]>
Commit | Line | Data |
---|---|---|
72a8cf8d SG |
1 | menu "Command line interface" |
2 | ||
302a6487 SG |
3 | config CMDLINE |
4 | bool "Support U-Boot commands" | |
5 | default y | |
6 | help | |
7 | Enable U-Boot's command-line functions. This provides a means | |
8 | to enter commands into U-Boot for a wide variety of purposes. It | |
9 | also allows scripts (containing commands) to be executed. | |
10 | Various commands and command categorys can be indivdually enabled. | |
11 | Depending on the number of commands enabled, this can add | |
12 | substantially to the size of U-Boot. | |
13 | ||
72a8cf8d SG |
14 | config HUSH_PARSER |
15 | bool "Use hush shell" | |
16 | select SYS_HUSH_PARSER | |
302a6487 | 17 | depends on CMDLINE |
72a8cf8d SG |
18 | help |
19 | This option enables the "hush" shell (from Busybox) as command line | |
20 | interpreter, thus enabling powerful command line syntax like | |
21 | if...then...else...fi conditionals or `&&' and '||' | |
22 | constructs ("shell scripts"). | |
23 | ||
24 | If disabled, you get the old, much simpler behaviour with a somewhat | |
25 | smaller memory footprint. | |
26 | ||
27 | config SYS_HUSH_PARSER | |
28 | bool | |
29 | help | |
30 | Backward compatibility. | |
31 | ||
32 | config SYS_PROMPT | |
33 | string "Shell prompt" | |
34 | default "=> " | |
35 | help | |
36 | This string is displayed in the command line to the left of the | |
37 | cursor. | |
38 | ||
39 | menu "Autoboot options" | |
40 | ||
41 | config AUTOBOOT_KEYED | |
42 | bool "Stop autobooting via specific input key / string" | |
43 | default n | |
44 | help | |
45 | This option enables stopping (aborting) of the automatic | |
46 | boot feature only by issuing a specific input key or | |
47 | string. If not enabled, any input key will abort the | |
48 | U-Boot automatic booting process and bring the device | |
49 | to the U-Boot prompt for user input. | |
50 | ||
51 | config AUTOBOOT_PROMPT | |
52 | string "Autoboot stop prompt" | |
53 | depends on AUTOBOOT_KEYED | |
54 | default "Autoboot in %d seconds\\n" | |
55 | help | |
56 | This string is displayed before the boot delay selected by | |
57 | CONFIG_BOOTDELAY starts. If it is not defined there is no | |
58 | output indicating that autoboot is in progress. | |
59 | ||
60 | Note that this define is used as the (only) argument to a | |
61 | printf() call, so it may contain '%' format specifications, | |
62 | provided that it also includes, sepearated by commas exactly | |
63 | like in a printf statement, the required arguments. It is | |
64 | the responsibility of the user to select only such arguments | |
65 | that are valid in the given context. | |
66 | ||
67 | config AUTOBOOT_ENCRYPTION | |
68 | bool "Enable encryption in autoboot stopping" | |
69 | depends on AUTOBOOT_KEYED | |
70 | default n | |
71 | ||
72 | config AUTOBOOT_DELAY_STR | |
73 | string "Delay autobooting via specific input key / string" | |
74 | depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION | |
75 | help | |
76 | This option delays the automatic boot feature by issuing | |
77 | a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR | |
78 | or the environment variable "bootdelaykey" is specified | |
79 | and this string is received from console input before | |
80 | autoboot starts booting, U-Boot gives a command prompt. The | |
81 | U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is | |
82 | used, otherwise it never times out. | |
83 | ||
84 | config AUTOBOOT_STOP_STR | |
85 | string "Stop autobooting via specific input key / string" | |
86 | depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION | |
87 | help | |
88 | This option enables stopping (aborting) of the automatic | |
89 | boot feature only by issuing a specific input key or | |
90 | string. If CONFIG_AUTOBOOT_STOP_STR or the environment | |
91 | variable "bootstopkey" is specified and this string is | |
92 | received from console input before autoboot starts booting, | |
93 | U-Boot gives a command prompt. The U-Boot prompt never | |
94 | times out, even if CONFIG_BOOT_RETRY_TIME is used. | |
95 | ||
96 | config AUTOBOOT_KEYED_CTRLC | |
97 | bool "Enable Ctrl-C autoboot interruption" | |
98 | depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION | |
99 | default n | |
100 | help | |
101 | This option allows for the boot sequence to be interrupted | |
102 | by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". | |
103 | Setting this variable provides an escape sequence from the | |
104 | limited "password" strings. | |
105 | ||
106 | config AUTOBOOT_STOP_STR_SHA256 | |
107 | string "Stop autobooting via SHA256 encrypted password" | |
108 | depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION | |
109 | help | |
110 | This option adds the feature to only stop the autobooting, | |
111 | and therefore boot into the U-Boot prompt, when the input | |
112 | string / password matches a values that is encypted via | |
113 | a SHA256 hash and saved in the environment. | |
114 | ||
115 | endmenu | |
116 | ||
117 | comment "Commands" | |
118 | ||
119 | menu "Info commands" | |
120 | ||
121 | config CMD_BDI | |
122 | bool "bdinfo" | |
123 | default y | |
124 | help | |
125 | Print board info | |
126 | ||
127 | config CMD_CONSOLE | |
128 | bool "coninfo" | |
129 | default y | |
130 | help | |
131 | Print console devices and information. | |
132 | ||
133 | config CMD_CPU | |
134 | bool "cpu" | |
135 | help | |
136 | Print information about available CPUs. This normally shows the | |
137 | number of CPUs, type (e.g. manufacturer, architecture, product or | |
138 | internal name) and clock frequency. Other information may be | |
139 | available depending on the CPU driver. | |
140 | ||
141 | config CMD_LICENSE | |
142 | bool "license" | |
143 | help | |
144 | Print GPL license text | |
145 | ||
146 | endmenu | |
147 | ||
148 | menu "Boot commands" | |
149 | ||
150 | config CMD_BOOTD | |
151 | bool "bootd" | |
152 | default y | |
153 | help | |
154 | Run the command stored in the environment "bootcmd", i.e. | |
155 | "bootd" does the same thing as "run bootcmd". | |
156 | ||
157 | config CMD_BOOTM | |
158 | bool "bootm" | |
159 | default y | |
160 | help | |
161 | Boot an application image from the memory. | |
162 | ||
b9939336 AG |
163 | config CMD_BOOTEFI |
164 | bool "bootefi" | |
165 | depends on EFI_LOADER | |
166 | default y | |
167 | help | |
168 | Boot an EFI image from memory. | |
169 | ||
72a8cf8d SG |
170 | config CMD_ELF |
171 | bool "bootelf, bootvx" | |
172 | default y | |
173 | help | |
174 | Boot an ELF/vxWorks image from the memory. | |
175 | ||
23922e26 MS |
176 | config CMD_FDT |
177 | bool "Flattened Device Tree utility commands" | |
178 | default y | |
179 | depends on OF_LIBFDT | |
180 | help | |
181 | Do FDT related setup before booting into the Operating System. | |
182 | ||
72a8cf8d SG |
183 | config CMD_GO |
184 | bool "go" | |
185 | default y | |
186 | help | |
187 | Start an application at a given address. | |
188 | ||
189 | config CMD_RUN | |
190 | bool "run" | |
191 | default y | |
192 | help | |
193 | Run the command in the given environment variable. | |
194 | ||
195 | config CMD_IMI | |
196 | bool "iminfo" | |
197 | default y | |
198 | help | |
199 | Print header information for application image. | |
200 | ||
201 | config CMD_IMLS | |
202 | bool "imls" | |
203 | default y | |
204 | help | |
205 | List all images found in flash | |
206 | ||
207 | config CMD_XIMG | |
208 | bool "imxtract" | |
209 | default y | |
210 | help | |
211 | Extract a part of a multi-image. | |
212 | ||
213 | config CMD_POWEROFF | |
214 | bool | |
215 | ||
216 | endmenu | |
217 | ||
218 | menu "Environment commands" | |
219 | ||
220 | config CMD_EXPORTENV | |
221 | bool "env export" | |
222 | default y | |
223 | help | |
224 | Export environments. | |
225 | ||
226 | config CMD_IMPORTENV | |
227 | bool "env import" | |
228 | default y | |
229 | help | |
230 | Import environments. | |
231 | ||
232 | config CMD_EDITENV | |
233 | bool "editenv" | |
234 | default y | |
235 | help | |
236 | Edit environment variable. | |
237 | ||
238 | config CMD_SAVEENV | |
239 | bool "saveenv" | |
240 | default y | |
241 | help | |
242 | Save all environment variables into the compiled-in persistent | |
243 | storage. | |
244 | ||
245 | config CMD_ENV_EXISTS | |
246 | bool "env exists" | |
247 | default y | |
248 | help | |
249 | Check if a variable is defined in the environment for use in | |
250 | shell scripting. | |
251 | ||
252 | endmenu | |
253 | ||
254 | menu "Memory commands" | |
255 | ||
256 | config CMD_MEMORY | |
257 | bool "md, mm, nm, mw, cp, cmp, base, loop" | |
258 | default y | |
259 | help | |
260 | Memeory commands. | |
261 | md - memory display | |
262 | mm - memory modify (auto-incrementing address) | |
263 | nm - memory modify (constant address) | |
264 | mw - memory write (fill) | |
265 | cp - memory copy | |
266 | cmp - memory compare | |
267 | base - print or set address offset | |
268 | loop - initinite loop on address range | |
269 | ||
270 | config CMD_CRC32 | |
271 | bool "crc32" | |
272 | default y | |
273 | help | |
274 | Compute CRC32. | |
275 | ||
276 | config LOOPW | |
277 | bool "loopw" | |
278 | help | |
279 | Infinite write loop on address range | |
280 | ||
281 | config CMD_MEMTEST | |
282 | bool "memtest" | |
283 | help | |
284 | Simple RAM read/write test. | |
285 | ||
286 | config CMD_MX_CYCLIC | |
287 | bool "mdc, mwc" | |
288 | help | |
289 | mdc - memory display cyclic | |
290 | mwc - memory write cyclic | |
291 | ||
292 | config CMD_MEMINFO | |
293 | bool "meminfo" | |
294 | help | |
295 | Display memory information. | |
296 | ||
297 | endmenu | |
298 | ||
299 | menu "Device access commands" | |
300 | ||
301 | config CMD_DM | |
302 | bool "dm - Access to driver model information" | |
303 | depends on DM | |
304 | default y | |
305 | help | |
306 | Provides access to driver model data structures and information, | |
307 | such as a list of devices, list of uclasses and the state of each | |
308 | device (e.g. activated). This is not required for operation, but | |
309 | can be useful to see the state of driver model for debugging or | |
310 | interest. | |
311 | ||
312 | config CMD_DEMO | |
313 | bool "demo - Demonstration commands for driver model" | |
314 | depends on DM | |
315 | help | |
316 | Provides a 'demo' command which can be used to play around with | |
317 | driver model. To use this properly you will need to enable one or | |
318 | both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). | |
319 | Otherwise you will always get an empty list of devices. The demo | |
320 | devices are defined in the sandbox device tree, so the easiest | |
321 | option is to use sandbox and pass the -d point to sandbox's | |
322 | u-boot.dtb file. | |
323 | ||
324 | config CMD_LOADB | |
325 | bool "loadb" | |
326 | default y | |
327 | help | |
328 | Load a binary file over serial line. | |
329 | ||
330 | config CMD_LOADS | |
331 | bool "loads" | |
332 | default y | |
333 | help | |
334 | Load an S-Record file over serial line | |
335 | ||
336 | config CMD_FLASH | |
337 | bool "flinfo, erase, protect" | |
338 | default y | |
339 | help | |
340 | NOR flash support. | |
341 | flinfo - print FLASH memory information | |
342 | erase - FLASH memory | |
343 | protect - enable or disable FLASH write protection | |
344 | ||
345 | config CMD_ARMFLASH | |
78d1e1d0 | 346 | #depends on FLASH_CFI_DRIVER |
72a8cf8d SG |
347 | bool "armflash" |
348 | help | |
349 | ARM Ltd reference designs flash partition access | |
350 | ||
351 | config CMD_NAND | |
352 | bool "nand" | |
353 | help | |
354 | NAND support. | |
355 | ||
356 | config CMD_SF | |
357 | bool "sf" | |
358 | help | |
359 | SPI Flash support | |
360 | ||
361 | config CMD_SPI | |
362 | bool "sspi" | |
363 | help | |
364 | SPI utility command. | |
365 | ||
366 | config CMD_I2C | |
367 | bool "i2c" | |
368 | help | |
369 | I2C support. | |
370 | ||
371 | config CMD_USB | |
372 | bool "usb" | |
373 | help | |
374 | USB support. | |
375 | ||
376 | config CMD_FPGA | |
377 | bool "fpga" | |
378 | default y | |
379 | help | |
380 | FPGA support. | |
381 | ||
382 | config CMD_REMOTEPROC | |
383 | bool "remoteproc" | |
384 | depends on REMOTEPROC | |
385 | help | |
386 | Support for Remote Processor control | |
387 | ||
388 | config CMD_GPIO | |
389 | bool "gpio" | |
390 | help | |
391 | GPIO support. | |
392 | ||
393 | endmenu | |
394 | ||
395 | ||
396 | menu "Shell scripting commands" | |
397 | ||
398 | config CMD_ECHO | |
399 | bool "echo" | |
400 | default y | |
401 | help | |
402 | Echo args to console | |
403 | ||
404 | config CMD_ITEST | |
405 | bool "itest" | |
406 | default y | |
407 | help | |
408 | Return true/false on integer compare. | |
409 | ||
410 | config CMD_SOURCE | |
411 | bool "source" | |
412 | default y | |
413 | help | |
414 | Run script from memory | |
415 | ||
416 | config CMD_SETEXPR | |
417 | bool "setexpr" | |
418 | default y | |
419 | help | |
420 | Evaluate boolean and math expressions and store the result in an env | |
421 | variable. | |
422 | Also supports loading the value at a memory location into a variable. | |
423 | If CONFIG_REGEX is enabled, setexpr also supports a gsub function. | |
424 | ||
425 | endmenu | |
426 | ||
427 | menu "Network commands" | |
428 | ||
429 | config CMD_NET | |
430 | bool "bootp, tftpboot" | |
431 | select NET | |
432 | default y | |
433 | help | |
434 | Network commands. | |
435 | bootp - boot image via network using BOOTP/TFTP protocol | |
436 | tftpboot - boot image via network using TFTP protocol | |
437 | ||
438 | config CMD_TFTPPUT | |
439 | bool "tftp put" | |
440 | help | |
441 | TFTP put command, for uploading files to a server | |
442 | ||
443 | config CMD_TFTPSRV | |
444 | bool "tftpsrv" | |
445 | help | |
446 | Act as a TFTP server and boot the first received file | |
447 | ||
448 | config CMD_RARP | |
449 | bool "rarpboot" | |
450 | help | |
451 | Boot image via network using RARP/TFTP protocol | |
452 | ||
453 | config CMD_DHCP | |
454 | bool "dhcp" | |
455 | help | |
456 | Boot image via network using DHCP/TFTP protocol | |
457 | ||
458 | config CMD_NFS | |
459 | bool "nfs" | |
460 | default y | |
461 | help | |
462 | Boot image via network using NFS protocol. | |
463 | ||
464 | config CMD_PING | |
465 | bool "ping" | |
466 | help | |
467 | Send ICMP ECHO_REQUEST to network host | |
468 | ||
469 | config CMD_CDP | |
470 | bool "cdp" | |
471 | help | |
472 | Perform CDP network configuration | |
473 | ||
474 | config CMD_SNTP | |
475 | bool "sntp" | |
476 | help | |
477 | Synchronize RTC via network | |
478 | ||
479 | config CMD_DNS | |
480 | bool "dns" | |
481 | help | |
482 | Lookup the IP of a hostname | |
483 | ||
484 | config CMD_LINK_LOCAL | |
485 | bool "linklocal" | |
486 | help | |
487 | Acquire a network IP address using the link-local protocol | |
488 | ||
489 | endmenu | |
490 | ||
491 | menu "Misc commands" | |
492 | ||
493 | config CMD_AMBAPP | |
494 | bool "ambapp" | |
495 | depends on LEON3 | |
496 | default y | |
497 | help | |
498 | Lists AMBA Plug-n-Play information. | |
499 | ||
500 | config SYS_AMBAPP_PRINT_ON_STARTUP | |
501 | bool "Show AMBA PnP info on startup" | |
502 | depends on CMD_AMBAPP | |
503 | default n | |
504 | help | |
505 | Show AMBA Plug-n-Play information on startup. | |
506 | ||
e40cf34a EN |
507 | config CMD_BLOCK_CACHE |
508 | bool "blkcache - control and stats for block cache" | |
509 | depends on BLOCK_CACHE | |
510 | default y if BLOCK_CACHE | |
511 | help | |
512 | Enable the blkcache command, which can be used to control the | |
513 | operation of the cache functions. | |
514 | This is most useful when fine-tuning the operation of the cache | |
515 | during development, but also allows the cache to be disabled when | |
516 | it might hurt performance (e.g. when using the ums command). | |
517 | ||
72a8cf8d SG |
518 | config CMD_TIME |
519 | bool "time" | |
520 | help | |
521 | Run commands and summarize execution time. | |
522 | ||
523 | # TODO: rename to CMD_SLEEP | |
524 | config CMD_MISC | |
525 | bool "sleep" | |
526 | default y | |
527 | help | |
528 | Delay execution for some time | |
529 | ||
530 | config CMD_TIMER | |
531 | bool "timer" | |
532 | help | |
533 | Access the system timer. | |
534 | ||
535 | config CMD_SETGETDCR | |
536 | bool "getdcr, setdcr, getidcr, setidcr" | |
537 | depends on 4xx | |
538 | default y | |
539 | help | |
540 | getdcr - Get an AMCC PPC 4xx DCR's value | |
541 | setdcr - Set an AMCC PPC 4xx DCR's value | |
542 | getidcr - Get a register value via indirect DCR addressing | |
543 | setidcr - Set a register value via indirect DCR addressing | |
544 | ||
545 | config CMD_SOUND | |
546 | bool "sound" | |
547 | depends on SOUND | |
548 | help | |
549 | This provides basic access to the U-Boot's sound support. The main | |
550 | feature is to play a beep. | |
551 | ||
552 | sound init - set up sound system | |
553 | sound play - play a sound | |
554 | ||
555 | endmenu | |
556 | ||
557 | config CMD_BOOTSTAGE | |
558 | bool "Enable the 'bootstage' command" | |
559 | depends on BOOTSTAGE | |
560 | help | |
561 | Add a 'bootstage' command which supports printing a report | |
562 | and un/stashing of bootstage data. | |
563 | ||
564 | menu "Power commands" | |
565 | config CMD_PMIC | |
566 | bool "Enable Driver Model PMIC command" | |
567 | depends on DM_PMIC | |
568 | help | |
569 | This is the pmic command, based on a driver model pmic's API. | |
570 | Command features are unchanged: | |
571 | - list - list pmic devices | |
572 | - pmic dev <id> - show or [set] operating pmic device (NEW) | |
573 | - pmic dump - dump registers | |
574 | - pmic read address - read byte of register at address | |
575 | - pmic write address - write byte to register at address | |
576 | The only one change for this command is 'dev' subcommand. | |
577 | ||
578 | config CMD_REGULATOR | |
579 | bool "Enable Driver Model REGULATOR command" | |
580 | depends on DM_REGULATOR | |
581 | help | |
582 | This command is based on driver model regulator's API. | |
583 | User interface features: | |
584 | - list - list regulator devices | |
585 | - regulator dev <id> - show or [set] operating regulator device | |
586 | - regulator info - print constraints info | |
587 | - regulator status - print operating status | |
588 | - regulator value <val] <-f> - print/[set] voltage value [uV] | |
589 | - regulator current <val> - print/[set] current value [uA] | |
590 | - regulator mode <id> - print/[set] operating mode id | |
591 | - regulator enable - enable the regulator output | |
592 | - regulator disable - disable the regulator output | |
593 | ||
594 | The '-f' (force) option can be used for set the value which exceeds | |
595 | the limits, which are found in device-tree and are kept in regulator's | |
596 | uclass platdata structure. | |
597 | ||
598 | endmenu | |
599 | ||
600 | menu "Security commands" | |
601 | config CMD_TPM | |
602 | bool "Enable the 'tpm' command" | |
603 | depends on TPM | |
604 | help | |
605 | This provides a means to talk to a TPM from the command line. A wide | |
606 | range of commands if provided - see 'tpm help' for details. The | |
607 | command requires a suitable TPM on your board and the correct driver | |
608 | must be enabled. | |
609 | ||
610 | config CMD_TPM_TEST | |
611 | bool "Enable the 'tpm test' command" | |
612 | depends on CMD_TPM | |
613 | help | |
614 | This provides a a series of tests to confirm that the TPM is working | |
615 | correctly. The tests cover initialisation, non-volatile RAM, extend, | |
616 | global lock and checking that timing is within expectations. The | |
617 | tests pass correctly on Infineon TPMs but may need to be adjusted | |
618 | for other devices. | |
619 | ||
620 | endmenu | |
621 | ||
622 | endmenu |