]> git.ipfire.org Git - people/ms/u-boot.git/blame - board/freescale/mx6sabresd/mx6sabresd.c
projects / people / ms / u-boot.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
warp: Add MAX77696 support
[people/ms/u-boot.git] / board / freescale / mx6sabresd / mx6sabresd.c
CommitLineData
7891e258
FE		 1/*
2 * Copyright (C) 2012 Freescale Semiconductor, Inc.
3 *
4 * Author: Fabio Estevam <fabio.estevam@freescale.com>
5 *
1a459660 6 * SPDX-License-Identifier: GPL-2.0+
7891e258
FE		 7 */
8
7891e258
FE		 9#include <asm/arch/clock.h>
10#include <asm/arch/imx-regs.h>
11#include <asm/arch/iomux.h>
c1747970 12#include <asm/arch/mx6-pins.h>
7891e258
FE		 13#include <asm/errno.h>
14#include <asm/gpio.h>
66ca09fc 15#include <asm/imx-common/mxc_i2c.h>
7891e258 16#include <asm/imx-common/iomux-v3.h>
85449dbd 17#include <asm/imx-common/boot_mode.h>
053b795e 18#include <asm/imx-common/video.h>
7891e258
FE		 19#include <mmc.h>
20#include <fsl_esdhc.h>
21#include <miiphy.h>
22#include <netdev.h>
58cc9787
PKS		 23#include <asm/arch/mxc_hdmi.h>
24#include <asm/arch/crm_regs.h>
58cc9787
PKS		 25#include <asm/io.h>
26#include <asm/arch/sys_proto.h>
66ca09fc
FE		 27#include <i2c.h>
28#include <power/pmic.h>
29#include <power/pfuze100_pmic.h>
f0fabb79 30#include "../common/pfuze.h"
75f2ba42 31#include <asm/arch/mx6-ddr.h>
5a3d63c5 32#include <usb.h>
75f2ba42 33
7891e258
FE		 34DECLARE_GLOBAL_DATA_PTR;
35
7e2173cf
BT		 36#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
37 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
38 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
7891e258 39
7e2173cf
BT		 40#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
41 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
42 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
7891e258 43
7e2173cf
BT		 44#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
45 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
7891e258 46
8bfa9c69
FE		 47#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
48 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
49
66ca09fc
FE		 50#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
51 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
52 PAD_CTL_ODE | PAD_CTL_SRE_FAST)
53
54#define I2C_PMIC 1
55
56#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
57
ca9d817a
FE		 58#define DISP0_PWR_EN IMX_GPIO_NR(1, 21)
59
7891e258
FE		 60int dram_init(void)
61{
75f2ba42 62 gd->ram_size = imx_ddr_size();
7891e258
FE		 63 return 0;
64}
65
3302c275 66static iomux_v3_cfg_t const uart1_pads[] = {
10fda487
EN		 67 MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
68 MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
7891e258
FE		 69};
70
3302c275 71static iomux_v3_cfg_t const enet_pads[] = {
cfb8b9d3
EN		 72 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
73 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
10fda487
EN		 74 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
75 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
76 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
77 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
78 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
cfb8b9d3
EN		 79 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
80 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
10fda487
EN		 81 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
82 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
83 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
84 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
85 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
cfb8b9d3 86 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
a0d21fc0 87 /* AR8031 PHY Reset */
10fda487 88 MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
a0d21fc0
FE		 89};
90
91static void setup_iomux_enet(void)
92{
93 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
94
95 /* Reset AR8031 PHY */
96 gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
97 udelay(500);
98 gpio_set_value(IMX_GPIO_NR(1, 25), 1);
99}
100
3302c275 101static iomux_v3_cfg_t const usdhc2_pads[] = {
10fda487
EN		 102 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
103 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
104 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
105 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
106 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
107 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
108 MX6_PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
109 MX6_PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
110 MX6_PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
111 MX6_PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
112 MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
de7d02ae
SG		 113};
114
3302c275 115static iomux_v3_cfg_t const usdhc3_pads[] = {
10fda487
EN		 116 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
117 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
118 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
119 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
120 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
121 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
122 MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
123 MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
124 MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
125 MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
126 MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
7891e258
FE		 127};
128
3302c275 129static iomux_v3_cfg_t const usdhc4_pads[] = {
10fda487
EN		 130 MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
131 MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
132 MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
133 MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
134 MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
135 MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
136 MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
137 MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
138 MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
139 MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
de7d02ae
SG		 140};
141
3302c275 142static iomux_v3_cfg_t const ecspi1_pads[] = {
8bfa9c69
FE		 143 MX6_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
144 MX6_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
145 MX6_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
146 MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
147};
148
ca9d817a
FE		 149static iomux_v3_cfg_t const rgb_pads[] = {
150 MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
151 MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL),
152 MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL),
153 MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL),
154 MX6_PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(NO_PAD_CTRL),
155 MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
156 MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
157 MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
158 MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
159 MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
160 MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
161 MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
162 MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
163 MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(NO_PAD_CTRL),
164 MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(NO_PAD_CTRL),
165 MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL),
166 MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL),
167 MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL),
168 MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL),
169 MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL),
170 MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL),
171 MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(NO_PAD_CTRL),
172 MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(NO_PAD_CTRL),
173 MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 | MUX_PAD_CTRL(NO_PAD_CTRL),
174 MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 | MUX_PAD_CTRL(NO_PAD_CTRL),
175 MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 | MUX_PAD_CTRL(NO_PAD_CTRL),
176 MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 | MUX_PAD_CTRL(NO_PAD_CTRL),
177 MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 | MUX_PAD_CTRL(NO_PAD_CTRL),
178 MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 | MUX_PAD_CTRL(NO_PAD_CTRL),
179 MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
180};
181
182static void enable_rgb(struct display_info_t const *dev)
183{
184 imx_iomux_v3_setup_multiple_pads(rgb_pads, ARRAY_SIZE(rgb_pads));
185 gpio_direction_output(DISP0_PWR_EN, 1);
186}
187
66ca09fc
FE		 188static struct i2c_pads_info i2c_pad_info1 = {
189 .scl = {
190 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
191 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
192 .gp = IMX_GPIO_NR(4, 12)
193 },
194 .sda = {
195 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
196 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
197 .gp = IMX_GPIO_NR(4, 13)
198 }
199};
200
8bfa9c69
FE		 201static void setup_spi(void)
202{
203 imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
204}
205
e919aa23
MV		 206iomux_v3_cfg_t const pcie_pads[] = {
207 MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), /* POWER */
208 MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), /* RESET */
209};
210
211static void setup_pcie(void)
212{
213 imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
214}
215
be4ab3dd
FE		 216iomux_v3_cfg_t const di0_pads[] = {
217 MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* DISP0_CLK */
218 MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02, /* DISP0_HSYNC */
219 MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, /* DISP0_VSYNC */
220};
221
7891e258
FE		 222static void setup_iomux_uart(void)
223{
224 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
225}
226
227#ifdef CONFIG_FSL_ESDHC
de7d02ae
SG		 228struct fsl_esdhc_cfg usdhc_cfg[3] = {
229 {USDHC2_BASE_ADDR},
7891e258 230 {USDHC3_BASE_ADDR},
de7d02ae 231 {USDHC4_BASE_ADDR},
7891e258
FE		 232};
233
de7d02ae
SG		 234#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
235#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
236
7891e258
FE		 237int board_mmc_getcd(struct mmc *mmc)
238{
de7d02ae 239 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
60bb4621 240 int ret = 0;
de7d02ae
SG		 241
242 switch (cfg->esdhc_base) {
243 case USDHC2_BASE_ADDR:
60bb4621
OS		 244 ret = !gpio_get_value(USDHC2_CD_GPIO);
245 break;
de7d02ae 246 case USDHC3_BASE_ADDR:
60bb4621
OS		 247 ret = !gpio_get_value(USDHC3_CD_GPIO);
248 break;
249 case USDHC4_BASE_ADDR:
250 ret = 1; /* eMMC/uSDHC4 is always present */
251 break;
de7d02ae 252 }
60bb4621
OS		 253
254 return ret;
7891e258
FE		 255}
256
257int board_mmc_init(bd_t *bis)
258{
75f2ba42 259#ifndef CONFIG_SPL_BUILD
952fdc4e 260 int ret;
de7d02ae
SG		 261 int i;
262
28ff917c
OS		 263 /*
264 * According to the board_mmc_init() the following map is done:
265 * (U-boot device node) (Physical Port)
266 * mmc0 SD2
267 * mmc1 SD3
268 * mmc2 eMMC
269 */
de7d02ae
SG		 270 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
271 switch (i) {
272 case 0:
273 imx_iomux_v3_setup_multiple_pads(
274 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
275 gpio_direction_input(USDHC2_CD_GPIO);
276 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
277 break;
278 case 1:
279 imx_iomux_v3_setup_multiple_pads(
280 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
281 gpio_direction_input(USDHC3_CD_GPIO);
282 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
283 break;
284 case 2:
285 imx_iomux_v3_setup_multiple_pads(
286 usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
287 usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
288 break;
289 default:
290 printf("Warning: you configured more USDHC controllers"
f07e286c
OS		 291 "(%d) then supported by the board (%d)\n",
292 i + 1, CONFIG_SYS_FSL_USDHC_NUM);
952fdc4e 293 return -EINVAL;
f07e286c 294 }
de7d02ae 295
952fdc4e
FE		 296 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
297 if (ret)
298 return ret;
de7d02ae 299 }
7891e258 300
952fdc4e 301 return 0;
75f2ba42 302#else
ae80eecc
FE		 303 struct src *psrc = (struct src *)SRC_BASE_ADDR;
304 unsigned reg = readl(&psrc->sbmr1) >> 11;
75f2ba42
JT		 305 /*
306 * Upon reading BOOT_CFG register the following map is done:
307 * Bit 11 and 12 of BOOT_CFG register can determine the current
308 * mmc port
309 * 0x1 SD1
310 * 0x2 SD2
311 * 0x3 SD4
312 */
313
314 switch (reg & 0x3) {
315 case 0x1:
316 imx_iomux_v3_setup_multiple_pads(
317 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
318 usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
319 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
320 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
321 break;
322 case 0x2:
323 imx_iomux_v3_setup_multiple_pads(
324 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
325 usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
326 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
327 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
328 break;
329 case 0x3:
330 imx_iomux_v3_setup_multiple_pads(
331 usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
332 usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
333 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
334 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
335 break;
336 }
337
338 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
339#endif
7891e258
FE		 340}
341#endif
342
a0d21fc0
FE		 343int mx6_rgmii_rework(struct phy_device *phydev)
344{
345 unsigned short val;
346
347 /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
348 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
349 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
350 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
351
352 val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
353 val &= 0xffe3;
354 val |= 0x18;
355 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
356
357 /* introduce tx clock delay */
358 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
359 val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
360 val |= 0x0100;
361 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
362
363 return 0;
364}
365
366int board_phy_config(struct phy_device *phydev)
367{
368 mx6_rgmii_rework(phydev);
369
370 if (phydev->drv->config)
371 phydev->drv->config(phydev);
372
373 return 0;
374}
375
58cc9787 376#if defined(CONFIG_VIDEO_IPUV3)
b48e3b04
FE		 377static void disable_lvds(struct display_info_t const *dev)
378{
379 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
380
381 int reg = readl(&iomux->gpr[2]);
382
383 reg &= ~(IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
384 IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
385
386 writel(reg, &iomux->gpr[2]);
387}
388
d9b89460
FE		 389static void do_enable_hdmi(struct display_info_t const *dev)
390{
b48e3b04 391 disable_lvds(dev);
d9b89460
FE		 392 imx_enable_hdmi_phy();
393}
58cc9787 394
d9b89460
FE		 395static void enable_lvds(struct display_info_t const *dev)
396{
397 struct iomuxc *iomux = (struct iomuxc *)
398 IOMUXC_BASE_ADDR;
399 u32 reg = readl(&iomux->gpr[2]);
119e9909
FE		 400 reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
401 IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT;
d9b89460
FE		 402 writel(reg, &iomux->gpr[2]);
403}
b48e3b04 404
053b795e 405struct display_info_t const displays[] = {{
d9b89460
FE		 406 .bus = -1,
407 .addr = 0,
119e9909 408 .pixfmt = IPU_PIX_FMT_RGB666,
b48e3b04
FE		 409 .detect = NULL,
410 .enable = enable_lvds,
d9b89460 411 .mode = {
b48e3b04 412 .name = "Hannstar-XGA",
d9b89460
FE		 413 .refresh = 60,
414 .xres = 1024,
415 .yres = 768,
416 .pixclock = 15385,
417 .left_margin = 220,
418 .right_margin = 40,
419 .upper_margin = 21,
420 .lower_margin = 7,
421 .hsync_len = 60,
422 .vsync_len = 10,
423 .sync = FB_SYNC_EXT,
424 .vmode = FB_VMODE_NONINTERLACED
425} }, {
426 .bus = -1,
427 .addr = 0,
b48e3b04
FE		 428 .pixfmt = IPU_PIX_FMT_RGB24,
429 .detect = detect_hdmi,
430 .enable = do_enable_hdmi,
d9b89460 431 .mode = {
b48e3b04 432 .name = "HDMI",
d9b89460
FE		 433 .refresh = 60,
434 .xres = 1024,
435 .yres = 768,
436 .pixclock = 15385,
437 .left_margin = 220,
438 .right_margin = 40,
439 .upper_margin = 21,
440 .lower_margin = 7,
441 .hsync_len = 60,
442 .vsync_len = 10,
443 .sync = FB_SYNC_EXT,
444 .vmode = FB_VMODE_NONINTERLACED
ca9d817a
FE		 445} }, {
446 .bus = 0,
447 .addr = 0,
448 .pixfmt = IPU_PIX_FMT_RGB24,
449 .detect = NULL,
450 .enable = enable_rgb,
451 .mode = {
452 .name = "SEIKO-WVGA",
453 .refresh = 60,
454 .xres = 800,
455 .yres = 480,
456 .pixclock = 29850,
457 .left_margin = 89,
458 .right_margin = 164,
459 .upper_margin = 23,
460 .lower_margin = 10,
461 .hsync_len = 10,
462 .vsync_len = 10,
463 .sync = 0,
464 .vmode = FB_VMODE_NONINTERLACED
d9b89460 465} } };
053b795e 466size_t display_count = ARRAY_SIZE(displays);
58cc9787
PKS		 467
468static void setup_display(void)
469{
470 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
d9b89460 471 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
58cc9787
PKS		 472 int reg;
473
be4ab3dd
FE		 474 /* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */
475 imx_iomux_v3_setup_multiple_pads(di0_pads, ARRAY_SIZE(di0_pads));
476
58cc9787
PKS		 477 enable_ipu_clock();
478 imx_setup_hdmi();
479
d9b89460 480 /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */
12307437 481 reg = readl(&mxc_ccm->CCGR3);
d9b89460
FE		 482 reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
483 writel(reg, &mxc_ccm->CCGR3);
484
485 /* set LDB0, LDB1 clk select to 011/011 */
486 reg = readl(&mxc_ccm->cs2cdr);
487 reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
488 | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
489 reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
490 | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
491 writel(reg, &mxc_ccm->cs2cdr);
492
493 reg = readl(&mxc_ccm->cscmr2);
494 reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
495 writel(reg, &mxc_ccm->cscmr2);
496
58cc9787
PKS		 497 reg = readl(&mxc_ccm->chsccdr);
498 reg |= (CHSCCDR_CLK_SEL_LDB_DI0
499 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
d9b89460
FE		 500 reg |= (CHSCCDR_CLK_SEL_LDB_DI0
501 << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
58cc9787 502 writel(reg, &mxc_ccm->chsccdr);
d9b89460
FE		 503
504 reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
505 | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
506 | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
507 | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
508 | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
509 | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
510 | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
511 | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED
512 | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0;
513 writel(reg, &iomux->gpr[2]);
514
515 reg = readl(&iomux->gpr[3]);
516 reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK
517 | IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
518 | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
519 << IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET);
520 writel(reg, &iomux->gpr[3]);
58cc9787
PKS		 521}
522#endif /* CONFIG_VIDEO_IPUV3 */
523
524/*
525 * Do not overwrite the console
526 * Use always serial for U-Boot console
527 */
528int overwrite_console(void)
529{
530 return 1;
531}
532
a0d21fc0
FE		 533int board_eth_init(bd_t *bis)
534{
a0d21fc0 535 setup_iomux_enet();
e919aa23 536 setup_pcie();
a0d21fc0 537
92c707a5 538 return cpu_eth_init(bis);
a0d21fc0
FE		 539}
540
5a3d63c5
PF		 541#ifdef CONFIG_USB_EHCI_MX6
542#define USB_OTHERREGS_OFFSET 0x800
543#define UCTRL_PWR_POL (1 << 9)
544
545static iomux_v3_cfg_t const usb_otg_pads[] = {
546 MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
547 MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
548};
549
550static iomux_v3_cfg_t const usb_hc1_pads[] = {
551 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
552};
553
554static void setup_usb(void)
555{
556 imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
557 ARRAY_SIZE(usb_otg_pads));
558
559 /*
560 * set daisy chain for otg_pin_id on 6q.
561 * for 6dl, this bit is reserved
562 */
563 imx_iomux_set_gpr_register(1, 13, 1, 0);
564
565 imx_iomux_v3_setup_multiple_pads(usb_hc1_pads,
566 ARRAY_SIZE(usb_hc1_pads));
567}
568
569int board_ehci_hcd_init(int port)
570{
571 u32 *usbnc_usb_ctrl;
572
573 if (port > 1)
574 return -EINVAL;
575
576 usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
577 port * 4);
578
579 setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
580
581 return 0;
582}
583
584int board_ehci_power(int port, int on)
585{
586 switch (port) {
587 case 0:
588 break;
589 case 1:
590 if (on)
591 gpio_direction_output(IMX_GPIO_NR(1, 29), 1);
592 else
593 gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
594 break;
595 default:
596 printf("MXC USB port %d not yet supported\n", port);
597 return -EINVAL;
598 }
599
600 return 0;
601}
602#endif
603
7891e258
FE		 604int board_early_init_f(void)
605{
606 setup_iomux_uart();
58cc9787
PKS		 607#if defined(CONFIG_VIDEO_IPUV3)
608 setup_display();
609#endif
7891e258
FE		 610
611 return 0;
612}
613
614int board_init(void)
615{
616 /* address of boot parameters */
617 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
618
8bfa9c69
FE		 619#ifdef CONFIG_MXC_SPI
620 setup_spi();
621#endif
66ca09fc
FE		 622 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
623
5a3d63c5
PF		 624#ifdef CONFIG_USB_EHCI_MX6
625 setup_usb();
626#endif
627
66ca09fc
FE		 628 return 0;
629}
630
f0fabb79 631int power_init_board(void)
66ca09fc
FE		 632{
633 struct pmic *p;
258c98f8 634 unsigned int reg, ret;
66ca09fc 635
f0fabb79
YL		 636 p = pfuze_common_init(I2C_PMIC);
637 if (!p)
638 return -ENODEV;
66ca09fc 639
258c98f8
PF		 640 ret = pfuze_mode_init(p, APS_PFM);
641 if (ret < 0)
642 return ret;
643
66ca09fc
FE		 644 /* Increase VGEN3 from 2.5 to 2.8V */
645 pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
f0fabb79
YL		 646 reg &= ~LDO_VOL_MASK;
647 reg |= LDOB_2_80V;
66ca09fc
FE		 648 pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
649
650 /* Increase VGEN5 from 2.8 to 3V */
651 pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
f0fabb79
YL		 652 reg &= ~LDO_VOL_MASK;
653 reg |= LDOB_3_00V;
66ca09fc
FE		 654 pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
655
7891e258
FE		 656 return 0;
657}
658
155fa9af
NK		 659#ifdef CONFIG_MXC_SPI
660int board_spi_cs_gpio(unsigned bus, unsigned cs)
661{
662 return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
663}
664#endif
665
85449dbd
OS		 666#ifdef CONFIG_CMD_BMODE
667static const struct boot_mode board_boot_modes[] = {
668 /* 4 bit bus width */
669 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
670 {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
671 /* 8 bit bus width */
672 {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
673 {NULL, 0},
674};
675#endif
676
677int board_late_init(void)
678{
679#ifdef CONFIG_CMD_BMODE
680 add_board_boot_modes(board_boot_modes);
681#endif
85449dbd
OS		 682 return 0;
683}
684
7891e258
FE		 685int checkboard(void)
686{
c1747970 687 puts("Board: MX6-SabreSD\n");
7891e258
FE		 688 return 0;
689}
75f2ba42
JT		 690
691#ifdef CONFIG_SPL_BUILD
692#include <spl.h>
693#include <libfdt.h>
694
695const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
696 .dram_sdclk_0 = 0x00020030,
697 .dram_sdclk_1 = 0x00020030,
698 .dram_cas = 0x00020030,
699 .dram_ras = 0x00020030,
700 .dram_reset = 0x00020030,
701 .dram_sdcke0 = 0x00003000,
702 .dram_sdcke1 = 0x00003000,
703 .dram_sdba2 = 0x00000000,
704 .dram_sdodt0 = 0x00003030,
705 .dram_sdodt1 = 0x00003030,
706 .dram_sdqs0 = 0x00000030,
707 .dram_sdqs1 = 0x00000030,
708 .dram_sdqs2 = 0x00000030,
709 .dram_sdqs3 = 0x00000030,
710 .dram_sdqs4 = 0x00000030,
711 .dram_sdqs5 = 0x00000030,
712 .dram_sdqs6 = 0x00000030,
713 .dram_sdqs7 = 0x00000030,
714 .dram_dqm0 = 0x00020030,
715 .dram_dqm1 = 0x00020030,
716 .dram_dqm2 = 0x00020030,
717 .dram_dqm3 = 0x00020030,
718 .dram_dqm4 = 0x00020030,
719 .dram_dqm5 = 0x00020030,
720 .dram_dqm6 = 0x00020030,
721 .dram_dqm7 = 0x00020030,
722};
723
724const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
725 .grp_ddr_type = 0x000C0000,
726 .grp_ddrmode_ctl = 0x00020000,
727 .grp_ddrpke = 0x00000000,
728 .grp_addds = 0x00000030,
729 .grp_ctlds = 0x00000030,
730 .grp_ddrmode = 0x00020000,
731 .grp_b0ds = 0x00000030,
732 .grp_b1ds = 0x00000030,
733 .grp_b2ds = 0x00000030,
734 .grp_b3ds = 0x00000030,
735 .grp_b4ds = 0x00000030,
736 .grp_b5ds = 0x00000030,
737 .grp_b6ds = 0x00000030,
738 .grp_b7ds = 0x00000030,
739};
740
741const struct mx6_mmdc_calibration mx6_mmcd_calib = {
742 .p0_mpwldectrl0 = 0x001F001F,
743 .p0_mpwldectrl1 = 0x001F001F,
744 .p1_mpwldectrl0 = 0x00440044,
745 .p1_mpwldectrl1 = 0x00440044,
746 .p0_mpdgctrl0 = 0x434B0350,
747 .p0_mpdgctrl1 = 0x034C0359,
748 .p1_mpdgctrl0 = 0x434B0350,
749 .p1_mpdgctrl1 = 0x03650348,
750 .p0_mprddlctl = 0x4436383B,
751 .p1_mprddlctl = 0x39393341,
752 .p0_mpwrdlctl = 0x35373933,
753 .p1_mpwrdlctl = 0x48254A36,
754};
755
407be42d 756/* MT41K128M16JT-125 */
75f2ba42
JT		 757static struct mx6_ddr3_cfg mem_ddr = {
758 .mem_speed = 1600,
407be42d
FE		 759 .density = 2,
760 .width = 16,
75f2ba42
JT		 761 .banks = 8,
762 .rowaddr = 14,
763 .coladdr = 10,
764 .pagesz = 2,
765 .trcd = 1375,
766 .trcmin = 4875,
767 .trasmin = 3500,
768};
769
6e9b6bb5
FE		 770static void ccgr_init(void)
771{
772 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
773
774 writel(0x00C03F3F, &ccm->CCGR0);
775 writel(0x0030FC03, &ccm->CCGR1);
776 writel(0x0FFFC000, &ccm->CCGR2);
777 writel(0x3FF00000, &ccm->CCGR3);
778 writel(0x00FFF300, &ccm->CCGR4);
779 writel(0x0F0000C3, &ccm->CCGR5);
780 writel(0x000003FF, &ccm->CCGR6);
781}
782
783static void gpr_init(void)
784{
785 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
786
787 /* enable AXI cache for VDOA/VPU/IPU */
788 writel(0xF00000CF, &iomux->gpr[4]);
789 /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
790 writel(0x007F007F, &iomux->gpr[6]);
791 writel(0x007F007F, &iomux->gpr[7]);
792}
793
75f2ba42 794/*
c9c41d0e
FE		 795 * This section requires the differentiation between iMX6 Sabre boards, but
796 * for now, it will configure only for the mx6q variant.
75f2ba42
JT		 797 */
798static void spl_dram_init(void)
799{
800 struct mx6_ddr_sysinfo sysinfo = {
801 /* width of data bus:0=16,1=32,2=64 */
407be42d 802 .dsize = 2,
75f2ba42
JT		 803 /* config for full 4GB range so that get_mem_size() works */
804 .cs_density = 32, /* 32Gb per CS */
805 /* single chip select */
806 .ncs = 1,
807 .cs1_mirror = 0,
808 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
75f2ba42 809 .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */
75f2ba42
JT		 810 .walat = 1, /* Write additional latency */
811 .ralat = 5, /* Read additional latency */
812 .mif3_mode = 3, /* Command prediction working mode */
813 .bi_on = 1, /* Bank interleaving enabled */
814 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
815 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
816 };
817
407be42d 818 mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);
75f2ba42
JT		 819 mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr);
820}
821
822void board_init_f(ulong dummy)
823{
824 /* setup AIPS and disable watchdog */
825 arch_cpu_init();
826
6e9b6bb5
FE		 827 ccgr_init();
828 gpr_init();
829
75f2ba42
JT		 830 /* iomux and setup of i2c */
831 board_early_init_f();
832
833 /* setup GP timer */
834 timer_init();
835
836 /* UART clocks enabled and gd valid - init serial console */
837 preloader_console_init();
838
839 /* DDR initialization */
840 spl_dram_init();
841
842 /* Clear the BSS. */
843 memset(__bss_start, 0, __bss_end - __bss_start);
844
845 /* load/boot image from boot device */
846 board_init_r(NULL, 0);
847}
848
849void reset_cpu(ulong addr)
850{
851}
852#endif
"Das U-Boot" Source Tree