projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| e7b9aa96 | 1 | /* |
| a187559e | 2 | * U-Boot - main board file |
| e7b9aa96 SZ |
3 | * |
| 4 | * Copyright (c) 2008-2011 Analog Devices Inc. | |
| 5 | * | |
| 6 | * Licensed under the GPL-2 or later. | |
| 7 | */ | |
| 8 | ||
| 7d861d95 BL |
9 | #ifndef __BOARD_SOFT_SWITCH_H__ |
| 10 | #define __BOARD_SOFT_SWITCH_H__ | |
| 11 | ||
| 12 | #include <asm/soft_switch.h> | |
| e7b9aa96 SZ |
13 | |
| 14 | /* switch 0 port A */ | |
| 15 | #define CAN_EN 0x1 | |
| 16 | #define CAN_STB 0x2 | |
| 17 | #define CAN0_ERR_EN 0x4 | |
| 18 | #define CAN0RX_EN 0x8 | |
| 19 | #define CNT0UD_EN 0x10 | |
| 20 | #define CNT0DG_EN 0x20 | |
| 21 | #define CNT0ZM_EN 0x40 | |
| 22 | #define RMII_CLK_EN 0x80 | |
| 23 | ||
| 24 | /* switch 0 port B */ | |
| 25 | #define UART0RTS_EN 0x1 | |
| 26 | #define UART0RX_EN 0x2 | |
| 27 | #define UART0CTS_EN 0x4 | |
| 28 | #define UART0CTS_RTS_LPBK 0x8 | |
| 29 | #define UART0CTS_RST_EN 0x10 | |
| 30 | #define UART0CTS_146_EN 0x20 | |
| 31 | #define TEMP_IRQ_EN 0x40 | |
| 32 | #define TEMP_THERM_EN 0x80 | |
| 33 | ||
| 34 | /* switch 1 port A */ | |
| 35 | #define OVERRIDE_SMC0_LP0_BOOT 0x1 | |
| 36 | #define SMC0_EPPI2_LP1_SWITCH 0x2 | |
| 37 | #define SMC0_LP0_EN 0x8 | |
| 38 | #define LED1_GPIO_EN 0x10 | |
| 39 | #define LED2_GPIO_EN 0x20 | |
| 40 | #define LED3_GPIO_EN 0x40 | |
| 41 | #define LED4_GPIO_EN 0x80 | |
| 42 | ||
| 43 | /* switch 1 port B */ | |
| 44 | #define PUSHBUTTON1_EN 0x1 | |
| 45 | #define PUSHBUTTON2_EN 0x2 | |
| 46 | #define SD_CD_EN 0x4 | |
| 47 | #define SD_WP_EN 0x8 | |
| 48 | #define SPIFLASH_CS_EN 0x10 | |
| 49 | #define SPI0D2_EN 0x20 | |
| 50 | #define SPI0D3_EN 0x40 | |
| 51 | ||
| 52 | /* switch 2 port A */ | |
| 53 | #define PHYINT_EN 0x1 | |
| 54 | #define PHY_PWR_DWN_INT 0x2 | |
| 55 | #define PHYAD0 0x4 | |
| 56 | #define ETHERNET_EN 0x8 | |
| 57 | #define WAKE_PUSHBUTTON_EN 0x10 | |
| 58 | #define PD0_SPI0D2_EN 0x20 | |
| 59 | #define PD1_SPI0D3_EN 0x40 | |
| 60 | #define PD2_SPI0MISO_EN 0x80 | |
| 61 | ||
| 62 | /* switch 2 port B */ | |
| 63 | #define PD3_SPI0MOSI_EN 0x1 | |
| 64 | #define PD4_SPI0CK_EN 0x2 | |
| 65 | ||
| 7d861d95 BL |
66 | #ifdef CONFIG_BFIN_BOARD_VERSION_1_0 |
| 67 | #define SWITCH_ADDR 0x21 | |
| 68 | #else | |
| 69 | #define SWITCH_ADDR 0x20 | |
| 70 | #endif | |
| 71 | ||
| 72 | #define NUM_SWITCH 3 | |
| 73 | #define IODIRA 0x0 | |
| 74 | #define IODIRB 0x1 | |
| 75 | #define OLATA 0x14 | |
| 76 | #define OLATB 0x15 | |
| e7b9aa96 | 77 | |
| e7b9aa96 | 78 | int setup_board_switches(void); |
| 7d861d95 BL |
79 | |
| 80 | #endif /* __BOARD_SOFT_SWITCH_H__ */ |