]>
Commit | Line | Data |
---|---|---|
4d02d206 PT |
1 | /* |
2 | * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH | |
3 | * | |
4 | * SPDX-License-Identifier: GPL-2.0+ X11 | |
5 | */ | |
6 | ||
7 | /dts-v1/; | |
8 | #include "rk3368.dtsi" | |
9 | #include "rk3368-lion-u-boot.dtsi" | |
10 | #include <dt-bindings/input/input.h> | |
11 | ||
12 | / { | |
13 | model = "Theobroma Systems RK3368-uQ7 SoM"; | |
14 | compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368"; | |
15 | ||
16 | aliases { | |
17 | mmc0 = &emmc; | |
18 | mmc1 = &sdmmc; | |
19 | }; | |
20 | ||
21 | memory@0 { | |
22 | device_type = "memory"; | |
23 | reg = <0x0 0x0 0x0 0x80000000>; | |
24 | }; | |
25 | ||
26 | ext_gmac: gmac-clk { | |
27 | compatible = "fixed-clock"; | |
28 | clock-frequency = <125000000>; | |
29 | clock-output-names = "ext_gmac"; | |
30 | #clock-cells = <0>; | |
31 | }; | |
32 | ||
33 | vcc_sys: vcc-sys-regulator { | |
34 | compatible = "regulator-fixed"; | |
35 | regulator-name = "vcc_sys"; | |
36 | regulator-min-microvolt = <5000000>; | |
37 | regulator-max-microvolt = <5000000>; | |
38 | regulator-always-on; | |
39 | regulator-boot-on; | |
40 | }; | |
41 | }; | |
42 | ||
43 | &uart0 { | |
44 | status = "okay"; | |
45 | }; | |
46 | ||
47 | &emmc { | |
48 | status = "okay"; | |
49 | bus-width = <8>; | |
50 | cap-mmc-highspeed; | |
51 | clock-frequency = <150000000>; | |
52 | disable-wp; | |
53 | keep-power-in-suspend; | |
54 | non-removable; | |
55 | num-slots = <1>; | |
56 | vmmc-supply = <&vcc33_io>; | |
57 | vqmmc-supply = <&vcc18_io>; | |
58 | pinctrl-names = "default"; | |
59 | pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; | |
60 | }; | |
61 | ||
62 | &sdmmc { | |
63 | status = "okay"; | |
64 | }; | |
65 | ||
66 | &gmac { | |
67 | status = "okay"; | |
68 | phy-supply = <&vcc33_io>; | |
69 | phy-mode = "rgmii"; | |
70 | clock_in_out = "input"; | |
71 | snps,reset-gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; | |
72 | snps,reset-active-low; | |
73 | snps,reset-delays-us = <2 10000 50000>; | |
74 | assigned-clocks = <&cru SCLK_MAC>; | |
75 | assigned-clock-parents = <&ext_gmac>; | |
76 | pinctrl-names = "default"; | |
77 | pinctrl-0 = <&rgmii_pins>; | |
78 | tx_delay = <0x10>; | |
79 | rx_delay = <0x10>; | |
80 | }; | |
81 | ||
82 | &i2c0 { | |
83 | status = "okay"; | |
84 | ||
85 | rk808: pmic@1b { | |
86 | compatible = "rockchip,rk808"; | |
87 | reg = <0x1b>; | |
88 | interrupt-parent = <&gpio0>; | |
89 | interrupts = <5 IRQ_TYPE_LEVEL_LOW>; | |
90 | rockchip,system-power-controller; | |
91 | vcc1-supply = <&vcc_sys>; | |
92 | vcc2-supply = <&vcc_sys>; | |
93 | vcc3-supply = <&vcc_sys>; | |
94 | vcc4-supply = <&vcc_sys>; | |
95 | vcc6-supply = <&vcc_sys>; | |
96 | vcc7-supply = <&vcc_sys>; | |
97 | vcc8-supply = <&vcc_sys>; | |
98 | vcc9-supply = <&vcc_sys>; | |
99 | vcc10-supply = <&vcc_sys>; | |
100 | vcc11-supply = <&vcc_sys>; | |
101 | vcc12-supply = <&vcc_sys>; | |
102 | clock-output-names = "xin32k", "rk808-clkout2"; | |
103 | #clock-cells = <1>; | |
104 | ||
105 | regulators { | |
106 | vdd_cpu: DCDC_REG1 { | |
107 | regulator-always-on; | |
108 | regulator-boot-on; | |
109 | regulator-min-microvolt = <700000>; | |
110 | regulator-max-microvolt = <1500000>; | |
111 | regulator-name = "vdd_cpu"; | |
112 | }; | |
113 | ||
114 | vdd_log: DCDC_REG2 { | |
115 | regulator-always-on; | |
116 | regulator-boot-on; | |
117 | regulator-min-microvolt = <700000>; | |
118 | regulator-max-microvolt = <1500000>; | |
119 | regulator-name = "vdd_log"; | |
120 | }; | |
121 | ||
122 | vcc_ddr: DCDC_REG3 { | |
123 | regulator-always-on; | |
124 | regulator-boot-on; | |
125 | regulator-name = "vcc_ddr"; | |
126 | }; | |
127 | ||
128 | vcc33_io: DCDC_REG4 { | |
129 | regulator-always-on; | |
130 | regulator-boot-on; | |
131 | regulator-min-microvolt = <3300000>; | |
132 | regulator-max-microvolt = <3300000>; | |
133 | regulator-name = "vcc33_io"; | |
134 | }; | |
135 | ||
136 | vcc33_video: LDO_REG2 { | |
137 | regulator-always-on; | |
138 | regulator-boot-on; | |
139 | regulator-min-microvolt = <3300000>; | |
140 | regulator-max-microvolt = <3300000>; | |
141 | regulator-name = "vcc33_video"; | |
142 | }; | |
143 | ||
144 | vdd10_pll: LDO_REG3 { | |
145 | regulator-always-on; | |
146 | regulator-boot-on; | |
147 | regulator-min-microvolt = <1000000>; | |
148 | regulator-max-microvolt = <1000000>; | |
149 | regulator-name = "vdd10_pll"; | |
150 | }; | |
151 | ||
152 | vcc18_io: LDO_REG4 { | |
153 | regulator-boot-on; | |
154 | regulator-min-microvolt = <1800000>; | |
155 | regulator-max-microvolt = <1800000>; | |
156 | regulator-name = "vcc18_io"; | |
157 | }; | |
158 | ||
159 | vdd10_video: LDO_REG6 { | |
160 | regulator-always-on; | |
161 | regulator-boot-on; | |
162 | regulator-min-microvolt = <1000000>; | |
163 | regulator-max-microvolt = <1000000>; | |
164 | regulator-name = "vdd10_video"; | |
165 | }; | |
166 | ||
167 | vcc18_video: LDO_REG8 { | |
168 | regulator-always-on; | |
169 | regulator-boot-on; | |
170 | regulator-min-microvolt = <1800000>; | |
171 | regulator-max-microvolt = <1800000>; | |
172 | regulator-name = "vcc18_video"; | |
173 | }; | |
174 | }; | |
175 | }; | |
176 | }; | |
177 | ||
178 | &uart0 { | |
179 | status = "okay"; | |
180 | }; | |
181 | ||
182 | &spi1 { | |
183 | status = "okay"; | |
184 | ||
185 | #address-cells = <1>; | |
186 | #size-cells = <0>; | |
187 | ||
188 | spiflash: w25q32dw@0 { | |
189 | compatible = "spi-flash"; | |
190 | reg = <0>; | |
191 | spi-max-frequency = <49500000>; | |
192 | spi-cpol; | |
193 | spi-cpha; | |
194 | }; | |
195 | }; |