[people/ms/u-boot.git] / doc / README.fec_mxc

U-boot config options used in fec_mxc.c

CONFIG_FEC_MXC
	Selects fec_mxc.c to be compiled into u-boot.

CONFIG_MII
	Must be defined if CONFIG_FEC_MXC is defined.

CONFIG_FEC_XCV_TYPE
	Defaults to MII100 for 100 Base-tx.
	RGMII selects 1000 Base-tx reduced pin count interface.
	RMII selects 100 Base-tx reduced pin count interface.

CONFIG_FEC_MXC_SWAP_PACKET
	Forced on iff MX28.
	Swaps the bytes order of all words(4 byte units) in the packet.
	This should not be specified by a board file. It is cpu specific.

CONFIG_PHYLIB
	fec_mxc supports PHYLIB and should be used for new boards.

CONFIG_FEC_MXC_NO_ANEG
	Relevant only if PHYLIB not used. Skips auto-negotiation restart.

CONFIG_FEC_MXC_PHYADDR
	Optional, selects the exact phy address that should be connected
	and function fecmxc_initialize will try to initialize it.
Commit	Line	Data
c30eab2d TK	1	U-boot config options used in fec_mxc.c
	2
	3	CONFIG_FEC_MXC
	4	Selects fec_mxc.c to be compiled into u-boot.
	5
	6	CONFIG_MII
	7	Must be defined if CONFIG_FEC_MXC is defined.
	8
	9	CONFIG_FEC_XCV_TYPE
	10	Defaults to MII100 for 100 Base-tx.
	11	RGMII selects 1000 Base-tx reduced pin count interface.
	12	RMII selects 100 Base-tx reduced pin count interface.
	13
	14	CONFIG_FEC_MXC_SWAP_PACKET
	15	Forced on iff MX28.
	16	Swaps the bytes order of all words(4 byte units) in the packet.
	17	This should not be specified by a board file. It is cpu specific.
	18
	19	CONFIG_PHYLIB
	20	fec_mxc supports PHYLIB and should be used for new boards.
	21
	22	CONFIG_FEC_MXC_NO_ANEG
	23	Relevant only if PHYLIB not used. Skips auto-negotiation restart.
	24
	25	CONFIG_FEC_MXC_PHYADDR
	26	Optional, selects the exact phy address that should be connected
	27	and function fecmxc_initialize will try to initialize it.