[people/ms/u-boot.git] / arch / arm / dts / at91-sama5d2_xplained.dts

/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"

/ {
	model = "Atmel SAMA5D2 Xplained";
	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";

	chosen {
		u-boot,dm-pre-reloc;
		stdout-path = &uart1;
	};

	ahb {
		usb1: ohci@00400000 {
			num-ports = <3>;
			atmel,vbus-gpio = <&pioA 42 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usb_default>;
			status = "okay";
		};

		usb2: ehci@00500000 {
			status = "okay";
		};

		sdmmc0: sdio-host@a0000000 {
			bus-width = <8>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
			status = "okay";
			u-boot,dm-pre-reloc;
		};

		sdmmc1: sdio-host@b0000000 {
			bus-width = <4>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
			status = "okay"; /* conflict with qspi0 */
			u-boot,dm-pre-reloc;
		};

		apb {
			qspi0: spi@f0020000 {
				status = "okay";

				flash@0 {
					compatible = "atmel,sama5d2-qspi-flash";
					reg = <0>;
					#address-cells = <1>;
					#size-cells = <1>;
					pinctrl-names = "default";
					pinctrl-0 = <&pinctrl_qspi0_default>;
					spi-max-frequency = <83000000>;

					partition@00000000 {
						label = "boot";
						reg = <0x00000000 0x00c00000>;
					};

					partition@00c00000 {
						label = "rootfs";
						reg = <0x00c00000 0x00000000>;
					};
				};
			};

			spi0: spi@f8000000 {
				cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_spi0_default>;
				status = "okay";
				u-boot,dm-pre-reloc;

				spi_flash@0 {
					compatible = "spi-flash";
					reg = <0>;
					spi-max-frequency = <50000000>;
					u-boot,dm-pre-reloc;
				};
			};

			macb0: ethernet@f8008000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
				phy-mode = "rmii";
				status = "okay";

				ethernet-phy@1 {
					reg = <0x1>;
				};
			};

			uart1: serial@f8020000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_uart1_default>;
				status = "okay";
				u-boot,dm-pre-reloc;
			};

			i2c1: i2c@fc028000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_i2c1_default>;
				status = "okay";

				i2c_eeprom: i2c_eeprom@5c {
					compatible = "atmel,24mac402";
					reg = <0x5c>;
				};
			};

			pioA: gpio@fc038000 {
				pinctrl {
					pinctrl_i2c1_default: i2c1_default {
						pinmux = <PIN_PD4__TWD1>,
							 <PIN_PD5__TWCK1>;
						bias-disable;
					};

					pinctrl_macb0_phy_irq: macb0_phy_irq {
						pinmux = <PIN_PC9__GPIO>;
						bias-disable;
					};

					pinctrl_macb0_rmii: macb0_rmii {
						pinmux = <PIN_PB14__GTXCK>,
							 <PIN_PB15__GTXEN>,
							 <PIN_PB16__GRXDV>,
							 <PIN_PB17__GRXER>,
							 <PIN_PB18__GRX0>,
							 <PIN_PB19__GRX1>,
							 <PIN_PB20__GTX0>,
							 <PIN_PB21__GTX1>,
							 <PIN_PB22__GMDC>,
							 <PIN_PB23__GMDIO>;
						bias-disable;
					};

					pinctrl_qspi0_default: qspi0_default {
						pinmux = <PIN_PA22__QSPI0_SCK>,
							 <PIN_PA23__QSPI0_CS>,
							 <PIN_PA24__QSPI0_IO0>,
							 <PIN_PA25__QSPI0_IO1>,
							 <PIN_PA26__QSPI0_IO2>,
							 <PIN_PA27__QSPI0_IO3>;
						bias-disable;
					};

					pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
						pinmux = <PIN_PA1__SDMMC0_CMD>,
							 <PIN_PA2__SDMMC0_DAT0>,
							 <PIN_PA3__SDMMC0_DAT1>,
							 <PIN_PA4__SDMMC0_DAT2>,
							 <PIN_PA5__SDMMC0_DAT3>,
							 <PIN_PA6__SDMMC0_DAT4>,
							 <PIN_PA7__SDMMC0_DAT5>,
							 <PIN_PA8__SDMMC0_DAT6>,
							 <PIN_PA9__SDMMC0_DAT7>;
						bias-pull-up;
						u-boot,dm-pre-reloc;
					};

					pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
						pinmux = <PIN_PA0__SDMMC0_CK>,
							 <PIN_PA10__SDMMC0_RSTN>,
							 <PIN_PA11__SDMMC0_VDDSEL>,
							 <PIN_PA13__SDMMC0_CD>;
						bias-disable;
						u-boot,dm-pre-reloc;
					};

					pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
						pinmux = <PIN_PA28__SDMMC1_CMD>,
							 <PIN_PA18__SDMMC1_DAT0>,
							 <PIN_PA19__SDMMC1_DAT1>,
							 <PIN_PA20__SDMMC1_DAT2>,
							 <PIN_PA21__SDMMC1_DAT3>;
						bias-pull-up;
						u-boot,dm-pre-reloc;
					};

					pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
						pinmux = <PIN_PA22__SDMMC1_CK>,
							 <PIN_PA30__SDMMC1_CD>;
						bias-disable;
						u-boot,dm-pre-reloc;
					};

					pinctrl_spi0_default: spi0_default {
						pinmux = <PIN_PA14__SPI0_SPCK>,
							 <PIN_PA15__SPI0_MOSI>,
							 <PIN_PA16__SPI0_MISO>;
						bias-disable;
						u-boot,dm-pre-reloc;
					};

					pinctrl_uart1_default: uart1_default {
						pinmux = <PIN_PD2__URXD1>,
							 <PIN_PD3__UTXD1>;
						bias-disable;
						u-boot,dm-pre-reloc;
					};

					pinctrl_usb_default: usb_default {
						pinmux = <PIN_PB10__GPIO>;
						bias-disable;
					};

					pinctrl_usba_vbus: usba_vbus {
						pinmux = <PIN_PA31__GPIO>;
						bias-disable;
					};
				};
			};
		};
	};
};
Commit	Line	Data
2c4b2dd2 WY	1	/dts-v1/;
	2	#include "sama5d2.dtsi"
	3	#include "sama5d2-pinfunc.h"
	4
	5	/ {
	6	model = "Atmel SAMA5D2 Xplained";
	7	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
	8
	9	chosen {
4529ee3b	10	u-boot,dm-pre-reloc;
2c4b2dd2 WY	11	stdout-path = &uart1;
	12	};
	13
	14	ahb {
	15	usb1: ohci@00400000 {
	16	num-ports = <3>;
	17	atmel,vbus-gpio = <&pioA 42 0>;
	18	pinctrl-names = "default";
	19	pinctrl-0 = <&pinctrl_usb_default>;
	20	status = "okay";
	21	};
	22
	23	usb2: ehci@00500000 {
	24	status = "okay";
	25	};
	26
	27	sdmmc0: sdio-host@a0000000 {
	28	bus-width = <8>;
	29	pinctrl-names = "default";
	30	pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
	31	status = "okay";
4529ee3b	32	u-boot,dm-pre-reloc;
2c4b2dd2 WY	33	};
	34
	35	sdmmc1: sdio-host@b0000000 {
	36	bus-width = <4>;
	37	pinctrl-names = "default";
	38	pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
	39	status = "okay"; /* conflict with qspi0 */
4529ee3b	40	u-boot,dm-pre-reloc;
2c4b2dd2 WY	41	};
	42
	43	apb {
	44	qspi0: spi@f0020000 {
	45	status = "okay";
	46
	47	flash@0 {
	48	compatible = "atmel,sama5d2-qspi-flash";
	49	reg = <0>;
	50	#address-cells = <1>;
	51	#size-cells = <1>;
	52	pinctrl-names = "default";
	53	pinctrl-0 = <&pinctrl_qspi0_default>;
	54	spi-max-frequency = <83000000>;
	55
	56	partition@00000000 {
	57	label = "boot";
	58	reg = <0x00000000 0x00c00000>;
	59	};
	60
	61	partition@00c00000 {
	62	label = "rootfs";
	63	reg = <0x00c00000 0x00000000>;
	64	};
	65	};
	66	};
	67
	68	spi0: spi@f8000000 {
	69	cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
	70	pinctrl-names = "default";
	71	pinctrl-0 = <&pinctrl_spi0_default>;
	72	status = "okay";
4529ee3b	73	u-boot,dm-pre-reloc;
2c4b2dd2 WY	74
	75	spi_flash@0 {
	76	compatible = "spi-flash";
	77	reg = <0>;
	78	spi-max-frequency = <50000000>;
4529ee3b	79	u-boot,dm-pre-reloc;
2c4b2dd2 WY	80	};
	81	};
	82
	83	macb0: ethernet@f8008000 {
	84	pinctrl-names = "default";
	85	pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
	86	phy-mode = "rmii";
	87	status = "okay";
	88
	89	ethernet-phy@1 {
	90	reg = <0x1>;
	91	};
	92	};
	93
	94	uart1: serial@f8020000 {
	95	pinctrl-names = "default";
	96	pinctrl-0 = <&pinctrl_uart1_default>;
	97	status = "okay";
4529ee3b	98	u-boot,dm-pre-reloc;
2c4b2dd2 WY	99	};
	100
	101	i2c1: i2c@fc028000 {
	102	pinctrl-names = "default";
	103	pinctrl-0 = <&pinctrl_i2c1_default>;
	104	status = "okay";
34e2819d WY	105
	106	i2c_eeprom: i2c_eeprom@5c {
	107	compatible = "atmel,24mac402";
	108	reg = <0x5c>;
	109	};
2c4b2dd2 WY	110	};
	111
	112	pioA: gpio@fc038000 {
	113	pinctrl {
	114	pinctrl_i2c1_default: i2c1_default {
	115	pinmux = <PIN_PD4__TWD1>,
	116	<PIN_PD5__TWCK1>;
	117	bias-disable;
	118	};
	119
	120	pinctrl_macb0_phy_irq: macb0_phy_irq {
	121	pinmux = <PIN_PC9__GPIO>;
	122	bias-disable;
	123	};
	124
	125	pinctrl_macb0_rmii: macb0_rmii {
	126	pinmux = <PIN_PB14__GTXCK>,
	127	<PIN_PB15__GTXEN>,
	128	<PIN_PB16__GRXDV>,
	129	<PIN_PB17__GRXER>,
	130	<PIN_PB18__GRX0>,
	131	<PIN_PB19__GRX1>,
	132	<PIN_PB20__GTX0>,
	133	<PIN_PB21__GTX1>,
	134	<PIN_PB22__GMDC>,
	135	<PIN_PB23__GMDIO>;
	136	bias-disable;
	137	};
	138
	139	pinctrl_qspi0_default: qspi0_default {
	140	pinmux = <PIN_PA22__QSPI0_SCK>,
	141	<PIN_PA23__QSPI0_CS>,
	142	<PIN_PA24__QSPI0_IO0>,
	143	<PIN_PA25__QSPI0_IO1>,
	144	<PIN_PA26__QSPI0_IO2>,
	145	<PIN_PA27__QSPI0_IO3>;
	146	bias-disable;
	147	};
	148
	149	pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
	150	pinmux = <PIN_PA1__SDMMC0_CMD>,
	151	<PIN_PA2__SDMMC0_DAT0>,
	152	<PIN_PA3__SDMMC0_DAT1>,
	153	<PIN_PA4__SDMMC0_DAT2>,
	154	<PIN_PA5__SDMMC0_DAT3>,
	155	<PIN_PA6__SDMMC0_DAT4>,
	156	<PIN_PA7__SDMMC0_DAT5>,
	157	<PIN_PA8__SDMMC0_DAT6>,
	158	<PIN_PA9__SDMMC0_DAT7>;
	159	bias-pull-up;
4529ee3b	160	u-boot,dm-pre-reloc;
2c4b2dd2 WY	161	};
	162
	163	pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
	164	pinmux = <PIN_PA0__SDMMC0_CK>,
	165	<PIN_PA10__SDMMC0_RSTN>,
	166	<PIN_PA11__SDMMC0_VDDSEL>,
	167	<PIN_PA13__SDMMC0_CD>;
	168	bias-disable;
4529ee3b	169	u-boot,dm-pre-reloc;
2c4b2dd2 WY	170	};
	171
	172	pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
	173	pinmux = <PIN_PA28__SDMMC1_CMD>,
	174	<PIN_PA18__SDMMC1_DAT0>,
	175	<PIN_PA19__SDMMC1_DAT1>,
	176	<PIN_PA20__SDMMC1_DAT2>,
	177	<PIN_PA21__SDMMC1_DAT3>;
	178	bias-pull-up;
4529ee3b	179	u-boot,dm-pre-reloc;
2c4b2dd2 WY	180	};
	181
	182	pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
	183	pinmux = <PIN_PA22__SDMMC1_CK>,
	184	<PIN_PA30__SDMMC1_CD>;
	185	bias-disable;
4529ee3b	186	u-boot,dm-pre-reloc;
2c4b2dd2 WY	187	};
	188
	189	pinctrl_spi0_default: spi0_default {
	190	pinmux = <PIN_PA14__SPI0_SPCK>,
	191	<PIN_PA15__SPI0_MOSI>,
	192	<PIN_PA16__SPI0_MISO>;
	193	bias-disable;
4529ee3b	194	u-boot,dm-pre-reloc;
2c4b2dd2 WY	195	};
	196
	197	pinctrl_uart1_default: uart1_default {
	198	pinmux = <PIN_PD2__URXD1>,
	199	<PIN_PD3__UTXD1>;
	200	bias-disable;
4529ee3b	201	u-boot,dm-pre-reloc;
2c4b2dd2 WY	202	};
	203
	204	pinctrl_usb_default: usb_default {
	205	pinmux = <PIN_PB10__GPIO>;
	206	bias-disable;
	207	};
	208
	209	pinctrl_usba_vbus: usba_vbus {
	210	pinmux = <PIN_PA31__GPIO>;
	211	bias-disable;
	212	};
	213	};
	214	};
	215	};
	216	};
	217	};