]> git.ipfire.org Git - people/ms/u-boot.git/blame - common/dlmalloc.src
projects / people / ms / u-boot.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
[people/ms/u-boot.git] / common / dlmalloc.src
CommitLineData
40c85557
WD		 1/* ---------- To make a malloc.h, start cutting here ------------ */
2
3/*
4 A version of malloc/free/realloc written by Doug Lea and released to the
5 public domain. Send questions/comments/complaints/performance data
6 to dl@cs.oswego.edu
7
8* VERSION 2.6.6 Sun Mar 5 19:10:03 2000 Doug Lea (dl at gee)
9
10 Note: There may be an updated version of this malloc obtainable at
11 ftp://g.oswego.edu/pub/misc/malloc.c
12 Check before installing!
13
14* Why use this malloc?
15
16 This is not the fastest, most space-conserving, most portable, or
17 most tunable malloc ever written. However it is among the fastest
18 while also being among the most space-conserving, portable and tunable.
19 Consistent balance across these factors results in a good general-purpose
20 allocator. For a high-level description, see
21 http://g.oswego.edu/dl/html/malloc.html
22
23* Synopsis of public routines
24
25 (Much fuller descriptions are contained in the program documentation below.)
26
27 malloc(size_t n);
28 Return a pointer to a newly allocated chunk of at least n bytes, or null
29 if no space is available.
30 free(Void_t* p);
31 Release the chunk of memory pointed to by p, or no effect if p is null.
32 realloc(Void_t* p, size_t n);
33 Return a pointer to a chunk of size n that contains the same data
34 as does chunk p up to the minimum of (n, p's size) bytes, or null
35 if no space is available. The returned pointer may or may not be
36 the same as p. If p is null, equivalent to malloc. Unless the
37 #define REALLOC_ZERO_BYTES_FREES below is set, realloc with a
38 size argument of zero (re)allocates a minimum-sized chunk.
39 memalign(size_t alignment, size_t n);
40 Return a pointer to a newly allocated chunk of n bytes, aligned
41 in accord with the alignment argument, which must be a power of
42 two.
43 valloc(size_t n);
44 Equivalent to memalign(pagesize, n), where pagesize is the page
45 size of the system (or as near to this as can be figured out from
46 all the includes/defines below.)
47 pvalloc(size_t n);
48 Equivalent to valloc(minimum-page-that-holds(n)), that is,
49 round up n to nearest pagesize.
50 calloc(size_t unit, size_t quantity);
51 Returns a pointer to quantity * unit bytes, with all locations
52 set to zero.
53 cfree(Void_t* p);
54 Equivalent to free(p).
55 malloc_trim(size_t pad);
56 Release all but pad bytes of freed top-most memory back
57 to the system. Return 1 if successful, else 0.
58 malloc_usable_size(Void_t* p);
59 Report the number usable allocated bytes associated with allocated
60 chunk p. This may or may not report more bytes than were requested,
61 due to alignment and minimum size constraints.
62 malloc_stats();
63 Prints brief summary statistics on stderr.
64 mallinfo()
65 Returns (by copy) a struct containing various summary statistics.
66 mallopt(int parameter_number, int parameter_value)
67 Changes one of the tunable parameters described below. Returns
68 1 if successful in changing the parameter, else 0.
69
70* Vital statistics:
71
72 Alignment: 8-byte
73 8 byte alignment is currently hardwired into the design. This
74 seems to suffice for all current machines and C compilers.
75
76 Assumed pointer representation: 4 or 8 bytes
77 Code for 8-byte pointers is untested by me but has worked
78 reliably by Wolfram Gloger, who contributed most of the
79 changes supporting this.
80
81 Assumed size_t representation: 4 or 8 bytes
82 Note that size_t is allowed to be 4 bytes even if pointers are 8.
83
84 Minimum overhead per allocated chunk: 4 or 8 bytes
85 Each malloced chunk has a hidden overhead of 4 bytes holding size
86 and status information.
87
88 Minimum allocated size: 4-byte ptrs: 16 bytes (including 4 overhead)
89 8-byte ptrs: 24/32 bytes (including, 4/8 overhead)
90
91 When a chunk is freed, 12 (for 4byte ptrs) or 20 (for 8 byte
92 ptrs but 4 byte size) or 24 (for 8/8) additional bytes are
93 needed; 4 (8) for a trailing size field
94 and 8 (16) bytes for free list pointers. Thus, the minimum
95 allocatable size is 16/24/32 bytes.
96
97 Even a request for zero bytes (i.e., malloc(0)) returns a
98 pointer to something of the minimum allocatable size.
99
100 Maximum allocated size: 4-byte size_t: 2^31 - 8 bytes
101 8-byte size_t: 2^63 - 16 bytes
102
103 It is assumed that (possibly signed) size_t bit values suffice to
104 represent chunk sizes. `Possibly signed' is due to the fact
105 that `size_t' may be defined on a system as either a signed or
106 an unsigned type. To be conservative, values that would appear
107 as negative numbers are avoided.
108 Requests for sizes with a negative sign bit when the request
109 size is treaded as a long will return null.
110
111 Maximum overhead wastage per allocated chunk: normally 15 bytes
112
113 Alignnment demands, plus the minimum allocatable size restriction
114 make the normal worst-case wastage 15 bytes (i.e., up to 15
115 more bytes will be allocated than were requested in malloc), with
116 two exceptions:
117 1. Because requests for zero bytes allocate non-zero space,
118 the worst case wastage for a request of zero bytes is 24 bytes.
119 2. For requests >= mmap_threshold that are serviced via
120 mmap(), the worst case wastage is 8 bytes plus the remainder
121 from a system page (the minimal mmap unit); typically 4096 bytes.
122
123* Limitations
124
125 Here are some features that are NOT currently supported
126
127 * No user-definable hooks for callbacks and the like.
128 * No automated mechanism for fully checking that all accesses
129 to malloced memory stay within their bounds.
130 * No support for compaction.
131
132* Synopsis of compile-time options:
133
134 People have reported using previous versions of this malloc on all
135 versions of Unix, sometimes by tweaking some of the defines
136 below. It has been tested most extensively on Solaris and
137 Linux. It is also reported to work on WIN32 platforms.
138 People have also reported adapting this malloc for use in
139 stand-alone embedded systems.
140
141 The implementation is in straight, hand-tuned ANSI C. Among other
142 consequences, it uses a lot of macros. Because of this, to be at
143 all usable, this code should be compiled using an optimizing compiler
144 (for example gcc -O2) that can simplify expressions and control
145 paths.
146
147 __STD_C (default: derived from C compiler defines)
148 Nonzero if using ANSI-standard C compiler, a C++ compiler, or
149 a C compiler sufficiently close to ANSI to get away with it.
150 DEBUG (default: NOT defined)
151 Define to enable debugging. Adds fairly extensive assertion-based
152 checking to help track down memory errors, but noticeably slows down
153 execution.
154 REALLOC_ZERO_BYTES_FREES (default: NOT defined)
155 Define this if you think that realloc(p, 0) should be equivalent
156 to free(p). Otherwise, since malloc returns a unique pointer for
157 malloc(0), so does realloc(p, 0).
158 HAVE_MEMCPY (default: defined)
159 Define if you are not otherwise using ANSI STD C, but still
160 have memcpy and memset in your C library and want to use them.
161 Otherwise, simple internal versions are supplied.
162 USE_MEMCPY (default: 1 if HAVE_MEMCPY is defined, 0 otherwise)
163 Define as 1 if you want the C library versions of memset and
164 memcpy called in realloc and calloc (otherwise macro versions are used).
165 At least on some platforms, the simple macro versions usually
166 outperform libc versions.
167 HAVE_MMAP (default: defined as 1)
168 Define to non-zero to optionally make malloc() use mmap() to
169 allocate very large blocks.
170 HAVE_MREMAP (default: defined as 0 unless Linux libc set)
171 Define to non-zero to optionally make realloc() use mremap() to
172 reallocate very large blocks.
173 malloc_getpagesize (default: derived from system #includes)
174 Either a constant or routine call returning the system page size.
175 HAVE_USR_INCLUDE_MALLOC_H (default: NOT defined)
176 Optionally define if you are on a system with a /usr/include/malloc.h
177 that declares struct mallinfo. It is not at all necessary to
178 define this even if you do, but will ensure consistency.
179 INTERNAL_SIZE_T (default: size_t)
180 Define to a 32-bit type (probably `unsigned int') if you are on a
181 64-bit machine, yet do not want or need to allow malloc requests of
182 greater than 2^31 to be handled. This saves space, especially for
183 very small chunks.
184 INTERNAL_LINUX_C_LIB (default: NOT defined)
185 Defined only when compiled as part of Linux libc.
186 Also note that there is some odd internal name-mangling via defines
187 (for example, internally, `malloc' is named `mALLOc') needed
188 when compiling in this case. These look funny but don't otherwise
189 affect anything.
190 WIN32 (default: undefined)
191 Define this on MS win (95, nt) platforms to compile in sbrk emulation.
192 LACKS_UNISTD_H (default: undefined if not WIN32)
193 Define this if your system does not have a <unistd.h>.
194 LACKS_SYS_PARAM_H (default: undefined if not WIN32)
195 Define this if your system does not have a <sys/param.h>.
196 MORECORE (default: sbrk)
197 The name of the routine to call to obtain more memory from the system.
198 MORECORE_FAILURE (default: -1)
199 The value returned upon failure of MORECORE.
200 MORECORE_CLEARS (default 1)
201 True (1) if the routine mapped to MORECORE zeroes out memory (which
202 holds for sbrk).
203 DEFAULT_TRIM_THRESHOLD
204 DEFAULT_TOP_PAD
205 DEFAULT_MMAP_THRESHOLD
206 DEFAULT_MMAP_MAX
207 Default values of tunable parameters (described in detail below)
208 controlling interaction with host system routines (sbrk, mmap, etc).
209 These values may also be changed dynamically via mallopt(). The
210 preset defaults are those that give best performance for typical
211 programs/systems.
212 USE_DL_PREFIX (default: undefined)
213 Prefix all public routines with the string 'dl'. Useful to
214 quickly avoid procedure declaration conflicts and linker symbol
215 conflicts with existing memory allocation routines.
216
217
218*/
219
220\f
221
222
223/* Preliminaries */
224
225#ifndef __STD_C
226#ifdef __STDC__
227#define __STD_C 1
228#else
229#if __cplusplus
230#define __STD_C 1
231#else
232#define __STD_C 0
233#endif /*__cplusplus*/
234#endif /*__STDC__*/
235#endif /*__STD_C*/
236
237#ifndef Void_t
238#if (__STD_C || defined(WIN32))
239#define Void_t void
240#else
241#define Void_t char
242#endif
243#endif /*Void_t*/
244
245#if __STD_C
246#include <stddef.h> /* for size_t */
247#else
248#include <sys/types.h>
249#endif
250
251#ifdef __cplusplus
252extern "C" {
253#endif
254
255#include <stdio.h> /* needed for malloc_stats */
256
257
258/*
259 Compile-time options
260*/
261
262
263/*
264 Debugging:
265
266 Because freed chunks may be overwritten with link fields, this
267 malloc will often die when freed memory is overwritten by user
268 programs. This can be very effective (albeit in an annoying way)
269 in helping track down dangling pointers.
270
271 If you compile with -DDEBUG, a number of assertion checks are
272 enabled that will catch more memory errors. You probably won't be
273 able to make much sense of the actual assertion errors, but they
274 should help you locate incorrectly overwritten memory. The
275 checking is fairly extensive, and will slow down execution
276 noticeably. Calling malloc_stats or mallinfo with DEBUG set will
277 attempt to check every non-mmapped allocated and free chunk in the
278 course of computing the summmaries. (By nature, mmapped regions
279 cannot be checked very much automatically.)
280
281 Setting DEBUG may also be helpful if you are trying to modify
282 this code. The assertions in the check routines spell out in more
283 detail the assumptions and invariants underlying the algorithms.
284
285*/
286
287#if DEBUG
288#include <assert.h>
289#else
290#define assert(x) ((void)0)
291#endif
292
293
294/*
295 INTERNAL_SIZE_T is the word-size used for internal bookkeeping
296 of chunk sizes. On a 64-bit machine, you can reduce malloc
297 overhead by defining INTERNAL_SIZE_T to be a 32 bit `unsigned int'
298 at the expense of not being able to handle requests greater than
299 2^31. This limitation is hardly ever a concern; you are encouraged
300 to set this. However, the default version is the same as size_t.
301*/
302
303#ifndef INTERNAL_SIZE_T
304#define INTERNAL_SIZE_T size_t
305#endif
306
307/*
308 REALLOC_ZERO_BYTES_FREES should be set if a call to
309 realloc with zero bytes should be the same as a call to free.
310 Some people think it should. Otherwise, since this malloc
311 returns a unique pointer for malloc(0), so does realloc(p, 0).
312*/
313
314
315/* #define REALLOC_ZERO_BYTES_FREES */
316
317
318/*
319 WIN32 causes an emulation of sbrk to be compiled in
320 mmap-based options are not currently supported in WIN32.
321*/
322
323/* #define WIN32 */
324#ifdef WIN32
325#define MORECORE wsbrk
326#define HAVE_MMAP 0
327
328#define LACKS_UNISTD_H
329#define LACKS_SYS_PARAM_H
330
331/*
332 Include 'windows.h' to get the necessary declarations for the
333 Microsoft Visual C++ data structures and routines used in the 'sbrk'
334 emulation.
335
336 Define WIN32_LEAN_AND_MEAN so that only the essential Microsoft
337 Visual C++ header files are included.
338*/
339#define WIN32_LEAN_AND_MEAN
340#include <windows.h>
341#endif
342
343
344/*
345 HAVE_MEMCPY should be defined if you are not otherwise using
346 ANSI STD C, but still have memcpy and memset in your C library
347 and want to use them in calloc and realloc. Otherwise simple
348 macro versions are defined here.
349
350 USE_MEMCPY should be defined as 1 if you actually want to
351 have memset and memcpy called. People report that the macro
352 versions are often enough faster than libc versions on many
353 systems that it is better to use them.
354
355*/
356
357#define HAVE_MEMCPY
358
359#ifndef USE_MEMCPY
360#ifdef HAVE_MEMCPY
361#define USE_MEMCPY 1
362#else
363#define USE_MEMCPY 0
364#endif
365#endif
366
367#if (__STD_C || defined(HAVE_MEMCPY))
368
369#if __STD_C
370void* memset(void*, int, size_t);
371void* memcpy(void*, const void*, size_t);
372#else
373#ifdef WIN32
374// On Win32 platforms, 'memset()' and 'memcpy()' are already declared in
375// 'windows.h'
376#else
377Void_t* memset();
378Void_t* memcpy();
379#endif
380#endif
381#endif
382
383#if USE_MEMCPY
384
385/* The following macros are only invoked with (2n+1)-multiples of
386 INTERNAL_SIZE_T units, with a positive integer n. This is exploited
387 for fast inline execution when n is small. */
388
389#define MALLOC_ZERO(charp, nbytes) \
390do { \
391 INTERNAL_SIZE_T mzsz = (nbytes); \
392 if(mzsz <= 9*sizeof(mzsz)) { \
393 INTERNAL_SIZE_T* mz = (INTERNAL_SIZE_T*) (charp); \
394 if(mzsz >= 5*sizeof(mzsz)) { *mz++ = 0; \
395 *mz++ = 0; \
396 if(mzsz >= 7*sizeof(mzsz)) { *mz++ = 0; \
397 *mz++ = 0; \
398 if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0; \
399 *mz++ = 0; }}} \
400 *mz++ = 0; \
401 *mz++ = 0; \
402 *mz = 0; \
403 } else memset((charp), 0, mzsz); \
404} while(0)
405
406#define MALLOC_COPY(dest,src,nbytes) \
407do { \
408 INTERNAL_SIZE_T mcsz = (nbytes); \
409 if(mcsz <= 9*sizeof(mcsz)) { \
410 INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src); \
411 INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest); \
412 if(mcsz >= 5*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \
413 *mcdst++ = *mcsrc++; \
414 if(mcsz >= 7*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \
415 *mcdst++ = *mcsrc++; \
416 if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \
417 *mcdst++ = *mcsrc++; }}} \
418 *mcdst++ = *mcsrc++; \
419 *mcdst++ = *mcsrc++; \
420 *mcdst = *mcsrc ; \
421 } else memcpy(dest, src, mcsz); \
422} while(0)
423
424#else /* !USE_MEMCPY */
425
426/* Use Duff's device for good zeroing/copying performance. */
427
428#define MALLOC_ZERO(charp, nbytes) \
429do { \
430 INTERNAL_SIZE_T* mzp = (INTERNAL_SIZE_T*)(charp); \
431 long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn; \
432 if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; } \
433 switch (mctmp) { \
434 case 0: for(;;) { *mzp++ = 0; \
435 case 7: *mzp++ = 0; \
436 case 6: *mzp++ = 0; \
437 case 5: *mzp++ = 0; \
438 case 4: *mzp++ = 0; \
439 case 3: *mzp++ = 0; \
440 case 2: *mzp++ = 0; \
441 case 1: *mzp++ = 0; if(mcn <= 0) break; mcn--; } \
442 } \
443} while(0)
444
445#define MALLOC_COPY(dest,src,nbytes) \
446do { \
447 INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) src; \
448 INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) dest; \
449 long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn; \
450 if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; } \
451 switch (mctmp) { \
452 case 0: for(;;) { *mcdst++ = *mcsrc++; \
453 case 7: *mcdst++ = *mcsrc++; \
454 case 6: *mcdst++ = *mcsrc++; \
455 case 5: *mcdst++ = *mcsrc++; \
456 case 4: *mcdst++ = *mcsrc++; \
457 case 3: *mcdst++ = *mcsrc++; \
458 case 2: *mcdst++ = *mcsrc++; \
459 case 1: *mcdst++ = *mcsrc++; if(mcn <= 0) break; mcn--; } \
460 } \
461} while(0)
462
463#endif
464
465
466/*
467 Define HAVE_MMAP to optionally make malloc() use mmap() to
468 allocate very large blocks. These will be returned to the
469 operating system immediately after a free().
470*/
471
472#ifndef HAVE_MMAP
473#define HAVE_MMAP 1
474#endif
475
476/*
477 Define HAVE_MREMAP to make realloc() use mremap() to re-allocate
478 large blocks. This is currently only possible on Linux with
479 kernel versions newer than 1.3.77.
480*/
481
482#ifndef HAVE_MREMAP
483#ifdef INTERNAL_LINUX_C_LIB
484#define HAVE_MREMAP 1
485#else
486#define HAVE_MREMAP 0
487#endif
488#endif
489
490#if HAVE_MMAP
491
492#include <unistd.h>
493#include <fcntl.h>
494#include <sys/mman.h>
495
496#if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
497#define MAP_ANONYMOUS MAP_ANON
498#endif
499
500#endif /* HAVE_MMAP */
501
502/*
503 Access to system page size. To the extent possible, this malloc
504 manages memory from the system in page-size units.
505
506 The following mechanics for getpagesize were adapted from
507 bsd/gnu getpagesize.h
508*/
509
510#ifndef LACKS_UNISTD_H
511# include <unistd.h>
512#endif
513
514#ifndef malloc_getpagesize
515# ifdef _SC_PAGESIZE /* some SVR4 systems omit an underscore */
516# ifndef _SC_PAGE_SIZE
517# define _SC_PAGE_SIZE _SC_PAGESIZE
518# endif
519# endif
520# ifdef _SC_PAGE_SIZE
521# define malloc_getpagesize sysconf(_SC_PAGE_SIZE)
522# else
523# if defined(BSD) || defined(DGUX) || defined(HAVE_GETPAGESIZE)
524 extern size_t getpagesize();
525# define malloc_getpagesize getpagesize()
526# else
527# ifdef WIN32
528# define malloc_getpagesize (4096) /* TBD: Use 'GetSystemInfo' instead */
529# else
530# ifndef LACKS_SYS_PARAM_H
531# include <sys/param.h>
532# endif
533# ifdef EXEC_PAGESIZE
534# define malloc_getpagesize EXEC_PAGESIZE
535# else
536# ifdef NBPG
537# ifndef CLSIZE
538# define malloc_getpagesize NBPG
539# else
540# define malloc_getpagesize (NBPG * CLSIZE)
541# endif
542# else
543# ifdef NBPC
544# define malloc_getpagesize NBPC
545# else
546# ifdef PAGESIZE
547# define malloc_getpagesize PAGESIZE
548# else
549# define malloc_getpagesize (4096) /* just guess */
550# endif
551# endif
552# endif
553# endif
554# endif
555# endif
556# endif
557#endif
558
559
560
561/*
562
563 This version of malloc supports the standard SVID/XPG mallinfo
564 routine that returns a struct containing the same kind of
565 information you can get from malloc_stats. It should work on
566 any SVID/XPG compliant system that has a /usr/include/malloc.h
567 defining struct mallinfo. (If you'd like to install such a thing
568 yourself, cut out the preliminary declarations as described above
569 and below and save them in a malloc.h file. But there's no
570 compelling reason to bother to do this.)
571
572 The main declaration needed is the mallinfo struct that is returned
573 (by-copy) by mallinfo(). The SVID/XPG malloinfo struct contains a
574 bunch of fields, most of which are not even meaningful in this
575 version of malloc. Some of these fields are are instead filled by
576 mallinfo() with other numbers that might possibly be of interest.
577
578 HAVE_USR_INCLUDE_MALLOC_H should be set if you have a
579 /usr/include/malloc.h file that includes a declaration of struct
580 mallinfo. If so, it is included; else an SVID2/XPG2 compliant
581 version is declared below. These must be precisely the same for
582 mallinfo() to work.
583
584*/
585
586/* #define HAVE_USR_INCLUDE_MALLOC_H */
587
588#if HAVE_USR_INCLUDE_MALLOC_H
589#include "/usr/include/malloc.h"
590#else
591
592/* SVID2/XPG mallinfo structure */
593
594struct mallinfo {
595 int arena; /* total space allocated from system */
596 int ordblks; /* number of non-inuse chunks */
597 int smblks; /* unused -- always zero */
598 int hblks; /* number of mmapped regions */
599 int hblkhd; /* total space in mmapped regions */
600 int usmblks; /* unused -- always zero */
601 int fsmblks; /* unused -- always zero */
602 int uordblks; /* total allocated space */
603 int fordblks; /* total non-inuse space */
604 int keepcost; /* top-most, releasable (via malloc_trim) space */
605};
606
607/* SVID2/XPG mallopt options */
608
609#define M_MXFAST 1 /* UNUSED in this malloc */
610#define M_NLBLKS 2 /* UNUSED in this malloc */
611#define M_GRAIN 3 /* UNUSED in this malloc */
612#define M_KEEP 4 /* UNUSED in this malloc */
613
614#endif
615
616/* mallopt options that actually do something */
617
618#define M_TRIM_THRESHOLD -1
619#define M_TOP_PAD -2
620#define M_MMAP_THRESHOLD -3
621#define M_MMAP_MAX -4
622
623
624
625#ifndef DEFAULT_TRIM_THRESHOLD
626#define DEFAULT_TRIM_THRESHOLD (128 * 1024)
627#endif
628
629/*
630 M_TRIM_THRESHOLD is the maximum amount of unused top-most memory
631 to keep before releasing via malloc_trim in free().
632
633 Automatic trimming is mainly useful in long-lived programs.
634 Because trimming via sbrk can be slow on some systems, and can
635 sometimes be wasteful (in cases where programs immediately
636 afterward allocate more large chunks) the value should be high
637 enough so that your overall system performance would improve by
638 releasing.
639
640 The trim threshold and the mmap control parameters (see below)
641 can be traded off with one another. Trimming and mmapping are
642 two different ways of releasing unused memory back to the
643 system. Between these two, it is often possible to keep
644 system-level demands of a long-lived program down to a bare
645 minimum. For example, in one test suite of sessions measuring
646 the XF86 X server on Linux, using a trim threshold of 128K and a
647 mmap threshold of 192K led to near-minimal long term resource
648 consumption.
649
650 If you are using this malloc in a long-lived program, it should
651 pay to experiment with these values. As a rough guide, you
652 might set to a value close to the average size of a process
653 (program) running on your system. Releasing this much memory
654 would allow such a process to run in memory. Generally, it's
655 worth it to tune for trimming rather tham memory mapping when a
656 program undergoes phases where several large chunks are
657 allocated and released in ways that can reuse each other's
658 storage, perhaps mixed with phases where there are no such
659 chunks at all. And in well-behaved long-lived programs,
660 controlling release of large blocks via trimming versus mapping
661 is usually faster.
662
663 However, in most programs, these parameters serve mainly as
664 protection against the system-level effects of carrying around
665 massive amounts of unneeded memory. Since frequent calls to
666 sbrk, mmap, and munmap otherwise degrade performance, the default
667 parameters are set to relatively high values that serve only as
668 safeguards.
669
670 The default trim value is high enough to cause trimming only in
671 fairly extreme (by current memory consumption standards) cases.
672 It must be greater than page size to have any useful effect. To
673 disable trimming completely, you can set to (unsigned long)(-1);
674
675
676*/
677
678
679#ifndef DEFAULT_TOP_PAD
680#define DEFAULT_TOP_PAD (0)
681#endif
682
683/*
684 M_TOP_PAD is the amount of extra `padding' space to allocate or
685 retain whenever sbrk is called. It is used in two ways internally:
686
687 * When sbrk is called to extend the top of the arena to satisfy
688 a new malloc request, this much padding is added to the sbrk
689 request.
690
691 * When malloc_trim is called automatically from free(),
692 it is used as the `pad' argument.
693
694 In both cases, the actual amount of padding is rounded
695 so that the end of the arena is always a system page boundary.
696
697 The main reason for using padding is to avoid calling sbrk so
698 often. Having even a small pad greatly reduces the likelihood
699 that nearly every malloc request during program start-up (or
700 after trimming) will invoke sbrk, which needlessly wastes
701 time.
702
703 Automatic rounding-up to page-size units is normally sufficient
704 to avoid measurable overhead, so the default is 0. However, in
705 systems where sbrk is relatively slow, it can pay to increase
706 this value, at the expense of carrying around more memory than
707 the program needs.
708
709*/
710
711
712#ifndef DEFAULT_MMAP_THRESHOLD
713#define DEFAULT_MMAP_THRESHOLD (128 * 1024)
714#endif
715
716/*
717
718 M_MMAP_THRESHOLD is the request size threshold for using mmap()
719 to service a request. Requests of at least this size that cannot
720 be allocated using already-existing space will be serviced via mmap.
721 (If enough normal freed space already exists it is used instead.)
722
723 Using mmap segregates relatively large chunks of memory so that
724 they can be individually obtained and released from the host
725 system. A request serviced through mmap is never reused by any
726 other request (at least not directly; the system may just so
727 happen to remap successive requests to the same locations).
728
729 Segregating space in this way has the benefit that mmapped space
730 can ALWAYS be individually released back to the system, which
731 helps keep the system level memory demands of a long-lived
732 program low. Mapped memory can never become `locked' between
733 other chunks, as can happen with normally allocated chunks, which
734 menas that even trimming via malloc_trim would not release them.
735
736 However, it has the disadvantages that:
737
738 1. The space cannot be reclaimed, consolidated, and then
739 used to service later requests, as happens with normal chunks.
740 2. It can lead to more wastage because of mmap page alignment
741 requirements
742 3. It causes malloc performance to be more dependent on host
743 system memory management support routines which may vary in
744 implementation quality and may impose arbitrary
745 limitations. Generally, servicing a request via normal
746 malloc steps is faster than going through a system's mmap.
747
748 All together, these considerations should lead you to use mmap
749 only for relatively large requests.
750
751
752*/
753
754
755
756#ifndef DEFAULT_MMAP_MAX
757#if HAVE_MMAP
758#define DEFAULT_MMAP_MAX (64)
759#else
760#define DEFAULT_MMAP_MAX (0)
761#endif
762#endif
763
764/*
765 M_MMAP_MAX is the maximum number of requests to simultaneously
766 service using mmap. This parameter exists because:
767
768 1. Some systems have a limited number of internal tables for
769 use by mmap.
770 2. In most systems, overreliance on mmap can degrade overall
771 performance.
772 3. If a program allocates many large regions, it is probably
773 better off using normal sbrk-based allocation routines that
774 can reclaim and reallocate normal heap memory. Using a
775 small value allows transition into this mode after the
776 first few allocations.
777
778 Setting to 0 disables all use of mmap. If HAVE_MMAP is not set,
779 the default value is 0, and attempts to set it to non-zero values
780 in mallopt will fail.
781*/
782
783
784
785
786/*
787 USE_DL_PREFIX will prefix all public routines with the string 'dl'.
788 Useful to quickly avoid procedure declaration conflicts and linker
789 symbol conflicts with existing memory allocation routines.
790
791*/
792
793/* #define USE_DL_PREFIX */
794
795
796
797
798/*
799
800 Special defines for linux libc
801
802 Except when compiled using these special defines for Linux libc
803 using weak aliases, this malloc is NOT designed to work in
804 multithreaded applications. No semaphores or other concurrency
805 control are provided to ensure that multiple malloc or free calls
806 don't run at the same time, which could be disasterous. A single
807 semaphore could be used across malloc, realloc, and free (which is
808 essentially the effect of the linux weak alias approach). It would
809 be hard to obtain finer granularity.
810
811*/
812
813
814#ifdef INTERNAL_LINUX_C_LIB
815
816#if __STD_C
817
818Void_t * __default_morecore_init (ptrdiff_t);
819Void_t *(*__morecore)(ptrdiff_t) = __default_morecore_init;
820
821#else
822
823Void_t * __default_morecore_init ();
824Void_t *(*__morecore)() = __default_morecore_init;
825
826#endif
827
828#define MORECORE (*__morecore)
829#define MORECORE_FAILURE 0
830#define MORECORE_CLEARS 1
831
832#else /* INTERNAL_LINUX_C_LIB */
833
834#if __STD_C
835extern Void_t* sbrk(ptrdiff_t);
836#else
837extern Void_t* sbrk();
838#endif
839
840#ifndef MORECORE
841#define MORECORE sbrk
842#endif
843
844#ifndef MORECORE_FAILURE
845#define MORECORE_FAILURE -1
846#endif
847
848#ifndef MORECORE_CLEARS
849#define MORECORE_CLEARS 1
850#endif
851
852#endif /* INTERNAL_LINUX_C_LIB */
853
854#if defined(INTERNAL_LINUX_C_LIB) && defined(__ELF__)
855
856#define cALLOc __libc_calloc
857#define fREe __libc_free
858#define mALLOc __libc_malloc
859#define mEMALIGn __libc_memalign
860#define rEALLOc __libc_realloc
861#define vALLOc __libc_valloc
862#define pvALLOc __libc_pvalloc
863#define mALLINFo __libc_mallinfo
864#define mALLOPt __libc_mallopt
865
866#pragma weak calloc = __libc_calloc
867#pragma weak free = __libc_free
868#pragma weak cfree = __libc_free
869#pragma weak malloc = __libc_malloc
870#pragma weak memalign = __libc_memalign
871#pragma weak realloc = __libc_realloc
872#pragma weak valloc = __libc_valloc
873#pragma weak pvalloc = __libc_pvalloc
874#pragma weak mallinfo = __libc_mallinfo
875#pragma weak mallopt = __libc_mallopt
876
877#else
878
879#ifdef USE_DL_PREFIX
880#define cALLOc dlcalloc
881#define fREe dlfree
882#define mALLOc dlmalloc
883#define mEMALIGn dlmemalign
884#define rEALLOc dlrealloc
885#define vALLOc dlvalloc
886#define pvALLOc dlpvalloc
887#define mALLINFo dlmallinfo
888#define mALLOPt dlmallopt
889#else /* USE_DL_PREFIX */
890#define cALLOc calloc
891#define fREe free
892#define mALLOc malloc
893#define mEMALIGn memalign
894#define rEALLOc realloc
895#define vALLOc valloc
896#define pvALLOc pvalloc
897#define mALLINFo mallinfo
898#define mALLOPt mallopt
899#endif /* USE_DL_PREFIX */
900
901#endif
902
903/* Public routines */
904
905#if __STD_C
906
907Void_t* mALLOc(size_t);
908void fREe(Void_t*);
909Void_t* rEALLOc(Void_t*, size_t);
910Void_t* mEMALIGn(size_t, size_t);
911Void_t* vALLOc(size_t);
912Void_t* pvALLOc(size_t);
913Void_t* cALLOc(size_t, size_t);
914void cfree(Void_t*);
915int malloc_trim(size_t);
916size_t malloc_usable_size(Void_t*);
917void malloc_stats();
918int mALLOPt(int, int);
919struct mallinfo mALLINFo(void);
920#else
921Void_t* mALLOc();
922void fREe();
923Void_t* rEALLOc();
924Void_t* mEMALIGn();
925Void_t* vALLOc();
926Void_t* pvALLOc();
927Void_t* cALLOc();
928void cfree();
929int malloc_trim();
930size_t malloc_usable_size();
931void malloc_stats();
932int mALLOPt();
933struct mallinfo mALLINFo();
934#endif
935
936
937#ifdef __cplusplus
938}; /* end of extern "C" */
939#endif
940
941/* ---------- To make a malloc.h, end cutting here ------------ */
942
943
944/*
945 Emulation of sbrk for WIN32
946 All code within the ifdef WIN32 is untested by me.
947
948 Thanks to Martin Fong and others for supplying this.
949*/
950
951
952#ifdef WIN32
953
954#define AlignPage(add) (((add) + (malloc_getpagesize-1)) & \
955~(malloc_getpagesize-1))
956#define AlignPage64K(add) (((add) + (0x10000 - 1)) & ~(0x10000 - 1))
957
958/* resrve 64MB to insure large contiguous space */
959#define RESERVED_SIZE (1024*1024*64)
960#define NEXT_SIZE (2048*1024)
961#define TOP_MEMORY ((unsigned long)2*1024*1024*1024)
962
963struct GmListElement;
964typedef struct GmListElement GmListElement;
965
966struct GmListElement
967{
968 GmListElement* next;
969 void* base;
970};
971
972static GmListElement* head = 0;
973static unsigned int gNextAddress = 0;
974static unsigned int gAddressBase = 0;
975static unsigned int gAllocatedSize = 0;
976
977static
978GmListElement* makeGmListElement (void* bas)
979{
980 GmListElement* this;
981 this = (GmListElement*)(void*)LocalAlloc (0, sizeof (GmListElement));
982 assert (this);
983 if (this)
984 {
985 this->base = bas;
986 this->next = head;
987 head = this;
988 }
989 return this;
990}
991
992void gcleanup ()
993{
994 BOOL rval;
995 assert ( (head == NULL) || (head->base == (void*)gAddressBase));
996 if (gAddressBase && (gNextAddress - gAddressBase))
997 {
998 rval = VirtualFree ((void*)gAddressBase,
999 gNextAddress - gAddressBase,
1000 MEM_DECOMMIT);
1001 assert (rval);
1002 }
1003 while (head)
1004 {
1005 GmListElement* next = head->next;
1006 rval = VirtualFree (head->base, 0, MEM_RELEASE);
1007 assert (rval);
1008 LocalFree (head);
1009 head = next;
1010 }
1011}
1012
1013static
1014void* findRegion (void* start_address, unsigned long size)
1015{
1016 MEMORY_BASIC_INFORMATION info;
1017 if (size >= TOP_MEMORY) return NULL;
1018
1019 while ((unsigned long)start_address + size < TOP_MEMORY)
1020 {
1021 VirtualQuery (start_address, &info, sizeof (info));
1022 if ((info.State == MEM_FREE) && (info.RegionSize >= size))
1023 return start_address;
1024 else
1025 {
1026 // Requested region is not available so see if the
1027 // next region is available. Set 'start_address'
1028 // to the next region and call 'VirtualQuery()'
1029 // again.
1030
1031 start_address = (char*)info.BaseAddress + info.RegionSize;
1032
1033 // Make sure we start looking for the next region
1034 // on the *next* 64K boundary. Otherwise, even if
1035 // the new region is free according to
1036 // 'VirtualQuery()', the subsequent call to
1037 // 'VirtualAlloc()' (which follows the call to
1038 // this routine in 'wsbrk()') will round *down*
1039 // the requested address to a 64K boundary which
1040 // we already know is an address in the
1041 // unavailable region. Thus, the subsequent call
1042 // to 'VirtualAlloc()' will fail and bring us back
1043 // here, causing us to go into an infinite loop.
1044
1045 start_address =
1046 (void *) AlignPage64K((unsigned long) start_address);
1047 }
1048 }
1049 return NULL;
1050
1051}
1052
1053
1054void* wsbrk (long size)
1055{
1056 void* tmp;
1057 if (size > 0)
1058 {
1059 if (gAddressBase == 0)
1060 {
1061 gAllocatedSize = max (RESERVED_SIZE, AlignPage (size));
1062 gNextAddress = gAddressBase =
1063 (unsigned int)VirtualAlloc (NULL, gAllocatedSize,
1064 MEM_RESERVE, PAGE_NOACCESS);
1065 } else if (AlignPage (gNextAddress + size) > (gAddressBase +
1066gAllocatedSize))
1067 {
1068 long new_size = max (NEXT_SIZE, AlignPage (size));
1069 void* new_address = (void*)(gAddressBase+gAllocatedSize);
1070 do
1071 {
1072 new_address = findRegion (new_address, new_size);
1073
1074 if (new_address == 0)
1075 return (void*)-1;
1076
1077 gAddressBase = gNextAddress =
1078 (unsigned int)VirtualAlloc (new_address, new_size,
1079 MEM_RESERVE, PAGE_NOACCESS);
1080 // repeat in case of race condition
1081 // The region that we found has been snagged
1082 // by another thread
1083 }
1084 while (gAddressBase == 0);
1085
1086 assert (new_address == (void*)gAddressBase);
1087
1088 gAllocatedSize = new_size;
1089
1090 if (!makeGmListElement ((void*)gAddressBase))
1091 return (void*)-1;
1092 }
1093 if ((size + gNextAddress) > AlignPage (gNextAddress))
1094 {
1095 void* res;
1096 res = VirtualAlloc ((void*)AlignPage (gNextAddress),
1097 (size + gNextAddress -
1098 AlignPage (gNextAddress)),
1099 MEM_COMMIT, PAGE_READWRITE);
1100 if (res == 0)
1101 return (void*)-1;
1102 }
1103 tmp = (void*)gNextAddress;
1104 gNextAddress = (unsigned int)tmp + size;
1105 return tmp;
1106 }
1107 else if (size < 0)
1108 {
1109 unsigned int alignedGoal = AlignPage (gNextAddress + size);
1110 /* Trim by releasing the virtual memory */
1111 if (alignedGoal >= gAddressBase)
1112 {
1113 VirtualFree ((void*)alignedGoal, gNextAddress - alignedGoal,
1114 MEM_DECOMMIT);
1115 gNextAddress = gNextAddress + size;
1116 return (void*)gNextAddress;
1117 }
1118 else
1119 {
1120 VirtualFree ((void*)gAddressBase, gNextAddress - gAddressBase,
1121 MEM_DECOMMIT);
1122 gNextAddress = gAddressBase;
1123 return (void*)-1;
1124 }
1125 }
1126 else
1127 {
1128 return (void*)gNextAddress;
1129 }
1130}
1131
1132#endif
1133
1134\f
1135
1136/*
1137 Type declarations
1138*/
1139
1140
1141struct malloc_chunk
1142{
1143 INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */
1144 INTERNAL_SIZE_T size; /* Size in bytes, including overhead. */
1145 struct malloc_chunk* fd; /* double links -- used only if free. */
1146 struct malloc_chunk* bk;
1147};
1148
1149typedef struct malloc_chunk* mchunkptr;
1150
1151/*
1152
1153 malloc_chunk details:
1154
1155 (The following includes lightly edited explanations by Colin Plumb.)
1156
1157 Chunks of memory are maintained using a `boundary tag' method as
1158 described in e.g., Knuth or Standish. (See the paper by Paul
1159 Wilson ftp://ftp.cs.utexas.edu/pub/garbage/allocsrv.ps for a
1160 survey of such techniques.) Sizes of free chunks are stored both
1161 in the front of each chunk and at the end. This makes
1162 consolidating fragmented chunks into bigger chunks very fast. The
1163 size fields also hold bits representing whether chunks are free or
1164 in use.
1165
1166 An allocated chunk looks like this:
1167
1168
1169 chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1170 | Size of previous chunk, if allocated | |
1171 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1172 | Size of chunk, in bytes |P|
1173 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1174 | User data starts here... .
1175 . .
1176 . (malloc_usable_space() bytes) .
1177 . |
1178nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1179 | Size of chunk |
1180 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1181
1182
1183 Where "chunk" is the front of the chunk for the purpose of most of
1184 the malloc code, but "mem" is the pointer that is returned to the
1185 user. "Nextchunk" is the beginning of the next contiguous chunk.
1186
1187 Chunks always begin on even word boundries, so the mem portion
1188 (which is returned to the user) is also on an even word boundary, and
1189 thus double-word aligned.
1190
1191 Free chunks are stored in circular doubly-linked lists, and look like this:
1192
1193 chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1194 | Size of previous chunk |
1195 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1196 `head:' | Size of chunk, in bytes |P|
1197 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1198 | Forward pointer to next chunk in list |
1199 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1200 | Back pointer to previous chunk in list |
1201 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1202 | Unused space (may be 0 bytes long) .
1203 . .
1204 . |
1205nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1206 `foot:' | Size of chunk, in bytes |
1207 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1208
1209 The P (PREV_INUSE) bit, stored in the unused low-order bit of the
1210 chunk size (which is always a multiple of two words), is an in-use
1211 bit for the *previous* chunk. If that bit is *clear*, then the
1212 word before the current chunk size contains the previous chunk
1213 size, and can be used to find the front of the previous chunk.
1214 (The very first chunk allocated always has this bit set,
1215 preventing access to non-existent (or non-owned) memory.)
1216
1217 Note that the `foot' of the current chunk is actually represented
1218 as the prev_size of the NEXT chunk. (This makes it easier to
1219 deal with alignments etc).
1220
1221 The two exceptions to all this are
1222
1223 1. The special chunk `top', which doesn't bother using the
1224 trailing size field since there is no
1225 next contiguous chunk that would have to index off it. (After
1226 initialization, `top' is forced to always exist. If it would
1227 become less than MINSIZE bytes long, it is replenished via
1228 malloc_extend_top.)
1229
1230 2. Chunks allocated via mmap, which have the second-lowest-order
1231 bit (IS_MMAPPED) set in their size fields. Because they are
1232 never merged or traversed from any other chunk, they have no
1233 foot size or inuse information.
1234
1235 Available chunks are kept in any of several places (all declared below):
1236
1237 * `av': An array of chunks serving as bin headers for consolidated
1238 chunks. Each bin is doubly linked. The bins are approximately
1239 proportionally (log) spaced. There are a lot of these bins
1240 (128). This may look excessive, but works very well in
1241 practice. All procedures maintain the invariant that no
1242 consolidated chunk physically borders another one. Chunks in
1243 bins are kept in size order, with ties going to the
1244 approximately least recently used chunk.
1245
1246 The chunks in each bin are maintained in decreasing sorted order by
1247 size. This is irrelevant for the small bins, which all contain
1248 the same-sized chunks, but facilitates best-fit allocation for
1249 larger chunks. (These lists are just sequential. Keeping them in
1250 order almost never requires enough traversal to warrant using
1251 fancier ordered data structures.) Chunks of the same size are
1252 linked with the most recently freed at the front, and allocations
1253 are taken from the back. This results in LRU or FIFO allocation
1254 order, which tends to give each chunk an equal opportunity to be
1255 consolidated with adjacent freed chunks, resulting in larger free
1256 chunks and less fragmentation.
1257
1258 * `top': The top-most available chunk (i.e., the one bordering the
1259 end of available memory) is treated specially. It is never
1260 included in any bin, is used only if no other chunk is
1261 available, and is released back to the system if it is very
1262 large (see M_TRIM_THRESHOLD).
1263
1264 * `last_remainder': A bin holding only the remainder of the
1265 most recently split (non-top) chunk. This bin is checked
1266 before other non-fitting chunks, so as to provide better
1267 locality for runs of sequentially allocated chunks.
1268
1269 * Implicitly, through the host system's memory mapping tables.
1270 If supported, requests greater than a threshold are usually
1271 serviced via calls to mmap, and then later released via munmap.
1272
1273*/
1274
1275
1276
1277\f
1278
1279
1280/* sizes, alignments */
1281
1282#define SIZE_SZ (sizeof(INTERNAL_SIZE_T))
1283#define MALLOC_ALIGNMENT (SIZE_SZ + SIZE_SZ)
1284#define MALLOC_ALIGN_MASK (MALLOC_ALIGNMENT - 1)
1285#define MINSIZE (sizeof(struct malloc_chunk))
1286
1287/* conversion from malloc headers to user pointers, and back */
1288
1289#define chunk2mem(p) ((Void_t*)((char*)(p) + 2*SIZE_SZ))
1290#define mem2chunk(mem) ((mchunkptr)((char*)(mem) - 2*SIZE_SZ))
1291
1292/* pad request bytes into a usable size */
1293
1294#define request2size(req) \
1295 (((long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
1296 (long)(MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \
1297 (((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK)))
1298
1299/* Check if m has acceptable alignment */
1300
1301#define aligned_OK(m) (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0)
1302
1303
1304\f
1305
1306/*
1307 Physical chunk operations
1308*/
1309
1310
1311/* size field is or'ed with PREV_INUSE when previous adjacent chunk in use */
1312
1313#define PREV_INUSE 0x1
1314
1315/* size field is or'ed with IS_MMAPPED if the chunk was obtained with mmap() */
1316
1317#define IS_MMAPPED 0x2
1318
1319/* Bits to mask off when extracting size */
1320
1321#define SIZE_BITS (PREV_INUSE|IS_MMAPPED)
1322
1323
1324/* Ptr to next physical malloc_chunk. */
1325
1326#define next_chunk(p) ((mchunkptr)( ((char*)(p)) + ((p)->size & ~PREV_INUSE) ))
1327
1328/* Ptr to previous physical malloc_chunk */
1329
1330#define prev_chunk(p)\
1331 ((mchunkptr)( ((char*)(p)) - ((p)->prev_size) ))
1332
1333
1334/* Treat space at ptr + offset as a chunk */
1335
1336#define chunk_at_offset(p, s) ((mchunkptr)(((char*)(p)) + (s)))
1337
1338
1339\f
1340
1341/*
1342 Dealing with use bits
1343*/
1344
1345/* extract p's inuse bit */
1346
1347#define inuse(p)\
1348((((mchunkptr)(((char*)(p))+((p)->size & ~PREV_INUSE)))->size) & PREV_INUSE)
1349
1350/* extract inuse bit of previous chunk */
1351
1352#define prev_inuse(p) ((p)->size & PREV_INUSE)
1353
1354/* check for mmap()'ed chunk */
1355
1356#define chunk_is_mmapped(p) ((p)->size & IS_MMAPPED)
1357
1358/* set/clear chunk as in use without otherwise disturbing */
1359
1360#define set_inuse(p)\
1361((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size |= PREV_INUSE
1362
1363#define clear_inuse(p)\
1364((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size &= ~(PREV_INUSE)
1365
1366/* check/set/clear inuse bits in known places */
1367
1368#define inuse_bit_at_offset(p, s)\
1369 (((mchunkptr)(((char*)(p)) + (s)))->size & PREV_INUSE)
1370
1371#define set_inuse_bit_at_offset(p, s)\
1372 (((mchunkptr)(((char*)(p)) + (s)))->size |= PREV_INUSE)
1373
1374#define clear_inuse_bit_at_offset(p, s)\
1375 (((mchunkptr)(((char*)(p)) + (s)))->size &= ~(PREV_INUSE))
1376
1377
1378\f
1379
1380/*
1381 Dealing with size fields
1382*/
1383
1384/* Get size, ignoring use bits */
1385
1386#define chunksize(p) ((p)->size & ~(SIZE_BITS))
1387
1388/* Set size at head, without disturbing its use bit */
1389
1390#define set_head_size(p, s) ((p)->size = (((p)->size & PREV_INUSE) | (s)))
1391
1392/* Set size/use ignoring previous bits in header */
1393
1394#define set_head(p, s) ((p)->size = (s))
1395
1396/* Set size at footer (only when chunk is not in use) */
1397
1398#define set_foot(p, s) (((mchunkptr)((char*)(p) + (s)))->prev_size = (s))
1399
1400
1401\f
1402
1403
1404/*
1405 Bins
1406
1407 The bins, `av_' are an array of pairs of pointers serving as the
1408 heads of (initially empty) doubly-linked lists of chunks, laid out
1409 in a way so that each pair can be treated as if it were in a
1410 malloc_chunk. (This way, the fd/bk offsets for linking bin heads
1411 and chunks are the same).
1412
1413 Bins for sizes < 512 bytes contain chunks of all the same size, spaced
1414 8 bytes apart. Larger bins are approximately logarithmically
1415 spaced. (See the table below.) The `av_' array is never mentioned
1416 directly in the code, but instead via bin access macros.
1417
1418 Bin layout:
1419
1420 64 bins of size 8
1421 32 bins of size 64
1422 16 bins of size 512
1423 8 bins of size 4096
1424 4 bins of size 32768
1425 2 bins of size 262144
1426 1 bin of size what's left
1427
1428 There is actually a little bit of slop in the numbers in bin_index
1429 for the sake of speed. This makes no difference elsewhere.
1430
1431 The special chunks `top' and `last_remainder' get their own bins,
1432 (this is implemented via yet more trickery with the av_ array),
1433 although `top' is never properly linked to its bin since it is
1434 always handled specially.
1435
1436*/
1437
1438#define NAV 128 /* number of bins */
1439
1440typedef struct malloc_chunk* mbinptr;
1441
1442/* access macros */
1443
1444#define bin_at(i) ((mbinptr)((char*)&(av_[2*(i) + 2]) - 2*SIZE_SZ))
1445#define next_bin(b) ((mbinptr)((char*)(b) + 2 * sizeof(mbinptr)))
1446#define prev_bin(b) ((mbinptr)((char*)(b) - 2 * sizeof(mbinptr)))
1447
1448/*
1449 The first 2 bins are never indexed. The corresponding av_ cells are instead
1450 used for bookkeeping. This is not to save space, but to simplify
1451 indexing, maintain locality, and avoid some initialization tests.
1452*/
1453
1454#define top (bin_at(0)->fd) /* The topmost chunk */
1455#define last_remainder (bin_at(1)) /* remainder from last split */
1456
1457
1458/*
1459 Because top initially points to its own bin with initial
1460 zero size, thus forcing extension on the first malloc request,
1461 we avoid having any special code in malloc to check whether
1462 it even exists yet. But we still need to in malloc_extend_top.
1463*/
1464
1465#define initial_top ((mchunkptr)(bin_at(0)))
1466
1467/* Helper macro to initialize bins */
1468
1469#define IAV(i) bin_at(i), bin_at(i)
1470
1471static mbinptr av_[NAV * 2 + 2] = {
1472 0, 0,
1473 IAV(0), IAV(1), IAV(2), IAV(3), IAV(4), IAV(5), IAV(6), IAV(7),
1474 IAV(8), IAV(9), IAV(10), IAV(11), IAV(12), IAV(13), IAV(14), IAV(15),
1475 IAV(16), IAV(17), IAV(18), IAV(19), IAV(20), IAV(21), IAV(22), IAV(23),
1476 IAV(24), IAV(25), IAV(26), IAV(27), IAV(28), IAV(29), IAV(30), IAV(31),
1477 IAV(32), IAV(33), IAV(34), IAV(35), IAV(36), IAV(37), IAV(38), IAV(39),
1478 IAV(40), IAV(41), IAV(42), IAV(43), IAV(44), IAV(45), IAV(46), IAV(47),
1479 IAV(48), IAV(49), IAV(50), IAV(51), IAV(52), IAV(53), IAV(54), IAV(55),
1480 IAV(56), IAV(57), IAV(58), IAV(59), IAV(60), IAV(61), IAV(62), IAV(63),
1481 IAV(64), IAV(65), IAV(66), IAV(67), IAV(68), IAV(69), IAV(70), IAV(71),
1482 IAV(72), IAV(73), IAV(74), IAV(75), IAV(76), IAV(77), IAV(78), IAV(79),
1483 IAV(80), IAV(81), IAV(82), IAV(83), IAV(84), IAV(85), IAV(86), IAV(87),
1484 IAV(88), IAV(89), IAV(90), IAV(91), IAV(92), IAV(93), IAV(94), IAV(95),
1485 IAV(96), IAV(97), IAV(98), IAV(99), IAV(100), IAV(101), IAV(102), IAV(103),
1486 IAV(104), IAV(105), IAV(106), IAV(107), IAV(108), IAV(109), IAV(110), IAV(111),
1487 IAV(112), IAV(113), IAV(114), IAV(115), IAV(116), IAV(117), IAV(118), IAV(119),
1488 IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127)
1489};
1490
1491\f
1492
1493/* field-extraction macros */
1494
1495#define first(b) ((b)->fd)
1496#define last(b) ((b)->bk)
1497
1498/*
1499 Indexing into bins
1500*/
1501
1502#define bin_index(sz) \
1503(((((unsigned long)(sz)) >> 9) == 0) ? (((unsigned long)(sz)) >> 3): \
1504 ((((unsigned long)(sz)) >> 9) <= 4) ? 56 + (((unsigned long)(sz)) >> 6): \
1505 ((((unsigned long)(sz)) >> 9) <= 20) ? 91 + (((unsigned long)(sz)) >> 9): \
1506 ((((unsigned long)(sz)) >> 9) <= 84) ? 110 + (((unsigned long)(sz)) >> 12): \
1507 ((((unsigned long)(sz)) >> 9) <= 340) ? 119 + (((unsigned long)(sz)) >> 15): \
1508 ((((unsigned long)(sz)) >> 9) <= 1364) ? 124 + (((unsigned long)(sz)) >> 18): \
1509 126)
1510/*
1511 bins for chunks < 512 are all spaced 8 bytes apart, and hold
1512 identically sized chunks. This is exploited in malloc.
1513*/
1514
1515#define MAX_SMALLBIN 63
1516#define MAX_SMALLBIN_SIZE 512
1517#define SMALLBIN_WIDTH 8
1518
1519#define smallbin_index(sz) (((unsigned long)(sz)) >> 3)
1520
1521/*
1522 Requests are `small' if both the corresponding and the next bin are small
1523*/
1524
1525#define is_small_request(nb) (nb < MAX_SMALLBIN_SIZE - SMALLBIN_WIDTH)
1526
1527\f
1528
1529/*
1530 To help compensate for the large number of bins, a one-level index
1531 structure is used for bin-by-bin searching. `binblocks' is a
1532 one-word bitvector recording whether groups of BINBLOCKWIDTH bins
1533 have any (possibly) non-empty bins, so they can be skipped over
1534 all at once during during traversals. The bits are NOT always
1535 cleared as soon as all bins in a block are empty, but instead only
1536 when all are noticed to be empty during traversal in malloc.
1537*/
1538
1539#define BINBLOCKWIDTH 4 /* bins per block */
1540
1541#define binblocks (bin_at(0)->size) /* bitvector of nonempty blocks */
1542
1543/* bin<->block macros */
1544
1545#define idx2binblock(ix) ((unsigned)1 << (ix / BINBLOCKWIDTH))
1546#define mark_binblock(ii) (binblocks |= idx2binblock(ii))
1547#define clear_binblock(ii) (binblocks &= ~(idx2binblock(ii)))
1548
1549
1550\f
1551
1552
1553/* Other static bookkeeping data */
1554
1555/* variables holding tunable values */
1556
1557static unsigned long trim_threshold = DEFAULT_TRIM_THRESHOLD;
1558static unsigned long top_pad = DEFAULT_TOP_PAD;
1559static unsigned int n_mmaps_max = DEFAULT_MMAP_MAX;
1560static unsigned long mmap_threshold = DEFAULT_MMAP_THRESHOLD;
1561
1562/* The first value returned from sbrk */
1563static char* sbrk_base = (char*)(-1);
1564
1565/* The maximum memory obtained from system via sbrk */
1566static unsigned long max_sbrked_mem = 0;
1567
1568/* The maximum via either sbrk or mmap */
1569static unsigned long max_total_mem = 0;
1570
1571/* internal working copy of mallinfo */
1572static struct mallinfo current_mallinfo = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
1573
1574/* The total memory obtained from system via sbrk */
1575#define sbrked_mem (current_mallinfo.arena)
1576
1577/* Tracking mmaps */
1578
1579static unsigned int n_mmaps = 0;
1580static unsigned int max_n_mmaps = 0;
1581static unsigned long mmapped_mem = 0;
1582static unsigned long max_mmapped_mem = 0;
1583
1584\f
1585
1586/*
1587 Debugging support
1588*/
1589
1590#if DEBUG
1591
1592
1593/*
1594 These routines make a number of assertions about the states
1595 of data structures that should be true at all times. If any
1596 are not true, it's very likely that a user program has somehow
1597 trashed memory. (It's also possible that there is a coding error
1598 in malloc. In which case, please report it!)
1599*/
1600
1601#if __STD_C
1602static void do_check_chunk(mchunkptr p)
1603#else
1604static void do_check_chunk(p) mchunkptr p;
1605#endif
1606{
1607 INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
1608
1609 /* No checkable chunk is mmapped */
1610 assert(!chunk_is_mmapped(p));
1611
1612 /* Check for legal address ... */
1613 assert((char*)p >= sbrk_base);
1614 if (p != top)
1615 assert((char*)p + sz <= (char*)top);
1616 else
1617 assert((char*)p + sz <= sbrk_base + sbrked_mem);
1618
1619}
1620
1621
1622#if __STD_C
1623static void do_check_free_chunk(mchunkptr p)
1624#else
1625static void do_check_free_chunk(p) mchunkptr p;
1626#endif
1627{
1628 INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
1629 mchunkptr next = chunk_at_offset(p, sz);
1630
1631 do_check_chunk(p);
1632
1633 /* Check whether it claims to be free ... */
1634 assert(!inuse(p));
1635
1636 /* Unless a special marker, must have OK fields */
1637 if ((long)sz >= (long)MINSIZE)
1638 {
1639 assert((sz & MALLOC_ALIGN_MASK) == 0);
1640 assert(aligned_OK(chunk2mem(p)));
1641 /* ... matching footer field */
1642 assert(next->prev_size == sz);
1643 /* ... and is fully consolidated */
1644 assert(prev_inuse(p));
1645 assert (next == top || inuse(next));
1646
1647 /* ... and has minimally sane links */
1648 assert(p->fd->bk == p);
1649 assert(p->bk->fd == p);
1650 }
1651 else /* markers are always of size SIZE_SZ */
1652 assert(sz == SIZE_SZ);
1653}
1654
1655#if __STD_C
1656static void do_check_inuse_chunk(mchunkptr p)
1657#else
1658static void do_check_inuse_chunk(p) mchunkptr p;
1659#endif
1660{
1661 mchunkptr next = next_chunk(p);
1662 do_check_chunk(p);
1663
1664 /* Check whether it claims to be in use ... */
1665 assert(inuse(p));
1666
1667 /* ... and is surrounded by OK chunks.
1668 Since more things can be checked with free chunks than inuse ones,
1669 if an inuse chunk borders them and debug is on, it's worth doing them.
1670 */
1671 if (!prev_inuse(p))
1672 {
1673 mchunkptr prv = prev_chunk(p);
1674 assert(next_chunk(prv) == p);
1675 do_check_free_chunk(prv);
1676 }
1677 if (next == top)
1678 {
1679 assert(prev_inuse(next));
1680 assert(chunksize(next) >= MINSIZE);
1681 }
1682 else if (!inuse(next))
1683 do_check_free_chunk(next);
1684
1685}
1686
1687#if __STD_C
1688static void do_check_malloced_chunk(mchunkptr p, INTERNAL_SIZE_T s)
1689#else
1690static void do_check_malloced_chunk(p, s) mchunkptr p; INTERNAL_SIZE_T s;
1691#endif
1692{
1693 INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
1694 long room = sz - s;
1695
1696 do_check_inuse_chunk(p);
1697
1698 /* Legal size ... */
1699 assert((long)sz >= (long)MINSIZE);
1700 assert((sz & MALLOC_ALIGN_MASK) == 0);
1701 assert(room >= 0);
1702 assert(room < (long)MINSIZE);
1703
1704 /* ... and alignment */
1705 assert(aligned_OK(chunk2mem(p)));
1706
1707
1708 /* ... and was allocated at front of an available chunk */
1709 assert(prev_inuse(p));
1710
1711}
1712
1713
1714#define check_free_chunk(P) do_check_free_chunk(P)
1715#define check_inuse_chunk(P) do_check_inuse_chunk(P)
1716#define check_chunk(P) do_check_chunk(P)
1717#define check_malloced_chunk(P,N) do_check_malloced_chunk(P,N)
1718#else
1719#define check_free_chunk(P)
1720#define check_inuse_chunk(P)
1721#define check_chunk(P)
1722#define check_malloced_chunk(P,N)
1723#endif
1724
1725\f
1726
1727/*
1728 Macro-based internal utilities
1729*/
1730
1731
1732/*
1733 Linking chunks in bin lists.
1734 Call these only with variables, not arbitrary expressions, as arguments.
1735*/
1736
1737/*
1738 Place chunk p of size s in its bin, in size order,
1739 putting it ahead of others of same size.
1740*/
1741
1742
1743#define frontlink(P, S, IDX, BK, FD) \
1744{ \
1745 if (S < MAX_SMALLBIN_SIZE) \
1746 { \
1747 IDX = smallbin_index(S); \
1748 mark_binblock(IDX); \
1749 BK = bin_at(IDX); \
1750 FD = BK->fd; \
1751 P->bk = BK; \
1752 P->fd = FD; \
1753 FD->bk = BK->fd = P; \
1754 } \
1755 else \
1756 { \
1757 IDX = bin_index(S); \
1758 BK = bin_at(IDX); \
1759 FD = BK->fd; \
1760 if (FD == BK) mark_binblock(IDX); \
1761 else \
1762 { \
1763 while (FD != BK && S < chunksize(FD)) FD = FD->fd; \
1764 BK = FD->bk; \
1765 } \
1766 P->bk = BK; \
1767 P->fd = FD; \
1768 FD->bk = BK->fd = P; \
1769 } \
1770}
1771
1772
1773/* take a chunk off a list */
1774
1775#define unlink(P, BK, FD) \
1776{ \
1777 BK = P->bk; \
1778 FD = P->fd; \
1779 FD->bk = BK; \
1780 BK->fd = FD; \
1781} \
1782
1783/* Place p as the last remainder */
1784
1785#define link_last_remainder(P) \
1786{ \
1787 last_remainder->fd = last_remainder->bk = P; \
1788 P->fd = P->bk = last_remainder; \
1789}
1790
1791/* Clear the last_remainder bin */
1792
1793#define clear_last_remainder \
1794 (last_remainder->fd = last_remainder->bk = last_remainder)
1795
1796
1797
1798\f
1799
1800
1801/* Routines dealing with mmap(). */
1802
1803#if HAVE_MMAP
1804
1805#if __STD_C
1806static mchunkptr mmap_chunk(size_t size)
1807#else
1808static mchunkptr mmap_chunk(size) size_t size;
1809#endif
1810{
1811 size_t page_mask = malloc_getpagesize - 1;
1812 mchunkptr p;
1813
1814#ifndef MAP_ANONYMOUS
1815 static int fd = -1;
1816#endif
1817
1818 if(n_mmaps >= n_mmaps_max) return 0; /* too many regions */
1819
1820 /* For mmapped chunks, the overhead is one SIZE_SZ unit larger, because
1821 * there is no following chunk whose prev_size field could be used.
1822 */
1823 size = (size + SIZE_SZ + page_mask) & ~page_mask;
1824
1825#ifdef MAP_ANONYMOUS
1826 p = (mchunkptr)mmap(0, size, PROT_READ|PROT_WRITE,
1827 MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
1828#else /* !MAP_ANONYMOUS */
1829 if (fd < 0)
1830 {
1831 fd = open("/dev/zero", O_RDWR);
1832 if(fd < 0) return 0;
1833 }
1834 p = (mchunkptr)mmap(0, size, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
1835#endif
1836
1837 if(p == (mchunkptr)-1) return 0;
1838
1839 n_mmaps++;
1840 if (n_mmaps > max_n_mmaps) max_n_mmaps = n_mmaps;
1841
1842 /* We demand that eight bytes into a page must be 8-byte aligned. */
1843 assert(aligned_OK(chunk2mem(p)));
1844
1845 /* The offset to the start of the mmapped region is stored
1846 * in the prev_size field of the chunk; normally it is zero,
1847 * but that can be changed in memalign().
1848 */
1849 p->prev_size = 0;
1850 set_head(p, size|IS_MMAPPED);
1851
1852 mmapped_mem += size;
1853 if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem)
1854 max_mmapped_mem = mmapped_mem;
1855 if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem)
1856 max_total_mem = mmapped_mem + sbrked_mem;
1857 return p;
1858}
1859
1860#if __STD_C
1861static void munmap_chunk(mchunkptr p)
1862#else
1863static void munmap_chunk(p) mchunkptr p;
1864#endif
1865{
1866 INTERNAL_SIZE_T size = chunksize(p);
1867 int ret;
1868
1869 assert (chunk_is_mmapped(p));
1870 assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem));
1871 assert((n_mmaps > 0));
1872 assert(((p->prev_size + size) & (malloc_getpagesize-1)) == 0);
1873
1874 n_mmaps--;
1875 mmapped_mem -= (size + p->prev_size);
1876
1877 ret = munmap((char *)p - p->prev_size, size + p->prev_size);
1878
1879 /* munmap returns non-zero on failure */
1880 assert(ret == 0);
1881}
1882
1883#if HAVE_MREMAP
1884
1885#if __STD_C
1886static mchunkptr mremap_chunk(mchunkptr p, size_t new_size)
1887#else
1888static mchunkptr mremap_chunk(p, new_size) mchunkptr p; size_t new_size;
1889#endif
1890{
1891 size_t page_mask = malloc_getpagesize - 1;
1892 INTERNAL_SIZE_T offset = p->prev_size;
1893 INTERNAL_SIZE_T size = chunksize(p);
1894 char *cp;
1895
1896 assert (chunk_is_mmapped(p));
1897 assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem));
1898 assert((n_mmaps > 0));
1899 assert(((size + offset) & (malloc_getpagesize-1)) == 0);
1900
1901 /* Note the extra SIZE_SZ overhead as in mmap_chunk(). */
1902 new_size = (new_size + offset + SIZE_SZ + page_mask) & ~page_mask;
1903
1904 cp = (char *)mremap((char *)p - offset, size + offset, new_size, 1);
1905
1906 if (cp == (char *)-1) return 0;
1907
1908 p = (mchunkptr)(cp + offset);
1909
1910 assert(aligned_OK(chunk2mem(p)));
1911
1912 assert((p->prev_size == offset));
1913 set_head(p, (new_size - offset)|IS_MMAPPED);
1914
1915 mmapped_mem -= size + offset;
1916 mmapped_mem += new_size;
1917 if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem)
1918 max_mmapped_mem = mmapped_mem;
1919 if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem)
1920 max_total_mem = mmapped_mem + sbrked_mem;
1921 return p;
1922}
1923
1924#endif /* HAVE_MREMAP */
1925
1926#endif /* HAVE_MMAP */
1927
1928
1929\f
1930
1931/*
1932 Extend the top-most chunk by obtaining memory from system.
1933 Main interface to sbrk (but see also malloc_trim).
1934*/
1935
1936#if __STD_C
1937static void malloc_extend_top(INTERNAL_SIZE_T nb)
1938#else
1939static void malloc_extend_top(nb) INTERNAL_SIZE_T nb;
1940#endif
1941{
1942 char* brk; /* return value from sbrk */
1943 INTERNAL_SIZE_T front_misalign; /* unusable bytes at front of sbrked space */
1944 INTERNAL_SIZE_T correction; /* bytes for 2nd sbrk call */
1945 char* new_brk; /* return of 2nd sbrk call */
1946 INTERNAL_SIZE_T top_size; /* new size of top chunk */
1947
1948 mchunkptr old_top = top; /* Record state of old top */
1949 INTERNAL_SIZE_T old_top_size = chunksize(old_top);
1950 char* old_end = (char*)(chunk_at_offset(old_top, old_top_size));
1951
1952 /* Pad request with top_pad plus minimal overhead */
1953
1954 INTERNAL_SIZE_T sbrk_size = nb + top_pad + MINSIZE;
1955 unsigned long pagesz = malloc_getpagesize;
1956
1957 /* If not the first time through, round to preserve page boundary */
1958 /* Otherwise, we need to correct to a page size below anyway. */
1959 /* (We also correct below if an intervening foreign sbrk call.) */
1960
1961 if (sbrk_base != (char*)(-1))
1962 sbrk_size = (sbrk_size + (pagesz - 1)) & ~(pagesz - 1);
1963
1964 brk = (char*)(MORECORE (sbrk_size));
1965
1966 /* Fail if sbrk failed or if a foreign sbrk call killed our space */
1967 if (brk == (char*)(MORECORE_FAILURE) ||
1968 (brk < old_end && old_top != initial_top))
1969 return;
1970
1971 sbrked_mem += sbrk_size;
1972
1973 if (brk == old_end) /* can just add bytes to current top */
1974 {
1975 top_size = sbrk_size + old_top_size;
1976 set_head(top, top_size | PREV_INUSE);
1977 }
1978 else
1979 {
1980 if (sbrk_base == (char*)(-1)) /* First time through. Record base */
1981 sbrk_base = brk;
1982 else /* Someone else called sbrk(). Count those bytes as sbrked_mem. */
1983 sbrked_mem += brk - (char*)old_end;
1984
1985 /* Guarantee alignment of first new chunk made from this space */
1986 front_misalign = (unsigned long)chunk2mem(brk) & MALLOC_ALIGN_MASK;
1987 if (front_misalign > 0)
1988 {
1989 correction = (MALLOC_ALIGNMENT) - front_misalign;
1990 brk += correction;
1991 }
1992 else
1993 correction = 0;
1994
1995 /* Guarantee the next brk will be at a page boundary */
1996
1997 correction += ((((unsigned long)(brk + sbrk_size))+(pagesz-1)) &
1998 ~(pagesz - 1)) - ((unsigned long)(brk + sbrk_size));
1999
2000 /* Allocate correction */
2001 new_brk = (char*)(MORECORE (correction));
2002 if (new_brk == (char*)(MORECORE_FAILURE)) return;
2003
2004 sbrked_mem += correction;
2005
2006 top = (mchunkptr)brk;
2007 top_size = new_brk - brk + correction;
2008 set_head(top, top_size | PREV_INUSE);
2009
2010 if (old_top != initial_top)
2011 {
2012
2013 /* There must have been an intervening foreign sbrk call. */
2014 /* A double fencepost is necessary to prevent consolidation */
2015
2016 /* If not enough space to do this, then user did something very wrong */
2017 if (old_top_size < MINSIZE)
2018 {
2019 set_head(top, PREV_INUSE); /* will force null return from malloc */
2020 return;
2021 }
2022
2023 /* Also keep size a multiple of MALLOC_ALIGNMENT */
2024 old_top_size = (old_top_size - 3*SIZE_SZ) & ~MALLOC_ALIGN_MASK;
2025 set_head_size(old_top, old_top_size);
2026 chunk_at_offset(old_top, old_top_size )->size =
2027 SIZE_SZ|PREV_INUSE;
2028 chunk_at_offset(old_top, old_top_size + SIZE_SZ)->size =
2029 SIZE_SZ|PREV_INUSE;
2030 /* If possible, release the rest. */
2031 if (old_top_size >= MINSIZE)
2032 fREe(chunk2mem(old_top));
2033 }
2034 }
2035
2036 if ((unsigned long)sbrked_mem > (unsigned long)max_sbrked_mem)
2037 max_sbrked_mem = sbrked_mem;
2038 if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem)
2039 max_total_mem = mmapped_mem + sbrked_mem;
2040
2041 /* We always land on a page boundary */
2042 assert(((unsigned long)((char*)top + top_size) & (pagesz - 1)) == 0);
2043}
2044
2045
2046\f
2047
2048/* Main public routines */
2049
2050
2051/*
2052 Malloc Algorthim:
2053
2054 The requested size is first converted into a usable form, `nb'.
2055 This currently means to add 4 bytes overhead plus possibly more to
2056 obtain 8-byte alignment and/or to obtain a size of at least
2057 MINSIZE (currently 16 bytes), the smallest allocatable size.
2058 (All fits are considered `exact' if they are within MINSIZE bytes.)
2059
2060 From there, the first successful of the following steps is taken:
2061
2062 1. The bin corresponding to the request size is scanned, and if
2063 a chunk of exactly the right size is found, it is taken.
2064
2065 2. The most recently remaindered chunk is used if it is big
2066 enough. This is a form of (roving) first fit, used only in
2067 the absence of exact fits. Runs of consecutive requests use
2068 the remainder of the chunk used for the previous such request
2069 whenever possible. This limited use of a first-fit style
2070 allocation strategy tends to give contiguous chunks
2071 coextensive lifetimes, which improves locality and can reduce
2072 fragmentation in the long run.
2073
2074 3. Other bins are scanned in increasing size order, using a
2075 chunk big enough to fulfill the request, and splitting off
2076 any remainder. This search is strictly by best-fit; i.e.,
2077 the smallest (with ties going to approximately the least
2078 recently used) chunk that fits is selected.
2079
2080 4. If large enough, the chunk bordering the end of memory
2081 (`top') is split off. (This use of `top' is in accord with
2082 the best-fit search rule. In effect, `top' is treated as
2083 larger (and thus less well fitting) than any other available
2084 chunk since it can be extended to be as large as necessary
2085 (up to system limitations).
2086
2087 5. If the request size meets the mmap threshold and the
2088 system supports mmap, and there are few enough currently
2089 allocated mmapped regions, and a call to mmap succeeds,
2090 the request is allocated via direct memory mapping.
2091
2092 6. Otherwise, the top of memory is extended by
2093 obtaining more space from the system (normally using sbrk,
2094 but definable to anything else via the MORECORE macro).
2095 Memory is gathered from the system (in system page-sized
2096 units) in a way that allows chunks obtained across different
2097 sbrk calls to be consolidated, but does not require
2098 contiguous memory. Thus, it should be safe to intersperse
2099 mallocs with other sbrk calls.
2100
2101
2102 All allocations are made from the the `lowest' part of any found
2103 chunk. (The implementation invariant is that prev_inuse is
2104 always true of any allocated chunk; i.e., that each allocated
2105 chunk borders either a previously allocated and still in-use chunk,
2106 or the base of its memory arena.)
2107
2108*/
2109
2110#if __STD_C
2111Void_t* mALLOc(size_t bytes)
2112#else
2113Void_t* mALLOc(bytes) size_t bytes;
2114#endif
2115{
2116 mchunkptr victim; /* inspected/selected chunk */
2117 INTERNAL_SIZE_T victim_size; /* its size */
2118 int idx; /* index for bin traversal */
2119 mbinptr bin; /* associated bin */
2120 mchunkptr remainder; /* remainder from a split */
2121 long remainder_size; /* its size */
2122 int remainder_index; /* its bin index */
2123 unsigned long block; /* block traverser bit */
2124 int startidx; /* first bin of a traversed block */
2125 mchunkptr fwd; /* misc temp for linking */
2126 mchunkptr bck; /* misc temp for linking */
2127 mbinptr q; /* misc temp */
2128
2129 INTERNAL_SIZE_T nb;
2130
2131 if ((long)bytes < 0) return 0;
2132
2133 nb = request2size(bytes); /* padded request size; */
2134
2135 /* Check for exact match in a bin */
2136
2137 if (is_small_request(nb)) /* Faster version for small requests */
2138 {
2139 idx = smallbin_index(nb);
2140
2141 /* No traversal or size check necessary for small bins. */
2142
2143 q = bin_at(idx);
2144 victim = last(q);
2145
2146 /* Also scan the next one, since it would have a remainder < MINSIZE */
2147 if (victim == q)
2148 {
2149 q = next_bin(q);
2150 victim = last(q);
2151 }
2152 if (victim != q)
2153 {
2154 victim_size = chunksize(victim);
2155 unlink(victim, bck, fwd);
2156 set_inuse_bit_at_offset(victim, victim_size);
2157 check_malloced_chunk(victim, nb);
2158 return chunk2mem(victim);
2159 }
2160
2161 idx += 2; /* Set for bin scan below. We've already scanned 2 bins. */
2162
2163 }
2164 else
2165 {
2166 idx = bin_index(nb);
2167 bin = bin_at(idx);
2168
2169 for (victim = last(bin); victim != bin; victim = victim->bk)
2170 {
2171 victim_size = chunksize(victim);
2172 remainder_size = victim_size - nb;
2173
2174 if (remainder_size >= (long)MINSIZE) /* too big */
2175 {
2176 --idx; /* adjust to rescan below after checking last remainder */
2177 break;
2178 }
2179
2180 else if (remainder_size >= 0) /* exact fit */
2181 {
2182 unlink(victim, bck, fwd);
2183 set_inuse_bit_at_offset(victim, victim_size);
2184 check_malloced_chunk(victim, nb);
2185 return chunk2mem(victim);
2186 }
2187 }
2188
2189 ++idx;
2190
2191 }
2192
2193 /* Try to use the last split-off remainder */
2194
2195 if ( (victim = last_remainder->fd) != last_remainder)
2196 {
2197 victim_size = chunksize(victim);
2198 remainder_size = victim_size - nb;
2199
2200 if (remainder_size >= (long)MINSIZE) /* re-split */
2201 {
2202 remainder = chunk_at_offset(victim, nb);
2203 set_head(victim, nb | PREV_INUSE);
2204 link_last_remainder(remainder);
2205 set_head(remainder, remainder_size | PREV_INUSE);
2206 set_foot(remainder, remainder_size);
2207 check_malloced_chunk(victim, nb);
2208 return chunk2mem(victim);
2209 }
2210
2211 clear_last_remainder;
2212
2213 if (remainder_size >= 0) /* exhaust */
2214 {
2215 set_inuse_bit_at_offset(victim, victim_size);
2216 check_malloced_chunk(victim, nb);
2217 return chunk2mem(victim);
2218 }
2219
2220 /* Else place in bin */
2221
2222 frontlink(victim, victim_size, remainder_index, bck, fwd);
2223 }
2224
2225 /*
2226 If there are any possibly nonempty big-enough blocks,
2227 search for best fitting chunk by scanning bins in blockwidth units.
2228 */
2229
2230 if ( (block = idx2binblock(idx)) <= binblocks)
2231 {
2232
2233 /* Get to the first marked block */
2234
2235 if ( (block & binblocks) == 0)
2236 {
2237 /* force to an even block boundary */
2238 idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH;
2239 block <<= 1;
2240 while ((block & binblocks) == 0)
2241 {
2242 idx += BINBLOCKWIDTH;
2243 block <<= 1;
2244 }
2245 }
2246
2247 /* For each possibly nonempty block ... */
2248 for (;;)
2249 {
2250 startidx = idx; /* (track incomplete blocks) */
2251 q = bin = bin_at(idx);
2252
2253 /* For each bin in this block ... */
2254 do
2255 {
2256 /* Find and use first big enough chunk ... */
2257
2258 for (victim = last(bin); victim != bin; victim = victim->bk)
2259 {
2260 victim_size = chunksize(victim);
2261 remainder_size = victim_size - nb;
2262
2263 if (remainder_size >= (long)MINSIZE) /* split */
2264 {
2265 remainder = chunk_at_offset(victim, nb);
2266 set_head(victim, nb | PREV_INUSE);
2267 unlink(victim, bck, fwd);
2268 link_last_remainder(remainder);
2269 set_head(remainder, remainder_size | PREV_INUSE);
2270 set_foot(remainder, remainder_size);
2271 check_malloced_chunk(victim, nb);
2272 return chunk2mem(victim);
2273 }
2274
2275 else if (remainder_size >= 0) /* take */
2276 {
2277 set_inuse_bit_at_offset(victim, victim_size);
2278 unlink(victim, bck, fwd);
2279 check_malloced_chunk(victim, nb);
2280 return chunk2mem(victim);
2281 }
2282
2283 }
2284
2285 bin = next_bin(bin);
2286
2287 } while ((++idx & (BINBLOCKWIDTH - 1)) != 0);
2288
2289 /* Clear out the block bit. */
2290
2291 do /* Possibly backtrack to try to clear a partial block */
2292 {
2293 if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
2294 {
2295 binblocks &= ~block;
2296 break;
2297 }
2298 --startidx;
2299 q = prev_bin(q);
2300 } while (first(q) == q);
2301
2302 /* Get to the next possibly nonempty block */
2303
2304 if ( (block <<= 1) <= binblocks && (block != 0) )
2305 {
2306 while ((block & binblocks) == 0)
2307 {
2308 idx += BINBLOCKWIDTH;
2309 block <<= 1;
2310 }
2311 }
2312 else
2313 break;
2314 }
2315 }
2316
2317
2318 /* Try to use top chunk */
2319
2320 /* Require that there be a remainder, ensuring top always exists */
2321 if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE)
2322 {
2323
2324#if HAVE_MMAP
2325 /* If big and would otherwise need to extend, try to use mmap instead */
2326 if ((unsigned long)nb >= (unsigned long)mmap_threshold &&
2327 (victim = mmap_chunk(nb)) != 0)
2328 return chunk2mem(victim);
2329#endif
2330
2331 /* Try to extend */
2332 malloc_extend_top(nb);
2333 if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE)
2334 return 0; /* propagate failure */
2335 }
2336
2337 victim = top;
2338 set_head(victim, nb | PREV_INUSE);
2339 top = chunk_at_offset(victim, nb);
2340 set_head(top, remainder_size | PREV_INUSE);
2341 check_malloced_chunk(victim, nb);
2342 return chunk2mem(victim);
2343
2344}
2345
2346
2347\f
2348
2349/*
2350
2351 free() algorithm :
2352
2353 cases:
2354
2355 1. free(0) has no effect.
2356
2357 2. If the chunk was allocated via mmap, it is release via munmap().
2358
2359 3. If a returned chunk borders the current high end of memory,
2360 it is consolidated into the top, and if the total unused
2361 topmost memory exceeds the trim threshold, malloc_trim is
2362 called.
2363
2364 4. Other chunks are consolidated as they arrive, and
2365 placed in corresponding bins. (This includes the case of
2366 consolidating with the current `last_remainder').
2367
2368*/
2369
2370
2371#if __STD_C
2372void fREe(Void_t* mem)
2373#else
2374void fREe(mem) Void_t* mem;
2375#endif
2376{
2377 mchunkptr p; /* chunk corresponding to mem */
2378 INTERNAL_SIZE_T hd; /* its head field */
2379 INTERNAL_SIZE_T sz; /* its size */
2380 int idx; /* its bin index */
2381 mchunkptr next; /* next contiguous chunk */
2382 INTERNAL_SIZE_T nextsz; /* its size */
2383 INTERNAL_SIZE_T prevsz; /* size of previous contiguous chunk */
2384 mchunkptr bck; /* misc temp for linking */
2385 mchunkptr fwd; /* misc temp for linking */
2386 int islr; /* track whether merging with last_remainder */
2387
2388 if (mem == 0) /* free(0) has no effect */
2389 return;
2390
2391 p = mem2chunk(mem);
2392 hd = p->size;
2393
2394#if HAVE_MMAP
2395 if (hd & IS_MMAPPED) /* release mmapped memory. */
2396 {
2397 munmap_chunk(p);
2398 return;
2399 }
2400#endif
2401
2402 check_inuse_chunk(p);
2403
2404 sz = hd & ~PREV_INUSE;
2405 next = chunk_at_offset(p, sz);
2406 nextsz = chunksize(next);
2407
2408 if (next == top) /* merge with top */
2409 {
2410 sz += nextsz;
2411
2412 if (!(hd & PREV_INUSE)) /* consolidate backward */
2413 {
2414 prevsz = p->prev_size;
2415 p = chunk_at_offset(p, -((long) prevsz));
2416 sz += prevsz;
2417 unlink(p, bck, fwd);
2418 }
2419
2420 set_head(p, sz | PREV_INUSE);
2421 top = p;
2422 if ((unsigned long)(sz) >= (unsigned long)trim_threshold)
2423 malloc_trim(top_pad);
2424 return;
2425 }
2426
2427 set_head(next, nextsz); /* clear inuse bit */
2428
2429 islr = 0;
2430
2431 if (!(hd & PREV_INUSE)) /* consolidate backward */
2432 {
2433 prevsz = p->prev_size;
2434 p = chunk_at_offset(p, -((long) prevsz));
2435 sz += prevsz;
2436
2437 if (p->fd == last_remainder) /* keep as last_remainder */
2438 islr = 1;
2439 else
2440 unlink(p, bck, fwd);
2441 }
2442
2443 if (!(inuse_bit_at_offset(next, nextsz))) /* consolidate forward */
2444 {
2445 sz += nextsz;
2446
2447 if (!islr && next->fd == last_remainder) /* re-insert last_remainder */
2448 {
2449 islr = 1;
2450 link_last_remainder(p);
2451 }
2452 else
2453 unlink(next, bck, fwd);
2454 }
2455
2456
2457 set_head(p, sz | PREV_INUSE);
2458 set_foot(p, sz);
2459 if (!islr)
2460 frontlink(p, sz, idx, bck, fwd);
2461}
2462
2463
2464\f
2465
2466
2467/*
2468
2469 Realloc algorithm:
2470
2471 Chunks that were obtained via mmap cannot be extended or shrunk
2472 unless HAVE_MREMAP is defined, in which case mremap is used.
2473 Otherwise, if their reallocation is for additional space, they are
2474 copied. If for less, they are just left alone.
2475
2476 Otherwise, if the reallocation is for additional space, and the
2477 chunk can be extended, it is, else a malloc-copy-free sequence is
2478 taken. There are several different ways that a chunk could be
2479 extended. All are tried:
2480
2481 * Extending forward into following adjacent free chunk.
2482 * Shifting backwards, joining preceding adjacent space
2483 * Both shifting backwards and extending forward.
2484 * Extending into newly sbrked space
2485
2486 Unless the #define REALLOC_ZERO_BYTES_FREES is set, realloc with a
2487 size argument of zero (re)allocates a minimum-sized chunk.
2488
2489 If the reallocation is for less space, and the new request is for
2490 a `small' (<512 bytes) size, then the newly unused space is lopped
2491 off and freed.
2492
2493 The old unix realloc convention of allowing the last-free'd chunk
2494 to be used as an argument to realloc is no longer supported.
2495 I don't know of any programs still relying on this feature,
2496 and allowing it would also allow too many other incorrect
2497 usages of realloc to be sensible.
2498
2499
2500*/
2501
2502
2503#if __STD_C
2504Void_t* rEALLOc(Void_t* oldmem, size_t bytes)
2505#else
2506Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes;
2507#endif
2508{
2509 INTERNAL_SIZE_T nb; /* padded request size */
2510
2511 mchunkptr oldp; /* chunk corresponding to oldmem */
2512 INTERNAL_SIZE_T oldsize; /* its size */
2513
2514 mchunkptr newp; /* chunk to return */
2515 INTERNAL_SIZE_T newsize; /* its size */
2516 Void_t* newmem; /* corresponding user mem */
2517
2518 mchunkptr next; /* next contiguous chunk after oldp */
2519 INTERNAL_SIZE_T nextsize; /* its size */
2520
2521 mchunkptr prev; /* previous contiguous chunk before oldp */
2522 INTERNAL_SIZE_T prevsize; /* its size */
2523
2524 mchunkptr remainder; /* holds split off extra space from newp */
2525 INTERNAL_SIZE_T remainder_size; /* its size */
2526
2527 mchunkptr bck; /* misc temp for linking */
2528 mchunkptr fwd; /* misc temp for linking */
2529
2530#ifdef REALLOC_ZERO_BYTES_FREES
2531 if (bytes == 0) { fREe(oldmem); return 0; }
2532#endif
2533
2534 if ((long)bytes < 0) return 0;
2535
2536 /* realloc of null is supposed to be same as malloc */
2537 if (oldmem == 0) return mALLOc(bytes);
2538
2539 newp = oldp = mem2chunk(oldmem);
2540 newsize = oldsize = chunksize(oldp);
2541
2542
2543 nb = request2size(bytes);
2544
2545#if HAVE_MMAP
2546 if (chunk_is_mmapped(oldp))
2547 {
2548#if HAVE_MREMAP
2549 newp = mremap_chunk(oldp, nb);
2550 if(newp) return chunk2mem(newp);
2551#endif
2552 /* Note the extra SIZE_SZ overhead. */
2553 if(oldsize - SIZE_SZ >= nb) return oldmem; /* do nothing */
2554 /* Must alloc, copy, free. */
2555 newmem = mALLOc(bytes);
2556 if (newmem == 0) return 0; /* propagate failure */
2557 MALLOC_COPY(newmem, oldmem, oldsize - 2*SIZE_SZ);
2558 munmap_chunk(oldp);
2559 return newmem;
2560 }
2561#endif
2562
2563 check_inuse_chunk(oldp);
2564
2565 if ((long)(oldsize) < (long)(nb))
2566 {
2567
2568 /* Try expanding forward */
2569
2570 next = chunk_at_offset(oldp, oldsize);
2571 if (next == top || !inuse(next))
2572 {
2573 nextsize = chunksize(next);
2574
2575 /* Forward into top only if a remainder */
2576 if (next == top)
2577 {
2578 if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE))
2579 {
2580 newsize += nextsize;
2581 top = chunk_at_offset(oldp, nb);
2582 set_head(top, (newsize - nb) | PREV_INUSE);
2583 set_head_size(oldp, nb);
2584 return chunk2mem(oldp);
2585 }
2586 }
2587
2588 /* Forward into next chunk */
2589 else if (((long)(nextsize + newsize) >= (long)(nb)))
2590 {
2591 unlink(next, bck, fwd);
2592 newsize += nextsize;
2593 goto split;
2594 }
2595 }
2596 else
2597 {
2598 next = 0;
2599 nextsize = 0;
2600 }
2601
2602 /* Try shifting backwards. */
2603
2604 if (!prev_inuse(oldp))
2605 {
2606 prev = prev_chunk(oldp);
2607 prevsize = chunksize(prev);
2608
2609 /* try forward + backward first to save a later consolidation */
2610
2611 if (next != 0)
2612 {
2613 /* into top */
2614 if (next == top)
2615 {
2616 if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE))
2617 {
2618 unlink(prev, bck, fwd);
2619 newp = prev;
2620 newsize += prevsize + nextsize;
2621 newmem = chunk2mem(newp);
2622 MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
2623 top = chunk_at_offset(newp, nb);
2624 set_head(top, (newsize - nb) | PREV_INUSE);
2625 set_head_size(newp, nb);
2626 return newmem;
2627 }
2628 }
2629
2630 /* into next chunk */
2631 else if (((long)(nextsize + prevsize + newsize) >= (long)(nb)))
2632 {
2633 unlink(next, bck, fwd);
2634 unlink(prev, bck, fwd);
2635 newp = prev;
2636 newsize += nextsize + prevsize;
2637 newmem = chunk2mem(newp);
2638 MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
2639 goto split;
2640 }
2641 }
2642
2643 /* backward only */
2644 if (prev != 0 && (long)(prevsize + newsize) >= (long)nb)
2645 {
2646 unlink(prev, bck, fwd);
2647 newp = prev;
2648 newsize += prevsize;
2649 newmem = chunk2mem(newp);
2650 MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
2651 goto split;
2652 }
2653 }
2654
2655 /* Must allocate */
2656
2657 newmem = mALLOc (bytes);
2658
2659 if (newmem == 0) /* propagate failure */
2660 return 0;
2661
2662 /* Avoid copy if newp is next chunk after oldp. */
2663 /* (This can only happen when new chunk is sbrk'ed.) */
2664
2665 if ( (newp = mem2chunk(newmem)) == next_chunk(oldp))
2666 {
2667 newsize += chunksize(newp);
2668 newp = oldp;
2669 goto split;
2670 }
2671
2672 /* Otherwise copy, free, and exit */
2673 MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
2674 fREe(oldmem);
2675 return newmem;
2676 }
2677
2678
2679 split: /* split off extra room in old or expanded chunk */
2680
2681 if (newsize - nb >= MINSIZE) /* split off remainder */
2682 {
2683 remainder = chunk_at_offset(newp, nb);
2684 remainder_size = newsize - nb;
2685 set_head_size(newp, nb);
2686 set_head(remainder, remainder_size | PREV_INUSE);
2687 set_inuse_bit_at_offset(remainder, remainder_size);
2688 fREe(chunk2mem(remainder)); /* let free() deal with it */
2689 }
2690 else
2691 {
2692 set_head_size(newp, newsize);
2693 set_inuse_bit_at_offset(newp, newsize);
2694 }
2695
2696 check_inuse_chunk(newp);
2697 return chunk2mem(newp);
2698}
2699
2700
2701\f
2702
2703/*
2704
2705 memalign algorithm:
2706
2707 memalign requests more than enough space from malloc, finds a spot
2708 within that chunk that meets the alignment request, and then
2709 possibly frees the leading and trailing space.
2710
2711 The alignment argument must be a power of two. This property is not
2712 checked by memalign, so misuse may result in random runtime errors.
2713
2714 8-byte alignment is guaranteed by normal malloc calls, so don't
2715 bother calling memalign with an argument of 8 or less.
2716
2717 Overreliance on memalign is a sure way to fragment space.
2718
2719*/
2720
2721
2722#if __STD_C
2723Void_t* mEMALIGn(size_t alignment, size_t bytes)
2724#else
2725Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes;
2726#endif
2727{
2728 INTERNAL_SIZE_T nb; /* padded request size */
2729 char* m; /* memory returned by malloc call */
2730 mchunkptr p; /* corresponding chunk */
2731 char* brk; /* alignment point within p */
2732 mchunkptr newp; /* chunk to return */
2733 INTERNAL_SIZE_T newsize; /* its size */
2734 INTERNAL_SIZE_T leadsize; /* leading space befor alignment point */
2735 mchunkptr remainder; /* spare room at end to split off */
2736 long remainder_size; /* its size */
2737
2738 if ((long)bytes < 0) return 0;
2739
2740 /* If need less alignment than we give anyway, just relay to malloc */
2741
2742 if (alignment <= MALLOC_ALIGNMENT) return mALLOc(bytes);
2743
2744 /* Otherwise, ensure that it is at least a minimum chunk size */
2745
2746 if (alignment < MINSIZE) alignment = MINSIZE;
2747
2748 /* Call malloc with worst case padding to hit alignment. */
2749
2750 nb = request2size(bytes);
2751 m = (char*)(mALLOc(nb + alignment + MINSIZE));
2752
2753 if (m == 0) return 0; /* propagate failure */
2754
2755 p = mem2chunk(m);
2756
2757 if ((((unsigned long)(m)) % alignment) == 0) /* aligned */
2758 {
2759#if HAVE_MMAP
2760 if(chunk_is_mmapped(p))
2761 return chunk2mem(p); /* nothing more to do */
2762#endif
2763 }
2764 else /* misaligned */
2765 {
2766 /*
2767 Find an aligned spot inside chunk.
2768 Since we need to give back leading space in a chunk of at
2769 least MINSIZE, if the first calculation places us at
2770 a spot with less than MINSIZE leader, we can move to the
2771 next aligned spot -- we've allocated enough total room so that
2772 this is always possible.
2773 */
2774
2775 brk = (char*)mem2chunk(((unsigned long)(m + alignment - 1)) & -((signed) alignment));
2776 if ((long)(brk - (char*)(p)) < MINSIZE) brk = brk + alignment;
2777
2778 newp = (mchunkptr)brk;
2779 leadsize = brk - (char*)(p);
2780 newsize = chunksize(p) - leadsize;
2781
2782#if HAVE_MMAP
2783 if(chunk_is_mmapped(p))
2784 {
2785 newp->prev_size = p->prev_size + leadsize;
2786 set_head(newp, newsize|IS_MMAPPED);
2787 return chunk2mem(newp);
2788 }
2789#endif
2790
2791 /* give back leader, use the rest */
2792
2793 set_head(newp, newsize | PREV_INUSE);
2794 set_inuse_bit_at_offset(newp, newsize);
2795 set_head_size(p, leadsize);
2796 fREe(chunk2mem(p));
2797 p = newp;
2798
2799 assert (newsize >= nb && (((unsigned long)(chunk2mem(p))) % alignment) == 0);
2800 }
2801
2802 /* Also give back spare room at the end */
2803
2804 remainder_size = chunksize(p) - nb;
2805
2806 if (remainder_size >= (long)MINSIZE)
2807 {
2808 remainder = chunk_at_offset(p, nb);
2809 set_head(remainder, remainder_size | PREV_INUSE);
2810 set_head_size(p, nb);
2811 fREe(chunk2mem(remainder));
2812 }
2813
2814 check_inuse_chunk(p);
2815 return chunk2mem(p);
2816
2817}
2818
2819\f
2820
2821
2822/*
2823 valloc just invokes memalign with alignment argument equal
2824 to the page size of the system (or as near to this as can
2825 be figured out from all the includes/defines above.)
2826*/
2827
2828#if __STD_C
2829Void_t* vALLOc(size_t bytes)
2830#else
2831Void_t* vALLOc(bytes) size_t bytes;
2832#endif
2833{
2834 return mEMALIGn (malloc_getpagesize, bytes);
2835}
2836
2837/*
2838 pvalloc just invokes valloc for the nearest pagesize
2839 that will accommodate request
2840*/
2841
2842
2843#if __STD_C
2844Void_t* pvALLOc(size_t bytes)
2845#else
2846Void_t* pvALLOc(bytes) size_t bytes;
2847#endif
2848{
2849 size_t pagesize = malloc_getpagesize;
2850 return mEMALIGn (pagesize, (bytes + pagesize - 1) & ~(pagesize - 1));
2851}
2852
2853/*
2854
2855 calloc calls malloc, then zeroes out the allocated chunk.
2856
2857*/
2858
2859#if __STD_C
2860Void_t* cALLOc(size_t n, size_t elem_size)
2861#else
2862Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size;
2863#endif
2864{
2865 mchunkptr p;
2866 INTERNAL_SIZE_T csz;
2867
2868 INTERNAL_SIZE_T sz = n * elem_size;
2869
2870
2871 /* check if expand_top called, in which case don't need to clear */
2872#if MORECORE_CLEARS
2873 mchunkptr oldtop = top;
2874 INTERNAL_SIZE_T oldtopsize = chunksize(top);
2875#endif
2876 Void_t* mem = mALLOc (sz);
2877
2878 if ((long)n < 0) return 0;
2879
2880 if (mem == 0)
2881 return 0;
2882 else
2883 {
2884 p = mem2chunk(mem);
2885
2886 /* Two optional cases in which clearing not necessary */
2887
2888
2889#if HAVE_MMAP
2890 if (chunk_is_mmapped(p)) return mem;
2891#endif
2892
2893 csz = chunksize(p);
2894
2895#if MORECORE_CLEARS
2896 if (p == oldtop && csz > oldtopsize)
2897 {
2898 /* clear only the bytes from non-freshly-sbrked memory */
2899 csz = oldtopsize;
2900 }
2901#endif
2902
2903 MALLOC_ZERO(mem, csz - SIZE_SZ);
2904 return mem;
2905 }
2906}
2907
2908/*
2909
2910 cfree just calls free. It is needed/defined on some systems
2911 that pair it with calloc, presumably for odd historical reasons.
2912
2913*/
2914
2915#if !defined(INTERNAL_LINUX_C_LIB) || !defined(__ELF__)
2916#if __STD_C
2917void cfree(Void_t *mem)
2918#else
2919void cfree(mem) Void_t *mem;
2920#endif
2921{
2922 fREe(mem);
2923}
2924#endif
2925
2926\f
2927
2928/*
2929
2930 Malloc_trim gives memory back to the system (via negative
2931 arguments to sbrk) if there is unused memory at the `high' end of
2932 the malloc pool. You can call this after freeing large blocks of
2933 memory to potentially reduce the system-level memory requirements
2934 of a program. However, it cannot guarantee to reduce memory. Under
2935 some allocation patterns, some large free blocks of memory will be
2936 locked between two used chunks, so they cannot be given back to
2937 the system.
2938
2939 The `pad' argument to malloc_trim represents the amount of free
2940 trailing space to leave untrimmed. If this argument is zero,
2941 only the minimum amount of memory to maintain internal data
2942 structures will be left (one page or less). Non-zero arguments
2943 can be supplied to maintain enough trailing space to service
2944 future expected allocations without having to re-obtain memory
2945 from the system.
2946
2947 Malloc_trim returns 1 if it actually released any memory, else 0.
2948
2949*/
2950
2951#if __STD_C
2952int malloc_trim(size_t pad)
2953#else
2954int malloc_trim(pad) size_t pad;
2955#endif
2956{
2957 long top_size; /* Amount of top-most memory */
2958 long extra; /* Amount to release */
2959 char* current_brk; /* address returned by pre-check sbrk call */
2960 char* new_brk; /* address returned by negative sbrk call */
2961
2962 unsigned long pagesz = malloc_getpagesize;
2963
2964 top_size = chunksize(top);
2965 extra = ((top_size - pad - MINSIZE + (pagesz-1)) / pagesz - 1) * pagesz;
2966
2967 if (extra < (long)pagesz) /* Not enough memory to release */
2968 return 0;
2969
2970 else
2971 {
2972 /* Test to make sure no one else called sbrk */
2973 current_brk = (char*)(MORECORE (0));
2974 if (current_brk != (char*)(top) + top_size)
2975 return 0; /* Apparently we don't own memory; must fail */
2976
2977 else
2978 {
2979 new_brk = (char*)(MORECORE (-extra));
2980
2981 if (new_brk == (char*)(MORECORE_FAILURE)) /* sbrk failed? */
2982 {
2983 /* Try to figure out what we have */
2984 current_brk = (char*)(MORECORE (0));
2985 top_size = current_brk - (char*)top;
2986 if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */
2987 {
2988 sbrked_mem = current_brk - sbrk_base;
2989 set_head(top, top_size | PREV_INUSE);
2990 }
2991 check_chunk(top);
2992 return 0;
2993 }
2994
2995 else
2996 {
2997 /* Success. Adjust top accordingly. */
2998 set_head(top, (top_size - extra) | PREV_INUSE);
2999 sbrked_mem -= extra;
3000 check_chunk(top);
3001 return 1;
3002 }
3003 }
3004 }
3005}
3006
3007\f
3008
3009/*
3010 malloc_usable_size:
3011
3012 This routine tells you how many bytes you can actually use in an
3013 allocated chunk, which may be more than you requested (although
3014 often not). You can use this many bytes without worrying about
3015 overwriting other allocated objects. Not a particularly great
3016 programming practice, but still sometimes useful.
3017
3018*/
3019
3020#if __STD_C
3021size_t malloc_usable_size(Void_t* mem)
3022#else
3023size_t malloc_usable_size(mem) Void_t* mem;
3024#endif
3025{
3026 mchunkptr p;
3027 if (mem == 0)
3028 return 0;
3029 else
3030 {
3031 p = mem2chunk(mem);
3032 if(!chunk_is_mmapped(p))
3033 {
3034 if (!inuse(p)) return 0;
3035 check_inuse_chunk(p);
3036 return chunksize(p) - SIZE_SZ;
3037 }
3038 return chunksize(p) - 2*SIZE_SZ;
3039 }
3040}
3041
3042
3043\f
3044
3045/* Utility to update current_mallinfo for malloc_stats and mallinfo() */
3046
3047static void malloc_update_mallinfo()
3048{
3049 int i;
3050 mbinptr b;
3051 mchunkptr p;
3052#if DEBUG
3053 mchunkptr q;
3054#endif
3055
3056 INTERNAL_SIZE_T avail = chunksize(top);
3057 int navail = ((long)(avail) >= (long)MINSIZE)? 1 : 0;
3058
3059 for (i = 1; i < NAV; ++i)
3060 {
3061 b = bin_at(i);
3062 for (p = last(b); p != b; p = p->bk)
3063 {
3064#if DEBUG
3065 check_free_chunk(p);
3066 for (q = next_chunk(p);
3067 q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE;
3068 q = next_chunk(q))
3069 check_inuse_chunk(q);
3070#endif
3071 avail += chunksize(p);
3072 navail++;
3073 }
3074 }
3075
3076 current_mallinfo.ordblks = navail;
3077 current_mallinfo.uordblks = sbrked_mem - avail;
3078 current_mallinfo.fordblks = avail;
3079 current_mallinfo.hblks = n_mmaps;
3080 current_mallinfo.hblkhd = mmapped_mem;
3081 current_mallinfo.keepcost = chunksize(top);
3082
3083}
3084
3085\f
3086
3087/*
3088
3089 malloc_stats:
3090
3091 Prints on stderr the amount of space obtain from the system (both
3092 via sbrk and mmap), the maximum amount (which may be more than
3093 current if malloc_trim and/or munmap got called), the maximum
3094 number of simultaneous mmap regions used, and the current number
3095 of bytes allocated via malloc (or realloc, etc) but not yet
3096 freed. (Note that this is the number of bytes allocated, not the
3097 number requested. It will be larger than the number requested
3098 because of alignment and bookkeeping overhead.)
3099
3100*/
3101
3102void malloc_stats()
3103{
3104 malloc_update_mallinfo();
3105 fprintf(stderr, "max system bytes = %10u\n",
3106 (unsigned int)(max_total_mem));
3107 fprintf(stderr, "system bytes = %10u\n",
3108 (unsigned int)(sbrked_mem + mmapped_mem));
3109 fprintf(stderr, "in use bytes = %10u\n",
3110 (unsigned int)(current_mallinfo.uordblks + mmapped_mem));
3111#if HAVE_MMAP
3112 fprintf(stderr, "max mmap regions = %10u\n",
3113 (unsigned int)max_n_mmaps);
3114#endif
3115}
3116
3117/*
3118 mallinfo returns a copy of updated current mallinfo.
3119*/
3120
3121struct mallinfo mALLINFo()
3122{
3123 malloc_update_mallinfo();
3124 return current_mallinfo;
3125}
3126
3127
3128\f
3129
3130/*
3131 mallopt:
3132
3133 mallopt is the general SVID/XPG interface to tunable parameters.
3134 The format is to provide a (parameter-number, parameter-value) pair.
3135 mallopt then sets the corresponding parameter to the argument
3136 value if it can (i.e., so long as the value is meaningful),
3137 and returns 1 if successful else 0.
3138
3139 See descriptions of tunable parameters above.
3140
3141*/
3142
3143#if __STD_C
3144int mALLOPt(int param_number, int value)
3145#else
3146int mALLOPt(param_number, value) int param_number; int value;
3147#endif
3148{
3149 switch(param_number)
3150 {
3151 case M_TRIM_THRESHOLD:
3152 trim_threshold = value; return 1;
3153 case M_TOP_PAD:
3154 top_pad = value; return 1;
3155 case M_MMAP_THRESHOLD:
3156 mmap_threshold = value; return 1;
3157 case M_MMAP_MAX:
3158#if HAVE_MMAP
3159 n_mmaps_max = value; return 1;
3160#else
3161 if (value != 0) return 0; else n_mmaps_max = value; return 1;
3162#endif
3163
3164 default:
3165 return 0;
3166 }
3167}
3168
3169/*
3170
3171History:
3172
3173 V2.6.6 Sun Dec 5 07:42:19 1999 Doug Lea (dl at gee)
3174 * return null for negative arguments
3175 * Added Several WIN32 cleanups from Martin C. Fong <mcfong@yahoo.com>
3176 * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h'
3177 (e.g. WIN32 platforms)
3178 * Cleanup up header file inclusion for WIN32 platforms
3179 * Cleanup code to avoid Microsoft Visual C++ compiler complaints
3180 * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing
3181 memory allocation routines
3182 * Set 'malloc_getpagesize' for WIN32 platforms (needs more work)
3183 * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to
3184 usage of 'assert' in non-WIN32 code
3185 * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to
3186 avoid infinite loop
3187 * Always call 'fREe()' rather than 'free()'
3188
3189 V2.6.5 Wed Jun 17 15:57:31 1998 Doug Lea (dl at gee)
3190 * Fixed ordering problem with boundary-stamping
3191
3192 V2.6.3 Sun May 19 08:17:58 1996 Doug Lea (dl at gee)
3193 * Added pvalloc, as recommended by H.J. Liu
3194 * Added 64bit pointer support mainly from Wolfram Gloger
3195 * Added anonymously donated WIN32 sbrk emulation
3196 * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen
3197 * malloc_extend_top: fix mask error that caused wastage after
3198 foreign sbrks
3199 * Add linux mremap support code from HJ Liu
3200
3201 V2.6.2 Tue Dec 5 06:52:55 1995 Doug Lea (dl at gee)
3202 * Integrated most documentation with the code.
3203 * Add support for mmap, with help from
3204 Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
3205 * Use last_remainder in more cases.
3206 * Pack bins using idea from colin@nyx10.cs.du.edu
3207 * Use ordered bins instead of best-fit threshhold
3208 * Eliminate block-local decls to simplify tracing and debugging.
3209 * Support another case of realloc via move into top
3210 * Fix error occuring when initial sbrk_base not word-aligned.
3211 * Rely on page size for units instead of SBRK_UNIT to
3212 avoid surprises about sbrk alignment conventions.
3213 * Add mallinfo, mallopt. Thanks to Raymond Nijssen
3214 (raymond@es.ele.tue.nl) for the suggestion.
3215 * Add `pad' argument to malloc_trim and top_pad mallopt parameter.
3216 * More precautions for cases where other routines call sbrk,
3217 courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
3218 * Added macros etc., allowing use in linux libc from
3219 H.J. Lu (hjl@gnu.ai.mit.edu)
3220 * Inverted this history list
3221
3222 V2.6.1 Sat Dec 2 14:10:57 1995 Doug Lea (dl at gee)
3223 * Re-tuned and fixed to behave more nicely with V2.6.0 changes.
3224 * Removed all preallocation code since under current scheme
3225 the work required to undo bad preallocations exceeds
3226 the work saved in good cases for most test programs.
3227 * No longer use return list or unconsolidated bins since
3228 no scheme using them consistently outperforms those that don't
3229 given above changes.
3230 * Use best fit for very large chunks to prevent some worst-cases.
3231 * Added some support for debugging
3232
3233 V2.6.0 Sat Nov 4 07:05:23 1995 Doug Lea (dl at gee)
3234 * Removed footers when chunks are in use. Thanks to
3235 Paul Wilson (wilson@cs.texas.edu) for the suggestion.
3236
3237 V2.5.4 Wed Nov 1 07:54:51 1995 Doug Lea (dl at gee)
3238 * Added malloc_trim, with help from Wolfram Gloger
3239 (wmglo@Dent.MED.Uni-Muenchen.DE).
3240
3241 V2.5.3 Tue Apr 26 10:16:01 1994 Doug Lea (dl at g)
3242
3243 V2.5.2 Tue Apr 5 16:20:40 1994 Doug Lea (dl at g)
3244 * realloc: try to expand in both directions
3245 * malloc: swap order of clean-bin strategy;
3246 * realloc: only conditionally expand backwards
3247 * Try not to scavenge used bins
3248 * Use bin counts as a guide to preallocation
3249 * Occasionally bin return list chunks in first scan
3250 * Add a few optimizations from colin@nyx10.cs.du.edu
3251
3252 V2.5.1 Sat Aug 14 15:40:43 1993 Doug Lea (dl at g)
3253 * faster bin computation & slightly different binning
3254 * merged all consolidations to one part of malloc proper
3255 (eliminating old malloc_find_space & malloc_clean_bin)
3256 * Scan 2 returns chunks (not just 1)
3257 * Propagate failure in realloc if malloc returns 0
3258 * Add stuff to allow compilation on non-ANSI compilers
3259 from kpv@research.att.com
3260
3261 V2.5 Sat Aug 7 07:41:59 1993 Doug Lea (dl at g.oswego.edu)
3262 * removed potential for odd address access in prev_chunk
3263 * removed dependency on getpagesize.h
3264 * misc cosmetics and a bit more internal documentation
3265 * anticosmetics: mangled names in macros to evade debugger strangeness
3266 * tested on sparc, hp-700, dec-mips, rs6000
3267 with gcc & native cc (hp, dec only) allowing
3268 Detlefs & Zorn comparison study (in SIGPLAN Notices.)
3269
3270 Trial version Fri Aug 28 13:14:29 1992 Doug Lea (dl at g.oswego.edu)
3271 * Based loosely on libg++-1.2X malloc. (It retains some of the overall
3272 structure of old version, but most details differ.)
3273
3274*/
3275
3276
"Das U-Boot" Source Tree