]>
Commit | Line | Data |
---|---|---|
71423435 HS |
1 | /* |
2 | * Common support for Siemens Draco SOM (AM335x based) | |
3 | * | |
4 | * Copyright (C) 2013,2014 - Stefan Roese <sr@denx.de> | |
5 | * | |
6 | * This file is licensed under the terms of the GNU General Public License | |
7 | * version 2. This program is licensed "as is" without any warranty of any | |
8 | * kind, whether express or implied. | |
9 | */ | |
10 | ||
11 | / { | |
12 | chosen { | |
13 | stdout-path = &uart0; | |
14 | tick-timer = &timer2; | |
15 | }; | |
16 | ||
17 | memory { | |
18 | device_type = "memory"; | |
19 | reg = <0x80000000 0x08000000>; /* 128 MB */ | |
20 | }; | |
21 | ||
22 | ocp { | |
23 | uart0: serial@44e09000 { | |
24 | pinctrl-names = "default"; | |
25 | pinctrl-0 = <&uart0_pins>; | |
26 | status = "okay"; | |
27 | }; | |
28 | ||
29 | i2c0: i2c@44e0b000 { | |
30 | pinctrl-names = "default"; | |
31 | pinctrl-0 = <&i2c0_pins>; | |
32 | ||
33 | status = "okay"; | |
34 | clock-frequency = <400000>; | |
35 | ||
36 | eeprom: eeprom@50 { | |
37 | compatible = "atmel,24c128"; | |
38 | reg = <0x50>; | |
39 | pagesize = <64>; | |
40 | }; | |
41 | }; | |
42 | ||
43 | musb: usb@47400000 { | |
44 | status = "okay"; | |
45 | ||
46 | control@44e10620 { | |
47 | status = "okay"; | |
48 | }; | |
49 | ||
50 | usb-phy@47401300 { | |
51 | status = "okay"; | |
52 | }; | |
53 | ||
54 | usb-phy@47401b00 { | |
55 | status = "okay"; | |
56 | }; | |
57 | ||
58 | usb@47401000 { | |
59 | status = "okay"; | |
60 | }; | |
61 | ||
62 | usb@47401800 { | |
63 | status = "okay"; | |
64 | dr_mode = "host"; | |
65 | }; | |
66 | ||
67 | dma-controller@47402000 { | |
68 | status = "okay"; | |
69 | }; | |
70 | }; | |
71 | }; | |
72 | }; | |
73 | ||
74 | &am33xx_pinmux { | |
75 | i2c0_pins: pinmux_i2c0_pins { | |
76 | pinctrl-single,pins = < | |
77 | 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ | |
78 | 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ | |
79 | >; | |
80 | }; | |
81 | ||
82 | uart0_pins: pinmux_uart0_pins { | |
83 | pinctrl-single,pins = < | |
84 | 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ | |
85 | 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ | |
86 | >; | |
87 | }; | |
88 | ||
89 | nandflash_pins: nandflash_pins { | |
90 | pinctrl-single,pins = < | |
91 | 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ | |
92 | 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ | |
93 | 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ | |
94 | 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ | |
95 | 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ | |
96 | 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ | |
97 | 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ | |
98 | 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ | |
99 | 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ | |
100 | 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ | |
101 | 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ | |
102 | 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ | |
103 | 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ | |
104 | 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ | |
105 | 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ | |
106 | >; | |
107 | }; | |
108 | }; | |
109 | ||
110 | ||
111 | &timer3 { | |
112 | status = "disabled"; | |
113 | }; | |
114 | ||
115 | &uart4 { | |
116 | status = "disabled"; | |
117 | }; | |
118 | ||
119 | &elm { | |
120 | status = "okay"; | |
121 | }; | |
122 | ||
123 | &gpmc { | |
124 | status = "okay"; | |
125 | pinctrl-names = "default"; | |
126 | pinctrl-0 = <&nandflash_pins>; | |
127 | ||
128 | ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ | |
129 | ||
130 | nand@0,0 { | |
131 | reg = <0 0 0>; /* CS0, offset 0 */ | |
132 | nand-bus-width = <8>; | |
133 | ti,nand-ecc-opt = "bch8"; | |
134 | gpmc,device-nand = "true"; | |
135 | gpmc,device-width = <1>; | |
136 | gpmc,sync-clk-ps = <0>; | |
137 | gpmc,cs-on-ns = <0>; | |
138 | gpmc,cs-rd-off-ns = <44>; | |
139 | gpmc,cs-wr-off-ns = <44>; | |
140 | gpmc,adv-on-ns = <6>; | |
141 | gpmc,adv-rd-off-ns = <34>; | |
142 | gpmc,adv-wr-off-ns = <44>; | |
143 | gpmc,we-on-ns = <0>; | |
144 | gpmc,we-off-ns = <40>; | |
145 | gpmc,oe-on-ns = <0>; | |
146 | gpmc,oe-off-ns = <54>; | |
147 | gpmc,access-ns = <64>; | |
148 | gpmc,rd-cycle-ns = <82>; | |
149 | gpmc,wr-cycle-ns = <82>; | |
150 | gpmc,wait-on-read = "true"; | |
151 | gpmc,wait-on-write = "true"; | |
152 | gpmc,bus-turnaround-ns = <0>; | |
153 | gpmc,cycle2cycle-delay-ns = <0>; | |
154 | gpmc,clk-activation-ns = <0>; | |
155 | gpmc,wait-monitoring-ns = <0>; | |
156 | gpmc,wr-access-ns = <40>; | |
157 | gpmc,wr-data-mux-bus-ns = <0>; | |
158 | ||
159 | #address-cells = <1>; | |
160 | #size-cells = <1>; | |
161 | elm_id = <&elm>; | |
162 | }; | |
163 | }; | |
164 | ||
165 | /* disable the RTC node as its not accessible on the draco/dxr2 board */ | |
166 | &rtc { | |
167 | status = "disabled"; | |
168 | ti,hwmods = "disabled"; | |
169 | }; |