]>
Commit | Line | Data |
---|---|---|
c83bf6a2 | 1 | ====================================================================== |
b2daeb8e | 2 | Changes for U-Boot 1.0.2: |
c83bf6a2 WD |
3 | ====================================================================== |
4 | ||
855a496f WD |
5 | * Patches by Travis Sawyer, 12 Mar 2004: |
6 | - Fix Gigabit Ethernet support for 440GX | |
7 | - Add Gigabit Ethernet Support to MII PHY utilities | |
8 | ||
9 | * Patch by Brad Kemp, 12 Mar 2004: | |
10 | Fixes for drivers/cfi_flash.c: | |
11 | - Better support for x8/x16 implementations | |
12 | - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE | |
13 | - Added defines for AMD command and address constants | |
14 | ||
15 | * Patch by Leon Kukovec, 12 Mar 2004: | |
16 | Fix get_dentfromdir() to correctly handle deleted dentries | |
42dfe7a1 | 17 | |
855a496f WD |
18 | * Patch by George G. Davis, 11 Mar 2004: |
19 | Remove hard coded network settings in TI OMAP1610 H2 | |
20 | default board config | |
21 | ||
22 | * Patch by George G. Davis, 11 Mar 2004: | |
23 | add support for ADS GraphicsClient+ board. | |
24 | ||
4b248f3f WD |
25 | * Patch by Pierre Aubert, 11 Mar 2004: |
26 | - add bitmap command and splash screen support in cfb console | |
27 | - add [optional] origin in the bitmap display command | |
28 | ||
29 | * Patch by Travis Sawyer, 11 Mar 2004: | |
30 | Fix ocotea board early init interrupt setup. | |
31 | ||
32 | * Patch by Thomas Viehweger, 11 Mar 2004: | |
33 | Remove redundand code; add PCI-specific bits to include/mpc8260.h | |
34 | ||
aaf224ab WD |
35 | * Patch by Stephan Linz, 09 Mar 2004 |
36 | - Add support for the SSV ADNP/ESC1 (Nios Softcore) | |
37 | ||
38 | * Patch by George G. Davis, 9 Mar 2004: | |
39 | fix recent build failure for SA1100 target | |
40 | ||
41 | * Patch by Travis Sawyer, 09 Mar 2004: | |
42 | Support native interrupt mode for the IBM440GX. | |
43 | Previously it was running in 440GP compatibility mode. | |
44 | ||
3d3befa7 WD |
45 | * Patch by Philippe Robin, 09 Mar 2004: |
46 | Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference | |
47 | Platform support. | |
48 | ||
49 | * Patch by Masami Komiya, 08 Mar 2004: | |
50 | Don't overwrite server IP address or boot file name | |
51 | when the boot server does not return values | |
52 | ||
53 | * Patch by listmember@orkun.us, 5 Mar 2004: | |
54 | Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC | |
55 | ||
4d13cbad WD |
56 | * Patch by Tolunay Orkun, 5 Mar 2004: |
57 | Fix early board initialization for Cogent CSB272 board | |
58 | ||
59 | * Patch by Ed Okerson, 3 Mar 2004: | |
60 | fix CFI flash writes for little endian systems | |
61 | ||
62 | * Patch by Reinhard Meyer, 01 Mar 2004: | |
63 | generalize USB and IDE support for MPC5200 with according | |
64 | changes to IceCube.h and TOP5200.h | |
65 | add Am29LV256 256 MBit FLASH support for TOP5200 boards | |
66 | add info about USB and IDE to README | |
67 | ||
c3f9d493 WD |
68 | * Patch by Yuli Barcohen, 4 Mar 2004: |
69 | Fix problems with GCC 3.3.x which changed handling of global | |
70 | variables explicitly initialized to zero (now in .bss instead of | |
71 | .data as before). | |
72 | ||
73 | * Patch by Leon Kukovec, 02 Mar 2004: | |
74 | add strswab() to fix IDE LBA capacity, firmware and model numbers | |
75 | on little endian machines | |
76 | ||
77 | * Patch by Masami Komiya, 02 Mar 2004: | |
78 | - Remove get_ticks() from NFS code | |
79 | - Add verification of RPC transaction ID | |
80 | ||
81 | * Patch by Pierre Aubert, 02 Mar 2004: | |
82 | cleanup for IDE and USB drivers for MPC5200 | |
83 | ||
84 | * Patch by Travis Sawyer, 01 Mar 2004: | |
0e6d798c WD |
85 | Ocotea: |
86 | - Add IBM PPC440GX Ref Platform support (Ocotea) | |
87 | Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> | |
88 | Adapted to U-Boot and 440GX port | |
89 | 440gx_enet.c: | |
90 | - Add gracious handling of all Ethernet Pin Selections for 440GX | |
91 | - Add RGMII selection for Cicada CIS8201 Gigabit PHY | |
92 | ppc440.h: | |
93 | - Add needed bit definitions | |
94 | - Fix formatting | |
95 | ||
96 | * Patch by Carl Riechers, 1 Mar 2004: | |
97 | Add PPC440GX prbdv0 divider to fix memory clock calculation. | |
98 | ||
99 | * Patch by Stephan Linz, 27 Feb 2004 | |
100 | - avoid problems for targets without NFS download support | |
101 | ||
c40b2956 WD |
102 | * Patch by Rune Torgersen, 27 Feb 2004: |
103 | - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) | |
104 | - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) | |
105 | - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) | |
106 | ||
107 | * Patch by Masami Komiya, 27 Feb 2004: | |
108 | Fix rarpboot: add autoload by NFS | |
109 | ||
110 | * Patch by Dan Eisenhut, 26 Feb 2004: | |
111 | fix flash_write return value in saveenv | |
112 | ||
113 | * Patch by Stephan Linz, 11 Dec 2003 | |
114 | expand config.mk to avoid trigraph warnings on NIOS | |
115 | ||
116 | * Rename "BMS2003" board into "HMI10" | |
117 | ||
6629d2f2 WD |
118 | * SX1 patches: use "serial#" for USB serial #; use redundand environment |
119 | storage; auto-set console on USB port (using preboot command) | |
120 | ||
232c150a WD |
121 | * Add support for SX1 mobile phone; add support for USB-based console |
122 | (enable with "setenv stdout usbtty; setenv stdin usbtty") | |
123 | ||
79d696fc WD |
124 | * Fix LOWBOOT configuration for MPC5200 with DDR memory |
125 | ||
f8d813e3 WD |
126 | * Fix SDRAM timings for LITE5200 / IceCube board |
127 | ||
128 | * Handle Auti-MDIX / connection status for INCA-IP | |
129 | ||
130 | * Fix USB problems when attempting to read 0 bytes | |
131 | ||
e7c85689 WD |
132 | * Patch by Travis Sawyer, 26 Feb 2004: |
133 | Fix broken compile for XPEDITE1K target. | |
134 | ||
135 | * Patch by Stephan Linz, 26 Feb 2004: | |
136 | Bug fix for NFS code on NIOS targets | |
232c150a | 137 | |
e7c85689 WD |
138 | * Patch by Stephen Williams, 26 Feb 2004: |
139 | Break up SystemACE reads of large block counts | |
140 | ||
132ba5fd WD |
141 | * Patch by Pierre Aubert, 26 Feb 2004 |
142 | add IDE support for MPC5200 | |
143 | ||
144 | * Patch by Masami Komiya, 26 Feb 2004: | |
145 | add autoload via NFS | |
146 | ||
147 | * Patch by Stephen Williams | |
148 | Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses | |
149 | elsewhere in the source. | |
150 | ||
11dadd54 WD |
151 | * Patch by Steven Scholz, 25 Feb 2004: |
152 | - Timeouts in FPGA code should be based on CFG_HZ | |
153 | - Minor cleanup in code for Altera FPGA ACEX1K | |
154 | ||
155 | * Patch by Steven Scholz, 25 Feb 2004: | |
156 | Changed "Directory Hierarchy" section in README | |
157 | ||
158 | * Patch by Masami Komiya, 25 Feb 2004: | |
159 | Reduce copy count in nfs_read_reply() of NFS code | |
160 | ||
80885a9d WD |
161 | * Patch by Markus Pietrek, 24 Feb 2004: |
162 | NS9750 DevBoard added | |
163 | ||
132ba5fd | 164 | * Patch by Pierre Aubert, 24 Feb 2004 |
80885a9d WD |
165 | add USB support for MPC5200 |
166 | ||
167 | * Patch by Steven Scholz, 24 Feb 2004: | |
168 | - fix MII commands to use values from last command | |
169 | ||
170 | * Patch by Torsten Demke, 24 Feb 2004: | |
171 | Add support for the eXalion platform (SPSW-8240, F-30, F-300) | |
172 | ||
0c852a28 WD |
173 | * Patch by Rahul Shanbhag, 19 Feb 2004: |
174 | Fixes for for OMAP1610 board: | |
175 | - shift some IRQ specific code to platform.S file | |
176 | - remove duplicatewatchdog reset code from start.S | |
177 | ||
178 | * Make Auto-MDIX Support configurable on INCA-IP board | |
179 | ||
180 | * Fix license for mkimage tool | |
181 | ||
a084f7da WD |
182 | * Patch by Masami Komiya, 24 Feb 2004: |
183 | Update NetBootFileXferSize in NFS code | |
184 | ||
185 | * Patch by Scott McNutt, 24 Feb 2004: | |
186 | fix packet length in NFS code | |
187 | ||
cbd8a35c WD |
188 | * Patch by Masami Komiy, 22 Feb 2004: |
189 | Add support for NFS for file download | |
190 | ||
074cff0d WD |
191 | * Patch by Andrea Scian, 17 Feb 2004: |
192 | Add support for S3C44B0 processor and DAVE B2 board | |
193 | ||
194 | * Patch by Steven Scholz, 20 Feb 2004: | |
195 | - Add support for MII commands on AT91RM9200 boards | |
196 | - some cleanup in AT91RM9200 ethernet code | |
197 | ||
028ab6b5 WD |
198 | * Patch by Peter Ryser, 20 Feb 2004: |
199 | Add support for the Xilinx ML300 platform | |
200 | ||
201 | * Patch by Stephan Linz, 17 Feb 2004: | |
202 | Fix watchdog support for NIOS | |
203 | ||
204 | * Patch by Josh Fryman, 16 Feb 2004: | |
205 | Fix byte-swapping for cfi_flash.c for different bus widths | |
206 | ||
207 | * Patch by Jon Diekema, 14 Jeb 2004: | |
208 | Remove duplicate "FPGA Support" notes from the README file | |
209 | ||
63e73c9a WD |
210 | * Patches by Reinhard Meyer, 14 Feb 2004: |
211 | - update board/emk tree; use common flash driver | |
212 | - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c | |
213 | [adapted for other PPC CPUs -- wd] | |
214 | - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c | |
215 | ||
216 | * Patch by Jon Diekema, 13 Feb 2004: | |
217 | Call show_boot_progress() whenever POST "FAILED" is printed. | |
218 | ||
219 | * Patch by Nishant Kamat, 13 Feb 2004: | |
220 | Add support for TI OMAP1610 H2 Board | |
221 | Fixes for cpu/arm926ejs/interrupt.c | |
222 | (based on Richard Woodruff's patch for arm925, 16 Oct 03) | |
223 | Fix for a timer bug in OMAP1610 Innovator | |
224 | Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 | |
225 | ||
226 | * Patches by Stephan Linz, 12 Feb 2004: | |
227 | - add support for NIOS timer with variable period preload counter value | |
228 | - prepare POST framework support for NIOS targets | |
229 | ||
230 | * Patch by Denis Peter, 11 Feb 2004: | |
231 | add POST support for the MIP405 board | |
232 | ||
cd0a9de6 WD |
233 | * Patch by Laurent Mohin, 10 Feb 2004: |
234 | Fix buffer overflow in common/usb.c | |
235 | ||
236 | * Patch by Tolunay Orkun, 10 Feb 2004: | |
237 | Add support for Cogent CSB272 board | |
238 | ||
2d1a537d WD |
239 | * Patch by Thomas Elste, 10 Feb 2004: |
240 | Add support for NET+50 CPU and ModNET50 board | |
241 | ||
242 | * Patch by Sam Song, 10 Feb 2004: | |
243 | Fix typos in cfi_flash.c | |
244 | ||
245 | * Patch by Leon Kukovec, 10 Feb 2004 | |
246 | Fixed long dir entry slot id calculation in get_vfatname | |
247 | ||
248 | * Patch by Robin Gilks, 10 Feb 2004: | |
249 | add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, | |
250 | !=, <>, <, >, <=, >=) | |
251 | ||
3f85ce27 WD |
252 | * Fix problem with side effects in macros in include/usb.h |
253 | ||
254 | * Patch by David Benson, 13 Nov 2003: | |
255 | bug 841358 - fix TFTP download size limit | |
256 | ||
257 | * Fixing bug 850768: | |
258 | improper flush_cache() in load_serial() | |
259 | ||
260 | * Fixing bug 834943: | |
261 | MPC8540 - missing volatile declarations | |
262 | ||
263 | * Patch by Stephen Williams, 09 Feb 2004: | |
264 | Add support for Xilinx SystemACE chip: | |
265 | - New files common/cmd_ace.c and include/systemace.h | |
266 | - Hook systemace support into cmd_fat and the partition manager | |
267 | ||
268 | * Patch by Travis Sawyer, 09 Feb 2004: | |
269 | Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux | |
270 | ||
3c74e32a WD |
271 | * Patch by Travis Sawyer, 09 Feb 2004: |
272 | o 440GX: | |
273 | - Fix PCI Indirect access for type 1 config cycles with ppc440. | |
274 | - Add phymode for 440 enet | |
275 | - fix pci pre init | |
276 | o XPedite1K: | |
277 | - Change board_pre_init to board_early_init_f | |
278 | - Add user flash to bus controller setup | |
279 | - Fix pci pre init | |
280 | - Fix is_pci_host to check GPIO for monarch bit | |
281 | - Force xpedite1k to pci conventional mode (via #define option) | |
282 | ||
283 | * Patch by Brad Kemp, 4 Feb 2004: | |
284 | - handle the machine check that is generated during the PCI scans | |
285 | on 82xx processors. | |
286 | - define the registers used in the IMMR by the PCI subsystem. | |
287 | ||
288 | * Patch by Pierre Aubert, 03 Feb 2004: | |
289 | cpu/mpc5xxx/start.S: copy MBAR into SPR311 | |
290 | ||
291 | * Patch by Jeff Angielski, 03 Feb 2004: | |
292 | Fix copy & paste error in cpu/mpc8260/pci.c | |
293 | ||
294 | * Patch by Reinhard Meyer, 24 Jan 2004: | |
295 | Fix typo in cpu/mpc5xxx/pci_mpc5200.c | |
296 | ||
cf56e110 WD |
297 | * Add Auto-MDIX support for INCA-IP |
298 | ||
bf9e3b38 WD |
299 | * Some code cleanup |
300 | ||
301 | * Patch by Josef Baumgartner, 10 Feb 2004: | |
302 | Fixes for Coldfire port | |
303 | ||
304 | * Patch by Brad Kemp, 11 Feb 2004: | |
305 | Fix CFI flash driver problems | |
306 | ||
a2d18bb7 WD |
307 | * Make sure to use a bus clock divider of 2 only when running TQM8xxM |
308 | modules at CPU clock frequencies above 66 MHz. | |
bf9e3b38 | 309 | |
a2d18bb7 WD |
310 | * Optimize flash programming speed for LWMON (by another 100% :-) |
311 | ||
cd37d9e6 WD |
312 | * Patch by Jian Zhang, 3 Feb 2004: |
313 | - Changed the incorrect FAT12BUFSIZE | |
314 | - data_begin in fsdata can be negative. Changed it to be short. | |
315 | ||
ec4c544b WD |
316 | * Patches by Stephan Linz, 30 Jan 2004: |
317 | 1: - board/altera/common/flash.c:flash_erase(): | |
318 | o allow interrupts befor get_timer() call | |
319 | o check-up each erased sector and avoid unexpected timeouts | |
320 | - board/altera/dk1c20/dk1s10.c:board_early_init_f(): | |
321 | o enclose sevenseg_set() in cpp condition | |
322 | - remove the ASMI configuration for DK1S10_standard_32 (never present) | |
323 | - fix some typed in mistakes in the NIOS documentation | |
324 | 2: - split DK1C20 configuration into several header files: | |
325 | o two new files for each NIOS CPU description | |
326 | o U-Boot related part is remaining in DK1C20.h | |
327 | 3: - split DK1S10 configuration into several header files: | |
328 | o two new files for each NIOS CPU description | |
329 | o U-Boot related part is remaining in DK1S10.h | |
330 | 4: - Add support for the Microtronix Linux Development Kit | |
331 | NIOS CPU configuration at the Altera Nios Development Kit, | |
332 | Stratix Edition (DK-1S10) | |
333 | 5: - Add documentation for the Altera Nios Development Kit, | |
334 | Stratix Edition (DK-1S10) | |
335 | 6: - Add support for the Nios Serial Peripharel Interface (SPI) | |
336 | (master only) | |
337 | 7: - Add support for the common U-Boot SPI framework at | |
338 | RTC driver DS1306 | |
339 | ||
b98fff1d WD |
340 | * Patch by Rahul Shanbhag, 28 Jan 2004: |
341 | Fix flash protection/locking handling for OMAP1610 innovator board. | |
342 | ||
343 | * Patch by Rolf Peukert, 28 Jan 2004: | |
344 | fix flash write problems on CSB226 board (write with 32 bit bus width) | |
345 | ||
346 | * Patches by Mark Jonas, 16 Jan 2004: | |
347 | - fix rounding error when calculating baudrates for MPC5200 PSCs | |
348 | - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same | |
349 | time which is not supported | |
350 | ||
5653fc33 WD |
351 | * Patch by Yuli Barcohen, 26 Jan 2004: |
352 | Allow bzip2 compression for small memory footprint boards | |
353 | ||
354 | * Patch by Brad Kemp, 21 Jan 2004: | |
355 | Add support for CFI flash driver for both the Intel and the AMD | |
356 | command sets. | |
357 | ||
358 | * Patch by Travis Sawyer, 20 Jan 2004: | |
359 | Fix pci bridge auto enumeration of sibling p2p bridges. | |
360 | ||
361 | * Patch by Tolunay Orkun, 12 Jan 2004: | |
362 | Add some delays as needed for Intel LXT971A PHY support | |
363 | ||
364 | * Patches by Stephan Linz, 09 Jan 2004: | |
365 | - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c | |
366 | - make DK1C20 board configuration related to ASMI conform to | |
367 | documentation | |
368 | ||
f6e20fc6 WD |
369 | * Patch by Anders Larsen, 09 Jan 2004: |
370 | ||
371 | ARM memory layout fixes: the abort-stack is now set up in the | |
372 | correct RAM area, and the BSS is zeroed out as it should be. | |
373 | ||
374 | Furthermore, the magic variables 'armboot_end' and 'armboot_end_data' | |
375 | of the linker scripts are replaced by '__bss_start' and '_end', | |
376 | resp., which is a further step to eliminate unnecessary differences | |
377 | between the implementation of the CPU architectures. | |
378 | ||
f4863a7a WD |
379 | * Patch by liang a lei, 9 Jan 2004: |
380 | Fix Intel 28F128J3 ID in include/flash.h | |
381 | ||
382 | * Patch by Masami Komiya, 09 Jan 2004: | |
383 | add support for TB0229 board (NEC VR4131 MIPS processor) | |
384 | ||
385 | * Patch by Leon Kukovec, 12 Dec 2003: | |
386 | changed extern __inline__ into static __inline__ in | |
387 | include/linux/byteorder/swab.h | |
388 | ||
ba56f625 WD |
389 | * Patch by Travis Sawyer, 30 Dec 2003: |
390 | Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, | |
391 | select MDI port based on enabled EMAC device. | |
392 | Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX | |
393 | base PrPMC board. | |
394 | ||
a6cccaea WD |
395 | * Patch by Wolter Kamphuis, 15 Dec 2003: |
396 | made CONFIG_SILENT_CONSOLE usable on all architectures | |
397 | ||
398 | * Disable date command on TQM866M - there is no RTC on MPC866 | |
399 | ||
75d1ea7f WD |
400 | * Fix variable CPU clock for MPC859/866 systems for low CPU clocks |
401 | ||
68766094 WD |
402 | * Implement adaptive SDRAM timing configuration based on actual CPU |
403 | clock frequency for INCA-IP; fix problem with board hanging when | |
404 | switching from 150MHz to 100MHz | |
405 | ||
406 | * Add PCMCIA CS support for BMS2003 board | |
407 | ||
c178d3da WD |
408 | * Add variable CPU clock for MPC859/866 systems (so far only TQM866M): |
409 | see doc/README.MPC866 for details; | |
410 | implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866; | |
411 | calculate CPU clock frequency from PLL register values. | |
412 | ||
413 | * Add support for 128 MB RAM on TQM8xxL/M modules | |
414 | ||
ef978730 WD |
415 | * Fix PS/2 keyboard problem caused by statically initialized variable |
416 | pointing to a location in flash | |
417 | ||
418 | * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130. | |
419 | ||
c837dcb1 WD |
420 | * The PS/2 mux on the BMS2003 board needs 450 ms after power on |
421 | before we can access it; add delay in case we are faster (with no | |
422 | CF card inserted) | |
423 | ||
424 | * Cleanup of some init functions | |
425 | ||
426 | * Make sure SCC Ethernet is always stopped by the time we boot Linux | |
427 | to avoid Linux crashes by early packets coming in. | |
428 | ||
429 | * Accelerate flash accesses on LWMON board by using buffered writes | |
430 | ||
b0aef11c WD |
431 | * Fix typo in Makefile; |
432 | fix problem with PARTNUM detection | |
433 | ||
1c43771b WD |
434 | * Patch by Reinhard Meyer, 09 Jan 2004: |
435 | - add RTC support for MPC5200 based boards (requires RTC_XTAL) | |
436 | ||
437 | * Add support for IDE LED on BMS2003 board | |
438 | (exclusive with status LED!) | |
439 | ||
440 | * Add support for PS/2 keyboard (used with PS/2 multiplexor on | |
441 | BMS2003 board) | |
442 | ||
443 | * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004: | |
444 | Add common files for "emk" boards | |
445 | ||
c83bf6a2 WD |
446 | * Add a common get_ram_size() function and modify the the |
447 | board-specific files to invoke that common implementation. | |
448 | ||
5cf9da48 | 449 | ====================================================================== |
b34ff81d | 450 | Changes for U-Boot 1.0.1: |
5cf9da48 WD |
451 | ====================================================================== |
452 | ||
b34ff81d WD |
453 | * Set default clock for INCA-IP to 150 MHz |
454 | ||
a522fa0e WD |
455 | * Make BMS2003 use a separate config file to avoid #ifdef mess; |
456 | add I2C support; add support for DS1337 RTC | |
457 | ||
458 | * Add CompactFlash support for BMS2003 board | |
459 | ||
460 | * Add support for status LED on BMS2003 board | |
461 | ||
180d3f74 WD |
462 | * Patch by Scott McNutt, 02 Jan 2004: |
463 | Add support for the Nios Active Serial Memory Interface (ASMI) | |
464 | on Cyclone devices | |
465 | ||
466 | * Patch by Andrea Marson, 16 Dec 2003: | |
467 | Add support for the PPChameleon ME and HI modules | |
468 | ||
469 | * Patch by Yuli Barcohen, 22 Dec 2003: | |
470 | Add support for Motorola DUET ADS board (MPC87x/88x) | |
471 | ||
dd875c76 WD |
472 | * Patch by Robert Schwebel, 15 Dec 2003: |
473 | add support for cramfs (uses JFFS2 command interface) | |
474 | ||
c935d3bd WD |
475 | * Patches by Stephan Linz, 11 Dec 2003: |
476 | - more documentation for NIOS port | |
477 | - new struct nios_pio_t, struct nios_spi_t | |
478 | - Reconfiguration for NIOS Development Kit DK1C20: | |
479 | o move board related code from board/dk1c20 | |
480 | to board/altera/dk1c20 | |
481 | o create a new common source path board/altera/common | |
482 | and move generic flash access stuff into it | |
483 | o change/expand configuration file DK1C20.h | |
484 | - Add support for NIOS Development Kit DK1S10 | |
485 | - Add status LED support for NIOS systems | |
486 | - Add dual 7-segment LED support for Altera NIOS DevKits | |
487 | ||
3a473b2a WD |
488 | * Patch by Ronen Shitrit, 10 Dec 2003: |
489 | Add support for the Marvell DB64360 / DB64460 development boards | |
490 | ||
491 | * Patch by Detlev Zundel, 10 Dec 2003: | |
492 | fix dependency problem in examples/Makefile | |
493 | ||
b6e4c403 WD |
494 | * Patch by Denis Peter, 8 Dec 2003 |
495 | - add support for the PATI board (MPC555) | |
496 | - add SPI support for the MPC5xx | |
497 | ||
498 | * Patch by Anders Larsen, 08 Dec 2003: | |
499 | add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG | |
500 | to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; | |
501 | cleanup some redundand #defines | |
502 | ||
63f34912 WD |
503 |