[people/ms/u-boot.git] / board / tqc / tqm834x / tqm834x.c

/*
 * (C) Copyright 2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
#include <miiphy.h>
#include <asm/mmu.h>
#include <pci.h>
#include <flash.h>
#include <mtd/cfi_flash.h>

DECLARE_GLOBAL_DATA_PTR;

#define IOSYNC			asm("eieio")
#define ISYNC			asm("isync")
#define SYNC			asm("sync")
#define FPW			FLASH_PORT_WIDTH
#define FPWV			FLASH_PORT_WIDTHV

#define DDR_MAX_SIZE_PER_CS	0x20000000

#if defined(DDR_CASLAT_20)
#define TIMING_CASLAT		TIMING_CFG1_CASLAT_20
#define MODE_CASLAT		DDR_MODE_CASLAT_20
#else
#define TIMING_CASLAT		TIMING_CFG1_CASLAT_25
#define MODE_CASLAT		DDR_MODE_CASLAT_25
#endif

#define INITIAL_CS_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_12 | \
				CSCONFIG_COL_BIT_9)

/* External definitions */
ulong flash_get_size (ulong base, int banknum);

/* Local functions */
static int detect_num_flash_banks(void);
static long int get_ddr_bank_size(short cs, long *base);
static void set_cs_bounds(short cs, ulong base, ulong size);
static void set_cs_config(short cs, long config);
static void set_ddr_config(void);

/* Local variable */
static volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;

/**************************************************************************
 * Board initialzation after relocation to RAM. Used to detect the number
 * of Flash banks on TQM834x.
 */
int board_early_init_r (void) {
	/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
		return 0;

	/* detect the number of Flash banks */
	return detect_num_flash_banks();
}

/**************************************************************************
 * DRAM initalization and size detection
 */
int initdram(void)
{
	long bank_size;
	long size;
	int cs;

	/* during size detection, set up the max DDRLAW size */
	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE;
	im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);

	/* set CS bounds to maximum size */
	for(cs = 0; cs < 4; ++cs) {
		set_cs_bounds(cs,
			CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
			DDR_MAX_SIZE_PER_CS);

		set_cs_config(cs, INITIAL_CS_CONFIG);
	}

	/* configure ddr controller */
	set_ddr_config();

	udelay(200);

	/* enable DDR controller */
	im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
		SDRAM_CFG_SREN |
		SDRAM_CFG_SDRAM_TYPE_DDR1);
	SYNC;

	/* size detection */
	debug("\n");
	size = 0;
	for(cs = 0; cs < 4; ++cs) {
		debug("\nDetecting Bank%d\n", cs);

		bank_size = get_ddr_bank_size(cs,
			(long *)(CONFIG_SYS_DDR_BASE + size));
		size += bank_size;

		debug("DDR Bank%d size: %ld MiB\n\n", cs, bank_size >> 20);

		/* exit if less than one bank */
		if(size < DDR_MAX_SIZE_PER_CS) break;
	}

	gd->ram_size = size;

	return 0;
}

/**************************************************************************
 * checkboard()
 */
int checkboard (void)
{
	puts("Board: TQM834x\n");

#ifdef CONFIG_PCI
	volatile immap_t * immr;
	u32 w, f;

	immr = (immap_t *)CONFIG_SYS_IMMR;
	if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
		printf("PCI:   NOT in host mode..?!\n");
		return 0;
	}

	/* get bus width */
	w = 32;
	if (immr->reset.rcwh & HRCWH_64_BIT_PCI)
		w = 64;

	/* get clock */
	f = gd->pci_clk;

	printf("PCI1:  %d bit, %d MHz\n", w, f / 1000000);
#else
	printf("PCI:   disabled\n");
#endif
	return 0;
}


/**************************************************************************
 *
 * Local functions
 *
 *************************************************************************/

/**************************************************************************
 * Detect the number of flash banks (1 or 2). Store it in
 * a global variable tqm834x_num_flash_banks.
 * Bank detection code based on the Monitor code.
 */
static int detect_num_flash_banks(void)
{
	typedef unsigned long FLASH_PORT_WIDTH;
	typedef volatile unsigned long FLASH_PORT_WIDTHV;
	FPWV *bank1_base;
	FPWV *bank2_base;
	FPW bank1_read;
	FPW bank2_read;
	ulong bank1_size;
	ulong bank2_size;
	ulong total_size;

	cfi_flash_num_flash_banks = 2;	/* assume two banks */

	/* Get bank 1 and 2 information */
	bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0);
	debug("Bank1 size: %lu\n", bank1_size);
	bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1);
	debug("Bank2 size: %lu\n", bank2_size);
	total_size = bank1_size + bank2_size;

	if (bank2_size > 0) {
		/* Seems like we've got bank 2, but maybe it's mirrored 1 */

		/* Set the base addresses */
		bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
		bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size);

		/* Put bank 2 into CFI command mode and read */
		bank2_base[0x55] = 0x00980098;
		IOSYNC;
		ISYNC;
		bank2_read = bank2_base[0x10];

		/* Read from bank 1 (it's in read mode) */
		bank1_read = bank1_base[0x10];

		/* Reset Flash */
		bank1_base[0] = 0x00F000F0;
		bank2_base[0] = 0x00F000F0;

		if (bank2_read == bank1_read) {
			/*
			 * Looks like just one bank, but not sure yet. Let's
			 * read from bank 2 in autosoelect mode.
			 */
			bank2_base[0x0555] = 0x00AA00AA;
			bank2_base[0x02AA] = 0x00550055;
			bank2_base[0x0555] = 0x00900090;
			IOSYNC;
			ISYNC;
			bank2_read = bank2_base[0x10];

			/* Read from bank 1 (it's in read mode) */
			bank1_read = bank1_base[0x10];

			/* Reset Flash */
			bank1_base[0] = 0x00F000F0;
			bank2_base[0] = 0x00F000F0;

			if (bank2_read == bank1_read) {
				/*
				 * In both CFI command and autoselect modes,
				 * we got the some data reading from Flash.
				 * There is only one mirrored bank.
				 */
				cfi_flash_num_flash_banks = 1;
				total_size = bank1_size;
			}
		}
	}

	debug("Number of flash banks detected: %d\n", cfi_flash_num_flash_banks);

	/* set OR0 and BR0 */
	set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH |
		   (-(total_size) & OR_GPCM_AM));
	set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) |
		   (BR_MS_GPCM | BR_PS_32 | BR_V));

	return (0);
}

/*************************************************************************
 * Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
 */
static long int get_ddr_bank_size(short cs, long *base)
{
	/* This array lists all valid DDR SDRAM configurations, with
	 * Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
	 * The last entry has to to have size equal 0 and is igonred during
	 * autodection. Bank sizes must be in increasing order of size
	 */
	struct {
		long row;
		long col;
		long size;
	} conf[] = {
		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_8,	32 << 20},
		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_9,	64 << 20},
		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_10,	128 << 20},
		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_9,	128 << 20},
		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_10,	256 << 20},
		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_11,	512 << 20},
		{CSCONFIG_ROW_BIT_14,	CSCONFIG_COL_BIT_10,	512 << 20},
		{CSCONFIG_ROW_BIT_14,	CSCONFIG_COL_BIT_11,	1024 << 20},
		{0,			0,			0}
	};

	int i;
	int detected;
	long size;

	detected = -1;
	for(i = 0; conf[i].size != 0; ++i) {

		/* set sdram bank configuration */
		set_cs_config(cs, CSCONFIG_EN | conf[i].col | conf[i].row);

		debug("Getting RAM size...\n");
		size = get_ram_size(base, DDR_MAX_SIZE_PER_CS);

		if((size == conf[i].size) && (i == detected + 1))
			detected = i;

		debug("Trying %ld x %ld (%ld MiB) at addr %p, detected: %ld MiB\n",
			conf[i].row,
			conf[i].col,
			conf[i].size >> 20,
			base,
			size >> 20);
	}

	if(detected == -1){
		/* disable empty cs */
		debug("\nNo valid configurations for CS%d, disabling...\n", cs);
		set_cs_config(cs, 0);
		return 0;
	}

	debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
			conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);

	/* configure cs ro detected params */
	set_cs_config(cs, CSCONFIG_EN | conf[detected].row |
			conf[detected].col);

	set_cs_bounds(cs, (long)base, conf[detected].size);

	return(conf[detected].size);
}

/**************************************************************************
 * Sets DDR bank CS bounds.
 */
static void set_cs_bounds(short cs, ulong base, ulong size)
{
	debug("Setting bounds %08lx, %08lx for cs %d\n", base, size, cs);
	if(size == 0){
		im->ddr.csbnds[cs].csbnds = 0x00000000;
	} else {
		im->ddr.csbnds[cs].csbnds =
			((base >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
			(((base + size - 1) >> CSBNDS_EA_SHIFT) &
				CSBNDS_EA);
	}
	SYNC;
}

/**************************************************************************
 * Sets DDR banks CS configuration.
 * config == 0x00000000 disables the CS.
 */
static void set_cs_config(short cs, long config)
{
	debug("Setting config %08lx for cs %d\n", config, cs);
	im->ddr.cs_config[cs] = config;
	SYNC;
}

/**************************************************************************
 * Sets DDR clocks, timings and configuration.
 */
static void set_ddr_config(void) {
	/* clock control */
	im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN |
		DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
	SYNC;

	/* timing configuration */
	im->ddr.timing_cfg_1 =
		(4 << TIMING_CFG1_PRETOACT_SHIFT) |
		(7 << TIMING_CFG1_ACTTOPRE_SHIFT) |
		(4 << TIMING_CFG1_ACTTORW_SHIFT)  |
		(5 << TIMING_CFG1_REFREC_SHIFT)   |
		(3 << TIMING_CFG1_WRREC_SHIFT)    |
		(3 << TIMING_CFG1_ACTTOACT_SHIFT) |
		(1 << TIMING_CFG1_WRTORD_SHIFT)   |
		(TIMING_CFG1_CASLAT & TIMING_CASLAT);

	im->ddr.timing_cfg_2 =
		TIMING_CFG2_CPO_DEF |
		(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT);
	SYNC;

	/* don't enable DDR controller yet */
	im->ddr.sdram_cfg =
		SDRAM_CFG_SREN |
		SDRAM_CFG_SDRAM_TYPE_DDR1;
	SYNC;

	/* Set SDRAM mode */
	im->ddr.sdram_mode =
		((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) <<
			SDRAM_MODE_ESD_SHIFT) |
		((DDR_MODE_MODEREG | DDR_MODE_BLEN_4) <<
			SDRAM_MODE_SD_SHIFT) |
		((DDR_MODE_CASLAT << SDRAM_MODE_SD_SHIFT) &
			MODE_CASLAT);
	SYNC;

	/* Set fast SDRAM refresh rate */
	im->ddr.sdram_interval =
		(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
		(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
	SYNC;

	/* Workaround for DDR6 Erratum
	 * see MPC8349E Device Errata Rev.8, 2/2006
	 * This workaround influences the MPC internal "input enables"
	 * dependent on CAS latency and MPC revision. According to errata
	 * sheet the internal reserved registers for this workaround are
	 * not available from revision 2.0 and up.
	 */

	/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
	 * (0x200)
	 */
	if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {

		/* There is a internal reserved register at IMMRBAR+0x2F00
		 * which has to be written with a certain value defined by
		 * errata sheet.
		 */
		u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);

#if defined(DDR_CASLAT_20)
		*reserved_p = 0x201c0000;
#else
		*reserved_p = 0x202c0000;
#endif
	}
}

#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
	ft_cpu_setup(blob, bd);

#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif	/* CONFIG_PCI */

	return 0;
}
#endif	/* CONFIG_OF_BOARD_SETUP */
Commit	Line	Data
e6f2e902 MB	1	/*
	2	* (C) Copyright 2005
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
e6f2e902 MB	6	*/
	7
	8	#include <common.h>
	9	#include <ioports.h>
	10	#include <mpc83xx.h>
	11	#include <asm/mpc8349_pci.h>
	12	#include <i2c.h>
e6f2e902	13	#include <miiphy.h>
61f2b38a	14	#include <asm/mmu.h>
e6f2e902	15	#include <pci.h>
ca5def3f SR	16	#include <flash.h>
ca5def3f SR	17	#include <mtd/cfi_flash.h>
e6f2e902	18
d87080b7 WD	19	DECLARE_GLOBAL_DATA_PTR;
d87080b7 WD	20
e6f2e902 MB	21	#define IOSYNC asm("eieio")
	22	#define ISYNC asm("isync")
	23	#define SYNC asm("sync")
	24	#define FPW FLASH_PORT_WIDTH
	25	#define FPWV FLASH_PORT_WIDTHV
	26
	27	#define DDR_MAX_SIZE_PER_CS 0x20000000
	28
	29	#if defined(DDR_CASLAT_20)
	30	#define TIMING_CASLAT TIMING_CFG1_CASLAT_20
	31	#define MODE_CASLAT DDR_MODE_CASLAT_20
	32	#else
	33	#define TIMING_CASLAT TIMING_CFG1_CASLAT_25
	34	#define MODE_CASLAT DDR_MODE_CASLAT_25
	35	#endif
	36
	37	#define INITIAL_CS_CONFIG (CSCONFIG_EN \| CSCONFIG_ROW_BIT_12 \| \
	38	CSCONFIG_COL_BIT_9)
	39
e6f2e902 MB	40	/* External definitions */
e6f2e902 MB	41	ulong flash_get_size (ulong base, int banknum);
e6f2e902 MB	42
	43	/* Local functions */
	44	static int detect_num_flash_banks(void);
982db890	45	static long int get_ddr_bank_size(short cs, long *base);
4019e54d	46	static void set_cs_bounds(short cs, ulong base, ulong size);
e6f2e902 MB	47	static void set_cs_config(short cs, long config);
	48	static void set_ddr_config(void);
	49
	50	/* Local variable */
6d0f6bcf	51	static volatile immap_t im = (immap_t )CONFIG_SYS_IMMR;
e6f2e902 MB	52
	53	/**************************************************************************
	54	* Board initialzation after relocation to RAM. Used to detect the number
	55	* of Flash banks on TQM834x.
	56	*/
	57	int board_early_init_r (void) {
	58	/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
	59	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
	60	return 0;
f013dacf	61
e6f2e902 MB	62	/* detect the number of Flash banks */
	63	return detect_num_flash_banks();
	64	}
	65
	66	/**************************************************************************
	67	* DRAM initalization and size detection
	68	*/
088454cd	69	int initdram(void)
e6f2e902 MB	70	{
	71	long bank_size;
	72	long size;
	73	int cs;
	74
	75	/* during size detection, set up the max DDRLAW size */
6d0f6bcf	76	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE;
e6f2e902 MB	77	im->sysconf.ddrlaw[0].ar = (LAWAR_EN \| LAWAR_SIZE_2G);
	78
	79	/* set CS bounds to maximum size */
	80	for(cs = 0; cs < 4; ++cs) {
	81	set_cs_bounds(cs,
6d0f6bcf	82	CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
e6f2e902 MB	83	DDR_MAX_SIZE_PER_CS);
	84
	85	set_cs_config(cs, INITIAL_CS_CONFIG);
	86	}
	87
	88	/* configure ddr controller */
	89	set_ddr_config();
	90
	91	udelay(200);
f013dacf	92
e6f2e902 MB	93	/* enable DDR controller */
	94	im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN \|
	95	SDRAM_CFG_SREN \|
bbea46f7	96	SDRAM_CFG_SDRAM_TYPE_DDR1);
e6f2e902 MB	97	SYNC;
	98
	99	/* size detection */
	100	debug("\n");
	101	size = 0;
	102	for(cs = 0; cs < 4; ++cs) {
	103	debug("\nDetecting Bank%d\n", cs);
	104
	105	bank_size = get_ddr_bank_size(cs,
982db890	106	(long *)(CONFIG_SYS_DDR_BASE + size));
e6f2e902 MB	107	size += bank_size;
e6f2e902 MB	108
3d54639c	109	debug("DDR Bank%d size: %ld MiB\n\n", cs, bank_size >> 20);
e6f2e902 MB	110
	111	/* exit if less than one bank */
	112	if(size < DDR_MAX_SIZE_PER_CS) break;
	113	}
	114
088454cd SG	115	gd->ram_size = size;
	116
	117	return 0;
e6f2e902 MB	118	}
	119
	120	/**************************************************************************
	121	* checkboard()
	122	*/
	123	int checkboard (void)
	124	{
	125	puts("Board: TQM834x\n");
	126
	127	#ifdef CONFIG_PCI
6902df56 RJ	128	volatile immap_t * immr;
6902df56 RJ	129	u32 w, f;
e6f2e902	130
6d0f6bcf	131	immr = (immap_t *)CONFIG_SYS_IMMR;
e080313c	132	if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
6902df56 RJ	133	printf("PCI: NOT in host mode..?!\n");
	134	return 0;
	135	}
e6f2e902	136
6902df56 RJ	137	/* get bus width */
6902df56 RJ	138	w = 32;
e080313c	139	if (immr->reset.rcwh & HRCWH_64_BIT_PCI)
6902df56	140	w = 64;
e6f2e902	141
6902df56 RJ	142	/* get clock */
6902df56 RJ	143	f = gd->pci_clk;
e6f2e902	144
6902df56 RJ	145	printf("PCI1: %d bit, %d MHz\n", w, f / 1000000);
	146	#else
	147	printf("PCI: disabled\n");
	148	#endif
	149	return 0;
e6f2e902 MB	150	}
e6f2e902 MB	151
6902df56	152
e6f2e902 MB	153	/**************************************************************************
	154	*
	155	* Local functions
	156	*
	157	*************************************************************************/
	158
	159	/**************************************************************************
	160	* Detect the number of flash banks (1 or 2). Store it in
	161	* a global variable tqm834x_num_flash_banks.
	162	* Bank detection code based on the Monitor code.
	163	*/
	164	static int detect_num_flash_banks(void)
	165	{
	166	typedef unsigned long FLASH_PORT_WIDTH;
	167	typedef volatile unsigned long FLASH_PORT_WIDTHV;
	168	FPWV *bank1_base;
	169	FPWV *bank2_base;
	170	FPW bank1_read;
	171	FPW bank2_read;
	172	ulong bank1_size;
	173	ulong bank2_size;
	174	ulong total_size;
	175
ca5def3f	176	cfi_flash_num_flash_banks = 2; /* assume two banks */
f013dacf	177
e6f2e902	178	/* Get bank 1 and 2 information */
6d0f6bcf	179	bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0);
e6f2e902	180	debug("Bank1 size: %lu\n", bank1_size);
6d0f6bcf	181	bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1);
e6f2e902 MB	182	debug("Bank2 size: %lu\n", bank2_size);
	183	total_size = bank1_size + bank2_size;
	184
	185	if (bank2_size > 0) {
	186	/* Seems like we've got bank 2, but maybe it's mirrored 1 */
	187
	188	/* Set the base addresses */
6d0f6bcf JCPV	189	bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
6d0f6bcf JCPV	190	bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size);
e6f2e902 MB	191
	192	/* Put bank 2 into CFI command mode and read */
	193	bank2_base[0x55] = 0x00980098;
	194	IOSYNC;
	195	ISYNC;
	196	bank2_read = bank2_base[0x10];
	197
	198	/* Read from bank 1 (it's in read mode) */
	199	bank1_read = bank1_base[0x10];
	200
	201	/* Reset Flash */
	202	bank1_base[0] = 0x00F000F0;
	203	bank2_base[0] = 0x00F000F0;
	204
	205	if (bank2_read == bank1_read) {
	206	/*
	207	* Looks like just one bank, but not sure yet. Let's
	208	* read from bank 2 in autosoelect mode.
	209	*/
	210	bank2_base[0x0555] = 0x00AA00AA;
	211	bank2_base[0x02AA] = 0x00550055;
	212	bank2_base[0x0555] = 0x00900090;
	213	IOSYNC;
	214	ISYNC;
	215	bank2_read = bank2_base[0x10];
	216
	217	/* Read from bank 1 (it's in read mode) */
	218	bank1_read = bank1_base[0x10];
	219
	220	/* Reset Flash */
	221	bank1_base[0] = 0x00F000F0;
	222	bank2_base[0] = 0x00F000F0;
	223
	224	if (bank2_read == bank1_read) {
	225	/*
	226	* In both CFI command and autoselect modes,
	227	* we got the some data reading from Flash.
	228	* There is only one mirrored bank.
	229	*/
ca5def3f	230	cfi_flash_num_flash_banks = 1;
e6f2e902 MB	231	total_size = bank1_size;
	232	}
	233	}
	234	}
	235
ca5def3f	236	debug("Number of flash banks detected: %d\n", cfi_flash_num_flash_banks);
e6f2e902 MB	237
e6f2e902 MB	238	/* set OR0 and BR0 */
f51cdaf1 BB	239	set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH \|
	240	(-(total_size) & OR_GPCM_AM));
	241	set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) \|
	242	(BR_MS_GPCM \| BR_PS_32 \| BR_V));
e6f2e902 MB	243
	244	return (0);
	245	}
	246
	247	/*************************************************************************
	248	* Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
	249	*/
982db890	250	static long int get_ddr_bank_size(short cs, long *base)
e6f2e902 MB	251	{
	252	/* This array lists all valid DDR SDRAM configurations, with
	253	* Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
	254	* The last entry has to to have size equal 0 and is igonred during
	255	* autodection. Bank sizes must be in increasing order of size
	256	*/
	257	struct {
	258	long row;
	259	long col;
	260	long size;
	261	} conf[] = {
	262	{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_8, 32 << 20},
	263	{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_9, 64 << 20},
	264	{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_10, 128 << 20},
	265	{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_9, 128 << 20},
	266	{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_10, 256 << 20},
	267	{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_11, 512 << 20},
	268	{CSCONFIG_ROW_BIT_14, CSCONFIG_COL_BIT_10, 512 << 20},
	269	{CSCONFIG_ROW_BIT_14, CSCONFIG_COL_BIT_11, 1024 << 20},
	270	{0, 0, 0}
	271	};
	272
	273	int i;
	274	int detected;
	275	long size;
	276
	277	detected = -1;
	278	for(i = 0; conf[i].size != 0; ++i) {
	279
	280	/* set sdram bank configuration */
	281	set_cs_config(cs, CSCONFIG_EN \| conf[i].col \| conf[i].row);
	282
	283	debug("Getting RAM size...\n");
	284	size = get_ram_size(base, DDR_MAX_SIZE_PER_CS);
	285
	286	if((size == conf[i].size) && (i == detected + 1))
	287	detected = i;
	288
	289	debug("Trying %ld x %ld (%ld MiB) at addr %p, detected: %ld MiB\n",
	290	conf[i].row,
	291	conf[i].col,
	292	conf[i].size >> 20,
	293	base,
	294	size >> 20);
	295	}
	296
	297	if(detected == -1){
	298	/* disable empty cs */
	299	debug("\nNo valid configurations for CS%d, disabling...\n", cs);
	300	set_cs_config(cs, 0);
	301	return 0;
	302	}
f013dacf	303
e6f2e902 MB	304	debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
e6f2e902 MB	305	conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);
f013dacf	306
e6f2e902 MB	307	/* configure cs ro detected params */
	308	set_cs_config(cs, CSCONFIG_EN \| conf[detected].row \|
	309	conf[detected].col);
	310
	311	set_cs_bounds(cs, (long)base, conf[detected].size);
	312
	313	return(conf[detected].size);
	314	}
	315
	316	/**************************************************************************
	317	* Sets DDR bank CS bounds.
	318	*/
4019e54d	319	static void set_cs_bounds(short cs, ulong base, ulong size)
e6f2e902	320	{
3d54639c	321	debug("Setting bounds %08lx, %08lx for cs %d\n", base, size, cs);
e6f2e902 MB	322	if(size == 0){
	323	im->ddr.csbnds[cs].csbnds = 0x00000000;
	324	} else {
	325	im->ddr.csbnds[cs].csbnds =
	326	((base >> CSBNDS_SA_SHIFT) & CSBNDS_SA) \|
	327	(((base + size - 1) >> CSBNDS_EA_SHIFT) &
	328	CSBNDS_EA);
	329	}
	330	SYNC;
	331	}
	332
	333	/**************************************************************************
	334	* Sets DDR banks CS configuration.
	335	* config == 0x00000000 disables the CS.
	336	*/
	337	static void set_cs_config(short cs, long config)
	338	{
3d54639c	339	debug("Setting config %08lx for cs %d\n", config, cs);
e6f2e902 MB	340	im->ddr.cs_config[cs] = config;
	341	SYNC;
	342	}
	343
	344	/**************************************************************************
	345	* Sets DDR clocks, timings and configuration.
	346	*/
	347	static void set_ddr_config(void) {
	348	/* clock control */
	349	im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN \|
	350	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
	351	SYNC;
f013dacf	352
e6f2e902 MB	353	/* timing configuration */
	354	im->ddr.timing_cfg_1 =
	355	(4 << TIMING_CFG1_PRETOACT_SHIFT) \|
	356	(7 << TIMING_CFG1_ACTTOPRE_SHIFT) \|
	357	(4 << TIMING_CFG1_ACTTORW_SHIFT) \|
	358	(5 << TIMING_CFG1_REFREC_SHIFT) \|
	359	(3 << TIMING_CFG1_WRREC_SHIFT) \|
	360	(3 << TIMING_CFG1_ACTTOACT_SHIFT) \|
	361	(1 << TIMING_CFG1_WRTORD_SHIFT) \|
	362	(TIMING_CFG1_CASLAT & TIMING_CASLAT);
	363
	364	im->ddr.timing_cfg_2 =
	365	TIMING_CFG2_CPO_DEF \|
	366	(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT);
	367	SYNC;
	368
	369	/* don't enable DDR controller yet */
	370	im->ddr.sdram_cfg =
	371	SDRAM_CFG_SREN \|
bbea46f7	372	SDRAM_CFG_SDRAM_TYPE_DDR1;
e6f2e902	373	SYNC;
f013dacf	374
e6f2e902 MB	375	/* Set SDRAM mode */
	376	im->ddr.sdram_mode =
	377	((DDR_MODE_EXT_MODEREG \| DDR_MODE_WEAK) <<
	378	SDRAM_MODE_ESD_SHIFT) \|
	379	((DDR_MODE_MODEREG \| DDR_MODE_BLEN_4) <<
	380	SDRAM_MODE_SD_SHIFT) \|
	381	((DDR_MODE_CASLAT << SDRAM_MODE_SD_SHIFT) &
	382	MODE_CASLAT);
	383	SYNC;
	384
	385	/* Set fast SDRAM refresh rate */
	386	im->ddr.sdram_interval =
	387	(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) \|
	388	(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
	389	SYNC;
10af6d53 WD	390
	391	/* Workaround for DDR6 Erratum
	392	* see MPC8349E Device Errata Rev.8, 2/2006
	393	* This workaround influences the MPC internal "input enables"
	394	* dependent on CAS latency and MPC revision. According to errata
	395	* sheet the internal reserved registers for this workaround are
	396	* not available from revision 2.0 and up.
	397	*/
	398
	399	/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
	400	* (0x200)
	401	*/
	402	if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
	403
	404	/* There is a internal reserved register at IMMRBAR+0x2F00
	405	* which has to be written with a certain value defined by
	406	* errata sheet.
	407	*/
966083e9 WD	408	u32 reserved_p = (u32 )((u8 *)im + 0x2f00);
966083e9 WD	409
10af6d53	410	#if defined(DDR_CASLAT_20)
966083e9	411	*reserved_p = 0x201c0000;
10af6d53	412	#else
966083e9	413	*reserved_p = 0x202c0000;
10af6d53 WD	414	#endif
10af6d53 WD	415	}
e6f2e902	416	}
4681e673 WD	417
4681e673 WD	418	#ifdef CONFIG_OF_BOARD_SETUP
e895a4b0	419	int ft_board_setup(void blob, bd_t bd)
4681e673 WD	420	{
	421	ft_cpu_setup(blob, bd);
	422
	423	#ifdef CONFIG_PCI
	424	ft_pci_setup(blob, bd);
	425	#endif /* CONFIG_PCI */
e895a4b0 SG	426
e895a4b0 SG	427	return 0;
4681e673 WD	428	}
4681e673 WD	429	#endif /* CONFIG_OF_BOARD_SETUP */