projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| aa0c7a86 PW |
1 | --------------------------------------------- |
| 2 | Kirkwood Boot Image generation using mkimage | |
| 3 | --------------------------------------------- | |
| 4 | ||
| 5 | This document describes the U-Boot feature as it | |
| 6 | is implemented for the Kirkwood family of SoCs. | |
| 7 | ||
| 8 | The Kirkwood SoC's can boot directly from NAND FLASH, | |
| 9 | SPI FLASH, SATA etc. using its internal bootRom support. | |
| 10 | ||
| 11 | for more details refer section 24.2 of Kirkwood functional specifications. | |
| 12 | ref: www.marvell.com/products/embedded.../kirkwood/index.jsp | |
| 13 | ||
| 14 | Command syntax: | |
| 15 | -------------- | |
| 16 | ./tools/mkimage -l <kwboot_file> | |
| 17 | to list the kwb image file details | |
| 18 | ||
| 19 | ./tools/mkimage -n <board specific configuration file> \ | |
| 4946775c | 20 | -T kwbimage -a <start address> -e <execution address> \ |
| aa0c7a86 PW |
21 | -d <input_raw_binary> <output_kwboot_file> |
| 22 | ||
| 23 | for ex. | |
| 24 | ./tools/mkimage -n ./board/Marvell/openrd_base/kwbimage.cfg \ | |
| 4946775c | 25 | -T kwbimage -a 0x00600000 -e 0x00600000 \ |
| aa0c7a86 PW |
26 | -d u-boot.bin u-boot.kwb |
| 27 | ||
| 28 | kwimage support available with mkimage utility will generate kirkwood boot | |
| 29 | image that can be flashed on the board NAND/SPI flash | |
| 30 | ||
| 31 | Board specific configuration file specifications: | |
| 32 | ------------------------------------------------ | |
| 33 | 1. This file must present in the $(BOARDDIR) and the name should be | |
| 34 | kwbimage.cfg (since this is used in Makefile) | |
| 35 | 2. This file can have empty lines and lines starting with "#" as first | |
| 36 | character to put comments | |
| 37 | 3. This file can have configuration command lines as mentioned below, | |
| 38 | any other information in this file is treated as invalid. | |
| 39 | ||
| 40 | Configuration command line syntax: | |
| 41 | --------------------------------- | |
| 42 | 1. Each command line is must have two strings, first one command or address | |
| 43 | and second one data string | |
| 44 | 2. Following are the valid command strings and associated data strings:- | |
| 45 | Command string data string | |
| 46 | -------------- ----------- | |
| 47 | BOOT_FROM nand/spi/sata | |
| 48 | NAND_ECC_MODE default/rs/hamming/disabled | |
| 49 | NAND_PAGE_SIZE any uint16_t hex value | |
| 50 | SATA_PIO_MODE any uint32_t hex value | |
| 51 | DDR_INIT_DELAY any uint32_t hex value | |
| 52 | DATA regaddr and regdara hex value | |
| 53 | you can have maximum 55 such register programming commands | |
| 54 | ||
| 55 | 3. All commands are optional to program | |
| 56 | ||
| 57 | Typical example of kwimage.cfg file: | |
| 58 | ----------------------------------- | |
| 59 | ||
| 60 | # Boot Media configurations | |
| 61 | BOOT_FROM nand | |
| 62 | NAND_ECC_MODE default | |
| 63 | NAND_PAGE_SIZE 0x0800 | |
| 64 | ||
| 65 | # Configure RGMII-0 interface pad voltage to 1.8V | |
| 66 | DATA 0xFFD100e0 0x1b1b1b9b | |
| 67 | # DRAM Configuration | |
| 68 | DATA 0xFFD01400 0x43000c30 | |
| 69 | DATA 0xFFD01404 0x37543000 | |
| 70 | DATA 0xFFD01408 0x22125451 | |
| 71 | DATA 0xFFD0140C 0x00000a33 | |
| 72 | DATA 0xFFD01410 0x000000cc | |
| 73 | DATA 0xFFD01414 0x00000000 | |
| 74 | DATA 0xFFD01418 0x00000000 | |
| 75 | DATA 0xFFD0141C 0x00000C52 | |
| 76 | DATA 0xFFD01420 0x00000040 | |
| 77 | DATA 0xFFD01424 0x0000F17F | |
| 78 | DATA 0xFFD01428 0x00085520 | |
| 79 | DATA 0xFFD0147C 0x00008552 | |
| 80 | DATA 0xFFD01504 0x0FFFFFF1 | |
| 81 | DATA 0xFFD01508 0x10000000 | |
| 82 | DATA 0xFFD0150C 0x0FFFFFF5 | |
| 83 | DATA 0xFFD01514 0x00000000 | |
| 84 | DATA 0xFFD0151C 0x00000000 | |
| 85 | DATA 0xFFD01494 0x00030000 | |
| 86 | DATA 0xFFD01498 0x00000000 | |
| 87 | DATA 0xFFD0149C 0x0000E803 | |
| 88 | DATA 0xFFD01480 0x00000001 | |
| 89 | # End of Header extension | |
| 90 | DATA 0x0 0x0 | |
| 91 | ||
| 92 | ------------------------------------------------ | |
| 93 | Author: Prafulla Wadaskar <prafulla@marvell.com> |