]>
Commit | Line | Data |
---|---|---|
eb6f87cc WY |
1 | /* |
2 | * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board | |
3 | * | |
4 | * Copyright (C) 2011 Atmel, | |
5 | * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> | |
6 | * | |
7 | * Licensed under GPLv2 or later. | |
8 | */ | |
9 | /dts-v1/; | |
10 | #include "at91sam9g45.dtsi" | |
11 | #include <dt-bindings/pwm/pwm.h> | |
12 | ||
13 | / { | |
14 | model = "Atmel AT91SAM9M10G45-EK"; | |
15 | compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; | |
16 | ||
17 | chosen { | |
18 | bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2"; | |
19 | stdout-path = "serial0:115200n8"; | |
20 | u-boot,dm-pre-reloc; | |
21 | }; | |
22 | ||
23 | memory { | |
24 | reg = <0x70000000 0x4000000>; | |
25 | }; | |
26 | ||
27 | clocks { | |
28 | slow_xtal { | |
29 | clock-frequency = <32768>; | |
30 | }; | |
31 | ||
32 | main_xtal { | |
33 | clock-frequency = <12000000>; | |
34 | }; | |
35 | }; | |
36 | ||
37 | ahb { | |
38 | apb { | |
39 | dbgu: serial@ffffee00 { | |
40 | status = "okay"; | |
41 | u-boot,dm-pre-reloc; | |
42 | }; | |
43 | ||
44 | usart1: serial@fff90000 { | |
45 | pinctrl-0 = | |
46 | <&pinctrl_usart1 | |
47 | &pinctrl_usart1_rts | |
48 | &pinctrl_usart1_cts>; | |
49 | status = "okay"; | |
50 | }; | |
51 | ||
52 | macb0: ethernet@fffbc000 { | |
53 | phy-mode = "rmii"; | |
54 | status = "okay"; | |
55 | }; | |
56 | ||
57 | i2c0: i2c@fff84000 { | |
58 | status = "okay"; | |
59 | ov2640: camera@30 { | |
60 | compatible = "ovti,ov2640"; | |
61 | reg = <0x30>; | |
62 | pinctrl-names = "default"; | |
63 | pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; | |
64 | resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; | |
65 | pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; | |
66 | clocks = <&pck1>; | |
67 | clock-names = "xvclk"; | |
68 | assigned-clocks = <&pck1>; | |
69 | assigned-clock-rates = <25000000>; | |
70 | ||
71 | port { | |
72 | ov2640_0: endpoint { | |
73 | remote-endpoint = <&isi_0>; | |
74 | bus-width = <8>; | |
75 | }; | |
76 | }; | |
77 | }; | |
78 | }; | |
79 | ||
80 | i2c1: i2c@fff88000 { | |
81 | status = "okay"; | |
82 | }; | |
83 | ||
84 | watchdog@fffffd40 { | |
85 | status = "okay"; | |
86 | }; | |
87 | ||
88 | mmc0: mmc@fff80000 { | |
89 | pinctrl-0 = < | |
90 | &pinctrl_board_mmc0 | |
91 | &pinctrl_mmc0_slot0_clk_cmd_dat0 | |
92 | &pinctrl_mmc0_slot0_dat1_3>; | |
93 | status = "okay"; | |
94 | slot@0 { | |
95 | reg = <0>; | |
96 | bus-width = <4>; | |
97 | cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; | |
98 | }; | |
99 | }; | |
100 | ||
101 | mmc1: mmc@fffd0000 { | |
102 | pinctrl-0 = < | |
103 | &pinctrl_board_mmc1 | |
104 | &pinctrl_mmc1_slot0_clk_cmd_dat0 | |
105 | &pinctrl_mmc1_slot0_dat1_3>; | |
106 | status = "okay"; | |
107 | slot@0 { | |
108 | reg = <0>; | |
109 | bus-width = <4>; | |
110 | cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; | |
111 | wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; | |
112 | }; | |
113 | }; | |
114 | ||
115 | pinctrl@fffff200 { | |
116 | camera_sensor { | |
117 | pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { | |
118 | atmel,pins = | |
119 | <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; | |
120 | }; | |
121 | ||
122 | pinctrl_sensor_reset: sensor_reset-0 { | |
123 | atmel,pins = | |
124 | <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; | |
125 | }; | |
126 | ||
127 | pinctrl_sensor_power: sensor_power-0 { | |
128 | atmel,pins = | |
129 | <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; | |
130 | }; | |
131 | }; | |
132 | mmc0 { | |
133 | pinctrl_board_mmc0: mmc0-board { | |
134 | atmel,pins = | |
135 | <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ | |
136 | }; | |
137 | }; | |
138 | ||
139 | mmc1 { | |
140 | pinctrl_board_mmc1: mmc1-board { | |
141 | atmel,pins = | |
142 | <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ | |
143 | AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ | |
144 | }; | |
145 | }; | |
146 | ||
147 | pwm0 { | |
148 | pinctrl_pwm_leds: pwm-led { | |
149 | atmel,pins = | |
150 | <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */ | |
151 | AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */ | |
152 | }; | |
153 | }; | |
154 | }; | |
155 | ||
156 | spi0: spi@fffa4000{ | |
157 | status = "okay"; | |
158 | cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; | |
159 | mtd_dataflash@0 { | |
160 | compatible = "atmel,at45", "atmel,dataflash"; | |
161 | spi-max-frequency = <13000000>; | |
162 | reg = <0>; | |
163 | }; | |
164 | }; | |
165 | ||
166 | usb2: gadget@fff78000 { | |
167 | atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; | |
168 | status = "okay"; | |
169 | }; | |
170 | ||
171 | adc0: adc@fffb0000 { | |
172 | pinctrl-names = "default"; | |
173 | pinctrl-0 = < | |
174 | &pinctrl_adc0_ad0 | |
175 | &pinctrl_adc0_ad1 | |
176 | &pinctrl_adc0_ad2 | |
177 | &pinctrl_adc0_ad3 | |
178 | &pinctrl_adc0_ad4 | |
179 | &pinctrl_adc0_ad5 | |
180 | &pinctrl_adc0_ad6 | |
181 | &pinctrl_adc0_ad7>; | |
182 | atmel,adc-ts-wires = <4>; | |
183 | status = "okay"; | |
184 | }; | |
185 | ||
186 | isi@fffb4000 { | |
187 | pinctrl-names = "default"; | |
188 | pinctrl-0 = <&pinctrl_isi_data_0_7>; | |
189 | status = "okay"; | |
190 | port { | |
191 | isi_0: endpoint { | |
192 | remote-endpoint = <&ov2640_0>; | |
193 | bus-width = <8>; | |
194 | vsync-active = <1>; | |
195 | hsync-active = <1>; | |
196 | }; | |
197 | }; | |
198 | }; | |
199 | ||
200 | pwm0: pwm@fffb8000 { | |
201 | status = "okay"; | |
202 | ||
203 | pinctrl-names = "default"; | |
204 | pinctrl-0 = <&pinctrl_pwm_leds>; | |
205 | }; | |
206 | ||
207 | rtc@fffffd20 { | |
208 | atmel,rtt-rtc-time-reg = <&gpbr 0x0>; | |
209 | status = "okay"; | |
210 | }; | |
211 | ||
212 | gpbr: syscon@fffffd60 { | |
213 | status = "okay"; | |
214 | }; | |
215 | ||
216 | rtc@fffffdb0 { | |
217 | status = "okay"; | |
218 | }; | |
219 | }; | |
220 | ||
221 | fb0: fb@0x00500000 { | |
222 | display = <&display0>; | |
223 | status = "okay"; | |
224 | ||
225 | display0: display { | |
226 | bits-per-pixel = <32>; | |
227 | atmel,lcdcon-backlight; | |
228 | atmel,dmacon = <0x1>; | |
229 | atmel,lcdcon2 = <0x80008002>; | |
230 | atmel,guard-time = <9>; | |
231 | atmel,lcd-wiring-mode = "RGB"; | |
232 | ||
233 | display-timings { | |
234 | native-mode = <&timing0>; | |
235 | timing0: timing0 { | |
236 | clock-frequency = <9000000>; | |
237 | hactive = <480>; | |
238 | vactive = <272>; | |
239 | hback-porch = <1>; | |
240 | hfront-porch = <1>; | |
241 | vback-porch = <40>; | |
242 | vfront-porch = <1>; | |
243 | hsync-len = <45>; | |
244 | vsync-len = <1>; | |
245 | }; | |
246 | }; | |
247 | }; | |
248 | }; | |
249 | ||
250 | nand0: nand@40000000 { | |
251 | nand-bus-width = <8>; | |
252 | nand-ecc-mode = "soft"; | |
253 | nand-on-flash-bbt; | |
254 | status = "okay"; | |
255 | ||
256 | boot@0 { | |
257 | label = "bootstrap/uboot/kernel"; | |
258 | reg = <0x0 0x400000>; | |
259 | }; | |
260 | ||
261 | rootfs@400000 { | |
262 | label = "rootfs"; | |
263 | reg = <0x400000 0x3C00000>; | |
264 | }; | |
265 | ||
266 | data@4000000 { | |
267 | label = "data"; | |
268 | reg = <0x4000000 0xC000000>; | |
269 | }; | |
270 | }; | |
271 | ||
272 | usb0: ohci@00700000 { | |
273 | status = "okay"; | |
274 | num-ports = <2>; | |
275 | atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW | |
276 | &pioD 3 GPIO_ACTIVE_LOW>; | |
277 | }; | |
278 | ||
279 | usb1: ehci@00800000 { | |
280 | status = "okay"; | |
281 | }; | |
282 | }; | |
283 | ||
284 | leds { | |
285 | compatible = "gpio-leds"; | |
286 | ||
287 | d8 { | |
288 | label = "d8"; | |
289 | gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; | |
290 | linux,default-trigger = "heartbeat"; | |
291 | }; | |
292 | }; | |
293 | ||
294 | pwmleds { | |
295 | compatible = "pwm-leds"; | |
296 | ||
297 | d6 { | |
298 | label = "d6"; | |
299 | pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; | |
300 | max-brightness = <255>; | |
301 | linux,default-trigger = "nand-disk"; | |
302 | }; | |
303 | ||
304 | d7 { | |
305 | label = "d7"; | |
306 | pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; | |
307 | max-brightness = <255>; | |
308 | linux,default-trigger = "mmc0"; | |
309 | }; | |
310 | }; | |
311 | ||
312 | gpio_keys { | |
313 | compatible = "gpio-keys"; | |
314 | ||
315 | left_click { | |
316 | label = "left_click"; | |
317 | gpios = <&pioB 6 GPIO_ACTIVE_LOW>; | |
318 | linux,code = <272>; | |
319 | wakeup-source; | |
320 | }; | |
321 | ||
322 | right_click { | |
323 | label = "right_click"; | |
324 | gpios = <&pioB 7 GPIO_ACTIVE_LOW>; | |
325 | linux,code = <273>; | |
326 | wakeup-source; | |
327 | }; | |
328 | ||
329 | left { | |
330 | label = "Joystick Left"; | |
331 | gpios = <&pioB 14 GPIO_ACTIVE_LOW>; | |
332 | linux,code = <105>; | |
333 | }; | |
334 | ||
335 | right { | |
336 | label = "Joystick Right"; | |
337 | gpios = <&pioB 15 GPIO_ACTIVE_LOW>; | |
338 | linux,code = <106>; | |
339 | }; | |
340 | ||
341 | up { | |
342 | label = "Joystick Up"; | |
343 | gpios = <&pioB 16 GPIO_ACTIVE_LOW>; | |
344 | linux,code = <103>; | |
345 | }; | |
346 | ||
347 | down { | |
348 | label = "Joystick Down"; | |
349 | gpios = <&pioB 17 GPIO_ACTIVE_LOW>; | |
350 | linux,code = <108>; | |
351 | }; | |
352 | ||
353 | enter { | |
354 | label = "Joystick Press"; | |
355 | gpios = <&pioB 18 GPIO_ACTIVE_LOW>; | |
356 | linux,code = <28>; | |
357 | }; | |
358 | }; | |
359 | }; |