]>
Commit | Line | Data |
---|---|---|
4d6c9671 PW |
1 | /* |
2 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. All rights reserved. | |
3 | * Sanghee Kim <sh0130.kim@samsung.com> | |
4 | * Piotr Wilczek <p.wilczek@samsung.com> | |
5 | * | |
6 | * SPDX-License-Identifier: GPL-2.0+ | |
7 | */ | |
8 | ||
9 | #include <common.h> | |
10 | #include <lcd.h> | |
903fd795 | 11 | #include <asm/gpio.h> |
4d6c9671 PW |
12 | #include <asm/arch/pinmux.h> |
13 | #include <asm/arch/power.h> | |
1ecab0f3 | 14 | #include <asm/arch/mipi_dsim.h> |
4d6c9671 PW |
15 | #include <power/pmic.h> |
16 | #include <power/max77686_pmic.h> | |
17 | #include <power/battery.h> | |
18 | #include <power/max77693_pmic.h> | |
19 | #include <power/max77693_muic.h> | |
20 | #include <power/max77693_fg.h> | |
21 | #include <libtizen.h> | |
22 | #include <errno.h> | |
ab8efbb2 | 23 | #include <usb.h> |
5d5716ee | 24 | #include <usb/dwc2_udc.h> |
ab8efbb2 | 25 | #include <usb_mass_storage.h> |
4d6c9671 PW |
26 | |
27 | DECLARE_GLOBAL_DATA_PTR; | |
28 | ||
4d6c9671 PW |
29 | static unsigned int board_rev = -1; |
30 | ||
31 | static inline u32 get_model_rev(void); | |
32 | ||
33 | static void check_hw_revision(void) | |
34 | { | |
35 | int modelrev = 0; | |
7f196101 | 36 | char str[12]; |
4d6c9671 PW |
37 | int i; |
38 | ||
4d6c9671 PW |
39 | /* |
40 | * GPM1[1:0]: MODEL_REV[1:0] | |
41 | * Don't set as pull-none for these N/C pin. | |
42 | * TRM say that it may cause unexcepted state and leakage current. | |
43 | * and pull-none is only for output function. | |
44 | */ | |
7f196101 SG |
45 | for (i = 0; i < 2; i++) { |
46 | int pin = i + EXYNOS4X12_GPIO_M10; | |
47 | ||
48 | sprintf(str, "model_rev%d", i); | |
49 | gpio_request(pin, str); | |
50 | gpio_cfg_pin(pin, S5P_GPIO_INPUT); | |
51 | } | |
4d6c9671 PW |
52 | |
53 | /* GPM1[5:2]: HW_REV[3:0] */ | |
7f196101 SG |
54 | for (i = 0; i < 4; i++) { |
55 | int pin = i + EXYNOS4X12_GPIO_M12; | |
56 | ||
57 | sprintf(str, "hw_rev%d", i); | |
58 | gpio_request(pin, str); | |
59 | gpio_cfg_pin(pin, S5P_GPIO_INPUT); | |
60 | gpio_set_pull(pin, S5P_GPIO_PULL_NONE); | |
4d6c9671 PW |
61 | } |
62 | ||
63 | /* GPM1[1:0]: MODEL_REV[1:0] */ | |
64 | for (i = 0; i < 2; i++) | |
f6ae1ca0 | 65 | modelrev |= (gpio_get_value(EXYNOS4X12_GPIO_M10 + i) << i); |
4d6c9671 PW |
66 | |
67 | /* board_rev[15:8] = model */ | |
68 | board_rev = modelrev << 8; | |
69 | } | |
70 | ||
4d6c9671 PW |
71 | u32 get_board_rev(void) |
72 | { | |
73 | return board_rev; | |
74 | } | |
75 | ||
76 | static inline u32 get_model_rev(void) | |
77 | { | |
78 | return (board_rev >> 8) & 0xff; | |
79 | } | |
80 | ||
81 | static void board_external_gpio_init(void) | |
82 | { | |
4d6c9671 PW |
83 | /* |
84 | * some pins which in alive block are connected with external pull-up | |
85 | * but it's default setting is pull-down. | |
86 | * if that pin set as input then that floated | |
87 | */ | |
88 | ||
f6ae1ca0 AS |
89 | gpio_set_pull(EXYNOS4X12_GPIO_X02, S5P_GPIO_PULL_NONE); /* PS_ALS_INT */ |
90 | gpio_set_pull(EXYNOS4X12_GPIO_X04, S5P_GPIO_PULL_NONE); /* TSP_nINT */ | |
91 | gpio_set_pull(EXYNOS4X12_GPIO_X07, S5P_GPIO_PULL_NONE); /* AP_PMIC_IRQ*/ | |
92 | gpio_set_pull(EXYNOS4X12_GPIO_X15, S5P_GPIO_PULL_NONE); /* IF_PMIC_IRQ*/ | |
93 | gpio_set_pull(EXYNOS4X12_GPIO_X20, S5P_GPIO_PULL_NONE); /* VOL_UP */ | |
94 | gpio_set_pull(EXYNOS4X12_GPIO_X21, S5P_GPIO_PULL_NONE); /* VOL_DOWN */ | |
95 | gpio_set_pull(EXYNOS4X12_GPIO_X23, S5P_GPIO_PULL_NONE); /* FUEL_ALERT */ | |
96 | gpio_set_pull(EXYNOS4X12_GPIO_X24, S5P_GPIO_PULL_NONE); /* ADC_INT */ | |
97 | gpio_set_pull(EXYNOS4X12_GPIO_X27, S5P_GPIO_PULL_NONE); /* nPOWER */ | |
98 | gpio_set_pull(EXYNOS4X12_GPIO_X30, S5P_GPIO_PULL_NONE); /* WPC_INT */ | |
99 | gpio_set_pull(EXYNOS4X12_GPIO_X35, S5P_GPIO_PULL_NONE); /* OK_KEY */ | |
100 | gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */ | |
4d6c9671 PW |
101 | } |
102 | ||
2d8f1e27 PW |
103 | #ifdef CONFIG_SYS_I2C_SOFT |
104 | int get_soft_i2c_scl_pin(void) | |
105 | { | |
106 | if (I2C_ADAP_HWNR) | |
f6ae1ca0 | 107 | return EXYNOS4X12_GPIO_M21; /* I2C9 */ |
2d8f1e27 | 108 | else |
f6ae1ca0 | 109 | return EXYNOS4X12_GPIO_F14; /* I2C8 */ |
2d8f1e27 PW |
110 | } |
111 | ||
112 | int get_soft_i2c_sda_pin(void) | |
113 | { | |
114 | if (I2C_ADAP_HWNR) | |
f6ae1ca0 | 115 | return EXYNOS4X12_GPIO_M20; /* I2C9 */ |
2d8f1e27 | 116 | else |
f6ae1ca0 | 117 | return EXYNOS4X12_GPIO_F15; /* I2C8 */ |
2d8f1e27 PW |
118 | } |
119 | #endif | |
120 | ||
1ecab0f3 | 121 | int exynos_early_init_f(void) |
4d6c9671 | 122 | { |
4d6c9671 PW |
123 | board_external_gpio_init(); |
124 | ||
4d6c9671 PW |
125 | return 0; |
126 | } | |
127 | ||
1ecab0f3 | 128 | int exynos_init(void) |
4d6c9671 | 129 | { |
24542528 ŁM |
130 | struct exynos4_power *pwr = |
131 | (struct exynos4_power *)samsung_get_base_power(); | |
132 | ||
1ecab0f3 PW |
133 | check_hw_revision(); |
134 | printf("HW Revision:\t0x%04x\n", board_rev); | |
4d6c9671 | 135 | |
24542528 ŁM |
136 | /* |
137 | * First bootloader on the TRATS2 platform uses | |
138 | * INFORM4 and INFORM5 registers for recovery | |
139 | * | |
140 | * To indicate correct boot chain - those two | |
141 | * registers must be cleared out | |
142 | */ | |
143 | writel(0, &pwr->inform4); | |
144 | writel(0, &pwr->inform5); | |
145 | ||
4d6c9671 PW |
146 | return 0; |
147 | } | |
148 | ||
1ecab0f3 | 149 | int exynos_power_init(void) |
4d6c9671 | 150 | { |
fc47cf9d | 151 | #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ |
4d6c9671 PW |
152 | int chrg; |
153 | struct power_battery *pb; | |
154 | struct pmic *p_chrg, *p_muic, *p_fg, *p_bat; | |
155 | ||
2d8f1e27 | 156 | pmic_init(I2C_7); /* I2C adapter 7 - bus name s3c24x0_7 */ |
4d6c9671 | 157 | pmic_init_max77686(); |
ef23b996 PW |
158 | pmic_init_max77693(I2C_10); /* I2C adapter 10 - bus name soft1 */ |
159 | power_muic_init(I2C_10); /* I2C adapter 10 - bus name soft1 */ | |
160 | power_fg_init(I2C_9); /* I2C adapter 9 - bus name soft0 */ | |
4d6c9671 PW |
161 | power_bat_init(0); |
162 | ||
163 | p_chrg = pmic_get("MAX77693_PMIC"); | |
164 | if (!p_chrg) { | |
165 | puts("MAX77693_PMIC: Not found\n"); | |
166 | return -ENODEV; | |
167 | } | |
168 | ||
169 | p_muic = pmic_get("MAX77693_MUIC"); | |
170 | if (!p_muic) { | |
171 | puts("MAX77693_MUIC: Not found\n"); | |
172 | return -ENODEV; | |
173 | } | |
174 | ||
175 | p_fg = pmic_get("MAX77693_FG"); | |
176 | if (!p_fg) { | |
177 | puts("MAX17042_FG: Not found\n"); | |
178 | return -ENODEV; | |
179 | } | |
180 | ||
181 | if (p_chrg->chrg->chrg_bat_present(p_chrg) == 0) | |
182 | puts("No battery detected\n"); | |
183 | ||
184 | p_bat = pmic_get("BAT_TRATS2"); | |
185 | if (!p_bat) { | |
186 | puts("BAT_TRATS2: Not found\n"); | |
187 | return -ENODEV; | |
188 | } | |
189 | ||
190 | p_fg->parent = p_bat; | |
191 | p_chrg->parent = p_bat; | |
192 | p_muic->parent = p_bat; | |
193 | ||
194 | p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic); | |
195 | ||
196 | pb = p_bat->pbat; | |
197 | chrg = p_muic->chrg->chrg_type(p_muic); | |
198 | debug("CHARGER TYPE: %d\n", chrg); | |
199 | ||
200 | if (!p_chrg->chrg->chrg_bat_present(p_chrg)) { | |
201 | puts("No battery detected\n"); | |
4a188365 | 202 | return 0; |
4d6c9671 PW |
203 | } |
204 | ||
205 | p_fg->fg->fg_battery_check(p_fg, p_bat); | |
206 | ||
207 | if (pb->bat->state == CHARGE && chrg == CHARGER_USB) | |
208 | puts("CHARGE Battery !\n"); | |
fc47cf9d | 209 | #endif |
4d6c9671 PW |
210 | return 0; |
211 | } | |
212 | ||
ab8efbb2 PW |
213 | #ifdef CONFIG_USB_GADGET |
214 | static int s5pc210_phy_control(int on) | |
215 | { | |
fc47cf9d | 216 | #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ |
ab8efbb2 PW |
217 | int ret = 0; |
218 | unsigned int val; | |
219 | struct pmic *p, *p_pmic, *p_muic; | |
220 | ||
221 | p_pmic = pmic_get("MAX77686_PMIC"); | |
222 | if (!p_pmic) | |
223 | return -ENODEV; | |
224 | ||
225 | if (pmic_probe(p_pmic)) | |
226 | return -1; | |
227 | ||
228 | p_muic = pmic_get("MAX77693_MUIC"); | |
229 | if (!p_muic) | |
230 | return -ENODEV; | |
231 | ||
232 | if (pmic_probe(p_muic)) | |
233 | return -1; | |
234 | ||
235 | if (on) { | |
236 | ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON); | |
237 | if (ret) | |
238 | return -1; | |
239 | ||
240 | p = pmic_get("MAX77693_PMIC"); | |
241 | if (!p) | |
242 | return -ENODEV; | |
243 | ||
244 | if (pmic_probe(p)) | |
245 | return -1; | |
246 | ||
247 | /* SAFEOUT */ | |
248 | ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val); | |
249 | if (ret) | |
250 | return -1; | |
251 | ||
252 | val |= MAX77693_ENSAFEOUT1; | |
253 | ret = pmic_reg_write(p, MAX77693_SAFEOUT, val); | |
254 | if (ret) | |
255 | return -1; | |
256 | ||
257 | /* PATH: USB */ | |
258 | ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, | |
259 | MAX77693_MUIC_CTRL1_DN1DP2); | |
260 | ||
261 | } else { | |
262 | ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM); | |
263 | if (ret) | |
264 | return -1; | |
265 | ||
266 | /* PATH: UART */ | |
267 | ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, | |
268 | MAX77693_MUIC_CTRL1_UT1UR2); | |
269 | } | |
270 | ||
271 | if (ret) | |
272 | return -1; | |
fc47cf9d | 273 | #endif |
ab8efbb2 PW |
274 | return 0; |
275 | } | |
276 | ||
c0982871 | 277 | struct dwc2_plat_otg_data s5pc210_otg_data = { |
ab8efbb2 PW |
278 | .phy_control = s5pc210_phy_control, |
279 | .regs_phy = EXYNOS4X12_USBPHY_BASE, | |
280 | .regs_otg = EXYNOS4X12_USBOTG_BASE, | |
281 | .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, | |
282 | .usb_flags = PHY0_SLEEP, | |
283 | }; | |
284 | ||
285 | int board_usb_init(int index, enum usb_init_type init) | |
286 | { | |
287 | debug("USB_udc_probe\n"); | |
a4bb9b36 | 288 | return dwc2_udc_probe(&s5pc210_otg_data); |
ab8efbb2 PW |
289 | } |
290 | ||
75504e95 | 291 | int g_dnl_board_usb_cable_connected(void) |
ab8efbb2 | 292 | { |
fc47cf9d | 293 | #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ |
ab8efbb2 PW |
294 | struct pmic *muic = pmic_get("MAX77693_MUIC"); |
295 | if (!muic) | |
296 | return 0; | |
297 | ||
298 | return !!muic->chrg->chrg_type(muic); | |
fc47cf9d SG |
299 | #else |
300 | return false; | |
301 | #endif | |
ab8efbb2 PW |
302 | } |
303 | #endif | |
ab8efbb2 | 304 | |
fc47cf9d | 305 | #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ |
4d6c9671 PW |
306 | static int pmic_init_max77686(void) |
307 | { | |
308 | struct pmic *p = pmic_get("MAX77686_PMIC"); | |
309 | ||
310 | if (pmic_probe(p)) | |
311 | return -1; | |
312 | ||
313 | /* BUCK/LDO Output Voltage */ | |
314 | max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 VTF_2.8V */ | |
315 | max77686_set_ldo_voltage(p, 23, 3300000); /* LDO23 TSP_AVDD_3.3V*/ | |
316 | max77686_set_ldo_voltage(p, 24, 1800000); /* LDO24 TSP_VDD_1.8V */ | |
317 | ||
318 | /* BUCK/LDO Output Mode */ | |
319 | max77686_set_buck_mode(p, 1, OPMODE_STANDBY); /* BUCK1 VMIF_1.1V_AP */ | |
320 | max77686_set_buck_mode(p, 2, OPMODE_ON); /* BUCK2 VARM_1.0V_AP */ | |
321 | max77686_set_buck_mode(p, 3, OPMODE_ON); /* BUCK3 VINT_1.0V_AP */ | |
322 | max77686_set_buck_mode(p, 4, OPMODE_ON); /* BUCK4 VG3D_1.0V_AP */ | |
323 | max77686_set_buck_mode(p, 5, OPMODE_ON); /* BUCK5 VMEM_1.2V_AP */ | |
324 | max77686_set_buck_mode(p, 6, OPMODE_ON); /* BUCK6 VCC_SUB_1.35V*/ | |
325 | max77686_set_buck_mode(p, 7, OPMODE_ON); /* BUCK7 VCC_SUB_2.0V */ | |
326 | max77686_set_buck_mode(p, 8, OPMODE_OFF); /* VMEM_VDDF_2.85V */ | |
327 | max77686_set_buck_mode(p, 9, OPMODE_OFF); /* CAM_ISP_CORE_1.2V*/ | |
328 | ||
329 | max77686_set_ldo_mode(p, 1, OPMODE_LPM); /* LDO1 VALIVE_1.0V_AP*/ | |
330 | max77686_set_ldo_mode(p, 2, OPMODE_STANDBY); /* LDO2 VM1M2_1.2V_AP */ | |
331 | max77686_set_ldo_mode(p, 3, OPMODE_LPM); /* LDO3 VCC_1.8V_AP */ | |
332 | max77686_set_ldo_mode(p, 4, OPMODE_LPM); /* LDO4 VCC_2.8V_AP */ | |
333 | max77686_set_ldo_mode(p, 5, OPMODE_OFF); /* LDO5_VCC_1.8V_IO */ | |
334 | max77686_set_ldo_mode(p, 6, OPMODE_STANDBY); /* LDO6 VMPLL_1.0V_AP */ | |
335 | max77686_set_ldo_mode(p, 7, OPMODE_STANDBY); /* LDO7 VPLL_1.0V_AP */ | |
336 | max77686_set_ldo_mode(p, 8, OPMODE_LPM); /* LDO8 VMIPI_1.0V_AP */ | |
337 | max77686_set_ldo_mode(p, 9, OPMODE_OFF); /* CAM_ISP_MIPI_1.2*/ | |
338 | max77686_set_ldo_mode(p, 10, OPMODE_LPM); /* LDO10 VMIPI_1.8V_AP*/ | |
339 | max77686_set_ldo_mode(p, 11, OPMODE_STANDBY); /* LDO11 VABB1_1.8V_AP*/ | |
340 | max77686_set_ldo_mode(p, 12, OPMODE_LPM); /* LDO12 VUOTG_3.0V_AP*/ | |
341 | max77686_set_ldo_mode(p, 13, OPMODE_OFF); /* LDO13 VC2C_1.8V_AP */ | |
342 | max77686_set_ldo_mode(p, 14, OPMODE_STANDBY); /* VABB02_1.8V_AP */ | |
343 | max77686_set_ldo_mode(p, 15, OPMODE_STANDBY); /* LDO15 VHSIC_1.0V_AP*/ | |
344 | max77686_set_ldo_mode(p, 16, OPMODE_STANDBY); /* LDO16 VHSIC_1.8V_AP*/ | |
345 | max77686_set_ldo_mode(p, 17, OPMODE_OFF); /* CAM_SENSOR_CORE_1.2*/ | |
346 | max77686_set_ldo_mode(p, 18, OPMODE_OFF); /* CAM_ISP_SEN_IO_1.8V*/ | |
347 | max77686_set_ldo_mode(p, 19, OPMODE_OFF); /* LDO19 VT_CAM_1.8V */ | |
348 | max77686_set_ldo_mode(p, 20, OPMODE_ON); /* LDO20 VDDQ_PRE_1.8V*/ | |
349 | max77686_set_ldo_mode(p, 21, OPMODE_OFF); /* LDO21 VTF_2.8V */ | |
350 | max77686_set_ldo_mode(p, 22, OPMODE_OFF); /* LDO22 VMEM_VDD_2.8V*/ | |
351 | max77686_set_ldo_mode(p, 23, OPMODE_OFF); /* LDO23 TSP_AVDD_3.3V*/ | |
352 | max77686_set_ldo_mode(p, 24, OPMODE_OFF); /* LDO24 TSP_VDD_1.8V */ | |
353 | max77686_set_ldo_mode(p, 25, OPMODE_OFF); /* LDO25 VCC_3.3V_LCD */ | |
354 | max77686_set_ldo_mode(p, 26, OPMODE_OFF); /*LDO26 VCC_3.0V_MOTOR*/ | |
355 | ||
356 | return 0; | |
357 | } | |
fc47cf9d | 358 | #endif |
4d6c9671 PW |
359 | |
360 | /* | |
361 | * LCD | |
362 | */ | |
363 | ||
364 | #ifdef CONFIG_LCD | |
1ecab0f3 | 365 | int mipi_power(void) |
4d6c9671 | 366 | { |
fc47cf9d | 367 | #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ |
4d6c9671 PW |
368 | struct pmic *p = pmic_get("MAX77686_PMIC"); |
369 | ||
370 | /* LDO8 VMIPI_1.0V_AP */ | |
371 | max77686_set_ldo_mode(p, 8, OPMODE_ON); | |
372 | /* LDO10 VMIPI_1.8V_AP */ | |
373 | max77686_set_ldo_mode(p, 10, OPMODE_ON); | |
fc47cf9d | 374 | #endif |
4d6c9671 PW |
375 | |
376 | return 0; | |
377 | } | |
378 | ||
379 | void exynos_lcd_power_on(void) | |
380 | { | |
fc47cf9d | 381 | #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ |
4d6c9671 PW |
382 | struct pmic *p = pmic_get("MAX77686_PMIC"); |
383 | ||
4d6c9671 | 384 | /* LCD_2.2V_EN: GPC0[1] */ |
7f196101 | 385 | gpio_request(EXYNOS4X12_GPIO_C01, "lcd_2v2_en"); |
f6ae1ca0 AS |
386 | gpio_set_pull(EXYNOS4X12_GPIO_C01, S5P_GPIO_PULL_UP); |
387 | gpio_direction_output(EXYNOS4X12_GPIO_C01, 1); | |
4d6c9671 PW |
388 | |
389 | /* LDO25 VCC_3.1V_LCD */ | |
390 | pmic_probe(p); | |
391 | max77686_set_ldo_voltage(p, 25, 3100000); | |
392 | max77686_set_ldo_mode(p, 25, OPMODE_LPM); | |
fc47cf9d | 393 | #endif |
4d6c9671 PW |
394 | } |
395 | ||
396 | void exynos_reset_lcd(void) | |
397 | { | |
4d6c9671 | 398 | /* reset lcd */ |
7f196101 | 399 | gpio_request(EXYNOS4X12_GPIO_F21, "lcd_reset"); |
f6ae1ca0 | 400 | gpio_direction_output(EXYNOS4X12_GPIO_F21, 0); |
4d6c9671 | 401 | udelay(10); |
f6ae1ca0 | 402 | gpio_set_value(EXYNOS4X12_GPIO_F21, 1); |
4d6c9671 PW |
403 | } |
404 | ||
1ecab0f3 | 405 | void exynos_lcd_misc_init(vidinfo_t *vid) |
4d6c9671 | 406 | { |
4d6c9671 PW |
407 | #ifdef CONFIG_TIZEN |
408 | get_tizen_logo_info(vid); | |
409 | #endif | |
1ecab0f3 | 410 | #ifdef CONFIG_S6E8AX0 |
4d6c9671 | 411 | s6e8ax0_init(); |
f64236a9 | 412 | #endif |
4d6c9671 | 413 | } |
1ecab0f3 | 414 | #endif /* LCD */ |