set on boards skipping relocation, this
    is added to the initialisation of U-boot at a moment where it is safe
    to do so.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
Author: Timur Tabi <timur@freescale.com>
Date:	Mon Jul 21 14:26:23 2008 -0500

    fsl-i2c: fix writes to data segment before relocation

    Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
    relocation.  Commit d8c82db4 added the ability for i2c_init() to program the
    I2C bus speed and save the value in i2c_bus_speed[], which is a global
    variable.  It is an error to write to the data segment before relocation,
    which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
Author: Wolfgang Ocker <weo@reccoware.de>
Date:	Mon Jul 28 16:56:51 2008 +0200

    mips: Fix baudrate divisor computation on alchemy cpus

    Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
    on alchemy cpus.

    Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sat Jul 5 00:08:48 2008 -0700

    Moved initialization of AVR32 Ethernet controllers to board_eth_init()

    Renamed initialization functions for atngw100 and atstk1000.
    Removed initializations for these boards from net/eth.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Jul 23 10:55:46 2008 +0200

    spi flash: Fix printf() format warnings

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Jul 23 10:55:31 2008 +0200

    atmel_mci: Fix printf() format warnings

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Jul 23 10:55:15 2008 +0200

    avr32: Fix printf() format warnings

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Jul 23 10:52:19 2008 +0200

    avr32: asm/io.h needs asm/types.h

    map_physmem() takes a phys_addr_t as parameter. This type is defined in
    asm/types.h, so we need to include that file.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
Author: Michal Simek <monstr@monstr.eu>
Date:	Thu Jul 17 12:25:46 2008 +0200

    microblaze: Fix printf() format issues

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Thu Jul 17 07:27:51 2008 +0530

    Remove unused code from lib_arm/bootm.c

    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
Author: Detlev Zundel <dzu@denx.de>
Date:	Wed Jul 16 18:56:45 2008 +0200

    tqm85xx: Demystify 'DK: !!!' comment

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit b2f44ba570f3a01113bbb745daf46f3858d22f53
Author: Detlev Zundel <dzu@denx.de>
Date:	Wed Jul 16 18:56:44 2008 +0200

    83xx/85xx/86xx: Add LTEDR local bus definitions

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Wed Jul 16 16:22:32 2008 +0200

    serial_xuartlite.c: fix compiler warnings

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>

commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 18 11:03:35 2008 +0200

    POST: Add disable interrupts in some of the missing CPU POST tests

    Some CPU POST tests did not disable the interrupts while running. This
    seems to be necessary to protect this self modifying code.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 97a3bf268d096e0e97e54048448c35114edcf557
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 18 10:43:24 2008 +0200

    ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL

    This is needed for boards that define CFG_64BIT_STRTOUL but don't define
    CFG_64BIT_LBA.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0043ac55024963295fc79b39af85b6dc3b261e17
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Fri Jul 18 11:22:23 2008 +0200

    POST PPC4xx/spr IVPR only if PPC440

    The SPR IVPR register is only present (as far as I know) for
    processors with a PPC440 core.

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 18 10:42:29 2008 +0200

    ppc4xx: Enable 64bit printf format on 440/460 platforms

    This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
    440/460 platforms. This may be needed since those platforms support
    36bit physical address space.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 18 15:57:23 2008 +0200

    ppc4xx: Fix incorrect MODTx setup for some DIMM configurations

    This patch fixes a problem with incorrect MODTx (On Die Termination)
    setup for a configuration with multiple DIMM's and multiple ranks.
    Without this change Katmai was unable to boot Linux with DDR2 frequency
    >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
    with DDR2 frequency = 640MHz and mem=4GB.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 18 12:24:41 2008 +0200

    ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Thu Jul 17 12:47:09 2008 +0200

    ppc4xx: ML507 Board Support

    The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
	among others:
	-Virtex 5 FX FPGA (With a ppc440x5 in it)
	-256MB of SDRAM2
	-32MB of Flash
	-I2C Eeprom
	-System ACE chip
	-Serial ATA connectors
	-RS232 Level Conversors
	-Ethernet Transceiver

    This patch gives support to a standard design produced by EDK for this
    board: ppc440, uartlite, xilinx_int and flash

    - Includes Changes propossed by Stefan Roese and Michal Simek

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Acked-by: Stefan Roese <sr@denx.de>

commit d865fd09809a3a18669f35f970781820af40e4de
Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Date:	Thu Jul 17 11:44:12 2008 +0200

    ppc4xx: CPU PPC440x5 on Virtex5 FX

    -This patchs gives support for the embbedded ppc440
     on the Virtex5 FPGAs
    -interrupts.c divided in uic.c and interrupts.c
    -xilinx_irq.c for xilinx interrupt controller
    -Include modifications propossed by  Stefan Roese

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
    Acked-by: Stefan Roese <sr@denx.de>

commit 340ccb260f21516be360745d5c5e3bd0657698df
Author: Sebastian Siewior <bigeasy@linutronix.de>
Date:	Wed Jul 16 20:04:49 2008 +0200

    cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA

    This got broken by commits 93c56f212c
     [cfi_flash: support of long cmd in U-boot.]

    That command needs to be in little endian format on BE machines
    with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
    gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
    the cmdbuf in case portwidth = chipwidth = 8bit.

    Cc: Alexey Korolev <akorolev@infradead.org>
    Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
    Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>

commit 11188d55bc16dd907451c00282e00a038f73dd62
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 17 10:40:51 2008 +0200

    ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 021f6df6e96af5b387810cf96d24848da1faa55c
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Jul 10 17:20:51 2008 +0400

    83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup

    The thinko was quite silly indeed, I messed with !ptr. Normally this
    would trigger some fault, but in U-Boot NULL pointer is equal to phys
    0, so the code was working still, just didn't actually test mpc8315erdb
    environment variable value. Heh.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Tue Jul 8 21:00:04 2008 +0400

    83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs

    Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
    support, or without TSEC1 but with USB ULPI PHY support in addition.
    With this patch user can specify desired USB PHY.

    Also, it seems that we can't distinguish the two boards in software, so
    user have to set `mpc8315erdb' environment variable to either 'tsec1'
    (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
    Linux will not probe for TSEC1.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Tue Jul 8 20:59:43 2008 +0400

    fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups

    Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
    MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
    (connected to the four-ports hub, usb host only).

    This patch implements support for passing Dual-Role USB controller's
    device tree property phy_type through the usb_phy_type environment
    variable.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 699f05125509249072a0b865c8d35520d97cd501
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Jul 15 22:22:44 2008 +0200

    Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit bcab74baa6b1b1c969038ab6f64a186239180405
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Tue Jul 15 11:23:02 2008 -0400

    Round the serial port clock divisor value returned by calc_divisor()

    Round the serial port clock divisor value returned by
    calc_divisor()

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit 0328ef0edfe950f0b7b8b368dae482531506b74a
Author: Robin Getz <rgetz@blackfin.uclinux.org>
Date:	Tue Jul 15 21:44:46 2008 +0200

    Fix DHCP protocol so U-Boot does not respond too early
    on the network with it's offered IP number; it should not reply until
    after it has received a DHCP ACK message. Also ensures that U-Boot
    does it's DHCPREQUEST as broadcast (per RFC 2131).

    Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
Author: Sebastian Siewior <bigeasy@linutronix.de>
Date:	Tue Jul 15 13:35:23 2008 +0200

    cfi_flash: make the command u32 only

    This got changed by commit 93c56f212c
    [cfi_flash: support of long cmd in U-boot.]

    Long is the wrong type because it will behave differently on 64bit
    machines in a way that is probably not expected. u32 should be
    enough.

    Cc: Alexey Korolev <akorolev@infradead.org>
    Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
    Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>

commit 31cfe57491b183acae575d486729e158f016c27b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Jul 14 23:48:41 2008 +0200

    tools/gitignore: update to all generated files

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Wed Jul 9 18:30:44 2008 +0200

    mpc5xxx: Add MVBC_P board support

    The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
    controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit e2d31fb3450653115452144363d5bde4e5e3e693
Author: Timur Tabi <timur@freescale.com>
Date:	Thu Jun 19 17:56:11 2008 -0500

    Update Freescale sys_eeprom.c to handle CCID formats

    Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats.  The
    NXID format replaces the older CCID format, but it's important to support both
    since most boards out there still use the CCID format.  This change is in
    preparation for using one file to handle both formats.  This will also unify
    EEPROM support for all Freescale 85xx and 86xx boards.

    Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
    instead of ID_EEPROM_ADDR.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Jul 11 17:22:43 2008 +0900

    pci: sh: Add pci_skip_dev and pci_print_dev function

    Add function of new PCI, pci_skip_dev and pci_print_dev.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 1107014e835ec9d46c0333f4211d104f77442db0
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jul 14 20:29:07 2008 -0500

    Clean up INIT_RAM options

    The L2_INIT_RAM option was unused, and recent changes to the TLB code
    meant that the INIT_RAM TLBs weren't being cleared out.  In order to reduce
    the amount of mapped space attached to nothing, we change things so the TLBs
    get cleared.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 4524561820a9327e89107854b3a7187800ccf719
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jul 14 20:26:57 2008 -0500

    Remove fake flash bank from 8544 DS

    The fake flash bank was generating errors for anyone who didn't have a
    PromJET hooked up to the board.  As that constitutes the vast majority of
    users, we remove it.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jul 14 14:07:03 2008 -0500

    MPC8544DS: Add ATI Video card support

    Add support for using a PCIe ATI Video card on PCIe2.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jul 14 14:07:02 2008 -0500

    85xx: Add some L1/L2 SPR register definitions

    Add new L1/L2 SPRs related to e500mc cache config and control.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e5852787f0c3c442a276262f13d91ca450605ac0
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jul 14 14:07:01 2008 -0500

    MPC8544DS: Report board id, board version and fpga version.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 73f15a060f67a2462551c334215bd20fac6b81d1
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jul 14 14:07:00 2008 -0500

    85xx: Cleanup L2 cache size detection

    The L2 size detection code was a bit confusing and we kept having to add
    code to it to handle new processors.  Change the sense of detection so we
    look for the older processors that aren't changing.

    Also added support for 1M cache size on 8572.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c3ca7e5e00a24451f20df3bded9a61ba541921df
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Fri Jul 11 15:33:08 2008 -0400

    sbc8560: enable CONFIG_OF_LIBFDT by default

    Make the default build for the sbc8560 board be powerpc
    capable with libfdt support.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jul 14 20:04:40 2008 -0500

    Fix indentation for default boot environment variables

    This was proposed by Paul Gortmaker in response to Wolfgang's comments on
    similar #defines in sbc8560.h.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Fri Jul 11 15:33:07 2008 -0400

    sbc8560: add default fdt values

    Add in the default fdt settings and the typical EXTRA_ENV
    settings as borrowed from the mpc8560ads.  Fix a couple
    of stale references to the mpc8560ads dating back to the
    original clone/fork.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit d04e76edf92f7f89696989e8702b97e020455af3
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Fri Jul 11 15:33:06 2008 -0400

    sbc8560: add in ft_board_setup()

    Add in for the sbc8560, the ft_board_setup() routine, based on what is
    in use for the Freescale MPC8560ADS board.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit c158bcaca3b31cbe38c4143812e6170e38a57393
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Fri Jul 11 15:33:05 2008 -0400

    sbc8560: define eth0 and eth1 instead of eth1 and eth2

    The existing config doesn't define CONFIG_HAS_ETH0, and so the
    fdt support doesn't update the zeros in the dtb local-mac with
    real data from the u-boot env.  Since the existing config is
    tailored to just two interfaces, get rid of the ETH2 definitions
    at the same time.

    Also don't include any end user specific data into the environment
    by default -- things like MAC address, network parameters etc. need
    to come from the end user.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Fri Jul 11 15:33:04 2008 -0400

    sbc8560: properly set cs0_bnds for 512MB

    The sbc8560 board ships with 512MB of memory installed,
    but the current cs0_bnds is hard coded for 256MB.  Set the
    value based on CFG_SDRAM_SIZE.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Fri Jul 11 15:33:03 2008 -0400

    sbc8560: proper definitions for TSEC.

    The definitions for the TSEC have become out of date.  There is no
    longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
    Update to match those of other boards, like the MPC8560ADS.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 71074abbe0c76429577aff58aeff0a24ad210b23
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Wed Jul 9 13:23:05 2008 -0400

    8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq

    Some boards that have external 16550 UARTs don't have a direct
    tie between bi_busfreq and the clock used for the UARTs.  Boards
    that do have such a tie should set CFG_NS16550_CLK to be
    get_bus_freq(0) -- which most of them do already.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>

commit 24ef76f320fbadf074105229826514db140f939f
Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Date:	Wed Jul 2 07:03:53 2008 -0700

    Change the temp map to ROM to align addresses to page size.

    With a page size of BOOKE_PAGESZ_16M, both the real and effective
    addresses must be multiples of 16MB.  The hardware silently truncates
    them so the code happens to work.  This patch clarifies the situation
    by establishing addresses that the hardware doesn't need to truncate.

    Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 06b4186c10204b6683edb047ac5f506fb0ce0937
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jun 17 17:45:22 2008 -0500

    mpc85xx: use IS_E_PROCESSOR macro

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Mon Jun 16 15:55:53 2008 -0500

    fdt: add crypto node handling for MPC8{3, 5}xxE processors

    Delete the crypto node if not on an E-processor.  If on 8360 or 834x family,
    check rev and up-rev crypto node (to SEC rev. 2.4 property values)
    if on an 'EA' processor, e.g. MPC8349EA.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Fri Jul 11 15:10:11 2008 -0400

    ARM DaVinci: Remove extern phy_t declaration by moving code to proper place

    ARM DaVinci: Remove extern phy_t declaration by moving
    code to proper place.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Fri Jul 11 15:10:10 2008 -0400

    ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()

    ARM DaVinci: Remove duplicate definitions of MACH_TYPE
    and prototype of i2c_init().

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jul 14 14:03:02 2008 -0500

    Fix some more printf() format problems.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 45b16d22c64674ccd8c4637456a987463609141c
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 22:38:42 2008 +0200

    Fix coding style; make code better parsable by external tools

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b880cbf207b1c109d3a661417a8feddcbd729a9d
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 21:19:08 2008 +0200

    cpu/i386/serial.c: Fix syntax errors

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 20:41:35 2008 +0200

    elppc board: Coding style cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 20:40:22 2008 +0200

    elppc board: fix syntax error.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 20:38:26 2008 +0200

    EB+MCF-EV123 board: fix coding style (alingment)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 6841785a0bb0f38175456a923edd634fb7dd6947
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 20:36:44 2008 +0200

    EB+MCF-EV123 board: fix syntx error

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jul 7 18:02:08 2008 -0500

    Remove LBC_CACHE_BASE from 8544 DS

    The 8544 DS doesn't have any cacheable Local Bus memories set up.  By mapping
    space for some anyway, we were allowing speculative loads into unmapped space,
    which would cause an exception (annoying, even if ultimately harmless).
    Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
    problem.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 15:19:07 2008 +0200

    Code cleanup: fix old style assignment ambiguities like "=-" etc.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d7854223c5c85b5849fbf422cc8ac0efef461c37
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 15:10:53 2008 +0200

    AmigaOneG3SE: remove dead and incomplete files

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b64f190b7a34224df09b559ca111eb1b733f00ad
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 14 15:06:35 2008 +0200

    Fix printf() format issues with sizeof_t types by using %zu

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f354b73e16a86f9e9085471a830605f74f84ea5d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Jul 14 14:11:45 2008 +0200

    vsprintf: add z and t options

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Jul 13 23:07:35 2008 +0200

    Fix some more printf() format issues.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d5996dd555edf52721b7691a4c59de016251ed39
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Jul 13 19:51:00 2008 +0200

    Fix some more printf() format problems.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0f9d5f6d6e814907794995c6a22af752040c35d9
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Jul 13 19:48:26 2008 +0200

    ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
Author: Anatolij Gustschin <agust@denx.de>
Date:	Sat Jul 12 17:31:36 2008 +0200

    Fix bug in Lime video driver

    We need to wait while drawing engine clears frame
    buffer before any further software accesses to frame
    buffer will be initiated. Otherwise software drawn
    parts could be partially destroyed by the drawing
    engine or even GDC chip freeze could occur (as
    observed on socrates board).

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jul 12 14:36:34 2008 +0200

    Fix some more printf() format issues.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 18c8a28aad49803780bd8d52432ded528e37e701
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Jul 11 15:11:57 2008 +0200

    hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Acked-by: Stefan Roese <sr@denx.de>

commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Jul 11 11:50:53 2008 +0200

    hwmon: Cleaning hwmon devices

    Clean Makefile
    Move device specific values to driver for better reading

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Acked-by: Stefan Roese <sr@denx.de>

commit c78fce699c7ff467ecd841da6a79f065180bf578
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Jul 11 10:43:13 2008 +0200

    FIS: repare incorrect return value with ramdisk handling

    Microblaze and PowerPC use boot_get_ramdisk for loading
    ramdisk to memory with checking return value.
    Return 0 means success. Return 1 means failed.
    Here is correspond part of code from bootm.c which check
    return code.

    ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
		&rd_data_start, &rd_data_end);
    if (ret)
	goto error;

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Jul 11 10:10:32 2008 +0200

    microblaze: Remove useless ancient headers

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 53ea981c3124b13c137c2d10e975b7c6672266e0
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Jul 11 10:10:31 2008 +0200

    microblaze: Clean uartlite driver

    Redesign uartlite driver to in_be32 and out_be32 macros
    Fix missing header in io.h

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>

commit dbf3dfb386a2d5d2381814e39985ab2e21894550
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Fri Jul 11 02:39:14 2008 +0200

    Enable passing of ATAGs required by latest Linux kernel.

commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Fri Jul 11 10:24:15 2008 -0400

    Fix integer overflow warning in calc_divisor()

    which happened when rounding the serial port clock divisor

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 6b760189d77f001684e3160b355c185ca3804961
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Fri Jul 11 01:09:59 2008 +0200

    Fix build time warnings in function mmc_decode_csd()

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit c15947d6ce0d59925c97fdfac692476af6e262d0
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Thu Jul 10 10:46:33 2008 -0400

    ARM: Fix for broken compilation when defining CONFIG_CMD_ELF

    caused by missing dcache status/enable/disable functions.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 13:53:31 2008 +0200

    ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards

    This patch removes some ft_board_setup() functions from some 4xx boards.
    This can be done since we now have a default weak implementation for this
    in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
    implementation like canyonlands need their own version.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Jul 13 14:58:16 2008 +0200

    Add last known maintainer for orphaned boards; reformat.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu Jul 10 13:16:04 2008 +0200

    Remove kharris@nexus-tech.net from MAINTAINERS

    Mail to kharris@nexus-tech.net bounces because the user doesn't exist
    anymore. You can't be a maintainer without a valid e-mail address, so
    move all boards that used to be maintained by Kyle Harris to the
    "orphaned" list.

    Currently, only PowerPC has a list of orphaned boards, so this patch
    creates one for ARM as well.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 17bd17071463b0cde391ac4a0863d600474b4ea1
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Jul 10 01:15:10 2008 +0200

    at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260

    On the at91sam9260ep development board there is an EEPROM
    connected to the TWI interface (PA23, PA24 Peripheral A
    multiplexing), so we cannot use these pins as ETX2, ETX3.
    This patch configures PA10, PA11 pins for ETX2, ETX3
    instead of PA23, PA24 pins.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>
    Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>

commit f889265753ddf4465d9d580827bb9289bfac55d6
Author: Kenneth Johansson <kenneth@southpole.se>
Date:	Sat Jul 12 13:18:34 2008 -0600

    fix DIU for small screens

    The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
    so it was not possible to set a slow pixel clock and thus prevented
    display on small screens.

    Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
    Acked-by: John Rigby <jrigby@freescale.com>

commit b60b8573875e650e4c69be667bfc88d3ed474a7c
Author: John Rigby <jrigby@freescale.com>
Date:	Fri Jul 11 14:44:09 2008 -0600

    ADS5121 cleanup compile warnings

    board/ads5121/iopin.c
	Replace bit fields in struct iopin_t with a single
	field and intialize it via plain old macros.
	This fixes the type pun warnings and makes the code
	more readable.

    board/ads5121/ads5121.c
	Add include iopin.h to ads5121.c for the iopin_initialize
	prototype.

	Add an extern void ads5121_diu_init(void)

    Signed-off-by: John Rigby <jrigby@freescale.com>

commit bde63587622c4b830a27d1ddf7265843de9e994f
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Jul 11 22:56:11 2008 +0200

    Fix some more printf() format issues.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Jul 11 22:55:31 2008 +0200

    Fixed some out-of-tree build issues

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 9 16:20:23 2008 -0500

    ColdFire: Fix FB CS not setup properly for Mcf5282

    Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
    CFG_CSn_RO is defined as 0, the chipselect will not
    be assigned.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 9 15:47:27 2008 -0500

    ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC

    Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
    clock module in cpu/<cf arch>/cpu_init.c

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit f94945b517f10e01927101679c62361e03d4e837
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 9 15:25:01 2008 -0500

    ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 9 15:21:44 2008 -0500

    Fix compile error caused by missing timer function

    Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit c37ea031175b807c54e6bad9b270e9bede6c0078
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jul 9 15:14:25 2008 -0500

    Fix compile error caused by incorrect function return type

    Rename int mii_init(void) to void mii_init(void)

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 18 19:27:23 2008 -0500

    ColdFire: Fix power up issue for MCF5235

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 18 19:19:07 2008 -0500

    ColdFire: Fix compiling error for MCF5275

    The compiling error was caused by missing a closed parentheses
    in speed.c

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 18 19:14:01 2008 -0500

    ColdFire: Fix timer issue for MCF5272

    The timer was assigned to wrong timer memory mapped which
    caused udelay() and timer() not working properly.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 18 19:12:13 2008 -0500

    ColdFire: Change invalid JMP to BRA caught by new v4e toolchain

    Signed-off-by: Kurt Mahan <kmahan@freescale.com>

commit 8371dc2066136be21e10b7b9293e469297d77298
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 18 19:05:23 2008 -0500

    ColdFire: Add -got=single param for new linux v4e toolchains

    Signed-off-by: Kurt Mahan <kmahan@freescale.com>

commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jun 18 13:21:19 2008 -0500

    ColdFire: Fix code flash configuration for M547x/M548x boards

    Signed-off-by: Kurt Mahan <kmahan@freescale.com>

commit 6e37091afc07fdcc15590093fd066b0cb7399f85
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Jun 24 12:12:16 2008 -0500

    ColdFire: Fix warning messages by passing correct data type in board.c

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 81cc32322acb1b3225ee45606ced48e2a14824dc
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu May 29 12:21:54 2008 -0500

    ColdFire: Fix UART baudrate formula

    The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
    can generate the wrong divisor due to integer division truncation.
    Round the calculated divisor value by adding 1/2 the baudrate
    before dividing by the baudrate.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit b578fb471444cbd7db1285701ba51343baaf73fb
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 11:38:26 2008 +0200

    ppc4xx: Fix include sequence in 4xx_pcie.c

    This patch now moves common.h to the top of the inlcude list. This
    is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
    the phys_size_t/phys_addr_t are defined to the correct size in this
    driver.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 11 13:10:56 2008 +0200

    ppc4xx: Fix compile warning in 44x_spd_ddr2.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 11 11:40:13 2008 +0200

    ppc4xx: Fix small korat merge problem

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1d0554736a0a1dd59718acda660871ce56b69e18
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jul 11 11:34:52 2008 +0200

    ppc4xx: Some Rewood cleanups (coding style, leading white spaces)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3a82113ed5934d498f25080441a8261fc9454b15
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 16:37:09 2008 +0200

    ppc4xx: Add 460SX UIC defines

    Only the really needed ones are added (cascading and EMAC/MAL).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 26173fc6f60521c2a8072f652f863617fc11ba9a
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 30 14:11:07 2008 +0200

    ppc4xx: Continue cleanup of ppc440.h

    This patch continues the ppc440.h cleanup by removing some of the unused
    defines.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d9056b7913ed6a228d2f33671d916efedee541dd
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 30 14:05:05 2008 +0200

    ppc4xx: Cleanup Katmai & Yucca PCIe register usage

    This patch cleans up the 440SPe PCIe register usage. Now only defines
    from the include/asm-ppc/4xx_pcie.h are used.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5de851403b01489b493fa83137ad990b8ce60d1c
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jun 26 17:36:39 2008 +0200

    ppc4xx: Rework 440GX UIC handling

    This patch reworks the 440GX interrupt handling so that the common 4xx
    code can be used. The 440GX is an exception to all other 4xx variants
    by having the cascading interrupt vectors not on UIC0 but on a special
    UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
    the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
    handling is simpler without any 440GX special cases.

    Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d1631fe1a05b063ccaf62ea892a8887b829847d1
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jun 26 13:40:57 2008 +0200

    ppc4xx: Consolidate PPC4xx UIC defines

    This 2nd patch now removes all UIC mask bit definition. They should be
    generated from the vectors by using the UIC_MASK() macro from now on.
    This way only the vectors need to get defined for new PPC's.

    Also only the really used interrupt vectors are now defined. This makes
    definitions for new PPC versions easier and less error prone.

    Another part of this patch is that the 4xx emac driver got a little
    cleanup, since now the usage of the interrupts is clearer.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jun 25 10:59:22 2008 +0200

    ppc4xx: Consolidate PPC4xx UIC defines

    This patch is the first step to consolidate the UIC related defines in the
    4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
    asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
    steps.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7ee2619c20ccecd57966d74d844e6329e141261c
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jun 24 17:18:50 2008 +0200

    ppc4xx: Consolidate PPC4xx EBC defines

    This patch removes all EBC related defines from the PPC4xx headers
    ppc405.h and ppc440.h and introduces a new header

    include/asm-ppc/ppc4xx-ebc.h

    with all those defines.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e321801bed5a6d896d298c00fd20046f039d5d66
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 13:52:44 2008 +0200

    ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards

    This patch removes some ft_board_setup() functions from some 4xx boards.
    This can be done since we now have a default weak implementation for this
    in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
    implementation like canyonlands need their own version.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 08250eb2edbd96514d049602d9e134110ac3185f
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 15:32:32 2008 +0200

    ppc4xx: Fix merge problems in 44x_spd_ddr2.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Tue Jul 8 08:35:00 2008 -0700

    ppc4xx: Add MII mode support to the EMAC RGMII Bridge

    This patch adds support for placing the RGMII bridge on the
    PPC405EX(r) into MII/GMII mode and allows a board-specific
    configuration to specify the bridge mode at compile-time.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Wed Jul 9 16:46:35 2008 -0700

    ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller

    This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
    controller registers (MODT and INITPLR) used by the
    PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
    peer values used for the INITPLR MR and EMR registers,
    respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).

    With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
    Kilauea are replaced by equivalent mnemonics to make it easier to
    compare and contrast other 405EX(r)-based boards (e.g. during board
    bring-up).

    Finally, unified the SDRAM controller register dump routine such that
    it can be used across all processor variants that utilize the IBM DDR2
    SDRAM controller core. It produces output of the form:

	PPC4xx IBM DDR2 Register Dump:
		...
		SDRAM_MB0CF[40] = 0x00006701
		...

    which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
    since it is not uncommon that the DCR values in header files get mixed
    up and it helps to validate, at a glance, they match what is printed
    in the user manual.

    Tested on:
      AMCC Kilauea/Haleakala:
      - NFS Linux Boot: PASSED
      - NAND Linux Boot: PASSED

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ad7382d828982e9c1bafc4313ef1b666f6145f58
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Wed Jul 9 16:31:59 2008 -0700

    ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics

    Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
    revision ID DCR based on 405EX, and add field mnemonics for bus error
    status and ECC error status registers.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Wed Jul 9 16:31:36 2008 -0700

    ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)

    This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5b457d00730d4aa0c6450d21a9104723e606fb98
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Wed Jul 9 11:55:46 2008 -0700

    PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)

    While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
    controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
    the 405EX(r), SDRAM_MCSTAT has a different DCR value.

    Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
    which causes SDRAM initialization to periodically fail since it can
    prematurely indicate SDRAM ready status.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
Author: Feng Kan <fkan@amcc.com>
Date:	Tue Jul 8 22:48:42 2008 -0700

    ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.

    Add AMCC Redwood reference board that uses the latest
    PPC 464 CPU processor combined with a rich mix of peripheral
    controllers. The board will support PCIe, mutiple Gig ethernet
    ports, advanced hardware RAID assistance and IEEE 1588.

    Signed-off-by: Feng Kan <fkan@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
Author: Feng Kan <fkan@amcc.com>
Date:	Tue Jul 8 22:48:07 2008 -0700

    ppc4xx: Add initial 460SX reference board (redwood) config file and defines.

    Signed-off-by: Feng Kan <fkan@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7d30793685efcada183891c78fc892e6c9ba50c7
Author: Feng Kan <fkan@amcc.com>
Date:	Tue Jul 8 22:47:31 2008 -0700

    ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.

    Signed-off-by: Feng Kan <fkan@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Jul 11 01:16:00 2008 +0200

    Fix some more print() format errors.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit fdd70d1921b87287d9a99d1be99bc35226c2b412
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Jul 10 20:57:54 2008 +0200

    MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
Author: Sergey Lapin <slapin@ossfans.org>
Date:	Thu Jun 5 11:06:29 2008 +0400

    DataFlash AT45DB021 support

    Some boards based on AT91SAM926X-EK use smaller DF chips to keep
    bootstrap, u-boot and its environment, using NAND or other external
    storage for kernel and rootfs. This patch adds support for
    small 1024x263 chip.

    Signed-off-by: Sergey Lapin <slapin@ossfans.org>

commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Thu Jul 10 14:00:15 2008 -0500

    silence misc printf formatting compiler warnings

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
Author: Markus Klotzbücher <mk@denx.de>
Date:	Thu Jul 10 14:47:09 2008 +0200

    USB: shutdown USB before booting

    This patch fixes a potentially serious issue related to USB which was
    discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
    ARM920T. Martin wrote:

      Turn off USB to prevent the host controller from writing to the
      SDRAM while Linux is booting. This could happen, because the HCCA
      (Host Controller Communication Area) lies within the SDRAM and the
      host controller writes continously to this area (as busmaster!), for
      example to increase the HccaFrameNumber variable, which happens
      every 1 ms.

    This is a slightly modified version of the patch in order to shutdown
    USB when booting on all architectures.

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
Author: Martha Marx <mmarx@silicontkx.com>
Date:	Thu May 29 14:23:25 2008 -0400

    Configuration changes for ADS5121 Rev 3

    ADS5121 Rev 3 board is now the default config

    config targets are now

    ads5121_config
	Rev 3 board with
	PCI
	M41T62 on board RTC
	512MB DRAM

    ads5121_rev2_config
	Rev 2 board with
	No PCI
	256MB DRAM

    Signed-off-by: Martha Marx <mmarx@silicontkx.com>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>
    Acked-by: John Rigby <jrigby@freescale.com>

commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
Author: Martha Marx <mmarx@silicontkx.com>
Date:	Thu May 29 15:37:21 2008 -0400

    Consolidate ADS5121 IO Pin configuration

    Consolidate ADS5121 IO Pin configuration to one file
    board/ads5121/iopin.c.

    Remove pin config from cpu/mpc512x/fec.c

    Signed-off-by: Martha Marx <mmarx@silicontkx.com>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>
    Acked-by: John Rigby <jrigby@freescale.com>

commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
Author: Christian Eggers <christian@p2400.wgnetz.xx>
Date:	Fri Jun 27 19:46:51 2008 +0200

    Fix "usb part" command

    Only print partition for selected device if user supplied the <dev>
    arg with the "usb part [dev]" command.

    Signed-off-by: Christian Eggers <ceggers@gmx.de>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit cc83b27217f7380041fea386ddb6d6d9b261617d
Author: Harald Welte <laforge@gnumonks.org>
Date:	Mon Jul 7 00:58:05 2008 +0800

    fix USB devices with multiple configurations

    This patch fixes bugs in usbdcore*.c related to the use of devices
    with multiple configurations.

    The original code made mistakes about the meaning of configuration value and
    configuration index, and the resulting off-by-one errors resulted in:

    * SET_CONFIGURATION always selected the first configuration, no matter what
      wValue is being passed.
    * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
      configuration (index 0).

    Signed-off-by: Harald Welte <laforge@openmoko.org>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit 06c53beae1a726e707971c555613f09b270a2461
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 10 13:16:09 2008 +0200

    Fix some more print() format errors.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
Author: Christian Eggers <christian@p2400.wgnetz.xx>
Date:	Fri Jun 27 19:46:51 2008 +0200

    Fix "usb part" command

    Only print partition for selected device if user supplied the <dev>
    arg with the "usb part [dev]" command.

    Signed-off-by: Christian Eggers <ceggers@gmx.de>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
Author: Harald Welte <laforge@gnumonks.org>
Date:	Mon Jul 7 00:58:05 2008 +0800

    fix USB devices with multiple configurations

    This patch fixes bugs in usbdcore*.c related to the use of devices
    with multiple configurations.

    The original code made mistakes about the meaning of configuration value and
    configuration index, and the resulting off-by-one errors resulted in:

    * SET_CONFIGURATION always selected the first configuration, no matter what
      wValue is being passed.
    * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
      configuration (index 0).

    Signed-off-by: Harald Welte <laforge@openmoko.org>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit e870690bdca154943ecadd5212d2d59c1b9d391b
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 10:10:54 2008 +0200

    MTD/NAND: Fix printf format warning in nand code

    This patch fixes NAND related printf format warning. Those warnings are
    now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
    [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
    really helpful.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 10:00:45 2008 +0200

    rtc: Fix printf format warning in m41t60.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jul 8 12:01:47 2008 +0200

    pci: Move PCI device configuration check into a separate weak function

    This patch moves the check, if a device should be skipped in PCI PNP
    configuration into the function pci_skip_dev(). This function is defined
    as weak so that it can be overwritten by a platform specific one if
    needed. The check if the device should get printed in the PCI summary upon
    bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
    pci_print_dev() which is also defined as weak too.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit b002144e1dc21374b1ef5281fe6b5d014af96650
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jul 10 09:58:06 2008 +0200

    ppc4xx: Fix printf format warnings now visible with the updated format check

    This patch fixes ppc4xx related printf format warning. Those warnings are
    now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
    [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
    really helpful.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jul 9 17:33:57 2008 +0200

    ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai

    Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
    To support such configurations, we "only" map the first 2GB via the TLB's. We
    need some free virtual address space for the remaining peripherals like, SoC
    devices, FLASH etc.

    Note that ECC is currently not supported on configurations with more than 2GB
    SDRAM. This is because we only map the first 2GB on such systems, and therefore
    the ECC parity byte of the remaining area can't be written.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cf1c2ed91df26903b956948f37f82de9e1158a89
Author: Larry Johnson <lrj@acm.org>
Date:	Sat Jun 14 17:02:49 2008 -0400

    ppc4xx: Remove implementation of testdram() from Korat board support

    Signed-off-by: Larry Johnson <lrj@acm.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
Author: Larry Johnson <lrj@acm.org>
Date:	Sat Jun 14 16:53:02 2008 -0400

    ppc4xx: Update and add FDT to Korat board support

    Signed-off-by: Larry Johnson <lrj@acm.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4188f0491886b3b486164e819c0a83fdb97efd7d
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 10 01:13:30 2008 +0200

    Minor coding style cleanup; update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 8915f1189c1d29d8be7f4de325702d90a8988219
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Wed Jul 9 17:50:45 2008 -0400

    e1000: add support for 82545GM 64bit PCI-X copper variant

    This PCI-X e1000 variant works by just adding in the correct
    PCI IDs in the appropriate places.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Jul 9 12:34:11 2008 +0000

    SPARC: Build error fix

    (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)

    This patch makes SPARC targets build again. It is caused by
    phys_addr_t and phys_size_t being defined in the wrong header
    file. include/lmb.h need those typedefs to build.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 11ccc33fa21acce108f6b4a6936e3271af904c64
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Wed Jul 9 08:17:15 2008 +0200

    Many spelling fixes in README.

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit dbab0691d2533560f7e91b92ae844046a9ad1df3
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Wed Jul 9 08:17:06 2008 +0200

    Minor spelling fix in comment.

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Tue Jul 8 14:54:58 2008 -0400

    Round the serial port clock divisor value returned by calc_divisor()

    Round the serial port clock divisor value returned by
    calc_divisor().

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Signed-off-by: John Roberts <john.roberts@pwav.com>

commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
Author: Scott Wood <scottwood@freescale.com>
Date:	Wed Jul 9 17:47:52 2008 -0500

    NAND: ifdef-protect most of nand.h when using legacy NAND.

    Some macros such as NAND_CTL_SETALE conflict between current and legacy
    NAND, being defined by the subsystem in the former case and the board
    config file in the latter.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Tue Jul 8 11:02:05 2008 -0400

    ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)

    ARM: Fix for incorrect version of patch applied when
    adding support for the Lyrtech SFF-SDR board.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>

commit 47042b363ee5022b8180c65d3f4558e7972c79cd
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Tue Jul 8 09:08:40 2008 +0900

    Remove useless print message at apollon

    Remove useless print message at apollon

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jul 7 14:24:39 2008 -0500

    Fix LMB type issues

    The LMB code now uses phys_addr_t and phys_size_t.	Also, there were a couple
    of casting problems in the bootm code that called the LMB functions.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jul 7 09:39:06 2008 -0500

    Fix compiler warnings

    gcc-4.3.x generates the following:

    bootm.c: In function 'do_bootm_linux':
    bootm.c:208: warning: cast from pointer to integer of different size
    bootm.c:215: warning: cast from pointer to integer of different size

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
Author: Harald Welte <laforge@gnumonks.org>
Date:	Mon Jul 7 15:40:39 2008 +0800

    Remove code duplication for setting the default environment

    common/env_common.c (default_env): new function that resets the environment to
		    the default value
    common/env_common.c (env_relocate): use default_env instead of own copy
    common/env_nand.c (env_relocate_spec): use default_env instead of own copy
    include/environment.h: added default_env prototype

    Signed-off-by: Werner Almesberger <werner@openmoko.org>
    Signed-off-by: Harald Welte <laforge@openmoko.org>

commit 99c2b434d37863df5dda5207a53760c6506fc2be
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Sun Jun 22 16:13:46 2008 +0200

    NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.

    The writeenv() and readenv() calls introduced by the recently added bad block
    management for environment variables were missing casts therefore producing
    compile time warnings.
    While at it fixing some typo in a comment and indentation.

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
Author: Scott Wood <scottwood@freescale.com>
Date:	Fri Jun 20 12:38:57 2008 -0500

    NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.

    This is particularly problematic now that non-NAND-specific code is
    including <nand.h>, and thus all debugging code is being compiled
    regardless of whether it was requested, as reported by Scott McNutt
    <smcnutt@psyent.com>.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu Jun 12 19:27:58 2008 +0200

    mmc: Move atmel_mci driver into drivers/mmc

    This makes it easier to use the driver on other platforms.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu Jun 12 19:27:57 2008 +0200

    avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver

    After we move the atmel_mci driver into drivers/mmc, we can't select
    it with CONFIG_MMC anymore. Introduce a new symbol specifically for
    this driver so that there's no ambiguity.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 5ce13051a48c62bda9723df3b4778c492fb47f36
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu Jun 12 19:27:56 2008 +0200

    Create drivers/mmc subdirectory

    In order to consolidate more of the various MMC drivers around the
    tree, we must first have a common place to put them.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
    Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b502611b51f02718c2d1117d4981dabceb5af6de
Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Date:	Sun Jul 6 12:30:09 2008 +0200

    Change env_get_char from a global function ptr to a function

    This avoids an early global data reference.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 27269417ade432189b234d9fbac98b54e37b978c
Author: Matvejchikov Ilya <matvejchikov@gmail.com>
Date:	Sun Jul 6 13:57:58 2008 +0400

    Some copy-n-paste fixes in printf usage

    Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

commit 0e6989b9faf1588e8723535539e88a0df3c71356
Author: Matvejchikov Ilya <matvejchikov@gmail.com>
Date:	Sun Jul 6 13:57:00 2008 +0400

    FDT memory and pci node fixes for MPC8260ADS

    Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Date:	Mon Jul 7 06:41:14 2008 -0700

    Fix printf errors.

    The compiler will help find mismatches between printf formats and
    arguments if you let it.  This patch adds the necessary attributes to
    declarations in include/common.h, then begins to correct the resulting
    compiler warnings.	Some of these were bugs, e.g., "$d" instead of
    "%d" and incorrect arguments.  Others were just annoying, like
    int-long mismatches on a system where both are 32 bits.  It's worth
    fixing the annoying errors to catch the real ones.

    Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>

commit 417faf285b2527acb2de24c5cd3e2621d385408c
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed Jul 9 11:09:41 2008 -0500

    Allow print_size to print in GB

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit e7c374529c87525c9aa463e0557c287887ae4e9e
Author: Jason McMullan <mcmullan@netapp.com>
Date:	Sun Jun 8 23:56:00 2008 -0400

    mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment

    Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
    they are set in the U-Boot environment.

    Signed-off-by: Jason McMullan <mcmullan@netapp.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 0192d7d56e9320819dea262f49789ae18fdd2c72
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jul 8 12:57:14 2008 +0200

    jedec_flash: Fix AM29DL800BB device ID

    As pointed out by Jerry Hicks, this patch corrects the device ID of
    the Spansion AM29DL800BB NOR device. Verified against latest Spansion
    datasheet (rev C4 from Dezember 2006).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Mon Jul 7 11:22:37 2008 +0900

    sh: Fix compile error sh7763rdp board

    Disable SH ether driver.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Tue Jul 8 12:03:24 2008 +0900

    sh: Fix SH-boards compile error

    By Cleanup out-or-tree building for some boards (.depend)
    (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
    because filse ware changed, some SH-boards have compile error.
    I revised this problem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Tue May 13 11:50:36 2008 +0800

    Feed the watchdog in u-boot for 8610 board.

    The watchdog on 8610 board is enabled by setting sw[6]
    to on. Once enabled, the watchdog can not be disabled
    by software. So feed the dog in u-boot is necessary for
    normal operation.

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>

commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Wed Jun 18 12:10:33 2008 -0400

    Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

    Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

    Remove duplicate code in a if/else block in
    cpu/arm926ejs/davinci/lxt972.c.
    Fixed style issues.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit fec61431a003f5778bafa2624073a571af8bec9f
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Wed Jun 18 12:10:31 2008 -0400

    Remove duplicate definitions in include/lxt971a.h.

    Remove duplicate definitions in include/lxt971a.h.

    Remove duplicate registers and bits definitions in
    include/lxt971a.h for standard MII registers, and
    use values in include/miiphy.h instead.

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 9751ee0990f467941da0b095a4e995f863672d7a
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Wed Jun 11 21:05:00 2008 +0900

    net: sh: Renesas SH7763 Ethernet device support

    Renesas SH7763 has 2 channel Ethernet device.
    This is 10/100/1000 Base support.
    But this patch check 10/100 Base only.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:28:05 2008 +0900

    sh: Update Renesas R2DPlus board

    New NOR Flash board support and remove old type flash board config.
    And Remove network setting from config file.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:28:01 2008 +0900

    sh: Update Renesas R7780MP board

    New NOR Flash board support and remove network setting from config file.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c001cd604e9f133743effbddb1c215b48e761c5a
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:56 2008 +0900

    sh: Update Renesas Migo-R board

    Remove network setting from config file.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:52 2008 +0900

    sh: Update Hitachi MS7722SE board

    Remove network setting from config file.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 26209e48e8791670c93108029a5c31a30016c6df
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:48 2008 +0900

    sh: Cleanup source code of SH7763RDP

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 5cd5b2c96ef0025762931349d350287aec03ab47
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:44 2008 +0900

    sh: Cleanup source code of R2DPlus

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:41 2008 +0900

    sh: Cleanup source code of R7780MP

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:38 2008 +0900

    sh: Cleanup source code of MS7722SE

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Tue Jun 17 16:27:34 2008 +0900

    sh: Cleanup source code of MS7720SE

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 3ab4827cbe409488ebea1a2ee5094783f2672214
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Jul 7 00:45:03 2008 +0200

    SH: fix out of tree building

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9047bfa1e737d787be460387dd6f45737eeceb10
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Thu Jul 3 23:16:06 2008 +0900

    net: smc911x: Fix typo

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Wed Jul 2 18:54:08 2008 +0200

    update mvBL-M7 board config

    update mvBL-M7 config file to use UBOOT_VERSION and define
    CONFIG_HIGH_BATS.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Mon Jun 30 17:45:01 2008 +0900

    net: fix compile problem in smc911x driver.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 9fea65a6c469b1b474b27446feb58738baba2d31
Author: Michal Simek <monstr@monstr.eu>
Date:	Tue Jun 24 09:54:09 2008 +0200

    ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405

    This change helps with better handling with others
    Xilinx based platform.

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Acked-by: Stefan Roese <sr@denx.de>

commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Tue Jun 17 13:07:11 2008 +0900

    net: ne2000: Move dev_addr variable from grobal to local.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Tue Jun 17 13:07:15 2008 +0900

    net: ne2000: Fix compile error of NE2000

    If enable DEBUG, can not compile ne2000 driver.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Mon Jun 23 22:57:27 2008 -0700

    Add mechanisms for CPU and board-specific Ethernet initialization

    This patch is the first step in cleaning up net/eth.c, by moving Ethernet
    initialization to CPU or board-specific code.  Initial implementation is
    only on the Freescale TSEC controller, but others will be added soon.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 7754f2be5d1835d263aad21b5a629526f3e680b0
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Jul 6 01:21:46 2008 +0200

    include/sha256.h: fix file permissions.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
Author: Patrice Vilchez <patrice.vilchez@atmel.com>
Date:	Tue May 27 11:15:29 2008 +0200

    [AT91SAM9] Fix NAND FLASH timings

    Fix NAND FLASH timings for at91sam9x evaluation kits.

    New timings are based on application note
    "NAND Flash Support on AT91SAM9 Microcontrollers" available at
    http://atmel.com/dyn/resources/prod_documents/doc6255.pdf

    Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Acked-by: Stelian Pop <stelian@popies.net>

commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 22 00:15:40 2008 +0200

    Fix boot from NOR due to incorrect reset delay.

    AT91 RSTC registers are battery-backuped, so their values
    are not reset across power cycles. One of those registers,
    the AT91_RSTC_MR register, is being modified by U-Boot, in
    the ethernet initialisation routine, to generate a 500ms
    user reset.

    Unfortunately, this value is not being restored afterwards,
    causing subsequent resets to also last for 500ms.

    This long reset sequence causes problems (at least) in the
    boot sequence from NOR: by the time the CPU tries to load
    a program from the NOR flash, the latter is still in reset
    and not yet available.

    Additionaly, this patch fixes a bug in the original code which
    caused the reset delay to last for 2s instead of 500ms.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f492dd636fbbae529e17533995bc6e5813c007f6
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Jul 4 20:11:49 2008 +0200

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Jul 4 20:07:35 2008 +0200

    CCM/SCM boards: fix out of tree building

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ab4c3a490df9a964711556d2a05b0c787db45fde
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 3 23:22:27 2008 +0200

    SCM board: fix build errors.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a566466f17ba0e2d2b6c250e77da678fb932470d
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 3 23:06:36 2008 +0200

    IAD210 board: fix ``"ALIGN" redefined'' warning.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ad756314797c16fa5dca23e115aab881011f164f
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 3 23:00:24 2008 +0200

    CCM board: fix build errors.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Wed Jul 2 18:54:08 2008 +0200

    update mvBL-M7 board config

    update mvBL-M7 config file to use UBOOT_VERSION.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit ced209c50e80c25f13c083099b05044048d21f4f
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 3 22:39:21 2008 +0200

    sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 3 22:34:08 2008 +0200

    Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 730f298485984b011b6ee8f4acb511cb45a843dd
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Jul 3 22:04:17 2008 +0200

    lmb: fix "implicit declaration of function 'lmb_free'" warning

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 322ef5e28d2dc62571afc699b00add22a8e006e4
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jul 2 23:53:23 2008 +0200

    Cleanup: remove redundant deleting on *~ files

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c8a3b109f07f02342d097b30908965f7261d9f15
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jul 2 23:49:18 2008 +0200

    Cleanup out-or-tree building for some boards (.depend)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jul 2 23:38:50 2008 +0200

    Cleanup: fix out-of-tree building for some boards

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 461fa68d20861811487944d22291db5a13410e20
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Jul 2 23:00:14 2008 +0200

    Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5981ebd32017e062b08aa6747cf591276f2db779
Author: Detlev Zundel <dzu@denx.de>
Date:	Fri Jun 20 22:26:24 2008 +0200

    fdt: Fix typo in variable name.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
Author: Gary Jennejohn <garyj@denx.de>
Date:	Thu Jun 19 11:11:19 2008 +0200

    Add logos for RRvision board

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
Author: Esben Haabendal <EsbenHaabendal@gmail.com>
Date:	Wed Jun 18 11:03:57 2008 +0200

    mpc8260: add fdt_fixup_ethernet support

    Add support for updating mac-address and local-mac-address in fdt for
    all MPC8260 targets.

    Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>

commit f6a69559d64498a04e1e0b087a9b920e5775f866
Author: Steven A. Falco <sfalco@harris.com>
Date:	Thu Jun 12 13:24:42 2008 -0400

    cmd_nvedit.c: clean up syntax highlighting

    My text-editor (vim) has a bit of trouble syntax-highlighting the
    cmd_nvedit.c file, because it apparently does not parse C
    ifdef/else/endif. The following patch does not change the behavior of
    the code at all, but does allow the editor to properly
    syntax-highlight the file.

    Signed-off-by: Steve Falco <sfalco@harris.com>

commit 75678c807a6272ecc5541eb32898c93887f08400
Author: Steven A. Falco <sfalco@harris.com>
Date:	Thu Jun 12 13:22:12 2008 -0400

    Make setenv() return status

    Currently, the setenv function does not return an error code.
    This patch allows to test for errors.

    Signed-off-by: Steve Falco <sfalco@harris.com>

commit 4928e97c8531283ca9b368b7c29a8a12e726562a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jun 11 10:14:06 2008 -0500

    PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops

    fls64, __ilog2_u64, ffs64 are variants that work on an u64,
    and fls is used to implement them.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 83002a77cbdf383015ca384eff5fa31722d8e571
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Mon Jun 9 22:58:48 2008 +0200

    i.MX31: Cleanup comments in lowlevel_init.S.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Jun 8 23:28:33 2008 -0700

    Move conditional compilation of MPC8XXX SPI driver to Makefile

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d92ea21bafb674ee2bf27447970b047845e7b0a2
Author: Juergen Kilb <J.Kilb@gmx.de>
Date:	Sun Jun 8 17:59:53 2008 +0200

    i.MX31: fixed CTRL-C detection

    The Register URXD contains status information in bits [15..8].
    With status bit 15 set, CTRL-C was reported as 0x8003 instead
    of 0x03. Therefore CTRL-C was not detected.
    To solve this, bits [15..8] were masked out now.

    Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
    Acked-by: Felix Radensky <felix@embedded-sol.com>

commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jul 1 17:03:19 2008 +0200

    ppc4xx: Fix 460EX/GT PCIe port initialization

    This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
    configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
    this out.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit b571afde0295b007a45055ee49f8822c753a5651
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Jun 7 12:29:52 2008 +0200

    add SHA256 support

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>

commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Jun 6 23:07:40 2008 +0200

    Delay FIT format check on sector based devices

    Global FIT image operations like format check cannot be performed on
    a first sector data, defer them to the point when whole FIT image was
    uploaded to a system RAM.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
    NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>

commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
Author: Dave Liu <r63238@freescale.com>
Date:	Tue Jun 3 17:38:19 2008 +0800

    sata: wait for device updating signature to host

    The driver need wait for the device updating signature to host.
    If we don't wait for it, the driver can not detect the device(disk)
    when the system powers up.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jun 28 14:56:17 2008 +0200

    ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic

    This patch implements a fix provided by AMCC so that the lockup upon
    simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
    anymore:

    Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
    (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
    USB 2.0 host and SATA.

    This errata is not officially available yet. I'll update the comment
    to add the errata number later.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8b616edb118e37d05f6401389eaee1c636b22828
Author: Stuart Wood <stuart.wood@labxtechnologies.com>
Date:	Mon Jun 2 16:42:19 2008 -0400

    serial_pl010.c: add watchdog support

    Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>

commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
Author: Stuart Wood <stuart.wood@labxtechnologies.com>
Date:	Mon Jun 2 16:40:08 2008 -0400

    jffs2_1pass.c: add watchdog support

    Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>

commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
Author: Sascha Laue <sascha.laue@liebherr.com>
Date:	Fri May 30 09:48:14 2008 +0200

    Configure DSP POST; add watchdog reset to diag command

    Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>

commit f13526517859bf6b573e23ff47199e107d1009b5
Author: Tor Krill <tor@excito.com>
Date:	Thu May 29 10:40:17 2008 +0200

    Add sata sil3114 support

    Signed-off-by: Tor Krill <tor@excito.com>

commit e093a247628228100f405b6d7f6b1bfc16141938
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Jun 28 23:34:37 2008 +0200

    Coding Style Cleanup

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Jun 28 23:16:01 2008 +0200

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date:	Wed May 21 13:58:41 2008 -0400

    ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)

    This patch adds support for the Lyrtech SFF-SDR board,
    based on the TI DaVinci architecture (ARM926EJS).

    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
    Signed-off-by: Philip Balister <philip@balister.org>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 341188b9ccaa8d4462d772cc067aca8d7618633a
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu May 22 11:09:59 2008 +0200

    MMC: Consolidate MMC/SD command definitions

    This moves the MMC and SD Card command definitions from
    include/asm/arch/mmc.h into include/mmc.h. These definitions are
    given by the MMC and SD Card standards, not by any particular
    architecture.

    There's a lot more room for consolidation in the MMC drivers which
    I'm hoping to get done eventually, but this patch is a start.

    Compile-tested for all avr32 boards as well as lpc2292sodimm and
    lubbock. This should cover all three mmc drivers in the tree.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit fa60edfc4c952626e048c0e065f654b3c1822fa5
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Wed May 21 14:38:08 2008 +0900

    Use better Ethernet timings for apollon board

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 41c5eaa7253ed82bbae1eda5667755872c615164
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jun 16 13:58:56 2008 -0500

    Resize device tree to allow space for board changes and the chosen node

    Current code requires that a compiled device tree have space added to the end to
    leave room for extra nodes added by board code (and the chosen node).  This
    requires that device tree creators anticipate how much space U-Boot will add to
    the tree, which is absurd.	Ideally, the code would resize and/or relocate the
    tree when it needed more space, but this would require a systemic change to the
    fdt code, which is non-trivial.  Instead, we resize the tree inside
    boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
    where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 7570a9941fc565922078679a72d246fe208d696d
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jun 16 13:58:55 2008 -0500

    Fix an underflow bug in __lmb_alloc_base

    __lmb_alloc_base can underflow if it fails to find free space.  This was fixed
    in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc.  This patch
    merely updates __lmb_alloc_base to resemble the current version in Linux.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jun 16 13:58:54 2008 -0500

    Add lmb_free

    lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
    lmb_reserve to temporarily reserve some memory.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Jun 16 13:58:53 2008 -0500

    Add ALIGN() macro

    ALIGN() returns the smallest aligned value greater than the passed
    in address or size.  Taken from Linux.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jun 24 17:15:22 2008 +0200

    ppc4xx: Fix compilation problems with phys_size_t

    This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
    board specific files where it has been missing.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 28eab0d77352b84885f938759bf2612b7bf0bc44
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Mon May 19 12:26:38 2008 +0200

    Conditionally add -fno-stack-protector to CFLAGS

    When compile-testing on powerpc, I get errors like this:

    net/nfs.c:422: undefined reference to `__stack_chk_fail_local'

    This seems to be because -fstack-protector is on by default, so
    let's explicitly disable it on all architectures that support the
    option.

    The Ubuntu toolchain is affected by this problem, and according to
    Mike Frysinger, Gentoo has been running with SSP enabled for years.
    More and more distros are turning SSP on by default, so this problem
    is likely to get worse in the future.

    Also, powerpc just happens to be one of the arches I do
    compile-testing on. There may be other arches affected by this too.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:52 2008 +0200

    pcmcia/ti_pci1410a: Move compile condition to the Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:51 2008 +0200

    pxa_pcmcia: Move compile condition to the Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:50 2008 +0200

    marabun_pcmcia: Move compile condition to the Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6a19c46cae43c16c528eddefae3db97134f1915d
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Mon Jun 23 13:25:34 2008 +0200

    fix non-working mvBL-M7

    Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 846f1574ddddeda2bc227655e687308695f41cdc
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Mon Jun 23 11:40:56 2008 +0200

    fix system config overwrite @ MPC834x and MPC8313

    During 83xx setup the "System I/O configuration register high" gets
    overwritten with user defined value if CFG_SICRH is defined.

    Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
    must keep their reset value regardless of configuration.

    On my board (using RGMII) those bits are set after reset - yet it's
    unclear where they come from.

    The patch keeps both bits on MPC834x and MPC8313.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jun 17 17:45:27 2008 -0500

    mpc83xx: move CPU_TYPE_ENTRY over to processor.h

    to avoid this:

    cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
    In file included from cpu.c:33:
    /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 23 11:15:09 2008 +0200

    ppc4xx: Fix problem in gpio_config()

    As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
    left by one. So the additional shift is bogus.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 40777812316fc252c941665c0f60c148fd79d50f
Author: Detlev Zundel <dzu@denx.de>
Date:	Fri Jun 20 22:24:05 2008 +0200

    fdt: Fix typo in variable name.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 5f723a3b98c630bde33de74351f2121691fdef14
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri Jun 20 10:41:05 2008 +0200

    avr32: Enable SPI flash support on ATNGW100

    The ATNGW100 has 8MB DataFlash on board. Give users access to it through
    the new SPI flash framework.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri Jun 20 12:44:28 2008 +0200

    avr32: Fix SPI portmux initialization

    Use the new GPIO manipulation functions to set up the chip select lines,
    and make sure both busses use GPIO for chip select control.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
Author: Peter Ma <pma@mediamatech.com>
Date:	Sun Jun 1 22:59:24 2008 -0700

    avr32: Add GPIO manipulation functions

    Adds GPIO manipulation functions for AVR32 AP7 platform.

    Signed-off-by: Peter Ma <pma@mediamatech.com>
    [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:02:30 2008 +0200

    MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver

    This patch is based on the following patch sent a few minutes ago:
    "NAND FSL UPM: driver re-write using the hwcontrol callback"
    It is untested, of course. Anton, could you please give it a try.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 96026d42fa4e646d28318c0a1438aac4b2017909
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Jun 12 12:40:11 2008 +0200

    Fix 4xx build issue

    Building for 4xx doesn't work since commit 4dbdb768:

    In file included from 4xx_pcie.c:28:
    include/asm/processor.h:971: error: expected ')' before 'ver'
    make[1]: *** [4xx_pcie.o] Error 1

    This patch fixes the problem.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit a036b0443657fe0f4773786de9092251869f08ac
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Jun 19 01:45:50 2008 -0500

    MPC8610HPCD: Report board id, board version and fpga version.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Jun 19 01:45:27 2008 -0500

    MPC8641HPCN: Report board id, board version and fpga version.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 16 10:40:02 2008 +0200

    cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably

    This patch simplifies flash_toggle() (AMD commandset), which is used to
    detect if a FLASH device is still busy with erase/program operations. On
    800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
    did not detect the busy state reliably, resulting in non erased sectors
    etc. This patch now simplifies this function by "just" comparing the
    complete data-word instead of ANDing it with the command-word (0x40)
    before the compatison. It is done the same way in the Linux implementation
    chip_ready() in cfi_cmdset_0002.c.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
Author: Philip Balister <philip@balister.org>
Date:	Mon Jun 16 08:58:07 2008 -0400

    NAND: Add missing declaration to non-redundant saveenv().

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Mon Jun 2 15:09:55 2008 +0200

    MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jun 10 15:34:11 2008 +0200

    ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output

    This patch disables the square wave output of the M41T62 RTC used on
    Canyonlands & Glacier. Here the explanation:

    The serial real-time clock part used in the design is an
    STMicro M41T62. This part has a full-time 32KHz square wave
    output that is connected to the TmrClk input to the
    processor. The default state for this square wave output is
    enabled so the output runs continuously when the board is
    powered normally and also from the battery. The TmrClk input
    to the processor goes to ground when the power is removed
    from the board/processor, and therefore the running square
    wave output is driving ground which drains the battery quickly.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a94f22f08f280905926219e568568964cb9eeb9d
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Jun 11 18:10:20 2008 -0500

    Fix build issue with string.h and linux/string.h

    This commit:
    commit 338cc038461a6c7709c5b86fd9a240209338a1ae
    Author: Wolfgang Denk <wd@denx.de>
    Date:   Fri Jun 6 14:28:14 2008 +0200

	tools/mkimage: fix compiler warnings on some systems.

    Broke building on some systems, because the host's string.h was interfering
    with u-boot's linux/string.h.  It doesn't look like we need the u-boot one if
    we're building for the host, so now we only include when building inside
    u-boot.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 9973e3c614721bbf169882ffc3be266a6611cd60
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Jun 9 16:03:40 2008 -0500

    Change initdram() return type to phys_size_t

    This patch changes the return type of initdram() from long int to phys_size_t.
    This is required for a couple of reasons: long int limits the amount of dram
    to 2GB, and u-boot in general is moving over to phys_size_t to represent the
    size of physical memory.  phys_size_t is defined as an unsigned long on almost
    all current platforms.

    This patch *only* changes the return type of the initdram function (in
    include/common.h, as well as in each board's implementation of initdram).  It
    does not actually modify the code inside the function on any of the platforms;
    platforms which wish to support more than 2GB of DRAM will need to modify
    their initdram() function code.

    Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
    MPC8641HPCN.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 391fd93ab23e15ab3dd58a54f5b609024009c378
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Jun 9 20:37:18 2008 -0500

    Change lmb to use phys_size_t/phys_addr_t

    This updates the lmb code to use phys_size_t
    and phys_addr_t instead of unsigned long.  Other code
    which interacts with this code, like getenv_bootm_size()
    is also updated.

    Booted on MPC8641HPCN, build-tested ppc, arm, mips.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 61b09fc2952dc636017df4e7970e3de132276ba1
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Jun 9 20:37:17 2008 -0500

    Change print_size to take phys_size_t

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Mon Jun 9 20:37:16 2008 -0500

    Change bd/gd memsize/ram_size to be phys_size_t.

    Currently, both are defined as an unsigned long, but
    should be phys_size_t. This should result in no real change,
    since phys_size_t is currently an unsigned long for all the
    default configs.  Also add print_lnum to cmd_bdinfo to deal
    with the potentially wider memsize.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit ba04f7010958e88a8910f2a123fee53fdc72e013
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Jun 10 16:16:02 2008 -0500

    FSL LAW: Add new interface to use the last free LAW

    LAWs have the concept of priority so its useful to be able to allocate
    the lowest (highest number) priority.  We will end up using this with the
    new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 859a86a25c569d3665ff413d1d923394b8a961f3
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jun 11 00:51:45 2008 -0500

    85xx/86xx: Move to dynamic mgmt of LAWs

    With the new LAW interface (set_next_law) we can move to letting the
    system allocate which LAWs are used for what purpose.  This makes life
    a bit easier going forward with the new DDR code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>
    Acked-by: Becky Bruce <becky.bruce@freescale.com>

commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jun 11 00:44:10 2008 -0500

    FSL LAW: Keep track of LAW allocations

    Make it so we keep track of which LAWs have allocated and provide
    a function (set_next_law) which can allocate a LAW for us if one is
    free.

    In the future we will move to doing more "dynamic" LAW allocation
    since the majority of users dont really care about what LAW number
    they are at.

    Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit ddde74a159caa6e18b481fec01d40b885aebb566
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jun 9 22:31:57 2008 -0500

    85xx: remove dummy board_early_init_f

    A number of board ports have empty version of board_early_init_f
    for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 81e56e9af0d43712db8efb843606a8d62eab454f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jun 9 18:55:38 2008 -0500

    MPC8544DS: Update config.h

    * Enable flash progress
    * remove CLEAR_LAW0 since we dont really use it

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 978e81604c1b28526ed580df0fbe64eb8384e94f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Jun 9 13:37:24 2008 -0500

    85xx: Remove unused and unconfigured memory test code.

    Remove unused and unconfigured DDR test code from FSL 85xx boards.
    Besides, other common code exists.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:45 2008 +0200

    Socrates: Added FPGA base address update in FDT.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:44 2008 +0200

    Socrates: NAND support added. Changed the U-Boot base address and

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 248ae5cfc8bf69074d1da099dc495d8e06070547
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:43 2008 +0200

    NAND: Added support for 128-bit OOB, adapted

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 31ca0208612f2eb57690110d7c2815953650e47b
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:42 2008 +0200

    Socrates: added missed file with UPMA configuration data.

    Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:41 2008 +0200

    Socrates: Added FPGA mapping. LAWs and TLBs cleanup.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:40 2008 +0200

    Added the upmconfig() function for 85xx.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit d39e68514ff943930ee692cff3fde03532eb7fec
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Fri Jun 6 15:42:39 2008 +0200

    Socrates: config file cleanup.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit e8cc3f04b124f757af4528206e60d8eb715ae083
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:10 2008 +0200

    TQM85xx: Change memory map to support Flash memory > 128 MiB

    Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
    memory. The current memory map only supports up to 128 MiB Flash.
    This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
    set, up to 1 GiB flash is supported. To achieve this, the memory
    map has to be adjusted in great parts (for example the CCSRBAR is
    moved from 0xE0000000 to 0xA0000000).

    If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
    memory map also has to be considered in the kernel (changed
    CCSRBAR address, changed PCI IO base address, ...). Please use
    an appropriate Flat Device Tree blob (tqm8548.dtb).

    Signed-off-by: Martin Krause <martin.krause@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:09 2008 +0200

    TQM85xx: NAND support via local bus UPMB

    This patch adds support for NAND FLASH on the TQM8548. It is disabled by
    default and can be enabled for the TQM8548 modules. It is now based on
    the re-written FSL NAND UPM driver. A patch has been posted earlier today
    with the subject:

    "NAND FSL UPM: driver re-write using the hwcontrol callback"

    Note that the R/B pin is not supported by that module requiring to use
    the specified maximum delay time.

    Note: With NAND support enabled the size of the U-Boot image exceeds
    256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
    doubling the image size :-(.

    Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit b9e8078bb3f3c48111a7081e27279938c3a445e1
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:08 2008 +0200

    TQM8548: PCI express support

    This patch adds support for PCI express cards. The board support
    now uses common FSL PCI init code, for both, PCI and PCIe on all
    TQM85xx modules.

    Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:07 2008 +0200

    TQM8548: Basic support for the TQM8548 modules

    This patch adds basic support for the TQM8548 module from TQ-Components
    (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
    eTSEC 3 and 4

    Furthermore Flash buffer write has been enabled to speed up output to
    the Flash by approx. a factor of 10.

    Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 25991353204c78b094c3c1fec90182dcd607ab8f
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:06 2008 +0200

    TQM85xx: Support for Flat Device Tree

    This patch adds support for Linux kernels using the Flat Device Tree.
    It also re-defines the default environment settings for booting Linux
    with the FDT blob.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit d9ee843d54c54776e1fdb86336ce554906a87331
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:05 2008 +0200

    TQM85xx: Support for Intel 82527 compatible CAN controller

    This patch adds initialization of the UPMC RAM to support up to two
    Intel 82527 compatible CAN controller on the TQM85xx modules.

    Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 518d5cfe72916323c746af1647764459914f555f
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:04 2008 +0200

    TQM85xx: Bugfix in the SDRAM initialisation

    The CS0_BNDS register is now set according to the detected
    memory size.

    Signed-off-by Martin Krause <martin.krause@tqs.de>

commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:03 2008 +0200

    TQM85xx: Fix chip select configuration for second FLASH bank

    This patch fixes the re-calculation of the automatic chip select
    configuration for boards with two populated FLASH banks.

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:02 2008 +0200

    TQM85xx: Support for Spansion 'N' type flashes added

    The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
    than the formerly used 'M' types (S29GLxxxM series), so the flash layout
    needs to be changed -> new start address of the environment. The macro
    definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
    defined for boards with 'N' type flashes.

    Signed-off-by: Martin Krause <martin.krause@tqs.de>
    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 5d5bd838f76eade22c0ea40a500389f924d0da36
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:01 2008 +0200

    TQM85xx: Fix CPM port pin configuration

    Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
    board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
    as serial interface anyway. Worse, on some board variants configuring the
    pins for SCC1 leads to short circuits (for example on the TQM8541-BG).

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit b99ba1679e8cd51b023e67098c89e606e47137d2
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:12:00 2008 +0200

    TQM85xx: Various coding style fixes

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Tue Jun 10 22:15:58 2008 -0400

    libfdt: Move the working_fdt pointer to cmd_fdt.c

    The working_fdt pointer was declared in common/fdt_support.c but was
    not used there.  Move it to common/cmd_fdt.c where it is used (it is
    also used in lib_ppc/bootm.c).

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jun 10 11:06:17 2008 -0500

    fdt: unshadow global working fdt variable

    differentiate with local variables of the same name by renaming the
    global 'fdt' variable 'working_fdt'.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
Author: Andy Fleming <afleming@freescale.com>
Date:	Tue Jun 10 18:49:34 2008 -0500

    socrates: Fix PCI clk fix patch

    The submitted patch seems to have been more up-to-date, but an older patch was
    already in the repository.	This patch encompasses the differences

    Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:02:29 2008 +0200

    NAND FSL UPM: driver re-write using the hwcontrol callback

    This is a re-write of the NAND FSL UPM driver using the more universal
    hwcontrol callback (instead of the cmdfunc callback). Here is a brief
    list of furher modifications:

    - For the time being, the UPM setup writing the UPM array has been
      removed from the driver and must now be done by the board specific
      code.

    - The bus width definition in "struct fsl_upm_nand" is now in bits to
      comply with the corresponding Linux driver and 8, 16 and 32 bit
      accesses are supported.

    - chip->dev_read is only set if fun->dev_ready != NULL, which is
      required for boards not connecting the R/B pin.

    - A few issue have been fixed with MxMR bit manipulation like in the
      corresponding Linux driver.

    Note: I think the "io_addr" field of "struct fsl_upm" could be removed
	  as well, because the address is already determined by
	  "nand->IO_ADDR_[RW]", but I'm not 100% sure.

    This patch has been tested on a TQM8548 modules with the NAND chip
    Micron MT29F8G08FABWP.

    This patch is based on the following patches posted to this list a few
    minutes ago:

      PPC: add accessor macros to clear and set bits in one shot
      83xx/85xx/86xx: add more MxMR local bus definitions

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 6beecfbb542992eede5831240cd58678274683a9
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Thu Jun 5 13:11:59 2008 +0200

    MPC85xx: Beautify boot output of L2 cache configuration

    The boot output is now aligned poperly with other boot output
    lines, e.g.:

      FLASH: 128 MB
      L2:    512 KB enabled

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 398415114f0a705163a14543e9fef03f734b1ffa
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Jun 4 12:45:22 2008 +0200

    PPC: add accessor macros to clear and set bits in one shot

    PPC: add accessor macros to clear and set bits in one shot

    This patch adds macros from linux/include/asm-powerpc/io.h to clear and
    set bits in one shot using the in_be32, out_be32, etc. accessor functions.
    They are very handy to manipulate bits it I/O registers.

    This patch is required for my forthcoming FSL NAND UPM driver re-write and
    the support for the TQM8548 module.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 4677988c7edc070c3786d3db7994abeca3ab82a0
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed Jun 4 13:52:17 2008 +0200

    TQM: move TQM boards to board/tqc

    Move all TQM board directories to the vendor specific directory "tqc"
    for modules from TQ-Components GmbH (http://www.tqc.de).

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Mon Jun 2 12:09:30 2008 +0200

    83xx/85xx/86xx: add more MxMR local bus definitions

    83xx/85xx/86xx: add more MxMR local bus definitions

    This patch adds more macro definitions for the UPM Machine Mode Registers
    They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
    common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
    required for my forthcoming FSL NAND UPM driver re-write and the support
    for the TQM8548 module.

    This patch is based on the following two patches from Anton Vorontsov:

    http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
    http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html

    I leave coding style violation fixes, code beautification and name
    corrections to somebody else ;-(.

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

commit c8c5fc266e4499e283c293ccb972863156aa4134
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu May 29 18:14:56 2008 +0400

    83xx/85xx: further localbus cleanups

    Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
    from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 42dbd667c88d496882d53e22656e89b654205492
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Wed May 28 18:20:15 2008 +0400

    83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h

    This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
    use it on MPC85xx and MPC86xx processors.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu May 29 11:22:06 2008 -0500

    85xx: Add setting of cache props in the device tree.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 4dbdb7681e243431530df0725627192a0c4aefda
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Jun 10 16:53:46 2008 -0500

    85xx: expose cpu identification

    The current cpu identification code is used just to return the name
    of the processor at boot.  There are some other locations that the name
    is useful (device tree setup).  Expose the functionality to other bits
    of code.

    Also, drop the 'E' suffix and add it on by looking at the SVR version
    when we print this out.  This is mainly to allow the most flexible use
    of the name.  The device tree code tends to not care about the 'E' suffix.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jun 10 13:25:24 2008 -0500

    mpc83xx: MVBLM7: minor build fixups

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit a1293e549b56da135ef32ffca5b9d35a16aa6802
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Tue Jun 10 09:14:05 2008 +0200

    add MPC8343 based board mvBlueLYNX-M7 (board+make files)

    Add MPC8343 based board mvBlueLYNX-M7.
    It's a single board stereo camera system.
    Please read doc/README.mvblm7 for details.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit c005b93925ba49f07da2aa748527996d927e172f
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Tue Jun 10 09:13:16 2008 +0200

    add MPC8343 based board mvBlueLYNX-M7 (doc+config)

    Add MPC8343 based board mvBlueLYNX-M7.
    It's a single board stereo camera system.
    Please read doc/README.mvblm7 for details.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu May 29 18:14:56 2008 +0400

    83xx/85xx: further localbus cleanups

    move the BRx_* and ORx_* left behind in mpc85xx.h

    The same is needed for mpc8xx.h and mpc8260.h (defines are almost
    the same, just few differences which needs some attention though).

    But the bad news for mpc8xx and mpc8260 is that there are a lot of users
    of these defines. So this cleanup I'll leave for the "better times".

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Wed May 28 18:20:15 2008 +0400

    83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h

    This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
    use it on MPC85xx and MPC86xx processors.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Acked-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
Author: Tor Krill <tor@excito.com>
Date:	Mon Jun 2 15:09:30 2008 +0200

    Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h

    Signed-off-by: Tor Krill <tor@excito.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Mon Jun 9 23:37:44 2008 +0900

    net: Conditional COBJS inclusion of network drivers

    Replace COBJS-y with appropriate driver config names.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Mon Jun 9 21:02:17 2008 -0400

    Use strncmp() for the fdt command

    Cleaner than doing multiple conditionals on characters.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Jun 7 12:25:05 2008 -0400

    The fdt boardsetup command criteria was not unique

    It was checking just for "b", which is not unique with respect to the
    "boot" command.  Change to check for "boa"[rdsetup].

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 2f08bfa9526bae4f461e043530cfb903fec0d273
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Tue May 20 17:19:11 2008 +1000

    libfdt: Several cleanups to parameter checking

    This patch makes a couple of small cleanups to parameter checking of
    libfdt functions.

	- In several functions which take a node offset, we use an
    idiom involving fdt_next_tag() first to check that we have indeed been
    given a node offset.  This patch adds a helper function
    _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().

	- In fdt_rw.c in several places we have the expanded version
    of the RW_CHECK_HEADER() macro for no particular reason.  This patch
    replaces those instances with an invocation of the macro; that's what
    it's for.

	- In fdt_sw.c we rename the check_header_sw() function to
    sw_check_header() to match the analgous function in fdt_rw.c, and we
    provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
    functions in fdt_rw.c

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Tue Jun 3 20:34:45 2008 -0400

    Remove the deprecated CONFIG_OF_FLAT_TREE

    Use CONFIG_OF_LIBFDT instead to support flattened device trees.  It is
    cleaner, has better functionality, and is better supported.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 62bcdda293efa752f8281fbd9da03822b27ce82f
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Tue Jun 3 20:26:29 2008 -0400

    Change the stxxst to CONFIG_OF_LIBFDT

    This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
    to CONFIG_OF_LIBFDT.

    WARNING: It appears that this board lost its ability to boot via a
    flattened device tree prior to this changeset.

    WARNING: This conversion was untested because I do not have a board to
    test it on.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 589c04271d129729a8b01391453851ab9cc4069c
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Tue Jun 3 20:24:58 2008 -0400

    Convert mpc7448hpc2 to CONFIG_OF_LIBFDT

    This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
    to CONFIG_OF_LIBFDT.

    WARNING: This conversion is untested because I do not have a board to
    test it on.

    NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
    /aliases/ethernet1 property for the ethernet to work.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit ee1e35bede91debc8bff9b02f75574486033b652
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu May 29 01:21:24 2008 -0500

    85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3b9519fc50802436e417c839e69df7b2016cade5
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed May 14 13:10:04 2008 -0500

    MPC85xx: Change traps.c to not reference non-addressable memory

    Currently, END_OF_RAM is used by the trap code to determine if
    we should attempt to access the stack pointer or not. However,
    on systems with a lot of RAM, only a subset of the RAM is
    guaranteed to be mapped in and accessible.	Change END_OF_RAM
    to use get_effective_memsize() instead of using the raw ram
    size out of the bd.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Mon Jun 9 13:39:57 2008 +0900

    sh: Renesas Solutions SH7763RDP board support

    SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
    In this patch, support SCIF, NOR Flash, and Ethernet.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 60179098a95eaa972007d7ec58e4c1588029720f
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Jun 6 16:24:13 2008 +0900

    sh: Add support Renesas SH7763

    Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
    This patch supprts CPU register's header file.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date:	Fri Jun 6 16:16:08 2008 +0900

    sh: SH7763 SCIF support

    SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
    but only SCIF2 is different. This patch work all SCIF channel.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 79b51ff8205f0354d5300570614c1d2db499679c
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat Jun 7 20:51:59 2008 +0900

    [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines

    Also get rid of some #ifdefs in *.c files.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat Jun 7 20:51:56 2008 +0900

    [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*

    CONFIG_SOC_AU1X00

      Common Alchemy Au1x00 stuff. All Alchemy processor based machines
      need to have this config as a system type specifier.

    CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
    CONFIG_SOC_AU1500, CONFIG_SOC_AU1550

      Machine type specifiers. Each port should have one of aboves.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
Author: Stuart Wood <stuart.wood@labxtechnologies.com>
Date:	Fri May 30 16:05:28 2008 -0400

    env_nand.c: Added bad block management for environment variables

    Modified to check for bad blocks and to skipping over them when
    CFG_ENV_RANGE has been defined.
    CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
    flash block size.

    Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 279726bd00558e80263d44581c44167625b7fb9a
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed May 14 13:09:58 2008 -0500

    MPC86xx: Change traps.c to not reference non-addressable memory

    Currently, END_OF_RAM is used by the trap code to determine if
    we should attempt to access the stack pointer or not. However,
    on systems with a lot of RAM, only a subset of the RAM is
    guaranteed to be mapped in and accessible.	Change END_OF_RAM
    to use get_effective_memsize() instead of using the raw ram
    size out of the bd to prevent us from trying to access
    non-mapped memory.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 338cc038461a6c7709c5b86fd9a240209338a1ae
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Jun 6 14:28:14 2008 +0200

    tools/mkimage: fix compiler warnings on some systems.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jun 6 16:10:41 2008 +0200

    ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options

    We use upper case letters for the AMCC processor defines (like
    CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
    not CONFIG_440SPe. This patch fixes the last misspelled config options.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 72675dc6c06a48846d180106161d49dd714383cc
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jun 6 15:55:21 2008 +0200

    ppc4xx: Unify AMCC's board config files (part 3/3)

    This patch series unifies the AMCC eval board ports by introducing
    a common include header for all AMCC eval boards:

    include/configs/amcc-common.h

    This header now includes all common configuration options/defines which
    are removed from the board specific headers.

    The reason for this is ease of maintenance and unified look and feel
    of all AMCC boards.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 490f204096d6e2c9940f67816f154a8125bab116
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jun 6 15:55:03 2008 +0200

    ppc4xx: Unify AMCC's board config files (part 2/3)

    This patch series unifies the AMCC eval board ports by introducing
    a common include header for all AMCC eval boards:

    include/configs/amcc-common.h

    This header now includes all common configuration options/defines which
    are removed from the board specific headers.

    The reason for this is ease of maintenance and unified look and feel
    of all AMCC boards.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jun 6 15:54:31 2008 +0200

    ppc4xx: Unify AMCC's board config files (part 1/3)

    This patch series unifies the AMCC eval board ports by introducing
    a common include header for all AMCC eval boards:

    include/configs/amcc-common.h

    This header now includes all common configuration options/defines which
    are removed from the board specific headers.

    The reason for this is ease of maintenance and unified look and feel
    of all AMCC boards.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
Author: Remy Bohmer <linux@bohmer.net>
Date:	Thu Jun 5 13:03:36 2008 +0200

    DM9000 fix status check fail 0x6d error for trizeps board

    According to the Application Notes of the DM9000, only the 2 bits 0:1 of
    the status byte need to be checked to identify a valid packet in the fifo

    But, The several different Application Notes do not all speak the same
    language on these bits. They do not disagree, but only 1 Application Note
    noted explicitly that only these 2 bits need to be checked.
    Even the datasheets do not mention anything about these 2 bits.

    Because the old code, and the kernel check the whole byte, I left this piece
    untouched.

    However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
    it should work.

    Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
    in the fifo) is much shorter now, compared to the older U-boot driver code,
    so that we can maybe run into a hardware condition now that was never seen
    before, or maybe was seen very unfrequently.

    Additionaly added a cleanup of a stack variable.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Jun 5 22:29:00 2008 +0900

    [MIPS] Update <asm/addrspace.h> header

    - Fix traditional KSEG names
    - Replace PHYSADDR with CPHYSADDR

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit f0d5a6f060d00358b85c62a921a423ea8df71184
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Jun 5 22:29:00 2008 +0900

    [MIPS] mips_config.mk: Misc fixes

    - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
    - Modify comments

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 5f64d21c9a2998794f255b469165b91f092dfc2d
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Jun 5 22:29:00 2008 +0900

    [MIPS] Kill unused <version.h> inclusions

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit a55d48174cfd1a5bc184159513f48dcbbe409c83
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Jun 5 22:29:00 2008 +0900

    [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines

    MIPS port has two problems in timer routines. One is now we assume CFG_HZ
    equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
    in the U-Boot system.

    The other is we don't have a proper time management counter like timestamp
    other ARCHs have. We need the 32-bit millisecond clock counter.

    This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
    32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
    of calculated CP0 counter cycles in a CFG_HZ.

    STRATEGY:

    * Fix improper CFG_HZ value to have 1000

    * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.

    * timer_init: initialize timestamp and set up the first timer expiration.
      Note that we don't need to initialize CP0 count/compare registers here
      as they have been already zeroed out on the system reset. Leave them as
      they are.

    * get_timer: calculate how many timestamps have been passed, then return
      base-relative timestamp. Make sure we can easily count missed timestamps
      regardless of CP0 count/compare value.

    * get_ticks: return the current timestamp, that is get_timer(0).

    Most parts are from good old Linux v2.6.16 kernel.

    v2:
    - Remove FIXME comments as they turned out to be trivial.
    - Use CP0 compare register as a global variable for expirelo.
    - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
      instead.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Jun 5 22:29:00 2008 +0900

    [MIPS] lib_mips/time.c: Fix udelay

    What we have to do is just to wait for given micro-seconds. No need to
    take into account current time, get_timer and CFG_HZ.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Jun 5 22:28:59 2008 +0900

    [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros

    We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
    This patch replaces mips_{compare,count}_set and mips_count_get with
    existing macros.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:48:17 2008 +0200

    Get rid of annoying/superfluous bad-checksum warning message

    U-boot can complain a lot about 'checksum bad' when it is attached to the network.
    It is annoying for ordinary users who start to doubt the network connection
    in general when they see messages like this.

    This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
    than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
    now before checking the checksum.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Jun 4 10:47:25 2008 +0200

    Fix order for reading rx-status registers in 32bit mode of DM9000

    A last minute cleanup before submitting the DM9000A patch series yesterday introduced
    a bug in reading the rx-status registers in 32bit mode only.
    This patch repairs this.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 98291e2e689096420465074cce926b226d2e71b4
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:26:26 2008 +0200

    DM9000: Some minor code cleanups

    Some lines of the U-boot DM9000x driver are longer than 80 characters, or
    need some other minor cleanup.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 850ba7555dbd4ca8d14fc475b864d534797adab3
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:26:25 2008 +0200

    DM9000: Make driver work properly for DM9000A

    The DM9000A network controller does not work with the U-boot DM9000x driver.
    Analysis showed that many incoming packets are lost.

    The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
    check for a valid rx packet be done on the interrupt status register, not
    directly by performing the dummy read and the rx status check as is currently
    the case in the u-boot driver.

    When the recommended poll is done as suggested the driver starts working
    correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
    can be more than 1 package in the fifo at the same time.

    The driver must perform the rx-status check in a loop and read and handle all
    packages until there is no more left _after_ the interrupt RX flag is set.

    This change has been tested with DM9000A, DM9000E, DM9000EP.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:26:24 2008 +0200

    DM9000: Improve eth_reset() routine

    According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
    reset procedure must be done twice to properly reset the DM9000 by means of software.
    This errata is not needed anymore for the DM9000A, but it does not bother it.

    This change has been tested with DM9000A, DM9000E, DM9000EP.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit acba31847fad9ae40708cc2c9f3a634ec35f3416
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:26:23 2008 +0200

    DM9000: improve eth_send() routine

    The eth_send routine of the U-boot DM9000x driver does not match the
    DM9000 or DM9000A application notes/programming guides.

    This change improves the stability of the DM9000A network controller.

    This change has been tested with DM9000A, DM9000E, DM9000EP.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 134e266253c02a7832560da59d394989c4f64453
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:26:22 2008 +0200

    DM9000: repair debug logging

    It seems that the debugging code of the DM9000x driver in U-boot has not been
    compiled for a long time, because it cannot compile...

    Also rearranged some loglines to get more useful info while debugging.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit a101361bfe23c120321e45d114c0603b8e0763e9
Author: Remy Bohmer <linux@bohmer.net>
Date:	Tue Jun 3 15:26:21 2008 +0200

    DM9000: Add data bus-width auto detection.

    The U-boot DM9000x driver contains a compile time bus-width definition for
    the databus connected to the network controller.

    This compile check makes the code unclear, inflexible and is unneccessary.
    It can be asked to the network controller what its bus-width is by reading bits
    6 and 7 of the interrupt status register.

    The linux kernel already uses a runtime mechanism to determine this bus-width,
    so the implementation below looks somewhat like that implementation.

    This change has been tested with DM9000A, DM9000E, DM9000EP.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 63a0afa0c32e5f4ea98a9439542870072437404d
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jun 4 19:19:20 2008 +0200

    ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port

    This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
    introduced by the commit:

    ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S

    With this patch SDRAM will get initialized again and booting from NAND
    is working again.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>

commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue May 27 14:19:30 2008 +0200

    Socrates: Fix PCI bus frequency report

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
Author: Tor Krill <tor@excito.com>
Date:	Thu May 29 11:10:30 2008 +0200

    Fix incorrect switch for IF_TYPE in part.c

    Use correct field in block_dev_desc_t when writing interface type in
    dev_print. Error introduced in 574b3195.

    Also added fix from Martin Krause

    Signed-off-by: Tor Krill <tor@excito.com>

commit b64b8a0bd310935b70af69ac970952f2b364ae56
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Tue May 27 10:25:39 2008 +0200

    Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

commit 35ef877f0a8f6232cdef748f442fed5accb2b641
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Thu May 22 18:56:52 2008 -0500

    Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating

    Removed unneeded command line history initialization.  Also, the original
    code would access the 'initted' variable before relocation to SDRAM
    which resulted in erratic behavior since the bss is not initialized when
    executing from flash.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 22f371b63038a4ecab04068877c1089e51a01ba1
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Wed May 21 13:28:30 2008 -0700

    PPC4xx: Simplified post_word_{load, store}

    This patch simplifies post_word_{load,store} by using the preprocessor
    to eliminate redundant, copy-and-pasted code.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>

commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
Date:	Wed May 7 21:25:33 2008 +0400

    cfi_flash: enable M18 flash chips family support.

    Added new command set ID. Buffered write command processing is changed
    in order to support M18 flash chips family.

    Signed-off-by: Alexey Korolev <akorolev@infradead.org>
    Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>

commit 93c56f212ccdadc182018f0769cb284426b88f1d
Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
Date:	Wed May 7 21:24:44 2008 +0400

    cfi_flash: support of long cmd in U-boot.

    Some NOR flash chips needs support of commands with length grether than max
    value size of uchar. For example all M18 family chips use 0x1ff command in
    buffered write mode as value of program loops count.

    Signed-off-by: Alexey Korolev <akorolev@infradead.org>
    Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>

commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
Author: Stefan Roese <sr@denx.de>
Date:	Fri May 16 11:06:06 2008 +0200

    DTT: Issue one-shot command on AD7414 (LM75 code) to read temp

    On AD7414 the first value upon bootup is not read correctly.
    This is most likely because of the 800ms update time of the
    temp register in normal update mode. To get current values
    each time we issue the "dtt" command including upon powerup
    we switch into one-short mode.

    This patch fixes the problem on AD7414 equipped boards (Sequoia,
    Canyonlands etc), that temp value printed in the bootup log was
    incorrect.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri May 30 16:55:06 2008 +0200

    ppc4xx: Cleanup CPCI405 variant's config file

    This patch removes some dead code from CPCI405 board's
    config files. JFFS2 support is also removed. It's not used and
    CPCI4052 does not build anymore without some size reduction.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
Author: Kenneth Johansson <kenneth@southpole.se>
Date:	Thu May 29 16:32:33 2008 +0200

    Remove shell variable UNDEF_SYM.

    UNDEF_SYM is a shell variable in the main Makefile used to force the
    linker to add all u-boot commands to the final image. It has no use here.

    Signed-off-by: Kenneth Johansson <kenneth@southpole.se>

commit 8c66497e06bf803489c589df58ee591d71033274
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 16 11:10:35 2008 +0200

    Add support for environment in SPI flash

    This is pretty incomplete...it doesn't handle reading the environment
    before relocation, it doesn't support redundant environment, and it
    doesn't support embedded environment. But apart from that, it does
    seem to work.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 16 11:10:34 2008 +0200

    SPI Flash: Add "sf" command

    This adds a new command, "sf" which can be used to manipulate SPI
    flash. Currently, initialization, reading, writing and erasing is
    supported.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit d25ce7d24cc0f93881559f4009175ea305af65e8
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 16 11:10:33 2008 +0200

    SPI Flash subsystem

    This adds a new SPI flash subsystem.

    Currently, only AT45 DataFlash in non-power-of-two mode is supported,
    but some preliminary support for other flash types is in place as
    well.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 60445cb5c3eb77ed1a07f2d908eef09174483698
Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Date:	Fri May 16 11:10:32 2008 +0200

    atmel_spi: Driver for the Atmel SPI controller

    This adds a driver for the SPI controller found on most AT91 and AVR32
    chips, implementing the new SPI API.

    Changed in v4:
      - Update to new API
      - Handle zero-length transfers appropriately. The user may send a
	zero-length SPI transfer with SPI_XFER_END set in order to
	deactivate the chip select after a series of transfers with chip
	select active. This is useful e.g. when polling the status
	register of DataFlash.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Fri May 16 11:10:31 2008 +0200

    SPI API improvements

    This patch gets rid of the spi_chipsel table and adds a handful of new
    functions that makes the SPI layer cleaner and more flexible.

    Instead of the spi_chipsel table, each board that wants to use SPI
    gets to implement three hooks:
      * spi_cs_activate(): Activates the chipselect for a given slave
      * spi_cs_deactivate(): Deactivates the chipselect for a given slave
      * spi_cs_is_valid(): Determines if the given bus/chipselect
	combination can be activated.

    Not all drivers may need those extra functions however. If that's the
    case, the board code may just leave them out (assuming they know what
    the driver needs) or rely on the linker to strip them out (assuming
    --gc-sections is being used.)

    To set up communication parameters for a given slave, the driver needs
    to call spi_setup_slave(). This returns a pointer to an opaque
    spi_slave struct which must be passed as a parameter to subsequent SPI
    calls. This struct can be freed by calling spi_free_slave(), but most
    driver probably don't want to do this.

    Before starting one or more SPI transfers, the driver must call
    spi_claim_bus() to gain exclusive access to the SPI bus and initialize
    the hardware. When all transfers are done, the driver must call
    spi_release_bus() to make the bus available to others, and possibly
    shut down the SPI controller hardware.

    spi_xfer() behaves mostly the same as before, but it now takes a
    spi_slave parameter instead of a spi_chipsel function pointer. It also
    got a new parameter, flags, which is used to specify chip select
    behaviour. This may be extended with other flags in the future.

    This patch has been build-tested on all powerpc and arm boards
    involved. I have not tested NIOS since I don't have a toolchain for it
    installed, so I expect some breakage there even though I've tried
    fixing up everything I could find by visual inspection.

    I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
    DataFlash drivers posted as a follow-up. I'd like some help testing
    other boards that use the existing SPI API.

    But most of all, I'd like some comments on the new API. Is this stuff
    usable for everyone? If not, why?

    Changed in v4:
      - Build fixes for various boards, drivers and commands
      - Provide common struct spi_slave definition that can be extended by
	drivers
      - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
      - Make default bus and mode build-time configurable
      - Override default SPI bus ID and mode on mx32ads and imx31_litekit.

    Changed in v3:
      - Add opaque struct spi_slave for controller-specific data associated
	with a slave.
      - Add spi_claim_bus() and spi_release_bus()
      - Add spi_free_slave()
      - spi_setup() is now called spi_setup_slave() and returns a
	struct spi_slave
      - soft_spi now supports four SPI modes (CPOL|CPHA)
      - Add bus parameter to spi_setup_slave()
      - Convert the new i.MX32 SPI driver
      - Convert the new MC13783 RTC driver

    Changed in v2:
      - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
	new API.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
    Tested-by: Guennadi Liakhovetski <lg@denx.de>

commit 289011207d999b2e4085150d2aa30d547ad9b800
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 16 11:10:30 2008 +0200

    Move definition of container_of() to common.h

    AVR32 and AT91SAM9 both have their own identical definitions of
    container_of() taken from the Linux kernel. Move it to common.h so
    that all architectures can use it.

    container_of() is already used by some drivers, and will be used
    extensively by the new and improved SPI API.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 16 11:08:11 2008 +0200

    soft_i2c: Pull SDA high before reading

    Spotted by Dean Capindale.

    Systems that support open-drain GPIO properly are allowed provide an
    empty I2C_TRISTATE define. However, this means that we need to be
    careful not to drive SDA low when the slave is expected to respond.

    This patch adds a missing I2C_SDA(1) to read_byte() required to
    tristate the SDA line on systems that support open-drain GPIO.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
Author: Stefan Roese <sr@denx.de>
Date:	Mon May 19 11:34:53 2008 +0200

    ppc4xx: Remove implementations of testdram()

    This patch removes the used testdram() implementations of the board
    that are maintained by myself.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 17:37:28 2008 +0200

    ppc4xx: Remove superfluous dram_init() call or replace it by initdram()

    Historically the 405 U-Boot port had a dram_init() call in early init
    stage. This function was still called from start.S and most of the time
    coded in assembler. This is not needed anymore (since a long time) and
    boards should implement the common initdram() function in C instead.

    This patch now removed the dram_init() call from start.S and removes the
    empty implementations that are scattered through most of the 405 board
    ports. Some older board ports really implement this dram_init() though.
    These are:

    csb272
    csb472
    ERIC
    EXBITGEN
    W7OLMC
    W7OLMG

    I changed those boards to call this assembler dram_init() function now
    from their board specific initdram() instead. This *should* work, but please
    test again on those platforms. And it is perhaps a good idea that those
    boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
    some time. So further patches welcome here.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 17:22:11 2008 +0200

    ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 39b32be18cd33b53a84065edcd4e465165cc5564
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 17:20:03 2008 +0200

    ppc4xx: Fix common ECC generation code for 440GP style platforms

    This patch makes the common 4xx ECC code really usable on 440GP style
    platforms.

    Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
    compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
    we need to make some processor dependant defines used later on by the
    driver.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ec724f883ee3f3925e6c55027e8ffa70ada83303
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 17:13:55 2008 +0200

    ppc4xx: Change Kilauea to use the common DDR2 init function

    This patch changes the kilauea and kilauea_nand (for NAND booting)
    board port to not use a board specific DDR2 init routine anymore. Now
    the common code from cpu/ppc4xx is used.

    Thanks to Grant Erickson for all his basic work on this 405EX early
    bootup.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 14:59:21 2008 +0200

    ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2

    This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
    ppc4xx related SDRAM/DDR/DDR2 controller defines.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 14:57:41 2008 +0200

    ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1

    This patch removes all SDRAM related defines from the PPC4xx headers
    ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
    the same SDRAM controller as 440 systems do (like 405EX and 440SP).

    It also introduces new defines for the equipped SDRAM controller based on
    which PPC variant is used. There new defines are:

    used on 405GR/CR/EP and some Xilinx Virtex boards.

    used on 440GP/GX/EP/GR.

    used on 440EPx/GRx.

    used on 405EX/r/440SP/SPe/460EX/GT.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jun 2 14:35:44 2008 +0200

    ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S

    This patch consolidates the 405 and 440 parts of the NAND booting code
    selected via CONFIG_NAND_SPL. Now common code is used to initialize the
    SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
    Only *after* running from this location, nand_boot() is called.

    Please note that the initsdram() call is now moved from nand_boot.c
    to start.S. I experienced problems with some boards like Kilauea
    (405EX), which don't have internal SRAM (OCM) and relocation needs to
    be done to SDRAM before the NAND controller can get accessed. When
    initdram() is called later on in nand_boot(), this can lead to problems
    with variables in the bss sections like nand_ecc_pos[].

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Scott Wood <scottwood@freescale.com>

commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Thu May 22 14:44:24 2008 -0700

    ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling

    This patch (Part 2 of 2):

    * Rolls up a suite of changes to enable correct primordial stack and
      global data handling when the data cache is used for such a purpose
      for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).

    * Related to the first, unifies DDR2 SDRAM and ECC initialization by
      eliminating redundant ECC initialization implementations and moving
      redundant SDRAM initialization out of board code into shared 4xx
      code.

    * Enables MCSR visibility on the 405EX(r).

    * Enables the use of the data cache for initial RAM on
      both AMCC's Kilauea and Makalu and removes a redundant
      CFG_POST_MEMORY flag from each board's CONFIG_POST value.

      - Removed, per Stefan Roese's request, defunct memory.c file for
	Makalu and rolled sdram_init from it into makalu.c.

    With respect to the 4xx DDR initialization and ECC unification, there
    is certainly more work that can and should be done (file renaming,
    etc.). However, that can be handled at a later date on a second or
    third pass. As it stands, this patch moves things forward in an
    incremental yet positive way for those platforms that utilize this
    code and the features associated with it.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c821b5f120bedf73867513466412587c6912a8f8
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Thu May 22 14:44:14 2008 -0700

    ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling

    This patch (Part 1 of 2):

    * Rolls up a suite of changes to enable correct primordial stack and
      global data handling when the data cache is used for such a purpose
      for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).

    * Related to the first, unifies DDR2 SDRAM and ECC initialization by
      eliminating redundant ECC initialization implementations and moving
      redundant SDRAM initialization out of board code into shared 4xx
      code.

    * Enables MCSR visibility on the 405EX(r).

    * Enables the use of the data cache for initial RAM on
      both AMCC's Kilauea and Makalu and removes a redundant
      CFG_POST_MEMORY flag from each board's CONFIG_POST value.

      - Removed, per Stefan Roese's request, defunct memory.c file for
	Makalu and rolled sdram_init from it into makalu.c.

    With respect to the 4xx DDR initialization and ECC unification, there
    is certainly more work that can and should be done (file renaming,
    etc.). However, that can be handled at a later date on a second or
    third pass. As it stands, this patch moves things forward in an
    incremental yet positive way for those platforms that utilize this
    code and the features associated with it.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit a439680019e06171d4a5694b7992accce87f590e
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Wed May 21 13:28:30 2008 -0700

    PPC4xx: Simplified post_word_{load, store}

    This patch simplifies post_word_{load,store} by using the preprocessor
    to eliminate redundant, copy-and-pasted code.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>

commit f979690ee337450b2030aba128f95b7a8d9881c0
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu May 15 15:13:08 2008 -0500

    Fix warnings from gcc-4.3.0 build on a ppc host

    * The cfi_flash.c memset fix actual allows the board to boot so there is
      a bit more going on here than just resolving warnings associated with
      uninitialized variables.

    * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
      inline function 'ext2_find_next_zero_bit' which is not static

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Wed May 14 13:09:51 2008 -0500

    MPC512x: Change traps.c to not reference non-addressable memory

    Currently, END_OF_RAM is used by the trap code to determine if
    we should attempt to access the stack pointer or not. However,
    on systems with a lot of RAM, only a subset of the RAM is
    guaranteed to be mapped in and accessible.	Change END_OF_RAM
    to use get_effective_memsize() instead of using the raw ram
    size out of the bd.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 81673e9ae14b771cd13faf19947192599cae3959
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue May 13 19:01:54 2008 -0500

    Make sure common.h is the first include.

    If common.h isn't first we can get CONFIG_ options defined in the
    board config file ignored.	This can cause an issue if any of those
    config options impact the size of types of data structures
    (eg CONFIG_PHYS_64BIT).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Tue May 13 15:53:29 2008 +0200

    Avoid initrd and logbuffer area overlaps

    Add logbuffer to reserved LMB areas to prevent initrd allocation
    from overlaping with it.

    Make sure to use correct logbuffer base address.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 6956d53d9934862507f83f0e3255dfd4662e7482
Author: Sascha Laue <sascha.laue@liebherr.com>
Date:	Tue May 13 13:29:54 2008 +0200

    lwmon5: add memory-pattern-test to FPGA POST.

commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu May 8 19:02:51 2008 -0500

    PPC: 86xx Add bat registers to reginfo command

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Fri May 9 15:41:35 2008 -0500

    PPC: Add print_bats() to lib_ppc/bat_rw.c

    This function prints the values of all the BAT register
    pairs - I needed this for debug earlier this week; adding it to
    lib_ppc so others can use it (and add it to reginfo commands
    if so desired).

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit c148f24c15743a02e855636e6bed013bd121f7f2
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu May 15 21:29:04 2008 -0500

    PPC: Change lib_ppc/bat_rw.c to use high bats

    Currently, this code only deals with BATs 0-3, which makes
    it useless on systems that support BATs 4-7.  Add the
    support for these registers.

    Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>

commit 31d826722434931e1152a09d140187dcf72f8aac
Author: Becky Bruce <becky.bruce@freescale.com>
Date:	Thu May 8 19:02:12 2008 -0500

    PPC: Create and use CONFIG_HIGH_BATS

    Change all code that conditionally operates on high bat
    registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
    instead of the myriad ways this is done now.  Define the option
    for every config for which high bats are supported (and
    enabled by early boot, on parts where they're not always
    enabled)

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit aa3b8bf9c30065bb2ea852799d32db5020598495
Author: Wolfgang Grandegger <wg@grandegger.com>
Date:	Wed May 28 19:55:19 2008 +0200

    E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter

    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed May 28 13:06:25 2008 -0500

    ColdFire: Add 10 base ethernet support for mcf5445x

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
Author: Jason McMullan <mcmullan@netapp.com>
Date:	Fri May 30 00:53:38 2008 +0900

    mips: Add an 'include/asm/errno.h', like all other architectures

    All other u-boot architectures have an include/asm/errno.h, so
    this change adds it to the mips include/asm-mips headers also.

    Stolen from Linux 2.6.25.

    Signed-off-by: Jason McMullan <mcmullan@netapp.com>

commit e2ad8426624bac457acc6925b6ff408e9bf20466
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Fri May 30 00:53:38 2008 +0900

    [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Fri May 30 00:53:38 2008 +0900

    [MIPS] <asm/mipsregs.h>: Update register / bit field definitions

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit bf462ae450a7f2eeeddc699ed345b391e3263540
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Fri May 30 00:53:37 2008 +0900

    [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups

    No functional changes.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 89a1550ec6b74452274a7a23127936e2c7eec711
Author: Jason McMullan <mcmullan@netapp.com>
Date:	Fri May 30 00:53:37 2008 +0900

    mips: If CONFIG_CMD_SPI is defined, call spi_init()

    The mips architecture currently does not call 'spi_init()' in the generic
    board initialization routine is CONFIG_CMD_SPI is defined.

    This patch rectifies that problem.

    Signed-off-by: Jason McMullan <mcmullan@netapp.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
Author: Jason McMullan <mcmullan@netapp.com>
Date:	Fri May 30 00:53:37 2008 +0900

    [MIPS] lib_mips/board.c: Add nand_init

    This patch adds the standard 'nand_init()' call to the mips generic
    'board_init_r()' call, bringing MIPS in line with the other architectures.

    Signed-off-by: Jason McMullan <mcmullan@netapp.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit d6ac2ed893c2168738aee01579d6283af8d37045
Author: Scott Wood <scottwood@freescale.com>
Date:	Thu May 22 10:49:46 2008 -0500

    Remove prototypes of nand_init() in favor of including nand.h.

    Likewise with onenand_init().

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
Author: Scott Wood <scottwood@freescale.com>
Date:	Thu May 22 10:49:00 2008 -0500

    Make onenand_uboot.h self-sufficient.

    Don't assume types are provided by previously included headers.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
Author: Dirk Behme <dirk.behme@gmail.com>
Date:	Wed Jan 16 14:26:59 2008 +0100

    nand: Correct NAND erase percentage output

    For NAND erase sizes smaller than one NAND erase block, erase
    percentage output becomes grater than 100% e.g.

    -- cut --
      > nand info
    Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
      > nand erase 0x100000 0x2000
    NAND erase: device 0 offset 0x100000, size 0x2000
    Erasing at 0x100000 -- 200% complete.
    OK
      >
    -- cut --

    Correct this and give user a warning that more is erased than specified:

    -- cut --
      > nand erase 0x100000 0x2000
    NAND erase: device 0 offset 0x100000, size 0x2000
    Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
	       Erasing 0x00004000 instead
    Erasing at 0x100000 -- 100% complete.
    OK
      >
    -- cut --

    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>

commit 5922db6c0948506be91e0de44e7a6863a18a417f
Author: Stelian Pop <stelian@popies.net>
Date:	Tue May 13 17:31:24 2008 +0200

    Cleanup nand_info[] declaration.

    The nand_info array is declared as extern in several .c files.
    Those days, nand.h contains a reference to the array, so there is
    no need to declare it elsewhere.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
Author: Scott Wood <scottwood@freescale.com>
Date:	Mon May 19 09:30:43 2008 -0500

    NAND: Provide a sane default for NAND_MAX_CHIPS.

    This allows the header to be included regardless of whether a board's
    config file provides NAND-related defininitions.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon May 26 12:19:10 2008 +0200

    avr32: Fix theoretical race in udelay()

    If the specified delay is very short, the cycle counter may go past the
    "end" time we are waiting for before we get around to reading it.

    Fix it by checking the different between the cycle count "now" and the
    cycle count at the beginning. This will work as long as the delay
    measured in number of cycles is below 2^31.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed May 21 13:01:09 2008 +0200

    avr32: Compile atmel_mci.o conditionally

    Remove #ifdef CONFIG_MMC from the source file and use conditional
    compilation in the Makefile instead.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu May 22 12:28:25 2008 +0200

    avr32: Fix wrong error flags in atmel_mci driver

    Make sure we check for CRC errors when sending commands that use CRC
    checking.

    Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed May 21 11:10:59 2008 +0200

    avr32: Fix two warnings in atmel_mci.c

    The warnings are harmless but annoying. Let's fix them.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon May 19 11:36:28 2008 +0200

    avr32: Rework SDRAM initialization code

    This cleans up the SDRAM initialization and related code a bit, and
    allows faster booting.

      * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
      * Remove memory test from sdram_init() and make caller responsible
	for verifying the SDRAM and determining its size.
      * Remove base_address member from struct sdram_config (was sdram_info)
      * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
      * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 95107b7c028806919630bf02c653aa8f4f867c94
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Mon May 19 11:27:37 2008 +0200

    avr32: Do stricter stack checking in the exception handler

    Don't do a stack dump if the stack pointer is outside the memory area
    reserved for stack.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 2 15:32:57 2008 +0200

    avr32: Use the same entry point for reset and exception handling

    Since the reset vector is always aligned to a very large boundary, we
    can save a couple of KB worth of alignment padding by placing the
    exception vectors at the same address.

    Deciding which one it is is easy: If we're handling an exception, the
    CPU is in Exception mode. If we're starting up after reset, the CPU is
    in Supervisor mode. So this adds a very minimal overhead to the reset
    path (only executed once) and the exception handling path (normally
    never executed at all.)

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 0c16eed2189a190bd5655b33c029f809a9b31128
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 2 15:24:22 2008 +0200

    avr32: Put memset in its own section

    All C code is compiled with -ffunction-sections -fdata-sections.
    Assembly functions should get their own sections as well so that
    everything looks consistent.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Fri May 2 15:21:40 2008 +0200

    avr32: Rename pm_init() as clk_init() and make SoC-specific

    pm_init() was always more about clock initialization than anything
    else. Dealing with PLLs, clock gating and such is also inherently
    SoC-specific, so move it into a SoC-specific directory.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Apr 30 16:15:57 2008 +0200

    avr32: Use new-style Makefile for the at32ap platform

    This makes it easier to avoid compiling certain files later.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Apr 30 14:36:47 2008 +0200

    avr32: Remove unused file cpu/at32ap/pm.c

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Apr 30 14:19:28 2008 +0200

    avr32: Clean up the HMATRIX code

    Rework the HMATRIX configuration interface so that it becomes easier
    to configure the HMATRIX for boards with special needs, and add new
    parts.

    The HMATRIX header file has been split into a general,
    chip-independent part with register definitions, etc. and a
    chip-specific part with SFR bitfield definitions and master/slave
    identifiers.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 0a2e48792dd372c90b80059f3235e67a567e16fc
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu Nov 22 12:14:11 2007 +0100

    avr32: Add support for the ATSTK1006 board

    This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
    board. It's currently in production and will be available soon.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Tue Apr 29 12:53:05 2008 +0200

    avr32: Get rid of the .flashprog section

    The .flashprog section was only needed back when we were running
    directly from flash, and it's even more useless on NGW100 since it
    uses the CFI flash driver which never used this workaround in the
    first place.

    Remove it on STK1000 as well, and get rid of all the associated code and
    annotations.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit cdd42c0c7a5205fc380912d83229069a71ea3abf
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Wed Apr 30 13:09:56 2008 +0200

    avr32: Use correct condition around macb clock accessors

    get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
    the chip has a MACB controller, not when it has a USART.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit f793a3581901ff39c2abb94012d9bbc8573ccf02
Author: David Brownell <david-b@pacbell.net>
Date:	Wed Apr 16 22:57:58 2008 -0700

    avr32: Disable the AP7000 internal watchdog on startup

    This patch forces the watchdog off in all cases.  That will at least
    get rid of the constant reboot cycle, though it won't let the watchdog
    actually run in the new kernels:  its probe() comes up with a polite
    warning.

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 55ac7a7490b55da56659f95d82a0c83b9756df27
Author: David Brownell <david-b@pacbell.net>
Date:	Fri Feb 22 12:54:39 2008 -0800

    avr32: stk1002 and ngw100 convergence

    Make STK1002 and NGW100 boards act more alike:
      - STK boards can use as many arguments as NGW
      - STK boards don't need to manage FPGAs either
      - NGW commands should match STK ones

    Also spell U-Boot right in prompts for STK1002 and NGW100.

    Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
    [haavard.skinnemoen@atmel.com: update STK100[34] as well]
    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue May 27 13:47:00 2008 +0200

    Socrates: Fix PCI bus frequency report

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue May 27 11:49:13 2008 +0200

    Socrates: Added USB support.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 5a904e5637cff1d708dc67098004f83ba9e84c54
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue May 27 11:35:02 2008 +0200

    USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO

    In case of several PCI USB controllers on a board this variable
    specifys which controller to use.
    See doc/README.generic_usb_ohci for details.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue May 27 10:36:07 2008 +0200

    Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 83e9d7a2614d4006b92690afa3390c291734267e
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Mon May 26 18:16:04 2008 +0200

    Socrates: Config file cleanup.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 602cac1389b755b223272f2328a47e6f8c240848
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat May 24 12:47:46 2008 +0200

    MAKEALL: add at91 list

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
Author: Ron Madrid <ron_madrid@sbcglobal.net>
Date:	Fri May 23 15:37:05 2008 -0700

    Add Marvell 88E1118 support for TSEC

    Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 557b377d8bfc8b833b6e749457bcdfa298331a24
Author: Jens Gehrlein <sew_s@tqs.de>
Date:	Mon May 5 14:06:11 2008 +0200

    smc911x: add 16 bit support

    Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
Author: Christian Eggers <ceggers@gmx.de>
Date:	Wed May 21 21:29:10 2008 +0200

    Fix endianess conversion in usb_ohci.c

    Sorry, I forgot this line:

    Signed-off-by: Christian Eggers <ceggers@gmx.de>

    I think this must be swapped (result may be equal).

commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
Author: Christian Eggers <ceggers@gmx.de>
Date:	Wed May 21 22:12:00 2008 +0200

    USB: replace old swap_ with proper endianess conversion macros

    Signed-off-by: Christian Eggers <ceggers@gmx.de>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
Author: Christian Eggers <ceggers@gmx.de>
Date:	Wed May 21 21:29:10 2008 +0200

    Fix endianess conversion in usb_ohci.c

    Signed-off-by: Christian Eggers <ceggers@gmx.de>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 477434c63c2ea5baa5c6c4e43500786f436511ff
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Thu May 22 01:15:53 2008 +0200

    USB: add support for multiple PCI OHCI controllers

    Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
    In case of several PCI USB controllers on a board this variable
    specifys which controller to use.

    Also add USB support for sokrates board.

    See doc/README.generic_usb_ohci for details.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed May 21 16:56:08 2008 +0200

    Fix some whitespace issues

    introduced by 53677ef18 "Big white-space cleanup."

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4416603aeb06861b468b06a981e52c3ff805db7b
Author: York Sun <yorksun@freescale.com>
Date:	Mon May 12 14:36:39 2008 -0500

    Make ads5121 out-of-tree compiling safe

    Reuse the existing DIU driver in board/freescale/common.

    Signed-off-by: York Sun <yorksun@freescale.com>

commit 0e1bad47cd345c76c91a64caf41011e431b62599
Author: York Sun <yorksun@freescale.com>
Date:	Mon May 5 10:20:01 2008 -0500

    Adding DIU support for Freescale 5121ADS

    Add DIU and cfb console support to FSL 5121ADS board.

    Use #define CONFIG_VIDEO in config file to enable fb console.

    Signed-off-by: York Sun <yorksun@freescale.com>

commit a48ff68d235e671176f6b496c44246dbe5e0a93f
Author: York Sun <yorksun@freescale.com>
Date:	Mon May 5 10:20:00 2008 -0500

    Replace DPRINTF with debug

    Remove DPRINTF macro and replace it with generic debug macro.

    Signed-off-by: York Sun <yorksun@freescale.com>

commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
Author: York Sun <yorksun@freescale.com>
Date:	Mon May 5 10:19:59 2008 -0500

    Move pixel clock setting to board file

    The clock divider has different format in 5121 and 8610. This patch moves it to
    board specific code.

    Signed-off-by: York Sun <yorksun@freescale.com>

commit 53677ef18e25c97ac613349087c5cb33ae5a2741
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue May 20 16:00:29 2008 +0200

    Big white-space cleanup.

    This commit gets rid of a huge amount of silly white-space issues.
    Especially, all sequences of SPACEs followed by TAB characters get
    removed (unless they appear in print statements).

    Also remove all embedded "vim:" and "vi:" statements which hide
    indentation problems.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Thu May 8 17:46:23 2008 +0200

    socrates: fix second TSEC configuration (it is actually TSEC3)

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Thu May 8 14:17:08 2008 +0200

    Fixed reset for socrates

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit e18575d5f589a62e19c70d471d4b4e27cad3af56
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Wed May 7 15:10:49 2008 +0200

    socrates: changes to support FDT

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Wed Apr 30 11:42:50 2008 +0200

    Initial support for "Socrates" board

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:46:42 2008 +0200

    POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.

    This way we become able to utilize the full post_log_word for POST
    activities (overwise, POST ECC, which has 0x8000 ID, could be
    erroneously treated as started in post_output_backlog() even if there
    was actually no POST ECC run (because of OCM POST failure, for
    example).

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 7845d49094c81321021b50a4dbb8864d2f3777e4
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:46:02 2008 +0200

    POST: mark OCM test as POST_STOP

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 28a385065882d6cb6ac5f443311ff87887ed7c13
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:45:26 2008 +0200

    POST: add POST_STOP flag

    Don't run futher tests in case of a test fails that is marked as
    POST_STOP.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit a525145d8110d15b4389d23c3ea8a78f22509d3f
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:44:16 2008 +0200

    POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)

    Switch the OCM testid with the codec one. The reason is that current
    implementation requires the POST_ROM testid to fit into lower 16
    bits, and the codec test will never run with POST_ROM hopefully.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:43:28 2008 +0200

    lwmon5: enable OCM post test on lwmon5 board

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 6e8ec682268493b8d098f99e17b1ce71b4448977
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:42:47 2008 +0200

    POST: OCM test added.

    Added OCM test to POST layer. This version runs before all other tests
    but doesn't yet interrupt post sequence on failure.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 6891260bdd935a382c95d9fa333922b0dfded68a
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu May 8 15:40:39 2008 +0200

    POST: typo fix

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 727f63334676e760877d43bfb8f0e9331ac8b101
Author: Hebbar <gururajakr@sanyo.co.in>
Date:	Tue May 20 02:16:36 2008 -0700

    common/usb.c: fix incorrect escape sequence

    Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>

commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
Author: York Sun <yorksun@freescale.com>
Date:	Thu May 15 15:26:27 2008 -0500

    Fix 8313ERDB board configuration

    Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
    Correct TSEC1 vs TSEC2 assignment.
    Define ETHADDR and ETH1ADDR always.

    Signed-off-by: York Sun <yorksun@freescale.com>
    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 2c289e320dcfb3760e99cf1d765cb067194a1202
Author: Jon Loeliger <jdl@freescale.com>
Date:	Mon May 19 09:47:25 2008 -0500

    mpc86xx: Removed unused and unconfigured memory test code.

    Besides, other common code exists.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 180a90abdae72587c0f679edf8991455e559440d
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon May 19 12:47:11 2008 +0200

    Release v1.3.3

    Update CHANGELOG for release.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 16bedc661de0dae767b1377d8413373a3fbcfa79
Author: Stefan Roese <sr@denx.de>
Date:	Mon May 19 07:14:38 2008 +0200

    ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection

    When SATA is selected (via jumper J6) we need to disable the first PCIe
    node in the device tree, so that Linux doesn't initialize it. Otherwise
    the Linux SATA driver will fail to detect the devices.

    The same goes the other way around too. So if PCIe is selected we need
    to disable the SATA node in the device tree.

    This is because PCIe port 0 and SATA on 460EX share the same pins
    (multiplexed) and we have to configure in U-Boot which peripheral is
    enabled.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3cc27b426aeefe2930f911692e9df3143fb2565f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:58 2008 +0200

    i386: Fix multiple definitions of __show_boot_progress

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 311f3446930c1e64c12026c1cfd00500b05be52d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:57 2008 +0200

    sc530_spunk: add missing SOBJS entry

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit a559317143b4f95927b08cd388707e6f077e95fa
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:56 2008 +0200

    sc520_spunk: Fix flash

    flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
    flash.c:398: error: label at end of compound statement

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 91f221317af64191ee8caf303ea9305943158691
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:49 2008 +0200

    drivers/pcmcia: add missing i82365

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit dd223944132f97ffa52977ea95e5a52428f5cc2f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:47 2008 +0200

    i386/bootm: remove unused var

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 18 19:09:45 2008 +0200

    example/gitignore: update with all generated examples

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit a38dc3ea8614f8b0c41e432b445a9959b9711295
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu May 15 00:42:45 2008 +0200

    TQM8272: fix out-of-tree building

    ...and add to MAKEALL script

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed May 14 23:34:53 2008 +0200

    environment: fix bug introduced by commit a8409f4f1ac8

    env_get_char is not a function, but a pointer to one.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
Author: Gary Jennejohn <garyj@denx.de>
Date:	Wed May 14 13:39:22 2008 +0200

    ppc4xx: QUAD100HD: Allow the environment to be put into flash.

    After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect.  Also
    use a redundant environment.

    Signed-off-by: Gary Jennejohn <garyj@denx.de>

commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed May 14 13:55:30 2008 +0200

    Fix config files for out-of-tree building

    Several board/<...>/config.mk files include dynamically built (by
    the Makefile) config files but used the wrong file name of
	$(TOPDIR)/board/$(BOARDDIR)/config.tmp
    instead if the correct
	$(OBJTREE)/board/$(BOARDDIR)/config.tmp

    The bug is nasty because the build result is correct for the (normal)
    in-tree builds, and because 'sinclude' is used no errors get raised
    even for out-of-tree build tests. But out-of-tree builds use an
    incomplete and thus usually incorrect configuration...

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
Author: Stefan Roese <sr@denx.de>
Date:	Wed May 14 13:40:03 2008 +0200

    ppc4xx: Fix bogus Canyonlands config.mk

    This patch fixes the canyonlands config.mk file to enable correct
    out-of-tree builds. Thanks to Wolfgang Denk for spotting this.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit fdd1247a66d788a3446244f6fde9955a93c26322
Author: Stefan Roese <sr@denx.de>
Date:	Wed May 14 10:32:32 2008 +0200

    ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build

    Canyonlands has a file ddr2_fixed.c which needs special treatment when
    building in separate directory. It has to be linked to build directory
    otherwise it is not seen.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a8409f4f1ac84c36273c1a1e341189662521bcfb
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed May 14 12:22:49 2008 +0200

    environment: cleanup prototype declarations of env functions.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit cf39b07948015c480b72a6e732cf7d839aa93a9e
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed May 14 12:21:48 2008 +0200

    linkstation_HGLAN: Fix out of tree building.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 085551c05ca09e6c491ea11a1c6727a36776a545
Author: Stefan Roese <sr@denx.de>
Date:	Wed May 14 10:32:32 2008 +0200

    ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build

    Canyonlands has a file ddr2_fixed.c which needs special treatment when
    building in separate directory. It has to be linked to build directory
    otherwise it is not seen.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1510b82d50615f344e89d42533e8224cce067dc0
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue May 13 23:15:52 2008 +0200

    Makefile: fix "error: version_autogenerated.h: No such file or directory"

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
Author: Stelian Pop <stelian@popies.net>
Date:	Tue May 13 17:31:24 2008 +0200

    Cleanup nand_info[] declaration.

    The nand_info array is declared as extern in several .c files.
    Those days, nand.h contains a reference to the array, so there is
    no need to declare it elsewhere.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 70fab1908fc1734a403711eaabbef546bc4b77dc
Author: Stefan Roese <sr@denx.de>
Date:	Tue May 13 20:22:01 2008 +0200

    ppc4xx: Add 405EX(r) revision C PVR definitions and detection code

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon May 12 01:11:21 2008 +0200

    Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"

    This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
    which broke many PowerPC boards.

commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon May 12 00:56:28 2008 +0200

    Revert "Avoid initrd and logbuffer area overlaps"

    This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
    which breaks building on all PPC boards that don't use a log buffer.

commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
Author: Nick Spence <nick.spence@freescale.com>
Date:	Sat May 10 14:02:04 2008 -0700

    Fix offset calculation for multi-type legacy images.

    Calculation of tail was incorrect when size % 4 == 0.

    New code removes the conditional and does the same thing but with arithmetic

    Signed-off-by: Nick Spence <nick.spence@freescale.com>

commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon May 12 00:40:58 2008 +0200

    Revert "Change env_get_char from a global function ptr to a function."

    This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
    which is known to break booting from dataflash and NAND.

commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 11 23:13:57 2008 +0200

    API: remove duplicate syscall check

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 67e3beb52c320b0a31cf030716c99392cde2d532
Author: Stelian Pop <stelian@popies.net>
Date:	Fri May 9 21:46:51 2008 +0200

    AT91: Cleanup unused config header file definitions.

    CONFIG_ENV_OVERWRITE is commented out in the config header files,
    so let's cleanup the files by removing the whole definition.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 14:52:34 2008 +0200

    Support AT91CAP9 revC CPUs

    The AT91CAP9 revC CPU has a few differences over the previous,
    revB CPU which was distributed in small quantities only (revA was
    an internal Atmel product only).

    The revC silicon needs a special initialisation sequence to
    switch from the internal (imprecise) RC oscillator to the
    external 32k clock.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 098b7b4b441b12c2a64dd517930f43c793542759
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 14:52:33 2008 +0200

    Use custom logo for Atmel boards

    This patch adds a custom vendor logo for the Atmel AT91 boards.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 761c70b80cdd3bead40146b96a8e713d6ae01632
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 14:52:32 2008 +0200

    AT91SAM9RLEK: hook up the ATMEL LCD driver

    This patch makes the necessary adaptations (PIO configurations and
    defines in config header file) to hook up the Atmel LCD driver to the
    AT91SAM9RLEK board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 14:52:31 2008 +0200

    AT91SAM9263EK: hook up the ATMEL LCD driver

    This patch makes the necessary adaptations (PIO configurations and
    defines in config header file) to hook up the Atmel LCD driver to the
    AT91SAM9263EK board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 820f2a958325061a446115f3035e48e4726b3390
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 14:52:30 2008 +0200

    AT91SAM9261EK: hook up the ATMEL LCD driver

    This patch makes the necessary adaptations (PIO configurations and
    defines in config header file) to hook up the Atmel LCD driver to the
    AT91SAM9261EK board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 14:52:29 2008 +0200

    AT91CAP9ADK: hook up the ATMEL LCD driver

    This patch makes the necessary adaptations (PIO configurations and
    defines in config header file) to hook up the Atmel LCD driver to the
    AT91CAP9ADK board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
Author: Stelian Pop <stelian@popies.net>
Date:	Fri May 9 21:57:18 2008 +0200

    Add ATMEL LCD driver

    This patch adds support for the ATMEL LCDC driver which is used on some
    AT91 and AVR platforms.

    Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
    AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 18:52:25 2008 +0200

    AT91SAM9RLEK support

    This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
    board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8e429b3eee23927c1222679f6b6f53667b21595c
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 18:52:23 2008 +0200

    AT91SAM9263EK support

    This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
    board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:22 2008 +0200

    AT91SAM9261EK support

    This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
    board.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 86c8c8a414988c50104a3b02c29f50af2be738c0
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:21 2008 +0200

    AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND

    This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
    in order to cope with the changes in DataFlash partitionning scheme
    (cset c3a60cb3).

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 96996ac25d5222611a8888968db6e53a6d3726da
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:20 2008 +0200

    AT91SAM9260EK: Normalize BOOTARGS

    This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
    DataFlash or from NAND), and gives to Linux a fully specified mtdparts
    variable.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:19 2008 +0200

    AT91SAM9260EK: Normalize SPI timings

    This patch changes the SPI timings to closely match the ones
    used by the Linux kernel and the Atmel's own bootstrap project.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:18 2008 +0200

    AT91SAM9260EK: Handle 8 or 16 bit NAND

    The Atmel boards can handle 8 or 16 bit NAND memories. This patch
    makes the support configurable in the board config header file
    (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit ab52640fc01624e208424e527af0b7b3a5a65a12
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:17 2008 +0200

    AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND

    This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
    in order to cope with the changes in DataFlash partitionning scheme
    (cset c3a60cb3).

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:16 2008 +0200

    AT91CAP9ADK: Normalize BOOTARGS

    This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
    DataFlash or from NAND), and gives to Linux a fully specified mtdparts
    variable.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 93da48b910511911ce110656e17ed733c8ac4c45
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:15 2008 +0200

    AT91CAP9ADK: Normalize SPI timings

    This patch changes the SPI timings to closely match the ones
    used by the Linux kernel and the Atmel's own bootstrap project.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:14 2008 +0200

    AT91CAP9ADK: Handle 8 or 16 bit NAND

    The Atmel boards can handle 8 or 16 bit NAND memories. This patch
    makes the support configurable in the board config header file
    (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:13 2008 +0200

    Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms

    All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
    below avoids the duplication of u-boot.lds by putting the file in the
    cpu directory instead of the board one.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:12 2008 +0200

    Add proper copyright notices in Atmel boards Makefiles

    The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
    copyright notice. This patch adds the missing pieces.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit e817a042cef6164bf26fee86f90326f2ec9e6745
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:11 2008 +0200

    Add copyright information in Atmel boards partition.c

    When Ulf did the dataflash.c cleanup, he didn't add his copyright on
    the new created files. This patch fixes the problem.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 20:52:10 2008 +0200

    Update origin and copyright information in arch-at91sam9 header files

    When doing the AT91CAP9/AT91SAM9 port, a number of header files were
    copied from the Linux kernel sources. This patch explicitly specifies
    this origin for all the copied headers, and for those missing copyright
    information, adds it.

    Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
    in the latest kernel sources by 'at91sam9_smc.h'.

    The copyright information has been confirmed by the AT91 Linux kernel
    maintainer, Andrew Victor <avictor.za@gmail.com>.

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 79dd1712689d6a5031d7cbff54957049680751c7
Author: Markus Klotzbücher <mk@denx.de>
Date:	Thu May 8 16:00:55 2008 +0200

    ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config

    When using dhcp/bootp the "netmask" environment variable is not set
    because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
    desireable, so the following patch adds this this option to the board
    config.

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 869d14b4cc2e47de2ddcb117bad0407a44436684
Author: Stefan Roese <sr@denx.de>
Date:	Sat May 10 10:30:36 2008 +0200

    ppc4xx: Update Makalu defconfig to use device-tree booting as default

    This patch reworks the default environment on Makalu. Now "net_nfs" for
    example uses the device-tree style booting formerly know as "net_nfs_fdt".
    Also the addresses in RAM were changed because of the new image booting
    support, which check for image overwriting. So the addresses needed to
    get adjusted.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f3612a7b199cab3942f60d9c1392eb39d58cc699
Author: Becky Bruce <bgill@freescale.com>
Date:	Wed May 7 13:28:16 2008 -0500

    PPC: fix map_physmem build warning

    map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
    enabled.  This quiets the warning.

    Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>

commit 36f32675f40292002ee1fed252c180a43022d2d4
Author: Becky Bruce <bgill@freescale.com>
Date:	Wed May 7 13:24:57 2008 -0500

    Update pci code to use phys_addr_t

    Physical addrs need to be represented by phys_addr_t, not
    unsigned long.  Otherwise, systems that use CONFIG_PHYS_64BIT
    are going to fail mightily.

    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
Author: Nick Spence <nick.spence@freescale.com>
Date:	Thu May 8 22:32:22 2008 -0700

    Support legacy multi-type images without FDT section.

    This patch enables legacy multi-type images containing only a Linux kernel
    and root file system to be loaded, maintaining compatibility with previous
    versions of u-boot.

    This is required when using old image files such as a Linux 2.4 kernel /
    filesystem.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Acked-by: Bartlomiej Sieka <tur@semihalf.com>

commit 881031d9732783b7aeae2198fc7eb480ae8974a6
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat May 10 00:38:02 2008 +0200

    Update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat May 10 00:36:09 2008 +0200

    post/cpu/ppc4xx/Makefile: line length cleanup

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 22:52:09 2008 +0200

    Fix @ -> <at> substitution

    When applying the AT91CAP9 patches upstream, something transformed
    the '@' character into the ' <at> ' sequence.

    The patch below restores the original form in all the places where
    it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
    were copied from AT91CAP9, and a couple of other files where the
    ' <at> ' sequence was present).

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 22:52:10 2008 +0200

    Update origin and copyright information in arch-at91sam9 header files

    When doing the AT91CAP9/AT91SAM9 port, a number of header files were
    copied from the Linux kernel sources. This patch explicitly specifies
    this origin for all the copied headers, and for those missing copyright
    information, adds it.

    Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
    in the latest kernel sources by 'at91sam9_smc.h'.

    The copyright information has been confirmed by the AT91 Linux kernel
    maintainer, Andrew Victor <avictor.za@gmail.com>.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 22:52:11 2008 +0200

    Add copyright information in Atmel boards partition.c

    When Ulf did the dataflash.c cleanup, he didn't add his copyright on
    the new created files. This patch fixes the problem.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu May 8 10:09:27 2008 +0200

    mx31ads: fix 32kHz clock handling

    According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
    oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
    Also fix a typo when verifying a jumper configuration. While at it, make
    two needlessly global functions static.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed May 7 13:10:04 2008 +0200

    Avoid initrd and logbuffer area overlaps

    Add logbuffer to reserved LMB areas to prevent initrd allocation
    from overlaping with it.

    Make sure to use correct logbuffer base address.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed May 7 13:08:54 2008 +0200

    ppc: Cleanup get_effective_memsize() use

    Removed duplicated effective memory size calculation code.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 273c37d843d5b581090378016cd12dd9c586907b
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed May 7 09:03:53 2008 +0200

    Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled

    Recent modifcations to LOGBUFFER handling code were incorrecly
    introduced to fit_check_kernel() routine during
    "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
    commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.

    This patch cleans up this merge issue.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit bc11756daff89a3de09ca80adac962b88cf06e6e
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Tue May 6 20:16:15 2008 -0700

    Propagate Error Status to the Shell on fw_printenv Errors

    Changed implementation such that fw_printenv returns failure status
    when one or more specified variables do not exist or when incorrect
    command syntax is used.

    This aids scripting fw_printenv such that the script can key of the
    return status rather than relying on standard error "scraping".

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Tue May 6 16:18:00 2008 -0700

    Fix Compilation Errors with 'tools/env/fw_printenv'

    In the current top-of-tree, 1.3.3.-rc2, the optional tool
    'tools/env/fw_printenv' fails to compile for two reasons:

    1) The header watchdog.h cannot be found.
    2) The header zlib.h is picked up from the tool chain rather than the
       project causing a prototype conflict for crc32.

    This patch addresses both of these issues.

    Platforms Tested On:
    - AMCC "Kilauea"

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>

commit 597f6c26a18b389903a64692bacbf9a1ca69355b
Author: James Yang <James.Yang@freescale.com>
Date:	Mon May 5 10:22:53 2008 -0500

    Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating

    When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
    work before relocating to RAM because command history is written into
    a global array that is not writable before relocation.  This patch
    defers to the no-editing and no-history code in readline_into_buffer()
    if it is called before relocation.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 726c0f1e5f108dccea052965123b95837d2bd402
Author: Detlev Zundel <dzu@denx.de>
Date:	Mon May 5 16:11:22 2008 +0200

    cosmetic: Adjust coding style for switch statements to be consistent

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 574b319512b13e10800f0045e39b993f4ca25e42
Author: Detlev Zundel <dzu@denx.de>
Date:	Mon May 5 16:11:21 2008 +0200

    Fix disk type output in disk/part.c

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
Author: Vlad Lungu <vlad.lungu@windriver.com>
Date:	Mon May 5 14:20:03 2008 +0300

    Mail address change, documentation modified

    Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>

commit 4d49b28038e2819088e8356a77212fc95a89ce5a
Author: Michal Simek <monstr@monstr.eu>
Date:	Sun May 4 15:42:41 2008 +0200

    microblaze: Repare intc handling

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun May 4 15:17:52 2008 +0200

    include/gitignore: update to all architectures

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1df368aed3b8bc240fe1595d290b0e91b22961da
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Mon May 5 02:12:06 2008 +0200

    ide: Remove spurious second include of io.h

    Removed the second include, with all the #ifdef around as suggested by Wolfgang.

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
Author: Adrian Filipi <adrian.filipi@eurotech.com>
Date:	Tue May 6 16:46:37 2008 -0400

    Fix some typos

    This patch fixes three typos.
    The first is a repetition of CONFIG_CMD_BSP.
    The second makes the #endif comment match its #if.
    The third is a spelling error.

    Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>

commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
Author: Grant Erickson <gerickson@nuovations.com>
Date:	Sun May 4 16:45:01 2008 -0700

    Recognize 'powerpc' As an Alias for IH_ARCH_PPC

    Add support for the recognition of 'powerpc' as an alias for the PowerPC
    architecture type since Linux is already trending in that direction,
    preferring 'powerpc' to 'ppc'.

    Signed-off-by: Grant Erickson <gerickson@nuovations.com>

commit f5a24259190c388c2527bdc49fee34577d862cc7
Author: Wheatley Travis <Travis.Wheatley@freescale.com>
Date:	Fri May 2 13:35:15 2008 -0700

    7450 and 86xx L2 cache invalidate bug corrections

    The 7610 and related parts have an L2IP bit in the L2CR that is
    monitored to signal when the L2 cache invalidate is complete whereas the
    7450 and related parts utilize L2I for this purpose. However, the
    current code does not account for this difference. Additionally the 86xx
    L2 cache invalidate code used an "andi" instruction where an "andis"
    instruction should have been used.

    This patch addresses both of these bugs.

    Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
    Acked-By: Jon Loeliger <jdl@freescale.com>

commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri May 9 10:16:13 2008 +0200

    Avoid infinite loop "Generating include/autoconf.mk"

    Fix a bogus circular dependency that caused an infinite loop of
    "Generating include/autoconf.mk" again and again.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 567fb852178dbf59529d7301620a3f3732a4b02d
Author: Stelian Pop <stelian@popies.net>
Date:	Thu May 8 22:52:09 2008 +0200

    Fix @ -> <at> substitution

    When applying the AT91CAP9 patches upstream, something transformed
    the '@' character into the ' <at> ' sequence.

    The patch below restores the original form in all the places where
    it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
    were copied from AT91CAP9, and a couple of other files where the
    ' <at> ' sequence was present).

    Signed-off-by: Stelian Pop <stelian@popies.net>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 73ccb3410a0785593cda7aee455dfc51f790e281
Author: Gary Jennejohn <gary.jennejohn@freenet.de>
Date:	Mon Apr 28 14:04:32 2008 +0200

    ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board

    Signed-off-by: Gary Jennejohn <garyj@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ef2642625cbfb1c3695e3478d08ae515052a4950
Author: Stefan Roese <sr@denx.de>
Date:	Thu May 8 11:10:46 2008 +0200

    ppc4xx: Kilauea: Fix incorrect FPGA FIFO address

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a00eccfebc954ad9485161efeca7d9aaf626d530
Author: Stefan Roese <sr@denx.de>
Date:	Thu May 8 11:05:15 2008 +0200

    ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards

    This patch adds fdt (flattened device tree) support to all remaining AMCC
    eval boards. Most newer boards already support device tree. With this patch,
    all AMCC boards now enable device tree passing from U-Boot to Linux
    arch/powerpc kernels.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
Author: Stefan Roese <sr@denx.de>
Date:	Thu May 8 11:01:09 2008 +0200

    ppc4xx: Add weak default ft_board_setup() routine

    This patch adds a default ft_board_setup() routine to the 4xx fdt code.
    This routine is defined as weak and can be overwritten by a board specific
    one if needed.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
Author: Stefan Roese <sr@denx.de>
Date:	Thu May 8 10:48:58 2008 +0200

    ppc4xx: acadia: Add fdt support and fix section overlap problem

    This patch adds fdt (flattened device tree) support to the AMCC
    Acadia eval board. This increases the image size and it doesn't
    fit anymore into 256kByte. Since we didn't want to remove features
    from the configuration, we decided to increase the U-Boot image size
    (add one flash sector).

    Also changed the default environment definition to make it
    independent of such changes.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4adb3023de75bc150f088c8935db340930ad38c8
Author: Ira Snyder <iws@ovro.caltech.edu>
Date:	Tue Apr 29 11:18:54 2008 -0700

    ppc4xx: Add device tree support to AMCC Yosemite

    Add support for booting with a device tree blob. This is needed to boot
    ARCH=powerpc kernels. Also add support for setting the eth0 mac address
    via the ethaddr variable.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
Author: Dave Mitchell <dmitchell@amcc.com>
Date:	Wed May 7 09:00:23 2008 -0700

    ppc4xx: Fix typos in 460GT/EX FBDV array

    Corrected two typos in the 460GT/EX FBDV array.

    Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed May 7 16:54:31 2008 -0500

    85xx: Limit CPU2 workaround to parts that have the errata

    Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit a5fe514e8ace564300d2c1d73846ddff49654243
Author: Lee Nipper <lee.nipper@freescale.com>
Date:	Fri Apr 25 15:44:45 2008 -0500

    mpc83xx: system performance settings for MPC8349EMDS.

    These same settings are used on MPC8349ITX, and
    improve performance on MPC8349EMDS.

    Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 49387dba910e485640b575e920ee463b7e611dc3
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue May 6 13:22:52 2008 +0900

    [MIPS] cpu/mips/cache.S: Fix build warning

    Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
    warns illegal global symbol references by bal (and jal also) instruction.
    This does not happen with the latest binutils v2.18.

    Here's an example on gth2_config:

    mips_4KC-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
    stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
    c -EB -c -o cache.o cache.S
    cache.S: Assembler messages:
    cache.S:243: Warning: Pretending global symbol used as branch target is local.
    cache.S:250: Warning: Pretending global symbol used as branch target is local.

    In principle, gas might be sensitive to global symbol references in PIC
    code because they should be processed through GOT (global offset table).
    But if `bal' instruction is used, it results in PC-based offset jump.
    This is the cause of this warning.

    In practice, we know it doesn't matter whether PC-based reference or GOT-
    based. As for this case, both will work before/after relocation. But let's
    fix the code.

    This patch explicitly sets up a target address, then jump there.
    Here's an example of disassembled code with/without this patch.

     90000668:	     1485ffef	     bne     a0,a1,90000628 <mips_cache_reset+0x20>
     9000066c:	     ac80fffc	     sw      zero,-4(a0)
     90000670:	     01402821	     move    a1,t2
    -90000674:	     0411ffba	     bal     90000560 <mips_init_icache>
    -90000678:	     01803021	     move    a2,t4
    -9000067c:	     01602821	     move    a1,t3
    -90000680:	     0411ffcc	     bal     900005b4 <mips_init_dcache>
    -90000684:	     01a03021	     move    a2,t5
    -90000688:	     03000008	     jr      t8
    -9000068c:	     00000000	     nop
    +90000674:	     01803021	     move    a2,t4
    +90000678:	     8f8f83ec	     lw      t7,-31764(gp)
    +9000067c:	     01e0f809	     jalr    t7
    +90000680:	     00000000	     nop
    +90000684:	     01602821	     move    a1,t3
    +90000688:	     01a03021	     move    a2,t5
    +9000068c:	     8f8f81e0	     lw      t7,-32288(gp)
    +90000690:	     01e0f809	     jalr    t7
    +90000694:	     00000000	     nop
    +90000698:	     03000008	     jr      t8
    +9000069c:	     00000000	     nop

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
Author: Vlad Lungu <vlad.lungu@windriver.com>
Date:	Mon May 5 14:04:00 2008 +0300

    Allow building mips versions with ELDK 3.1.1

    .gpword works only with local symbols on certain binutils versions

    Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>

commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon May 5 12:52:36 2008 +0200

    MAKEALL: add inka4x0 board

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun May 4 21:34:23 2008 +0200

    kb9202 board: fix build problem.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun May 4 12:10:33 2008 +0200

    Prepare for v1.3.3-rc3

    Update ChNAGELOG, minor white space cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun May 4 00:35:15 2008 +0200

    drivers/net/tsec.c: Fix typo.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri May 2 21:45:12 2008 -0400

    version_autogenerated.h: use printf rather than echo -n

    Some systems are dumb and do not implement the -n flag to echo (like OS X).
    Convert the Makefile to use printf as this should work everywhere.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4acc2a108ad0a669165924704a6cb083f9138242
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri May 2 18:17:50 2008 -0400

    fix building when saveenv is disabled in some setups

    If you enable environment in the flash, but disable the embedded
    option, and you disable the saveenv command, then the #if nested
    logic will trigger a compile failure:
    env_flash.c: In function 'env_relocate_spec':
    env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
    The fix is to add CMD_SAVEENV ifdef protection like everywhere else.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
Date:	Fri May 2 16:10:04 2008 -0400

    SBC8548: fix address mask to allow 64M flash

    Fix incorrect mask to enable all 64MB of onboard flash.
    Previously U-Boot incorrectly mapped only 8MB of flash, this
    patch correctly maps all the available flash.

    Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>

commit 3648085c464c8c22ef76fab006ca4344d3796124
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Fri May 2 19:48:56 2008 +0200

    qemu_mips: add README

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6fdd002689190a0022c7b3dbab37fcba724580ce
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Fri May 2 02:35:59 2008 +0200

    Fix misspelled comment

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu May 1 04:13:05 2008 -0400

    mkimage: make mmap() checks consistent

    The mmap() related code is full of inconsistent casts/constants when
    it comes to error checking, and may break when building on some
    systems (like ones that do not implicitly define the caddr_t type).
    Let's just avoid the whole mess by writing the code nice and clean in
    the first place.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Thu May 1 09:05:34 2008 +0200

    Fix defined but not used build warning

    - warning: 'srom' defined but not used

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Thu May 1 09:05:26 2008 +0200

    Fix implicit declaration build warnings

    - warning: implicit declaration of function ‘serial_initialize’

    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

commit 9acde129cc3f9c1b3bc11a821480dd446774d618
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Tue Apr 29 19:18:32 2008 +0200

    TSEC: add config options for VSC8601 RGMII PHY

    The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
    and Tx clock lines. They are configured using 2 bits in extended
    register 0x17.
    Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
    been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Acked-by: Andy Fleming <afleming@freescale.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>
    --

     drivers/net/tsec.c |    6 ++++++
     drivers/net/tsec.h |    3 +++
     2 files changed, 9 insertions(+), 0 deletions(-)

commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat May 3 23:07:15 2008 +0200

    Revert "ColdFire: Get information from the correct GCC"

    This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
    (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).

commit c4e5f52a58d278eebb87f476e353972c5dacea40
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat May 3 22:25:00 2008 +0200

    config.mk: use correct (cross) compiler

    Some config.mk files reference $(CC) to test for specific tool chain
    features, so make sure $(CC) gets set before including any such
    config files.

    This patch replaces commit b7166e05a5 ("ColdFire: Get information from
    the correct GCC").

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 27c38689d0cfde0e444239345f97b5eecc9f4067
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu May 1 02:13:44 2008 +0200

    pxa: fix previous definition on cpu init

    start.S:183:1: warning: "ICMR" redefined
    In file included from start.S:33:
    include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
    start.S:187:1: warning: "RCSR" redefined
    ...

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6d12e697de794d700767f22f950e3026ccf4daf6
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu May 1 02:13:43 2008 +0200

    pxa: fix pcmcia operation on 'i' may be undefined

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Apr 30 16:24:35 2008 -0500

    MPC8610HPCD: Drop -O2 from the build flags

    Make the flags use -Os like all other boards

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 30 15:50:39 2008 +0200

    RTC: Fix month offset by one problem in M41T62 RTC driver

    This patch fixes a problem with the month being read and written
    incorrectly (offset by one). This only gets visible by also using
    the Linux driver (rtc-m41t80).

    Tested on AMCC Canyonlands.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 141ba1cad8e6598a2466e7e2976c6a12285df619
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat May 3 13:51:44 2008 +0900

    [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker

    Current trick to pick up GNU assembler minor version uses a dot(.) as a
    delimiter, and take the second field to obtain minor version number. But
    as can be expected, this doesn't work with a version string which has
    dots more than needs.

    Here's an example:

    $ mips-linux-gnu-as --version | grep 'GNU assembler'
    GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
    $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
    2-129) 2
    $

    This patch restricts the version format to 2.XX.XX... This will work
    in most cases.

    $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
    2.18.50.20080215
    $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
    18
    $

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit ea638951acead7f1086c908c0b9f086beab82a22
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat May 3 13:51:28 2008 +0900

    [MIPS] cpu/mips/cache.S: Add dcache_enable

    Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
    "allow ports to override bootelf behavior") requires ports to have this
    function.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu May 1 21:30:16 2008 +0200

    onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts

    Onenand needs a version of memcpy() which performs 16 bit accesses
    only; make sure the name does not conflict with the standard
    function.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 12bc4e94251c369c529ffa505cf58b148c372f7f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Apr 30 22:38:17 2008 +0200

    cmd_nand: fix warning: str2long ncompatible pointer type

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Apr 4 11:16:11 2008 -0500

    Fix calculation of I2C clock for some 86xx chips

    Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
    There is no pattern that can be used to determine which chips use which
    frequency, so the only way to determine is to look up the actual SOC
    designation and use the right value for that SOC.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Apr 30 12:11:19 2008 -0500

    ColdFire: Fix ethernet hang issue for mcf547x_8x

    The ethernet hang is caused by receiving buffer in DRAM is not
    yet ready due to access cycles require longer time in DRAM.
    Relocate DMA buffer descriptors from DRAM to internal SRAM.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Apr 30 12:10:47 2008 -0500

    ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c

    Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Apr 30 12:10:23 2008 -0500

    ColdFire: Get information from the correct GCC

    Signed-off-by: Kurt Mahan <kmahan@freescale.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
Date:	Wed Apr 30 18:02:59 2008 +0200

    Fix warning in env_nand.c if compiled for DaVinci Schmoogie

    Fix warnings

    nv_nand.c: In function 'saveenv':
    env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
    env_nand.c: In function 'env_relocate_spec':
    env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type

    if compiled for davinci_schmoogie_config.

    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
    Ack by: Sergey Kubushyn <ksi@koi8.net>

commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Apr 30 13:34:40 2008 +0200

    Fix warnings while compiling net/net.c for MPC8610HPCD board

    MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
    causing overriding default -Os option. New gcc (ver. 4.2.2)
    produces warnings while compiling net/net.c file with -O2
    option. The patch is an attempt to fix this.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 58b575e575c25fdf8c88141e145db201f3092149
Author: Sascha Laue <Sascha.Laue@gmx.biz>
Date:	Wed Apr 30 15:23:38 2008 +0200

    lwmon5: fix offset error in sysmon0 POST

    Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e7419b243a373de4ee042f7d4f45f66de787240d
Author: Sascha Laue <Sascha.Laue@gmx.biz>
Date:	Wed Apr 30 15:16:35 2008 +0200

    lwmon5: fix manual merge error in POST

    Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>

commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 30 17:46:26 2008 +0200

    cmd_nand.c: fix another 'incompatible pointer type' warning.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit de109d909707e2dfe806be5efc3cdb103b47c8ad
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 30 17:25:07 2008 +0200

    Makefile: fix parallel builds

    This problem shows up with parallel builds only; it results in
    somewhat cryptic error messages like

	$ JOBS=-j6 MAKEALL netstar
	Configuring for netstar board...
	arm-linux-ld: cannot find -lgeneric
	make[1]: *** [eeprom.srec] Error 1

    A few boards (like netstar and voiceblue) need some libraries for
    building; however, the board Makefile does not contain any such
    dependencies which may cause problems with parallel builds. Adding
    such dependencies is difficult as we would also have to provide build
    rules, which already exist in the respective library Makefiles.

    To solve this, we make sure that all libraries get built before the
    board code.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 30 14:51:36 2008 +0200

    ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module

    This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
    used for NAND booting to match the values needed for the new 512MB
    DIMM modules shipped with the productions boards:

    Crucial: CT6464AC667.8FB

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ea9202a659dc75996facf1475f1866a19a9d3129
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 30 10:49:43 2008 +0200

    ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c

    This patch fixes a problem with DIMMs that have 8 banks. Now the
    MCIF0_MBxCF register will be setup correctly for this setup too.

    This was noticed with the 512MB DIMM on Canyonlands/Glacier.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Apr 29 23:41:06 2008 +0200

    Prepare v1.3.3-rc2, again.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b7fcc4c13993782342cf5cd20d237a6281648a0b
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Apr 29 23:35:24 2008 +0200

    Prepare v1.3.3-rc2

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Apr 29 23:32:20 2008 +0200

    common/env_nand.c: fix one more incompatible pointer type issue

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Apr 29 21:33:08 2008 +0200

    post/board/lwmon5/sysmon.c: fix manual merge error.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Apr 29 12:54:59 2008 -0500

    85xx: Add -mno-spe to e500/85xx builds

    Newer gcc's might be configured to enable autovectorization by default.
    If we happen to build with one of those compilers we will get SPE
    instructions in random code.

    -mno-spe disables the compiler for automatically generating SPE
    instructions without our knowledge.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Apr 29 10:18:34 2008 -0500

    Update .gitignore for zlib.h

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 45239cf4152109caa925145ccd433529902df887
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Apr 29 10:27:08 2008 -0500

    85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs

    All the 85xx and 86xx UM describe the register as timing_cfg_3
    not as ext_refrec.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ef7d30b14394e4c4a153118f5845760cadada02a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Apr 29 10:28:34 2008 -0500

    85xx/86xx: Rename DDR init address and init extended address register

    Rename init_addr and init_ext_addr to match the docs between
    85xx and 86xx.  Both now use 'init_addr' and 'init_ext_addr'.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit cf6cc014270549684873a5972d2595052c468cb6
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Apr 28 02:24:04 2008 -0500

    85xx: Additional fixes and cleanup of MP code

    * adjust __spin_table alignment to match ePAPR v0.94 spec
    * loop over all cpus when determing who is up.  This fixes an issue if
      the "boot cpu" isn't core0.  The "boot cpu" will already be in the
      cpu_up_mask so there is no harm
    * Added some protection in the code to ensure proper behavior.  These
      changes are explicitly needed but don't hurt:
      - Added eieio to ensure the "hot word" of the table is written after
	all other table updates have occurred.
      - Added isync to ensure we don't prefetch loading of table entries
	until we a released

    These issues we raised by Dave Liu.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b2d527a8b9fb50afccbaf79b5540952585cdc760
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Tue Apr 29 15:06:41 2008 +0200

    lwmon5: minor clean-up to include/configs/lwmon5.h

    LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
    the CFG_DSPIC_TEST_ADDR definition more readable.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit f4c4d21a885ccc222fd0acdf653b683249e85117
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 29 16:08:05 2008 +0200

    ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Tue Apr 29 13:32:45 2008 +0200

    ppc flush_cache: add watch-dog triggering into the loops.

    Some boards (e.g. lwmon5) need rather a frequent watch-dog
    kicking. Since the time it takes for the flush_cache() function
    to complete its job depends on the size of data being flushed, one
    may encounter watch-dog resets on such boards when, for example,
    download big files over ethernet.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit cab99d6f3281ab6784feccf98b9b425daa58418a
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 29 14:44:54 2008 +0200

    ppc4xx: Fix compilation warning in denali_spd_ddr2.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 29 14:12:07 2008 +0200

    ppc4xx: Fix Katmai CFG_MONITOR_LEN

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 29 13:57:07 2008 +0200

    ppc4xx: Complete remove bogus dflush()

    Since the current dflush() implementation is know to have some problems
    (as seem on lwmon5 ECC init) this patch removes it completely and replaces
    it by using clean_dcache_range().

    Tested on Katmai with ECC DIMM.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 29 13:36:51 2008 +0200

    ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()

    As it seems the "old" ECC initialization routine by using dflush() didn't
    write all lines in the dcache back to memory on lwmon5. This could lead
    to ECC error upon Linux booting. This patch changes the program_ecc()
    routine to now use clean_dcache_range() instead of dflush().
    clean_dcache_range() uses dcbst which is exactly what we want in this
    case.

    Since dflush() is known is cause problems, this routine will be
    removed completely and replaced by clean_dcache_range() with an
    additional patch.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Mon Apr 28 18:19:34 2008 +0200

    POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
Author: Markus Brunner <super.firetwister@googlemail.com>
Date:	Mon Apr 28 08:47:47 2008 +0200

    ppc4xx: Fixup ebc clock in FDT for 405GP/EP

    On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
    and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
    doesn't exist.

    Signed-off-by: Markus Brunner <super.firetwister@gmail.com>

commit 2ef7503a593c77a80c2a054011970227c4b62774
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Apr 24 07:57:17 2008 +0200

    NE2000: Fix regresssion introduced by e710185aae90 on non AX88796

    Move non-inlied functions into specific drivers file
    Set get_prom as weak

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Vlad Lungu <vlad@comsys.ro>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Apr 3 17:04:19 2008 +0200

    net: make ARP timeout configurable

    Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
    On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
    to the boards get lost, which typically are ARP replies. By configuring
    the timeout to a lower value we significantly improve the first network
    transfer time on this board. The timeout is specified in milliseconds,
    later internally it is converted to deciseconds, because it has to be
    converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
    different boards.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Apr 3 13:36:18 2008 +0200

    minor cs8900 driver clean up

    Remove a redundant register definition, clean up some coding style
    violations.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 22:01:04 2008 +0200

    jffs2_1pass.c: fix incompatible pointer type warning

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
Author: Sascha Laue <Sascha.Laue@gmx.biz>
Date:	Tue Apr 1 10:10:18 2008 +0200

    lwmon5: update dsPIC POST spezification

    The specification for the lwmon5 board dsPIC POST got changed.
    Also add defines for the temperatures  and voltages.

    Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>

commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
Author: Sascha Laue <Sascha.Laue@gmx.biz>
Date:	Tue Apr 1 15:13:03 2008 +0200

    Fix watchdog POST for lwmon5

    If the hardware watchdog detects a voltage error, the watchdog sets
    GPIO62 to low. The watchdog POST has to detect this low level.

    Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit dd5748bcd669f46aeb6686c1b341323843738ccc
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Mon Apr 28 14:37:14 2008 +0200

    rtl8169: fix compiler warnings

    Fix multiple compiler warnings related to argument type mismatch.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Mon Apr 28 14:36:06 2008 +0200

    IDE: fix compiler warnings

    The IDE driver can use 32-bit addresses in LBA mode, in which case it
    spits multiple warnings during compilation. Fix them.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit db9084de28c46ac81c8f681722cb0d7411be4d7f
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Mon Apr 28 14:35:57 2008 +0200

    LinkStation: fix compiler warning, add a maintainer

    out_8 wants a pointer to an unsigned as the first argument. Add a
    maintainer for Linkstation boards.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit c71abba3cb67b063f789f17abf6c7447727c0cd5
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 14:55:12 2008 +0200

    cmd_nand.c: fix "differ in signedness" problem

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f2c288a35341ad02ac03b1563d786763c9c8f159
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 12:48:47 2008 +0200

    pcnet.c: fix a merge issue

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 12:08:18 2008 +0200

    NAND: fix some strict-aliasing compiler warnings

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
Author: Stefan Roese <sr@denx.de>
Date:	Mon Apr 28 11:37:14 2008 +0200

    ppc4xx: Fix compile warning of hcu4 board

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 11:31:23 2008 +0200

    MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Mon Apr 28 00:25:32 2008 +0200

    mx31ads: fix loadaddr environment variable define

    Arithmetic expressions do not get evaluated under stringification. Remove
    default network configuration, add DHCP command support. Thanks to Felix
    Radensky for reporting.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 144eec777ac07bcb12bd38245a5a289f694a7f98
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 10:55:24 2008 +0200

    katmai: fix section overlap problem

    Since we didn't want to remove features from the configuration, we
    decided to increase the U-Boot image size (add one flash sector).

    Also changed the default environment definition to make it
    independent of such changes.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit 941d696d25624e3cc65ebf924199541acf52d74e
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Apr 28 10:55:24 2008 +0200

    katmai: fix section overlap problem

    Since we didn't want to remove features from the configuration, we
    decided to increase the U-Boot image size (add one flash sector).

    Also changed the default environment definition to make it
    independent of such changes.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Sat Apr 26 11:44:44 2008 -0500

    post: Fix building with O=

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Apr 26 01:55:00 2008 +0200

    Prepare v1.3.3-rc1

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 19cf2ec90d8ce52da60c1693693c4048cb810967
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Apr 26 01:25:39 2008 +0200

    post/Makefile: make sure to use the correct flags

    ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
    messages to be printed.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Apr 26 00:34:42 2008 +0200

    Coding Style cleanup, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f9204e15173834ff8d123e36279ce49c3c6c74fc
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Sun Apr 20 10:38:12 2008 +0200

    i.MX31: Enable SPI and MC13783/RTC support for the Litekit board

    This patch enables SPI and MC13783/RTC support for the Litekit board.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit f97abbfb47d9e407354e157cae3f6369e460cd37
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Fri Apr 25 01:08:32 2008 -0500

    MPC8544DS: decode pcie3 end-point configuration correctly.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 292188e15523c165c4269403fdcd33c26d89176e
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:	Fri Apr 25 00:55:09 2008 -0500

    MPC8544DS: Removes the unknown flash message information

    This patch removes the unknown flash message information:
    '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
    This unknown flash message is caused by PromJet.
    Some of the board user is unhappy with this information.

    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Thu Apr 24 14:07:38 2008 -0500

    mpc83xx: bump loadaddr over fdtaddr to 0x500000

    this seems as a good compromise between human memory, typing,
    and last but not least, to accommodate for current and future kernel bloat.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
    Acked-by: Dave Liu <daveliu@freescale.com>

commit be5a7190265a34d968578ff266549c60f6f57654
Author: Dave Liu <r63238@freescale.com>
Date:	Tue Apr 15 13:12:23 2008 +0800

    mpc83xx: clean up the readme for 83xx boards

    1. correct the typo
    2. correct the memory map for 837xerdb board

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
Author: Dave Liu <r63238@freescale.com>
Date:	Tue Apr 15 13:11:11 2008 +0800

    mpc83xx: remove the unused CPM's stuff

    The MPC83xx family never have CPM block, so remove it from 83xx.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit c63ad6325a8ac0097a54b418a3288926b0484b18
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Apr 18 16:29:40 2008 +0200

    cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST

    This patch adds a configurable flash auto protection list that can be used
    to make U-Boot protect flash regions in flash_init().

    The idea has been discussed on the u-boot mailing list starting
    on Nov 18th, 2007.

    Even this patch brings a new feature it is used as a bugfix for 4xx
    platforms where flash_init() does not completely protect the
    monitor's flash range in all situations.

    U-Boot protects the flash range from CFG_MONITOR_BASE to
    (CFG_MONITOR_BASE + monitor_flash_len  - 1) by default. This does not
    include the reset vector at 0xfffffffc.

    Example:
    #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}

    This config option will auto protect the last 512k of flash that
    contains the bootloader on board like APC405 and PMC405.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
Author: Stefan Roese <sr@denx.de>
Date:	Fri Apr 25 13:59:03 2008 +0200

    ppc4xx: Remove double defines in lwmon5.h

    introduced with latest lwmon5/POST merge

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7590378fb9c686709492ceb142825cd058255956
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Apr 25 13:54:02 2008 +0200

    Use watchdog-aware functions when calculating hashes of images - take two

    Some files didn't get updated properly with the "Use watchdog-aware
    functions when calculating hashes of images" commit, this commit
    fixes this.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 8e048c438e20ec89b49da5f085f8f756eba6e587
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Apr 25 12:01:39 2008 +0200

    ppc4xx: Add bootcount limit handling for APC405 boards

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Apr 25 12:10:09 2008 +0200

    Use watchdog-aware functions when calculating hashes of images

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 25 12:44:08 2008 +0200

    USB: fix more GCC 4.2.x aliasing warnings

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Acked-by: Markus Klotzbuecher <mk@denx.de>

commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 25 12:41:53 2008 +0200

    lib_generic/crc32.c: add missing #include <watchdog.h>

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 25 11:52:21 2008 +0200

    lib_generic/crc32.c: fix compile problem

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 22 12:20:32 2008 +0200

    ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt

    The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
    environment variable will now get passed to the Linux kernel by setting
    the device_type property of the PCIe device tree node. For normal root-
    complex configuration it will keep its defaults value of "pci" and for
    endpoint configuration it will get changed to "pci-endpoint".

    Signed-off-by: Stefan Roese <sr@denx.de>

commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu Apr 24 10:30:53 2008 +0200

    lwmon5: watchdog POST fix

    Use the GPT0_MASKx registers as the temporary storage for watch-dog
    timer POST test instead of GPT0_COMPx. The latter
    (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Mon Apr 21 18:10:14 2008 -0500

    lib_ppc: Revert "Make MPC83xx one step closer to full relocation."

    This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
    proven problematic getting right from the start at least on 83xx and
    4xx.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit a99715b8ebfc500f3f40e01b36b64d473938443d
Author: Detlev Zundel <dzu@denx.de>
Date:	Fri Apr 18 14:50:01 2008 +0200

    Realining some header definitions.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 4acbc6c7f993cae409c424615415a3e76820f13d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Apr 24 07:57:16 2008 +0200

    NE2000: coding style cleanup

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b4aff1ffaf7120032c653357c007faa14f74d29d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Apr 23 00:11:47 2008 +0900

    qemu-mips.h: Add CFI support

    CONFIG_ENV_OVERWRITE is also added.

    This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Apr 22 22:47:27 2008 +0900

    doc/README.mips: Add MIPS notes

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 215b01bba8bc662d35f72b084700b192d367dfb4
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Apr 22 12:27:56 2008 +0200

    Add support for calculating hashes with watchdog triggering

    Implement watchodg-aware variants of hash calculation functions:
    - crc32_wd()
    - md5_wd()
    - sha1_csum_wd()
    The above functions calculate the hash of the input buffer in chunks,
    triggering the watchdog after processing each chunk. The chunk size
    is given as a function call parameter.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Date:	Wed Apr 23 11:02:12 2008 +0900

    qemu-mips: Cleanup whitespace, indentation, etc.

    No functional change.

    This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
    Then I re-created from scratch, and changed more lines than the original.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
Author: Vlad Lungu <vlad@comsys.ro>
Date:	Wed Oct 10 23:02:09 2007 +0300

    Fixed pcnet io_base

    Bus and phys address are not always the same

    Signed-off-by: Vlad Lungu <vlad@comsys.ro>

commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Apr 24 23:44:26 2008 +0200

    drivers/net/pcnet.c: Coding Style cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
Author: Vlad Lungu <vlad@comsys.ro>
Date:	Wed Oct 10 23:04:23 2007 +0300

    Added Am79C970A chip id to pcnet

    Signed-off-by: Vlad Lungu <vlad@comsys.ro>

commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Sun Apr 20 10:35:03 2008 +0200

    i.MX31: Fix architecture numbers for ADS and Litekit boards

    Correct the Linux architecture number for i.MX31 Litekit and ADS boards.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit e7ae84d6c7288790e88639f57cb60daf89c11369
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Sun Apr 20 10:36:36 2008 +0200

    i.MX31: Use symbolic names for Litekit membases.

    Use symbolic names instead of hard coded addresses for Litekit membases.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Apr 19 17:59:20 2008 +0200

    Fix show_boot_progress prototype

    in commit fad634071 "make show_boot_progress () weak."
    show_boot_progress is supposed to be declared as weak but declared as
    inline instead.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit edbed247a14d70b94958010f736621212285de91
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Apr 18 12:39:23 2008 +0200

    Memory footprint optimizations

    As suggested by Wolfgang Denk:
    - image printing functions:
      - remove wrappers
      - remove indentation prefix from functions' signatures
    - merge getenv_verify and getenv_autostart into one parametrized function

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Tue Apr 15 13:33:11 2008 +0200

    MX31ADS environment variable update, spi and rtc support

    Update MX31ADS default environment to better match the flash layout and
    the memory map, support SPI and RTC.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Apr 21 09:28:36 2008 -0500

    85xx: Round up frequency calculations to get reasonable output

    eg. because of rounding error we can get 799Mhz instead of 800Mhz.

    Introduced DIV_ROUND_UP and roundup taken from linux kernel.

    Signed-off-by: Dejan Minic <minic@freescale.com>
    Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Apr 23 16:58:04 2008 -0500

    fsl_pci: Only modify registers if we have them

    pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 83fe32334337def160b302aa9d152d808bfcc68e
Author: Markus Klotzbücher <mk@denx.de>
Date:	Wed Apr 23 10:57:33 2008 +0200

    USB: remove a cpu bug workaround for an unsupported architecture.

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit f957576cb53e6cfab412709cfc8db1afd39d21c3
Author: Markus Klotzbücher <mk@denx.de>
Date:	Wed Apr 23 10:53:23 2008 +0200

    USB: fix those pesky aliasing warnings issued by gcc-4.2

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 89cdab788f3716b335fefb60b836ebcf975aceab
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Mar 31 11:02:01 2008 -0400

    crc32: use uint32_t rather than unsigned long

    The envcrc.c does sizeof(unsigned long) when calculating the crc, but
    this is done with the build toolchain instead of the target tool
    chain, so if the build is a 64bit system but the target is 32bits,
    the size will obviously be wrong. This converts all unsigned long
    stuff related to crc32 to uint32_t types. Compile tested only: output
    of ./tools/envcrc when run on a 32bit build system matches that of a
    64bit build system.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 80c40b765b3642ddb9f3392b7898715aab44a29c
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:	Wed Mar 26 09:53:29 2008 +0100

    ARM: Davinci: Fix DM644x timer overflow handling and cleanup

    Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.

    Changes:

    - Remove *_masked() functions as noted by Wolfgang

    - Adapt register naming to recent TI spec (sprue26, March 2007)

    - Fix reset_timer() handling

    - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.

    [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179

    - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).

    Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!

    Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.

    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
    Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>

commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Wed Apr 9 16:09:41 2008 +0200

    Added watchdog triggering calls in the "mtest" test function.

    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Sun Apr 6 19:19:14 2008 +0200

    lwmon5 watchdog: limit trigger rate

    Limit the rate of h/w watch-dog triggering on the LWMON5 board by
    the CONFIG_WD_MAX_RATE value.

    Note that an earlier version of this patch which used microseconds
    instead of ticks dis not work. The problem was that we used
    usec2ticks() to convert microseconds into ticks. usec2ticks() uses
    get_tbclk(), which in turn calls get_sys_info(). It turns out that
    this function does a lot of prolonged operations (like divisions)
    which take too much time so we do not trigger the watchdog in time,
    and it resets the system.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 2d2b994a30bb100774dc747ae9865b7f95285a88
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Mon Mar 31 10:51:37 2008 +0200

    POST: move CONFIG_POST to Makefiles

    Introduce the new logical option CONFIG_HAS_POST which is set when the
    platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
    to determine should the POST libs be compiled for the selected target
    platform, or not.

    To avoid breaking u-boot linking process, the empty post/libpost.a file is
    created for platforms which do not have POSTs.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Mon Mar 31 10:49:34 2008 +0200

    POST: preparations for moving CONFIG_POST to Makefiles

    Remove CONFIG_POST ifdefs from the post/ source files.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 22 14:14:20 2008 +0200

    ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage

    This patch fixes the Canyonlands and Glacier default environment to better
    fit to the arch/powerpc device-tree kernels. The variables dealing with
    arch/ppc booting are removed, since these boards are supported only in
    arch/powerpc. Glacier uses the same config file as Canyonlands.

    Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 22 14:06:42 2008 +0200

    ppc4xx: Small coding style cleanup for the latest esd patches

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 79941d63bc03aed8c48d7602f18217cc200ee931
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 18:01:07 2008 +0200

    ppc4xx: Update CPU strapping for PMC440 boards

    This patch removes the temporary 'test' strapping option
    of the sbe command. The '667' strapping option now uses
    a PLB/PCI divider of 3.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit f00cf3193a6635355b121e90debb2f54e777e7da
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 14:42:21 2008 +0200

    ppc4xx: Remove unused APC405 strataflash driver

    The APC405 board support has been migrated to use the common
    CFI flash driver.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 1c686676a86473bbd92151f0544e109413f6ed06
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 14:42:17 2008 +0200

    ppc4xx: Update APC405 configuration

    - enable esd's auto_update mechanism
    - support alternative flash layout on rev. 1.8 boards
    - update default environment
    - use common CFI flash driver
    - coding style cleanup

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 0b9872515a521bf7866dc24b85ddce708e60d702
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 14:42:11 2008 +0200

    ppc4xx: Update APC405 board support

    - enable esd's auto_update mechanism
    - fix LCD support on latest hardware revision (uses other LCD controller)
    - support alternative flash layout on rev. 1.8 boards
    - coding style cleanup

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 83975d02e225e231960784972e7820a8b303756b
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 14:42:06 2008 +0200

    ppc4xx: update esd's common auto_update code for 405 boards

    - Coding style cleanup (long lines)
    - improve handling of protected flash regions
    - remove dead code

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit b9233fe5d59cb25d975071616bd1035d6f4c2285
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 14:41:59 2008 +0200

    ppc4xx: Update esd's common LCD code for 405 boards

    - Coding style cleanup (long lines)
    - Add s1d13505 support
    - Make some functions return a result code instead of void

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit dea68189424c3f1242427a8146a3861bf093173c
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 11:36:55 2008 +0200

    ppc4xx: Update FPGA image for APC405 boards

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 2a05b152924acfcec3b037693329e517e6d3578f
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 11:36:08 2008 +0200

    ppc4xx: Update bootlogo for APC405 boards

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
Author: Stefan Roese <sr@denx.de>
Date:	Fri Apr 18 16:41:31 2008 +0200

    ppc4xx: Add dcache_enable() for 440

    dcache_enable() was missing for 440 and the patch
    017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
    "] behavior uses this function.

    Note: Currently the cache handling functions like
    d/icache_disable/enable() are NOP's on 440. This may be changed in the
    future.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a49e0d177a0749614b316ec847fb623f09c82c07
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Mon Apr 21 11:19:04 2008 +0200

    video: Add missing free for logo memory

    This patch adds two missing free()s.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
Author: Troy Kisky <troy.kisky@boundarydevices.com>
Date:	Mon Sep 24 16:41:43 2007 -0700

    PATCH - Fix oob data copied into supplied buffer

    This patch correctly sets the oobavail variable
    and fixes a bug where the oob data was not valid when
    there where multiple groups in oobfree.

    First segment fixes a typo
    Second segment fixes a bug where oob data may be copied incorrectly.
    Third segment adds an error message when exiting due to write protect.
    Forth segment fixes a bug where oobavail may be set incorrectly.

    Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Fri Apr 18 17:24:32 2008 +0200

    ppc4xx: Fix sys_get_info() for 405GP(r)

    This patch assigns the correct EBC clock for 405GP(r) CPUs
    to PPC4xx_SYS_INFO structure. Without this patch U-Boot
    uses an uninitialized EBC clock in its startup message.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Apr 20 15:39:38 2008 -0700

    Makefile: remove nand_spl/System.map when cleaning up.

commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Apr 20 15:35:52 2008 -0700

    MAKEALL: sort entries / lists.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0878af169b181868a105b5c33f3a6423e2c9fd60
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Apr 18 11:29:01 2008 -0500

    85xx: Fix size of cpu-release-addr property

    The cpu-release-addr is defined as always being a 64-bit quanity regardless
    if we are running on a 32-bit or 64-bit machine.

commit 88353a985109562a639b2f8a0c90d77011bfe374
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Apr 4 11:15:58 2008 -0500

    Fix calculation of I2C clock for some 85xx chips

    Some 85xx chips use CCB as the base clock for the I2C.  Some use CCB/2, and
    some use CCB/3.  There is no pattern that can be used to determine which
    chips use which frequency, so the only way to determine is to look up the
    actual SOC designation and use the right value for that SOC.

    Update immap_85xx.h to include the GUTS PORDEVSR2 register.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 18 11:44:27 2008 -0700

    Fix build breakage casued by commit c0559be371b2

	Change env_get_char from a global function ptr to a function.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 18 10:53:41 2008 -0700

    Coding Style cleanup, update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Apr 8 14:00:57 2008 -0400

    Add support for u-boot in svn and localversion-* files

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d23ff6827decf121461fbc5622612fd7effe207e
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Apr 3 17:04:22 2008 +0200

    MX31ADS network and flash updates

    This patch allows U-Boot to use buffered writes to the Spansion NOR
    flash installed on this board, and eliminates long delays in network
    transfers after the board startup.

    Also modify flash layout to embed main and redundant environment
    blocks in the U-Boot image.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit b5dc9b304d289831f291843ff88a45cbdf1a6290
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Mon Apr 14 10:53:12 2008 +0200

    Support for the MX31ADS evaluation board from Freescale

    This patch adds support for the MX31ADS evaluation board from Freescale,
    initialization code is copied from RedBoot sources, also provided by
    Freescale.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 8 10:33:29 2008 +0200

    ppc4xx: Change Canyonlands to support booting from 2k page NAND devices

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 8 10:33:28 2008 +0200

    ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM

    Signed-off-by: Stefan Roese <sr@denx.de>

commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 8 10:33:27 2008 +0200

    ppc4xx: Add Glacier NAND booting target

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 46f373838e384a4c23d13581b1dfa5acb66b5810
Author: Stefan Roese <sr@denx.de>
Date:	Tue Apr 8 10:31:00 2008 +0200

    nand_spl: Update nand_spl to support 2k page size NAND devices

    This patch adds support for booting from 2k page sized NAND device
    (e.g. Micron 29F2G08AAC).

    Tested on AMCC Canyonlands.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Apr 17 18:18:00 2008 +0200

    Fix crash on sequoia in ppc_4xx_eth_init

    Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
    with cache enabled (TLB Parity exeption). This patch
    fixes the problem.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Apr 17 18:15:27 2008 +0200

    ppc4xx: Fix crash on sequoia with cache enabled

    Currently U-Boot crashes on sequoia board in CPU POST if
    cache is enabled (CONFIG_4xx_DCACHE defined). The cache
    won't be disabled by change_tlb before CPU POST because
    there is an insufficient adress range check since
    CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
    this problem.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 43c509254fab375c49936498da944658117ed07c
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Thu Apr 17 23:35:13 2008 +0900

    Use jr as register jump instruction

    Current assembler codes are inconsistent in the way of register jump
    instruction usage; some use jr, some use j. Of course GNU as allows both
    usages, but as can be expected from `Jump Register' the mnemonic `jr' is
    more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
    at all.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 7ce63709828d37b08866e537339a169bd0db2bd3
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Tue Apr 15 14:15:30 2008 +0200

    RTC driver for MC13783

    MC13783 is a multifunction IS with an SPI interface to the host. This
    driver handles the RTC controller in this chip.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 38254f45b0b412332726c90d3184ad47479fcffb
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Tue Apr 15 14:14:25 2008 +0200

    New i.MX31 SPI driver

    This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
    only implemented and tested on i.MX31, can with a modified register layout
    and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
    controllers too.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Tue Apr 15 19:09:10 2008 +0200

    Fix name of i.MX31 boards in config file header

    Correct the name of the i.MX31 Litekit and phyCORE boards in config files.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit a49864593e083a5d0779fb9ca98e5a0f2053183d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Apr 13 19:42:19 2008 -0400

    allow ports to override go behavior

    Split the arch-specific logic out of the common go code and into a dedicated
    weak function called do_go_exec() that lives in cpu directories.  This will
    need review from i386/nios people to make sure I didn't break them.

commit 017e9b7925f74878d0e9475388cca9bda5ef9482
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Apr 13 19:42:18 2008 -0400

    allow ports to override bootelf behavior

    Change the bootelf setup function into a dedicated weak function called
    do_bootelf_exec.  This way ports can control the behavior however they
    like before/after calling the ELF entry point.

commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
Author: Ulf Samuelsson <ulf@atmel.com>
Date:	Sat Apr 12 20:56:03 2008 +0200

    Reorder ARM boards in Makefile

    Rearrange ARM boards in Makefile so that ARM926EJ-S boards
    are no longer under ARM92xT header.

    Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
    Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
Author: Ulf Samuelsson <ulf@atmel.com>
Date:	Sat Apr 12 20:29:44 2008 +0200

    Clean up dataflash partitioning

    This patch removes the board dependent parts from
    "drivers/mtd/dataflash.c".
    Each board relying on this, will have the appropriate
    code in a new file, "partition.c" in the board directory.
    board Makefiles updated to use the file.

    The dataflash partitions are aligned on sector/page boundaries.

    The CONFIG_NEW_DF_PARTITION was used to create named partitions
    This is now the default operation, and the CONFIG variable is removed.

    Signed-off-by: Ulf Samuelsson <ulf@atmel.com>

commit 51ecde946fec511a16346e498204ca10ad71080d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Apr 12 14:08:45 2008 +0200

    gitignore: udpate stgit generated and .patch file

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 18 00:15:36 2008 -0700

    Get rid of redundant copy of renamed header file.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
Author: Vlad Lungu <vlad@comsys.ro>
Date:	Fri Apr 11 21:20:14 2008 +0300

    Fix dependency generation for older gcc versions

     With gcc 3.3.3 at least, compilation fails with

    Generating include/autoconf.mk
    gcc: compilation of header file requested
    make: *** [include/autoconf.mk] Error 1

    since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.

    Signed-off-by: Vlad Lungu <vlad@comsys.ro>

commit cb1c4896905ab22fcd982e6a8a539f0031942e71
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Apr 11 11:07:49 2008 +0200

    Restore the ability to continue booting after legacy image overwrite

    Before new uImage code was merged, bootm code allowed for the kernel image to
    get overwritten during decompresion. new uImage introduced a check for image
    overwrites and refused to boot the image that got overwritten. This patch
    restores the old behavior. It also adds a warning when the image overwriten is
    a multi-image file, because in such case accessing componentes other than the
    first one will fail.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Apr 11 11:07:43 2008 +0200

    ppc: Fix ftd_blob variable init when processing raw blob

    Set fdt_blob variable before its value is printed out.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 3d36be030043cd841a2551d00a395135e363a64b
Author: Jason Wessel <jason.wessel@windriver.com>
Date:	Thu Apr 10 14:30:16 2008 -0500

    Remove all the search paths from the .lds files.

    The cross compiler is responsible for providing the correct libraries
    and the logic to find the linking libraries.

    Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Mon Apr 14 15:44:16 2008 +0200

    Boot-related documentation update

    - document 'bootm_low' and 'bootm_size' environment variables
    - update inaccurate CFG_BOOTMAPSZ entry

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Wed Apr 9 17:34:08 2008 +0200

    Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"

    Restore logic reverted by commit

    commit 80767a6cead9990d9e77e62be947843c2c72f469
    Author: Peter Pearse <peter.pearse@arm.com>
    Date:   Wed Sep 5 16:04:41 2007 +0100

	Changed API name to coloured_led.h
	Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
	Tidied other cpu/arm920t/start.S code

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Apr 8 10:24:24 2008 -0400

    Remove conflicting NAND ID

    There are two NAND entries with ID 0xDC and this obviously causes problems.
    In the kernel, they punted the first entry, so we should do the same.

    See this upstream e-mail for more info:
    http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html

    Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 188e94c370621708d13547d58dbc6ed3c5602aa8
Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Date:	Tue Apr 8 16:20:35 2008 +0900

    cpu/mips/cpu.c: Fix flush_cache bug

    Cache operations have to take line address (addr), not start_addr.
    I noticed this bug when debugging ping failure.

    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>

commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
Author: Martin Krause <martin.krause@tqs.de>
Date:	Thu Apr 3 14:29:01 2008 +0200

    TQM5200: fix default IDE reset level

    Before the first call of ide_reset(), the level of the IDE reset
    signal on the TQM5200 is low (reset asserted). This patch sets the
    default value to high (reset not asserted).

    Currently this patch fixes no real problem, but it is cleaner to
    assert the reset signal only on demand, and not permanently.

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit c61e033d6e8abb7b4060ee36060961e1399f6079
Author: Detlev Zundel <dzu@denx.de>
Date:	Thu Apr 3 14:18:48 2008 +0200

    mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
Author: Detlev Zundel <dzu@denx.de>
Date:	Thu Apr 3 14:18:47 2008 +0200

    mgcoge, mgsuv: rename 'addcon' to 'addcons'

    The latter name with 13 users is already established, so we will use
    that.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit e175eacc87c3a9e4dad0799fee0e95732520afc7
Author: Martin Krause <martin.krause@tqs.de>
Date:	Thu Apr 3 13:37:56 2008 +0200

    IDE: fix bug in reset sequence

    According to the ata (ata5) specification the RESET- signal
    shall be asserted for at least 25 us. Without this patch,
    the RESET- signal is asserted on some boards for only < 1 us
    (e. g. on the TQM5200). This patch adds a general delay of
    25 us to the RESET- signal.

    Without this patch a Platinum 4 GiB CF card is not recognised
    properly on boards with a TQM5200 (STK52xx, TB5200).

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit 813bea96a960916c72b4a3a7df840151529c26ce
Author: Sascha Laue <Sascha.Laue@gmx.biz>
Date:	Thu Apr 3 14:43:11 2008 +0200

    lwmon5: disable CONFIG_ZERO_BOOTDELAY

    Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>

commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Apr 2 08:03:58 2008 +0200

    ds174x: Fix warning on return in rtc_get and rtc_set functions

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit a253b38bf50c85227c33ca0febc870ee49d1588e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Apr 2 08:03:57 2008 +0200

    cmd_log.c: Fix assignment differ in signedness

    In function 'logbuff_init_ptrs':
    cmd_log.c:79: warning: pointer targets in assignment differ in signedness

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Date:	Wed Apr 2 11:04:43 2008 +0530

    Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c

    Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>

commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Apr 1 14:07:10 2008 +0200

    s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c08fb3ea36d19b1640b7906264581e9105534399
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Tue Apr 15 10:24:14 2008 +0200

    Additional PCI IDs for IDE and network controllers

    These PCI IDs are required by the Linkstation platforms.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit c0559be371b2a64b1a817088c3308688e2182f93
Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Date:	Mon Apr 14 23:01:50 2008 +0200

    Change env_get_char from a global function ptr to a function.

    This avoids an early global data reference.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 3e0f331c05d72f140715c1e9fca991927e44d422
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Tue Apr 29 12:35:08 2008 +0000

    Clean up smsc911x driver

    Replace direct register address derefencing with accessor functions.
    Restrict explicitly 32-bit bus-width, extend affected configurations
    respectively.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Tue Apr 15 00:08:20 2008 -0400

    This patch adds a driver for the following smsc network controllers:
    LAN9115
    LAN9116
    LAN9117
    LAN9215
    LAN9216
    LAN9217

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3dfd4aab929cccddb63d9ea509967861e1333b52
Author: Sascha Laue <Sascha.Laue@gmx.biz>
Date:	Tue Apr 1 15:13:03 2008 +0200

    Fix watchdog POST for lwmon5

    If the hardware watchdog detects a voltage error, the watchdog sets
    GPIO62 to low. The watchdog POST has to detect this low level.

    Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>

commit 24b448448a917e52806f82660a5c9d47608894fb
Author: Dave Liu <r63238@freescale.com>
Date:	Tue Apr 1 15:22:11 2008 +0800

    ata: update the libata.h from ata.h of linux kernel

    Current libata.h of u-boot is out of sync from linux kernel,
    this patch make it be consistent with linux kernel.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Tor Krill <tor@excito.com>

commit f8f9dc98883f66f59eb0601da65808e6b139c87c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Mar 31 11:59:27 2008 -0500

    Allow use of ARCH=powerpc when building

    The linux kernel is now mostly ARCH=powerpc, so to make life easier
    allow use to use ARCH=powerpc and convert it to ARCH=ppc.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Mon Mar 31 10:40:54 2008 +0900

    Add apollon board MAINTAINERS entry

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 77e475cc0ed1832160017d364be32a0be9ff02a9
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Mon Mar 31 10:40:36 2008 +0900

    Fix OneNAND read

    It should access with 16-bit instead of 8-bit

    Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit a9da2b41079d230db3a5641625311983f85ce1fb
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Mon Mar 31 10:40:19 2008 +0900

    Fix OneNAND erase command

    It mis-calculates the block address.
    Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 61525f2ffa156665a66908fda47dbf29d65ea579
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Mon Mar 31 01:32:15 2008 +0200

    Support for LinkStation / KuroBox HD and HG PPC models

    This patch is based on the port by Mihai Georgian (see linkstation.c for
    Copyright information) and implements support for LinkStation / KuroBox HD
    and HG PPC models from Buffalo Technology, whereby HD is deactivated at
    the moment, pending network driver fixing.

    Notice to users: this is pretty much a barebone port. Support for network
    on HG models is already in the U-Boot mainline, but you might also want
    patches to switch fan / phy modes depending on the negotiated ethernet
    parameters. This patch also doesn't support console switching, booting EM
    mode, Buffalo specific ext2 magic number. So, if you want to use any of
    those, you need additional patches. Otherwise this patche provides a fully
    functional u-boot with a network console on your system.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Sun Mar 30 01:22:13 2008 -0500

    Add CONFIG_MII_INIT support to related boards

    Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
    cmd_init.c. Add CONFIG_MII_INIT to board configuration files
    that use mii_init() in cmd_init.c.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Sun Mar 30 01:19:06 2008 -0500

    Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards

    Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
    CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit e99ccb488181d012248c6be30b2093e950319fc5
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Mar 27 11:46:38 2008 -0500

    Introduce phys_size_t and move phys_addr_t into asm/types.h

    Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
    that have larger physical addresses like 44x, 85xx, and 86xx.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 20a14a42a25f72e379f38460b8a8484667536795
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Apr 2 16:19:07 2008 -0500

    Rename include/md5.h to include/u-boot/md5.h

    Some systems have md5.h installed in /usr/include/. This isn't the
    desired file (we want the one in include/md5.h). This will avoid the
    conflict. This fixes the host tools building problem by creating a new
    directory for U-Boot specific header files.

    [Patch by Andy Fleming, modified to use separate directory by Wolfgang
    Denk]

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Andy Fleming <afleming@freescale.com>
    Acked-by: Timur Tabi <timur@freescale.com>

commit f297b7a1ec87433f66320d89d993e1bc738c66b8
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Mar 27 18:51:17 2008 +0800

    drivers: code clean up

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Mar 27 18:50:41 2008 +0800

    drivers: clean up the ata_piix.h

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit e8f7ba404f1409606962815ecc955a06984b08b3
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Mar 27 18:49:56 2008 +0800

    doc: english polishing for README.sata

    according to gvb's suggestion, polishing for the doc.

    Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 3e3f766a5274d204780460e1879723b565296d34
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Mar 26 18:53:28 2008 -0500

    Fix warnings introduced by I2C bus speed setting patch

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3c735e7437150e8615f26930c7819db85634276d
Author: eran liberty <eran.liberty@gmail.com>
Date:	Thu Mar 27 00:50:49 2008 +0100

    Altera Stratix II support

    Adds Support for Altera's Stratix II.

    Within your board specific init file you will have to call

    1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
    2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);

    Altera_desc* contines (for example):
	{
	 Altera_StratixII,	/* part type */
	 passive_serial,	/* interface type */
	 1,			/* bytes of data part can accept */
	 (void *)(&funcs),	/* interface function table */
	 0L,			/* base interface address */
	 0			/* implementation specific cookie */
	 }

    funcs is the interface. It is of type altera_board_specific_func.
    It looks like this:
    altera_board_specific_func func = {
	pre_fn,
	config_fn,
	status_fn,
	done_fn,
	clk_fn,
	data_fn,
	abort_fn,
	post_fn,
    };

    you will have to implement these functions, which is usually bit
    banging some gpio.

    Signed-off-by: Eran Liberty <liberty@extricom.com>

commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Apr 13 14:32:54 2008 -0700

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Wed Mar 26 20:41:17 2008 +0100

    Phytec Phycore-i.MX31 support

    This patch adds support for the Phytec Phycore-i.MX31 board

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Wed Mar 26 20:41:09 2008 +0100

    mx31 litekit support

    This patch adds support for the mx31 litekit board

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit cdace0661208754a53019ea0dc7b803a040e0939
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Wed Mar 26 20:40:49 2008 +0100

    add an i2c driver for mx31

    This patch adds an i2c driver for Freescale i.MX processors

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Wed Mar 26 20:40:42 2008 +0100

    core support for Freescale mx31

    This patch adds the core support for Freescale mx31

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 7ec68862a27c8f6f6d566228de8f6724d964a939
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Apr 13 14:19:23 2008 -0700

    Fix compile error

    ...as suggested by Peter Pearse

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Wed Mar 26 20:40:36 2008 +0100

    Separate omap24xx specific code from arm1136

    Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
    to cpu/arm1136/omap24xx.

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Jan 29 18:21:05 2008 -0500

    disable caches before booting an app for Blackfin apps

    It isn't generally save to execute applications outside of U-Boot with caches
    enabled due to the way the Blackfin processor handles caches (requires
    software assistance).  This patch disables caches before booting an ELF or
    just booting raw code.  The previous discussion on the patch was that we
    wanted to use weaks instead, but that proved to not be feasible when multiple
    symbols are involved, which puts us back at the ifdef solution.  I've
    minimized the ugliness by moving the setup step outside of the main function.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Apr 13 10:03:54 2008 -0700

    ppc: Get rid of unused machine type definitions

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Apr 13 09:59:26 2008 -0700

    Coding Style cleanup; update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
Author: Larry Johnson <lrj@acm.org>
Date:	Thu Feb 21 13:58:11 2008 -0500

    LM73 bug fix for negative temperatures and cleanup

    When the LM73 temperature sensor measures a temperature below 0 C, the
    current driver does not perform sign extension, so the result returned is
    512 C too high.  This patch fixes the problem, and does general cleanup
    of the code.

    Signed-off-by: Larry Johnson <lrj@acm.org>

commit 96ef831f713289afba19da0c8f905e99da2b23e0
Author: Guennadi Liakhovetski <lg@denx.de>
Date:	Thu Apr 3 13:36:02 2008 +0200

    cfi_flash: Support buffered writes on non-standard Spansion NOR flash

    Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
    series require different addresses for buffered write commands. Define a
    configuration option to support buffered writes on those chips. A more
    elegant solution would be to automatically detect those chips by parsing
    their CFI records, but that would require introduction of a fixup table
    into the cfi_flash driver.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
Author: Lee Nipper <lee.nipper@freescale.com>
Date:	Thu Apr 10 09:35:06 2008 -0500

    mpc83xx: Update DIMM data bus width test to support 40-bit width

    32-bit wide ECC memory modules report 40-bit width.
    Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.

    Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 5fb5a689d822ca61e814bd523fc930af335242fa
Author: Dave Liu <r63238@freescale.com>
Date:	Mon Mar 31 17:05:12 2008 +0800

    mpc83xx: Fix the bug of serdes initialization

    Currently the serdes will not be initializated due to the
    partid's error.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 2000784818f043db7ca60e2846a72d097766b894
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Apr 3 16:28:29 2008 +0800

    mpc83xx: Fix the SATA clock setting of 837x targets

    Currently the SATA controller clock is configured as CSB clock,
    usually the CSB clock is 400/333/266MHz.

    However, The SATA IP block is only guaranteed to operate up to
    200 MHz as stated in the HW spec.

    The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>

    This patch makes the SATA clock as half of CSB clock.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Apr 2 13:41:21 2008 +0200

    mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Apr 9 04:20:57 2008 -0500

    85xx: Fix detection of MP cpu spin up

    We were looking at the wrong memory offset to determine of a secondary
    cpu had been spun up or not.  Also added a warning message if the
    all the secondary cpus we expect don't spin up.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f3e04bdc3f360c66801a9048956e61e41a16edba
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Apr 8 10:45:50 2008 -0500

    85xx: Use SVR_SOC_VER instead of SVR_VER

    The recent change introduced by 'Update SVR numbers to expand support'
    now requires that we use SVR_SOC_VER instead of SVR_VER if we want
    to compare against a particular processor id.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
Date:	Fri Apr 11 10:00:35 2008 -0400

    ppc4xx: Fix power mgt definitions for PPC440

    Corrected DCR addresses of PPC440EP power management registers.

    Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>

commit 950a392464e616b4590bc4501be46e2d7d162dea
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Apr 11 15:11:26 2008 +0200

    Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

    Reverting became necessary after it turned out that the patches in
    the u-boot-arm repo were modified, and in some cases corrupted.

    This reverts the following commits:

	066bebd6353e33af3adefc3404560871699e9961
	7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
	c88ae20580b2b01487b4cdcc8b2a113f551aee36
	a147e56f03871bba4f05058d5e04ce7deb010b04
	d6674e0e2a6a1f033945f78838566210d3f28c95
	8c8463cce44d849e37744749b32d38e1dfb12e50
	c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
	8bf69d81782619187933a605f1a95ee1d069478d
	8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
	a574a73852a527779234e73e17e7597fd8128882
	1377b5583a48021d983e1fd565f7d40c89e84d63
	1704dc20917b4f71e373e2c888497ee666d40380

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
Author: Stefan Roese <sr@denx.de>
Date:	Fri Apr 11 07:02:29 2008 +0200

    ppc4xx: Update Kilauea defconfig to use device-tree booting as default

    This patch reworks the default environment on Kilauea/Haleakala. Now
    "net_nfs" for exmaple uses the device-tree style booting formerly know
    as "net_nfs_fdt". Also the addresses in RAM were changed because of the
    new image booting support, which check for image overwriting. So the
    addresses needed togeet adjusted.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 9 11:58:02 2008 +0200

    ppc4xx: Fix Canyonlands default environment to work with new image support

    Since the new image support checks for image overwriting, the default
    environment needs to get adjusted to use correct addresses.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit dfc6c7b647dba7ab86749616f0e9e5740deed422
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 9 11:54:11 2008 +0200

    ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE

    The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
    closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
    on 4xx systems _start currently cannot be used for this calculation.
    So revert back to the original version for now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f91374f65eae8b42cac329e06ba1c54728278efb
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 12:49:52 2008 +0100

    microblaze: Sort microblaze boards in MAKEALL script

commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 11:58:45 2008 +0100

    microblaze: clean microblaze_config.mk

    FLAGS are generated by U-BOOT generator.
    Board specific FLAGS are in board directory

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 12:47:19 2008 +0100

    microblaze: xupv2p fix config file for supporting FDT

commit 188dc16b189143573b1ed90e584bf866d75cdd12
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 11:53:02 2008 +0100

    microblaze: ml401 fix config file for supporting FDT

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 4c6a6f02e239236261333759997eeaf86b30b54c
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 11:22:48 2008 +0100

    microblaze: ml401 - add ifdef for GPIO

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 12:13:03 2008 +0100

    microblaze: clean uart16550 and uartlite handling

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 0b20f250877441460fb79d72192954abe8498834
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 11:08:31 2008 +0100

    microblaze: Add Emaclite driver to Makefile

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 868cde5310f88234b774878e4f06e79df10a88b3
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 11:08:01 2008 +0100

    microblaze: Add Emac driver to Makefile

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 12:42:29 2008 +0100

    microblaze: add Emac ethernet driver

commit 89c53891b18cbafd29ab8931b40e27ad231b6085
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 12:41:56 2008 +0100

    microblaze: add Emaclite ethernet driver

commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 11:04:01 2008 +0100

    microblaze: ML401 and XUPV2P remove emac and emaclite reference

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 10:59:32 2008 +0100

    microblaze: remove old setting for emac driver

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 28 10:58:15 2008 +0100

    microblaze: Clean Makefile from ancient emac driver

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit ab68f921d9c741830f721c3d879c13a0c5597183
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 10:20:43 2008 +0100

    SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 6ed8a43a19bb0275501bc286007daafa923552cf
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Mar 26 23:38:48 2008 +0100

    SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Mar 26 23:34:47 2008 +0100

    SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 10:06:52 2008 +0100

    SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Mar 26 23:26:48 2008 +0100

    SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 10:00:33 2008 +0100

    SPARC: Added support for SPARC LEON2 SOC Processor.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Mar 26 23:00:38 2008 +0100

    SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Mar 26 22:51:29 2008 +0100

    SPARC: Added support for SPARC LEON3 SOC processor.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit bf3d8b31169546fcddb4737391e1893fb12d033a
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 08:29:26 2008 +0100

    SPARC: added SPARC support for new uimage in common code.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 00ab32c85405a4fe65fd4128243086210fc90a21
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Wed Mar 26 22:36:03 2008 +0100

    SPARC: added SPARC board information to the command bdinfo.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit c2f02da21a3f37f0878554eebc785e04fdc4e128
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 09:47:00 2008 +0100

    SPARC: Added generic support for SPARC architecture.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit e54ec0f016803e4d9524ff71f7971bda0c51b287
Author: Stefan Roese <sr@denx.de>
Date:	Thu Apr 3 14:50:34 2008 +0200

    ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3

    This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
    has 2 RGMII instances and we need to configure the 2nd RGMII instance
    for the EMAC2+3 channels.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c2a545ce33b26d80337f80b533828839249fb1c9
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Wed Apr 2 08:03:56 2008 +0200

    MPC8xx: Fix libfdt support introduced in commit 77ff7b74

    fdt.c: In function 'ft_cpu_setup':
    fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
    fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
    fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
    fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
Author: Andy Fleming <afleming@freescale.com>
Date:	Mon Mar 31 20:45:56 2008 -0500

    Fix fdt set command to conform to dts spec

    The fdt set command was treating properties specified as <00> and <0011>
    as byte streams, rather than as an array of cells.	As we already have
    syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
    we should use the <> syntax to describe arrays of cells, which are always
    32-bits per element.  If we imagine this likely (IMHO) scenario:

    > fdt set /ethernet-phy@1 reg <1>

    With the old code, this would create a bad fdt, since the reg cell would be
    made to be one byte in length.  But the cell must be 4 bytes, so this would
    break mysteriously.

    Also, the dts spec calls for constants inside the angle brackets (<>)
    to conform to C constant standards as they pertain to base.
    Take this scenario:

    > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>

    The old fdt command would complain that it couldn't parse that.  Or, if you
    wanted to specify that a certain clock ran at 33 MHz, you'd be required to
    do this:

    > fdt set /mydev clock <1f78a40>

    Whereas the new code will accept decimal numbers.

    While I was in there, I extended the fdt command parser to handle property
    strings which are split across multiple arguments:

    > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
    > fdt p /ethernet@f00
    ethernet@f00 {
	interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
    };

    Lastly, the fdt print code was rearranged slightly to print arrays of cells
    if the length of the property is a multiple of 4 bytes, and to not print
    leading zeros.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 2 08:39:33 2008 +0200

    ppc4xx: Canyonlands: Init SATA/PCIe port correctly

    Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
    interface. This usage can be configured with the jumper J6. This patch
    correctly configures the SATA/PCIe PHY for SATA usage when this jumper
    is installed.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6fe2946f198481254a6ee9600d7456b8316a4083
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Fri Mar 28 17:37:49 2008 -0500

    remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code

    finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
    "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
    started.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b5873f1732b92a25690e1513b90dfb0d644f6697
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Tue Apr 1 07:30:51 2008 +0200

    dataflash: Move CONFIG_HAS_DATAFLASH to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 2d934ea51f276522b532f870a820e844ff480b5b
Author: Tor Krill <tor@excito.com>
Date:	Fri Mar 28 15:29:45 2008 +0100

    Add Vitesse 8601 support to TSEC driver

    Add phy_info for Vitesse VSC8601.
    Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.

    Signed-off-by: Tor Krill <tor@excito.com>
    Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Mon Mar 31 14:25:00 2008 +0000

    SPARC: added SMC91111 driver in and out macros for LEON processors.

    This patch makes SPARC/LEON processors able to read and write
    to the SMC91111 chip using the chip external I/O bus of the memory
    controller. This patchs defines the standard in and out macros
    expected by the SMC9111 driver.

    To access that I/O bus one must set up the memory controller
    (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
    up this correctly when the other MCTRL parameters are set up. It
    can be set up from the board configuration header file.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 18:52:34 2008 +0100

    Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Mar 31 21:31:04 2008 +0200

    AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 18:52:33 2008 +0100

    Add support for AT91SAM9260EK

    Support for booting from internal DataFlash, external DataFlash card
    or NAND flash is available.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 1762f13b4aab88b685b1722f17dada247945624b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Mar 31 21:20:49 2008 +0200

    AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 761712188b353494defb2b644491ff73d0daaa6f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Mar 31 21:12:17 2008 +0200

    AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 20:52:32 2008 +0100

    Port AT91CAP9 to the new headers

    Adapt the existing AT91CAP9 code to the new headers and APIs.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 19:52:31 2008 +0100

    Finish header files reworking

    Replace AT91CAP9.h file with several splitted header files coming
    from the Linux kernel.

    This is part 2 of the replacement: more header imports and edits.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 19:52:30 2008 +0100

    Import several header files from Linux

    Replace AT91CAP9.h file with several splitted header files coming
    from the Linux kernel.

    This is part 1 of the replacement: pristine header files import.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit a8a78f2d99dc1bd30dc3595da118539b506c6118
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 20:52:28 2008 +0100

    Move at91cap9 specific files to at91sam9 directory

    AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
    common infrastructure can be used. Let this infrastructure be
    named after the AT91SAM9 family, and move the existing AT91CAP9
    files to the new place.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 61106a565870ff503f92b251b94bd7afef889a04
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 21:52:27 2008 +0100

    Use timer_init() instead of board supplied interrupt_init()

    The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
    the board, so use timer_init() instead of interrupt_init().

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 21:52:36 2008 +0100

    Cleanup DataFlash partition handling

    DataFlash partition information has become a mess. This patch
    defines a single partition scheme for Atmel DataFlashes. This partition
    scheme will be used by all AT91CAP9 and AT91SAM9 boards.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Fri Mar 28 08:47:45 2008 -0500

    ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S

    When the version_string function in start.S is not 4-byte align,
    it will cause the compiler generates "unaligned opcodes detected
    in executable segment". This issue affects all ColdFire CPUs.
    By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
    it is not aligned.

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit bae61eefe15b4d454060a7140e49ae58322be803
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Mar 25 15:41:15 2008 -0500

    ColdFire: Add dspi and serial flash support for MCF5445x

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit 48ead7a7a922fceaf494e352abfab8216a41b417
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Tue Mar 18 17:37:01 2008 -0500

    ColdFire: Remove R5200 board

    This board never went into production

    Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
    Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
Author: Matthew Fettke <[matthew.fettke@gmail.com]>
Date:	Thu Jan 24 14:02:32 2008 -0600

    ColdFire: Added M5275EVB support.

    Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
Author: Matthew Fettke <[matthew.fettke@gmail.com]>
Date:	Mon Feb 4 15:38:20 2008 -0600

    ColdFire: Added MCF5275 cpu support.

    Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Mar 17 12:14:11 2008 -0500

    ColdFire: Define bootdelay in configuration file for M52277EVB

    Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
    Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit 77878f16cedee17161ff2336990970fffc6cea35
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Mar 17 12:09:07 2008 -0500

    ColdFire: Fix second memory Chipselect for M5475EVB

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit 43d60642395a550956cb21d287c8cfa563913d28
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Thu Mar 13 14:26:32 2008 -0500

    ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Acked-by: John Rigby <jrigby@freescale.com>

commit eb14ebe813a0cb5d47905228da446a5ad692473b
Author: Larry Johnson <lrj@acm.org>
Date:	Sun Mar 30 20:33:04 2008 -0500

    ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup

    Signed-off-by: Larry Johnson <lrj@acm.org>

commit 02e3892021112f21067d9ed1d04ae4182725ba52
Author: Stefan Roese <sr@denx.de>
Date:	Mon Mar 31 12:20:48 2008 +0200

    ppc4xx: Small whitespace fix of esd patches

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 034394abb524785047c815f00dde8cdbdc1593c5
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Sun Mar 30 18:52:44 2008 +0200

    ppc4xx: Cleanup PMC440 board support

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit a6cc6c37188d85c25d167a4515da86f48d9a583e
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Sun Mar 30 18:52:06 2008 +0200

    ppc4xx: Add ptm configuration variables for PMC440

    Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
    environment variables.

    Cleanup pci_target_init.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 7c91f51a2fe296909147f1646a1412729dd10b1d
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Sun Mar 30 18:01:15 2008 +0200

    ppc4xx: Minor updates for DU440 boards

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit d5bffeb868d6b4d462f558dac43011027b6644b7
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Feb 19 00:54:20 2008 -0500

    Blackfin: cleanup and overhaul common board init functions

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit b86b3416f874358acaf07519e7620cdb2145f75b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Feb 19 00:50:58 2008 -0500

    Blackfin: cleanup lib_blackfin/cache.c

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Mar 30 15:46:13 2008 -0400

    Blackfin: unify cpu and boot modes

    All of the duplicated code for Blackfin processors and boot modes have been
    unified.  After all, the core is the same for all processors, just the
    peripheral set differs (which gets handled in the drivers).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 880cc4381ea8360248cddcdf87a64566745a5724
Author: Stelian Pop <stelian@popies.net>
Date:	Wed Mar 26 22:52:35 2008 +0100

    Fix CFG_NO_FLASH compilation.

    Many Atmel boards have no "real" (NOR) flash on board, and rely only
    on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
    be present in a board configuration file, while still enabling flash
    commands like 'flinfo', 'protect', etc.

    Signed-off-by: Stelian Pop <stelian@popies.net>

commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Feb 19 00:58:13 2008 -0500

    Blackfin: BF537-stamp: cleanup spi flash driver

    This punts the old spi flash driver for a new/generalized one until the
    common one can be integrated.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Sun Mar 30 11:34:34 2008 -0400

    Fix macro typo in common/cmd_mii.c

    This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206.  I
    actually applied the wrong patch.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Mar 30 16:39:53 2008 +0200

    use correct at91rm9200 register name in m501sk board

    This fixes a naming bug for at91rm9200 lowlevel init code:
    NOR boot flash is on chipselect 0, not chipselect 2.  This
    makes code use the register name from chip datasheets.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
Author: David Brownell <david-b@pacbell.net>
Date:	Fri Jan 18 12:55:00 2008 -0800

    use correct at91rm9200 register name

    This fixes a naming bug for at91rm9200 lowlevel init code:
    NOR boot flash is on chipselect 0, not chipselect 2.  This
    makes code use the register name from chip datasheets.

    Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

commit a3543d6dc52b0ba9c64016687cf32d600b31a476
Author: David Brownell <david-b@pacbell.net>
Date:	Fri Jan 18 12:45:45 2008 -0800

    add missing ARM boards to MAKEALL

    Add some missing ARM boards to MAKEALL.  These build correctly,
    unlike several of the boards already listed.

    Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

commit 066bebd6353e33af3adefc3404560871699e9961
Author: Peter Pearse <peter.pearse@arm.com>
Date:	Sun Mar 30 11:34:09 2008 +0100

    Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
    to prevent compilation error.

    Signed-off-by: Peter Pearse <peter.pearse@arm.com>

commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
Author: Guennadi Liakhovetski <[lg@denx.de]>
Date:	Sun Mar 30 11:32:30 2008 +0100

    Support for the MX31ADS evaluation board from Freescale

    This patch adds support for the MX31ADS evaluation board from Freescale,
    initialization code is copied from RedBoot sources, also provided by Freescale.

    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Sun Mar 30 11:32:27 2008 +0100

    Phytec Phycore-i.MX31 support

    This patch adds support for the Phytec Phycore-i.MX31 board

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit a147e56f03871bba4f05058d5e04ce7deb010b04
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Sun Mar 30 11:32:24 2008 +0100

    mx31 litekit support

    This patch adds support for the mx31 litekit board

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit d6674e0e2a6a1f033945f78838566210d3f28c95
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Sun Mar 30 11:32:21 2008 +0100

    add SMSC LAN9x1x Network driver

    This patch adds a driver for the following smsc network controllers:
    LAN9115
    LAN9116
    LAN9117
    LAN9215
    LAN9216
    LAN9217

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 8c8463cce44d849e37744749b32d38e1dfb12e50
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Sun Mar 30 11:32:16 2008 +0100

    add an i2c driver for mx31

    This patch adds an i2c driver for Freescale i.MX processors

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Sun Mar 30 11:30:43 2008 +0100

    core support for Freescale mx31

    This patch adds the core support for Freescale mx31

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 8bf69d81782619187933a605f1a95ee1d069478d
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:	Sun Mar 30 11:28:46 2008 +0100

    Separate omap24xx specific code from arm1136

    Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
Author: Peter Pearse <peter.pearse@arm.com>
Date:	Sun Mar 30 11:23:05 2008 +0100

    Add pmdra into MAKEALL

    Signed-off-by: Peter Pearse <peter.pearse@arm.com>

commit a574a73852a527779234e73e17e7597fd8128882
Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
Date:	Sun Mar 30 11:21:58 2008 +0100

    Adds support for the Prodrive PMDRA board, based on a DM6441

    Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>

commit 1377b5583a48021d983e1fd565f7d40c89e84d63
Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
Date:	Sun Mar 30 11:11:34 2008 +0100

    Removes all board specific code from the arch. part for DM644x (DaVinci) boards

    Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>

commit 1704dc20917b4f71e373e2c888497ee666d40380
Author: Dirk Behme <dirk.behme@gmail.com>
Date:	Sun Mar 30 11:09:01 2008 +0100

    - Remove *_masked() functions as noted by Wolfgang
    - Adapt register naming to recent TI spec (sprue26, March 2007)
    - Fix reset_timer() handling
    - As reported by Pieter [1] the overflow fix introduced a
    delay of factor 16 (e.g 2 seconds became 32). While the
    overflow fix is basically okay, it missed to divide udelay by
    16, too. Fix this.
    [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
    - Remove software division of timer count value (DIV(x)
    macro) and do it in hardware (TIM_CLK_DIV).
    Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
    and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
    the hints & testing!

    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>

    Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>

commit ac3315c26e143c31680750c9c13f027efbcc887e
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:	Thu Mar 6 16:45:44 2008 +0100

    new PHY @ e1000 - 2nd try

    Add 82541ER device with latest integrated IGP2 PHY.
    Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 20:22:53 2008 +0100

    SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.

    GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
    a debug link (EDCL). The GRETH core is documented in GRIP.pdf
    available at www.gaisler.com.

    If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
    offloading etc.) can be determined by a bit in the control register.
    The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 233a8bcd94997f3f345833a3b82e836222f2a206
Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Mar 17 17:08:22 2008 -0500

    Add CONFIG_MII_INIT in cmd_mii.c

    Provide common configuration in do_mii() to execute mii_init()
    for all cpu architectures

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit f605479de2deb11e834f31dfdb0af107c86aced6
Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
Date:	Mon Mar 17 17:08:16 2008 -0500

    ColdFire: Fix FEC transmit issue for MCF5275

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
Author: Aras Vaichas <arasv@magtech.com.au>
Date:	Wed Mar 26 09:43:57 2008 +1100

    DHCP request fix for Windows Server 2003

    Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
    delay before sending "DHCP Request" in net/bootp.c. Required to overcome
    interoperability problems with Windows Server 200x DHCP server when U-Boot
    client responds too fast for server to handle.

    Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 97bf85d784fbed485e652eb907589ad0d5cb7262
Author: Daniel Hellstrom <daniel@gaisler.com>
Date:	Fri Mar 28 20:40:19 2008 +0100

    MTD/CFI: flash_read64 is defined a weak function (for SPARC)

    SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
    SPARC CPUs implement flash_read64 which calls __raw_readq.

    For current SPARC architectures (LEON2 and LEON3) each read from the
    FLASH must lead to a cache miss. This is because FLASH can not be set
    non-cacheable since program code resides there, and alternatively disabling
    cache is poor from performance view, or doing a cache flush between each
    read is even poorer.

    Forcing a cache miss on a SPARC is done by a special instruction "lda" -
    load alternative space, the alternative space number (ASI) is processor
    implementation spcific and can be found by including <asm/processor.h>.

    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 70431e8a7393b6b793f77957f95b999fc9a269b8
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:	Fri Mar 28 15:41:25 2008 +0100

    Make MPC83xx one step closer to full relocation.

    Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
    and use GOT relative reference.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 5b2793a3f3de34d439232b05acc8af67a028fd35
Author: Michael Barkowski <michael.barkowski@freescale.com>
Date:	Thu Mar 27 14:34:43 2008 -0400

    mpc8323erdb: fix EEPROM page size and get MAC from EEPROM

    This patch fixes eeprom page size so that you can now write more than
    64 bytes at a time.

    It also makes the board take MAC addresses, if found, from EEPROM.

    User should place up to 4 addresses at offset 0x7f00, for
    eth{,1,2,3}addr.  Any unused addresses should be zero.  This group of
    four six-byte values should have it's CRC at the end.  crc32 and
    eeprom commands can be used to accomplish this.

    If CRC fails, MAC addresses come from the environment.  If CRC
    succeeds, the environment is overwritten at startup.

    Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 8f325cff31f6e745e6540014b131b9a97f61944c
Author: Michael Barkowski <michael.barkowski@freescale.com>
Date:	Fri Mar 28 15:15:38 2008 -0400

    mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE

    Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
    controller on the PCI bus in Linux on the MPC8323ERDB.

    This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
    config file.

    Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Fri Mar 28 10:19:07 2008 -0500

    mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code

    in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
    85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
    and processor ID display.  Add REVID_{MAJ,MIN}OR macros to make
    REVID dependent code simpler.  Also added PARTID_NO_E and IS_E_PROCESSOR
    convenience macros.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Fri Mar 28 10:18:53 2008 -0500

    mpc83xx: display ddr frequency in board_add_ram_info banner

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Fri Mar 28 10:18:40 2008 -0500

    mpc83xx: unreinvent mem_clk

    delete ddr_clk and use mem_clk instead.  Rename other ddr_*_clk to
    mem_*_clk for consistency's sake.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Fri Mar 28 14:31:23 2008 -0500

    mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:57:19 2008 +0800

    mpc83xx: enable the SATA interface on mpc837xemds board

    Enable the first two SATA interfaces on MPC837xEMDS board,
    The two SATA ports are on LYNX1. (SATA0/1 on J4/5)

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:56:36 2008 +0800

    mpc83xx: initialize serdes for MPC837xEMDS boards

    This patch is stolen from Anton Vorontsov's patch
    for mpc837xerdb boards.

    The reference clk and xcorevdd voltage of serdes1/2
    is same between mpc837xemds and mpc837xerdb.

    8377E: LYNX1- 2 SATA	LYNX2- 2 PCIE
    8378E: LYNX1- 2 SGMII	LYNX2- 2 PCIE
    8379E: LYNX1- 2 SATA	LYNX2- 2 SATA

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit cc8e839abc80887ae832767b5930d40edd6d7eb7
Author: Stefan Roese <sr@denx.de>
Date:	Fri Mar 28 14:09:04 2008 +0100

    ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision

    Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
    interface. This usage can be configured with the jumper J6. This patch
    displays the current configuration upon bootup and changes the PCIe
    init loop, to only initialize the availabel PCIe slots.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 90447ecbbac8572457b6d8903073ac3f120995ba
Author: Tor Krill <tor@excito.com>
Date:	Fri Mar 28 11:29:10 2008 +0100

    MTD/CFI: Add support for 16bit legacy AMD flash

    Add entry for 512Kx16 AMD flash to jedec_table.
    Read out 16bit device id if chipwidth is 16bit.
    Fixed coding style after Stefans feedback

    Signed-off-by: Tor Krill <tor@excito.com>

commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
Author: Stefan Roese <sr@denx.de>
Date:	Fri Mar 28 11:02:53 2008 +0100

    ppc: Small change to CFG_MEM_TOP_HIDE description

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Thu Mar 27 15:44:12 2008 +0900

    sh: Add support stat structure and stat.h

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
Author: Mark Jonas <toertel@gmail.com>
Date:	Sat Mar 22 19:27:52 2008 +0100

    sh: Removed warning when compiling drivers/serial/serial_sh.c.

    Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f309fa38929ffba71230c02330ffa42f4bba6333
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Wed Mar 12 18:02:57 2008 +0900

    sh: Remove disable_ctrlc function from R7780MP

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Wed Mar 12 17:55:15 2008 +0900

    sh: Add maintainer of R7780MP to MAINTAINER file

    Update MAINTAINER entry for R7780MP. And fix maintainer's name.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f5e2466f7baa887a7df0c536333eea8231333497
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Tue Mar 25 17:11:24 2008 +0900

    sh: Add support Renesas Solutions R2D plus board

    R2D plus is SH reference board used with SH7751R.
    This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
    one PCI bus, VGA, and two Ethernet controller.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit e92c95180bb5bc5fd4051598a9d60beaba48988d
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Wed Mar 12 12:15:29 2008 +0900

    sh: Add support SH4 cache control

    Add support SH4 cache control and flash_cache function

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 28e5efde4d925fcb34901d0030d0648de2da7e89
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Mon Mar 24 01:53:01 2008 +0900

    sh: Add support PCI host driver for SH7751/SH7751R

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Mon Mar 24 02:11:26 2008 +0900

    sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 566933278101c144d75361ea682678a326c1290d
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Wed Mar 12 12:10:28 2008 +0900

    sh: Add support SuperH SH7751/SH7751R

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 3313e0e26224fc9a0c445124f3455058c696df84
Author: Mark Jonas <toertel@gmail.com>
Date:	Mon Mar 10 11:37:10 2008 +0100

    sh: Added support for SH7720 based board MPR2.

    Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Thu Mar 6 14:05:53 2008 +0900

    sh: Fix receive FIFO level register of SH4A

    Receive FIFO level register is different in SH4A.
    Because register is different, cannot occasionally receive data.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c133c1fb0b590662206b0eba70f4478ee0300a9a
Author: Yusuke Goda <goda.yusuke@renesas.com>
Date:	Tue Mar 11 12:55:12 2008 +0900

    sh: Add support Renesas Solutions R7780MP

    Renesas Solutions R7780MP is a reference board on SH7780.
    This board has serial, 10/100 base Ethernet deivice, CF slot
    and VGA devices. This board can set extension board.
    Extension board has 10/100/1000 base Ethernet device, PCI slot,
    S-ATA, iDVR slot.

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
Author: Yusuke Goda <goda.yusuke@renesas.com>
Date:	Wed Mar 5 14:30:02 2008 +0900

    sh: Add support PCI of SuperH and SH7780

    This patch add support PCI of SuperH base code and SH7780 specific code.

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit b55523efff2ae11f0b9ae3cc405893c32eb78156
Author: Yusuke Goda <goda.yusuke@renesas.com>
Date:	Wed Mar 5 14:23:26 2008 +0900

    sh: Add support SH7780

    SH7780 is CPU of Renesas Technology.
    This CPU has
     - CPU clock 400MHz
     - PCI support
     - DDR-SDRAM controller
     - etc ...

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit c2042f5952a686c414031309b8f244513bf578f0
Author: goda.yusuke <goda.yusuke@renesas.com>
Date:	Fri Jan 25 20:46:36 2008 +0900

    sh: Add support Renesas Solutions Migo-R board

    Migo-R is a board based on SH7722 and has may devices.
    In this patch, supported SCIF, NOR flash and Ethernet.

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 27 15:06:40 2008 +0100

    Fix host tool build breakage, take two

    Revert commit 87c8431f and fix build breakage so that the build continues
    to work on FC systems.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 19 09:36:47 2008 +0100

    ppc4xx: Enable ECC on LWMON5

    Since all ECC related problems seem to be resolved on LWMON5, this patch
    now enables ECC support.

    We have to write the ECC bytes by zeroing and flushing in smaller
    steps, since the whole 256MByte takes too long for the external
    watchdog.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
Author: Larry Johnson <lrj@acm.org>
Date:	Mon Mar 17 11:10:35 2008 -0500

    ppc4xx: Updates to Korat-specific code

    This patch contains updates for changes for the Korat PPC440EPx board.
    These changes include:

    (1) Support for "permanent" and "upgradable" copies of U-Boot, as
    described in the new "doc/README.korat" file;

    (2) a new memory map for the registers in the board's CPLD;

    (3) a revised format for manufacturer's data in serial EEPROM; and

    (4) changes to track updates to U-Boot for the Sequoia board.

    Signed-off-by: Larry Johnson <lrj@acm.org>

commit f766cdf89b3a2a7634b8c5869f606150e332036c
Author: Markus Brunner <super.firetwister@gmail.com>
Date:	Thu Mar 27 10:46:25 2008 +0100

    ppc4xx: PPC405EP Set EMAC noise filter bits

    This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
    which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
    disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.

    Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
Author: Mike Nuss <mike@terascala.com>
Date:	Wed Feb 20 11:54:20 2008 -0500

    ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx

    On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
    after startup to change the speed of the clocks. This patch adds the
    option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
    initialization code will reconfigure the PLL to run the system with a CPU
    frequency of 667MHz and PLB frequency of 166MHz, without the need for an
    external EEPROM.

    Signed-off-by: Mike Nuss <mike@terascala.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date:	Thu Mar 27 09:12:40 2008 +0100

    new-image: Fix host tool build breakage

    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit 6fb4b640562a10daff0dbe537638d511b5b48650
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 27 10:24:03 2008 +0100

    ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9462732a3ec551c11862450902cd8ee1bedea6d9
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 19 10:23:43 2008 +0100

    ppc4xx: Add fdt support to Prodrive alpr

    Since this board will probably be ported to arch/powerpc in the
    near future, we add device tree support now. This way we are
    "ready" for arch/powerpc from now on.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
Date:	Mon Mar 17 09:27:56 2008 +0100

    ppc4xx: Enable cache support on the ALPR board

    Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>

commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 26 10:14:11 2008 +0100

    ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"

    If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
    memory area will get subtracted from the top (end) of ram and won't get
    "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
    should gets passed the now "corrected" memory size and won't touch it
    either. This should work for arch/ppc and arch/powerpc. Only Linux board
    ports in arch/powerpc with bootwrapper support, which recalculate the
    memory size from the SDRAM controller setup, will have to get fixed
    in Linux additionally.

    This patch enables this config option on some PPC440EPx boards as a workaround
    for the CHIP 11 errata. Here the description from the AMCC documentation:

    CHIP_11: End of memory range area restricted access.
    Category: 3

    Overview:
    The 440EPx DDR controller does not acknowledge any
    transaction which is determined to be crossing over the
    end-of-memory-range boundary, even if the starting address is
    within valid memory space. Any such transaction from any PLB4
    master will result in a PLB time-out on PLB4 bus.

    Impact:
    In case of such misaligned bursts, PLB4 masters will not
    retrieve any data at all, just the available data up to the
    end of memory, especially the 440 CPU. For example, if a CPU
    instruction required an operand located in memory within the
    last 7 words of memory, the DCU master would burst read 8
    words to update the data cache and cross over the
    end-of-memory-range boundary. Such a DCU read would not be
    answered by the DDR controller, resulting in a PLB4 time-out
    and ultimately in a Machine Check interrupt. The data would
    be inaccessible to the CPU.

    Workaround:
    Forbid any application to access the last 256 bytes of DDR
    memory. For example, make your operating system believe that
    the last 256 bytes of DDR memory are absent. AMCC has a patch
    that does this, available for Linux.

    This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
    lwmon5, korat, sequoia

    The other remaining 440EPx board were intentionally not included
    since it is not clear to me, if they use the end of ram for some
    other purpose. This is unclear, since these boards have CONFIG_PRAM
    defined and even comments like this:

    PMC440.h:
    /* esd expects pram at end of physical memory.
     * So no logbuffer at the moment.
     */

    It is strongly recommended to not use the last 256 bytes on those
    boards too. Patches from the board maintainers are welcome.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 27 10:09:05 2008 +0100

    ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d56a3ce179688cde61073a3690e21703d68fafd7
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 25 17:51:13 2008 +0100

    ppc4xx: Correctly pass phyiscal FLASH base address into dtb

    The routine ft_board_setup() configures the EBC NOR mappings for the
    Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
    0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
    problem, we need to pass the corrected address here too.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 9ad31989de12ce5c67b07c4867ead47465655c4b
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 19 16:35:12 2008 +0100

    ppc4xx: Fix compilation warning in 4xx_enet.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 19 16:20:49 2008 +0100

    ppc4xx: Add AMCC Glacier 406GT eval board support

    This patch adds support for the AMCC Glacier 460GT eval board.
    The main difference to the Canyonlands board are listed here:

    - 4 ethernet ports instead of 2
    - no SATA port
    - no USB port

    Currently EMAC2+3 are not working. This will be fixed in a later
    release.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 27 08:47:26 2008 +0100

    ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear

    Signed-off-by: Stefan Roese <sr@denx.de>

commit b9670dd85be6e0496ef2e231043c23cad9b1d903
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Mar 26 21:05:43 2008 +0100

    Fix out of tree building issue

    Currently U-Boot building in some external directory
    doesn't work. This patch tries to fix the problem.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Mar 26 18:13:33 2008 +0100

    README: update documentation (availability, links, etc.)

    Fix typo in README

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Mar 26 17:47:44 2008 +0100

    Fix compilation error in cmd_usb.c

    This patch fixes compilation error
    cmd_usb.c: In function 'do_usb':
    cmd_usb.c:552: error: void value not ignored as it ought to be

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit d8c82db482d6b535d12b419d6440b88bf7091c9b
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Mar 14 17:45:29 2008 -0500

    Add support for setting the I2C bus speed in fsl_i2c.c

    Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
    the I2C bus speed.	Current 8[356]xx boards define the CFG_I2C_SPEED macro,
    but fsl_i2c.c ignores it and uses conservative value when programming the
    I2C bus speed.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>

commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Mar 27 00:03:57 2008 +0100

    Coding style cleanup, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:55:32 2008 +0800

    drivers: add the support for Freescale SATA controller

    Add the Freescale on-chip SATA controller driver to u-boot,
    The SATA controller is used on the 837x and 8315 targets,
    The driver can be used to load kernel, fs and dtb.

    The features list:
    - 1.5/3 Gbps link speed
    - LBA48, LBA28 support
    - DMA and FPDMA support
    - Two ports support

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:54:44 2008 +0800

    ata: add the readme for SATA command line

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit cd54081cd479e542fc399b8a40651ff11a1ad849
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:53:24 2008 +0800

    ata: enable the sata initialize on boot up

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:52:36 2008 +0800

    ata: add the fis struct for SATA

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:51:44 2008 +0800

    ata: add the libata support

    add simple libata support in u-boot

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 8e9bb43429e50df55fa41932cbe65841ff579220
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:50:45 2008 +0800

    ata: make the ata_piix driver using new SATA framework

    original ata_piix driver is using IDE framework, not real
    SATA framework. For now, the ata_piix driver is only used
    by x86 sc520_cdp board. This patch makes the ata_piix driver
    use the new SATA framework, so

    - remove the duplicated command stuff
    - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
    - add the CONFIG_CMD_SATA define to sc520_cdp.h

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:49:44 2008 +0800

    ata: add the support for SATA framework

    - add the SATA framework
    - add the SATA command line

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:48:18 2008 +0800

    ata: merge the header of ata_piix driver

    move the sata.h from include/ to drivers/block/ata_piix.h

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 9eef62804d9695425b24c87b46a61a7fa74afee0
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Mar 26 22:47:06 2008 +0800

    ata: merge the ata_piix driver

    move the cmd_sata.c from common/ to drivers/ata_piix.c,
    the cmd_sata.c have some part of ata_piix controller drivers.
    consolidate the driver to have better framework.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Wed Mar 26 18:26:43 2008 +0100

    USB, Storage: fix a bug introduced in commit
    f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
    to only print only information on one storage device, but not for
    multiple.

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
Author: Anatolij Gustschin <agust@denx.de>
Date:	Wed Mar 26 17:47:44 2008 +0100

    Fix compilation error in cmd_usb.c

    This patch fixes compilation error
    cmd_usb.c: In function 'do_usb':
    cmd_usb.c:552: error: void value not ignored as it ought to be

    Signed-off-by: Anatolij Gustschin <agust@denx.de>
    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Mar 26 08:53:53 2008 -0500

    85xx: Add cpu_mp_lmb_reserve helper to reserve boot page

    Provide a board_lmb_reserve helper function to ensure we reserve
    the page of memory we are using for the boot page translation code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 79679d80021ab095e639e250ca472fe526da02e2
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Mar 26 08:34:25 2008 -0500

    85xx: Update multicore boot mechanism to ePAPR v0.81 spec

    The following changes are needed to be inline with ePAPR v0.81:

    * r4, r5 and now always set to 0 on boot release
    * r7 is used to pass the size of the initial map area (IMA)
    * EPAPR_MAGIC value changed for book-e processors
    * changes in the spin table layout
    * spin table supports a 64-bit physical release address

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 25eedb2c1958a13110c7de1fc809b624053cc69c
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 19 15:02:07 2008 -0500

    FSL: Clean up board/freescale/common/Makefile

    Each file that can be built here now follows some
    CONFIG_ option so that they are appropriately built
    or not, as needed.	And CONFIG_ defines were added
    to various board config files to make sure that happens.

    The other board/freescale/*/Makefiles no longer need
    to reach up and over into ../common to build their
    individually needed files any more.

    Boards that are CDS specific were renamed with cds_ prefix.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 22:00:27 2008 -0600

    85xx: Fix merge duplication

    ft_fixup_cpu() got duplicated in some merge snafu.	Remove the duplicate.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5893b3d0a4084f87a06a5d3dc03db91206818941
Author: James Yang <James.Yang@freescale.com>
Date:	Tue Feb 12 16:35:07 2008 -0600

    85xx: Expand CCSR space with more DDR controller registers.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
Author: James Yang <James.Yang@freescale.com>
Date:	Fri Feb 8 18:05:08 2008 -0600

    85xx: Speed up get_ddr_freq() and get_bus_freq()

    get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
    called.  However, get_sys_info() recalculates extraneous information when
    called each time.  Have get_ddr_freq() and get_bus_freq() return memoized
    values from global_data instead.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e9ea679918fbc9a53fa2f2a904aac874ea736036
Author: James Yang <James.Yang@freescale.com>
Date:	Fri Feb 8 16:46:27 2008 -0600

    85xx: Show DDR memory data rate in addition to the memory clock frequency.

    Show the DDR memory data rate in addition to the memory clock
    frequency.	For DDR/DDR2 memories the memory data rate is 2x the
    memory clock.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 591933ca6eabc440e6ed6967233aaf56fce464a3
Author: James Yang <James.Yang@freescale.com>
Date:	Fri Feb 8 16:44:53 2008 -0600

    85xx: get_tbclk() speed up and rounding fix

    Speed up get_tbclk() by referencing pre-computed bus clock
    frequency value from global data instead of sys_info_t.  Fix
    rounding of result to nearest; previously it was rounding
    upwards.

    Signed-off-by: James Yang <James.Yang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Feb 6 01:19:40 2008 -0600

    Update SVR numbers to expand support

    FSL has taken to using SVR[16:23] as an SOC sub-version field.  This
    is used to distinguish certain variants within an SOC family.  To
    account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
    constants to reflect the larger value.  We also add SVR numbers for all
    of the current variants.  Finally, to make things neater, rather than
    use an enormous switch statement to print out the CPU type, we create
    and array of SVR/name pairs (using a macro), and print out the CPU name
    that matches the SVR SOC version.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Feb 6 01:12:57 2008 -0600

    Add the Freescale PCI device IDs

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Feb 14 11:04:23 2008 -0600

    85xx: Added support for multicore boot mechanism

    Added the cpu command that provides a generic mechanism to get status,
    reset, and release secondary cores in multicore processors.

    Added support for using the ePAPR defined spin-table mechanism on 85xx.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Jan 17 16:48:33 2008 -0600

    85xx: Added support for multicore boot mechanism

    Added the cpu command that provides a generic mechanism to get status,
    reset, and release secondary cores in multicore processors.

    Added support for using the ePAPR defined spin-table mechanism on 85xx.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f69766e4b5d47ecd3aa58677a8da875694f364f2
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Jan 30 14:55:14 2008 -0600

    85xx: Add the concept of CFG_CCSRBAR_PHYS

    When we go to 36-bit physical addresses we need to keep the concept of
    the physical CCSRBAR address seperate from the virtual one.

    For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Mar 26 15:38:47 2008 +0100

    Coding style cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:	Wed Mar 26 13:02:13 2008 +0100

    Add CFG_RTC_DS1337_NOOSC to turn off OSC output

    The default settings for RTC DS1337 keeps the OSC
    output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
    turn it off.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Mar 26 11:48:46 2008 +0100

    Cleanup coding style, update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Mar 26 10:40:12 2008 +0100

    README: update documentation (availability, links, etc.)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
Author: Aras Vaichas <arasv@magtech.com.au>
Date:	Tue Mar 25 12:09:07 2008 +1100

    USB Storage, add meaningful return value

    This patch changes the "usb storage" command to return success if it
    finds a USB storage device, otherwise it returns error.

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 18e69a35efbb078403db0c0063986470dad7d082
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Fri Mar 14 23:20:18 2008 +0300

    83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role

    Linux understands "host" (default), "peripheral" and "otg" (broken).
    Though, U-Boot doesn't restrict dr_mode variable to these values (think
    of renames in future).

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit c7604783b236e368f225efb7b3efb418fe20b404
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Fri Mar 14 23:20:30 2008 +0300

    tsec: fix link detection for the RTL8211B PHY

    RTL8211B sets link state register after autonegotiation complete,
    so with bootdelay=0 RTL8211B will report lack of the link.

    To fix this, we should wait for aneg to complete, even if the
    link is currently down.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:47:09 2008 +0300

    mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups

    device_type = "soc" is being deprecated, newer device trees will use
    "fsl,soc" and/or "fsl,immr" for the soc nodes.

    This patch also adds clock-frequency property for soc nodes (the same
    value as bus-frequency).

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
Author: Joe D'Abbraccio <ljd015@freescale.com>
Date:	Mon Mar 24 13:00:59 2008 -0400

    Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock

    With the original value of 1/2 clock cycle delay, the system ran relatively
    stable except when we run benchmarks that are intensive users of memory.
    When I run samba connected disk with a HDBENCH test, the system locks-up
    or reboots sporadically.

    Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>

commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
Author: Scott Wood <scottwood@freescale.com>
Date:	Mon Mar 24 12:44:13 2008 -0500

    mpc83xx: Set PCI I/O bus-address base to zero.

    The device trees for these boards describe PCI I/O as starting from
    address zero from the device's perspective.

    Placing I/O elsewhere may cause problems with certain PCI boards, and may
    cause problems with Linux.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:47:05 2008 +0300

    mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK

    At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
    This patch fixes "system time drifting" problem.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:47:02 2008 +0300

    mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS

    This is needed to update /choosen/linux,stdout-path properly.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:47:00 2008 +0300

    mpc83xx: MPC8360E-RDK: add dhcp command

    Plus modify environment to use it and remove bootfile env variable,
    it is internal and CONFIG_BOOTFILE is used for these purposes.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:57 2008 +0300

    mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc

    Current DDR setup easily causes memory corruption, this patch fixes it.

    Also fix TIMING_CFG0_MRS_CYC definition.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:53 2008 +0300

    mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI

    This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
    controller and FHCI (QE USB).

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 7ad959490962e6842648d87d4bd795ea6cdcce67
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:51 2008 +0300

    mpc83xx: MPC8360E-RDK: add support for NAND

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 9a3e832aeb491861d029991241572ebdf4b5b61b
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:46 2008 +0300

    mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode

    This is needed for BCM PHYs to work on this board.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:34 2008 +0300

    uec: add support for Broadcom BCM5481 Gigabit PHY

    This patch adds basic support for Broadcom BCM5481 PHY.

    RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
    Peter Barada <peterb@logicpd.com>.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 6a600c3a1876bc203445df4f0fd6b12648259666
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:28 2008 +0300

    uec: add support for RGMII_RXID interface mode

    PHY drivers will use it to setup software delay between RXD and RXC
    signals.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 20:46:24 2008 +0300

    uec: add support for gbit mii status readings

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 17:40:47 2008 +0300

    83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards

    This is primarily for the early console support.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 17:40:43 2008 +0300

    83xx: initialize serdes for MPC837XRDB boards

    On the MPC8377ERDB: 2 SATA and 2 PCI-E.
    On the MPC8378ERDB: 2 PCI-E
    On the MPC8379ERDB: 4 SATA

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 453316a2a19642d8afcbca7452e40a6b44a197b1
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 17:40:32 2008 +0300

    83xx: serdes setup routines

    This patch adds few routines to configure serdes on 837x targets.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 17:40:27 2008 +0300

    83xx: split COBJS onto separate lines

    ..plus get rid of some #ifdefs in the .c files.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Mon Mar 24 17:40:23 2008 +0300

    83xx: nand support for MPC837XRDB boards

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 82e45a204190593e8613145a928f998fb8c909c4
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date:	Tue Mar 18 21:44:41 2008 -0400

    Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 0fa7a1b4719e325fce332689fb8754ec166191ff
Author: Michael Barkowski <michael.barkowski@freescale.com>
Date:	Thu Mar 20 13:15:39 2008 -0400

    mpc8323erdb: remove RTC and add EEPROM

    There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.

    Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>

commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
Author: Michael Barkowski <michael.barkowski@freescale.com>
Date:	Thu Mar 20 13:15:34 2008 -0400

    mpc8323erdb: Improve the system performance

    The following changes are based on kernel UCC ethernet performance:

    1.	Make the CSB bus pipeline depth as 4, and enable the repeat mode
    2.	Optimize transactions between QE and CSB.  Added CFG_SPCR_OPT
	switch to enable this setting.

    The following changes are based on the App Note AN3369 and
    verified to improve memory latency using LMbench:

    3.	CS0_CONFIG[AP_n_EN] is changed from 1 to 0
    4.	CS0_CONFIG[ODT_WR_CONFIG] set to 1.  Was a reserved setting
	previously.
    5.	TIMING_CFG_1[WRREC] is changed from 3clks to 2clks  (based on
	Twr=15ns, and this was already the setting in DDR_MODE)
    6.	TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
	Trp=15ns)
    7.	TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
	Tras=40ns)
    8.	TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
	Trcd=15ns)
    9.	TIMING_CFG_1[REFREC] changed from 21 clks to 11clks.  (based on
	Trfc=75ns)
    10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks.  (based
	on Tfaw=50ns)
    11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
	on CL=3 and WL=2).

    Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>

commit fc549c871f43933396a5b3e21d897023d4b31b8d
Author: Michael Barkowski <michael.barkowski@freescale.com>
Date:	Thu Mar 20 13:15:28 2008 -0400

    mpc8323erdb: use readable DDR config macros

    Use available shift/mask macros to define DDR configuration.

    Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>

commit 89c7784ed90ba50301eec521144f95111e472906
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Feb 8 13:15:55 2008 -0600

    83xx: Add Vitesse VSC7385 firmware uploading

    Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
    the Vitesse VSC7385 firmware.  Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
    Cleaned up the board header files to make selecting the VSC7385 easier to
    control.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Feb 8 13:15:54 2008 -0600

    NET: Add Vitesse VSC7385 firmware uploading

    The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
    and other boards.  A small firwmare must be uploaded to its on-board memory
    before it can be enabled.  This patch adds the code which uploads firmware
    (but not the firmware itself).

    Previously, this feature was provided by a U-Boot application that was
    made available only on Freescale BSPs.  The VSC7385 firmware must still
    be obtained separately, but at least there is no longer a need for a separate
    application.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Mar 26 00:52:10 2008 +0100

    Coding Style cleanyp; update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 43ddd9c820fec44816188f53346b464e20b3142d
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date:	Sat Mar 22 14:23:49 2008 -0400

    Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T

    These defines embedded the u-boot env variables and/or the bd_t structure
    in the fdt blob.  The conclusion of discussion on the u-boot email list
    was that embedding these in the fdt blob is not useful: there are better
    ways of passing the data (in fact, the fdt blob itself replaces the
    bd_t struct).

    The only board that enables these is the stxxtc and they don't appear
    to be used by linux.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>

commit 22ed2285743359fd1fe73e411dff914b2256e68f
Author: Stefan Roese <sr@denx.de>
Date:	Mon Mar 17 10:49:25 2008 +0100

    rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Mon Mar 17 08:54:06 2008 +0900

    Add Flex-OneNAND booting support

    Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
    using a NOR Flash interface. This on-chip integration enables system designers
    to reduce external system logic and use high-density NAND Flash
    in applications that would otherwise have to use more NOR components.

    Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
    in more flexible way. While MLC area of Flex-OneNAND can be used to store data
    that require low reliability and high density, SLC area of Flex-OneNAND
    to store data that need high reliability and high performance. Flex-OneNAND
    can let users take advantage of storing these two different types of data
    into one chip, which is making Flex-OneNAND more cost- and space-effective.

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit c512389cc4a10253249271ff6c887c6dab1f0db2
Author: André Schwarz <andre.schwarz@matrix-vision.de>
Date:	Thu Mar 13 13:50:52 2008 +0100

    MPC5200: support setup without FEC

    Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
    defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>

commit aa3511e422946041ef626f80a05ae5e8bfc700e6
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 5 18:05:46 2008 -0600

    FSL: Move board/mpc8266ads under board/freescale

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 7f1d846e5c5754449c286587d099d85246062772
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 5 18:05:47 2008 -0600

    FSL: Move board/mpc7448hpc2 under board/freescale

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 5 18:05:45 2008 -0600

    FSL: Move board/mpc8260ads under board/freescale

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
Author: goda.yusuke <goda.yusuke@renesas.com>
Date:	Wed Mar 5 17:08:33 2008 +0900

    net: Add support AX88796L ethernet device

    AX88796L is device of NE2000 compatible.
    This patch support AX88796L ethernet device.

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit e0a6140dd381e1eed1ada2291166ef2616d8822b
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 25 22:50:41 2008 +0100

    ne2000 driver: change #ifdef to Makefile conditional compilation

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e710185aae90c64d39c2d453e40e58ceefe4f250
Author: goda.yusuke <goda.yusuke@renesas.com>
Date:	Wed Mar 5 17:08:20 2008 +0900

    net: Divided code of NE2000 ethernet driver

    There are more devices of the NE2000 base.
    A present code is difficult for us to support more devices.
    To support more NE2000 clone devices, separated the function.

    Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
    Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 395bce4f59a507a60a475f7ee46bed47de9482df
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Feb 24 23:58:13 2008 -0500

    net/Blackfin: move on-chip MAC driver into drivers/net/

    The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
    directory, but it is not board specific, so relocate it to the drivers dir
    so that other Blackfin ports can utilize it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Feb 24 23:52:35 2008 -0500

    smc91111: use SSYNC() rather than asm(ssync) for Blackfin

    Since the "ssync" instruction may have hardware anomalies associated with
    it, have the smc91111 driver use the SSYNC macro rather than invoking it
    directly.  We workaround all the anomalies via this macro.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
Date:	Sun Feb 17 22:57:47 2008 +0000

    8xx: Update OF support on 8xx

    This patch does some shifting around of OF support on 8xx.

    Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>

commit 9c666a7db0b2285a270c68810889ce7d5dba304b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 15 15:16:18 2008 -0600

    ppc: Allow boards to specify how much memory they can map

    For historical reasons we limited the stack to 256M because some boards
    could only map that much via BATS.	However newer boards are capable of
    mapping more memory (for example 85xx is capble of doing up to 2G).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
Date:	Fri Feb 15 01:05:58 2008 +0000

    8xx : Add OF support to Adder875 board port - resubmit

    Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>

commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Thu Feb 14 20:44:42 2008 -0600

    Add setexpr command

    Add a simple expr style command that will set an env variable as the result
    of the command.  This allows us to do simple math in shell.  The following
    operations are supported: &, |, ^, +, -, *, /.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3f105faa64b9826e088711fdfcaa70cb1230397a
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 5 17:27:48 2008 -0600

    FSL: Move board/mpc7448hpc2 under board/freescale

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 449c703374a8868453425e15da7e2f76221b72e4
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 5 17:21:43 2008 -0600

    FSL: Move board/mpc8266ads under board/freescale

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 5863577989ad689427bb750107e9a75f1c1645d2
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Mar 5 16:41:41 2008 -0600

    FSL: Move board/mpc8260ads under board/freescale

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 8a773983957ee6c4aa344469b742f29c7d26afbd
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:08 2008 +0900

    [MIPS] Move gth2_config from ARM section to MIPS

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:07 2008 +0900

    [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:07 2008 +0900

    [MIPS] Fix dcache_status()

    You can't judge UNCACHED by Config.K0 LSB.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:07 2008 +0900

    [MIPS] Introduce _machine_restart

    Handles machine specific functions by using weak functions.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit decaba6f5cf386d569ac3997bebb871b966c6b18
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:07 2008 +0900

    [MIPS] Cleanup CP0 Status initialization

    Add setup_c0_status from Linux. For the moment we disable interrupts, set
    CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
    reset-time configuration and will work well across most processors.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:07 2008 +0900

    [MIPS] Initialize CP0 Cause before setting up CP0 Status register

    Without this change, we'll be suffering from deffered WATCH exception
    once Status.EXL is cleared. Make sure Cause.WP is cleared.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 26138623230ca2bad3c78e05a65527ea70c8b688
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:07 2008 +0900

    [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()

    Move things to appropriate place.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:06 2008 +0900

    [MIPS] Implement flush_cache()

    We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
    don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
    function is used not only in U-Boot specfic programs but also at loading
    target binaries.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:06 2008 +0900

    [MIPS] Fix I-/D-cache initialization loops

    Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
    again per a loop for I-cache initialization. But according to 'See MIPS
    Run', we're encouraged to use three separate loops rather than combining
    them *for both I- and D-cache*. This patch tries to fix this.

    In accordance with fixing above, mips_init_[id]cache are separated from
    mips_cache_reset(), and rewrite cache loops are completely rewritten with
    useful macros.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 1898840797c7f50799377bd5b285a8a93a82c419
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:06 2008 +0900

    [MIPS] Replace memory clearance code with f_fill64

    This routine fills memory with zero by 64 bytes, and is 64-bit capable.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 21:30:06 2008 +0900

    [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros

    This patch replaces the current function definitions with NESTED, LEAF
    and END macro. They specify some more additional information about the
    function; an alignment of symbol, type of symbol, stack frame usage, etc.
    These information explicitly tells the assembler and the debugger about
    the types of code we want to generate.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 282223a607c611425fa33f5428f8eae6636972bb
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 11:43:17 2008 +0900

    [MIPS] asm headers' updates

    Make some asm headers adjusted to the latest Linux kernel.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Tue Mar 25 11:39:29 2008 +0900

    [MIPS] Request for the 'mips_cache_lock()' removal

    The initial intension of having mips_cache_lock() was to use the cache
    as memory for temporary stack use so that a C environment can be set up
    as early as possible.

    But now mips_cache_lock() follow lowlevel_init(). We've already have the
    real memory initilaized at this point, therefore we could/should use it.
    No reason to lock at all.

    Other problems:

    Cache locking is not consistent across MIPS implementaions. Some imple-
    mentations don't support locking at all. The style of locking varies -
    some support per line locking, others per way, etc. Some parts use bits
    in status registers instead of cache ops. Current mips_cache_lock() is
    not necessarily general-purpose.

    And this is worthy of special mention; once U-Boot/MIPS locks the lines,
    they are never get unlocked, so the code relies on whatever gets loaded
    after U-Boot to re-initialize the cache and clear the locks. We're sup-
    posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
    but leave the situation as it is for a long time.

    For these reasons, I proposed the removal of mips_cache_lock() from the
    global start-up code.

    This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
    *things have changed*. If he wants the same behavior as before, he needs
    to have CFG_INIT_RAM_LOCK_MIPS in his config file.

    If we don't have any regression report through several releases, then
    we'll remove codes entirely.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
    Acked-by: Andrew Dyer <amdyer@gmail.com>

commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Mon Mar 24 11:30:54 2008 +0100

    lwmon5 SYSMON POST: fix backlight control

    If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
    run on the board, then the SYSMON POST controls the display backlight
    (doesn't switch backlight ON if POST FAILED, and does switch the
    backlight ON if PASSED).

    If not, then the video driver controls the display backlight (just
    switch ON the backlight upon initialization).

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Mon Mar 24 11:29:14 2008 +0100

    lwmon5 SYSMON POST: fix handling of negative temperatures

    Fix errors in the LWMON5 Sysmon POST for negative temperatures.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Mar 7 16:04:25 2008 +0900

    pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option

    In current source code, when the device number of PCI is 0, process PCI
    bridge without fail. However, when the device number is 0, it is not PCI
    always bridge. There are times when device of PCI allocates.

    When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
    use this patch.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Acked-by: Stefan Roese <sr@denx.de>

commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Fri Mar 21 09:18:40 2008 +0100

    LWMON5: fix dsPIC POST

    Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---

commit 388b82fddc7c05596f3f615f190da0448227dc82
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 20 23:23:13 2008 +0100

    [new uImage] Enable new uImage support for the pcs440ep board.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 20 23:23:13 2008 +0100

    [new uImage] Do not compile new uImage format support by default

    Disable default building of new uImage format support in preparation
    for merge with the master. Support for new format can be enabled on
    a per-board basis, by defining the following in the board's config file:

    #define CONFIG_FIT		   1
    #define CONFIG_OF_LIBFDT	   1

    This can be optionally defined to give more verbose output:

    #define CONFIG_FIT_VERBOSE	   1 /* enable fit_format_{error,warning}() */

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit dafaede8a46c7159310239e036c93e31c6374487
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 20 23:20:31 2008 +0100

    [new uImage] Disable debuging output in preparation for merge with master

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit fbe7a155027beacebaee9b32e1ada781fe924bca
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 20 19:38:45 2008 +0100

    [new uImage] Compilation and new uImage handling fixes for imxtract

    Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
    include/config_cmd_default.h. Fix few warnings and handling of new format
    images.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 36cc8cbb3379d5166f882641123521735c469f92
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 20 23:10:19 2008 +0100

    [new uImage] Fix autoscr command used with new uImage format

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 43142e817f0597be412e7cbe19413f5532eafa5d
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Mar 20 23:10:19 2008 +0100

    [new uImage] Fix *.its files location in documentation

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Mar 20 22:01:38 2008 +0100

    lwmon5 POST: remove unreachable code

    plus some coding style cleanup

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu Mar 20 17:56:04 2008 +0300

    LWMON5: POST RTC fix

    Modify the RTC API to provide one a status for the time reported by
    the rtc_get() function:
      0 - a reliable time is guaranteed,
    < 0 - a reliable time isn't guaranteed (power fault, clock issues,
	  and so on).

    The RTC chip drivers are responsible for providing this info if the
    corresponding chip supports such functionality. If not - always
    report that the time is reliable.

    The POST RTC test was modified to detect the RTC faults utilizing
    this new rtc_get() feature.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
Author: Martin Krause <martin.krause@tqs.de>
Date:	Wed Mar 19 14:25:14 2008 +0100

    TQM5200B: update MTD partition layout

    - insert partition for dtb blob to TQM5200B MTD layout
    - set env variables dependent on the configured board
      (TQM5200 or TQM5200B)

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit f0105727d132f56a21fa3ed8b162309cca6cac44
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 19 07:09:26 2008 +0100

    CFI: Small cleanup for FLASH_SHOW_PROGRESS

    With this patch we don't need that many #ifdef's in the code. It moves
    the subtraction into the macro and defines a NOP-macro when
    CONFIG_FLASH_SHOW_PROGRESS is not defined.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit 9a042e9ca512beaaa2cb450274313fc477141241
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date:	Sat Mar 8 13:48:01 2008 -0500

    Flash programming progress countdown.

    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Mar 19 10:00:06 2008 +0100

    [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Mon Feb 18 18:09:04 2008 +1100

    libfdt: Remove no longer used code from fdt_node_offset_by_compatible()

    Since fdt_node_offset_by_compatible() was converted to the new
    fdt_next_node() iterator, a chunk of initialization code became
    redundant, but was not removed by oversight.  This patch cleans it up.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit d0ccb9b140b472039732de102fc14597eedb14df
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Mon Feb 18 18:06:31 2008 +1100

    libfdt: Trivial cleanup for CHECK_HEADER)

    Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
    However, there are a handful of functions (fdt_move, rw_check_header,
    fdt_open_into) from other files which could also use it (currently
    they open-code something more-or-less identical).  Therefore, this
    patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
    places.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit fe30a354cdbb808b5f15366a935b151a4ccee74f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 20 14:32:36 2008 -0600

    Fix fdt boardsetup command parsing

    The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 804887e6001e2f00bea11431bf34d6d472512cda
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Feb 15 03:34:36 2008 -0600

    Add sub-commands to fdt

    fdt header				- Display header info
    fdt bootcpu <id>			- Set boot cpuid
    fdt memory <addr> <size>		- Add/Update memory node
    fdt rsvmem print			- Show current mem reserves
    fdt rsvmem add <addr> <size>	- Add a mem reserve
    fdt rsvmem delete <index>		- Delete a mem reserves

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Thu Feb 14 16:50:34 2008 +1100

    libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()

    fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
    node which has NOP tags interspersed with its properties.  In this
    case fdt_add_subnode_namelen() will put the new subnode before the
    first NOP tag, even if there are properties after it, which will
    result in an invalid blob.

    This patch fixes the bug, and adds a testcase for it.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Tue Feb 12 11:58:31 2008 +1100

    libfdt: Add and use a node iteration helper function.

    This patch adds an fdt_next_node() function which can be used to
    iterate through nodes of the tree while keeping track of depth.  This
    function is used to simplify the iteration code in a lot of other
    functions, and is also exported for use by library users.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Fri Jan 11 14:55:05 2008 +1100

    libfdt: Add fdt_set_name() function

    This patch adds an fdt_set_name() function to libfdt, mirroring
    fdt_get_name().  This is a r/w function which alters the name of a
    given device tree node.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 23e20aa6488e6c0622496549861bfdc74108debe
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Tue Mar 18 13:33:30 2008 +0100

    lwmon5: Fix register test logic to match the specific GDC h/w.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 46bc0a938779aa1d664b847d36b08aa00f22e539
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Tue Mar 18 13:27:57 2008 +0100

    Fix backlight in the lwmon5 POST.

    Backlight was switched on even when temperature was too low.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Wed Feb 6 18:48:36 2008 +0100

    The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).

     To enable this, alternative, configuration the U-Boot board configuration
    file for lwmon5 includes the definitions of alternative addresses for header
    (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).

     The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
    and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
    lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 17:11:53 2008 +0100

    Add support for the lwmon5 board reset via GPIO58.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 17:09:55 2008 +0100

    Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 14:11:03 2008 +0100

    The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 14:10:42 2008 +0100

    The patch adds new POST tests for the Lwmon5 board. These are:

    * External Watchdog test;
    * dsPIC tests;
    * FPGA test;
    * GDC test;
    * Sysmon tests.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit c2ed33efbfff5767bca236828e021c55fd547b6c
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 14:10:01 2008 +0100

    Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>

commit 3a5d1e7f1309998791702b2a559e3126781746b9
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Tue Mar 18 13:33:30 2008 +0100

    lwmon5: Fix register test logic to match the specific GDC h/w.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Tue Mar 18 13:27:57 2008 +0100

    Fix backlight in the lwmon5 POST.

    Backlight was switcehd on even when temperature was too low.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Wed Feb 6 18:48:36 2008 +0100

     The patch introduces the alternative configuration of the log buffer for
    the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
    the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
    PPC440EPX_GPT0_COMP5).

     To enable this, alternative, configuration the U-Boot board configuration
    file for lwmon5 includes the definitions of alternative addresses for header
    (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).

     The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
    and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
    lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit ff818b21b069f4bc9cb73373cc5a16014be101b7
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 17:11:53 2008 +0100

    Add support for the lwmon5 board reset via GPIO58.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 17:09:55 2008 +0100

    Some fixes to dspic, fpga, and gdc post tests for lwmon5.
    Disable external watch-dog for now.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit e262efe35742c1ad4b0966ff501efc26f34a0aec
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 14:11:03 2008 +0100

    The patch introduces the CRITICAL feature of POST tests. If the test
    marked as POST_CRITICAL fails then the alternative, post_critical,
    boot-command is used. If this command is not defined then U-Boot
    enters into interactive mode.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 65b20dcefc89618193fa51947968dada91e4c778
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 14:10:42 2008 +0100

    The patch adds new POST tests for the Lwmon5 board.
    These are:

    * External Watchdog test;
    * dsPIC tests;
    * FPGA test;
    * GDC test;
    * Sysmon tests.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
Author: Yuri Tikhonov <yur@pollux.denx.de>
Date:	Mon Feb 4 14:10:01 2008 +0100

    Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>

commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 18 17:35:51 2008 +0100

    HMI1001: fix compile problem.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1f2a9970109cebf7446e0503b10b71f8673045ee
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 18 05:32:30 2008 -0500

    Blackfin: BF537-stamp: drop board-specific flash driver for CFI

    The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
    for the board specific driver at all.  Just use the common CFI driver.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Feb 19 00:36:14 2008 -0500

    Blackfin: add proper ELF markings to some assembly functions

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Feb 19 00:35:17 2008 -0500

    Blackfin: new cplbinfo command for viewing cplb tables

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit aadb72503cd1602349a5fe53356d5f55ecc1b900
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 18 05:37:51 2008 -0500

    Blackfin: update MAINTAINERS list

    Add maintainer information for the Blackfin boards.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 18 05:26:48 2008 -0500

    Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU

    Stop tying things to the processor that should be tied to other defines and
    change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
    system to select the -mcpu option.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 86a20fb920bd198105acf7b1191117f566d637ed
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Feb 16 07:40:36 2008 -0500

    Blackfin: move bootldr command to common code

    This moves the Blackfin-common bootldr command out of the BF537-STAMP
    specific board directory and into the common directory so that all Blackfin
    boards may utilize it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit decbe029b2a9d3333d02c433389b1c821eea96d7
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Mar 14 11:05:20 2008 +0100

    mgcoge: update configuration

    Fix configuration for mgcoge board

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit c136724cda0219c49f1d4b346f00da29b14fdf14
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 16 01:22:59 2008 +0100

    drivers/rtc/Makefile: keep list sorted

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
Author: Tor Krill <tor@excito.com>
Date:	Sat Mar 15 15:40:26 2008 +0100

    Add support for Intersil isl1208 RTC

    Signed-off-by: Tor Krill <tor@excito.com>

commit 0210cff3d079d97b2156b13685ee8de368e68a1a
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Mar 15 17:36:41 2008 +0100

    cramfs: Fix ifdef

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 16 01:12:58 2008 +0100

    Conding style cleanup

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 41712b4e8c95dff23354bcd620e1f9477160c190
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 5 12:31:53 2008 +0100

    ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board

    This patch adds USB OHCI support to the Canyonlands board port. It also
    enables EXT2 support.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2596f5b9d353ff3e4387a3325d05740f16958038
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 5 12:29:32 2008 +0100

    usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver

    This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
    way a board just needs to define this new option to enable the "force
    NoPowerSwitching mode" instead of adding new CPU/architecture defines
    to the USB source itself.

    This new option will be used first with the new AMCC 460EX Canyonlands
    board port, which will be posted in a few days.

    This patch also fixes a small compilation problem when DEBUG is enabled.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 71665ebf88408ff2acb762af47989fd4365b321a
Author: Stefan Roese <sr@denx.de>
Date:	Mon Mar 3 17:27:02 2008 +0100

    ppc4xx: Add Canyonlands NAND booting support

    460EX doesn't support a fixed bootstrap option to boot from 512 byte page
    NAND devices. The only bootstrap option for NAND booting is option F for
    2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
    EEPROM needs to be programmed accordingly.

    This patch adds basic NAND booting support for the AMCC Canyonlands aval
    board and also adds support to the "bootstrap" command, to enable NAND
    booting I2C setting.

    Tested with 512 byte page NAND device (32MByte) on Canyonlands.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 16:53:00 2008 +0100

    ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)

    This patch adds support for the AMCC Canyonlands 460EX evaluation
    board.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 16:52:24 2008 +0100

    ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)

    This patch adds support for the AMCC Canyonlands 460EX evaluation
    board.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 16:51:17 2008 +0100

    ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)

    This patch adds support for the AMCC Canyonlands 460EX evaluation
    board.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 15:11:43 2008 +0100

    ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)

    This patch adds basic support for the AMCC 460EX/460GT PPC's.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 15:11:18 2008 +0100

    ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)

    This patch adds basic support for the AMCC 460EX/460GT PPC's.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 999ecd5aca381984d8ebbeb207ece82a1c275577
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 15:07:10 2008 +0100

    ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)

    This patch adds basic support for the AMCC 460EX/460GT PPC's.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 15:05:50 2008 +0100

    ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)

    This patch adds basic support for the AMCC 460EX/460GT PPC's.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 15:05:26 2008 +0100

    ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)

    This patch adds basic support for the AMCC 460EX/460GT PPC's.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 56e410178375d9f20be25fb24e180974f0ae120b
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 19 22:07:57 2008 +0100

    ppc4xx: interrupt.c reworked

    This patch is a rework of the 4xx interrupt handling done while
    adding the 460EX/GT support. Interrupts are needed on 4xx for the
    EMAC driver.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 19 22:01:57 2008 +0100

    ppc4xx: program_tlb now uses 64bit physical addess

    This patch changes the physical addess parameter from 32bit to 64bit.
    This is needed for 36bit 4xx platforms to access areas located
    beyond the 4GB border, like SoC peripherals (EBC etc.).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c3307fa186af85771924c434997089b8104c0a46
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 19 21:58:25 2008 +0100

    ppc4xx: miiphy.c reworked

    While adding the 460EX/GT support I reworked the 4xx miiphy code. It
    badly neede some cleanup.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 19 16:21:49 2008 +0100

    rtc: Add M41T62 support

    This patch add support for the STM M41T62 RTC. It is used and tested
    on the AMCC Canyonlands 406EX platform.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 217d383e201adc7f2271145ae345ea5eae2b7170
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Mon Feb 25 18:46:43 2008 +0100

    ppc4xx: Add 405GPr based MCU25 board specific files

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Mon Feb 25 18:46:42 2008 +0100

    ppc4xx: Add 405GPr based MCU25 board config file

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit b05f35436b733a240559e77e46bed8439665ecc5
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Mon Feb 25 18:46:41 2008 +0100

    ppc4xx: Add 405GPr based MCU25 board. Global files

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Mon Feb 25 18:37:02 2008 +0100

    ppc4xx: HCU4/5. remove obsolete hcu_flash.c

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit a079494853cc2bfeddb26673219db0b4b2b31566
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Mon Feb 25 18:37:01 2008 +0100

    ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY

    Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
    the FLASH_CFI_LEGACY et al. config options.

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit e4170e5a50c8110f792bc37472833ae669d69951
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 11 13:52:25 2008 +0100

    ppc4xx: Fix comment in 405EX DDR2 init code

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Mar 14 16:22:34 2008 +0100

    Add MD5 support to the new uImage format

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 0ede0c383530a418cf98be9122371a86573cd0db
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Mar 14 16:22:34 2008 +0100

    Add the MD5 algorithm

    MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
    calculated using the md5() function -- see include/md5.h for details.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Mar 14 16:04:54 2008 +0100

    tools/setlocalversion: use a git-describe-ish format

    Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
    where 'nnnnn' is the number of commits since the last tag (i.e.,
    1.3.2-rc3).  This makes it much easier to recognize "newer" versions
    and to see how much has been changed since the referenced tag.

    Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c6dc21c84de0f159a1752c5ebd33cff843f63609
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Mar 13 14:32:03 2008 +0100

    HMI1001: add support for MPC5200 Rev. B processors.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Mar 13 14:29:49 2008 +0100

    TQM5200: remove dead code

    This board never used a MGT5100 processor.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 12:14:15 2008 +0100

    [new uImage] Fix build issue on ARM

    ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3310c549a73a949430bfda90876df7552a1dab0c
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 12:13:13 2008 +0100

    [new uImage] Add new uImage format documentation and examples

    Create doc/uImage.FIT documentation directory with the following files:
    - command_syntax_extensions.txt : extended command syntax description
    - howto.txt			    : short usage howto
    - source_file_format.txt	    : internal new uImage format description

    Add example image source files:
    - kernel.its
    - kernel_fdt.its
    - multi.its

    Update README appropriately.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit 1ec73761d2e247078f4520a265d463e8b73391a2
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:35:52 2008 +0100

    [new uImage] Fix definition of common bootm_headers_t fields

    verify, autostart and lmb fields are used regardless of CONFIG_FIT
    setting, move their definitions to common section.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 1d1cb4270edc6a99276834064069717f9782c491
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:35:51 2008 +0100

    [new uImage] Fix build problems on trab board

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit f773bea8e11f4a11c388dcee956b2444203e6b65
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:35:46 2008 +0100

    [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used

    Save FIT configuration provied in the first bootm argument and use it
    when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
    arguments are not specified.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:01 2008 +0100

    [new uImage] More verbose kernel image uncompress error message

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:01 2008 +0100

    [new uImage] Use show_boot_progress() for new uImage format

    This patch allocates a set of show_boot_progress() IDs for new uImage format
    and adds show_boot_progress() calls in new uImage format handling code.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:01 2008 +0100

    [new uImage] Add new uImage fromat support to fpga command

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:01 2008 +0100

    [new uImage] Add new uImage format handling to other bootm related commands

    Updated commands:

    docboot  - cmd_doc.c
    fdcboot  - cmd_fdc.c
    diskboot - cmd_ide.c
    nboot    - cmd_nand.c
    scsiboot - cmd_scsi.c
    usbboot  - cmd_usb.c

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:00 2008 +0100

    [new uImage] Add new uImage format support to imgextract command

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:00 2008 +0100

    [new uImage] Add new uImage format support to autoscript routine

    autoscript() routine is updated to accept second argument, which
    is only used for FIT images and provides a FIT subimage unit name.

    autoscript() routine callers must now pass two arguments. For
    non-interactive use (like in cmd_load.c, cmd_net.c), new environment
    variable 'autoscript_uname' is introduced and used as a FIT
    subimage unit name source.

    autoscript command accepts extended syntax of the addr argument:
    addr:<subimg_uname>

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit cd7c596e9f561dbbc17b717277438aee78cde14f
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:33:00 2008 +0100

    [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines

    This patch updates architecture specific implementations of
    do_bootm_linux() adding new uImage format handling for
    operations like get kernel entry point address, get kernel
    image data start address.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 3dfe110149311425919e6d6a14b561b4207498f1
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:32:59 2008 +0100

    [new uImage] Add node offsets for FIT images listed in struct bootm_headers

    This patch adds new node offset fields to struct bootm_headers
    and updates bootm_headers processing code to make use of them.
    Saved node offsets allow to avoid repeating fit_image_get_node() calls.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit bc8ed486b125452ba3bd8344f052f437329150c5
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:32:53 2008 +0100

    [new uImage] ppc: Add new uImage format support to FDT handling routines

    Support for new (FIT) format uImages is added to powerpc specific
    boot_get_fdt() routine which now recognizes, sanity checks FIT image
    and is able to access data sections of the requested component image.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit a44a269a905f924b420020506a4d7d7eedcc0eaf
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:14:57 2008 +0100

    [new uImage] Re-enable interrupts for non automatic booting

    Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
    environment variable is not set to 'yes'.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit d985c8498c4e47095820da97aa722381d39172c5
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:14:38 2008 +0100

    [new uImage] Remove unnecessary arguments passed to ramdisk routines

    boot_get_ramdisk() and image_get_ramdisk() do not need all
    cmdtp, flag, argc and argv arguments. Simplify routines definition.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit c87796483bc7c2900470dc747c367f602577608d
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:12:37 2008 +0100

    [new uImage] Add new uImage format support for ramdisk handling

    This patch updates boot_get_ramdisk() routine adding format
    verification and handling for new (FIT) uImages.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Mar 12 10:01:05 2008 +0100

    [new uImage] Add new uImage format support for kernel booting

    New format uImages are recognized by the bootm command,
    validity of specified kernel component image is checked and
    its data section located and used for further processing
    (uncompress, load, etc.)

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Tue Mar 11 12:35:20 2008 +0100

    [new uImage] Add new uImage format support for imls and iminfo commands

    imls and iminfo can now recognize nad print out contents of the new (FIT)
    format uImages.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Mar 11 12:34:47 2008 +0100

    [new uImage] Add support for new uImage format to mkimage tool

    Support for the new uImage format (FIT) is added to mkimage tool.
    Commandline syntax is appropriately extended:

    mkimage [-D dtc_options] -f fit-image.its fit-image

    mkimage (together with dtc) takes fit-image.its and referenced therein
    binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
    final image that can be transferred to the target (e.g., via tftp) and then
    booted using the bootm command in U-Boot.

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit eb6175edd6c120d8b89678243e5a2be362ee8e40
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Mon Mar 10 17:53:49 2008 +0100

    [new uImage] Make node unit names const in struct bootm_headers

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Feb 29 21:24:06 2008 +0100

    [new uImage] New uImage low-level API

    Add FDT-based functions for handling new format component images,
    configurations, node operations, property get/set, etc.

    fit_	- routines handling global new format uImage operations
		  like get/set top level property, process all nodes, etc.
    fit_image_	- routines handling component images subnodes
    fit_conf_	- routines handling configurations node

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 30f1806f60978d707b0cff2d7bf89d141fc24290
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 16:20:02 2008 +0100

    Release v1.3.2

    Update CHANGELOG for release.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Mar 9 14:52:11 2008 +0100

    SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit db695b78515ddb88a2d4f3357c120345efbf59ec
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Mar 9 10:44:01 2008 +0100

    scb9328: Fix flash warning: type qualifiers ignored on function return type

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 10:50:41 2008 +0100

    esd/common/fpga.c: fix indentation.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit cc3843e36453e2b8db65d7e56de938ba045016a0
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 10:33:31 2008 +0100

    common/kgdb.c: fix 'dereferencing type-punned pointer' warning

    and get rid of a couple of unneeded casts.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 10:09:53 2008 +0100

    esd/common/fpga.c: fix 'assignment of read-only location' error

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c6fe4dabac066e8758345d249032768496983a3e
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 02:13:19 2008 +0100

    Makefile: make build silently again.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 76babc86576f092573599334c85ec543fdbc6015
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 02:07:49 2008 +0100

    m501sk: Fix out of tree building

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 9 00:06:09 2008 +0100

    ADS5121: fix out of tree build

    and simplify Makefile a bit.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Mar 8 22:35:31 2008 +0100

    Release v1.3.2

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 78a90f827df74520e939c794fc7413dace21c4db
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Mar 8 22:35:04 2008 +0100

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Mar 8 21:30:04 2008 +0100

    esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d75469d48c05795144f4b8ba76addbb4920a7bba
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Sat Mar 8 09:25:49 2008 +0900

    net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()

    When rtl_recv() of rtl8169 is called, OWNbit of status register
    is not enable occasionally.
    rtl_recv() doesn't work normally when the driver doesn't do
    appropriate processing.
    This patch fix this problem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Mar 7 08:15:28 2008 +0100

    mgsuvd: update board configuration

    initialize the UPIOx controller.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
Author: Heiko Schocher <hs@denx.de>
Date:	Fri Mar 7 08:13:41 2008 +0100

    mgcoge: update board configuration

    add support for the config Flash.
    initialize the UPIOx controller.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Fri Mar 7 12:27:31 2008 -0600

    mpc83xx: make dtb basename file references equal those of linux

    the dts file basenames were updated in linux - this helps avoid
    inadvertently loading any old dtbs laying around.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 27 16:08:22 2008 -0600

    net: uec_phy: actually increment the timeout counter

    allow u-boot to recover (and, e.g., switch to another interface) in the
    case where a PHY does not report autonegotiation is complete within its
    two second timeout value.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 772003e43957ee0c895abed7cd82cbe72820cbb8
Author: Markus Brunner <super.firetwister@googlemail.com>
Date:	Wed Mar 5 21:38:12 2008 +0100

    fix taihu soft spi_read

    The taihu board used gpio_read_out_bit which reads the output register and not
    the pin state.

    Signed-off-by: Markus Brunner <super.firetwister@gmail.com>

commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
Author: Stefan Roese <sr@denx.de>
Date:	Fri Mar 7 08:01:43 2008 +0100

    ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables

    Signed-off-by: Stefan Roese <sr@denx.de>

commit bd4458cb47abecabd406b1210457be96c69fc49d
Author: Dave Liu <r63238@freescale.com>
Date:	Tue Mar 4 16:59:22 2008 +0800

    837xEMDS: Improve the system performance

    1. Make the CSB bus pipeline depth as 4, and enable
       the repeat mode;
    2. Raise the eTSEC emergency priority;
    3. Use the highest IP blocks clock.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
Author: Detlev Zundel <dzu@denx.de>
Date:	Thu Mar 6 16:45:53 2008 +0100

    Replace "run load; run update" with conditionalized "run load update".

    The latter version stops when "run load" fails for whatever reasons
    rendering the combination *a lot* more secure.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 6bc113886d7d316df1a4e459bec8baf027518551
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 4 17:40:41 2008 +0100

    net: Print error message upon net usage when no ethernet-interface is found

    This patch fixes a problem seen on PPC4xx boards, when no MAC address is
    defined. Then no ethernet interface is available but a simple "tftp"
    command will return without any error message which is quite confusing.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a30a549a3553032d809e0356306b62de0b125901
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Mar 4 10:03:03 2008 -0600

    Remove erroneous or extra spd.h #includers.

    Many of the spd.h #includers don't need it,
    and wanted to have spd_sdram() declared instead.
    Since they didn't get that, some also had open
    coded extern declarations of it instead or as well.
    Fix it all up by using spd_sdram.h where needed.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit a4475386cef14af3fd88f0518b688e755669486d
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 4 17:41:28 2008 +0100

    PCS440EP: fix build problems (redundant #define)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 4 17:39:25 2008 +0100

    net: Print error message upon net usage when no ethernet-interface is found

    This patch fixes a problem seen on PPC4xx boards, when no MAC address is
    defined. Then no ethernet interface is available but a simple "tftp"
    command will return without any error message which is quite confusing.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 4 17:38:50 2008 +0100

    W7OLMC/W7OLMG: fix build problems (redundant #define)

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f9301e1cda296245ba052d7b08321199c3d0af9d
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 4 14:58:31 2008 +0100

    Makefile: fix problem with out-of-tree builds introduced by 5013c09f

    Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
    problem for out-of-tree builds which caused "make clean" to fail.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit dfece9500556bed5d8244b1c15d973cec7c25bfe
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 4 11:58:26 2008 +0100

    examples/Makefile: build "hello_world" on 8xx, too.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 74eb0222594fd23aafdf168e60e872814eea8b62
Author: Mike Nuss <mike@terascala.com>
Date:	Mon Mar 3 15:27:05 2008 -0500

    PPC4xx (Sequoia): Fix Ethernet "remote fault" problems

    Every now and then a Sequoia board (or equivalent hardware) had
    problems connecting to a Gigabit capable network interface.

    There were differences in the PHY setup between Linux and U-Boot.

    This patch fixes the problem. Apparently "remote fault" is being set,
    which signals to some devices (on the other end of the cable) that a
    fault has occurred, while other devices ignore it. I believe the RF bit
    was causing the issue, but I removed T4 also, to match up with Linux.

    Signed-off-by: Mike Nuss <mike@terascala.com>

commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
Author: Timur Tabi <timur@freescale.com>
Date:	Mon Mar 3 09:58:52 2008 -0600

    fix QE firmware uploading limit

    Fix a typo in qe_upload_firmware() that prevented uploading firmware on
    systems with more than one RISC core.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
Author: Bernhard Nemec <bnemec@ganssloser.com>
Date:	Mon Mar 3 11:57:23 2008 +0000

    Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)

    Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
    see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846

    Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>

commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
Author: Kim B. Heino <Kim.Heino@bluegiga.com>
Date:	Mon Mar 3 10:39:13 2008 +0200

    fix copy from ram to dataflash

    If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
    routines instead of dataflash. This is because it checks "if source
    address is not dataflash" instead of target address.

    Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>

commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Mar 3 12:16:44 2008 +0100

    Fix quoting problem (preboot setting) in many board config files.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Mar 3 12:36:49 2008 +0100

    ADS5121: Fix default environment.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Mar 2 16:12:31 2008 +0100

    Makefile: Fix missing unconfig and mkconfig use

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
Author: michael <trimarchi@gandalf.sssup.it>
Date:	Sun Mar 2 23:33:46 2008 +0100

    Fix checking fat32 cluster size.

    This fixes the cluster size tests in the FAT32 file system.
    The current implementation of VFAT support doesn't work if the
    referred cluster has an offset > 16bit representation, causing
    "fatload" and "fatls" commands etc. to fail.

    Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>

commit 661bad63a076a96c39c64f136915f146725af92b
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 2 22:57:23 2008 +0100

    Prepare v1.3.2-rc2 release candidate

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 76957cb3d621bf664311908e5962e151c633c285
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 1 12:11:40 2008 +0100

    ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1

    The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
    currently 4k/2k is configured. This patch fixes this issue.

    Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 118978c8eb43803e2794233922df4249fa278b83
Author: Woodruff, Richard <r-woodruff2@ti.com>
Date:	Fri Feb 29 17:34:35 2008 -0600

    Fix alignment error on ARM for modules

    Fix alignment fault on ARM when running modules.  With out an explicit
    linker file gcc4.2.1 will half word align __bss_start's value.  The word
    dereference will crash hello_world.

    signed-off-by Richard Woodruff <r-woodruff2@ti.com>

commit ce1120dd703e6f12c59e4eba9962356a0300b832
Author: Dave Liu <r63238@freescale.com>
Date:	Fri Feb 29 17:45:31 2008 +0800

    fs: Fix ext2 read issue

    The ext2 aligned process will corrupt the key
    data struct, the patch fix this.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Mar 2 22:45:33 2008 +0100

    Makefile: cleanup "clean" target

    Make sure CDPATH settings cannot interfere.
    Update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ffda586fc1373243c9794babde69500f6293a8d8
Author: Li Yang <leoli@freescale.com>
Date:	Fri Feb 29 11:46:05 2008 +0800

    add cscope build target

    Add cscope build target to generate cscope database for code browsing.

    Signed-off-by: Li Yang <leoli@freescale.com>

commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 27 15:06:39 2008 -0600

    net: uec_phy: handle 88e1111 rev.B2 erratum 5.6

    erratum 5.6 states the autoneg completion bit is functional only if the
    autoneg bit is asserted.

    This fixes any secondarily-issued networking commands on non-gigabit
    links on the mpc8360 mds board.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 5f91db7f582ca17b1f19f10189c025696f333d2e
Author: John Rigby <jrigby@freescale.com>
Date:	Tue Feb 26 09:38:14 2008 -0700

    MPC5121e ADS PCI support take 3

    Adds PCI support for MPC5121

    Tested with drivers/net/rtl8139.c

    Support is conditional since PCI on old silicon does not work.

    ads5121_PCI_config turns on PCI

    In this version, condition compilation of PCI code has been moved
    from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
    suggested by Jean-Christophe PLAGNIOL-VILLARD

    Signed-off-by: John Rigby <jrigby@freescale.com>

commit 44b4dbed4133f657705b7c5193209da9978243a7
Author: Anatolij Gustschin <agust@denx.de>
Date:	Mon Feb 25 23:53:07 2008 +0100

    Fix warnings while compilation of post/drivers/memory.c

    Fix warnings while compilation with new gcc in eldk-4.2

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
Author: Anatolij Gustschin <agust@denx.de>
Date:	Mon Feb 25 20:54:04 2008 +0100

    ppc4xx: Fix problem in 4xx_enet.c driver

    U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
    enabled. To reproduce the problem ensure that 'ethrotate'
    environment variable isn't set to "no" and then run
    "tftp 200000 not_existent_file".
    This patch tries to fix the issue.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
Author: Anatolij Gustschin <agust@denx.de>
Date:	Mon Feb 25 20:04:20 2008 +0100

    POST: Disable cache while SPR POST

    Currently (since commit b2e2142c) u-boot crashes on
    sequoia board while SPR test if CONFIG_4xx_DCACHE is
    enabled. This patch disables the cache while SPR test.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
Author: Martin Krause <martin.krause@tqs.de>
Date:	Mon Feb 25 17:52:40 2008 +0100

    TQM5200: use automatic fdt memory fixup (part 2)

    Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
    TB5200 and TB5200_B to fixup the /memory node with the memory values
    detected by U-Boot.

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit 44ceec253ea941b301abf4b079d52324def69d92
Author: Martin Krause <martin.krause@tqs.de>
Date:	Mon Feb 25 15:17:05 2008 +0100

    TQM5200: use automatic fdt memory fixup

    Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
    TB5200 and TB5200_B to fixup the /memory node with the memory values
    detected by U-Boot.

    Signed-off-by: Martin Krause <martin.krause@tqs.de>

commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
Author: Martin Krause <martin.krause@tqs.de>
Date:	Mon Feb 25 13:27:52 2008 +0100

    TQM5200: fix bug in SDRAM initialization code

    This patch fixes a bug in the SDRAM initialization code for the
    TQM5200. The hi_addr bit is now set correctly. Without this patch
    the hi_addr bit is always set to 1, if the second SDRAM bank is
    not populated.

    For other MPC5200 boards a correspondig patch has already been applied
    some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.

    Signed-off-by: Martin Krause <martin.krause@tqs.de>
    --
    Forget the first patch please. I confused flash with SDRAM in
    the comment ...

commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Feb 25 00:03:12 2008 +0100

    mx1fs2/flash: Fix multiple compiler warnings

    "pointer targets in assignment differ in signedness"

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Feb 25 00:03:11 2008 +0100

    arm-imx: Fix register definitions

    Sync register definitions with linux

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Mon Feb 25 00:03:10 2008 +0100

    actua1/actua2/actua3: Fix multiple unused variable warnings

    - actua1:
	actux1.c: In function 'checkboard':
	actux1.c:92: warning: unused variable 'revision'

    - actua2:
	actux2.c: In function 'checkboard':
	actux2.c:100: warning: unused variable 's'
	actux2.c:99: warning: unused variable 'revision'
	actux2.c: In function 'reset_phy':
	actux2.c:130: warning: unused variable 'i'

    - actua3:
	actux3.c: In function 'checkboard':
	actux3.c:114: warning: unused variable 'revision'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sun Feb 24 11:44:29 2008 +0900

    Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.

    The previous patch was lacking of i386, microblaze, nios and nios2. This
    patch tries to fix them.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Feb 29 22:22:46 2008 +0100

    [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()

    Do not use global fdt blob pointer, calculate blob size from routine
    argument blob pointer.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit d1cc52879c8966507dad9fb575481e6d3985e64e
Author: David Gibson <david@gibson.dropbear.id.au>
Date:	Tue Feb 12 00:58:31 2008 +1100

    libfdt: Add and use a node iteration helper function.

    This patch adds an fdt_next_node() function which can be used to
    iterate through nodes of the tree while keeping track of depth.  This
    function is used to simplify the iteration code in a lot of other
    functions, and is also exported for use by library users.

    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 8cf30809a82902a471866d2f07725ce3b8a22291
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Feb 29 16:00:24 2008 +0100

    [new uImage] Add libfdt support to mkimage

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Feb 29 16:00:23 2008 +0100

    [new uImage] Add sha1.o object to mkimage binary build

    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

commit df6f1b895c997978f03afe04502ee76b7ba34ab9
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Feb 29 16:00:06 2008 +0100

    [new uImage] Fix component handling for legacy multi component images

    Use uint32_t when accessing size table in image_multi_count() and
    image_multi_getimg() for multi component images.

    Add missing uimage_to_cpu() endianness conversion.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Feb 29 15:59:59 2008 +0100

    [new uImage] Share common uImage code between mkimage and U-boot

    This patch adds the following common routines:

    1) Dedicated mkimage print_header() is replaced with common
    image_print_contents()
    image_print_contents_noindent()

    2) Common os/arch/type/comp fields name <--> id translation routines
    genimg_get_os_name()
    genimg_get_arch_name()
    genimg_get_type_name()
    genimg_get_comp_name()
    genimg_get_os_id()
    genimg_get_arch_id()
    genimg_get_type_id()
    genimg_get_comp_id()

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Fri Feb 29 14:58:34 2008 +0100

    [new uImage] Update naming convention for bootm/uImage related code

    This patch introduces the following prefix convention for the
    image format handling and bootm related code:

    genimg_		- dual format shared code
    image_		- legacy uImage format specific code
    fit_		- new uImage format specific code
    boot_		- booting process related code

    Related routines are renamed and a few pieces of code are moved around and
    re-grouped.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:51 2008 -0600

    [new uImage] Respect autostart setting in linux bootm

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:50 2008 -0600

    [new uImage] Provide ability to restrict region used for boot images

    Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
    to restrict what memory range is used for bootm.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:49 2008 -0600

    [new uImage] Use lmb for bootm allocations

    Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
    functions over to using lmb for allocation of the ramdisk, command line
    and kernel bd info.

    Convert PPC specific fdt_relocate() to use lmb for allocation of the device
    tree.

    Provided a weak function that board code can call to do additional
    lmb reserves if needed.

    Also introduce the concept of bootmap_base to specify the offset in
    physical memory that the bootmap is located at.  This is used for
    allocations of the cmdline, kernel bd, and device tree as they should
    be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f5614e7926863bf0225ec860d9b319741a9c4004
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:48 2008 -0600

    [new uImage] Add autostart flag to bootm_headers structure

    The autostart env variable was dropped as part of the initial new uImage
    cleanup.  Add it back here so the arch specific code can decide if it
    wants to really boot or not.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:47 2008 -0600

    [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images

    Introduce the LMB lib used on PPC in the kernel as a clean way to manage
    the memory spaces used by various boot images and structures.  This code
    will allow us to simplify the code in bootm and its support functions.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Feb 19 22:03:47 2008 -0600

    [new uImage] ppc: Allow boards to specify effective amount of memory

    For historical reasons we limited the stack to 256M because some boards
    could only map that much via BATS.	However newer boards are capable of
    mapping more memory (for example 85xx is capable of doing up to 2G).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:46 2008 -0600

    [new uImage] rework error handling so common functions don't reset

    Changed image_get_ramdisk() to just return NULL on error and have
    get_ramdisk() propogate that error to the caller.  It's left to the
    caller to call do_reset() if it wants to.

    Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
    to a common location.  In the future we will change get_fdt() and
    fdt_relocate() to return success/failure and not call do_reset() at all.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit d2bc095a639672def11d5d043b5688d0dbd692ec
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:45 2008 -0600

    [new uImage] ppc: Re-order ramdisk/fdt handling sequence

    Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
    however it does mean we have to go in and fixup the initrd info since
    we don't know where it will be.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 27953493ef025fb698d68c5dee39b36f01f4d530
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:44 2008 -0600

    [new uImage] ppc: Determine if we are booting an OF style

    If we are bootin OF style than we can skip setting up some things
    that are used for the old boot method.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 21:51:43 2008 -0600

    [new uImage] Don't pass kdb to ramdisk_high since we may not have one

    We don't actually need the kdb param as we are just using it to get
    bd->bi_memsize which we can get from gd->bd->bi_memsize.  Also, if we
    boot via OF we might not actually fill out a kdb.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Marian Balakowicz <m8@semihalf.com>

commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Feb 27 16:30:47 2008 -0600

    85xx: Don't icbi when unlocking the cache

    There is no reason to icbi when invalidating the temporary stack in
    the d-cache.  Its impossible on e500 to have the i-cache contain
    any addresses in the temp stack and it can be problematic in generating
    transactions on the bus to non-valid addresses.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Feb 27 15:50:50 2008 -0600

    Fix source for ECM error IVPR

    The source vector for the ECM was being set to 2,
    but that's what the source vector for DDR was being
    set to.  Change it to 1.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Feb 27 14:29:58 2008 -0600

    Invalidate INIT_RAM TLB mappings

    Commit 0db37dc...  (and some others) changed the INIT_RAM TLB
    mappings to be unguarded.  This collided with an existing "bug"
    where the mappings for the INIT_RAM were being kept around.
    This meant that speculative loads to those addresses were
    succeeding in the TLB, and going out to the bus, where they
    were causing an exception (there's nothing at that address). The
    Flash code was coincidentally causing such a speculative load.
    Rather than go back to mapping the INIT RAM as guarded, we fix
    it so that the entries for the INIT_RAM are invalidated.  Thus
    the speculative loads will fail in the TLB, and have no effect.

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 22:56:17 2008 +0100

    sbc8548: Fix Revision reading and unused variable 'path'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 495d162374c472f46454453553382ad0735dc725
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 22:56:16 2008 +0100

    sbc8548: Fix cfi flash bank declaration

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4efbe9dbb129f857f27856936112c8c02f016be6
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Feb 27 11:02:26 2008 +0100

    [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled

    Dual format image code must properly handle all three FDT passing methods:
    - raw FDT blob passed
    - FDT blob embedded in the legacy uImage
    - FDT blob embedded in the new uImage

    This patch enables proper raw FDT handling when no FIT imaeg support
    is compiled in. This is a bit tricky as we must dected FIT format even
    when FIT uImage handling is not enabled as both FIT uImages and raw FDT
    blobs use tha same low level format (libfdt).

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Feb 27 11:02:26 2008 +0100

    [new uImage] POWERPC: Add image_get_fdt() routine

    FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
    (3) or embedded in the new uImage. For the (2) case embedding image must be
    verified before we get FDT from it. This patch factors out legacy image
    specific verification routine to the separate helper routine.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit 1efd43601f90de21ec6c0ebb9880823e822927b1
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Feb 27 11:02:07 2008 +0100

    [new uImage] Add image_get_kernel() routine

    Legacy image specific verification is factored out to a separate helper
    routine to keep get_kernel() generic and simple.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Feb 27 11:01:04 2008 +0100

    [new uImage] Move image verify flag to bootm_headers structure

    Do not pass image verification flag directly to related routines.
    Simplify argument passing and move it to the bootm_header structure which
    contains curently processed image specific data and is already being passed
    on the argument list.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit 823afe7cefe00dafefc6696c1cc7aa828c394234
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Feb 27 11:00:47 2008 +0100

    [Makefile] Sort COBJS in lib_<arch> Makefiles

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Feb 27 11:00:47 2008 +0100

    [new uImage] Optimize gen_get_image() flow control

    When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
    to do, update its control flow to better reflect that simple case.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Mon Feb 4 08:28:17 2008 +0100

    [new uImage] POWERPC: Split get_fdt() into get and relocate routines

    PPC specific FDT blob handling code is divided into two separate routines:

    get_fdt()	- find and verify a FDT blob (either raw or image embedded)
    fdt_relocate()	- move FDT blob to within BOOTMAP if needed

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>

commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
Author: Jon Loeliger <jdl@freescale.com>
Date:	Mon Feb 25 13:13:37 2008 -0600

    86xx: Fix renamed GUR symbols in sbc8641d board.

    Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
    (86xx: Fix GUR PCI config registers properly), we should have
    changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
    symbols in the sbc8641d board as well.  Fix this oversight.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 64cd594e623c39f73964d18787763e4533f791f7
Author: Stefan Roese <sr@denx.de>
Date:	Mon Feb 25 16:50:48 2008 +0100

    ppc4xx: Fix acadia_nand build problem

    Don't include testdram() on NAND-booting target acadia_nand. This saves
    a few bytes and makes the target build clean again.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 14e099e698d41e8179d05c2b2dbcf704a236f748
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 24 23:03:12 2008 +0000

    mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 724902c8464e610642b3a170278b99710325888e
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 24 23:03:11 2008 +0000

    arm-imx: Fix registers definition

    Sync registers definition with linux

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 4cd288b589ea1178947c6e364453c32b3dede6b7
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 24 23:03:10 2008 +0000

    actua1/actua2/actua3: Fix multipleunused variable

    - actua1:
	actux1.c: In function 'checkboard':
	actux1.c:92: warning: unused variable 'revision'

    - actua2:
	actux2.c: In function 'checkboard':
	actux2.c:100: warning: unused variable 's'
	actux2.c:99: warning: unused variable 'revision'
	actux2.c: In function 'reset_phy':
	actux2.c:130: warning: unused variable 'i'

    - actua3:
	actux3.c: In function 'checkboard':
	actux3.c:114: warning: unused variable 'revision'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit d5934ad7756f038a393a9cfab76a4fe306d9d930
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Mon Feb 4 08:28:09 2008 +0100

    [new uImage] Add dual format uImage support framework

    This patch adds framework for dual format images. Format detection is added
    and the bootm controll flow is updated to include cases for new FIT format
    uImages.

    When the legacy (image_header based) format is detected appropriate
    legacy specific handling is invoked. For the new (FIT based) format uImages
    dual boot framework has a minial support, that will only print out a
    corresponding debug messages. Implementation of the FIT specific handling will
    be added in following patches.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit b29661fc1151077776454288051bc9a488351ce8
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Feb 24 15:21:36 2008 +0100

    Coding style cleanup. Prepare v1.3.2-rc2 release candidate

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 00b48a48424894daa589d166d73277830b1c6ac4
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sat Feb 23 12:15:56 2008 +0100

    ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b075d74efb70ff68c49a2532f26b56d6703b69c1
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat Feb 23 17:24:16 2008 +0900

    Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.

    ----------------------------------------------------------------
    Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]

    Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
    32bit targets.

    GCC can be made to warn about usage of long long types with ISO C90
    (-ansi), but only with -pedantic.  You can write this in a way that even
    then it doesn't cause warnings, namely by:

    #ifdef __GNUC__
    __extension__ typedef __signed__ long long __s64;
    __extension__ typedef unsigned long long __u64;
    #endif

    The __extension__ keyword in front of this switches off any pedantic
    warnings for this expression.

    Signed-off-by: Olaf Hering <olh@suse.de>
    Cc: <linux-arch@vger.kernel.org>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
    ----------------------------------------------------------------

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 208acd112e6517b21fc30c420396902b103563ac
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat Feb 23 17:07:57 2008 +0900

    cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.

    This will reduce the build time.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat Feb 23 17:05:00 2008 +0900

    cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.

    This will reduce the build time.

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date:	Sat Feb 23 16:58:41 2008 +0900

    cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.

    This reduces the build time by ~10%. Here's the gth2_config example.

	    BEFORE	 AFTER
    real    0m31.441s	 0m27.833s
    user    0m24.766s	 0m23.045s
    sys     0m10.425s	 0m7.468s

    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
Author: Marcel Moolenaar <marcelm@juniper.net>
Date:	Fri Feb 22 10:48:07 2008 -0800

    make define2mk.sed work on FreeBSD

    In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
    the define2mk.sed script was identified as the source of the link
    failure on FreeBSD. The problem is that sed(1) does not always support
    the '+' operator. It isn't on FreeBSD. The attach patch implements the
    equivalent, using the '*' operator instead and should work everywhere.

    Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>

commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
Author: Detlev Zundel <dzu@denx.de>
Date:	Fri Feb 22 17:21:32 2008 +0100

    Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.

    The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
    final traces of long-deprecated "ramdisk" kernel parm") makes these
    changes neccessary.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
Author: Larry Johnson <lrj@acm.org>
Date:	Thu Feb 21 13:58:16 2008 -0500

    LM75 bug fix for negative temperatures

    When the LM75 temperature sensor measures a temperature below 0 C, the
    current driver does not perform sign extension, so the result returned is
    256 C too high.  This patch fixes the problem.

    Signed-off-by: Larry Johnson <lrj@acm.org>

commit 5a910c224b13e413bda41922379add6d75c32da3
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Feb 21 18:33:45 2008 +0100

    IDS8247: update MAINTAINER entry.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
Author: Heiko Schocher <hs@denx.de>
Date:	Thu Feb 21 18:31:15 2008 +0100

    Fix device tree for mgsuvd board.

    Rename the "scc" node in "ethernet" for the mgsuvd board.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu Feb 21 14:23:42 2008 +0100

    lwmon5: enable hardware watchdog

    Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
    causing it to reboot the board if U-Boot does a long busy-wait with
    udelay(). Thus, for these boards we have to restart WD more
    frequently.

    This patch splits the busy-wait udelay() into smaller, predefined,
    intervals, so that the watchdog timer may be resetted with the
    configurable (CONFIG_WD_PERIOD) interval.

    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Feb 21 12:52:29 2008 +0100

    ppc4xx: Support for ATI Radeon 9200 card on sequoia

    Adds configuration option for ATI Radeon 9200 card
    support to sequoia config file. If CONFIG_VIDEO
    is enabled, TEXT_BASE should be changed to 0xFFF80000.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Feb 18 08:18:07 2008 -0600

    Remove duplicate defines for ARRAY_SIZE

    A few duplicate of the ARRAY_SIZE macro sneaked in since we put
    the define in common.h.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Mon Feb 18 08:09:37 2008 -0600

    ppc: Allow boards to specify effective amount of memory

    For historical reasons we limited the stack to 256M because some boards
    could only map that much via BATS.	However newer boards are capable of
    mapping more memory (for example 85xx is capable of doing up to 2G).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 18 05:24:13 2008 -0500

    include autoconf.mk before any other .mk files

    This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
    those .mk files can have make if statements based on the current config.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 18 05:10:07 2008 -0500

    error check autoconf.mk generation

    If any of the steps for generating autoconf.mk fail currently, they go
    unnoticed.	To fix, we can simply add 'set -e' to the long list of commands.
    This is simpler and more robust than placing '|| exit $$?' after every line.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 019895a8dee71a9f00da05c03e379f45d581b0fe
Author: Stefano Babic <sbabic@denx.de>
Date:	Mon Feb 18 08:03:51 2008 +0100

    Fix bug in dependency checking

    By adding VERSION_FILE to the PHONY targets the script
    /tools/setlocalversion is always called and version_autogenerated.h
    is replaced only if the script find a modified source file.

    Signed-off-by: Stefano Babic <sbabic@denx.de>

commit 98ba144ccc912eee90dd42699f023c497ce774c6
Author: Kyungmin Park <kmpark@infradead.org>
Date:	Mon Feb 18 14:35:43 2008 +0900

    Fix GPMC CS2 memory setup at apollon

    It disables the current map first

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 23:52:46 2008 +0100

    uli526x: Fix multiple differ in signedness and parentheses around comparison

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 16:58:04 2008 +0100

    MIPS: Fix CFG_NO_FLASH support

    - Fix flash_init call when CFG_NO_FLASH is used
    - Remove no more needed flash.c for qemu-mips

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Feb 16 02:40:18 2008 -0500

    easylogo: clean up some more and add -r (rgb) support

    Michael Hennerich added support for outputting an image in RGB format rather
    than forcing YUYV all the time.  This makes obvious sense if the display you
    have takes RGB input rather than YUYV.

    Rather than hack in support for options, I've converted it to use getopt and
    cleaned up the argument parsing in the process.

    Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f65c98129ccada3f7caf97d80395a95b84e911de
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sat Feb 16 02:12:37 2008 -0500

    Makefile: add target for $(LDSCRIPT)

    If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
    then change into the board directory and try and create it.  This allows you
    to generate the linker script on the fly based upon board defines (like the
    Blackfin boards do).

    There should be no regressions due to this change as the normal case is to
    already have a u-boot.lds file.  If that's the case, then there's nothing to
    generate, and so make will always exit.  The fix here is that if the linker
    script does not exist, the implicit rules take over and attempt to guess how
    to generate the file.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 5583cbf736474ef754e128a54fb78632f57b48fd
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Thu Feb 21 17:27:49 2008 +0100

    [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 2242f5369822bc7780db95c47985bb408ea9157b
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Thu Feb 21 17:27:41 2008 +0100

    [new uImage] Rename and move print_image_hdr() routine

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Thu Feb 21 17:20:20 2008 +0100

    [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines

    Introducing routines for parsing new uImage format bootm arguments:
    [<addr>]#<conf>		- configuration specification
    [<addr>]:<subimg>	- subimage specification

    New format images can contain multiple subimages of the same type. For example
    a single new format image file can contain three kernels, two ramdisks and a
    couple of FDT blobs. Subimage and configuration specifications are extensions
    to bootm (and other image-related commands) arguments' syntax that allow to
    specify which particular subimage should be operated on.

    Subimage specification is used to denote a particular subimage. Configurations
    are a bit more complex -- they are used to define a particualr booting setup,
    for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
    etc.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Thu Feb 21 17:20:19 2008 +0100

    [new uImage] Add gen_get_image() routine

    This routine assures that image (whether legacy or FIT) is not
    in a special dataflash storage.

    If image address is a dataflash address image is moved to system RAM.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Thu Feb 21 17:20:18 2008 +0100

    [new uImage] Pull in libfdt if CONFIG_FIT is enabled

    New uImage format (Flattened Image Tree) requires libfdt
    functionality, print out error message if CONFIG_OF_LIBFDT
    is not defined.

    New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
    This commit turns it on by default.

    Signed-off-by: Marian Balakowicz <m8@semihalf.com>

commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
Author: Michael Schwingen <michael@schwingen.org>
Date:	Mon Feb 18 23:16:35 2008 +0100

    CFI: Do not use uninitialized cmd_reset

    Do not use uninitialized cmd_reset; issue both AMD and Intel reset
    commands instead

    From a short test, it looks like AMD-style flash roms treat *any* unknown
    command write as a reset, at least when in CFI Query mode, so issuing the
    Intel reset command to AMD-style flashs seems safe (from the small sample I
    have), plus the 3-cycle magic sequence should kick the state machine into
    the right state even without a reset command. Since the AMD-style flashs
    require the unlock sequence for real operation, I chose to try the AMD reset
    command first, so that Intel flashs do no see an invalid command prior to
    the CFI query.

    I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
    plus Intel StrataFlash.

    Signed-off-by: Michael Schwingen <michael@schwingen.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
Author: Rafal Jaworowski <raj@semihalf.com>
Date:	Thu Feb 21 11:56:44 2008 +0100

    API: Add (c) and licensing notice to the public API header.

    Signed-off-by: Rafal Jaworowski <raj@semihalf.com>

commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
Author: Yuri Tikhonov <yur@emcraft.com>
Date:	Thu Feb 21 11:06:07 2008 +0100

    Fix CPU POST test failure

    The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
    ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
    by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
    This patch just saves the CR value before running the test code, so allowing
    it to do anything it wants with CR.

    Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
    Acked-by: Yuri Tikhonov <yur@emcraft.com>
    --

commit d5908b093955415f3d340706378b991f911af671
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Feb 20 15:26:51 2008 -0600

    8610HPCD: Document the flashbank selection switches.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit a551cee99ad1d1da20fd23ad265de47448852f56
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Feb 20 14:22:26 2008 -0600

    86xx: Fix GUR PCI config registers properly.

    Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
    I tried to "8610HPCD: Fix typos in two PCI setup registers", I
    botched it due to not realizing that 8610 and 8641 had different
    Global Utility Register defintions, one of which was like 85xx,
    and the other wasn't.  Correct this problem by introducing two
    symbols, one for each 86xx SoC, but neither of which is named
    anything like 85xx.

    My bad.  Lovely Wednesday with git bisect.	You know.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit cb06eb961bdffc8728b38c242473d802e83ab2b4
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Feb 20 12:24:11 2008 -0600

    8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.

    Without an actual supported video card hooked up, enabling
    the CONFIG_VIDEO by default just makes it look broken by
    routing all console output to the video card.   Don't.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 4d264eff4312f230776b913edade7ceb75f1b1e0
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jan 30 15:08:15 2008 -0600

    ColdFire: Fix missing code flash size for M5485EVB

    Signed-off-by: James Mahan <kmahan@freescale.com>
    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Date:	Wed Jan 30 15:04:42 2008 -0600

    ColdFire: Fix 5282 and 5271 interrupt mask bit

    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Feb 19 12:31:08 2008 -0600

    8610HPCD: Fix typos in two PCI setup registers.

    The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
    were erroneously present as 85xx names and values, leftover from
    the clone wars.  Fix this by removing the 85xx cruft from the
    86xx codebase.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
Author: Jon Loeliger <jdl@freescale.com>
Date:	Mon Feb 18 14:01:56 2008 -0600

    86xx: Convert sbc8641d to use libfdt.

    This is the proper fix for a missing closing brace in the function
    ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
    The ft_cpu_setup() function in mpc8641hpcn.c should have been
    removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
    but was missed.  Only, the sbc8641d was nominally still using it.
    It all got ripped out, and the funcality that was in ft_board_setup()
    was refactored to remove the CPU portions into the new file
    cpu/mpc86xx/fdt.c instead.	Make sbc8641d use this now.

    Based loosely on an original patch from joe.hamman@embeddedspecialties.com

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 04efddc87c50c84f85dad5c331c634a6ce830a83
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 23:35:31 2008 +0100

    mpc86xx: Fix unused variable 'config' and 'immap'

    and remove useless CONFIG_DDR_INTERLEAVE

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 23:03:36 2008 +0100

    mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit b6f29c84c208a091f95a10cbc9852d729659ba20
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 14:15:31 2008 +0100

    s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 14:15:32 2008 +0100

    pxa: fix assignment from incompatible pointer type

    fix mmc_bread function prototype

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 64d792063fff90b8118179b092feee09fe5cae13
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 17 14:15:30 2008 +0100

    at91cap9adk: fix implicit declaration of function 'eth_init'

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Feb 17 15:43:44 2008 +0100

    Remove files added by mistake, update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
Author: Mike Nuss <mike@terascala.com>
Date:	Wed Feb 6 11:10:11 2008 -0500

    PPC440EPx: Optionally enable second I2C bus

    The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
    PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
    code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.

    Signed-off-by: Mike Nuss <mike@terascala.com>
    Cc: Stefan Roese <sr@denx.de>

commit ef5b4f221c22d05770878513951745f236b5b43f
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Tue Feb 5 10:26:44 2008 +0100

    ppc4xx: HCU4/5. Cleanup configs

    - hcu4.h: Removed define of CONFIG_PPC405GPr
    - Corrected phy addresses
    - Fix boot variables
    - Respect line length of 80 chars

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit 74973126d1be63ac75bdc192f46234dca3a7c421
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Tue Feb 5 11:31:28 2008 +0100

    ppc4xx: HCU4/5. Cleanups

    - Fix some coding style violations.
    - Use in/out_u16/32 where appropriate.
    - Use register names from ppc405.h.
    - Fix trace useage for Lauterbach.
    - Remove obsolete generation HCU2.
    - Renamed fixed_hcu4_sdram to init_ppc405_sdram.

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:	Tue Feb 5 10:26:41 2008 +0100

    ppc4xx: PPC405GPr fix missing register definitions

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit 214398d9cb22268d9d4f7563359edca0f78297a2
Author: Larry Johnson <lrj@acm.org>
Date:	Fri Jan 18 21:49:05 2008 -0500

    ppc4xx: Beautify configuration files for Sequoia and Korat boards

    Signed-off-by: Larry Johnson <lrj@acm.org>

commit 30c6a241e88499f536e86d325759e29ba00ff67f
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Feb 15 20:09:01 2008 +0100

    Wipe out assembler warnings while compiling x86 biosemu

    This patch tries to get rid of some assembler warnings about
    changed .got2 section type while compiling x86 bios emulator
    code.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Feb 15 00:57:09 2008 +0100

    Prepare v1.3.2-rc1 release candidate

commit f33e9653c9c09868995d788511d573771c209fe5
Author: Anatolij Gustschin <agust@denx.de>
Date:	Fri Feb 15 00:13:20 2008 +0100

    Fix compile warning on lib_ppc/board.c

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Feb 14 18:22:04 2008 +0100

    Add Radeon Mobility 9200 pci device id to the radeon driver

    This patch extends PCI device id table of the
    radeon driver so that the driver will also support
    Radeon Mobility 9200 (M9+) based boards.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 1b8607e1f7143548c6062c28371449ec69588c00
Author: Anatolij Gustschin <agust@denx.de>
Date:	Thu Feb 14 18:19:50 2008 +0100

    Extend ATI Radeon driver to support more video modes

    Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
    800x600, 640x480 at 24, 16 and 8 bpp.

    Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit 4124382de029d361162a4b8cecc773eb8f26e2a8
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Sun Feb 10 17:05:20 2008 +0100

    xsengine: fix typo and few coding style

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Fri Feb 8 21:25:58 2008 +0100

    Fix wrong memory limit calculation in memory-test

    If the length of the memory address range passed to the "mtest" command is
    not of the form 2^x - 1, not all address lines are tested. This bug is
    inherited from the original software at
    http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
    this.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
Author: Wolfgang Denk <wd@denx.de>
Date:	Fri Feb 15 00:11:39 2008 +0100

    Coding STyle cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f6921e3dc331293c873ec4d109fd5517a42a90b3
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Tue Feb 5 13:30:43 2008 +0900

    sh: Fix register address of SH7722

    The address of SH7722 is wrong by old document.
    This patch fixes this problem.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Feb 4 17:44:23 2008 -0500

    only update version header as needed

    Constantly rebuilding the version header will force useless relinking, so we
    simply need to compare the new header with the existing one before updating
    it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 208447f8e953f347425eb92c8e28d59e6d911363
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Mon Jan 28 05:56:19 2008 -0500

    Do not specify a CROSS_COMPILE default when executing size

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date:	Wed Feb 13 11:19:19 2008 +0100

    Fix return value of mtest when CFG_ALT_MEMTEST set

    Fix a missing return statement from a non-void function.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
Author: Timur Tabi <timur@freescale.com>
Date:	Wed Jan 9 14:35:26 2008 -0600

    85xx, 86xx: Determine I2C clock frequencies and store in global_data

    Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.

    Update the get_clocks() function in 85xx and 86xx to determine the I2C
    clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Feb 14 23:18:01 2008 +0100

    TQM834x: clean up configuration

    Get board name consistent with Linux and elsewhere;
    get rid of local network definitions etc.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 38cc09c55b1d7f233789052c6fc462e5377669a9
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:	Thu Feb 14 08:02:12 2008 +0100

    TFTP: fix search of ':' in BootFile

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0bc9efada170096c6b273f19165e32936d330d80
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Feb 14 22:46:55 2008 +0100

    Coding style cleanup; update CHANGELOG.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Feb 14 22:43:22 2008 +0100

    PPC: Use r2 instead of r29 as global data pointer

    R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
    will refuse to use load/store multiple insns; instead, it issues a
    list of simple load/store instructions upon function entry and exit,
    resulting in bigger code size, which in turn makes the build for a
    few boards fail.

    Use r2 instead.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3c234efa693bc59906c2be55c7918ecbb55392ea
Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Date:	Wed Jan 30 09:08:49 2008 +0100

    ARM: make the machid configurable via the environment

    If the variable "machid" exists, let do_bootm_linux use that instead
    of bd->bi_arch_number.