[people/ms/u-boot.git] / arch / arm / cpu / armv8 / fsl-layerscape / lowlevel.S

/*
 * (C) Copyright 2014-2015 Freescale Semiconductor
 *
 * SPDX-License-Identifier:	GPL-2.0+
 *
 * Extracted from armv8/start.S
 */

#include <config.h>
#include <linux/linkage.h>
#include <asm/gic.h>
#include <asm/macro.h>
#include <asm/arch-fsl-layerscape/soc.h>
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch-fsl-layerscape/immap_lsch3.h>
#endif
#include <asm/u-boot.h>

/* Get GIC offset
* For LS1043a rev1.0, GIC base address align with 4k.
* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
* is set, GIC base address align with 4K, or else align
* with 64k.
* output:
*	x0: the base address of GICD
*	x1: the base address of GICC
*/
ENTRY(get_gic_offset)
	ldr     x0, =GICD_BASE
#ifdef CONFIG_GICV2
	ldr     x1, =GICC_BASE
#endif
#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
	ldr     x2, =DCFG_CCSR_SVR
	ldr	w2, [x2]
	rev	w2, w2
	mov	w3, w2
	ands	w3, w3, #SVR_WO_E << 8
	mov	w4, #SVR_LS1043A << 8
	cmp	w3, w4
	b.ne	1f
	ands	w2, w2, #0xff
	cmp	w2, #REV1_0
	b.eq	1f
	ldr	x2, =SCFG_GIC400_ALIGN
	ldr	w2, [x2]
	rev	w2, w2
	tbnz	w2, #GIC_ADDR_BIT, 1f
	ldr     x0, =GICD_BASE_64K
#ifdef CONFIG_GICV2
	ldr     x1, =GICC_BASE_64K
#endif
1:
#endif
	ret
ENDPROC(get_gic_offset)

ENTRY(smp_kick_all_cpus)
	/* Kick secondary cpus up by SGI 0 interrupt */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
	mov	x29, lr			/* Save LR */
	bl	get_gic_offset
	bl	gic_kick_secondary_cpus
	mov	lr, x29			/* Restore LR */
#endif
	ret
ENDPROC(smp_kick_all_cpus)


ENTRY(lowlevel_init)
	mov	x29, lr			/* Save LR */

	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
1:

#ifdef CONFIG_FSL_LSCH3

	/* Set Wuo bit for RN-I 20 */
#ifdef CONFIG_ARCH_LS2080A
	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
	ldr	x1, =0x00000010
	bl	ccn504_set_aux

	/*
	 * Set forced-order mode in RNI-6, RNI-20
	 * This is required for performance optimization on LS2088A
	 * LS2080A family does not support setting forced-order mode,
	 * so skip this operation for LS2080A family
	 */
	bl	get_svr
	lsr	w0, w0, #16
	ldr	w1, =SVR_DEV_LS2080A
	cmp	w0, w1
	b.eq	1f

	ldr	x0, =CCI_AUX_CONTROL_BASE(6)
	ldr	x1, =0x00000020
	bl	ccn504_set_aux
	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
	ldr	x1, =0x00000020
	bl	ccn504_set_aux
1:
#endif

	/* Add fully-coherent masters to DVM domain */
	ldr	x0, =CCI_MN_BASE
	ldr	x1, =CCI_MN_RNF_NODEID_LIST
	ldr	x2, =CCI_MN_DVM_DOMAIN_CTL_SET
	bl	ccn504_add_masters_to_dvm

	/* Set all RN-I ports to QoS of 15 */
	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(0)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(0)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(0)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos

	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(2)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(2)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(2)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos

	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(6)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(6)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(6)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos

	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(12)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(12)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(12)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos

	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(16)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(16)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(16)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos

	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(20)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(20)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(20)
	ldr	x1, =0x00FF000C
	bl	ccn504_set_qos
#endif

#ifdef SMMU_BASE
	/* Set the SMMU page size in the sACR register */
	ldr	x1, =SMMU_BASE
	ldr	w0, [x1, #0x10]
	orr	w0, w0, #1 << 16  /* set sACR.pagesize to indicate 64K page */
	str	w0, [x1, #0x10]
#endif

	/* Initialize GIC Secure Bank Status */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
	branch_if_slave x0, 1f
	bl	get_gic_offset
	bl	gic_init_secure
1:
#ifdef CONFIG_GICV3
	ldr	x0, =GICR_BASE
	bl	gic_init_secure_percpu
#elif defined(CONFIG_GICV2)
	bl	get_gic_offset
	bl	gic_init_secure_percpu
#endif
#endif

100:
	branch_if_master x0, x1, 2f

#if defined(CONFIG_MP) && defined(CONFIG_ARMV8_MULTIENTRY)
	ldr	x0, =secondary_boot_func
	blr	x0
#endif

2:
	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
1:
#ifdef CONFIG_FSL_TZPC_BP147
	/* Set Non Secure access for all devices protected via TZPC */
	ldr	x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */
	orr	w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */
	str	w0, [x1]

	isb
	dsb	sy
#endif

#ifdef CONFIG_FSL_TZASC_400
	/*
	 * LS2080 and its personalities does not support TZASC
	 * So skip TZASC related operations
	 */
	bl	get_svr
	lsr	w0, w0, #16
	ldr	w1, =SVR_DEV_LS2080A
	cmp	w0, w1
	b.eq	1f

	/* Set TZASC so that:
	 * a. We use only Region0 whose global secure write/read is EN
	 * b. We use only Region0 whose NSAID write/read is EN
	 *
	 * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
	 * 	 placeholders.
	 */
#ifdef CONFIG_FSL_TZASC_1
	ldr	x1, =TZASC_GATE_KEEPER(0)
	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
	str	w0, [x1]

	ldr	x1, =TZASC_REGION_ATTRIBUTES_0(0)
	ldr	w0, [x1]		/* Region-0 Attributes Register */
	orr	w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
	orr	w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
	str	w0, [x1]

	ldr	x1, =TZASC_REGION_ID_ACCESS_0(0)
	ldr	w0, [x1]		/* Region-0 Access Register */
	mov	w0, #0xFFFFFFFF		/* Set nsaid_wr_en and nsaid_rd_en */
	str	w0, [x1]
#endif
#ifdef CONFIG_FSL_TZASC_2
	ldr	x1, =TZASC_GATE_KEEPER(1)
	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
	str	w0, [x1]

	ldr	x1, =TZASC_REGION_ATTRIBUTES_0(1)
	ldr	w0, [x1]		/* Region-1 Attributes Register */
	orr	w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
	orr	w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
	str	w0, [x1]

	ldr	x1, =TZASC_REGION_ID_ACCESS_0(1)
	ldr	w0, [x1]		/* Region-1 Attributes Register */
	mov	w0, #0xFFFFFFFF		/* Set nsaid_wr_en and nsaid_rd_en */
	str	w0, [x1]
#endif
	isb
	dsb	sy
#endif
100:
1:
#ifdef CONFIG_ARCH_LS1046A
	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
1:
	/* Initialize the L2 RAM latency */
	mrs   x1, S3_1_c11_c0_2
	mov   x0, #0x1C7
	/* Clear L2 Tag RAM latency and L2 Data RAM latency */
	bic   x1, x1, x0
	/* Set L2 data ram latency bits [2:0] */
	orr   x1, x1, #0x2
	/* set L2 tag ram latency bits [8:6] */
	orr   x1,  x1, #0x80
	msr   S3_1_c11_c0_2, x1
	isb
100:
#endif

#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
	bl	fsl_ocram_init
#endif

	mov	lr, x29			/* Restore LR */
	ret
ENDPROC(lowlevel_init)

#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
ENTRY(fsl_ocram_init)
	mov	x28, lr			/* Save LR */
	bl	fsl_clear_ocram
	bl	fsl_ocram_clear_ecc_err
	mov	lr, x28			/* Restore LR */
	ret
ENDPROC(fsl_ocram_init)

ENTRY(fsl_clear_ocram)
/* Clear OCRAM */
	ldr	x0, =CONFIG_SYS_FSL_OCRAM_BASE
	ldr	x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE)
	mov	x2, #0
clear_loop:
	str	x2, [x0]
	add	x0, x0, #8
	cmp	x0, x1
	b.lo	clear_loop
	ret
ENDPROC(fsl_clear_ocram)

ENTRY(fsl_ocram_clear_ecc_err)
	/* OCRAM1/2 ECC status bit */
	mov	w1, #0x60
	ldr	x0, =DCSR_DCFG_SBEESR2
	str	w1, [x0]
	ldr	x0, =DCSR_DCFG_MBEESR2
	str	w1, [x0]
	ret
ENDPROC(fsl_ocram_init)
#endif

#ifdef CONFIG_FSL_LSCH3
	.globl get_svr
get_svr:
	ldr	x1, =FSL_LSCH3_SVR
	ldr	w0, [x1]
	ret

hnf_pstate_poll:
	/* x0 has the desired status, return 0 for success, 1 for timeout
	 * clobber x1, x2, x3, x4, x6, x7
	 */
	mov	x1, x0
	mov	x7, #0			/* flag for timeout */
	mrs	x3, cntpct_el0		/* read timer */
	add	x3, x3, #1200		/* timeout after 100 microseconds */
	mov	x0, #0x18
	movk	x0, #0x420, lsl #16	/* HNF0_PSTATE_STATUS */
	mov	w6, #8			/* HN-F node count */
1:
	ldr	x2, [x0]
	cmp	x2, x1			/* check status */
	b.eq	2f
	mrs	x4, cntpct_el0
	cmp	x4, x3
	b.ls	1b
	mov	x7, #1			/* timeout */
	b	3f
2:
	add	x0, x0, #0x10000	/* move to next node */
	subs	w6, w6, #1
	cbnz	w6, 1b
3:
	mov	x0, x7
	ret

hnf_set_pstate:
	/* x0 has the desired state, clobber x1, x2, x6 */
	mov	x1, x0
	/* power state to SFONLY */
	mov	w6, #8			/* HN-F node count */
	mov	x0, #0x10
	movk	x0, #0x420, lsl #16	/* HNF0_PSTATE_REQ */
1:	/* set pstate to sfonly */
	ldr	x2, [x0]
	and	x2, x2, #0xfffffffffffffffc	/* & HNFPSTAT_MASK */
	orr	x2, x2, x1
	str	x2, [x0]
	add	x0, x0, #0x10000	/* move to next node */
	subs	w6, w6, #1
	cbnz	w6, 1b

	ret

ENTRY(__asm_flush_l3_dcache)
	/*
	 * Return status in x0
	 *    success 0
	 *    timeout 1 for setting SFONLY, 2 for FAM, 3 for both
	 */
	mov	x29, lr
	mov	x8, #0

	switch_el x0, 1f, 100f, 100f	/* skip if not in EL3 */

1:
	dsb	sy
	mov	x0, #0x1		/* HNFPSTAT_SFONLY */
	bl	hnf_set_pstate

	mov	x0, #0x4		/* SFONLY status */
	bl	hnf_pstate_poll
	cbz	x0, 1f
	mov	x8, #1			/* timeout */
1:
	dsb	sy
	mov	x0, #0x3		/* HNFPSTAT_FAM */
	bl	hnf_set_pstate

	mov	x0, #0xc		/* FAM status */
	bl	hnf_pstate_poll
	cbz	x0, 1f
	add	x8, x8, #0x2
100:
1:
	mov	x0, x8
	mov	lr, x29
	ret
ENDPROC(__asm_flush_l3_dcache)
#endif

#ifdef CONFIG_MP
	/* Keep literals not used by the secondary boot code outside it */
	.ltorg

	/* Using 64 bit alignment since the spin table is accessed as data */
	.align 4
	.global secondary_boot_code
	/* Secondary Boot Code starts here */
secondary_boot_code:
	.global __spin_table
__spin_table:
	.space CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE

	.align 2
ENTRY(secondary_boot_func)
	/*
	 * MPIDR_EL1 Fields:
	 * MPIDR[1:0] = AFF0_CPUID <- Core ID (0,1)
	 * MPIDR[7:2] = AFF0_RES
	 * MPIDR[15:8] = AFF1_CLUSTERID <- Cluster ID (0,1,2,3)
	 * MPIDR[23:16] = AFF2_CLUSTERID
	 * MPIDR[24] = MT
	 * MPIDR[29:25] = RES0
	 * MPIDR[30] = U
	 * MPIDR[31] = ME
	 * MPIDR[39:32] = AFF3
	 *
	 * Linear Processor ID (LPID) calculation from MPIDR_EL1:
	 * (We only use AFF0_CPUID and AFF1_CLUSTERID for now
	 * until AFF2_CLUSTERID and AFF3 have non-zero values)
	 *
	 * LPID = MPIDR[15:8] | MPIDR[1:0]
	 */
	mrs	x0, mpidr_el1
	ubfm	x1, x0, #8, #15
	ubfm	x2, x0, #0, #1
	orr	x10, x2, x1, lsl #2	/* x10 has LPID */
	ubfm    x9, x0, #0, #15         /* x9 contains MPIDR[15:0] */
	/*
	 * offset of the spin table element for this core from start of spin
	 * table (each elem is padded to 64 bytes)
	 */
	lsl	x1, x10, #6
	ldr	x0, =__spin_table
	/* physical address of this cpus spin table element */
	add	x11, x1, x0

	ldr	x0, =__real_cntfrq
	ldr	x0, [x0]
	msr	cntfrq_el0, x0	/* set with real frequency */
	str	x9, [x11, #16]	/* LPID */
	mov	x4, #1
	str	x4, [x11, #8]	/* STATUS */
	dsb	sy
#if defined(CONFIG_GICV3)
	gic_wait_for_interrupt_m x0
#elif defined(CONFIG_GICV2)
	bl	get_gic_offset
	mov	x0, x1
        gic_wait_for_interrupt_m x0, w1
#endif

slave_cpu:
	wfe
	ldr	x0, [x11]
	cbz	x0, slave_cpu
#ifndef CONFIG_ARMV8_SWITCH_TO_EL1
	mrs     x1, sctlr_el2
#else
	mrs     x1, sctlr_el1
#endif
	tbz     x1, #25, cpu_is_le
	rev     x0, x0                  /* BE to LE conversion */
cpu_is_le:
	ldr	x5, [x11, #24]
	ldr	x6, =IH_ARCH_DEFAULT
	cmp	x6, x5
	b.eq	1f

#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
	adr	x4, secondary_switch_to_el1
	ldr	x5, =ES_TO_AARCH64
#else
	ldr	x4, [x11]
	ldr	x5, =ES_TO_AARCH32
#endif
	bl	secondary_switch_to_el2

1:
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
	adr	x4, secondary_switch_to_el1
#else
	ldr	x4, [x11]
#endif
	ldr	x5, =ES_TO_AARCH64
	bl	secondary_switch_to_el2

ENDPROC(secondary_boot_func)

ENTRY(secondary_switch_to_el2)
	switch_el x6, 1f, 0f, 0f
0:	ret
1:	armv8_switch_to_el2_m x4, x5, x6
ENDPROC(secondary_switch_to_el2)

ENTRY(secondary_switch_to_el1)
	mrs	x0, mpidr_el1
	ubfm	x1, x0, #8, #15
	ubfm	x2, x0, #0, #1
	orr	x10, x2, x1, lsl #2	/* x10 has LPID */

	lsl	x1, x10, #6
	ldr	x0, =__spin_table
	/* physical address of this cpus spin table element */
	add	x11, x1, x0

	ldr	x4, [x11]

	ldr	x5, [x11, #24]
	ldr	x6, =IH_ARCH_DEFAULT
	cmp	x6, x5
	b.eq	2f

	ldr	x5, =ES_TO_AARCH32
	bl	switch_to_el1

2:	ldr	x5, =ES_TO_AARCH64

switch_to_el1:
	switch_el x6, 0f, 1f, 0f
0:	ret
1:	armv8_switch_to_el1_m x4, x5, x6
ENDPROC(secondary_switch_to_el1)

	/* Ensure that the literals used by the secondary boot code are
	 * assembled within it (this is required so that we can protect
	 * this area with a single memreserve region
	 */
	.ltorg

	/* 64 bit alignment for elements accessed as data */
	.align 4
	.global __real_cntfrq
__real_cntfrq:
	.quad COUNTER_FREQUENCY
	.globl __secondary_boot_code_size
	.type __secondary_boot_code_size, %object
	/* Secondary Boot Code ends here */
__secondary_boot_code_size:
	.quad .-secondary_boot_code
#endif
Commit	Line	Data
2f78eae5	1	/*
9f3183d2	2	* (C) Copyright 2014-2015 Freescale Semiconductor
2f78eae5 YS	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*
	6	* Extracted from armv8/start.S
	7	*/
	8
	9	#include <config.h>
	10	#include <linux/linkage.h>
40f8dec5	11	#include <asm/gic.h>
2f78eae5	12	#include <asm/macro.h>
fa18ed76	13	#include <asm/arch-fsl-layerscape/soc.h>
9f3183d2 MH	14	#ifdef CONFIG_MP
	15	#include <asm/arch/mp.h>
	16	#endif
f6a70b3a PJ	17	#ifdef CONFIG_FSL_LSCH3
	18	#include <asm/arch-fsl-layerscape/immap_lsch3.h>
	19	#endif
ec6617c3	20	#include <asm/u-boot.h>
2f78eae5	21
fa18ed76 WS	22	/* Get GIC offset
	23	* For LS1043a rev1.0, GIC base address align with 4k.
	24	* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
	25	* is set, GIC base address align with 4K, or else align
	26	* with 64k.
	27	* output:
	28	* x0: the base address of GICD
	29	* x1: the base address of GICC
	30	*/
	31	ENTRY(get_gic_offset)
	32	ldr x0, =GICD_BASE
	33	#ifdef CONFIG_GICV2
	34	ldr x1, =GICC_BASE
	35	#endif
	36	#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
	37	ldr x2, =DCFG_CCSR_SVR
	38	ldr w2, [x2]
	39	rev w2, w2
	40	mov w3, w2
	41	ands w3, w3, #SVR_WO_E << 8
	42	mov w4, #SVR_LS1043A << 8
	43	cmp w3, w4
	44	b.ne 1f
	45	ands w2, w2, #0xff
	46	cmp w2, #REV1_0
	47	b.eq 1f
	48	ldr x2, =SCFG_GIC400_ALIGN
	49	ldr w2, [x2]
	50	rev w2, w2
	51	tbnz w2, #GIC_ADDR_BIT, 1f
	52	ldr x0, =GICD_BASE_64K
	53	#ifdef CONFIG_GICV2
	54	ldr x1, =GICC_BASE_64K
	55	#endif
	56	1:
	57	#endif
	58	ret
	59	ENDPROC(get_gic_offset)
	60
	61	ENTRY(smp_kick_all_cpus)
	62	/* Kick secondary cpus up by SGI 0 interrupt */
	63	#if defined(CONFIG_GICV2) \|\| defined(CONFIG_GICV3)
	64	mov x29, lr /* Save LR */
	65	bl get_gic_offset
	66	bl gic_kick_secondary_cpus
	67	mov lr, x29 /* Restore LR */
	68	#endif
	69	ret
	70	ENDPROC(smp_kick_all_cpus)
	71
	72
2f78eae5 YS	73	ENTRY(lowlevel_init)
	74	mov x29, lr /* Save LR */
	75
399e2bb6 YS	76	switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */
	77	1:
	78
9f3183d2	79	#ifdef CONFIG_FSL_LSCH3
2b690b98 PK	80
2b690b98 PK	81	/* Set Wuo bit for RN-I 20 */
4a3ab193	82	#ifdef CONFIG_ARCH_LS2080A
2b690b98 PK	83	ldr x0, =CCI_AUX_CONTROL_BASE(20)
	84	ldr x1, =0x00000010
	85	bl ccn504_set_aux
d037261f PJ	86
	87	/*
	88	* Set forced-order mode in RNI-6, RNI-20
	89	* This is required for performance optimization on LS2088A
	90	* LS2080A family does not support setting forced-order mode,
	91	* so skip this operation for LS2080A family
	92	*/
	93	bl get_svr
	94	lsr w0, w0, #16
	95	ldr w1, =SVR_DEV_LS2080A
	96	cmp w0, w1
	97	b.eq 1f
	98
	99	ldr x0, =CCI_AUX_CONTROL_BASE(6)
	100	ldr x1, =0x00000020
	101	bl ccn504_set_aux
	102	ldr x0, =CCI_AUX_CONTROL_BASE(20)
	103	ldr x1, =0x00000020
	104	bl ccn504_set_aux
	105	1:
2b690b98 PK	106	#endif
2b690b98 PK	107
07c66000	108	/* Add fully-coherent masters to DVM domain */
3ffa95c2 BS	109	ldr x0, =CCI_MN_BASE
	110	ldr x1, =CCI_MN_RNF_NODEID_LIST
	111	ldr x2, =CCI_MN_DVM_DOMAIN_CTL_SET
	112	bl ccn504_add_masters_to_dvm
	113
	114	/* Set all RN-I ports to QoS of 15 */
	115	ldr x0, =CCI_S0_QOS_CONTROL_BASE(0)
	116	ldr x1, =0x00FF000C
	117	bl ccn504_set_qos
	118	ldr x0, =CCI_S1_QOS_CONTROL_BASE(0)
	119	ldr x1, =0x00FF000C
	120	bl ccn504_set_qos
	121	ldr x0, =CCI_S2_QOS_CONTROL_BASE(0)
	122	ldr x1, =0x00FF000C
	123	bl ccn504_set_qos
	124
	125	ldr x0, =CCI_S0_QOS_CONTROL_BASE(2)
	126	ldr x1, =0x00FF000C
	127	bl ccn504_set_qos
	128	ldr x0, =CCI_S1_QOS_CONTROL_BASE(2)
	129	ldr x1, =0x00FF000C
	130	bl ccn504_set_qos
	131	ldr x0, =CCI_S2_QOS_CONTROL_BASE(2)
	132	ldr x1, =0x00FF000C
	133	bl ccn504_set_qos
	134
	135	ldr x0, =CCI_S0_QOS_CONTROL_BASE(6)
	136	ldr x1, =0x00FF000C
	137	bl ccn504_set_qos
	138	ldr x0, =CCI_S1_QOS_CONTROL_BASE(6)
	139	ldr x1, =0x00FF000C
	140	bl ccn504_set_qos
	141	ldr x0, =CCI_S2_QOS_CONTROL_BASE(6)
	142	ldr x1, =0x00FF000C
	143	bl ccn504_set_qos
	144
	145	ldr x0, =CCI_S0_QOS_CONTROL_BASE(12)
	146	ldr x1, =0x00FF000C
	147	bl ccn504_set_qos
	148	ldr x0, =CCI_S1_QOS_CONTROL_BASE(12)
	149	ldr x1, =0x00FF000C
	150	bl ccn504_set_qos
	151	ldr x0, =CCI_S2_QOS_CONTROL_BASE(12)
	152	ldr x1, =0x00FF000C
	153	bl ccn504_set_qos
	154
	155	ldr x0, =CCI_S0_QOS_CONTROL_BASE(16)
	156	ldr x1, =0x00FF000C
	157	bl ccn504_set_qos
	158	ldr x0, =CCI_S1_QOS_CONTROL_BASE(16)
	159	ldr x1, =0x00FF000C
	160	bl ccn504_set_qos
	161	ldr x0, =CCI_S2_QOS_CONTROL_BASE(16)
	162	ldr x1, =0x00FF000C
	163	bl ccn504_set_qos
	164
	165	ldr x0, =CCI_S0_QOS_CONTROL_BASE(20)
	166	ldr x1, =0x00FF000C
	167	bl ccn504_set_qos
	168	ldr x0, =CCI_S1_QOS_CONTROL_BASE(20)
	169	ldr x1, =0x00FF000C
	170	bl ccn504_set_qos
	171	ldr x0, =CCI_S2_QOS_CONTROL_BASE(20)
	172	ldr x1, =0x00FF000C
173	bl ccn504_set_qos
9f3183d2	174	#endif
07c66000	175
1e49a231	176	#ifdef SMMU_BASE
2f78eae5 YS	177	/* Set the SMMU page size in the sACR register */
	178	ldr x1, =SMMU_BASE
	179	ldr w0, [x1, #0x10]
	180	orr w0, w0, #1 << 16 /* set sACR.pagesize to indicate 64K page */
	181	str w0, [x1, #0x10]
1e49a231	182	#endif
2f78eae5 YS	183
	184	/* Initialize GIC Secure Bank Status */
	185	#if defined(CONFIG_GICV2) \|\| defined(CONFIG_GICV3)
	186	branch_if_slave x0, 1f
fa18ed76	187	bl get_gic_offset
2f78eae5 YS	188	bl gic_init_secure
	189	1:
	190	#ifdef CONFIG_GICV3
	191	ldr x0, =GICR_BASE
	192	bl gic_init_secure_percpu
	193	#elif defined(CONFIG_GICV2)
fa18ed76	194	bl get_gic_offset
2f78eae5 YS	195	bl gic_init_secure_percpu
	196	#endif
	197	#endif
	198
399e2bb6	199	100:
40f8dec5	200	branch_if_master x0, x1, 2f
2f78eae5	201
9f3183d2	202	#if defined(CONFIG_MP) && defined(CONFIG_ARMV8_MULTIENTRY)
40f8dec5 YS	203	ldr x0, =secondary_boot_func
40f8dec5 YS	204	blr x0
9f3183d2	205	#endif
9c66ce66	206
9f3183d2	207	2:
399e2bb6 YS	208	switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */
399e2bb6 YS	209	1:
9c66ce66 BS	210	#ifdef CONFIG_FSL_TZPC_BP147
	211	/* Set Non Secure access for all devices protected via TZPC */
	212	ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */
	213	orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */
	214	str w0, [x1]
	215
	216	isb
	217	dsb sy
	218	#endif
	219
	220	#ifdef CONFIG_FSL_TZASC_400
d5df606d PJ	221	/*
	222	* LS2080 and its personalities does not support TZASC
	223	* So skip TZASC related operations
	224	*/
	225	bl get_svr
	226	lsr w0, w0, #16
	227	ldr w1, =SVR_DEV_LS2080A
	228	cmp w0, w1
	229	b.eq 1f
	230
9c66ce66 BS	231	/* Set TZASC so that:
	232	* a. We use only Region0 whose global secure write/read is EN
	233	* b. We use only Region0 whose NSAID write/read is EN
	234	*
	235	* NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
	236	* placeholders.
	237	*/
85a9a14e	238	#ifdef CONFIG_FSL_TZASC_1
9c66ce66	239	ldr x1, =TZASC_GATE_KEEPER(0)
7cfbb4ab PJ	240	ldr w0, [x1] /* Filter 0 Gate Keeper Register */
	241	orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
	242	str w0, [x1]
9c66ce66	243
9c66ce66	244	ldr x1, =TZASC_REGION_ATTRIBUTES_0(0)
7cfbb4ab PJ	245	ldr w0, [x1] /* Region-0 Attributes Register */
	246	orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
	247	orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
	248	str w0, [x1]
9c66ce66	249
85a9a14e A	250	ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
	251	ldr w0, [x1] /* Region-0 Access Register */
	252	mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
	253	str w0, [x1]
	254	#endif
	255	#ifdef CONFIG_FSL_TZASC_2
	256	ldr x1, =TZASC_GATE_KEEPER(1)
	257	ldr w0, [x1] /* Filter 0 Gate Keeper Register */
	258	orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
	259	str w0, [x1]
	260
9c66ce66	261	ldr x1, =TZASC_REGION_ATTRIBUTES_0(1)
7cfbb4ab PJ	262	ldr w0, [x1] /* Region-1 Attributes Register */
	263	orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
	264	orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
	265	str w0, [x1]
9c66ce66	266
9c66ce66 BS	267	ldr x1, =TZASC_REGION_ID_ACCESS_0(1)
	268	ldr w0, [x1] /* Region-1 Attributes Register */
	269	mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
	270	str w0, [x1]
85a9a14e	271	#endif
9c66ce66 BS	272	isb
	273	dsb sy
	274	#endif
399e2bb6	275	100:
d5df606d	276	1:
da28e58a	277	#ifdef CONFIG_ARCH_LS1046A
399e2bb6 YS	278	switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */
399e2bb6 YS	279	1:
13f79880 MH	280	/* Initialize the L2 RAM latency */
	281	mrs x1, S3_1_c11_c0_2
	282	mov x0, #0x1C7
	283	/* Clear L2 Tag RAM latency and L2 Data RAM latency */
	284	bic x1, x1, x0
	285	/* Set L2 data ram latency bits [2:0] */
	286	orr x1, x1, #0x2
	287	/* set L2 tag ram latency bits [8:6] */
	288	orr x1, x1, #0x80
	289	msr S3_1_c11_c0_2, x1
	290	isb
399e2bb6	291	100:
13f79880 MH	292	#endif
13f79880 MH	293
3b6bf811 HZ	294	#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
	295	bl fsl_ocram_init
	296	#endif
	297
40f8dec5 YS	298	mov lr, x29 /* Restore LR */
	299	ret
	300	ENDPROC(lowlevel_init)
	301
3b6bf811 HZ	302	#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
	303	ENTRY(fsl_ocram_init)
	304	mov x28, lr /* Save LR */
	305	bl fsl_clear_ocram
	306	bl fsl_ocram_clear_ecc_err
	307	mov lr, x28 /* Restore LR */
	308	ret
	309	ENDPROC(fsl_ocram_init)
	310
	311	ENTRY(fsl_clear_ocram)
	312	/* Clear OCRAM */
	313	ldr x0, =CONFIG_SYS_FSL_OCRAM_BASE
	314	ldr x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE)
	315	mov x2, #0
	316	clear_loop:
	317	str x2, [x0]
	318	add x0, x0, #8
	319	cmp x0, x1
	320	b.lo clear_loop
	321	ret
	322	ENDPROC(fsl_clear_ocram)
	323
	324	ENTRY(fsl_ocram_clear_ecc_err)
	325	/* OCRAM1/2 ECC status bit */
	326	mov w1, #0x60
	327	ldr x0, =DCSR_DCFG_SBEESR2
	328	str w1, [x0]
	329	ldr x0, =DCSR_DCFG_MBEESR2
	330	str w1, [x0]
	331	ret
	332	ENDPROC(fsl_ocram_init)
	333	#endif
	334
b7f2bbff	335	#ifdef CONFIG_FSL_LSCH3
f6a70b3a PJ	336	.globl get_svr
	337	get_svr:
	338	ldr x1, =FSL_LSCH3_SVR
	339	ldr w0, [x1]
	340	ret
	341
dcd468b8 YS	342	hnf_pstate_poll:
	343	/* x0 has the desired status, return 0 for success, 1 for timeout
	344	* clobber x1, x2, x3, x4, x6, x7
	345	*/
	346	mov x1, x0
	347	mov x7, #0 /* flag for timeout */
	348	mrs x3, cntpct_el0 /* read timer */
	349	add x3, x3, #1200 /* timeout after 100 microseconds */
	350	mov x0, #0x18
	351	movk x0, #0x420, lsl #16 /* HNF0_PSTATE_STATUS */
	352	mov w6, #8 /* HN-F node count */
	353	1:
	354	ldr x2, [x0]
	355	cmp x2, x1 /* check status */
	356	b.eq 2f
	357	mrs x4, cntpct_el0
	358	cmp x4, x3
	359	b.ls 1b
	360	mov x7, #1 /* timeout */
	361	b 3f
	362	2:
	363	add x0, x0, #0x10000 /* move to next node */
	364	subs w6, w6, #1
	365	cbnz w6, 1b
	366	3:
	367	mov x0, x7
	368	ret
	369
	370	hnf_set_pstate:
	371	/* x0 has the desired state, clobber x1, x2, x6 */
	372	mov x1, x0
	373	/* power state to SFONLY */
	374	mov w6, #8 /* HN-F node count */
	375	mov x0, #0x10
	376	movk x0, #0x420, lsl #16 /* HNF0_PSTATE_REQ */
	377	1: /* set pstate to sfonly */
	378	ldr x2, [x0]
	379	and x2, x2, #0xfffffffffffffffc /* & HNFPSTAT_MASK */
	380	orr x2, x2, x1
	381	str x2, [x0]
	382	add x0, x0, #0x10000 /* move to next node */
	383	subs w6, w6, #1
	384	cbnz w6, 1b
	385
	386	ret
	387
1ab557a0	388	ENTRY(__asm_flush_l3_dcache)
dcd468b8 YS	389	/*
	390	* Return status in x0
	391	* success 0
399e2bb6	392	* timeout 1 for setting SFONLY, 2 for FAM, 3 for both
dcd468b8 YS	393	*/
	394	mov x29, lr
	395	mov x8, #0
	396
399e2bb6 YS	397	switch_el x0, 1f, 100f, 100f /* skip if not in EL3 */
	398
	399	1:
dcd468b8 YS	400	dsb sy
	401	mov x0, #0x1 /* HNFPSTAT_SFONLY */
	402	bl hnf_set_pstate
	403
	404	mov x0, #0x4 /* SFONLY status */
	405	bl hnf_pstate_poll
	406	cbz x0, 1f
	407	mov x8, #1 /* timeout */
	408	1:
	409	dsb sy
	410	mov x0, #0x3 /* HNFPSTAT_FAM */
	411	bl hnf_set_pstate
	412
	413	mov x0, #0xc /* FAM status */
	414	bl hnf_pstate_poll
	415	cbz x0, 1f
	416	add x8, x8, #0x2
399e2bb6	417	100:
dcd468b8 YS	418	1:
	419	mov x0, x8
	420	mov lr, x29
	421	ret
1ab557a0	422	ENDPROC(__asm_flush_l3_dcache)
b7f2bbff	423	#endif
dcd468b8	424
9f3183d2	425	#ifdef CONFIG_MP
40f8dec5 YS	426	/* Keep literals not used by the secondary boot code outside it */
	427	.ltorg
	428
	429	/* Using 64 bit alignment since the spin table is accessed as data */
	430	.align 4
	431	.global secondary_boot_code
	432	/* Secondary Boot Code starts here */
	433	secondary_boot_code:
	434	.global __spin_table
	435	__spin_table:
	436	.space CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE
	437
	438	.align 2
	439	ENTRY(secondary_boot_func)
2f78eae5	440	/*
40f8dec5 YS	441	* MPIDR_EL1 Fields:
	442	* MPIDR[1:0] = AFF0_CPUID <- Core ID (0,1)
	443	* MPIDR[7:2] = AFF0_RES
	444	* MPIDR[15:8] = AFF1_CLUSTERID <- Cluster ID (0,1,2,3)
	445	* MPIDR[23:16] = AFF2_CLUSTERID
	446	* MPIDR[24] = MT
	447	* MPIDR[29:25] = RES0
	448	* MPIDR[30] = U
	449	* MPIDR[31] = ME
	450	* MPIDR[39:32] = AFF3
	451	*
	452	* Linear Processor ID (LPID) calculation from MPIDR_EL1:
	453	* (We only use AFF0_CPUID and AFF1_CLUSTERID for now
	454	* until AFF2_CLUSTERID and AFF3 have non-zero values)
	455	*
	456	* LPID = MPIDR[15:8] \| MPIDR[1:0]
2f78eae5	457	*/
40f8dec5 YS	458	mrs x0, mpidr_el1
	459	ubfm x1, x0, #8, #15
	460	ubfm x2, x0, #0, #1
	461	orr x10, x2, x1, lsl #2 /* x10 has LPID */
	462	ubfm x9, x0, #0, #15 /* x9 contains MPIDR[15:0] */
2f78eae5	463	/*
40f8dec5 YS	464	* offset of the spin table element for this core from start of spin
40f8dec5 YS	465	* table (each elem is padded to 64 bytes)
2f78eae5	466	*/
40f8dec5 YS	467	lsl x1, x10, #6
	468	ldr x0, =__spin_table
	469	/* physical address of this cpus spin table element */
	470	add x11, x1, x0
	471
207774b2 YS	472	ldr x0, =__real_cntfrq
	473	ldr x0, [x0]
	474	msr cntfrq_el0, x0 /* set with real frequency */
40f8dec5 YS	475	str x9, [x11, #16] /* LPID */
	476	mov x4, #1
	477	str x4, [x11, #8] /* STATUS */
	478	dsb sy
	479	#if defined(CONFIG_GICV3)
	480	gic_wait_for_interrupt_m x0
	481	#elif defined(CONFIG_GICV2)
fa18ed76 WS	482	bl get_gic_offset
fa18ed76 WS	483	mov x0, x1
40f8dec5 YS	484	gic_wait_for_interrupt_m x0, w1
	485	#endif
	486
40f8dec5 YS	487	slave_cpu:
	488	wfe
	489	ldr x0, [x11]
	490	cbz x0, slave_cpu
	491	#ifndef CONFIG_ARMV8_SWITCH_TO_EL1
	492	mrs x1, sctlr_el2
	493	#else
	494	mrs x1, sctlr_el1
	495	#endif
	496	tbz x1, #25, cpu_is_le
	497	rev x0, x0 /* BE to LE conversion */
	498	cpu_is_le:
ec6617c3 AW	499	ldr x5, [x11, #24]
	500	ldr x6, =IH_ARCH_DEFAULT
	501	cmp x6, x5
	502	b.eq 1f
	503
	504	#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
7c5e1feb AW	505	adr x4, secondary_switch_to_el1
7c5e1feb AW	506	ldr x5, =ES_TO_AARCH64
ec6617c3	507	#else
7c5e1feb AW	508	ldr x4, [x11]
7c5e1feb AW	509	ldr x5, =ES_TO_AARCH32
ec6617c3 AW	510	#endif
	511	bl secondary_switch_to_el2
	512
	513	1:
	514	#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
7c5e1feb	515	adr x4, secondary_switch_to_el1
ec6617c3	516	#else
7c5e1feb	517	ldr x4, [x11]
ec6617c3	518	#endif
7c5e1feb	519	ldr x5, =ES_TO_AARCH64
ec6617c3 AW	520	bl secondary_switch_to_el2
ec6617c3 AW	521
40f8dec5 YS	522	ENDPROC(secondary_boot_func)
	523
	524	ENTRY(secondary_switch_to_el2)
7c5e1feb	525	switch_el x6, 1f, 0f, 0f
40f8dec5	526	0: ret
7c5e1feb	527	1: armv8_switch_to_el2_m x4, x5, x6
40f8dec5 YS	528	ENDPROC(secondary_switch_to_el2)
	529
	530	ENTRY(secondary_switch_to_el1)
ec6617c3 AW	531	mrs x0, mpidr_el1
	532	ubfm x1, x0, #8, #15
	533	ubfm x2, x0, #0, #1
	534	orr x10, x2, x1, lsl #2 /* x10 has LPID */
	535
	536	lsl x1, x10, #6
	537	ldr x0, =__spin_table
	538	/* physical address of this cpus spin table element */
	539	add x11, x1, x0
	540
7c5e1feb	541	ldr x4, [x11]
ec6617c3 AW	542
	543	ldr x5, [x11, #24]
	544	ldr x6, =IH_ARCH_DEFAULT
	545	cmp x6, x5
	546	b.eq 2f
	547
7c5e1feb	548	ldr x5, =ES_TO_AARCH32
ec6617c3 AW	549	bl switch_to_el1
ec6617c3 AW	550
7c5e1feb	551	2: ldr x5, =ES_TO_AARCH64
ec6617c3 AW	552
ec6617c3 AW	553	switch_to_el1:
7c5e1feb	554	switch_el x6, 0f, 1f, 0f
40f8dec5	555	0: ret
7c5e1feb	556	1: armv8_switch_to_el1_m x4, x5, x6
40f8dec5 YS	557	ENDPROC(secondary_switch_to_el1)
	558
	559	/* Ensure that the literals used by the secondary boot code are
	560	* assembled within it (this is required so that we can protect
	561	* this area with a single memreserve region
	562	*/
	563	.ltorg
	564
	565	/* 64 bit alignment for elements accessed as data */
	566	.align 4
207774b2 YS	567	.global __real_cntfrq
	568	__real_cntfrq:
	569	.quad COUNTER_FREQUENCY
40f8dec5 YS	570	.globl __secondary_boot_code_size
	571	.type __secondary_boot_code_size, %object
	572	/* Secondary Boot Code ends here */
	573	__secondary_boot_code_size:
	574	.quad .-secondary_boot_code
9f3183d2	575	#endif