]>
Commit | Line | Data |
---|---|---|
ea4bc120 LW |
1 | /* |
2 | * (C) Copyright 2011 | |
3 | * Marvell Semiconductor <www.marvell.com> | |
4 | * Written-by: Lei Wen <leiwen@marvell.com> | |
5 | * | |
1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
ea4bc120 LW |
7 | */ |
8 | ||
9 | #include <common.h> | |
10 | #include <mvmfp.h> | |
19d3dbe2 | 11 | #include <i2c.h> |
ea4bc120 LW |
12 | #include <asm/arch/mfp.h> |
13 | #include <asm/arch/cpu.h> | |
19d3dbe2 LW |
14 | #ifdef CONFIG_GENERIC_MMC |
15 | #include <sdhci.h> | |
16 | #endif | |
ea4bc120 LW |
17 | |
18 | DECLARE_GLOBAL_DATA_PTR; | |
19 | ||
20 | int board_early_init_f(void) | |
21 | { | |
22 | u32 mfp_cfg[] = { | |
23 | /* Enable Console on UART2 */ | |
24 | MFP47_UART2_RXD, | |
25 | MFP48_UART2_TXD, | |
26 | ||
aa3b168e LW |
27 | /* I2C */ |
28 | MFP53_CI2C_SCL, | |
29 | MFP54_CI2C_SDA, | |
30 | ||
19d3dbe2 LW |
31 | /* MMC1 */ |
32 | MFP_MMC1_DAT7, | |
33 | MFP_MMC1_DAT6, | |
34 | MFP_MMC1_DAT5, | |
35 | MFP_MMC1_DAT4, | |
36 | MFP_MMC1_DAT3, | |
37 | MFP_MMC1_DAT2, | |
38 | MFP_MMC1_DAT1, | |
39 | MFP_MMC1_DAT0, | |
40 | MFP_MMC1_CMD, | |
41 | MFP_MMC1_CLK, | |
42 | MFP_MMC1_CD, | |
43 | MFP_MMC1_WP, | |
44 | ||
ea4bc120 LW |
45 | MFP_EOC /*End of configureation*/ |
46 | }; | |
47 | /* configure MFP's */ | |
48 | mfp_config(mfp_cfg); | |
49 | ||
50 | return 0; | |
51 | } | |
52 | ||
53 | int board_init(void) | |
54 | { | |
55 | /* arch number of Board */ | |
56 | gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB; | |
57 | /* adress of boot parameters */ | |
58 | gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100; | |
59 | return 0; | |
60 | } | |
19d3dbe2 LW |
61 | |
62 | #ifdef CONFIG_GENERIC_MMC | |
63 | #define I2C_SLAVE_ADDR 0x34 | |
64 | #define LDO13_REG 0x28 | |
65 | #define LDO_V30 0x6 | |
66 | #define LDO_VOLTAGE(x) ((x & 0x7) << 1) | |
67 | #define LDO_EN 0x1 | |
68 | int board_mmc_init(bd_t *bd) | |
69 | { | |
70 | ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE; | |
71 | u8 i, data; | |
72 | ||
73 | /* set LDO 13 to 3.0v */ | |
74 | data = LDO_VOLTAGE(LDO_V30) | LDO_EN; | |
75 | i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1); | |
76 | ||
77 | for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) { | |
78 | if (mv_sdh_init(mmc_base_address[i], 0, 0, | |
79 | SDHCI_QUIRK_32BIT_DMA_ADDR)) | |
80 | return 1; | |
81 | } | |
82 | ||
83 | return 0; | |
84 | } | |
85 | #endif |